[netdrvr] Trim trailing whitespace for several drivers
[linux-2.6] / drivers / net / s2io.c
1 /************************************************************************
2  * s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC
3  * Copyright(c) 2002-2007 Neterion Inc.
4
5  * This software may be used and distributed according to the terms of
6  * the GNU General Public License (GPL), incorporated herein by reference.
7  * Drivers based on or derived from this code fall under the GPL and must
8  * retain the authorship, copyright and license notice.  This file is not
9  * a complete program and may only be used when the entire operating
10  * system is licensed under the GPL.
11  * See the file COPYING in this distribution for more information.
12  *
13  * Credits:
14  * Jeff Garzik          : For pointing out the improper error condition
15  *                        check in the s2io_xmit routine and also some
16  *                        issues in the Tx watch dog function. Also for
17  *                        patiently answering all those innumerable
18  *                        questions regaring the 2.6 porting issues.
19  * Stephen Hemminger    : Providing proper 2.6 porting mechanism for some
20  *                        macros available only in 2.6 Kernel.
21  * Francois Romieu      : For pointing out all code part that were
22  *                        deprecated and also styling related comments.
23  * Grant Grundler       : For helping me get rid of some Architecture
24  *                        dependent code.
25  * Christopher Hellwig  : Some more 2.6 specific issues in the driver.
26  *
27  * The module loadable parameters that are supported by the driver and a brief
28  * explaination of all the variables.
29  *
30  * rx_ring_num : This can be used to program the number of receive rings used
31  * in the driver.
32  * rx_ring_sz: This defines the number of receive blocks each ring can have.
33  *     This is also an array of size 8.
34  * rx_ring_mode: This defines the operation mode of all 8 rings. The valid
35  *              values are 1, 2.
36  * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
37  * tx_fifo_len: This too is an array of 8. Each element defines the number of
38  * Tx descriptors that can be associated with each corresponding FIFO.
39  * intr_type: This defines the type of interrupt. The values can be 0(INTA),
40  *     2(MSI_X). Default value is '2(MSI_X)'
41  * lro_enable: Specifies whether to enable Large Receive Offload (LRO) or not.
42  *     Possible values '1' for enable '0' for disable. Default is '0'
43  * lro_max_pkts: This parameter defines maximum number of packets can be
44  *     aggregated as a single large packet
45  * napi: This parameter used to enable/disable NAPI (polling Rx)
46  *     Possible values '1' for enable and '0' for disable. Default is '1'
47  * ufo: This parameter used to enable/disable UDP Fragmentation Offload(UFO)
48  *      Possible values '1' for enable and '0' for disable. Default is '0'
49  * vlan_tag_strip: This can be used to enable or disable vlan stripping.
50  *                 Possible values '1' for enable , '0' for disable.
51  *                 Default is '2' - which means disable in promisc mode
52  *                 and enable in non-promiscuous mode.
53  * multiq: This parameter used to enable/disable MULTIQUEUE support.
54  *      Possible values '1' for enable and '0' for disable. Default is '0'
55  ************************************************************************/
56
57 #include <linux/module.h>
58 #include <linux/types.h>
59 #include <linux/errno.h>
60 #include <linux/ioport.h>
61 #include <linux/pci.h>
62 #include <linux/dma-mapping.h>
63 #include <linux/kernel.h>
64 #include <linux/netdevice.h>
65 #include <linux/etherdevice.h>
66 #include <linux/skbuff.h>
67 #include <linux/init.h>
68 #include <linux/delay.h>
69 #include <linux/stddef.h>
70 #include <linux/ioctl.h>
71 #include <linux/timex.h>
72 #include <linux/ethtool.h>
73 #include <linux/workqueue.h>
74 #include <linux/if_vlan.h>
75 #include <linux/ip.h>
76 #include <linux/tcp.h>
77 #include <net/tcp.h>
78
79 #include <asm/system.h>
80 #include <asm/uaccess.h>
81 #include <asm/io.h>
82 #include <asm/div64.h>
83 #include <asm/irq.h>
84
85 /* local include */
86 #include "s2io.h"
87 #include "s2io-regs.h"
88
89 #define DRV_VERSION "2.0.26.23"
90
91 /* S2io Driver name & version. */
92 static char s2io_driver_name[] = "Neterion";
93 static char s2io_driver_version[] = DRV_VERSION;
94
95 static int rxd_size[2] = {32,48};
96 static int rxd_count[2] = {127,85};
97
98 static inline int RXD_IS_UP2DT(struct RxD_t *rxdp)
99 {
100         int ret;
101
102         ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
103                 (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK));
104
105         return ret;
106 }
107
108 /*
109  * Cards with following subsystem_id have a link state indication
110  * problem, 600B, 600C, 600D, 640B, 640C and 640D.
111  * macro below identifies these cards given the subsystem_id.
112  */
113 #define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \
114         (dev_type == XFRAME_I_DEVICE) ?                 \
115                 ((((subid >= 0x600B) && (subid <= 0x600D)) || \
116                  ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0
117
118 #define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
119                                       ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
120
121 static inline int is_s2io_card_up(const struct s2io_nic * sp)
122 {
123         return test_bit(__S2IO_STATE_CARD_UP, &sp->state);
124 }
125
126 /* Ethtool related variables and Macros. */
127 static char s2io_gstrings[][ETH_GSTRING_LEN] = {
128         "Register test\t(offline)",
129         "Eeprom test\t(offline)",
130         "Link test\t(online)",
131         "RLDRAM test\t(offline)",
132         "BIST Test\t(offline)"
133 };
134
135 static char ethtool_xena_stats_keys[][ETH_GSTRING_LEN] = {
136         {"tmac_frms"},
137         {"tmac_data_octets"},
138         {"tmac_drop_frms"},
139         {"tmac_mcst_frms"},
140         {"tmac_bcst_frms"},
141         {"tmac_pause_ctrl_frms"},
142         {"tmac_ttl_octets"},
143         {"tmac_ucst_frms"},
144         {"tmac_nucst_frms"},
145         {"tmac_any_err_frms"},
146         {"tmac_ttl_less_fb_octets"},
147         {"tmac_vld_ip_octets"},
148         {"tmac_vld_ip"},
149         {"tmac_drop_ip"},
150         {"tmac_icmp"},
151         {"tmac_rst_tcp"},
152         {"tmac_tcp"},
153         {"tmac_udp"},
154         {"rmac_vld_frms"},
155         {"rmac_data_octets"},
156         {"rmac_fcs_err_frms"},
157         {"rmac_drop_frms"},
158         {"rmac_vld_mcst_frms"},
159         {"rmac_vld_bcst_frms"},
160         {"rmac_in_rng_len_err_frms"},
161         {"rmac_out_rng_len_err_frms"},
162         {"rmac_long_frms"},
163         {"rmac_pause_ctrl_frms"},
164         {"rmac_unsup_ctrl_frms"},
165         {"rmac_ttl_octets"},
166         {"rmac_accepted_ucst_frms"},
167         {"rmac_accepted_nucst_frms"},
168         {"rmac_discarded_frms"},
169         {"rmac_drop_events"},
170         {"rmac_ttl_less_fb_octets"},
171         {"rmac_ttl_frms"},
172         {"rmac_usized_frms"},
173         {"rmac_osized_frms"},
174         {"rmac_frag_frms"},
175         {"rmac_jabber_frms"},
176         {"rmac_ttl_64_frms"},
177         {"rmac_ttl_65_127_frms"},
178         {"rmac_ttl_128_255_frms"},
179         {"rmac_ttl_256_511_frms"},
180         {"rmac_ttl_512_1023_frms"},
181         {"rmac_ttl_1024_1518_frms"},
182         {"rmac_ip"},
183         {"rmac_ip_octets"},
184         {"rmac_hdr_err_ip"},
185         {"rmac_drop_ip"},
186         {"rmac_icmp"},
187         {"rmac_tcp"},
188         {"rmac_udp"},
189         {"rmac_err_drp_udp"},
190         {"rmac_xgmii_err_sym"},
191         {"rmac_frms_q0"},
192         {"rmac_frms_q1"},
193         {"rmac_frms_q2"},
194         {"rmac_frms_q3"},
195         {"rmac_frms_q4"},
196         {"rmac_frms_q5"},
197         {"rmac_frms_q6"},
198         {"rmac_frms_q7"},
199         {"rmac_full_q0"},
200         {"rmac_full_q1"},
201         {"rmac_full_q2"},
202         {"rmac_full_q3"},
203         {"rmac_full_q4"},
204         {"rmac_full_q5"},
205         {"rmac_full_q6"},
206         {"rmac_full_q7"},
207         {"rmac_pause_cnt"},
208         {"rmac_xgmii_data_err_cnt"},
209         {"rmac_xgmii_ctrl_err_cnt"},
210         {"rmac_accepted_ip"},
211         {"rmac_err_tcp"},
212         {"rd_req_cnt"},
213         {"new_rd_req_cnt"},
214         {"new_rd_req_rtry_cnt"},
215         {"rd_rtry_cnt"},
216         {"wr_rtry_rd_ack_cnt"},
217         {"wr_req_cnt"},
218         {"new_wr_req_cnt"},
219         {"new_wr_req_rtry_cnt"},
220         {"wr_rtry_cnt"},
221         {"wr_disc_cnt"},
222         {"rd_rtry_wr_ack_cnt"},
223         {"txp_wr_cnt"},
224         {"txd_rd_cnt"},
225         {"txd_wr_cnt"},
226         {"rxd_rd_cnt"},
227         {"rxd_wr_cnt"},
228         {"txf_rd_cnt"},
229         {"rxf_wr_cnt"}
230 };
231
232 static char ethtool_enhanced_stats_keys[][ETH_GSTRING_LEN] = {
233         {"rmac_ttl_1519_4095_frms"},
234         {"rmac_ttl_4096_8191_frms"},
235         {"rmac_ttl_8192_max_frms"},
236         {"rmac_ttl_gt_max_frms"},
237         {"rmac_osized_alt_frms"},
238         {"rmac_jabber_alt_frms"},
239         {"rmac_gt_max_alt_frms"},
240         {"rmac_vlan_frms"},
241         {"rmac_len_discard"},
242         {"rmac_fcs_discard"},
243         {"rmac_pf_discard"},
244         {"rmac_da_discard"},
245         {"rmac_red_discard"},
246         {"rmac_rts_discard"},
247         {"rmac_ingm_full_discard"},
248         {"link_fault_cnt"}
249 };
250
251 static char ethtool_driver_stats_keys[][ETH_GSTRING_LEN] = {
252         {"\n DRIVER STATISTICS"},
253         {"single_bit_ecc_errs"},
254         {"double_bit_ecc_errs"},
255         {"parity_err_cnt"},
256         {"serious_err_cnt"},
257         {"soft_reset_cnt"},
258         {"fifo_full_cnt"},
259         {"ring_0_full_cnt"},
260         {"ring_1_full_cnt"},
261         {"ring_2_full_cnt"},
262         {"ring_3_full_cnt"},
263         {"ring_4_full_cnt"},
264         {"ring_5_full_cnt"},
265         {"ring_6_full_cnt"},
266         {"ring_7_full_cnt"},
267         {"alarm_transceiver_temp_high"},
268         {"alarm_transceiver_temp_low"},
269         {"alarm_laser_bias_current_high"},
270         {"alarm_laser_bias_current_low"},
271         {"alarm_laser_output_power_high"},
272         {"alarm_laser_output_power_low"},
273         {"warn_transceiver_temp_high"},
274         {"warn_transceiver_temp_low"},
275         {"warn_laser_bias_current_high"},
276         {"warn_laser_bias_current_low"},
277         {"warn_laser_output_power_high"},
278         {"warn_laser_output_power_low"},
279         {"lro_aggregated_pkts"},
280         {"lro_flush_both_count"},
281         {"lro_out_of_sequence_pkts"},
282         {"lro_flush_due_to_max_pkts"},
283         {"lro_avg_aggr_pkts"},
284         {"mem_alloc_fail_cnt"},
285         {"pci_map_fail_cnt"},
286         {"watchdog_timer_cnt"},
287         {"mem_allocated"},
288         {"mem_freed"},
289         {"link_up_cnt"},
290         {"link_down_cnt"},
291         {"link_up_time"},
292         {"link_down_time"},
293         {"tx_tcode_buf_abort_cnt"},
294         {"tx_tcode_desc_abort_cnt"},
295         {"tx_tcode_parity_err_cnt"},
296         {"tx_tcode_link_loss_cnt"},
297         {"tx_tcode_list_proc_err_cnt"},
298         {"rx_tcode_parity_err_cnt"},
299         {"rx_tcode_abort_cnt"},
300         {"rx_tcode_parity_abort_cnt"},
301         {"rx_tcode_rda_fail_cnt"},
302         {"rx_tcode_unkn_prot_cnt"},
303         {"rx_tcode_fcs_err_cnt"},
304         {"rx_tcode_buf_size_err_cnt"},
305         {"rx_tcode_rxd_corrupt_cnt"},
306         {"rx_tcode_unkn_err_cnt"},
307         {"tda_err_cnt"},
308         {"pfc_err_cnt"},
309         {"pcc_err_cnt"},
310         {"tti_err_cnt"},
311         {"tpa_err_cnt"},
312         {"sm_err_cnt"},
313         {"lso_err_cnt"},
314         {"mac_tmac_err_cnt"},
315         {"mac_rmac_err_cnt"},
316         {"xgxs_txgxs_err_cnt"},
317         {"xgxs_rxgxs_err_cnt"},
318         {"rc_err_cnt"},
319         {"prc_pcix_err_cnt"},
320         {"rpa_err_cnt"},
321         {"rda_err_cnt"},
322         {"rti_err_cnt"},
323         {"mc_err_cnt"}
324 };
325
326 #define S2IO_XENA_STAT_LEN      ARRAY_SIZE(ethtool_xena_stats_keys)
327 #define S2IO_ENHANCED_STAT_LEN  ARRAY_SIZE(ethtool_enhanced_stats_keys)
328 #define S2IO_DRIVER_STAT_LEN    ARRAY_SIZE(ethtool_driver_stats_keys)
329
330 #define XFRAME_I_STAT_LEN (S2IO_XENA_STAT_LEN + S2IO_DRIVER_STAT_LEN )
331 #define XFRAME_II_STAT_LEN (XFRAME_I_STAT_LEN + S2IO_ENHANCED_STAT_LEN )
332
333 #define XFRAME_I_STAT_STRINGS_LEN ( XFRAME_I_STAT_LEN * ETH_GSTRING_LEN )
334 #define XFRAME_II_STAT_STRINGS_LEN ( XFRAME_II_STAT_LEN * ETH_GSTRING_LEN )
335
336 #define S2IO_TEST_LEN   ARRAY_SIZE(s2io_gstrings)
337 #define S2IO_STRINGS_LEN        S2IO_TEST_LEN * ETH_GSTRING_LEN
338
339 #define S2IO_TIMER_CONF(timer, handle, arg, exp)                \
340                         init_timer(&timer);                     \
341                         timer.function = handle;                \
342                         timer.data = (unsigned long) arg;       \
343                         mod_timer(&timer, (jiffies + exp))      \
344
345 /* copy mac addr to def_mac_addr array */
346 static void do_s2io_copy_mac_addr(struct s2io_nic *sp, int offset, u64 mac_addr)
347 {
348         sp->def_mac_addr[offset].mac_addr[5] = (u8) (mac_addr);
349         sp->def_mac_addr[offset].mac_addr[4] = (u8) (mac_addr >> 8);
350         sp->def_mac_addr[offset].mac_addr[3] = (u8) (mac_addr >> 16);
351         sp->def_mac_addr[offset].mac_addr[2] = (u8) (mac_addr >> 24);
352         sp->def_mac_addr[offset].mac_addr[1] = (u8) (mac_addr >> 32);
353         sp->def_mac_addr[offset].mac_addr[0] = (u8) (mac_addr >> 40);
354 }
355 /* Add the vlan */
356 static void s2io_vlan_rx_register(struct net_device *dev,
357                                         struct vlan_group *grp)
358 {
359         int i;
360         struct s2io_nic *nic = dev->priv;
361         unsigned long flags[MAX_TX_FIFOS];
362         struct mac_info *mac_control = &nic->mac_control;
363         struct config_param *config = &nic->config;
364
365         for (i = 0; i < config->tx_fifo_num; i++)
366                 spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags[i]);
367
368         nic->vlgrp = grp;
369         for (i = config->tx_fifo_num - 1; i >= 0; i--)
370                 spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock,
371                                 flags[i]);
372 }
373
374 /* A flag indicating whether 'RX_PA_CFG_STRIP_VLAN_TAG' bit is set or not */
375 static int vlan_strip_flag;
376
377 /* Unregister the vlan */
378 static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
379 {
380         int i;
381         struct s2io_nic *nic = dev->priv;
382         unsigned long flags[MAX_TX_FIFOS];
383         struct mac_info *mac_control = &nic->mac_control;
384         struct config_param *config = &nic->config;
385
386         for (i = 0; i < config->tx_fifo_num; i++)
387                 spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags[i]);
388
389         if (nic->vlgrp)
390                 vlan_group_set_device(nic->vlgrp, vid, NULL);
391
392         for (i = config->tx_fifo_num - 1; i >= 0; i--)
393                 spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock,
394                         flags[i]);
395 }
396
397 /*
398  * Constants to be programmed into the Xena's registers, to configure
399  * the XAUI.
400  */
401
402 #define END_SIGN        0x0
403 static const u64 herc_act_dtx_cfg[] = {
404         /* Set address */
405         0x8000051536750000ULL, 0x80000515367500E0ULL,
406         /* Write data */
407         0x8000051536750004ULL, 0x80000515367500E4ULL,
408         /* Set address */
409         0x80010515003F0000ULL, 0x80010515003F00E0ULL,
410         /* Write data */
411         0x80010515003F0004ULL, 0x80010515003F00E4ULL,
412         /* Set address */
413         0x801205150D440000ULL, 0x801205150D4400E0ULL,
414         /* Write data */
415         0x801205150D440004ULL, 0x801205150D4400E4ULL,
416         /* Set address */
417         0x80020515F2100000ULL, 0x80020515F21000E0ULL,
418         /* Write data */
419         0x80020515F2100004ULL, 0x80020515F21000E4ULL,
420         /* Done */
421         END_SIGN
422 };
423
424 static const u64 xena_dtx_cfg[] = {
425         /* Set address */
426         0x8000051500000000ULL, 0x80000515000000E0ULL,
427         /* Write data */
428         0x80000515D9350004ULL, 0x80000515D93500E4ULL,
429         /* Set address */
430         0x8001051500000000ULL, 0x80010515000000E0ULL,
431         /* Write data */
432         0x80010515001E0004ULL, 0x80010515001E00E4ULL,
433         /* Set address */
434         0x8002051500000000ULL, 0x80020515000000E0ULL,
435         /* Write data */
436         0x80020515F2100004ULL, 0x80020515F21000E4ULL,
437         END_SIGN
438 };
439
440 /*
441  * Constants for Fixing the MacAddress problem seen mostly on
442  * Alpha machines.
443  */
444 static const u64 fix_mac[] = {
445         0x0060000000000000ULL, 0x0060600000000000ULL,
446         0x0040600000000000ULL, 0x0000600000000000ULL,
447         0x0020600000000000ULL, 0x0060600000000000ULL,
448         0x0020600000000000ULL, 0x0060600000000000ULL,
449         0x0020600000000000ULL, 0x0060600000000000ULL,
450         0x0020600000000000ULL, 0x0060600000000000ULL,
451         0x0020600000000000ULL, 0x0060600000000000ULL,
452         0x0020600000000000ULL, 0x0060600000000000ULL,
453         0x0020600000000000ULL, 0x0060600000000000ULL,
454         0x0020600000000000ULL, 0x0060600000000000ULL,
455         0x0020600000000000ULL, 0x0060600000000000ULL,
456         0x0020600000000000ULL, 0x0060600000000000ULL,
457         0x0020600000000000ULL, 0x0000600000000000ULL,
458         0x0040600000000000ULL, 0x0060600000000000ULL,
459         END_SIGN
460 };
461
462 MODULE_LICENSE("GPL");
463 MODULE_VERSION(DRV_VERSION);
464
465
466 /* Module Loadable parameters. */
467 S2IO_PARM_INT(tx_fifo_num, FIFO_DEFAULT_NUM);
468 S2IO_PARM_INT(rx_ring_num, 1);
469 S2IO_PARM_INT(multiq, 0);
470 S2IO_PARM_INT(rx_ring_mode, 1);
471 S2IO_PARM_INT(use_continuous_tx_intrs, 1);
472 S2IO_PARM_INT(rmac_pause_time, 0x100);
473 S2IO_PARM_INT(mc_pause_threshold_q0q3, 187);
474 S2IO_PARM_INT(mc_pause_threshold_q4q7, 187);
475 S2IO_PARM_INT(shared_splits, 0);
476 S2IO_PARM_INT(tmac_util_period, 5);
477 S2IO_PARM_INT(rmac_util_period, 5);
478 S2IO_PARM_INT(l3l4hdr_size, 128);
479 /* 0 is no steering, 1 is Priority steering, 2 is Default steering */
480 S2IO_PARM_INT(tx_steering_type, TX_DEFAULT_STEERING);
481 /* Frequency of Rx desc syncs expressed as power of 2 */
482 S2IO_PARM_INT(rxsync_frequency, 3);
483 /* Interrupt type. Values can be 0(INTA), 2(MSI_X) */
484 S2IO_PARM_INT(intr_type, 2);
485 /* Large receive offload feature */
486 static unsigned int lro_enable;
487 module_param_named(lro, lro_enable, uint, 0);
488
489 /* Max pkts to be aggregated by LRO at one time. If not specified,
490  * aggregation happens until we hit max IP pkt size(64K)
491  */
492 S2IO_PARM_INT(lro_max_pkts, 0xFFFF);
493 S2IO_PARM_INT(indicate_max_pkts, 0);
494
495 S2IO_PARM_INT(napi, 1);
496 S2IO_PARM_INT(ufo, 0);
497 S2IO_PARM_INT(vlan_tag_strip, NO_STRIP_IN_PROMISC);
498
499 static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
500     {DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN};
501 static unsigned int rx_ring_sz[MAX_RX_RINGS] =
502     {[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT};
503 static unsigned int rts_frm_len[MAX_RX_RINGS] =
504     {[0 ...(MAX_RX_RINGS - 1)] = 0 };
505
506 module_param_array(tx_fifo_len, uint, NULL, 0);
507 module_param_array(rx_ring_sz, uint, NULL, 0);
508 module_param_array(rts_frm_len, uint, NULL, 0);
509
510 /*
511  * S2IO device table.
512  * This table lists all the devices that this driver supports.
513  */
514 static struct pci_device_id s2io_tbl[] __devinitdata = {
515         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN,
516          PCI_ANY_ID, PCI_ANY_ID},
517         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
518          PCI_ANY_ID, PCI_ANY_ID},
519         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN,
520          PCI_ANY_ID, PCI_ANY_ID},
521         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
522          PCI_ANY_ID, PCI_ANY_ID},
523         {0,}
524 };
525
526 MODULE_DEVICE_TABLE(pci, s2io_tbl);
527
528 static struct pci_error_handlers s2io_err_handler = {
529         .error_detected = s2io_io_error_detected,
530         .slot_reset = s2io_io_slot_reset,
531         .resume = s2io_io_resume,
532 };
533
534 static struct pci_driver s2io_driver = {
535       .name = "S2IO",
536       .id_table = s2io_tbl,
537       .probe = s2io_init_nic,
538       .remove = __devexit_p(s2io_rem_nic),
539       .err_handler = &s2io_err_handler,
540 };
541
542 /* A simplifier macro used both by init and free shared_mem Fns(). */
543 #define TXD_MEM_PAGE_CNT(len, per_each) ((len+per_each - 1) / per_each)
544
545 /* netqueue manipulation helper functions */
546 static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp)
547 {
548         int i;
549 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
550         if (sp->config.multiq) {
551                 for (i = 0; i < sp->config.tx_fifo_num; i++)
552                         netif_stop_subqueue(sp->dev, i);
553         } else
554 #endif
555         {
556                 for (i = 0; i < sp->config.tx_fifo_num; i++)
557                         sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_STOP;
558                 netif_stop_queue(sp->dev);
559         }
560 }
561
562 static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no)
563 {
564 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
565         if (sp->config.multiq)
566                 netif_stop_subqueue(sp->dev, fifo_no);
567         else
568 #endif
569         {
570                 sp->mac_control.fifos[fifo_no].queue_state =
571                         FIFO_QUEUE_STOP;
572                 netif_stop_queue(sp->dev);
573         }
574 }
575
576 static inline void s2io_start_all_tx_queue(struct s2io_nic *sp)
577 {
578         int i;
579 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
580         if (sp->config.multiq) {
581                 for (i = 0; i < sp->config.tx_fifo_num; i++)
582                         netif_start_subqueue(sp->dev, i);
583         } else
584 #endif
585         {
586                 for (i = 0; i < sp->config.tx_fifo_num; i++)
587                         sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
588                 netif_start_queue(sp->dev);
589         }
590 }
591
592 static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no)
593 {
594 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
595         if (sp->config.multiq)
596                 netif_start_subqueue(sp->dev, fifo_no);
597         else
598 #endif
599         {
600                 sp->mac_control.fifos[fifo_no].queue_state =
601                         FIFO_QUEUE_START;
602                 netif_start_queue(sp->dev);
603         }
604 }
605
606 static inline void s2io_wake_all_tx_queue(struct s2io_nic *sp)
607 {
608         int i;
609 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
610         if (sp->config.multiq) {
611                 for (i = 0; i < sp->config.tx_fifo_num; i++)
612                         netif_wake_subqueue(sp->dev, i);
613         } else
614 #endif
615         {
616                 for (i = 0; i < sp->config.tx_fifo_num; i++)
617                         sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
618                 netif_wake_queue(sp->dev);
619         }
620 }
621
622 static inline void s2io_wake_tx_queue(
623         struct fifo_info *fifo, int cnt, u8 multiq)
624 {
625
626 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
627         if (multiq) {
628                 if (cnt && __netif_subqueue_stopped(fifo->dev, fifo->fifo_no))
629                         netif_wake_subqueue(fifo->dev, fifo->fifo_no);
630         } else
631 #endif
632         if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) {
633                 if (netif_queue_stopped(fifo->dev)) {
634                         fifo->queue_state = FIFO_QUEUE_START;
635                         netif_wake_queue(fifo->dev);
636                 }
637         }
638 }
639
640 /**
641  * init_shared_mem - Allocation and Initialization of Memory
642  * @nic: Device private variable.
643  * Description: The function allocates all the memory areas shared
644  * between the NIC and the driver. This includes Tx descriptors,
645  * Rx descriptors and the statistics block.
646  */
647
648 static int init_shared_mem(struct s2io_nic *nic)
649 {
650         u32 size;
651         void *tmp_v_addr, *tmp_v_addr_next;
652         dma_addr_t tmp_p_addr, tmp_p_addr_next;
653         struct RxD_block *pre_rxd_blk = NULL;
654         int i, j, blk_cnt;
655         int lst_size, lst_per_page;
656         struct net_device *dev = nic->dev;
657         unsigned long tmp;
658         struct buffAdd *ba;
659
660         struct mac_info *mac_control;
661         struct config_param *config;
662         unsigned long long mem_allocated = 0;
663
664         mac_control = &nic->mac_control;
665         config = &nic->config;
666
667
668         /* Allocation and initialization of TXDLs in FIOFs */
669         size = 0;
670         for (i = 0; i < config->tx_fifo_num; i++) {
671                 size += config->tx_cfg[i].fifo_len;
672         }
673         if (size > MAX_AVAILABLE_TXDS) {
674                 DBG_PRINT(ERR_DBG, "s2io: Requested TxDs too high, ");
675                 DBG_PRINT(ERR_DBG, "Requested: %d, max supported: 8192\n", size);
676                 return -EINVAL;
677         }
678
679         size = 0;
680         for (i = 0; i < config->tx_fifo_num; i++) {
681                 size = config->tx_cfg[i].fifo_len;
682                 /*
683                  * Legal values are from 2 to 8192
684                  */
685                 if (size < 2) {
686                         DBG_PRINT(ERR_DBG, "s2io: Invalid fifo len (%d)", size);
687                         DBG_PRINT(ERR_DBG, "for fifo %d\n", i);
688                         DBG_PRINT(ERR_DBG, "s2io: Legal values for fifo len"
689                                 "are 2 to 8192\n");
690                         return -EINVAL;
691                 }
692         }
693
694         lst_size = (sizeof(struct TxD) * config->max_txds);
695         lst_per_page = PAGE_SIZE / lst_size;
696
697         for (i = 0; i < config->tx_fifo_num; i++) {
698                 int fifo_len = config->tx_cfg[i].fifo_len;
699                 int list_holder_size = fifo_len * sizeof(struct list_info_hold);
700                 mac_control->fifos[i].list_info = kzalloc(list_holder_size,
701                                                           GFP_KERNEL);
702                 if (!mac_control->fifos[i].list_info) {
703                         DBG_PRINT(INFO_DBG,
704                                   "Malloc failed for list_info\n");
705                         return -ENOMEM;
706                 }
707                 mem_allocated += list_holder_size;
708         }
709         for (i = 0; i < config->tx_fifo_num; i++) {
710                 int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
711                                                 lst_per_page);
712                 mac_control->fifos[i].tx_curr_put_info.offset = 0;
713                 mac_control->fifos[i].tx_curr_put_info.fifo_len =
714                     config->tx_cfg[i].fifo_len - 1;
715                 mac_control->fifos[i].tx_curr_get_info.offset = 0;
716                 mac_control->fifos[i].tx_curr_get_info.fifo_len =
717                     config->tx_cfg[i].fifo_len - 1;
718                 mac_control->fifos[i].fifo_no = i;
719                 mac_control->fifos[i].nic = nic;
720                 mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 2;
721                 mac_control->fifos[i].dev = dev;
722
723                 for (j = 0; j < page_num; j++) {
724                         int k = 0;
725                         dma_addr_t tmp_p;
726                         void *tmp_v;
727                         tmp_v = pci_alloc_consistent(nic->pdev,
728                                                      PAGE_SIZE, &tmp_p);
729                         if (!tmp_v) {
730                                 DBG_PRINT(INFO_DBG,
731                                           "pci_alloc_consistent ");
732                                 DBG_PRINT(INFO_DBG, "failed for TxDL\n");
733                                 return -ENOMEM;
734                         }
735                         /* If we got a zero DMA address(can happen on
736                          * certain platforms like PPC), reallocate.
737                          * Store virtual address of page we don't want,
738                          * to be freed later.
739                          */
740                         if (!tmp_p) {
741                                 mac_control->zerodma_virt_addr = tmp_v;
742                                 DBG_PRINT(INIT_DBG,
743                                 "%s: Zero DMA address for TxDL. ", dev->name);
744                                 DBG_PRINT(INIT_DBG,
745                                 "Virtual address %p\n", tmp_v);
746                                 tmp_v = pci_alloc_consistent(nic->pdev,
747                                                      PAGE_SIZE, &tmp_p);
748                                 if (!tmp_v) {
749                                         DBG_PRINT(INFO_DBG,
750                                           "pci_alloc_consistent ");
751                                         DBG_PRINT(INFO_DBG, "failed for TxDL\n");
752                                         return -ENOMEM;
753                                 }
754                                 mem_allocated += PAGE_SIZE;
755                         }
756                         while (k < lst_per_page) {
757                                 int l = (j * lst_per_page) + k;
758                                 if (l == config->tx_cfg[i].fifo_len)
759                                         break;
760                                 mac_control->fifos[i].list_info[l].list_virt_addr =
761                                     tmp_v + (k * lst_size);
762                                 mac_control->fifos[i].list_info[l].list_phy_addr =
763                                     tmp_p + (k * lst_size);
764                                 k++;
765                         }
766                 }
767         }
768
769         for (i = 0; i < config->tx_fifo_num; i++) {
770                 size = config->tx_cfg[i].fifo_len;
771                 mac_control->fifos[i].ufo_in_band_v
772                         = kcalloc(size, sizeof(u64), GFP_KERNEL);
773                 if (!mac_control->fifos[i].ufo_in_band_v)
774                         return -ENOMEM;
775                 mem_allocated += (size * sizeof(u64));
776         }
777
778         /* Allocation and initialization of RXDs in Rings */
779         size = 0;
780         for (i = 0; i < config->rx_ring_num; i++) {
781                 if (config->rx_cfg[i].num_rxd %
782                     (rxd_count[nic->rxd_mode] + 1)) {
783                         DBG_PRINT(ERR_DBG, "%s: RxD count of ", dev->name);
784                         DBG_PRINT(ERR_DBG, "Ring%d is not a multiple of ",
785                                   i);
786                         DBG_PRINT(ERR_DBG, "RxDs per Block");
787                         return FAILURE;
788                 }
789                 size += config->rx_cfg[i].num_rxd;
790                 mac_control->rings[i].block_count =
791                         config->rx_cfg[i].num_rxd /
792                         (rxd_count[nic->rxd_mode] + 1 );
793                 mac_control->rings[i].pkt_cnt = config->rx_cfg[i].num_rxd -
794                         mac_control->rings[i].block_count;
795         }
796         if (nic->rxd_mode == RXD_MODE_1)
797                 size = (size * (sizeof(struct RxD1)));
798         else
799                 size = (size * (sizeof(struct RxD3)));
800
801         for (i = 0; i < config->rx_ring_num; i++) {
802                 mac_control->rings[i].rx_curr_get_info.block_index = 0;
803                 mac_control->rings[i].rx_curr_get_info.offset = 0;
804                 mac_control->rings[i].rx_curr_get_info.ring_len =
805                     config->rx_cfg[i].num_rxd - 1;
806                 mac_control->rings[i].rx_curr_put_info.block_index = 0;
807                 mac_control->rings[i].rx_curr_put_info.offset = 0;
808                 mac_control->rings[i].rx_curr_put_info.ring_len =
809                     config->rx_cfg[i].num_rxd - 1;
810                 mac_control->rings[i].nic = nic;
811                 mac_control->rings[i].ring_no = i;
812                 mac_control->rings[i].lro = lro_enable;
813
814                 blk_cnt = config->rx_cfg[i].num_rxd /
815                                 (rxd_count[nic->rxd_mode] + 1);
816                 /*  Allocating all the Rx blocks */
817                 for (j = 0; j < blk_cnt; j++) {
818                         struct rx_block_info *rx_blocks;
819                         int l;
820
821                         rx_blocks = &mac_control->rings[i].rx_blocks[j];
822                         size = SIZE_OF_BLOCK; //size is always page size
823                         tmp_v_addr = pci_alloc_consistent(nic->pdev, size,
824                                                           &tmp_p_addr);
825                         if (tmp_v_addr == NULL) {
826                                 /*
827                                  * In case of failure, free_shared_mem()
828                                  * is called, which should free any
829                                  * memory that was alloced till the
830                                  * failure happened.
831                                  */
832                                 rx_blocks->block_virt_addr = tmp_v_addr;
833                                 return -ENOMEM;
834                         }
835                         mem_allocated += size;
836                         memset(tmp_v_addr, 0, size);
837                         rx_blocks->block_virt_addr = tmp_v_addr;
838                         rx_blocks->block_dma_addr = tmp_p_addr;
839                         rx_blocks->rxds = kmalloc(sizeof(struct rxd_info)*
840                                                   rxd_count[nic->rxd_mode],
841                                                   GFP_KERNEL);
842                         if (!rx_blocks->rxds)
843                                 return -ENOMEM;
844                         mem_allocated +=
845                         (sizeof(struct rxd_info)* rxd_count[nic->rxd_mode]);
846                         for (l=0; l<rxd_count[nic->rxd_mode];l++) {
847                                 rx_blocks->rxds[l].virt_addr =
848                                         rx_blocks->block_virt_addr +
849                                         (rxd_size[nic->rxd_mode] * l);
850                                 rx_blocks->rxds[l].dma_addr =
851                                         rx_blocks->block_dma_addr +
852                                         (rxd_size[nic->rxd_mode] * l);
853                         }
854                 }
855                 /* Interlinking all Rx Blocks */
856                 for (j = 0; j < blk_cnt; j++) {
857                         tmp_v_addr =
858                                 mac_control->rings[i].rx_blocks[j].block_virt_addr;
859                         tmp_v_addr_next =
860                                 mac_control->rings[i].rx_blocks[(j + 1) %
861                                               blk_cnt].block_virt_addr;
862                         tmp_p_addr =
863                                 mac_control->rings[i].rx_blocks[j].block_dma_addr;
864                         tmp_p_addr_next =
865                                 mac_control->rings[i].rx_blocks[(j + 1) %
866                                               blk_cnt].block_dma_addr;
867
868                         pre_rxd_blk = (struct RxD_block *) tmp_v_addr;
869                         pre_rxd_blk->reserved_2_pNext_RxD_block =
870                             (unsigned long) tmp_v_addr_next;
871                         pre_rxd_blk->pNext_RxD_Blk_physical =
872                             (u64) tmp_p_addr_next;
873                 }
874         }
875         if (nic->rxd_mode == RXD_MODE_3B) {
876                 /*
877                  * Allocation of Storages for buffer addresses in 2BUFF mode
878                  * and the buffers as well.
879                  */
880                 for (i = 0; i < config->rx_ring_num; i++) {
881                         blk_cnt = config->rx_cfg[i].num_rxd /
882                            (rxd_count[nic->rxd_mode]+ 1);
883                         mac_control->rings[i].ba =
884                                 kmalloc((sizeof(struct buffAdd *) * blk_cnt),
885                                      GFP_KERNEL);
886                         if (!mac_control->rings[i].ba)
887                                 return -ENOMEM;
888                         mem_allocated +=(sizeof(struct buffAdd *) * blk_cnt);
889                         for (j = 0; j < blk_cnt; j++) {
890                                 int k = 0;
891                                 mac_control->rings[i].ba[j] =
892                                         kmalloc((sizeof(struct buffAdd) *
893                                                 (rxd_count[nic->rxd_mode] + 1)),
894                                                 GFP_KERNEL);
895                                 if (!mac_control->rings[i].ba[j])
896                                         return -ENOMEM;
897                                 mem_allocated += (sizeof(struct buffAdd) *  \
898                                         (rxd_count[nic->rxd_mode] + 1));
899                                 while (k != rxd_count[nic->rxd_mode]) {
900                                         ba = &mac_control->rings[i].ba[j][k];
901
902                                         ba->ba_0_org = (void *) kmalloc
903                                             (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
904                                         if (!ba->ba_0_org)
905                                                 return -ENOMEM;
906                                         mem_allocated +=
907                                                 (BUF0_LEN + ALIGN_SIZE);
908                                         tmp = (unsigned long)ba->ba_0_org;
909                                         tmp += ALIGN_SIZE;
910                                         tmp &= ~((unsigned long) ALIGN_SIZE);
911                                         ba->ba_0 = (void *) tmp;
912
913                                         ba->ba_1_org = (void *) kmalloc
914                                             (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
915                                         if (!ba->ba_1_org)
916                                                 return -ENOMEM;
917                                         mem_allocated
918                                                 += (BUF1_LEN + ALIGN_SIZE);
919                                         tmp = (unsigned long) ba->ba_1_org;
920                                         tmp += ALIGN_SIZE;
921                                         tmp &= ~((unsigned long) ALIGN_SIZE);
922                                         ba->ba_1 = (void *) tmp;
923                                         k++;
924                                 }
925                         }
926                 }
927         }
928
929         /* Allocation and initialization of Statistics block */
930         size = sizeof(struct stat_block);
931         mac_control->stats_mem = pci_alloc_consistent
932             (nic->pdev, size, &mac_control->stats_mem_phy);
933
934         if (!mac_control->stats_mem) {
935                 /*
936                  * In case of failure, free_shared_mem() is called, which
937                  * should free any memory that was alloced till the
938                  * failure happened.
939                  */
940                 return -ENOMEM;
941         }
942         mem_allocated += size;
943         mac_control->stats_mem_sz = size;
944
945         tmp_v_addr = mac_control->stats_mem;
946         mac_control->stats_info = (struct stat_block *) tmp_v_addr;
947         memset(tmp_v_addr, 0, size);
948         DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
949                   (unsigned long long) tmp_p_addr);
950         mac_control->stats_info->sw_stat.mem_allocated += mem_allocated;
951         return SUCCESS;
952 }
953
954 /**
955  * free_shared_mem - Free the allocated Memory
956  * @nic:  Device private variable.
957  * Description: This function is to free all memory locations allocated by
958  * the init_shared_mem() function and return it to the kernel.
959  */
960
961 static void free_shared_mem(struct s2io_nic *nic)
962 {
963         int i, j, blk_cnt, size;
964         void *tmp_v_addr;
965         dma_addr_t tmp_p_addr;
966         struct mac_info *mac_control;
967         struct config_param *config;
968         int lst_size, lst_per_page;
969         struct net_device *dev;
970         int page_num = 0;
971
972         if (!nic)
973                 return;
974
975         dev = nic->dev;
976
977         mac_control = &nic->mac_control;
978         config = &nic->config;
979
980         lst_size = (sizeof(struct TxD) * config->max_txds);
981         lst_per_page = PAGE_SIZE / lst_size;
982
983         for (i = 0; i < config->tx_fifo_num; i++) {
984                 page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
985                                                         lst_per_page);
986                 for (j = 0; j < page_num; j++) {
987                         int mem_blks = (j * lst_per_page);
988                         if (!mac_control->fifos[i].list_info)
989                                 return;
990                         if (!mac_control->fifos[i].list_info[mem_blks].
991                                  list_virt_addr)
992                                 break;
993                         pci_free_consistent(nic->pdev, PAGE_SIZE,
994                                             mac_control->fifos[i].
995                                             list_info[mem_blks].
996                                             list_virt_addr,
997                                             mac_control->fifos[i].
998                                             list_info[mem_blks].
999                                             list_phy_addr);
1000                         nic->mac_control.stats_info->sw_stat.mem_freed
1001                                                 += PAGE_SIZE;
1002                 }
1003                 /* If we got a zero DMA address during allocation,
1004                  * free the page now
1005                  */
1006                 if (mac_control->zerodma_virt_addr) {
1007                         pci_free_consistent(nic->pdev, PAGE_SIZE,
1008                                             mac_control->zerodma_virt_addr,
1009                                             (dma_addr_t)0);
1010                         DBG_PRINT(INIT_DBG,
1011                                 "%s: Freeing TxDL with zero DMA addr. ",
1012                                 dev->name);
1013                         DBG_PRINT(INIT_DBG, "Virtual address %p\n",
1014                                 mac_control->zerodma_virt_addr);
1015                         nic->mac_control.stats_info->sw_stat.mem_freed
1016                                                 += PAGE_SIZE;
1017                 }
1018                 kfree(mac_control->fifos[i].list_info);
1019                 nic->mac_control.stats_info->sw_stat.mem_freed +=
1020                 (nic->config.tx_cfg[i].fifo_len *sizeof(struct list_info_hold));
1021         }
1022
1023         size = SIZE_OF_BLOCK;
1024         for (i = 0; i < config->rx_ring_num; i++) {
1025                 blk_cnt = mac_control->rings[i].block_count;
1026                 for (j = 0; j < blk_cnt; j++) {
1027                         tmp_v_addr = mac_control->rings[i].rx_blocks[j].
1028                                 block_virt_addr;
1029                         tmp_p_addr = mac_control->rings[i].rx_blocks[j].
1030                                 block_dma_addr;
1031                         if (tmp_v_addr == NULL)
1032                                 break;
1033                         pci_free_consistent(nic->pdev, size,
1034                                             tmp_v_addr, tmp_p_addr);
1035                         nic->mac_control.stats_info->sw_stat.mem_freed += size;
1036                         kfree(mac_control->rings[i].rx_blocks[j].rxds);
1037                         nic->mac_control.stats_info->sw_stat.mem_freed +=
1038                         ( sizeof(struct rxd_info)* rxd_count[nic->rxd_mode]);
1039                 }
1040         }
1041
1042         if (nic->rxd_mode == RXD_MODE_3B) {
1043                 /* Freeing buffer storage addresses in 2BUFF mode. */
1044                 for (i = 0; i < config->rx_ring_num; i++) {
1045                         blk_cnt = config->rx_cfg[i].num_rxd /
1046                             (rxd_count[nic->rxd_mode] + 1);
1047                         for (j = 0; j < blk_cnt; j++) {
1048                                 int k = 0;
1049                                 if (!mac_control->rings[i].ba[j])
1050                                         continue;
1051                                 while (k != rxd_count[nic->rxd_mode]) {
1052                                         struct buffAdd *ba =
1053                                                 &mac_control->rings[i].ba[j][k];
1054                                         kfree(ba->ba_0_org);
1055                                         nic->mac_control.stats_info->sw_stat.\
1056                                         mem_freed += (BUF0_LEN + ALIGN_SIZE);
1057                                         kfree(ba->ba_1_org);
1058                                         nic->mac_control.stats_info->sw_stat.\
1059                                         mem_freed += (BUF1_LEN + ALIGN_SIZE);
1060                                         k++;
1061                                 }
1062                                 kfree(mac_control->rings[i].ba[j]);
1063                                 nic->mac_control.stats_info->sw_stat.mem_freed +=
1064                                         (sizeof(struct buffAdd) *
1065                                         (rxd_count[nic->rxd_mode] + 1));
1066                         }
1067                         kfree(mac_control->rings[i].ba);
1068                         nic->mac_control.stats_info->sw_stat.mem_freed +=
1069                         (sizeof(struct buffAdd *) * blk_cnt);
1070                 }
1071         }
1072
1073         for (i = 0; i < nic->config.tx_fifo_num; i++) {
1074                 if (mac_control->fifos[i].ufo_in_band_v) {
1075                         nic->mac_control.stats_info->sw_stat.mem_freed
1076                                 += (config->tx_cfg[i].fifo_len * sizeof(u64));
1077                         kfree(mac_control->fifos[i].ufo_in_band_v);
1078                 }
1079         }
1080
1081         if (mac_control->stats_mem) {
1082                 nic->mac_control.stats_info->sw_stat.mem_freed +=
1083                         mac_control->stats_mem_sz;
1084                 pci_free_consistent(nic->pdev,
1085                                     mac_control->stats_mem_sz,
1086                                     mac_control->stats_mem,
1087                                     mac_control->stats_mem_phy);
1088         }
1089 }
1090
1091 /**
1092  * s2io_verify_pci_mode -
1093  */
1094
1095 static int s2io_verify_pci_mode(struct s2io_nic *nic)
1096 {
1097         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1098         register u64 val64 = 0;
1099         int     mode;
1100
1101         val64 = readq(&bar0->pci_mode);
1102         mode = (u8)GET_PCI_MODE(val64);
1103
1104         if ( val64 & PCI_MODE_UNKNOWN_MODE)
1105                 return -1;      /* Unknown PCI mode */
1106         return mode;
1107 }
1108
1109 #define NEC_VENID   0x1033
1110 #define NEC_DEVID   0x0125
1111 static int s2io_on_nec_bridge(struct pci_dev *s2io_pdev)
1112 {
1113         struct pci_dev *tdev = NULL;
1114         while ((tdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) {
1115                 if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) {
1116                         if (tdev->bus == s2io_pdev->bus->parent)
1117                                 pci_dev_put(tdev);
1118                                 return 1;
1119                 }
1120         }
1121         return 0;
1122 }
1123
1124 static int bus_speed[8] = {33, 133, 133, 200, 266, 133, 200, 266};
1125 /**
1126  * s2io_print_pci_mode -
1127  */
1128 static int s2io_print_pci_mode(struct s2io_nic *nic)
1129 {
1130         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1131         register u64 val64 = 0;
1132         int     mode;
1133         struct config_param *config = &nic->config;
1134
1135         val64 = readq(&bar0->pci_mode);
1136         mode = (u8)GET_PCI_MODE(val64);
1137
1138         if ( val64 & PCI_MODE_UNKNOWN_MODE)
1139                 return -1;      /* Unknown PCI mode */
1140
1141         config->bus_speed = bus_speed[mode];
1142
1143         if (s2io_on_nec_bridge(nic->pdev)) {
1144                 DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",
1145                                                         nic->dev->name);
1146                 return mode;
1147         }
1148
1149         if (val64 & PCI_MODE_32_BITS) {
1150                 DBG_PRINT(ERR_DBG, "%s: Device is on 32 bit ", nic->dev->name);
1151         } else {
1152                 DBG_PRINT(ERR_DBG, "%s: Device is on 64 bit ", nic->dev->name);
1153         }
1154
1155         switch(mode) {
1156                 case PCI_MODE_PCI_33:
1157                         DBG_PRINT(ERR_DBG, "33MHz PCI bus\n");
1158                         break;
1159                 case PCI_MODE_PCI_66:
1160                         DBG_PRINT(ERR_DBG, "66MHz PCI bus\n");
1161                         break;
1162                 case PCI_MODE_PCIX_M1_66:
1163                         DBG_PRINT(ERR_DBG, "66MHz PCIX(M1) bus\n");
1164                         break;
1165                 case PCI_MODE_PCIX_M1_100:
1166                         DBG_PRINT(ERR_DBG, "100MHz PCIX(M1) bus\n");
1167                         break;
1168                 case PCI_MODE_PCIX_M1_133:
1169                         DBG_PRINT(ERR_DBG, "133MHz PCIX(M1) bus\n");
1170                         break;
1171                 case PCI_MODE_PCIX_M2_66:
1172                         DBG_PRINT(ERR_DBG, "133MHz PCIX(M2) bus\n");
1173                         break;
1174                 case PCI_MODE_PCIX_M2_100:
1175                         DBG_PRINT(ERR_DBG, "200MHz PCIX(M2) bus\n");
1176                         break;
1177                 case PCI_MODE_PCIX_M2_133:
1178                         DBG_PRINT(ERR_DBG, "266MHz PCIX(M2) bus\n");
1179                         break;
1180                 default:
1181                         return -1;      /* Unsupported bus speed */
1182         }
1183
1184         return mode;
1185 }
1186
1187 /**
1188  *  init_tti - Initialization transmit traffic interrupt scheme
1189  *  @nic: device private variable
1190  *  @link: link status (UP/DOWN) used to enable/disable continuous
1191  *  transmit interrupts
1192  *  Description: The function configures transmit traffic interrupts
1193  *  Return Value:  SUCCESS on success and
1194  *  '-1' on failure
1195  */
1196
1197 static int init_tti(struct s2io_nic *nic, int link)
1198 {
1199         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1200         register u64 val64 = 0;
1201         int i;
1202         struct config_param *config;
1203
1204         config = &nic->config;
1205
1206         for (i = 0; i < config->tx_fifo_num; i++) {
1207                 /*
1208                  * TTI Initialization. Default Tx timer gets us about
1209                  * 250 interrupts per sec. Continuous interrupts are enabled
1210                  * by default.
1211                  */
1212                 if (nic->device_type == XFRAME_II_DEVICE) {
1213                         int count = (nic->config.bus_speed * 125)/2;
1214                         val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
1215                 } else
1216                         val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
1217
1218                 val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
1219                                 TTI_DATA1_MEM_TX_URNG_B(0x10) |
1220                                 TTI_DATA1_MEM_TX_URNG_C(0x30) |
1221                                 TTI_DATA1_MEM_TX_TIMER_AC_EN;
1222
1223                 if (use_continuous_tx_intrs && (link == LINK_UP))
1224                         val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
1225                 writeq(val64, &bar0->tti_data1_mem);
1226
1227                 val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
1228                                 TTI_DATA2_MEM_TX_UFC_B(0x20) |
1229                                 TTI_DATA2_MEM_TX_UFC_C(0x40) |
1230                                 TTI_DATA2_MEM_TX_UFC_D(0x80);
1231
1232                 writeq(val64, &bar0->tti_data2_mem);
1233
1234                 val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD |
1235                                 TTI_CMD_MEM_OFFSET(i);
1236                 writeq(val64, &bar0->tti_command_mem);
1237
1238                 if (wait_for_cmd_complete(&bar0->tti_command_mem,
1239                         TTI_CMD_MEM_STROBE_NEW_CMD, S2IO_BIT_RESET) != SUCCESS)
1240                         return FAILURE;
1241         }
1242
1243         return SUCCESS;
1244 }
1245
1246 /**
1247  *  init_nic - Initialization of hardware
1248  *  @nic: device private variable
1249  *  Description: The function sequentially configures every block
1250  *  of the H/W from their reset values.
1251  *  Return Value:  SUCCESS on success and
1252  *  '-1' on failure (endian settings incorrect).
1253  */
1254
1255 static int init_nic(struct s2io_nic *nic)
1256 {
1257         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1258         struct net_device *dev = nic->dev;
1259         register u64 val64 = 0;
1260         void __iomem *add;
1261         u32 time;
1262         int i, j;
1263         struct mac_info *mac_control;
1264         struct config_param *config;
1265         int dtx_cnt = 0;
1266         unsigned long long mem_share;
1267         int mem_size;
1268
1269         mac_control = &nic->mac_control;
1270         config = &nic->config;
1271
1272         /* to set the swapper controle on the card */
1273         if(s2io_set_swapper(nic)) {
1274                 DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n");
1275                 return -EIO;
1276         }
1277
1278         /*
1279          * Herc requires EOI to be removed from reset before XGXS, so..
1280          */
1281         if (nic->device_type & XFRAME_II_DEVICE) {
1282                 val64 = 0xA500000000ULL;
1283                 writeq(val64, &bar0->sw_reset);
1284                 msleep(500);
1285                 val64 = readq(&bar0->sw_reset);
1286         }
1287
1288         /* Remove XGXS from reset state */
1289         val64 = 0;
1290         writeq(val64, &bar0->sw_reset);
1291         msleep(500);
1292         val64 = readq(&bar0->sw_reset);
1293
1294         /* Ensure that it's safe to access registers by checking
1295          * RIC_RUNNING bit is reset. Check is valid only for XframeII.
1296          */
1297         if (nic->device_type == XFRAME_II_DEVICE) {
1298                 for (i = 0; i < 50; i++) {
1299                         val64 = readq(&bar0->adapter_status);
1300                         if (!(val64 & ADAPTER_STATUS_RIC_RUNNING))
1301                                 break;
1302                         msleep(10);
1303                 }
1304                 if (i == 50)
1305                         return -ENODEV;
1306         }
1307
1308         /*  Enable Receiving broadcasts */
1309         add = &bar0->mac_cfg;
1310         val64 = readq(&bar0->mac_cfg);
1311         val64 |= MAC_RMAC_BCAST_ENABLE;
1312         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1313         writel((u32) val64, add);
1314         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1315         writel((u32) (val64 >> 32), (add + 4));
1316
1317         /* Read registers in all blocks */
1318         val64 = readq(&bar0->mac_int_mask);
1319         val64 = readq(&bar0->mc_int_mask);
1320         val64 = readq(&bar0->xgxs_int_mask);
1321
1322         /*  Set MTU */
1323         val64 = dev->mtu;
1324         writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
1325
1326         if (nic->device_type & XFRAME_II_DEVICE) {
1327                 while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) {
1328                         SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt],
1329                                           &bar0->dtx_control, UF);
1330                         if (dtx_cnt & 0x1)
1331                                 msleep(1); /* Necessary!! */
1332                         dtx_cnt++;
1333                 }
1334         } else {
1335                 while (xena_dtx_cfg[dtx_cnt] != END_SIGN) {
1336                         SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt],
1337                                           &bar0->dtx_control, UF);
1338                         val64 = readq(&bar0->dtx_control);
1339                         dtx_cnt++;
1340                 }
1341         }
1342
1343         /*  Tx DMA Initialization */
1344         val64 = 0;
1345         writeq(val64, &bar0->tx_fifo_partition_0);
1346         writeq(val64, &bar0->tx_fifo_partition_1);
1347         writeq(val64, &bar0->tx_fifo_partition_2);
1348         writeq(val64, &bar0->tx_fifo_partition_3);
1349
1350
1351         for (i = 0, j = 0; i < config->tx_fifo_num; i++) {
1352                 val64 |=
1353                     vBIT(config->tx_cfg[i].fifo_len - 1, ((j * 32) + 19),
1354                          13) | vBIT(config->tx_cfg[i].fifo_priority,
1355                                     ((j * 32) + 5), 3);
1356
1357                 if (i == (config->tx_fifo_num - 1)) {
1358                         if (i % 2 == 0)
1359                                 i++;
1360                 }
1361
1362                 switch (i) {
1363                 case 1:
1364                         writeq(val64, &bar0->tx_fifo_partition_0);
1365                         val64 = 0;
1366                         j = 0;
1367                         break;
1368                 case 3:
1369                         writeq(val64, &bar0->tx_fifo_partition_1);
1370                         val64 = 0;
1371                         j = 0;
1372                         break;
1373                 case 5:
1374                         writeq(val64, &bar0->tx_fifo_partition_2);
1375                         val64 = 0;
1376                         j = 0;
1377                         break;
1378                 case 7:
1379                         writeq(val64, &bar0->tx_fifo_partition_3);
1380                         val64 = 0;
1381                         j = 0;
1382                         break;
1383                 default:
1384                         j++;
1385                         break;
1386                 }
1387         }
1388
1389         /*
1390          * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
1391          * SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
1392          */
1393         if ((nic->device_type == XFRAME_I_DEVICE) &&
1394                 (nic->pdev->revision < 4))
1395                 writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
1396
1397         val64 = readq(&bar0->tx_fifo_partition_0);
1398         DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
1399                   &bar0->tx_fifo_partition_0, (unsigned long long) val64);
1400
1401         /*
1402          * Initialization of Tx_PA_CONFIG register to ignore packet
1403          * integrity checking.
1404          */
1405         val64 = readq(&bar0->tx_pa_cfg);
1406         val64 |= TX_PA_CFG_IGNORE_FRM_ERR | TX_PA_CFG_IGNORE_SNAP_OUI |
1407             TX_PA_CFG_IGNORE_LLC_CTRL | TX_PA_CFG_IGNORE_L2_ERR;
1408         writeq(val64, &bar0->tx_pa_cfg);
1409
1410         /* Rx DMA intialization. */
1411         val64 = 0;
1412         for (i = 0; i < config->rx_ring_num; i++) {
1413                 val64 |=
1414                     vBIT(config->rx_cfg[i].ring_priority, (5 + (i * 8)),
1415                          3);
1416         }
1417         writeq(val64, &bar0->rx_queue_priority);
1418
1419         /*
1420          * Allocating equal share of memory to all the
1421          * configured Rings.
1422          */
1423         val64 = 0;
1424         if (nic->device_type & XFRAME_II_DEVICE)
1425                 mem_size = 32;
1426         else
1427                 mem_size = 64;
1428
1429         for (i = 0; i < config->rx_ring_num; i++) {
1430                 switch (i) {
1431                 case 0:
1432                         mem_share = (mem_size / config->rx_ring_num +
1433                                      mem_size % config->rx_ring_num);
1434                         val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share);
1435                         continue;
1436                 case 1:
1437                         mem_share = (mem_size / config->rx_ring_num);
1438                         val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share);
1439                         continue;
1440                 case 2:
1441                         mem_share = (mem_size / config->rx_ring_num);
1442                         val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share);
1443                         continue;
1444                 case 3:
1445                         mem_share = (mem_size / config->rx_ring_num);
1446                         val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share);
1447                         continue;
1448                 case 4:
1449                         mem_share = (mem_size / config->rx_ring_num);
1450                         val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share);
1451                         continue;
1452                 case 5:
1453                         mem_share = (mem_size / config->rx_ring_num);
1454                         val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share);
1455                         continue;
1456                 case 6:
1457                         mem_share = (mem_size / config->rx_ring_num);
1458                         val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share);
1459                         continue;
1460                 case 7:
1461                         mem_share = (mem_size / config->rx_ring_num);
1462                         val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share);
1463                         continue;
1464                 }
1465         }
1466         writeq(val64, &bar0->rx_queue_cfg);
1467
1468         /*
1469          * Filling Tx round robin registers
1470          * as per the number of FIFOs for equal scheduling priority
1471          */
1472         switch (config->tx_fifo_num) {
1473         case 1:
1474                 val64 = 0x0;
1475                 writeq(val64, &bar0->tx_w_round_robin_0);
1476                 writeq(val64, &bar0->tx_w_round_robin_1);
1477                 writeq(val64, &bar0->tx_w_round_robin_2);
1478                 writeq(val64, &bar0->tx_w_round_robin_3);
1479                 writeq(val64, &bar0->tx_w_round_robin_4);
1480                 break;
1481         case 2:
1482                 val64 = 0x0001000100010001ULL;
1483                 writeq(val64, &bar0->tx_w_round_robin_0);
1484                 writeq(val64, &bar0->tx_w_round_robin_1);
1485                 writeq(val64, &bar0->tx_w_round_robin_2);
1486                 writeq(val64, &bar0->tx_w_round_robin_3);
1487                 val64 = 0x0001000100000000ULL;
1488                 writeq(val64, &bar0->tx_w_round_robin_4);
1489                 break;
1490         case 3:
1491                 val64 = 0x0001020001020001ULL;
1492                 writeq(val64, &bar0->tx_w_round_robin_0);
1493                 val64 = 0x0200010200010200ULL;
1494                 writeq(val64, &bar0->tx_w_round_robin_1);
1495                 val64 = 0x0102000102000102ULL;
1496                 writeq(val64, &bar0->tx_w_round_robin_2);
1497                 val64 = 0x0001020001020001ULL;
1498                 writeq(val64, &bar0->tx_w_round_robin_3);
1499                 val64 = 0x0200010200000000ULL;
1500                 writeq(val64, &bar0->tx_w_round_robin_4);
1501                 break;
1502         case 4:
1503                 val64 = 0x0001020300010203ULL;
1504                 writeq(val64, &bar0->tx_w_round_robin_0);
1505                 writeq(val64, &bar0->tx_w_round_robin_1);
1506                 writeq(val64, &bar0->tx_w_round_robin_2);
1507                 writeq(val64, &bar0->tx_w_round_robin_3);
1508                 val64 = 0x0001020300000000ULL;
1509                 writeq(val64, &bar0->tx_w_round_robin_4);
1510                 break;
1511         case 5:
1512                 val64 = 0x0001020304000102ULL;
1513                 writeq(val64, &bar0->tx_w_round_robin_0);
1514                 val64 = 0x0304000102030400ULL;
1515                 writeq(val64, &bar0->tx_w_round_robin_1);
1516                 val64 = 0x0102030400010203ULL;
1517                 writeq(val64, &bar0->tx_w_round_robin_2);
1518                 val64 = 0x0400010203040001ULL;
1519                 writeq(val64, &bar0->tx_w_round_robin_3);
1520                 val64 = 0x0203040000000000ULL;
1521                 writeq(val64, &bar0->tx_w_round_robin_4);
1522                 break;
1523         case 6:
1524                 val64 = 0x0001020304050001ULL;
1525                 writeq(val64, &bar0->tx_w_round_robin_0);
1526                 val64 = 0x0203040500010203ULL;
1527                 writeq(val64, &bar0->tx_w_round_robin_1);
1528                 val64 = 0x0405000102030405ULL;
1529                 writeq(val64, &bar0->tx_w_round_robin_2);
1530                 val64 = 0x0001020304050001ULL;
1531                 writeq(val64, &bar0->tx_w_round_robin_3);
1532                 val64 = 0x0203040500000000ULL;
1533                 writeq(val64, &bar0->tx_w_round_robin_4);
1534                 break;
1535         case 7:
1536                 val64 = 0x0001020304050600ULL;
1537                 writeq(val64, &bar0->tx_w_round_robin_0);
1538                 val64 = 0x0102030405060001ULL;
1539                 writeq(val64, &bar0->tx_w_round_robin_1);
1540                 val64 = 0x0203040506000102ULL;
1541                 writeq(val64, &bar0->tx_w_round_robin_2);
1542                 val64 = 0x0304050600010203ULL;
1543                 writeq(val64, &bar0->tx_w_round_robin_3);
1544                 val64 = 0x0405060000000000ULL;
1545                 writeq(val64, &bar0->tx_w_round_robin_4);
1546                 break;
1547         case 8:
1548                 val64 = 0x0001020304050607ULL;
1549                 writeq(val64, &bar0->tx_w_round_robin_0);
1550                 writeq(val64, &bar0->tx_w_round_robin_1);
1551                 writeq(val64, &bar0->tx_w_round_robin_2);
1552                 writeq(val64, &bar0->tx_w_round_robin_3);
1553                 val64 = 0x0001020300000000ULL;
1554                 writeq(val64, &bar0->tx_w_round_robin_4);
1555                 break;
1556         }
1557
1558         /* Enable all configured Tx FIFO partitions */
1559         val64 = readq(&bar0->tx_fifo_partition_0);
1560         val64 |= (TX_FIFO_PARTITION_EN);
1561         writeq(val64, &bar0->tx_fifo_partition_0);
1562
1563         /* Filling the Rx round robin registers as per the
1564          * number of Rings and steering based on QoS with
1565          * equal priority.
1566          */
1567         switch (config->rx_ring_num) {
1568         case 1:
1569                 val64 = 0x0;
1570                 writeq(val64, &bar0->rx_w_round_robin_0);
1571                 writeq(val64, &bar0->rx_w_round_robin_1);
1572                 writeq(val64, &bar0->rx_w_round_robin_2);
1573                 writeq(val64, &bar0->rx_w_round_robin_3);
1574                 writeq(val64, &bar0->rx_w_round_robin_4);
1575
1576                 val64 = 0x8080808080808080ULL;
1577                 writeq(val64, &bar0->rts_qos_steering);
1578                 break;
1579         case 2:
1580                 val64 = 0x0001000100010001ULL;
1581                 writeq(val64, &bar0->rx_w_round_robin_0);
1582                 writeq(val64, &bar0->rx_w_round_robin_1);
1583                 writeq(val64, &bar0->rx_w_round_robin_2);
1584                 writeq(val64, &bar0->rx_w_round_robin_3);
1585                 val64 = 0x0001000100000000ULL;
1586                 writeq(val64, &bar0->rx_w_round_robin_4);
1587
1588                 val64 = 0x8080808040404040ULL;
1589                 writeq(val64, &bar0->rts_qos_steering);
1590                 break;
1591         case 3:
1592                 val64 = 0x0001020001020001ULL;
1593                 writeq(val64, &bar0->rx_w_round_robin_0);
1594                 val64 = 0x0200010200010200ULL;
1595                 writeq(val64, &bar0->rx_w_round_robin_1);
1596                 val64 = 0x0102000102000102ULL;
1597                 writeq(val64, &bar0->rx_w_round_robin_2);
1598                 val64 = 0x0001020001020001ULL;
1599                 writeq(val64, &bar0->rx_w_round_robin_3);
1600                 val64 = 0x0200010200000000ULL;
1601                 writeq(val64, &bar0->rx_w_round_robin_4);
1602
1603                 val64 = 0x8080804040402020ULL;
1604                 writeq(val64, &bar0->rts_qos_steering);
1605                 break;
1606         case 4:
1607                 val64 = 0x0001020300010203ULL;
1608                 writeq(val64, &bar0->rx_w_round_robin_0);
1609                 writeq(val64, &bar0->rx_w_round_robin_1);
1610                 writeq(val64, &bar0->rx_w_round_robin_2);
1611                 writeq(val64, &bar0->rx_w_round_robin_3);
1612                 val64 = 0x0001020300000000ULL;
1613                 writeq(val64, &bar0->rx_w_round_robin_4);
1614
1615                 val64 = 0x8080404020201010ULL;
1616                 writeq(val64, &bar0->rts_qos_steering);
1617                 break;
1618         case 5:
1619                 val64 = 0x0001020304000102ULL;
1620                 writeq(val64, &bar0->rx_w_round_robin_0);
1621                 val64 = 0x0304000102030400ULL;
1622                 writeq(val64, &bar0->rx_w_round_robin_1);
1623                 val64 = 0x0102030400010203ULL;
1624                 writeq(val64, &bar0->rx_w_round_robin_2);
1625                 val64 = 0x0400010203040001ULL;
1626                 writeq(val64, &bar0->rx_w_round_robin_3);
1627                 val64 = 0x0203040000000000ULL;
1628                 writeq(val64, &bar0->rx_w_round_robin_4);
1629
1630                 val64 = 0x8080404020201008ULL;
1631                 writeq(val64, &bar0->rts_qos_steering);
1632                 break;
1633         case 6:
1634                 val64 = 0x0001020304050001ULL;
1635                 writeq(val64, &bar0->rx_w_round_robin_0);
1636                 val64 = 0x0203040500010203ULL;
1637                 writeq(val64, &bar0->rx_w_round_robin_1);
1638                 val64 = 0x0405000102030405ULL;
1639                 writeq(val64, &bar0->rx_w_round_robin_2);
1640                 val64 = 0x0001020304050001ULL;
1641                 writeq(val64, &bar0->rx_w_round_robin_3);
1642                 val64 = 0x0203040500000000ULL;
1643                 writeq(val64, &bar0->rx_w_round_robin_4);
1644
1645                 val64 = 0x8080404020100804ULL;
1646                 writeq(val64, &bar0->rts_qos_steering);
1647                 break;
1648         case 7:
1649                 val64 = 0x0001020304050600ULL;
1650                 writeq(val64, &bar0->rx_w_round_robin_0);
1651                 val64 = 0x0102030405060001ULL;
1652                 writeq(val64, &bar0->rx_w_round_robin_1);
1653                 val64 = 0x0203040506000102ULL;
1654                 writeq(val64, &bar0->rx_w_round_robin_2);
1655                 val64 = 0x0304050600010203ULL;
1656                 writeq(val64, &bar0->rx_w_round_robin_3);
1657                 val64 = 0x0405060000000000ULL;
1658                 writeq(val64, &bar0->rx_w_round_robin_4);
1659
1660                 val64 = 0x8080402010080402ULL;
1661                 writeq(val64, &bar0->rts_qos_steering);
1662                 break;
1663         case 8:
1664                 val64 = 0x0001020304050607ULL;
1665                 writeq(val64, &bar0->rx_w_round_robin_0);
1666                 writeq(val64, &bar0->rx_w_round_robin_1);
1667                 writeq(val64, &bar0->rx_w_round_robin_2);
1668                 writeq(val64, &bar0->rx_w_round_robin_3);
1669                 val64 = 0x0001020300000000ULL;
1670                 writeq(val64, &bar0->rx_w_round_robin_4);
1671
1672                 val64 = 0x8040201008040201ULL;
1673                 writeq(val64, &bar0->rts_qos_steering);
1674                 break;
1675         }
1676
1677         /* UDP Fix */
1678         val64 = 0;
1679         for (i = 0; i < 8; i++)
1680                 writeq(val64, &bar0->rts_frm_len_n[i]);
1681
1682         /* Set the default rts frame length for the rings configured */
1683         val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22);
1684         for (i = 0 ; i < config->rx_ring_num ; i++)
1685                 writeq(val64, &bar0->rts_frm_len_n[i]);
1686
1687         /* Set the frame length for the configured rings
1688          * desired by the user
1689          */
1690         for (i = 0; i < config->rx_ring_num; i++) {
1691                 /* If rts_frm_len[i] == 0 then it is assumed that user not
1692                  * specified frame length steering.
1693                  * If the user provides the frame length then program
1694                  * the rts_frm_len register for those values or else
1695                  * leave it as it is.
1696                  */
1697                 if (rts_frm_len[i] != 0) {
1698                         writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]),
1699                                 &bar0->rts_frm_len_n[i]);
1700                 }
1701         }
1702
1703         /* Disable differentiated services steering logic */
1704         for (i = 0; i < 64; i++) {
1705                 if (rts_ds_steer(nic, i, 0) == FAILURE) {
1706                         DBG_PRINT(ERR_DBG, "%s: failed rts ds steering",
1707                                 dev->name);
1708                         DBG_PRINT(ERR_DBG, "set on codepoint %d\n", i);
1709                         return -ENODEV;
1710                 }
1711         }
1712
1713         /* Program statistics memory */
1714         writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
1715
1716         if (nic->device_type == XFRAME_II_DEVICE) {
1717                 val64 = STAT_BC(0x320);
1718                 writeq(val64, &bar0->stat_byte_cnt);
1719         }
1720
1721         /*
1722          * Initializing the sampling rate for the device to calculate the
1723          * bandwidth utilization.
1724          */
1725         val64 = MAC_TX_LINK_UTIL_VAL(tmac_util_period) |
1726             MAC_RX_LINK_UTIL_VAL(rmac_util_period);
1727         writeq(val64, &bar0->mac_link_util);
1728
1729         /*
1730          * Initializing the Transmit and Receive Traffic Interrupt
1731          * Scheme.
1732          */
1733
1734         /* Initialize TTI */
1735         if (SUCCESS != init_tti(nic, nic->last_link_state))
1736                 return -ENODEV;
1737
1738         /* RTI Initialization */
1739         if (nic->device_type == XFRAME_II_DEVICE) {
1740                 /*
1741                  * Programmed to generate Apprx 500 Intrs per
1742                  * second
1743                  */
1744                 int count = (nic->config.bus_speed * 125)/4;
1745                 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count);
1746         } else
1747                 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
1748         val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) |
1749                  RTI_DATA1_MEM_RX_URNG_B(0x10) |
1750                  RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
1751
1752         writeq(val64, &bar0->rti_data1_mem);
1753
1754         val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
1755                 RTI_DATA2_MEM_RX_UFC_B(0x2) ;
1756         if (nic->config.intr_type == MSI_X)
1757             val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | \
1758                         RTI_DATA2_MEM_RX_UFC_D(0x40));
1759         else
1760             val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) | \
1761                         RTI_DATA2_MEM_RX_UFC_D(0x80));
1762         writeq(val64, &bar0->rti_data2_mem);
1763
1764         for (i = 0; i < config->rx_ring_num; i++) {
1765                 val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD
1766                                 | RTI_CMD_MEM_OFFSET(i);
1767                 writeq(val64, &bar0->rti_command_mem);
1768
1769                 /*
1770                  * Once the operation completes, the Strobe bit of the
1771                  * command register will be reset. We poll for this
1772                  * particular condition. We wait for a maximum of 500ms
1773                  * for the operation to complete, if it's not complete
1774                  * by then we return error.
1775                  */
1776                 time = 0;
1777                 while (TRUE) {
1778                         val64 = readq(&bar0->rti_command_mem);
1779                         if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD))
1780                                 break;
1781
1782                         if (time > 10) {
1783                                 DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
1784                                           dev->name);
1785                                 return -ENODEV;
1786                         }
1787                         time++;
1788                         msleep(50);
1789                 }
1790         }
1791
1792         /*
1793          * Initializing proper values as Pause threshold into all
1794          * the 8 Queues on Rx side.
1795          */
1796         writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3);
1797         writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
1798
1799         /* Disable RMAC PAD STRIPPING */
1800         add = &bar0->mac_cfg;
1801         val64 = readq(&bar0->mac_cfg);
1802         val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
1803         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1804         writel((u32) (val64), add);
1805         writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1806         writel((u32) (val64 >> 32), (add + 4));
1807         val64 = readq(&bar0->mac_cfg);
1808
1809         /* Enable FCS stripping by adapter */
1810         add = &bar0->mac_cfg;
1811         val64 = readq(&bar0->mac_cfg);
1812         val64 |= MAC_CFG_RMAC_STRIP_FCS;
1813         if (nic->device_type == XFRAME_II_DEVICE)
1814                 writeq(val64, &bar0->mac_cfg);
1815         else {
1816                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1817                 writel((u32) (val64), add);
1818                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1819                 writel((u32) (val64 >> 32), (add + 4));
1820         }
1821
1822         /*
1823          * Set the time value to be inserted in the pause frame
1824          * generated by xena.
1825          */
1826         val64 = readq(&bar0->rmac_pause_cfg);
1827         val64 &= ~(RMAC_PAUSE_HG_PTIME(0xffff));
1828         val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time);
1829         writeq(val64, &bar0->rmac_pause_cfg);
1830
1831         /*
1832          * Set the Threshold Limit for Generating the pause frame
1833          * If the amount of data in any Queue exceeds ratio of
1834          * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
1835          * pause frame is generated
1836          */
1837         val64 = 0;
1838         for (i = 0; i < 4; i++) {
1839                 val64 |=
1840                     (((u64) 0xFF00 | nic->mac_control.
1841                       mc_pause_threshold_q0q3)
1842                      << (i * 2 * 8));
1843         }
1844         writeq(val64, &bar0->mc_pause_thresh_q0q3);
1845
1846         val64 = 0;
1847         for (i = 0; i < 4; i++) {
1848                 val64 |=
1849                     (((u64) 0xFF00 | nic->mac_control.
1850                       mc_pause_threshold_q4q7)
1851                      << (i * 2 * 8));
1852         }
1853         writeq(val64, &bar0->mc_pause_thresh_q4q7);
1854
1855         /*
1856          * TxDMA will stop Read request if the number of read split has
1857          * exceeded the limit pointed by shared_splits
1858          */
1859         val64 = readq(&bar0->pic_control);
1860         val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits);
1861         writeq(val64, &bar0->pic_control);
1862
1863         if (nic->config.bus_speed == 266) {
1864                 writeq(TXREQTO_VAL(0x7f) | TXREQTO_EN, &bar0->txreqtimeout);
1865                 writeq(0x0, &bar0->read_retry_delay);
1866                 writeq(0x0, &bar0->write_retry_delay);
1867         }
1868
1869         /*
1870          * Programming the Herc to split every write transaction
1871          * that does not start on an ADB to reduce disconnects.
1872          */
1873         if (nic->device_type == XFRAME_II_DEVICE) {
1874                 val64 = FAULT_BEHAVIOUR | EXT_REQ_EN |
1875                         MISC_LINK_STABILITY_PRD(3);
1876                 writeq(val64, &bar0->misc_control);
1877                 val64 = readq(&bar0->pic_control2);
1878                 val64 &= ~(s2BIT(13)|s2BIT(14)|s2BIT(15));
1879                 writeq(val64, &bar0->pic_control2);
1880         }
1881         if (strstr(nic->product_name, "CX4")) {
1882                 val64 = TMAC_AVG_IPG(0x17);
1883                 writeq(val64, &bar0->tmac_avg_ipg);
1884         }
1885
1886         return SUCCESS;
1887 }
1888 #define LINK_UP_DOWN_INTERRUPT          1
1889 #define MAC_RMAC_ERR_TIMER              2
1890
1891 static int s2io_link_fault_indication(struct s2io_nic *nic)
1892 {
1893         if (nic->config.intr_type != INTA)
1894                 return MAC_RMAC_ERR_TIMER;
1895         if (nic->device_type == XFRAME_II_DEVICE)
1896                 return LINK_UP_DOWN_INTERRUPT;
1897         else
1898                 return MAC_RMAC_ERR_TIMER;
1899 }
1900
1901 /**
1902  *  do_s2io_write_bits -  update alarm bits in alarm register
1903  *  @value: alarm bits
1904  *  @flag: interrupt status
1905  *  @addr: address value
1906  *  Description: update alarm bits in alarm register
1907  *  Return Value:
1908  *  NONE.
1909  */
1910 static void do_s2io_write_bits(u64 value, int flag, void __iomem *addr)
1911 {
1912         u64 temp64;
1913
1914         temp64 = readq(addr);
1915
1916         if(flag == ENABLE_INTRS)
1917                 temp64 &= ~((u64) value);
1918         else
1919                 temp64 |= ((u64) value);
1920         writeq(temp64, addr);
1921 }
1922
1923 static void en_dis_err_alarms(struct s2io_nic *nic, u16 mask, int flag)
1924 {
1925         struct XENA_dev_config __iomem *bar0 = nic->bar0;
1926         register u64 gen_int_mask = 0;
1927
1928         if (mask & TX_DMA_INTR) {
1929
1930                 gen_int_mask |= TXDMA_INT_M;
1931
1932                 do_s2io_write_bits(TXDMA_TDA_INT | TXDMA_PFC_INT |
1933                                 TXDMA_PCC_INT | TXDMA_TTI_INT |
1934                                 TXDMA_LSO_INT | TXDMA_TPA_INT |
1935                                 TXDMA_SM_INT, flag, &bar0->txdma_int_mask);
1936
1937                 do_s2io_write_bits(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM |
1938                                 PFC_MISC_0_ERR | PFC_MISC_1_ERR |
1939                                 PFC_PCIX_ERR | PFC_ECC_SG_ERR, flag,
1940                                 &bar0->pfc_err_mask);
1941
1942                 do_s2io_write_bits(TDA_Fn_ECC_DB_ERR | TDA_SM0_ERR_ALARM |
1943                                 TDA_SM1_ERR_ALARM | TDA_Fn_ECC_SG_ERR |
1944                                 TDA_PCIX_ERR, flag, &bar0->tda_err_mask);
1945
1946                 do_s2io_write_bits(PCC_FB_ECC_DB_ERR | PCC_TXB_ECC_DB_ERR |
1947                                 PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM |
1948                                 PCC_N_SERR | PCC_6_COF_OV_ERR |
1949                                 PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR |
1950                                 PCC_7_LSO_OV_ERR | PCC_FB_ECC_SG_ERR |
1951                                 PCC_TXB_ECC_SG_ERR, flag, &bar0->pcc_err_mask);
1952
1953                 do_s2io_write_bits(TTI_SM_ERR_ALARM | TTI_ECC_SG_ERR |
1954                                 TTI_ECC_DB_ERR, flag, &bar0->tti_err_mask);
1955
1956                 do_s2io_write_bits(LSO6_ABORT | LSO7_ABORT |
1957                                 LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM |
1958                                 LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
1959                                 flag, &bar0->lso_err_mask);
1960
1961                 do_s2io_write_bits(TPA_SM_ERR_ALARM | TPA_TX_FRM_DROP,
1962                                 flag, &bar0->tpa_err_mask);
1963
1964                 do_s2io_write_bits(SM_SM_ERR_ALARM, flag, &bar0->sm_err_mask);
1965
1966         }
1967
1968         if (mask & TX_MAC_INTR) {
1969                 gen_int_mask |= TXMAC_INT_M;
1970                 do_s2io_write_bits(MAC_INT_STATUS_TMAC_INT, flag,
1971                                 &bar0->mac_int_mask);
1972                 do_s2io_write_bits(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR |
1973                                 TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR |
1974                                 TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR,
1975                                 flag, &bar0->mac_tmac_err_mask);
1976         }
1977
1978         if (mask & TX_XGXS_INTR) {
1979                 gen_int_mask |= TXXGXS_INT_M;
1980                 do_s2io_write_bits(XGXS_INT_STATUS_TXGXS, flag,
1981                                 &bar0->xgxs_int_mask);
1982                 do_s2io_write_bits(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR |
1983                                 TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
1984                                 flag, &bar0->xgxs_txgxs_err_mask);
1985         }
1986
1987         if (mask & RX_DMA_INTR) {
1988                 gen_int_mask |= RXDMA_INT_M;
1989                 do_s2io_write_bits(RXDMA_INT_RC_INT_M | RXDMA_INT_RPA_INT_M |
1990                                 RXDMA_INT_RDA_INT_M | RXDMA_INT_RTI_INT_M,
1991                                 flag, &bar0->rxdma_int_mask);
1992                 do_s2io_write_bits(RC_PRCn_ECC_DB_ERR | RC_FTC_ECC_DB_ERR |
1993                                 RC_PRCn_SM_ERR_ALARM | RC_FTC_SM_ERR_ALARM |
1994                                 RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR |
1995                                 RC_RDA_FAIL_WR_Rn, flag, &bar0->rc_err_mask);
1996                 do_s2io_write_bits(PRC_PCI_AB_RD_Rn | PRC_PCI_AB_WR_Rn |
1997                                 PRC_PCI_AB_F_WR_Rn | PRC_PCI_DP_RD_Rn |
1998                                 PRC_PCI_DP_WR_Rn | PRC_PCI_DP_F_WR_Rn, flag,
1999                                 &bar0->prc_pcix_err_mask);
2000                 do_s2io_write_bits(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR |
2001                                 RPA_ECC_SG_ERR | RPA_ECC_DB_ERR, flag,
2002                                 &bar0->rpa_err_mask);
2003                 do_s2io_write_bits(RDA_RXDn_ECC_DB_ERR | RDA_FRM_ECC_DB_N_AERR |
2004                                 RDA_SM1_ERR_ALARM | RDA_SM0_ERR_ALARM |
2005                                 RDA_RXD_ECC_DB_SERR | RDA_RXDn_ECC_SG_ERR |
2006                                 RDA_FRM_ECC_SG_ERR | RDA_MISC_ERR|RDA_PCIX_ERR,
2007                                 flag, &bar0->rda_err_mask);
2008                 do_s2io_write_bits(RTI_SM_ERR_ALARM |
2009                                 RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
2010                                 flag, &bar0->rti_err_mask);
2011         }
2012
2013         if (mask & RX_MAC_INTR) {
2014                 gen_int_mask |= RXMAC_INT_M;
2015                 do_s2io_write_bits(MAC_INT_STATUS_RMAC_INT, flag,
2016                                 &bar0->mac_int_mask);
2017                 do_s2io_write_bits(RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR |
2018                                 RMAC_UNUSED_INT | RMAC_SINGLE_ECC_ERR |
2019                                 RMAC_DOUBLE_ECC_ERR |
2020                                 RMAC_LINK_STATE_CHANGE_INT,
2021                                 flag, &bar0->mac_rmac_err_mask);
2022         }
2023
2024         if (mask & RX_XGXS_INTR)
2025         {
2026                 gen_int_mask |= RXXGXS_INT_M;
2027                 do_s2io_write_bits(XGXS_INT_STATUS_RXGXS, flag,
2028                                 &bar0->xgxs_int_mask);
2029                 do_s2io_write_bits(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR, flag,
2030                                 &bar0->xgxs_rxgxs_err_mask);
2031         }
2032
2033         if (mask & MC_INTR) {
2034                 gen_int_mask |= MC_INT_M;
2035                 do_s2io_write_bits(MC_INT_MASK_MC_INT, flag, &bar0->mc_int_mask);
2036                 do_s2io_write_bits(MC_ERR_REG_SM_ERR | MC_ERR_REG_ECC_ALL_SNG |
2037                                 MC_ERR_REG_ECC_ALL_DBL | PLL_LOCK_N, flag,
2038                                 &bar0->mc_err_mask);
2039         }
2040         nic->general_int_mask = gen_int_mask;
2041
2042         /* Remove this line when alarm interrupts are enabled */
2043         nic->general_int_mask = 0;
2044 }
2045 /**
2046  *  en_dis_able_nic_intrs - Enable or Disable the interrupts
2047  *  @nic: device private variable,
2048  *  @mask: A mask indicating which Intr block must be modified and,
2049  *  @flag: A flag indicating whether to enable or disable the Intrs.
2050  *  Description: This function will either disable or enable the interrupts
2051  *  depending on the flag argument. The mask argument can be used to
2052  *  enable/disable any Intr block.
2053  *  Return Value: NONE.
2054  */
2055
2056 static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
2057 {
2058         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2059         register u64 temp64 = 0, intr_mask = 0;
2060
2061         intr_mask = nic->general_int_mask;
2062
2063         /*  Top level interrupt classification */
2064         /*  PIC Interrupts */
2065         if (mask & TX_PIC_INTR) {
2066                 /*  Enable PIC Intrs in the general intr mask register */
2067                 intr_mask |= TXPIC_INT_M;
2068                 if (flag == ENABLE_INTRS) {
2069                         /*
2070                          * If Hercules adapter enable GPIO otherwise
2071                          * disable all PCIX, Flash, MDIO, IIC and GPIO
2072                          * interrupts for now.
2073                          * TODO
2074                          */
2075                         if (s2io_link_fault_indication(nic) ==
2076                                         LINK_UP_DOWN_INTERRUPT ) {
2077                                 do_s2io_write_bits(PIC_INT_GPIO, flag,
2078                                                 &bar0->pic_int_mask);
2079                                 do_s2io_write_bits(GPIO_INT_MASK_LINK_UP, flag,
2080                                                 &bar0->gpio_int_mask);
2081                         } else
2082                                 writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
2083                 } else if (flag == DISABLE_INTRS) {
2084                         /*
2085                          * Disable PIC Intrs in the general
2086                          * intr mask register
2087                          */
2088                         writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
2089                 }
2090         }
2091
2092         /*  Tx traffic interrupts */
2093         if (mask & TX_TRAFFIC_INTR) {
2094                 intr_mask |= TXTRAFFIC_INT_M;
2095                 if (flag == ENABLE_INTRS) {
2096                         /*
2097                          * Enable all the Tx side interrupts
2098                          * writing 0 Enables all 64 TX interrupt levels
2099                          */
2100                         writeq(0x0, &bar0->tx_traffic_mask);
2101                 } else if (flag == DISABLE_INTRS) {
2102                         /*
2103                          * Disable Tx Traffic Intrs in the general intr mask
2104                          * register.
2105                          */
2106                         writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask);
2107                 }
2108         }
2109
2110         /*  Rx traffic interrupts */
2111         if (mask & RX_TRAFFIC_INTR) {
2112                 intr_mask |= RXTRAFFIC_INT_M;
2113                 if (flag == ENABLE_INTRS) {
2114                         /* writing 0 Enables all 8 RX interrupt levels */
2115                         writeq(0x0, &bar0->rx_traffic_mask);
2116                 } else if (flag == DISABLE_INTRS) {
2117                         /*
2118                          * Disable Rx Traffic Intrs in the general intr mask
2119                          * register.
2120                          */
2121                         writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask);
2122                 }
2123         }
2124
2125         temp64 = readq(&bar0->general_int_mask);
2126         if (flag == ENABLE_INTRS)
2127                 temp64 &= ~((u64) intr_mask);
2128         else
2129                 temp64 = DISABLE_ALL_INTRS;
2130         writeq(temp64, &bar0->general_int_mask);
2131
2132         nic->general_int_mask = readq(&bar0->general_int_mask);
2133 }
2134
2135 /**
2136  *  verify_pcc_quiescent- Checks for PCC quiescent state
2137  *  Return: 1 If PCC is quiescence
2138  *          0 If PCC is not quiescence
2139  */
2140 static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
2141 {
2142         int ret = 0, herc;
2143         struct XENA_dev_config __iomem *bar0 = sp->bar0;
2144         u64 val64 = readq(&bar0->adapter_status);
2145
2146         herc = (sp->device_type == XFRAME_II_DEVICE);
2147
2148         if (flag == FALSE) {
2149                 if ((!herc && (sp->pdev->revision >= 4)) || herc) {
2150                         if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
2151                                 ret = 1;
2152                 } else {
2153                         if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
2154                                 ret = 1;
2155                 }
2156         } else {
2157                 if ((!herc && (sp->pdev->revision >= 4)) || herc) {
2158                         if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
2159                              ADAPTER_STATUS_RMAC_PCC_IDLE))
2160                                 ret = 1;
2161                 } else {
2162                         if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) ==
2163                              ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
2164                                 ret = 1;
2165                 }
2166         }
2167
2168         return ret;
2169 }
2170 /**
2171  *  verify_xena_quiescence - Checks whether the H/W is ready
2172  *  Description: Returns whether the H/W is ready to go or not. Depending
2173  *  on whether adapter enable bit was written or not the comparison
2174  *  differs and the calling function passes the input argument flag to
2175  *  indicate this.
2176  *  Return: 1 If xena is quiescence
2177  *          0 If Xena is not quiescence
2178  */
2179
2180 static int verify_xena_quiescence(struct s2io_nic *sp)
2181 {
2182         int  mode;
2183         struct XENA_dev_config __iomem *bar0 = sp->bar0;
2184         u64 val64 = readq(&bar0->adapter_status);
2185         mode = s2io_verify_pci_mode(sp);
2186
2187         if (!(val64 & ADAPTER_STATUS_TDMA_READY)) {
2188                 DBG_PRINT(ERR_DBG, "%s", "TDMA is not ready!");
2189                 return 0;
2190         }
2191         if (!(val64 & ADAPTER_STATUS_RDMA_READY)) {
2192         DBG_PRINT(ERR_DBG, "%s", "RDMA is not ready!");
2193                 return 0;
2194         }
2195         if (!(val64 & ADAPTER_STATUS_PFC_READY)) {
2196                 DBG_PRINT(ERR_DBG, "%s", "PFC is not ready!");
2197                 return 0;
2198         }
2199         if (!(val64 & ADAPTER_STATUS_TMAC_BUF_EMPTY)) {
2200                 DBG_PRINT(ERR_DBG, "%s", "TMAC BUF is not empty!");
2201                 return 0;
2202         }
2203         if (!(val64 & ADAPTER_STATUS_PIC_QUIESCENT)) {
2204                 DBG_PRINT(ERR_DBG, "%s", "PIC is not QUIESCENT!");
2205                 return 0;
2206         }
2207         if (!(val64 & ADAPTER_STATUS_MC_DRAM_READY)) {
2208                 DBG_PRINT(ERR_DBG, "%s", "MC_DRAM is not ready!");
2209                 return 0;
2210         }
2211         if (!(val64 & ADAPTER_STATUS_MC_QUEUES_READY)) {
2212                 DBG_PRINT(ERR_DBG, "%s", "MC_QUEUES is not ready!");
2213                 return 0;
2214         }
2215         if (!(val64 & ADAPTER_STATUS_M_PLL_LOCK)) {
2216                 DBG_PRINT(ERR_DBG, "%s", "M_PLL is not locked!");
2217                 return 0;
2218         }
2219
2220         /*
2221          * In PCI 33 mode, the P_PLL is not used, and therefore,
2222          * the the P_PLL_LOCK bit in the adapter_status register will
2223          * not be asserted.
2224          */
2225         if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
2226                 sp->device_type == XFRAME_II_DEVICE && mode !=
2227                 PCI_MODE_PCI_33) {
2228                 DBG_PRINT(ERR_DBG, "%s", "P_PLL is not locked!");
2229                 return 0;
2230         }
2231         if (!((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
2232                         ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
2233                 DBG_PRINT(ERR_DBG, "%s", "RC_PRC is not QUIESCENT!");
2234                 return 0;
2235         }
2236         return 1;
2237 }
2238
2239 /**
2240  * fix_mac_address -  Fix for Mac addr problem on Alpha platforms
2241  * @sp: Pointer to device specifc structure
2242  * Description :
2243  * New procedure to clear mac address reading  problems on Alpha platforms
2244  *
2245  */
2246
2247 static void fix_mac_address(struct s2io_nic * sp)
2248 {
2249         struct XENA_dev_config __iomem *bar0 = sp->bar0;
2250         u64 val64;
2251         int i = 0;
2252
2253         while (fix_mac[i] != END_SIGN) {
2254                 writeq(fix_mac[i++], &bar0->gpio_control);
2255                 udelay(10);
2256                 val64 = readq(&bar0->gpio_control);
2257         }
2258 }
2259
2260 /**
2261  *  start_nic - Turns the device on
2262  *  @nic : device private variable.
2263  *  Description:
2264  *  This function actually turns the device on. Before this  function is
2265  *  called,all Registers are configured from their reset states
2266  *  and shared memory is allocated but the NIC is still quiescent. On
2267  *  calling this function, the device interrupts are cleared and the NIC is
2268  *  literally switched on by writing into the adapter control register.
2269  *  Return Value:
2270  *  SUCCESS on success and -1 on failure.
2271  */
2272
2273 static int start_nic(struct s2io_nic *nic)
2274 {
2275         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2276         struct net_device *dev = nic->dev;
2277         register u64 val64 = 0;
2278         u16 subid, i;
2279         struct mac_info *mac_control;
2280         struct config_param *config;
2281
2282         mac_control = &nic->mac_control;
2283         config = &nic->config;
2284
2285         /*  PRC Initialization and configuration */
2286         for (i = 0; i < config->rx_ring_num; i++) {
2287                 writeq((u64) mac_control->rings[i].rx_blocks[0].block_dma_addr,
2288                        &bar0->prc_rxd0_n[i]);
2289
2290                 val64 = readq(&bar0->prc_ctrl_n[i]);
2291                 if (nic->rxd_mode == RXD_MODE_1)
2292                         val64 |= PRC_CTRL_RC_ENABLED;
2293                 else
2294                         val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3;
2295                 if (nic->device_type == XFRAME_II_DEVICE)
2296                         val64 |= PRC_CTRL_GROUP_READS;
2297                 val64 &= ~PRC_CTRL_RXD_BACKOFF_INTERVAL(0xFFFFFF);
2298                 val64 |= PRC_CTRL_RXD_BACKOFF_INTERVAL(0x1000);
2299                 writeq(val64, &bar0->prc_ctrl_n[i]);
2300         }
2301
2302         if (nic->rxd_mode == RXD_MODE_3B) {
2303                 /* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */
2304                 val64 = readq(&bar0->rx_pa_cfg);
2305                 val64 |= RX_PA_CFG_IGNORE_L2_ERR;
2306                 writeq(val64, &bar0->rx_pa_cfg);
2307         }
2308
2309         if (vlan_tag_strip == 0) {
2310                 val64 = readq(&bar0->rx_pa_cfg);
2311                 val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
2312                 writeq(val64, &bar0->rx_pa_cfg);
2313                 vlan_strip_flag = 0;
2314         }
2315
2316         /*
2317          * Enabling MC-RLDRAM. After enabling the device, we timeout
2318          * for around 100ms, which is approximately the time required
2319          * for the device to be ready for operation.
2320          */
2321         val64 = readq(&bar0->mc_rldram_mrs);
2322         val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE | MC_RLDRAM_MRS_ENABLE;
2323         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
2324         val64 = readq(&bar0->mc_rldram_mrs);
2325
2326         msleep(100);    /* Delay by around 100 ms. */
2327
2328         /* Enabling ECC Protection. */
2329         val64 = readq(&bar0->adapter_control);
2330         val64 &= ~ADAPTER_ECC_EN;
2331         writeq(val64, &bar0->adapter_control);
2332
2333         /*
2334          * Verify if the device is ready to be enabled, if so enable
2335          * it.
2336          */
2337         val64 = readq(&bar0->adapter_status);
2338         if (!verify_xena_quiescence(nic)) {
2339                 DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name);
2340                 DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n",
2341                           (unsigned long long) val64);
2342                 return FAILURE;
2343         }
2344
2345         /*
2346          * With some switches, link might be already up at this point.
2347          * Because of this weird behavior, when we enable laser,
2348          * we may not get link. We need to handle this. We cannot
2349          * figure out which switch is misbehaving. So we are forced to
2350          * make a global change.
2351          */
2352
2353         /* Enabling Laser. */
2354         val64 = readq(&bar0->adapter_control);
2355         val64 |= ADAPTER_EOI_TX_ON;
2356         writeq(val64, &bar0->adapter_control);
2357
2358         if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
2359                 /*
2360                  * Dont see link state interrupts initally on some switches,
2361                  * so directly scheduling the link state task here.
2362                  */
2363                 schedule_work(&nic->set_link_task);
2364         }
2365         /* SXE-002: Initialize link and activity LED */
2366         subid = nic->pdev->subsystem_device;
2367         if (((subid & 0xFF) >= 0x07) &&
2368             (nic->device_type == XFRAME_I_DEVICE)) {
2369                 val64 = readq(&bar0->gpio_control);
2370                 val64 |= 0x0000800000000000ULL;
2371                 writeq(val64, &bar0->gpio_control);
2372                 val64 = 0x0411040400000000ULL;
2373                 writeq(val64, (void __iomem *)bar0 + 0x2700);
2374         }
2375
2376         return SUCCESS;
2377 }
2378 /**
2379  * s2io_txdl_getskb - Get the skb from txdl, unmap and return skb
2380  */
2381 static struct sk_buff *s2io_txdl_getskb(struct fifo_info *fifo_data, struct \
2382                                         TxD *txdlp, int get_off)
2383 {
2384         struct s2io_nic *nic = fifo_data->nic;
2385         struct sk_buff *skb;
2386         struct TxD *txds;
2387         u16 j, frg_cnt;
2388
2389         txds = txdlp;
2390         if (txds->Host_Control == (u64)(long)fifo_data->ufo_in_band_v) {
2391                 pci_unmap_single(nic->pdev, (dma_addr_t)
2392                         txds->Buffer_Pointer, sizeof(u64),
2393                         PCI_DMA_TODEVICE);
2394                 txds++;
2395         }
2396
2397         skb = (struct sk_buff *) ((unsigned long)
2398                         txds->Host_Control);
2399         if (!skb) {
2400                 memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds));
2401                 return NULL;
2402         }
2403         pci_unmap_single(nic->pdev, (dma_addr_t)
2404                          txds->Buffer_Pointer,
2405                          skb->len - skb->data_len,
2406                          PCI_DMA_TODEVICE);
2407         frg_cnt = skb_shinfo(skb)->nr_frags;
2408         if (frg_cnt) {
2409                 txds++;
2410                 for (j = 0; j < frg_cnt; j++, txds++) {
2411                         skb_frag_t *frag = &skb_shinfo(skb)->frags[j];
2412                         if (!txds->Buffer_Pointer)
2413                                 break;
2414                         pci_unmap_page(nic->pdev, (dma_addr_t)
2415                                         txds->Buffer_Pointer,
2416                                        frag->size, PCI_DMA_TODEVICE);
2417                 }
2418         }
2419         memset(txdlp,0, (sizeof(struct TxD) * fifo_data->max_txds));
2420         return(skb);
2421 }
2422
2423 /**
2424  *  free_tx_buffers - Free all queued Tx buffers
2425  *  @nic : device private variable.
2426  *  Description:
2427  *  Free all queued Tx buffers.
2428  *  Return Value: void
2429 */
2430
2431 static void free_tx_buffers(struct s2io_nic *nic)
2432 {
2433         struct net_device *dev = nic->dev;
2434         struct sk_buff *skb;
2435         struct TxD *txdp;
2436         int i, j;
2437         struct mac_info *mac_control;
2438         struct config_param *config;
2439         int cnt = 0;
2440
2441         mac_control = &nic->mac_control;
2442         config = &nic->config;
2443
2444         for (i = 0; i < config->tx_fifo_num; i++) {
2445                 unsigned long flags;
2446                 spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags);
2447                 for (j = 0; j < config->tx_cfg[i].fifo_len; j++) {
2448                         txdp = (struct TxD *) \
2449                         mac_control->fifos[i].list_info[j].list_virt_addr;
2450                         skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
2451                         if (skb) {
2452                                 nic->mac_control.stats_info->sw_stat.mem_freed
2453                                         += skb->truesize;
2454                                 dev_kfree_skb(skb);
2455                                 cnt++;
2456                         }
2457                 }
2458                 DBG_PRINT(INTR_DBG,
2459                           "%s:forcibly freeing %d skbs on FIFO%d\n",
2460                           dev->name, cnt, i);
2461                 mac_control->fifos[i].tx_curr_get_info.offset = 0;
2462                 mac_control->fifos[i].tx_curr_put_info.offset = 0;
2463                 spin_unlock_irqrestore(&mac_control->fifos[i].tx_lock, flags);
2464         }
2465 }
2466
2467 /**
2468  *   stop_nic -  To stop the nic
2469  *   @nic ; device private variable.
2470  *   Description:
2471  *   This function does exactly the opposite of what the start_nic()
2472  *   function does. This function is called to stop the device.
2473  *   Return Value:
2474  *   void.
2475  */
2476
2477 static void stop_nic(struct s2io_nic *nic)
2478 {
2479         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2480         register u64 val64 = 0;
2481         u16 interruptible;
2482         struct mac_info *mac_control;
2483         struct config_param *config;
2484
2485         mac_control = &nic->mac_control;
2486         config = &nic->config;
2487
2488         /*  Disable all interrupts */
2489         en_dis_err_alarms(nic, ENA_ALL_INTRS, DISABLE_INTRS);
2490         interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
2491         interruptible |= TX_PIC_INTR;
2492         en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
2493
2494         /* Clearing Adapter_En bit of ADAPTER_CONTROL Register */
2495         val64 = readq(&bar0->adapter_control);
2496         val64 &= ~(ADAPTER_CNTL_EN);
2497         writeq(val64, &bar0->adapter_control);
2498 }
2499
2500 /**
2501  *  fill_rx_buffers - Allocates the Rx side skbs
2502  *  @ring_info: per ring structure
2503  *  Description:
2504  *  The function allocates Rx side skbs and puts the physical
2505  *  address of these buffers into the RxD buffer pointers, so that the NIC
2506  *  can DMA the received frame into these locations.
2507  *  The NIC supports 3 receive modes, viz
2508  *  1. single buffer,
2509  *  2. three buffer and
2510  *  3. Five buffer modes.
2511  *  Each mode defines how many fragments the received frame will be split
2512  *  up into by the NIC. The frame is split into L3 header, L4 Header,
2513  *  L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself
2514  *  is split into 3 fragments. As of now only single buffer mode is
2515  *  supported.
2516  *   Return Value:
2517  *  SUCCESS on success or an appropriate -ve value on failure.
2518  */
2519
2520 static int fill_rx_buffers(struct ring_info *ring)
2521 {
2522         struct sk_buff *skb;
2523         struct RxD_t *rxdp;
2524         int off, size, block_no, block_no1;
2525         u32 alloc_tab = 0;
2526         u32 alloc_cnt;
2527         u64 tmp;
2528         struct buffAdd *ba;
2529         struct RxD_t *first_rxdp = NULL;
2530         u64 Buffer0_ptr = 0, Buffer1_ptr = 0;
2531         int rxd_index = 0;
2532         struct RxD1 *rxdp1;
2533         struct RxD3 *rxdp3;
2534         struct swStat *stats = &ring->nic->mac_control.stats_info->sw_stat;
2535
2536         alloc_cnt = ring->pkt_cnt - ring->rx_bufs_left;
2537
2538         block_no1 = ring->rx_curr_get_info.block_index;
2539         while (alloc_tab < alloc_cnt) {
2540                 block_no = ring->rx_curr_put_info.block_index;
2541
2542                 off = ring->rx_curr_put_info.offset;
2543
2544                 rxdp = ring->rx_blocks[block_no].rxds[off].virt_addr;
2545
2546                 rxd_index = off + 1;
2547                 if (block_no)
2548                         rxd_index += (block_no * ring->rxd_count);
2549
2550                 if ((block_no == block_no1) &&
2551                         (off == ring->rx_curr_get_info.offset) &&
2552                         (rxdp->Host_Control)) {
2553                         DBG_PRINT(INTR_DBG, "%s: Get and Put",
2554                                 ring->dev->name);
2555                         DBG_PRINT(INTR_DBG, " info equated\n");
2556                         goto end;
2557                 }
2558                 if (off && (off == ring->rxd_count)) {
2559                         ring->rx_curr_put_info.block_index++;
2560                         if (ring->rx_curr_put_info.block_index ==
2561                                                         ring->block_count)
2562                                 ring->rx_curr_put_info.block_index = 0;
2563                         block_no = ring->rx_curr_put_info.block_index;
2564                         off = 0;
2565                         ring->rx_curr_put_info.offset = off;
2566                         rxdp = ring->rx_blocks[block_no].block_virt_addr;
2567                         DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
2568                                   ring->dev->name, rxdp);
2569
2570                 }
2571
2572                 if ((rxdp->Control_1 & RXD_OWN_XENA) &&
2573                         ((ring->rxd_mode == RXD_MODE_3B) &&
2574                                 (rxdp->Control_2 & s2BIT(0)))) {
2575                         ring->rx_curr_put_info.offset = off;
2576                         goto end;
2577                 }
2578                 /* calculate size of skb based on ring mode */
2579                 size = ring->mtu + HEADER_ETHERNET_II_802_3_SIZE +
2580                                 HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
2581                 if (ring->rxd_mode == RXD_MODE_1)
2582                         size += NET_IP_ALIGN;
2583                 else
2584                         size = ring->mtu + ALIGN_SIZE + BUF0_LEN + 4;
2585
2586                 /* allocate skb */
2587                 skb = dev_alloc_skb(size);
2588                 if(!skb) {
2589                         DBG_PRINT(INFO_DBG, "%s: Out of ", ring->dev->name);
2590                         DBG_PRINT(INFO_DBG, "memory to allocate SKBs\n");
2591                         if (first_rxdp) {
2592                                 wmb();
2593                                 first_rxdp->Control_1 |= RXD_OWN_XENA;
2594                         }
2595                         stats->mem_alloc_fail_cnt++;
2596
2597                         return -ENOMEM ;
2598                 }
2599                 stats->mem_allocated += skb->truesize;
2600
2601                 if (ring->rxd_mode == RXD_MODE_1) {
2602                         /* 1 buffer mode - normal operation mode */
2603                         rxdp1 = (struct RxD1*)rxdp;
2604                         memset(rxdp, 0, sizeof(struct RxD1));
2605                         skb_reserve(skb, NET_IP_ALIGN);
2606                         rxdp1->Buffer0_ptr = pci_map_single
2607                             (ring->pdev, skb->data, size - NET_IP_ALIGN,
2608                                 PCI_DMA_FROMDEVICE);
2609                         if( (rxdp1->Buffer0_ptr == 0) ||
2610                                 (rxdp1->Buffer0_ptr ==
2611                                 DMA_ERROR_CODE))
2612                                 goto pci_map_failed;
2613
2614                         rxdp->Control_2 =
2615                                 SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
2616                         rxdp->Host_Control = (unsigned long) (skb);
2617                 } else if (ring->rxd_mode == RXD_MODE_3B) {
2618                         /*
2619                          * 2 buffer mode -
2620                          * 2 buffer mode provides 128
2621                          * byte aligned receive buffers.
2622                          */
2623
2624                         rxdp3 = (struct RxD3*)rxdp;
2625                         /* save buffer pointers to avoid frequent dma mapping */
2626                         Buffer0_ptr = rxdp3->Buffer0_ptr;
2627                         Buffer1_ptr = rxdp3->Buffer1_ptr;
2628                         memset(rxdp, 0, sizeof(struct RxD3));
2629                         /* restore the buffer pointers for dma sync*/
2630                         rxdp3->Buffer0_ptr = Buffer0_ptr;
2631                         rxdp3->Buffer1_ptr = Buffer1_ptr;
2632
2633                         ba = &ring->ba[block_no][off];
2634                         skb_reserve(skb, BUF0_LEN);
2635                         tmp = (u64)(unsigned long) skb->data;
2636                         tmp += ALIGN_SIZE;
2637                         tmp &= ~ALIGN_SIZE;
2638                         skb->data = (void *) (unsigned long)tmp;
2639                         skb_reset_tail_pointer(skb);
2640
2641                         if (!(rxdp3->Buffer0_ptr))
2642                                 rxdp3->Buffer0_ptr =
2643                                    pci_map_single(ring->pdev, ba->ba_0,
2644                                         BUF0_LEN, PCI_DMA_FROMDEVICE);
2645                         else
2646                                 pci_dma_sync_single_for_device(ring->pdev,
2647                                 (dma_addr_t) rxdp3->Buffer0_ptr,
2648                                     BUF0_LEN, PCI_DMA_FROMDEVICE);
2649                         if( (rxdp3->Buffer0_ptr == 0) ||
2650                                 (rxdp3->Buffer0_ptr == DMA_ERROR_CODE))
2651                                 goto pci_map_failed;
2652
2653                         rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
2654                         if (ring->rxd_mode == RXD_MODE_3B) {
2655                                 /* Two buffer mode */
2656
2657                                 /*
2658                                  * Buffer2 will have L3/L4 header plus
2659                                  * L4 payload
2660                                  */
2661                                 rxdp3->Buffer2_ptr = pci_map_single
2662                                 (ring->pdev, skb->data, ring->mtu + 4,
2663                                                 PCI_DMA_FROMDEVICE);
2664
2665                                 if( (rxdp3->Buffer2_ptr == 0) ||
2666                                         (rxdp3->Buffer2_ptr == DMA_ERROR_CODE))
2667                                         goto pci_map_failed;
2668
2669                                 if (!rxdp3->Buffer1_ptr)
2670                                         rxdp3->Buffer1_ptr =
2671                                                 pci_map_single(ring->pdev,
2672                                                 ba->ba_1, BUF1_LEN,
2673                                                 PCI_DMA_FROMDEVICE);
2674
2675                                 if( (rxdp3->Buffer1_ptr == 0) ||
2676                                         (rxdp3->Buffer1_ptr == DMA_ERROR_CODE)) {
2677                                         pci_unmap_single
2678                                                 (ring->pdev,
2679                                                 (dma_addr_t)(unsigned long)
2680                                                 skb->data,
2681                                                 ring->mtu + 4,
2682                                                 PCI_DMA_FROMDEVICE);
2683                                         goto pci_map_failed;
2684                                 }
2685                                 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
2686                                 rxdp->Control_2 |= SET_BUFFER2_SIZE_3
2687                                                                 (ring->mtu + 4);
2688                         }
2689                         rxdp->Control_2 |= s2BIT(0);
2690                         rxdp->Host_Control = (unsigned long) (skb);
2691                 }
2692                 if (alloc_tab & ((1 << rxsync_frequency) - 1))
2693                         rxdp->Control_1 |= RXD_OWN_XENA;
2694                 off++;
2695                 if (off == (ring->rxd_count + 1))
2696                         off = 0;
2697                 ring->rx_curr_put_info.offset = off;
2698
2699                 rxdp->Control_2 |= SET_RXD_MARKER;
2700                 if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) {
2701                         if (first_rxdp) {
2702                                 wmb();
2703                                 first_rxdp->Control_1 |= RXD_OWN_XENA;
2704                         }
2705                         first_rxdp = rxdp;
2706                 }
2707                 ring->rx_bufs_left += 1;
2708                 alloc_tab++;
2709         }
2710
2711       end:
2712         /* Transfer ownership of first descriptor to adapter just before
2713          * exiting. Before that, use memory barrier so that ownership
2714          * and other fields are seen by adapter correctly.
2715          */
2716         if (first_rxdp) {
2717                 wmb();
2718                 first_rxdp->Control_1 |= RXD_OWN_XENA;
2719         }
2720
2721         return SUCCESS;
2722 pci_map_failed:
2723         stats->pci_map_fail_cnt++;
2724         stats->mem_freed += skb->truesize;
2725         dev_kfree_skb_irq(skb);
2726         return -ENOMEM;
2727 }
2728
2729 static void free_rxd_blk(struct s2io_nic *sp, int ring_no, int blk)
2730 {
2731         struct net_device *dev = sp->dev;
2732         int j;
2733         struct sk_buff *skb;
2734         struct RxD_t *rxdp;
2735         struct mac_info *mac_control;
2736         struct buffAdd *ba;
2737         struct RxD1 *rxdp1;
2738         struct RxD3 *rxdp3;
2739
2740         mac_control = &sp->mac_control;
2741         for (j = 0 ; j < rxd_count[sp->rxd_mode]; j++) {
2742                 rxdp = mac_control->rings[ring_no].
2743                                 rx_blocks[blk].rxds[j].virt_addr;
2744                 skb = (struct sk_buff *)
2745                         ((unsigned long) rxdp->Host_Control);
2746                 if (!skb) {
2747                         continue;
2748                 }
2749                 if (sp->rxd_mode == RXD_MODE_1) {
2750                         rxdp1 = (struct RxD1*)rxdp;
2751                         pci_unmap_single(sp->pdev, (dma_addr_t)
2752                                 rxdp1->Buffer0_ptr,
2753                                 dev->mtu +
2754                                 HEADER_ETHERNET_II_802_3_SIZE
2755                                 + HEADER_802_2_SIZE +
2756                                 HEADER_SNAP_SIZE,
2757                                 PCI_DMA_FROMDEVICE);
2758                         memset(rxdp, 0, sizeof(struct RxD1));
2759                 } else if(sp->rxd_mode == RXD_MODE_3B) {
2760                         rxdp3 = (struct RxD3*)rxdp;
2761                         ba = &mac_control->rings[ring_no].
2762                                 ba[blk][j];
2763                         pci_unmap_single(sp->pdev, (dma_addr_t)
2764                                 rxdp3->Buffer0_ptr,
2765                                 BUF0_LEN,
2766                                 PCI_DMA_FROMDEVICE);
2767                         pci_unmap_single(sp->pdev, (dma_addr_t)
2768                                 rxdp3->Buffer1_ptr,
2769                                 BUF1_LEN,
2770                                 PCI_DMA_FROMDEVICE);
2771                         pci_unmap_single(sp->pdev, (dma_addr_t)
2772                                 rxdp3->Buffer2_ptr,
2773                                 dev->mtu + 4,
2774                                 PCI_DMA_FROMDEVICE);
2775                         memset(rxdp, 0, sizeof(struct RxD3));
2776                 }
2777                 sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
2778                 dev_kfree_skb(skb);
2779                 mac_control->rings[ring_no].rx_bufs_left -= 1;
2780         }
2781 }
2782
2783 /**
2784  *  free_rx_buffers - Frees all Rx buffers
2785  *  @sp: device private variable.
2786  *  Description:
2787  *  This function will free all Rx buffers allocated by host.
2788  *  Return Value:
2789  *  NONE.
2790  */
2791
2792 static void free_rx_buffers(struct s2io_nic *sp)
2793 {
2794         struct net_device *dev = sp->dev;
2795         int i, blk = 0, buf_cnt = 0;
2796         struct mac_info *mac_control;
2797         struct config_param *config;
2798
2799         mac_control = &sp->mac_control;
2800         config = &sp->config;
2801
2802         for (i = 0; i < config->rx_ring_num; i++) {
2803                 for (blk = 0; blk < rx_ring_sz[i]; blk++)
2804                         free_rxd_blk(sp,i,blk);
2805
2806                 mac_control->rings[i].rx_curr_put_info.block_index = 0;
2807                 mac_control->rings[i].rx_curr_get_info.block_index = 0;
2808                 mac_control->rings[i].rx_curr_put_info.offset = 0;
2809                 mac_control->rings[i].rx_curr_get_info.offset = 0;
2810                 mac_control->rings[i].rx_bufs_left = 0;
2811                 DBG_PRINT(INIT_DBG, "%s:Freed 0x%x Rx Buffers on ring%d\n",
2812                           dev->name, buf_cnt, i);
2813         }
2814 }
2815
2816 /**
2817  * s2io_poll - Rx interrupt handler for NAPI support
2818  * @napi : pointer to the napi structure.
2819  * @budget : The number of packets that were budgeted to be processed
2820  * during  one pass through the 'Poll" function.
2821  * Description:
2822  * Comes into picture only if NAPI support has been incorporated. It does
2823  * the same thing that rx_intr_handler does, but not in a interrupt context
2824  * also It will process only a given number of packets.
2825  * Return value:
2826  * 0 on success and 1 if there are No Rx packets to be processed.
2827  */
2828
2829 static int s2io_poll(struct napi_struct *napi, int budget)
2830 {
2831         struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
2832         struct net_device *dev = nic->dev;
2833         int pkt_cnt = 0, org_pkts_to_process;
2834         struct mac_info *mac_control;
2835         struct config_param *config;
2836         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2837         int i;
2838
2839         mac_control = &nic->mac_control;
2840         config = &nic->config;
2841
2842         nic->pkts_to_process = budget;
2843         org_pkts_to_process = nic->pkts_to_process;
2844
2845         writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
2846         readl(&bar0->rx_traffic_int);
2847
2848         for (i = 0; i < config->rx_ring_num; i++) {
2849                 rx_intr_handler(&mac_control->rings[i]);
2850                 pkt_cnt = org_pkts_to_process - nic->pkts_to_process;
2851                 if (!nic->pkts_to_process) {
2852                         /* Quota for the current iteration has been met */
2853                         goto no_rx;
2854                 }
2855         }
2856
2857         netif_rx_complete(dev, napi);
2858
2859         for (i = 0; i < config->rx_ring_num; i++) {
2860                 if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
2861                         DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
2862                         DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
2863                         break;
2864                 }
2865         }
2866         /* Re enable the Rx interrupts. */
2867         writeq(0x0, &bar0->rx_traffic_mask);
2868         readl(&bar0->rx_traffic_mask);
2869         return pkt_cnt;
2870
2871 no_rx:
2872         for (i = 0; i < config->rx_ring_num; i++) {
2873                 if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
2874                         DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
2875                         DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
2876                         break;
2877                 }
2878         }
2879         return pkt_cnt;
2880 }
2881
2882 #ifdef CONFIG_NET_POLL_CONTROLLER
2883 /**
2884  * s2io_netpoll - netpoll event handler entry point
2885  * @dev : pointer to the device structure.
2886  * Description:
2887  *      This function will be called by upper layer to check for events on the
2888  * interface in situations where interrupts are disabled. It is used for
2889  * specific in-kernel networking tasks, such as remote consoles and kernel
2890  * debugging over the network (example netdump in RedHat).
2891  */
2892 static void s2io_netpoll(struct net_device *dev)
2893 {
2894         struct s2io_nic *nic = dev->priv;
2895         struct mac_info *mac_control;
2896         struct config_param *config;
2897         struct XENA_dev_config __iomem *bar0 = nic->bar0;
2898         u64 val64 = 0xFFFFFFFFFFFFFFFFULL;
2899         int i;
2900
2901         if (pci_channel_offline(nic->pdev))
2902                 return;
2903
2904         disable_irq(dev->irq);
2905
2906         mac_control = &nic->mac_control;
2907         config = &nic->config;
2908
2909         writeq(val64, &bar0->rx_traffic_int);
2910         writeq(val64, &bar0->tx_traffic_int);
2911
2912         /* we need to free up the transmitted skbufs or else netpoll will
2913          * run out of skbs and will fail and eventually netpoll application such
2914          * as netdump will fail.
2915          */
2916         for (i = 0; i < config->tx_fifo_num; i++)
2917                 tx_intr_handler(&mac_control->fifos[i]);
2918
2919         /* check for received packet and indicate up to network */
2920         for (i = 0; i < config->rx_ring_num; i++)
2921                 rx_intr_handler(&mac_control->rings[i]);
2922
2923         for (i = 0; i < config->rx_ring_num; i++) {
2924                 if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
2925                         DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
2926                         DBG_PRINT(INFO_DBG, " in Rx Netpoll!!\n");
2927                         break;
2928                 }
2929         }
2930         enable_irq(dev->irq);
2931         return;
2932 }
2933 #endif
2934
2935 /**
2936  *  rx_intr_handler - Rx interrupt handler
2937  *  @nic: device private variable.
2938  *  Description:
2939  *  If the interrupt is because of a received frame or if the
2940  *  receive ring contains fresh as yet un-processed frames,this function is
2941  *  called. It picks out the RxD at which place the last Rx processing had
2942  *  stopped and sends the skb to the OSM's Rx handler and then increments
2943  *  the offset.
2944  *  Return Value:
2945  *  NONE.
2946  */
2947 static void rx_intr_handler(struct ring_info *ring_data)
2948 {
2949         int get_block, put_block;
2950         struct rx_curr_get_info get_info, put_info;
2951         struct RxD_t *rxdp;
2952         struct sk_buff *skb;
2953         int pkt_cnt = 0;
2954         int i;
2955         struct RxD1* rxdp1;
2956         struct RxD3* rxdp3;
2957
2958         get_info = ring_data->rx_curr_get_info;
2959         get_block = get_info.block_index;
2960         memcpy(&put_info, &ring_data->rx_curr_put_info, sizeof(put_info));
2961         put_block = put_info.block_index;
2962         rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr;
2963
2964         while (RXD_IS_UP2DT(rxdp)) {
2965                 /*
2966                  * If your are next to put index then it's
2967                  * FIFO full condition
2968                  */
2969                 if ((get_block == put_block) &&
2970                     (get_info.offset + 1) == put_info.offset) {
2971                         DBG_PRINT(INTR_DBG, "%s: Ring Full\n",
2972                                 ring_data->dev->name);
2973                         break;
2974                 }
2975                 skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control);
2976                 if (skb == NULL) {
2977                         DBG_PRINT(ERR_DBG, "%s: The skb is ",
2978                                   ring_data->dev->name);
2979                         DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
2980                         return;
2981                 }
2982                 if (ring_data->rxd_mode == RXD_MODE_1) {
2983                         rxdp1 = (struct RxD1*)rxdp;
2984                         pci_unmap_single(ring_data->pdev, (dma_addr_t)
2985                                 rxdp1->Buffer0_ptr,
2986                                 ring_data->mtu +
2987                                 HEADER_ETHERNET_II_802_3_SIZE +
2988                                 HEADER_802_2_SIZE +
2989                                 HEADER_SNAP_SIZE,
2990                                 PCI_DMA_FROMDEVICE);
2991                 } else if (ring_data->rxd_mode == RXD_MODE_3B) {
2992                         rxdp3 = (struct RxD3*)rxdp;
2993                         pci_dma_sync_single_for_cpu(ring_data->pdev, (dma_addr_t)
2994                                 rxdp3->Buffer0_ptr,
2995                                 BUF0_LEN, PCI_DMA_FROMDEVICE);
2996                         pci_unmap_single(ring_data->pdev, (dma_addr_t)
2997                                 rxdp3->Buffer2_ptr,
2998                                 ring_data->mtu + 4,
2999                                 PCI_DMA_FROMDEVICE);
3000                 }
3001                 prefetch(skb->data);
3002                 rx_osm_handler(ring_data, rxdp);
3003                 get_info.offset++;
3004                 ring_data->rx_curr_get_info.offset = get_info.offset;
3005                 rxdp = ring_data->rx_blocks[get_block].
3006                                 rxds[get_info.offset].virt_addr;
3007                 if (get_info.offset == rxd_count[ring_data->rxd_mode]) {
3008                         get_info.offset = 0;
3009                         ring_data->rx_curr_get_info.offset = get_info.offset;
3010                         get_block++;
3011                         if (get_block == ring_data->block_count)
3012                                 get_block = 0;
3013                         ring_data->rx_curr_get_info.block_index = get_block;
3014                         rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
3015                 }
3016
3017                 if(ring_data->nic->config.napi){
3018                         ring_data->nic->pkts_to_process -= 1;
3019                         if (!ring_data->nic->pkts_to_process)
3020                                 break;
3021                 }
3022                 pkt_cnt++;
3023                 if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
3024                         break;
3025         }
3026         if (ring_data->lro) {
3027                 /* Clear all LRO sessions before exiting */
3028                 for (i=0; i<MAX_LRO_SESSIONS; i++) {
3029                         struct lro *lro = &ring_data->lro0_n[i];
3030                         if (lro->in_use) {
3031                                 update_L3L4_header(ring_data->nic, lro);
3032                                 queue_rx_frame(lro->parent, lro->vlan_tag);
3033                                 clear_lro_session(lro);
3034                         }
3035                 }
3036         }
3037 }
3038
3039 /**
3040  *  tx_intr_handler - Transmit interrupt handler
3041  *  @nic : device private variable
3042  *  Description:
3043  *  If an interrupt was raised to indicate DMA complete of the
3044  *  Tx packet, this function is called. It identifies the last TxD
3045  *  whose buffer was freed and frees all skbs whose data have already
3046  *  DMA'ed into the NICs internal memory.
3047  *  Return Value:
3048  *  NONE
3049  */
3050
3051 static void tx_intr_handler(struct fifo_info *fifo_data)
3052 {
3053         struct s2io_nic *nic = fifo_data->nic;
3054         struct tx_curr_get_info get_info, put_info;
3055         struct sk_buff *skb = NULL;
3056         struct TxD *txdlp;
3057         int pkt_cnt = 0;
3058         unsigned long flags = 0;
3059         u8 err_mask;
3060
3061         if (!spin_trylock_irqsave(&fifo_data->tx_lock, flags))
3062                         return;
3063
3064         get_info = fifo_data->tx_curr_get_info;
3065         memcpy(&put_info, &fifo_data->tx_curr_put_info, sizeof(put_info));
3066         txdlp = (struct TxD *) fifo_data->list_info[get_info.offset].
3067             list_virt_addr;
3068         while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
3069                (get_info.offset != put_info.offset) &&
3070                (txdlp->Host_Control)) {
3071                 /* Check for TxD errors */
3072                 if (txdlp->Control_1 & TXD_T_CODE) {
3073                         unsigned long long err;
3074                         err = txdlp->Control_1 & TXD_T_CODE;
3075                         if (err & 0x1) {
3076                                 nic->mac_control.stats_info->sw_stat.
3077                                                 parity_err_cnt++;
3078                         }
3079
3080                         /* update t_code statistics */
3081                         err_mask = err >> 48;
3082                         switch(err_mask) {
3083                                 case 2:
3084                                         nic->mac_control.stats_info->sw_stat.
3085                                                         tx_buf_abort_cnt++;
3086                                 break;
3087
3088                                 case 3:
3089                                         nic->mac_control.stats_info->sw_stat.
3090                                                         tx_desc_abort_cnt++;
3091                                 break;
3092
3093                                 case 7:
3094                                         nic->mac_control.stats_info->sw_stat.
3095                                                         tx_parity_err_cnt++;
3096                                 break;
3097
3098                                 case 10:
3099                                         nic->mac_control.stats_info->sw_stat.
3100                                                         tx_link_loss_cnt++;
3101                                 break;
3102
3103                                 case 15:
3104                                         nic->mac_control.stats_info->sw_stat.
3105                                                         tx_list_proc_err_cnt++;
3106                                 break;
3107                         }
3108                 }
3109
3110                 skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset);
3111                 if (skb == NULL) {
3112                         spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
3113                         DBG_PRINT(ERR_DBG, "%s: Null skb ",
3114                         __FUNCTION__);
3115                         DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
3116                         return;
3117                 }
3118                 pkt_cnt++;
3119
3120                 /* Updating the statistics block */
3121                 nic->stats.tx_bytes += skb->len;
3122                 nic->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
3123                 dev_kfree_skb_irq(skb);
3124
3125                 get_info.offset++;
3126                 if (get_info.offset == get_info.fifo_len + 1)
3127                         get_info.offset = 0;
3128                 txdlp = (struct TxD *) fifo_data->list_info
3129                     [get_info.offset].list_virt_addr;
3130                 fifo_data->tx_curr_get_info.offset =
3131                     get_info.offset;
3132         }
3133
3134         s2io_wake_tx_queue(fifo_data, pkt_cnt, nic->config.multiq);
3135
3136         spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
3137 }
3138
3139 /**
3140  *  s2io_mdio_write - Function to write in to MDIO registers
3141  *  @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
3142  *  @addr     : address value
3143  *  @value    : data value
3144  *  @dev      : pointer to net_device structure
3145  *  Description:
3146  *  This function is used to write values to the MDIO registers
3147  *  NONE
3148  */
3149 static void s2io_mdio_write(u32 mmd_type, u64 addr, u16 value, struct net_device *dev)
3150 {
3151         u64 val64 = 0x0;
3152         struct s2io_nic *sp = dev->priv;
3153         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3154
3155         //address transaction
3156         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3157                         | MDIO_MMD_DEV_ADDR(mmd_type)
3158                         | MDIO_MMS_PRT_ADDR(0x0);
3159         writeq(val64, &bar0->mdio_control);
3160         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3161         writeq(val64, &bar0->mdio_control);
3162         udelay(100);
3163
3164         //Data transaction
3165         val64 = 0x0;
3166         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3167                         | MDIO_MMD_DEV_ADDR(mmd_type)
3168                         | MDIO_MMS_PRT_ADDR(0x0)
3169                         | MDIO_MDIO_DATA(value)
3170                         | MDIO_OP(MDIO_OP_WRITE_TRANS);
3171         writeq(val64, &bar0->mdio_control);
3172         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3173         writeq(val64, &bar0->mdio_control);
3174         udelay(100);
3175
3176         val64 = 0x0;
3177         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3178         | MDIO_MMD_DEV_ADDR(mmd_type)
3179         | MDIO_MMS_PRT_ADDR(0x0)
3180         | MDIO_OP(MDIO_OP_READ_TRANS);
3181         writeq(val64, &bar0->mdio_control);
3182         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3183         writeq(val64, &bar0->mdio_control);
3184         udelay(100);
3185
3186 }
3187
3188 /**
3189  *  s2io_mdio_read - Function to write in to MDIO registers
3190  *  @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
3191  *  @addr     : address value
3192  *  @dev      : pointer to net_device structure
3193  *  Description:
3194  *  This function is used to read values to the MDIO registers
3195  *  NONE
3196  */
3197 static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev)
3198 {
3199         u64 val64 = 0x0;
3200         u64 rval64 = 0x0;
3201         struct s2io_nic *sp = dev->priv;
3202         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3203
3204         /* address transaction */
3205         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3206                         | MDIO_MMD_DEV_ADDR(mmd_type)
3207                         | MDIO_MMS_PRT_ADDR(0x0);
3208         writeq(val64, &bar0->mdio_control);
3209         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3210         writeq(val64, &bar0->mdio_control);
3211         udelay(100);
3212
3213         /* Data transaction */
3214         val64 = 0x0;
3215         val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
3216                         | MDIO_MMD_DEV_ADDR(mmd_type)
3217                         | MDIO_MMS_PRT_ADDR(0x0)
3218                         | MDIO_OP(MDIO_OP_READ_TRANS);
3219         writeq(val64, &bar0->mdio_control);
3220         val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3221         writeq(val64, &bar0->mdio_control);
3222         udelay(100);
3223
3224         /* Read the value from regs */
3225         rval64 = readq(&bar0->mdio_control);
3226         rval64 = rval64 & 0xFFFF0000;
3227         rval64 = rval64 >> 16;
3228         return rval64;
3229 }
3230 /**
3231  *  s2io_chk_xpak_counter - Function to check the status of the xpak counters
3232  *  @counter      : couter value to be updated
3233  *  @flag         : flag to indicate the status
3234  *  @type         : counter type
3235  *  Description:
3236  *  This function is to check the status of the xpak counters value
3237  *  NONE
3238  */
3239
3240 static void s2io_chk_xpak_counter(u64 *counter, u64 * regs_stat, u32 index, u16 flag, u16 type)
3241 {
3242         u64 mask = 0x3;
3243         u64 val64;
3244         int i;
3245         for(i = 0; i <index; i++)
3246                 mask = mask << 0x2;
3247
3248         if(flag > 0)
3249         {
3250                 *counter = *counter + 1;
3251                 val64 = *regs_stat & mask;
3252                 val64 = val64 >> (index * 0x2);
3253                 val64 = val64 + 1;
3254                 if(val64 == 3)
3255                 {
3256                         switch(type)
3257                         {
3258                         case 1:
3259                                 DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
3260                                           "service. Excessive temperatures may "
3261                                           "result in premature transceiver "
3262                                           "failure \n");
3263                         break;
3264                         case 2:
3265                                 DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
3266                                           "service Excessive bias currents may "
3267                                           "indicate imminent laser diode "
3268                                           "failure \n");
3269                         break;
3270                         case 3:
3271                                 DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
3272                                           "service Excessive laser output "
3273                                           "power may saturate far-end "
3274                                           "receiver\n");
3275                         break;
3276                         default:
3277                                 DBG_PRINT(ERR_DBG, "Incorrect XPAK Alarm "
3278                                           "type \n");
3279                         }
3280                         val64 = 0x0;
3281                 }
3282                 val64 = val64 << (index * 0x2);
3283                 *regs_stat = (*regs_stat & (~mask)) | (val64);
3284
3285         } else {
3286                 *regs_stat = *regs_stat & (~mask);
3287         }
3288 }
3289
3290 /**
3291  *  s2io_updt_xpak_counter - Function to update the xpak counters
3292  *  @dev         : pointer to net_device struct
3293  *  Description:
3294  *  This function is to upate the status of the xpak counters value
3295  *  NONE
3296  */
3297 static void s2io_updt_xpak_counter(struct net_device *dev)
3298 {
3299         u16 flag  = 0x0;
3300         u16 type  = 0x0;
3301         u16 val16 = 0x0;
3302         u64 val64 = 0x0;
3303         u64 addr  = 0x0;
3304
3305         struct s2io_nic *sp = dev->priv;
3306         struct stat_block *stat_info = sp->mac_control.stats_info;
3307
3308         /* Check the communication with the MDIO slave */
3309         addr = 0x0000;
3310         val64 = 0x0;
3311         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3312         if((val64 == 0xFFFF) || (val64 == 0x0000))
3313         {
3314                 DBG_PRINT(ERR_DBG, "ERR: MDIO slave access failed - "
3315                           "Returned %llx\n", (unsigned long long)val64);
3316                 return;
3317         }
3318
3319         /* Check for the expecte value of 2040 at PMA address 0x0000 */
3320         if(val64 != 0x2040)
3321         {
3322                 DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - ");
3323                 DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x2040\n",
3324                           (unsigned long long)val64);
3325                 return;
3326         }
3327
3328         /* Loading the DOM register to MDIO register */
3329         addr = 0xA100;
3330         s2io_mdio_write(MDIO_MMD_PMA_DEV_ADDR, addr, val16, dev);
3331         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3332
3333         /* Reading the Alarm flags */
3334         addr = 0xA070;
3335         val64 = 0x0;
3336         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3337
3338         flag = CHECKBIT(val64, 0x7);
3339         type = 1;
3340         s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_transceiver_temp_high,
3341                                 &stat_info->xpak_stat.xpak_regs_stat,
3342                                 0x0, flag, type);
3343
3344         if(CHECKBIT(val64, 0x6))
3345                 stat_info->xpak_stat.alarm_transceiver_temp_low++;
3346
3347         flag = CHECKBIT(val64, 0x3);
3348         type = 2;
3349         s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_laser_bias_current_high,
3350                                 &stat_info->xpak_stat.xpak_regs_stat,
3351                                 0x2, flag, type);
3352
3353         if(CHECKBIT(val64, 0x2))
3354                 stat_info->xpak_stat.alarm_laser_bias_current_low++;
3355
3356         flag = CHECKBIT(val64, 0x1);
3357         type = 3;
3358         s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_laser_output_power_high,
3359                                 &stat_info->xpak_stat.xpak_regs_stat,
3360                                 0x4, flag, type);
3361
3362         if(CHECKBIT(val64, 0x0))
3363                 stat_info->xpak_stat.alarm_laser_output_power_low++;
3364
3365         /* Reading the Warning flags */
3366         addr = 0xA074;
3367         val64 = 0x0;
3368         val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3369
3370         if(CHECKBIT(val64, 0x7))
3371                 stat_info->xpak_stat.warn_transceiver_temp_high++;
3372
3373         if(CHECKBIT(val64, 0x6))
3374                 stat_info->xpak_stat.warn_transceiver_temp_low++;
3375
3376         if(CHECKBIT(val64, 0x3))
3377                 stat_info->xpak_stat.warn_laser_bias_current_high++;
3378
3379         if(CHECKBIT(val64, 0x2))
3380                 stat_info->xpak_stat.warn_laser_bias_current_low++;
3381
3382         if(CHECKBIT(val64, 0x1))
3383                 stat_info->xpak_stat.warn_laser_output_power_high++;
3384
3385         if(CHECKBIT(val64, 0x0))
3386                 stat_info->xpak_stat.warn_laser_output_power_low++;
3387 }
3388
3389 /**
3390  *  wait_for_cmd_complete - waits for a command to complete.
3391  *  @sp : private member of the device structure, which is a pointer to the
3392  *  s2io_nic structure.
3393  *  Description: Function that waits for a command to Write into RMAC
3394  *  ADDR DATA registers to be completed and returns either success or
3395  *  error depending on whether the command was complete or not.
3396  *  Return value:
3397  *   SUCCESS on success and FAILURE on failure.
3398  */
3399
3400 static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit,
3401                                 int bit_state)
3402 {
3403         int ret = FAILURE, cnt = 0, delay = 1;
3404         u64 val64;
3405
3406         if ((bit_state != S2IO_BIT_RESET) && (bit_state != S2IO_BIT_SET))
3407                 return FAILURE;
3408
3409         do {
3410                 val64 = readq(addr);
3411                 if (bit_state == S2IO_BIT_RESET) {
3412                         if (!(val64 & busy_bit)) {
3413                                 ret = SUCCESS;
3414                                 break;
3415                         }
3416                 } else {
3417                         if (!(val64 & busy_bit)) {
3418                                 ret = SUCCESS;
3419                                 break;
3420                         }
3421                 }
3422
3423                 if(in_interrupt())
3424                         mdelay(delay);
3425                 else
3426                         msleep(delay);
3427
3428                 if (++cnt >= 10)
3429                         delay = 50;
3430         } while (cnt < 20);
3431         return ret;
3432 }
3433 /*
3434  * check_pci_device_id - Checks if the device id is supported
3435  * @id : device id
3436  * Description: Function to check if the pci device id is supported by driver.
3437  * Return value: Actual device id if supported else PCI_ANY_ID
3438  */
3439 static u16 check_pci_device_id(u16 id)
3440 {
3441         switch (id) {
3442         case PCI_DEVICE_ID_HERC_WIN:
3443         case PCI_DEVICE_ID_HERC_UNI:
3444                 return XFRAME_II_DEVICE;
3445         case PCI_DEVICE_ID_S2IO_UNI:
3446         case PCI_DEVICE_ID_S2IO_WIN:
3447                 return XFRAME_I_DEVICE;
3448         default:
3449                 return PCI_ANY_ID;
3450         }
3451 }
3452
3453 /**
3454  *  s2io_reset - Resets the card.
3455  *  @sp : private member of the device structure.
3456  *  Description: Function to Reset the card. This function then also
3457  *  restores the previously saved PCI configuration space registers as
3458  *  the card reset also resets the configuration space.
3459  *  Return value:
3460  *  void.
3461  */
3462
3463 static void s2io_reset(struct s2io_nic * sp)
3464 {
3465         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3466         u64 val64;
3467         u16 subid, pci_cmd;
3468         int i;
3469         u16 val16;
3470         unsigned long long up_cnt, down_cnt, up_time, down_time, reset_cnt;
3471         unsigned long long mem_alloc_cnt, mem_free_cnt, watchdog_cnt;
3472
3473         DBG_PRINT(INIT_DBG,"%s - Resetting XFrame card %s\n",
3474                         __FUNCTION__, sp->dev->name);
3475
3476         /* Back up  the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
3477         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
3478
3479         val64 = SW_RESET_ALL;
3480         writeq(val64, &bar0->sw_reset);
3481         if (strstr(sp->product_name, "CX4")) {
3482                 msleep(750);
3483         }
3484         msleep(250);
3485         for (i = 0; i < S2IO_MAX_PCI_CONFIG_SPACE_REINIT; i++) {
3486
3487                 /* Restore the PCI state saved during initialization. */
3488                 pci_restore_state(sp->pdev);
3489                 pci_read_config_word(sp->pdev, 0x2, &val16);
3490                 if (check_pci_device_id(val16) != (u16)PCI_ANY_ID)
3491                         break;
3492                 msleep(200);
3493         }
3494
3495         if (check_pci_device_id(val16) == (u16)PCI_ANY_ID) {
3496                 DBG_PRINT(ERR_DBG,"%s SW_Reset failed!\n", __FUNCTION__);
3497         }
3498
3499         pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, pci_cmd);
3500
3501         s2io_init_pci(sp);
3502
3503         /* Set swapper to enable I/O register access */
3504         s2io_set_swapper(sp);
3505
3506         /* restore mac_addr entries */
3507         do_s2io_restore_unicast_mc(sp);
3508
3509         /* Restore the MSIX table entries from local variables */
3510         restore_xmsi_data(sp);
3511
3512         /* Clear certain PCI/PCI-X fields after reset */
3513         if (sp->device_type == XFRAME_II_DEVICE) {
3514                 /* Clear "detected parity error" bit */
3515                 pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000);
3516
3517                 /* Clearing PCIX Ecc status register */
3518                 pci_write_config_dword(sp->pdev, 0x68, 0x7C);
3519
3520                 /* Clearing PCI_STATUS error reflected here */
3521                 writeq(s2BIT(62), &bar0->txpic_int_reg);
3522         }
3523
3524         /* Reset device statistics maintained by OS */
3525         memset(&sp->stats, 0, sizeof (struct net_device_stats));
3526
3527         up_cnt = sp->mac_control.stats_info->sw_stat.link_up_cnt;
3528         down_cnt = sp->mac_control.stats_info->sw_stat.link_down_cnt;
3529         up_time = sp->mac_control.stats_info->sw_stat.link_up_time;
3530         down_time = sp->mac_control.stats_info->sw_stat.link_down_time;
3531         reset_cnt = sp->mac_control.stats_info->sw_stat.soft_reset_cnt;
3532         mem_alloc_cnt = sp->mac_control.stats_info->sw_stat.mem_allocated;
3533         mem_free_cnt = sp->mac_control.stats_info->sw_stat.mem_freed;
3534         watchdog_cnt = sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt;
3535         /* save link up/down time/cnt, reset/memory/watchdog cnt */
3536         memset(sp->mac_control.stats_info, 0, sizeof(struct stat_block));
3537         /* restore link up/down time/cnt, reset/memory/watchdog cnt */
3538         sp->mac_control.stats_info->sw_stat.link_up_cnt = up_cnt;
3539         sp->mac_control.stats_info->sw_stat.link_down_cnt = down_cnt;
3540         sp->mac_control.stats_info->sw_stat.link_up_time = up_time;
3541         sp->mac_control.stats_info->sw_stat.link_down_time = down_time;
3542         sp->mac_control.stats_info->sw_stat.soft_reset_cnt = reset_cnt;
3543         sp->mac_control.stats_info->sw_stat.mem_allocated = mem_alloc_cnt;
3544         sp->mac_control.stats_info->sw_stat.mem_freed = mem_free_cnt;
3545         sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt = watchdog_cnt;
3546
3547         /* SXE-002: Configure link and activity LED to turn it off */
3548         subid = sp->pdev->subsystem_device;
3549         if (((subid & 0xFF) >= 0x07) &&
3550             (sp->device_type == XFRAME_I_DEVICE)) {
3551                 val64 = readq(&bar0->gpio_control);
3552                 val64 |= 0x0000800000000000ULL;
3553                 writeq(val64, &bar0->gpio_control);
3554                 val64 = 0x0411040400000000ULL;
3555                 writeq(val64, (void __iomem *)bar0 + 0x2700);
3556         }
3557
3558         /*
3559          * Clear spurious ECC interrupts that would have occured on
3560          * XFRAME II cards after reset.
3561          */
3562         if (sp->device_type == XFRAME_II_DEVICE) {
3563                 val64 = readq(&bar0->pcc_err_reg);
3564                 writeq(val64, &bar0->pcc_err_reg);
3565         }
3566
3567         sp->device_enabled_once = FALSE;
3568 }
3569
3570 /**
3571  *  s2io_set_swapper - to set the swapper controle on the card
3572  *  @sp : private member of the device structure,
3573  *  pointer to the s2io_nic structure.
3574  *  Description: Function to set the swapper control on the card
3575  *  correctly depending on the 'endianness' of the system.
3576  *  Return value:
3577  *  SUCCESS on success and FAILURE on failure.
3578  */
3579
3580 static int s2io_set_swapper(struct s2io_nic * sp)
3581 {
3582         struct net_device *dev = sp->dev;
3583         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3584         u64 val64, valt, valr;
3585
3586         /*
3587          * Set proper endian settings and verify the same by reading
3588          * the PIF Feed-back register.
3589          */
3590
3591         val64 = readq(&bar0->pif_rd_swapper_fb);
3592         if (val64 != 0x0123456789ABCDEFULL) {
3593                 int i = 0;
3594                 u64 value[] = { 0xC30000C3C30000C3ULL,   /* FE=1, SE=1 */
3595                                 0x8100008181000081ULL,  /* FE=1, SE=0 */
3596                                 0x4200004242000042ULL,  /* FE=0, SE=1 */
3597                                 0};                     /* FE=0, SE=0 */
3598
3599                 while(i<4) {
3600                         writeq(value[i], &bar0->swapper_ctrl);
3601                         val64 = readq(&bar0->pif_rd_swapper_fb);
3602                         if (val64 == 0x0123456789ABCDEFULL)
3603                                 break;
3604                         i++;
3605                 }
3606                 if (i == 4) {
3607                         DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
3608                                 dev->name);
3609                         DBG_PRINT(ERR_DBG, "feedback read %llx\n",
3610                                 (unsigned long long) val64);
3611                         return FAILURE;
3612                 }
3613                 valr = value[i];
3614         } else {
3615                 valr = readq(&bar0->swapper_ctrl);
3616         }
3617
3618         valt = 0x0123456789ABCDEFULL;
3619         writeq(valt, &bar0->xmsi_address);
3620         val64 = readq(&bar0->xmsi_address);
3621
3622         if(val64 != valt) {
3623                 int i = 0;
3624                 u64 value[] = { 0x00C3C30000C3C300ULL,  /* FE=1, SE=1 */
3625                                 0x0081810000818100ULL,  /* FE=1, SE=0 */
3626                                 0x0042420000424200ULL,  /* FE=0, SE=1 */
3627                                 0};                     /* FE=0, SE=0 */
3628
3629                 while(i<4) {
3630                         writeq((value[i] | valr), &bar0->swapper_ctrl);
3631                         writeq(valt, &bar0->xmsi_address);
3632                         val64 = readq(&bar0->xmsi_address);
3633                         if(val64 == valt)
3634                                 break;
3635                         i++;
3636                 }
3637                 if(i == 4) {
3638                         unsigned long long x = val64;
3639                         DBG_PRINT(ERR_DBG, "Write failed, Xmsi_addr ");
3640                         DBG_PRINT(ERR_DBG, "reads:0x%llx\n", x);
3641                         return FAILURE;
3642                 }
3643         }
3644         val64 = readq(&bar0->swapper_ctrl);
3645         val64 &= 0xFFFF000000000000ULL;
3646
3647 #ifdef  __BIG_ENDIAN
3648         /*
3649          * The device by default set to a big endian format, so a
3650          * big endian driver need not set anything.
3651          */
3652         val64 |= (SWAPPER_CTRL_TXP_FE |
3653                  SWAPPER_CTRL_TXP_SE |
3654                  SWAPPER_CTRL_TXD_R_FE |
3655                  SWAPPER_CTRL_TXD_W_FE |
3656                  SWAPPER_CTRL_TXF_R_FE |
3657                  SWAPPER_CTRL_RXD_R_FE |
3658                  SWAPPER_CTRL_RXD_W_FE |
3659                  SWAPPER_CTRL_RXF_W_FE |
3660                  SWAPPER_CTRL_XMSI_FE |
3661                  SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
3662         if (sp->config.intr_type == INTA)
3663                 val64 |= SWAPPER_CTRL_XMSI_SE;
3664         writeq(val64, &bar0->swapper_ctrl);
3665 #else
3666         /*
3667          * Initially we enable all bits to make it accessible by the
3668          * driver, then we selectively enable only those bits that
3669          * we want to set.
3670          */
3671         val64 |= (SWAPPER_CTRL_TXP_FE |
3672                  SWAPPER_CTRL_TXP_SE |
3673                  SWAPPER_CTRL_TXD_R_FE |
3674                  SWAPPER_CTRL_TXD_R_SE |
3675                  SWAPPER_CTRL_TXD_W_FE |
3676                  SWAPPER_CTRL_TXD_W_SE |
3677                  SWAPPER_CTRL_TXF_R_FE |
3678                  SWAPPER_CTRL_RXD_R_FE |
3679                  SWAPPER_CTRL_RXD_R_SE |
3680                  SWAPPER_CTRL_RXD_W_FE |
3681                  SWAPPER_CTRL_RXD_W_SE |
3682                  SWAPPER_CTRL_RXF_W_FE |
3683                  SWAPPER_CTRL_XMSI_FE |
3684                  SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
3685         if (sp->config.intr_type == INTA)
3686                 val64 |= SWAPPER_CTRL_XMSI_SE;
3687         writeq(val64, &bar0->swapper_ctrl);
3688 #endif
3689         val64 = readq(&bar0->swapper_ctrl);
3690
3691         /*
3692          * Verifying if endian settings are accurate by reading a
3693          * feedback register.
3694          */
3695         val64 = readq(&bar0->pif_rd_swapper_fb);
3696         if (val64 != 0x0123456789ABCDEFULL) {
3697                 /* Endian settings are incorrect, calls for another dekko. */
3698                 DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
3699                           dev->name);
3700                 DBG_PRINT(ERR_DBG, "feedback read %llx\n",
3701                           (unsigned long long) val64);
3702                 return FAILURE;
3703         }
3704
3705         return SUCCESS;
3706 }
3707
3708 static int wait_for_msix_trans(struct s2io_nic *nic, int i)
3709 {
3710         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3711         u64 val64;
3712         int ret = 0, cnt = 0;
3713
3714         do {
3715                 val64 = readq(&bar0->xmsi_access);
3716                 if (!(val64 & s2BIT(15)))
3717                         break;
3718                 mdelay(1);
3719                 cnt++;
3720         } while(cnt < 5);
3721         if (cnt == 5) {
3722                 DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);
3723                 ret = 1;
3724         }
3725
3726         return ret;
3727 }
3728
3729 static void restore_xmsi_data(struct s2io_nic *nic)
3730 {
3731         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3732         u64 val64;
3733         int i;
3734
3735         for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
3736                 writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
3737                 writeq(nic->msix_info[i].data, &bar0->xmsi_data);
3738                 val64 = (s2BIT(7) | s2BIT(15) | vBIT(i, 26, 6));
3739                 writeq(val64, &bar0->xmsi_access);
3740                 if (wait_for_msix_trans(nic, i)) {
3741                         DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
3742                         continue;
3743                 }
3744         }
3745 }
3746
3747 static void store_xmsi_data(struct s2io_nic *nic)
3748 {
3749         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3750         u64 val64, addr, data;
3751         int i;
3752
3753         /* Store and display */
3754         for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
3755                 val64 = (s2BIT(15) | vBIT(i, 26, 6));
3756                 writeq(val64, &bar0->xmsi_access);
3757                 if (wait_for_msix_trans(nic, i)) {
3758                         DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
3759                         continue;
3760                 }
3761                 addr = readq(&bar0->xmsi_address);
3762                 data = readq(&bar0->xmsi_data);
3763                 if (addr && data) {
3764                         nic->msix_info[i].addr = addr;
3765                         nic->msix_info[i].data = data;
3766                 }
3767         }
3768 }
3769
3770 static int s2io_enable_msi_x(struct s2io_nic *nic)
3771 {
3772         struct XENA_dev_config __iomem *bar0 = nic->bar0;
3773         u64 tx_mat, rx_mat;
3774         u16 msi_control; /* Temp variable */
3775         int ret, i, j, msix_indx = 1;
3776
3777         nic->entries = kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct msix_entry),
3778                                GFP_KERNEL);
3779         if (!nic->entries) {
3780                 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", \
3781                         __FUNCTION__);
3782                 nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
3783                 return -ENOMEM;
3784         }
3785         nic->mac_control.stats_info->sw_stat.mem_allocated
3786                 += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
3787
3788         nic->s2io_entries =
3789                 kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct s2io_msix_entry),
3790                                    GFP_KERNEL);
3791         if (!nic->s2io_entries) {
3792                 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
3793                         __FUNCTION__);
3794                 nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
3795                 kfree(nic->entries);
3796                 nic->mac_control.stats_info->sw_stat.mem_freed
3797                         += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
3798                 return -ENOMEM;
3799         }
3800          nic->mac_control.stats_info->sw_stat.mem_allocated
3801                 += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
3802
3803         for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
3804                 nic->entries[i].entry = i;
3805                 nic->s2io_entries[i].entry = i;
3806                 nic->s2io_entries[i].arg = NULL;
3807                 nic->s2io_entries[i].in_use = 0;
3808         }
3809
3810         tx_mat = readq(&bar0->tx_mat0_n[0]);
3811         for (i=0; i<nic->config.tx_fifo_num; i++, msix_indx++) {
3812                 tx_mat |= TX_MAT_SET(i, msix_indx);
3813                 nic->s2io_entries[msix_indx].arg = &nic->mac_control.fifos[i];
3814                 nic->s2io_entries[msix_indx].type = MSIX_FIFO_TYPE;
3815                 nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
3816         }
3817         writeq(tx_mat, &bar0->tx_mat0_n[0]);
3818
3819         rx_mat = readq(&bar0->rx_mat);
3820         for (j = 0; j < nic->config.rx_ring_num; j++, msix_indx++) {
3821                 rx_mat |= RX_MAT_SET(j, msix_indx);
3822                 nic->s2io_entries[msix_indx].arg
3823                         = &nic->mac_control.rings[j];
3824                 nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
3825                 nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
3826         }
3827         writeq(rx_mat, &bar0->rx_mat);
3828
3829         nic->avail_msix_vectors = 0;
3830         ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X);
3831         /* We fail init if error or we get less vectors than min required */
3832         if (ret >= (nic->config.tx_fifo_num + nic->config.rx_ring_num + 1)) {
3833                 nic->avail_msix_vectors = ret;
3834                 ret = pci_enable_msix(nic->pdev, nic->entries, ret);
3835         }
3836         if (ret) {
3837                 DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
3838                 kfree(nic->entries);
3839                 nic->mac_control.stats_info->sw_stat.mem_freed
3840                         += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
3841                 kfree(nic->s2io_entries);
3842                 nic->mac_control.stats_info->sw_stat.mem_freed
3843                 += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
3844                 nic->entries = NULL;
3845                 nic->s2io_entries = NULL;
3846                 nic->avail_msix_vectors = 0;
3847                 return -ENOMEM;
3848         }
3849         if (!nic->avail_msix_vectors)
3850                 nic->avail_msix_vectors = MAX_REQUESTED_MSI_X;
3851
3852         /*
3853          * To enable MSI-X, MSI also needs to be enabled, due to a bug
3854          * in the herc NIC. (Temp change, needs to be removed later)
3855          */
3856         pci_read_config_word(nic->pdev, 0x42, &msi_control);
3857         msi_control |= 0x1; /* Enable MSI */
3858         pci_write_config_word(nic->pdev, 0x42, msi_control);
3859
3860         return 0;
3861 }
3862
3863 /* Handle software interrupt used during MSI(X) test */
3864 static irqreturn_t s2io_test_intr(int irq, void *dev_id)
3865 {
3866         struct s2io_nic *sp = dev_id;
3867
3868         sp->msi_detected = 1;
3869         wake_up(&sp->msi_wait);
3870
3871         return IRQ_HANDLED;
3872 }
3873
3874 /* Test interrupt path by forcing a a software IRQ */
3875 static int s2io_test_msi(struct s2io_nic *sp)
3876 {
3877         struct pci_dev *pdev = sp->pdev;
3878         struct XENA_dev_config __iomem *bar0 = sp->bar0;
3879         int err;
3880         u64 val64, saved64;
3881
3882         err = request_irq(sp->entries[1].vector, s2io_test_intr, 0,
3883                         sp->name, sp);
3884         if (err) {
3885                 DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n",
3886                        sp->dev->name, pci_name(pdev), pdev->irq);
3887                 return err;
3888         }
3889
3890         init_waitqueue_head (&sp->msi_wait);
3891         sp->msi_detected = 0;
3892
3893         saved64 = val64 = readq(&bar0->scheduled_int_ctrl);
3894         val64 |= SCHED_INT_CTRL_ONE_SHOT;
3895         val64 |= SCHED_INT_CTRL_TIMER_EN;
3896         val64 |= SCHED_INT_CTRL_INT2MSI(1);
3897         writeq(val64, &bar0->scheduled_int_ctrl);
3898
3899         wait_event_timeout(sp->msi_wait, sp->msi_detected, HZ/10);
3900
3901         if (!sp->msi_detected) {
3902                 /* MSI(X) test failed, go back to INTx mode */
3903                 DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "
3904                         "using MSI(X) during test\n", sp->dev->name,
3905                         pci_name(pdev));
3906
3907                 err = -EOPNOTSUPP;
3908         }
3909
3910         free_irq(sp->entries[1].vector, sp);
3911
3912         writeq(saved64, &bar0->scheduled_int_ctrl);
3913
3914         return err;
3915 }
3916
3917 static void remove_msix_isr(struct s2io_nic *sp)
3918 {
3919         int i;
3920         u16 msi_control;
3921
3922         for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
3923                 if (sp->s2io_entries[i].in_use ==
3924                         MSIX_REGISTERED_SUCCESS) {
3925                         int vector = sp->entries[i].vector;
3926                         void *arg = sp->s2io_entries[i].arg;
3927                         free_irq(vector, arg);
3928                 }
3929         }
3930
3931         kfree(sp->entries);
3932         kfree(sp->s2io_entries);
3933         sp->entries = NULL;
3934         sp->s2io_entries = NULL;
3935
3936         pci_read_config_word(sp->pdev, 0x42, &msi_control);
3937         msi_control &= 0xFFFE; /* Disable MSI */
3938         pci_write_config_word(sp->pdev, 0x42, msi_control);
3939
3940         pci_disable_msix(sp->pdev);
3941 }
3942
3943 static void remove_inta_isr(struct s2io_nic *sp)
3944 {
3945         struct net_device *dev = sp->dev;
3946
3947         free_irq(sp->pdev->irq, dev);
3948 }
3949
3950 /* ********************************************************* *
3951  * Functions defined below concern the OS part of the driver *
3952  * ********************************************************* */
3953
3954 /**
3955  *  s2io_open - open entry point of the driver
3956  *  @dev : pointer to the device structure.
3957  *  Description:
3958  *  This function is the open entry point of the driver. It mainly calls a
3959  *  function to allocate Rx buffers and inserts them into the buffer
3960  *  descriptors and then enables the Rx part of the NIC.
3961  *  Return value:
3962  *  0 on success and an appropriate (-)ve integer as defined in errno.h
3963  *   file on failure.
3964  */
3965
3966 static int s2io_open(struct net_device *dev)
3967 {
3968         struct s2io_nic *sp = dev->priv;
3969         int err = 0;
3970
3971         /*
3972          * Make sure you have link off by default every time
3973          * Nic is initialized
3974          */
3975         netif_carrier_off(dev);
3976         sp->last_link_state = 0;
3977
3978         if (sp->config.intr_type == MSI_X) {
3979                 int ret = s2io_enable_msi_x(sp);
3980
3981                 if (!ret) {
3982                         ret = s2io_test_msi(sp);
3983                         /* rollback MSI-X, will re-enable during add_isr() */
3984                         remove_msix_isr(sp);
3985                 }
3986                 if (ret) {
3987
3988                         DBG_PRINT(ERR_DBG,
3989                           "%s: MSI-X requested but failed to enable\n",
3990                           dev->name);
3991                         sp->config.intr_type = INTA;
3992                 }
3993         }
3994
3995         /* NAPI doesn't work well with MSI(X) */
3996          if (sp->config.intr_type != INTA) {
3997                 if(sp->config.napi)
3998                         sp->config.napi = 0;
3999         }
4000
4001         /* Initialize H/W and enable interrupts */
4002         err = s2io_card_up(sp);
4003         if (err) {
4004                 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
4005                           dev->name);
4006                 goto hw_init_failed;
4007         }
4008
4009         if (do_s2io_prog_unicast(dev, dev->dev_addr) == FAILURE) {
4010                 DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
4011                 s2io_card_down(sp);
4012                 err = -ENODEV;
4013                 goto hw_init_failed;
4014         }
4015         s2io_start_all_tx_queue(sp);
4016         return 0;
4017
4018 hw_init_failed:
4019         if (sp->config.intr_type == MSI_X) {
4020                 if (sp->entries) {
4021                         kfree(sp->entries);
4022                         sp->mac_control.stats_info->sw_stat.mem_freed
4023                         += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
4024                 }
4025                 if (sp->s2io_entries) {
4026                         kfree(sp->s2io_entries);
4027                         sp->mac_control.stats_info->sw_stat.mem_freed
4028                         += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
4029                 }
4030         }
4031         return err;
4032 }
4033
4034 /**
4035  *  s2io_close -close entry point of the driver
4036  *  @dev : device pointer.
4037  *  Description:
4038  *  This is the stop entry point of the driver. It needs to undo exactly
4039  *  whatever was done by the open entry point,thus it's usually referred to
4040  *  as the close function.Among other things this function mainly stops the
4041  *  Rx side of the NIC and frees all the Rx buffers in the Rx rings.
4042  *  Return value:
4043  *  0 on success and an appropriate (-)ve integer as defined in errno.h
4044  *  file on failure.
4045  */
4046
4047 static int s2io_close(struct net_device *dev)
4048 {
4049         struct s2io_nic *sp = dev->priv;
4050         struct config_param *config = &sp->config;
4051         u64 tmp64;
4052         int offset;
4053
4054         /* Return if the device is already closed               *
4055         *  Can happen when s2io_card_up failed in change_mtu    *
4056         */
4057         if (!is_s2io_card_up(sp))
4058                 return 0;
4059
4060         s2io_stop_all_tx_queue(sp);
4061         /* delete all populated mac entries */
4062         for (offset = 1; offset < config->max_mc_addr; offset++) {
4063                 tmp64 = do_s2io_read_unicast_mc(sp, offset);
4064                 if (tmp64 != S2IO_DISABLE_MAC_ENTRY)
4065                         do_s2io_delete_unicast_mc(sp, tmp64);
4066         }
4067
4068         s2io_card_down(sp);
4069
4070         return 0;
4071 }
4072
4073 /**
4074  *  s2io_xmit - Tx entry point of te driver
4075  *  @skb : the socket buffer containing the Tx data.
4076  *  @dev : device pointer.
4077  *  Description :
4078  *  This function is the Tx entry point of the driver. S2IO NIC supports
4079  *  certain protocol assist features on Tx side, namely  CSO, S/G, LSO.
4080  *  NOTE: when device cant queue the pkt,just the trans_start variable will
4081  *  not be upadted.
4082  *  Return value:
4083  *  0 on success & 1 on failure.
4084  */
4085
4086 static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
4087 {
4088         struct s2io_nic *sp = dev->priv;
4089         u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
4090         register u64 val64;
4091         struct TxD *txdp;
4092         struct TxFIFO_element __iomem *tx_fifo;
4093         unsigned long flags = 0;
4094         u16 vlan_tag = 0;
4095         struct fifo_info *fifo = NULL;
4096         struct mac_info *mac_control;
4097         struct config_param *config;
4098         int do_spin_lock = 1;
4099         int offload_type;
4100         int enable_per_list_interrupt = 0;
4101         struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
4102
4103         mac_control = &sp->mac_control;
4104         config = &sp->config;
4105
4106         DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
4107
4108         if (unlikely(skb->len <= 0)) {
4109                 DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name);
4110                 dev_kfree_skb_any(skb);
4111                 return 0;
4112         }
4113
4114         if (!is_s2io_card_up(sp)) {
4115                 DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
4116                           dev->name);
4117                 dev_kfree_skb(skb);
4118                 return 0;
4119         }
4120
4121         queue = 0;
4122         if (sp->vlgrp && vlan_tx_tag_present(skb))
4123                 vlan_tag = vlan_tx_tag_get(skb);
4124         if (sp->config.tx_steering_type == TX_DEFAULT_STEERING) {
4125                 if (skb->protocol == htons(ETH_P_IP)) {
4126                         struct iphdr *ip;
4127                         struct tcphdr *th;
4128                         ip = ip_hdr(skb);
4129
4130                         if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) {
4131                                 th = (struct tcphdr *)(((unsigned char *)ip) +
4132                                                 ip->ihl*4);
4133
4134                                 if (ip->protocol == IPPROTO_TCP) {
4135                                         queue_len = sp->total_tcp_fifos;
4136                                         queue = (ntohs(th->source) +
4137                                                         ntohs(th->dest)) &
4138                                             sp->fifo_selector[queue_len - 1];
4139                                         if (queue >= queue_len)
4140                                                 queue = queue_len - 1;
4141                                 } else if (ip->protocol == IPPROTO_UDP) {
4142                                         queue_len = sp->total_udp_fifos;
4143                                         queue = (ntohs(th->source) +
4144                                                         ntohs(th->dest)) &
4145                                             sp->fifo_selector[queue_len - 1];
4146                                         if (queue >= queue_len)
4147                                                 queue = queue_len - 1;
4148                                         queue += sp->udp_fifo_idx;
4149                                         if (skb->len > 1024)
4150                                                 enable_per_list_interrupt = 1;
4151                                         do_spin_lock = 0;
4152                                 }
4153                         }
4154                 }
4155         } else if (sp->config.tx_steering_type == TX_PRIORITY_STEERING)
4156                 /* get fifo number based on skb->priority value */
4157                 queue = config->fifo_mapping
4158                                         [skb->priority & (MAX_TX_FIFOS - 1)];
4159         fifo = &mac_control->fifos[queue];
4160
4161         if (do_spin_lock)
4162                 spin_lock_irqsave(&fifo->tx_lock, flags);
4163         else {
4164                 if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags)))
4165                         return NETDEV_TX_LOCKED;
4166         }
4167
4168 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
4169         if (sp->config.multiq) {
4170                 if (__netif_subqueue_stopped(dev, fifo->fifo_no)) {
4171                         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4172                         return NETDEV_TX_BUSY;
4173                 }
4174         } else
4175 #endif
4176         if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) {
4177                 if (netif_queue_stopped(dev)) {
4178                         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4179                         return NETDEV_TX_BUSY;
4180                 }
4181         }
4182
4183         put_off = (u16) fifo->tx_curr_put_info.offset;
4184         get_off = (u16) fifo->tx_curr_get_info.offset;
4185         txdp = (struct TxD *) fifo->list_info[put_off].list_virt_addr;
4186
4187         queue_len = fifo->tx_curr_put_info.fifo_len + 1;
4188         /* Avoid "put" pointer going beyond "get" pointer */
4189         if (txdp->Host_Control ||
4190                    ((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
4191                 DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n");
4192                 s2io_stop_tx_queue(sp, fifo->fifo_no);
4193                 dev_kfree_skb(skb);
4194                 spin_unlock_irqrestore(&fifo->tx_lock, flags);
4195                 return 0;
4196         }
4197
4198         offload_type = s2io_offload_type(skb);
4199         if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
4200                 txdp->Control_1 |= TXD_TCP_LSO_EN;
4201                 txdp->Control_1 |= TXD_TCP_LSO_MSS(s2io_tcp_mss(skb));
4202         }
4203         if (skb->ip_summed == CHECKSUM_PARTIAL) {
4204                 txdp->Control_2 |=
4205                     (TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN |
4206                      TXD_TX_CKO_UDP_EN);
4207         }
4208         txdp->Control_1 |= TXD_GATHER_CODE_FIRST;
4209         txdp->Control_1 |= TXD_LIST_OWN_XENA;
4210         txdp->Control_2 |= TXD_INT_NUMBER(fifo->fifo_no);
4211         if (enable_per_list_interrupt)
4212                 if (put_off & (queue_len >> 5))
4213                         txdp->Control_2 |= TXD_INT_TYPE_PER_LIST;
4214         if (vlan_tag) {
4215                 txdp->Control_2 |= TXD_VLAN_ENABLE;
4216                 txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
4217         }
4218
4219         frg_len = skb->len - skb->data_len;
4220         if (offload_type == SKB_GSO_UDP) {
4221                 int ufo_size;
4222
4223                 ufo_size = s2io_udp_mss(skb);
4224                 ufo_size &= ~7;
4225                 txdp->Control_1 |= TXD_UFO_EN;
4226                 txdp->Control_1 |= TXD_UFO_MSS(ufo_size);
4227                 txdp->Control_1 |= TXD_BUFFER0_SIZE(8);
4228 #ifdef __BIG_ENDIAN
4229                 /* both variants do cpu_to_be64(be32_to_cpu(...)) */
4230                 fifo->ufo_in_band_v[put_off] =
4231                                 (__force u64)skb_shinfo(skb)->ip6_frag_id;
4232 #else
4233                 fifo->ufo_in_band_v[put_off] =
4234                                 (__force u64)skb_shinfo(skb)->ip6_frag_id << 32;
4235 #endif
4236                 txdp->Host_Control = (unsigned long)fifo->ufo_in_band_v;
4237                 txdp->Buffer_Pointer = pci_map_single(sp->pdev,
4238                                         fifo->ufo_in_band_v,
4239                                         sizeof(u64), PCI_DMA_TODEVICE);
4240                 if((txdp->Buffer_Pointer == 0) ||
4241                         (txdp->Buffer_Pointer == DMA_ERROR_CODE))
4242                         goto pci_map_failed;
4243                 txdp++;
4244         }
4245
4246         txdp->Buffer_Pointer = pci_map_single
4247             (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
4248         if((txdp->Buffer_Pointer == 0) ||
4249                 (txdp->Buffer_Pointer == DMA_ERROR_CODE))
4250                 goto pci_map_failed;
4251
4252         txdp->Host_Control = (unsigned long) skb;
4253         txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len);
4254         if (offload_type == SKB_GSO_UDP)
4255                 txdp->Control_1 |= TXD_UFO_EN;
4256
4257         frg_cnt = skb_shinfo(skb)->nr_frags;
4258         /* For fragmented SKB. */
4259         for (i = 0; i < frg_cnt; i++) {
4260                 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
4261                 /* A '0' length fragment will be ignored */
4262                 if (!frag->size)
4263                         continue;
4264                 txdp++;
4265                 txdp->Buffer_Pointer = (u64) pci_map_page
4266                     (sp->pdev, frag->page, frag->page_offset,
4267                      frag->size, PCI_DMA_TODEVICE);
4268                 txdp->Control_1 = TXD_BUFFER0_SIZE(frag->size);
4269                 if (offload_type == SKB_GSO_UDP)
4270                         txdp->Control_1 |= TXD_UFO_EN;
4271         }
4272         txdp->Control_1 |= TXD_GATHER_CODE_LAST;
4273
4274         if (offload_type == SKB_GSO_UDP)
4275                 frg_cnt++; /* as Txd0 was used for inband header */
4276
4277         tx_fifo = mac_control->tx_FIFO_start[queue];
4278         val64 = fifo->list_info[put_off].list_phy_addr;
4279         writeq(val64, &tx_fifo->TxDL_Pointer);
4280
4281         val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST |
4282                  TX_FIFO_LAST_LIST);
4283         if (offload_type)
4284                 val64 |= TX_FIFO_SPECIAL_FUNC;
4285
4286         writeq(val64, &tx_fifo->List_Control);
4287
4288         mmiowb();
4289
4290         put_off++;
4291         if (put_off == fifo->tx_curr_put_info.fifo_len + 1)
4292                 put_off = 0;
4293         fifo->tx_curr_put_info.offset = put_off;
4294
4295         /* Avoid "put" pointer going beyond "get" pointer */
4296         if (((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
4297                 sp->mac_control.stats_info->sw_stat.fifo_full_cnt++;
4298                 DBG_PRINT(TX_DBG,
4299                           "No free TxDs for xmit, Put: 0x%x Get:0x%x\n",
4300                           put_off, get_off);
4301                 s2io_stop_tx_queue(sp, fifo->fifo_no);
4302         }
4303         mac_control->stats_info->sw_stat.mem_allocated += skb->truesize;
4304         dev->trans_start = jiffies;
4305         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4306
4307         if (sp->config.intr_type == MSI_X)
4308                 tx_intr_handler(fifo);
4309
4310         return 0;
4311 pci_map_failed:
4312         stats->pci_map_fail_cnt++;
4313         s2io_stop_tx_queue(sp, fifo->fifo_no);
4314         stats->mem_freed += skb->truesize;
4315         dev_kfree_skb(skb);
4316         spin_unlock_irqrestore(&fifo->tx_lock, flags);
4317         return 0;
4318 }
4319
4320 static void
4321 s2io_alarm_handle(unsigned long data)
4322 {
4323         struct s2io_nic *sp = (struct s2io_nic *)data;
4324         struct net_device *dev = sp->dev;
4325
4326         s2io_handle_errors(dev);
4327         mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
4328 }
4329
4330 static int s2io_chk_rx_buffers(struct ring_info *ring)
4331 {
4332         if (fill_rx_buffers(ring) == -ENOMEM) {
4333                 DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
4334                 DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
4335         }
4336         return 0;
4337 }
4338
4339 static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
4340 {
4341         struct ring_info *ring = (struct ring_info *)dev_id;
4342         struct s2io_nic *sp = ring->nic;
4343
4344         if (!is_s2io_card_up(sp))
4345                 return IRQ_HANDLED;
4346
4347         rx_intr_handler(ring);
4348         s2io_chk_rx_buffers(ring);
4349
4350         return IRQ_HANDLED;
4351 }
4352
4353 static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id)
4354 {
4355         struct fifo_info *fifo = (struct fifo_info *)dev_id;
4356         struct s2io_nic *sp = fifo->nic;
4357
4358         if (!is_s2io_card_up(sp))
4359                 return IRQ_HANDLED;
4360
4361         tx_intr_handler(fifo);
4362         return IRQ_HANDLED;
4363 }
4364 static void s2io_txpic_intr_handle(struct s2io_nic *sp)
4365 {
4366         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4367         u64 val64;
4368
4369         val64 = readq(&bar0->pic_int_status);
4370         if (val64 & PIC_INT_GPIO) {
4371                 val64 = readq(&bar0->gpio_int_reg);
4372                 if ((val64 & GPIO_INT_REG_LINK_DOWN) &&
4373                     (val64 & GPIO_INT_REG_LINK_UP)) {
4374                         /*
4375                          * This is unstable state so clear both up/down
4376                          * interrupt and adapter to re-evaluate the link state.
4377                          */
4378                         val64 |=  GPIO_INT_REG_LINK_DOWN;
4379                         val64 |= GPIO_INT_REG_LINK_UP;
4380                         writeq(val64, &bar0->gpio_int_reg);
4381                         val64 = readq(&bar0->gpio_int_mask);
4382                         val64 &= ~(GPIO_INT_MASK_LINK_UP |
4383                                    GPIO_INT_MASK_LINK_DOWN);
4384                         writeq(val64, &bar0->gpio_int_mask);
4385                 }
4386                 else if (val64 & GPIO_INT_REG_LINK_UP) {
4387                         val64 = readq(&bar0->adapter_status);
4388                                 /* Enable Adapter */
4389                         val64 = readq(&bar0->adapter_control);
4390                         val64 |= ADAPTER_CNTL_EN;
4391                         writeq(val64, &bar0->adapter_control);
4392                         val64 |= ADAPTER_LED_ON;
4393                         writeq(val64, &bar0->adapter_control);
4394                         if (!sp->device_enabled_once)
4395                                 sp->device_enabled_once = 1;
4396
4397                         s2io_link(sp, LINK_UP);
4398                         /*
4399                          * unmask link down interrupt and mask link-up
4400                          * intr
4401                          */
4402                         val64 = readq(&bar0->gpio_int_mask);
4403                         val64 &= ~GPIO_INT_MASK_LINK_DOWN;
4404                         val64 |= GPIO_INT_MASK_LINK_UP;
4405                         writeq(val64, &bar0->gpio_int_mask);
4406
4407                 }else if (val64 & GPIO_INT_REG_LINK_DOWN) {
4408                         val64 = readq(&bar0->adapter_status);
4409                         s2io_link(sp, LINK_DOWN);
4410                         /* Link is down so unmaks link up interrupt */
4411                         val64 = readq(&bar0->gpio_int_mask);
4412                         val64 &= ~GPIO_INT_MASK_LINK_UP;
4413                         val64 |= GPIO_INT_MASK_LINK_DOWN;
4414                         writeq(val64, &bar0->gpio_int_mask);
4415
4416                         /* turn off LED */
4417                         val64 = readq(&bar0->adapter_control);
4418                         val64 = val64 &(~ADAPTER_LED_ON);
4419                         writeq(val64, &bar0->adapter_control);
4420                 }
4421         }
4422         val64 = readq(&bar0->gpio_int_mask);
4423 }
4424
4425 /**
4426  *  do_s2io_chk_alarm_bit - Check for alarm and incrment the counter
4427  *  @value: alarm bits
4428  *  @addr: address value
4429  *  @cnt: counter variable
4430  *  Description: Check for alarm and increment the counter
4431  *  Return Value:
4432  *  1 - if alarm bit set
4433  *  0 - if alarm bit is not set
4434  */
4435 static int do_s2io_chk_alarm_bit(u64 value, void __iomem * addr,
4436                           unsigned long long *cnt)
4437 {
4438         u64 val64;
4439         val64 = readq(addr);
4440         if ( val64 & value ) {
4441                 writeq(val64, addr);
4442                 (*cnt)++;
4443                 return 1;
4444         }
4445         return 0;
4446
4447 }
4448
4449 /**
4450  *  s2io_handle_errors - Xframe error indication handler
4451  *  @nic: device private variable
4452  *  Description: Handle alarms such as loss of link, single or
4453  *  double ECC errors, critical and serious errors.
4454  *  Return Value:
4455  *  NONE
4456  */
4457 static void s2io_handle_errors(void * dev_id)
4458 {
4459         struct net_device *dev = (struct net_device *) dev_id;
4460         struct s2io_nic *sp = dev->priv;
4461         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4462         u64 temp64 = 0,val64=0;
4463         int i = 0;
4464
4465         struct swStat *sw_stat = &sp->mac_control.stats_info->sw_stat;
4466         struct xpakStat *stats = &sp->mac_control.stats_info->xpak_stat;
4467
4468         if (!is_s2io_card_up(sp))
4469                 return;
4470
4471         if (pci_channel_offline(sp->pdev))
4472                 return;
4473
4474         memset(&sw_stat->ring_full_cnt, 0,
4475                 sizeof(sw_stat->ring_full_cnt));
4476
4477         /* Handling the XPAK counters update */
4478         if(stats->xpak_timer_count < 72000) {
4479                 /* waiting for an hour */
4480                 stats->xpak_timer_count++;
4481         } else {
4482                 s2io_updt_xpak_counter(dev);
4483                 /* reset the count to zero */
4484                 stats->xpak_timer_count = 0;
4485         }
4486
4487         /* Handling link status change error Intr */
4488         if (s2io_link_fault_indication(sp) == MAC_RMAC_ERR_TIMER) {
4489                 val64 = readq(&bar0->mac_rmac_err_reg);
4490                 writeq(val64, &bar0->mac_rmac_err_reg);
4491                 if (val64 & RMAC_LINK_STATE_CHANGE_INT)
4492                         schedule_work(&sp->set_link_task);
4493         }
4494
4495         /* In case of a serious error, the device will be Reset. */
4496         if (do_s2io_chk_alarm_bit(SERR_SOURCE_ANY, &bar0->serr_source,
4497                                 &sw_stat->serious_err_cnt))
4498                 goto reset;
4499
4500         /* Check for data parity error */
4501         if (do_s2io_chk_alarm_bit(GPIO_INT_REG_DP_ERR_INT, &bar0->gpio_int_reg,
4502                                 &sw_stat->parity_err_cnt))
4503                 goto reset;
4504
4505         /* Check for ring full counter */
4506         if (sp->device_type == XFRAME_II_DEVICE) {
4507                 val64 = readq(&bar0->ring_bump_counter1);
4508                 for (i=0; i<4; i++) {
4509                         temp64 = ( val64 & vBIT(0xFFFF,(i*16),16));
4510                         temp64 >>= 64 - ((i+1)*16);
4511                         sw_stat->ring_full_cnt[i] += temp64;
4512                 }
4513
4514                 val64 = readq(&bar0->ring_bump_counter2);
4515                 for (i=0; i<4; i++) {
4516                         temp64 = ( val64 & vBIT(0xFFFF,(i*16),16));
4517                         temp64 >>= 64 - ((i+1)*16);
4518                          sw_stat->ring_full_cnt[i+4] += temp64;
4519                 }
4520         }
4521
4522         val64 = readq(&bar0->txdma_int_status);
4523         /*check for pfc_err*/
4524         if (val64 & TXDMA_PFC_INT) {
4525                 if (do_s2io_chk_alarm_bit(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM|
4526                                 PFC_MISC_0_ERR | PFC_MISC_1_ERR|
4527                                 PFC_PCIX_ERR, &bar0->pfc_err_reg,
4528                                 &sw_stat->pfc_err_cnt))
4529                         goto reset;
4530                 do_s2io_chk_alarm_bit(PFC_ECC_SG_ERR, &bar0->pfc_err_reg,
4531                                 &sw_stat->pfc_err_cnt);
4532         }
4533
4534         /*check for tda_err*/
4535         if (val64 & TXDMA_TDA_INT) {
4536                 if(do_s2io_chk_alarm_bit(TDA_Fn_ECC_DB_ERR | TDA_SM0_ERR_ALARM |
4537                                 TDA_SM1_ERR_ALARM, &bar0->tda_err_reg,
4538                                 &sw_stat->tda_err_cnt))
4539                         goto reset;
4540                 do_s2io_chk_alarm_bit(TDA_Fn_ECC_SG_ERR | TDA_PCIX_ERR,
4541                                 &bar0->tda_err_reg, &sw_stat->tda_err_cnt);
4542         }
4543         /*check for pcc_err*/
4544         if (val64 & TXDMA_PCC_INT) {
4545                 if (do_s2io_chk_alarm_bit(PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM
4546                                 | PCC_N_SERR | PCC_6_COF_OV_ERR
4547                                 | PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR
4548                                 | PCC_7_LSO_OV_ERR | PCC_FB_ECC_DB_ERR
4549                                 | PCC_TXB_ECC_DB_ERR, &bar0->pcc_err_reg,
4550                                 &sw_stat->pcc_err_cnt))
4551                         goto reset;
4552                 do_s2io_chk_alarm_bit(PCC_FB_ECC_SG_ERR | PCC_TXB_ECC_SG_ERR,
4553                                 &bar0->pcc_err_reg, &sw_stat->pcc_err_cnt);
4554         }
4555
4556         /*check for tti_err*/
4557         if (val64 & TXDMA_TTI_INT) {
4558                 if (do_s2io_chk_alarm_bit(TTI_SM_ERR_ALARM, &bar0->tti_err_reg,
4559                                 &sw_stat->tti_err_cnt))
4560                         goto reset;
4561                 do_s2io_chk_alarm_bit(TTI_ECC_SG_ERR | TTI_ECC_DB_ERR,
4562                                 &bar0->tti_err_reg, &sw_stat->tti_err_cnt);
4563         }
4564
4565         /*check for lso_err*/
4566         if (val64 & TXDMA_LSO_INT) {
4567                 if (do_s2io_chk_alarm_bit(LSO6_ABORT | LSO7_ABORT
4568                                 | LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM,
4569                                 &bar0->lso_err_reg, &sw_stat->lso_err_cnt))
4570                         goto reset;
4571                 do_s2io_chk_alarm_bit(LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
4572                                 &bar0->lso_err_reg, &sw_stat->lso_err_cnt);
4573         }
4574
4575         /*check for tpa_err*/
4576         if (val64 & TXDMA_TPA_INT) {
4577                 if (do_s2io_chk_alarm_bit(TPA_SM_ERR_ALARM, &bar0->tpa_err_reg,
4578                         &sw_stat->tpa_err_cnt))
4579                         goto reset;
4580                 do_s2io_chk_alarm_bit(TPA_TX_FRM_DROP, &bar0->tpa_err_reg,
4581                         &sw_stat->tpa_err_cnt);
4582         }
4583
4584         /*check for sm_err*/
4585         if (val64 & TXDMA_SM_INT) {
4586                 if (do_s2io_chk_alarm_bit(SM_SM_ERR_ALARM, &bar0->sm_err_reg,
4587                         &sw_stat->sm_err_cnt))
4588                         goto reset;
4589         }
4590
4591         val64 = readq(&bar0->mac_int_status);
4592         if (val64 & MAC_INT_STATUS_TMAC_INT) {
4593                 if (do_s2io_chk_alarm_bit(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR,
4594                                 &bar0->mac_tmac_err_reg,
4595                                 &sw_stat->mac_tmac_err_cnt))
4596                         goto reset;
4597                 do_s2io_chk_alarm_bit(TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR
4598                                 | TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR,
4599                                 &bar0->mac_tmac_err_reg,
4600                                 &sw_stat->mac_tmac_err_cnt);
4601         }
4602
4603         val64 = readq(&bar0->xgxs_int_status);
4604         if (val64 & XGXS_INT_STATUS_TXGXS) {
4605                 if (do_s2io_chk_alarm_bit(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR,
4606                                 &bar0->xgxs_txgxs_err_reg,
4607                                 &sw_stat->xgxs_txgxs_err_cnt))
4608                         goto reset;
4609                 do_s2io_chk_alarm_bit(TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
4610                                 &bar0->xgxs_txgxs_err_reg,
4611                                 &sw_stat->xgxs_txgxs_err_cnt);
4612         }
4613
4614         val64 = readq(&bar0->rxdma_int_status);
4615         if (val64 & RXDMA_INT_RC_INT_M) {
4616                 if (do_s2io_chk_alarm_bit(RC_PRCn_ECC_DB_ERR | RC_FTC_ECC_DB_ERR
4617                                 | RC_PRCn_SM_ERR_ALARM |RC_FTC_SM_ERR_ALARM,
4618                                 &bar0->rc_err_reg, &sw_stat->rc_err_cnt))
4619                         goto reset;
4620                 do_s2io_chk_alarm_bit(RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR
4621                                 | RC_RDA_FAIL_WR_Rn, &bar0->rc_err_reg,
4622                                 &sw_stat->rc_err_cnt);
4623                 if (do_s2io_chk_alarm_bit(PRC_PCI_AB_RD_Rn | PRC_PCI_AB_WR_Rn
4624                                 | PRC_PCI_AB_F_WR_Rn, &bar0->prc_pcix_err_reg,
4625                                 &sw_stat->prc_pcix_err_cnt))
4626                         goto reset;
4627                 do_s2io_chk_alarm_bit(PRC_PCI_DP_RD_Rn | PRC_PCI_DP_WR_Rn
4628                                 | PRC_PCI_DP_F_WR_Rn, &bar0->prc_pcix_err_reg,
4629                                 &sw_stat->prc_pcix_err_cnt);
4630         }
4631
4632         if (val64 & RXDMA_INT_RPA_INT_M) {
4633                 if (do_s2io_chk_alarm_bit(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR,
4634                                 &bar0->rpa_err_reg, &sw_stat->rpa_err_cnt))
4635                         goto reset;
4636                 do_s2io_chk_alarm_bit(RPA_ECC_SG_ERR | RPA_ECC_DB_ERR,
4637                                 &bar0->rpa_err_reg, &sw_stat->rpa_err_cnt);
4638         }
4639
4640         if (val64 & RXDMA_INT_RDA_INT_M) {
4641                 if (do_s2io_chk_alarm_bit(RDA_RXDn_ECC_DB_ERR
4642                                 | RDA_FRM_ECC_DB_N_AERR | RDA_SM1_ERR_ALARM
4643                                 | RDA_SM0_ERR_ALARM | RDA_RXD_ECC_DB_SERR,
4644                                 &bar0->rda_err_reg, &sw_stat->rda_err_cnt))
4645                         goto reset;
4646                 do_s2io_chk_alarm_bit(RDA_RXDn_ECC_SG_ERR | RDA_FRM_ECC_SG_ERR
4647                                 | RDA_MISC_ERR | RDA_PCIX_ERR,
4648                                 &bar0->rda_err_reg, &sw_stat->rda_err_cnt);
4649         }
4650
4651         if (val64 & RXDMA_INT_RTI_INT_M) {
4652                 if (do_s2io_chk_alarm_bit(RTI_SM_ERR_ALARM, &bar0->rti_err_reg,
4653                                 &sw_stat->rti_err_cnt))
4654                         goto reset;
4655                 do_s2io_chk_alarm_bit(RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
4656                                 &bar0->rti_err_reg, &sw_stat->rti_err_cnt);
4657         }
4658
4659         val64 = readq(&bar0->mac_int_status);
4660         if (val64 & MAC_INT_STATUS_RMAC_INT) {
4661                 if (do_s2io_chk_alarm_bit(RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR,
4662                                 &bar0->mac_rmac_err_reg,
4663                                 &sw_stat->mac_rmac_err_cnt))
4664                         goto reset;
4665                 do_s2io_chk_alarm_bit(RMAC_UNUSED_INT|RMAC_SINGLE_ECC_ERR|
4666                                 RMAC_DOUBLE_ECC_ERR, &bar0->mac_rmac_err_reg,
4667                                 &sw_stat->mac_rmac_err_cnt);
4668         }
4669
4670         val64 = readq(&bar0->xgxs_int_status);
4671         if (val64 & XGXS_INT_STATUS_RXGXS) {
4672                 if (do_s2io_chk_alarm_bit(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR,
4673                                 &bar0->xgxs_rxgxs_err_reg,
4674                                 &sw_stat->xgxs_rxgxs_err_cnt))
4675                         goto reset;
4676         }
4677
4678         val64 = readq(&bar0->mc_int_status);
4679         if(val64 & MC_INT_STATUS_MC_INT) {
4680                 if (do_s2io_chk_alarm_bit(MC_ERR_REG_SM_ERR, &bar0->mc_err_reg,
4681                                 &sw_stat->mc_err_cnt))
4682                         goto reset;
4683
4684                 /* Handling Ecc errors */
4685                 if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) {
4686                         writeq(val64, &bar0->mc_err_reg);
4687                         if (val64 & MC_ERR_REG_ECC_ALL_DBL) {
4688                                 sw_stat->double_ecc_errs++;
4689                                 if (sp->device_type != XFRAME_II_DEVICE) {
4690                                         /*
4691                                          * Reset XframeI only if critical error
4692                                          */
4693                                         if (val64 &
4694                                                 (MC_ERR_REG_MIRI_ECC_DB_ERR_0 |
4695                                                 MC_ERR_REG_MIRI_ECC_DB_ERR_1))
4696                                                                 goto reset;
4697                                         }
4698                         } else
4699                                 sw_stat->single_ecc_errs++;
4700                 }
4701         }
4702         return;
4703
4704 reset:
4705         s2io_stop_all_tx_queue(sp);
4706         schedule_work(&sp->rst_timer_task);
4707         sw_stat->soft_reset_cnt++;
4708         return;
4709 }
4710
4711 /**
4712  *  s2io_isr - ISR handler of the device .
4713  *  @irq: the irq of the device.
4714  *  @dev_id: a void pointer to the dev structure of the NIC.
4715  *  Description:  This function is the ISR handler of the device. It
4716  *  identifies the reason for the interrupt and calls the relevant
4717  *  service routines. As a contongency measure, this ISR allocates the
4718  *  recv buffers, if their numbers are below the panic value which is
4719  *  presently set to 25% of the original number of rcv buffers allocated.
4720  *  Return value:
4721  *   IRQ_HANDLED: will be returned if IRQ was handled by this routine
4722  *   IRQ_NONE: will be returned if interrupt is not from our device
4723  */
4724 static irqreturn_t s2io_isr(int irq, void *dev_id)
4725 {
4726         struct net_device *dev = (struct net_device *) dev_id;
4727         struct s2io_nic *sp = dev->priv;
4728         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4729         int i;
4730         u64 reason = 0;
4731         struct mac_info *mac_control;
4732         struct config_param *config;
4733
4734         /* Pretend we handled any irq's from a disconnected card */
4735         if (pci_channel_offline(sp->pdev))
4736                 return IRQ_NONE;
4737
4738         if (!is_s2io_card_up(sp))
4739                 return IRQ_NONE;
4740
4741         mac_control = &sp->mac_control;
4742         config = &sp->config;
4743
4744         /*
4745          * Identify the cause for interrupt and call the appropriate
4746          * interrupt handler. Causes for the interrupt could be;
4747          * 1. Rx of packet.
4748          * 2. Tx complete.
4749          * 3. Link down.
4750          */
4751         reason = readq(&bar0->general_int_status);
4752
4753         if (unlikely(reason == S2IO_MINUS_ONE) ) {
4754                 /* Nothing much can be done. Get out */
4755                 return IRQ_HANDLED;
4756         }
4757
4758         if (reason & (GEN_INTR_RXTRAFFIC |
4759                 GEN_INTR_TXTRAFFIC | GEN_INTR_TXPIC))
4760         {
4761                 writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
4762
4763                 if (config->napi) {
4764                         if (reason & GEN_INTR_RXTRAFFIC) {
4765                                 if (likely(netif_rx_schedule_prep(dev,
4766                                                         &sp->napi))) {
4767                                         __netif_rx_schedule(dev, &sp->napi);
4768                                         writeq(S2IO_MINUS_ONE,
4769                                                &bar0->rx_traffic_mask);
4770                                 } else
4771                                         writeq(S2IO_MINUS_ONE,
4772                                                &bar0->rx_traffic_int);
4773                         }
4774                 } else {
4775                         /*
4776                          * rx_traffic_int reg is an R1 register, writing all 1's
4777                          * will ensure that the actual interrupt causing bit
4778                          * get's cleared and hence a read can be avoided.
4779                          */
4780                         if (reason & GEN_INTR_RXTRAFFIC)
4781                                 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
4782
4783                         for (i = 0; i < config->rx_ring_num; i++)
4784                                 rx_intr_handler(&mac_control->rings[i]);
4785                 }
4786
4787                 /*
4788                  * tx_traffic_int reg is an R1 register, writing all 1's
4789                  * will ensure that the actual interrupt causing bit get's
4790                  * cleared and hence a read can be avoided.
4791                  */
4792                 if (reason & GEN_INTR_TXTRAFFIC)
4793                         writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
4794
4795                 for (i = 0; i < config->tx_fifo_num; i++)
4796                         tx_intr_handler(&mac_control->fifos[i]);
4797
4798                 if (reason & GEN_INTR_TXPIC)
4799                         s2io_txpic_intr_handle(sp);
4800
4801                 /*
4802                  * Reallocate the buffers from the interrupt handler itself.
4803                  */
4804                 if (!config->napi) {
4805                         for (i = 0; i < config->rx_ring_num; i++)
4806                                 s2io_chk_rx_buffers(&mac_control->rings[i]);
4807                 }
4808                 writeq(sp->general_int_mask, &bar0->general_int_mask);
4809                 readl(&bar0->general_int_status);
4810
4811                 return IRQ_HANDLED;
4812
4813         }
4814         else if (!reason) {
4815                 /* The interrupt was not raised by us */
4816                 return IRQ_NONE;
4817         }
4818
4819         return IRQ_HANDLED;
4820 }
4821
4822 /**
4823  * s2io_updt_stats -
4824  */
4825 static void s2io_updt_stats(struct s2io_nic *sp)
4826 {
4827         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4828         u64 val64;
4829         int cnt = 0;
4830
4831         if (is_s2io_card_up(sp)) {
4832                 /* Apprx 30us on a 133 MHz bus */
4833                 val64 = SET_UPDT_CLICKS(10) |
4834                         STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN;
4835                 writeq(val64, &bar0->stat_cfg);
4836                 do {
4837                         udelay(100);
4838                         val64 = readq(&bar0->stat_cfg);
4839                         if (!(val64 & s2BIT(0)))
4840                                 break;
4841                         cnt++;
4842                         if (cnt == 5)
4843                                 break; /* Updt failed */
4844                 } while(1);
4845         }
4846 }
4847
4848 /**
4849  *  s2io_get_stats - Updates the device statistics structure.
4850  *  @dev : pointer to the device structure.
4851  *  Description:
4852  *  This function updates the device statistics structure in the s2io_nic
4853  *  structure and returns a pointer to the same.
4854  *  Return value:
4855  *  pointer to the updated net_device_stats structure.
4856  */
4857
4858 static struct net_device_stats *s2io_get_stats(struct net_device *dev)
4859 {
4860         struct s2io_nic *sp = dev->priv;
4861         struct mac_info *mac_control;
4862         struct config_param *config;
4863         int i;
4864
4865
4866         mac_control = &sp->mac_control;
4867         config = &sp->config;
4868
4869         /* Configure Stats for immediate updt */
4870         s2io_updt_stats(sp);
4871
4872         sp->stats.tx_packets =
4873                 le32_to_cpu(mac_control->stats_info->tmac_frms);
4874         sp->stats.tx_errors =
4875                 le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
4876         sp->stats.rx_errors =
4877                 le64_to_cpu(mac_control->stats_info->rmac_drop_frms);
4878         sp->stats.multicast =
4879                 le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
4880         sp->stats.rx_length_errors =
4881                 le64_to_cpu(mac_control->stats_info->rmac_long_frms);
4882
4883         /* collect per-ring rx_packets and rx_bytes */
4884         sp->stats.rx_packets = sp->stats.rx_bytes = 0;
4885         for (i = 0; i < config->rx_ring_num; i++) {
4886                 sp->stats.rx_packets += mac_control->rings[i].rx_packets;
4887                 sp->stats.rx_bytes += mac_control->rings[i].rx_bytes;
4888         }
4889
4890         return (&sp->stats);
4891 }
4892
4893 /**
4894  *  s2io_set_multicast - entry point for multicast address enable/disable.
4895  *  @dev : pointer to the device structure
4896  *  Description:
4897  *  This function is a driver entry point which gets called by the kernel
4898  *  whenever multicast addresses must be enabled/disabled. This also gets
4899  *  called to set/reset promiscuous mode. Depending on the deivce flag, we
4900  *  determine, if multicast address must be enabled or if promiscuous mode
4901  *  is to be disabled etc.
4902  *  Return value:
4903  *  void.
4904  */
4905
4906 static void s2io_set_multicast(struct net_device *dev)
4907 {
4908         int i, j, prev_cnt;
4909         struct dev_mc_list *mclist;
4910         struct s2io_nic *sp = dev->priv;
4911         struct XENA_dev_config __iomem *bar0 = sp->bar0;
4912         u64 val64 = 0, multi_mac = 0x010203040506ULL, mask =
4913             0xfeffffffffffULL;
4914         u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, mac_addr = 0;
4915         void __iomem *add;
4916         struct config_param *config = &sp->config;
4917
4918         if ((dev->flags & IFF_ALLMULTI) && (!sp->m_cast_flg)) {
4919                 /*  Enable all Multicast addresses */
4920                 writeq(RMAC_ADDR_DATA0_MEM_ADDR(multi_mac),
4921                        &bar0->rmac_addr_data0_mem);
4922                 writeq(RMAC_ADDR_DATA1_MEM_MASK(mask),
4923                        &bar0->rmac_addr_data1_mem);
4924                 val64 = RMAC_ADDR_CMD_MEM_WE |
4925                     RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4926                     RMAC_ADDR_CMD_MEM_OFFSET(config->max_mc_addr - 1);
4927                 writeq(val64, &bar0->rmac_addr_cmd_mem);
4928                 /* Wait till command completes */
4929                 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
4930                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
4931                                         S2IO_BIT_RESET);
4932
4933                 sp->m_cast_flg = 1;
4934                 sp->all_multi_pos = config->max_mc_addr - 1;
4935         } else if ((dev->flags & IFF_ALLMULTI) && (sp->m_cast_flg)) {
4936                 /*  Disable all Multicast addresses */
4937                 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
4938                        &bar0->rmac_addr_data0_mem);
4939                 writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0),
4940                        &bar0->rmac_addr_data1_mem);
4941                 val64 = RMAC_ADDR_CMD_MEM_WE |
4942                     RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4943                     RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos);
4944                 writeq(val64, &bar0->rmac_addr_cmd_mem);
4945                 /* Wait till command completes */
4946                 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
4947                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
4948                                         S2IO_BIT_RESET);
4949
4950                 sp->m_cast_flg = 0;
4951                 sp->all_multi_pos = 0;
4952         }
4953
4954         if ((dev->flags & IFF_PROMISC) && (!sp->promisc_flg)) {
4955                 /*  Put the NIC into promiscuous mode */
4956                 add = &bar0->mac_cfg;
4957                 val64 = readq(&bar0->mac_cfg);
4958                 val64 |= MAC_CFG_RMAC_PROM_ENABLE;
4959
4960                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
4961                 writel((u32) val64, add);
4962                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
4963                 writel((u32) (val64 >> 32), (add + 4));
4964
4965                 if (vlan_tag_strip != 1) {
4966                         val64 = readq(&bar0->rx_pa_cfg);
4967                         val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
4968                         writeq(val64, &bar0->rx_pa_cfg);
4969                         vlan_strip_flag = 0;
4970                 }
4971
4972                 val64 = readq(&bar0->mac_cfg);
4973                 sp->promisc_flg = 1;
4974                 DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n",
4975                           dev->name);
4976         } else if (!(dev->flags & IFF_PROMISC) && (sp->promisc_flg)) {
4977                 /*  Remove the NIC from promiscuous mode */
4978                 add = &bar0->mac_cfg;
4979                 val64 = readq(&bar0->mac_cfg);
4980                 val64 &= ~MAC_CFG_RMAC_PROM_ENABLE;
4981
4982                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
4983                 writel((u32) val64, add);
4984                 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
4985                 writel((u32) (val64 >> 32), (add + 4));
4986
4987                 if (vlan_tag_strip != 0) {
4988                         val64 = readq(&bar0->rx_pa_cfg);
4989                         val64 |= RX_PA_CFG_STRIP_VLAN_TAG;
4990                         writeq(val64, &bar0->rx_pa_cfg);
4991                         vlan_strip_flag = 1;
4992                 }
4993
4994                 val64 = readq(&bar0->mac_cfg);
4995                 sp->promisc_flg = 0;
4996                 DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n",
4997                           dev->name);
4998         }
4999
5000         /*  Update individual M_CAST address list */
5001         if ((!sp->m_cast_flg) && dev->mc_count) {
5002                 if (dev->mc_count >
5003                     (config->max_mc_addr - config->max_mac_addr)) {
5004                         DBG_PRINT(ERR_DBG, "%s: No more Rx filters ",
5005                                   dev->name);
5006                         DBG_PRINT(ERR_DBG, "can be added, please enable ");
5007                         DBG_PRINT(ERR_DBG, "ALL_MULTI instead\n");
5008                         return;
5009                 }
5010
5011                 prev_cnt = sp->mc_addr_count;
5012                 sp->mc_addr_count = dev->mc_count;
5013
5014                 /* Clear out the previous list of Mc in the H/W. */
5015                 for (i = 0; i < prev_cnt; i++) {
5016                         writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
5017                                &bar0->rmac_addr_data0_mem);
5018                         writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
5019                                 &bar0->rmac_addr_data1_mem);
5020                         val64 = RMAC_ADDR_CMD_MEM_WE |
5021                             RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5022                             RMAC_ADDR_CMD_MEM_OFFSET
5023                             (config->mc_start_offset + i);
5024                         writeq(val64, &bar0->rmac_addr_cmd_mem);
5025
5026                         /* Wait for command completes */
5027                         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5028                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5029                                         S2IO_BIT_RESET)) {
5030                                 DBG_PRINT(ERR_DBG, "%s: Adding ",
5031                                           dev->name);
5032                                 DBG_PRINT(ERR_DBG, "Multicasts failed\n");
5033                                 return;
5034                         }
5035                 }
5036
5037                 /* Create the new Rx filter list and update the same in H/W. */
5038                 for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
5039                      i++, mclist = mclist->next) {
5040                         memcpy(sp->usr_addrs[i].addr, mclist->dmi_addr,
5041                                ETH_ALEN);
5042                         mac_addr = 0;
5043                         for (j = 0; j < ETH_ALEN; j++) {
5044                                 mac_addr |= mclist->dmi_addr[j];
5045                                 mac_addr <<= 8;
5046                         }
5047                         mac_addr >>= 8;
5048                         writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
5049                                &bar0->rmac_addr_data0_mem);
5050                         writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
5051                                 &bar0->rmac_addr_data1_mem);
5052                         val64 = RMAC_ADDR_CMD_MEM_WE |
5053                             RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5054                             RMAC_ADDR_CMD_MEM_OFFSET
5055                             (i + config->mc_start_offset);
5056                         writeq(val64, &bar0->rmac_addr_cmd_mem);
5057
5058                         /* Wait for command completes */
5059                         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5060                                         RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5061                                         S2IO_BIT_RESET)) {
5062                                 DBG_PRINT(ERR_DBG, "%s: Adding ",
5063                                           dev->name);
5064                                 DBG_PRINT(ERR_DBG, "Multicasts failed\n");
5065                                 return;
5066                         }
5067                 }
5068         }
5069 }
5070
5071 /* read from CAM unicast & multicast addresses and store it in
5072  * def_mac_addr structure
5073  */
5074 void do_s2io_store_unicast_mc(struct s2io_nic *sp)
5075 {
5076         int offset;
5077         u64 mac_addr = 0x0;
5078         struct config_param *config = &sp->config;
5079
5080         /* store unicast & multicast mac addresses */
5081         for (offset = 0; offset < config->max_mc_addr; offset++) {
5082                 mac_addr = do_s2io_read_unicast_mc(sp, offset);
5083                 /* if read fails disable the entry */
5084                 if (mac_addr == FAILURE)
5085                         mac_addr = S2IO_DISABLE_MAC_ENTRY;
5086                 do_s2io_copy_mac_addr(sp, offset, mac_addr);
5087         }
5088 }
5089
5090 /* restore unicast & multicast MAC to CAM from def_mac_addr structure */
5091 static void do_s2io_restore_unicast_mc(struct s2io_nic *sp)
5092 {
5093         int offset;
5094         struct config_param *config = &sp->config;
5095         /* restore unicast mac address */
5096         for (offset = 0; offset < config->max_mac_addr; offset++)
5097                 do_s2io_prog_unicast(sp->dev,
5098                         sp->def_mac_addr[offset].mac_addr);
5099
5100         /* restore multicast mac address */
5101         for (offset = config->mc_start_offset;
5102                 offset < config->max_mc_addr; offset++)
5103                 do_s2io_add_mc(sp, sp->def_mac_addr[offset].mac_addr);
5104 }
5105
5106 /* add a multicast MAC address to CAM */
5107 static int do_s2io_add_mc(struct s2io_nic *sp, u8 *addr)
5108 {
5109         int i;
5110         u64 mac_addr = 0;
5111         struct config_param *config = &sp->config;
5112
5113         for (i = 0; i < ETH_ALEN; i++) {
5114                 mac_addr <<= 8;
5115                 mac_addr |= addr[i];
5116         }
5117         if ((0ULL == mac_addr) || (mac_addr == S2IO_DISABLE_MAC_ENTRY))
5118                 return SUCCESS;
5119
5120         /* check if the multicast mac already preset in CAM */
5121         for (i = config->mc_start_offset; i < config->max_mc_addr; i++) {
5122                 u64 tmp64;
5123                 tmp64 = do_s2io_read_unicast_mc(sp, i);
5124                 if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
5125                         break;
5126
5127                 if (tmp64 == mac_addr)
5128                         return SUCCESS;
5129         }
5130         if (i == config->max_mc_addr) {
5131                 DBG_PRINT(ERR_DBG,
5132                         "CAM full no space left for multicast MAC\n");
5133                 return FAILURE;
5134         }
5135         /* Update the internal structure with this new mac address */
5136         do_s2io_copy_mac_addr(sp, i, mac_addr);
5137
5138         return (do_s2io_add_mac(sp, mac_addr, i));
5139 }
5140
5141 /* add MAC address to CAM */
5142 static int do_s2io_add_mac(struct s2io_nic *sp, u64 addr, int off)
5143 {
5144         u64 val64;
5145         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5146
5147         writeq(RMAC_ADDR_DATA0_MEM_ADDR(addr),
5148                 &bar0->rmac_addr_data0_mem);
5149
5150         val64 =
5151                 RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5152                 RMAC_ADDR_CMD_MEM_OFFSET(off);
5153         writeq(val64, &bar0->rmac_addr_cmd_mem);
5154
5155         /* Wait till command completes */
5156         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5157                 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5158                 S2IO_BIT_RESET)) {
5159                 DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n");
5160                 return FAILURE;
5161         }
5162         return SUCCESS;
5163 }
5164 /* deletes a specified unicast/multicast mac entry from CAM */
5165 static int do_s2io_delete_unicast_mc(struct s2io_nic *sp, u64 addr)
5166 {
5167         int offset;
5168         u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, tmp64;
5169         struct config_param *config = &sp->config;
5170
5171         for (offset = 1;
5172                 offset < config->max_mc_addr; offset++) {
5173                 tmp64 = do_s2io_read_unicast_mc(sp, offset);
5174                 if (tmp64 == addr) {
5175                         /* disable the entry by writing  0xffffffffffffULL */
5176                         if (do_s2io_add_mac(sp, dis_addr, offset) ==  FAILURE)
5177                                 return FAILURE;
5178                         /* store the new mac list from CAM */
5179                         do_s2io_store_unicast_mc(sp);
5180                         return SUCCESS;
5181                 }
5182         }
5183         DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",
5184                         (unsigned long long)addr);
5185         return FAILURE;
5186 }
5187
5188 /* read mac entries from CAM */
5189 static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset)
5190 {
5191         u64 tmp64 = 0xffffffffffff0000ULL, val64;
5192         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5193
5194         /* read mac addr */
5195         val64 =
5196                 RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5197                 RMAC_ADDR_CMD_MEM_OFFSET(offset);
5198         writeq(val64, &bar0->rmac_addr_cmd_mem);
5199
5200         /* Wait till command completes */
5201         if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5202                 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5203                 S2IO_BIT_RESET)) {
5204                 DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n");
5205                 return FAILURE;
5206         }
5207         tmp64 = readq(&bar0->rmac_addr_data0_mem);
5208         return (tmp64 >> 16);
5209 }
5210
5211 /**
5212  * s2io_set_mac_addr driver entry point
5213  */
5214
5215 static int s2io_set_mac_addr(struct net_device *dev, void *p)
5216 {
5217         struct sockaddr *addr = p;
5218
5219         if (!is_valid_ether_addr(addr->sa_data))
5220                 return -EINVAL;
5221
5222         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
5223
5224         /* store the MAC address in CAM */
5225         return (do_s2io_prog_unicast(dev, dev->dev_addr));
5226 }
5227 /**
5228  *  do_s2io_prog_unicast - Programs the Xframe mac address
5229  *  @dev : pointer to the device structure.
5230  *  @addr: a uchar pointer to the new mac address which is to be set.
5231  *  Description : This procedure will program the Xframe to receive
5232  *  frames with new Mac Address
5233  *  Return value: SUCCESS on success and an appropriate (-)ve integer
5234  *  as defined in errno.h file on failure.
5235  */
5236
5237 static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr)
5238 {
5239         struct s2io_nic *sp = dev->priv;
5240         register u64 mac_addr = 0, perm_addr = 0;
5241         int i;
5242         u64 tmp64;
5243         struct config_param *config = &sp->config;
5244
5245         /*
5246         * Set the new MAC address as the new unicast filter and reflect this
5247         * change on the device address registered with the OS. It will be
5248         * at offset 0.
5249         */
5250         for (i = 0; i < ETH_ALEN; i++) {
5251                 mac_addr <<= 8;
5252                 mac_addr |= addr[i];
5253                 perm_addr <<= 8;
5254                 perm_addr |= sp->def_mac_addr[0].mac_addr[i];
5255         }
5256
5257         /* check if the dev_addr is different than perm_addr */
5258         if (mac_addr == perm_addr)
5259                 return SUCCESS;
5260
5261         /* check if the mac already preset in CAM */
5262         for (i = 1; i < config->max_mac_addr; i++) {
5263                 tmp64 = do_s2io_read_unicast_mc(sp, i);
5264                 if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
5265                         break;
5266
5267                 if (tmp64 == mac_addr) {
5268                         DBG_PRINT(INFO_DBG,
5269                         "MAC addr:0x%llx already present in CAM\n",
5270                         (unsigned long long)mac_addr);
5271                         return SUCCESS;
5272                 }
5273         }
5274         if (i == config->max_mac_addr) {
5275                 DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");
5276                 return FAILURE;
5277         }
5278         /* Update the internal structure with this new mac address */
5279         do_s2io_copy_mac_addr(sp, i, mac_addr);
5280         return (do_s2io_add_mac(sp, mac_addr, i));
5281 }
5282
5283 /**
5284  * s2io_ethtool_sset - Sets different link parameters.
5285  * @sp : private member of the device structure, which is a pointer to the  * s2io_nic structure.
5286  * @info: pointer to the structure with parameters given by ethtool to set
5287  * link information.
5288  * Description:
5289  * The function sets different link parameters provided by the user onto
5290  * the NIC.
5291  * Return value:
5292  * 0 on success.
5293 */
5294
5295 static int s2io_ethtool_sset(struct net_device *dev,
5296                              struct ethtool_cmd *info)
5297 {
5298         struct s2io_nic *sp = dev->priv;
5299         if ((info->autoneg == AUTONEG_ENABLE) ||
5300             (info->speed != SPEED_10000) || (info->duplex != DUPLEX_FULL))
5301                 return -EINVAL;
5302         else {
5303                 s2io_close(sp->dev);
5304                 s2io_open(sp->dev);
5305         }
5306
5307         return 0;
5308 }
5309
5310 /**
5311  * s2io_ethtol_gset - Return link specific information.
5312  * @sp : private member of the device structure, pointer to the
5313  *      s2io_nic structure.
5314  * @info : pointer to the structure with parameters given by ethtool
5315  * to return link information.
5316  * Description:
5317  * Returns link specific information like speed, duplex etc.. to ethtool.
5318  * Return value :
5319  * return 0 on success.
5320  */
5321
5322 static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
5323 {
5324         struct s2io_nic *sp = dev->priv;
5325         info->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
5326         info->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
5327         info->port = PORT_FIBRE;
5328
5329         /* info->transceiver */
5330         info->transceiver = XCVR_EXTERNAL;
5331
5332         if (netif_carrier_ok(sp->dev)) {
5333                 info->speed = 10000;
5334                 info->duplex = DUPLEX_FULL;
5335         } else {
5336                 info->speed = -1;
5337                 info->duplex = -1;
5338         }
5339
5340         info->autoneg = AUTONEG_DISABLE;
5341         return 0;
5342 }
5343
5344 /**
5345  * s2io_ethtool_gdrvinfo - Returns driver specific information.
5346  * @sp : private member of the device structure, which is a pointer to the
5347  * s2io_nic structure.
5348  * @info : pointer to the structure with parameters given by ethtool to
5349  * return driver information.
5350  * Description:
5351  * Returns driver specefic information like name, version etc.. to ethtool.
5352  * Return value:
5353  *  void
5354  */
5355
5356 static void s2io_ethtool_gdrvinfo(struct net_device *dev,
5357                                   struct ethtool_drvinfo *info)
5358 {
5359         struct s2io_nic *sp = dev->priv;
5360
5361         strncpy(info->driver, s2io_driver_name, sizeof(info->driver));
5362         strncpy(info->version, s2io_driver_version, sizeof(info->version));
5363         strncpy(info->fw_version, "", sizeof(info->fw_version));
5364         strncpy(info->bus_info, pci_name(sp->pdev), sizeof(info->bus_info));
5365         info->regdump_len = XENA_REG_SPACE;
5366         info->eedump_len = XENA_EEPROM_SPACE;
5367 }
5368
5369 /**
5370  *  s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer.
5371  *  @sp: private member of the device structure, which is a pointer to the
5372  *  s2io_nic structure.
5373  *  @regs : pointer to the structure with parameters given by ethtool for
5374  *  dumping the registers.
5375  *  @reg_space: The input argumnet into which all the registers are dumped.
5376  *  Description:
5377  *  Dumps the entire register space of xFrame NIC into the user given
5378  *  buffer area.
5379  * Return value :
5380  * void .
5381 */
5382
5383 static void s2io_ethtool_gregs(struct net_device *dev,
5384                                struct ethtool_regs *regs, void *space)
5385 {
5386         int i;
5387         u64 reg;
5388         u8 *reg_space = (u8 *) space;
5389         struct s2io_nic *sp = dev->priv;
5390
5391         regs->len = XENA_REG_SPACE;
5392         regs->version = sp->pdev->subsystem_device;
5393
5394         for (i = 0; i < regs->len; i += 8) {
5395                 reg = readq(sp->bar0 + i);
5396                 memcpy((reg_space + i), &reg, 8);
5397         }
5398 }
5399
5400 /**
5401  *  s2io_phy_id  - timer function that alternates adapter LED.
5402  *  @data : address of the private member of the device structure, which
5403  *  is a pointer to the s2io_nic structure, provided as an u32.
5404  * Description: This is actually the timer function that alternates the
5405  * adapter LED bit of the adapter control bit to set/reset every time on
5406  * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
5407  *  once every second.
5408 */
5409 static void s2io_phy_id(unsigned long data)
5410 {
5411         struct s2io_nic *sp = (struct s2io_nic *) data;
5412         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5413         u64 val64 = 0;
5414         u16 subid;
5415
5416         subid = sp->pdev->subsystem_device;
5417         if ((sp->device_type == XFRAME_II_DEVICE) ||
5418                    ((subid & 0xFF) >= 0x07)) {
5419                 val64 = readq(&bar0->gpio_control);
5420                 val64 ^= GPIO_CTRL_GPIO_0;
5421                 writeq(val64, &bar0->gpio_control);
5422         } else {
5423                 val64 = readq(&bar0->adapter_control);
5424                 val64 ^= ADAPTER_LED_ON;
5425                 writeq(val64, &bar0->adapter_control);
5426         }
5427
5428         mod_timer(&sp->id_timer, jiffies + HZ / 2);
5429 }
5430
5431 /**
5432  * s2io_ethtool_idnic - To physically identify the nic on the system.
5433  * @sp : private member of the device structure, which is a pointer to the
5434  * s2io_nic structure.
5435  * @id : pointer to the structure with identification parameters given by
5436  * ethtool.
5437  * Description: Used to physically identify the NIC on the system.
5438  * The Link LED will blink for a time specified by the user for
5439  * identification.
5440  * NOTE: The Link has to be Up to be able to blink the LED. Hence
5441  * identification is possible only if it's link is up.
5442  * Return value:
5443  * int , returns 0 on success
5444  */
5445
5446 static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
5447 {
5448         u64 val64 = 0, last_gpio_ctrl_val;
5449         struct s2io_nic *sp = dev->priv;
5450         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5451         u16 subid;
5452
5453         subid = sp->pdev->subsystem_device;
5454         last_gpio_ctrl_val = readq(&bar0->gpio_control);
5455         if ((sp->device_type == XFRAME_I_DEVICE) &&
5456                 ((subid & 0xFF) < 0x07)) {
5457                 val64 = readq(&bar0->adapter_control);
5458                 if (!(val64 & ADAPTER_CNTL_EN)) {
5459                         printk(KERN_ERR
5460                                "Adapter Link down, cannot blink LED\n");
5461                         return -EFAULT;
5462                 }
5463         }
5464         if (sp->id_timer.function == NULL) {
5465                 init_timer(&sp->id_timer);
5466                 sp->id_timer.function = s2io_phy_id;
5467                 sp->id_timer.data = (unsigned long) sp;
5468         }
5469         mod_timer(&sp->id_timer, jiffies);
5470         if (data)
5471                 msleep_interruptible(data * HZ);
5472         else
5473                 msleep_interruptible(MAX_FLICKER_TIME);
5474         del_timer_sync(&sp->id_timer);
5475
5476         if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) {
5477                 writeq(last_gpio_ctrl_val, &bar0->gpio_control);
5478                 last_gpio_ctrl_val = readq(&bar0->gpio_control);
5479         }
5480
5481         return 0;
5482 }
5483
5484 static void s2io_ethtool_gringparam(struct net_device *dev,
5485                                     struct ethtool_ringparam *ering)
5486 {
5487         struct s2io_nic *sp = dev->priv;
5488         int i,tx_desc_count=0,rx_desc_count=0;
5489
5490         if (sp->rxd_mode == RXD_MODE_1)
5491                 ering->rx_max_pending = MAX_RX_DESC_1;
5492         else if (sp->rxd_mode == RXD_MODE_3B)
5493                 ering->rx_max_pending = MAX_RX_DESC_2;
5494
5495         ering->tx_max_pending = MAX_TX_DESC;
5496         for (i = 0 ; i < sp->config.tx_fifo_num ; i++)
5497                 tx_desc_count += sp->config.tx_cfg[i].fifo_len;
5498
5499         DBG_PRINT(INFO_DBG,"\nmax txds : %d\n",sp->config.max_txds);
5500         ering->tx_pending = tx_desc_count;
5501         rx_desc_count = 0;
5502         for (i = 0 ; i < sp->config.rx_ring_num ; i++)
5503                 rx_desc_count += sp->config.rx_cfg[i].num_rxd;
5504
5505         ering->rx_pending = rx_desc_count;
5506
5507         ering->rx_mini_max_pending = 0;
5508         ering->rx_mini_pending = 0;
5509         if(sp->rxd_mode == RXD_MODE_1)
5510                 ering->rx_jumbo_max_pending = MAX_RX_DESC_1;
5511         else if (sp->rxd_mode == RXD_MODE_3B)
5512                 ering->rx_jumbo_max_pending = MAX_RX_DESC_2;
5513         ering->rx_jumbo_pending = rx_desc_count;
5514 }
5515
5516 /**
5517  * s2io_ethtool_getpause_data -Pause frame frame generation and reception.
5518  * @sp : private member of the device structure, which is a pointer to the
5519  *      s2io_nic structure.
5520  * @ep : pointer to the structure with pause parameters given by ethtool.
5521  * Description:
5522  * Returns the Pause frame generation and reception capability of the NIC.
5523  * Return value:
5524  *  void
5525  */
5526 static void s2io_ethtool_getpause_data(struct net_device *dev,
5527                                        struct ethtool_pauseparam *ep)
5528 {
5529         u64 val64;
5530         struct s2io_nic *sp = dev->priv;
5531         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5532
5533         val64 = readq(&bar0->rmac_pause_cfg);
5534         if (val64 & RMAC_PAUSE_GEN_ENABLE)
5535                 ep->tx_pause = TRUE;
5536         if (val64 & RMAC_PAUSE_RX_ENABLE)
5537                 ep->rx_pause = TRUE;
5538         ep->autoneg = FALSE;
5539 }
5540
5541 /**
5542  * s2io_ethtool_setpause_data -  set/reset pause frame generation.
5543  * @sp : private member of the device structure, which is a pointer to the
5544  *      s2io_nic structure.
5545  * @ep : pointer to the structure with pause parameters given by ethtool.
5546  * Description:
5547  * It can be used to set or reset Pause frame generation or reception
5548  * support of the NIC.
5549  * Return value:
5550  * int, returns 0 on Success
5551  */
5552
5553 static int s2io_ethtool_setpause_data(struct net_device *dev,
5554                                struct ethtool_pauseparam *ep)
5555 {
5556         u64 val64;
5557         struct s2io_nic *sp = dev->priv;
5558         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5559
5560         val64 = readq(&bar0->rmac_pause_cfg);
5561         if (ep->tx_pause)
5562                 val64 |= RMAC_PAUSE_GEN_ENABLE;
5563         else
5564                 val64 &= ~RMAC_PAUSE_GEN_ENABLE;
5565         if (ep->rx_pause)
5566                 val64 |= RMAC_PAUSE_RX_ENABLE;
5567         else
5568                 val64 &= ~RMAC_PAUSE_RX_ENABLE;
5569         writeq(val64, &bar0->rmac_pause_cfg);
5570         return 0;
5571 }
5572
5573 /**
5574  * read_eeprom - reads 4 bytes of data from user given offset.
5575  * @sp : private member of the device structure, which is a pointer to the
5576  *      s2io_nic structure.
5577  * @off : offset at which the data must be written
5578  * @data : Its an output parameter where the data read at the given
5579  *      offset is stored.
5580  * Description:
5581  * Will read 4 bytes of data from the user given offset and return the
5582  * read data.
5583  * NOTE: Will allow to read only part of the EEPROM visible through the
5584  *   I2C bus.
5585  * Return value:
5586  *  -1 on failure and 0 on success.
5587  */
5588
5589 #define S2IO_DEV_ID             5
5590 static int read_eeprom(struct s2io_nic * sp, int off, u64 * data)
5591 {
5592         int ret = -1;
5593         u32 exit_cnt = 0;
5594         u64 val64;
5595         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5596
5597         if (sp->device_type == XFRAME_I_DEVICE) {
5598                 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
5599                     I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ |
5600                     I2C_CONTROL_CNTL_START;
5601                 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
5602
5603                 while (exit_cnt < 5) {
5604                         val64 = readq(&bar0->i2c_control);
5605                         if (I2C_CONTROL_CNTL_END(val64)) {
5606                                 *data = I2C_CONTROL_GET_DATA(val64);
5607                                 ret = 0;
5608                                 break;
5609                         }
5610                         msleep(50);
5611                         exit_cnt++;
5612                 }
5613         }
5614
5615         if (sp->device_type == XFRAME_II_DEVICE) {
5616                 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
5617                         SPI_CONTROL_BYTECNT(0x3) |
5618                         SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off);
5619                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5620                 val64 |= SPI_CONTROL_REQ;
5621                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5622                 while (exit_cnt < 5) {
5623                         val64 = readq(&bar0->spi_control);
5624                         if (val64 & SPI_CONTROL_NACK) {
5625                                 ret = 1;
5626                                 break;
5627                         } else if (val64 & SPI_CONTROL_DONE) {
5628                                 *data = readq(&bar0->spi_data);
5629                                 *data &= 0xffffff;
5630                                 ret = 0;
5631                                 break;
5632                         }
5633                         msleep(50);
5634                         exit_cnt++;
5635                 }
5636         }
5637         return ret;
5638 }
5639
5640 /**
5641  *  write_eeprom - actually writes the relevant part of the data value.
5642  *  @sp : private member of the device structure, which is a pointer to the
5643  *       s2io_nic structure.
5644  *  @off : offset at which the data must be written
5645  *  @data : The data that is to be written
5646  *  @cnt : Number of bytes of the data that are actually to be written into
5647  *  the Eeprom. (max of 3)
5648  * Description:
5649  *  Actually writes the relevant part of the data value into the Eeprom
5650  *  through the I2C bus.
5651  * Return value:
5652  *  0 on success, -1 on failure.
5653  */
5654
5655 static int write_eeprom(struct s2io_nic * sp, int off, u64 data, int cnt)
5656 {
5657         int exit_cnt = 0, ret = -1;
5658         u64 val64;
5659         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5660
5661         if (sp->device_type == XFRAME_I_DEVICE) {
5662                 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
5663                     I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA((u32)data) |
5664                     I2C_CONTROL_CNTL_START;
5665                 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
5666
5667                 while (exit_cnt < 5) {
5668                         val64 = readq(&bar0->i2c_control);
5669                         if (I2C_CONTROL_CNTL_END(val64)) {
5670                                 if (!(val64 & I2C_CONTROL_NACK))
5671                                         ret = 0;
5672                                 break;
5673                         }
5674                         msleep(50);
5675                         exit_cnt++;
5676                 }
5677         }
5678
5679         if (sp->device_type == XFRAME_II_DEVICE) {
5680                 int write_cnt = (cnt == 8) ? 0 : cnt;
5681                 writeq(SPI_DATA_WRITE(data,(cnt<<3)), &bar0->spi_data);
5682
5683                 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
5684                         SPI_CONTROL_BYTECNT(write_cnt) |
5685                         SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off);
5686                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5687                 val64 |= SPI_CONTROL_REQ;
5688                 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5689                 while (exit_cnt < 5) {
5690                         val64 = readq(&bar0->spi_control);
5691                         if (val64 & SPI_CONTROL_NACK) {
5692                                 ret = 1;
5693                                 break;
5694                         } else if (val64 & SPI_CONTROL_DONE) {
5695                                 ret = 0;
5696                                 break;
5697                         }
5698                         msleep(50);
5699                         exit_cnt++;
5700                 }
5701         }
5702         return ret;
5703 }
5704 static void s2io_vpd_read(struct s2io_nic *nic)
5705 {
5706         u8 *vpd_data;
5707         u8 data;
5708         int i=0, cnt, fail = 0;
5709         int vpd_addr = 0x80;
5710
5711         if (nic->device_type == XFRAME_II_DEVICE) {
5712                 strcpy(nic->product_name, "Xframe II 10GbE network adapter");
5713                 vpd_addr = 0x80;
5714         }
5715         else {
5716                 strcpy(nic->product_name, "Xframe I 10GbE network adapter");
5717                 vpd_addr = 0x50;
5718         }
5719         strcpy(nic->serial_num, "NOT AVAILABLE");
5720
5721         vpd_data = kmalloc(256, GFP_KERNEL);
5722         if (!vpd_data) {
5723                 nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
5724                 return;
5725         }
5726         nic->mac_control.stats_info->sw_stat.mem_allocated += 256;
5727
5728         for (i = 0; i < 256; i +=4 ) {
5729                 pci_write_config_byte(nic->pdev, (vpd_addr + 2), i);
5730                 pci_read_config_byte(nic->pdev,  (vpd_addr + 2), &data);
5731                 pci_write_config_byte(nic->pdev, (vpd_addr + 3), 0);
5732                 for (cnt = 0; cnt <5; cnt++) {
5733                         msleep(2);
5734                         pci_read_config_byte(nic->pdev, (vpd_addr + 3), &data);
5735                         if (data == 0x80)
5736                                 break;
5737                 }
5738                 if (cnt >= 5) {
5739                         DBG_PRINT(ERR_DBG, "Read of VPD data failed\n");
5740                         fail = 1;
5741                         break;
5742                 }
5743                 pci_read_config_dword(nic->pdev,  (vpd_addr + 4),
5744                                       (u32 *)&vpd_data[i]);
5745         }
5746
5747         if(!fail) {
5748                 /* read serial number of adapter */
5749                 for (cnt = 0; cnt < 256; cnt++) {
5750                 if ((vpd_data[cnt] == 'S') &&
5751                         (vpd_data[cnt+1] == 'N') &&
5752                         (vpd_data[cnt+2] < VPD_STRING_LEN)) {
5753                                 memset(nic->serial_num, 0, VPD_STRING_LEN);
5754                                 memcpy(nic->serial_num, &vpd_data[cnt + 3],
5755                                         vpd_data[cnt+2]);
5756                                 break;
5757                         }
5758                 }
5759         }
5760
5761         if ((!fail) && (vpd_data[1] < VPD_STRING_LEN)) {
5762                 memset(nic->product_name, 0, vpd_data[1]);
5763                 memcpy(nic->product_name, &vpd_data[3], vpd_data[1]);
5764         }
5765         kfree(vpd_data);
5766         nic->mac_control.stats_info->sw_stat.mem_freed += 256;
5767 }
5768
5769 /**
5770  *  s2io_ethtool_geeprom  - reads the value stored in the Eeprom.
5771  *  @sp : private member of the device structure, which is a pointer to the *       s2io_nic structure.
5772  *  @eeprom : pointer to the user level structure provided by ethtool,
5773  *  containing all relevant information.
5774  *  @data_buf : user defined value to be written into Eeprom.
5775  *  Description: Reads the values stored in the Eeprom at given offset
5776  *  for a given length. Stores these values int the input argument data
5777  *  buffer 'data_buf' and returns these to the caller (ethtool.)
5778  *  Return value:
5779  *  int  0 on success
5780  */
5781
5782 static int s2io_ethtool_geeprom(struct net_device *dev,
5783                          struct ethtool_eeprom *eeprom, u8 * data_buf)
5784 {
5785         u32 i, valid;
5786         u64 data;
5787         struct s2io_nic *sp = dev->priv;
5788
5789         eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16);
5790
5791         if ((eeprom->offset + eeprom->len) > (XENA_EEPROM_SPACE))
5792                 eeprom->len = XENA_EEPROM_SPACE - eeprom->offset;
5793
5794         for (i = 0; i < eeprom->len; i += 4) {
5795                 if (read_eeprom(sp, (eeprom->offset + i), &data)) {
5796                         DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");
5797                         return -EFAULT;
5798                 }
5799                 valid = INV(data);
5800                 memcpy((data_buf + i), &valid, 4);
5801         }
5802         return 0;
5803 }
5804
5805 /**
5806  *  s2io_ethtool_seeprom - tries to write the user provided value in Eeprom
5807  *  @sp : private member of the device structure, which is a pointer to the
5808  *  s2io_nic structure.
5809  *  @eeprom : pointer to the user level structure provided by ethtool,
5810  *  containing all relevant information.
5811  *  @data_buf ; user defined value to be written into Eeprom.
5812  *  Description:
5813  *  Tries to write the user provided value in the Eeprom, at the offset
5814  *  given by the user.
5815  *  Return value:
5816  *  0 on success, -EFAULT on failure.
5817  */
5818
5819 static int s2io_ethtool_seeprom(struct net_device *dev,
5820                                 struct ethtool_eeprom *eeprom,
5821                                 u8 * data_buf)
5822 {
5823         int len = eeprom->len, cnt = 0;
5824         u64 valid = 0, data;
5825         struct s2io_nic *sp = dev->priv;
5826
5827         if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
5828                 DBG_PRINT(ERR_DBG,
5829                           "ETHTOOL_WRITE_EEPROM Err: Magic value ");
5830                 DBG_PRINT(ERR_DBG, "is wrong, Its not 0x%x\n",
5831                           eeprom->magic);
5832                 return -EFAULT;
5833         }
5834
5835         while (len) {
5836                 data = (u32) data_buf[cnt] & 0x000000FF;
5837                 if (data) {
5838                         valid = (u32) (data << 24);
5839                 } else
5840                         valid = data;
5841
5842                 if (write_eeprom(sp, (eeprom->offset + cnt), valid, 0)) {
5843                         DBG_PRINT(ERR_DBG,
5844                                   "ETHTOOL_WRITE_EEPROM Err: Cannot ");
5845                         DBG_PRINT(ERR_DBG,
5846                                   "write into the specified offset\n");
5847                         return -EFAULT;
5848                 }
5849                 cnt++;
5850                 len--;
5851         }
5852
5853         return 0;
5854 }
5855
5856 /**
5857  * s2io_register_test - reads and writes into all clock domains.
5858  * @sp : private member of the device structure, which is a pointer to the
5859  * s2io_nic structure.
5860  * @data : variable that returns the result of each of the test conducted b
5861  * by the driver.
5862  * Description:
5863  * Read and write into all clock domains. The NIC has 3 clock domains,
5864  * see that registers in all the three regions are accessible.
5865  * Return value:
5866  * 0 on success.
5867  */
5868
5869 static int s2io_register_test(struct s2io_nic * sp, uint64_t * data)
5870 {
5871         struct XENA_dev_config __iomem *bar0 = sp->bar0;
5872         u64 val64 = 0, exp_val;
5873         int fail = 0;
5874
5875         val64 = readq(&bar0->pif_rd_swapper_fb);
5876         if (val64 != 0x123456789abcdefULL) {
5877                 fail = 1;
5878                 DBG_PRINT(INFO_DBG, "Read Test level 1 fails\n");
5879         }
5880
5881         val64 = readq(&bar0->rmac_pause_cfg);
5882         if (val64 != 0xc000ffff00000000ULL) {
5883                 fail = 1;
5884                 DBG_PRINT(INFO_DBG, "Read Test level 2 fails\n");
5885         }
5886
5887         val64 = readq(&bar0->rx_queue_cfg);
5888         if (sp->device_type == XFRAME_II_DEVICE)
5889                 exp_val = 0x0404040404040404ULL;
5890         else
5891                 exp_val = 0x0808080808080808ULL;
5892         if (val64 != exp_val) {
5893                 fail = 1;
5894                 DBG_PRINT(INFO_DBG, "Read Test level 3 fails\n");
5895         }
5896
5897         val64 = readq(&bar0->xgxs_efifo_cfg);
5898         if (val64 != 0x000000001923141EULL) {
5899                 fail = 1;
5900                 DBG_PRINT(INFO_DBG, "Read Test level 4 fails\n");
5901         }
5902
5903         val64 = 0x5A5A5A5A5A5A5A5AULL;
5904         writeq(val64, &bar0->xmsi_data);
5905         val64 = readq(&bar0->xmsi_data);
5906         if (val64 != 0x5A5A5A5A5A5A5A5AULL) {
5907                 fail = 1;
5908                 DBG_PRINT(ERR_DBG, "Write Test level 1 fails\n");
5909         }
5910
5911         val64 = 0xA5A5A5A5A5A5A5A5ULL;
5912         writeq(val64, &bar0->xmsi_data);
5913         val64 = readq(&bar0->xmsi_data);
5914         if (val64 != 0xA5A5A5A5A5A5A5A5ULL) {
5915                 fail = 1;
5916                 DBG_PRINT(ERR_DBG, "Write Test level 2 fails\n");
5917         }
5918
5919         *data = fail;
5920         return fail;
5921 }
5922
5923 /**
5924  * s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
5925  * @sp : private member of the device structure, which is a pointer to the
5926  * s2io_nic structure.
5927  * @data:variable that returns the result of each of the test conducted by
5928  * the driver.
5929  * Description:
5930  * Verify that EEPROM in the xena can be programmed using I2C_CONTROL
5931  * register.
5932  * Return value:
5933  * 0 on success.
5934  */
5935
5936 static int s2io_eeprom_test(struct s2io_nic * sp, uint64_t * data)
5937 {
5938         int fail = 0;
5939         u64 ret_data, org_4F0, org_7F0;
5940         u8 saved_4F0 = 0, saved_7F0 = 0;
5941         struct net_device *dev = sp->dev;
5942
5943         /* Test Write Error at offset 0 */
5944         /* Note that SPI interface allows write access to all areas
5945          * of EEPROM. Hence doing all negative testing only for Xframe I.
5946          */
5947         if (sp->device_type == XFRAME_I_DEVICE)
5948                 if (!write_eeprom(sp, 0, 0, 3))
5949                         fail = 1;
5950
5951         /* Save current values at offsets 0x4F0 and 0x7F0 */
5952         if (!read_eeprom(sp, 0x4F0, &org_4F0))
5953                 saved_4F0 = 1;
5954         if (!read_eeprom(sp, 0x7F0, &org_7F0))
5955                 saved_7F0 = 1;
5956
5957         /* Test Write at offset 4f0 */
5958         if (write_eeprom(sp, 0x4F0, 0x012345, 3))
5959                 fail = 1;
5960         if (read_eeprom(sp, 0x4F0, &ret_data))
5961                 fail = 1;
5962
5963         if (ret_data != 0x012345) {
5964                 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "
5965                         "Data written %llx Data read %llx\n",
5966                         dev->name, (unsigned long long)0x12345,
5967                         (unsigned long long)ret_data);
5968                 fail = 1;
5969         }
5970
5971         /* Reset the EEPROM data go FFFF */
5972         write_eeprom(sp, 0x4F0, 0xFFFFFF, 3);
5973
5974         /* Test Write Request Error at offset 0x7c */
5975         if (sp->device_type == XFRAME_I_DEVICE)
5976                 if (!write_eeprom(sp, 0x07C, 0, 3))
5977                         fail = 1;
5978
5979         /* Test Write Request at offset 0x7f0 */
5980         if (write_eeprom(sp, 0x7F0, 0x012345, 3))
5981                 fail = 1;
5982         if (read_eeprom(sp, 0x7F0, &ret_data))
5983                 fail = 1;
5984
5985         if (ret_data != 0x012345) {
5986                 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "
5987                         "Data written %llx Data read %llx\n",
5988                         dev->name, (unsigned long long)0x12345,
5989                         (unsigned long long)ret_data);
5990                 fail = 1;
5991         }
5992
5993         /* Reset the EEPROM data go FFFF */
5994         write_eeprom(sp, 0x7F0, 0xFFFFFF, 3);
5995
5996         if (sp->device_type == XFRAME_I_DEVICE) {
5997                 /* Test Write Error at offset 0x80 */
5998                 if (!write_eeprom(sp, 0x080, 0, 3))
5999                         fail = 1;
6000
6001                 /* Test Write Error at offset 0xfc */
6002                 if (!write_eeprom(sp, 0x0FC, 0, 3))
6003                         fail = 1;
6004
6005                 /* Test Write Error at offset 0x100 */
6006                 if (!write_eeprom(sp, 0x100, 0, 3))
6007                         fail = 1;
6008
6009                 /* Test Write Error at offset 4ec */
6010                 if (!write_eeprom(sp, 0x4EC, 0, 3))
6011                         fail = 1;
6012         }
6013
6014         /* Restore values at offsets 0x4F0 and 0x7F0 */
6015         if (saved_4F0)
6016                 write_eeprom(sp, 0x4F0, org_4F0, 3);
6017         if (saved_7F0)
6018                 write_eeprom(sp, 0x7F0, org_7F0, 3);
6019
6020         *data = fail;
6021         return fail;
6022 }
6023
6024 /**
6025  * s2io_bist_test - invokes the MemBist test of the card .
6026  * @sp : private member of the device structure, which is a pointer to the
6027  * s2io_nic structure.
6028  * @data:variable that returns the result of each of the test conducted by
6029  * the driver.
6030  * Description:
6031  * This invokes the MemBist test of the card. We give around
6032  * 2 secs time for the Test to complete. If it's still not complete
6033  * within this peiod, we consider that the test failed.
6034  * Return value:
6035  * 0 on success and -1 on failure.
6036  */
6037
6038 static int s2io_bist_test(struct s2io_nic * sp, uint64_t * data)
6039 {
6040         u8 bist = 0;
6041         int cnt = 0, ret = -1;
6042
6043         pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
6044         bist |= PCI_BIST_START;
6045         pci_write_config_word(sp->pdev, PCI_BIST, bist);
6046
6047         while (cnt < 20) {
6048                 pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
6049                 if (!(bist & PCI_BIST_START)) {
6050                         *data = (bist & PCI_BIST_CODE_MASK);
6051                         ret = 0;
6052                         break;
6053                 }
6054                 msleep(100);
6055                 cnt++;
6056         }
6057
6058         return ret;
6059 }
6060
6061 /**
6062  * s2io-link_test - verifies the link state of the nic
6063  * @sp ; private member of the device structure, which is a pointer to the
6064  * s2io_nic structure.
6065  * @data: variable that returns the result of each of the test conducted by
6066  * the driver.
6067  * Description:
6068  * The function verifies the link state of the NIC and updates the input
6069  * argument 'data' appropriately.
6070  * Return value:
6071  * 0 on success.
6072  */
6073
6074 static int s2io_link_test(struct s2io_nic * sp, uint64_t * data)
6075 {
6076         struct XENA_dev_config __iomem *bar0 = sp->bar0;
6077         u64 val64;
6078
6079         val64 = readq(&bar0->adapter_status);
6080         if(!(LINK_IS_UP(val64)))
6081                 *data = 1;
6082         else
6083                 *data = 0;
6084
6085         return *data;
6086 }
6087
6088 /**
6089  * s2io_rldram_test - offline test for access to the RldRam chip on the NIC
6090  * @sp - private member of the device structure, which is a pointer to the
6091  * s2io_nic structure.
6092  * @data - variable that returns the result of each of the test
6093  * conducted by the driver.
6094  * Description:
6095  *  This is one of the offline test that tests the read and write
6096  *  access to the RldRam chip on the NIC.
6097  * Return value:
6098  *  0 on success.
6099  */
6100
6101 static int s2io_rldram_test(struct s2io_nic * sp, uint64_t * data)
6102 {
6103         struct XENA_dev_config __iomem *bar0 = sp->bar0;
6104         u64 val64;
6105         int cnt, iteration = 0, test_fail = 0;
6106
6107         val64 = readq(&bar0->adapter_control);
6108         val64 &= ~ADAPTER_ECC_EN;
6109         writeq(val64, &bar0->adapter_control);
6110
6111         val64 = readq(&bar0->mc_rldram_test_ctrl);
6112         val64 |= MC_RLDRAM_TEST_MODE;
6113         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6114
6115         val64 = readq(&bar0->mc_rldram_mrs);
6116         val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE;
6117         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
6118
6119         val64 |= MC_RLDRAM_MRS_ENABLE;
6120         SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
6121
6122         while (iteration < 2) {
6123                 val64 = 0x55555555aaaa0000ULL;
6124                 if (iteration == 1) {
6125                         val64 ^= 0xFFFFFFFFFFFF0000ULL;
6126                 }
6127                 writeq(val64, &bar0->mc_rldram_test_d0);
6128
6129                 val64 = 0xaaaa5a5555550000ULL;
6130                 if (iteration == 1) {
6131                         val64 ^= 0xFFFFFFFFFFFF0000ULL;
6132                 }
6133                 writeq(val64, &bar0->mc_rldram_test_d1);
6134
6135                 val64 = 0x55aaaaaaaa5a0000ULL;
6136                 if (iteration == 1) {
6137                         val64 ^= 0xFFFFFFFFFFFF0000ULL;
6138                 }
6139                 writeq(val64, &bar0->mc_rldram_test_d2);
6140
6141                 val64 = (u64) (0x0000003ffffe0100ULL);
6142                 writeq(val64, &bar0->mc_rldram_test_add);
6143
6144                 val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE |
6145                         MC_RLDRAM_TEST_GO;
6146                 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6147
6148                 for (cnt = 0; cnt < 5; cnt++) {
6149                         val64 = readq(&bar0->mc_rldram_test_ctrl);
6150                         if (val64 & MC_RLDRAM_TEST_DONE)
6151                                 break;
6152                         msleep(200);
6153                 }
6154
6155                 if (cnt == 5)
6156                         break;
6157
6158                 val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
6159                 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6160
6161                 for (cnt = 0; cnt < 5; cnt++) {
6162                         val64 = readq(&bar0->mc_rldram_test_ctrl);
6163                         if (val64 & MC_RLDRAM_TEST_DONE)
6164                                 break;
6165                         msleep(500);
6166                 }
6167
6168                 if (cnt == 5)
6169                         break;
6170
6171                 val64 = readq(&bar0->mc_rldram_test_ctrl);
6172                 if (!(val64 & MC_RLDRAM_TEST_PASS))
6173                         test_fail = 1;
6174
6175                 iteration++;
6176         }
6177
6178         *data = test_fail;
6179
6180         /* Bring the adapter out of test mode */
6181         SPECIAL_REG_WRITE(0, &bar0->mc_rldram_test_ctrl, LF);
6182
6183         return test_fail;
6184 }
6185
6186 /**
6187  *  s2io_ethtool_test - conducts 6 tsets to determine the health of card.
6188  *  @sp : private member of the device structure, which is a pointer to the
6189  *  s2io_nic structure.
6190  *  @ethtest : pointer to a ethtool command specific structure that will be
6191  *  returned to the user.
6192  *  @data : variable that returns the result of each of the test
6193  * conducted by the driver.
6194  * Description:
6195  *  This function conducts 6 tests ( 4 offline and 2 online) to determine
6196  *  the health of the card.
6197  * Return value:
6198  *  void
6199  */
6200
6201 static void s2io_ethtool_test(struct net_device *dev,
6202                               struct ethtool_test *ethtest,
6203                               uint64_t * data)
6204 {
6205         struct s2io_nic *sp = dev->priv;
6206         int orig_state = netif_running(sp->dev);
6207
6208         if (ethtest->flags == ETH_TEST_FL_OFFLINE) {
6209                 /* Offline Tests. */
6210                 if (orig_state)
6211                         s2io_close(sp->dev);
6212
6213                 if (s2io_register_test(sp, &data[0]))
6214                         ethtest->flags |= ETH_TEST_FL_FAILED;
6215
6216                 s2io_reset(sp);
6217
6218                 if (s2io_rldram_test(sp, &data[3]))
6219                         ethtest->flags |= ETH_TEST_FL_FAILED;
6220
6221                 s2io_reset(sp);
6222
6223                 if (s2io_eeprom_test(sp, &data[1]))
6224                         ethtest->flags |= ETH_TEST_FL_FAILED;
6225
6226                 if (s2io_bist_test(sp, &data[4]))
6227                         ethtest->flags |= ETH_TEST_FL_FAILED;
6228
6229                 if (orig_state)
6230                         s2io_open(sp->dev);
6231
6232                 data[2] = 0;
6233         } else {
6234                 /* Online Tests. */
6235                 if (!orig_state) {
6236                         DBG_PRINT(ERR_DBG,
6237                                   "%s: is not up, cannot run test\n",
6238                                   dev->name);
6239                         data[0] = -1;
6240                         data[1] = -1;
6241                         data[2] = -1;
6242                         data[3] = -1;
6243                         data[4] = -1;
6244                 }
6245
6246                 if (s2io_link_test(sp, &data[2]))
6247                         ethtest->flags |= ETH_TEST_FL_FAILED;
6248
6249                 data[0] = 0;
6250                 data[1] = 0;
6251                 data[3] = 0;
6252                 data[4] = 0;
6253         }
6254 }
6255
6256 static void s2io_get_ethtool_stats(struct net_device *dev,
6257                                    struct ethtool_stats *estats,
6258                                    u64 * tmp_stats)
6259 {
6260         int i = 0, k;
6261         struct s2io_nic *sp = dev->priv;
6262         struct stat_block *stat_info = sp->mac_control.stats_info;
6263
6264         s2io_updt_stats(sp);
6265         tmp_stats[i++] =
6266                 (u64)le32_to_cpu(stat_info->tmac_frms_oflow) << 32  |
6267                 le32_to_cpu(stat_info->tmac_frms);
6268         tmp_stats[i++] =
6269                 (u64)le32_to_cpu(stat_info->tmac_data_octets_oflow) << 32 |
6270                 le32_to_cpu(stat_info->tmac_data_octets);
6271         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_drop_frms);
6272         tmp_stats[i++] =
6273                 (u64)le32_to_cpu(stat_info->tmac_mcst_frms_oflow) << 32 |
6274                 le32_to_cpu(stat_info->tmac_mcst_frms);
6275         tmp_stats[i++] =
6276                 (u64)le32_to_cpu(stat_info->tmac_bcst_frms_oflow) << 32 |
6277                 le32_to_cpu(stat_info->tmac_bcst_frms);
6278         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_pause_ctrl_frms);
6279         tmp_stats[i++] =
6280                 (u64)le32_to_cpu(stat_info->tmac_ttl_octets_oflow) << 32 |
6281                 le32_to_cpu(stat_info->tmac_ttl_octets);
6282         tmp_stats[i++] =
6283                 (u64)le32_to_cpu(stat_info->tmac_ucst_frms_oflow) << 32 |
6284                 le32_to_cpu(stat_info->tmac_ucst_frms);
6285         tmp_stats[i++] =
6286                 (u64)le32_to_cpu(stat_info->tmac_nucst_frms_oflow) << 32 |
6287                 le32_to_cpu(stat_info->tmac_nucst_frms);
6288         tmp_stats[i++] =
6289                 (u64)le32_to_cpu(stat_info->tmac_any_err_frms_oflow) << 32 |
6290                 le32_to_cpu(stat_info->tmac_any_err_frms);
6291         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_ttl_less_fb_octets);
6292         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_vld_ip_octets);
6293         tmp_stats[i++] =
6294                 (u64)le32_to_cpu(stat_info->tmac_vld_ip_oflow) << 32 |
6295                 le32_to_cpu(stat_info->tmac_vld_ip);
6296         tmp_stats[i++] =
6297                 (u64)le32_to_cpu(stat_info->tmac_drop_ip_oflow) << 32 |
6298                 le32_to_cpu(stat_info->tmac_drop_ip);
6299         tmp_stats[i++] =
6300                 (u64)le32_to_cpu(stat_info->tmac_icmp_oflow) << 32 |
6301                 le32_to_cpu(stat_info->tmac_icmp);
6302         tmp_stats[i++] =
6303                 (u64)le32_to_cpu(stat_info->tmac_rst_tcp_oflow) << 32 |
6304                 le32_to_cpu(stat_info->tmac_rst_tcp);
6305         tmp_stats[i++] = le64_to_cpu(stat_info->tmac_tcp);
6306         tmp_stats[i++] = (u64)le32_to_cpu(stat_info->tmac_udp_oflow) << 32 |
6307                 le32_to_cpu(stat_info->tmac_udp);
6308         tmp_stats[i++] =
6309                 (u64)le32_to_cpu(stat_info->rmac_vld_frms_oflow) << 32 |
6310                 le32_to_cpu(stat_info->rmac_vld_frms);
6311         tmp_stats[i++] =
6312                 (u64)le32_to_cpu(stat_info->rmac_data_octets_oflow) << 32 |
6313                 le32_to_cpu(stat_info->rmac_data_octets);
6314         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_fcs_err_frms);
6315         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_drop_frms);
6316         tmp_stats[i++] =
6317                 (u64)le32_to_cpu(stat_info->rmac_vld_mcst_frms_oflow) << 32 |
6318                 le32_to_cpu(stat_info->rmac_vld_mcst_frms);
6319         tmp_stats[i++] =
6320                 (u64)le32_to_cpu(stat_info->rmac_vld_bcst_frms_oflow) << 32 |
6321                 le32_to_cpu(stat_info->rmac_vld_bcst_frms);
6322         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_in_rng_len_err_frms);
6323         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_out_rng_len_err_frms);
6324         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_long_frms);
6325         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_pause_ctrl_frms);
6326         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_unsup_ctrl_frms);
6327         tmp_stats[i++] =
6328                 (u64)le32_to_cpu(stat_info->rmac_ttl_octets_oflow) << 32 |
6329                 le32_to_cpu(stat_info->rmac_ttl_octets);
6330         tmp_stats[i++] =
6331                 (u64)le32_to_cpu(stat_info->rmac_accepted_ucst_frms_oflow)
6332                 << 32 | le32_to_cpu(stat_info->rmac_accepted_ucst_frms);
6333         tmp_stats[i++] =
6334                 (u64)le32_to_cpu(stat_info->rmac_accepted_nucst_frms_oflow)
6335                  << 32 | le32_to_cpu(stat_info->rmac_accepted_nucst_frms);
6336         tmp_stats[i++] =
6337                 (u64)le32_to_cpu(stat_info->rmac_discarded_frms_oflow) << 32 |
6338                 le32_to_cpu(stat_info->rmac_discarded_frms);
6339         tmp_stats[i++] =
6340                 (u64)le32_to_cpu(stat_info->rmac_drop_events_oflow)
6341                  << 32 | le32_to_cpu(stat_info->rmac_drop_events);
6342         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_less_fb_octets);
6343         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_frms);
6344         tmp_stats[i++] =
6345                 (u64)le32_to_cpu(stat_info->rmac_usized_frms_oflow) << 32 |
6346                 le32_to_cpu(stat_info->rmac_usized_frms);
6347         tmp_stats[i++] =
6348                 (u64)le32_to_cpu(stat_info->rmac_osized_frms_oflow) << 32 |
6349                 le32_to_cpu(stat_info->rmac_osized_frms);
6350         tmp_stats[i++] =
6351                 (u64)le32_to_cpu(stat_info->rmac_frag_frms_oflow) << 32 |
6352                 le32_to_cpu(stat_info->rmac_frag_frms);
6353         tmp_stats[i++] =
6354                 (u64)le32_to_cpu(stat_info->rmac_jabber_frms_oflow) << 32 |
6355                 le32_to_cpu(stat_info->rmac_jabber_frms);
6356         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_64_frms);
6357         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_65_127_frms);
6358         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_128_255_frms);
6359         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_256_511_frms);
6360         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_512_1023_frms);
6361         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_1024_1518_frms);
6362         tmp_stats[i++] =
6363                 (u64)le32_to_cpu(stat_info->rmac_ip_oflow) << 32 |
6364                 le32_to_cpu(stat_info->rmac_ip);
6365         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ip_octets);
6366         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_hdr_err_ip);
6367         tmp_stats[i++] =
6368                 (u64)le32_to_cpu(stat_info->rmac_drop_ip_oflow) << 32 |
6369                 le32_to_cpu(stat_info->rmac_drop_ip);
6370         tmp_stats[i++] =
6371                 (u64)le32_to_cpu(stat_info->rmac_icmp_oflow) << 32 |
6372                 le32_to_cpu(stat_info->rmac_icmp);
6373         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_tcp);
6374         tmp_stats[i++] =
6375                 (u64)le32_to_cpu(stat_info->rmac_udp_oflow) << 32 |
6376                 le32_to_cpu(stat_info->rmac_udp);
6377         tmp_stats[i++] =
6378                 (u64)le32_to_cpu(stat_info->rmac_err_drp_udp_oflow) << 32 |
6379                 le32_to_cpu(stat_info->rmac_err_drp_udp);
6380         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_err_sym);
6381         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q0);
6382         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q1);
6383         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q2);
6384         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q3);
6385         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q4);
6386         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q5);
6387         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q6);
6388         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q7);
6389         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q0);
6390         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q1);
6391         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q2);
6392         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q3);
6393         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q4);
6394         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q5);
6395         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q6);
6396         tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q7);
6397         tmp_stats[i++] =
6398                 (u64)le32_to_cpu(stat_info->rmac_pause_cnt_oflow) << 32 |
6399                 le32_to_cpu(stat_info->rmac_pause_cnt);
6400         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_data_err_cnt);
6401         tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_ctrl_err_cnt);
6402         tmp_stats[i++] =
6403                 (u64)le32_to_cpu(stat_info->rmac_accepted_ip_oflow) << 32 |
6404                 le32_to_cpu(stat_info->rmac_accepted_ip);
6405         tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp);
6406         tmp_stats[i++] = le32_to_cpu(stat_info->rd_req_cnt);
6407         tmp_stats[i++] = le32_to_cpu(stat_info->new_rd_req_cnt);
6408         tmp_stats[i++] = le32_to_cpu(stat_info->new_rd_req_rtry_cnt);
6409         tmp_stats[i++] = le32_to_cpu(stat_info->rd_rtry_cnt);
6410         tmp_stats[i++] = le32_to_cpu(stat_info->wr_rtry_rd_ack_cnt);
6411         tmp_stats[i++] = le32_to_cpu(stat_info->wr_req_cnt);
6412         tmp_stats[i++] = le32_to_cpu(stat_info->new_wr_req_cnt);
6413         tmp_stats[i++] = le32_to_cpu(stat_info->new_wr_req_rtry_cnt);
6414         tmp_stats[i++] = le32_to_cpu(stat_info->wr_rtry_cnt);
6415         tmp_stats[i++] = le32_to_cpu(stat_info->wr_disc_cnt);
6416         tmp_stats[i++] = le32_to_cpu(stat_info->rd_rtry_wr_ack_cnt);
6417         tmp_stats[i++] = le32_to_cpu(stat_info->txp_wr_cnt);
6418         tmp_stats[i++] = le32_to_cpu(stat_info->txd_rd_cnt);
6419         tmp_stats[i++] = le32_to_cpu(stat_info->txd_wr_cnt);
6420         tmp_stats[i++] = le32_to_cpu(stat_info->rxd_rd_cnt);
6421         tmp_stats[i++] = le32_to_cpu(stat_info->rxd_wr_cnt);
6422         tmp_stats[i++] = le32_to_cpu(stat_info->txf_rd_cnt);
6423         tmp_stats[i++] = le32_to_cpu(stat_info->rxf_wr_cnt);
6424
6425         /* Enhanced statistics exist only for Hercules */
6426         if(sp->device_type == XFRAME_II_DEVICE) {
6427                 tmp_stats[i++] =
6428                                 le64_to_cpu(stat_info->rmac_ttl_1519_4095_frms);
6429                 tmp_stats[i++] =
6430                                 le64_to_cpu(stat_info->rmac_ttl_4096_8191_frms);
6431                 tmp_stats[i++] =
6432                                 le64_to_cpu(stat_info->rmac_ttl_8192_max_frms);
6433                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_gt_max_frms);
6434                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_osized_alt_frms);
6435                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_jabber_alt_frms);
6436                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_gt_max_alt_frms);
6437                 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_vlan_frms);
6438                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_len_discard);
6439                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_fcs_discard);
6440                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_pf_discard);
6441                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_da_discard);
6442                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_red_discard);
6443                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_rts_discard);
6444                 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_ingm_full_discard);
6445                 tmp_stats[i++] = le32_to_cpu(stat_info->link_fault_cnt);
6446         }
6447
6448         tmp_stats[i++] = 0;
6449         tmp_stats[i++] = stat_info->sw_stat.single_ecc_errs;
6450         tmp_stats[i++] = stat_info->sw_stat.double_ecc_errs;
6451         tmp_stats[i++] = stat_info->sw_stat.parity_err_cnt;
6452         tmp_stats[i++] = stat_info->sw_stat.serious_err_cnt;
6453         tmp_stats[i++] = stat_info->sw_stat.soft_reset_cnt;
6454         tmp_stats[i++] = stat_info->sw_stat.fifo_full_cnt;
6455         for (k = 0; k < MAX_RX_RINGS; k++)
6456                 tmp_stats[i++] = stat_info->sw_stat.ring_full_cnt[k];
6457         tmp_stats[i++] = stat_info->xpak_stat.alarm_transceiver_temp_high;
6458         tmp_stats[i++] = stat_info->xpak_stat.alarm_transceiver_temp_low;
6459         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_bias_current_high;
6460         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_bias_current_low;
6461         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_output_power_high;
6462         tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_output_power_low;
6463         tmp_stats[i++] = stat_info->xpak_stat.warn_transceiver_temp_high;
6464         tmp_stats[i++] = stat_info->xpak_stat.warn_transceiver_temp_low;
6465         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_bias_current_high;
6466         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_bias_current_low;
6467         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_output_power_high;
6468         tmp_stats[i++] = stat_info->xpak_stat.warn_laser_output_power_low;
6469         tmp_stats[i++] = stat_info->sw_stat.clubbed_frms_cnt;
6470         tmp_stats[i++] = stat_info->sw_stat.sending_both;
6471         tmp_stats[i++] = stat_info->sw_stat.outof_sequence_pkts;
6472         tmp_stats[i++] = stat_info->sw_stat.flush_max_pkts;
6473         if (stat_info->sw_stat.num_aggregations) {
6474                 u64 tmp = stat_info->sw_stat.sum_avg_pkts_aggregated;
6475                 int count = 0;
6476                 /*
6477                  * Since 64-bit divide does not work on all platforms,
6478                  * do repeated subtraction.
6479                  */
6480                 while (tmp >= stat_info->sw_stat.num_aggregations) {
6481                         tmp -= stat_info->sw_stat.num_aggregations;
6482                         count++;
6483                 }
6484                 tmp_stats[i++] = count;
6485         }
6486         else
6487                 tmp_stats[i++] = 0;
6488         tmp_stats[i++] = stat_info->sw_stat.mem_alloc_fail_cnt;
6489         tmp_stats[i++] = stat_info->sw_stat.pci_map_fail_cnt;
6490         tmp_stats[i++] = stat_info->sw_stat.watchdog_timer_cnt;
6491         tmp_stats[i++] = stat_info->sw_stat.mem_allocated;
6492         tmp_stats[i++] = stat_info->sw_stat.mem_freed;
6493         tmp_stats[i++] = stat_info->sw_stat.link_up_cnt;
6494         tmp_stats[i++] = stat_info->sw_stat.link_down_cnt;
6495         tmp_stats[i++] = stat_info->sw_stat.link_up_time;
6496         tmp_stats[i++] = stat_info->sw_stat.link_down_time;
6497
6498         tmp_stats[i++] = stat_info->sw_stat.tx_buf_abort_cnt;
6499         tmp_stats[i++] = stat_info->sw_stat.tx_desc_abort_cnt;
6500         tmp_stats[i++] = stat_info->sw_stat.tx_parity_err_cnt;
6501         tmp_stats[i++] = stat_info->sw_stat.tx_link_loss_cnt;
6502         tmp_stats[i++] = stat_info->sw_stat.tx_list_proc_err_cnt;
6503
6504         tmp_stats[i++] = stat_info->sw_stat.rx_parity_err_cnt;
6505         tmp_stats[i++] = stat_info->sw_stat.rx_abort_cnt;
6506         tmp_stats[i++] = stat_info->sw_stat.rx_parity_abort_cnt;
6507         tmp_stats[i++] = stat_info->sw_stat.rx_rda_fail_cnt;
6508         tmp_stats[i++] = stat_info->sw_stat.rx_unkn_prot_cnt;
6509         tmp_stats[i++] = stat_info->sw_stat.rx_fcs_err_cnt;
6510         tmp_stats[i++] = stat_info->sw_stat.rx_buf_size_err_cnt;
6511         tmp_stats[i++] = stat_info->sw_stat.rx_rxd_corrupt_cnt;
6512         tmp_stats[i++] = stat_info->sw_stat.rx_unkn_err_cnt;
6513         tmp_stats[i++] = stat_info->sw_stat.tda_err_cnt;
6514         tmp_stats[i++] = stat_info->sw_stat.pfc_err_cnt;
6515         tmp_stats[i++] = stat_info->sw_stat.pcc_err_cnt;
6516         tmp_stats[i++] = stat_info->sw_stat.tti_err_cnt;
6517         tmp_stats[i++] = stat_info->sw_stat.tpa_err_cnt;
6518         tmp_stats[i++] = stat_info->sw_stat.sm_err_cnt;
6519         tmp_stats[i++] = stat_info->sw_stat.lso_err_cnt;
6520         tmp_stats[i++] = stat_info->sw_stat.mac_tmac_err_cnt;
6521         tmp_stats[i++] = stat_info->sw_stat.mac_rmac_err_cnt;
6522         tmp_stats[i++] = stat_info->sw_stat.xgxs_txgxs_err_cnt;
6523         tmp_stats[i++] = stat_info->sw_stat.xgxs_rxgxs_err_cnt;
6524         tmp_stats[i++] = stat_info->sw_stat.rc_err_cnt;
6525         tmp_stats[i++] = stat_info->sw_stat.prc_pcix_err_cnt;
6526         tmp_stats[i++] = stat_info->sw_stat.rpa_err_cnt;
6527         tmp_stats[i++] = stat_info->sw_stat.rda_err_cnt;
6528         tmp_stats[i++] = stat_info->sw_stat.rti_err_cnt;
6529         tmp_stats[i++] = stat_info->sw_stat.mc_err_cnt;
6530 }
6531
6532 static int s2io_ethtool_get_regs_len(struct net_device *dev)
6533 {
6534         return (XENA_REG_SPACE);
6535 }
6536
6537
6538 static u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
6539 {
6540         struct s2io_nic *sp = dev->priv;
6541
6542         return (sp->rx_csum);
6543 }
6544
6545 static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
6546 {
6547         struct s2io_nic *sp = dev->priv;
6548
6549         if (data)
6550                 sp->rx_csum = 1;
6551         else
6552                 sp->rx_csum = 0;
6553
6554         return 0;
6555 }
6556
6557 static int s2io_get_eeprom_len(struct net_device *dev)
6558 {
6559         return (XENA_EEPROM_SPACE);
6560 }
6561
6562 static int s2io_get_sset_count(struct net_device *dev, int sset)
6563 {
6564         struct s2io_nic *sp = dev->priv;
6565
6566         switch (sset) {
6567         case ETH_SS_TEST:
6568                 return S2IO_TEST_LEN;
6569         case ETH_SS_STATS:
6570                 switch(sp->device_type) {
6571                 case XFRAME_I_DEVICE:
6572                         return XFRAME_I_STAT_LEN;
6573                 case XFRAME_II_DEVICE:
6574                         return XFRAME_II_STAT_LEN;
6575                 default:
6576                         return 0;
6577                 }
6578         default:
6579                 return -EOPNOTSUPP;
6580         }
6581 }
6582
6583 static void s2io_ethtool_get_strings(struct net_device *dev,
6584                                      u32 stringset, u8 * data)
6585 {
6586         int stat_size = 0;
6587         struct s2io_nic *sp = dev->priv;
6588
6589         switch (stringset) {
6590         case ETH_SS_TEST:
6591                 memcpy(data, s2io_gstrings, S2IO_STRINGS_LEN);
6592                 break;
6593         case ETH_SS_STATS:
6594                 stat_size = sizeof(ethtool_xena_stats_keys);
6595                 memcpy(data, &ethtool_xena_stats_keys,stat_size);
6596                 if(sp->device_type == XFRAME_II_DEVICE) {
6597                         memcpy(data + stat_size,
6598                                 &ethtool_enhanced_stats_keys,
6599                                 sizeof(ethtool_enhanced_stats_keys));
6600                         stat_size += sizeof(ethtool_enhanced_stats_keys);
6601                 }
6602
6603                 memcpy(data + stat_size, &ethtool_driver_stats_keys,
6604                         sizeof(ethtool_driver_stats_keys));
6605         }
6606 }
6607
6608 static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
6609 {
6610         if (data)
6611                 dev->features |= NETIF_F_IP_CSUM;
6612         else
6613                 dev->features &= ~NETIF_F_IP_CSUM;
6614
6615         return 0;
6616 }
6617
6618 static u32 s2io_ethtool_op_get_tso(struct net_device *dev)
6619 {
6620         return (dev->features & NETIF_F_TSO) != 0;
6621 }
6622 static int s2io_ethtool_op_set_tso(struct net_device *dev, u32 data)
6623 {
6624         if (data)
6625                 dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
6626         else
6627                 dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
6628
6629         return 0;
6630 }
6631
6632 static const struct ethtool_ops netdev_ethtool_ops = {
6633         .get_settings = s2io_ethtool_gset,
6634         .set_settings = s2io_ethtool_sset,
6635         .get_drvinfo = s2io_ethtool_gdrvinfo,
6636         .get_regs_len = s2io_ethtool_get_regs_len,
6637         .get_regs = s2io_ethtool_gregs,
6638         .get_link = ethtool_op_get_link,
6639         .get_eeprom_len = s2io_get_eeprom_len,
6640         .get_eeprom = s2io_ethtool_geeprom,
6641         .set_eeprom = s2io_ethtool_seeprom,
6642         .get_ringparam = s2io_ethtool_gringparam,
6643         .get_pauseparam = s2io_ethtool_getpause_data,
6644         .set_pauseparam = s2io_ethtool_setpause_data,
6645         .get_rx_csum = s2io_ethtool_get_rx_csum,
6646         .set_rx_csum = s2io_ethtool_set_rx_csum,
6647         .set_tx_csum = s2io_ethtool_op_set_tx_csum,
6648         .set_sg = ethtool_op_set_sg,
6649         .get_tso = s2io_ethtool_op_get_tso,
6650         .set_tso = s2io_ethtool_op_set_tso,
6651         .set_ufo = ethtool_op_set_ufo,
6652         .self_test = s2io_ethtool_test,
6653         .get_strings = s2io_ethtool_get_strings,
6654         .phys_id = s2io_ethtool_idnic,
6655         .get_ethtool_stats = s2io_get_ethtool_stats,
6656         .get_sset_count = s2io_get_sset_count,
6657 };
6658
6659 /**
6660  *  s2io_ioctl - Entry point for the Ioctl
6661  *  @dev :  Device pointer.
6662  *  @ifr :  An IOCTL specefic structure, that can contain a pointer to
6663  *  a proprietary structure used to pass information to the driver.
6664  *  @cmd :  This is used to distinguish between the different commands that
6665  *  can be passed to the IOCTL functions.
6666  *  Description:
6667  *  Currently there are no special functionality supported in IOCTL, hence
6668  *  function always return EOPNOTSUPPORTED
6669  */
6670
6671 static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
6672 {
6673         return -EOPNOTSUPP;
6674 }
6675
6676 /**
6677  *  s2io_change_mtu - entry point to change MTU size for the device.
6678  *   @dev : device pointer.
6679  *   @new_mtu : the new MTU size for the device.
6680  *   Description: A driver entry point to change MTU size for the device.
6681  *   Before changing the MTU the device must be stopped.
6682  *  Return value:
6683  *   0 on success and an appropriate (-)ve integer as defined in errno.h
6684  *   file on failure.
6685  */
6686
6687 static int s2io_change_mtu(struct net_device *dev, int new_mtu)
6688 {
6689         struct s2io_nic *sp = dev->priv;
6690         int ret = 0;
6691
6692         if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
6693                 DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n",
6694                           dev->name);
6695                 return -EPERM;
6696         }
6697
6698         dev->mtu = new_mtu;
6699         if (netif_running(dev)) {
6700                 s2io_stop_all_tx_queue(sp);
6701                 s2io_card_down(sp);
6702                 ret = s2io_card_up(sp);
6703                 if (ret) {
6704                         DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
6705                                   __FUNCTION__);
6706                         return ret;
6707                 }
6708                 s2io_wake_all_tx_queue(sp);
6709         } else { /* Device is down */
6710                 struct XENA_dev_config __iomem *bar0 = sp->bar0;
6711                 u64 val64 = new_mtu;
6712
6713                 writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
6714         }
6715
6716         return ret;
6717 }
6718
6719 /**
6720  * s2io_set_link - Set the LInk status
6721  * @data: long pointer to device private structue
6722  * Description: Sets the link status for the adapter
6723  */
6724
6725 static void s2io_set_link(struct work_struct *work)
6726 {
6727         struct s2io_nic *nic = container_of(work, struct s2io_nic, set_link_task);
6728         struct net_device *dev = nic->dev;
6729         struct XENA_dev_config __iomem *bar0 = nic->bar0;
6730         register u64 val64;
6731         u16 subid;
6732
6733         rtnl_lock();
6734
6735         if (!netif_running(dev))
6736                 goto out_unlock;
6737
6738         if (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(nic->state))) {
6739                 /* The card is being reset, no point doing anything */
6740                 goto out_unlock;
6741         }
6742
6743         subid = nic->pdev->subsystem_device;
6744         if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
6745                 /*
6746                  * Allow a small delay for the NICs self initiated
6747                  * cleanup to complete.
6748                  */
6749                 msleep(100);
6750         }
6751
6752         val64 = readq(&bar0->adapter_status);
6753         if (LINK_IS_UP(val64)) {
6754                 if (!(readq(&bar0->adapter_control) & ADAPTER_CNTL_EN)) {
6755                         if (verify_xena_quiescence(nic)) {
6756                                 val64 = readq(&bar0->adapter_control);
6757                                 val64 |= ADAPTER_CNTL_EN;
6758                                 writeq(val64, &bar0->adapter_control);
6759                                 if (CARDS_WITH_FAULTY_LINK_INDICATORS(
6760                                         nic->device_type, subid)) {
6761                                         val64 = readq(&bar0->gpio_control);
6762                                         val64 |= GPIO_CTRL_GPIO_0;
6763                                         writeq(val64, &bar0->gpio_control);
6764                                         val64 = readq(&bar0->gpio_control);
6765                                 } else {
6766                                         val64 |= ADAPTER_LED_ON;
6767                                         writeq(val64, &bar0->adapter_control);
6768                                 }
6769                                 nic->device_enabled_once = TRUE;
6770                         } else {
6771                                 DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);
6772                                 DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
6773                                 s2io_stop_all_tx_queue(nic);
6774                         }
6775                 }
6776                 val64 = readq(&bar0->adapter_control);
6777                 val64 |= ADAPTER_LED_ON;
6778                 writeq(val64, &bar0->adapter_control);
6779                 s2io_link(nic, LINK_UP);
6780         } else {
6781                 if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
6782                                                       subid)) {
6783                         val64 = readq(&bar0->gpio_control);
6784                         val64 &= ~GPIO_CTRL_GPIO_0;
6785                         writeq(val64, &bar0->gpio_control);
6786                         val64 = readq(&bar0->gpio_control);
6787                 }
6788                 /* turn off LED */
6789                 val64 = readq(&bar0->adapter_control);
6790                 val64 = val64 &(~ADAPTER_LED_ON);
6791                 writeq(val64, &bar0->adapter_control);
6792                 s2io_link(nic, LINK_DOWN);
6793         }
6794         clear_bit(__S2IO_STATE_LINK_TASK, &(nic->state));
6795
6796 out_unlock:
6797         rtnl_unlock();
6798 }
6799
6800 static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
6801                                 struct buffAdd *ba,
6802                                 struct sk_buff **skb, u64 *temp0, u64 *temp1,
6803                                 u64 *temp2, int size)
6804 {
6805         struct net_device *dev = sp->dev;
6806         struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
6807
6808         if ((sp->rxd_mode == RXD_MODE_1) && (rxdp->Host_Control == 0)) {
6809                 struct RxD1 *rxdp1 = (struct RxD1 *)rxdp;
6810                 /* allocate skb */
6811                 if (*skb) {
6812                         DBG_PRINT(INFO_DBG, "SKB is not NULL\n");
6813                         /*
6814                          * As Rx frame are not going to be processed,
6815                          * using same mapped address for the Rxd
6816                          * buffer pointer
6817                          */
6818                         rxdp1->Buffer0_ptr = *temp0;
6819                 } else {
6820                         *skb = dev_alloc_skb(size);
6821                         if (!(*skb)) {
6822                                 DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
6823                                 DBG_PRINT(INFO_DBG, "memory to allocate ");
6824                                 DBG_PRINT(INFO_DBG, "1 buf mode SKBs\n");
6825                                 sp->mac_control.stats_info->sw_stat. \
6826                                         mem_alloc_fail_cnt++;
6827                                 return -ENOMEM ;
6828                         }
6829                         sp->mac_control.stats_info->sw_stat.mem_allocated
6830                                 += (*skb)->truesize;
6831                         /* storing the mapped addr in a temp variable
6832                          * such it will be used for next rxd whose
6833                          * Host Control is NULL
6834                          */
6835                         rxdp1->Buffer0_ptr = *temp0 =
6836                                 pci_map_single( sp->pdev, (*skb)->data,
6837                                         size - NET_IP_ALIGN,
6838                                         PCI_DMA_FROMDEVICE);
6839                         if( (rxdp1->Buffer0_ptr == 0) ||
6840                                 (rxdp1->Buffer0_ptr == DMA_ERROR_CODE)) {
6841                                 goto memalloc_failed;
6842                         }
6843                         rxdp->Host_Control = (unsigned long) (*skb);
6844                 }
6845         } else if ((sp->rxd_mode == RXD_MODE_3B) && (rxdp->Host_Control == 0)) {
6846                 struct RxD3 *rxdp3 = (struct RxD3 *)rxdp;
6847                 /* Two buffer Mode */
6848                 if (*skb) {
6849                         rxdp3->Buffer2_ptr = *temp2;
6850                         rxdp3->Buffer0_ptr = *temp0;
6851                         rxdp3->Buffer1_ptr = *temp1;
6852                 } else {
6853                         *skb = dev_alloc_skb(size);
6854                         if (!(*skb)) {
6855                                 DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
6856                                 DBG_PRINT(INFO_DBG, "memory to allocate ");
6857                                 DBG_PRINT(INFO_DBG, "2 buf mode SKBs\n");
6858                                 sp->mac_control.stats_info->sw_stat. \
6859                                         mem_alloc_fail_cnt++;
6860                                 return -ENOMEM;
6861                         }
6862                         sp->mac_control.stats_info->sw_stat.mem_allocated
6863                                 += (*skb)->truesize;
6864                         rxdp3->Buffer2_ptr = *temp2 =
6865                                 pci_map_single(sp->pdev, (*skb)->data,
6866                                                dev->mtu + 4,
6867                                                PCI_DMA_FROMDEVICE);
6868                         if( (rxdp3->Buffer2_ptr == 0) ||
6869                                 (rxdp3->Buffer2_ptr == DMA_ERROR_CODE)) {
6870                                 goto memalloc_failed;
6871                         }
6872                         rxdp3->Buffer0_ptr = *temp0 =
6873                                 pci_map_single( sp->pdev, ba->ba_0, BUF0_LEN,
6874                                                 PCI_DMA_FROMDEVICE);
6875                         if( (rxdp3->Buffer0_ptr == 0) ||
6876                                 (rxdp3->Buffer0_ptr == DMA_ERROR_CODE)) {
6877                                 pci_unmap_single (sp->pdev,
6878                                         (dma_addr_t)rxdp3->Buffer2_ptr,
6879                                         dev->mtu + 4, PCI_DMA_FROMDEVICE);
6880                                 goto memalloc_failed;
6881                         }
6882                         rxdp->Host_Control = (unsigned long) (*skb);
6883
6884                         /* Buffer-1 will be dummy buffer not used */
6885                         rxdp3->Buffer1_ptr = *temp1 =
6886                                 pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN,
6887                                                 PCI_DMA_FROMDEVICE);
6888                         if( (rxdp3->Buffer1_ptr == 0) ||
6889                                 (rxdp3->Buffer1_ptr == DMA_ERROR_CODE)) {
6890                                 pci_unmap_single (sp->pdev,
6891                                         (dma_addr_t)rxdp3->Buffer0_ptr,
6892                                         BUF0_LEN, PCI_DMA_FROMDEVICE);
6893                                 pci_unmap_single (sp->pdev,
6894                                         (dma_addr_t)rxdp3->Buffer2_ptr,
6895                                         dev->mtu + 4, PCI_DMA_FROMDEVICE);
6896                                 goto memalloc_failed;
6897                         }
6898                 }
6899         }
6900         return 0;
6901         memalloc_failed:
6902                 stats->pci_map_fail_cnt++;
6903                 stats->mem_freed += (*skb)->truesize;
6904                 dev_kfree_skb(*skb);
6905                 return -ENOMEM;
6906 }
6907
6908 static void set_rxd_buffer_size(struct s2io_nic *sp, struct RxD_t *rxdp,
6909                                 int size)
6910 {
6911         struct net_device *dev = sp->dev;
6912         if (sp->rxd_mode == RXD_MODE_1) {
6913                 rxdp->Control_2 = SET_BUFFER0_SIZE_1( size - NET_IP_ALIGN);
6914         } else if (sp->rxd_mode == RXD_MODE_3B) {
6915                 rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
6916                 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
6917                 rxdp->Control_2 |= SET_BUFFER2_SIZE_3( dev->mtu + 4);
6918         }
6919 }
6920
6921 static  int rxd_owner_bit_reset(struct s2io_nic *sp)
6922 {
6923         int i, j, k, blk_cnt = 0, size;
6924         struct mac_info * mac_control = &sp->mac_control;
6925         struct config_param *config = &sp->config;
6926         struct net_device *dev = sp->dev;
6927         struct RxD_t *rxdp = NULL;
6928         struct sk_buff *skb = NULL;
6929         struct buffAdd *ba = NULL;
6930         u64 temp0_64 = 0, temp1_64 = 0, temp2_64 = 0;
6931
6932         /* Calculate the size based on ring mode */
6933         size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
6934                 HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
6935         if (sp->rxd_mode == RXD_MODE_1)
6936                 size += NET_IP_ALIGN;
6937         else if (sp->rxd_mode == RXD_MODE_3B)
6938                 size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4;
6939
6940         for (i = 0; i < config->rx_ring_num; i++) {
6941                 blk_cnt = config->rx_cfg[i].num_rxd /
6942                         (rxd_count[sp->rxd_mode] +1);
6943
6944                 for (j = 0; j < blk_cnt; j++) {
6945                         for (k = 0; k < rxd_count[sp->rxd_mode]; k++) {
6946                                 rxdp = mac_control->rings[i].
6947                                         rx_blocks[j].rxds[k].virt_addr;
6948                                 if(sp->rxd_mode == RXD_MODE_3B)
6949                                         ba = &mac_control->rings[i].ba[j][k];
6950                                 if (set_rxd_buffer_pointer(sp, rxdp, ba,
6951                                                        &skb,(u64 *)&temp0_64,
6952                                                        (u64 *)&temp1_64,
6953                                                        (u64 *)&temp2_64,
6954                                                         size) == ENOMEM) {
6955                                         return 0;
6956                                 }
6957
6958                                 set_rxd_buffer_size(sp, rxdp, size);
6959                                 wmb();
6960                                 /* flip the Ownership bit to Hardware */
6961                                 rxdp->Control_1 |= RXD_OWN_XENA;
6962                         }
6963                 }
6964         }
6965         return 0;
6966
6967 }
6968
6969 static int s2io_add_isr(struct s2io_nic * sp)
6970 {
6971         int ret = 0;
6972         struct net_device *dev = sp->dev;
6973         int err = 0;
6974
6975         if (sp->config.intr_type == MSI_X)
6976                 ret = s2io_enable_msi_x(sp);
6977         if (ret) {
6978                 DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
6979                 sp->config.intr_type = INTA;
6980         }
6981
6982         /* Store the values of the MSIX table in the struct s2io_nic structure */
6983         store_xmsi_data(sp);
6984
6985         /* After proper initialization of H/W, register ISR */
6986         if (sp->config.intr_type == MSI_X) {
6987                 int i, msix_tx_cnt=0,msix_rx_cnt=0;
6988
6989                 for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
6990                         if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
6991                                 sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
6992                                         dev->name, i);
6993                                 err = request_irq(sp->entries[i].vector,
6994                                           s2io_msix_fifo_handle, 0, sp->desc[i],
6995                                                   sp->s2io_entries[i].arg);
6996                                 /* If either data or addr is zero print it */
6997                                 if(!(sp->msix_info[i].addr &&
6998                                         sp->msix_info[i].data)) {
6999                                         DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
7000                                                 "Data:0x%llx\n",sp->desc[i],
7001                                                 (unsigned long long)
7002                                                 sp->msix_info[i].addr,
7003                                                 (unsigned long long)
7004                                                 sp->msix_info[i].data);
7005                                 } else {
7006                                         msix_tx_cnt++;
7007                                 }
7008                         } else {
7009                                 sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
7010                                         dev->name, i);
7011                                 err = request_irq(sp->entries[i].vector,
7012                                           s2io_msix_ring_handle, 0, sp->desc[i],
7013                                                   sp->s2io_entries[i].arg);
7014                                 /* If either data or addr is zero print it */
7015                                 if(!(sp->msix_info[i].addr &&
7016                                         sp->msix_info[i].data)) {
7017                                         DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
7018                                                 "Data:0x%llx\n",sp->desc[i],
7019                                                 (unsigned long long)
7020                                                 sp->msix_info[i].addr,
7021                                                 (unsigned long long)
7022                                                 sp->msix_info[i].data);
7023                                 } else {
7024                                         msix_rx_cnt++;
7025                                 }
7026                         }
7027                         if (err) {
7028                                 remove_msix_isr(sp);
7029                                 DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration "
7030                                           "failed\n", dev->name, i);
7031                                 DBG_PRINT(ERR_DBG, "%s: defaulting to INTA\n",
7032                                                  dev->name);
7033                                 sp->config.intr_type = INTA;
7034                                 break;
7035                         }
7036                         sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
7037                 }
7038                 if (!err) {
7039                         printk(KERN_INFO "MSI-X-TX %d entries enabled\n",
7040                                 msix_tx_cnt);
7041                         printk(KERN_INFO "MSI-X-RX %d entries enabled\n",
7042                                 msix_rx_cnt);
7043                 }
7044         }
7045         if (sp->config.intr_type == INTA) {
7046                 err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
7047                                 sp->name, dev);
7048                 if (err) {
7049                         DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
7050                                   dev->name);
7051                         return -1;
7052                 }
7053         }
7054         return 0;
7055 }
7056 static void s2io_rem_isr(struct s2io_nic * sp)
7057 {
7058         if (sp->config.intr_type == MSI_X)
7059                 remove_msix_isr(sp);
7060         else
7061                 remove_inta_isr(sp);
7062 }
7063
7064 static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
7065 {
7066         int cnt = 0;
7067         struct XENA_dev_config __iomem *bar0 = sp->bar0;
7068         register u64 val64 = 0;
7069         struct config_param *config;
7070         config = &sp->config;
7071
7072         if (!is_s2io_card_up(sp))
7073                 return;
7074
7075         del_timer_sync(&sp->alarm_timer);
7076         /* If s2io_set_link task is executing, wait till it completes. */
7077         while (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(sp->state))) {
7078                 msleep(50);
7079         }
7080         clear_bit(__S2IO_STATE_CARD_UP, &sp->state);
7081
7082         /* Disable napi */
7083         if (config->napi)
7084                 napi_disable(&sp->napi);
7085
7086         /* disable Tx and Rx traffic on the NIC */
7087         if (do_io)
7088                 stop_nic(sp);
7089
7090         s2io_rem_isr(sp);
7091
7092         /* Check if the device is Quiescent and then Reset the NIC */
7093         while(do_io) {
7094                 /* As per the HW requirement we need to replenish the
7095                  * receive buffer to avoid the ring bump. Since there is
7096                  * no intention of processing the Rx frame at this pointwe are
7097                  * just settting the ownership bit of rxd in Each Rx
7098                  * ring to HW and set the appropriate buffer size
7099                  * based on the ring mode
7100                  */
7101                 rxd_owner_bit_reset(sp);
7102
7103                 val64 = readq(&bar0->adapter_status);
7104                 if (verify_xena_quiescence(sp)) {
7105                         if(verify_pcc_quiescent(sp, sp->device_enabled_once))
7106                         break;
7107                 }
7108
7109                 msleep(50);
7110                 cnt++;
7111                 if (cnt == 10) {
7112                         DBG_PRINT(ERR_DBG,
7113                                   "s2io_close:Device not Quiescent ");
7114                         DBG_PRINT(ERR_DBG, "adaper status reads 0x%llx\n",
7115                                   (unsigned long long) val64);
7116                         break;
7117                 }
7118         }
7119         if (do_io)
7120                 s2io_reset(sp);
7121
7122         /* Free all Tx buffers */
7123         free_tx_buffers(sp);
7124
7125         /* Free all Rx buffers */
7126         free_rx_buffers(sp);
7127
7128         clear_bit(__S2IO_STATE_LINK_TASK, &(sp->state));
7129 }
7130
7131 static void s2io_card_down(struct s2io_nic * sp)
7132 {
7133         do_s2io_card_down(sp, 1);
7134 }
7135
7136 static int s2io_card_up(struct s2io_nic * sp)
7137 {
7138         int i, ret = 0;
7139         struct mac_info *mac_control;
7140         struct config_param *config;
7141         struct net_device *dev = (struct net_device *) sp->dev;
7142         u16 interruptible;
7143
7144         /* Initialize the H/W I/O registers */
7145         ret = init_nic(sp);
7146         if (ret != 0) {
7147                 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
7148                           dev->name);
7149                 if (ret != -EIO)
7150                         s2io_reset(sp);
7151                 return ret;
7152         }
7153
7154         /*
7155          * Initializing the Rx buffers. For now we are considering only 1
7156          * Rx ring and initializing buffers into 30 Rx blocks
7157          */
7158         mac_control = &sp->mac_control;
7159         config = &sp->config;
7160
7161         for (i = 0; i < config->rx_ring_num; i++) {
7162                 mac_control->rings[i].mtu = dev->mtu;
7163                 ret = fill_rx_buffers(&mac_control->rings[i]);
7164                 if (ret) {
7165                         DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
7166                                   dev->name);
7167                         s2io_reset(sp);
7168                         free_rx_buffers(sp);
7169                         return -ENOMEM;
7170                 }
7171                 DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
7172                           mac_control->rings[i].rx_bufs_left);
7173         }
7174
7175         /* Initialise napi */
7176         if (config->napi)
7177                 napi_enable(&sp->napi);
7178
7179         /* Maintain the state prior to the open */
7180         if (sp->promisc_flg)
7181                 sp->promisc_flg = 0;
7182         if (sp->m_cast_flg) {
7183                 sp->m_cast_flg = 0;
7184                 sp->all_multi_pos= 0;
7185         }
7186
7187         /* Setting its receive mode */
7188         s2io_set_multicast(dev);
7189
7190         if (sp->lro) {
7191                 /* Initialize max aggregatable pkts per session based on MTU */
7192                 sp->lro_max_aggr_per_sess = ((1<<16) - 1) / dev->mtu;
7193                 /* Check if we can use(if specified) user provided value */
7194                 if (lro_max_pkts < sp->lro_max_aggr_per_sess)
7195                         sp->lro_max_aggr_per_sess = lro_max_pkts;
7196         }
7197
7198         /* Enable Rx Traffic and interrupts on the NIC */
7199         if (start_nic(sp)) {
7200                 DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
7201                 s2io_reset(sp);
7202                 free_rx_buffers(sp);
7203                 return -ENODEV;
7204         }
7205
7206         /* Add interrupt service routine */
7207         if (s2io_add_isr(sp) != 0) {
7208                 if (sp->config.intr_type == MSI_X)
7209                         s2io_rem_isr(sp);
7210                 s2io_reset(sp);
7211                 free_rx_buffers(sp);
7212                 return -ENODEV;
7213         }
7214
7215         S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
7216
7217         /*  Enable select interrupts */
7218         en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
7219         if (sp->config.intr_type != INTA)
7220                 en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS);
7221         else {
7222                 interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
7223                 interruptible |= TX_PIC_INTR;
7224                 en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
7225         }
7226
7227         set_bit(__S2IO_STATE_CARD_UP, &sp->state);
7228         return 0;
7229 }
7230
7231 /**
7232  * s2io_restart_nic - Resets the NIC.
7233  * @data : long pointer to the device private structure
7234  * Description:
7235  * This function is scheduled to be run by the s2io_tx_watchdog
7236  * function after 0.5 secs to reset the NIC. The idea is to reduce
7237  * the run time of the watch dog routine which is run holding a
7238  * spin lock.
7239  */
7240
7241 static void s2io_restart_nic(struct work_struct *work)
7242 {
7243         struct s2io_nic *sp = container_of(work, struct s2io_nic, rst_timer_task);
7244         struct net_device *dev = sp->dev;
7245
7246         rtnl_lock();
7247
7248         if (!netif_running(dev))
7249                 goto out_unlock;
7250
7251         s2io_card_down(sp);
7252         if (s2io_card_up(sp)) {
7253                 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
7254                           dev->name);
7255         }
7256         s2io_wake_all_tx_queue(sp);
7257         DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n",
7258                   dev->name);
7259 out_unlock:
7260         rtnl_unlock();
7261 }
7262
7263 /**
7264  *  s2io_tx_watchdog - Watchdog for transmit side.
7265  *  @dev : Pointer to net device structure
7266  *  Description:
7267  *  This function is triggered if the Tx Queue is stopped
7268  *  for a pre-defined amount of time when the Interface is still up.
7269  *  If the Interface is jammed in such a situation, the hardware is
7270  *  reset (by s2io_close) and restarted again (by s2io_open) to
7271  *  overcome any problem that might have been caused in the hardware.
7272  *  Return value:
7273  *  void
7274  */
7275
7276 static void s2io_tx_watchdog(struct net_device *dev)
7277 {
7278         struct s2io_nic *sp = dev->priv;
7279
7280         if (netif_carrier_ok(dev)) {
7281                 sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt++;
7282                 schedule_work(&sp->rst_timer_task);
7283                 sp->mac_control.stats_info->sw_stat.soft_reset_cnt++;
7284         }
7285 }
7286
7287 /**
7288  *   rx_osm_handler - To perform some OS related operations on SKB.
7289  *   @sp: private member of the device structure,pointer to s2io_nic structure.
7290  *   @skb : the socket buffer pointer.
7291  *   @len : length of the packet
7292  *   @cksum : FCS checksum of the frame.
7293  *   @ring_no : the ring from which this RxD was extracted.
7294  *   Description:
7295  *   This function is called by the Rx interrupt serivce routine to perform
7296  *   some OS related operations on the SKB before passing it to the upper
7297  *   layers. It mainly checks if the checksum is OK, if so adds it to the
7298  *   SKBs cksum variable, increments the Rx packet count and passes the SKB
7299  *   to the upper layer. If the checksum is wrong, it increments the Rx
7300  *   packet error count, frees the SKB and returns error.
7301  *   Return value:
7302  *   SUCCESS on success and -1 on failure.
7303  */
7304 static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
7305 {
7306         struct s2io_nic *sp = ring_data->nic;
7307         struct net_device *dev = (struct net_device *) ring_data->dev;
7308         struct sk_buff *skb = (struct sk_buff *)
7309                 ((unsigned long) rxdp->Host_Control);
7310         int ring_no = ring_data->ring_no;
7311         u16 l3_csum, l4_csum;
7312         unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
7313         struct lro *lro;
7314         u8 err_mask;
7315
7316         skb->dev = dev;
7317
7318         if (err) {
7319                 /* Check for parity error */
7320                 if (err & 0x1) {
7321                         sp->mac_control.stats_info->sw_stat.parity_err_cnt++;
7322                 }
7323                 err_mask = err >> 48;
7324                 switch(err_mask) {
7325                         case 1:
7326                                 sp->mac_control.stats_info->sw_stat.
7327                                 rx_parity_err_cnt++;
7328                         break;
7329
7330                         case 2:
7331                                 sp->mac_control.stats_info->sw_stat.
7332                                 rx_abort_cnt++;
7333                         break;
7334
7335                         case 3:
7336                                 sp->mac_control.stats_info->sw_stat.
7337                                 rx_parity_abort_cnt++;
7338                         break;
7339
7340                         case 4:
7341                                 sp->mac_control.stats_info->sw_stat.
7342                                 rx_rda_fail_cnt++;
7343                         break;
7344
7345                         case 5:
7346                                 sp->mac_control.stats_info->sw_stat.
7347                                 rx_unkn_prot_cnt++;
7348                         break;
7349
7350                         case 6:
7351                                 sp->mac_control.stats_info->sw_stat.
7352                                 rx_fcs_err_cnt++;
7353                         break;
7354
7355                         case 7:
7356                                 sp->mac_control.stats_info->sw_stat.
7357                                 rx_buf_size_err_cnt++;
7358                         break;
7359
7360                         case 8:
7361                                 sp->mac_control.stats_info->sw_stat.
7362                                 rx_rxd_corrupt_cnt++;
7363                         break;
7364
7365                         case 15:
7366                                 sp->mac_control.stats_info->sw_stat.
7367                                 rx_unkn_err_cnt++;
7368                         break;
7369                 }
7370                 /*
7371                 * Drop the packet if bad transfer code. Exception being
7372                 * 0x5, which could be due to unsupported IPv6 extension header.
7373                 * In this case, we let stack handle the packet.
7374                 * Note that in this case, since checksum will be incorrect,
7375                 * stack will validate the same.
7376                 */
7377                 if (err_mask != 0x5) {
7378                         DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",
7379                                 dev->name, err_mask);
7380                         sp->stats.rx_crc_errors++;
7381                         sp->mac_control.stats_info->sw_stat.mem_freed
7382                                 += skb->truesize;
7383                         dev_kfree_skb(skb);
7384                         ring_data->rx_bufs_left -= 1;
7385                         rxdp->Host_Control = 0;
7386                         return 0;
7387                 }
7388         }
7389
7390         /* Updating statistics */
7391         ring_data->rx_packets++;
7392         rxdp->Host_Control = 0;
7393         if (sp->rxd_mode == RXD_MODE_1) {
7394                 int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2);
7395
7396                 ring_data->rx_bytes += len;
7397                 skb_put(skb, len);
7398
7399         } else if (sp->rxd_mode == RXD_MODE_3B) {
7400                 int get_block = ring_data->rx_curr_get_info.block_index;
7401                 int get_off = ring_data->rx_curr_get_info.offset;
7402                 int buf0_len = RXD_GET_BUFFER0_SIZE_3(rxdp->Control_2);
7403                 int buf2_len = RXD_GET_BUFFER2_SIZE_3(rxdp->Control_2);
7404                 unsigned char *buff = skb_push(skb, buf0_len);
7405
7406                 struct buffAdd *ba = &ring_data->ba[get_block][get_off];
7407                 ring_data->rx_bytes += buf0_len + buf2_len;
7408                 memcpy(buff, ba->ba_0, buf0_len);
7409                 skb_put(skb, buf2_len);
7410         }
7411
7412         if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && ((!ring_data->lro) ||
7413             (ring_data->lro && (!(rxdp->Control_1 & RXD_FRAME_IP_FRAG)))) &&
7414             (sp->rx_csum)) {
7415                 l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
7416                 l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
7417                 if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
7418                         /*
7419                          * NIC verifies if the Checksum of the received
7420                          * frame is Ok or not and accordingly returns
7421                          * a flag in the RxD.
7422                          */
7423                         skb->ip_summed = CHECKSUM_UNNECESSARY;
7424                         if (ring_data->lro) {
7425                                 u32 tcp_len;
7426                                 u8 *tcp;
7427                                 int ret = 0;
7428
7429                                 ret = s2io_club_tcp_session(ring_data,
7430                                         skb->data, &tcp, &tcp_len, &lro,
7431                                         rxdp, sp);
7432                                 switch (ret) {
7433                                         case 3: /* Begin anew */
7434                                                 lro->parent = skb;
7435                                                 goto aggregate;
7436                                         case 1: /* Aggregate */
7437                                         {
7438                                                 lro_append_pkt(sp, lro,
7439                                                         skb, tcp_len);
7440                                                 goto aggregate;
7441                                         }
7442                                         case 4: /* Flush session */
7443                                         {
7444                                                 lro_append_pkt(sp, lro,
7445                                                         skb, tcp_len);
7446                                                 queue_rx_frame(lro->parent,
7447                                                         lro->vlan_tag);
7448                                                 clear_lro_session(lro);
7449                                                 sp->mac_control.stats_info->
7450                                                     sw_stat.flush_max_pkts++;
7451                                                 goto aggregate;
7452                                         }
7453                                         case 2: /* Flush both */
7454                                                 lro->parent->data_len =
7455                                                         lro->frags_len;
7456                                                 sp->mac_control.stats_info->
7457                                                      sw_stat.sending_both++;
7458                                                 queue_rx_frame(lro->parent,
7459                                                         lro->vlan_tag);
7460                                                 clear_lro_session(lro);
7461                                                 goto send_up;
7462                                         case 0: /* sessions exceeded */
7463                                         case -1: /* non-TCP or not
7464                                                   * L2 aggregatable
7465                                                   */
7466                                         case 5: /*
7467                                                  * First pkt in session not
7468                                                  * L3/L4 aggregatable
7469                                                  */
7470                                                 break;
7471                                         default:
7472                                                 DBG_PRINT(ERR_DBG,
7473                                                         "%s: Samadhana!!\n",
7474                                                          __FUNCTION__);
7475                                                 BUG();
7476                                 }
7477                         }
7478                 } else {
7479                         /*
7480                          * Packet with erroneous checksum, let the
7481                          * upper layers deal with it.
7482                          */
7483                         skb->ip_summed = CHECKSUM_NONE;
7484                 }
7485         } else
7486                 skb->ip_summed = CHECKSUM_NONE;
7487
7488         sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
7489 send_up:
7490         queue_rx_frame(skb, RXD_GET_VLAN_TAG(rxdp->Control_2));
7491         dev->last_rx = jiffies;
7492 aggregate:
7493         sp->mac_control.rings[ring_no].rx_bufs_left -= 1;
7494         return SUCCESS;
7495 }
7496
7497 /**
7498  *  s2io_link - stops/starts the Tx queue.
7499  *  @sp : private member of the device structure, which is a pointer to the
7500  *  s2io_nic structure.
7501  *  @link : inidicates whether link is UP/DOWN.
7502  *  Description:
7503  *  This function stops/starts the Tx queue depending on whether the link
7504  *  status of the NIC is is down or up. This is called by the Alarm
7505  *  interrupt handler whenever a link change interrupt comes up.
7506  *  Return value:
7507  *  void.
7508  */
7509
7510 static void s2io_link(struct s2io_nic * sp, int link)
7511 {
7512         struct net_device *dev = (struct net_device *) sp->dev;
7513
7514         if (link != sp->last_link_state) {
7515                 init_tti(sp, link);
7516                 if (link == LINK_DOWN) {
7517                         DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
7518                         s2io_stop_all_tx_queue(sp);
7519                         netif_carrier_off(dev);
7520                         if(sp->mac_control.stats_info->sw_stat.link_up_cnt)
7521                         sp->mac_control.stats_info->sw_stat.link_up_time =
7522                                 jiffies - sp->start_time;
7523                         sp->mac_control.stats_info->sw_stat.link_down_cnt++;
7524                 } else {
7525                         DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);
7526                         if (sp->mac_control.stats_info->sw_stat.link_down_cnt)
7527                         sp->mac_control.stats_info->sw_stat.link_down_time =
7528                                 jiffies - sp->start_time;
7529                         sp->mac_control.stats_info->sw_stat.link_up_cnt++;
7530                         netif_carrier_on(dev);
7531                         s2io_wake_all_tx_queue(sp);
7532                 }
7533         }
7534         sp->last_link_state = link;
7535         sp->start_time = jiffies;
7536 }
7537
7538 /**
7539  *  s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
7540  *  @sp : private member of the device structure, which is a pointer to the
7541  *  s2io_nic structure.
7542  *  Description:
7543  *  This function initializes a few of the PCI and PCI-X configuration registers
7544  *  with recommended values.
7545  *  Return value:
7546  *  void
7547  */
7548
7549 static void s2io_init_pci(struct s2io_nic * sp)
7550 {
7551         u16 pci_cmd = 0, pcix_cmd = 0;
7552
7553         /* Enable Data Parity Error Recovery in PCI-X command register. */
7554         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7555                              &(pcix_cmd));
7556         pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7557                               (pcix_cmd | 1));
7558         pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7559                              &(pcix_cmd));
7560
7561         /* Set the PErr Response bit in PCI command register. */
7562         pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
7563         pci_write_config_word(sp->pdev, PCI_COMMAND,
7564                               (pci_cmd | PCI_COMMAND_PARITY));
7565         pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
7566 }
7567
7568 static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
7569         u8 *dev_multiq)
7570 {
7571         if ((tx_fifo_num > MAX_TX_FIFOS) ||
7572                 (tx_fifo_num < 1)) {
7573                 DBG_PRINT(ERR_DBG, "s2io: Requested number of tx fifos "
7574                         "(%d) not supported\n", tx_fifo_num);
7575
7576                 if (tx_fifo_num < 1)
7577                         tx_fifo_num = 1;
7578                 else
7579                         tx_fifo_num = MAX_TX_FIFOS;
7580
7581                 DBG_PRINT(ERR_DBG, "s2io: Default to %d ", tx_fifo_num);
7582                 DBG_PRINT(ERR_DBG, "tx fifos\n");
7583         }
7584
7585 #ifndef CONFIG_NETDEVICES_MULTIQUEUE
7586         if (multiq) {
7587                 DBG_PRINT(ERR_DBG, "s2io: Multiqueue support not enabled\n");
7588                 multiq = 0;
7589         }
7590 #endif
7591         if (multiq)
7592                 *dev_multiq = multiq;
7593
7594         if (tx_steering_type && (1 == tx_fifo_num)) {
7595                 if (tx_steering_type != TX_DEFAULT_STEERING)
7596                         DBG_PRINT(ERR_DBG,
7597                                 "s2io: Tx steering is not supported with "
7598                                 "one fifo. Disabling Tx steering.\n");
7599                 tx_steering_type = NO_STEERING;
7600         }
7601
7602         if ((tx_steering_type < NO_STEERING) ||
7603                 (tx_steering_type > TX_DEFAULT_STEERING)) {
7604                 DBG_PRINT(ERR_DBG, "s2io: Requested transmit steering not "
7605                          "supported\n");
7606                 DBG_PRINT(ERR_DBG, "s2io: Disabling transmit steering\n");
7607                 tx_steering_type = NO_STEERING;
7608         }
7609
7610         if (rx_ring_num > MAX_RX_RINGS) {
7611                 DBG_PRINT(ERR_DBG, "s2io: Requested number of rx rings not "
7612                          "supported\n");
7613                 DBG_PRINT(ERR_DBG, "s2io: Default to %d rx rings\n",
7614                         MAX_RX_RINGS);
7615                 rx_ring_num = MAX_RX_RINGS;
7616         }
7617
7618         if (*dev_intr_type != INTA)
7619                 napi = 0;
7620
7621         if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) {
7622                 DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. "
7623                           "Defaulting to INTA\n");
7624                 *dev_intr_type = INTA;
7625         }
7626
7627         if ((*dev_intr_type == MSI_X) &&
7628                         ((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
7629                         (pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
7630                 DBG_PRINT(ERR_DBG, "s2io: Xframe I does not support MSI_X. "
7631                                         "Defaulting to INTA\n");
7632                 *dev_intr_type = INTA;
7633         }
7634
7635         if ((rx_ring_mode != 1) && (rx_ring_mode != 2)) {
7636                 DBG_PRINT(ERR_DBG, "s2io: Requested ring mode not supported\n");
7637                 DBG_PRINT(ERR_DBG, "s2io: Defaulting to 1-buffer mode\n");
7638                 rx_ring_mode = 1;
7639         }
7640         return SUCCESS;
7641 }
7642
7643 /**
7644  * rts_ds_steer - Receive traffic steering based on IPv4 or IPv6 TOS
7645  * or Traffic class respectively.
7646  * @nic: device private variable
7647  * Description: The function configures the receive steering to
7648  * desired receive ring.
7649  * Return Value:  SUCCESS on success and
7650  * '-1' on failure (endian settings incorrect).
7651  */
7652 static int rts_ds_steer(struct s2io_nic *nic, u8 ds_codepoint, u8 ring)
7653 {
7654         struct XENA_dev_config __iomem *bar0 = nic->bar0;
7655         register u64 val64 = 0;
7656
7657         if (ds_codepoint > 63)
7658                 return FAILURE;
7659
7660         val64 = RTS_DS_MEM_DATA(ring);
7661         writeq(val64, &bar0->rts_ds_mem_data);
7662
7663         val64 = RTS_DS_MEM_CTRL_WE |
7664                 RTS_DS_MEM_CTRL_STROBE_NEW_CMD |
7665                 RTS_DS_MEM_CTRL_OFFSET(ds_codepoint);
7666
7667         writeq(val64, &bar0->rts_ds_mem_ctrl);
7668
7669         return wait_for_cmd_complete(&bar0->rts_ds_mem_ctrl,
7670                                 RTS_DS_MEM_CTRL_STROBE_CMD_BEING_EXECUTED,
7671                                 S2IO_BIT_RESET);
7672 }
7673
7674 /**
7675  *  s2io_init_nic - Initialization of the adapter .
7676  *  @pdev : structure containing the PCI related information of the device.
7677  *  @pre: List of PCI devices supported by the driver listed in s2io_tbl.
7678  *  Description:
7679  *  The function initializes an adapter identified by the pci_dec structure.
7680  *  All OS related initialization including memory and device structure and
7681  *  initlaization of the device private variable is done. Also the swapper
7682  *  control register is initialized to enable read and write into the I/O
7683  *  registers of the device.
7684  *  Return value:
7685  *  returns 0 on success and negative on failure.
7686  */
7687
7688 static int __devinit
7689 s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
7690 {
7691         struct s2io_nic *sp;
7692         struct net_device *dev;
7693         int i, j, ret;
7694         int dma_flag = FALSE;
7695         u32 mac_up, mac_down;
7696         u64 val64 = 0, tmp64 = 0;
7697         struct XENA_dev_config __iomem *bar0 = NULL;
7698         u16 subid;
7699         struct mac_info *mac_control;
7700         struct config_param *config;
7701         int mode;
7702         u8 dev_intr_type = intr_type;
7703         u8 dev_multiq = 0;
7704         DECLARE_MAC_BUF(mac);
7705
7706         ret = s2io_verify_parm(pdev, &dev_intr_type, &dev_multiq);
7707         if (ret)
7708                 return ret;
7709
7710         if ((ret = pci_enable_device(pdev))) {
7711                 DBG_PRINT(ERR_DBG,
7712                           "s2io_init_nic: pci_enable_device failed\n");
7713                 return ret;
7714         }
7715
7716         if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
7717                 DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
7718                 dma_flag = TRUE;
7719                 if (pci_set_consistent_dma_mask
7720                     (pdev, DMA_64BIT_MASK)) {
7721                         DBG_PRINT(ERR_DBG,
7722                                   "Unable to obtain 64bit DMA for \
7723                                         consistent allocations\n");
7724                         pci_disable_device(pdev);
7725                         return -ENOMEM;
7726                 }
7727         } else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
7728                 DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 32bit DMA\n");
7729         } else {
7730                 pci_disable_device(pdev);
7731                 return -ENOMEM;
7732         }
7733         if ((ret = pci_request_regions(pdev, s2io_driver_name))) {
7734                 DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x \n", __FUNCTION__, ret);
7735                 pci_disable_device(pdev);
7736                 return -ENODEV;
7737         }
7738 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
7739         if (dev_multiq)
7740                 dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num);
7741         else
7742 #endif
7743         dev = alloc_etherdev(sizeof(struct s2io_nic));
7744         if (dev == NULL) {
7745                 DBG_PRINT(ERR_DBG, "Device allocation failed\n");
7746                 pci_disable_device(pdev);
7747                 pci_release_regions(pdev);
7748                 return -ENODEV;
7749         }
7750
7751         pci_set_master(pdev);
7752         pci_set_drvdata(pdev, dev);
7753         SET_NETDEV_DEV(dev, &pdev->dev);
7754
7755         /*  Private member variable initialized to s2io NIC structure */
7756         sp = dev->priv;
7757         memset(sp, 0, sizeof(struct s2io_nic));
7758         sp->dev = dev;
7759         sp->pdev = pdev;
7760         sp->high_dma_flag = dma_flag;
7761         sp->device_enabled_once = FALSE;
7762         if (rx_ring_mode == 1)
7763                 sp->rxd_mode = RXD_MODE_1;
7764         if (rx_ring_mode == 2)
7765                 sp->rxd_mode = RXD_MODE_3B;
7766
7767         sp->config.intr_type = dev_intr_type;
7768
7769         if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
7770                 (pdev->device == PCI_DEVICE_ID_HERC_UNI))
7771                 sp->device_type = XFRAME_II_DEVICE;
7772         else
7773                 sp->device_type = XFRAME_I_DEVICE;
7774
7775         sp->lro = lro_enable;
7776
7777         /* Initialize some PCI/PCI-X fields of the NIC. */
7778         s2io_init_pci(sp);
7779
7780         /*
7781          * Setting the device configuration parameters.
7782          * Most of these parameters can be specified by the user during
7783          * module insertion as they are module loadable parameters. If
7784          * these parameters are not not specified during load time, they
7785          * are initialized with default values.
7786          */
7787         mac_control = &sp->mac_control;
7788         config = &sp->config;
7789
7790         config->napi = napi;
7791         config->tx_steering_type = tx_steering_type;
7792
7793         /* Tx side parameters. */
7794         if (config->tx_steering_type == TX_PRIORITY_STEERING)
7795                 config->tx_fifo_num = MAX_TX_FIFOS;
7796         else
7797                 config->tx_fifo_num = tx_fifo_num;
7798
7799         /* Initialize the fifos used for tx steering */
7800         if (config->tx_fifo_num < 5) {
7801                         if (config->tx_fifo_num  == 1)
7802                                 sp->total_tcp_fifos = 1;
7803                         else
7804                                 sp->total_tcp_fifos = config->tx_fifo_num - 1;
7805                         sp->udp_fifo_idx = config->tx_fifo_num - 1;
7806                         sp->total_udp_fifos = 1;
7807                         sp->other_fifo_idx = sp->total_tcp_fifos - 1;
7808         } else {
7809                 sp->total_tcp_fifos = (tx_fifo_num - FIFO_UDP_MAX_NUM -
7810                                                 FIFO_OTHER_MAX_NUM);
7811                 sp->udp_fifo_idx = sp->total_tcp_fifos;
7812                 sp->total_udp_fifos = FIFO_UDP_MAX_NUM;
7813                 sp->other_fifo_idx = sp->udp_fifo_idx + FIFO_UDP_MAX_NUM;
7814         }
7815
7816         config->multiq = dev_multiq;
7817         for (i = 0; i < config->tx_fifo_num; i++) {
7818                 config->tx_cfg[i].fifo_len = tx_fifo_len[i];
7819                 config->tx_cfg[i].fifo_priority = i;
7820         }
7821
7822         /* mapping the QoS priority to the configured fifos */
7823         for (i = 0; i < MAX_TX_FIFOS; i++)
7824                 config->fifo_mapping[i] = fifo_map[config->tx_fifo_num - 1][i];
7825
7826         /* map the hashing selector table to the configured fifos */
7827         for (i = 0; i < config->tx_fifo_num; i++)
7828                 sp->fifo_selector[i] = fifo_selector[i];
7829
7830
7831         config->tx_intr_type = TXD_INT_TYPE_UTILZ;
7832         for (i = 0; i < config->tx_fifo_num; i++) {
7833                 config->tx_cfg[i].f_no_snoop =
7834                     (NO_SNOOP_TXD | NO_SNOOP_TXD_BUFFER);
7835                 if (config->tx_cfg[i].fifo_len < 65) {
7836                         config->tx_intr_type = TXD_INT_TYPE_PER_LIST;
7837                         break;
7838                 }
7839         }
7840         /* + 2 because one Txd for skb->data and one Txd for UFO */
7841         config->max_txds = MAX_SKB_FRAGS + 2;
7842
7843         /* Rx side parameters. */
7844         config->rx_ring_num = rx_ring_num;
7845         for (i = 0; i < config->rx_ring_num; i++) {
7846                 config->rx_cfg[i].num_rxd = rx_ring_sz[i] *
7847                     (rxd_count[sp->rxd_mode] + 1);
7848                 config->rx_cfg[i].ring_priority = i;
7849                 mac_control->rings[i].rx_bufs_left = 0;
7850                 mac_control->rings[i].rxd_mode = sp->rxd_mode;
7851                 mac_control->rings[i].rxd_count = rxd_count[sp->rxd_mode];
7852                 mac_control->rings[i].pdev = sp->pdev;
7853                 mac_control->rings[i].dev = sp->dev;
7854         }
7855
7856         for (i = 0; i < rx_ring_num; i++) {
7857                 config->rx_cfg[i].ring_org = RING_ORG_BUFF1;
7858                 config->rx_cfg[i].f_no_snoop =
7859                     (NO_SNOOP_RXD | NO_SNOOP_RXD_BUFFER);
7860         }
7861
7862         /*  Setting Mac Control parameters */
7863         mac_control->rmac_pause_time = rmac_pause_time;
7864         mac_control->mc_pause_threshold_q0q3 = mc_pause_threshold_q0q3;
7865         mac_control->mc_pause_threshold_q4q7 = mc_pause_threshold_q4q7;
7866
7867
7868         /*  initialize the shared memory used by the NIC and the host */
7869         if (init_shared_mem(sp)) {
7870                 DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n",
7871                           dev->name);
7872                 ret = -ENOMEM;
7873                 goto mem_alloc_failed;
7874         }
7875
7876         sp->bar0 = ioremap(pci_resource_start(pdev, 0),
7877                                      pci_resource_len(pdev, 0));
7878         if (!sp->bar0) {
7879                 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",
7880                           dev->name);
7881                 ret = -ENOMEM;
7882                 goto bar0_remap_failed;
7883         }
7884
7885         sp->bar1 = ioremap(pci_resource_start(pdev, 2),
7886                                      pci_resource_len(pdev, 2));
7887         if (!sp->bar1) {
7888                 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",
7889                           dev->name);
7890                 ret = -ENOMEM;
7891                 goto bar1_remap_failed;
7892         }
7893
7894         dev->irq = pdev->irq;
7895         dev->base_addr = (unsigned long) sp->bar0;
7896
7897         /* Initializing the BAR1 address as the start of the FIFO pointer. */
7898         for (j = 0; j < MAX_TX_FIFOS; j++) {
7899                 mac_control->tx_FIFO_start[j] = (struct TxFIFO_element __iomem *)
7900                     (sp->bar1 + (j * 0x00020000));
7901         }
7902
7903         /*  Driver entry points */
7904         dev->open = &s2io_open;
7905         dev->stop = &s2io_close;
7906         dev->hard_start_xmit = &s2io_xmit;
7907         dev->get_stats = &s2io_get_stats;
7908         dev->set_multicast_list = &s2io_set_multicast;
7909         dev->do_ioctl = &s2io_ioctl;
7910         dev->set_mac_address = &s2io_set_mac_addr;
7911         dev->change_mtu = &s2io_change_mtu;
7912         SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
7913         dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
7914         dev->vlan_rx_register = s2io_vlan_rx_register;
7915         dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid;
7916
7917         /*
7918          * will use eth_mac_addr() for  dev->set_mac_address
7919          * mac address will be set every time dev->open() is called
7920          */
7921         netif_napi_add(dev, &sp->napi, s2io_poll, 32);
7922
7923 #ifdef CONFIG_NET_POLL_CONTROLLER
7924         dev->poll_controller = s2io_netpoll;
7925 #endif
7926
7927         dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
7928         if (sp->high_dma_flag == TRUE)
7929                 dev->features |= NETIF_F_HIGHDMA;
7930         dev->features |= NETIF_F_TSO;
7931         dev->features |= NETIF_F_TSO6;
7932         if ((sp->device_type & XFRAME_II_DEVICE) && (ufo))  {
7933                 dev->features |= NETIF_F_UFO;
7934                 dev->features |= NETIF_F_HW_CSUM;
7935         }
7936 #ifdef CONFIG_NETDEVICES_MULTIQUEUE
7937         if (config->multiq)
7938                 dev->features |= NETIF_F_MULTI_QUEUE;
7939 #endif
7940         dev->tx_timeout = &s2io_tx_watchdog;
7941         dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
7942         INIT_WORK(&sp->rst_timer_task, s2io_restart_nic);
7943         INIT_WORK(&sp->set_link_task, s2io_set_link);
7944
7945         pci_save_state(sp->pdev);
7946
7947         /* Setting swapper control on the NIC, for proper reset operation */
7948         if (s2io_set_swapper(sp)) {
7949                 DBG_PRINT(ERR_DBG, "%s:swapper settings are wrong\n",
7950                           dev->name);
7951                 ret = -EAGAIN;
7952                 goto set_swap_failed;
7953         }
7954
7955         /* Verify if the Herc works on the slot its placed into */
7956         if (sp->device_type & XFRAME_II_DEVICE) {
7957                 mode = s2io_verify_pci_mode(sp);
7958                 if (mode < 0) {
7959                         DBG_PRINT(ERR_DBG, "%s: ", __FUNCTION__);
7960                         DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
7961                         ret = -EBADSLT;
7962                         goto set_swap_failed;
7963                 }
7964         }
7965
7966         /* Not needed for Herc */
7967         if (sp->device_type & XFRAME_I_DEVICE) {
7968                 /*
7969                  * Fix for all "FFs" MAC address problems observed on
7970                  * Alpha platforms
7971                  */
7972                 fix_mac_address(sp);
7973                 s2io_reset(sp);
7974         }
7975
7976         /*
7977          * MAC address initialization.
7978          * For now only one mac address will be read and used.
7979          */
7980         bar0 = sp->bar0;
7981         val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
7982             RMAC_ADDR_CMD_MEM_OFFSET(0 + S2IO_MAC_ADDR_START_OFFSET);
7983         writeq(val64, &bar0->rmac_addr_cmd_mem);
7984         wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
7985                       RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, S2IO_BIT_RESET);
7986         tmp64 = readq(&bar0->rmac_addr_data0_mem);
7987         mac_down = (u32) tmp64;
7988         mac_up = (u32) (tmp64 >> 32);
7989
7990         sp->def_mac_addr[0].mac_addr[3] = (u8) (mac_up);
7991         sp->def_mac_addr[0].mac_addr[2] = (u8) (mac_up >> 8);
7992         sp->def_mac_addr[0].mac_addr[1] = (u8) (mac_up >> 16);
7993         sp->def_mac_addr[0].mac_addr[0] = (u8) (mac_up >> 24);
7994         sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16);
7995         sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24);
7996
7997         /*  Set the factory defined MAC address initially   */
7998         dev->addr_len = ETH_ALEN;
7999         memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
8000         memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
8001
8002         /* initialize number of multicast & unicast MAC entries variables */
8003         if (sp->device_type == XFRAME_I_DEVICE) {
8004                 config->max_mc_addr = S2IO_XENA_MAX_MC_ADDRESSES;
8005                 config->max_mac_addr = S2IO_XENA_MAX_MAC_ADDRESSES;
8006                 config->mc_start_offset = S2IO_XENA_MC_ADDR_START_OFFSET;
8007         } else if (sp->device_type == XFRAME_II_DEVICE) {
8008                 config->max_mc_addr = S2IO_HERC_MAX_MC_ADDRESSES;
8009                 config->max_mac_addr = S2IO_HERC_MAX_MAC_ADDRESSES;
8010                 config->mc_start_offset = S2IO_HERC_MC_ADDR_START_OFFSET;
8011         }
8012
8013         /* store mac addresses from CAM to s2io_nic structure */
8014         do_s2io_store_unicast_mc(sp);
8015
8016          /* Store the values of the MSIX table in the s2io_nic structure */
8017         store_xmsi_data(sp);
8018         /* reset Nic and bring it to known state */
8019         s2io_reset(sp);
8020
8021         /*
8022          * Initialize link state flags
8023          * and the card state parameter
8024          */
8025         sp->state = 0;
8026
8027         /* Initialize spinlocks */
8028         for (i = 0; i < sp->config.tx_fifo_num; i++)
8029                 spin_lock_init(&mac_control->fifos[i].tx_lock);
8030
8031         /*
8032          * SXE-002: Configure link and activity LED to init state
8033          * on driver load.
8034          */
8035         subid = sp->pdev->subsystem_device;
8036         if ((subid & 0xFF) >= 0x07) {
8037                 val64 = readq(&bar0->gpio_control);
8038                 val64 |= 0x0000800000000000ULL;
8039                 writeq(val64, &bar0->gpio_control);
8040                 val64 = 0x0411040400000000ULL;
8041                 writeq(val64, (void __iomem *) bar0 + 0x2700);
8042                 val64 = readq(&bar0->gpio_control);
8043         }
8044
8045         sp->rx_csum = 1;        /* Rx chksum verify enabled by default */
8046
8047         if (register_netdev(dev)) {
8048                 DBG_PRINT(ERR_DBG, "Device registration failed\n");
8049                 ret = -ENODEV;
8050                 goto register_failed;
8051         }
8052         s2io_vpd_read(sp);
8053         DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2007 Neterion Inc.\n");
8054         DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n",dev->name,
8055                   sp->product_name, pdev->revision);
8056         DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
8057                   s2io_driver_version);
8058         DBG_PRINT(ERR_DBG, "%s: MAC ADDR: %s\n",
8059                   dev->name, print_mac(mac, dev->dev_addr));
8060         DBG_PRINT(ERR_DBG, "SERIAL NUMBER: %s\n", sp->serial_num);
8061         if (sp->device_type & XFRAME_II_DEVICE) {
8062                 mode = s2io_print_pci_mode(sp);
8063                 if (mode < 0) {
8064                         DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
8065                         ret = -EBADSLT;
8066                         unregister_netdev(dev);
8067                         goto set_swap_failed;
8068                 }
8069         }
8070         switch(sp->rxd_mode) {
8071                 case RXD_MODE_1:
8072                     DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",
8073                                                 dev->name);
8074                     break;
8075                 case RXD_MODE_3B:
8076                     DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",
8077                                                 dev->name);
8078                     break;
8079         }
8080
8081         if (napi)
8082                 DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
8083
8084         DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,
8085                 sp->config.tx_fifo_num);
8086
8087         DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name,
8088                   sp->config.rx_ring_num);
8089
8090         switch(sp->config.intr_type) {
8091                 case INTA:
8092                     DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
8093                     break;
8094                 case MSI_X:
8095                     DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);
8096                     break;
8097         }
8098         if (sp->config.multiq) {
8099         for (i = 0; i < sp->config.tx_fifo_num; i++)
8100                 mac_control->fifos[i].multiq = config->multiq;
8101                 DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n",
8102                         dev->name);
8103         } else
8104                 DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",
8105                         dev->name);
8106
8107         switch (sp->config.tx_steering_type) {
8108         case NO_STEERING:
8109                 DBG_PRINT(ERR_DBG, "%s: No steering enabled for"
8110                         " transmit\n", dev->name);
8111                         break;
8112         case TX_PRIORITY_STEERING:
8113                 DBG_PRINT(ERR_DBG, "%s: Priority steering enabled for"
8114                         " transmit\n", dev->name);
8115                 break;
8116         case TX_DEFAULT_STEERING:
8117                 DBG_PRINT(ERR_DBG, "%s: Default steering enabled for"
8118                         " transmit\n", dev->name);
8119         }
8120
8121         if (sp->lro)
8122                 DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
8123                           dev->name);
8124         if (ufo)
8125                 DBG_PRINT(ERR_DBG, "%s: UDP Fragmentation Offload(UFO)"
8126                                         " enabled\n", dev->name);
8127         /* Initialize device name */
8128         sprintf(sp->name, "%s Neterion %s", dev->name, sp->product_name);
8129
8130         /*
8131          * Make Link state as off at this point, when the Link change
8132          * interrupt comes the state will be automatically changed to
8133          * the right state.
8134          */
8135         netif_carrier_off(dev);
8136
8137         return 0;
8138
8139       register_failed:
8140       set_swap_failed:
8141         iounmap(sp->bar1);
8142       bar1_remap_failed:
8143         iounmap(sp->bar0);
8144       bar0_remap_failed:
8145       mem_alloc_failed:
8146         free_shared_mem(sp);
8147         pci_disable_device(pdev);
8148         pci_release_regions(pdev);
8149         pci_set_drvdata(pdev, NULL);
8150         free_netdev(dev);
8151
8152         return ret;
8153 }
8154
8155 /**
8156  * s2io_rem_nic - Free the PCI device
8157  * @pdev: structure containing the PCI related information of the device.
8158  * Description: This function is called by the Pci subsystem to release a
8159  * PCI device and free up all resource held up by the device. This could
8160  * be in response to a Hot plug event or when the driver is to be removed
8161  * from memory.
8162  */
8163
8164 static void __devexit s2io_rem_nic(struct pci_dev *pdev)
8165 {
8166         struct net_device *dev =
8167             (struct net_device *) pci_get_drvdata(pdev);
8168         struct s2io_nic *sp;
8169
8170         if (dev == NULL) {
8171                 DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");
8172                 return;
8173         }
8174
8175         flush_scheduled_work();
8176
8177         sp = dev->priv;
8178         unregister_netdev(dev);
8179
8180         free_shared_mem(sp);
8181         iounmap(sp->bar0);
8182         iounmap(sp->bar1);
8183         pci_release_regions(pdev);
8184         pci_set_drvdata(pdev, NULL);
8185         free_netdev(dev);
8186         pci_disable_device(pdev);
8187 }
8188
8189 /**
8190  * s2io_starter - Entry point for the driver
8191  * Description: This function is the entry point for the driver. It verifies
8192  * the module loadable parameters and initializes PCI configuration space.
8193  */
8194
8195 static int __init s2io_starter(void)
8196 {
8197         return pci_register_driver(&s2io_driver);
8198 }
8199
8200 /**
8201  * s2io_closer - Cleanup routine for the driver
8202  * Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
8203  */
8204
8205 static __exit void s2io_closer(void)
8206 {
8207         pci_unregister_driver(&s2io_driver);
8208         DBG_PRINT(INIT_DBG, "cleanup done\n");
8209 }
8210
8211 module_init(s2io_starter);
8212 module_exit(s2io_closer);
8213
8214 static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip,
8215                 struct tcphdr **tcp, struct RxD_t *rxdp,
8216                 struct s2io_nic *sp)
8217 {
8218         int ip_off;
8219         u8 l2_type = (u8)((rxdp->Control_1 >> 37) & 0x7), ip_len;
8220
8221         if (!(rxdp->Control_1 & RXD_FRAME_PROTO_TCP)) {
8222                 DBG_PRINT(INIT_DBG,"%s: Non-TCP frames not supported for LRO\n",
8223                           __FUNCTION__);
8224                 return -1;
8225         }
8226
8227         /* Checking for DIX type or DIX type with VLAN */
8228         if ((l2_type == 0)
8229                 || (l2_type == 4)) {
8230                 ip_off = HEADER_ETHERNET_II_802_3_SIZE;
8231                 /*
8232                  * If vlan stripping is disabled and the frame is VLAN tagged,
8233                  * shift the offset by the VLAN header size bytes.
8234                  */
8235                 if ((!vlan_strip_flag) &&
8236                         (rxdp->Control_1 & RXD_FRAME_VLAN_TAG))
8237                         ip_off += HEADER_VLAN_SIZE;
8238         } else {
8239                 /* LLC, SNAP etc are considered non-mergeable */
8240                 return -1;
8241         }
8242
8243         *ip = (struct iphdr *)((u8 *)buffer + ip_off);
8244         ip_len = (u8)((*ip)->ihl);
8245         ip_len <<= 2;
8246         *tcp = (struct tcphdr *)((unsigned long)*ip + ip_len);
8247
8248         return 0;
8249 }
8250
8251 static int check_for_socket_match(struct lro *lro, struct iphdr *ip,
8252                                   struct tcphdr *tcp)
8253 {
8254         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8255         if ((lro->iph->saddr != ip->saddr) || (lro->iph->daddr != ip->daddr) ||
8256            (lro->tcph->source != tcp->source) || (lro->tcph->dest != tcp->dest))
8257                 return -1;
8258         return 0;
8259 }
8260
8261 static inline int get_l4_pyld_length(struct iphdr *ip, struct tcphdr *tcp)
8262 {
8263         return(ntohs(ip->tot_len) - (ip->ihl << 2) - (tcp->doff << 2));
8264 }
8265
8266 static void initiate_new_session(struct lro *lro, u8 *l2h,
8267         struct iphdr *ip, struct tcphdr *tcp, u32 tcp_pyld_len, u16 vlan_tag)
8268 {
8269         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8270         lro->l2h = l2h;
8271         lro->iph = ip;
8272         lro->tcph = tcp;
8273         lro->tcp_next_seq = tcp_pyld_len + ntohl(tcp->seq);
8274         lro->tcp_ack = tcp->ack_seq;
8275         lro->sg_num = 1;
8276         lro->total_len = ntohs(ip->tot_len);
8277         lro->frags_len = 0;
8278         lro->vlan_tag = vlan_tag;
8279         /*
8280          * check if we saw TCP timestamp. Other consistency checks have
8281          * already been done.
8282          */
8283         if (tcp->doff == 8) {
8284                 __be32 *ptr;
8285                 ptr = (__be32 *)(tcp+1);
8286                 lro->saw_ts = 1;
8287                 lro->cur_tsval = ntohl(*(ptr+1));
8288                 lro->cur_tsecr = *(ptr+2);
8289         }
8290         lro->in_use = 1;
8291 }
8292
8293 static void update_L3L4_header(struct s2io_nic *sp, struct lro *lro)
8294 {
8295         struct iphdr *ip = lro->iph;
8296         struct tcphdr *tcp = lro->tcph;
8297         __sum16 nchk;
8298         struct stat_block *statinfo = sp->mac_control.stats_info;
8299         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8300
8301         /* Update L3 header */
8302         ip->tot_len = htons(lro->total_len);
8303         ip->check = 0;
8304         nchk = ip_fast_csum((u8 *)lro->iph, ip->ihl);
8305         ip->check = nchk;
8306
8307         /* Update L4 header */
8308         tcp->ack_seq = lro->tcp_ack;
8309         tcp->window = lro->window;
8310
8311         /* Update tsecr field if this session has timestamps enabled */
8312         if (lro->saw_ts) {
8313                 __be32 *ptr = (__be32 *)(tcp + 1);
8314                 *(ptr+2) = lro->cur_tsecr;
8315         }
8316
8317         /* Update counters required for calculation of
8318          * average no. of packets aggregated.
8319          */
8320         statinfo->sw_stat.sum_avg_pkts_aggregated += lro->sg_num;
8321         statinfo->sw_stat.num_aggregations++;
8322 }
8323
8324 static void aggregate_new_rx(struct lro *lro, struct iphdr *ip,
8325                 struct tcphdr *tcp, u32 l4_pyld)
8326 {
8327         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8328         lro->total_len += l4_pyld;
8329         lro->frags_len += l4_pyld;
8330         lro->tcp_next_seq += l4_pyld;
8331         lro->sg_num++;
8332
8333         /* Update ack seq no. and window ad(from this pkt) in LRO object */
8334         lro->tcp_ack = tcp->ack_seq;
8335         lro->window = tcp->window;
8336
8337         if (lro->saw_ts) {
8338                 __be32 *ptr;
8339                 /* Update tsecr and tsval from this packet */
8340                 ptr = (__be32 *)(tcp+1);
8341                 lro->cur_tsval = ntohl(*(ptr+1));
8342                 lro->cur_tsecr = *(ptr + 2);
8343         }
8344 }
8345
8346 static int verify_l3_l4_lro_capable(struct lro *l_lro, struct iphdr *ip,
8347                                     struct tcphdr *tcp, u32 tcp_pyld_len)
8348 {
8349         u8 *ptr;
8350
8351         DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
8352
8353         if (!tcp_pyld_len) {
8354                 /* Runt frame or a pure ack */
8355                 return -1;
8356         }
8357
8358         if (ip->ihl != 5) /* IP has options */
8359                 return -1;
8360
8361         /* If we see CE codepoint in IP header, packet is not mergeable */
8362         if (INET_ECN_is_ce(ipv4_get_dsfield(ip)))
8363                 return -1;
8364
8365         /* If we see ECE or CWR flags in TCP header, packet is not mergeable */
8366         if (tcp->urg || tcp->psh || tcp->rst || tcp->syn || tcp->fin ||
8367                                     tcp->ece || tcp->cwr || !tcp->ack) {
8368                 /*
8369                  * Currently recognize only the ack control word and
8370                  * any other control field being set would result in
8371                  * flushing the LRO session
8372                  */
8373                 return -1;
8374         }
8375
8376         /*
8377          * Allow only one TCP timestamp option. Don't aggregate if
8378          * any other options are detected.
8379          */
8380         if (tcp->doff != 5 && tcp->doff != 8)
8381                 return -1;
8382
8383         if (tcp->doff == 8) {
8384                 ptr = (u8 *)(tcp + 1);
8385                 while (*ptr == TCPOPT_NOP)
8386                         ptr++;
8387                 if (*ptr != TCPOPT_TIMESTAMP || *(ptr+1) != TCPOLEN_TIMESTAMP)
8388                         return -1;
8389
8390                 /* Ensure timestamp value increases monotonically */
8391                 if (l_lro)
8392                         if (l_lro->cur_tsval > ntohl(*((__be32 *)(ptr+2))))
8393                                 return -1;
8394
8395                 /* timestamp echo reply should be non-zero */
8396                 if (*((__be32 *)(ptr+6)) == 0)
8397                         return -1;
8398         }
8399
8400         return 0;
8401 }
8402
8403 static int
8404 s2io_club_tcp_session(struct ring_info *ring_data, u8 *buffer, u8 **tcp,
8405         u32 *tcp_len, struct lro **lro, struct RxD_t *rxdp,
8406         struct s2io_nic *sp)
8407 {
8408         struct iphdr *ip;
8409         struct tcphdr *tcph;
8410         int ret = 0, i;
8411         u16 vlan_tag = 0;
8412
8413         if (!(ret = check_L2_lro_capable(buffer, &ip, (struct tcphdr **)tcp,
8414                                          rxdp, sp))) {
8415                 DBG_PRINT(INFO_DBG,"IP Saddr: %x Daddr: %x\n",
8416                           ip->saddr, ip->daddr);
8417         } else
8418                 return ret;
8419
8420         vlan_tag = RXD_GET_VLAN_TAG(rxdp->Control_2);
8421         tcph = (struct tcphdr *)*tcp;
8422         *tcp_len = get_l4_pyld_length(ip, tcph);
8423         for (i=0; i<MAX_LRO_SESSIONS; i++) {
8424                 struct lro *l_lro = &ring_data->lro0_n[i];
8425                 if (l_lro->in_use) {
8426                         if (check_for_socket_match(l_lro, ip, tcph))
8427                                 continue;
8428                         /* Sock pair matched */
8429                         *lro = l_lro;
8430
8431                         if ((*lro)->tcp_next_seq != ntohl(tcph->seq)) {
8432                                 DBG_PRINT(INFO_DBG, "%s:Out of order. expected "
8433                                           "0x%x, actual 0x%x\n", __FUNCTION__,
8434                                           (*lro)->tcp_next_seq,
8435                                           ntohl(tcph->seq));
8436
8437                                 sp->mac_control.stats_info->
8438                                    sw_stat.outof_sequence_pkts++;
8439                                 ret = 2;
8440                                 break;
8441                         }
8442
8443                         if (!verify_l3_l4_lro_capable(l_lro, ip, tcph,*tcp_len))
8444                                 ret = 1; /* Aggregate */
8445                         else
8446                                 ret = 2; /* Flush both */
8447                         break;
8448                 }
8449         }
8450
8451         if (ret == 0) {
8452                 /* Before searching for available LRO objects,
8453                  * check if the pkt is L3/L4 aggregatable. If not
8454                  * don't create new LRO session. Just send this
8455                  * packet up.
8456                  */
8457                 if (verify_l3_l4_lro_capable(NULL, ip, tcph, *tcp_len)) {
8458                         return 5;
8459                 }
8460
8461                 for (i=0; i<MAX_LRO_SESSIONS; i++) {
8462                         struct lro *l_lro = &ring_data->lro0_n[i];
8463                         if (!(l_lro->in_use)) {
8464                                 *lro = l_lro;
8465                                 ret = 3; /* Begin anew */
8466                                 break;
8467                         }
8468                 }
8469         }
8470
8471         if (ret == 0) { /* sessions exceeded */
8472                 DBG_PRINT(INFO_DBG,"%s:All LRO sessions already in use\n",
8473                           __FUNCTION__);
8474                 *lro = NULL;
8475                 return ret;
8476         }
8477
8478         switch (ret) {
8479                 case 3:
8480                         initiate_new_session(*lro, buffer, ip, tcph, *tcp_len,
8481                                                                 vlan_tag);
8482                         break;
8483                 case 2:
8484                         update_L3L4_header(sp, *lro);
8485                         break;
8486                 case 1:
8487                         aggregate_new_rx(*lro, ip, tcph, *tcp_len);
8488                         if ((*lro)->sg_num == sp->lro_max_aggr_per_sess) {
8489                                 update_L3L4_header(sp, *lro);
8490                                 ret = 4; /* Flush the LRO */
8491                         }
8492                         break;
8493                 default:
8494                         DBG_PRINT(ERR_DBG,"%s:Dont know, can't say!!\n",
8495                                 __FUNCTION__);
8496                         break;
8497         }
8498
8499         return ret;
8500 }
8501
8502 static void clear_lro_session(struct lro *lro)
8503 {
8504         static u16 lro_struct_size = sizeof(struct lro);
8505
8506         memset(lro, 0, lro_struct_size);
8507 }
8508
8509 static void queue_rx_frame(struct sk_buff *skb, u16 vlan_tag)
8510 {
8511         struct net_device *dev = skb->dev;
8512         struct s2io_nic *sp = dev->priv;
8513
8514         skb->protocol = eth_type_trans(skb, dev);
8515         if (sp->vlgrp && vlan_tag
8516                 && (vlan_strip_flag)) {
8517                 /* Queueing the vlan frame to the upper layer */
8518                 if (sp->config.napi)
8519                         vlan_hwaccel_receive_skb(skb, sp->vlgrp, vlan_tag);
8520                 else
8521                         vlan_hwaccel_rx(skb, sp->vlgrp, vlan_tag);
8522         } else {
8523                 if (sp->config.napi)
8524                         netif_receive_skb(skb);
8525                 else
8526                         netif_rx(skb);
8527         }
8528 }
8529
8530 static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
8531                            struct sk_buff *skb,
8532                            u32 tcp_len)
8533 {
8534         struct sk_buff *first = lro->parent;
8535
8536         first->len += tcp_len;
8537         first->data_len = lro->frags_len;
8538         skb_pull(skb, (skb->len - tcp_len));
8539         if (skb_shinfo(first)->frag_list)
8540                 lro->last_frag->next = skb;
8541         else
8542                 skb_shinfo(first)->frag_list = skb;
8543         first->truesize += skb->truesize;
8544         lro->last_frag = skb;
8545         sp->mac_control.stats_info->sw_stat.clubbed_frms_cnt++;
8546         return;
8547 }
8548
8549 /**
8550  * s2io_io_error_detected - called when PCI error is detected
8551  * @pdev: Pointer to PCI device
8552  * @state: The current pci connection state
8553  *
8554  * This function is called after a PCI bus error affecting
8555  * this device has been detected.
8556  */
8557 static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
8558                                                pci_channel_state_t state)
8559 {
8560         struct net_device *netdev = pci_get_drvdata(pdev);
8561         struct s2io_nic *sp = netdev->priv;
8562
8563         netif_device_detach(netdev);
8564
8565         if (netif_running(netdev)) {
8566                 /* Bring down the card, while avoiding PCI I/O */
8567                 do_s2io_card_down(sp, 0);
8568         }
8569         pci_disable_device(pdev);
8570
8571         return PCI_ERS_RESULT_NEED_RESET;
8572 }
8573
8574 /**
8575  * s2io_io_slot_reset - called after the pci bus has been reset.
8576  * @pdev: Pointer to PCI device
8577  *
8578  * Restart the card from scratch, as if from a cold-boot.
8579  * At this point, the card has exprienced a hard reset,
8580  * followed by fixups by BIOS, and has its config space
8581  * set up identically to what it was at cold boot.
8582  */
8583 static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev)
8584 {
8585         struct net_device *netdev = pci_get_drvdata(pdev);
8586         struct s2io_nic *sp = netdev->priv;
8587
8588         if (pci_enable_device(pdev)) {
8589                 printk(KERN_ERR "s2io: "
8590                        "Cannot re-enable PCI device after reset.\n");
8591                 return PCI_ERS_RESULT_DISCONNECT;
8592         }
8593
8594         pci_set_master(pdev);
8595         s2io_reset(sp);
8596
8597         return PCI_ERS_RESULT_RECOVERED;
8598 }
8599
8600 /**
8601  * s2io_io_resume - called when traffic can start flowing again.
8602  * @pdev: Pointer to PCI device
8603  *
8604  * This callback is called when the error recovery driver tells
8605  * us that its OK to resume normal operation.
8606  */
8607 static void s2io_io_resume(struct pci_dev *pdev)
8608 {
8609         struct net_device *netdev = pci_get_drvdata(pdev);
8610         struct s2io_nic *sp = netdev->priv;
8611
8612         if (netif_running(netdev)) {
8613                 if (s2io_card_up(sp)) {
8614                         printk(KERN_ERR "s2io: "
8615                                "Can't bring device back up after reset.\n");
8616                         return;
8617                 }
8618
8619                 if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) {
8620                         s2io_card_down(sp);
8621                         printk(KERN_ERR "s2io: "
8622                                "Can't resetore mac addr after reset.\n");
8623                         return;
8624                 }
8625         }
8626
8627         netif_device_attach(netdev);
8628         netif_wake_queue(netdev);
8629 }