git.oblomov.eu Git - linux-2.6/blob - sound/aoa/codecs/snd-aoa-codec-onyx.c

   1 /*
   2  * Apple Onboard Audio driver for Onyx codec
   3  *
   4  * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
   5  *
   6  * GPL v2, can be found in COPYING.
   7  *
   8  *
   9  * This is a driver for the pcm3052 codec chip (codenamed Onyx)
  10  * that is present in newer Apple hardware (with digital output).
  11  *
  12  * The Onyx codec has the following connections (listed by the bit
  13  * to be used in aoa_codec.connected):
  14  *  0: analog output
  15  *  1: digital output
  16  *  2: line input
  17  *  3: microphone input
  18  * Note that even though I know of no machine that has for example
  19  * the digital output connected but not the analog, I have handled
  20  * all the different cases in the code so that this driver may serve
  21  * as a good example of what to do.
  22  *
  23  * NOTE: This driver assumes that there's at most one chip to be
  24  *       used with one alsa card, in form of creating all kinds
  25  *       of mixer elements without regard for their existence.
  26  *       But snd-aoa assumes that there's at most one card, so
  27  *       this means you can only have one onyx on a system. This
  28  *       should probably be fixed by changing the assumption of
  29  *       having just a single card on a system, and making the
  30  *       'card' pointer accessible to anyone who needs it instead
  31  *       of hiding it in the aoa_snd_* functions...
  32  *
  33  */
  34 #include <linux/delay.h>
  35 #include <linux/module.h>
  36 MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
  37 MODULE_LICENSE("GPL");
  38 MODULE_DESCRIPTION("pcm3052 (onyx) codec driver for snd-aoa");
  39
  40 #include "snd-aoa-codec-onyx.h"
  41 #include "../aoa.h"
  42 #include "../soundbus/soundbus.h"
  43
  44
  45 #define PFX "snd-aoa-codec-onyx: "
  46
  47 struct onyx {
  48         /* cache registers 65 to 80, they are write-only! */
  49         u8                      cache[16];
  50         struct i2c_client       i2c;
  51         struct aoa_codec        codec;
  52         u32                     initialised:1,
  53                                 spdif_locked:1,
  54                                 analog_locked:1,
  55                                 original_mute:2;
  56         int                     open_count;
  57         struct codec_info       *codec_info;
  58
  59         /* mutex serializes concurrent access to the device
  60          * and this structure.
  61          */
  62         struct mutex mutex;
  63 };
  64 #define codec_to_onyx(c) container_of(c, struct onyx, codec)
  65
  66 /* both return 0 if all ok, else on error */
  67 static int onyx_read_register(struct onyx *onyx, u8 reg, u8 *value)
  68 {
  69         s32 v;
  70
  71         if (reg != ONYX_REG_CONTROL) {
  72                 *value = onyx->cache[reg-FIRSTREGISTER];
  73                 return 0;
  74         }
  75         v = i2c_smbus_read_byte_data(&onyx->i2c, reg);
  76         if (v < 0)
  77                 return -1;
  78         *value = (u8)v;
  79         onyx->cache[ONYX_REG_CONTROL-FIRSTREGISTER] = *value;
  80         return 0;
  81 }
  82
  83 static int onyx_write_register(struct onyx *onyx, u8 reg, u8 value)
  84 {
  85         int result;
  86
  87         result = i2c_smbus_write_byte_data(&onyx->i2c, reg, value);
  88         if (!result)
  89                 onyx->cache[reg-FIRSTREGISTER] = value;
  90         return result;
  91 }
  92
  93 /* alsa stuff */
  94
  95 static int onyx_dev_register(struct snd_device *dev)
  96 {
  97         return 0;
  98 }
  99
 100 static struct snd_device_ops ops = {
 101         .dev_register = onyx_dev_register,
 102 };
 103
 104 /* this is necessary because most alsa mixer programs
 105  * can't properly handle the negative range */
 106 #define VOLUME_RANGE_SHIFT      128
 107
 108 static int onyx_snd_vol_info(struct snd_kcontrol *kcontrol,
 109         struct snd_ctl_elem_info *uinfo)
 110 {
 111         uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
 112         uinfo->count = 2;
 113         uinfo->value.integer.min = -128 + VOLUME_RANGE_SHIFT;
 114         uinfo->value.integer.max = -1 + VOLUME_RANGE_SHIFT;
 115         return 0;
 116 }
 117
 118 static int onyx_snd_vol_get(struct snd_kcontrol *kcontrol,
 119         struct snd_ctl_elem_value *ucontrol)
 120 {
 121         struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 122         s8 l, r;
 123
 124         mutex_lock(&onyx->mutex);
 125         onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_LEFT, &l);
 126         onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT, &r);
 127         mutex_unlock(&onyx->mutex);
 128
 129         ucontrol->value.integer.value[0] = l + VOLUME_RANGE_SHIFT;
 130         ucontrol->value.integer.value[1] = r + VOLUME_RANGE_SHIFT;
 131
 132         return 0;
 133 }
 134
 135 static int onyx_snd_vol_put(struct snd_kcontrol *kcontrol,
 136         struct snd_ctl_elem_value *ucontrol)
 137 {
 138         struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 139         s8 l, r;
 140
 141         if (ucontrol->value.integer.value[0] < -128 + VOLUME_RANGE_SHIFT ||
 142             ucontrol->value.integer.value[0] > -1 + VOLUME_RANGE_SHIFT)
 143                 return -EINVAL;
 144         if (ucontrol->value.integer.value[1] < -128 + VOLUME_RANGE_SHIFT ||
 145             ucontrol->value.integer.value[1] > -1 + VOLUME_RANGE_SHIFT)
 146                 return -EINVAL;
 147
 148         mutex_lock(&onyx->mutex);
 149         onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_LEFT, &l);
 150         onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT, &r);
 151
 152         if (l + VOLUME_RANGE_SHIFT == ucontrol->value.integer.value[0] &&
 153             r + VOLUME_RANGE_SHIFT == ucontrol->value.integer.value[1]) {
 154                 mutex_unlock(&onyx->mutex);
 155                 return 0;
 156         }
 157
 158         onyx_write_register(onyx, ONYX_REG_DAC_ATTEN_LEFT,
 159                             ucontrol->value.integer.value[0]
 160                              - VOLUME_RANGE_SHIFT);
 161         onyx_write_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT,
 162                             ucontrol->value.integer.value[1]
 163                              - VOLUME_RANGE_SHIFT);
 164         mutex_unlock(&onyx->mutex);
 165
 166         return 1;
 167 }
 168
 169 static struct snd_kcontrol_new volume_control = {
 170         .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 171         .name = "Master Playback Volume",
 172         .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
 173         .info = onyx_snd_vol_info,
 174         .get = onyx_snd_vol_get,
 175         .put = onyx_snd_vol_put,
 176 };
 177
 178 /* like above, this is necessary because a lot
 179  * of alsa mixer programs don't handle ranges
 180  * that don't start at 0 properly.
 181  * even alsamixer is one of them... */
 182 #define INPUTGAIN_RANGE_SHIFT   (-3)
 183
 184 static int onyx_snd_inputgain_info(struct snd_kcontrol *kcontrol,
 185         struct snd_ctl_elem_info *uinfo)
 186 {
 187         uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
 188         uinfo->count = 1;
 189         uinfo->value.integer.min = 3 + INPUTGAIN_RANGE_SHIFT;
 190         uinfo->value.integer.max = 28 + INPUTGAIN_RANGE_SHIFT;
 191         return 0;
 192 }
 193
 194 static int onyx_snd_inputgain_get(struct snd_kcontrol *kcontrol,
 195         struct snd_ctl_elem_value *ucontrol)
 196 {
 197         struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 198         u8 ig;
 199
 200         mutex_lock(&onyx->mutex);
 201         onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &ig);
 202         mutex_unlock(&onyx->mutex);
 203
 204         ucontrol->value.integer.value[0] =
 205                 (ig & ONYX_ADC_PGA_GAIN_MASK) + INPUTGAIN_RANGE_SHIFT;
 206
 207         return 0;
 208 }
 209
 210 static int onyx_snd_inputgain_put(struct snd_kcontrol *kcontrol,
 211         struct snd_ctl_elem_value *ucontrol)
 212 {
 213         struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 214         u8 v, n;
 215
 216         if (ucontrol->value.integer.value[0] < 3 + INPUTGAIN_RANGE_SHIFT ||
 217             ucontrol->value.integer.value[0] > 28 + INPUTGAIN_RANGE_SHIFT)
 218                 return -EINVAL;
 219         mutex_lock(&onyx->mutex);
 220         onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
 221         n = v;
 222         n &= ~ONYX_ADC_PGA_GAIN_MASK;
 223         n |= (ucontrol->value.integer.value[0] - INPUTGAIN_RANGE_SHIFT)
 224                 & ONYX_ADC_PGA_GAIN_MASK;
 225         onyx_write_register(onyx, ONYX_REG_ADC_CONTROL, n);
 226         mutex_unlock(&onyx->mutex);
 227
 228         return n != v;
 229 }
 230
 231 static struct snd_kcontrol_new inputgain_control = {
 232         .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 233         .name = "Master Capture Volume",
 234         .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
 235         .info = onyx_snd_inputgain_info,
 236         .get = onyx_snd_inputgain_get,
 237         .put = onyx_snd_inputgain_put,
 238 };
 239
 240 static int onyx_snd_capture_source_info(struct snd_kcontrol *kcontrol,
 241         struct snd_ctl_elem_info *uinfo)
 242 {
 243         static char *texts[] = { "Line-In", "Microphone" };
 244
 245         uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
 246         uinfo->count = 1;
 247         uinfo->value.enumerated.items = 2;
 248         if (uinfo->value.enumerated.item > 1)
 249                 uinfo->value.enumerated.item = 1;
 250         strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
 251         return 0;
 252 }
 253
 254 static int onyx_snd_capture_source_get(struct snd_kcontrol *kcontrol,
 255         struct snd_ctl_elem_value *ucontrol)
 256 {
 257         struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 258         s8 v;
 259
 260         mutex_lock(&onyx->mutex);
 261         onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
 262         mutex_unlock(&onyx->mutex);
 263
 264         ucontrol->value.enumerated.item[0] = !!(v&ONYX_ADC_INPUT_MIC);
 265
 266         return 0;
 267 }
 268
 269 static void onyx_set_capture_source(struct onyx *onyx, int mic)
 270 {
 271         s8 v;
 272
 273         mutex_lock(&onyx->mutex);
 274         onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
 275         v &= ~ONYX_ADC_INPUT_MIC;
 276         if (mic)
 277                 v |= ONYX_ADC_INPUT_MIC;
 278         onyx_write_register(onyx, ONYX_REG_ADC_CONTROL, v);
 279         mutex_unlock(&onyx->mutex);
 280 }
 281
 282 static int onyx_snd_capture_source_put(struct snd_kcontrol *kcontrol,
 283         struct snd_ctl_elem_value *ucontrol)
 284 {
 285         if (ucontrol->value.enumerated.item[0] > 1)
 286                 return -EINVAL;
 287         onyx_set_capture_source(snd_kcontrol_chip(kcontrol),
 288                                 ucontrol->value.enumerated.item[0]);
 289         return 1;
 290 }
 291
 292 static struct snd_kcontrol_new capture_source_control = {
 293         .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 294         /* If we name this 'Input Source', it properly shows up in
 295          * alsamixer as a selection, * but it's shown under the
 296          * 'Playback' category.
 297          * If I name it 'Capture Source', it shows up in strange
 298          * ways (two bools of which one can be selected at a
 299          * time) but at least it's shown in the 'Capture'
 300          * category.
 301          * I was told that this was due to backward compatibility,
 302          * but I don't understand then why the mangling is *not*
 303          * done when I name it "Input Source".....
 304          */
 305         .name = "Capture Source",
 306         .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
 307         .info = onyx_snd_capture_source_info,
 308         .get = onyx_snd_capture_source_get,
 309         .put = onyx_snd_capture_source_put,
 310 };
 311
 312 #define onyx_snd_mute_info      snd_ctl_boolean_stereo_info
 313
 314 static int onyx_snd_mute_get(struct snd_kcontrol *kcontrol,
 315         struct snd_ctl_elem_value *ucontrol)
 316 {
 317         struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 318         u8 c;
 319
 320         mutex_lock(&onyx->mutex);
 321         onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &c);
 322         mutex_unlock(&onyx->mutex);
 323
 324         ucontrol->value.integer.value[0] = !(c & ONYX_MUTE_LEFT);
 325         ucontrol->value.integer.value[1] = !(c & ONYX_MUTE_RIGHT);
 326
 327         return 0;
 328 }
 329
 330 static int onyx_snd_mute_put(struct snd_kcontrol *kcontrol,
 331         struct snd_ctl_elem_value *ucontrol)
 332 {
 333         struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 334         u8 v = 0, c = 0;
 335         int err = -EBUSY;
 336
 337         mutex_lock(&onyx->mutex);
 338         if (onyx->analog_locked)
 339                 goto out_unlock;
 340
 341         onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
 342         c = v;
 343         c &= ~(ONYX_MUTE_RIGHT | ONYX_MUTE_LEFT);
 344         if (!ucontrol->value.integer.value[0])
 345                 c |= ONYX_MUTE_LEFT;
 346         if (!ucontrol->value.integer.value[1])
 347                 c |= ONYX_MUTE_RIGHT;
 348         err = onyx_write_register(onyx, ONYX_REG_DAC_CONTROL, c);
 349
 350  out_unlock:
 351         mutex_unlock(&onyx->mutex);
 352
 353         return !err ? (v != c) : err;
 354 }
 355
 356 static struct snd_kcontrol_new mute_control = {
 357         .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 358         .name = "Master Playback Switch",
 359         .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
 360         .info = onyx_snd_mute_info,
 361         .get = onyx_snd_mute_get,
 362         .put = onyx_snd_mute_put,
 363 };
 364
 365
 366 #define onyx_snd_single_bit_info        snd_ctl_boolean_mono_info
 367
 368 #define FLAG_POLARITY_INVERT    1
 369 #define FLAG_SPDIFLOCK          2
 370
 371 static int onyx_snd_single_bit_get(struct snd_kcontrol *kcontrol,
 372         struct snd_ctl_elem_value *ucontrol)
 373 {
 374         struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 375         u8 c;
 376         long int pv = kcontrol->private_value;
 377         u8 polarity = (pv >> 16) & FLAG_POLARITY_INVERT;
 378         u8 address = (pv >> 8) & 0xff;
 379         u8 mask = pv & 0xff;
 380
 381         mutex_lock(&onyx->mutex);
 382         onyx_read_register(onyx, address, &c);
 383         mutex_unlock(&onyx->mutex);
 384
 385         ucontrol->value.integer.value[0] = !!(c & mask) ^ polarity;
 386
 387         return 0;
 388 }
 389
 390 static int onyx_snd_single_bit_put(struct snd_kcontrol *kcontrol,
 391         struct snd_ctl_elem_value *ucontrol)
 392 {
 393         struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 394         u8 v = 0, c = 0;
 395         int err;
 396         long int pv = kcontrol->private_value;
 397         u8 polarity = (pv >> 16) & FLAG_POLARITY_INVERT;
 398         u8 spdiflock = (pv >> 16) & FLAG_SPDIFLOCK;
 399         u8 address = (pv >> 8) & 0xff;
 400         u8 mask = pv & 0xff;
 401
 402         mutex_lock(&onyx->mutex);
 403         if (spdiflock && onyx->spdif_locked) {
 404                 /* even if alsamixer doesn't care.. */
 405                 err = -EBUSY;
 406                 goto out_unlock;
 407         }
 408         onyx_read_register(onyx, address, &v);
 409         c = v;
 410         c &= ~(mask);
 411         if (!!ucontrol->value.integer.value[0] ^ polarity)
 412                 c |= mask;
 413         err = onyx_write_register(onyx, address, c);
 414
 415  out_unlock:
 416         mutex_unlock(&onyx->mutex);
 417
 418         return !err ? (v != c) : err;
 419 }
 420
 421 #define SINGLE_BIT(n, type, description, address, mask, flags)          \
 422 static struct snd_kcontrol_new n##_control = {                          \
 423         .iface = SNDRV_CTL_ELEM_IFACE_##type,                           \
 424         .name = description,                                            \
 425         .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,                      \
 426         .info = onyx_snd_single_bit_info,                               \
 427         .get = onyx_snd_single_bit_get,                                 \
 428         .put = onyx_snd_single_bit_put,                                 \
 429         .private_value = (flags << 16) | (address << 8) | mask          \
 430 }
 431
 432 SINGLE_BIT(spdif,
 433            MIXER,
 434            SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH),
 435            ONYX_REG_DIG_INFO4,
 436            ONYX_SPDIF_ENABLE,
 437            FLAG_SPDIFLOCK);
 438 SINGLE_BIT(ovr1,
 439            MIXER,
 440            "Oversampling Rate",
 441            ONYX_REG_DAC_CONTROL,
 442            ONYX_OVR1,
 443            0);
 444 SINGLE_BIT(flt0,
 445            MIXER,
 446            "Fast Digital Filter Rolloff",
 447            ONYX_REG_DAC_FILTER,
 448            ONYX_ROLLOFF_FAST,
 449            FLAG_POLARITY_INVERT);
 450 SINGLE_BIT(hpf,
 451            MIXER,
 452            "Highpass Filter",
 453            ONYX_REG_ADC_HPF_BYPASS,
 454            ONYX_HPF_DISABLE,
 455            FLAG_POLARITY_INVERT);
 456 SINGLE_BIT(dm12,
 457            MIXER,
 458            "Digital De-Emphasis",
 459            ONYX_REG_DAC_DEEMPH,
 460            ONYX_DIGDEEMPH_CTRL,
 461            0);
 462
 463 static int onyx_spdif_info(struct snd_kcontrol *kcontrol,
 464                            struct snd_ctl_elem_info *uinfo)
 465 {
 466         uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
 467         uinfo->count = 1;
 468         return 0;
 469 }
 470
 471 static int onyx_spdif_mask_get(struct snd_kcontrol *kcontrol,
 472                                struct snd_ctl_elem_value *ucontrol)
 473 {
 474         /* datasheet page 30, all others are 0 */
 475         ucontrol->value.iec958.status[0] = 0x3e;
 476         ucontrol->value.iec958.status[1] = 0xff;
 477
 478         ucontrol->value.iec958.status[3] = 0x3f;
 479         ucontrol->value.iec958.status[4] = 0x0f;
 480
 481         return 0;
 482 }
 483
 484 static struct snd_kcontrol_new onyx_spdif_mask = {
 485         .access =       SNDRV_CTL_ELEM_ACCESS_READ,
 486         .iface =        SNDRV_CTL_ELEM_IFACE_PCM,
 487         .name =         SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK),
 488         .info =         onyx_spdif_info,
 489         .get =          onyx_spdif_mask_get,
 490 };
 491
 492 static int onyx_spdif_get(struct snd_kcontrol *kcontrol,
 493                           struct snd_ctl_elem_value *ucontrol)
 494 {
 495         struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 496         u8 v;
 497
 498         mutex_lock(&onyx->mutex);
 499         onyx_read_register(onyx, ONYX_REG_DIG_INFO1, &v);
 500         ucontrol->value.iec958.status[0] = v & 0x3e;
 501
 502         onyx_read_register(onyx, ONYX_REG_DIG_INFO2, &v);
 503         ucontrol->value.iec958.status[1] = v;
 504
 505         onyx_read_register(onyx, ONYX_REG_DIG_INFO3, &v);
 506         ucontrol->value.iec958.status[3] = v & 0x3f;
 507
 508         onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
 509         ucontrol->value.iec958.status[4] = v & 0x0f;
 510         mutex_unlock(&onyx->mutex);
 511
 512         return 0;
 513 }
 514
 515 static int onyx_spdif_put(struct snd_kcontrol *kcontrol,
 516                           struct snd_ctl_elem_value *ucontrol)
 517 {
 518         struct onyx *onyx = snd_kcontrol_chip(kcontrol);
 519         u8 v;
 520
 521         mutex_lock(&onyx->mutex);
 522         onyx_read_register(onyx, ONYX_REG_DIG_INFO1, &v);
 523         v = (v & ~0x3e) | (ucontrol->value.iec958.status[0] & 0x3e);
 524         onyx_write_register(onyx, ONYX_REG_DIG_INFO1, v);
 525
 526         v = ucontrol->value.iec958.status[1];
 527         onyx_write_register(onyx, ONYX_REG_DIG_INFO2, v);
 528
 529         onyx_read_register(onyx, ONYX_REG_DIG_INFO3, &v);
 530         v = (v & ~0x3f) | (ucontrol->value.iec958.status[3] & 0x3f);
 531         onyx_write_register(onyx, ONYX_REG_DIG_INFO3, v);
 532
 533         onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
 534         v = (v & ~0x0f) | (ucontrol->value.iec958.status[4] & 0x0f);
 535         onyx_write_register(onyx, ONYX_REG_DIG_INFO4, v);
 536         mutex_unlock(&onyx->mutex);
 537
 538         return 1;
 539 }
 540
 541 static struct snd_kcontrol_new onyx_spdif_ctrl = {
 542         .access =       SNDRV_CTL_ELEM_ACCESS_READWRITE,
 543         .iface =        SNDRV_CTL_ELEM_IFACE_PCM,
 544         .name =         SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
 545         .info =         onyx_spdif_info,
 546         .get =          onyx_spdif_get,
 547         .put =          onyx_spdif_put,
 548 };
 549
 550 /* our registers */
 551
 552 static u8 register_map[] = {
 553         ONYX_REG_DAC_ATTEN_LEFT,
 554         ONYX_REG_DAC_ATTEN_RIGHT,
 555         ONYX_REG_CONTROL,
 556         ONYX_REG_DAC_CONTROL,
 557         ONYX_REG_DAC_DEEMPH,
 558         ONYX_REG_DAC_FILTER,
 559         ONYX_REG_DAC_OUTPHASE,
 560         ONYX_REG_ADC_CONTROL,
 561         ONYX_REG_ADC_HPF_BYPASS,
 562         ONYX_REG_DIG_INFO1,
 563         ONYX_REG_DIG_INFO2,
 564         ONYX_REG_DIG_INFO3,
 565         ONYX_REG_DIG_INFO4
 566 };
 567
 568 static u8 initial_values[ARRAY_SIZE(register_map)] = {
 569         0x80, 0x80, /* muted */
 570         ONYX_MRST | ONYX_SRST, /* but handled specially! */
 571         ONYX_MUTE_LEFT | ONYX_MUTE_RIGHT,
 572         0, /* no deemphasis */
 573         ONYX_DAC_FILTER_ALWAYS,
 574         ONYX_OUTPHASE_INVERTED,
 575         (-1 /*dB*/ + 8) & 0xF, /* line in selected, -1 dB gain*/
 576         ONYX_ADC_HPF_ALWAYS,
 577         (1<<2), /* pcm audio */
 578         2,      /* category: pcm coder */
 579         0,      /* sampling frequency 44.1 kHz, clock accuracy level II */
 580         1       /* 24 bit depth */
 581 };
 582
 583 /* reset registers of chip, either to initial or to previous values */
 584 static int onyx_register_init(struct onyx *onyx)
 585 {
 586         int i;
 587         u8 val;
 588         u8 regs[sizeof(initial_values)];
 589
 590         if (!onyx->initialised) {
 591                 memcpy(regs, initial_values, sizeof(initial_values));
 592                 if (onyx_read_register(onyx, ONYX_REG_CONTROL, &val))
 593                         return -1;
 594                 val &= ~ONYX_SILICONVERSION;
 595                 val |= initial_values[3];
 596                 regs[3] = val;
 597         } else {
 598                 for (i=0; i<sizeof(register_map); i++)
 599                         regs[i] = onyx->cache[register_map[i]-FIRSTREGISTER];
 600         }
 601
 602         for (i=0; i<sizeof(register_map); i++) {
 603                 if (onyx_write_register(onyx, register_map[i], regs[i]))
 604                         return -1;
 605         }
 606         onyx->initialised = 1;
 607         return 0;
 608 }
 609
 610 static struct transfer_info onyx_transfers[] = {
 611         /* this is first so we can skip it if no input is present...
 612          * No hardware exists with that, but it's here as an example
 613          * of what to do :) */
 614         {
 615                 /* analog input */
 616                 .formats = SNDRV_PCM_FMTBIT_S8 |
 617                            SNDRV_PCM_FMTBIT_S16_BE |
 618                            SNDRV_PCM_FMTBIT_S24_BE,
 619                 .rates = SNDRV_PCM_RATE_8000_96000,
 620                 .transfer_in = 1,
 621                 .must_be_clock_source = 0,
 622                 .tag = 0,
 623         },
 624         {
 625                 /* if analog and digital are currently off, anything should go,
 626                  * so this entry describes everything we can do... */
 627                 .formats = SNDRV_PCM_FMTBIT_S8 |
 628                            SNDRV_PCM_FMTBIT_S16_BE |
 629                            SNDRV_PCM_FMTBIT_S24_BE
 630 #ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE
 631                            | SNDRV_PCM_FMTBIT_COMPRESSED_16BE
 632 #endif
 633                 ,
 634                 .rates = SNDRV_PCM_RATE_8000_96000,
 635                 .tag = 0,
 636         },
 637         {
 638                 /* analog output */
 639                 .formats = SNDRV_PCM_FMTBIT_S8 |
 640                            SNDRV_PCM_FMTBIT_S16_BE |
 641                            SNDRV_PCM_FMTBIT_S24_BE,
 642                 .rates = SNDRV_PCM_RATE_8000_96000,
 643                 .transfer_in = 0,
 644                 .must_be_clock_source = 0,
 645                 .tag = 1,
 646         },
 647         {
 648                 /* digital pcm output, also possible for analog out */
 649                 .formats = SNDRV_PCM_FMTBIT_S8 |
 650                            SNDRV_PCM_FMTBIT_S16_BE |
 651                            SNDRV_PCM_FMTBIT_S24_BE,
 652                 .rates = SNDRV_PCM_RATE_32000 |
 653                          SNDRV_PCM_RATE_44100 |
 654                          SNDRV_PCM_RATE_48000,
 655                 .transfer_in = 0,
 656                 .must_be_clock_source = 0,
 657                 .tag = 2,
 658         },
 659 #ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE
 660         /* Once alsa gets supports for this kind of thing we can add it... */
 661         {
 662                 /* digital compressed output */
 663                 .formats =  SNDRV_PCM_FMTBIT_COMPRESSED_16BE,
 664                 .rates = SNDRV_PCM_RATE_32000 |
 665                          SNDRV_PCM_RATE_44100 |
 666                          SNDRV_PCM_RATE_48000,
 667                 .tag = 2,
 668         },
 669 #endif
 670         {}
 671 };
 672
 673 static int onyx_usable(struct codec_info_item *cii,
 674                        struct transfer_info *ti,
 675                        struct transfer_info *out)
 676 {
 677         u8 v;
 678         struct onyx *onyx = cii->codec_data;
 679         int spdif_enabled, analog_enabled;
 680
 681         mutex_lock(&onyx->mutex);
 682         onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
 683         spdif_enabled = !!(v & ONYX_SPDIF_ENABLE);
 684         onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
 685         analog_enabled =
 686                 (v & (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT))
 687                  != (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT);
 688         mutex_unlock(&onyx->mutex);
 689
 690         switch (ti->tag) {
 691         case 0: return 1;
 692         case 1: return analog_enabled;
 693         case 2: return spdif_enabled;
 694         }
 695         return 1;
 696 }
 697
 698 static int onyx_prepare(struct codec_info_item *cii,
 699                         struct bus_info *bi,
 700                         struct snd_pcm_substream *substream)
 701 {
 702         u8 v;
 703         struct onyx *onyx = cii->codec_data;
 704         int err = -EBUSY;
 705
 706         mutex_lock(&onyx->mutex);
 707
 708 #ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE
 709         if (substream->runtime->format == SNDRV_PCM_FMTBIT_COMPRESSED_16BE) {
 710                 /* mute and lock analog output */
 711                 onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
 712                 if (onyx_write_register(onyx,
 713                                         ONYX_REG_DAC_CONTROL,
 714                                         v | ONYX_MUTE_RIGHT | ONYX_MUTE_LEFT))
 715                         goto out_unlock;
 716                 onyx->analog_locked = 1;
 717                 err = 0;
 718                 goto out_unlock;
 719         }
 720 #endif
 721         switch (substream->runtime->rate) {
 722         case 32000:
 723         case 44100:
 724         case 48000:
 725                 /* these rates are ok for all outputs */
 726                 /* FIXME: program spdif channel control bits here so that
 727                  *        userspace doesn't have to if it only plays pcm! */
 728                 err = 0;
 729                 goto out_unlock;
 730         default:
 731                 /* got some rate that the digital output can't do,
 732                  * so disable and lock it */
 733                 onyx_read_register(cii->codec_data, ONYX_REG_DIG_INFO4, &v);
 734                 if (onyx_write_register(onyx,
 735                                         ONYX_REG_DIG_INFO4,
 736                                         v & ~ONYX_SPDIF_ENABLE))
 737                         goto out_unlock;
 738                 onyx->spdif_locked = 1;
 739                 err = 0;
 740                 goto out_unlock;
 741         }
 742
 743  out_unlock:
 744         mutex_unlock(&onyx->mutex);
 745
 746         return err;
 747 }
 748
 749 static int onyx_open(struct codec_info_item *cii,
 750                      struct snd_pcm_substream *substream)
 751 {
 752         struct onyx *onyx = cii->codec_data;
 753
 754         mutex_lock(&onyx->mutex);
 755         onyx->open_count++;
 756         mutex_unlock(&onyx->mutex);
 757
 758         return 0;
 759 }
 760
 761 static int onyx_close(struct codec_info_item *cii,
 762                       struct snd_pcm_substream *substream)
 763 {
 764         struct onyx *onyx = cii->codec_data;
 765
 766         mutex_lock(&onyx->mutex);
 767         onyx->open_count--;
 768         if (!onyx->open_count)
 769                 onyx->spdif_locked = onyx->analog_locked = 0;
 770         mutex_unlock(&onyx->mutex);
 771
 772         return 0;
 773 }
 774
 775 static int onyx_switch_clock(struct codec_info_item *cii,
 776                              enum clock_switch what)
 777 {
 778         struct onyx *onyx = cii->codec_data;
 779
 780         mutex_lock(&onyx->mutex);
 781         /* this *MUST* be more elaborate later... */
 782         switch (what) {
 783         case CLOCK_SWITCH_PREPARE_SLAVE:
 784                 onyx->codec.gpio->methods->all_amps_off(onyx->codec.gpio);
 785                 break;
 786         case CLOCK_SWITCH_SLAVE:
 787                 onyx->codec.gpio->methods->all_amps_restore(onyx->codec.gpio);
 788                 break;
 789         default: /* silence warning */
 790                 break;
 791         }
 792         mutex_unlock(&onyx->mutex);
 793
 794         return 0;
 795 }
 796
 797 #ifdef CONFIG_PM
 798
 799 static int onyx_suspend(struct codec_info_item *cii, pm_message_t state)
 800 {
 801         struct onyx *onyx = cii->codec_data;
 802         u8 v;
 803         int err = -ENXIO;
 804
 805         mutex_lock(&onyx->mutex);
 806         if (onyx_read_register(onyx, ONYX_REG_CONTROL, &v))
 807                 goto out_unlock;
 808         onyx_write_register(onyx, ONYX_REG_CONTROL, v | ONYX_ADPSV | ONYX_DAPSV);
 809         /* Apple does a sleep here but the datasheet says to do it on resume */
 810         err = 0;
 811  out_unlock:
 812         mutex_unlock(&onyx->mutex);
 813
 814         return err;
 815 }
 816
 817 static int onyx_resume(struct codec_info_item *cii)
 818 {
 819         struct onyx *onyx = cii->codec_data;
 820         u8 v;
 821         int err = -ENXIO;
 822
 823         mutex_lock(&onyx->mutex);
 824
 825         /* reset codec */
 826         onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
 827         msleep(1);
 828         onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 1);
 829         msleep(1);
 830         onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
 831         msleep(1);
 832
 833         /* take codec out of suspend (if it still is after reset) */
 834         if (onyx_read_register(onyx, ONYX_REG_CONTROL, &v))
 835                 goto out_unlock;
 836         onyx_write_register(onyx, ONYX_REG_CONTROL, v & ~(ONYX_ADPSV | ONYX_DAPSV));
 837         /* FIXME: should divide by sample rate, but 8k is the lowest we go */
 838         msleep(2205000/8000);
 839         /* reset all values */
 840         onyx_register_init(onyx);
 841         err = 0;
 842  out_unlock:
 843         mutex_unlock(&onyx->mutex);
 844
 845         return err;
 846 }
 847
 848 #endif /* CONFIG_PM */
 849
 850 static struct codec_info onyx_codec_info = {
 851         .transfers = onyx_transfers,
 852         .sysclock_factor = 256,
 853         .bus_factor = 64,
 854         .owner = THIS_MODULE,
 855         .usable = onyx_usable,
 856         .prepare = onyx_prepare,
 857         .open = onyx_open,
 858         .close = onyx_close,
 859         .switch_clock = onyx_switch_clock,
 860 #ifdef CONFIG_PM
 861         .suspend = onyx_suspend,
 862         .resume = onyx_resume,
 863 #endif
 864 };
 865
 866 static int onyx_init_codec(struct aoa_codec *codec)
 867 {
 868         struct onyx *onyx = codec_to_onyx(codec);
 869         struct snd_kcontrol *ctl;
 870         struct codec_info *ci = &onyx_codec_info;
 871         u8 v;
 872         int err;
 873
 874         if (!onyx->codec.gpio || !onyx->codec.gpio->methods) {
 875                 printk(KERN_ERR PFX "gpios not assigned!!\n");
 876                 return -EINVAL;
 877         }
 878
 879         onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
 880         msleep(1);
 881         onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 1);
 882         msleep(1);
 883         onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
 884         msleep(1);
 885
 886         if (onyx_register_init(onyx)) {
 887                 printk(KERN_ERR PFX "failed to initialise onyx registers\n");
 888                 return -ENODEV;
 889         }
 890
 891         if (aoa_snd_device_new(SNDRV_DEV_LOWLEVEL, onyx, &ops)) {
 892                 printk(KERN_ERR PFX "failed to create onyx snd device!\n");
 893                 return -ENODEV;
 894         }
 895
 896         /* nothing connected? what a joke! */
 897         if ((onyx->codec.connected & 0xF) == 0)
 898                 return -ENOTCONN;
 899
 900         /* if no inputs are present... */
 901         if ((onyx->codec.connected & 0xC) == 0) {
 902                 if (!onyx->codec_info)
 903                         onyx->codec_info = kmalloc(sizeof(struct codec_info), GFP_KERNEL);
 904                 if (!onyx->codec_info)
 905                         return -ENOMEM;
 906                 ci = onyx->codec_info;
 907                 *ci = onyx_codec_info;
 908                 ci->transfers++;
 909         }
 910
 911         /* if no outputs are present... */
 912         if ((onyx->codec.connected & 3) == 0) {
 913                 if (!onyx->codec_info)
 914                         onyx->codec_info = kmalloc(sizeof(struct codec_info), GFP_KERNEL);
 915                 if (!onyx->codec_info)
 916                         return -ENOMEM;
 917                 ci = onyx->codec_info;
 918                 /* this is fine as there have to be inputs
 919                  * if we end up in this part of the code */
 920                 *ci = onyx_codec_info;
 921                 ci->transfers[1].formats = 0;
 922         }
 923
 924         if (onyx->codec.soundbus_dev->attach_codec(onyx->codec.soundbus_dev,
 925                                                    aoa_get_card(),
 926                                                    ci, onyx)) {
 927                 printk(KERN_ERR PFX "error creating onyx pcm\n");
 928                 return -ENODEV;
 929         }
 930 #define ADDCTL(n)                                                       \
 931         do {                                                            \
 932                 ctl = snd_ctl_new1(&n, onyx);                           \
 933                 if (ctl) {                                              \
 934                         ctl->id.device =                                \
 935                                 onyx->codec.soundbus_dev->pcm->device;  \
 936                         err = aoa_snd_ctl_add(ctl);                     \
 937                         if (err)                                        \
 938                                 goto error;                             \
 939                 }                                                       \
 940         } while (0)
 941
 942         if (onyx->codec.soundbus_dev->pcm) {
 943                 /* give the user appropriate controls
 944                  * depending on what inputs are connected */
 945                 if ((onyx->codec.connected & 0xC) == 0xC)
 946                         ADDCTL(capture_source_control);
 947                 else if (onyx->codec.connected & 4)
 948                         onyx_set_capture_source(onyx, 0);
 949                 else
 950                         onyx_set_capture_source(onyx, 1);
 951                 if (onyx->codec.connected & 0xC)
 952                         ADDCTL(inputgain_control);
 953
 954                 /* depending on what output is connected,
 955                  * give the user appropriate controls */
 956                 if (onyx->codec.connected & 1) {
 957                         ADDCTL(volume_control);
 958                         ADDCTL(mute_control);
 959                         ADDCTL(ovr1_control);
 960                         ADDCTL(flt0_control);
 961                         ADDCTL(hpf_control);
 962                         ADDCTL(dm12_control);
 963                         /* spdif control defaults to off */
 964                 }
 965                 if (onyx->codec.connected & 2) {
 966                         ADDCTL(onyx_spdif_mask);
 967                         ADDCTL(onyx_spdif_ctrl);
 968                 }
 969                 if ((onyx->codec.connected & 3) == 3)
 970                         ADDCTL(spdif_control);
 971                 /* if only S/PDIF is connected, enable it unconditionally */
 972                 if ((onyx->codec.connected & 3) == 2) {
 973                         onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
 974                         v |= ONYX_SPDIF_ENABLE;
 975                         onyx_write_register(onyx, ONYX_REG_DIG_INFO4, v);
 976                 }
 977         }
 978 #undef ADDCTL
 979         printk(KERN_INFO PFX "attached to onyx codec via i2c\n");
 980
 981         return 0;
 982  error:
 983         onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
 984         snd_device_free(aoa_get_card(), onyx);
 985         return err;
 986 }
 987
 988 static void onyx_exit_codec(struct aoa_codec *codec)
 989 {
 990         struct onyx *onyx = codec_to_onyx(codec);
 991
 992         if (!onyx->codec.soundbus_dev) {
 993                 printk(KERN_ERR PFX "onyx_exit_codec called without soundbus_dev!\n");
 994                 return;
 995         }
 996         onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
 997 }
 998
 999 static struct i2c_driver onyx_driver;
1000
1001 static int onyx_create(struct i2c_adapter *adapter,
1002                        struct device_node *node,
1003                        int addr)
1004 {
1005         struct onyx *onyx;
1006         u8 dummy;
1007
1008         onyx = kzalloc(sizeof(struct onyx), GFP_KERNEL);
1009
1010         if (!onyx)
1011                 return -ENOMEM;
1012
1013         mutex_init(&onyx->mutex);
1014         onyx->i2c.driver = &onyx_driver;
1015         onyx->i2c.adapter = adapter;
1016         onyx->i2c.addr = addr & 0x7f;
1017         strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE);
1018
1019         if (i2c_attach_client(&onyx->i2c)) {
1020                 printk(KERN_ERR PFX "failed to attach to i2c\n");
1021                 goto fail;
1022         }
1023
1024         /* we try to read from register ONYX_REG_CONTROL
1025          * to check if the codec is present */
1026         if (onyx_read_register(onyx, ONYX_REG_CONTROL, &dummy) != 0) {
1027                 i2c_detach_client(&onyx->i2c);
1028                 printk(KERN_ERR PFX "failed to read control register\n");
1029                 goto fail;
1030         }
1031
1032         strlcpy(onyx->codec.name, "onyx", MAX_CODEC_NAME_LEN);
1033         onyx->codec.owner = THIS_MODULE;
1034         onyx->codec.init = onyx_init_codec;
1035         onyx->codec.exit = onyx_exit_codec;
1036         onyx->codec.node = of_node_get(node);
1037
1038         if (aoa_codec_register(&onyx->codec)) {
1039                 i2c_detach_client(&onyx->i2c);
1040                 goto fail;
1041         }
1042         printk(KERN_DEBUG PFX "created and attached onyx instance\n");
1043         return 0;
1044  fail:
1045         kfree(onyx);
1046         return -EINVAL;
1047 }
1048
1049 static int onyx_i2c_attach(struct i2c_adapter *adapter)
1050 {
1051         struct device_node *busnode, *dev = NULL;
1052         struct pmac_i2c_bus *bus;
1053
1054         bus = pmac_i2c_adapter_to_bus(adapter);
1055         if (bus == NULL)
1056                 return -ENODEV;
1057         busnode = pmac_i2c_get_bus_node(bus);
1058
1059         while ((dev = of_get_next_child(busnode, dev)) != NULL) {
1060                 if (of_device_is_compatible(dev, "pcm3052")) {
1061                         const u32 *addr;
1062                         printk(KERN_DEBUG PFX "found pcm3052\n");
1063                         addr = of_get_property(dev, "reg", NULL);
1064                         if (!addr)
1065                                 return -ENODEV;
1066                         return onyx_create(adapter, dev, (*addr)>>1);
1067                 }
1068         }
1069
1070         /* if that didn't work, try desperate mode for older
1071          * machines that have stuff missing from the device tree */
1072
1073         if (!of_device_is_compatible(busnode, "k2-i2c"))
1074                 return -ENODEV;
1075
1076         printk(KERN_DEBUG PFX "found k2-i2c, checking if onyx chip is on it\n");
1077         /* probe both possible addresses for the onyx chip */
1078         if (onyx_create(adapter, NULL, 0x46) == 0)
1079                 return 0;
1080         return onyx_create(adapter, NULL, 0x47);
1081 }
1082
1083 static int onyx_i2c_detach(struct i2c_client *client)
1084 {
1085         struct onyx *onyx = container_of(client, struct onyx, i2c);
1086         int err;
1087
1088         if ((err = i2c_detach_client(client)))
1089                 return err;
1090         aoa_codec_unregister(&onyx->codec);
1091         of_node_put(onyx->codec.node);
1092         if (onyx->codec_info)
1093                 kfree(onyx->codec_info);
1094         kfree(onyx);
1095         return 0;
1096 }
1097
1098 static struct i2c_driver onyx_driver = {
1099         .driver = {
1100                 .name = "aoa_codec_onyx",
1101                 .owner = THIS_MODULE,
1102         },
1103         .attach_adapter = onyx_i2c_attach,
1104         .detach_client = onyx_i2c_detach,
1105 };
1106
1107 static int __init onyx_init(void)
1108 {
1109         return i2c_add_driver(&onyx_driver);
1110 }
1111
1112 static void __exit onyx_exit(void)
1113 {
1114         i2c_del_driver(&onyx_driver);
1115 }
1116
1117 module_init(onyx_init);
1118 module_exit(onyx_exit);