[PATCH] USB: unusual_devs entry for Lyra RCA RD1080
[linux-2.6] / drivers / usb / host / ohci-s3c2410.c
1 /*
2  * OHCI HCD (Host Controller Driver) for USB.
3  *
4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
6  * (C) Copyright 2002 Hewlett-Packard Company
7  *
8  * USB Bus Glue for Samsung S3C2410
9  *
10  * Written by Christopher Hoover <ch@hpl.hp.com>
11  * Based on fragments of previous driver by Rusell King et al.
12  *
13  * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c
14  *      by Ben Dooks, <ben@simtec.co.uk>
15  *      Copyright (C) 2004 Simtec Electronics
16  *
17  * Thanks to basprog@mail.ru for updates to newer kernels
18  *
19  * This file is licenced under the GPL.
20 */
21
22 #include <linux/platform_device.h>
23 #include <linux/clk.h>
24
25 #include <asm/hardware.h>
26 #include <asm/arch/usb-control.h>
27
28 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
29
30 /* clock device associated with the hcd */
31
32 static struct clk *clk;
33
34 /* forward definitions */
35
36 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
37
38 /* conversion functions */
39
40 struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
41 {
42         return hcd->self.controller->platform_data;
43 }
44
45 static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
46 {
47         struct s3c2410_hcd_info *info = dev->dev.platform_data;
48
49         dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
50         clk_enable(clk);
51
52         if (info != NULL) {
53                 info->hcd       = hcd;
54                 info->report_oc = s3c2410_hcd_oc;
55
56                 if (info->enable_oc != NULL) {
57                         (info->enable_oc)(info, 1);
58                 }
59         }
60 }
61
62 static void s3c2410_stop_hc(struct platform_device *dev)
63 {
64         struct s3c2410_hcd_info *info = dev->dev.platform_data;
65
66         dev_dbg(&dev->dev, "s3c2410_stop_hc:\n");
67
68         if (info != NULL) {
69                 info->report_oc = NULL;
70                 info->hcd       = NULL;
71
72                 if (info->enable_oc != NULL) {
73                         (info->enable_oc)(info, 0);
74                 }
75         }
76
77         clk_disable(clk);
78 }
79
80 /* ohci_s3c2410_hub_status_data
81  *
82  * update the status data from the hub with anything that
83  * has been detected by our system
84 */
85
86 static int
87 ohci_s3c2410_hub_status_data (struct usb_hcd *hcd, char *buf)
88 {
89         struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
90         struct s3c2410_hcd_port *port;
91         int orig;
92         int portno;
93
94         orig  = ohci_hub_status_data (hcd, buf);
95
96         if (info == NULL)
97                 return orig;
98
99         port = &info->port[0];
100
101         /* mark any changed port as changed */
102
103         for (portno = 0; portno < 2; port++, portno++) {
104                 if (port->oc_changed == 1 &&
105                     port->flags & S3C_HCDFLG_USED) {
106                         dev_dbg(hcd->self.controller,
107                                 "oc change on port %d\n", portno);
108
109                         if (orig < 1)
110                                 orig = 1;
111
112                         buf[0] |= 1<<(portno+1);
113                 }
114         }
115
116         return orig;
117 }
118
119 /* s3c2410_usb_set_power
120  *
121  * configure the power on a port, by calling the platform device
122  * routine registered with the platform device
123 */
124
125 static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info,
126                                   int port, int to)
127 {
128         if (info == NULL)
129                 return;
130
131         if (info->power_control != NULL) {
132                 info->port[port-1].power = to;
133                 (info->power_control)(port-1, to);
134         }
135 }
136
137 /* ohci_s3c2410_hub_control
138  *
139  * look at control requests to the hub, and see if we need
140  * to take any action or over-ride the results from the
141  * request.
142 */
143
144 static int ohci_s3c2410_hub_control (
145         struct usb_hcd  *hcd,
146         u16             typeReq,
147         u16             wValue,
148         u16             wIndex,
149         char            *buf,
150         u16             wLength)
151 {
152         struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
153         struct usb_hub_descriptor *desc;
154         int ret = -EINVAL;
155         u32 *data = (u32 *)buf;
156
157         dev_dbg(hcd->self.controller,
158                 "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
159                 hcd, typeReq, wValue, wIndex, buf, wLength);
160
161         /* if we are only an humble host without any special capabilites
162          * process the request straight away and exit */
163
164         if (info == NULL) {
165                 ret = ohci_hub_control(hcd, typeReq, wValue,
166                                        wIndex, buf, wLength);
167                 goto out;
168         }
169
170         /* check the request to see if it needs handling */
171
172         switch (typeReq) {
173         case SetPortFeature:
174                 if (wValue == USB_PORT_FEAT_POWER) {
175                         dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
176                         s3c2410_usb_set_power(info, wIndex, 1);
177                         goto out;
178                 }
179                 break;
180
181         case ClearPortFeature:
182                 switch (wValue) {
183                 case USB_PORT_FEAT_C_OVER_CURRENT:
184                         dev_dbg(hcd->self.controller,
185                                 "ClearPortFeature: C_OVER_CURRENT\n");
186
187                         if (valid_port(wIndex)) {
188                                 info->port[wIndex-1].oc_changed = 0;
189                                 info->port[wIndex-1].oc_status = 0;
190                         }
191
192                         goto out;
193
194                 case USB_PORT_FEAT_OVER_CURRENT:
195                         dev_dbg(hcd->self.controller,
196                                 "ClearPortFeature: OVER_CURRENT\n");
197
198                         if (valid_port(wIndex)) {
199                                 info->port[wIndex-1].oc_status = 0;
200                         }
201
202                         goto out;
203
204                 case USB_PORT_FEAT_POWER:
205                         dev_dbg(hcd->self.controller,
206                                 "ClearPortFeature: POWER\n");
207
208                         if (valid_port(wIndex)) {
209                                 s3c2410_usb_set_power(info, wIndex, 0);
210                                 return 0;
211                         }
212                 }
213                 break;
214         }
215
216         ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
217         if (ret)
218                 goto out;
219
220         switch (typeReq) {
221         case GetHubDescriptor:
222
223                 /* update the hub's descriptor */
224
225                 desc = (struct usb_hub_descriptor *)buf;
226
227                 if (info->power_control == NULL)
228                         return ret;
229
230                 dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
231                         desc->wHubCharacteristics);
232
233                 /* remove the old configurations for power-switching, and
234                  * over-current protection, and insert our new configuration
235                  */
236
237                 desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
238                 desc->wHubCharacteristics |= cpu_to_le16(0x0001);
239
240                 if (info->enable_oc) {
241                         desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
242                         desc->wHubCharacteristics |=  cpu_to_le16(0x0008|0x0001);
243                 }
244
245                 dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
246                         desc->wHubCharacteristics);
247
248                 return ret;
249
250         case GetPortStatus:
251                 /* check port status */
252
253                 dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
254
255                 if (valid_port(wIndex)) {
256                         if (info->port[wIndex-1].oc_changed) {
257                                 *data |= cpu_to_le32(RH_PS_OCIC);
258                         }
259
260                         if (info->port[wIndex-1].oc_status) {
261                                 *data |= cpu_to_le32(RH_PS_POCI);
262                         }
263                 }
264         }
265
266  out:
267         return ret;
268 }
269
270 /* s3c2410_hcd_oc
271  *
272  * handle an over-current report
273 */
274
275 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
276 {
277         struct s3c2410_hcd_port *port;
278         struct usb_hcd *hcd;
279         unsigned long flags;
280         int portno;
281
282         if (info == NULL)
283                 return;
284
285         port = &info->port[0];
286         hcd = info->hcd;
287
288         local_irq_save(flags);
289
290         for (portno = 0; portno < 2; port++, portno++) {
291                 if (port_oc & (1<<portno) &&
292                     port->flags & S3C_HCDFLG_USED) {
293                         port->oc_status = 1;
294                         port->oc_changed = 1;
295
296                         /* ok, once over-current is detected,
297                            the port needs to be powered down */
298                         s3c2410_usb_set_power(info, portno+1, 0);
299                 }
300         }
301
302         local_irq_restore(flags);
303 }
304
305 /* may be called without controller electrically present */
306 /* may be called with controller, bus, and devices active */
307
308 /*
309  * usb_hcd_s3c2410_remove - shutdown processing for HCD
310  * @dev: USB Host Controller being removed
311  * Context: !in_interrupt()
312  *
313  * Reverses the effect of usb_hcd_3c2410_probe(), first invoking
314  * the HCD's stop() method.  It is always called from a thread
315  * context, normally "rmmod", "apmd", or something similar.
316  *
317 */
318
319 void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
320 {
321         usb_remove_hcd(hcd);
322         s3c2410_stop_hc(dev);
323         iounmap(hcd->regs);
324         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
325         usb_put_hcd(hcd);
326 }
327
328 /**
329  * usb_hcd_s3c2410_probe - initialize S3C2410-based HCDs
330  * Context: !in_interrupt()
331  *
332  * Allocates basic resources for this USB host controller, and
333  * then invokes the start() method for the HCD associated with it
334  * through the hotplug entry's driver_data.
335  *
336  */
337 int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
338                            struct platform_device *dev)
339 {
340         struct usb_hcd *hcd = NULL;
341         int retval;
342
343         s3c2410_usb_set_power(dev->dev.platform_data, 1, 1);
344         s3c2410_usb_set_power(dev->dev.platform_data, 2, 1);
345
346         hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx");
347         if (hcd == NULL)
348                 return -ENOMEM;
349
350         hcd->rsrc_start = dev->resource[0].start;
351         hcd->rsrc_len   = dev->resource[0].end - dev->resource[0].start + 1;
352
353         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
354                 dev_err(&dev->dev, "request_mem_region failed");
355                 retval = -EBUSY;
356                 goto err0;
357         }
358
359         clk = clk_get(NULL, "usb-host");
360         if (IS_ERR(clk)) {
361                 dev_err(&dev->dev, "cannot get usb-host clock\n");
362                 retval = -ENOENT;
363                 goto err1;
364         }
365
366         s3c2410_start_hc(dev, hcd);
367
368         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
369         if (!hcd->regs) {
370                 dev_err(&dev->dev, "ioremap failed\n");
371                 retval = -ENOMEM;
372                 goto err2;
373         }
374
375         ohci_hcd_init(hcd_to_ohci(hcd));
376
377         retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
378         if (retval != 0)
379                 goto err2;
380
381         return 0;
382
383  err2:
384         s3c2410_stop_hc(dev);
385         iounmap(hcd->regs);
386         clk_put(clk);
387
388  err1:
389         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
390
391  err0:
392         usb_put_hcd(hcd);
393         return retval;
394 }
395
396 /*-------------------------------------------------------------------------*/
397
398 static int
399 ohci_s3c2410_start (struct usb_hcd *hcd)
400 {
401         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
402         int ret;
403
404         if ((ret = ohci_init(ohci)) < 0)
405                 return ret;
406
407         if ((ret = ohci_run (ohci)) < 0) {
408                 err ("can't start %s", hcd->self.bus_name);
409                 ohci_stop (hcd);
410                 return ret;
411         }
412
413         return 0;
414 }
415
416
417 static const struct hc_driver ohci_s3c2410_hc_driver = {
418         .description =          hcd_name,
419         .product_desc =         "S3C24XX OHCI",
420         .hcd_priv_size =        sizeof(struct ohci_hcd),
421
422         /*
423          * generic hardware linkage
424          */
425         .irq =                  ohci_irq,
426         .flags =                HCD_USB11 | HCD_MEMORY,
427
428         /*
429          * basic lifecycle operations
430          */
431         .start =                ohci_s3c2410_start,
432         .stop =                 ohci_stop,
433
434         /*
435          * managing i/o requests and associated device resources
436          */
437         .urb_enqueue =          ohci_urb_enqueue,
438         .urb_dequeue =          ohci_urb_dequeue,
439         .endpoint_disable =     ohci_endpoint_disable,
440
441         /*
442          * scheduling support
443          */
444         .get_frame_number =     ohci_get_frame,
445
446         /*
447          * root hub support
448          */
449         .hub_status_data =      ohci_s3c2410_hub_status_data,
450         .hub_control =          ohci_s3c2410_hub_control,
451 #ifdef  CONFIG_PM
452         .bus_suspend =          ohci_bus_suspend,
453         .bus_resume =           ohci_bus_resume,
454 #endif
455         .start_port_reset =     ohci_start_port_reset,
456 };
457
458 /* device driver */
459
460 static int ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev)
461 {
462         return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev);
463 }
464
465 static int ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev)
466 {
467         struct usb_hcd *hcd = platform_get_drvdata(pdev);
468
469         usb_hcd_s3c2410_remove(hcd, pdev);
470         return 0;
471 }
472
473 static struct platform_driver ohci_hcd_s3c2410_driver = {
474         .probe          = ohci_hcd_s3c2410_drv_probe,
475         .remove         = ohci_hcd_s3c2410_drv_remove,
476         /*.suspend      = ohci_hcd_s3c2410_drv_suspend, */
477         /*.resume       = ohci_hcd_s3c2410_drv_resume, */
478         .driver         = {
479                 .owner  = THIS_MODULE,
480                 .name   = "s3c2410-ohci",
481         },
482 };
483
484 static int __init ohci_hcd_s3c2410_init (void)
485 {
486         return platform_driver_register(&ohci_hcd_s3c2410_driver);
487 }
488
489 static void __exit ohci_hcd_s3c2410_cleanup (void)
490 {
491         platform_driver_unregister(&ohci_hcd_s3c2410_driver);
492 }
493
494 module_init (ohci_hcd_s3c2410_init);
495 module_exit (ohci_hcd_s3c2410_cleanup);