git.oblomov.eu Git - linux-2.6/blob - drivers/pci/hotplug/ibmphp_hpc.c

   1 /*
   2  * IBM Hot Plug Controller Driver
   3  *
   4  * Written By: Jyoti Shah, IBM Corporation
   5  *
   6  * Copyright (C) 2001-2003 IBM Corp.
   7  *
   8  * All rights reserved.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or (at
  13  * your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful, but
  16  * WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  18  * NON INFRINGEMENT.  See the GNU General Public License for more
  19  * details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  24  *
  25  * Send feedback to <gregkh@us.ibm.com>
  26  *                  <jshah@us.ibm.com>
  27  *
  28  */
  29
  30 #include <linux/wait.h>
  31 #include <linux/time.h>
  32 #include <linux/delay.h>
  33 #include <linux/module.h>
  34 #include <linux/pci.h>
  35 #include <linux/smp_lock.h>
  36 #include <linux/init.h>
  37 #include <linux/mutex.h>
  38
  39 #include "ibmphp.h"
  40
  41 static int to_debug = 0;
  42 #define debug_polling(fmt, arg...)      do { if (to_debug) debug (fmt, arg); } while (0)
  43
  44 //----------------------------------------------------------------------------
  45 // timeout values
  46 //----------------------------------------------------------------------------
  47 #define CMD_COMPLETE_TOUT_SEC   60      // give HPC 60 sec to finish cmd
  48 #define HPC_CTLR_WORKING_TOUT   60      // give HPC 60 sec to finish cmd
  49 #define HPC_GETACCESS_TIMEOUT   60      // seconds
  50 #define POLL_INTERVAL_SEC       2       // poll HPC every 2 seconds
  51 #define POLL_LATCH_CNT          5       // poll latch 5 times, then poll slots
  52
  53 //----------------------------------------------------------------------------
  54 // Winnipeg Architected Register Offsets
  55 //----------------------------------------------------------------------------
  56 #define WPG_I2CMBUFL_OFFSET     0x08    // I2C Message Buffer Low
  57 #define WPG_I2CMOSUP_OFFSET     0x10    // I2C Master Operation Setup Reg
  58 #define WPG_I2CMCNTL_OFFSET     0x20    // I2C Master Control Register
  59 #define WPG_I2CPARM_OFFSET      0x40    // I2C Parameter Register
  60 #define WPG_I2CSTAT_OFFSET      0x70    // I2C Status Register
  61
  62 //----------------------------------------------------------------------------
  63 // Winnipeg Store Type commands (Add this commands to the register offset)
  64 //----------------------------------------------------------------------------
  65 #define WPG_I2C_AND             0x1000  // I2C AND operation
  66 #define WPG_I2C_OR              0x2000  // I2C OR operation
  67
  68 //----------------------------------------------------------------------------
  69 // Command set for I2C Master Operation Setup Register
  70 //----------------------------------------------------------------------------
  71 #define WPG_READATADDR_MASK     0x00010000      // read,bytes,I2C shifted,index
  72 #define WPG_WRITEATADDR_MASK    0x40010000      // write,bytes,I2C shifted,index
  73 #define WPG_READDIRECT_MASK     0x10010000
  74 #define WPG_WRITEDIRECT_MASK    0x60010000
  75
  76
  77 //----------------------------------------------------------------------------
  78 // bit masks for I2C Master Control Register
  79 //----------------------------------------------------------------------------
  80 #define WPG_I2CMCNTL_STARTOP_MASK       0x00000002      // Start the Operation
  81
  82 //----------------------------------------------------------------------------
  83 //
  84 //----------------------------------------------------------------------------
  85 #define WPG_I2C_IOREMAP_SIZE    0x2044  // size of linear address interval
  86
  87 //----------------------------------------------------------------------------
  88 // command index
  89 //----------------------------------------------------------------------------
  90 #define WPG_1ST_SLOT_INDEX      0x01    // index - 1st slot for ctlr
  91 #define WPG_CTLR_INDEX          0x0F    // index - ctlr
  92 #define WPG_1ST_EXTSLOT_INDEX   0x10    // index - 1st ext slot for ctlr
  93 #define WPG_1ST_BUS_INDEX       0x1F    // index - 1st bus for ctlr
  94
  95 //----------------------------------------------------------------------------
  96 // macro utilities
  97 //----------------------------------------------------------------------------
  98 // if bits 20,22,25,26,27,29,30 are OFF return 1
  99 #define HPC_I2CSTATUS_CHECK(s)  ((u8)((s & 0x00000A76) ? 0 : 1))
 100
 101 //----------------------------------------------------------------------------
 102 // global variables
 103 //----------------------------------------------------------------------------
 104 static int ibmphp_shutdown;
 105 static int tid_poll;
 106 static struct mutex sem_hpcaccess;      // lock access to HPC
 107 static struct semaphore semOperations;  // lock all operations and
 108                                         // access to data structures
 109 static struct semaphore sem_exit;       // make sure polling thread goes away
 110 //----------------------------------------------------------------------------
 111 // local function prototypes
 112 //----------------------------------------------------------------------------
 113 static u8 i2c_ctrl_read (struct controller *, void __iomem *, u8);
 114 static u8 i2c_ctrl_write (struct controller *, void __iomem *, u8, u8);
 115 static u8 hpc_writecmdtoindex (u8, u8);
 116 static u8 hpc_readcmdtoindex (u8, u8);
 117 static void get_hpc_access (void);
 118 static void free_hpc_access (void);
 119 static void poll_hpc (void);
 120 static int process_changeinstatus (struct slot *, struct slot *);
 121 static int process_changeinlatch (u8, u8, struct controller *);
 122 static int hpc_poll_thread (void *);
 123 static int hpc_wait_ctlr_notworking (int, struct controller *, void __iomem *, u8 *);
 124 //----------------------------------------------------------------------------
 125
 126
 127 /*----------------------------------------------------------------------
 128 * Name:    ibmphp_hpc_initvars
 129 *
 130 * Action:  initialize semaphores and variables
 131 *---------------------------------------------------------------------*/
 132 void __init ibmphp_hpc_initvars (void)
 133 {
 134         debug ("%s - Entry\n", __FUNCTION__);
 135
 136         mutex_init(&sem_hpcaccess);
 137         init_MUTEX (&semOperations);
 138         init_MUTEX_LOCKED (&sem_exit);
 139         to_debug = 0;
 140         ibmphp_shutdown = 0;
 141         tid_poll = 0;
 142
 143         debug ("%s - Exit\n", __FUNCTION__);
 144 }
 145
 146 /*----------------------------------------------------------------------
 147 * Name:    i2c_ctrl_read
 148 *
 149 * Action:  read from HPC over I2C
 150 *
 151 *---------------------------------------------------------------------*/
 152 static u8 i2c_ctrl_read (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index)
 153 {
 154         u8 status;
 155         int i;
 156         void __iomem *wpg_addr; // base addr + offset
 157         unsigned long wpg_data; // data to/from WPG LOHI format
 158         unsigned long ultemp;
 159         unsigned long data;     // actual data HILO format
 160
 161         debug_polling ("%s - Entry WPGBbar[%p] index[%x] \n", __FUNCTION__, WPGBbar, index);
 162
 163         //--------------------------------------------------------------------
 164         // READ - step 1
 165         // read at address, byte length, I2C address (shifted), index
 166         // or read direct, byte length, index
 167         if (ctlr_ptr->ctlr_type == 0x02) {
 168                 data = WPG_READATADDR_MASK;
 169                 // fill in I2C address
 170                 ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
 171                 ultemp = ultemp >> 1;
 172                 data |= (ultemp << 8);
 173
 174                 // fill in index
 175                 data |= (unsigned long)index;
 176         } else if (ctlr_ptr->ctlr_type == 0x04) {
 177                 data = WPG_READDIRECT_MASK;
 178
 179                 // fill in index
 180                 ultemp = (unsigned long)index;
 181                 ultemp = ultemp << 8;
 182                 data |= ultemp;
 183         } else {
 184                 err ("this controller type is not supported \n");
 185                 return HPC_ERROR;
 186         }
 187
 188         wpg_data = swab32 (data);       // swap data before writing
 189         wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
 190         writel (wpg_data, wpg_addr);
 191
 192         //--------------------------------------------------------------------
 193         // READ - step 2 : clear the message buffer
 194         data = 0x00000000;
 195         wpg_data = swab32 (data);
 196         wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
 197         writel (wpg_data, wpg_addr);
 198
 199         //--------------------------------------------------------------------
 200         // READ - step 3 : issue start operation, I2C master control bit 30:ON
 201         //                 2020 : [20] OR operation at [20] offset 0x20
 202         data = WPG_I2CMCNTL_STARTOP_MASK;
 203         wpg_data = swab32 (data);
 204         wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
 205         writel (wpg_data, wpg_addr);
 206
 207         //--------------------------------------------------------------------
 208         // READ - step 4 : wait until start operation bit clears
 209         i = CMD_COMPLETE_TOUT_SEC;
 210         while (i) {
 211                 msleep(10);
 212                 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
 213                 wpg_data = readl (wpg_addr);
 214                 data = swab32 (wpg_data);
 215                 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
 216                         break;
 217                 i--;
 218         }
 219         if (i == 0) {
 220                 debug ("%s - Error : WPG timeout\n", __FUNCTION__);
 221                 return HPC_ERROR;
 222         }
 223         //--------------------------------------------------------------------
 224         // READ - step 5 : read I2C status register
 225         i = CMD_COMPLETE_TOUT_SEC;
 226         while (i) {
 227                 msleep(10);
 228                 wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
 229                 wpg_data = readl (wpg_addr);
 230                 data = swab32 (wpg_data);
 231                 if (HPC_I2CSTATUS_CHECK (data))
 232                         break;
 233                 i--;
 234         }
 235         if (i == 0) {
 236                 debug ("ctrl_read - Exit Error:I2C timeout\n");
 237                 return HPC_ERROR;
 238         }
 239
 240         //--------------------------------------------------------------------
 241         // READ - step 6 : get DATA
 242         wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
 243         wpg_data = readl (wpg_addr);
 244         data = swab32 (wpg_data);
 245
 246         status = (u8) data;
 247
 248         debug_polling ("%s - Exit index[%x] status[%x]\n", __FUNCTION__, index, status);
 249
 250         return (status);
 251 }
 252
 253 /*----------------------------------------------------------------------
 254 * Name:    i2c_ctrl_write
 255 *
 256 * Action:  write to HPC over I2C
 257 *
 258 * Return   0 or error codes
 259 *---------------------------------------------------------------------*/
 260 static u8 i2c_ctrl_write (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index, u8 cmd)
 261 {
 262         u8 rc;
 263         void __iomem *wpg_addr; // base addr + offset
 264         unsigned long wpg_data; // data to/from WPG LOHI format
 265         unsigned long ultemp;
 266         unsigned long data;     // actual data HILO format
 267         int i;
 268
 269         debug_polling ("%s - Entry WPGBbar[%p] index[%x] cmd[%x]\n", __FUNCTION__, WPGBbar, index, cmd);
 270
 271         rc = 0;
 272         //--------------------------------------------------------------------
 273         // WRITE - step 1
 274         // write at address, byte length, I2C address (shifted), index
 275         // or write direct, byte length, index
 276         data = 0x00000000;
 277
 278         if (ctlr_ptr->ctlr_type == 0x02) {
 279                 data = WPG_WRITEATADDR_MASK;
 280                 // fill in I2C address
 281                 ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
 282                 ultemp = ultemp >> 1;
 283                 data |= (ultemp << 8);
 284
 285                 // fill in index
 286                 data |= (unsigned long)index;
 287         } else if (ctlr_ptr->ctlr_type == 0x04) {
 288                 data = WPG_WRITEDIRECT_MASK;
 289
 290                 // fill in index
 291                 ultemp = (unsigned long)index;
 292                 ultemp = ultemp << 8;
 293                 data |= ultemp;
 294         } else {
 295                 err ("this controller type is not supported \n");
 296                 return HPC_ERROR;
 297         }
 298
 299         wpg_data = swab32 (data);       // swap data before writing
 300         wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
 301         writel (wpg_data, wpg_addr);
 302
 303         //--------------------------------------------------------------------
 304         // WRITE - step 2 : clear the message buffer
 305         data = 0x00000000 | (unsigned long)cmd;
 306         wpg_data = swab32 (data);
 307         wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
 308         writel (wpg_data, wpg_addr);
 309
 310         //--------------------------------------------------------------------
 311         // WRITE - step 3 : issue start operation,I2C master control bit 30:ON
 312         //                 2020 : [20] OR operation at [20] offset 0x20
 313         data = WPG_I2CMCNTL_STARTOP_MASK;
 314         wpg_data = swab32 (data);
 315         wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
 316         writel (wpg_data, wpg_addr);
 317
 318         //--------------------------------------------------------------------
 319         // WRITE - step 4 : wait until start operation bit clears
 320         i = CMD_COMPLETE_TOUT_SEC;
 321         while (i) {
 322                 msleep(10);
 323                 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
 324                 wpg_data = readl (wpg_addr);
 325                 data = swab32 (wpg_data);
 326                 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
 327                         break;
 328                 i--;
 329         }
 330         if (i == 0) {
 331                 debug ("%s - Exit Error:WPG timeout\n", __FUNCTION__);
 332                 rc = HPC_ERROR;
 333         }
 334
 335         //--------------------------------------------------------------------
 336         // WRITE - step 5 : read I2C status register
 337         i = CMD_COMPLETE_TOUT_SEC;
 338         while (i) {
 339                 msleep(10);
 340                 wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
 341                 wpg_data = readl (wpg_addr);
 342                 data = swab32 (wpg_data);
 343                 if (HPC_I2CSTATUS_CHECK (data))
 344                         break;
 345                 i--;
 346         }
 347         if (i == 0) {
 348                 debug ("ctrl_read - Error : I2C timeout\n");
 349                 rc = HPC_ERROR;
 350         }
 351
 352         debug_polling ("%s Exit rc[%x]\n", __FUNCTION__, rc);
 353         return (rc);
 354 }
 355
 356 //------------------------------------------------------------
 357 //  Read from ISA type HPC
 358 //------------------------------------------------------------
 359 static u8 isa_ctrl_read (struct controller *ctlr_ptr, u8 offset)
 360 {
 361         u16 start_address;
 362         u16 end_address;
 363         u8 data;
 364
 365         start_address = ctlr_ptr->u.isa_ctlr.io_start;
 366         end_address = ctlr_ptr->u.isa_ctlr.io_end;
 367         data = inb (start_address + offset);
 368         return data;
 369 }
 370
 371 //--------------------------------------------------------------
 372 // Write to ISA type HPC
 373 //--------------------------------------------------------------
 374 static void isa_ctrl_write (struct controller *ctlr_ptr, u8 offset, u8 data)
 375 {
 376         u16 start_address;
 377         u16 port_address;
 378
 379         start_address = ctlr_ptr->u.isa_ctlr.io_start;
 380         port_address = start_address + (u16) offset;
 381         outb (data, port_address);
 382 }
 383
 384 static u8 pci_ctrl_read (struct controller *ctrl, u8 offset)
 385 {
 386         u8 data = 0x00;
 387         debug ("inside pci_ctrl_read\n");
 388         if (ctrl->ctrl_dev)
 389                 pci_read_config_byte (ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, &data);
 390         return data;
 391 }
 392
 393 static u8 pci_ctrl_write (struct controller *ctrl, u8 offset, u8 data)
 394 {
 395         u8 rc = -ENODEV;
 396         debug ("inside pci_ctrl_write\n");
 397         if (ctrl->ctrl_dev) {
 398                 pci_write_config_byte (ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, data);
 399                 rc = 0;
 400         }
 401         return rc;
 402 }
 403
 404 static u8 ctrl_read (struct controller *ctlr, void __iomem *base, u8 offset)
 405 {
 406         u8 rc;
 407         switch (ctlr->ctlr_type) {
 408         case 0:
 409                 rc = isa_ctrl_read (ctlr, offset);
 410                 break;
 411         case 1:
 412                 rc = pci_ctrl_read (ctlr, offset);
 413                 break;
 414         case 2:
 415         case 4:
 416                 rc = i2c_ctrl_read (ctlr, base, offset);
 417                 break;
 418         default:
 419                 return -ENODEV;
 420         }
 421         return rc;
 422 }
 423
 424 static u8 ctrl_write (struct controller *ctlr, void __iomem *base, u8 offset, u8 data)
 425 {
 426         u8 rc = 0;
 427         switch (ctlr->ctlr_type) {
 428         case 0:
 429                 isa_ctrl_write(ctlr, offset, data);
 430                 break;
 431         case 1:
 432                 rc = pci_ctrl_write (ctlr, offset, data);
 433                 break;
 434         case 2:
 435         case 4:
 436                 rc = i2c_ctrl_write(ctlr, base, offset, data);
 437                 break;
 438         default:
 439                 return -ENODEV;
 440         }
 441         return rc;
 442 }
 443 /*----------------------------------------------------------------------
 444 * Name:    hpc_writecmdtoindex()
 445 *
 446 * Action:  convert a write command to proper index within a controller
 447 *
 448 * Return   index, HPC_ERROR
 449 *---------------------------------------------------------------------*/
 450 static u8 hpc_writecmdtoindex (u8 cmd, u8 index)
 451 {
 452         u8 rc;
 453
 454         switch (cmd) {
 455         case HPC_CTLR_ENABLEIRQ:        // 0x00.N.15
 456         case HPC_CTLR_CLEARIRQ: // 0x06.N.15
 457         case HPC_CTLR_RESET:    // 0x07.N.15
 458         case HPC_CTLR_IRQSTEER: // 0x08.N.15
 459         case HPC_CTLR_DISABLEIRQ:       // 0x01.N.15
 460         case HPC_ALLSLOT_ON:    // 0x11.N.15
 461         case HPC_ALLSLOT_OFF:   // 0x12.N.15
 462                 rc = 0x0F;
 463                 break;
 464
 465         case HPC_SLOT_OFF:      // 0x02.Y.0-14
 466         case HPC_SLOT_ON:       // 0x03.Y.0-14
 467         case HPC_SLOT_ATTNOFF:  // 0x04.N.0-14
 468         case HPC_SLOT_ATTNON:   // 0x05.N.0-14
 469         case HPC_SLOT_BLINKLED: // 0x13.N.0-14
 470                 rc = index;
 471                 break;
 472
 473         case HPC_BUS_33CONVMODE:
 474         case HPC_BUS_66CONVMODE:
 475         case HPC_BUS_66PCIXMODE:
 476         case HPC_BUS_100PCIXMODE:
 477         case HPC_BUS_133PCIXMODE:
 478                 rc = index + WPG_1ST_BUS_INDEX - 1;
 479                 break;
 480
 481         default:
 482                 err ("hpc_writecmdtoindex - Error invalid cmd[%x]\n", cmd);
 483                 rc = HPC_ERROR;
 484         }
 485
 486         return rc;
 487 }
 488
 489 /*----------------------------------------------------------------------
 490 * Name:    hpc_readcmdtoindex()
 491 *
 492 * Action:  convert a read command to proper index within a controller
 493 *
 494 * Return   index, HPC_ERROR
 495 *---------------------------------------------------------------------*/
 496 static u8 hpc_readcmdtoindex (u8 cmd, u8 index)
 497 {
 498         u8 rc;
 499
 500         switch (cmd) {
 501         case READ_CTLRSTATUS:
 502                 rc = 0x0F;
 503                 break;
 504         case READ_SLOTSTATUS:
 505         case READ_ALLSTAT:
 506                 rc = index;
 507                 break;
 508         case READ_EXTSLOTSTATUS:
 509                 rc = index + WPG_1ST_EXTSLOT_INDEX;
 510                 break;
 511         case READ_BUSSTATUS:
 512                 rc = index + WPG_1ST_BUS_INDEX - 1;
 513                 break;
 514         case READ_SLOTLATCHLOWREG:
 515                 rc = 0x28;
 516                 break;
 517         case READ_REVLEVEL:
 518                 rc = 0x25;
 519                 break;
 520         case READ_HPCOPTIONS:
 521                 rc = 0x27;
 522                 break;
 523         default:
 524                 rc = HPC_ERROR;
 525         }
 526         return rc;
 527 }
 528
 529 /*----------------------------------------------------------------------
 530 * Name:    HPCreadslot()
 531 *
 532 * Action:  issue a READ command to HPC
 533 *
 534 * Input:   pslot   - cannot be NULL for READ_ALLSTAT
 535 *          pstatus - can be NULL for READ_ALLSTAT
 536 *
 537 * Return   0 or error codes
 538 *---------------------------------------------------------------------*/
 539 int ibmphp_hpc_readslot (struct slot * pslot, u8 cmd, u8 * pstatus)
 540 {
 541         void __iomem *wpg_bbar = NULL;
 542         struct controller *ctlr_ptr;
 543         struct list_head *pslotlist;
 544         u8 index, status;
 545         int rc = 0;
 546         int busindex;
 547
 548         debug_polling ("%s - Entry pslot[%p] cmd[%x] pstatus[%p]\n", __FUNCTION__, pslot, cmd, pstatus);
 549
 550         if ((pslot == NULL)
 551             || ((pstatus == NULL) && (cmd != READ_ALLSTAT) && (cmd != READ_BUSSTATUS))) {
 552                 rc = -EINVAL;
 553                 err ("%s - Error invalid pointer, rc[%d]\n", __FUNCTION__, rc);
 554                 return rc;
 555         }
 556
 557         if (cmd == READ_BUSSTATUS) {
 558                 busindex = ibmphp_get_bus_index (pslot->bus);
 559                 if (busindex < 0) {
 560                         rc = -EINVAL;
 561                         err ("%s - Exit Error:invalid bus, rc[%d]\n", __FUNCTION__, rc);
 562                         return rc;
 563                 } else
 564                         index = (u8) busindex;
 565         } else
 566                 index = pslot->ctlr_index;
 567
 568         index = hpc_readcmdtoindex (cmd, index);
 569
 570         if (index == HPC_ERROR) {
 571                 rc = -EINVAL;
 572                 err ("%s - Exit Error:invalid index, rc[%d]\n", __FUNCTION__, rc);
 573                 return rc;
 574         }
 575
 576         ctlr_ptr = pslot->ctrl;
 577
 578         get_hpc_access ();
 579
 580         //--------------------------------------------------------------------
 581         // map physical address to logical address
 582         //--------------------------------------------------------------------
 583         if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
 584                 wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
 585
 586         //--------------------------------------------------------------------
 587         // check controller status before reading
 588         //--------------------------------------------------------------------
 589         rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
 590         if (!rc) {
 591                 switch (cmd) {
 592                 case READ_ALLSTAT:
 593                         // update the slot structure
 594                         pslot->ctrl->status = status;
 595                         pslot->status = ctrl_read (ctlr_ptr, wpg_bbar, index);
 596                         rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
 597                                                        &status);
 598                         if (!rc)
 599                                 pslot->ext_status = ctrl_read (ctlr_ptr, wpg_bbar, index + WPG_1ST_EXTSLOT_INDEX);
 600
 601                         break;
 602
 603                 case READ_SLOTSTATUS:
 604                         // DO NOT update the slot structure
 605                         *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 606                         break;
 607
 608                 case READ_EXTSLOTSTATUS:
 609                         // DO NOT update the slot structure
 610                         *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 611                         break;
 612
 613                 case READ_CTLRSTATUS:
 614                         // DO NOT update the slot structure
 615                         *pstatus = status;
 616                         break;
 617
 618                 case READ_BUSSTATUS:
 619                         pslot->busstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 620                         break;
 621                 case READ_REVLEVEL:
 622                         *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 623                         break;
 624                 case READ_HPCOPTIONS:
 625                         *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 626                         break;
 627                 case READ_SLOTLATCHLOWREG:
 628                         // DO NOT update the slot structure
 629                         *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 630                         break;
 631
 632                         // Not used
 633                 case READ_ALLSLOT:
 634                         list_for_each (pslotlist, &ibmphp_slot_head) {
 635                                 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
 636                                 index = pslot->ctlr_index;
 637                                 rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr,
 638                                                                 wpg_bbar, &status);
 639                                 if (!rc) {
 640                                         pslot->status = ctrl_read (ctlr_ptr, wpg_bbar, index);
 641                                         rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT,
 642                                                                         ctlr_ptr, wpg_bbar, &status);
 643                                         if (!rc)
 644                                                 pslot->ext_status =
 645                                                     ctrl_read (ctlr_ptr, wpg_bbar,
 646                                                                 index + WPG_1ST_EXTSLOT_INDEX);
 647                                 } else {
 648                                         err ("%s - Error ctrl_read failed\n", __FUNCTION__);
 649                                         rc = -EINVAL;
 650                                         break;
 651                                 }
 652                         }
 653                         break;
 654                 default:
 655                         rc = -EINVAL;
 656                         break;
 657                 }
 658         }
 659         //--------------------------------------------------------------------
 660         // cleanup
 661         //--------------------------------------------------------------------
 662
 663         // remove physical to logical address mapping
 664         if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
 665                 iounmap (wpg_bbar);
 666
 667         free_hpc_access ();
 668
 669         debug_polling ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
 670         return rc;
 671 }
 672
 673 /*----------------------------------------------------------------------
 674 * Name:    ibmphp_hpc_writeslot()
 675 *
 676 * Action: issue a WRITE command to HPC
 677 *---------------------------------------------------------------------*/
 678 int ibmphp_hpc_writeslot (struct slot * pslot, u8 cmd)
 679 {
 680         void __iomem *wpg_bbar = NULL;
 681         struct controller *ctlr_ptr;
 682         u8 index, status;
 683         int busindex;
 684         u8 done;
 685         int rc = 0;
 686         int timeout;
 687
 688         debug_polling ("%s - Entry pslot[%p] cmd[%x]\n", __FUNCTION__, pslot, cmd);
 689         if (pslot == NULL) {
 690                 rc = -EINVAL;
 691                 err ("%s - Error Exit rc[%d]\n", __FUNCTION__, rc);
 692                 return rc;
 693         }
 694
 695         if ((cmd == HPC_BUS_33CONVMODE) || (cmd == HPC_BUS_66CONVMODE) ||
 696                 (cmd == HPC_BUS_66PCIXMODE) || (cmd == HPC_BUS_100PCIXMODE) ||
 697                 (cmd == HPC_BUS_133PCIXMODE)) {
 698                 busindex = ibmphp_get_bus_index (pslot->bus);
 699                 if (busindex < 0) {
 700                         rc = -EINVAL;
 701                         err ("%s - Exit Error:invalid bus, rc[%d]\n", __FUNCTION__, rc);
 702                         return rc;
 703                 } else
 704                         index = (u8) busindex;
 705         } else
 706                 index = pslot->ctlr_index;
 707
 708         index = hpc_writecmdtoindex (cmd, index);
 709
 710         if (index == HPC_ERROR) {
 711                 rc = -EINVAL;
 712                 err ("%s - Error Exit rc[%d]\n", __FUNCTION__, rc);
 713                 return rc;
 714         }
 715
 716         ctlr_ptr = pslot->ctrl;
 717
 718         get_hpc_access ();
 719
 720         //--------------------------------------------------------------------
 721         // map physical address to logical address
 722         //--------------------------------------------------------------------
 723         if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4)) {
 724                 wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
 725
 726                 debug ("%s - ctlr id[%x] physical[%lx] logical[%lx] i2c[%x]\n", __FUNCTION__,
 727                 ctlr_ptr->ctlr_id, (ulong) (ctlr_ptr->u.wpeg_ctlr.wpegbbar), (ulong) wpg_bbar,
 728                 ctlr_ptr->u.wpeg_ctlr.i2c_addr);
 729         }
 730         //--------------------------------------------------------------------
 731         // check controller status before writing
 732         //--------------------------------------------------------------------
 733         rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
 734         if (!rc) {
 735
 736                 ctrl_write (ctlr_ptr, wpg_bbar, index, cmd);
 737
 738                 //--------------------------------------------------------------------
 739                 // check controller is still not working on the command
 740                 //--------------------------------------------------------------------
 741                 timeout = CMD_COMPLETE_TOUT_SEC;
 742                 done = 0;
 743                 while (!done) {
 744                         rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
 745                                                         &status);
 746                         if (!rc) {
 747                                 if (NEEDTOCHECK_CMDSTATUS (cmd)) {
 748                                         if (CTLR_FINISHED (status) == HPC_CTLR_FINISHED_YES)
 749                                                 done = 1;
 750                                 } else
 751                                         done = 1;
 752                         }
 753                         if (!done) {
 754                                 msleep(1000);
 755                                 if (timeout < 1) {
 756                                         done = 1;
 757                                         err ("%s - Error command complete timeout\n", __FUNCTION__);
 758                                         rc = -EFAULT;
 759                                 } else
 760                                         timeout--;
 761                         }
 762                 }
 763                 ctlr_ptr->status = status;
 764         }
 765         // cleanup
 766
 767         // remove physical to logical address mapping
 768         if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
 769                 iounmap (wpg_bbar);
 770         free_hpc_access ();
 771
 772         debug_polling ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
 773         return rc;
 774 }
 775
 776 /*----------------------------------------------------------------------
 777 * Name:    get_hpc_access()
 778 *
 779 * Action: make sure only one process can access HPC at one time
 780 *---------------------------------------------------------------------*/
 781 static void get_hpc_access (void)
 782 {
 783         mutex_lock(&sem_hpcaccess);
 784 }
 785
 786 /*----------------------------------------------------------------------
 787 * Name:    free_hpc_access()
 788 *---------------------------------------------------------------------*/
 789 void free_hpc_access (void)
 790 {
 791         mutex_unlock(&sem_hpcaccess);
 792 }
 793
 794 /*----------------------------------------------------------------------
 795 * Name:    ibmphp_lock_operations()
 796 *
 797 * Action: make sure only one process can change the data structure
 798 *---------------------------------------------------------------------*/
 799 void ibmphp_lock_operations (void)
 800 {
 801         down (&semOperations);
 802         to_debug = 1;
 803 }
 804
 805 /*----------------------------------------------------------------------
 806 * Name:    ibmphp_unlock_operations()
 807 *---------------------------------------------------------------------*/
 808 void ibmphp_unlock_operations (void)
 809 {
 810         debug ("%s - Entry\n", __FUNCTION__);
 811         up (&semOperations);
 812         to_debug = 0;
 813         debug ("%s - Exit\n", __FUNCTION__);
 814 }
 815
 816 /*----------------------------------------------------------------------
 817 * Name:    poll_hpc()
 818 *---------------------------------------------------------------------*/
 819 #define POLL_LATCH_REGISTER     0
 820 #define POLL_SLOTS              1
 821 #define POLL_SLEEP              2
 822 static void poll_hpc (void)
 823 {
 824         struct slot myslot;
 825         struct slot *pslot = NULL;
 826         struct list_head *pslotlist;
 827         int rc;
 828         int poll_state = POLL_LATCH_REGISTER;
 829         u8 oldlatchlow = 0x00;
 830         u8 curlatchlow = 0x00;
 831         int poll_count = 0;
 832         u8 ctrl_count = 0x00;
 833
 834         debug ("%s - Entry\n", __FUNCTION__);
 835
 836         while (!ibmphp_shutdown) {
 837                 if (ibmphp_shutdown)
 838                         break;
 839
 840                 /* try to get the lock to do some kind of hardware access */
 841                 down (&semOperations);
 842
 843                 switch (poll_state) {
 844                 case POLL_LATCH_REGISTER:
 845                         oldlatchlow = curlatchlow;
 846                         ctrl_count = 0x00;
 847                         list_for_each (pslotlist, &ibmphp_slot_head) {
 848                                 if (ctrl_count >= ibmphp_get_total_controllers())
 849                                         break;
 850                                 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
 851                                 if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
 852                                         ctrl_count++;
 853                                         if (READ_SLOT_LATCH (pslot->ctrl)) {
 854                                                 rc = ibmphp_hpc_readslot (pslot,
 855                                                                           READ_SLOTLATCHLOWREG,
 856                                                                           &curlatchlow);
 857                                                 if (oldlatchlow != curlatchlow)
 858                                                         process_changeinlatch (oldlatchlow,
 859                                                                                curlatchlow,
 860                                                                                pslot->ctrl);
 861                                         }
 862                                 }
 863                         }
 864                         ++poll_count;
 865                         poll_state = POLL_SLEEP;
 866                         break;
 867                 case POLL_SLOTS:
 868                         list_for_each (pslotlist, &ibmphp_slot_head) {
 869                                 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
 870                                 // make a copy of the old status
 871                                 memcpy ((void *) &myslot, (void *) pslot,
 872                                         sizeof (struct slot));
 873                                 rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
 874                                 if ((myslot.status != pslot->status)
 875                                     || (myslot.ext_status != pslot->ext_status))
 876                                         process_changeinstatus (pslot, &myslot);
 877                         }
 878                         ctrl_count = 0x00;
 879                         list_for_each (pslotlist, &ibmphp_slot_head) {
 880                                 if (ctrl_count >= ibmphp_get_total_controllers())
 881                                         break;
 882                                 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
 883                                 if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
 884                                         ctrl_count++;
 885                                         if (READ_SLOT_LATCH (pslot->ctrl))
 886                                                 rc = ibmphp_hpc_readslot (pslot,
 887                                                                           READ_SLOTLATCHLOWREG,
 888                                                                           &curlatchlow);
 889                                 }
 890                         }
 891                         ++poll_count;
 892                         poll_state = POLL_SLEEP;
 893                         break;
 894                 case POLL_SLEEP:
 895                         /* don't sleep with a lock on the hardware */
 896                         up (&semOperations);
 897                         msleep(POLL_INTERVAL_SEC * 1000);
 898
 899                         if (ibmphp_shutdown)
 900                                 break;
 901
 902                         down (&semOperations);
 903
 904                         if (poll_count >= POLL_LATCH_CNT) {
 905                                 poll_count = 0;
 906                                 poll_state = POLL_SLOTS;
 907                         } else
 908                                 poll_state = POLL_LATCH_REGISTER;
 909                         break;
 910                 }
 911                 /* give up the hardware semaphore */
 912                 up (&semOperations);
 913                 /* sleep for a short time just for good measure */
 914                 msleep(100);
 915         }
 916         up (&sem_exit);
 917         debug ("%s - Exit\n", __FUNCTION__);
 918 }
 919
 920
 921 /*----------------------------------------------------------------------
 922 * Name:    process_changeinstatus
 923 *
 924 * Action:  compare old and new slot status, process the change in status
 925 *
 926 * Input:   pointer to slot struct, old slot struct
 927 *
 928 * Return   0 or error codes
 929 * Value:
 930 *
 931 * Side
 932 * Effects: None.
 933 *
 934 * Notes:
 935 *---------------------------------------------------------------------*/
 936 static int process_changeinstatus (struct slot *pslot, struct slot *poldslot)
 937 {
 938         u8 status;
 939         int rc = 0;
 940         u8 disable = 0;
 941         u8 update = 0;
 942
 943         debug ("process_changeinstatus - Entry pslot[%p], poldslot[%p]\n", pslot, poldslot);
 944
 945         // bit 0 - HPC_SLOT_POWER
 946         if ((pslot->status & 0x01) != (poldslot->status & 0x01))
 947                 update = 1;
 948
 949         // bit 1 - HPC_SLOT_CONNECT
 950         // ignore
 951
 952         // bit 2 - HPC_SLOT_ATTN
 953         if ((pslot->status & 0x04) != (poldslot->status & 0x04))
 954                 update = 1;
 955
 956         // bit 3 - HPC_SLOT_PRSNT2
 957         // bit 4 - HPC_SLOT_PRSNT1
 958         if (((pslot->status & 0x08) != (poldslot->status & 0x08))
 959                 || ((pslot->status & 0x10) != (poldslot->status & 0x10)))
 960                 update = 1;
 961
 962         // bit 5 - HPC_SLOT_PWRGD
 963         if ((pslot->status & 0x20) != (poldslot->status & 0x20))
 964                 // OFF -> ON: ignore, ON -> OFF: disable slot
 965                 if ((poldslot->status & 0x20) && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status)))
 966                         disable = 1;
 967
 968         // bit 6 - HPC_SLOT_BUS_SPEED
 969         // ignore
 970
 971         // bit 7 - HPC_SLOT_LATCH
 972         if ((pslot->status & 0x80) != (poldslot->status & 0x80)) {
 973                 update = 1;
 974                 // OPEN -> CLOSE
 975                 if (pslot->status & 0x80) {
 976                         if (SLOT_PWRGD (pslot->status)) {
 977                                 // power goes on and off after closing latch
 978                                 // check again to make sure power is still ON
 979                                 msleep(1000);
 980                                 rc = ibmphp_hpc_readslot (pslot, READ_SLOTSTATUS, &status);
 981                                 if (SLOT_PWRGD (status))
 982                                         update = 1;
 983                                 else    // overwrite power in pslot to OFF
 984                                         pslot->status &= ~HPC_SLOT_POWER;
 985                         }
 986                 }
 987                 // CLOSE -> OPEN
 988                 else if ((SLOT_PWRGD (poldslot->status) == HPC_SLOT_PWRGD_GOOD)
 989                         && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status))) {
 990                         disable = 1;
 991                 }
 992                 // else - ignore
 993         }
 994         // bit 4 - HPC_SLOT_BLINK_ATTN
 995         if ((pslot->ext_status & 0x08) != (poldslot->ext_status & 0x08))
 996                 update = 1;
 997
 998         if (disable) {
 999                 debug ("process_changeinstatus - disable slot\n");
1000                 pslot->flag = 0;
1001                 rc = ibmphp_do_disable_slot (pslot);
1002         }
1003
1004         if (update || disable) {
1005                 ibmphp_update_slot_info (pslot);
1006         }
1007
1008         debug ("%s - Exit rc[%d] disable[%x] update[%x]\n", __FUNCTION__, rc, disable, update);
1009
1010         return rc;
1011 }
1012
1013 /*----------------------------------------------------------------------
1014 * Name:    process_changeinlatch
1015 *
1016 * Action:  compare old and new latch reg status, process the change
1017 *
1018 * Input:   old and current latch register status
1019 *
1020 * Return   0 or error codes
1021 * Value:
1022 *---------------------------------------------------------------------*/
1023 static int process_changeinlatch (u8 old, u8 new, struct controller *ctrl)
1024 {
1025         struct slot myslot, *pslot;
1026         u8 i;
1027         u8 mask;
1028         int rc = 0;
1029
1030         debug ("%s - Entry old[%x], new[%x]\n", __FUNCTION__, old, new);
1031         // bit 0 reserved, 0 is LSB, check bit 1-6 for 6 slots
1032
1033         for (i = ctrl->starting_slot_num; i <= ctrl->ending_slot_num; i++) {
1034                 mask = 0x01 << i;
1035                 if ((mask & old) != (mask & new)) {
1036                         pslot = ibmphp_get_slot_from_physical_num (i);
1037                         if (pslot) {
1038                                 memcpy ((void *) &myslot, (void *) pslot, sizeof (struct slot));
1039                                 rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
1040                                 debug ("%s - call process_changeinstatus for slot[%d]\n", __FUNCTION__, i);
1041                                 process_changeinstatus (pslot, &myslot);
1042                         } else {
1043                                 rc = -EINVAL;
1044                                 err ("%s - Error bad pointer for slot[%d]\n", __FUNCTION__, i);
1045                         }
1046                 }
1047         }
1048         debug ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
1049         return rc;
1050 }
1051
1052 /*----------------------------------------------------------------------
1053 * Name:    hpc_poll_thread
1054 *
1055 * Action:  polling
1056 *
1057 * Return   0
1058 * Value:
1059 *---------------------------------------------------------------------*/
1060 static int hpc_poll_thread (void *data)
1061 {
1062         debug ("%s - Entry\n", __FUNCTION__);
1063
1064         daemonize("hpc_poll");
1065         allow_signal(SIGKILL);
1066
1067         poll_hpc ();
1068
1069         tid_poll = 0;
1070         debug ("%s - Exit\n", __FUNCTION__);
1071         return 0;
1072 }
1073
1074
1075 /*----------------------------------------------------------------------
1076 * Name:    ibmphp_hpc_start_poll_thread
1077 *
1078 * Action:  start polling thread
1079 *---------------------------------------------------------------------*/
1080 int __init ibmphp_hpc_start_poll_thread (void)
1081 {
1082         int rc = 0;
1083
1084         debug ("%s - Entry\n", __FUNCTION__);
1085
1086         tid_poll = kernel_thread (hpc_poll_thread, NULL, 0);
1087         if (tid_poll < 0) {
1088                 err ("%s - Error, thread not started\n", __FUNCTION__);
1089                 rc = -1;
1090         }
1091
1092         debug ("%s - Exit tid_poll[%d] rc[%d]\n", __FUNCTION__, tid_poll, rc);
1093         return rc;
1094 }
1095
1096 /*----------------------------------------------------------------------
1097 * Name:    ibmphp_hpc_stop_poll_thread
1098 *
1099 * Action:  stop polling thread and cleanup
1100 *---------------------------------------------------------------------*/
1101 void __exit ibmphp_hpc_stop_poll_thread (void)
1102 {
1103         debug ("%s - Entry\n", __FUNCTION__);
1104
1105         ibmphp_shutdown = 1;
1106         debug ("before locking operations \n");
1107         ibmphp_lock_operations ();
1108         debug ("after locking operations \n");
1109
1110         // wait for poll thread to exit
1111         debug ("before sem_exit down \n");
1112         down (&sem_exit);
1113         debug ("after sem_exit down \n");
1114
1115         // cleanup
1116         debug ("before free_hpc_access \n");
1117         free_hpc_access ();
1118         debug ("after free_hpc_access \n");
1119         ibmphp_unlock_operations ();
1120         debug ("after unlock operations \n");
1121         up (&sem_exit);
1122         debug ("after sem exit up\n");
1123
1124         debug ("%s - Exit\n", __FUNCTION__);
1125 }
1126
1127 /*----------------------------------------------------------------------
1128 * Name:    hpc_wait_ctlr_notworking
1129 *
1130 * Action:  wait until the controller is in a not working state
1131 *
1132 * Return   0, HPC_ERROR
1133 * Value:
1134 *---------------------------------------------------------------------*/
1135 static int hpc_wait_ctlr_notworking (int timeout, struct controller *ctlr_ptr, void __iomem *wpg_bbar,
1136                                     u8 * pstatus)
1137 {
1138         int rc = 0;
1139         u8 done = 0;
1140
1141         debug_polling ("hpc_wait_ctlr_notworking - Entry timeout[%d]\n", timeout);
1142
1143         while (!done) {
1144                 *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, WPG_CTLR_INDEX);
1145                 if (*pstatus == HPC_ERROR) {
1146                         rc = HPC_ERROR;
1147                         done = 1;
1148                 }
1149                 if (CTLR_WORKING (*pstatus) == HPC_CTLR_WORKING_NO)
1150                         done = 1;
1151                 if (!done) {
1152                         msleep(1000);
1153                         if (timeout < 1) {
1154                                 done = 1;
1155                                 err ("HPCreadslot - Error ctlr timeout\n");
1156                                 rc = HPC_ERROR;
1157                         } else
1158                                 timeout--;
1159                 }
1160         }
1161         debug_polling ("hpc_wait_ctlr_notworking - Exit rc[%x] status[%x]\n", rc, *pstatus);
1162         return rc;
1163 }