2 3w-xxxx.c -- 3ware Storage Controller device driver for Linux.
4 Written By: Adam Radford <linuxraid@amcc.com>
5 Modifications By: Joel Jacobson <linux@3ware.com>
6 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
7 Brad Strand <linux@3ware.com>
9 Copyright (C) 1999-2009 3ware Inc.
11 Kernel compatiblity By: Andre Hedrick <andre@suse.com>
12 Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com>
14 Further tiny build fixes and trivial hoovering Alan Cox
16 This program is free software; you can redistribute it and/or modify
17 it under the terms of the GNU General Public License as published by
18 the Free Software Foundation; version 2 of the License.
20 This program is distributed in the hope that it will be useful,
21 but WITHOUT ANY WARRANTY; without even the implied warranty of
22 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 GNU General Public License for more details.
26 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
27 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
28 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
29 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
30 solely responsible for determining the appropriateness of using and
31 distributing the Program and assumes all risks associated with its
32 exercise of rights under this Agreement, including but not limited to
33 the risks and costs of program errors, damage to or loss of data,
34 programs or equipment, and unavailability or interruption of operations.
36 DISCLAIMER OF LIABILITY
37 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
38 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
39 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
40 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
41 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
42 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
43 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
45 You should have received a copy of the GNU General Public License
46 along with this program; if not, write to the Free Software
47 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
49 Bugs/Comments/Suggestions should be mailed to:
52 For more information, goto:
57 0.1.000 - Initial release.
58 0.4.000 - Added support for Asynchronous Event Notification through
60 1.0.000 - Added DPO & FUA bit support for WRITE_10 & WRITE_6 cdb
61 to disable drive write-cache before writes.
62 1.1.000 - Fixed performance bug with DPO & FUA not existing for WRITE_6.
63 1.2.000 - Added support for clean shutdown notification/feature table.
64 1.02.00.001 - Added support for full command packet posts through ioctls
66 Bug fix so hot spare drives don't show up.
67 1.02.00.002 - Fix bug with tw_setfeature() call that caused oops on some
69 08/21/00 - release previously allocated resources on failure at
70 tw_allocate_memory (acme)
71 1.02.00.003 - Fix tw_interrupt() to report error to scsi layer when
72 controller status is non-zero.
73 Added handling of request_sense opcode.
74 Fix possible null pointer dereference in
75 tw_reset_device_extension()
76 1.02.00.004 - Add support for device id of 3ware 7000 series controllers.
77 Make tw_setfeature() call with interrupts disabled.
78 Register interrupt handler before enabling interrupts.
79 Clear attention interrupt before draining aen queue.
80 1.02.00.005 - Allocate bounce buffers and custom queue depth for raid5 for
81 6000 and 5000 series controllers.
82 Reduce polling mdelays causing problems on some systems.
83 Fix use_sg = 1 calculation bug.
84 Check for scsi_register returning NULL.
85 Add aen count to /proc/scsi/3w-xxxx.
86 Remove aen code unit masking in tw_aen_complete().
87 1.02.00.006 - Remove unit from printk in tw_scsi_eh_abort(), causing
89 Fix possible null pointer dereference in tw_scsi_queue()
90 if done function pointer was invalid.
91 1.02.00.007 - Fix possible null pointer dereferences in tw_ioctl().
92 Remove check for invalid done function pointer from
94 1.02.00.008 - Set max sectors per io to TW_MAX_SECTORS in tw_findcards().
95 Add tw_decode_error() for printing readable error messages.
96 Print some useful information on certain aen codes.
97 Add tw_decode_bits() for interpreting status register output.
98 Make scsi_set_pci_device() for kernels >= 2.4.4
99 Fix bug where aen's could be lost before a reset.
100 Re-add spinlocks in tw_scsi_detect().
101 Fix possible null pointer dereference in tw_aen_drain_queue()
102 during initialization.
103 Clear pci parity errors during initialization and during io.
104 1.02.00.009 - Remove redundant increment in tw_state_request_start().
105 Add ioctl support for direct ATA command passthru.
106 Add entire aen code string list.
107 1.02.00.010 - Cleanup queueing code, fix jbod thoughput.
108 Fix get_param for specific units.
109 1.02.00.011 - Fix bug in tw_aen_complete() where aen's could be lost.
110 Fix tw_aen_drain_queue() to display useful info at init.
111 Set tw_host->max_id for 12 port cards.
112 Add ioctl support for raw command packet post from userspace
113 with sglist fragments (parameter and io).
114 1.02.00.012 - Fix read capacity to under report by 1 sector to fix get
116 1.02.00.013 - Fix bug where more AEN codes weren't coming out during
117 driver initialization.
118 Improved handling of PCI aborts.
119 1.02.00.014 - Fix bug in tw_findcards() where AEN code could be lost.
120 Increase timeout in tw_aen_drain_queue() to 30 seconds.
121 1.02.00.015 - Re-write raw command post with data ioctl method.
122 Remove raid5 bounce buffers for raid5 for 6XXX for kernel 2.5
123 Add tw_map/unmap_scsi_sg/single_data() for kernel 2.5
124 Replace io_request_lock with host_lock for kernel 2.5
125 Set max_cmd_len to 16 for 3dm for kernel 2.5
126 1.02.00.016 - Set host->max_sectors back up to 256.
127 1.02.00.017 - Modified pci parity error handling/clearing from config space
128 during initialization.
129 1.02.00.018 - Better handling of request sense opcode and sense information
130 for failed commands. Add tw_decode_sense().
131 Replace all mdelay()'s with scsi_sleep().
132 1.02.00.019 - Revert mdelay's and scsi_sleep's, this caused problems on
134 1.02.00.020 - Add pci_set_dma_mask(), rewrite kmalloc()/virt_to_bus() to
135 pci_alloc/free_consistent().
136 Better alignment checking in tw_allocate_memory().
137 Cleanup tw_initialize_device_extension().
138 1.02.00.021 - Bump cmd_per_lun in SHT to 255 for better jbod performance.
139 Improve handling of errors in tw_interrupt().
140 Add handling/clearing of controller queue error.
141 Empty stale responses before draining aen queue.
142 Fix tw_scsi_eh_abort() to not reset on every io abort.
143 Set can_queue in SHT to 255 to prevent hang from AEN.
144 1.02.00.022 - Fix possible null pointer dereference in tw_scsi_release().
145 1.02.00.023 - Fix bug in tw_aen_drain_queue() where unit # was always zero.
146 1.02.00.024 - Add severity levels to AEN strings.
147 1.02.00.025 - Fix command interrupt spurious error messages.
148 Fix bug in raw command post with data ioctl method.
149 Fix bug where rollcall sometimes failed with cable errors.
150 Print unit # on all command timeouts.
151 1.02.00.026 - Fix possible infinite retry bug with power glitch induced
153 Cleanup some AEN severity levels.
154 1.02.00.027 - Add drive not supported AEN code for SATA controllers.
155 Remove spurious unknown ioctl error message.
156 1.02.00.028 - Fix bug where multiple controllers with no units were the
158 Fix bug where cards were being shut down more than once.
159 1.02.00.029 - Add missing pci_free_consistent() in tw_allocate_memory().
160 Replace pci_map_single() with pci_map_page() for highmem.
161 Check for tw_setfeature() failure.
162 1.02.00.030 - Make driver 64-bit clean.
163 1.02.00.031 - Cleanup polling timeouts/routines in several places.
164 Add support for mode sense opcode.
165 Add support for cache mode page.
166 Add support for synchronize cache opcode.
167 1.02.00.032 - Fix small multicard rollcall bug.
168 Make driver stay loaded with no units for hot add/swap.
169 Add support for "twe" character device for ioctls.
170 Clean up request_id queueing code.
171 Fix tw_scsi_queue() spinlocks.
172 1.02.00.033 - Fix tw_aen_complete() to not queue 'queue empty' AEN's.
173 Initialize queues correctly when loading with no valid units.
174 1.02.00.034 - Fix tw_decode_bits() to handle multiple errors.
175 Add support for user configurable cmd_per_lun.
176 Add support for sht->slave_configure().
177 1.02.00.035 - Improve tw_allocate_memory() memory allocation.
178 Fix tw_chrdev_ioctl() to sleep correctly.
179 1.02.00.036 - Increase character ioctl timeout to 60 seconds.
180 1.02.00.037 - Fix tw_ioctl() to handle all non-data ATA passthru cmds
181 for 'smartmontools' support.
182 1.26.00.038 - Roll driver minor version to 26 to denote kernel 2.6.
183 Add support for cmds_per_lun module parameter.
184 1.26.00.039 - Fix bug in tw_chrdev_ioctl() polling code.
185 Fix data_buffer_length usage in tw_chrdev_ioctl().
186 Update contact information.
187 1.26.02.000 - Convert driver to pci_driver format.
188 1.26.02.001 - Increase max ioctl buffer size to 512 sectors.
189 Make tw_scsi_queue() return 0 for 'Unknown scsi opcode'.
190 Fix tw_remove() to free irq handler/unregister_chrdev()
191 before shutting down card.
192 Change to new 'change_queue_depth' api.
193 Fix 'handled=1' ISR usage, remove bogus IRQ check.
194 1.26.02.002 - Free irq handler in __tw_shutdown().
195 Turn on RCD bit for caching mode page.
196 Serialize reset code.
199 #include <linux/module.h>
200 #include <linux/reboot.h>
201 #include <linux/smp_lock.h>
202 #include <linux/spinlock.h>
203 #include <linux/interrupt.h>
204 #include <linux/moduleparam.h>
205 #include <linux/errno.h>
206 #include <linux/types.h>
207 #include <linux/delay.h>
208 #include <linux/pci.h>
209 #include <linux/time.h>
210 #include <linux/mutex.h>
213 #include <asm/uaccess.h>
214 #include <scsi/scsi.h>
215 #include <scsi/scsi_host.h>
216 #include <scsi/scsi_tcq.h>
217 #include <scsi/scsi_cmnd.h>
221 #define TW_DRIVER_VERSION "1.26.02.002"
222 static TW_Device_Extension *tw_device_extension_list[TW_MAX_SLOT];
223 static int tw_device_extension_count = 0;
224 static int twe_major = -1;
226 /* Module parameters */
227 MODULE_AUTHOR("AMCC");
228 MODULE_DESCRIPTION("3ware Storage Controller Linux Driver");
229 MODULE_LICENSE("GPL");
230 MODULE_VERSION(TW_DRIVER_VERSION);
232 /* Function prototypes */
233 static int tw_reset_device_extension(TW_Device_Extension *tw_dev);
237 /* This function will check the status register for unexpected bits */
238 static int tw_check_bits(u32 status_reg_value)
240 if ((status_reg_value & TW_STATUS_EXPECTED_BITS) != TW_STATUS_EXPECTED_BITS) {
241 dprintk(KERN_WARNING "3w-xxxx: tw_check_bits(): No expected bits (0x%x).\n", status_reg_value);
244 if ((status_reg_value & TW_STATUS_UNEXPECTED_BITS) != 0) {
245 dprintk(KERN_WARNING "3w-xxxx: tw_check_bits(): Found unexpected bits (0x%x).\n", status_reg_value);
250 } /* End tw_check_bits() */
252 /* This function will print readable messages from status register errors */
253 static int tw_decode_bits(TW_Device_Extension *tw_dev, u32 status_reg_value, int print_host)
257 dprintk(KERN_WARNING "3w-xxxx: tw_decode_bits()\n");
260 sprintf(host, " scsi%d:", tw_dev->host->host_no);
264 if (status_reg_value & TW_STATUS_PCI_PARITY_ERROR) {
265 printk(KERN_WARNING "3w-xxxx:%s PCI Parity Error: clearing.\n", host);
266 outl(TW_CONTROL_CLEAR_PARITY_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
269 if (status_reg_value & TW_STATUS_PCI_ABORT) {
270 printk(KERN_WARNING "3w-xxxx:%s PCI Abort: clearing.\n", host);
271 outl(TW_CONTROL_CLEAR_PCI_ABORT, TW_CONTROL_REG_ADDR(tw_dev));
272 pci_write_config_word(tw_dev->tw_pci_dev, PCI_STATUS, TW_PCI_CLEAR_PCI_ABORT);
275 if (status_reg_value & TW_STATUS_QUEUE_ERROR) {
276 printk(KERN_WARNING "3w-xxxx:%s Controller Queue Error: clearing.\n", host);
277 outl(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
280 if (status_reg_value & TW_STATUS_SBUF_WRITE_ERROR) {
281 printk(KERN_WARNING "3w-xxxx:%s SBUF Write Error: clearing.\n", host);
282 outl(TW_CONTROL_CLEAR_SBUF_WRITE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
285 if (status_reg_value & TW_STATUS_MICROCONTROLLER_ERROR) {
286 if (tw_dev->reset_print == 0) {
287 printk(KERN_WARNING "3w-xxxx:%s Microcontroller Error: clearing.\n", host);
288 tw_dev->reset_print = 1;
294 } /* End tw_decode_bits() */
296 /* This function will poll the status register for a flag */
297 static int tw_poll_status(TW_Device_Extension *tw_dev, u32 flag, int seconds)
299 u32 status_reg_value;
300 unsigned long before;
303 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
306 if (tw_check_bits(status_reg_value))
307 tw_decode_bits(tw_dev, status_reg_value, 0);
309 while ((status_reg_value & flag) != flag) {
310 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
312 if (tw_check_bits(status_reg_value))
313 tw_decode_bits(tw_dev, status_reg_value, 0);
315 if (time_after(jiffies, before + HZ * seconds))
323 } /* End tw_poll_status() */
325 /* This function will poll the status register for disappearance of a flag */
326 static int tw_poll_status_gone(TW_Device_Extension *tw_dev, u32 flag, int seconds)
328 u32 status_reg_value;
329 unsigned long before;
332 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
335 if (tw_check_bits(status_reg_value))
336 tw_decode_bits(tw_dev, status_reg_value, 0);
338 while ((status_reg_value & flag) != 0) {
339 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
341 if (tw_check_bits(status_reg_value))
342 tw_decode_bits(tw_dev, status_reg_value, 0);
344 if (time_after(jiffies, before + HZ * seconds))
352 } /* End tw_poll_status_gone() */
354 /* This function will attempt to post a command packet to the board */
355 static int tw_post_command_packet(TW_Device_Extension *tw_dev, int request_id)
357 u32 status_reg_value;
358 unsigned long command_que_value;
360 dprintk(KERN_NOTICE "3w-xxxx: tw_post_command_packet()\n");
361 command_que_value = tw_dev->command_packet_physical_address[request_id];
362 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
364 if (tw_check_bits(status_reg_value)) {
365 dprintk(KERN_WARNING "3w-xxxx: tw_post_command_packet(): Unexpected bits.\n");
366 tw_decode_bits(tw_dev, status_reg_value, 1);
369 if ((status_reg_value & TW_STATUS_COMMAND_QUEUE_FULL) == 0) {
370 /* We successfully posted the command packet */
371 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
372 tw_dev->state[request_id] = TW_S_POSTED;
373 tw_dev->posted_request_count++;
374 if (tw_dev->posted_request_count > tw_dev->max_posted_request_count) {
375 tw_dev->max_posted_request_count = tw_dev->posted_request_count;
378 /* Couldn't post the command packet, so we do it in the isr */
379 if (tw_dev->state[request_id] != TW_S_PENDING) {
380 tw_dev->state[request_id] = TW_S_PENDING;
381 tw_dev->pending_request_count++;
382 if (tw_dev->pending_request_count > tw_dev->max_pending_request_count) {
383 tw_dev->max_pending_request_count = tw_dev->pending_request_count;
385 tw_dev->pending_queue[tw_dev->pending_tail] = request_id;
386 if (tw_dev->pending_tail == TW_Q_LENGTH-1) {
387 tw_dev->pending_tail = TW_Q_START;
389 tw_dev->pending_tail = tw_dev->pending_tail + 1;
392 TW_UNMASK_COMMAND_INTERRUPT(tw_dev);
396 } /* End tw_post_command_packet() */
398 /* This function will return valid sense buffer information for failed cmds */
399 static int tw_decode_sense(TW_Device_Extension *tw_dev, int request_id, int fill_sense)
404 dprintk(KERN_WARNING "3w-xxxx: tw_decode_sense()\n");
405 command = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
407 printk(KERN_WARNING "3w-xxxx: scsi%d: Command failed: status = 0x%x, flags = 0x%x, unit #%d.\n", tw_dev->host->host_no, command->status, command->flags, TW_UNIT_OUT(command->unit__hostid));
409 /* Attempt to return intelligent sense information */
411 if ((command->status == 0xc7) || (command->status == 0xcb)) {
412 for (i = 0; i < ARRAY_SIZE(tw_sense_table); i++) {
413 if (command->flags == tw_sense_table[i][0]) {
415 /* Valid bit and 'current errors' */
416 tw_dev->srb[request_id]->sense_buffer[0] = (0x1 << 7 | 0x70);
419 tw_dev->srb[request_id]->sense_buffer[2] = tw_sense_table[i][1];
421 /* Additional sense length */
422 tw_dev->srb[request_id]->sense_buffer[7] = 0xa; /* 10 bytes */
424 /* Additional sense code */
425 tw_dev->srb[request_id]->sense_buffer[12] = tw_sense_table[i][2];
427 /* Additional sense code qualifier */
428 tw_dev->srb[request_id]->sense_buffer[13] = tw_sense_table[i][3];
430 tw_dev->srb[request_id]->result = (DID_OK << 16) | (CHECK_CONDITION << 1);
431 return TW_ISR_DONT_RESULT; /* Special case for isr to not over-write result */
436 /* If no table match, error so we get a reset */
441 } /* End tw_decode_sense() */
443 /* This function will report controller error status */
444 static int tw_check_errors(TW_Device_Extension *tw_dev)
446 u32 status_reg_value;
448 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
450 if (TW_STATUS_ERRORS(status_reg_value) || tw_check_bits(status_reg_value)) {
451 tw_decode_bits(tw_dev, status_reg_value, 0);
456 } /* End tw_check_errors() */
458 /* This function will empty the response que */
459 static void tw_empty_response_que(TW_Device_Extension *tw_dev)
461 u32 status_reg_value, response_que_value;
463 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
465 while ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) {
466 response_que_value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
467 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
469 } /* End tw_empty_response_que() */
471 /* This function will free a request_id */
472 static void tw_state_request_finish(TW_Device_Extension *tw_dev, int request_id)
474 tw_dev->free_queue[tw_dev->free_tail] = request_id;
475 tw_dev->state[request_id] = TW_S_FINISHED;
476 tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH;
477 } /* End tw_state_request_finish() */
479 /* This function will assign an available request_id */
480 static void tw_state_request_start(TW_Device_Extension *tw_dev, int *request_id)
482 *request_id = tw_dev->free_queue[tw_dev->free_head];
483 tw_dev->free_head = (tw_dev->free_head + 1) % TW_Q_LENGTH;
484 tw_dev->state[*request_id] = TW_S_STARTED;
485 } /* End tw_state_request_start() */
487 /* Show some statistics about the card */
488 static ssize_t tw_show_stats(struct device *dev, struct device_attribute *attr,
491 struct Scsi_Host *host = class_to_shost(dev);
492 TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
493 unsigned long flags = 0;
496 spin_lock_irqsave(tw_dev->host->host_lock, flags);
497 len = snprintf(buf, PAGE_SIZE, "3w-xxxx Driver version: %s\n"
498 "Current commands posted: %4d\n"
499 "Max commands posted: %4d\n"
500 "Current pending commands: %4d\n"
501 "Max pending commands: %4d\n"
502 "Last sgl length: %4d\n"
503 "Max sgl length: %4d\n"
504 "Last sector count: %4d\n"
505 "Max sector count: %4d\n"
506 "SCSI Host Resets: %4d\n"
509 tw_dev->posted_request_count,
510 tw_dev->max_posted_request_count,
511 tw_dev->pending_request_count,
512 tw_dev->max_pending_request_count,
514 tw_dev->max_sgl_entries,
515 tw_dev->sector_count,
516 tw_dev->max_sector_count,
519 spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
521 } /* End tw_show_stats() */
523 /* This function will set a devices queue depth */
524 static int tw_change_queue_depth(struct scsi_device *sdev, int queue_depth)
526 if (queue_depth > TW_Q_LENGTH-2)
527 queue_depth = TW_Q_LENGTH-2;
528 scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth);
530 } /* End tw_change_queue_depth() */
532 /* Create sysfs 'stats' entry */
533 static struct device_attribute tw_host_stats_attr = {
538 .show = tw_show_stats
541 /* Host attributes initializer */
542 static struct device_attribute *tw_host_attrs[] = {
547 /* This function will read the aen queue from the isr */
548 static int tw_aen_read_queue(TW_Device_Extension *tw_dev, int request_id)
550 TW_Command *command_packet;
552 unsigned long command_que_value;
553 u32 status_reg_value;
554 unsigned long param_value = 0;
556 dprintk(KERN_NOTICE "3w-xxxx: tw_aen_read_queue()\n");
558 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
559 if (tw_check_bits(status_reg_value)) {
560 dprintk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Unexpected bits.\n");
561 tw_decode_bits(tw_dev, status_reg_value, 1);
564 if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
565 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet virtual address.\n");
568 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
569 memset(command_packet, 0, sizeof(TW_Sector));
570 command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
571 command_packet->size = 4;
572 command_packet->request_id = request_id;
573 command_packet->status = 0;
574 command_packet->flags = 0;
575 command_packet->byte6.parameter_count = 1;
576 command_que_value = tw_dev->command_packet_physical_address[request_id];
577 if (command_que_value == 0) {
578 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet physical address.\n");
581 /* Now setup the param */
582 if (tw_dev->alignment_virtual_address[request_id] == NULL) {
583 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment virtual address.\n");
586 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
587 memset(param, 0, sizeof(TW_Sector));
588 param->table_id = 0x401; /* AEN table */
589 param->parameter_id = 2; /* Unit code */
590 param->parameter_size_bytes = 2;
591 param_value = tw_dev->alignment_physical_address[request_id];
592 if (param_value == 0) {
593 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment physical address.\n");
596 command_packet->byte8.param.sgl[0].address = param_value;
597 command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
599 /* Now post the command packet */
600 if ((status_reg_value & TW_STATUS_COMMAND_QUEUE_FULL) == 0) {
601 dprintk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post succeeded.\n");
602 tw_dev->srb[request_id] = NULL; /* Flag internal command */
603 tw_dev->state[request_id] = TW_S_POSTED;
604 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
606 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post failed, will retry.\n");
611 } /* End tw_aen_read_queue() */
613 /* This function will complete an aen request from the isr */
614 static int tw_aen_complete(TW_Device_Extension *tw_dev, int request_id)
618 int error = 0, table_max = 0;
620 dprintk(KERN_WARNING "3w-xxxx: tw_aen_complete()\n");
621 if (tw_dev->alignment_virtual_address[request_id] == NULL) {
622 printk(KERN_WARNING "3w-xxxx: tw_aen_complete(): Bad alignment virtual address.\n");
625 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
626 aen = *(unsigned short *)(param->data);
627 dprintk(KERN_NOTICE "3w-xxxx: tw_aen_complete(): Queue'd code 0x%x\n", aen);
629 /* Print some useful info when certain aen codes come out */
631 printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: INFO: AEN queue overflow.\n", tw_dev->host->host_no);
633 table_max = ARRAY_SIZE(tw_aen_string);
634 if ((aen & 0x0ff) < table_max) {
635 if ((tw_aen_string[aen & 0xff][strlen(tw_aen_string[aen & 0xff])-1]) == '#') {
636 printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s%d.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff], aen >> 8);
639 printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff]);
642 printk(KERN_WARNING "3w-xxxx: scsi%d: Received AEN %d.\n", tw_dev->host->host_no, aen);
645 if (aen != TW_AEN_QUEUE_EMPTY) {
648 /* Now queue the code */
649 tw_dev->aen_queue[tw_dev->aen_tail] = aen;
650 if (tw_dev->aen_tail == TW_Q_LENGTH - 1) {
651 tw_dev->aen_tail = TW_Q_START;
653 tw_dev->aen_tail = tw_dev->aen_tail + 1;
655 if (tw_dev->aen_head == tw_dev->aen_tail) {
656 if (tw_dev->aen_head == TW_Q_LENGTH - 1) {
657 tw_dev->aen_head = TW_Q_START;
659 tw_dev->aen_head = tw_dev->aen_head + 1;
663 error = tw_aen_read_queue(tw_dev, request_id);
665 printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing AEN.\n", tw_dev->host->host_no);
666 tw_dev->state[request_id] = TW_S_COMPLETED;
667 tw_state_request_finish(tw_dev, request_id);
670 tw_dev->state[request_id] = TW_S_COMPLETED;
671 tw_state_request_finish(tw_dev, request_id);
675 } /* End tw_aen_complete() */
677 /* This function will drain the aen queue after a soft reset */
678 static int tw_aen_drain_queue(TW_Device_Extension *tw_dev)
680 TW_Command *command_packet;
683 unsigned long command_que_value;
684 unsigned long param_value;
685 TW_Response_Queue response_queue;
687 unsigned short aen_code;
691 int found = 0, table_max = 0;
693 dprintk(KERN_NOTICE "3w-xxxx: tw_aen_drain_queue()\n");
695 if (tw_poll_status(tw_dev, TW_STATUS_ATTENTION_INTERRUPT | TW_STATUS_MICROCONTROLLER_READY, 30)) {
696 dprintk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): No attention interrupt for card %d.\n", tw_device_extension_count);
699 TW_CLEAR_ATTENTION_INTERRUPT(tw_dev);
701 /* Empty response queue */
702 tw_empty_response_que(tw_dev);
704 /* Initialize command packet */
705 if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
706 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet virtual address.\n");
709 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
710 memset(command_packet, 0, sizeof(TW_Sector));
711 command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
712 command_packet->size = 4;
713 command_packet->request_id = request_id;
714 command_packet->status = 0;
715 command_packet->flags = 0;
716 command_packet->byte6.parameter_count = 1;
717 command_que_value = tw_dev->command_packet_physical_address[request_id];
718 if (command_que_value == 0) {
719 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet physical address.\n");
723 /* Now setup the param */
724 if (tw_dev->alignment_virtual_address[request_id] == NULL) {
725 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment virtual address.\n");
728 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
729 memset(param, 0, sizeof(TW_Sector));
730 param->table_id = 0x401; /* AEN table */
731 param->parameter_id = 2; /* Unit code */
732 param->parameter_size_bytes = 2;
733 param_value = tw_dev->alignment_physical_address[request_id];
734 if (param_value == 0) {
735 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment physical address.\n");
738 command_packet->byte8.param.sgl[0].address = param_value;
739 command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
741 /* Now drain the controller's aen queue */
743 /* Post command packet */
744 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
746 /* Now poll for completion */
747 if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) {
748 response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
749 request_id = TW_RESID_OUT(response_queue.response_id);
751 if (request_id != 0) {
752 /* Unexpected request id */
753 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Unexpected request id.\n");
757 if (command_packet->status != 0) {
758 if (command_packet->flags != TW_AEN_TABLE_UNDEFINED) {
760 tw_decode_sense(tw_dev, request_id, 0);
763 /* We know this is a 3w-1x00, and doesn't support aen's */
768 /* Now check the aen */
769 aen = *(unsigned short *)(param->data);
770 aen_code = (aen & 0x0ff);
773 case TW_AEN_QUEUE_EMPTY:
774 dprintk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]);
775 if (first_reset != 1) {
781 case TW_AEN_SOFT_RESET:
782 if (first_reset == 0) {
785 printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]);
792 printk(KERN_WARNING "3w-xxxx: AEN: INFO: AEN queue overflow.\n");
794 table_max = ARRAY_SIZE(tw_aen_string);
795 if ((aen & 0x0ff) < table_max) {
796 if ((tw_aen_string[aen & 0xff][strlen(tw_aen_string[aen & 0xff])-1]) == '#') {
797 printk(KERN_WARNING "3w-xxxx: AEN: %s%d.\n", tw_aen_string[aen & 0xff], aen >> 8);
799 printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]);
802 printk(KERN_WARNING "3w-xxxx: Received AEN %d.\n", aen);
808 /* Now put the aen on the aen_queue */
810 tw_dev->aen_queue[tw_dev->aen_tail] = aen;
811 if (tw_dev->aen_tail == TW_Q_LENGTH - 1) {
812 tw_dev->aen_tail = TW_Q_START;
814 tw_dev->aen_tail = tw_dev->aen_tail + 1;
816 if (tw_dev->aen_head == tw_dev->aen_tail) {
817 if (tw_dev->aen_head == TW_Q_LENGTH - 1) {
818 tw_dev->aen_head = TW_Q_START;
820 tw_dev->aen_head = tw_dev->aen_head + 1;
827 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Response never received.\n");
830 } while (finished == 0);
833 } /* End tw_aen_drain_queue() */
835 /* This function will allocate memory */
836 static int tw_allocate_memory(TW_Device_Extension *tw_dev, int size, int which)
839 dma_addr_t dma_handle;
840 unsigned long *cpu_addr = NULL;
842 dprintk(KERN_NOTICE "3w-xxxx: tw_allocate_memory()\n");
844 cpu_addr = pci_alloc_consistent(tw_dev->tw_pci_dev, size*TW_Q_LENGTH, &dma_handle);
845 if (cpu_addr == NULL) {
846 printk(KERN_WARNING "3w-xxxx: pci_alloc_consistent() failed.\n");
850 if ((unsigned long)cpu_addr % (tw_dev->tw_pci_dev->device == TW_DEVICE_ID ? TW_ALIGNMENT_6000 : TW_ALIGNMENT_7000)) {
851 printk(KERN_WARNING "3w-xxxx: Couldn't allocate correctly aligned memory.\n");
852 pci_free_consistent(tw_dev->tw_pci_dev, size*TW_Q_LENGTH, cpu_addr, dma_handle);
856 memset(cpu_addr, 0, size*TW_Q_LENGTH);
858 for (i=0;i<TW_Q_LENGTH;i++) {
861 tw_dev->command_packet_physical_address[i] = dma_handle+(i*size);
862 tw_dev->command_packet_virtual_address[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size));
865 tw_dev->alignment_physical_address[i] = dma_handle+(i*size);
866 tw_dev->alignment_virtual_address[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size));
869 printk(KERN_WARNING "3w-xxxx: tw_allocate_memory(): case slip in tw_allocate_memory()\n");
875 } /* End tw_allocate_memory() */
877 /* This function handles ioctl for the character device */
878 static int tw_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
881 dma_addr_t dma_handle;
882 unsigned short tw_aen_code;
884 unsigned int data_buffer_length = 0;
885 unsigned long data_buffer_length_adjusted = 0;
886 unsigned long *cpu_addr;
888 TW_New_Ioctl *tw_ioctl;
889 TW_Passthru *passthru;
890 TW_Device_Extension *tw_dev = tw_device_extension_list[iminor(inode)];
891 int retval = -EFAULT;
892 void __user *argp = (void __user *)arg;
894 dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl()\n");
896 /* Only let one of these through at a time */
897 if (mutex_lock_interruptible(&tw_dev->ioctl_lock))
900 /* First copy down the buffer length */
901 if (copy_from_user(&data_buffer_length, argp, sizeof(unsigned int)))
905 if (data_buffer_length > TW_MAX_IOCTL_SECTORS * 512) {
910 /* Hardware can only do multiple of 512 byte transfers */
911 data_buffer_length_adjusted = (data_buffer_length + 511) & ~511;
913 /* Now allocate ioctl buf memory */
914 cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_New_Ioctl) - 1, &dma_handle, GFP_KERNEL);
915 if (cpu_addr == NULL) {
920 tw_ioctl = (TW_New_Ioctl *)cpu_addr;
922 /* Now copy down the entire ioctl */
923 if (copy_from_user(tw_ioctl, argp, data_buffer_length + sizeof(TW_New_Ioctl) - 1))
926 passthru = (TW_Passthru *)&tw_ioctl->firmware_command;
928 /* See which ioctl we are doing */
931 dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_OP_NOP.\n");
933 case TW_OP_AEN_LISTEN:
934 dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_AEN_LISTEN.\n");
935 memset(tw_ioctl->data_buffer, 0, data_buffer_length);
937 spin_lock_irqsave(tw_dev->host->host_lock, flags);
938 if (tw_dev->aen_head == tw_dev->aen_tail) {
939 tw_aen_code = TW_AEN_QUEUE_EMPTY;
941 tw_aen_code = tw_dev->aen_queue[tw_dev->aen_head];
942 if (tw_dev->aen_head == TW_Q_LENGTH - 1) {
943 tw_dev->aen_head = TW_Q_START;
945 tw_dev->aen_head = tw_dev->aen_head + 1;
948 spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
949 memcpy(tw_ioctl->data_buffer, &tw_aen_code, sizeof(tw_aen_code));
951 case TW_CMD_PACKET_WITH_DATA:
952 dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_CMD_PACKET_WITH_DATA.\n");
953 spin_lock_irqsave(tw_dev->host->host_lock, flags);
955 tw_state_request_start(tw_dev, &request_id);
957 /* Flag internal command */
958 tw_dev->srb[request_id] = NULL;
960 /* Flag chrdev ioctl */
961 tw_dev->chrdev_request_id = request_id;
963 tw_ioctl->firmware_command.request_id = request_id;
965 /* Load the sg list */
966 switch (TW_SGL_OUT(tw_ioctl->firmware_command.opcode__sgloffset)) {
968 tw_ioctl->firmware_command.byte8.param.sgl[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1;
969 tw_ioctl->firmware_command.byte8.param.sgl[0].length = data_buffer_length_adjusted;
972 tw_ioctl->firmware_command.byte8.io.sgl[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1;
973 tw_ioctl->firmware_command.byte8.io.sgl[0].length = data_buffer_length_adjusted;
976 passthru->sg_list[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1;
977 passthru->sg_list[0].length = data_buffer_length_adjusted;
981 memcpy(tw_dev->command_packet_virtual_address[request_id], &(tw_ioctl->firmware_command), sizeof(TW_Command));
983 /* Now post the command packet to the controller */
984 tw_post_command_packet(tw_dev, request_id);
985 spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
987 timeout = TW_IOCTL_CHRDEV_TIMEOUT*HZ;
989 /* Now wait for the command to complete */
990 timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
992 /* We timed out, and didn't get an interrupt */
993 if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
994 /* Now we need to reset the board */
995 printk(KERN_WARNING "3w-xxxx: scsi%d: Character ioctl (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, cmd);
997 if (tw_reset_device_extension(tw_dev)) {
998 printk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): Reset failed for card %d.\n", tw_dev->host->host_no);
1003 /* Now copy in the command packet response */
1004 memcpy(&(tw_ioctl->firmware_command), tw_dev->command_packet_virtual_address[request_id], sizeof(TW_Command));
1006 /* Now complete the io */
1007 spin_lock_irqsave(tw_dev->host->host_lock, flags);
1008 tw_dev->posted_request_count--;
1009 tw_dev->state[request_id] = TW_S_COMPLETED;
1010 tw_state_request_finish(tw_dev, request_id);
1011 spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
1018 /* Now copy the response to userspace */
1019 if (copy_to_user(argp, tw_ioctl, sizeof(TW_New_Ioctl) + data_buffer_length - 1))
1023 /* Now free ioctl buf memory */
1024 dma_free_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_New_Ioctl) - 1, cpu_addr, dma_handle);
1026 mutex_unlock(&tw_dev->ioctl_lock);
1028 } /* End tw_chrdev_ioctl() */
1030 /* This function handles open for the character device */
1031 /* NOTE that this function races with remove. */
1032 static int tw_chrdev_open(struct inode *inode, struct file *file)
1034 unsigned int minor_number;
1036 cycle_kernel_lock();
1037 dprintk(KERN_WARNING "3w-xxxx: tw_ioctl_open()\n");
1039 minor_number = iminor(inode);
1040 if (minor_number >= tw_device_extension_count)
1044 } /* End tw_chrdev_open() */
1046 /* File operations struct for character device */
1047 static const struct file_operations tw_fops = {
1048 .owner = THIS_MODULE,
1049 .ioctl = tw_chrdev_ioctl,
1050 .open = tw_chrdev_open,
1054 /* This function will free up device extension resources */
1055 static void tw_free_device_extension(TW_Device_Extension *tw_dev)
1057 dprintk(KERN_NOTICE "3w-xxxx: tw_free_device_extension()\n");
1059 /* Free command packet and generic buffer memory */
1060 if (tw_dev->command_packet_virtual_address[0])
1061 pci_free_consistent(tw_dev->tw_pci_dev, sizeof(TW_Command)*TW_Q_LENGTH, tw_dev->command_packet_virtual_address[0], tw_dev->command_packet_physical_address[0]);
1063 if (tw_dev->alignment_virtual_address[0])
1064 pci_free_consistent(tw_dev->tw_pci_dev, sizeof(TW_Sector)*TW_Q_LENGTH, tw_dev->alignment_virtual_address[0], tw_dev->alignment_physical_address[0]);
1065 } /* End tw_free_device_extension() */
1067 /* This function will send an initconnection command to controller */
1068 static int tw_initconnection(TW_Device_Extension *tw_dev, int message_credits)
1070 unsigned long command_que_value;
1071 TW_Command *command_packet;
1072 TW_Response_Queue response_queue;
1075 dprintk(KERN_NOTICE "3w-xxxx: tw_initconnection()\n");
1077 /* Initialize InitConnection command packet */
1078 if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
1079 printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet virtual address.\n");
1083 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1084 memset(command_packet, 0, sizeof(TW_Sector));
1085 command_packet->opcode__sgloffset = TW_OPSGL_IN(0, TW_OP_INIT_CONNECTION);
1086 command_packet->size = TW_INIT_COMMAND_PACKET_SIZE;
1087 command_packet->request_id = request_id;
1088 command_packet->status = 0x0;
1089 command_packet->flags = 0x0;
1090 command_packet->byte6.message_credits = message_credits;
1091 command_packet->byte8.init_connection.response_queue_pointer = 0x0;
1092 command_que_value = tw_dev->command_packet_physical_address[request_id];
1094 if (command_que_value == 0) {
1095 printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet physical address.\n");
1099 /* Send command packet to the board */
1100 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
1102 /* Poll for completion */
1103 if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) {
1104 response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
1105 request_id = TW_RESID_OUT(response_queue.response_id);
1107 if (request_id != 0) {
1108 /* unexpected request id */
1109 printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Unexpected request id.\n");
1112 if (command_packet->status != 0) {
1114 tw_decode_sense(tw_dev, request_id, 0);
1119 } /* End tw_initconnection() */
1121 /* Set a value in the features table */
1122 static int tw_setfeature(TW_Device_Extension *tw_dev, int parm, int param_size,
1126 TW_Command *command_packet;
1127 TW_Response_Queue response_queue;
1129 unsigned long command_que_value;
1130 unsigned long param_value;
1132 /* Initialize SetParam command packet */
1133 if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
1134 printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet virtual address.\n");
1137 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1138 memset(command_packet, 0, sizeof(TW_Sector));
1139 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1141 command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_SET_PARAM);
1142 param->table_id = 0x404; /* Features table */
1143 param->parameter_id = parm;
1144 param->parameter_size_bytes = param_size;
1145 memcpy(param->data, val, param_size);
1147 param_value = tw_dev->alignment_physical_address[request_id];
1148 if (param_value == 0) {
1149 printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad alignment physical address.\n");
1150 tw_dev->state[request_id] = TW_S_COMPLETED;
1151 tw_state_request_finish(tw_dev, request_id);
1152 tw_dev->srb[request_id]->result = (DID_OK << 16);
1153 tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
1155 command_packet->byte8.param.sgl[0].address = param_value;
1156 command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1158 command_packet->size = 4;
1159 command_packet->request_id = request_id;
1160 command_packet->byte6.parameter_count = 1;
1162 command_que_value = tw_dev->command_packet_physical_address[request_id];
1163 if (command_que_value == 0) {
1164 printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet physical address.\n");
1168 /* Send command packet to the board */
1169 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
1171 /* Poll for completion */
1172 if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) {
1173 response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
1174 request_id = TW_RESID_OUT(response_queue.response_id);
1176 if (request_id != 0) {
1177 /* unexpected request id */
1178 printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Unexpected request id.\n");
1181 if (command_packet->status != 0) {
1183 tw_decode_sense(tw_dev, request_id, 0);
1189 } /* End tw_setfeature() */
1191 /* This function will reset a controller */
1192 static int tw_reset_sequence(TW_Device_Extension *tw_dev)
1196 unsigned char c = 1;
1198 /* Reset the board */
1199 while (tries < TW_MAX_RESET_TRIES) {
1200 TW_SOFT_RESET(tw_dev);
1202 error = tw_aen_drain_queue(tw_dev);
1204 printk(KERN_WARNING "3w-xxxx: scsi%d: AEN drain failed, retrying.\n", tw_dev->host->host_no);
1209 /* Check for controller errors */
1210 if (tw_check_errors(tw_dev)) {
1211 printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors found, retrying.\n", tw_dev->host->host_no);
1216 /* Now the controller is in a good state */
1220 if (tries >= TW_MAX_RESET_TRIES) {
1221 printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors, card not responding, check all cabling.\n", tw_dev->host->host_no);
1225 error = tw_initconnection(tw_dev, TW_INIT_MESSAGE_CREDITS);
1227 printk(KERN_WARNING "3w-xxxx: scsi%d: Connection initialization failed.\n", tw_dev->host->host_no);
1231 error = tw_setfeature(tw_dev, 2, 1, &c);
1233 printk(KERN_WARNING "3w-xxxx: Unable to set features for card, probable old firmware or card.\n");
1237 } /* End tw_reset_sequence() */
1239 /* This function will initialize the fields of a device extension */
1240 static int tw_initialize_device_extension(TW_Device_Extension *tw_dev)
1244 dprintk(KERN_NOTICE "3w-xxxx: tw_initialize_device_extension()\n");
1246 /* Initialize command packet buffers */
1247 error = tw_allocate_memory(tw_dev, sizeof(TW_Command), 0);
1249 printk(KERN_WARNING "3w-xxxx: Command packet memory allocation failed.\n");
1253 /* Initialize generic buffer */
1254 error = tw_allocate_memory(tw_dev, sizeof(TW_Sector), 1);
1256 printk(KERN_WARNING "3w-xxxx: Generic memory allocation failed.\n");
1260 for (i=0;i<TW_Q_LENGTH;i++) {
1261 tw_dev->free_queue[i] = i;
1262 tw_dev->state[i] = TW_S_INITIAL;
1265 tw_dev->pending_head = TW_Q_START;
1266 tw_dev->pending_tail = TW_Q_START;
1267 tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
1269 mutex_init(&tw_dev->ioctl_lock);
1270 init_waitqueue_head(&tw_dev->ioctl_wqueue);
1273 } /* End tw_initialize_device_extension() */
1275 static int tw_map_scsi_sg_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
1279 dprintk(KERN_WARNING "3w-xxxx: tw_map_scsi_sg_data()\n");
1281 use_sg = scsi_dma_map(cmd);
1283 printk(KERN_WARNING "3w-xxxx: tw_map_scsi_sg_data(): pci_map_sg() failed.\n");
1287 cmd->SCp.phase = TW_PHASE_SGLIST;
1288 cmd->SCp.have_data_in = use_sg;
1291 } /* End tw_map_scsi_sg_data() */
1293 static void tw_unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
1295 dprintk(KERN_WARNING "3w-xxxx: tw_unmap_scsi_data()\n");
1297 if (cmd->SCp.phase == TW_PHASE_SGLIST)
1298 scsi_dma_unmap(cmd);
1299 } /* End tw_unmap_scsi_data() */
1301 /* This function will reset a device extension */
1302 static int tw_reset_device_extension(TW_Device_Extension *tw_dev)
1305 struct scsi_cmnd *srb;
1306 unsigned long flags = 0;
1308 dprintk(KERN_NOTICE "3w-xxxx: tw_reset_device_extension()\n");
1310 set_bit(TW_IN_RESET, &tw_dev->flags);
1311 TW_DISABLE_INTERRUPTS(tw_dev);
1312 TW_MASK_COMMAND_INTERRUPT(tw_dev);
1313 spin_lock_irqsave(tw_dev->host->host_lock, flags);
1315 /* Abort all requests that are in progress */
1316 for (i=0;i<TW_Q_LENGTH;i++) {
1317 if ((tw_dev->state[i] != TW_S_FINISHED) &&
1318 (tw_dev->state[i] != TW_S_INITIAL) &&
1319 (tw_dev->state[i] != TW_S_COMPLETED)) {
1320 srb = tw_dev->srb[i];
1322 srb->result = (DID_RESET << 16);
1323 tw_dev->srb[i]->scsi_done(tw_dev->srb[i]);
1324 tw_unmap_scsi_data(tw_dev->tw_pci_dev, tw_dev->srb[i]);
1329 /* Reset queues and counts */
1330 for (i=0;i<TW_Q_LENGTH;i++) {
1331 tw_dev->free_queue[i] = i;
1332 tw_dev->state[i] = TW_S_INITIAL;
1334 tw_dev->free_head = TW_Q_START;
1335 tw_dev->free_tail = TW_Q_START;
1336 tw_dev->posted_request_count = 0;
1337 tw_dev->pending_request_count = 0;
1338 tw_dev->pending_head = TW_Q_START;
1339 tw_dev->pending_tail = TW_Q_START;
1340 tw_dev->reset_print = 0;
1342 spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
1344 if (tw_reset_sequence(tw_dev)) {
1345 printk(KERN_WARNING "3w-xxxx: scsi%d: Reset sequence failed.\n", tw_dev->host->host_no);
1349 TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
1350 clear_bit(TW_IN_RESET, &tw_dev->flags);
1351 tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
1354 } /* End tw_reset_device_extension() */
1356 /* This funciton returns unit geometry in cylinders/heads/sectors */
1357 static int tw_scsi_biosparam(struct scsi_device *sdev, struct block_device *bdev,
1358 sector_t capacity, int geom[])
1360 int heads, sectors, cylinders;
1361 TW_Device_Extension *tw_dev;
1363 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam()\n");
1364 tw_dev = (TW_Device_Extension *)sdev->host->hostdata;
1368 cylinders = sector_div(capacity, heads * sectors);
1370 if (capacity >= 0x200000) {
1373 cylinders = sector_div(capacity, heads * sectors);
1376 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam(): heads = %d, sectors = %d, cylinders = %d\n", heads, sectors, cylinders);
1379 geom[2] = cylinders;
1382 } /* End tw_scsi_biosparam() */
1384 /* This is the new scsi eh reset function */
1385 static int tw_scsi_eh_reset(struct scsi_cmnd *SCpnt)
1387 TW_Device_Extension *tw_dev=NULL;
1388 int retval = FAILED;
1390 tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
1392 tw_dev->num_resets++;
1394 sdev_printk(KERN_WARNING, SCpnt->device,
1395 "WARNING: Command (0x%x) timed out, resetting card.\n",
1398 /* Make sure we are not issuing an ioctl or resetting from ioctl */
1399 mutex_lock(&tw_dev->ioctl_lock);
1401 /* Now reset the card and some of the device extension data */
1402 if (tw_reset_device_extension(tw_dev)) {
1403 printk(KERN_WARNING "3w-xxxx: scsi%d: Reset failed.\n", tw_dev->host->host_no);
1409 mutex_unlock(&tw_dev->ioctl_lock);
1411 } /* End tw_scsi_eh_reset() */
1413 /* This function handles scsi inquiry commands */
1414 static int tw_scsiop_inquiry(TW_Device_Extension *tw_dev, int request_id)
1417 TW_Command *command_packet;
1418 unsigned long command_que_value;
1419 unsigned long param_value;
1421 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry()\n");
1423 /* Initialize command packet */
1424 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1425 if (command_packet == NULL) {
1426 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet virtual address.\n");
1429 memset(command_packet, 0, sizeof(TW_Sector));
1430 command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1431 command_packet->size = 4;
1432 command_packet->request_id = request_id;
1433 command_packet->status = 0;
1434 command_packet->flags = 0;
1435 command_packet->byte6.parameter_count = 1;
1437 /* Now setup the param */
1438 if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1439 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment virtual address.\n");
1442 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1443 memset(param, 0, sizeof(TW_Sector));
1444 param->table_id = 3; /* unit summary table */
1445 param->parameter_id = 3; /* unitsstatus parameter */
1446 param->parameter_size_bytes = TW_MAX_UNITS;
1447 param_value = tw_dev->alignment_physical_address[request_id];
1448 if (param_value == 0) {
1449 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment physical address.\n");
1453 command_packet->byte8.param.sgl[0].address = param_value;
1454 command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1455 command_que_value = tw_dev->command_packet_physical_address[request_id];
1456 if (command_que_value == 0) {
1457 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet physical address.\n");
1461 /* Now try to post the command packet */
1462 tw_post_command_packet(tw_dev, request_id);
1465 } /* End tw_scsiop_inquiry() */
1467 static void tw_transfer_internal(TW_Device_Extension *tw_dev, int request_id,
1468 void *data, unsigned int len)
1470 scsi_sg_copy_from_buffer(tw_dev->srb[request_id], data, len);
1473 /* This function is called by the isr to complete an inquiry command */
1474 static int tw_scsiop_inquiry_complete(TW_Device_Extension *tw_dev, int request_id)
1476 unsigned char *is_unit_present;
1477 unsigned char request_buffer[36];
1480 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry_complete()\n");
1482 memset(request_buffer, 0, sizeof(request_buffer));
1483 request_buffer[0] = TYPE_DISK; /* Peripheral device type */
1484 request_buffer[1] = 0; /* Device type modifier */
1485 request_buffer[2] = 0; /* No ansi/iso compliance */
1486 request_buffer[4] = 31; /* Additional length */
1487 memcpy(&request_buffer[8], "3ware ", 8); /* Vendor ID */
1488 sprintf(&request_buffer[16], "Logical Disk %-2d ", tw_dev->srb[request_id]->device->id);
1489 memcpy(&request_buffer[32], TW_DRIVER_VERSION, 3);
1490 tw_transfer_internal(tw_dev, request_id, request_buffer,
1491 sizeof(request_buffer));
1493 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1494 if (param == NULL) {
1495 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry_complete(): Bad alignment virtual address.\n");
1498 is_unit_present = &(param->data[0]);
1500 if (is_unit_present[tw_dev->srb[request_id]->device->id] & TW_UNIT_ONLINE) {
1501 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 1;
1503 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 0;
1504 tw_dev->srb[request_id]->result = (DID_BAD_TARGET << 16);
1505 return TW_ISR_DONT_RESULT;
1509 } /* End tw_scsiop_inquiry_complete() */
1511 /* This function handles scsi mode_sense commands */
1512 static int tw_scsiop_mode_sense(TW_Device_Extension *tw_dev, int request_id)
1515 TW_Command *command_packet;
1516 unsigned long command_que_value;
1517 unsigned long param_value;
1519 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_mode_sense()\n");
1521 /* Only page control = 0, page code = 0x8 (cache page) supported */
1522 if (tw_dev->srb[request_id]->cmnd[2] != 0x8) {
1523 tw_dev->state[request_id] = TW_S_COMPLETED;
1524 tw_state_request_finish(tw_dev, request_id);
1525 tw_dev->srb[request_id]->result = (DID_OK << 16);
1526 tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
1530 /* Now read firmware cache setting for this unit */
1531 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1532 if (command_packet == NULL) {
1533 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet virtual address.\n");
1537 /* Setup the command packet */
1538 memset(command_packet, 0, sizeof(TW_Sector));
1539 command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1540 command_packet->size = 4;
1541 command_packet->request_id = request_id;
1542 command_packet->status = 0;
1543 command_packet->flags = 0;
1544 command_packet->byte6.parameter_count = 1;
1546 /* Setup the param */
1547 if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1548 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment virtual address.\n");
1552 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1553 memset(param, 0, sizeof(TW_Sector));
1554 param->table_id = TW_UNIT_INFORMATION_TABLE_BASE + tw_dev->srb[request_id]->device->id;
1555 param->parameter_id = 7; /* unit flags */
1556 param->parameter_size_bytes = 1;
1557 param_value = tw_dev->alignment_physical_address[request_id];
1558 if (param_value == 0) {
1559 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment physical address.\n");
1563 command_packet->byte8.param.sgl[0].address = param_value;
1564 command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1565 command_que_value = tw_dev->command_packet_physical_address[request_id];
1566 if (command_que_value == 0) {
1567 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet physical address.\n");
1571 /* Now try to post the command packet */
1572 tw_post_command_packet(tw_dev, request_id);
1575 } /* End tw_scsiop_mode_sense() */
1577 /* This function is called by the isr to complete a mode sense command */
1578 static int tw_scsiop_mode_sense_complete(TW_Device_Extension *tw_dev, int request_id)
1581 unsigned char *flags;
1582 unsigned char request_buffer[8];
1584 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_mode_sense_complete()\n");
1586 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1587 if (param == NULL) {
1588 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense_complete(): Bad alignment virtual address.\n");
1591 flags = (char *)&(param->data[0]);
1592 memset(request_buffer, 0, sizeof(request_buffer));
1594 request_buffer[0] = 0xf; /* mode data length */
1595 request_buffer[1] = 0; /* default medium type */
1596 request_buffer[2] = 0x10; /* dpo/fua support on */
1597 request_buffer[3] = 0; /* no block descriptors */
1598 request_buffer[4] = 0x8; /* caching page */
1599 request_buffer[5] = 0xa; /* page length */
1601 request_buffer[6] = 0x5; /* WCE on, RCD on */
1603 request_buffer[6] = 0x1; /* WCE off, RCD on */
1604 tw_transfer_internal(tw_dev, request_id, request_buffer,
1605 sizeof(request_buffer));
1608 } /* End tw_scsiop_mode_sense_complete() */
1610 /* This function handles scsi read_capacity commands */
1611 static int tw_scsiop_read_capacity(TW_Device_Extension *tw_dev, int request_id)
1614 TW_Command *command_packet;
1615 unsigned long command_que_value;
1616 unsigned long param_value;
1618 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity()\n");
1620 /* Initialize command packet */
1621 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1623 if (command_packet == NULL) {
1624 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet virtual address.\n");
1627 memset(command_packet, 0, sizeof(TW_Sector));
1628 command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1629 command_packet->size = 4;
1630 command_packet->request_id = request_id;
1631 command_packet->unit__hostid = TW_UNITHOST_IN(0, tw_dev->srb[request_id]->device->id);
1632 command_packet->status = 0;
1633 command_packet->flags = 0;
1634 command_packet->byte6.block_count = 1;
1636 /* Now setup the param */
1637 if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1638 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment virtual address.\n");
1641 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1642 memset(param, 0, sizeof(TW_Sector));
1643 param->table_id = TW_UNIT_INFORMATION_TABLE_BASE +
1644 tw_dev->srb[request_id]->device->id;
1645 param->parameter_id = 4; /* unitcapacity parameter */
1646 param->parameter_size_bytes = 4;
1647 param_value = tw_dev->alignment_physical_address[request_id];
1648 if (param_value == 0) {
1649 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment physical address.\n");
1653 command_packet->byte8.param.sgl[0].address = param_value;
1654 command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1655 command_que_value = tw_dev->command_packet_physical_address[request_id];
1656 if (command_que_value == 0) {
1657 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet physical address.\n");
1661 /* Now try to post the command to the board */
1662 tw_post_command_packet(tw_dev, request_id);
1665 } /* End tw_scsiop_read_capacity() */
1667 /* This function is called by the isr to complete a readcapacity command */
1668 static int tw_scsiop_read_capacity_complete(TW_Device_Extension *tw_dev, int request_id)
1670 unsigned char *param_data;
1675 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete()\n");
1677 memset(buff, 0, sizeof(buff));
1678 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1679 if (param == NULL) {
1680 printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_capacity_complete(): Bad alignment virtual address.\n");
1683 param_data = &(param->data[0]);
1685 capacity = (param_data[3] << 24) | (param_data[2] << 16) |
1686 (param_data[1] << 8) | param_data[0];
1688 /* Subtract one sector to fix get last sector ioctl */
1691 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete(): Capacity = 0x%x.\n", capacity);
1693 /* Number of LBA's */
1694 buff[0] = (capacity >> 24);
1695 buff[1] = (capacity >> 16) & 0xff;
1696 buff[2] = (capacity >> 8) & 0xff;
1697 buff[3] = capacity & 0xff;
1699 /* Block size in bytes (512) */
1700 buff[4] = (TW_BLOCK_SIZE >> 24);
1701 buff[5] = (TW_BLOCK_SIZE >> 16) & 0xff;
1702 buff[6] = (TW_BLOCK_SIZE >> 8) & 0xff;
1703 buff[7] = TW_BLOCK_SIZE & 0xff;
1705 tw_transfer_internal(tw_dev, request_id, buff, sizeof(buff));
1708 } /* End tw_scsiop_read_capacity_complete() */
1710 /* This function handles scsi read or write commands */
1711 static int tw_scsiop_read_write(TW_Device_Extension *tw_dev, int request_id)
1713 TW_Command *command_packet;
1714 unsigned long command_que_value;
1715 u32 lba = 0x0, num_sectors = 0x0;
1717 struct scsi_cmnd *srb;
1718 struct scatterlist *sglist, *sg;
1720 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write()\n");
1722 srb = tw_dev->srb[request_id];
1724 sglist = scsi_sglist(srb);
1726 printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Request buffer NULL.\n");
1730 /* Initialize command packet */
1731 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1732 if (command_packet == NULL) {
1733 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): Bad command packet virtual address.\n");
1737 if (srb->cmnd[0] == READ_6 || srb->cmnd[0] == READ_10) {
1738 command_packet->opcode__sgloffset = TW_OPSGL_IN(3, TW_OP_READ);
1740 command_packet->opcode__sgloffset = TW_OPSGL_IN(3, TW_OP_WRITE);
1743 command_packet->size = 3;
1744 command_packet->request_id = request_id;
1745 command_packet->unit__hostid = TW_UNITHOST_IN(0, srb->device->id);
1746 command_packet->status = 0;
1747 command_packet->flags = 0;
1749 if (srb->cmnd[0] == WRITE_10) {
1750 if ((srb->cmnd[1] & 0x8) || (srb->cmnd[1] & 0x10))
1751 command_packet->flags = 1;
1754 if (srb->cmnd[0] == READ_6 || srb->cmnd[0] == WRITE_6) {
1755 lba = ((u32)srb->cmnd[1] << 16) | ((u32)srb->cmnd[2] << 8) | (u32)srb->cmnd[3];
1756 num_sectors = (u32)srb->cmnd[4];
1758 lba = ((u32)srb->cmnd[2] << 24) | ((u32)srb->cmnd[3] << 16) | ((u32)srb->cmnd[4] << 8) | (u32)srb->cmnd[5];
1759 num_sectors = (u32)srb->cmnd[8] | ((u32)srb->cmnd[7] << 8);
1762 /* Update sector statistic */
1763 tw_dev->sector_count = num_sectors;
1764 if (tw_dev->sector_count > tw_dev->max_sector_count)
1765 tw_dev->max_sector_count = tw_dev->sector_count;
1767 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): lba = 0x%x num_sectors = 0x%x\n", lba, num_sectors);
1768 command_packet->byte8.io.lba = lba;
1769 command_packet->byte6.block_count = num_sectors;
1771 use_sg = tw_map_scsi_sg_data(tw_dev->tw_pci_dev, tw_dev->srb[request_id]);
1775 scsi_for_each_sg(tw_dev->srb[request_id], sg, use_sg, i) {
1776 command_packet->byte8.io.sgl[i].address = sg_dma_address(sg);
1777 command_packet->byte8.io.sgl[i].length = sg_dma_len(sg);
1778 command_packet->size+=2;
1781 /* Update SG statistics */
1782 tw_dev->sgl_entries = scsi_sg_count(tw_dev->srb[request_id]);
1783 if (tw_dev->sgl_entries > tw_dev->max_sgl_entries)
1784 tw_dev->max_sgl_entries = tw_dev->sgl_entries;
1786 command_que_value = tw_dev->command_packet_physical_address[request_id];
1787 if (command_que_value == 0) {
1788 dprintk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Bad command packet physical address.\n");
1792 /* Now try to post the command to the board */
1793 tw_post_command_packet(tw_dev, request_id);
1796 } /* End tw_scsiop_read_write() */
1798 /* This function will handle the request sense scsi command */
1799 static int tw_scsiop_request_sense(TW_Device_Extension *tw_dev, int request_id)
1801 char request_buffer[18];
1803 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_request_sense()\n");
1805 memset(request_buffer, 0, sizeof(request_buffer));
1806 request_buffer[0] = 0x70; /* Immediate fixed format */
1807 request_buffer[7] = 10; /* minimum size per SPC: 18 bytes */
1808 /* leave all other fields zero, giving effectively NO_SENSE return */
1809 tw_transfer_internal(tw_dev, request_id, request_buffer,
1810 sizeof(request_buffer));
1812 tw_dev->state[request_id] = TW_S_COMPLETED;
1813 tw_state_request_finish(tw_dev, request_id);
1815 /* If we got a request_sense, we probably want a reset, return error */
1816 tw_dev->srb[request_id]->result = (DID_ERROR << 16);
1817 tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
1820 } /* End tw_scsiop_request_sense() */
1822 /* This function will handle synchronize cache scsi command */
1823 static int tw_scsiop_synchronize_cache(TW_Device_Extension *tw_dev, int request_id)
1825 TW_Command *command_packet;
1826 unsigned long command_que_value;
1828 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_synchronize_cache()\n");
1830 /* Send firmware flush command for this unit */
1831 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1832 if (command_packet == NULL) {
1833 printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet virtual address.\n");
1837 /* Setup the command packet */
1838 memset(command_packet, 0, sizeof(TW_Sector));
1839 command_packet->opcode__sgloffset = TW_OPSGL_IN(0, TW_OP_FLUSH_CACHE);
1840 command_packet->size = 2;
1841 command_packet->request_id = request_id;
1842 command_packet->unit__hostid = TW_UNITHOST_IN(0, tw_dev->srb[request_id]->device->id);
1843 command_packet->status = 0;
1844 command_packet->flags = 0;
1845 command_packet->byte6.parameter_count = 1;
1846 command_que_value = tw_dev->command_packet_physical_address[request_id];
1847 if (command_que_value == 0) {
1848 printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet physical address.\n");
1852 /* Now try to post the command packet */
1853 tw_post_command_packet(tw_dev, request_id);
1856 } /* End tw_scsiop_synchronize_cache() */
1858 /* This function will handle test unit ready scsi command */
1859 static int tw_scsiop_test_unit_ready(TW_Device_Extension *tw_dev, int request_id)
1862 TW_Command *command_packet;
1863 unsigned long command_que_value;
1864 unsigned long param_value;
1866 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_test_unit_ready()\n");
1868 /* Initialize command packet */
1869 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1870 if (command_packet == NULL) {
1871 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet virtual address.\n");
1874 memset(command_packet, 0, sizeof(TW_Sector));
1875 command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1876 command_packet->size = 4;
1877 command_packet->request_id = request_id;
1878 command_packet->status = 0;
1879 command_packet->flags = 0;
1880 command_packet->byte6.parameter_count = 1;
1882 /* Now setup the param */
1883 if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1884 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment virtual address.\n");
1887 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1888 memset(param, 0, sizeof(TW_Sector));
1889 param->table_id = 3; /* unit summary table */
1890 param->parameter_id = 3; /* unitsstatus parameter */
1891 param->parameter_size_bytes = TW_MAX_UNITS;
1892 param_value = tw_dev->alignment_physical_address[request_id];
1893 if (param_value == 0) {
1894 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment physical address.\n");
1898 command_packet->byte8.param.sgl[0].address = param_value;
1899 command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1900 command_que_value = tw_dev->command_packet_physical_address[request_id];
1901 if (command_que_value == 0) {
1902 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet physical address.\n");
1906 /* Now try to post the command packet */
1907 tw_post_command_packet(tw_dev, request_id);
1910 } /* End tw_scsiop_test_unit_ready() */
1912 /* This function is called by the isr to complete a testunitready command */
1913 static int tw_scsiop_test_unit_ready_complete(TW_Device_Extension *tw_dev, int request_id)
1915 unsigned char *is_unit_present;
1918 dprintk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready_complete()\n");
1920 param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1921 if (param == NULL) {
1922 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready_complete(): Bad alignment virtual address.\n");
1925 is_unit_present = &(param->data[0]);
1927 if (is_unit_present[tw_dev->srb[request_id]->device->id] & TW_UNIT_ONLINE) {
1928 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 1;
1930 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 0;
1931 tw_dev->srb[request_id]->result = (DID_BAD_TARGET << 16);
1932 return TW_ISR_DONT_RESULT;
1936 } /* End tw_scsiop_test_unit_ready_complete() */
1938 /* This is the main scsi queue function to handle scsi opcodes */
1939 static int tw_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
1941 unsigned char *command = SCpnt->cmnd;
1944 TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
1946 /* If we are resetting due to timed out ioctl, report as busy */
1947 if (test_bit(TW_IN_RESET, &tw_dev->flags))
1948 return SCSI_MLQUEUE_HOST_BUSY;
1950 /* Save done function into Scsi_Cmnd struct */
1951 SCpnt->scsi_done = done;
1953 /* Queue the command and get a request id */
1954 tw_state_request_start(tw_dev, &request_id);
1956 /* Save the scsi command for use by the ISR */
1957 tw_dev->srb[request_id] = SCpnt;
1959 /* Initialize phase to zero */
1960 SCpnt->SCp.phase = TW_PHASE_INITIAL;
1967 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ/WRITE.\n");
1968 retval = tw_scsiop_read_write(tw_dev, request_id);
1970 case TEST_UNIT_READY:
1971 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught TEST_UNIT_READY.\n");
1972 retval = tw_scsiop_test_unit_ready(tw_dev, request_id);
1975 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught INQUIRY.\n");
1976 retval = tw_scsiop_inquiry(tw_dev, request_id);
1979 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ_CAPACITY.\n");
1980 retval = tw_scsiop_read_capacity(tw_dev, request_id);
1983 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught REQUEST_SENSE.\n");
1984 retval = tw_scsiop_request_sense(tw_dev, request_id);
1987 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught MODE_SENSE.\n");
1988 retval = tw_scsiop_mode_sense(tw_dev, request_id);
1990 case SYNCHRONIZE_CACHE:
1991 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught SYNCHRONIZE_CACHE.\n");
1992 retval = tw_scsiop_synchronize_cache(tw_dev, request_id);
1995 printk(KERN_WARNING "3w-xxxx: SCSI_IOCTL_SEND_COMMAND deprecated, please update your 3ware tools.\n");
1998 printk(KERN_NOTICE "3w-xxxx: scsi%d: Unknown scsi opcode: 0x%x\n", tw_dev->host->host_no, *command);
1999 tw_dev->state[request_id] = TW_S_COMPLETED;
2000 tw_state_request_finish(tw_dev, request_id);
2001 SCpnt->result = (DID_BAD_TARGET << 16);
2006 tw_dev->state[request_id] = TW_S_COMPLETED;
2007 tw_state_request_finish(tw_dev, request_id);
2008 SCpnt->result = (DID_ERROR << 16);
2013 } /* End tw_scsi_queue() */
2015 /* This function is the interrupt service routine */
2016 static irqreturn_t tw_interrupt(int irq, void *dev_instance)
2019 u32 status_reg_value;
2020 TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance;
2021 TW_Response_Queue response_que;
2022 int error = 0, retval = 0;
2023 TW_Command *command_packet;
2026 /* Get the host lock for io completions */
2027 spin_lock(tw_dev->host->host_lock);
2029 /* Read the registers */
2030 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
2032 /* Check if this is our interrupt, otherwise bail */
2033 if (!(status_reg_value & TW_STATUS_VALID_INTERRUPT))
2034 goto tw_interrupt_bail;
2038 /* If we are resetting, bail */
2039 if (test_bit(TW_IN_RESET, &tw_dev->flags))
2040 goto tw_interrupt_bail;
2042 /* Check controller for errors */
2043 if (tw_check_bits(status_reg_value)) {
2044 dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n");
2045 if (tw_decode_bits(tw_dev, status_reg_value, 1)) {
2046 TW_CLEAR_ALL_INTERRUPTS(tw_dev);
2047 goto tw_interrupt_bail;
2051 /* Handle host interrupt */
2052 if (status_reg_value & TW_STATUS_HOST_INTERRUPT) {
2053 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received host interrupt.\n");
2054 TW_CLEAR_HOST_INTERRUPT(tw_dev);
2057 /* Handle attention interrupt */
2058 if (status_reg_value & TW_STATUS_ATTENTION_INTERRUPT) {
2059 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received attention interrupt.\n");
2060 TW_CLEAR_ATTENTION_INTERRUPT(tw_dev);
2061 tw_state_request_start(tw_dev, &request_id);
2062 error = tw_aen_read_queue(tw_dev, request_id);
2064 printk(KERN_WARNING "3w-xxxx: scsi%d: Error reading aen queue.\n", tw_dev->host->host_no);
2065 tw_dev->state[request_id] = TW_S_COMPLETED;
2066 tw_state_request_finish(tw_dev, request_id);
2070 /* Handle command interrupt */
2071 if (status_reg_value & TW_STATUS_COMMAND_INTERRUPT) {
2072 /* Drain as many pending commands as we can */
2073 while (tw_dev->pending_request_count > 0) {
2074 request_id = tw_dev->pending_queue[tw_dev->pending_head];
2075 if (tw_dev->state[request_id] != TW_S_PENDING) {
2076 printk(KERN_WARNING "3w-xxxx: scsi%d: Found request id that wasn't pending.\n", tw_dev->host->host_no);
2079 if (tw_post_command_packet(tw_dev, request_id)==0) {
2080 if (tw_dev->pending_head == TW_Q_LENGTH-1) {
2081 tw_dev->pending_head = TW_Q_START;
2083 tw_dev->pending_head = tw_dev->pending_head + 1;
2085 tw_dev->pending_request_count--;
2087 /* If we get here, we will continue re-posting on the next command interrupt */
2091 /* If there are no more pending requests, we mask command interrupt */
2092 if (tw_dev->pending_request_count == 0)
2093 TW_MASK_COMMAND_INTERRUPT(tw_dev);
2096 /* Handle response interrupt */
2097 if (status_reg_value & TW_STATUS_RESPONSE_INTERRUPT) {
2098 /* Drain the response queue from the board */
2099 while ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) {
2100 /* Read response queue register */
2101 response_que.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
2102 request_id = TW_RESID_OUT(response_que.response_id);
2103 command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
2106 /* Check for bad response */
2107 if (command_packet->status != 0) {
2108 /* If internal command, don't error, don't fill sense */
2109 if (tw_dev->srb[request_id] == NULL) {
2110 tw_decode_sense(tw_dev, request_id, 0);
2112 error = tw_decode_sense(tw_dev, request_id, 1);
2116 /* Check for correct state */
2117 if (tw_dev->state[request_id] != TW_S_POSTED) {
2118 if (tw_dev->srb[request_id] != NULL) {
2119 printk(KERN_WARNING "3w-xxxx: scsi%d: Received a request id that wasn't posted.\n", tw_dev->host->host_no);
2124 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Response queue request id: %d.\n", request_id);
2126 /* Check for internal command completion */
2127 if (tw_dev->srb[request_id] == NULL) {
2128 dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Found internally posted command.\n");
2129 /* Check for chrdev ioctl completion */
2130 if (request_id != tw_dev->chrdev_request_id) {
2131 retval = tw_aen_complete(tw_dev, request_id);
2133 printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing aen.\n", tw_dev->host->host_no);
2136 tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
2137 wake_up(&tw_dev->ioctl_wqueue);
2140 switch (tw_dev->srb[request_id]->cmnd[0]) {
2143 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_10/READ_6\n");
2147 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught WRITE_10/WRITE_6\n");
2149 case TEST_UNIT_READY:
2150 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught TEST_UNIT_READY\n");
2151 error = tw_scsiop_test_unit_ready_complete(tw_dev, request_id);
2154 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught INQUIRY\n");
2155 error = tw_scsiop_inquiry_complete(tw_dev, request_id);
2158 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_CAPACITY\n");
2159 error = tw_scsiop_read_capacity_complete(tw_dev, request_id);
2162 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught MODE_SENSE\n");
2163 error = tw_scsiop_mode_sense_complete(tw_dev, request_id);
2165 case SYNCHRONIZE_CACHE:
2166 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught SYNCHRONIZE_CACHE\n");
2169 printk(KERN_WARNING "3w-xxxx: case slip in tw_interrupt()\n");
2173 /* If no error command was a success */
2175 tw_dev->srb[request_id]->result = (DID_OK << 16);
2178 /* If error, command failed */
2180 /* Ask for a host reset */
2181 tw_dev->srb[request_id]->result = (DID_OK << 16) | (CHECK_CONDITION << 1);
2184 /* Now complete the io */
2185 if ((error != TW_ISR_DONT_COMPLETE)) {
2186 tw_dev->state[request_id] = TW_S_COMPLETED;
2187 tw_state_request_finish(tw_dev, request_id);
2188 tw_dev->posted_request_count--;
2189 tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
2191 tw_unmap_scsi_data(tw_dev->tw_pci_dev, tw_dev->srb[request_id]);
2195 /* Check for valid status after each drain */
2196 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
2197 if (tw_check_bits(status_reg_value)) {
2198 dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n");
2199 if (tw_decode_bits(tw_dev, status_reg_value, 1)) {
2200 TW_CLEAR_ALL_INTERRUPTS(tw_dev);
2201 goto tw_interrupt_bail;
2208 spin_unlock(tw_dev->host->host_lock);
2209 return IRQ_RETVAL(handled);
2210 } /* End tw_interrupt() */
2212 /* This function tells the controller to shut down */
2213 static void __tw_shutdown(TW_Device_Extension *tw_dev)
2215 /* Disable interrupts */
2216 TW_DISABLE_INTERRUPTS(tw_dev);
2218 /* Free up the IRQ */
2219 free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
2221 printk(KERN_WARNING "3w-xxxx: Shutting down host %d.\n", tw_dev->host->host_no);
2223 /* Tell the card we are shutting down */
2224 if (tw_initconnection(tw_dev, 1)) {
2225 printk(KERN_WARNING "3w-xxxx: Connection shutdown failed.\n");
2227 printk(KERN_WARNING "3w-xxxx: Shutdown complete.\n");
2230 /* Clear all interrupts just before exit */
2231 TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
2232 } /* End __tw_shutdown() */
2234 /* Wrapper for __tw_shutdown */
2235 static void tw_shutdown(struct pci_dev *pdev)
2237 struct Scsi_Host *host = pci_get_drvdata(pdev);
2238 TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
2240 __tw_shutdown(tw_dev);
2241 } /* End tw_shutdown() */
2243 static struct scsi_host_template driver_template = {
2244 .module = THIS_MODULE,
2245 .name = "3ware Storage Controller",
2246 .queuecommand = tw_scsi_queue,
2247 .eh_host_reset_handler = tw_scsi_eh_reset,
2248 .bios_param = tw_scsi_biosparam,
2249 .change_queue_depth = tw_change_queue_depth,
2250 .can_queue = TW_Q_LENGTH-2,
2252 .sg_tablesize = TW_MAX_SGL_LENGTH,
2253 .max_sectors = TW_MAX_SECTORS,
2254 .cmd_per_lun = TW_MAX_CMDS_PER_LUN,
2255 .use_clustering = ENABLE_CLUSTERING,
2256 .shost_attrs = tw_host_attrs,
2260 /* This function will probe and initialize a card */
2261 static int __devinit tw_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
2263 struct Scsi_Host *host = NULL;
2264 TW_Device_Extension *tw_dev;
2265 int retval = -ENODEV;
2267 retval = pci_enable_device(pdev);
2269 printk(KERN_WARNING "3w-xxxx: Failed to enable pci device.");
2270 goto out_disable_device;
2273 pci_set_master(pdev);
2275 retval = pci_set_dma_mask(pdev, TW_DMA_MASK);
2277 printk(KERN_WARNING "3w-xxxx: Failed to set dma mask.");
2278 goto out_disable_device;
2281 host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension));
2283 printk(KERN_WARNING "3w-xxxx: Failed to allocate memory for device extension.");
2285 goto out_disable_device;
2287 tw_dev = (TW_Device_Extension *)host->hostdata;
2289 /* Save values to device extension */
2290 tw_dev->host = host;
2291 tw_dev->tw_pci_dev = pdev;
2293 if (tw_initialize_device_extension(tw_dev)) {
2294 printk(KERN_WARNING "3w-xxxx: Failed to initialize device extension.");
2295 goto out_free_device_extension;
2298 /* Request IO regions */
2299 retval = pci_request_regions(pdev, "3w-xxxx");
2301 printk(KERN_WARNING "3w-xxxx: Failed to get mem region.");
2302 goto out_free_device_extension;
2305 /* Save base address */
2306 tw_dev->base_addr = pci_resource_start(pdev, 0);
2307 if (!tw_dev->base_addr) {
2308 printk(KERN_WARNING "3w-xxxx: Failed to get io address.");
2309 goto out_release_mem_region;
2312 /* Disable interrupts on the card */
2313 TW_DISABLE_INTERRUPTS(tw_dev);
2315 /* Initialize the card */
2316 if (tw_reset_sequence(tw_dev))
2317 goto out_release_mem_region;
2319 /* Set host specific parameters */
2320 host->max_id = TW_MAX_UNITS;
2321 host->max_cmd_len = TW_MAX_CDB_LEN;
2323 /* Luns and channels aren't supported by adapter */
2325 host->max_channel = 0;
2327 /* Register the card with the kernel SCSI layer */
2328 retval = scsi_add_host(host, &pdev->dev);
2330 printk(KERN_WARNING "3w-xxxx: scsi add host failed");
2331 goto out_release_mem_region;
2334 pci_set_drvdata(pdev, host);
2336 printk(KERN_WARNING "3w-xxxx: scsi%d: Found a 3ware Storage Controller at 0x%x, IRQ: %d.\n", host->host_no, tw_dev->base_addr, pdev->irq);
2338 /* Now setup the interrupt handler */
2339 retval = request_irq(pdev->irq, tw_interrupt, IRQF_SHARED, "3w-xxxx", tw_dev);
2341 printk(KERN_WARNING "3w-xxxx: Error requesting IRQ.");
2342 goto out_remove_host;
2345 tw_device_extension_list[tw_device_extension_count] = tw_dev;
2346 tw_device_extension_count++;
2348 /* Re-enable interrupts on the card */
2349 TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
2351 /* Finally, scan the host */
2352 scsi_scan_host(host);
2354 if (twe_major == -1) {
2355 if ((twe_major = register_chrdev (0, "twe", &tw_fops)) < 0)
2356 printk(KERN_WARNING "3w-xxxx: Failed to register character device.");
2361 scsi_remove_host(host);
2362 out_release_mem_region:
2363 pci_release_regions(pdev);
2364 out_free_device_extension:
2365 tw_free_device_extension(tw_dev);
2366 scsi_host_put(host);
2368 pci_disable_device(pdev);
2371 } /* End tw_probe() */
2373 /* This function is called to remove a device */
2374 static void tw_remove(struct pci_dev *pdev)
2376 struct Scsi_Host *host = pci_get_drvdata(pdev);
2377 TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
2379 scsi_remove_host(tw_dev->host);
2381 /* Unregister character device */
2382 if (twe_major >= 0) {
2383 unregister_chrdev(twe_major, "twe");
2387 /* Shutdown the card */
2388 __tw_shutdown(tw_dev);
2390 /* Free up the mem region */
2391 pci_release_regions(pdev);
2393 /* Free up device extension resources */
2394 tw_free_device_extension(tw_dev);
2396 scsi_host_put(tw_dev->host);
2397 pci_disable_device(pdev);
2398 tw_device_extension_count--;
2399 } /* End tw_remove() */
2401 /* PCI Devices supported by this driver */
2402 static struct pci_device_id tw_pci_tbl[] __devinitdata = {
2403 { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_1000,
2404 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2405 { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_7000,
2406 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2409 MODULE_DEVICE_TABLE(pci, tw_pci_tbl);
2411 /* pci_driver initializer */
2412 static struct pci_driver tw_driver = {
2414 .id_table = tw_pci_tbl,
2416 .remove = tw_remove,
2417 .shutdown = tw_shutdown,
2420 /* This function is called on driver initialization */
2421 static int __init tw_init(void)
2423 printk(KERN_WARNING "3ware Storage Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION);
2425 return pci_register_driver(&tw_driver);
2426 } /* End tw_init() */
2428 /* This function is called on driver exit */
2429 static void __exit tw_exit(void)
2431 pci_unregister_driver(&tw_driver);
2432 } /* End tw_exit() */
2434 module_init(tw_init);
2435 module_exit(tw_exit);