Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[linux-2.6] / drivers / net / wan / dscc4.c
1 /*
2  * drivers/net/wan/dscc4/dscc4.c: a DSCC4 HDLC driver for Linux
3  *
4  * This software may be used and distributed according to the terms of the
5  * GNU General Public License.
6  *
7  * The author may be reached as romieu@cogenit.fr.
8  * Specific bug reports/asian food will be welcome.
9  *
10  * Special thanks to the nice people at CS-Telecom for the hardware and the
11  * access to the test/measure tools.
12  *
13  *
14  *                             Theory of Operation
15  *
16  * I. Board Compatibility
17  *
18  * This device driver is designed for the Siemens PEB20534 4 ports serial
19  * controller as found on Etinc PCISYNC cards. The documentation for the
20  * chipset is available at http://www.infineon.com:
21  * - Data Sheet "DSCC4, DMA Supported Serial Communication Controller with
22  * 4 Channels, PEB 20534 Version 2.1, PEF 20534 Version 2.1";
23  * - Application Hint "Management of DSCC4 on-chip FIFO resources".
24  * - Errata sheet DS5 (courtesy of Michael Skerritt).
25  * Jens David has built an adapter based on the same chipset. Take a look
26  * at http://www.afthd.tu-darmstadt.de/~dg1kjd/pciscc4 for a specific
27  * driver.
28  * Sample code (2 revisions) is available at Infineon.
29  *
30  * II. Board-specific settings
31  *
32  * Pcisync can transmit some clock signal to the outside world on the
33  * *first two* ports provided you put a quartz and a line driver on it and
34  * remove the jumpers. The operation is described on Etinc web site. If you
35  * go DCE on these ports, don't forget to use an adequate cable.
36  *
37  * Sharing of the PCI interrupt line for this board is possible.
38  *
39  * III. Driver operation
40  *
41  * The rx/tx operations are based on a linked list of descriptors. The driver
42  * doesn't use HOLD mode any more. HOLD mode is definitely buggy and the more
43  * I tried to fix it, the more it started to look like (convoluted) software
44  * mutation of LxDA method. Errata sheet DS5 suggests to use LxDA: consider
45  * this a rfc2119 MUST.
46  *
47  * Tx direction
48  * When the tx ring is full, the xmit routine issues a call to netdev_stop.
49  * The device is supposed to be enabled again during an ALLS irq (we could
50  * use HI but as it's easy to lose events, it's fscked).
51  *
52  * Rx direction
53  * The received frames aren't supposed to span over multiple receiving areas.
54  * I may implement it some day but it isn't the highest ranked item.
55  *
56  * IV. Notes
57  * The current error (XDU, RFO) recovery code is untested.
58  * So far, RDO takes his RX channel down and the right sequence to enable it
59  * again is still a mistery. If RDO happens, plan a reboot. More details
60  * in the code (NB: as this happens, TX still works).
61  * Don't mess the cables during operation, especially on DTE ports. I don't
62  * suggest it for DCE either but at least one can get some messages instead
63  * of a complete instant freeze.
64  * Tests are done on Rev. 20 of the silicium. The RDO handling changes with
65  * the documentation/chipset releases.
66  *
67  * TODO:
68  * - test X25.
69  * - use polling at high irq/s,
70  * - performance analysis,
71  * - endianness.
72  *
73  * 2001/12/10   Daniela Squassoni  <daniela@cyclades.com>
74  * - Contribution to support the new generic HDLC layer.
75  *
76  * 2002/01      Ueimor
77  * - old style interface removal
78  * - dscc4_release_ring fix (related to DMA mapping)
79  * - hard_start_xmit fix (hint: TxSizeMax)
80  * - misc crapectomy.
81  */
82
83 #include <linux/module.h>
84 #include <linux/types.h>
85 #include <linux/errno.h>
86 #include <linux/list.h>
87 #include <linux/ioport.h>
88 #include <linux/pci.h>
89 #include <linux/kernel.h>
90 #include <linux/mm.h>
91
92 #include <asm/system.h>
93 #include <asm/cache.h>
94 #include <asm/byteorder.h>
95 #include <asm/uaccess.h>
96 #include <asm/io.h>
97 #include <asm/irq.h>
98
99 #include <linux/init.h>
100 #include <linux/string.h>
101
102 #include <linux/if_arp.h>
103 #include <linux/netdevice.h>
104 #include <linux/skbuff.h>
105 #include <linux/delay.h>
106 #include <linux/hdlc.h>
107 #include <linux/mutex.h>
108
109 /* Version */
110 static const char version[] = "$Id: dscc4.c,v 1.173 2003/09/20 23:55:34 romieu Exp $ for Linux\n";
111 static int debug;
112 static int quartz;
113
114 #ifdef CONFIG_DSCC4_PCI_RST
115 static DEFINE_MUTEX(dscc4_mutex);
116 static u32 dscc4_pci_config_store[16];
117 #endif
118
119 #define DRV_NAME        "dscc4"
120
121 #undef DSCC4_POLLING
122
123 /* Module parameters */
124
125 MODULE_AUTHOR("Maintainer: Francois Romieu <romieu@cogenit.fr>");
126 MODULE_DESCRIPTION("Siemens PEB20534 PCI Controler");
127 MODULE_LICENSE("GPL");
128 module_param(debug, int, 0);
129 MODULE_PARM_DESC(debug,"Enable/disable extra messages");
130 module_param(quartz, int, 0);
131 MODULE_PARM_DESC(quartz,"If present, on-board quartz frequency (Hz)");
132
133 /* Structures */
134
135 struct thingie {
136         int define;
137         u32 bits;
138 };
139
140 struct TxFD {
141         __le32 state;
142         __le32 next;
143         __le32 data;
144         __le32 complete;
145         u32 jiffies; /* Allows sizeof(TxFD) == sizeof(RxFD) + extra hack */
146                      /* FWIW, datasheet calls that "dummy" and says that card
147                       * never looks at it; neither does the driver */
148 };
149
150 struct RxFD {
151         __le32 state1;
152         __le32 next;
153         __le32 data;
154         __le32 state2;
155         __le32 end;
156 };
157
158 #define DUMMY_SKB_SIZE          64
159 #define TX_LOW                  8
160 #define TX_RING_SIZE            32
161 #define RX_RING_SIZE            32
162 #define TX_TOTAL_SIZE           TX_RING_SIZE*sizeof(struct TxFD)
163 #define RX_TOTAL_SIZE           RX_RING_SIZE*sizeof(struct RxFD)
164 #define IRQ_RING_SIZE           64              /* Keep it a multiple of 32 */
165 #define TX_TIMEOUT              (HZ/10)
166 #define DSCC4_HZ_MAX            33000000
167 #define BRR_DIVIDER_MAX         64*0x00004000   /* Cf errata DS5 p.10 */
168 #define dev_per_card            4
169 #define SCC_REGISTERS_MAX       23              /* Cf errata DS5 p.4 */
170
171 #define SOURCE_ID(flags)        (((flags) >> 28) & 0x03)
172 #define TO_SIZE(state)          (((state) >> 16) & 0x1fff)
173
174 /*
175  * Given the operating range of Linux HDLC, the 2 defines below could be
176  * made simpler. However they are a fine reminder for the limitations of
177  * the driver: it's better to stay < TxSizeMax and < RxSizeMax.
178  */
179 #define TO_STATE_TX(len)        cpu_to_le32(((len) & TxSizeMax) << 16)
180 #define TO_STATE_RX(len)        cpu_to_le32((RX_MAX(len) % RxSizeMax) << 16)
181 #define RX_MAX(len)             ((((len) >> 5) + 1) << 5)       /* Cf RLCR */
182 #define SCC_REG_START(dpriv)    (SCC_START+(dpriv->dev_id)*SCC_OFFSET)
183
184 struct dscc4_pci_priv {
185         __le32 *iqcfg;
186         int cfg_cur;
187         spinlock_t lock;
188         struct pci_dev *pdev;
189
190         struct dscc4_dev_priv *root;
191         dma_addr_t iqcfg_dma;
192         u32 xtal_hz;
193 };
194
195 struct dscc4_dev_priv {
196         struct sk_buff *rx_skbuff[RX_RING_SIZE];
197         struct sk_buff *tx_skbuff[TX_RING_SIZE];
198
199         struct RxFD *rx_fd;
200         struct TxFD *tx_fd;
201         __le32 *iqrx;
202         __le32 *iqtx;
203
204         /* FIXME: check all the volatile are required */
205         volatile u32 tx_current;
206         u32 rx_current;
207         u32 iqtx_current;
208         u32 iqrx_current;
209
210         volatile u32 tx_dirty;
211         volatile u32 ltda;
212         u32 rx_dirty;
213         u32 lrda;
214
215         dma_addr_t tx_fd_dma;
216         dma_addr_t rx_fd_dma;
217         dma_addr_t iqtx_dma;
218         dma_addr_t iqrx_dma;
219
220         u32 scc_regs[SCC_REGISTERS_MAX]; /* Cf errata DS5 p.4 */
221
222         struct timer_list timer;
223
224         struct dscc4_pci_priv *pci_priv;
225         spinlock_t lock;
226
227         int dev_id;
228         volatile u32 flags;
229         u32 timer_help;
230
231         unsigned short encoding;
232         unsigned short parity;
233         struct net_device *dev;
234         sync_serial_settings settings;
235         void __iomem *base_addr;
236         u32 __pad __attribute__ ((aligned (4)));
237 };
238
239 /* GLOBAL registers definitions */
240 #define GCMDR   0x00
241 #define GSTAR   0x04
242 #define GMODE   0x08
243 #define IQLENR0 0x0C
244 #define IQLENR1 0x10
245 #define IQRX0   0x14
246 #define IQTX0   0x24
247 #define IQCFG   0x3c
248 #define FIFOCR1 0x44
249 #define FIFOCR2 0x48
250 #define FIFOCR3 0x4c
251 #define FIFOCR4 0x34
252 #define CH0CFG  0x50
253 #define CH0BRDA 0x54
254 #define CH0BTDA 0x58
255 #define CH0FRDA 0x98
256 #define CH0FTDA 0xb0
257 #define CH0LRDA 0xc8
258 #define CH0LTDA 0xe0
259
260 /* SCC registers definitions */
261 #define SCC_START       0x0100
262 #define SCC_OFFSET      0x80
263 #define CMDR    0x00
264 #define STAR    0x04
265 #define CCR0    0x08
266 #define CCR1    0x0c
267 #define CCR2    0x10
268 #define BRR     0x2C
269 #define RLCR    0x40
270 #define IMR     0x54
271 #define ISR     0x58
272
273 #define GPDIR   0x0400
274 #define GPDATA  0x0404
275 #define GPIM    0x0408
276
277 /* Bit masks */
278 #define EncodingMask    0x00700000
279 #define CrcMask         0x00000003
280
281 #define IntRxScc0       0x10000000
282 #define IntTxScc0       0x01000000
283
284 #define TxPollCmd       0x00000400
285 #define RxActivate      0x08000000
286 #define MTFi            0x04000000
287 #define Rdr             0x00400000
288 #define Rdt             0x00200000
289 #define Idr             0x00100000
290 #define Idt             0x00080000
291 #define TxSccRes        0x01000000
292 #define RxSccRes        0x00010000
293 #define TxSizeMax       0x1fff          /* Datasheet DS1 - 11.1.1.1 */
294 #define RxSizeMax       0x1ffc          /* Datasheet DS1 - 11.1.2.1 */
295
296 #define Ccr0ClockMask   0x0000003f
297 #define Ccr1LoopMask    0x00000200
298 #define IsrMask         0x000fffff
299 #define BrrExpMask      0x00000f00
300 #define BrrMultMask     0x0000003f
301 #define EncodingMask    0x00700000
302 #define Hold            cpu_to_le32(0x40000000)
303 #define SccBusy         0x10000000
304 #define PowerUp         0x80000000
305 #define Vis             0x00001000
306 #define FrameOk         (FrameVfr | FrameCrc)
307 #define FrameVfr        0x80
308 #define FrameRdo        0x40
309 #define FrameCrc        0x20
310 #define FrameRab        0x10
311 #define FrameAborted    cpu_to_le32(0x00000200)
312 #define FrameEnd        cpu_to_le32(0x80000000)
313 #define DataComplete    cpu_to_le32(0x40000000)
314 #define LengthCheck     0x00008000
315 #define SccEvt          0x02000000
316 #define NoAck           0x00000200
317 #define Action          0x00000001
318 #define HiDesc          cpu_to_le32(0x20000000)
319
320 /* SCC events */
321 #define RxEvt           0xf0000000
322 #define TxEvt           0x0f000000
323 #define Alls            0x00040000
324 #define Xdu             0x00010000
325 #define Cts             0x00004000
326 #define Xmr             0x00002000
327 #define Xpr             0x00001000
328 #define Rdo             0x00000080
329 #define Rfs             0x00000040
330 #define Cd              0x00000004
331 #define Rfo             0x00000002
332 #define Flex            0x00000001
333
334 /* DMA core events */
335 #define Cfg             0x00200000
336 #define Hi              0x00040000
337 #define Fi              0x00020000
338 #define Err             0x00010000
339 #define Arf             0x00000002
340 #define ArAck           0x00000001
341
342 /* State flags */
343 #define Ready           0x00000000
344 #define NeedIDR         0x00000001
345 #define NeedIDT         0x00000002
346 #define RdoSet          0x00000004
347 #define FakeReset       0x00000008
348
349 /* Don't mask RDO. Ever. */
350 #ifdef DSCC4_POLLING
351 #define EventsMask      0xfffeef7f
352 #else
353 #define EventsMask      0xfffa8f7a
354 #endif
355
356 /* Functions prototypes */
357 static void dscc4_rx_irq(struct dscc4_pci_priv *, struct dscc4_dev_priv *);
358 static void dscc4_tx_irq(struct dscc4_pci_priv *, struct dscc4_dev_priv *);
359 static int dscc4_found1(struct pci_dev *, void __iomem *ioaddr);
360 static int dscc4_init_one(struct pci_dev *, const struct pci_device_id *ent);
361 static int dscc4_open(struct net_device *);
362 static int dscc4_start_xmit(struct sk_buff *, struct net_device *);
363 static int dscc4_close(struct net_device *);
364 static int dscc4_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
365 static int dscc4_init_ring(struct net_device *);
366 static void dscc4_release_ring(struct dscc4_dev_priv *);
367 static void dscc4_timer(unsigned long);
368 static void dscc4_tx_timeout(struct net_device *);
369 static irqreturn_t dscc4_irq(int irq, void *dev_id);
370 static int dscc4_hdlc_attach(struct net_device *, unsigned short, unsigned short);
371 static int dscc4_set_iface(struct dscc4_dev_priv *, struct net_device *);
372 #ifdef DSCC4_POLLING
373 static int dscc4_tx_poll(struct dscc4_dev_priv *, struct net_device *);
374 #endif
375
376 static inline struct dscc4_dev_priv *dscc4_priv(struct net_device *dev)
377 {
378         return dev_to_hdlc(dev)->priv;
379 }
380
381 static inline struct net_device *dscc4_to_dev(struct dscc4_dev_priv *p)
382 {
383         return p->dev;
384 }
385
386 static void scc_patchl(u32 mask, u32 value, struct dscc4_dev_priv *dpriv,
387                         struct net_device *dev, int offset)
388 {
389         u32 state;
390
391         /* Cf scc_writel for concern regarding thread-safety */
392         state = dpriv->scc_regs[offset >> 2];
393         state &= ~mask;
394         state |= value;
395         dpriv->scc_regs[offset >> 2] = state;
396         writel(state, dpriv->base_addr + SCC_REG_START(dpriv) + offset);
397 }
398
399 static void scc_writel(u32 bits, struct dscc4_dev_priv *dpriv,
400                        struct net_device *dev, int offset)
401 {
402         /*
403          * Thread-UNsafe.
404          * As of 2002/02/16, there are no thread racing for access.
405          */
406         dpriv->scc_regs[offset >> 2] = bits;
407         writel(bits, dpriv->base_addr + SCC_REG_START(dpriv) + offset);
408 }
409
410 static inline u32 scc_readl(struct dscc4_dev_priv *dpriv, int offset)
411 {
412         return dpriv->scc_regs[offset >> 2];
413 }
414
415 static u32 scc_readl_star(struct dscc4_dev_priv *dpriv, struct net_device *dev)
416 {
417         /* Cf errata DS5 p.4 */
418         readl(dpriv->base_addr + SCC_REG_START(dpriv) + STAR);
419         return readl(dpriv->base_addr + SCC_REG_START(dpriv) + STAR);
420 }
421
422 static inline void dscc4_do_tx(struct dscc4_dev_priv *dpriv,
423                                struct net_device *dev)
424 {
425         dpriv->ltda = dpriv->tx_fd_dma +
426                       ((dpriv->tx_current-1)%TX_RING_SIZE)*sizeof(struct TxFD);
427         writel(dpriv->ltda, dpriv->base_addr + CH0LTDA + dpriv->dev_id*4);
428         /* Flush posted writes *NOW* */
429         readl(dpriv->base_addr + CH0LTDA + dpriv->dev_id*4);
430 }
431
432 static inline void dscc4_rx_update(struct dscc4_dev_priv *dpriv,
433                                    struct net_device *dev)
434 {
435         dpriv->lrda = dpriv->rx_fd_dma +
436                       ((dpriv->rx_dirty - 1)%RX_RING_SIZE)*sizeof(struct RxFD);
437         writel(dpriv->lrda, dpriv->base_addr + CH0LRDA + dpriv->dev_id*4);
438 }
439
440 static inline unsigned int dscc4_tx_done(struct dscc4_dev_priv *dpriv)
441 {
442         return dpriv->tx_current == dpriv->tx_dirty;
443 }
444
445 static inline unsigned int dscc4_tx_quiescent(struct dscc4_dev_priv *dpriv,
446                                               struct net_device *dev)
447 {
448         return readl(dpriv->base_addr + CH0FTDA + dpriv->dev_id*4) == dpriv->ltda;
449 }
450
451 static int state_check(u32 state, struct dscc4_dev_priv *dpriv,
452                        struct net_device *dev, const char *msg)
453 {
454         int ret = 0;
455
456         if (debug > 1) {
457         if (SOURCE_ID(state) != dpriv->dev_id) {
458                 printk(KERN_DEBUG "%s (%s): Source Id=%d, state=%08x\n",
459                        dev->name, msg, SOURCE_ID(state), state );
460                         ret = -1;
461         }
462         if (state & 0x0df80c00) {
463                 printk(KERN_DEBUG "%s (%s): state=%08x (UFO alert)\n",
464                        dev->name, msg, state);
465                         ret = -1;
466         }
467         }
468         return ret;
469 }
470
471 static void dscc4_tx_print(struct net_device *dev,
472                            struct dscc4_dev_priv *dpriv,
473                            char *msg)
474 {
475         printk(KERN_DEBUG "%s: tx_current=%02d tx_dirty=%02d (%s)\n",
476                dev->name, dpriv->tx_current, dpriv->tx_dirty, msg);
477 }
478
479 static void dscc4_release_ring(struct dscc4_dev_priv *dpriv)
480 {
481         struct pci_dev *pdev = dpriv->pci_priv->pdev;
482         struct TxFD *tx_fd = dpriv->tx_fd;
483         struct RxFD *rx_fd = dpriv->rx_fd;
484         struct sk_buff **skbuff;
485         int i;
486
487         pci_free_consistent(pdev, TX_TOTAL_SIZE, tx_fd, dpriv->tx_fd_dma);
488         pci_free_consistent(pdev, RX_TOTAL_SIZE, rx_fd, dpriv->rx_fd_dma);
489
490         skbuff = dpriv->tx_skbuff;
491         for (i = 0; i < TX_RING_SIZE; i++) {
492                 if (*skbuff) {
493                         pci_unmap_single(pdev, le32_to_cpu(tx_fd->data),
494                                 (*skbuff)->len, PCI_DMA_TODEVICE);
495                         dev_kfree_skb(*skbuff);
496                 }
497                 skbuff++;
498                 tx_fd++;
499         }
500
501         skbuff = dpriv->rx_skbuff;
502         for (i = 0; i < RX_RING_SIZE; i++) {
503                 if (*skbuff) {
504                         pci_unmap_single(pdev, le32_to_cpu(rx_fd->data),
505                                 RX_MAX(HDLC_MAX_MRU), PCI_DMA_FROMDEVICE);
506                         dev_kfree_skb(*skbuff);
507                 }
508                 skbuff++;
509                 rx_fd++;
510         }
511 }
512
513 static inline int try_get_rx_skb(struct dscc4_dev_priv *dpriv,
514                                  struct net_device *dev)
515 {
516         unsigned int dirty = dpriv->rx_dirty%RX_RING_SIZE;
517         struct RxFD *rx_fd = dpriv->rx_fd + dirty;
518         const int len = RX_MAX(HDLC_MAX_MRU);
519         struct sk_buff *skb;
520         int ret = 0;
521
522         skb = dev_alloc_skb(len);
523         dpriv->rx_skbuff[dirty] = skb;
524         if (skb) {
525                 skb->protocol = hdlc_type_trans(skb, dev);
526                 rx_fd->data = cpu_to_le32(pci_map_single(dpriv->pci_priv->pdev,
527                                           skb->data, len, PCI_DMA_FROMDEVICE));
528         } else {
529                 rx_fd->data = 0;
530                 ret = -1;
531         }
532         return ret;
533 }
534
535 /*
536  * IRQ/thread/whatever safe
537  */
538 static int dscc4_wait_ack_cec(struct dscc4_dev_priv *dpriv,
539                               struct net_device *dev, char *msg)
540 {
541         s8 i = 0;
542
543         do {
544                 if (!(scc_readl_star(dpriv, dev) & SccBusy)) {
545                         printk(KERN_DEBUG "%s: %s ack (%d try)\n", dev->name,
546                                msg, i);
547                         goto done;
548                 }
549                 schedule_timeout_uninterruptible(10);
550                 rmb();
551         } while (++i > 0);
552         printk(KERN_ERR "%s: %s timeout\n", dev->name, msg);
553 done:
554         return (i >= 0) ? i : -EAGAIN;
555 }
556
557 static int dscc4_do_action(struct net_device *dev, char *msg)
558 {
559         void __iomem *ioaddr = dscc4_priv(dev)->base_addr;
560         s16 i = 0;
561
562         writel(Action, ioaddr + GCMDR);
563         ioaddr += GSTAR;
564         do {
565                 u32 state = readl(ioaddr);
566
567                 if (state & ArAck) {
568                         printk(KERN_DEBUG "%s: %s ack\n", dev->name, msg);
569                         writel(ArAck, ioaddr);
570                         goto done;
571                 } else if (state & Arf) {
572                         printk(KERN_ERR "%s: %s failed\n", dev->name, msg);
573                         writel(Arf, ioaddr);
574                         i = -1;
575                         goto done;
576         }
577                 rmb();
578         } while (++i > 0);
579         printk(KERN_ERR "%s: %s timeout\n", dev->name, msg);
580 done:
581         return i;
582 }
583
584 static inline int dscc4_xpr_ack(struct dscc4_dev_priv *dpriv)
585 {
586         int cur = dpriv->iqtx_current%IRQ_RING_SIZE;
587         s8 i = 0;
588
589         do {
590                 if (!(dpriv->flags & (NeedIDR | NeedIDT)) ||
591                     (dpriv->iqtx[cur] & cpu_to_le32(Xpr)))
592                         break;
593                 smp_rmb();
594                 schedule_timeout_uninterruptible(10);
595         } while (++i > 0);
596
597         return (i >= 0 ) ? i : -EAGAIN;
598 }
599
600 #if 0 /* dscc4_{rx/tx}_reset are both unreliable - more tweak needed */
601 static void dscc4_rx_reset(struct dscc4_dev_priv *dpriv, struct net_device *dev)
602 {
603         unsigned long flags;
604
605         spin_lock_irqsave(&dpriv->pci_priv->lock, flags);
606         /* Cf errata DS5 p.6 */
607         writel(0x00000000, dpriv->base_addr + CH0LRDA + dpriv->dev_id*4);
608         scc_patchl(PowerUp, 0, dpriv, dev, CCR0);
609         readl(dpriv->base_addr + CH0LRDA + dpriv->dev_id*4);
610         writel(MTFi|Rdr, dpriv->base_addr + dpriv->dev_id*0x0c + CH0CFG);
611         writel(Action, dpriv->base_addr + GCMDR);
612         spin_unlock_irqrestore(&dpriv->pci_priv->lock, flags);
613 }
614
615 #endif
616
617 #if 0
618 static void dscc4_tx_reset(struct dscc4_dev_priv *dpriv, struct net_device *dev)
619 {
620         u16 i = 0;
621
622         /* Cf errata DS5 p.7 */
623         scc_patchl(PowerUp, 0, dpriv, dev, CCR0);
624         scc_writel(0x00050000, dpriv, dev, CCR2);
625         /*
626          * Must be longer than the time required to fill the fifo.
627          */
628         while (!dscc4_tx_quiescent(dpriv, dev) && ++i) {
629                 udelay(1);
630                 wmb();
631         }
632
633         writel(MTFi|Rdt, dpriv->base_addr + dpriv->dev_id*0x0c + CH0CFG);
634         if (dscc4_do_action(dev, "Rdt") < 0)
635                 printk(KERN_ERR "%s: Tx reset failed\n", dev->name);
636 }
637 #endif
638
639 /* TODO: (ab)use this function to refill a completely depleted RX ring. */
640 static inline void dscc4_rx_skb(struct dscc4_dev_priv *dpriv,
641                                 struct net_device *dev)
642 {
643         struct RxFD *rx_fd = dpriv->rx_fd + dpriv->rx_current%RX_RING_SIZE;
644         struct pci_dev *pdev = dpriv->pci_priv->pdev;
645         struct sk_buff *skb;
646         int pkt_len;
647
648         skb = dpriv->rx_skbuff[dpriv->rx_current++%RX_RING_SIZE];
649         if (!skb) {
650                 printk(KERN_DEBUG "%s: skb=0 (%s)\n", dev->name, __func__);
651                 goto refill;
652         }
653         pkt_len = TO_SIZE(le32_to_cpu(rx_fd->state2));
654         pci_unmap_single(pdev, le32_to_cpu(rx_fd->data),
655                          RX_MAX(HDLC_MAX_MRU), PCI_DMA_FROMDEVICE);
656         if ((skb->data[--pkt_len] & FrameOk) == FrameOk) {
657                 dev->stats.rx_packets++;
658                 dev->stats.rx_bytes += pkt_len;
659                 skb_put(skb, pkt_len);
660                 if (netif_running(dev))
661                         skb->protocol = hdlc_type_trans(skb, dev);
662                 netif_rx(skb);
663         } else {
664                 if (skb->data[pkt_len] & FrameRdo)
665                         dev->stats.rx_fifo_errors++;
666                 else if (!(skb->data[pkt_len] | ~FrameCrc))
667                         dev->stats.rx_crc_errors++;
668                 else if (!(skb->data[pkt_len] | ~(FrameVfr | FrameRab)))
669                         dev->stats.rx_length_errors++;
670                 else
671                         dev->stats.rx_errors++;
672                 dev_kfree_skb_irq(skb);
673         }
674 refill:
675         while ((dpriv->rx_dirty - dpriv->rx_current) % RX_RING_SIZE) {
676                 if (try_get_rx_skb(dpriv, dev) < 0)
677                         break;
678                 dpriv->rx_dirty++;
679         }
680         dscc4_rx_update(dpriv, dev);
681         rx_fd->state2 = 0x00000000;
682         rx_fd->end = cpu_to_le32(0xbabeface);
683 }
684
685 static void dscc4_free1(struct pci_dev *pdev)
686 {
687         struct dscc4_pci_priv *ppriv;
688         struct dscc4_dev_priv *root;
689         int i;
690
691         ppriv = pci_get_drvdata(pdev);
692         root = ppriv->root;
693
694         for (i = 0; i < dev_per_card; i++)
695                 unregister_hdlc_device(dscc4_to_dev(root + i));
696
697         pci_set_drvdata(pdev, NULL);
698
699         for (i = 0; i < dev_per_card; i++)
700                 free_netdev(root[i].dev);
701         kfree(root);
702         kfree(ppriv);
703 }
704
705 static int __devinit dscc4_init_one(struct pci_dev *pdev,
706                                   const struct pci_device_id *ent)
707 {
708         struct dscc4_pci_priv *priv;
709         struct dscc4_dev_priv *dpriv;
710         void __iomem *ioaddr;
711         int i, rc;
712
713         printk(KERN_DEBUG "%s", version);
714
715         rc = pci_enable_device(pdev);
716         if (rc < 0)
717                 goto out;
718
719         rc = pci_request_region(pdev, 0, "registers");
720         if (rc < 0) {
721                 printk(KERN_ERR "%s: can't reserve MMIO region (regs)\n",
722                         DRV_NAME);
723                 goto err_disable_0;
724         }
725         rc = pci_request_region(pdev, 1, "LBI interface");
726         if (rc < 0) {
727                 printk(KERN_ERR "%s: can't reserve MMIO region (lbi)\n",
728                         DRV_NAME);
729                 goto err_free_mmio_region_1;
730         }
731
732         ioaddr = pci_ioremap_bar(pdev, 0);
733         if (!ioaddr) {
734                 printk(KERN_ERR "%s: cannot remap MMIO region %llx @ %llx\n",
735                         DRV_NAME, (unsigned long long)pci_resource_len(pdev, 0),
736                         (unsigned long long)pci_resource_start(pdev, 0));
737                 rc = -EIO;
738                 goto err_free_mmio_regions_2;
739         }
740         printk(KERN_DEBUG "Siemens DSCC4, MMIO at %#llx (regs), %#llx (lbi), IRQ %d\n",
741                 (unsigned long long)pci_resource_start(pdev, 0),
742                 (unsigned long long)pci_resource_start(pdev, 1), pdev->irq);
743
744         /* Cf errata DS5 p.2 */
745         pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xf8);
746         pci_set_master(pdev);
747
748         rc = dscc4_found1(pdev, ioaddr);
749         if (rc < 0)
750                 goto err_iounmap_3;
751
752         priv = pci_get_drvdata(pdev);
753
754         rc = request_irq(pdev->irq, dscc4_irq, IRQF_SHARED, DRV_NAME, priv->root);
755         if (rc < 0) {
756                 printk(KERN_WARNING "%s: IRQ %d busy\n", DRV_NAME, pdev->irq);
757                 goto err_release_4;
758         }
759
760         /* power up/little endian/dma core controlled via lrda/ltda */
761         writel(0x00000001, ioaddr + GMODE);
762         /* Shared interrupt queue */
763         {
764                 u32 bits;
765
766                 bits = (IRQ_RING_SIZE >> 5) - 1;
767                 bits |= bits << 4;
768                 bits |= bits << 8;
769                 bits |= bits << 16;
770                 writel(bits, ioaddr + IQLENR0);
771         }
772         /* Global interrupt queue */
773         writel((u32)(((IRQ_RING_SIZE >> 5) - 1) << 20), ioaddr + IQLENR1);
774         priv->iqcfg = (__le32 *) pci_alloc_consistent(pdev,
775                 IRQ_RING_SIZE*sizeof(__le32), &priv->iqcfg_dma);
776         if (!priv->iqcfg)
777                 goto err_free_irq_5;
778         writel(priv->iqcfg_dma, ioaddr + IQCFG);
779
780         rc = -ENOMEM;
781
782         /*
783          * SCC 0-3 private rx/tx irq structures
784          * IQRX/TXi needs to be set soon. Learned it the hard way...
785          */
786         for (i = 0; i < dev_per_card; i++) {
787                 dpriv = priv->root + i;
788                 dpriv->iqtx = (__le32 *) pci_alloc_consistent(pdev,
789                         IRQ_RING_SIZE*sizeof(u32), &dpriv->iqtx_dma);
790                 if (!dpriv->iqtx)
791                         goto err_free_iqtx_6;
792                 writel(dpriv->iqtx_dma, ioaddr + IQTX0 + i*4);
793         }
794         for (i = 0; i < dev_per_card; i++) {
795                 dpriv = priv->root + i;
796                 dpriv->iqrx = (__le32 *) pci_alloc_consistent(pdev,
797                         IRQ_RING_SIZE*sizeof(u32), &dpriv->iqrx_dma);
798                 if (!dpriv->iqrx)
799                         goto err_free_iqrx_7;
800                 writel(dpriv->iqrx_dma, ioaddr + IQRX0 + i*4);
801         }
802
803         /* Cf application hint. Beware of hard-lock condition on threshold. */
804         writel(0x42104000, ioaddr + FIFOCR1);
805         //writel(0x9ce69800, ioaddr + FIFOCR2);
806         writel(0xdef6d800, ioaddr + FIFOCR2);
807         //writel(0x11111111, ioaddr + FIFOCR4);
808         writel(0x18181818, ioaddr + FIFOCR4);
809         // FIXME: should depend on the chipset revision
810         writel(0x0000000e, ioaddr + FIFOCR3);
811
812         writel(0xff200001, ioaddr + GCMDR);
813
814         rc = 0;
815 out:
816         return rc;
817
818 err_free_iqrx_7:
819         while (--i >= 0) {
820                 dpriv = priv->root + i;
821                 pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32),
822                                     dpriv->iqrx, dpriv->iqrx_dma);
823         }
824         i = dev_per_card;
825 err_free_iqtx_6:
826         while (--i >= 0) {
827                 dpriv = priv->root + i;
828                 pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32),
829                                     dpriv->iqtx, dpriv->iqtx_dma);
830         }
831         pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32), priv->iqcfg,
832                             priv->iqcfg_dma);
833 err_free_irq_5:
834         free_irq(pdev->irq, priv->root);
835 err_release_4:
836         dscc4_free1(pdev);
837 err_iounmap_3:
838         iounmap (ioaddr);
839 err_free_mmio_regions_2:
840         pci_release_region(pdev, 1);
841 err_free_mmio_region_1:
842         pci_release_region(pdev, 0);
843 err_disable_0:
844         pci_disable_device(pdev);
845         goto out;
846 };
847
848 /*
849  * Let's hope the default values are decent enough to protect my
850  * feet from the user's gun - Ueimor
851  */
852 static void dscc4_init_registers(struct dscc4_dev_priv *dpriv,
853                                  struct net_device *dev)
854 {
855         /* No interrupts, SCC core disabled. Let's relax */
856         scc_writel(0x00000000, dpriv, dev, CCR0);
857
858         scc_writel(LengthCheck | (HDLC_MAX_MRU >> 5), dpriv, dev, RLCR);
859
860         /*
861          * No address recognition/crc-CCITT/cts enabled
862          * Shared flags transmission disabled - cf errata DS5 p.11
863          * Carrier detect disabled - cf errata p.14
864          * FIXME: carrier detection/polarity may be handled more gracefully.
865          */
866         scc_writel(0x02408000, dpriv, dev, CCR1);
867
868         /* crc not forwarded - Cf errata DS5 p.11 */
869         scc_writel(0x00050008 & ~RxActivate, dpriv, dev, CCR2);
870         // crc forwarded
871         //scc_writel(0x00250008 & ~RxActivate, dpriv, dev, CCR2);
872 }
873
874 static inline int dscc4_set_quartz(struct dscc4_dev_priv *dpriv, int hz)
875 {
876         int ret = 0;
877
878         if ((hz < 0) || (hz > DSCC4_HZ_MAX))
879                 ret = -EOPNOTSUPP;
880         else
881                 dpriv->pci_priv->xtal_hz = hz;
882
883         return ret;
884 }
885
886 static const struct net_device_ops dscc4_ops = {
887         .ndo_open       = dscc4_open,
888         .ndo_stop       = dscc4_close,
889         .ndo_change_mtu = hdlc_change_mtu,
890         .ndo_start_xmit = hdlc_start_xmit,
891         .ndo_do_ioctl   = dscc4_ioctl,
892         .ndo_tx_timeout = dscc4_tx_timeout,
893 };
894
895 static int dscc4_found1(struct pci_dev *pdev, void __iomem *ioaddr)
896 {
897         struct dscc4_pci_priv *ppriv;
898         struct dscc4_dev_priv *root;
899         int i, ret = -ENOMEM;
900
901         root = kcalloc(dev_per_card, sizeof(*root), GFP_KERNEL);
902         if (!root) {
903                 printk(KERN_ERR "%s: can't allocate data\n", DRV_NAME);
904                 goto err_out;
905         }
906
907         for (i = 0; i < dev_per_card; i++) {
908                 root[i].dev = alloc_hdlcdev(root + i);
909                 if (!root[i].dev)
910                         goto err_free_dev;
911         }
912
913         ppriv = kzalloc(sizeof(*ppriv), GFP_KERNEL);
914         if (!ppriv) {
915                 printk(KERN_ERR "%s: can't allocate private data\n", DRV_NAME);
916                 goto err_free_dev;
917         }
918
919         ppriv->root = root;
920         spin_lock_init(&ppriv->lock);
921
922         for (i = 0; i < dev_per_card; i++) {
923                 struct dscc4_dev_priv *dpriv = root + i;
924                 struct net_device *d = dscc4_to_dev(dpriv);
925                 hdlc_device *hdlc = dev_to_hdlc(d);
926
927                 d->base_addr = (unsigned long)ioaddr;
928                 d->irq = pdev->irq;
929                 d->netdev_ops = &dscc4_ops;
930                 d->watchdog_timeo = TX_TIMEOUT;
931                 SET_NETDEV_DEV(d, &pdev->dev);
932
933                 dpriv->dev_id = i;
934                 dpriv->pci_priv = ppriv;
935                 dpriv->base_addr = ioaddr;
936                 spin_lock_init(&dpriv->lock);
937
938                 hdlc->xmit = dscc4_start_xmit;
939                 hdlc->attach = dscc4_hdlc_attach;
940
941                 dscc4_init_registers(dpriv, d);
942                 dpriv->parity = PARITY_CRC16_PR0_CCITT;
943                 dpriv->encoding = ENCODING_NRZ;
944         
945                 ret = dscc4_init_ring(d);
946                 if (ret < 0)
947                         goto err_unregister;
948
949                 ret = register_hdlc_device(d);
950                 if (ret < 0) {
951                         printk(KERN_ERR "%s: unable to register\n", DRV_NAME);
952                         dscc4_release_ring(dpriv);
953                         goto err_unregister;
954                 }
955         }
956
957         ret = dscc4_set_quartz(root, quartz);
958         if (ret < 0)
959                 goto err_unregister;
960
961         pci_set_drvdata(pdev, ppriv);
962         return ret;
963
964 err_unregister:
965         while (i-- > 0) {
966                 dscc4_release_ring(root + i);
967                 unregister_hdlc_device(dscc4_to_dev(root + i));
968         }
969         kfree(ppriv);
970         i = dev_per_card;
971 err_free_dev:
972         while (i-- > 0)
973                 free_netdev(root[i].dev);
974         kfree(root);
975 err_out:
976         return ret;
977 };
978
979 /* FIXME: get rid of the unneeded code */
980 static void dscc4_timer(unsigned long data)
981 {
982         struct net_device *dev = (struct net_device *)data;
983         struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
984 //      struct dscc4_pci_priv *ppriv;
985
986         goto done;
987 done:
988         dpriv->timer.expires = jiffies + TX_TIMEOUT;
989         add_timer(&dpriv->timer);
990 }
991
992 static void dscc4_tx_timeout(struct net_device *dev)
993 {
994         /* FIXME: something is missing there */
995 }
996
997 static int dscc4_loopback_check(struct dscc4_dev_priv *dpriv)
998 {
999         sync_serial_settings *settings = &dpriv->settings;
1000
1001         if (settings->loopback && (settings->clock_type != CLOCK_INT)) {
1002                 struct net_device *dev = dscc4_to_dev(dpriv);
1003
1004                 printk(KERN_INFO "%s: loopback requires clock\n", dev->name);
1005                 return -1;
1006         }
1007         return 0;
1008 }
1009
1010 #ifdef CONFIG_DSCC4_PCI_RST
1011 /*
1012  * Some DSCC4-based cards wires the GPIO port and the PCI #RST pin together
1013  * so as to provide a safe way to reset the asic while not the whole machine
1014  * rebooting.
1015  *
1016  * This code doesn't need to be efficient. Keep It Simple
1017  */
1018 static void dscc4_pci_reset(struct pci_dev *pdev, void __iomem *ioaddr)
1019 {
1020         int i;
1021
1022         mutex_lock(&dscc4_mutex);
1023         for (i = 0; i < 16; i++)
1024                 pci_read_config_dword(pdev, i << 2, dscc4_pci_config_store + i);
1025
1026         /* Maximal LBI clock divider (who cares ?) and whole GPIO range. */
1027         writel(0x001c0000, ioaddr + GMODE);
1028         /* Configure GPIO port as output */
1029         writel(0x0000ffff, ioaddr + GPDIR);
1030         /* Disable interruption */
1031         writel(0x0000ffff, ioaddr + GPIM);
1032
1033         writel(0x0000ffff, ioaddr + GPDATA);
1034         writel(0x00000000, ioaddr + GPDATA);
1035
1036         /* Flush posted writes */
1037         readl(ioaddr + GSTAR);
1038
1039         schedule_timeout_uninterruptible(10);
1040
1041         for (i = 0; i < 16; i++)
1042                 pci_write_config_dword(pdev, i << 2, dscc4_pci_config_store[i]);
1043         mutex_unlock(&dscc4_mutex);
1044 }
1045 #else
1046 #define dscc4_pci_reset(pdev,ioaddr)    do {} while (0)
1047 #endif /* CONFIG_DSCC4_PCI_RST */
1048
1049 static int dscc4_open(struct net_device *dev)
1050 {
1051         struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
1052         struct dscc4_pci_priv *ppriv;
1053         int ret = -EAGAIN;
1054
1055         if ((dscc4_loopback_check(dpriv) < 0))
1056                 goto err;
1057
1058         if ((ret = hdlc_open(dev)))
1059                 goto err;
1060
1061         ppriv = dpriv->pci_priv;
1062
1063         /*
1064          * Due to various bugs, there is no way to reliably reset a
1065          * specific port (manufacturer's dependant special PCI #RST wiring
1066          * apart: it affects all ports). Thus the device goes in the best
1067          * silent mode possible at dscc4_close() time and simply claims to
1068          * be up if it's opened again. It still isn't possible to change
1069          * the HDLC configuration without rebooting but at least the ports
1070          * can be up/down ifconfig'ed without killing the host.
1071          */
1072         if (dpriv->flags & FakeReset) {
1073                 dpriv->flags &= ~FakeReset;
1074                 scc_patchl(0, PowerUp, dpriv, dev, CCR0);
1075                 scc_patchl(0, 0x00050000, dpriv, dev, CCR2);
1076                 scc_writel(EventsMask, dpriv, dev, IMR);
1077                 printk(KERN_INFO "%s: up again.\n", dev->name);
1078                 goto done;
1079         }
1080
1081         /* IDT+IDR during XPR */
1082         dpriv->flags = NeedIDR | NeedIDT;
1083
1084         scc_patchl(0, PowerUp | Vis, dpriv, dev, CCR0);
1085
1086         /*
1087          * The following is a bit paranoid...
1088          *
1089          * NB: the datasheet "...CEC will stay active if the SCC is in
1090          * power-down mode or..." and CCR2.RAC = 1 are two different
1091          * situations.
1092          */
1093         if (scc_readl_star(dpriv, dev) & SccBusy) {
1094                 printk(KERN_ERR "%s busy. Try later\n", dev->name);
1095                 ret = -EAGAIN;
1096                 goto err_out;
1097         } else
1098                 printk(KERN_INFO "%s: available. Good\n", dev->name);
1099
1100         scc_writel(EventsMask, dpriv, dev, IMR);
1101
1102         /* Posted write is flushed in the wait_ack loop */
1103         scc_writel(TxSccRes | RxSccRes, dpriv, dev, CMDR);
1104
1105         if ((ret = dscc4_wait_ack_cec(dpriv, dev, "Cec")) < 0)
1106                 goto err_disable_scc_events;
1107
1108         /*
1109          * I would expect XPR near CE completion (before ? after ?).
1110          * At worst, this code won't see a late XPR and people
1111          * will have to re-issue an ifconfig (this is harmless).
1112          * WARNING, a really missing XPR usually means a hardware
1113          * reset is needed. Suggestions anyone ?
1114          */
1115         if ((ret = dscc4_xpr_ack(dpriv)) < 0) {
1116                 printk(KERN_ERR "%s: %s timeout\n", DRV_NAME, "XPR");
1117                 goto err_disable_scc_events;
1118         }
1119         
1120         if (debug > 2)
1121                 dscc4_tx_print(dev, dpriv, "Open");
1122
1123 done:
1124         netif_start_queue(dev);
1125
1126         init_timer(&dpriv->timer);
1127         dpriv->timer.expires = jiffies + 10*HZ;
1128         dpriv->timer.data = (unsigned long)dev;
1129         dpriv->timer.function = &dscc4_timer;
1130         add_timer(&dpriv->timer);
1131         netif_carrier_on(dev);
1132
1133         return 0;
1134
1135 err_disable_scc_events:
1136         scc_writel(0xffffffff, dpriv, dev, IMR);
1137         scc_patchl(PowerUp | Vis, 0, dpriv, dev, CCR0);
1138 err_out:
1139         hdlc_close(dev);
1140 err:
1141         return ret;
1142 }
1143
1144 #ifdef DSCC4_POLLING
1145 static int dscc4_tx_poll(struct dscc4_dev_priv *dpriv, struct net_device *dev)
1146 {
1147         /* FIXME: it's gonna be easy (TM), for sure */
1148 }
1149 #endif /* DSCC4_POLLING */
1150
1151 static int dscc4_start_xmit(struct sk_buff *skb, struct net_device *dev)
1152 {
1153         struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
1154         struct dscc4_pci_priv *ppriv = dpriv->pci_priv;
1155         struct TxFD *tx_fd;
1156         int next;
1157
1158         next = dpriv->tx_current%TX_RING_SIZE;
1159         dpriv->tx_skbuff[next] = skb;
1160         tx_fd = dpriv->tx_fd + next;
1161         tx_fd->state = FrameEnd | TO_STATE_TX(skb->len);
1162         tx_fd->data = cpu_to_le32(pci_map_single(ppriv->pdev, skb->data, skb->len,
1163                                      PCI_DMA_TODEVICE));
1164         tx_fd->complete = 0x00000000;
1165         tx_fd->jiffies = jiffies;
1166         mb();
1167
1168 #ifdef DSCC4_POLLING
1169         spin_lock(&dpriv->lock);
1170         while (dscc4_tx_poll(dpriv, dev));
1171         spin_unlock(&dpriv->lock);
1172 #endif
1173
1174         dev->trans_start = jiffies;
1175
1176         if (debug > 2)
1177                 dscc4_tx_print(dev, dpriv, "Xmit");
1178         /* To be cleaned(unsigned int)/optimized. Later, ok ? */
1179         if (!((++dpriv->tx_current - dpriv->tx_dirty)%TX_RING_SIZE))
1180                 netif_stop_queue(dev);
1181
1182         if (dscc4_tx_quiescent(dpriv, dev))
1183                 dscc4_do_tx(dpriv, dev);
1184
1185         return 0;
1186 }
1187
1188 static int dscc4_close(struct net_device *dev)
1189 {
1190         struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
1191
1192         del_timer_sync(&dpriv->timer);
1193         netif_stop_queue(dev);
1194
1195         scc_patchl(PowerUp | Vis, 0, dpriv, dev, CCR0);
1196         scc_patchl(0x00050000, 0, dpriv, dev, CCR2);
1197         scc_writel(0xffffffff, dpriv, dev, IMR);
1198
1199         dpriv->flags |= FakeReset;
1200
1201         hdlc_close(dev);
1202
1203         return 0;
1204 }
1205
1206 static inline int dscc4_check_clock_ability(int port)
1207 {
1208         int ret = 0;
1209
1210 #ifdef CONFIG_DSCC4_PCISYNC
1211         if (port >= 2)
1212                 ret = -1;
1213 #endif
1214         return ret;
1215 }
1216
1217 /*
1218  * DS1 p.137: "There are a total of 13 different clocking modes..."
1219  *                                  ^^
1220  * Design choices:
1221  * - by default, assume a clock is provided on pin RxClk/TxClk (clock mode 0a).
1222  *   Clock mode 3b _should_ work but the testing seems to make this point
1223  *   dubious (DIY testing requires setting CCR0 at 0x00000033).
1224  *   This is supposed to provide least surprise "DTE like" behavior.
1225  * - if line rate is specified, clocks are assumed to be locally generated.
1226  *   A quartz must be available (on pin XTAL1). Modes 6b/7b are used. Choosing
1227  *   between these it automagically done according on the required frequency
1228  *   scaling. Of course some rounding may take place.
1229  * - no high speed mode (40Mb/s). May be trivial to do but I don't have an
1230  *   appropriate external clocking device for testing.
1231  * - no time-slot/clock mode 5: shameless lazyness.
1232  *
1233  * The clock signals wiring can be (is ?) manufacturer dependant. Good luck.
1234  *
1235  * BIG FAT WARNING: if the device isn't provided enough clocking signal, it
1236  * won't pass the init sequence. For example, straight back-to-back DTE without
1237  * external clock will fail when dscc4_open() (<- 'ifconfig hdlcx xxx') is
1238  * called.
1239  *
1240  * Typos lurk in datasheet (missing divier in clock mode 7a figure 51 p.153
1241  * DS0 for example)
1242  *
1243  * Clock mode related bits of CCR0:
1244  *     +------------ TOE: output TxClk (0b/2b/3a/3b/6b/7a/7b only)
1245  *     | +---------- SSEL: sub-mode select 0 -> a, 1 -> b
1246  *     | | +-------- High Speed: say 0
1247  *     | | | +-+-+-- Clock Mode: 0..7
1248  *     | | | | | |
1249  * -+-+-+-+-+-+-+-+
1250  * x|x|5|4|3|2|1|0| lower bits
1251  *
1252  * Division factor of BRR: k = (N+1)x2^M (total divider = 16xk in mode 6b)
1253  *            +-+-+-+------------------ M (0..15)
1254  *            | | | |     +-+-+-+-+-+-- N (0..63)
1255  *    0 0 0 0 | | | | 0 0 | | | | | |
1256  * ...-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1257  *    f|e|d|c|b|a|9|8|7|6|5|4|3|2|1|0| lower bits
1258  *
1259  */
1260 static int dscc4_set_clock(struct net_device *dev, u32 *bps, u32 *state)
1261 {
1262         struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
1263         int ret = -1;
1264         u32 brr;
1265
1266         *state &= ~Ccr0ClockMask;
1267         if (*bps) { /* Clock generated - required for DCE */
1268                 u32 n = 0, m = 0, divider;
1269                 int xtal;
1270
1271                 xtal = dpriv->pci_priv->xtal_hz;
1272                 if (!xtal)
1273                         goto done;
1274                 if (dscc4_check_clock_ability(dpriv->dev_id) < 0)
1275                         goto done;
1276                 divider = xtal / *bps;
1277                 if (divider > BRR_DIVIDER_MAX) {
1278                         divider >>= 4;
1279                         *state |= 0x00000036; /* Clock mode 6b (BRG/16) */
1280                 } else
1281                         *state |= 0x00000037; /* Clock mode 7b (BRG) */
1282                 if (divider >> 22) {
1283                         n = 63;
1284                         m = 15;
1285                 } else if (divider) {
1286                         /* Extraction of the 6 highest weighted bits */
1287                         m = 0;
1288                         while (0xffffffc0 & divider) {
1289                                 m++;
1290                                 divider >>= 1;
1291                         }
1292                         n = divider;
1293                 }
1294                 brr = (m << 8) | n;
1295                 divider = n << m;
1296                 if (!(*state & 0x00000001)) /* ?b mode mask => clock mode 6b */
1297                         divider <<= 4;
1298                 *bps = xtal / divider;
1299         } else {
1300                 /*
1301                  * External clock - DTE
1302                  * "state" already reflects Clock mode 0a (CCR0 = 0xzzzzzz00).
1303                  * Nothing more to be done
1304                  */
1305                 brr = 0;
1306         }
1307         scc_writel(brr, dpriv, dev, BRR);
1308         ret = 0;
1309 done:
1310         return ret;
1311 }
1312
1313 static int dscc4_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1314 {
1315         sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1316         struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
1317         const size_t size = sizeof(dpriv->settings);
1318         int ret = 0;
1319
1320         if (dev->flags & IFF_UP)
1321                 return -EBUSY;
1322
1323         if (cmd != SIOCWANDEV)
1324                 return -EOPNOTSUPP;
1325
1326         switch(ifr->ifr_settings.type) {
1327         case IF_GET_IFACE:
1328                 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1329                 if (ifr->ifr_settings.size < size) {
1330                         ifr->ifr_settings.size = size; /* data size wanted */
1331                         return -ENOBUFS;
1332                 }
1333                 if (copy_to_user(line, &dpriv->settings, size))
1334                         return -EFAULT;
1335                 break;
1336
1337         case IF_IFACE_SYNC_SERIAL:
1338                 if (!capable(CAP_NET_ADMIN))
1339                         return -EPERM;
1340
1341                 if (dpriv->flags & FakeReset) {
1342                         printk(KERN_INFO "%s: please reset the device"
1343                                " before this command\n", dev->name);
1344                         return -EPERM;
1345                 }
1346                 if (copy_from_user(&dpriv->settings, line, size))
1347                         return -EFAULT;
1348                 ret = dscc4_set_iface(dpriv, dev);
1349                 break;
1350
1351         default:
1352                 ret = hdlc_ioctl(dev, ifr, cmd);
1353                 break;
1354         }
1355
1356         return ret;
1357 }
1358
1359 static int dscc4_match(struct thingie *p, int value)
1360 {
1361         int i;
1362
1363         for (i = 0; p[i].define != -1; i++) {
1364                 if (value == p[i].define)
1365                         break;
1366         }
1367         if (p[i].define == -1)
1368                 return -1;
1369         else
1370                 return i;
1371 }
1372
1373 static int dscc4_clock_setting(struct dscc4_dev_priv *dpriv,
1374                                struct net_device *dev)
1375 {
1376         sync_serial_settings *settings = &dpriv->settings;
1377         int ret = -EOPNOTSUPP;
1378         u32 bps, state;
1379
1380         bps = settings->clock_rate;
1381         state = scc_readl(dpriv, CCR0);
1382         if (dscc4_set_clock(dev, &bps, &state) < 0)
1383                 goto done;
1384         if (bps) { /* DCE */
1385                 printk(KERN_DEBUG "%s: generated RxClk (DCE)\n", dev->name);
1386                 if (settings->clock_rate != bps) {
1387                         printk(KERN_DEBUG "%s: clock adjusted (%08d -> %08d)\n",
1388                                 dev->name, settings->clock_rate, bps);
1389                         settings->clock_rate = bps;
1390                 }
1391         } else { /* DTE */
1392                 state |= PowerUp | Vis;
1393                 printk(KERN_DEBUG "%s: external RxClk (DTE)\n", dev->name);
1394         }
1395         scc_writel(state, dpriv, dev, CCR0);
1396         ret = 0;
1397 done:
1398         return ret;
1399 }
1400
1401 static int dscc4_encoding_setting(struct dscc4_dev_priv *dpriv,
1402                                   struct net_device *dev)
1403 {
1404         struct thingie encoding[] = {
1405                 { ENCODING_NRZ,         0x00000000 },
1406                 { ENCODING_NRZI,        0x00200000 },
1407                 { ENCODING_FM_MARK,     0x00400000 },
1408                 { ENCODING_FM_SPACE,    0x00500000 },
1409                 { ENCODING_MANCHESTER,  0x00600000 },
1410                 { -1,                   0}
1411         };
1412         int i, ret = 0;
1413
1414         i = dscc4_match(encoding, dpriv->encoding);
1415         if (i >= 0)
1416                 scc_patchl(EncodingMask, encoding[i].bits, dpriv, dev, CCR0);
1417         else
1418                 ret = -EOPNOTSUPP;
1419         return ret;
1420 }
1421
1422 static int dscc4_loopback_setting(struct dscc4_dev_priv *dpriv,
1423                                   struct net_device *dev)
1424 {
1425         sync_serial_settings *settings = &dpriv->settings;
1426         u32 state;
1427
1428         state = scc_readl(dpriv, CCR1);
1429         if (settings->loopback) {
1430                 printk(KERN_DEBUG "%s: loopback\n", dev->name);
1431                 state |= 0x00000100;
1432         } else {
1433                 printk(KERN_DEBUG "%s: normal\n", dev->name);
1434                 state &= ~0x00000100;
1435         }
1436         scc_writel(state, dpriv, dev, CCR1);
1437         return 0;
1438 }
1439
1440 static int dscc4_crc_setting(struct dscc4_dev_priv *dpriv,
1441                              struct net_device *dev)
1442 {
1443         struct thingie crc[] = {
1444                 { PARITY_CRC16_PR0_CCITT,       0x00000010 },
1445                 { PARITY_CRC16_PR1_CCITT,       0x00000000 },
1446                 { PARITY_CRC32_PR0_CCITT,       0x00000011 },
1447                 { PARITY_CRC32_PR1_CCITT,       0x00000001 }
1448         };
1449         int i, ret = 0;
1450
1451         i = dscc4_match(crc, dpriv->parity);
1452         if (i >= 0)
1453                 scc_patchl(CrcMask, crc[i].bits, dpriv, dev, CCR1);
1454         else
1455                 ret = -EOPNOTSUPP;
1456         return ret;
1457 }
1458
1459 static int dscc4_set_iface(struct dscc4_dev_priv *dpriv, struct net_device *dev)
1460 {
1461         struct {
1462                 int (*action)(struct dscc4_dev_priv *, struct net_device *);
1463         } *p, do_setting[] = {
1464                 { dscc4_encoding_setting },
1465                 { dscc4_clock_setting },
1466                 { dscc4_loopback_setting },
1467                 { dscc4_crc_setting },
1468                 { NULL }
1469         };
1470         int ret = 0;
1471
1472         for (p = do_setting; p->action; p++) {
1473                 if ((ret = p->action(dpriv, dev)) < 0)
1474                         break;
1475         }
1476         return ret;
1477 }
1478
1479 static irqreturn_t dscc4_irq(int irq, void *token)
1480 {
1481         struct dscc4_dev_priv *root = token;
1482         struct dscc4_pci_priv *priv;
1483         struct net_device *dev;
1484         void __iomem *ioaddr;
1485         u32 state;
1486         unsigned long flags;
1487         int i, handled = 1;
1488
1489         priv = root->pci_priv;
1490         dev = dscc4_to_dev(root);
1491
1492         spin_lock_irqsave(&priv->lock, flags);
1493
1494         ioaddr = root->base_addr;
1495
1496         state = readl(ioaddr + GSTAR);
1497         if (!state) {
1498                 handled = 0;
1499                 goto out;
1500         }
1501         if (debug > 3)
1502                 printk(KERN_DEBUG "%s: GSTAR = 0x%08x\n", DRV_NAME, state);
1503         writel(state, ioaddr + GSTAR);
1504
1505         if (state & Arf) {
1506                 printk(KERN_ERR "%s: failure (Arf). Harass the maintener\n",
1507                        dev->name);
1508                 goto out;
1509         }
1510         state &= ~ArAck;
1511         if (state & Cfg) {
1512                 if (debug > 0)
1513                         printk(KERN_DEBUG "%s: CfgIV\n", DRV_NAME);
1514                 if (priv->iqcfg[priv->cfg_cur++%IRQ_RING_SIZE] & cpu_to_le32(Arf))
1515                         printk(KERN_ERR "%s: %s failed\n", dev->name, "CFG");
1516                 if (!(state &= ~Cfg))
1517                         goto out;
1518         }
1519         if (state & RxEvt) {
1520                 i = dev_per_card - 1;
1521                 do {
1522                         dscc4_rx_irq(priv, root + i);
1523                 } while (--i >= 0);
1524                 state &= ~RxEvt;
1525         }
1526         if (state & TxEvt) {
1527                 i = dev_per_card - 1;
1528                 do {
1529                         dscc4_tx_irq(priv, root + i);
1530                 } while (--i >= 0);
1531                 state &= ~TxEvt;
1532         }
1533 out:
1534         spin_unlock_irqrestore(&priv->lock, flags);
1535         return IRQ_RETVAL(handled);
1536 }
1537
1538 static void dscc4_tx_irq(struct dscc4_pci_priv *ppriv,
1539                                 struct dscc4_dev_priv *dpriv)
1540 {
1541         struct net_device *dev = dscc4_to_dev(dpriv);
1542         u32 state;
1543         int cur, loop = 0;
1544
1545 try:
1546         cur = dpriv->iqtx_current%IRQ_RING_SIZE;
1547         state = le32_to_cpu(dpriv->iqtx[cur]);
1548         if (!state) {
1549                 if (debug > 4)
1550                         printk(KERN_DEBUG "%s: Tx ISR = 0x%08x\n", dev->name,
1551                                state);
1552                 if ((debug > 1) && (loop > 1))
1553                         printk(KERN_DEBUG "%s: Tx irq loop=%d\n", dev->name, loop);
1554                 if (loop && netif_queue_stopped(dev))
1555                         if ((dpriv->tx_current - dpriv->tx_dirty)%TX_RING_SIZE)
1556                                 netif_wake_queue(dev);
1557
1558                 if (netif_running(dev) && dscc4_tx_quiescent(dpriv, dev) &&
1559                     !dscc4_tx_done(dpriv))
1560                                 dscc4_do_tx(dpriv, dev);
1561                 return;
1562         }
1563         loop++;
1564         dpriv->iqtx[cur] = 0;
1565         dpriv->iqtx_current++;
1566
1567         if (state_check(state, dpriv, dev, "Tx") < 0)
1568                 return;
1569
1570         if (state & SccEvt) {
1571                 if (state & Alls) {
1572                         struct sk_buff *skb;
1573                         struct TxFD *tx_fd;
1574
1575                         if (debug > 2)
1576                                 dscc4_tx_print(dev, dpriv, "Alls");
1577                         /*
1578                          * DataComplete can't be trusted for Tx completion.
1579                          * Cf errata DS5 p.8
1580                          */
1581                         cur = dpriv->tx_dirty%TX_RING_SIZE;
1582                         tx_fd = dpriv->tx_fd + cur;
1583                         skb = dpriv->tx_skbuff[cur];
1584                         if (skb) {
1585                                 pci_unmap_single(ppriv->pdev, le32_to_cpu(tx_fd->data),
1586                                                  skb->len, PCI_DMA_TODEVICE);
1587                                 if (tx_fd->state & FrameEnd) {
1588                                         dev->stats.tx_packets++;
1589                                         dev->stats.tx_bytes += skb->len;
1590                                 }
1591                                 dev_kfree_skb_irq(skb);
1592                                 dpriv->tx_skbuff[cur] = NULL;
1593                                 ++dpriv->tx_dirty;
1594                         } else {
1595                                 if (debug > 1)
1596                                         printk(KERN_ERR "%s Tx: NULL skb %d\n",
1597                                                 dev->name, cur);
1598                         }
1599                         /*
1600                          * If the driver ends sending crap on the wire, it
1601                          * will be way easier to diagnose than the (not so)
1602                          * random freeze induced by null sized tx frames.
1603                          */
1604                         tx_fd->data = tx_fd->next;
1605                         tx_fd->state = FrameEnd | TO_STATE_TX(2*DUMMY_SKB_SIZE);
1606                         tx_fd->complete = 0x00000000;
1607                         tx_fd->jiffies = 0;
1608
1609                         if (!(state &= ~Alls))
1610                                 goto try;
1611                 }
1612                 /*
1613                  * Transmit Data Underrun
1614                  */
1615                 if (state & Xdu) {
1616                         printk(KERN_ERR "%s: XDU. Ask maintainer\n", DRV_NAME);
1617                         dpriv->flags = NeedIDT;
1618                         /* Tx reset */
1619                         writel(MTFi | Rdt,
1620                                dpriv->base_addr + 0x0c*dpriv->dev_id + CH0CFG);
1621                         writel(Action, dpriv->base_addr + GCMDR);
1622                         return;
1623                 }
1624                 if (state & Cts) {
1625                         printk(KERN_INFO "%s: CTS transition\n", dev->name);
1626                         if (!(state &= ~Cts)) /* DEBUG */
1627                                 goto try;
1628                 }
1629                 if (state & Xmr) {
1630                         /* Frame needs to be sent again - FIXME */
1631                         printk(KERN_ERR "%s: Xmr. Ask maintainer\n", DRV_NAME);
1632                         if (!(state &= ~Xmr)) /* DEBUG */
1633                                 goto try;
1634                 }
1635                 if (state & Xpr) {
1636                         void __iomem *scc_addr;
1637                         unsigned long ring;
1638                         int i;
1639
1640                         /*
1641                          * - the busy condition happens (sometimes);
1642                          * - it doesn't seem to make the handler unreliable.
1643                          */
1644                         for (i = 1; i; i <<= 1) {
1645                                 if (!(scc_readl_star(dpriv, dev) & SccBusy))
1646                                         break;
1647                         }
1648                         if (!i)
1649                                 printk(KERN_INFO "%s busy in irq\n", dev->name);
1650
1651                         scc_addr = dpriv->base_addr + 0x0c*dpriv->dev_id;
1652                         /* Keep this order: IDT before IDR */
1653                         if (dpriv->flags & NeedIDT) {
1654                                 if (debug > 2)
1655                                         dscc4_tx_print(dev, dpriv, "Xpr");
1656                                 ring = dpriv->tx_fd_dma +
1657                                        (dpriv->tx_dirty%TX_RING_SIZE)*
1658                                        sizeof(struct TxFD);
1659                                 writel(ring, scc_addr + CH0BTDA);
1660                                 dscc4_do_tx(dpriv, dev);
1661                                 writel(MTFi | Idt, scc_addr + CH0CFG);
1662                                 if (dscc4_do_action(dev, "IDT") < 0)
1663                                         goto err_xpr;
1664                                 dpriv->flags &= ~NeedIDT;
1665                         }
1666                         if (dpriv->flags & NeedIDR) {
1667                                 ring = dpriv->rx_fd_dma +
1668                                        (dpriv->rx_current%RX_RING_SIZE)*
1669                                        sizeof(struct RxFD);
1670                                 writel(ring, scc_addr + CH0BRDA);
1671                                 dscc4_rx_update(dpriv, dev);
1672                                 writel(MTFi | Idr, scc_addr + CH0CFG);
1673                                 if (dscc4_do_action(dev, "IDR") < 0)
1674                                         goto err_xpr;
1675                                 dpriv->flags &= ~NeedIDR;
1676                                 smp_wmb();
1677                                 /* Activate receiver and misc */
1678                                 scc_writel(0x08050008, dpriv, dev, CCR2);
1679                         }
1680                 err_xpr:
1681                         if (!(state &= ~Xpr))
1682                                 goto try;
1683                 }
1684                 if (state & Cd) {
1685                         if (debug > 0)
1686                                 printk(KERN_INFO "%s: CD transition\n", dev->name);
1687                         if (!(state &= ~Cd)) /* DEBUG */
1688                                 goto try;
1689                 }
1690         } else { /* ! SccEvt */
1691                 if (state & Hi) {
1692 #ifdef DSCC4_POLLING
1693                         while (!dscc4_tx_poll(dpriv, dev));
1694 #endif
1695                         printk(KERN_INFO "%s: Tx Hi\n", dev->name);
1696                         state &= ~Hi;
1697                 }
1698                 if (state & Err) {
1699                         printk(KERN_INFO "%s: Tx ERR\n", dev->name);
1700                         dev->stats.tx_errors++;
1701                         state &= ~Err;
1702                 }
1703         }
1704         goto try;
1705 }
1706
1707 static void dscc4_rx_irq(struct dscc4_pci_priv *priv,
1708                                     struct dscc4_dev_priv *dpriv)
1709 {
1710         struct net_device *dev = dscc4_to_dev(dpriv);
1711         u32 state;
1712         int cur;
1713
1714 try:
1715         cur = dpriv->iqrx_current%IRQ_RING_SIZE;
1716         state = le32_to_cpu(dpriv->iqrx[cur]);
1717         if (!state)
1718                 return;
1719         dpriv->iqrx[cur] = 0;
1720         dpriv->iqrx_current++;
1721
1722         if (state_check(state, dpriv, dev, "Rx") < 0)
1723                 return;
1724
1725         if (!(state & SccEvt)){
1726                 struct RxFD *rx_fd;
1727
1728                 if (debug > 4)
1729                         printk(KERN_DEBUG "%s: Rx ISR = 0x%08x\n", dev->name,
1730                                state);
1731                 state &= 0x00ffffff;
1732                 if (state & Err) { /* Hold or reset */
1733                         printk(KERN_DEBUG "%s: Rx ERR\n", dev->name);
1734                         cur = dpriv->rx_current%RX_RING_SIZE;
1735                         rx_fd = dpriv->rx_fd + cur;
1736                         /*
1737                          * Presume we're not facing a DMAC receiver reset.
1738                          * As We use the rx size-filtering feature of the
1739                          * DSCC4, the beginning of a new frame is waiting in
1740                          * the rx fifo. I bet a Receive Data Overflow will
1741                          * happen most of time but let's try and avoid it.
1742                          * Btw (as for RDO) if one experiences ERR whereas
1743                          * the system looks rather idle, there may be a
1744                          * problem with latency. In this case, increasing
1745                          * RX_RING_SIZE may help.
1746                          */
1747                         //while (dpriv->rx_needs_refill) {
1748                                 while (!(rx_fd->state1 & Hold)) {
1749                                         rx_fd++;
1750                                         cur++;
1751                                         if (!(cur = cur%RX_RING_SIZE))
1752                                                 rx_fd = dpriv->rx_fd;
1753                                 }
1754                                 //dpriv->rx_needs_refill--;
1755                                 try_get_rx_skb(dpriv, dev);
1756                                 if (!rx_fd->data)
1757                                         goto try;
1758                                 rx_fd->state1 &= ~Hold;
1759                                 rx_fd->state2 = 0x00000000;
1760                                 rx_fd->end = cpu_to_le32(0xbabeface);
1761                         //}
1762                         goto try;
1763                 }
1764                 if (state & Fi) {
1765                         dscc4_rx_skb(dpriv, dev);
1766                         goto try;
1767                 }
1768                 if (state & Hi ) { /* HI bit */
1769                         printk(KERN_INFO "%s: Rx Hi\n", dev->name);
1770                         state &= ~Hi;
1771                         goto try;
1772                 }
1773         } else { /* SccEvt */
1774                 if (debug > 1) {
1775                         //FIXME: verifier la presence de tous les evenements
1776                 static struct {
1777                         u32 mask;
1778                         const char *irq_name;
1779                 } evts[] = {
1780                         { 0x00008000, "TIN"},
1781                         { 0x00000020, "RSC"},
1782                         { 0x00000010, "PCE"},
1783                         { 0x00000008, "PLLA"},
1784                         { 0, NULL}
1785                 }, *evt;
1786
1787                 for (evt = evts; evt->irq_name; evt++) {
1788                         if (state & evt->mask) {
1789                                         printk(KERN_DEBUG "%s: %s\n",
1790                                                 dev->name, evt->irq_name);
1791                                 if (!(state &= ~evt->mask))
1792                                         goto try;
1793                         }
1794                 }
1795                 } else {
1796                         if (!(state &= ~0x0000c03c))
1797                                 goto try;
1798                 }
1799                 if (state & Cts) {
1800                         printk(KERN_INFO "%s: CTS transition\n", dev->name);
1801                         if (!(state &= ~Cts)) /* DEBUG */
1802                                 goto try;
1803                 }
1804                 /*
1805                  * Receive Data Overflow (FIXME: fscked)
1806                  */
1807                 if (state & Rdo) {
1808                         struct RxFD *rx_fd;
1809                         void __iomem *scc_addr;
1810                         int cur;
1811
1812                         //if (debug)
1813                         //      dscc4_rx_dump(dpriv);
1814                         scc_addr = dpriv->base_addr + 0x0c*dpriv->dev_id;
1815
1816                         scc_patchl(RxActivate, 0, dpriv, dev, CCR2);
1817                         /*
1818                          * This has no effect. Why ?
1819                          * ORed with TxSccRes, one sees the CFG ack (for
1820                          * the TX part only).
1821                          */
1822                         scc_writel(RxSccRes, dpriv, dev, CMDR);
1823                         dpriv->flags |= RdoSet;
1824
1825                         /*
1826                          * Let's try and save something in the received data.
1827                          * rx_current must be incremented at least once to
1828                          * avoid HOLD in the BRDA-to-be-pointed desc.
1829                          */
1830                         do {
1831                                 cur = dpriv->rx_current++%RX_RING_SIZE;
1832                                 rx_fd = dpriv->rx_fd + cur;
1833                                 if (!(rx_fd->state2 & DataComplete))
1834                                         break;
1835                                 if (rx_fd->state2 & FrameAborted) {
1836                                         dev->stats.rx_over_errors++;
1837                                         rx_fd->state1 |= Hold;
1838                                         rx_fd->state2 = 0x00000000;
1839                                         rx_fd->end = cpu_to_le32(0xbabeface);
1840                                 } else
1841                                         dscc4_rx_skb(dpriv, dev);
1842                         } while (1);
1843
1844                         if (debug > 0) {
1845                                 if (dpriv->flags & RdoSet)
1846                                         printk(KERN_DEBUG
1847                                                "%s: no RDO in Rx data\n", DRV_NAME);
1848                         }
1849 #ifdef DSCC4_RDO_EXPERIMENTAL_RECOVERY
1850                         /*
1851                          * FIXME: must the reset be this violent ?
1852                          */
1853 #warning "FIXME: CH0BRDA"
1854                         writel(dpriv->rx_fd_dma +
1855                                (dpriv->rx_current%RX_RING_SIZE)*
1856                                sizeof(struct RxFD), scc_addr + CH0BRDA);
1857                         writel(MTFi|Rdr|Idr, scc_addr + CH0CFG);
1858                         if (dscc4_do_action(dev, "RDR") < 0) {
1859                                 printk(KERN_ERR "%s: RDO recovery failed(%s)\n",
1860                                        dev->name, "RDR");
1861                                 goto rdo_end;
1862                         }
1863                         writel(MTFi|Idr, scc_addr + CH0CFG);
1864                         if (dscc4_do_action(dev, "IDR") < 0) {
1865                                 printk(KERN_ERR "%s: RDO recovery failed(%s)\n",
1866                                        dev->name, "IDR");
1867                                 goto rdo_end;
1868                         }
1869                 rdo_end:
1870 #endif
1871                         scc_patchl(0, RxActivate, dpriv, dev, CCR2);
1872                         goto try;
1873                 }
1874                 if (state & Cd) {
1875                         printk(KERN_INFO "%s: CD transition\n", dev->name);
1876                         if (!(state &= ~Cd)) /* DEBUG */
1877                                 goto try;
1878                 }
1879                 if (state & Flex) {
1880                         printk(KERN_DEBUG "%s: Flex. Ttttt...\n", DRV_NAME);
1881                         if (!(state &= ~Flex))
1882                                 goto try;
1883                 }
1884         }
1885 }
1886
1887 /*
1888  * I had expected the following to work for the first descriptor
1889  * (tx_fd->state = 0xc0000000)
1890  * - Hold=1 (don't try and branch to the next descripto);
1891  * - No=0 (I want an empty data section, i.e. size=0);
1892  * - Fe=1 (required by No=0 or we got an Err irq and must reset).
1893  * It failed and locked solid. Thus the introduction of a dummy skb.
1894  * Problem is acknowledged in errata sheet DS5. Joy :o/
1895  */
1896 static struct sk_buff *dscc4_init_dummy_skb(struct dscc4_dev_priv *dpriv)
1897 {
1898         struct sk_buff *skb;
1899
1900         skb = dev_alloc_skb(DUMMY_SKB_SIZE);
1901         if (skb) {
1902                 int last = dpriv->tx_dirty%TX_RING_SIZE;
1903                 struct TxFD *tx_fd = dpriv->tx_fd + last;
1904
1905                 skb->len = DUMMY_SKB_SIZE;
1906                 skb_copy_to_linear_data(skb, version,
1907                                         strlen(version) % DUMMY_SKB_SIZE);
1908                 tx_fd->state = FrameEnd | TO_STATE_TX(DUMMY_SKB_SIZE);
1909                 tx_fd->data = cpu_to_le32(pci_map_single(dpriv->pci_priv->pdev,
1910                                              skb->data, DUMMY_SKB_SIZE,
1911                                              PCI_DMA_TODEVICE));
1912                 dpriv->tx_skbuff[last] = skb;
1913         }
1914         return skb;
1915 }
1916
1917 static int dscc4_init_ring(struct net_device *dev)
1918 {
1919         struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
1920         struct pci_dev *pdev = dpriv->pci_priv->pdev;
1921         struct TxFD *tx_fd;
1922         struct RxFD *rx_fd;
1923         void *ring;
1924         int i;
1925
1926         ring = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &dpriv->rx_fd_dma);
1927         if (!ring)
1928                 goto err_out;
1929         dpriv->rx_fd = rx_fd = (struct RxFD *) ring;
1930
1931         ring = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &dpriv->tx_fd_dma);
1932         if (!ring)
1933                 goto err_free_dma_rx;
1934         dpriv->tx_fd = tx_fd = (struct TxFD *) ring;
1935
1936         memset(dpriv->tx_skbuff, 0, sizeof(struct sk_buff *)*TX_RING_SIZE);
1937         dpriv->tx_dirty = 0xffffffff;
1938         i = dpriv->tx_current = 0;
1939         do {
1940                 tx_fd->state = FrameEnd | TO_STATE_TX(2*DUMMY_SKB_SIZE);
1941                 tx_fd->complete = 0x00000000;
1942                 /* FIXME: NULL should be ok - to be tried */
1943                 tx_fd->data = cpu_to_le32(dpriv->tx_fd_dma);
1944                 (tx_fd++)->next = cpu_to_le32(dpriv->tx_fd_dma +
1945                                         (++i%TX_RING_SIZE)*sizeof(*tx_fd));
1946         } while (i < TX_RING_SIZE);
1947
1948         if (!dscc4_init_dummy_skb(dpriv))
1949                 goto err_free_dma_tx;
1950
1951         memset(dpriv->rx_skbuff, 0, sizeof(struct sk_buff *)*RX_RING_SIZE);
1952         i = dpriv->rx_dirty = dpriv->rx_current = 0;
1953         do {
1954                 /* size set by the host. Multiple of 4 bytes please */
1955                 rx_fd->state1 = HiDesc;
1956                 rx_fd->state2 = 0x00000000;
1957                 rx_fd->end = cpu_to_le32(0xbabeface);
1958                 rx_fd->state1 |= TO_STATE_RX(HDLC_MAX_MRU);
1959                 // FIXME: return value verifiee mais traitement suspect
1960                 if (try_get_rx_skb(dpriv, dev) >= 0)
1961                         dpriv->rx_dirty++;
1962                 (rx_fd++)->next = cpu_to_le32(dpriv->rx_fd_dma +
1963                                         (++i%RX_RING_SIZE)*sizeof(*rx_fd));
1964         } while (i < RX_RING_SIZE);
1965
1966         return 0;
1967
1968 err_free_dma_tx:
1969         pci_free_consistent(pdev, TX_TOTAL_SIZE, ring, dpriv->tx_fd_dma);
1970 err_free_dma_rx:
1971         pci_free_consistent(pdev, RX_TOTAL_SIZE, rx_fd, dpriv->rx_fd_dma);
1972 err_out:
1973         return -ENOMEM;
1974 }
1975
1976 static void __devexit dscc4_remove_one(struct pci_dev *pdev)
1977 {
1978         struct dscc4_pci_priv *ppriv;
1979         struct dscc4_dev_priv *root;
1980         void __iomem *ioaddr;
1981         int i;
1982
1983         ppriv = pci_get_drvdata(pdev);
1984         root = ppriv->root;
1985
1986         ioaddr = root->base_addr;
1987
1988         dscc4_pci_reset(pdev, ioaddr);
1989
1990         free_irq(pdev->irq, root);
1991         pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32), ppriv->iqcfg,
1992                             ppriv->iqcfg_dma);
1993         for (i = 0; i < dev_per_card; i++) {
1994                 struct dscc4_dev_priv *dpriv = root + i;
1995
1996                 dscc4_release_ring(dpriv);
1997                 pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32),
1998                                     dpriv->iqrx, dpriv->iqrx_dma);
1999                 pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32),
2000                                     dpriv->iqtx, dpriv->iqtx_dma);
2001         }
2002
2003         dscc4_free1(pdev);
2004
2005         iounmap(ioaddr);
2006
2007         pci_release_region(pdev, 1);
2008         pci_release_region(pdev, 0);
2009
2010         pci_disable_device(pdev);
2011 }
2012
2013 static int dscc4_hdlc_attach(struct net_device *dev, unsigned short encoding,
2014         unsigned short parity)
2015 {
2016         struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
2017
2018         if (encoding != ENCODING_NRZ &&
2019             encoding != ENCODING_NRZI &&
2020             encoding != ENCODING_FM_MARK &&
2021             encoding != ENCODING_FM_SPACE &&
2022             encoding != ENCODING_MANCHESTER)
2023                 return -EINVAL;
2024
2025         if (parity != PARITY_NONE &&
2026             parity != PARITY_CRC16_PR0_CCITT &&
2027             parity != PARITY_CRC16_PR1_CCITT &&
2028             parity != PARITY_CRC32_PR0_CCITT &&
2029             parity != PARITY_CRC32_PR1_CCITT)
2030                 return -EINVAL;
2031
2032         dpriv->encoding = encoding;
2033         dpriv->parity = parity;
2034         return 0;
2035 }
2036
2037 #ifndef MODULE
2038 static int __init dscc4_setup(char *str)
2039 {
2040         int *args[] = { &debug, &quartz, NULL }, **p = args;
2041
2042         while (*p && (get_option(&str, *p) == 2))
2043                 p++;
2044         return 1;
2045 }
2046
2047 __setup("dscc4.setup=", dscc4_setup);
2048 #endif
2049
2050 static struct pci_device_id dscc4_pci_tbl[] = {
2051         { PCI_VENDOR_ID_SIEMENS, PCI_DEVICE_ID_SIEMENS_DSCC4,
2052                 PCI_ANY_ID, PCI_ANY_ID, },
2053         { 0,}
2054 };
2055 MODULE_DEVICE_TABLE(pci, dscc4_pci_tbl);
2056
2057 static struct pci_driver dscc4_driver = {
2058         .name           = DRV_NAME,
2059         .id_table       = dscc4_pci_tbl,
2060         .probe          = dscc4_init_one,
2061         .remove         = __devexit_p(dscc4_remove_one),
2062 };
2063
2064 static int __init dscc4_init_module(void)
2065 {
2066         return pci_register_driver(&dscc4_driver);
2067 }
2068
2069 static void __exit dscc4_cleanup_module(void)
2070 {
2071         pci_unregister_driver(&dscc4_driver);
2072 }
2073
2074 module_init(dscc4_init_module);
2075 module_exit(dscc4_cleanup_module);