git.oblomov.eu Git - linux-2.6/blob - arch/powerpc/boot/dts/pcm030.dts

   1 /*
   2  * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source
   3  *
   4  * Copyright 2006 Pengutronix
   5  * Sascha Hauer <s.hauer@pengutronix.de>
   6  * Copyright 2007 Pengutronix
   7  * Juergen Beisert <j.beisert@pengutronix.de>
   8  *
   9  * This program is free software; you can redistribute  it and/or modify it
  10  * under  the terms of  the GNU General  Public License as published by the
  11  * Free Software Foundation;  either version 2 of the  License, or (at your
  12  * option) any later version.
  13  */
  14
  15 /dts-v1/;
  16
  17 / {
  18         model = "phytec,pcm030";
  19         compatible = "phytec,pcm030";
  20         #address-cells = <1>;
  21         #size-cells = <1>;
  22
  23         cpus {
  24                 #address-cells = <1>;
  25                 #size-cells = <0>;
  26
  27                 PowerPC,5200@0 {
  28                         device_type = "cpu";
  29                         reg = <0>;
  30                         d-cache-line-size = <32>;
  31                         i-cache-line-size = <32>;
  32                         d-cache-size = <0x4000>;        /* L1, 16K          */
  33                         i-cache-size = <0x4000>;        /* L1, 16K          */
  34                         timebase-frequency = <0>;       /* From Bootloader  */
  35                         bus-frequency = <0>;            /* From Bootloader  */
  36                         clock-frequency = <0>;          /* From Bootloader  */
  37                 };
  38         };
  39
  40         memory {
  41                 device_type = "memory";
  42                 reg = <0x00000000 0x04000000>;  /* 64MB */
  43         };
  44
  45         soc5200@f0000000 {
  46                 #address-cells = <1>;
  47                 #size-cells = <1>;
  48                 compatible = "fsl,mpc5200b-immr";
  49                 ranges = <0x0 0xf0000000 0x0000c000>;
  50                 bus-frequency = <0>;            /* From bootloader */
  51                 system-frequency = <0>;         /* From bootloader */
  52
  53                 cdm@200 {
  54                         compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
  55                         reg = <0x200 0x38>;
  56                 };
  57
  58                 mpc5200_pic: interrupt-controller@500 {
  59                         /* 5200 interrupts are encoded into two levels; */
  60                         interrupt-controller;
  61                         #interrupt-cells = <3>;
  62                         device_type = "interrupt-controller";
  63                         compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
  64                         reg = <0x500 0x80>;
  65                 };
  66
  67                 timer@600 {     /* General Purpose Timer */
  68                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  69                         cell-index = <0>;
  70                         reg = <0x600 0x10>;
  71                         interrupts = <0x1 0x9 0x0>;
  72                         interrupt-parent = <&mpc5200_pic>;
  73                         fsl,has-wdt;
  74                 };
  75
  76                 timer@610 {     /* General Purpose Timer */
  77                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  78                         cell-index = <1>;
  79                         reg = <0x610 0x10>;
  80                         interrupts = <0x1 0xa 0x0>;
  81                         interrupt-parent = <&mpc5200_pic>;
  82                 };
  83
  84                 gpt2: timer@620 { /* General Purpose Timer in GPIO mode */
  85                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
  86                         cell-index = <2>;
  87                         reg = <0x620 0x10>;
  88                         interrupts = <0x1 0xb 0x0>;
  89                         interrupt-parent = <&mpc5200_pic>;
  90                         gpio-controller;
  91                         #gpio-cells = <2>;
  92                 };
  93
  94                 gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
  95                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
  96                         cell-index = <3>;
  97                         reg = <0x630 0x10>;
  98                         interrupts = <0x1 0xc 0x0>;
  99                         interrupt-parent = <&mpc5200_pic>;
 100                         gpio-controller;
 101                         #gpio-cells = <2>;
 102                 };
 103
 104                 gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
 105                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
 106                         cell-index = <4>;
 107                         reg = <0x640 0x10>;
 108                         interrupts = <0x1 0xd 0x0>;
 109                         interrupt-parent = <&mpc5200_pic>;
 110                         gpio-controller;
 111                         #gpio-cells = <2>;
 112                 };
 113
 114                 gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
 115                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
 116                         cell-index = <5>;
 117                         reg = <0x650 0x10>;
 118                         interrupts = <0x1 0xe 0x0>;
 119                         interrupt-parent = <&mpc5200_pic>;
 120                         gpio-controller;
 121                         #gpio-cells = <2>;
 122                 };
 123
 124                 gpt6: timer@660 { /* General Purpose Timer in GPIO mode */
 125                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
 126                         cell-index = <6>;
 127                         reg = <0x660 0x10>;
 128                         interrupts = <0x1 0xf 0x0>;
 129                         interrupt-parent = <&mpc5200_pic>;
 130                         gpio-controller;
 131                         #gpio-cells = <2>;
 132                 };
 133
 134                 gpt7: timer@670 { /* General Purpose Timer in GPIO mode */
 135                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
 136                         cell-index = <7>;
 137                         reg = <0x670 0x10>;
 138                         interrupts = <0x1 0x10 0x0>;
 139                         interrupt-parent = <&mpc5200_pic>;
 140                         gpio-controller;
 141                         #gpio-cells = <2>;
 142                 };
 143
 144                 rtc@800 {       // Real time clock
 145                         compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
 146                         reg = <0x800 0x100>;
 147                         interrupts = <0x1 0x5 0x0 0x1 0x6 0x0>;
 148                         interrupt-parent = <&mpc5200_pic>;
 149                 };
 150
 151                 can@900 {
 152                         compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
 153                         cell-index = <0>;
 154                         interrupts = <0x2 0x11 0x0>;
 155                         interrupt-parent = <&mpc5200_pic>;
 156                         reg = <0x900 0x80>;
 157                 };
 158
 159                 can@980 {
 160                         compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
 161                         cell-index = <1>;
 162                         interrupts = <0x2 0x12 0x0>;
 163                         interrupt-parent = <&mpc5200_pic>;
 164                         reg = <0x980 0x80>;
 165                 };
 166
 167                 gpio_simple: gpio@b00 {
 168                         compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
 169                         reg = <0xb00 0x40>;
 170                         interrupts = <0x1 0x7 0x0>;
 171                         interrupt-parent = <&mpc5200_pic>;
 172                         gpio-controller;
 173                         #gpio-cells = <2>;
 174                 };
 175
 176                 gpio_wkup: gpio-wkup@c00 {
 177                         compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
 178                         reg = <0xc00 0x40>;
 179                         interrupts = <0x1 0x8 0x0 0x0 0x3 0x0>;
 180                         interrupt-parent = <&mpc5200_pic>;
 181                         gpio-controller;
 182                         #gpio-cells = <2>;
 183                 };
 184
 185                 spi@f00 {
 186                         compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
 187                         reg = <0xf00 0x20>;
 188                         interrupts = <0x2 0xd 0x0 0x2 0xe 0x0>;
 189                         interrupt-parent = <&mpc5200_pic>;
 190                 };
 191
 192                 usb@1000 {
 193                         compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
 194                         reg = <0x1000 0xff>;
 195                         interrupts = <0x2 0x6 0x0>;
 196                         interrupt-parent = <&mpc5200_pic>;
 197                 };
 198
 199                 dma-controller@1200 {
 200                         device_type = "dma-controller";
 201                         compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
 202                         reg = <0x1200 0x80>;
 203                         interrupts = <0x3 0x0 0x0  0x3 0x1 0x0  0x3 0x2 0x0  0x3 0x3 0x0
 204                                       0x3 0x4 0x0  0x3 0x5 0x0  0x3 0x6 0x0  0x3 0x7 0x0
 205                                       0x3 0x8 0x0  0x3 0x9 0x0  0x3 0xa 0x0  0x3 0xb 0x0
 206                                       0x3 0xc 0x0  0x3 0xd 0x0  0x3 0xe 0x0  0x3 0xf 0x0>;
 207                         interrupt-parent = <&mpc5200_pic>;
 208                 };
 209
 210                 xlb@1f00 {
 211                         compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
 212                         reg = <0x1f00 0x100>;
 213                 };
 214
 215                 ac97@2000 { /* PSC1 in ac97 mode */
 216                         device_type = "sound";
 217                         compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
 218                         cell-index = <0>;
 219                         reg = <0x2000 0x100>;
 220                         interrupts = <0x2 0x2 0x0>;
 221                         interrupt-parent = <&mpc5200_pic>;
 222                 };
 223
 224                 /* PSC2 port is used by CAN1/2 */
 225
 226                 serial@2400 { /* PSC3 in UART mode */
 227                         device_type = "serial";
 228                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 229                         port-number = <0>;
 230                         cell-index = <2>;
 231                         reg = <0x2400 0x100>;
 232                         interrupts = <0x2 0x3 0x0>;
 233                         interrupt-parent = <&mpc5200_pic>;
 234                 };
 235
 236                 /* PSC4 is ??? */
 237
 238                 /* PSC5 is ??? */
 239
 240                 serial@2c00 { /* PSC6 in UART mode */
 241                         device_type = "serial";
 242                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 243                         port-number = <1>;
 244                         cell-index = <5>;
 245                         reg = <0x2c00 0x100>;
 246                         interrupts = <0x2 0x4 0x0>;
 247                         interrupt-parent = <&mpc5200_pic>;
 248                 };
 249
 250                 ethernet@3000 {
 251                         device_type = "network";
 252                         compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
 253                         reg = <0x3000 0x400>;
 254                         local-mac-address = [00 00 00 00 00 00];
 255                         interrupts = <0x2 0x5 0x0>;
 256                         interrupt-parent = <&mpc5200_pic>;
 257                         phy-handle = <&phy0>;
 258                 };
 259
 260                 mdio@3000 {
 261                         #address-cells = <1>;
 262                         #size-cells = <0>;
 263                         compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio";
 264                         reg = <0x3000 0x400>;   /* fec range, since we need to setup fec interrupts */
 265                         interrupts = <0x2 0x5 0x0>;     /* these are for "mii command finished", not link changes & co. */
 266                         interrupt-parent = <&mpc5200_pic>;
 267
 268                         phy0:ethernet-phy@0 {
 269                                 device_type = "ethernet-phy";
 270                                 reg = <0x0>;
 271                         };
 272                 };
 273
 274                 ata@3a00 {
 275                         device_type = "ata";
 276                         compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
 277                         reg = <0x3a00 0x100>;
 278                         interrupts = <0x2 0x7 0x0>;
 279                         interrupt-parent = <&mpc5200_pic>;
 280                 };
 281
 282                 i2c@3d00 {
 283                         #address-cells = <1>;
 284                         #size-cells = <0>;
 285                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 286                         cell-index = <0>;
 287                         reg = <0x3d00 0x40>;
 288                         interrupts = <0x2 0xf 0x0>;
 289                         interrupt-parent = <&mpc5200_pic>;
 290                         fsl5200-clocking;
 291                 };
 292
 293                 i2c@3d40 {
 294                         #address-cells = <1>;
 295                         #size-cells = <0>;
 296                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 297                         cell-index = <1>;
 298                         reg = <0x3d40 0x40>;
 299                         interrupts = <0x2 0x10 0x0>;
 300                         interrupt-parent = <&mpc5200_pic>;
 301                         fsl5200-clocking;
 302                         rtc@51 {
 303                                 compatible = "nxp,pcf8563";
 304                                 reg = <0x51>;
 305                         };
 306                         /* FIXME: EEPROM */
 307                 };
 308
 309                 sram@8000 {
 310                         compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram";
 311                         reg = <0x8000 0x4000>;
 312                 };
 313
 314                 /* This is only an example device to show the usage of gpios. It maps all available
 315                  * gpios to the "gpio-provider" device.
 316                  */
 317                 gpio {
 318                         compatible = "gpio-provider";
 319
 320                                                     /* mpc52xx          exp.con         patchfield */
 321                         gpios = <&gpio_wkup     0 0 /* GPIO_WKUP_7      11d             jp13-3     */
 322                                  &gpio_wkup     1 0 /* GPIO_WKUP_6      14c                        */
 323                                  &gpio_wkup     6 0 /* PSC2_4           43c             x5-11      */
 324                                  &gpio_simple   2 0 /* IRDA_1           24c             x7-6    set GPS_PORT_CONFIG[IRDA] = 0 */
 325                                  &gpio_simple   3 0 /* IRDA_0                           x8-5    set GPS_PORT_CONFIG[IRDA] = 0 */
 326                                  &gpt2          0 0 /* timer2           12d             x4-4       */
 327                                  &gpt3          0 0 /* timer3           13d             x6-4       */
 328                                  &gpt4          0 0 /* timer4           61c             x2-16      */
 329                                  &gpt5          0 0 /* timer5           44c             x7-11      */
 330                                  &gpt6          0 0 /* timer6           60c             x8-15      */
 331                                  &gpt7          0 0 /* timer7           36a             x17-9      */
 332                                  >;
 333                 };
 334         };
 335
 336         pci@f0000d00 {
 337                 #interrupt-cells = <1>;
 338                 #size-cells = <2>;
 339                 #address-cells = <3>;
 340                 device_type = "pci";
 341                 compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
 342                 reg = <0xf0000d00 0x100>;
 343                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 344                 interrupt-map = <0xc000 0x0 0x0 0x1 &mpc5200_pic 0x0 0x0 0x3 /* 1st slot */
 345                                  0xc000 0x0 0x0 0x2 &mpc5200_pic 0x1 0x1 0x3
 346                                  0xc000 0x0 0x0 0x3 &mpc5200_pic 0x1 0x2 0x3
 347                                  0xc000 0x0 0x0 0x4 &mpc5200_pic 0x1 0x3 0x3
 348
 349                                  0xc800 0x0 0x0 0x1 &mpc5200_pic 0x1 0x1 0x3 /* 2nd slot */
 350                                  0xc800 0x0 0x0 0x2 &mpc5200_pic 0x1 0x2 0x3
 351                                  0xc800 0x0 0x0 0x3 &mpc5200_pic 0x1 0x3 0x3
 352                                  0xc800 0x0 0x0 0x4 &mpc5200_pic 0x0 0x0 0x3>;
 353                 clock-frequency = <0>; // From boot loader
 354                 interrupts = <0x2 0x8 0x0 0x2 0x9 0x0 0x2 0xa 0x0>;
 355                 interrupt-parent = <&mpc5200_pic>;
 356                 bus-range = <0 0>;
 357                 ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
 358                           0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
 359                           0x01000000 0x0 0x00000000 0xb0000000 0x0 0x01000000>;
 360         };
 361 };