Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm
[linux-2.6] / arch / arm / mach-ep93xx / micro9.c
1 /*
2  *  linux/arch/arm/mach-ep93xx/micro9.c
3  *
4  * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
5  *                   Manfred Gruber <manfred.gruber@contec.at>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  */
11
12 #include <linux/init.h>
13 #include <linux/interrupt.h>
14 #include <linux/ioport.h>
15 #include <linux/kernel.h>
16 #include <linux/mm.h>
17 #include <linux/platform_device.h>
18 #include <linux/sched.h>
19 #include <linux/io.h>
20 #include <linux/i2c.h>
21 #include <linux/mtd/physmap.h>
22
23 #include <mach/hardware.h>
24
25 #include <asm/mach/arch.h>
26 #include <asm/mach-types.h>
27
28 static struct ep93xx_eth_data micro9_eth_data = {
29         .phy_id         = 0x1f,
30 };
31
32 static void __init micro9_init(void)
33 {
34         ep93xx_register_eth(&micro9_eth_data, 1);
35 }
36
37 /*
38  * Micro9-H
39  */
40 #ifdef CONFIG_MACH_MICRO9H
41 static struct physmap_flash_data micro9h_flash_data = {
42         .width          = 4,
43 };
44
45 static struct resource micro9h_flash_resource = {
46         .start          = EP93XX_CS1_PHYS_BASE,
47         .end            = EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
48         .flags          = IORESOURCE_MEM,
49 };
50
51 static struct platform_device micro9h_flash = {
52         .name           = "physmap-flash",
53         .id             = 0,
54         .dev            = {
55                 .platform_data  = &micro9h_flash_data,
56         },
57         .num_resources  = 1,
58         .resource       = &micro9h_flash_resource,
59 };
60
61 static void __init micro9h_init(void)
62 {
63         platform_device_register(&micro9h_flash);
64 }
65
66 static void __init micro9h_init_machine(void)
67 {
68         ep93xx_init_devices();
69         micro9_init();
70         micro9h_init();
71 }
72
73 MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
74         /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
75         .phys_io        = EP93XX_APB_PHYS_BASE,
76         .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
77         .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
78         .map_io         = ep93xx_map_io,
79         .init_irq       = ep93xx_init_irq,
80         .timer          = &ep93xx_timer,
81         .init_machine   = micro9h_init_machine,
82 MACHINE_END
83 #endif
84
85 /*
86  * Micro9-M
87  */
88 #ifdef CONFIG_MACH_MICRO9M
89 static void __init micro9m_init_machine(void)
90 {
91         ep93xx_init_devices();
92         micro9_init();
93 }
94
95 MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
96         /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
97         .phys_io        = EP93XX_APB_PHYS_BASE,
98         .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
99         .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
100         .map_io         = ep93xx_map_io,
101         .init_irq       = ep93xx_init_irq,
102         .timer          = &ep93xx_timer,
103         .init_machine   = micro9m_init_machine,
104 MACHINE_END
105 #endif
106
107 /*
108  * Micro9-L
109  */
110 #ifdef CONFIG_MACH_MICRO9L
111 static void __init micro9l_init_machine(void)
112 {
113         ep93xx_init_devices();
114         micro9_init();
115 }
116
117 MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
118         /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
119         .phys_io        = EP93XX_APB_PHYS_BASE,
120         .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
121         .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
122         .map_io         = ep93xx_map_io,
123         .init_irq       = ep93xx_init_irq,
124         .timer          = &ep93xx_timer,
125         .init_machine   = micro9l_init_machine,
126 MACHINE_END
127 #endif
128