git.oblomov.eu Git - linux-2.6/blob - drivers/spi/spi_bfin5xx.c

   1 /*
   2  * File:         drivers/spi/bfin5xx_spi.c
   3  * Based on:     N/A
   4  * Author:       Luke Yang (Analog Devices Inc.)
   5  *
   6  * Created:      March. 10th 2006
   7  * Description:  SPI controller driver for Blackfin 5xx
   8  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
   9  *
  10  * Modified:
  11  *      March 10, 2006  bfin5xx_spi.c Created. (Luke Yang)
  12  *      August 7, 2006  added full duplex mode (Axel Weiss & Luke Yang)
  13  *
  14  * Copyright 2004-2006 Analog Devices Inc.
  15  *
  16  * This program is free software ;  you can redistribute it and/or modify
  17  * it under the terms of the GNU General Public License as published by
  18  * the Free Software Foundation ;  either version 2, or (at your option)
  19  * any later version.
  20  *
  21  * This program is distributed in the hope that it will be useful,
  22  * but WITHOUT ANY WARRANTY ;  without even the implied warranty of
  23  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  24  * GNU General Public License for more details.
  25  *
  26  * You should have received a copy of the GNU General Public License
  27  * along with this program ;  see the file COPYING.
  28  * If not, write to the Free Software Foundation,
  29  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  30  */
  31
  32 #include <linux/init.h>
  33 #include <linux/module.h>
  34 #include <linux/device.h>
  35 #include <linux/ioport.h>
  36 #include <linux/errno.h>
  37 #include <linux/interrupt.h>
  38 #include <linux/platform_device.h>
  39 #include <linux/dma-mapping.h>
  40 #include <linux/spi/spi.h>
  41 #include <linux/workqueue.h>
  42 #include <linux/errno.h>
  43 #include <linux/delay.h>
  44
  45 #include <asm/io.h>
  46 #include <asm/irq.h>
  47 #include <asm/delay.h>
  48 #include <asm/dma.h>
  49
  50 #include <asm/bfin5xx_spi.h>
  51
  52 MODULE_AUTHOR("Luke Yang");
  53 MODULE_DESCRIPTION("Blackfin 5xx SPI Contoller");
  54 MODULE_LICENSE("GPL");
  55
  56 #define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
  57
  58 #define DEFINE_SPI_REG(reg, off) \
  59 static inline u16 read_##reg(void) \
  60             { return *(volatile unsigned short*)(SPI0_REGBASE + off); } \
  61 static inline void write_##reg(u16 v) \
  62             {*(volatile unsigned short*)(SPI0_REGBASE + off) = v;\
  63              SSYNC();}
  64
  65 DEFINE_SPI_REG(CTRL, 0x00)
  66 DEFINE_SPI_REG(FLAG, 0x04)
  67 DEFINE_SPI_REG(STAT, 0x08)
  68 DEFINE_SPI_REG(TDBR, 0x0C)
  69 DEFINE_SPI_REG(RDBR, 0x10)
  70 DEFINE_SPI_REG(BAUD, 0x14)
  71 DEFINE_SPI_REG(SHAW, 0x18)
  72 #define START_STATE ((void*)0)
  73 #define RUNNING_STATE ((void*)1)
  74 #define DONE_STATE ((void*)2)
  75 #define ERROR_STATE ((void*)-1)
  76 #define QUEUE_RUNNING 0
  77 #define QUEUE_STOPPED 1
  78 int dma_requested;
  79
  80 struct driver_data {
  81         /* Driver model hookup */
  82         struct platform_device *pdev;
  83
  84         /* SPI framework hookup */
  85         struct spi_master *master;
  86
  87         /* BFIN hookup */
  88         struct bfin5xx_spi_master *master_info;
  89
  90         /* Driver message queue */
  91         struct workqueue_struct *workqueue;
  92         struct work_struct pump_messages;
  93         spinlock_t lock;
  94         struct list_head queue;
  95         int busy;
  96         int run;
  97
  98         /* Message Transfer pump */
  99         struct tasklet_struct pump_transfers;
 100
 101         /* Current message transfer state info */
 102         struct spi_message *cur_msg;
 103         struct spi_transfer *cur_transfer;
 104         struct chip_data *cur_chip;
 105         size_t len_in_bytes;
 106         size_t len;
 107         void *tx;
 108         void *tx_end;
 109         void *rx;
 110         void *rx_end;
 111         int dma_mapped;
 112         dma_addr_t rx_dma;
 113         dma_addr_t tx_dma;
 114         size_t rx_map_len;
 115         size_t tx_map_len;
 116         u8 n_bytes;
 117         void (*write) (struct driver_data *);
 118         void (*read) (struct driver_data *);
 119         void (*duplex) (struct driver_data *);
 120 };
 121
 122 struct chip_data {
 123         u16 ctl_reg;
 124         u16 baud;
 125         u16 flag;
 126
 127         u8 chip_select_num;
 128         u8 n_bytes;
 129         u8 width;               /* 0 or 1 */
 130         u8 enable_dma;
 131         u8 bits_per_word;       /* 8 or 16 */
 132         u8 cs_change_per_word;
 133         u8 cs_chg_udelay;
 134         void (*write) (struct driver_data *);
 135         void (*read) (struct driver_data *);
 136         void (*duplex) (struct driver_data *);
 137 };
 138
 139 static void bfin_spi_enable(struct driver_data *drv_data)
 140 {
 141         u16 cr;
 142
 143         cr = read_CTRL();
 144         write_CTRL(cr | BIT_CTL_ENABLE);
 145         SSYNC();
 146 }
 147
 148 static void bfin_spi_disable(struct driver_data *drv_data)
 149 {
 150         u16 cr;
 151
 152         cr = read_CTRL();
 153         write_CTRL(cr & (~BIT_CTL_ENABLE));
 154         SSYNC();
 155 }
 156
 157 /* Caculate the SPI_BAUD register value based on input HZ */
 158 static u16 hz_to_spi_baud(u32 speed_hz)
 159 {
 160         u_long sclk = get_sclk();
 161         u16 spi_baud = (sclk / (2 * speed_hz));
 162
 163         if ((sclk % (2 * speed_hz)) > 0)
 164                 spi_baud++;
 165
 166         return spi_baud;
 167 }
 168
 169 static int flush(struct driver_data *drv_data)
 170 {
 171         unsigned long limit = loops_per_jiffy << 1;
 172
 173         /* wait for stop and clear stat */
 174         while (!(read_STAT() & BIT_STAT_SPIF) && limit--)
 175                 continue;
 176
 177         write_STAT(BIT_STAT_CLR);
 178
 179         return limit;
 180 }
 181
 182 /* stop controller and re-config current chip*/
 183 static void restore_state(struct driver_data *drv_data)
 184 {
 185         struct chip_data *chip = drv_data->cur_chip;
 186
 187         /* Clear status and disable clock */
 188         write_STAT(BIT_STAT_CLR);
 189         bfin_spi_disable(drv_data);
 190         dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n");
 191
 192 #if defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
 193         dev_dbg(&drv_data->pdev->dev,
 194                 "chip select number is %d\n", chip->chip_select_num);
 195
 196         switch (chip->chip_select_num) {
 197         case 1:
 198                 bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3c00);
 199                 SSYNC();
 200                 break;
 201
 202         case 2:
 203         case 3:
 204                 bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PJSE_SPI);
 205                 SSYNC();
 206                 bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3800);
 207                 SSYNC();
 208                 break;
 209
 210         case 4:
 211                 bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS4E_SPI);
 212                 SSYNC();
 213                 bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3840);
 214                 SSYNC();
 215                 break;
 216
 217         case 5:
 218                 bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS5E_SPI);
 219                 SSYNC();
 220                 bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3820);
 221                 SSYNC();
 222                 break;
 223
 224         case 6:
 225                 bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS6E_SPI);
 226                 SSYNC();
 227                 bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3810);
 228                 SSYNC();
 229                 break;
 230
 231         case 7:
 232                 bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PJCE_SPI);
 233                 SSYNC();
 234                 bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3800);
 235                 SSYNC();
 236                 break;
 237         }
 238 #endif
 239
 240         /* Load the registers */
 241         write_CTRL(chip->ctl_reg);
 242         write_BAUD(chip->baud);
 243         write_FLAG(chip->flag);
 244 }
 245
 246 /* used to kick off transfer in rx mode */
 247 static unsigned short dummy_read(void)
 248 {
 249         unsigned short tmp;
 250         tmp = read_RDBR();
 251         return tmp;
 252 }
 253
 254 static void null_writer(struct driver_data *drv_data)
 255 {
 256         u8 n_bytes = drv_data->n_bytes;
 257
 258         while (drv_data->tx < drv_data->tx_end) {
 259                 write_TDBR(0);
 260                 while ((read_STAT() & BIT_STAT_TXS))
 261                         continue;
 262                 drv_data->tx += n_bytes;
 263         }
 264 }
 265
 266 static void null_reader(struct driver_data *drv_data)
 267 {
 268         u8 n_bytes = drv_data->n_bytes;
 269         dummy_read();
 270
 271         while (drv_data->rx < drv_data->rx_end) {
 272                 while (!(read_STAT() & BIT_STAT_RXS))
 273                         continue;
 274                 dummy_read();
 275                 drv_data->rx += n_bytes;
 276         }
 277 }
 278
 279 static void u8_writer(struct driver_data *drv_data)
 280 {
 281         dev_dbg(&drv_data->pdev->dev,
 282                 "cr8-s is 0x%x\n", read_STAT());
 283         while (drv_data->tx < drv_data->tx_end) {
 284                 write_TDBR(*(u8 *) (drv_data->tx));
 285                 while (read_STAT() & BIT_STAT_TXS)
 286                         continue;
 287                 ++drv_data->tx;
 288         }
 289
 290         /* poll for SPI completion before returning */
 291         while (!(read_STAT() & BIT_STAT_SPIF))
 292                 continue;
 293 }
 294
 295 static void u8_cs_chg_writer(struct driver_data *drv_data)
 296 {
 297         struct chip_data *chip = drv_data->cur_chip;
 298
 299         while (drv_data->tx < drv_data->tx_end) {
 300                 write_FLAG(chip->flag);
 301                 SSYNC();
 302
 303                 write_TDBR(*(u8 *) (drv_data->tx));
 304                 while (read_STAT() & BIT_STAT_TXS)
 305                         continue;
 306                 while (!(read_STAT() & BIT_STAT_SPIF))
 307                         continue;
 308                 write_FLAG(0xFF00 | chip->flag);
 309                 SSYNC();
 310                 if (chip->cs_chg_udelay)
 311                         udelay(chip->cs_chg_udelay);
 312                 ++drv_data->tx;
 313         }
 314         write_FLAG(0xFF00);
 315         SSYNC();
 316 }
 317
 318 static void u8_reader(struct driver_data *drv_data)
 319 {
 320         dev_dbg(&drv_data->pdev->dev,
 321                 "cr-8 is 0x%x\n", read_STAT());
 322
 323         /* clear TDBR buffer before read(else it will be shifted out) */
 324         write_TDBR(0xFFFF);
 325
 326         dummy_read();
 327
 328         while (drv_data->rx < drv_data->rx_end - 1) {
 329                 while (!(read_STAT() & BIT_STAT_RXS))
 330                         continue;
 331                 *(u8 *) (drv_data->rx) = read_RDBR();
 332                 ++drv_data->rx;
 333         }
 334
 335         while (!(read_STAT() & BIT_STAT_RXS))
 336                 continue;
 337         *(u8 *) (drv_data->rx) = read_SHAW();
 338         ++drv_data->rx;
 339 }
 340
 341 static void u8_cs_chg_reader(struct driver_data *drv_data)
 342 {
 343         struct chip_data *chip = drv_data->cur_chip;
 344
 345         while (drv_data->rx < drv_data->rx_end) {
 346                 write_FLAG(chip->flag);
 347                 SSYNC();
 348
 349                 read_RDBR();    /* kick off */
 350                 while (!(read_STAT() & BIT_STAT_RXS))
 351                         continue;
 352                 while (!(read_STAT() & BIT_STAT_SPIF))
 353                         continue;
 354                 *(u8 *) (drv_data->rx) = read_SHAW();
 355                 write_FLAG(0xFF00 | chip->flag);
 356                 SSYNC();
 357                 if (chip->cs_chg_udelay)
 358                         udelay(chip->cs_chg_udelay);
 359                 ++drv_data->rx;
 360         }
 361         write_FLAG(0xFF00);
 362         SSYNC();
 363 }
 364
 365 static void u8_duplex(struct driver_data *drv_data)
 366 {
 367         /* in duplex mode, clk is triggered by writing of TDBR */
 368         while (drv_data->rx < drv_data->rx_end) {
 369                 write_TDBR(*(u8 *) (drv_data->tx));
 370                 while (!(read_STAT() & BIT_STAT_SPIF))
 371                         continue;
 372                 while (!(read_STAT() & BIT_STAT_RXS))
 373                         continue;
 374                 *(u8 *) (drv_data->rx) = read_RDBR();
 375                 ++drv_data->rx;
 376                 ++drv_data->tx;
 377         }
 378 }
 379
 380 static void u8_cs_chg_duplex(struct driver_data *drv_data)
 381 {
 382         struct chip_data *chip = drv_data->cur_chip;
 383
 384         while (drv_data->rx < drv_data->rx_end) {
 385                 write_FLAG(chip->flag);
 386                 SSYNC();
 387
 388                 write_TDBR(*(u8 *) (drv_data->tx));
 389                 while (!(read_STAT() & BIT_STAT_SPIF))
 390                         continue;
 391                 while (!(read_STAT() & BIT_STAT_RXS))
 392                         continue;
 393                 *(u8 *) (drv_data->rx) = read_RDBR();
 394                 write_FLAG(0xFF00 | chip->flag);
 395                 SSYNC();
 396                 if (chip->cs_chg_udelay)
 397                         udelay(chip->cs_chg_udelay);
 398                 ++drv_data->rx;
 399                 ++drv_data->tx;
 400         }
 401         write_FLAG(0xFF00);
 402         SSYNC();
 403 }
 404
 405 static void u16_writer(struct driver_data *drv_data)
 406 {
 407         dev_dbg(&drv_data->pdev->dev,
 408                 "cr16 is 0x%x\n", read_STAT());
 409
 410         while (drv_data->tx < drv_data->tx_end) {
 411                 write_TDBR(*(u16 *) (drv_data->tx));
 412                 while ((read_STAT() & BIT_STAT_TXS))
 413                         continue;
 414                 drv_data->tx += 2;
 415         }
 416
 417         /* poll for SPI completion before returning */
 418         while (!(read_STAT() & BIT_STAT_SPIF))
 419                 continue;
 420 }
 421
 422 static void u16_cs_chg_writer(struct driver_data *drv_data)
 423 {
 424         struct chip_data *chip = drv_data->cur_chip;
 425
 426         while (drv_data->tx < drv_data->tx_end) {
 427                 write_FLAG(chip->flag);
 428                 SSYNC();
 429
 430                 write_TDBR(*(u16 *) (drv_data->tx));
 431                 while ((read_STAT() & BIT_STAT_TXS))
 432                         continue;
 433                 while (!(read_STAT() & BIT_STAT_SPIF))
 434                         continue;
 435                 write_FLAG(0xFF00 | chip->flag);
 436                 SSYNC();
 437                 if (chip->cs_chg_udelay)
 438                         udelay(chip->cs_chg_udelay);
 439                 drv_data->tx += 2;
 440         }
 441         write_FLAG(0xFF00);
 442         SSYNC();
 443 }
 444
 445 static void u16_reader(struct driver_data *drv_data)
 446 {
 447         dev_dbg(&drv_data->pdev->dev,
 448                 "cr-16 is 0x%x\n", read_STAT());
 449         dummy_read();
 450
 451         while (drv_data->rx < (drv_data->rx_end - 2)) {
 452                 while (!(read_STAT() & BIT_STAT_RXS))
 453                         continue;
 454                 *(u16 *) (drv_data->rx) = read_RDBR();
 455                 drv_data->rx += 2;
 456         }
 457
 458         while (!(read_STAT() & BIT_STAT_RXS))
 459                 continue;
 460         *(u16 *) (drv_data->rx) = read_SHAW();
 461         drv_data->rx += 2;
 462 }
 463
 464 static void u16_cs_chg_reader(struct driver_data *drv_data)
 465 {
 466         struct chip_data *chip = drv_data->cur_chip;
 467
 468         while (drv_data->rx < drv_data->rx_end) {
 469                 write_FLAG(chip->flag);
 470                 SSYNC();
 471
 472                 read_RDBR();    /* kick off */
 473                 while (!(read_STAT() & BIT_STAT_RXS))
 474                         continue;
 475                 while (!(read_STAT() & BIT_STAT_SPIF))
 476                         continue;
 477                 *(u16 *) (drv_data->rx) = read_SHAW();
 478                 write_FLAG(0xFF00 | chip->flag);
 479                 SSYNC();
 480                 if (chip->cs_chg_udelay)
 481                         udelay(chip->cs_chg_udelay);
 482                 drv_data->rx += 2;
 483         }
 484         write_FLAG(0xFF00);
 485         SSYNC();
 486 }
 487
 488 static void u16_duplex(struct driver_data *drv_data)
 489 {
 490         /* in duplex mode, clk is triggered by writing of TDBR */
 491         while (drv_data->tx < drv_data->tx_end) {
 492                 write_TDBR(*(u16 *) (drv_data->tx));
 493                 while (!(read_STAT() & BIT_STAT_SPIF))
 494                         continue;
 495                 while (!(read_STAT() & BIT_STAT_RXS))
 496                         continue;
 497                 *(u16 *) (drv_data->rx) = read_RDBR();
 498                 drv_data->rx += 2;
 499                 drv_data->tx += 2;
 500         }
 501 }
 502
 503 static void u16_cs_chg_duplex(struct driver_data *drv_data)
 504 {
 505         struct chip_data *chip = drv_data->cur_chip;
 506
 507         while (drv_data->tx < drv_data->tx_end) {
 508                 write_FLAG(chip->flag);
 509                 SSYNC();
 510
 511                 write_TDBR(*(u16 *) (drv_data->tx));
 512                 while (!(read_STAT() & BIT_STAT_SPIF))
 513                         continue;
 514                 while (!(read_STAT() & BIT_STAT_RXS))
 515                         continue;
 516                 *(u16 *) (drv_data->rx) = read_RDBR();
 517                 write_FLAG(0xFF00 | chip->flag);
 518                 SSYNC();
 519                 if (chip->cs_chg_udelay)
 520                         udelay(chip->cs_chg_udelay);
 521                 drv_data->rx += 2;
 522                 drv_data->tx += 2;
 523         }
 524         write_FLAG(0xFF00);
 525         SSYNC();
 526 }
 527
 528 /* test if ther is more transfer to be done */
 529 static void *next_transfer(struct driver_data *drv_data)
 530 {
 531         struct spi_message *msg = drv_data->cur_msg;
 532         struct spi_transfer *trans = drv_data->cur_transfer;
 533
 534         /* Move to next transfer */
 535         if (trans->transfer_list.next != &msg->transfers) {
 536                 drv_data->cur_transfer =
 537                     list_entry(trans->transfer_list.next,
 538                                struct spi_transfer, transfer_list);
 539                 return RUNNING_STATE;
 540         } else
 541                 return DONE_STATE;
 542 }
 543
 544 /*
 545  * caller already set message->status;
 546  * dma and pio irqs are blocked give finished message back
 547  */
 548 static void giveback(struct driver_data *drv_data)
 549 {
 550         struct spi_transfer *last_transfer;
 551         unsigned long flags;
 552         struct spi_message *msg;
 553
 554         spin_lock_irqsave(&drv_data->lock, flags);
 555         msg = drv_data->cur_msg;
 556         drv_data->cur_msg = NULL;
 557         drv_data->cur_transfer = NULL;
 558         drv_data->cur_chip = NULL;
 559         queue_work(drv_data->workqueue, &drv_data->pump_messages);
 560         spin_unlock_irqrestore(&drv_data->lock, flags);
 561
 562         last_transfer = list_entry(msg->transfers.prev,
 563                                    struct spi_transfer, transfer_list);
 564
 565         msg->state = NULL;
 566
 567         /* disable chip select signal. And not stop spi in autobuffer mode */
 568         if (drv_data->tx_dma != 0xFFFF) {
 569                 write_FLAG(0xFF00);
 570                 bfin_spi_disable(drv_data);
 571         }
 572
 573         if (msg->complete)
 574                 msg->complete(msg->context);
 575 }
 576
 577 static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 578 {
 579         struct driver_data *drv_data = (struct driver_data *)dev_id;
 580         struct spi_message *msg = drv_data->cur_msg;
 581
 582         dev_dbg(&drv_data->pdev->dev, "in dma_irq_handler\n");
 583         clear_dma_irqstat(CH_SPI);
 584
 585         /* Wait for DMA to complete */
 586         while (get_dma_curr_irqstat(CH_SPI) & DMA_RUN)
 587                 continue;
 588
 589         /*
 590          * wait for the last transaction shifted out.  HRM states:
 591          * at this point there may still be data in the SPI DMA FIFO waiting
 592          * to be transmitted ... software needs to poll TXS in the SPI_STAT
 593          * register until it goes low for 2 successive reads
 594          */
 595         if (drv_data->tx != NULL) {
 596                 while ((bfin_read_SPI_STAT() & TXS) ||
 597                        (bfin_read_SPI_STAT() & TXS))
 598                         continue;
 599         }
 600
 601         while (!(bfin_read_SPI_STAT() & SPIF))
 602                 continue;
 603
 604         bfin_spi_disable(drv_data);
 605
 606         msg->actual_length += drv_data->len_in_bytes;
 607
 608         /* Move to next transfer */
 609         msg->state = next_transfer(drv_data);
 610
 611         /* Schedule transfer tasklet */
 612         tasklet_schedule(&drv_data->pump_transfers);
 613
 614         /* free the irq handler before next transfer */
 615         dev_dbg(&drv_data->pdev->dev,
 616                 "disable dma channel irq%d\n",
 617                 CH_SPI);
 618         dma_disable_irq(CH_SPI);
 619
 620         return IRQ_HANDLED;
 621 }
 622
 623 static void pump_transfers(unsigned long data)
 624 {
 625         struct driver_data *drv_data = (struct driver_data *)data;
 626         struct spi_message *message = NULL;
 627         struct spi_transfer *transfer = NULL;
 628         struct spi_transfer *previous = NULL;
 629         struct chip_data *chip = NULL;
 630         u8 width;
 631         u16 cr, dma_width, dma_config;
 632         u32 tranf_success = 1;
 633
 634         /* Get current state information */
 635         message = drv_data->cur_msg;
 636         transfer = drv_data->cur_transfer;
 637         chip = drv_data->cur_chip;
 638
 639         /*
 640          * if msg is error or done, report it back using complete() callback
 641          */
 642
 643          /* Handle for abort */
 644         if (message->state == ERROR_STATE) {
 645                 message->status = -EIO;
 646                 giveback(drv_data);
 647                 return;
 648         }
 649
 650         /* Handle end of message */
 651         if (message->state == DONE_STATE) {
 652                 message->status = 0;
 653                 giveback(drv_data);
 654                 return;
 655         }
 656
 657         /* Delay if requested at end of transfer */
 658         if (message->state == RUNNING_STATE) {
 659                 previous = list_entry(transfer->transfer_list.prev,
 660                                       struct spi_transfer, transfer_list);
 661                 if (previous->delay_usecs)
 662                         udelay(previous->delay_usecs);
 663         }
 664
 665         /* Setup the transfer state based on the type of transfer */
 666         if (flush(drv_data) == 0) {
 667                 dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
 668                 message->status = -EIO;
 669                 giveback(drv_data);
 670                 return;
 671         }
 672
 673         if (transfer->tx_buf != NULL) {
 674                 drv_data->tx = (void *)transfer->tx_buf;
 675                 drv_data->tx_end = drv_data->tx + transfer->len;
 676                 dev_dbg(&drv_data->pdev->dev, "tx_buf is %p, tx_end is %p\n",
 677                         transfer->tx_buf, drv_data->tx_end);
 678         } else {
 679                 drv_data->tx = NULL;
 680         }
 681
 682         if (transfer->rx_buf != NULL) {
 683                 drv_data->rx = transfer->rx_buf;
 684                 drv_data->rx_end = drv_data->rx + transfer->len;
 685                 dev_dbg(&drv_data->pdev->dev, "rx_buf is %p, rx_end is %p\n",
 686                         transfer->rx_buf, drv_data->rx_end);
 687         } else {
 688                 drv_data->rx = NULL;
 689         }
 690
 691         drv_data->rx_dma = transfer->rx_dma;
 692         drv_data->tx_dma = transfer->tx_dma;
 693         drv_data->len_in_bytes = transfer->len;
 694
 695         width = chip->width;
 696         if (width == CFG_SPI_WORDSIZE16) {
 697                 drv_data->len = (transfer->len) >> 1;
 698         } else {
 699                 drv_data->len = transfer->len;
 700         }
 701         drv_data->write = drv_data->tx ? chip->write : null_writer;
 702         drv_data->read = drv_data->rx ? chip->read : null_reader;
 703         drv_data->duplex = chip->duplex ? chip->duplex : null_writer;
 704         dev_dbg(&drv_data->pdev->dev,
 705                 "transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n",
 706                 drv_data->write, chip->write, null_writer);
 707
 708         /* speed and width has been set on per message */
 709         message->state = RUNNING_STATE;
 710         dma_config = 0;
 711
 712         /* restore spi status for each spi transfer */
 713         if (transfer->speed_hz) {
 714                 write_BAUD(hz_to_spi_baud(transfer->speed_hz));
 715         } else {
 716                 write_BAUD(chip->baud);
 717         }
 718         write_FLAG(chip->flag);
 719
 720         dev_dbg(&drv_data->pdev->dev,
 721                 "now pumping a transfer: width is %d, len is %d\n",
 722                 width, transfer->len);
 723
 724         /*
 725          * Try to map dma buffer and do a dma transfer if
 726          * successful use different way to r/w according to
 727          * drv_data->cur_chip->enable_dma
 728          */
 729         if (drv_data->cur_chip->enable_dma && drv_data->len > 6) {
 730
 731                 write_STAT(BIT_STAT_CLR);
 732                 disable_dma(CH_SPI);
 733                 clear_dma_irqstat(CH_SPI);
 734                 bfin_spi_disable(drv_data);
 735
 736                 /* config dma channel */
 737                 dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n");
 738                 if (width == CFG_SPI_WORDSIZE16) {
 739                         set_dma_x_count(CH_SPI, drv_data->len);
 740                         set_dma_x_modify(CH_SPI, 2);
 741                         dma_width = WDSIZE_16;
 742                 } else {
 743                         set_dma_x_count(CH_SPI, drv_data->len);
 744                         set_dma_x_modify(CH_SPI, 1);
 745                         dma_width = WDSIZE_8;
 746                 }
 747
 748                 /* set transfer width,direction. And enable spi */
 749                 cr = (read_CTRL() & (~BIT_CTL_TIMOD));
 750
 751                 /* dirty hack for autobuffer DMA mode */
 752                 if (drv_data->tx_dma == 0xFFFF) {
 753                         dev_dbg(&drv_data->pdev->dev,
 754                                 "doing autobuffer DMA out.\n");
 755
 756                         /* no irq in autobuffer mode */
 757                         dma_config =
 758                             (DMAFLOW_AUTO | RESTART | dma_width | DI_EN);
 759                         set_dma_config(CH_SPI, dma_config);
 760                         set_dma_start_addr(CH_SPI, (unsigned long)drv_data->tx);
 761                         enable_dma(CH_SPI);
 762                         write_CTRL(cr | CFG_SPI_DMAWRITE | (width << 8) |
 763                                    (CFG_SPI_ENABLE << 14));
 764
 765                         /* just return here, there can only be one transfer in this mode */
 766                         message->status = 0;
 767                         giveback(drv_data);
 768                         return;
 769                 }
 770
 771                 /* In dma mode, rx or tx must be NULL in one transfer */
 772                 if (drv_data->rx != NULL) {
 773                         /* set transfer mode, and enable SPI */
 774                         dev_dbg(&drv_data->pdev->dev, "doing DMA in.\n");
 775
 776                         /* disable SPI before write to TDBR */
 777                         write_CTRL(cr & ~BIT_CTL_ENABLE);
 778
 779                         /* clear tx reg soformer data is not shifted out */
 780                         write_TDBR(0xFF);
 781
 782                         set_dma_x_count(CH_SPI, drv_data->len);
 783
 784                         /* start dma */
 785                         dma_enable_irq(CH_SPI);
 786                         dma_config = (WNR | RESTART | dma_width | DI_EN);
 787                         set_dma_config(CH_SPI, dma_config);
 788                         set_dma_start_addr(CH_SPI, (unsigned long)drv_data->rx);
 789                         enable_dma(CH_SPI);
 790
 791                         cr |=
 792                             CFG_SPI_DMAREAD | (width << 8) | (CFG_SPI_ENABLE <<
 793                                                               14);
 794                         /* set transfer mode, and enable SPI */
 795                         write_CTRL(cr);
 796                 } else if (drv_data->tx != NULL) {
 797                         dev_dbg(&drv_data->pdev->dev, "doing DMA out.\n");
 798
 799                         /* start dma */
 800                         dma_enable_irq(CH_SPI);
 801                         dma_config = (RESTART | dma_width | DI_EN);
 802                         set_dma_config(CH_SPI, dma_config);
 803                         set_dma_start_addr(CH_SPI, (unsigned long)drv_data->tx);
 804                         enable_dma(CH_SPI);
 805
 806                         write_CTRL(cr | CFG_SPI_DMAWRITE | (width << 8) |
 807                                    (CFG_SPI_ENABLE << 14));
 808
 809                 }
 810         } else {
 811                 /* IO mode write then read */
 812                 dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n");
 813
 814                 write_STAT(BIT_STAT_CLR);
 815
 816                 if (drv_data->tx != NULL && drv_data->rx != NULL) {
 817                         /* full duplex mode */
 818                         BUG_ON((drv_data->tx_end - drv_data->tx) !=
 819                                (drv_data->rx_end - drv_data->rx));
 820                         cr = (read_CTRL() & (~BIT_CTL_TIMOD));
 821                         cr |= CFG_SPI_WRITE | (width << 8) |
 822                                 (CFG_SPI_ENABLE << 14);
 823                         dev_dbg(&drv_data->pdev->dev,
 824                                 "IO duplex: cr is 0x%x\n", cr);
 825
 826                         write_CTRL(cr);
 827                         SSYNC();
 828
 829                         drv_data->duplex(drv_data);
 830
 831                         if (drv_data->tx != drv_data->tx_end)
 832                                 tranf_success = 0;
 833                 } else if (drv_data->tx != NULL) {
 834                         /* write only half duplex */
 835                         cr = (read_CTRL() & (~BIT_CTL_TIMOD));
 836                         cr |= CFG_SPI_WRITE | (width << 8) |
 837                                 (CFG_SPI_ENABLE << 14);
 838                         dev_dbg(&drv_data->pdev->dev,
 839                                 "IO write: cr is 0x%x\n", cr);
 840
 841                         write_CTRL(cr);
 842                         SSYNC();
 843
 844                         drv_data->write(drv_data);
 845
 846                         if (drv_data->tx != drv_data->tx_end)
 847                                 tranf_success = 0;
 848                 } else if (drv_data->rx != NULL) {
 849                         /* read only half duplex */
 850                         cr = (read_CTRL() & (~BIT_CTL_TIMOD));
 851                         cr |= CFG_SPI_READ | (width << 8) |
 852                                 (CFG_SPI_ENABLE << 14);
 853                         dev_dbg(&drv_data->pdev->dev,
 854                                 "IO read: cr is 0x%x\n", cr);
 855
 856                         write_CTRL(cr);
 857                         SSYNC();
 858
 859                         drv_data->read(drv_data);
 860                         if (drv_data->rx != drv_data->rx_end)
 861                                 tranf_success = 0;
 862                 }
 863
 864                 if (!tranf_success) {
 865                         dev_dbg(&drv_data->pdev->dev,
 866                                 "IO write error!\n");
 867                         message->state = ERROR_STATE;
 868                 } else {
 869                         /* Update total byte transfered */
 870                         message->actual_length += drv_data->len;
 871
 872                         /* Move to next transfer of this msg */
 873                         message->state = next_transfer(drv_data);
 874                 }
 875
 876                 /* Schedule next transfer tasklet */
 877                 tasklet_schedule(&drv_data->pump_transfers);
 878
 879         }
 880 }
 881
 882 /* pop a msg from queue and kick off real transfer */
 883 static void pump_messages(struct work_struct *work)
 884 {
 885         struct driver_data *drv_data = container_of(work, struct driver_data, pump_messages);
 886         unsigned long flags;
 887
 888         /* Lock queue and check for queue work */
 889         spin_lock_irqsave(&drv_data->lock, flags);
 890         if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
 891                 /* pumper kicked off but no work to do */
 892                 drv_data->busy = 0;
 893                 spin_unlock_irqrestore(&drv_data->lock, flags);
 894                 return;
 895         }
 896
 897         /* Make sure we are not already running a message */
 898         if (drv_data->cur_msg) {
 899                 spin_unlock_irqrestore(&drv_data->lock, flags);
 900                 return;
 901         }
 902
 903         /* Extract head of queue */
 904         drv_data->cur_msg = list_entry(drv_data->queue.next,
 905                                        struct spi_message, queue);
 906         list_del_init(&drv_data->cur_msg->queue);
 907
 908         /* Initial message state */
 909         drv_data->cur_msg->state = START_STATE;
 910         drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
 911                                             struct spi_transfer, transfer_list);
 912
 913         /* Setup the SSP using the per chip configuration */
 914         drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
 915         restore_state(drv_data);
 916         dev_dbg(&drv_data->pdev->dev,
 917                 "got a message to pump, state is set to: baud %d, flag 0x%x, ctl 0x%x\n",
 918                 drv_data->cur_chip->baud, drv_data->cur_chip->flag,
 919                 drv_data->cur_chip->ctl_reg);
 920
 921         dev_dbg(&drv_data->pdev->dev,
 922                 "the first transfer len is %d\n",
 923                 drv_data->cur_transfer->len);
 924
 925         /* Mark as busy and launch transfers */
 926         tasklet_schedule(&drv_data->pump_transfers);
 927
 928         drv_data->busy = 1;
 929         spin_unlock_irqrestore(&drv_data->lock, flags);
 930 }
 931
 932 /*
 933  * got a msg to transfer, queue it in drv_data->queue.
 934  * And kick off message pumper
 935  */
 936 static int transfer(struct spi_device *spi, struct spi_message *msg)
 937 {
 938         struct driver_data *drv_data = spi_master_get_devdata(spi->master);
 939         unsigned long flags;
 940
 941         spin_lock_irqsave(&drv_data->lock, flags);
 942
 943         if (drv_data->run == QUEUE_STOPPED) {
 944                 spin_unlock_irqrestore(&drv_data->lock, flags);
 945                 return -ESHUTDOWN;
 946         }
 947
 948         msg->actual_length = 0;
 949         msg->status = -EINPROGRESS;
 950         msg->state = START_STATE;
 951
 952         dev_dbg(&spi->dev, "adding an msg in transfer() \n");
 953         list_add_tail(&msg->queue, &drv_data->queue);
 954
 955         if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
 956                 queue_work(drv_data->workqueue, &drv_data->pump_messages);
 957
 958         spin_unlock_irqrestore(&drv_data->lock, flags);
 959
 960         return 0;
 961 }
 962
 963 /* first setup for new devices */
 964 static int setup(struct spi_device *spi)
 965 {
 966         struct bfin5xx_spi_chip *chip_info = NULL;
 967         struct chip_data *chip;
 968         struct driver_data *drv_data = spi_master_get_devdata(spi->master);
 969         u8 spi_flg;
 970
 971         /* Abort device setup if requested features are not supported */
 972         if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) {
 973                 dev_err(&spi->dev, "requested mode not fully supported\n");
 974                 return -EINVAL;
 975         }
 976
 977         /* Zero (the default) here means 8 bits */
 978         if (!spi->bits_per_word)
 979                 spi->bits_per_word = 8;
 980
 981         if (spi->bits_per_word != 8 && spi->bits_per_word != 16)
 982                 return -EINVAL;
 983
 984         /* Only alloc (or use chip_info) on first setup */
 985         chip = spi_get_ctldata(spi);
 986         if (chip == NULL) {
 987                 chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
 988                 if (!chip)
 989                         return -ENOMEM;
 990
 991                 chip->enable_dma = 0;
 992                 chip_info = spi->controller_data;
 993         }
 994
 995         /* chip_info isn't always needed */
 996         if (chip_info) {
 997                 chip->enable_dma = chip_info->enable_dma != 0
 998                     && drv_data->master_info->enable_dma;
 999                 chip->ctl_reg = chip_info->ctl_reg;
1000                 chip->bits_per_word = chip_info->bits_per_word;
1001                 chip->cs_change_per_word = chip_info->cs_change_per_word;
1002                 chip->cs_chg_udelay = chip_info->cs_chg_udelay;
1003         }
1004
1005         /* translate common spi framework into our register */
1006         if (spi->mode & SPI_CPOL)
1007                 chip->ctl_reg |= CPOL;
1008         if (spi->mode & SPI_CPHA)
1009                 chip->ctl_reg |= CPHA;
1010         if (spi->mode & SPI_LSB_FIRST)
1011                 chip->ctl_reg |= LSBF;
1012         /* we dont support running in slave mode (yet?) */
1013         chip->ctl_reg |= MSTR;
1014
1015         /*
1016          * if any one SPI chip is registered and wants DMA, request the
1017          * DMA channel for it
1018          */
1019         if (chip->enable_dma && !dma_requested) {
1020                 /* register dma irq handler */
1021                 if (request_dma(CH_SPI, "BF53x_SPI_DMA") < 0) {
1022                         dev_dbg(&spi->dev,
1023                                 "Unable to request BlackFin SPI DMA channel\n");
1024                         return -ENODEV;
1025                 }
1026                 if (set_dma_callback(CH_SPI, (void *)dma_irq_handler, drv_data)
1027                     < 0) {
1028                         dev_dbg(&spi->dev, "Unable to set dma callback\n");
1029                         return -EPERM;
1030                 }
1031                 dma_disable_irq(CH_SPI);
1032                 dma_requested = 1;
1033         }
1034
1035         /*
1036          * Notice: for blackfin, the speed_hz is the value of register
1037          * SPI_BAUD, not the real baudrate
1038          */
1039         chip->baud = hz_to_spi_baud(spi->max_speed_hz);
1040         spi_flg = ~(1 << (spi->chip_select));
1041         chip->flag = ((u16) spi_flg << 8) | (1 << (spi->chip_select));
1042         chip->chip_select_num = spi->chip_select;
1043
1044         switch (chip->bits_per_word) {
1045         case 8:
1046                 chip->n_bytes = 1;
1047                 chip->width = CFG_SPI_WORDSIZE8;
1048                 chip->read = chip->cs_change_per_word ?
1049                         u8_cs_chg_reader : u8_reader;
1050                 chip->write = chip->cs_change_per_word ?
1051                         u8_cs_chg_writer : u8_writer;
1052                 chip->duplex = chip->cs_change_per_word ?
1053                         u8_cs_chg_duplex : u8_duplex;
1054                 break;
1055
1056         case 16:
1057                 chip->n_bytes = 2;
1058                 chip->width = CFG_SPI_WORDSIZE16;
1059                 chip->read = chip->cs_change_per_word ?
1060                         u16_cs_chg_reader : u16_reader;
1061                 chip->write = chip->cs_change_per_word ?
1062                         u16_cs_chg_writer : u16_writer;
1063                 chip->duplex = chip->cs_change_per_word ?
1064                         u16_cs_chg_duplex : u16_duplex;
1065                 break;
1066
1067         default:
1068                 dev_err(&spi->dev, "%d bits_per_word is not supported\n",
1069                                 chip->bits_per_word);
1070                 kfree(chip);
1071                 return -ENODEV;
1072         }
1073
1074         dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d,",
1075                         spi->modalias, chip->width, chip->enable_dma);
1076         dev_dbg(&spi->dev, "ctl_reg is 0x%x, flag_reg is 0x%x\n",
1077                         chip->ctl_reg, chip->flag);
1078
1079         spi_set_ctldata(spi, chip);
1080
1081         return 0;
1082 }
1083
1084 /*
1085  * callback for spi framework.
1086  * clean driver specific data
1087  */
1088 static void cleanup(struct spi_device *spi)
1089 {
1090         struct chip_data *chip = spi_get_ctldata(spi);
1091
1092         kfree(chip);
1093 }
1094
1095 static inline int init_queue(struct driver_data *drv_data)
1096 {
1097         INIT_LIST_HEAD(&drv_data->queue);
1098         spin_lock_init(&drv_data->lock);
1099
1100         drv_data->run = QUEUE_STOPPED;
1101         drv_data->busy = 0;
1102
1103         /* init transfer tasklet */
1104         tasklet_init(&drv_data->pump_transfers,
1105                      pump_transfers, (unsigned long)drv_data);
1106
1107         /* init messages workqueue */
1108         INIT_WORK(&drv_data->pump_messages, pump_messages);
1109         drv_data->workqueue =
1110             create_singlethread_workqueue(drv_data->master->cdev.dev->bus_id);
1111         if (drv_data->workqueue == NULL)
1112                 return -EBUSY;
1113
1114         return 0;
1115 }
1116
1117 static inline int start_queue(struct driver_data *drv_data)
1118 {
1119         unsigned long flags;
1120
1121         spin_lock_irqsave(&drv_data->lock, flags);
1122
1123         if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
1124                 spin_unlock_irqrestore(&drv_data->lock, flags);
1125                 return -EBUSY;
1126         }
1127
1128         drv_data->run = QUEUE_RUNNING;
1129         drv_data->cur_msg = NULL;
1130         drv_data->cur_transfer = NULL;
1131         drv_data->cur_chip = NULL;
1132         spin_unlock_irqrestore(&drv_data->lock, flags);
1133
1134         queue_work(drv_data->workqueue, &drv_data->pump_messages);
1135
1136         return 0;
1137 }
1138
1139 static inline int stop_queue(struct driver_data *drv_data)
1140 {
1141         unsigned long flags;
1142         unsigned limit = 500;
1143         int status = 0;
1144
1145         spin_lock_irqsave(&drv_data->lock, flags);
1146
1147         /*
1148          * This is a bit lame, but is optimized for the common execution path.
1149          * A wait_queue on the drv_data->busy could be used, but then the common
1150          * execution path (pump_messages) would be required to call wake_up or
1151          * friends on every SPI message. Do this instead
1152          */
1153         drv_data->run = QUEUE_STOPPED;
1154         while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
1155                 spin_unlock_irqrestore(&drv_data->lock, flags);
1156                 msleep(10);
1157                 spin_lock_irqsave(&drv_data->lock, flags);
1158         }
1159
1160         if (!list_empty(&drv_data->queue) || drv_data->busy)
1161                 status = -EBUSY;
1162
1163         spin_unlock_irqrestore(&drv_data->lock, flags);
1164
1165         return status;
1166 }
1167
1168 static inline int destroy_queue(struct driver_data *drv_data)
1169 {
1170         int status;
1171
1172         status = stop_queue(drv_data);
1173         if (status != 0)
1174                 return status;
1175
1176         destroy_workqueue(drv_data->workqueue);
1177
1178         return 0;
1179 }
1180
1181 static int __init bfin5xx_spi_probe(struct platform_device *pdev)
1182 {
1183         struct device *dev = &pdev->dev;
1184         struct bfin5xx_spi_master *platform_info;
1185         struct spi_master *master;
1186         struct driver_data *drv_data = 0;
1187         int status = 0;
1188
1189         platform_info = dev->platform_data;
1190
1191         /* Allocate master with space for drv_data */
1192         master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
1193         if (!master) {
1194                 dev_err(&pdev->dev, "can not alloc spi_master\n");
1195                 return -ENOMEM;
1196         }
1197         drv_data = spi_master_get_devdata(master);
1198         drv_data->master = master;
1199         drv_data->master_info = platform_info;
1200         drv_data->pdev = pdev;
1201
1202         master->bus_num = pdev->id;
1203         master->num_chipselect = platform_info->num_chipselect;
1204         master->cleanup = cleanup;
1205         master->setup = setup;
1206         master->transfer = transfer;
1207
1208         /* Initial and start queue */
1209         status = init_queue(drv_data);
1210         if (status != 0) {
1211                 dev_err(&pdev->dev, "problem initializing queue\n");
1212                 goto out_error_queue_alloc;
1213         }
1214         status = start_queue(drv_data);
1215         if (status != 0) {
1216                 dev_err(&pdev->dev, "problem starting queue\n");
1217                 goto out_error_queue_alloc;
1218         }
1219
1220         /* Register with the SPI framework */
1221         platform_set_drvdata(pdev, drv_data);
1222         status = spi_register_master(master);
1223         if (status != 0) {
1224                 dev_err(&pdev->dev, "problem registering spi master\n");
1225                 goto out_error_queue_alloc;
1226         }
1227         dev_dbg(&pdev->dev, "controller probe successfully\n");
1228         return status;
1229
1230       out_error_queue_alloc:
1231         destroy_queue(drv_data);
1232         spi_master_put(master);
1233         return status;
1234 }
1235
1236 /* stop hardware and remove the driver */
1237 static int __devexit bfin5xx_spi_remove(struct platform_device *pdev)
1238 {
1239         struct driver_data *drv_data = platform_get_drvdata(pdev);
1240         int status = 0;
1241
1242         if (!drv_data)
1243                 return 0;
1244
1245         /* Remove the queue */
1246         status = destroy_queue(drv_data);
1247         if (status != 0)
1248                 return status;
1249
1250         /* Disable the SSP at the peripheral and SOC level */
1251         bfin_spi_disable(drv_data);
1252
1253         /* Release DMA */
1254         if (drv_data->master_info->enable_dma) {
1255                 if (dma_channel_active(CH_SPI))
1256                         free_dma(CH_SPI);
1257         }
1258
1259         /* Disconnect from the SPI framework */
1260         spi_unregister_master(drv_data->master);
1261
1262         /* Prevent double remove */
1263         platform_set_drvdata(pdev, NULL);
1264
1265         return 0;
1266 }
1267
1268 #ifdef CONFIG_PM
1269 static int bfin5xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
1270 {
1271         struct driver_data *drv_data = platform_get_drvdata(pdev);
1272         int status = 0;
1273
1274         status = stop_queue(drv_data);
1275         if (status != 0)
1276                 return status;
1277
1278         /* stop hardware */
1279         bfin_spi_disable(drv_data);
1280
1281         return 0;
1282 }
1283
1284 static int bfin5xx_spi_resume(struct platform_device *pdev)
1285 {
1286         struct driver_data *drv_data = platform_get_drvdata(pdev);
1287         int status = 0;
1288
1289         /* Enable the SPI interface */
1290         bfin_spi_enable(drv_data);
1291
1292         /* Start the queue running */
1293         status = start_queue(drv_data);
1294         if (status != 0) {
1295                 dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
1296                 return status;
1297         }
1298
1299         return 0;
1300 }
1301 #else
1302 #define bfin5xx_spi_suspend NULL
1303 #define bfin5xx_spi_resume NULL
1304 #endif                          /* CONFIG_PM */
1305
1306 MODULE_ALIAS("bfin-spi-master");        /* for platform bus hotplug */
1307 static struct platform_driver bfin5xx_spi_driver = {
1308         .driver = {
1309                 .name   = "bfin-spi-master",
1310                 .owner  = THIS_MODULE,
1311         },
1312         .suspend        = bfin5xx_spi_suspend,
1313         .resume         = bfin5xx_spi_resume,
1314         .remove         = __devexit_p(bfin5xx_spi_remove),
1315 };
1316
1317 static int __init bfin5xx_spi_init(void)
1318 {
1319         return platform_driver_probe(&bfin5xx_spi_driver, bfin5xx_spi_probe);
1320 }
1321 module_init(bfin5xx_spi_init);
1322
1323 static void __exit bfin5xx_spi_exit(void)
1324 {
1325         platform_driver_unregister(&bfin5xx_spi_driver);
1326 }
1327 module_exit(bfin5xx_spi_exit);