2 * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
4 * This program is free software; you can distribute it and/or modify it
5 * under the terms of the GNU General Public License (Version 2) as
6 * published by the Free Software Foundation.
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
13 * You should have received a copy of the GNU General Public License along
14 * with this program; if not, write to the Free Software Foundation, Inc.,
15 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
21 * Provides support for loading a MIPS SP program on VPE1.
22 * The SP enviroment is rather simple, no tlb's. It needs to be relocatable
23 * (or partially linked). You should initialise your stack in the startup
24 * code. This loader looks for the symbol __start and sets up
25 * execution to resume from there. The MIPS SDE kit contains suitable examples.
27 * To load and run, simply cat a SP 'program file' to /dev/vpe1.
28 * i.e cat spapp >/dev/vpe1.
30 #include <linux/kernel.h>
31 #include <linux/device.h>
32 #include <linux/module.h>
34 #include <linux/init.h>
35 #include <asm/uaccess.h>
36 #include <linux/slab.h>
37 #include <linux/list.h>
38 #include <linux/vmalloc.h>
39 #include <linux/elf.h>
40 #include <linux/seq_file.h>
41 #include <linux/syscalls.h>
42 #include <linux/moduleloader.h>
43 #include <linux/interrupt.h>
44 #include <linux/poll.h>
45 #include <linux/bootmem.h>
46 #include <asm/mipsregs.h>
47 #include <asm/mipsmtregs.h>
48 #include <asm/cacheflush.h>
49 #include <asm/atomic.h>
51 #include <asm/mips_mt.h>
52 #include <asm/processor.h>
53 #include <asm/system.h>
57 typedef void *vpe_handle;
59 #ifndef ARCH_SHF_SMALL
60 #define ARCH_SHF_SMALL 0
63 /* If this is set, the section belongs in the init part of the module */
64 #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
67 * The number of TCs and VPEs physically available on the core
69 static int hw_tcs, hw_vpes;
70 static char module_name[] = "vpe";
72 static const int minor = 1; /* fixed for now */
74 #ifdef CONFIG_MIPS_APSP_KSPD
75 static struct kspd_notifications kspd_events;
76 static int kspd_events_reqd = 0;
79 /* grab the likely amount of memory we will need. */
80 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
81 #define P_SIZE (2 * 1024 * 1024)
83 /* add an overhead to the max kmalloc size for non-striped symbols/etc */
84 #define P_SIZE (256 * 1024)
87 extern unsigned long physical_memsize;
90 #define VPE_PATH_MAX 256
106 enum vpe_state state;
108 /* (device) minor associated with this vpe */
111 /* elfloader stuff */
116 unsigned int uid, gid;
117 char cwd[VPE_PATH_MAX];
119 unsigned long __start;
121 /* tc's associated with this vpe */
124 /* The list of vpe's */
125 struct list_head list;
127 /* shared symbol address */
130 /* the list of who wants to know when something major happens */
131 struct list_head notify;
140 struct vpe *pvpe; /* parent VPE */
141 struct list_head tc; /* The list of TC's with this VPE */
142 struct list_head list; /* The global list of tc's */
146 /* Virtual processing elements */
147 struct list_head vpe_list;
149 /* Thread contexts */
150 struct list_head tc_list;
152 .vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
153 .tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
156 static void release_progmem(void *ptr);
157 extern void save_gp_address(unsigned int secbase, unsigned int rel);
159 /* get the vpe associated with this minor */
160 struct vpe *get_vpe(int minor)
167 list_for_each_entry(v, &vpecontrol.vpe_list, list) {
168 if (v->minor == minor)
175 /* get the vpe associated with this minor */
176 struct tc *get_tc(int index)
180 list_for_each_entry(t, &vpecontrol.tc_list, list) {
181 if (t->index == index)
188 struct tc *get_tc_unused(void)
192 list_for_each_entry(t, &vpecontrol.tc_list, list) {
193 if (t->state == TC_STATE_UNUSED)
200 /* allocate a vpe and associate it with this minor (or index) */
201 struct vpe *alloc_vpe(int minor)
205 if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) {
209 INIT_LIST_HEAD(&v->tc);
210 list_add_tail(&v->list, &vpecontrol.vpe_list);
212 INIT_LIST_HEAD(&v->notify);
217 /* allocate a tc. At startup only tc0 is running, all other can be halted. */
218 struct tc *alloc_tc(int index)
222 if ((tc = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL)
225 INIT_LIST_HEAD(&tc->tc);
227 list_add_tail(&tc->list, &vpecontrol.tc_list);
233 /* clean up and free everything */
234 void release_vpe(struct vpe *v)
242 void dump_mtregs(void)
246 val = read_c0_config3();
247 printk("config3 0x%lx MT %ld\n", val,
248 (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT);
250 val = read_c0_mvpcontrol();
251 printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val,
252 (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT,
253 (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT,
254 (val & MVPCONTROL_EVP));
256 val = read_c0_mvpconf0();
257 printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val,
258 (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT,
259 val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT);
262 /* Find some VPE program space */
263 static void *alloc_progmem(unsigned long len)
267 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
269 * This means you must tell Linux to use less memory than you
270 * physically have, for example by passing a mem= boot argument.
272 addr = pfn_to_kaddr(max_low_pfn);
273 memset(addr, 0, len);
275 /* simple grab some mem for now */
276 addr = kzalloc(len, GFP_KERNEL);
282 static void release_progmem(void *ptr)
284 #ifndef CONFIG_MIPS_VPE_LOADER_TOM
289 /* Update size with this section: return offset. */
290 static long get_offset(unsigned long *size, Elf_Shdr * sechdr)
294 ret = ALIGN(*size, sechdr->sh_addralign ? : 1);
295 *size = ret + sechdr->sh_size;
299 /* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
300 might -- code, read-only data, read-write data, small data. Tally
301 sizes, and place the offsets into sh_entsize fields: high bit means it
303 static void layout_sections(struct module *mod, const Elf_Ehdr * hdr,
304 Elf_Shdr * sechdrs, const char *secstrings)
306 static unsigned long const masks[][2] = {
307 /* NOTE: all executable code must be the first section
308 * in this array; otherwise modify the text_size
309 * finder in the two loops below */
310 {SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL},
311 {SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL},
312 {SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL},
313 {ARCH_SHF_SMALL | SHF_ALLOC, 0}
317 for (i = 0; i < hdr->e_shnum; i++)
318 sechdrs[i].sh_entsize = ~0UL;
320 for (m = 0; m < ARRAY_SIZE(masks); ++m) {
321 for (i = 0; i < hdr->e_shnum; ++i) {
322 Elf_Shdr *s = &sechdrs[i];
324 // || strncmp(secstrings + s->sh_name, ".init", 5) == 0)
325 if ((s->sh_flags & masks[m][0]) != masks[m][0]
326 || (s->sh_flags & masks[m][1])
327 || s->sh_entsize != ~0UL)
329 s->sh_entsize = get_offset(&mod->core_size, s);
333 mod->core_text_size = mod->core_size;
339 /* from module-elf32.c, but subverted a little */
342 struct mips_hi16 *next;
347 static struct mips_hi16 *mips_hi16_list;
348 static unsigned int gp_offs, gp_addr;
350 static int apply_r_mips_none(struct module *me, uint32_t *location,
356 static int apply_r_mips_gprel16(struct module *me, uint32_t *location,
361 if( !(*location & 0xffff) ) {
362 rel = (int)v - gp_addr;
365 /* .sbss + gp(relative) + offset */
367 rel = (int)(short)((int)v + gp_offs +
368 (int)(short)(*location & 0xffff) - gp_addr);
371 if( (rel > 32768) || (rel < -32768) ) {
372 printk(KERN_DEBUG "VPE loader: apply_r_mips_gprel16: "
373 "relative address 0x%x out of range of gp register\n",
378 *location = (*location & 0xffff0000) | (rel & 0xffff);
383 static int apply_r_mips_pc16(struct module *me, uint32_t *location,
387 rel = (((unsigned int)v - (unsigned int)location));
388 rel >>= 2; // because the offset is in _instructions_ not bytes.
389 rel -= 1; // and one instruction less due to the branch delay slot.
391 if( (rel > 32768) || (rel < -32768) ) {
392 printk(KERN_DEBUG "VPE loader: "
393 "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
397 *location = (*location & 0xffff0000) | (rel & 0xffff);
402 static int apply_r_mips_32(struct module *me, uint32_t *location,
410 static int apply_r_mips_26(struct module *me, uint32_t *location,
414 printk(KERN_DEBUG "VPE loader: apply_r_mips_26 "
415 " unaligned relocation\n");
420 * Not desperately convinced this is a good check of an overflow condition
421 * anyway. But it gets in the way of handling undefined weak symbols which
422 * we want to set to zero.
423 * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
425 * "module %s: relocation overflow\n",
431 *location = (*location & ~0x03ffffff) |
432 ((*location + (v >> 2)) & 0x03ffffff);
436 static int apply_r_mips_hi16(struct module *me, uint32_t *location,
442 * We cannot relocate this one now because we don't know the value of
443 * the carry we need to add. Save the information, and let LO16 do the
446 n = kmalloc(sizeof *n, GFP_KERNEL);
452 n->next = mips_hi16_list;
458 static int apply_r_mips_lo16(struct module *me, uint32_t *location,
461 unsigned long insnlo = *location;
462 Elf32_Addr val, vallo;
464 /* Sign extend the addend we extract from the lo insn. */
465 vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
467 if (mips_hi16_list != NULL) {
472 struct mips_hi16 *next;
476 * The value for the HI16 had best be the same.
479 printk(KERN_DEBUG "VPE loader: "
480 "apply_r_mips_lo16/hi16: \t"
481 "inconsistent value information\n");
486 * Do the HI16 relocation. Note that we actually don't
487 * need to know anything about the LO16 itself, except
488 * where to find the low 16 bits of the addend needed
492 val = ((insn & 0xffff) << 16) + vallo;
496 * Account for the sign extension that will happen in
499 val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
501 insn = (insn & ~0xffff) | val;
509 mips_hi16_list = NULL;
513 * Ok, we're done with the HI16 relocs. Now deal with the LO16.
516 insnlo = (insnlo & ~0xffff) | (val & 0xffff);
522 static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
524 [R_MIPS_NONE] = apply_r_mips_none,
525 [R_MIPS_32] = apply_r_mips_32,
526 [R_MIPS_26] = apply_r_mips_26,
527 [R_MIPS_HI16] = apply_r_mips_hi16,
528 [R_MIPS_LO16] = apply_r_mips_lo16,
529 [R_MIPS_GPREL16] = apply_r_mips_gprel16,
530 [R_MIPS_PC16] = apply_r_mips_pc16
533 static char *rstrs[] = {
534 [R_MIPS_NONE] = "MIPS_NONE",
535 [R_MIPS_32] = "MIPS_32",
536 [R_MIPS_26] = "MIPS_26",
537 [R_MIPS_HI16] = "MIPS_HI16",
538 [R_MIPS_LO16] = "MIPS_LO16",
539 [R_MIPS_GPREL16] = "MIPS_GPREL16",
540 [R_MIPS_PC16] = "MIPS_PC16"
543 int apply_relocations(Elf32_Shdr *sechdrs,
545 unsigned int symindex,
549 Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
556 for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
557 Elf32_Word r_info = rel[i].r_info;
559 /* This is where to make the change */
560 location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
562 /* This is the symbol it is referring to */
563 sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
564 + ELF32_R_SYM(r_info);
566 if (!sym->st_value) {
567 printk(KERN_DEBUG "%s: undefined weak symbol %s\n",
568 me->name, strtab + sym->st_name);
569 /* just print the warning, dont barf */
574 res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
576 char *r = rstrs[ELF32_R_TYPE(r_info)];
577 printk(KERN_WARNING "VPE loader: .text+0x%x "
578 "relocation type %s for symbol \"%s\" failed\n",
579 rel[i].r_offset, r ? r : "UNKNOWN",
580 strtab + sym->st_name);
588 void save_gp_address(unsigned int secbase, unsigned int rel)
590 gp_addr = secbase + rel;
591 gp_offs = gp_addr - (secbase & 0xffff0000);
593 /* end module-elf32.c */
597 /* Change all symbols so that sh_value encodes the pointer directly. */
598 static void simplify_symbols(Elf_Shdr * sechdrs,
599 unsigned int symindex,
601 const char *secstrings,
602 unsigned int nsecs, struct module *mod)
604 Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
605 unsigned long secbase, bssbase = 0;
606 unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
609 /* find the .bss section for COMMON symbols */
610 for (i = 0; i < nsecs; i++) {
611 if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0) {
612 bssbase = sechdrs[i].sh_addr;
617 for (i = 1; i < n; i++) {
618 switch (sym[i].st_shndx) {
620 /* Allocate space for the symbol in the .bss section.
621 st_value is currently size.
622 We want it to have the address of the symbol. */
624 size = sym[i].st_value;
625 sym[i].st_value = bssbase;
631 /* Don't need to do anything */
638 case SHN_MIPS_SCOMMON:
639 printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON "
640 "symbol <%s> st_shndx %d\n", strtab + sym[i].st_name,
646 secbase = sechdrs[sym[i].st_shndx].sh_addr;
648 if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0) {
649 save_gp_address(secbase, sym[i].st_value);
652 sym[i].st_value += secbase;
658 #ifdef DEBUG_ELFLOADER
659 static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex,
660 const char *strtab, struct module *mod)
662 Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
663 unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
665 printk(KERN_DEBUG "dump_elfsymbols: n %d\n", n);
666 for (i = 1; i < n; i++) {
667 printk(KERN_DEBUG " i %d name <%s> 0x%x\n", i,
668 strtab + sym[i].st_name, sym[i].st_value);
673 /* We are prepared so configure and start the VPE... */
674 static int vpe_run(struct vpe * v)
676 unsigned long flags, val, dmt_flag;
677 struct vpe_notifications *n;
678 unsigned int vpeflags;
681 /* check we are the Master VPE */
682 local_irq_save(flags);
683 val = read_c0_vpeconf0();
684 if (!(val & VPECONF0_MVP)) {
686 "VPE loader: only Master VPE's are allowed to configure MT\n");
687 local_irq_restore(flags);
695 if (!list_empty(&v->tc)) {
696 if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
699 local_irq_restore(flags);
702 "VPE loader: TC %d is already in use.\n",
709 local_irq_restore(flags);
712 "VPE loader: No TC's associated with VPE %d\n",
718 /* Put MVPE's into 'configuration state' */
719 set_c0_mvpcontrol(MVPCONTROL_VPC);
723 /* should check it is halted, and not activated */
724 if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) {
727 local_irq_restore(flags);
729 printk(KERN_WARNING "VPE loader: TC %d is already active!\n",
735 /* Write the address we want it to start running from in the TCPC register. */
736 write_tc_c0_tcrestart((unsigned long)v->__start);
737 write_tc_c0_tccontext((unsigned long)0);
740 * Mark the TC as activated, not interrupt exempt and not dynamically
743 val = read_tc_c0_tcstatus();
744 val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A;
745 write_tc_c0_tcstatus(val);
747 write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
750 * The sde-kit passes 'memsize' to __start in $a3, so set something
751 * here... Or set $a3 to zero and define DFLT_STACK_SIZE and
752 * DFLT_HEAP_SIZE when you compile your program
755 mttgpr(7, physical_memsize);
759 * bind the TC to VPE 1 as late as possible so we only have the final
760 * VPE registers to set up, and so an EJTAG probe can trigger on it
762 write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1);
764 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA));
766 back_to_back_c0_hazard();
768 /* Set up the XTC bit in vpeconf0 to point at our tc */
769 write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC))
770 | (t->index << VPECONF0_XTC_SHIFT));
772 back_to_back_c0_hazard();
774 /* enable this VPE */
775 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
777 /* clear out any left overs from a previous program */
778 write_vpe_c0_status(0);
779 write_vpe_c0_cause(0);
781 /* take system out of configuration state */
782 clear_c0_mvpcontrol(MVPCONTROL_VPC);
785 * SMTC/SMVP kernels manage VPE enable independently,
786 * but uniprocessor kernels need to turn it on, even
787 * if that wasn't the pre-dvpe() state.
795 local_irq_restore(flags);
797 list_for_each_entry(n, &v->notify, list)
803 static int find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs,
804 unsigned int symindex, const char *strtab,
807 Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
808 unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
810 for (i = 1; i < n; i++) {
811 if (strcmp(strtab + sym[i].st_name, "__start") == 0) {
812 v->__start = sym[i].st_value;
815 if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0) {
816 v->shared_ptr = (void *)sym[i].st_value;
820 if ( (v->__start == 0) || (v->shared_ptr == NULL))
827 * Allocates a VPE with some program code space(the load address), copies the
828 * contents of the program (p)buffer performing relocatations/etc, free's it
831 static int vpe_elfload(struct vpe * v)
836 char *secstrings, *strtab = NULL;
837 unsigned int len, i, symindex = 0, strindex = 0, relocate = 0;
838 struct module mod; // so we can re-use the relocations code
840 memset(&mod, 0, sizeof(struct module));
841 strcpy(mod.name, "VPE loader");
843 hdr = (Elf_Ehdr *) v->pbuffer;
846 /* Sanity checks against insmoding binaries or wrong arch,
848 if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
849 || (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC)
850 || !elf_check_arch(hdr)
851 || hdr->e_shentsize != sizeof(*sechdrs)) {
853 "VPE loader: program wrong arch or weird elf version\n");
858 if (hdr->e_type == ET_REL)
861 if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) {
862 printk(KERN_ERR "VPE loader: program length %u truncated\n",
868 /* Convenience variables */
869 sechdrs = (void *)hdr + hdr->e_shoff;
870 secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
871 sechdrs[0].sh_addr = 0;
873 /* And these should exist, but gcc whinges if we don't init them */
874 symindex = strindex = 0;
877 for (i = 1; i < hdr->e_shnum; i++) {
878 if (sechdrs[i].sh_type != SHT_NOBITS
879 && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) {
880 printk(KERN_ERR "VPE program length %u truncated\n",
885 /* Mark all sections sh_addr with their address in the
887 sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
889 /* Internal symbols and strings. */
890 if (sechdrs[i].sh_type == SHT_SYMTAB) {
892 strindex = sechdrs[i].sh_link;
893 strtab = (char *)hdr + sechdrs[strindex].sh_offset;
896 layout_sections(&mod, hdr, sechdrs, secstrings);
899 v->load_addr = alloc_progmem(mod.core_size);
903 pr_info("VPE loader: loading to %p\n", v->load_addr);
906 for (i = 0; i < hdr->e_shnum; i++) {
909 if (!(sechdrs[i].sh_flags & SHF_ALLOC))
912 dest = v->load_addr + sechdrs[i].sh_entsize;
914 if (sechdrs[i].sh_type != SHT_NOBITS)
915 memcpy(dest, (void *)sechdrs[i].sh_addr,
917 /* Update sh_addr to point to copy in image. */
918 sechdrs[i].sh_addr = (unsigned long)dest;
920 printk(KERN_DEBUG " section sh_name %s sh_addr 0x%x\n",
921 secstrings + sechdrs[i].sh_name, sechdrs[i].sh_addr);
924 /* Fix up syms, so that st_value is a pointer to location. */
925 simplify_symbols(sechdrs, symindex, strtab, secstrings,
928 /* Now do relocations. */
929 for (i = 1; i < hdr->e_shnum; i++) {
930 const char *strtab = (char *)sechdrs[strindex].sh_addr;
931 unsigned int info = sechdrs[i].sh_info;
933 /* Not a valid relocation section? */
934 if (info >= hdr->e_shnum)
937 /* Don't bother with non-allocated sections */
938 if (!(sechdrs[info].sh_flags & SHF_ALLOC))
941 if (sechdrs[i].sh_type == SHT_REL)
942 err = apply_relocations(sechdrs, strtab, symindex, i,
944 else if (sechdrs[i].sh_type == SHT_RELA)
945 err = apply_relocate_add(sechdrs, strtab, symindex, i,
952 struct elf_phdr *phdr = (struct elf_phdr *) ((char *)hdr + hdr->e_phoff);
954 for (i = 0; i < hdr->e_phnum; i++) {
955 if (phdr->p_type == PT_LOAD) {
956 memcpy((void *)phdr->p_paddr,
957 (char *)hdr + phdr->p_offset,
959 memset((void *)phdr->p_paddr + phdr->p_filesz,
960 0, phdr->p_memsz - phdr->p_filesz);
965 for (i = 0; i < hdr->e_shnum; i++) {
966 /* Internal symbols and strings. */
967 if (sechdrs[i].sh_type == SHT_SYMTAB) {
969 strindex = sechdrs[i].sh_link;
970 strtab = (char *)hdr + sechdrs[strindex].sh_offset;
972 /* mark the symtab's address for when we try to find the
974 sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
979 /* make sure it's physically written out */
980 flush_icache_range((unsigned long)v->load_addr,
981 (unsigned long)v->load_addr + v->len);
983 if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
984 if (v->__start == 0) {
985 printk(KERN_WARNING "VPE loader: program does not contain "
986 "a __start symbol\n");
990 if (v->shared_ptr == NULL)
991 printk(KERN_WARNING "VPE loader: "
992 "program does not contain vpe_shared symbol.\n"
993 " Unable to use AMVP (AP/SP) facilities.\n");
996 printk(" elf loaded\n");
1000 static void cleanup_tc(struct tc *tc)
1002 unsigned long flags;
1003 unsigned int mtflags, vpflags;
1006 local_irq_save(flags);
1009 /* Put MVPE's into 'configuration state' */
1010 set_c0_mvpcontrol(MVPCONTROL_VPC);
1013 tmp = read_tc_c0_tcstatus();
1015 /* mark not allocated and not dynamically allocatable */
1016 tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
1017 tmp |= TCSTATUS_IXMT; /* interrupt exempt */
1018 write_tc_c0_tcstatus(tmp);
1020 write_tc_c0_tchalt(TCHALT_H);
1023 /* bind it to anything other than VPE1 */
1024 // write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
1026 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1029 local_irq_restore(flags);
1032 static int getcwd(char *buff, int size)
1034 mm_segment_t old_fs;
1040 ret = sys_getcwd(buff, size);
1047 /* checks VPE is unused and gets ready to load program */
1048 static int vpe_open(struct inode *inode, struct file *filp)
1050 enum vpe_state state;
1051 struct vpe_notifications *not;
1055 if (minor != iminor(inode)) {
1056 /* assume only 1 device at the moment. */
1057 printk(KERN_WARNING "VPE loader: only vpe1 is supported\n");
1061 if ((v = get_vpe(tclimit)) == NULL) {
1062 printk(KERN_WARNING "VPE loader: unable to get vpe\n");
1066 state = xchg(&v->state, VPE_STATE_INUSE);
1067 if (state != VPE_STATE_UNUSED) {
1068 printk(KERN_DEBUG "VPE loader: tc in use dumping regs\n");
1070 list_for_each_entry(not, &v->notify, list) {
1074 release_progmem(v->load_addr);
1075 cleanup_tc(get_tc(tclimit));
1078 /* this of-course trashes what was there before... */
1079 v->pbuffer = vmalloc(P_SIZE);
1081 v->load_addr = NULL;
1084 v->uid = filp->f_uid;
1085 v->gid = filp->f_gid;
1087 #ifdef CONFIG_MIPS_APSP_KSPD
1088 /* get kspd to tell us when a syscall_exit happens */
1089 if (!kspd_events_reqd) {
1090 kspd_notify(&kspd_events);
1096 ret = getcwd(v->cwd, VPE_PATH_MAX);
1098 printk(KERN_WARNING "VPE loader: open, getcwd returned %d\n", ret);
1100 v->shared_ptr = NULL;
1106 static int vpe_release(struct inode *inode, struct file *filp)
1112 v = get_vpe(tclimit);
1116 hdr = (Elf_Ehdr *) v->pbuffer;
1117 if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) == 0) {
1118 if (vpe_elfload(v) >= 0) {
1121 printk(KERN_WARNING "VPE loader: ELF load failed.\n");
1125 printk(KERN_WARNING "VPE loader: only elf files are supported\n");
1129 /* It's good to be able to run the SP and if it chokes have a look at
1130 the /dev/rt?. But if we reset the pointer to the shared struct we
1131 loose what has happened. So perhaps if garbage is sent to the vpe
1132 device, use it as a trigger for the reset. Hopefully a nice
1133 executable will be along shortly. */
1135 v->shared_ptr = NULL;
1137 // cleanup any temp buffers
1144 static ssize_t vpe_write(struct file *file, const char __user * buffer,
1145 size_t count, loff_t * ppos)
1150 if (iminor(file->f_path.dentry->d_inode) != minor)
1153 v = get_vpe(tclimit);
1157 if (v->pbuffer == NULL) {
1158 printk(KERN_ERR "VPE loader: no buffer for program\n");
1162 if ((count + v->len) > v->plen) {
1164 "VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
1168 count -= copy_from_user(v->pbuffer + v->len, buffer, count);
1176 static const struct file_operations vpe_fops = {
1177 .owner = THIS_MODULE,
1179 .release = vpe_release,
1183 /* module wrapper entry points */
1185 vpe_handle vpe_alloc(void)
1191 for (i = 1; i < MAX_VPES; i++) {
1192 if ((v = get_vpe(i)) != NULL) {
1193 v->state = VPE_STATE_INUSE;
1200 EXPORT_SYMBOL(vpe_alloc);
1202 /* start running from here */
1203 int vpe_start(vpe_handle vpe, unsigned long start)
1205 struct vpe *v = vpe;
1211 EXPORT_SYMBOL(vpe_start);
1213 /* halt it for now */
1214 int vpe_stop(vpe_handle vpe)
1216 struct vpe *v = vpe;
1218 unsigned int evpe_flags;
1220 evpe_flags = dvpe();
1222 if ((t = list_entry(v->tc.next, struct tc, tc)) != NULL) {
1225 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
1233 EXPORT_SYMBOL(vpe_stop);
1235 /* I've done with it thank you */
1236 int vpe_free(vpe_handle vpe)
1238 struct vpe *v = vpe;
1240 unsigned int evpe_flags;
1242 if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
1246 evpe_flags = dvpe();
1248 /* Put MVPE's into 'configuration state' */
1249 set_c0_mvpcontrol(MVPCONTROL_VPC);
1252 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
1255 write_tc_c0_tchalt(TCHALT_H);
1258 /* mark the TC unallocated */
1259 write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
1261 v->state = VPE_STATE_UNUSED;
1263 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1269 EXPORT_SYMBOL(vpe_free);
1271 void *vpe_get_shared(int index)
1275 if ((v = get_vpe(index)) == NULL)
1278 return v->shared_ptr;
1281 EXPORT_SYMBOL(vpe_get_shared);
1283 int vpe_getuid(int index)
1287 if ((v = get_vpe(index)) == NULL)
1293 EXPORT_SYMBOL(vpe_getuid);
1295 int vpe_getgid(int index)
1299 if ((v = get_vpe(index)) == NULL)
1305 EXPORT_SYMBOL(vpe_getgid);
1307 int vpe_notify(int index, struct vpe_notifications *notify)
1311 if ((v = get_vpe(index)) == NULL)
1314 list_add(¬ify->list, &v->notify);
1318 EXPORT_SYMBOL(vpe_notify);
1320 char *vpe_getcwd(int index)
1324 if ((v = get_vpe(index)) == NULL)
1330 EXPORT_SYMBOL(vpe_getcwd);
1332 #ifdef CONFIG_MIPS_APSP_KSPD
1333 static void kspd_sp_exit( int sp_id)
1335 cleanup_tc(get_tc(sp_id));
1339 static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
1340 const char *buf, size_t len)
1342 struct vpe *vpe = get_vpe(tclimit);
1343 struct vpe_notifications *not;
1345 list_for_each_entry(not, &vpe->notify, list) {
1349 release_progmem(vpe->load_addr);
1350 cleanup_tc(get_tc(tclimit));
1357 static ssize_t show_ntcs(struct device *cd, struct device_attribute *attr,
1360 struct vpe *vpe = get_vpe(tclimit);
1362 return sprintf(buf, "%d\n", vpe->ntcs);
1365 static ssize_t store_ntcs(struct device *dev, struct device_attribute *attr,
1366 const char *buf, size_t len)
1368 struct vpe *vpe = get_vpe(tclimit);
1372 new = simple_strtoul(buf, &endp, 0);
1376 if (new == 0 || new > (hw_tcs - tclimit))
1387 static struct device_attribute vpe_class_attributes[] = {
1388 __ATTR(kill, S_IWUSR, NULL, store_kill),
1389 __ATTR(ntcs, S_IRUGO | S_IWUSR, show_ntcs, store_ntcs),
1393 static void vpe_device_release(struct device *cd)
1398 struct class vpe_class = {
1400 .owner = THIS_MODULE,
1401 .dev_release = vpe_device_release,
1402 .dev_attrs = vpe_class_attributes,
1405 struct device vpe_device;
1407 static int __init vpe_module_init(void)
1409 unsigned int mtflags, vpflags;
1410 unsigned long flags, val;
1411 struct vpe *v = NULL;
1415 if (!cpu_has_mipsmt) {
1416 printk("VPE loader: not a MIPS MT capable processor\n");
1420 if (vpelimit == 0) {
1421 printk(KERN_WARNING "No VPEs reserved for AP/SP, not "
1422 "initializing VPE loader.\nPass maxvpes=<n> argument as "
1423 "kernel argument\n");
1429 printk(KERN_WARNING "No TCs reserved for AP/SP, not "
1430 "initializing VPE loader.\nPass maxtcs=<n> argument as "
1431 "kernel argument\n");
1436 major = register_chrdev(0, module_name, &vpe_fops);
1438 printk("VPE loader: unable to register character device\n");
1442 err = class_register(&vpe_class);
1444 printk(KERN_ERR "vpe_class registration failed\n");
1448 device_initialize(&vpe_device);
1449 vpe_device.class = &vpe_class,
1450 vpe_device.parent = NULL,
1451 strlcpy(vpe_device.bus_id, "vpe1", BUS_ID_SIZE);
1452 vpe_device.devt = MKDEV(major, minor);
1453 err = device_add(&vpe_device);
1455 printk(KERN_ERR "Adding vpe_device failed\n");
1459 local_irq_save(flags);
1463 /* Put MVPE's into 'configuration state' */
1464 set_c0_mvpcontrol(MVPCONTROL_VPC);
1466 /* dump_mtregs(); */
1468 val = read_c0_mvpconf0();
1469 hw_tcs = (val & MVPCONF0_PTC) + 1;
1470 hw_vpes = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
1472 for (tc = tclimit; tc < hw_tcs; tc++) {
1474 * Must re-enable multithreading temporarily or in case we
1475 * reschedule send IPIs or similar we might hang.
1477 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1480 local_irq_restore(flags);
1487 local_irq_save(flags);
1490 set_c0_mvpcontrol(MVPCONTROL_VPC);
1496 if ((v = alloc_vpe(tc)) == NULL) {
1497 printk(KERN_WARNING "VPE: unable to allocate VPE\n");
1502 v->ntcs = hw_tcs - tclimit;
1504 /* add the tc to the list of this vpe's tc's. */
1505 list_add(&t->tc, &v->tc);
1507 /* deactivate all but vpe0 */
1508 if (tc >= tclimit) {
1509 unsigned long tmp = read_vpe_c0_vpeconf0();
1511 tmp &= ~VPECONF0_VPA;
1514 tmp |= VPECONF0_MVP;
1515 write_vpe_c0_vpeconf0(tmp);
1518 /* disable multi-threading with TC's */
1519 write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
1521 if (tc >= vpelimit) {
1523 * Set config to be the same as vpe0,
1524 * particularly kseg0 coherency alg
1526 write_vpe_c0_config(read_c0_config());
1531 t->pvpe = v; /* set the parent vpe */
1533 if (tc >= tclimit) {
1538 /* Any TC that is bound to VPE0 gets left as is - in case
1539 we are running SMTC on VPE0. A TC that is bound to any
1540 other VPE gets bound to VPE0, ideally I'd like to make
1541 it homeless but it doesn't appear to let me bind a TC
1542 to a non-existent VPE. Which is perfectly reasonable.
1544 The (un)bound state is visible to an EJTAG probe so may
1548 if (((tmp = read_tc_c0_tcbind()) & TCBIND_CURVPE)) {
1549 /* tc is bound >vpe0 */
1550 write_tc_c0_tcbind(tmp & ~TCBIND_CURVPE);
1552 t->pvpe = get_vpe(0); /* set the parent vpe */
1556 write_tc_c0_tchalt(TCHALT_H);
1559 tmp = read_tc_c0_tcstatus();
1561 /* mark not activated and not dynamically allocatable */
1562 tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
1563 tmp |= TCSTATUS_IXMT; /* interrupt exempt */
1564 write_tc_c0_tcstatus(tmp);
1569 /* release config state */
1570 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1574 local_irq_restore(flags);
1576 #ifdef CONFIG_MIPS_APSP_KSPD
1577 kspd_events.kspd_sp_exit = kspd_sp_exit;
1582 class_unregister(&vpe_class);
1584 unregister_chrdev(major, module_name);
1590 static void __exit vpe_module_exit(void)
1594 list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
1595 if (v->state != VPE_STATE_UNUSED) {
1600 device_del(&vpe_device);
1601 unregister_chrdev(major, module_name);
1604 module_init(vpe_module_init);
1605 module_exit(vpe_module_exit);
1606 MODULE_DESCRIPTION("MIPS VPE Loader");
1607 MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc.");
1608 MODULE_LICENSE("GPL");