git.oblomov.eu Git - linux-2.6/blob - drivers/staging/line6/control.h

   1 /*
   2  * Line6 Linux USB driver - 0.8.0
   3  *
   4  * Copyright (C) 2004-2009 Markus Grabner (grabner@icg.tugraz.at)
   5  *
   6  *      This program is free software; you can redistribute it and/or
   7  *      modify it under the terms of the GNU General Public License as
   8  *      published by the Free Software Foundation, version 2.
   9  *
  10  */
  11
  12 #ifndef LINE6_CONTROL_H
  13 #define LINE6_CONTROL_H
  14
  15
  16 /**
  17    List of PODxt Pro controls.
  18    See Appendix C of the "PODxt (Pro) Pilot's Handbook" by Line6.
  19    Comments after the number refer to the PODxt Pro firmware version required
  20    for this feature.
  21 */
  22 enum {
  23         POD_tweak                          =   1,
  24         POD_wah_position                   =   4,
  25         POD_compression_gain               =   5,  /* device: LINE6_BITS_PODXTALL */
  26         POD_vol_pedal_position             =   7,
  27         POD_compression_threshold          =   9,
  28         POD_pan                            =  10,
  29         POD_amp_model_setup                =  11,
  30         POD_amp_model                      =  12,  /* firmware: 2.0 */
  31         POD_drive                          =  13,
  32         POD_bass                           =  14,
  33         POD_mid                            =  15,  /* device: LINE6_BITS_PODXTALL */
  34         POD_lowmid                         =  15,  /* device: LINE6_BITS_BASSPODXTALL */
  35         POD_treble                         =  16,  /* device: LINE6_BITS_PODXTALL */
  36         POD_highmid                        =  16,  /* device: LINE6_BITS_BASSPODXTALL */
  37         POD_chan_vol                       =  17,
  38         POD_reverb_mix                     =  18,  /* device: LINE6_BITS_PODXTALL */
  39         POD_effect_setup                   =  19,
  40         POD_band_1_frequency               =  20,  /* firmware: 2.0 */
  41         POD_presence                       =  21,  /* device: LINE6_BITS_PODXTALL */
  42         POD_treble__bass                   =  21,  /* device: LINE6_BITS_BASSPODXTALL */
  43         POD_noise_gate_enable              =  22,
  44         POD_gate_threshold                 =  23,
  45         POD_gate_decay_time                =  24,
  46         POD_stomp_enable                   =  25,
  47         POD_comp_enable                    =  26,
  48         POD_stomp_time                     =  27,
  49         POD_delay_enable                   =  28,
  50         POD_mod_param_1                    =  29,
  51         POD_delay_param_1                  =  30,
  52         POD_delay_param_1_note_value       =  31,
  53         POD_band_2_frequency__bass         =  32,  /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
  54         POD_delay_param_2                  =  33,
  55         POD_delay_volume_mix               =  34,
  56         POD_delay_param_3                  =  35,
  57         POD_reverb_enable                  =  36,  /* device: LINE6_BITS_PODXTALL */
  58         POD_reverb_type                    =  37,  /* device: LINE6_BITS_PODXTALL */
  59         POD_reverb_decay                   =  38,  /* device: LINE6_BITS_PODXTALL */
  60         POD_reverb_tone                    =  39,  /* device: LINE6_BITS_PODXTALL */
  61         POD_reverb_pre_delay               =  40,  /* device: LINE6_BITS_PODXTALL */
  62         POD_reverb_pre_post                =  41,  /* device: LINE6_BITS_PODXTALL */
  63         POD_band_2_frequency               =  42,  /* device: LINE6_BITS_PODXTALL */     /* firmware: 2.0 */
  64         POD_band_3_frequency__bass         =  42,  /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
  65         POD_wah_enable                     =  43,
  66         POD_modulation_lo_cut              =  44,  /* device: LINE6_BITS_BASSPODXTALL */
  67         POD_delay_reverb_lo_cut            =  45,  /* device: LINE6_BITS_BASSPODXTALL */
  68         POD_volume_pedal_minimum           =  46,  /* device: LINE6_BITS_PODXTALL */     /* firmware: 2.0 */
  69         POD_eq_pre_post                    =  46,  /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
  70         POD_volume_pre_post                =  47,
  71         POD_di_model                       =  48,  /* device: LINE6_BITS_BASSPODXTALL */
  72         POD_di_delay                       =  49,  /* device: LINE6_BITS_BASSPODXTALL */
  73         POD_mod_enable                     =  50,
  74         POD_mod_param_1_note_value         =  51,
  75         POD_mod_param_2                    =  52,
  76         POD_mod_param_3                    =  53,
  77         POD_mod_param_4                    =  54,
  78         POD_mod_param_5                    =  55,  /* device: LINE6_BITS_BASSPODXTALL */
  79         POD_mod_volume_mix                 =  56,
  80         POD_mod_pre_post                   =  57,
  81         POD_modulation_model               =  58,
  82         POD_band_3_frequency               =  60,  /* device: LINE6_BITS_PODXTALL */     /* firmware: 2.0 */
  83         POD_band_4_frequency__bass         =  60,  /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
  84         POD_mod_param_1_double_precision   =  61,
  85         POD_delay_param_1_double_precision =  62,
  86         POD_eq_enable                      =  63,  /* firmware: 2.0 */
  87         POD_tap                            =  64,
  88         POD_volume_tweak_pedal_assign      =  65,
  89         POD_band_5_frequency               =  68,  /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
  90         POD_tuner                          =  69,
  91         POD_mic_selection                  =  70,
  92         POD_cabinet_model                  =  71,
  93         POD_stomp_model                    =  75,
  94         POD_roomlevel                      =  76,
  95         POD_band_4_frequency               =  77,  /* device: LINE6_BITS_PODXTALL */     /* firmware: 2.0 */
  96         POD_band_6_frequency               =  77,  /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
  97         POD_stomp_param_1_note_value       =  78,
  98         POD_stomp_param_2                  =  79,
  99         POD_stomp_param_3                  =  80,
 100         POD_stomp_param_4                  =  81,
 101         POD_stomp_param_5                  =  82,
 102         POD_stomp_param_6                  =  83,
 103         POD_amp_switch_select              =  84,  /* device: LINE6_BITS_LIVE */
 104         POD_delay_param_4                  =  85,
 105         POD_delay_param_5                  =  86,
 106         POD_delay_pre_post                 =  87,
 107         POD_delay_model                    =  88,  /* device: LINE6_BITS_PODXTALL */
 108         POD_delay_verb_model               =  88,  /* device: LINE6_BITS_BASSPODXTALL */
 109         POD_tempo_msb                      =  89,
 110         POD_tempo_lsb                      =  90,
 111         POD_wah_model                      =  91,  /* firmware: 3.0 */
 112         POD_bypass_volume                  = 105,  /* firmware: 2.14 */
 113         POD_fx_loop_on_off                 = 107,  /* device: LINE6_BITS_PRO */
 114         POD_tweak_param_select             = 108,
 115         POD_amp1_engage                    = 111,
 116         POD_band_1_gain                    = 114,  /* firmware: 2.0 */
 117         POD_band_2_gain__bass              = 115,  /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
 118         POD_band_2_gain                    = 116,  /* device: LINE6_BITS_PODXTALL */     /* firmware: 2.0 */
 119         POD_band_3_gain__bass              = 116,  /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
 120         POD_band_3_gain                    = 117,  /* device: LINE6_BITS_PODXTALL */     /* firmware: 2.0 */
 121         POD_band_4_gain__bass              = 117,  /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
 122         POD_band_5_gain__bass              = 118,  /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
 123         POD_band_4_gain                    = 119,  /* device: LINE6_BITS_PODXTALL */     /* firmware: 2.0 */
 124         POD_band_6_gain__bass              = 119   /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
 125 };
 126
 127 /**
 128    List of Variax workbench controls (dump).
 129 */
 130 enum {
 131         VARIAX_body                        =   3,
 132         VARIAX_pickup1_enable              =   4,  /* 0: enabled, 1: disabled */
 133         VARIAX_pickup1_type                =   8,
 134         VARIAX_pickup1_position            =   9,  /* type: 24 bit float */
 135         VARIAX_pickup1_angle               =  12,  /* type: 24 bit float */
 136         VARIAX_pickup1_level               =  15,  /* type: 24 bit float */
 137         VARIAX_pickup2_enable              =  18,  /* 0: enabled, 1: disabled */
 138         VARIAX_pickup2_type                =  22,
 139         VARIAX_pickup2_position            =  23,  /* type: 24 bit float */
 140         VARIAX_pickup2_angle               =  26,  /* type: 24 bit float */
 141         VARIAX_pickup2_level               =  29,  /* type: 24 bit float */
 142         VARIAX_pickup_phase                =  32,  /* 0: in phase, 1: out of phase */
 143         VARIAX_capacitance                 =  33,  /* type: 24 bit float */
 144         VARIAX_tone_resistance             =  36,  /* type: 24 bit float */
 145         VARIAX_volume_resistance           =  39,  /* type: 24 bit float */
 146         VARIAX_taper                       =  42,  /* 0: Linear, 1: Audio */
 147         VARIAX_tone_dump                   =  43,  /* type: 24 bit float */
 148         VARIAX_save_tone                   =  46,
 149         VARIAX_volume_dump                 =  47,  /* type: 24 bit float */
 150         VARIAX_tuning_enable               =  50,
 151         VARIAX_tuning6                     =  51,
 152         VARIAX_tuning5                     =  52,
 153         VARIAX_tuning4                     =  53,
 154         VARIAX_tuning3                     =  54,
 155         VARIAX_tuning2                     =  55,
 156         VARIAX_tuning1                     =  56,
 157         VARIAX_detune6                     =  57,  /* type: 24 bit float */
 158         VARIAX_detune5                     =  60,  /* type: 24 bit float */
 159         VARIAX_detune4                     =  63,  /* type: 24 bit float */
 160         VARIAX_detune3                     =  66,  /* type: 24 bit float */
 161         VARIAX_detune2                     =  69,  /* type: 24 bit float */
 162         VARIAX_detune1                     =  72,  /* type: 24 bit float */
 163         VARIAX_mix6                        =  75,  /* type: 24 bit float */
 164         VARIAX_mix5                        =  78,  /* type: 24 bit float */
 165         VARIAX_mix4                        =  81,  /* type: 24 bit float */
 166         VARIAX_mix3                        =  84,  /* type: 24 bit float */
 167         VARIAX_mix2                        =  87,  /* type: 24 bit float */
 168         VARIAX_mix1                        =  90,  /* type: 24 bit float */
 169         VARIAX_pickup_wiring               =  96   /* 0: parallel, 1: series */
 170 };
 171
 172 /**
 173    List of Variax workbench controls (MIDI).
 174 */
 175 enum {
 176         VARIAXMIDI_volume                  =   7,
 177         VARIAXMIDI_tone                    =  79,
 178 };
 179
 180
 181 extern int pod_create_files(int firmware, int type, struct device *dev);
 182 extern void pod_remove_files(int firmware, int type, struct device *dev);
 183 extern int variax_create_files(int firmware, int type, struct device *dev);
 184 extern void variax_remove_files(int firmware, int type, struct device *dev);
 185
 186
 187 #endif