2 * Machine dependent access functions for RTC registers.
4 #ifndef _ASM_X86_MC146818RTC_H
5 #define _ASM_X86_MC146818RTC_H
8 #include <asm/system.h>
9 #include <asm/processor.h>
10 #include <linux/mc146818rtc.h>
13 #define RTC_PORT(x) (0x70 + (x))
14 #define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */
17 #if defined(CONFIG_X86_32) && defined(__HAVE_ARCH_CMPXCHG)
19 * This lock provides nmi access to the CMOS/RTC registers. It has some
20 * special properties. It is owned by a CPU and stores the index register
21 * currently being accessed (if owned). The idea here is that it works
22 * like a normal lock (normally). However, in an NMI, the NMI code will
23 * first check to see if its CPU owns the lock, meaning that the NMI
24 * interrupted during the read/write of the device. If it does, it goes ahead
25 * and performs the access and then restores the index register. If it does
26 * not, it locks normally.
28 * Note that since we are working with NMIs, we need this lock even in
29 * a non-SMP machine just to mark that the lock is owned.
31 * This only works with compare-and-swap. There is no other way to
32 * atomically claim the lock and set the owner.
34 #include <linux/smp.h>
35 extern volatile unsigned long cmos_lock;
38 * All of these below must be called with interrupts off, preempt
42 static inline void lock_cmos(unsigned char reg)
45 new = ((smp_processor_id() + 1) << 8) | reg;
51 if (__cmpxchg(&cmos_lock, 0, new, sizeof(cmos_lock)) == 0)
56 static inline void unlock_cmos(void)
61 static inline int do_i_have_lock_cmos(void)
63 return (cmos_lock >> 8) == (smp_processor_id() + 1);
66 static inline unsigned char current_lock_cmos_reg(void)
68 return cmos_lock & 0xff;
71 #define lock_cmos_prefix(reg) \
73 unsigned long cmos_flags; \
74 local_irq_save(cmos_flags); \
77 #define lock_cmos_suffix(reg) \
79 local_irq_restore(cmos_flags); \
82 #define lock_cmos_prefix(reg) do {} while (0)
83 #define lock_cmos_suffix(reg) do {} while (0)
84 #define lock_cmos(reg)
86 #define do_i_have_lock_cmos() 0
87 #define current_lock_cmos_reg() 0
91 * The yet supported machines all access the RTC index register via
92 * an ISA port access but the way to access the date register differs ...
94 #define CMOS_READ(addr) rtc_cmos_read(addr)
95 #define CMOS_WRITE(val, addr) rtc_cmos_write(val, addr)
96 unsigned char rtc_cmos_read(unsigned char addr);
97 void rtc_cmos_write(unsigned char val, unsigned char addr);
99 extern int mach_set_rtc_mmss(unsigned long nowtime);
100 extern unsigned long mach_get_cmos_time(void);
104 #endif /* _ASM_X86_MC146818RTC_H */