[PATCH] i386: Page-align the GDT

[linux-2.6] / sound / oss / aci.c

/*
 * Audio Command Interface (ACI) driver (sound/aci.c)
 *
 * ACI is a protocol used to communicate with the microcontroller on
 * some sound cards produced by miro, e.g. the miroSOUND PCM12 and
 * PCM20. The ACI has been developed for miro by Norberto Pellicci
 * <pellicci@home.com>. Special thanks to both him and miro for
 * providing the ACI specification.
 *
 * The main function of the ACI is to control the mixer and to get a
 * product identification. On the PCM20, ACI also controls the radio
 * tuner on this card, this is supported in the Video for Linux 
 * miropcm20 driver.
 * -
 * This is a fullfeatured implementation. Unsupported features
 * are bugs... (:
 *
 * It is not longer necessary to load the mad16 module first. The
 * user is currently responsible to set the mad16 mixer correctly.
 *
 * To toggle the solo mode for full duplex operation just use the OSS
 * record switch for the pcm ('wave') controller.           Robert
 * -
 *
 * Revision history:
 *
 *   1995-11-10  Markus Kuhn <mskuhn@cip.informatik.uni-erlangen.de>
 *        First version written.
 *   1995-12-31  Markus Kuhn
 *        Second revision, general code cleanup.
 *   1996-05-16  Hannu Savolainen
 *        Integrated with other parts of the driver.
 *   1996-05-28  Markus Kuhn
 *        Initialize CS4231A mixer, make ACI first mixer,
 *        use new private mixer API for solo mode.
 *   1998-08-18  Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl>
 *        Small modification to export ACI functions and 
 *        complete modularisation.
 *   2000-06-20  Robert Siemer <Robert.Siemer@gmx.de>
 *        Don't initialize the CS4231A mixer anymore, so the code is
 *        working again, and other small changes to fit in todays
 *        kernels.
 *   2000-08-26  Robert Siemer
 *        Clean up and rewrite for 2.4.x. Maybe it's SMP safe now... (:
 *        ioctl bugfix, and integration of solo-mode into OSS-API,
 *        added (OSS-limited) equalizer support, return value bugfix,
 *        changed param aci_reset to reset, new params: ide, wss.
 *   2001-04-20  Robert Siemer
 *        even more cleanups...
 *   2001-10-08  Arnaldo Carvalho de Melo <acme@conectiva.com.br>
 *        Get rid of check_region, .bss optimizations, use set_current_state
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h> 
#include <linux/proc_fs.h>
#include <linux/slab.h>
#include <linux/mutex.h>

#include <asm/io.h>
#include <asm/uaccess.h>
#include "sound_config.h"

int aci_port;   /* as determined by bit 4 in the OPTi 929 MC4 register */
static int aci_idcode[2];       /* manufacturer and product ID */
int aci_version;        /* ACI firmware version */

EXPORT_SYMBOL(aci_port);
EXPORT_SYMBOL(aci_version);

#include "aci.h"


static int aci_solo;    /* status bit of the card that can't be         *
                         * checked with ACI versions prior to 0xb0      */
static int aci_amp;   /* status bit for power-amp/line-out level
                           but I have no docs about what is what... */
static int aci_micpreamp=3; /* microphone preamp-level that can't be    *
                         * checked with ACI versions prior to 0xb0      */

static int mixer_device;
static struct mutex aci_mutex;

#ifdef MODULE
static int reset;
module_param(reset, bool, 0);
MODULE_PARM_DESC(reset,"When set to 1, reset aci mixer.");
#else
static int reset = 1;
#endif

static int ide=-1;
module_param(ide, int, 0);
MODULE_PARM_DESC(ide,"1 enable, 0 disable ide-port - untested"
                 " default: do nothing");
static int wss=-1;
module_param(wss, int, 0);
MODULE_PARM_DESC(wss,"change between ACI/WSS-mixer; use 0 and 1 - untested"
                 " default: do nothing; for PCM1-pro only");

#ifdef DEBUG
static void print_bits(unsigned char c)
{
        int j;
        printk(KERN_DEBUG "aci: ");

        for (j=7; j>=0; j--) {
                printk("%d", (c >> j) & 0x1);
        }

        printk("\n");
}
#endif

/*
 * This busy wait code normally requires less than 15 loops and
 * practically always less than 100 loops on my i486/DX2 66 MHz.
 *
 * Warning: Waiting on the general status flag after reseting the MUTE
 * function can take a VERY long time, because the PCM12 does some kind
 * of fade-in effect. For this reason, access to the MUTE function has
 * not been implemented at all.
 *
 * - The OSS interface has no mute option. It takes about 3 seconds to
 * fade-in on my PCM20. busy_wait() handles it great now...     Robert
 */

static int busy_wait(void)
{
        #define MINTIME 500
        long timeout;
        unsigned char byte;

        for (timeout = 1; timeout <= MINTIME+30; timeout++) {
                if (((byte=inb(BUSY_REGISTER)) & 1) == 0) {
                        if (timeout >= MINTIME)
                                printk(KERN_DEBUG "aci: Got READYFLAG in round %ld.\n", timeout-MINTIME);
                        return byte;
                }
                if (timeout >= MINTIME) {
                        long out=10*HZ;
                        switch (timeout-MINTIME) {
                        case 0 ... 9:
                                out /= 10;
                        case 10 ... 19:
                                out /= 10;
                        case 20 ... 30:
                                out /= 10;
                        default:
                                set_current_state(TASK_UNINTERRUPTIBLE);
                                schedule_timeout(out);
                                break;
                        }
                }
        }
        printk(KERN_WARNING "aci: busy_wait() time out.\n");
        return -EBUSY;
}

/* The four ACI command types are fucked up. [-:
 * implied is: 1w      - special case for INIT
 * write   is: 2w1r
 * read    is: x(1w1r) where x is 1 or 2 (1 CHECK_SIG, 1 CHECK_STER,
 *                                        1 VERSION, 2 IDCODE)
 *  the command is only in the first write, rest is protocol overhead
 *
 * indexed is technically a write and used for STATUS
 * and the special case for TUNE is: 3w1r
 * 
 * Here the new general sheme: TUNE --> aci_rw_cmd(x,  y,  z)
 *                indexed and write --> aci_rw_cmd(x,  y, -1)
 *           implied and read (x=1) --> aci_rw_cmd(x, -1, -1)
 *
 * Read (x>=2) is not implemented (only used during initialization).
 * Use aci_idcode[2] and aci_version...                    Robert
 */

/* Some notes for error detection: theoretically it is possible.
 * But it doubles the I/O-traffic from ww(r) to wwwrw(r) in the normal 
 * case and doesn't seem to be designed for that...        Robert
 */

static inline int aci_rawwrite(unsigned char byte)
{
        if (busy_wait() >= 0) {
#ifdef DEBUG
                printk(KERN_DEBUG "aci_rawwrite(%d)\n", byte);
#endif
                outb(byte, COMMAND_REGISTER);
                return 0;
        } else
                return -EBUSY;
}

static inline int aci_rawread(void)
{
        unsigned char byte;

        if (busy_wait() >= 0) {
                byte=inb(STATUS_REGISTER);
#ifdef DEBUG
                printk(KERN_DEBUG "%d = aci_rawread()\n", byte);
#endif
                return byte;
        } else
                return -EBUSY;
}


int aci_rw_cmd(int write1, int write2, int write3)
{
        int write[] = {write1, write2, write3};
        int read = -EINTR, i;

        if (mutex_lock_interruptible(&aci_mutex))
                goto out;

        for (i=0; i<3; i++) {
                if (write[i]< 0 || write[i] > 255)
                        break;
                else {
                        read = aci_rawwrite(write[i]);
                        if (read < 0)
                                goto out_up;
                }
                
        }
        
        read = aci_rawread();
out_up: mutex_unlock(&aci_mutex);
out:    return read;
}

EXPORT_SYMBOL(aci_rw_cmd);

static int setvolume(int __user *arg, 
                     unsigned char left_index, unsigned char right_index)
{
        int vol, ret, uservol, buf;

        __get_user(uservol, arg);

        /* left channel */
        vol = uservol & 0xff;
        if (vol > 100)
                vol = 100;
        vol = SCALE(100, 0x20, vol);
        if ((buf=aci_write_cmd(left_index, 0x20 - vol))<0)
                return buf;
        ret = SCALE(0x20, 100, vol);


        /* right channel */
        vol = (uservol >> 8) & 0xff;
        if (vol > 100)
                vol = 100;
        vol = SCALE(100, 0x20, vol);
        if ((buf=aci_write_cmd(right_index, 0x20 - vol))<0)
                return buf;
        ret |= SCALE(0x20, 100, vol) << 8;
 
        __put_user(ret, arg);

        return 0;
}

static int getvolume(int __user *arg,
                     unsigned char left_index, unsigned char right_index)
{
        int vol;
        int buf;

        /* left channel */
        if ((buf=aci_indexed_cmd(ACI_STATUS, left_index))<0)
                return buf;
        vol = SCALE(0x20, 100, buf < 0x20 ? 0x20-buf : 0);
        
        /* right channel */
        if ((buf=aci_indexed_cmd(ACI_STATUS, right_index))<0)
                return buf;
        vol |= SCALE(0x20, 100, buf < 0x20 ? 0x20-buf : 0) << 8;

        __put_user(vol, arg);

        return 0;
}


/* The equalizer is somewhat strange on the ACI. From -12dB to +12dB
 * write:  0xff..down.to..0x80==0x00..up.to..0x7f
 */

static inline unsigned int eq_oss2aci(unsigned int vol)
{
        int boost=0;
        unsigned int ret;

        if (vol > 100)
                vol = 100;
        if (vol > 50) {
                vol -= 51;
                boost=1;
        }
        if (boost)
                ret=SCALE(49, 0x7e, vol)+1;
        else
                ret=0xff - SCALE(50, 0x7f, vol);
        return ret;
}

static inline unsigned int eq_aci2oss(unsigned int vol)
{
        if (vol < 0x80)
                return SCALE(0x7f, 50, vol) + 50;
        else
                return SCALE(0x7f, 50, 0xff-vol);
}


static int setequalizer(int __user *arg, 
                        unsigned char left_index, unsigned char right_index)
{
        int buf;
        unsigned int vol;

        __get_user(vol, arg);

        /* left channel */
        if ((buf=aci_write_cmd(left_index, eq_oss2aci(vol & 0xff)))<0)
                return buf;

        /* right channel */
        if ((buf=aci_write_cmd(right_index, eq_oss2aci((vol>>8) & 0xff)))<0)
                return buf;

        /* the ACI equalizer is more precise */
        return 0;
}

static int getequalizer(int __user *arg,
                        unsigned char left_index, unsigned char right_index)
{
        int buf;
        unsigned int vol;

        /* left channel */
        if ((buf=aci_indexed_cmd(ACI_STATUS, left_index))<0)
                return buf;
        vol = eq_aci2oss(buf);
        
        /* right channel */
        if ((buf=aci_indexed_cmd(ACI_STATUS, right_index))<0)
                return buf;
        vol |= eq_aci2oss(buf) << 8;

        __put_user(vol, arg);

        return 0;
}

static int aci_mixer_ioctl (int dev, unsigned int cmd, void __user * arg)
{
        int vol, buf;
        int __user *p = arg;

        switch (cmd) {
        case SOUND_MIXER_WRITE_VOLUME:
                return setvolume(p, 0x01, 0x00);
        case SOUND_MIXER_WRITE_CD:
                return setvolume(p, 0x3c, 0x34);
        case SOUND_MIXER_WRITE_MIC:
                return setvolume(p, 0x38, 0x30);
        case SOUND_MIXER_WRITE_LINE:
                return setvolume(p, 0x39, 0x31);
        case SOUND_MIXER_WRITE_SYNTH:
                return setvolume(p, 0x3b, 0x33);
        case SOUND_MIXER_WRITE_PCM:
                return setvolume(p, 0x3a, 0x32);
        case MIXER_WRITE(SOUND_MIXER_RADIO): /* fall through */
        case SOUND_MIXER_WRITE_LINE1:  /* AUX1 or radio */
                return setvolume(p, 0x3d, 0x35);
        case SOUND_MIXER_WRITE_LINE2:  /* AUX2 */
                return setvolume(p, 0x3e, 0x36);
        case SOUND_MIXER_WRITE_BASS:   /* set band one and two */
                if (aci_idcode[1]=='C') {
                        if ((buf=setequalizer(p, 0x48, 0x40)) || 
                            (buf=setequalizer(p, 0x49, 0x41)));
                        return buf;
                }
                break;
        case SOUND_MIXER_WRITE_TREBLE: /* set band six and seven */
                if (aci_idcode[1]=='C') {
                        if ((buf=setequalizer(p, 0x4d, 0x45)) || 
                            (buf=setequalizer(p, 0x4e, 0x46)));
                        return buf;
                }
                break;
        case SOUND_MIXER_WRITE_IGAIN:  /* MIC pre-amp */
                if (aci_idcode[1]=='B' || aci_idcode[1]=='C') {
                        __get_user(vol, p);
                        vol = vol & 0xff;
                        if (vol > 100)
                                vol = 100;
                        vol = SCALE(100, 3, vol);
                        if ((buf=aci_write_cmd(ACI_WRITE_IGAIN, vol))<0)
                                return buf;
                        aci_micpreamp = vol;
                        vol = SCALE(3, 100, vol);
                        vol |= (vol << 8);
                        __put_user(vol, p);
                        return 0;
                }
                break;
        case SOUND_MIXER_WRITE_OGAIN:  /* Power-amp/line-out level */
                if (aci_idcode[1]=='A' || aci_idcode[1]=='B') {
                        __get_user(buf, p);
                        buf = buf & 0xff;
                        if (buf > 50)
                                vol = 1;
                        else
                                vol = 0;
                        if ((buf=aci_write_cmd(ACI_SET_POWERAMP, vol))<0)
                                return buf;
                        aci_amp = vol;
                        if (aci_amp)
                                buf = (100 || 100<<8);
                        else
                                buf = 0;
                        __put_user(buf, p);
                        return 0;
                }
                break;
        case SOUND_MIXER_WRITE_RECSRC:
                /* handle solo mode control */
                __get_user(buf, p);
                /* unset solo when RECSRC for PCM is requested */
                if (aci_idcode[1]=='B' || aci_idcode[1]=='C') {
                        vol = !(buf & SOUND_MASK_PCM);
                        if ((buf=aci_write_cmd(ACI_SET_SOLOMODE, vol))<0)
                                return buf;
                        aci_solo = vol;
                }
                buf = (SOUND_MASK_CD| SOUND_MASK_MIC| SOUND_MASK_LINE|
                       SOUND_MASK_SYNTH| SOUND_MASK_LINE2);
                if (aci_idcode[1] == 'C') /* PCM20 radio */
                        buf |= SOUND_MASK_RADIO;
                else
                        buf |= SOUND_MASK_LINE1;
                if (!aci_solo)
                        buf |= SOUND_MASK_PCM;
                __put_user(buf, p);
                return 0;
        case SOUND_MIXER_READ_DEVMASK:
                buf = (SOUND_MASK_VOLUME | SOUND_MASK_CD    |
                       SOUND_MASK_MIC    | SOUND_MASK_LINE  |
                       SOUND_MASK_SYNTH  | SOUND_MASK_PCM   |
                       SOUND_MASK_LINE2);
                switch (aci_idcode[1]) {
                case 'C': /* PCM20 radio */
                        buf |= (SOUND_MASK_RADIO | SOUND_MASK_IGAIN |
                                SOUND_MASK_BASS  | SOUND_MASK_TREBLE);
                        break;
                case 'B': /* PCM12 */
                        buf |= (SOUND_MASK_LINE1 | SOUND_MASK_IGAIN |
                                SOUND_MASK_OGAIN);
                        break;
                case 'A': /* PCM1-pro */
                        buf |= (SOUND_MASK_LINE1 | SOUND_MASK_OGAIN);
                        break;
                default:
                        buf |= SOUND_MASK_LINE1;
                }
                __put_user(buf, p);
                return 0;
        case SOUND_MIXER_READ_STEREODEVS:
                buf = (SOUND_MASK_VOLUME | SOUND_MASK_CD    |
                       SOUND_MASK_MIC    | SOUND_MASK_LINE  |
                       SOUND_MASK_SYNTH  | SOUND_MASK_PCM   |
                       SOUND_MASK_LINE2);
                switch (aci_idcode[1]) {
                case 'C': /* PCM20 radio */
                        buf |= (SOUND_MASK_RADIO |
                                SOUND_MASK_BASS  | SOUND_MASK_TREBLE);
                        break;
                default:
                        buf |= SOUND_MASK_LINE1;
                }
                __put_user(buf, p);
                return 0;
        case SOUND_MIXER_READ_RECMASK:
                buf = (SOUND_MASK_CD| SOUND_MASK_MIC| SOUND_MASK_LINE|
                       SOUND_MASK_SYNTH| SOUND_MASK_LINE2| SOUND_MASK_PCM);
                if (aci_idcode[1] == 'C') /* PCM20 radio */
                        buf |= SOUND_MASK_RADIO;
                else
                        buf |= SOUND_MASK_LINE1;

                __put_user(buf, p);
                return 0;
        case SOUND_MIXER_READ_RECSRC:
                buf = (SOUND_MASK_CD    | SOUND_MASK_MIC   | SOUND_MASK_LINE  |
                       SOUND_MASK_SYNTH | SOUND_MASK_LINE2);
                /* do we need aci_solo or can I get it from the ACI? */
                switch (aci_idcode[1]) {
                case 'B': /* PCM12 */
                case 'C': /* PCM20 radio */
                        if (aci_version >= 0xb0) {
                                if ((vol=aci_rw_cmd(ACI_STATUS,
                                                    ACI_S_GENERAL, -1))<0)
                                        return vol;
                                if (vol & 0x20)
                                        buf |= SOUND_MASK_PCM;
                        }
                        else
                                if (!aci_solo)
                                        buf |= SOUND_MASK_PCM;
                        break;
                default:
                        buf |= SOUND_MASK_PCM;
                }
                if (aci_idcode[1] == 'C') /* PCM20 radio */
                        buf |= SOUND_MASK_RADIO;
                else
                        buf |= SOUND_MASK_LINE1;

                __put_user(buf, p);
                return 0;
        case SOUND_MIXER_READ_CAPS:
                __put_user(0, p);
                return 0;
        case SOUND_MIXER_READ_VOLUME:
                return getvolume(p, 0x04, 0x03);
        case SOUND_MIXER_READ_CD:
                return getvolume(p, 0x0a, 0x09);
        case SOUND_MIXER_READ_MIC:
                return getvolume(p, 0x06, 0x05);
        case SOUND_MIXER_READ_LINE:
                return getvolume(p, 0x08, 0x07);
        case SOUND_MIXER_READ_SYNTH:
                return getvolume(p, 0x0c, 0x0b);
        case SOUND_MIXER_READ_PCM:
                return getvolume(p, 0x0e, 0x0d);
        case MIXER_READ(SOUND_MIXER_RADIO): /* fall through */
        case SOUND_MIXER_READ_LINE1:  /* AUX1 */
                return getvolume(p, 0x11, 0x10);
        case SOUND_MIXER_READ_LINE2:  /* AUX2 */
                return getvolume(p, 0x13, 0x12);
        case SOUND_MIXER_READ_BASS:   /* get band one */
                if (aci_idcode[1]=='C') {
                        return getequalizer(p, 0x23, 0x22);
                }
                break;
        case SOUND_MIXER_READ_TREBLE: /* get band seven */
                if (aci_idcode[1]=='C') {
                        return getequalizer(p, 0x2f, 0x2e);
                }
                break;
        case SOUND_MIXER_READ_IGAIN:  /* MIC pre-amp */
                if (aci_idcode[1]=='B' || aci_idcode[1]=='C') {
                        /* aci_micpreamp or ACI? */
                        if (aci_version >= 0xb0) {
                                if ((buf=aci_indexed_cmd(ACI_STATUS,
                                                         ACI_S_READ_IGAIN))<0)
                                        return buf;
                        }
                        else
                                buf=aci_micpreamp;
                        vol = SCALE(3, 100, buf <= 3 ? buf : 3);
                        vol |= vol << 8;
                        __put_user(vol, p);
                        return 0;
                }
                break;
        case SOUND_MIXER_READ_OGAIN:
                if (aci_amp)
                        buf = (100 || 100<<8);
                else
                        buf = 0;
                __put_user(buf, p);
                return 0;
        }
        return -EINVAL;
}

static struct mixer_operations aci_mixer_operations =
{
        .owner = THIS_MODULE,
        .id    = "ACI",
        .ioctl = aci_mixer_ioctl
};

/*
 * There is also an internal mixer in the codec (CS4231A or AD1845),
 * that deserves no purpose in an ACI based system which uses an
 * external ACI controlled stereo mixer. Make sure that this codec
 * mixer has the AUX1 input selected as the recording source, that the
 * input gain is set near maximum and that the other channels going
 * from the inputs to the codec output are muted.
 */

static int __init attach_aci(void)
{
        char *boardname;
        int i, rc = -EBUSY;

        mutex_init(&aci_mutex);

        outb(0xE3, 0xf8f); /* Write MAD16 password */
        aci_port = (inb(0xf90) & 0x10) ?
                0x344: 0x354; /* Get aci_port from MC4_PORT */

        if (!request_region(aci_port, 3, "sound mixer (ACI)")) {
                printk(KERN_NOTICE
                       "aci: I/O area 0x%03x-0x%03x already used.\n",
                       aci_port, aci_port+2);
                goto out;
        }

        /* force ACI into a known state */
        rc = -EFAULT;
        for (i=0; i<3; i++)
                if (aci_rw_cmd(ACI_ERROR_OP, -1, -1)<0)
                        goto out_release_region;

        /* official this is one aci read call: */
        rc = -EFAULT;
        if ((aci_idcode[0]=aci_rw_cmd(ACI_READ_IDCODE, -1, -1))<0 ||
            (aci_idcode[1]=aci_rw_cmd(ACI_READ_IDCODE, -1, -1))<0) {
                printk(KERN_ERR "aci: Failed to read idcode on 0x%03x.\n",
                       aci_port);
                goto out_release_region;
        }

        if ((aci_version=aci_rw_cmd(ACI_READ_VERSION, -1, -1))<0) {
                printk(KERN_ERR "aci: Failed to read version on 0x%03x.\n",
                       aci_port);
                goto out_release_region;
        }

        if (aci_idcode[0] == 'm') {
                /* It looks like a miro sound card. */
                switch (aci_idcode[1]) {
                case 'A':
                        boardname = "PCM1 pro / early PCM12";
                        break;
                case 'B':
                        boardname = "PCM12";
                        break;
                case 'C':
                        boardname = "PCM20 radio";
                        break;
                default:
                        boardname = "unknown miro";
                }
        } else {
                printk(KERN_WARNING "aci: Warning: unsupported card! - "
                       "no hardware, no specs...\n");
                boardname = "unknown Cardinal Technologies";
        }

        printk(KERN_INFO "<ACI 0x%02x, id %02x/%02x \"%c/%c\", (%s)> at 0x%03x\n",
               aci_version,
               aci_idcode[0], aci_idcode[1],
               aci_idcode[0], aci_idcode[1],
               boardname, aci_port);

        rc = -EBUSY;
        if (reset) {
                /* first write()s after reset fail with my PCM20 */
                if (aci_rw_cmd(ACI_INIT, -1, -1)<0 ||
                    aci_rw_cmd(ACI_ERROR_OP, ACI_ERROR_OP, ACI_ERROR_OP)<0 ||
                    aci_rw_cmd(ACI_ERROR_OP, ACI_ERROR_OP, ACI_ERROR_OP)<0)
                        goto out_release_region;
        }

        /* the PCM20 is muted after reset (and reboot) */
        if (aci_rw_cmd(ACI_SET_MUTE, 0x00, -1)<0)
                goto out_release_region;

        if (ide>=0)
                if (aci_rw_cmd(ACI_SET_IDE, !ide, -1)<0)
                        goto out_release_region;
        
        if (wss>=0 && aci_idcode[1]=='A')
                if (aci_rw_cmd(ACI_SET_WSS, !!wss, -1)<0)
                        goto out_release_region;

        mixer_device = sound_install_mixer(MIXER_DRIVER_VERSION, boardname,
                                           &aci_mixer_operations,
                                           sizeof(aci_mixer_operations), NULL);
        rc = 0;
        if (mixer_device < 0) {
                printk(KERN_ERR "aci: Failed to install mixer.\n");
                rc = mixer_device;
                goto out_release_region;
        } /* else Maybe initialize the CS4231A mixer here... */
out:    return rc;
out_release_region:
        release_region(aci_port, 3);
        goto out;
}

static void __exit unload_aci(void)
{
        sound_unload_mixerdev(mixer_device);
        release_region(aci_port, 3);
}

module_init(attach_aci);
module_exit(unload_aci);
MODULE_LICENSE("GPL");