1 /******************************************************************************
3 * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28 #include <linux/skbuff.h>
29 #include <linux/wireless.h>
30 #include <net/mac80211.h>
32 #include <linux/netdevice.h>
33 #include <linux/etherdevice.h>
34 #include <linux/delay.h>
36 #include <linux/workqueue.h>
42 #define RS_NAME "iwl-agn-rs"
44 #define NUM_TRY_BEFORE_ANT_TOGGLE 1
45 #define IWL_NUMBER_TRY 1
46 #define IWL_HT_NUMBER_TRY 3
48 #define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */
49 #define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */
50 #define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */
52 /* max allowed rate miss before sync LQ cmd */
53 #define IWL_MISSED_RATE_MAX 15
54 /* max time to accum history 2 seconds */
55 #define IWL_RATE_SCALE_FLUSH_INTVL (2*HZ)
57 static u8 rs_ht_to_legacy[] = {
58 IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
59 IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
61 IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX,
62 IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX,
63 IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX,
64 IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX
67 static const u8 ant_toggle_lookup[] = {
68 /*ANT_NONE -> */ ANT_NONE,
71 /*ANT_AB -> */ ANT_BC,
73 /*ANT_AC -> */ ANT_AB,
74 /*ANT_BC -> */ ANT_AC,
75 /*ANT_ABC -> */ ANT_ABC,
79 * struct iwl_rate_scale_data -- tx success history for one rate
81 struct iwl_rate_scale_data {
82 u64 data; /* bitmap of successful frames */
83 s32 success_counter; /* number of frames successful */
84 s32 success_ratio; /* per-cent * 128 */
85 s32 counter; /* number of frames attempted */
86 s32 average_tpt; /* success ratio * expected throughput */
91 * struct iwl_scale_tbl_info -- tx params and success history for all rates
93 * There are two of these in struct iwl_lq_sta,
94 * one for "active", and one for "search".
96 struct iwl_scale_tbl_info {
97 enum iwl_table_type lq_type;
99 u8 is_SGI; /* 1 = short guard interval */
100 u8 is_fat; /* 1 = 40 MHz channel width */
101 u8 is_dup; /* 1 = duplicated data streams */
102 u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
103 s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */
104 u32 current_rate; /* rate_n_flags, uCode API format */
105 struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
108 struct iwl_traffic_load {
109 unsigned long time_stamp; /* age of the oldest statistics */
110 u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time
112 u32 total; /* total num of packets during the
113 * last TID_MAX_TIME_DIFF */
114 u8 queue_count; /* number of queues that has
115 * been used since the last cleanup */
116 u8 head; /* start of the circular buffer */
120 * struct iwl_lq_sta -- driver's rate scaling private structure
122 * Pointer to this gets passed back and forth between driver and mac80211.
125 u8 active_tbl; /* index of active table, range 0-1 */
126 u8 enable_counter; /* indicates HT mode */
127 u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */
128 u8 search_better_tbl; /* 1: currently trying alternate mode */
131 /* The following determine when to search for a new mode */
132 u32 table_count_limit;
133 u32 max_failure_limit; /* # failed frames before new search */
134 u32 max_success_limit; /* # successful frames before new search */
136 u32 total_failed; /* total failed frames, any/all rates */
137 u32 total_success; /* total successful frames, any/all rates */
138 u32 flush_timer; /* time staying in mode before new search */
140 u8 action_counter; /* # mode-switch actions tried */
143 enum ieee80211_band band;
146 /* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
148 u16 active_legacy_rate;
149 u16 active_siso_rate;
150 u16 active_mimo2_rate;
151 u16 active_mimo3_rate;
152 u16 active_rate_basic;
153 s8 max_rate_idx; /* Max rate set by user */
154 u8 missed_rate_counter;
156 struct iwl_link_quality_cmd lq;
157 struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
158 struct iwl_traffic_load load[TID_MAX_LOAD_COUNT];
160 #ifdef CONFIG_MAC80211_DEBUGFS
161 struct dentry *rs_sta_dbgfs_scale_table_file;
162 struct dentry *rs_sta_dbgfs_stats_table_file;
163 struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
166 struct iwl_priv *drv;
168 /* used to be in sta_info */
172 static void rs_rate_scale_perform(struct iwl_priv *priv,
173 struct ieee80211_hdr *hdr,
174 struct ieee80211_sta *sta,
175 struct iwl_lq_sta *lq_sta);
176 static void rs_fill_link_cmd(const struct iwl_priv *priv,
177 struct iwl_lq_sta *lq_sta, u32 rate_n_flags);
180 #ifdef CONFIG_MAC80211_DEBUGFS
181 static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
182 u32 *rate_n_flags, int index);
184 static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
185 u32 *rate_n_flags, int index)
190 * Expected throughput metrics for following rates:
191 * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
192 * "G" is the only table that supports CCK (the first 4 rates).
194 /*FIXME:RS:need to separate tables for MIMO2/MIMO3*/
195 static s32 expected_tpt_A[IWL_RATE_COUNT] = {
196 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186
199 static s32 expected_tpt_G[IWL_RATE_COUNT] = {
200 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 186
203 static s32 expected_tpt_siso20MHz[IWL_RATE_COUNT] = {
204 0, 0, 0, 0, 42, 42, 76, 102, 124, 159, 183, 193, 202
207 static s32 expected_tpt_siso20MHzSGI[IWL_RATE_COUNT] = {
208 0, 0, 0, 0, 46, 46, 82, 110, 132, 168, 192, 202, 211
211 static s32 expected_tpt_mimo20MHz[IWL_RATE_COUNT] = {
212 0, 0, 0, 0, 74, 74, 123, 155, 179, 214, 236, 244, 251
215 static s32 expected_tpt_mimo20MHzSGI[IWL_RATE_COUNT] = {
216 0, 0, 0, 0, 81, 81, 131, 164, 188, 222, 243, 251, 257
219 static s32 expected_tpt_siso40MHz[IWL_RATE_COUNT] = {
220 0, 0, 0, 0, 77, 77, 127, 160, 184, 220, 242, 250, 257
223 static s32 expected_tpt_siso40MHzSGI[IWL_RATE_COUNT] = {
224 0, 0, 0, 0, 83, 83, 135, 169, 193, 229, 250, 257, 264
227 static s32 expected_tpt_mimo40MHz[IWL_RATE_COUNT] = {
228 0, 0, 0, 0, 123, 123, 182, 214, 235, 264, 279, 285, 289
231 static s32 expected_tpt_mimo40MHzSGI[IWL_RATE_COUNT] = {
232 0, 0, 0, 0, 131, 131, 191, 222, 242, 270, 284, 289, 293
235 static inline u8 rs_extract_rate(u32 rate_n_flags)
237 return (u8)(rate_n_flags & 0xFF);
240 static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window)
243 window->success_counter = 0;
244 window->success_ratio = IWL_INVALID_VALUE;
246 window->average_tpt = IWL_INVALID_VALUE;
250 static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type)
252 return (ant_type & valid_antenna) == ant_type;
256 * removes the old data from the statistics. All data that is older than
257 * TID_MAX_TIME_DIFF, will be deleted.
259 static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time)
261 /* The oldest age we want to keep */
262 u32 oldest_time = curr_time - TID_MAX_TIME_DIFF;
264 while (tl->queue_count &&
265 (tl->time_stamp < oldest_time)) {
266 tl->total -= tl->packet_count[tl->head];
267 tl->packet_count[tl->head] = 0;
268 tl->time_stamp += TID_QUEUE_CELL_SPACING;
271 if (tl->head >= TID_QUEUE_MAX_SIZE)
277 * increment traffic load value for tid and also remove
278 * any old values if passed the certain time period
280 static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data,
281 struct ieee80211_hdr *hdr)
283 u32 curr_time = jiffies_to_msecs(jiffies);
286 struct iwl_traffic_load *tl = NULL;
289 if (ieee80211_is_data_qos(hdr->frame_control)) {
290 u8 *qc = ieee80211_get_qos_ctl(hdr);
293 return MAX_TID_COUNT;
295 tl = &lq_data->load[tid];
297 curr_time -= curr_time % TID_ROUND_VALUE;
299 /* Happens only for the first packet. Initialize the data */
300 if (!(tl->queue_count)) {
302 tl->time_stamp = curr_time;
305 tl->packet_count[0] = 1;
306 return MAX_TID_COUNT;
309 time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
310 index = time_diff / TID_QUEUE_CELL_SPACING;
312 /* The history is too long: remove data that is older than */
313 /* TID_MAX_TIME_DIFF */
314 if (index >= TID_QUEUE_MAX_SIZE)
315 rs_tl_rm_old_stats(tl, curr_time);
317 index = (tl->head + index) % TID_QUEUE_MAX_SIZE;
318 tl->packet_count[index] = tl->packet_count[index] + 1;
319 tl->total = tl->total + 1;
321 if ((index + 1) > tl->queue_count)
322 tl->queue_count = index + 1;
328 get the traffic load value for tid
330 static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid)
332 u32 curr_time = jiffies_to_msecs(jiffies);
335 struct iwl_traffic_load *tl = NULL;
337 if (tid >= TID_MAX_LOAD_COUNT)
340 tl = &(lq_data->load[tid]);
342 curr_time -= curr_time % TID_ROUND_VALUE;
344 if (!(tl->queue_count))
347 time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
348 index = time_diff / TID_QUEUE_CELL_SPACING;
350 /* The history is too long: remove data that is older than */
351 /* TID_MAX_TIME_DIFF */
352 if (index >= TID_QUEUE_MAX_SIZE)
353 rs_tl_rm_old_stats(tl, curr_time);
358 static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv,
359 struct iwl_lq_sta *lq_data, u8 tid,
360 struct ieee80211_sta *sta)
362 if (rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) {
363 IWL_DEBUG_HT("Starting Tx agg: STA: %pM tid: %d\n",
365 ieee80211_start_tx_ba_session(priv->hw, sta->addr, tid);
369 static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid,
370 struct iwl_lq_sta *lq_data,
371 struct ieee80211_sta *sta)
373 if ((tid < TID_MAX_LOAD_COUNT))
374 rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
375 else if (tid == IWL_AGG_ALL_TID)
376 for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++)
377 rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
380 static inline int get_num_of_ant_from_rate(u32 rate_n_flags)
382 return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) +
383 !!(rate_n_flags & RATE_MCS_ANT_B_MSK) +
384 !!(rate_n_flags & RATE_MCS_ANT_C_MSK);
388 * rs_collect_tx_data - Update the success/failure sliding window
390 * We keep a sliding window of the last 62 packets transmitted
391 * at this rate. window->data contains the bitmask of successful
394 static int rs_collect_tx_data(struct iwl_rate_scale_data *windows,
395 int scale_index, s32 tpt, int retries,
398 struct iwl_rate_scale_data *window = NULL;
399 static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1));
402 if (scale_index < 0 || scale_index >= IWL_RATE_COUNT)
405 /* Select data for current tx bit rate */
406 window = &(windows[scale_index]);
409 * Keep track of only the latest 62 tx frame attempts in this rate's
410 * history window; anything older isn't really relevant any more.
411 * If we have filled up the sliding window, drop the oldest attempt;
412 * if the oldest attempt (highest bit in bitmap) shows "success",
413 * subtract "1" from the success counter (this is the main reason
414 * we keep these bitmaps!).
416 while (retries > 0) {
417 if (window->counter >= IWL_RATE_MAX_WINDOW) {
419 /* remove earliest */
420 window->counter = IWL_RATE_MAX_WINDOW - 1;
422 if (window->data & mask) {
423 window->data &= ~mask;
424 window->success_counter--;
428 /* Increment frames-attempted counter */
431 /* Shift bitmap by one frame (throw away oldest history),
432 * OR in "1", and increment "success" if this
433 * frame was successful. */
436 window->success_counter++;
444 /* Calculate current success ratio, avoid divide-by-0! */
445 if (window->counter > 0)
446 window->success_ratio = 128 * (100 * window->success_counter)
449 window->success_ratio = IWL_INVALID_VALUE;
451 fail_count = window->counter - window->success_counter;
453 /* Calculate average throughput, if we have enough history. */
454 if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) ||
455 (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH))
456 window->average_tpt = (window->success_ratio * tpt + 64) / 128;
458 window->average_tpt = IWL_INVALID_VALUE;
460 /* Tag this window as having been updated */
461 window->stamp = jiffies;
467 * Fill uCode API rate_n_flags field, based on "search" or "active" table.
469 /* FIXME:RS:remove this function and put the flags statically in the table */
470 static u32 rate_n_flags_from_tbl(struct iwl_priv *priv,
471 struct iwl_scale_tbl_info *tbl,
472 int index, u8 use_green)
474 u32 rate_n_flags = 0;
476 if (is_legacy(tbl->lq_type)) {
477 rate_n_flags = iwl_rates[index].plcp;
478 if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE)
479 rate_n_flags |= RATE_MCS_CCK_MSK;
481 } else if (is_Ht(tbl->lq_type)) {
482 if (index > IWL_LAST_OFDM_RATE) {
483 IWL_ERR(priv, "Invalid HT rate index %d\n", index);
484 index = IWL_LAST_OFDM_RATE;
486 rate_n_flags = RATE_MCS_HT_MSK;
488 if (is_siso(tbl->lq_type))
489 rate_n_flags |= iwl_rates[index].plcp_siso;
490 else if (is_mimo2(tbl->lq_type))
491 rate_n_flags |= iwl_rates[index].plcp_mimo2;
493 rate_n_flags |= iwl_rates[index].plcp_mimo3;
495 IWL_ERR(priv, "Invalid tbl->lq_type %d\n", tbl->lq_type);
498 rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) &
499 RATE_MCS_ANT_ABC_MSK);
501 if (is_Ht(tbl->lq_type)) {
504 rate_n_flags |= RATE_MCS_DUP_MSK;
506 rate_n_flags |= RATE_MCS_FAT_MSK;
509 rate_n_flags |= RATE_MCS_SGI_MSK;
512 rate_n_flags |= RATE_MCS_GF_MSK;
513 if (is_siso(tbl->lq_type) && tbl->is_SGI) {
514 rate_n_flags &= ~RATE_MCS_SGI_MSK;
515 IWL_ERR(priv, "GF was set with SGI:SISO\n");
523 * Interpret uCode API's rate_n_flags format,
524 * fill "search" or "active" tx mode table.
526 static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
527 enum ieee80211_band band,
528 struct iwl_scale_tbl_info *tbl,
531 u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK);
532 u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags);
535 *rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags);
537 if (*rate_idx == IWL_RATE_INVALID) {
541 tbl->is_SGI = 0; /* default legacy setup */
544 tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS);
545 tbl->lq_type = LQ_NONE;
547 /* legacy rate format */
548 if (!(rate_n_flags & RATE_MCS_HT_MSK)) {
549 if (num_of_ant == 1) {
550 if (band == IEEE80211_BAND_5GHZ)
557 if (rate_n_flags & RATE_MCS_SGI_MSK)
560 if ((rate_n_flags & RATE_MCS_FAT_MSK) ||
561 (rate_n_flags & RATE_MCS_DUP_MSK))
564 if (rate_n_flags & RATE_MCS_DUP_MSK)
567 mcs = rs_extract_rate(rate_n_flags);
570 if (mcs <= IWL_RATE_SISO_60M_PLCP) {
572 tbl->lq_type = LQ_SISO; /*else NONE*/
574 } else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) {
576 tbl->lq_type = LQ_MIMO2;
580 tbl->lq_type = LQ_MIMO3;
586 /* switch to another antenna/antennas and return 1 */
587 /* if no other valid antenna found, return 0 */
588 static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
589 struct iwl_scale_tbl_info *tbl)
593 if (!tbl->ant_type || tbl->ant_type > ANT_ABC)
596 if (!rs_is_valid_ant(valid_ant, tbl->ant_type))
599 new_ant_type = ant_toggle_lookup[tbl->ant_type];
601 while ((new_ant_type != tbl->ant_type) &&
602 !rs_is_valid_ant(valid_ant, new_ant_type))
603 new_ant_type = ant_toggle_lookup[new_ant_type];
605 if (new_ant_type == tbl->ant_type)
608 tbl->ant_type = new_ant_type;
609 *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK;
610 *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS;
614 /* FIXME:RS: in 4965 we don't use greenfield at all */
615 /* FIXME:RS: don't use greenfield for now in TX */
617 static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf)
619 return (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) &&
620 priv->current_ht_config.is_green_field &&
621 !priv->current_ht_config.non_GF_STA_present;
624 static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf)
630 * rs_get_supported_rates - get the available rates
632 * if management frame or broadcast frame only return
633 * basic available rates.
636 static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta,
637 struct ieee80211_hdr *hdr,
638 enum iwl_table_type rate_type)
640 if (hdr && is_multicast_ether_addr(hdr->addr1) &&
641 lq_sta->active_rate_basic)
642 return lq_sta->active_rate_basic;
644 if (is_legacy(rate_type)) {
645 return lq_sta->active_legacy_rate;
647 if (is_siso(rate_type))
648 return lq_sta->active_siso_rate;
649 else if (is_mimo2(rate_type))
650 return lq_sta->active_mimo2_rate;
652 return lq_sta->active_mimo3_rate;
656 static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask,
659 u8 high = IWL_RATE_INVALID;
660 u8 low = IWL_RATE_INVALID;
662 /* 802.11A or ht walks to the next literal adjacent rate in
664 if (is_a_band(rate_type) || !is_legacy(rate_type)) {
668 /* Find the previous rate that is in the rate mask */
670 for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
671 if (rate_mask & mask) {
677 /* Find the next rate that is in the rate mask */
679 for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) {
680 if (rate_mask & mask) {
686 return (high << 8) | low;
690 while (low != IWL_RATE_INVALID) {
691 low = iwl_rates[low].prev_rs;
692 if (low == IWL_RATE_INVALID)
694 if (rate_mask & (1 << low))
696 IWL_DEBUG_RATE("Skipping masked lower rate: %d\n", low);
700 while (high != IWL_RATE_INVALID) {
701 high = iwl_rates[high].next_rs;
702 if (high == IWL_RATE_INVALID)
704 if (rate_mask & (1 << high))
706 IWL_DEBUG_RATE("Skipping masked higher rate: %d\n", high);
709 return (high << 8) | low;
712 static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
713 struct iwl_scale_tbl_info *tbl,
714 u8 scale_index, u8 ht_possible)
719 u8 switch_to_legacy = 0;
720 u8 is_green = lq_sta->is_green;
722 /* check if we need to switch from HT to legacy rates.
723 * assumption is that mandatory rates (1Mbps or 6Mbps)
724 * are always supported (spec demand) */
725 if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) {
726 switch_to_legacy = 1;
727 scale_index = rs_ht_to_legacy[scale_index];
728 if (lq_sta->band == IEEE80211_BAND_5GHZ)
733 if (num_of_ant(tbl->ant_type) > 1)
734 tbl->ant_type = ANT_A;/*FIXME:RS*/
740 rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type);
742 /* Mask with station rate restriction */
743 if (is_legacy(tbl->lq_type)) {
744 /* supp_rates has no CCK bits in A mode */
745 if (lq_sta->band == IEEE80211_BAND_5GHZ)
746 rate_mask = (u16)(rate_mask &
747 (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
749 rate_mask = (u16)(rate_mask & lq_sta->supp_rates);
752 /* If we switched from HT to legacy, check current rate */
753 if (switch_to_legacy && (rate_mask & (1 << scale_index))) {
758 high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask,
760 low = high_low & 0xff;
762 if (low == IWL_RATE_INVALID)
766 return rate_n_flags_from_tbl(lq_sta->drv, tbl, low, is_green);
770 * mac80211 sends us Tx status
772 static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
773 struct ieee80211_sta *sta, void *priv_sta,
778 int rs_index, index = 0;
779 struct iwl_lq_sta *lq_sta = priv_sta;
780 struct iwl_link_quality_cmd *table;
781 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
782 struct iwl_priv *priv = (struct iwl_priv *)priv_r;
783 struct ieee80211_hw *hw = priv->hw;
784 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
785 struct iwl_rate_scale_data *window = NULL;
786 struct iwl_rate_scale_data *search_win = NULL;
788 struct iwl_scale_tbl_info tbl_type;
789 struct iwl_scale_tbl_info *curr_tbl, *search_tbl;
793 IWL_DEBUG_RATE_LIMIT("get frame ack response, update rate scale window\n");
795 if (!ieee80211_is_data(hdr->frame_control) ||
796 is_multicast_ether_addr(hdr->addr1))
799 /* This packet was aggregated but doesn't carry rate scale info */
800 if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
801 !(info->flags & IEEE80211_TX_STAT_AMPDU))
804 retries = info->status.rates[0].count - 1;
809 if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) &&
810 !lq_sta->ibss_sta_added)
814 active_index = lq_sta->active_tbl;
816 curr_tbl = &(lq_sta->lq_info[active_index]);
817 search_tbl = &(lq_sta->lq_info[(1 - active_index)]);
818 window = (struct iwl_rate_scale_data *)&(curr_tbl->win[0]);
819 search_win = (struct iwl_rate_scale_data *)&(search_tbl->win[0]);
822 * Ignore this Tx frame response if its initial rate doesn't match
823 * that of latest Link Quality command. There may be stragglers
824 * from a previous Link Quality command, but we're no longer interested
825 * in those; they're either from the "active" mode while we're trying
826 * to check "search" mode, or a prior "search" mode after we've moved
827 * to a new "search" mode (which might become the new "active" mode).
829 tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
830 rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
831 if (priv->band == IEEE80211_BAND_5GHZ)
832 rs_index -= IWL_FIRST_OFDM_RATE;
834 if ((info->status.rates[0].idx < 0) ||
835 (tbl_type.is_SGI != !!(info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI)) ||
836 (tbl_type.is_fat != !!(info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) ||
837 (tbl_type.is_dup != !!(info->status.rates[0].flags & IEEE80211_TX_RC_DUP_DATA)) ||
838 (tbl_type.ant_type != info->antenna_sel_tx) ||
839 (!!(tx_rate & RATE_MCS_HT_MSK) != !!(info->status.rates[0].flags & IEEE80211_TX_RC_MCS)) ||
840 (!!(tx_rate & RATE_MCS_GF_MSK) != !!(info->status.rates[0].flags & IEEE80211_TX_RC_GREEN_FIELD)) ||
841 (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate !=
842 hw->wiphy->bands[info->band]->bitrates[info->status.rates[0].idx].bitrate)) {
843 IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate);
844 /* the last LQ command could failed so the LQ in ucode not
845 * the same in driver sync up
847 lq_sta->missed_rate_counter++;
848 if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) {
849 lq_sta->missed_rate_counter = 0;
850 iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
855 lq_sta->missed_rate_counter = 0;
856 /* Update frame history window with "failure" for each Tx retry. */
858 /* Look up the rate and other info used for each tx attempt.
859 * Each tx attempt steps one entry deeper in the rate table. */
860 tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags);
861 rs_get_tbl_info_from_mcs(tx_rate, priv->band,
862 &tbl_type, &rs_index);
864 /* If type matches "search" table,
865 * add failure to "search" history */
866 if ((tbl_type.lq_type == search_tbl->lq_type) &&
867 (tbl_type.ant_type == search_tbl->ant_type) &&
868 (tbl_type.is_SGI == search_tbl->is_SGI)) {
869 if (search_tbl->expected_tpt)
870 tpt = search_tbl->expected_tpt[rs_index];
873 rs_collect_tx_data(search_win, rs_index, tpt, 1, 0);
875 /* Else if type matches "current/active" table,
876 * add failure to "current/active" history */
877 } else if ((tbl_type.lq_type == curr_tbl->lq_type) &&
878 (tbl_type.ant_type == curr_tbl->ant_type) &&
879 (tbl_type.is_SGI == curr_tbl->is_SGI)) {
880 if (curr_tbl->expected_tpt)
881 tpt = curr_tbl->expected_tpt[rs_index];
884 rs_collect_tx_data(window, rs_index, tpt, 1, 0);
887 /* If not searching for a new mode, increment failed counter
888 * ... this helps determine when to start searching again */
889 if (lq_sta->stay_in_tbl)
890 lq_sta->total_failed++;
897 * Find (by rate) the history window to update with final Tx attempt;
898 * if Tx was successful first try, use original rate,
899 * else look up the rate that was, finally, successful.
901 tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags);
902 rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
904 /* Update frame history window with "success" if Tx got ACKed ... */
905 status = !!(info->flags & IEEE80211_TX_STAT_ACK);
907 /* If type matches "search" table,
908 * add final tx status to "search" history */
909 if ((tbl_type.lq_type == search_tbl->lq_type) &&
910 (tbl_type.ant_type == search_tbl->ant_type) &&
911 (tbl_type.is_SGI == search_tbl->is_SGI)) {
912 if (search_tbl->expected_tpt)
913 tpt = search_tbl->expected_tpt[rs_index];
916 if (info->flags & IEEE80211_TX_CTL_AMPDU)
917 rs_collect_tx_data(search_win, rs_index, tpt,
918 info->status.ampdu_ack_len,
919 info->status.ampdu_ack_map);
921 rs_collect_tx_data(search_win, rs_index, tpt,
923 /* Else if type matches "current/active" table,
924 * add final tx status to "current/active" history */
925 } else if ((tbl_type.lq_type == curr_tbl->lq_type) &&
926 (tbl_type.ant_type == curr_tbl->ant_type) &&
927 (tbl_type.is_SGI == curr_tbl->is_SGI)) {
928 if (curr_tbl->expected_tpt)
929 tpt = curr_tbl->expected_tpt[rs_index];
932 if (info->flags & IEEE80211_TX_CTL_AMPDU)
933 rs_collect_tx_data(window, rs_index, tpt,
934 info->status.ampdu_ack_len,
935 info->status.ampdu_ack_map);
937 rs_collect_tx_data(window, rs_index, tpt,
941 /* If not searching for new mode, increment success/failed counter
942 * ... these help determine when to start searching again */
943 if (lq_sta->stay_in_tbl) {
944 if (info->flags & IEEE80211_TX_CTL_AMPDU) {
945 lq_sta->total_success += info->status.ampdu_ack_map;
946 lq_sta->total_failed +=
947 (info->status.ampdu_ack_len - info->status.ampdu_ack_map);
950 lq_sta->total_success++;
952 lq_sta->total_failed++;
956 /* See if there's a better rate or modulation mode to try. */
957 if (sta && sta->supp_rates[sband->band])
958 rs_rate_scale_perform(priv, hdr, sta, lq_sta);
964 * Begin a period of staying with a selected modulation mode.
965 * Set "stay_in_tbl" flag to prevent any mode switches.
966 * Set frame tx success limits according to legacy vs. high-throughput,
967 * and reset overall (spanning all rates) tx success history statistics.
968 * These control how long we stay using same modulation mode before
969 * searching for a new mode.
971 static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy,
972 struct iwl_lq_sta *lq_sta)
974 IWL_DEBUG_RATE("we are staying in the same table\n");
975 lq_sta->stay_in_tbl = 1; /* only place this gets set */
977 lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT;
978 lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT;
979 lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT;
981 lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT;
982 lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT;
983 lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT;
985 lq_sta->table_count = 0;
986 lq_sta->total_failed = 0;
987 lq_sta->total_success = 0;
991 * Find correct throughput table for given mode of modulation
993 static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta,
994 struct iwl_scale_tbl_info *tbl)
996 if (is_legacy(tbl->lq_type)) {
997 if (!is_a_band(tbl->lq_type))
998 tbl->expected_tpt = expected_tpt_G;
1000 tbl->expected_tpt = expected_tpt_A;
1001 } else if (is_siso(tbl->lq_type)) {
1002 if (tbl->is_fat && !lq_sta->is_dup)
1004 tbl->expected_tpt = expected_tpt_siso40MHzSGI;
1006 tbl->expected_tpt = expected_tpt_siso40MHz;
1007 else if (tbl->is_SGI)
1008 tbl->expected_tpt = expected_tpt_siso20MHzSGI;
1010 tbl->expected_tpt = expected_tpt_siso20MHz;
1012 } else if (is_mimo(tbl->lq_type)) { /* FIXME:need to separate mimo2/3 */
1013 if (tbl->is_fat && !lq_sta->is_dup)
1015 tbl->expected_tpt = expected_tpt_mimo40MHzSGI;
1017 tbl->expected_tpt = expected_tpt_mimo40MHz;
1018 else if (tbl->is_SGI)
1019 tbl->expected_tpt = expected_tpt_mimo20MHzSGI;
1021 tbl->expected_tpt = expected_tpt_mimo20MHz;
1023 tbl->expected_tpt = expected_tpt_G;
1027 * Find starting rate for new "search" high-throughput mode of modulation.
1028 * Goal is to find lowest expected rate (under perfect conditions) that is
1029 * above the current measured throughput of "active" mode, to give new mode
1030 * a fair chance to prove itself without too many challenges.
1032 * This gets called when transitioning to more aggressive modulation
1033 * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive
1034 * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need
1035 * to decrease to match "active" throughput. When moving from MIMO to SISO,
1036 * bit rate will typically need to increase, but not if performance was bad.
1038 static s32 rs_get_best_rate(struct iwl_priv *priv,
1039 struct iwl_lq_sta *lq_sta,
1040 struct iwl_scale_tbl_info *tbl, /* "search" */
1041 u16 rate_mask, s8 index)
1043 /* "active" values */
1044 struct iwl_scale_tbl_info *active_tbl =
1045 &(lq_sta->lq_info[lq_sta->active_tbl]);
1046 s32 active_sr = active_tbl->win[index].success_ratio;
1047 s32 active_tpt = active_tbl->expected_tpt[index];
1049 /* expected "search" throughput */
1050 s32 *tpt_tbl = tbl->expected_tpt;
1052 s32 new_rate, high, low, start_hi;
1056 new_rate = high = low = start_hi = IWL_RATE_INVALID;
1059 high_low = rs_get_adjacent_rate(priv, rate, rate_mask,
1062 low = high_low & 0xff;
1063 high = (high_low >> 8) & 0xff;
1066 * Lower the "search" bit rate, to give new "search" mode
1067 * approximately the same throughput as "active" if:
1069 * 1) "Active" mode has been working modestly well (but not
1070 * great), and expected "search" throughput (under perfect
1071 * conditions) at candidate rate is above the actual
1072 * measured "active" throughput (but less than expected
1073 * "active" throughput under perfect conditions).
1075 * 2) "Active" mode has been working perfectly or very well
1076 * and expected "search" throughput (under perfect
1077 * conditions) at candidate rate is above expected
1078 * "active" throughput (under perfect conditions).
1080 if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) &&
1081 ((active_sr > IWL_RATE_DECREASE_TH) &&
1082 (active_sr <= IWL_RATE_HIGH_TH) &&
1083 (tpt_tbl[rate] <= active_tpt))) ||
1084 ((active_sr >= IWL_RATE_SCALE_SWITCH) &&
1085 (tpt_tbl[rate] > active_tpt))) {
1087 /* (2nd or later pass)
1088 * If we've already tried to raise the rate, and are
1089 * now trying to lower it, use the higher rate. */
1090 if (start_hi != IWL_RATE_INVALID) {
1091 new_rate = start_hi;
1097 /* Loop again with lower rate */
1098 if (low != IWL_RATE_INVALID)
1101 /* Lower rate not available, use the original */
1105 /* Else try to raise the "search" rate to match "active" */
1107 /* (2nd or later pass)
1108 * If we've already tried to lower the rate, and are
1109 * now trying to raise it, use the lower rate. */
1110 if (new_rate != IWL_RATE_INVALID)
1113 /* Loop again with higher rate */
1114 else if (high != IWL_RATE_INVALID) {
1118 /* Higher rate not available, use the original */
1130 * Set up search table for MIMO
1132 static int rs_switch_to_mimo2(struct iwl_priv *priv,
1133 struct iwl_lq_sta *lq_sta,
1134 struct ieee80211_conf *conf,
1135 struct ieee80211_sta *sta,
1136 struct iwl_scale_tbl_info *tbl, int index)
1140 s8 is_green = lq_sta->is_green;
1142 if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
1145 if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
1146 == WLAN_HT_CAP_SM_PS_STATIC)
1149 /* Need both Tx chains/antennas to support MIMO */
1150 if (priv->hw_params.tx_chains_num < 2)
1153 IWL_DEBUG_RATE("LQ: try to switch to MIMO2\n");
1155 tbl->lq_type = LQ_MIMO2;
1156 tbl->is_dup = lq_sta->is_dup;
1158 rate_mask = lq_sta->active_mimo2_rate;
1160 if (priv->current_ht_config.supported_chan_width
1161 == IWL_CHANNEL_WIDTH_40MHZ)
1166 /* FIXME: - don't toggle SGI here
1168 if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY)
1172 } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY)
1178 rs_set_expected_tpt_table(lq_sta, tbl);
1180 rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
1182 IWL_DEBUG_RATE("LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask);
1184 if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
1185 IWL_DEBUG_RATE("Can't switch with index %d rate mask %x\n",
1189 tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
1191 IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n",
1192 tbl->current_rate, is_green);
1197 * Set up search table for SISO
1199 static int rs_switch_to_siso(struct iwl_priv *priv,
1200 struct iwl_lq_sta *lq_sta,
1201 struct ieee80211_conf *conf,
1202 struct ieee80211_sta *sta,
1203 struct iwl_scale_tbl_info *tbl, int index)
1206 u8 is_green = lq_sta->is_green;
1209 if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
1212 IWL_DEBUG_RATE("LQ: try to switch to SISO\n");
1214 tbl->is_dup = lq_sta->is_dup;
1215 tbl->lq_type = LQ_SISO;
1217 rate_mask = lq_sta->active_siso_rate;
1219 if (priv->current_ht_config.supported_chan_width
1220 == IWL_CHANNEL_WIDTH_40MHZ)
1225 /* FIXME: - don't toggle SGI here
1227 if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY)
1231 } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY)
1238 tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/
1240 rs_set_expected_tpt_table(lq_sta, tbl);
1241 rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
1243 IWL_DEBUG_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask);
1244 if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
1245 IWL_DEBUG_RATE("can not switch with index %d rate mask %x\n",
1249 tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
1250 IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n",
1251 tbl->current_rate, is_green);
1256 * Try to switch to new modulation mode from legacy
1258 static int rs_move_legacy_other(struct iwl_priv *priv,
1259 struct iwl_lq_sta *lq_sta,
1260 struct ieee80211_conf *conf,
1261 struct ieee80211_sta *sta,
1264 struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1265 struct iwl_scale_tbl_info *search_tbl =
1266 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1267 struct iwl_rate_scale_data *window = &(tbl->win[index]);
1268 u32 sz = (sizeof(struct iwl_scale_tbl_info) -
1269 (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
1270 u8 start_action = tbl->action;
1271 u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
1272 u8 tx_chains_num = priv->hw_params.tx_chains_num;
1276 switch (tbl->action) {
1277 case IWL_LEGACY_SWITCH_ANTENNA1:
1278 case IWL_LEGACY_SWITCH_ANTENNA2:
1279 IWL_DEBUG_RATE("LQ: Legacy toggle Antenna\n");
1281 lq_sta->action_counter++;
1283 if ((tbl->action == IWL_LEGACY_SWITCH_ANTENNA1 &&
1284 tx_chains_num <= 1) ||
1285 (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2 &&
1286 tx_chains_num <= 2))
1289 /* Don't change antenna if success has been great */
1290 if (window->success_ratio >= IWL_RS_GOOD_RATIO)
1293 /* Set up search table to try other antenna */
1294 memcpy(search_tbl, tbl, sz);
1296 if (rs_toggle_antenna(valid_tx_ant,
1297 &search_tbl->current_rate, search_tbl)) {
1298 rs_set_expected_tpt_table(lq_sta, search_tbl);
1302 case IWL_LEGACY_SWITCH_SISO:
1303 IWL_DEBUG_RATE("LQ: Legacy switch to SISO\n");
1305 /* Set up search table to try SISO */
1306 memcpy(search_tbl, tbl, sz);
1307 search_tbl->is_SGI = 0;
1308 ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
1311 lq_sta->action_counter = 0;
1316 case IWL_LEGACY_SWITCH_MIMO2_AB:
1317 case IWL_LEGACY_SWITCH_MIMO2_AC:
1318 case IWL_LEGACY_SWITCH_MIMO2_BC:
1319 IWL_DEBUG_RATE("LQ: Legacy switch to MIMO2\n");
1321 /* Set up search table to try MIMO */
1322 memcpy(search_tbl, tbl, sz);
1323 search_tbl->is_SGI = 0;
1325 if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AB)
1326 search_tbl->ant_type = ANT_AB;
1327 else if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AC)
1328 search_tbl->ant_type = ANT_AC;
1330 search_tbl->ant_type = ANT_BC;
1332 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
1335 ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
1338 lq_sta->action_counter = 0;
1344 if (tbl->action > IWL_LEGACY_SWITCH_MIMO2_BC)
1345 tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
1347 if (tbl->action == start_action)
1351 search_tbl->lq_type = LQ_NONE;
1355 lq_sta->search_better_tbl = 1;
1357 if (tbl->action > IWL_LEGACY_SWITCH_MIMO2_BC)
1358 tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
1364 * Try to switch to new modulation mode from SISO
1366 static int rs_move_siso_to_other(struct iwl_priv *priv,
1367 struct iwl_lq_sta *lq_sta,
1368 struct ieee80211_conf *conf,
1369 struct ieee80211_sta *sta, int index)
1371 u8 is_green = lq_sta->is_green;
1372 struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1373 struct iwl_scale_tbl_info *search_tbl =
1374 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1375 struct iwl_rate_scale_data *window = &(tbl->win[index]);
1376 u32 sz = (sizeof(struct iwl_scale_tbl_info) -
1377 (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
1378 u8 start_action = tbl->action;
1379 u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
1380 u8 tx_chains_num = priv->hw_params.tx_chains_num;
1384 lq_sta->action_counter++;
1385 switch (tbl->action) {
1386 case IWL_SISO_SWITCH_ANTENNA1:
1387 case IWL_SISO_SWITCH_ANTENNA2:
1388 IWL_DEBUG_RATE("LQ: SISO toggle Antenna\n");
1390 if ((tbl->action == IWL_SISO_SWITCH_ANTENNA1 &&
1391 tx_chains_num <= 1) ||
1392 (tbl->action == IWL_SISO_SWITCH_ANTENNA2 &&
1393 tx_chains_num <= 2))
1396 if (window->success_ratio >= IWL_RS_GOOD_RATIO)
1399 memcpy(search_tbl, tbl, sz);
1400 if (rs_toggle_antenna(valid_tx_ant,
1401 &search_tbl->current_rate, search_tbl))
1404 case IWL_SISO_SWITCH_MIMO2_AB:
1405 case IWL_SISO_SWITCH_MIMO2_AC:
1406 case IWL_SISO_SWITCH_MIMO2_BC:
1407 IWL_DEBUG_RATE("LQ: SISO switch to MIMO2\n");
1408 memcpy(search_tbl, tbl, sz);
1409 search_tbl->is_SGI = 0;
1411 if (tbl->action == IWL_SISO_SWITCH_MIMO2_AB)
1412 search_tbl->ant_type = ANT_AB;
1413 else if (tbl->action == IWL_SISO_SWITCH_MIMO2_AC)
1414 search_tbl->ant_type = ANT_AC;
1416 search_tbl->ant_type = ANT_BC;
1418 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
1421 ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
1426 case IWL_SISO_SWITCH_GI:
1428 !(priv->current_ht_config.sgf &
1432 !(priv->current_ht_config.sgf &
1436 IWL_DEBUG_RATE("LQ: SISO toggle SGI/NGI\n");
1438 memcpy(search_tbl, tbl, sz);
1444 "SGI was set in GF+SISO\n");
1446 search_tbl->is_SGI = !tbl->is_SGI;
1447 rs_set_expected_tpt_table(lq_sta, search_tbl);
1449 s32 tpt = lq_sta->last_tpt / 100;
1450 if (tpt >= search_tbl->expected_tpt[index])
1453 search_tbl->current_rate =
1454 rate_n_flags_from_tbl(priv, search_tbl,
1459 if (tbl->action > IWL_SISO_SWITCH_GI)
1460 tbl->action = IWL_SISO_SWITCH_ANTENNA1;
1462 if (tbl->action == start_action)
1465 search_tbl->lq_type = LQ_NONE;
1469 lq_sta->search_better_tbl = 1;
1471 if (tbl->action > IWL_SISO_SWITCH_GI)
1472 tbl->action = IWL_SISO_SWITCH_ANTENNA1;
1477 * Try to switch to new modulation mode from MIMO
1479 static int rs_move_mimo_to_other(struct iwl_priv *priv,
1480 struct iwl_lq_sta *lq_sta,
1481 struct ieee80211_conf *conf,
1482 struct ieee80211_sta *sta, int index)
1484 s8 is_green = lq_sta->is_green;
1485 struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1486 struct iwl_scale_tbl_info *search_tbl =
1487 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1488 struct iwl_rate_scale_data *window = &(tbl->win[index]);
1489 u32 sz = (sizeof(struct iwl_scale_tbl_info) -
1490 (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
1491 u8 start_action = tbl->action;
1492 u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
1493 u8 tx_chains_num = priv->hw_params.tx_chains_num;
1497 lq_sta->action_counter++;
1498 switch (tbl->action) {
1499 case IWL_MIMO2_SWITCH_ANTENNA1:
1500 case IWL_MIMO2_SWITCH_ANTENNA2:
1501 IWL_DEBUG_RATE("LQ: MIMO toggle Antennas\n");
1503 if (tx_chains_num <= 2)
1506 if (window->success_ratio >= IWL_RS_GOOD_RATIO)
1509 memcpy(search_tbl, tbl, sz);
1510 if (rs_toggle_antenna(valid_tx_ant,
1511 &search_tbl->current_rate, search_tbl))
1514 case IWL_MIMO2_SWITCH_SISO_A:
1515 case IWL_MIMO2_SWITCH_SISO_B:
1516 case IWL_MIMO2_SWITCH_SISO_C:
1517 IWL_DEBUG_RATE("LQ: MIMO2 switch to SISO\n");
1519 /* Set up new search table for SISO */
1520 memcpy(search_tbl, tbl, sz);
1522 if (tbl->action == IWL_MIMO2_SWITCH_SISO_A)
1523 search_tbl->ant_type = ANT_A;
1524 else if (tbl->action == IWL_MIMO2_SWITCH_SISO_B)
1525 search_tbl->ant_type = ANT_B;
1527 search_tbl->ant_type = ANT_C;
1529 if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
1532 ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
1539 case IWL_MIMO2_SWITCH_GI:
1541 !(priv->current_ht_config.sgf &
1545 !(priv->current_ht_config.sgf &
1549 IWL_DEBUG_RATE("LQ: MIMO toggle SGI/NGI\n");
1551 /* Set up new search table for MIMO */
1552 memcpy(search_tbl, tbl, sz);
1553 search_tbl->is_SGI = !tbl->is_SGI;
1554 rs_set_expected_tpt_table(lq_sta, search_tbl);
1556 * If active table already uses the fastest possible
1557 * modulation (dual stream with short guard interval),
1558 * and it's working well, there's no need to look
1559 * for a better type of modulation!
1562 s32 tpt = lq_sta->last_tpt / 100;
1563 if (tpt >= search_tbl->expected_tpt[index])
1566 search_tbl->current_rate =
1567 rate_n_flags_from_tbl(priv, search_tbl,
1573 if (tbl->action > IWL_MIMO2_SWITCH_GI)
1574 tbl->action = IWL_MIMO2_SWITCH_ANTENNA1;
1576 if (tbl->action == start_action)
1579 search_tbl->lq_type = LQ_NONE;
1582 lq_sta->search_better_tbl = 1;
1584 if (tbl->action > IWL_MIMO2_SWITCH_GI)
1585 tbl->action = IWL_MIMO2_SWITCH_ANTENNA1;
1591 * Check whether we should continue using same modulation mode, or
1592 * begin search for a new mode, based on:
1593 * 1) # tx successes or failures while using this mode
1594 * 2) # times calling this function
1595 * 3) elapsed time in this mode (not used, for now)
1597 static void rs_stay_in_table(struct iwl_lq_sta *lq_sta)
1599 struct iwl_scale_tbl_info *tbl;
1602 int flush_interval_passed = 0;
1603 struct iwl_priv *priv;
1606 active_tbl = lq_sta->active_tbl;
1608 tbl = &(lq_sta->lq_info[active_tbl]);
1610 /* If we've been disallowing search, see if we should now allow it */
1611 if (lq_sta->stay_in_tbl) {
1613 /* Elapsed time using current modulation mode */
1614 if (lq_sta->flush_timer)
1615 flush_interval_passed =
1617 (unsigned long)(lq_sta->flush_timer +
1618 IWL_RATE_SCALE_FLUSH_INTVL));
1621 * Check if we should allow search for new modulation mode.
1622 * If many frames have failed or succeeded, or we've used
1623 * this same modulation for a long time, allow search, and
1624 * reset history stats that keep track of whether we should
1625 * allow a new search. Also (below) reset all bitmaps and
1626 * stats in active history.
1628 if ((lq_sta->total_failed > lq_sta->max_failure_limit) ||
1629 (lq_sta->total_success > lq_sta->max_success_limit) ||
1630 ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer)
1631 && (flush_interval_passed))) {
1632 IWL_DEBUG_RATE("LQ: stay is expired %d %d %d\n:",
1633 lq_sta->total_failed,
1634 lq_sta->total_success,
1635 flush_interval_passed);
1637 /* Allow search for new mode */
1638 lq_sta->stay_in_tbl = 0; /* only place reset */
1639 lq_sta->total_failed = 0;
1640 lq_sta->total_success = 0;
1641 lq_sta->flush_timer = 0;
1644 * Else if we've used this modulation mode enough repetitions
1645 * (regardless of elapsed time or success/failure), reset
1646 * history bitmaps and rate-specific stats for all rates in
1650 lq_sta->table_count++;
1651 if (lq_sta->table_count >=
1652 lq_sta->table_count_limit) {
1653 lq_sta->table_count = 0;
1655 IWL_DEBUG_RATE("LQ: stay in table clear win\n");
1656 for (i = 0; i < IWL_RATE_COUNT; i++)
1657 rs_rate_scale_clear_window(
1662 /* If transitioning to allow "search", reset all history
1663 * bitmaps and stats in active table (this will become the new
1664 * "search" table). */
1665 if (!lq_sta->stay_in_tbl) {
1666 for (i = 0; i < IWL_RATE_COUNT; i++)
1667 rs_rate_scale_clear_window(&(tbl->win[i]));
1673 * Do rate scaling and search for new modulation mode.
1675 static void rs_rate_scale_perform(struct iwl_priv *priv,
1676 struct ieee80211_hdr *hdr,
1677 struct ieee80211_sta *sta,
1678 struct iwl_lq_sta *lq_sta)
1680 struct ieee80211_hw *hw = priv->hw;
1681 struct ieee80211_conf *conf = &hw->conf;
1682 int low = IWL_RATE_INVALID;
1683 int high = IWL_RATE_INVALID;
1686 struct iwl_rate_scale_data *window = NULL;
1687 int current_tpt = IWL_INVALID_VALUE;
1688 int low_tpt = IWL_INVALID_VALUE;
1689 int high_tpt = IWL_INVALID_VALUE;
1691 s8 scale_action = 0;
1694 struct iwl_scale_tbl_info *tbl, *tbl1;
1695 u16 rate_scale_index_msk = 0;
1702 u8 tid = MAX_TID_COUNT;
1704 IWL_DEBUG_RATE("rate scale calculate new rate for skb\n");
1706 /* Send management frames and broadcast/multicast data using
1708 /* TODO: this could probably be improved.. */
1709 if (!ieee80211_is_data(hdr->frame_control) ||
1710 is_multicast_ether_addr(hdr->addr1))
1713 if (!sta || !lq_sta)
1716 lq_sta->supp_rates = sta->supp_rates[lq_sta->band];
1718 tid = rs_tl_add_packet(lq_sta, hdr);
1721 * Select rate-scale / modulation-mode table to work with in
1722 * the rest of this function: "search" if searching for better
1723 * modulation mode, or "active" if doing rate scaling within a mode.
1725 if (!lq_sta->search_better_tbl)
1726 active_tbl = lq_sta->active_tbl;
1728 active_tbl = 1 - lq_sta->active_tbl;
1730 tbl = &(lq_sta->lq_info[active_tbl]);
1731 is_green = lq_sta->is_green;
1733 /* current tx rate */
1734 index = lq_sta->last_txrate_idx;
1736 IWL_DEBUG_RATE("Rate scale index %d for type %d\n", index,
1739 /* rates available for this association, and for modulation mode */
1740 rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
1742 IWL_DEBUG_RATE("mask 0x%04X \n", rate_mask);
1744 /* mask with station rate restriction */
1745 if (is_legacy(tbl->lq_type)) {
1746 if (lq_sta->band == IEEE80211_BAND_5GHZ)
1747 /* supp_rates has no CCK bits in A mode */
1748 rate_scale_index_msk = (u16) (rate_mask &
1749 (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
1751 rate_scale_index_msk = (u16) (rate_mask &
1752 lq_sta->supp_rates);
1755 rate_scale_index_msk = rate_mask;
1757 if (!rate_scale_index_msk)
1758 rate_scale_index_msk = rate_mask;
1760 if (!((1 << index) & rate_scale_index_msk)) {
1761 IWL_ERR(priv, "Current Rate is not valid\n");
1765 /* Get expected throughput table and history window for current rate */
1766 if (!tbl->expected_tpt) {
1767 IWL_ERR(priv, "tbl->expected_tpt is NULL\n");
1771 /* force user max rate if set by user */
1772 if ((lq_sta->max_rate_idx != -1) &&
1773 (lq_sta->max_rate_idx < index)) {
1774 index = lq_sta->max_rate_idx;
1776 window = &(tbl->win[index]);
1780 window = &(tbl->win[index]);
1783 * If there is not enough history to calculate actual average
1784 * throughput, keep analyzing results of more tx frames, without
1785 * changing rate or mode (bypass most of the rest of this function).
1786 * Set up new rate table in uCode only if old rate is not supported
1787 * in current association (use new rate found above).
1789 fail_count = window->counter - window->success_counter;
1790 if ((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
1791 (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) {
1792 IWL_DEBUG_RATE("LQ: still below TH. succ=%d total=%d "
1794 window->success_counter, window->counter, index);
1796 /* Can't calculate this yet; not enough history */
1797 window->average_tpt = IWL_INVALID_VALUE;
1799 /* Should we stay with this modulation mode,
1800 * or search for a new one? */
1801 rs_stay_in_table(lq_sta);
1806 /* Else we have enough samples; calculate estimate of
1807 * actual average throughput */
1809 BUG_ON(window->average_tpt != ((window->success_ratio *
1810 tbl->expected_tpt[index] + 64) / 128));
1812 /* If we are searching for better modulation mode, check success. */
1813 if (lq_sta->search_better_tbl) {
1815 /* If good success, continue using the "search" mode;
1816 * no need to send new link quality command, since we're
1817 * continuing to use the setup that we've been trying. */
1818 if (window->average_tpt > lq_sta->last_tpt) {
1820 IWL_DEBUG_RATE("LQ: SWITCHING TO NEW TABLE "
1821 "suc=%d cur-tpt=%d old-tpt=%d\n",
1822 window->success_ratio,
1823 window->average_tpt,
1826 if (!is_legacy(tbl->lq_type))
1827 lq_sta->enable_counter = 1;
1829 /* Swap tables; "search" becomes "active" */
1830 lq_sta->active_tbl = active_tbl;
1831 current_tpt = window->average_tpt;
1833 /* Else poor success; go back to mode in "active" table */
1836 IWL_DEBUG_RATE("LQ: GOING BACK TO THE OLD TABLE "
1837 "suc=%d cur-tpt=%d old-tpt=%d\n",
1838 window->success_ratio,
1839 window->average_tpt,
1842 /* Nullify "search" table */
1843 tbl->lq_type = LQ_NONE;
1845 /* Revert to "active" table */
1846 active_tbl = lq_sta->active_tbl;
1847 tbl = &(lq_sta->lq_info[active_tbl]);
1849 /* Revert to "active" rate and throughput info */
1850 index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
1851 current_tpt = lq_sta->last_tpt;
1853 /* Need to set up a new rate table in uCode */
1857 /* Either way, we've made a decision; modulation mode
1858 * search is done, allow rate adjustment next time. */
1859 lq_sta->search_better_tbl = 0;
1860 done_search = 1; /* Don't switch modes below! */
1864 /* (Else) not in search of better modulation mode, try for better
1865 * starting rate, while staying in this mode. */
1866 high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk,
1868 low = high_low & 0xff;
1869 high = (high_low >> 8) & 0xff;
1871 /* If user set max rate, dont allow higher than user constrain */
1872 if ((lq_sta->max_rate_idx != -1) &&
1873 (lq_sta->max_rate_idx < high))
1874 high = IWL_RATE_INVALID;
1876 sr = window->success_ratio;
1878 /* Collect measured throughputs for current and adjacent rates */
1879 current_tpt = window->average_tpt;
1880 if (low != IWL_RATE_INVALID)
1881 low_tpt = tbl->win[low].average_tpt;
1882 if (high != IWL_RATE_INVALID)
1883 high_tpt = tbl->win[high].average_tpt;
1887 /* Too many failures, decrease rate */
1888 if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) {
1889 IWL_DEBUG_RATE("decrease rate because of low success_ratio\n");
1892 /* No throughput measured yet for adjacent rates; try increase. */
1893 } else if ((low_tpt == IWL_INVALID_VALUE) &&
1894 (high_tpt == IWL_INVALID_VALUE)) {
1896 if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH)
1898 else if (low != IWL_RATE_INVALID)
1902 /* Both adjacent throughputs are measured, but neither one has better
1903 * throughput; we're using the best rate, don't change it! */
1904 else if ((low_tpt != IWL_INVALID_VALUE) &&
1905 (high_tpt != IWL_INVALID_VALUE) &&
1906 (low_tpt < current_tpt) &&
1907 (high_tpt < current_tpt))
1910 /* At least one adjacent rate's throughput is measured,
1911 * and may have better performance. */
1913 /* Higher adjacent rate's throughput is measured */
1914 if (high_tpt != IWL_INVALID_VALUE) {
1915 /* Higher rate has better throughput */
1916 if (high_tpt > current_tpt &&
1917 sr >= IWL_RATE_INCREASE_TH) {
1921 ("decrease rate because of high tpt\n");
1925 /* Lower adjacent rate's throughput is measured */
1926 } else if (low_tpt != IWL_INVALID_VALUE) {
1927 /* Lower rate has better throughput */
1928 if (low_tpt > current_tpt) {
1930 ("decrease rate because of low tpt\n");
1932 } else if (sr >= IWL_RATE_INCREASE_TH) {
1938 /* Sanity check; asked for decrease, but success rate or throughput
1939 * has been good at old rate. Don't change it. */
1940 if ((scale_action == -1) && (low != IWL_RATE_INVALID) &&
1941 ((sr > IWL_RATE_HIGH_TH) ||
1942 (current_tpt > (100 * tbl->expected_tpt[low]))))
1945 switch (scale_action) {
1947 /* Decrease starting rate, update uCode's rate table */
1948 if (low != IWL_RATE_INVALID) {
1954 /* Increase starting rate, update uCode's rate table */
1955 if (high != IWL_RATE_INVALID) {
1967 IWL_DEBUG_RATE("choose rate scale index %d action %d low %d "
1968 "high %d type %d\n",
1969 index, scale_action, low, high, tbl->lq_type);
1972 /* Replace uCode's rate table for the destination station. */
1974 rate = rate_n_flags_from_tbl(priv, tbl, index, is_green);
1975 rs_fill_link_cmd(priv, lq_sta, rate);
1976 iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
1979 /* Should we stay with this modulation mode, or search for a new one? */
1980 rs_stay_in_table(lq_sta);
1983 * Search for new modulation mode if we're:
1984 * 1) Not changing rates right now
1985 * 2) Not just finishing up a search
1986 * 3) Allowing a new search
1988 if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) {
1989 /* Save current throughput to compare with "search" throughput*/
1990 lq_sta->last_tpt = current_tpt;
1992 /* Select a new "search" modulation mode to try.
1993 * If one is found, set up the new "search" table. */
1994 if (is_legacy(tbl->lq_type))
1995 rs_move_legacy_other(priv, lq_sta, conf, sta, index);
1996 else if (is_siso(tbl->lq_type))
1997 rs_move_siso_to_other(priv, lq_sta, conf, sta, index);
1999 rs_move_mimo_to_other(priv, lq_sta, conf, sta, index);
2001 /* If new "search" mode was selected, set up in uCode table */
2002 if (lq_sta->search_better_tbl) {
2003 /* Access the "search" table, clear its history. */
2004 tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
2005 for (i = 0; i < IWL_RATE_COUNT; i++)
2006 rs_rate_scale_clear_window(&(tbl->win[i]));
2008 /* Use new "search" start rate */
2009 index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
2011 IWL_DEBUG_RATE("Switch current mcs: %X index: %d\n",
2012 tbl->current_rate, index);
2013 rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
2014 iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
2017 /* If the "active" (non-search) mode was legacy,
2018 * and we've tried switching antennas,
2019 * but we haven't been able to try HT modes (not available),
2020 * stay with best antenna legacy modulation for a while
2021 * before next round of mode comparisons. */
2022 tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
2023 if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) &&
2024 lq_sta->action_counter >= 1) {
2025 lq_sta->action_counter = 0;
2026 IWL_DEBUG_RATE("LQ: STAY in legacy table\n");
2027 rs_set_stay_in_table(priv, 1, lq_sta);
2030 /* If we're in an HT mode, and all 3 mode switch actions
2031 * have been tried and compared, stay in this best modulation
2032 * mode for a while before next round of mode comparisons. */
2033 if (lq_sta->enable_counter &&
2034 (lq_sta->action_counter >= IWL_ACTION_LIMIT)) {
2035 if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) &&
2036 (lq_sta->tx_agg_tid_en & (1 << tid)) &&
2037 (tid != MAX_TID_COUNT)) {
2038 IWL_DEBUG_RATE("try to aggregate tid %d\n", tid);
2039 rs_tl_turn_on_agg(priv, tid, lq_sta, sta);
2041 lq_sta->action_counter = 0;
2042 rs_set_stay_in_table(priv, 0, lq_sta);
2046 * Else, don't search for a new modulation mode.
2047 * Put new timestamp in stay-in-modulation-mode flush timer if:
2048 * 1) Not changing rates right now
2049 * 2) Not just finishing up a search
2050 * 3) flush timer is empty
2053 if ((!update_lq) && (!done_search) && (!lq_sta->flush_timer))
2054 lq_sta->flush_timer = jiffies;
2058 tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, index, is_green);
2060 lq_sta->last_txrate_idx = i;
2066 static void rs_initialize_lq(struct iwl_priv *priv,
2067 struct ieee80211_conf *conf,
2068 struct ieee80211_sta *sta,
2069 struct iwl_lq_sta *lq_sta)
2071 struct iwl_scale_tbl_info *tbl;
2075 u8 use_green = rs_use_green(priv, conf);
2079 if (!sta || !lq_sta)
2082 i = lq_sta->last_txrate_idx;
2084 if ((lq_sta->lq.sta_id == 0xff) &&
2085 (priv->iw_mode == NL80211_IFTYPE_ADHOC))
2088 valid_tx_ant = priv->hw_params.valid_tx_ant;
2090 if (!lq_sta->search_better_tbl)
2091 active_tbl = lq_sta->active_tbl;
2093 active_tbl = 1 - lq_sta->active_tbl;
2095 tbl = &(lq_sta->lq_info[active_tbl]);
2097 if ((i < 0) || (i >= IWL_RATE_COUNT))
2100 rate = iwl_rates[i].plcp;
2101 tbl->ant_type = first_antenna(valid_tx_ant);
2102 rate |= tbl->ant_type << RATE_MCS_ANT_POS;
2104 if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE)
2105 rate |= RATE_MCS_CCK_MSK;
2107 rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx);
2108 if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type))
2109 rs_toggle_antenna(valid_tx_ant, &rate, tbl);
2111 rate = rate_n_flags_from_tbl(priv, tbl, rate_idx, use_green);
2112 tbl->current_rate = rate;
2113 rs_set_expected_tpt_table(lq_sta, tbl);
2114 rs_fill_link_cmd(NULL, lq_sta, rate);
2115 iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
2120 static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
2121 struct ieee80211_tx_rate_control *txrc)
2124 struct sk_buff *skb = txrc->skb;
2125 struct ieee80211_supported_band *sband = txrc->sband;
2126 struct iwl_priv *priv = (struct iwl_priv *)priv_r;
2127 struct ieee80211_conf *conf = &priv->hw->conf;
2128 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
2129 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
2130 struct iwl_lq_sta *lq_sta = priv_sta;
2134 IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n");
2136 /* Get max rate if user set max rate */
2138 lq_sta->max_rate_idx = txrc->max_rate_idx;
2139 if ((sband->band == IEEE80211_BAND_5GHZ) &&
2140 (lq_sta->max_rate_idx != -1))
2141 lq_sta->max_rate_idx += IWL_FIRST_OFDM_RATE;
2142 if ((lq_sta->max_rate_idx < 0) ||
2143 (lq_sta->max_rate_idx >= IWL_RATE_COUNT))
2144 lq_sta->max_rate_idx = -1;
2148 mask_bit = sta->supp_rates[sband->band];
2150 /* Send management frames and broadcast/multicast data using lowest
2152 if (!ieee80211_is_data(hdr->frame_control) ||
2153 is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) {
2155 info->control.rates[0].idx =
2156 rate_lowest_index(sband, NULL);
2158 info->control.rates[0].idx =
2159 rate_lowest_index(sband, sta);
2163 rate_idx = lq_sta->last_txrate_idx;
2165 if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) &&
2166 !lq_sta->ibss_sta_added) {
2167 u8 sta_id = iwl_find_station(priv, hdr->addr1);
2169 if (sta_id == IWL_INVALID_STATION) {
2170 IWL_DEBUG_RATE("LQ: ADD station %pM\n",
2172 sta_id = iwl_add_station_flags(priv, hdr->addr1,
2173 0, CMD_ASYNC, NULL);
2175 if ((sta_id != IWL_INVALID_STATION)) {
2176 lq_sta->lq.sta_id = sta_id;
2177 lq_sta->lq.rs_table[0].rate_n_flags = 0;
2178 lq_sta->ibss_sta_added = 1;
2179 rs_initialize_lq(priv, conf, sta, lq_sta);
2183 if (rate_idx < 0 || rate_idx > IWL_RATE_COUNT)
2184 rate_idx = rate_lowest_index(sband, sta);
2185 else if (sband->band == IEEE80211_BAND_5GHZ)
2186 rate_idx -= IWL_FIRST_OFDM_RATE;
2188 info->control.rates[0].idx = rate_idx;
2191 static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta,
2194 struct iwl_lq_sta *lq_sta;
2195 struct iwl_priv *priv;
2198 priv = (struct iwl_priv *)priv_rate;
2199 IWL_DEBUG_RATE("create station rate scale window\n");
2201 lq_sta = kzalloc(sizeof(struct iwl_lq_sta), gfp);
2205 lq_sta->lq.sta_id = 0xff;
2208 for (j = 0; j < LQ_SIZE; j++)
2209 for (i = 0; i < IWL_RATE_COUNT; i++)
2210 rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
2215 static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband,
2216 struct ieee80211_sta *sta, void *priv_sta)
2219 struct iwl_priv *priv = (struct iwl_priv *)priv_r;
2220 struct ieee80211_conf *conf = &priv->hw->conf;
2221 struct iwl_lq_sta *lq_sta = priv_sta;
2226 lq_sta->flush_timer = 0;
2227 lq_sta->supp_rates = sta->supp_rates[sband->band];
2228 for (j = 0; j < LQ_SIZE; j++)
2229 for (i = 0; i < IWL_RATE_COUNT; i++)
2230 rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
2232 IWL_DEBUG_RATE("LQ: *** rate scale station global init ***\n");
2233 /* TODO: what is a good starting rate for STA? About middle? Maybe not
2234 * the lowest or the highest rate.. Could consider using RSSI from
2235 * previous packets? Need to have IEEE 802.1X auth succeed immediately
2238 lq_sta->ibss_sta_added = 0;
2239 if (priv->iw_mode == NL80211_IFTYPE_AP) {
2240 u8 sta_id = iwl_find_station(priv, sta->addr);
2242 /* for IBSS the call are from tasklet */
2243 IWL_DEBUG_RATE("LQ: ADD station %pM\n", sta->addr);
2245 if (sta_id == IWL_INVALID_STATION) {
2246 IWL_DEBUG_RATE("LQ: ADD station %pM\n", sta->addr);
2247 sta_id = iwl_add_station_flags(priv, sta->addr,
2248 0, CMD_ASYNC, NULL);
2250 if ((sta_id != IWL_INVALID_STATION)) {
2251 lq_sta->lq.sta_id = sta_id;
2252 lq_sta->lq.rs_table[0].rate_n_flags = 0;
2254 /* FIXME: this is w/a remove it later */
2255 priv->assoc_station_added = 1;
2259 lq_sta->max_rate_idx = -1;
2260 lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX;
2261 lq_sta->is_green = rs_use_green(priv, conf);
2262 lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000);
2263 lq_sta->active_rate_basic = priv->active_rate_basic;
2264 lq_sta->band = priv->band;
2266 * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
2267 * supp_rates[] does not; shift to convert format, force 9 MBits off.
2269 lq_sta->active_siso_rate = sta->ht_cap.mcs.rx_mask[0] << 1;
2270 lq_sta->active_siso_rate |= sta->ht_cap.mcs.rx_mask[0] & 0x1;
2271 lq_sta->active_siso_rate &= ~((u16)0x2);
2272 lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE;
2275 lq_sta->active_mimo2_rate = sta->ht_cap.mcs.rx_mask[1] << 1;
2276 lq_sta->active_mimo2_rate |= sta->ht_cap.mcs.rx_mask[1] & 0x1;
2277 lq_sta->active_mimo2_rate &= ~((u16)0x2);
2278 lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE;
2280 lq_sta->active_mimo3_rate = sta->ht_cap.mcs.rx_mask[2] << 1;
2281 lq_sta->active_mimo3_rate |= sta->ht_cap.mcs.rx_mask[2] & 0x1;
2282 lq_sta->active_mimo3_rate &= ~((u16)0x2);
2283 lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE;
2285 IWL_DEBUG_RATE("SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n",
2286 lq_sta->active_siso_rate,
2287 lq_sta->active_mimo2_rate,
2288 lq_sta->active_mimo3_rate);
2290 /* These values will be overridden later */
2291 lq_sta->lq.general_params.single_stream_ant_msk = ANT_A;
2292 lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB;
2294 /* as default allow aggregation for all tids */
2295 lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID;
2298 /* Find highest tx rate supported by hardware and destination station */
2299 mask_bit = sta->supp_rates[sband->band];
2300 count = sband->n_bitrates;
2301 if (sband->band == IEEE80211_BAND_5GHZ) {
2302 count += IWL_FIRST_OFDM_RATE;
2303 start_rate = IWL_FIRST_OFDM_RATE;
2304 mask_bit <<= IWL_FIRST_OFDM_RATE;
2307 mask_bit = mask_bit & lq_sta->active_legacy_rate;
2308 lq_sta->last_txrate_idx = 4;
2309 for (i = start_rate; i < count; i++)
2310 if (mask_bit & BIT(i))
2311 lq_sta->last_txrate_idx = i;
2313 rs_initialize_lq(priv, conf, sta, lq_sta);
2316 static void rs_fill_link_cmd(const struct iwl_priv *priv,
2317 struct iwl_lq_sta *lq_sta, u32 new_rate)
2319 struct iwl_scale_tbl_info tbl_type;
2322 int repeat_rate = 0;
2323 u8 ant_toggle_cnt = 0;
2324 u8 use_ht_possible = 1;
2325 u8 valid_tx_ant = 0;
2326 struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq;
2328 /* Override starting rate (index 0) if needed for debug purposes */
2329 rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
2331 /* Interpret new_rate (rate_n_flags) */
2332 memset(&tbl_type, 0, sizeof(tbl_type));
2333 rs_get_tbl_info_from_mcs(new_rate, lq_sta->band,
2334 &tbl_type, &rate_idx);
2336 /* How many times should we repeat the initial rate? */
2337 if (is_legacy(tbl_type.lq_type)) {
2339 repeat_rate = IWL_NUMBER_TRY;
2341 repeat_rate = IWL_HT_NUMBER_TRY;
2344 lq_cmd->general_params.mimo_delimiter =
2345 is_mimo(tbl_type.lq_type) ? 1 : 0;
2347 /* Fill 1st table entry (index 0) */
2348 lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
2350 if (num_of_ant(tbl_type.ant_type) == 1) {
2351 lq_cmd->general_params.single_stream_ant_msk =
2353 } else if (num_of_ant(tbl_type.ant_type) == 2) {
2354 lq_cmd->general_params.dual_stream_ant_msk =
2356 } /* otherwise we don't modify the existing value */
2362 valid_tx_ant = priv->hw_params.valid_tx_ant;
2364 /* Fill rest of rate table */
2365 while (index < LINK_QUAL_MAX_RETRY_NUM) {
2366 /* Repeat initial/next rate.
2367 * For legacy IWL_NUMBER_TRY == 1, this loop will not execute.
2368 * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */
2369 while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) {
2370 if (is_legacy(tbl_type.lq_type)) {
2371 if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
2374 rs_toggle_antenna(valid_tx_ant,
2375 &new_rate, &tbl_type))
2379 /* Override next rate if needed for debug purposes */
2380 rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
2382 /* Fill next table entry */
2383 lq_cmd->rs_table[index].rate_n_flags =
2384 cpu_to_le32(new_rate);
2389 rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type,
2392 /* Indicate to uCode which entries might be MIMO.
2393 * If initial rate was MIMO, this will finally end up
2394 * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
2395 if (is_mimo(tbl_type.lq_type))
2396 lq_cmd->general_params.mimo_delimiter = index;
2399 new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx,
2402 /* How many times should we repeat the next rate? */
2403 if (is_legacy(tbl_type.lq_type)) {
2404 if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
2407 rs_toggle_antenna(valid_tx_ant,
2408 &new_rate, &tbl_type))
2411 repeat_rate = IWL_NUMBER_TRY;
2413 repeat_rate = IWL_HT_NUMBER_TRY;
2416 /* Don't allow HT rates after next pass.
2417 * rs_get_lower_rate() will change type to LQ_A or LQ_G. */
2418 use_ht_possible = 0;
2420 /* Override next rate if needed for debug purposes */
2421 rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
2423 /* Fill next table entry */
2424 lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
2430 lq_cmd->agg_params.agg_frame_cnt_limit = 64;
2431 lq_cmd->agg_params.agg_dis_start_th = 3;
2432 lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000);
2435 static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
2439 /* rate scale requires free function to be implemented */
2440 static void rs_free(void *priv_rate)
2445 static void rs_free_sta(void *priv_r, struct ieee80211_sta *sta,
2448 struct iwl_lq_sta *lq_sta = priv_sta;
2449 struct iwl_priv *priv __maybe_unused = priv_r;
2451 IWL_DEBUG_RATE("enter\n");
2453 IWL_DEBUG_RATE("leave\n");
2457 #ifdef CONFIG_MAC80211_DEBUGFS
2458 static int open_file_generic(struct inode *inode, struct file *file)
2460 file->private_data = inode->i_private;
2463 static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
2464 u32 *rate_n_flags, int index)
2466 struct iwl_priv *priv;
2469 if (lq_sta->dbg_fixed_rate) {
2471 *rate_n_flags = lq_sta->dbg_fixed_rate;
2473 if (lq_sta->band == IEEE80211_BAND_5GHZ)
2474 *rate_n_flags = 0x800D;
2476 *rate_n_flags = 0x820A;
2478 IWL_DEBUG_RATE("Fixed rate ON\n");
2480 IWL_DEBUG_RATE("Fixed rate OFF\n");
2484 static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file,
2485 const char __user *user_buf, size_t count, loff_t *ppos)
2487 struct iwl_lq_sta *lq_sta = file->private_data;
2488 struct iwl_priv *priv;
2494 memset(buf, 0, sizeof(buf));
2495 buf_size = min(count, sizeof(buf) - 1);
2496 if (copy_from_user(buf, user_buf, buf_size))
2499 if (sscanf(buf, "%x", &parsed_rate) == 1)
2500 lq_sta->dbg_fixed_rate = parsed_rate;
2502 lq_sta->dbg_fixed_rate = 0;
2504 lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */
2505 lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
2506 lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
2507 lq_sta->active_mimo3_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
2509 IWL_DEBUG_RATE("sta_id %d rate 0x%X\n",
2510 lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate);
2512 if (lq_sta->dbg_fixed_rate) {
2513 rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate);
2514 iwl_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC);
2520 static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
2521 char __user *user_buf, size_t count, loff_t *ppos)
2527 struct iwl_lq_sta *lq_sta = file->private_data;
2529 desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id);
2530 desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n",
2531 lq_sta->total_failed, lq_sta->total_success,
2532 lq_sta->active_legacy_rate);
2533 desc += sprintf(buff+desc, "fixed rate 0x%X\n",
2534 lq_sta->dbg_fixed_rate);
2535 desc += sprintf(buff+desc, "general:"
2536 "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
2537 lq_sta->lq.general_params.flags,
2538 lq_sta->lq.general_params.mimo_delimiter,
2539 lq_sta->lq.general_params.single_stream_ant_msk,
2540 lq_sta->lq.general_params.dual_stream_ant_msk);
2542 desc += sprintf(buff+desc, "agg:"
2543 "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n",
2544 le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit),
2545 lq_sta->lq.agg_params.agg_dis_start_th,
2546 lq_sta->lq.agg_params.agg_frame_cnt_limit);
2548 desc += sprintf(buff+desc,
2549 "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n",
2550 lq_sta->lq.general_params.start_rate_index[0],
2551 lq_sta->lq.general_params.start_rate_index[1],
2552 lq_sta->lq.general_params.start_rate_index[2],
2553 lq_sta->lq.general_params.start_rate_index[3]);
2556 for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
2557 desc += sprintf(buff+desc, " rate[%d] 0x%X\n",
2558 i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags));
2560 return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
2563 static const struct file_operations rs_sta_dbgfs_scale_table_ops = {
2564 .write = rs_sta_dbgfs_scale_table_write,
2565 .read = rs_sta_dbgfs_scale_table_read,
2566 .open = open_file_generic,
2568 static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file,
2569 char __user *user_buf, size_t count, loff_t *ppos)
2575 struct iwl_lq_sta *lq_sta = file->private_data;
2576 for (i = 0; i < LQ_SIZE; i++) {
2577 desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d\n"
2579 lq_sta->active_tbl == i ? "*" : "x",
2580 lq_sta->lq_info[i].lq_type,
2581 lq_sta->lq_info[i].is_SGI,
2582 lq_sta->lq_info[i].is_fat,
2583 lq_sta->lq_info[i].is_dup,
2584 lq_sta->lq_info[i].current_rate);
2585 for (j = 0; j < IWL_RATE_COUNT; j++) {
2586 desc += sprintf(buff+desc,
2587 "counter=%d success=%d %%=%d\n",
2588 lq_sta->lq_info[i].win[j].counter,
2589 lq_sta->lq_info[i].win[j].success_counter,
2590 lq_sta->lq_info[i].win[j].success_ratio);
2593 return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
2596 static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
2597 .read = rs_sta_dbgfs_stats_table_read,
2598 .open = open_file_generic,
2601 static void rs_add_debugfs(void *priv, void *priv_sta,
2604 struct iwl_lq_sta *lq_sta = priv_sta;
2605 lq_sta->rs_sta_dbgfs_scale_table_file =
2606 debugfs_create_file("rate_scale_table", 0600, dir,
2607 lq_sta, &rs_sta_dbgfs_scale_table_ops);
2608 lq_sta->rs_sta_dbgfs_stats_table_file =
2609 debugfs_create_file("rate_stats_table", 0600, dir,
2610 lq_sta, &rs_sta_dbgfs_stats_table_ops);
2611 lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file =
2612 debugfs_create_u8("tx_agg_tid_enable", 0600, dir,
2613 &lq_sta->tx_agg_tid_en);
2617 static void rs_remove_debugfs(void *priv, void *priv_sta)
2619 struct iwl_lq_sta *lq_sta = priv_sta;
2620 debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file);
2621 debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
2622 debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file);
2626 static struct rate_control_ops rs_ops = {
2629 .tx_status = rs_tx_status,
2630 .get_rate = rs_get_rate,
2631 .rate_init = rs_rate_init,
2634 .alloc_sta = rs_alloc_sta,
2635 .free_sta = rs_free_sta,
2636 #ifdef CONFIG_MAC80211_DEBUGFS
2637 .add_sta_debugfs = rs_add_debugfs,
2638 .remove_sta_debugfs = rs_remove_debugfs,
2642 int iwlagn_rate_control_register(void)
2644 return ieee80211_rate_control_register(&rs_ops);
2647 void iwlagn_rate_control_unregister(void)
2649 ieee80211_rate_control_unregister(&rs_ops);