2 * Apple Onboard Audio driver -- layout/machine id fabric
4 * Copyright 2006-2008 Johannes Berg <johannes@sipsolutions.net>
6 * GPL v2, can be found in COPYING.
9 * This fabric module looks for sound codecs based on the
10 * layout-id or device-id property in the device tree.
13 #include <linux/list.h>
14 #include <linux/module.h>
16 #include "../soundbus/soundbus.h"
18 MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
19 MODULE_LICENSE("GPL");
20 MODULE_DESCRIPTION("Layout-ID fabric for snd-aoa");
22 #define MAX_CODECS_PER_BUS 2
24 /* These are the connections the layout fabric
25 * knows about. It doesn't really care about the
26 * input ones, but I thought I'd separate them
27 * to give them proper names. The thing is that
28 * Apple usually will distinguish the active output
29 * by GPIOs, while the active input is set directly
30 * on the codec. Hence we here tell the codec what
31 * we think is connected. This information is hard-
33 #define CC_SPEAKERS (1<<0)
34 #define CC_HEADPHONE (1<<1)
35 #define CC_LINEOUT (1<<2)
36 #define CC_DIGITALOUT (1<<3)
37 #define CC_LINEIN (1<<4)
38 #define CC_MICROPHONE (1<<5)
39 #define CC_DIGITALIN (1<<6)
40 /* pretty bogus but users complain...
41 * This is a flag saying that the LINEOUT
42 * should be renamed to HEADPHONE.
43 * be careful with input detection! */
44 #define CC_LINEOUT_LABELLED_HEADPHONE (1<<7)
46 struct codec_connection {
47 /* CC_ flags from above */
49 /* codec dependent bit to be set in the aoa_codec.connected field.
50 * This intentionally doesn't have any generic flags because the
51 * fabric has to know the codec anyway and all codecs might have
52 * different connectors */
56 struct codec_connect_info {
58 struct codec_connection *connections;
61 #define LAYOUT_FLAG_COMBO_LINEOUT_SPDIF (1<<0)
64 unsigned int layout_id, device_id;
65 struct codec_connect_info codecs[MAX_CODECS_PER_BUS];
68 /* if busname is not assigned, we use 'Master' below,
69 * so that our layout table doesn't need to be filled
71 * We only assign these two if we expect to find more
72 * than one soundbus, i.e. on those machines with
73 * multiple layout-ids */
78 MODULE_ALIAS("sound-layout-36");
79 MODULE_ALIAS("sound-layout-41");
80 MODULE_ALIAS("sound-layout-45");
81 MODULE_ALIAS("sound-layout-47");
82 MODULE_ALIAS("sound-layout-48");
83 MODULE_ALIAS("sound-layout-49");
84 MODULE_ALIAS("sound-layout-50");
85 MODULE_ALIAS("sound-layout-51");
86 MODULE_ALIAS("sound-layout-56");
87 MODULE_ALIAS("sound-layout-57");
88 MODULE_ALIAS("sound-layout-58");
89 MODULE_ALIAS("sound-layout-60");
90 MODULE_ALIAS("sound-layout-61");
91 MODULE_ALIAS("sound-layout-62");
92 MODULE_ALIAS("sound-layout-64");
93 MODULE_ALIAS("sound-layout-65");
94 MODULE_ALIAS("sound-layout-66");
95 MODULE_ALIAS("sound-layout-67");
96 MODULE_ALIAS("sound-layout-68");
97 MODULE_ALIAS("sound-layout-69");
98 MODULE_ALIAS("sound-layout-70");
99 MODULE_ALIAS("sound-layout-72");
100 MODULE_ALIAS("sound-layout-76");
101 MODULE_ALIAS("sound-layout-80");
102 MODULE_ALIAS("sound-layout-82");
103 MODULE_ALIAS("sound-layout-84");
104 MODULE_ALIAS("sound-layout-86");
105 MODULE_ALIAS("sound-layout-90");
106 MODULE_ALIAS("sound-layout-92");
107 MODULE_ALIAS("sound-layout-94");
108 MODULE_ALIAS("sound-layout-96");
109 MODULE_ALIAS("sound-layout-98");
110 MODULE_ALIAS("sound-layout-100");
112 MODULE_ALIAS("aoa-device-id-14");
113 MODULE_ALIAS("aoa-device-id-22");
114 MODULE_ALIAS("aoa-device-id-35");
116 /* onyx with all but microphone connected */
117 static struct codec_connection onyx_connections_nomic[] = {
119 .connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT,
123 .connected = CC_DIGITALOUT,
127 .connected = CC_LINEIN,
130 {} /* terminate array by .connected == 0 */
133 /* onyx on machines without headphone */
134 static struct codec_connection onyx_connections_noheadphones[] = {
136 .connected = CC_SPEAKERS | CC_LINEOUT |
137 CC_LINEOUT_LABELLED_HEADPHONE,
141 .connected = CC_DIGITALOUT,
144 /* FIXME: are these correct? probably not for all the machines
145 * below ... If not this will need separating. */
147 .connected = CC_LINEIN,
151 .connected = CC_MICROPHONE,
154 {} /* terminate array by .connected == 0 */
157 /* onyx on machines with real line-out */
158 static struct codec_connection onyx_connections_reallineout[] = {
160 .connected = CC_SPEAKERS | CC_LINEOUT | CC_HEADPHONE,
164 .connected = CC_DIGITALOUT,
168 .connected = CC_LINEIN,
171 {} /* terminate array by .connected == 0 */
174 /* tas on machines without line out */
175 static struct codec_connection tas_connections_nolineout[] = {
177 .connected = CC_SPEAKERS | CC_HEADPHONE,
181 .connected = CC_LINEIN,
185 .connected = CC_MICROPHONE,
188 {} /* terminate array by .connected == 0 */
191 /* tas on machines with neither line out nor line in */
192 static struct codec_connection tas_connections_noline[] = {
194 .connected = CC_SPEAKERS | CC_HEADPHONE,
198 .connected = CC_MICROPHONE,
201 {} /* terminate array by .connected == 0 */
204 /* tas on machines without microphone */
205 static struct codec_connection tas_connections_nomic[] = {
207 .connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT,
211 .connected = CC_LINEIN,
214 {} /* terminate array by .connected == 0 */
217 /* tas on machines with everything connected */
218 static struct codec_connection tas_connections_all[] = {
220 .connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT,
224 .connected = CC_LINEIN,
228 .connected = CC_MICROPHONE,
231 {} /* terminate array by .connected == 0 */
234 static struct codec_connection toonie_connections[] = {
236 .connected = CC_SPEAKERS | CC_HEADPHONE,
239 {} /* terminate array by .connected == 0 */
242 static struct codec_connection topaz_input[] = {
244 .connected = CC_DIGITALIN,
247 {} /* terminate array by .connected == 0 */
250 static struct codec_connection topaz_output[] = {
252 .connected = CC_DIGITALOUT,
255 {} /* terminate array by .connected == 0 */
258 static struct codec_connection topaz_inout[] = {
260 .connected = CC_DIGITALIN,
264 .connected = CC_DIGITALOUT,
267 {} /* terminate array by .connected == 0 */
270 static struct layout layouts[] = {
271 /* last PowerBooks (15" Oct 2005) */
273 .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF,
276 .connections = onyx_connections_noheadphones,
280 .connections = topaz_input,
287 .connections = onyx_connections_reallineout,
294 .connections = topaz_input,
299 .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF,
302 .connections = onyx_connections_noheadphones,
309 .connections = topaz_input,
312 /* PowerBook5,9 [17" Oct 2005] */
314 .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF,
317 .connections = onyx_connections_noheadphones,
321 .connections = topaz_input,
328 .connections = onyx_connections_noheadphones,
332 .connections = topaz_input,
335 /* Quad PowerMac (analog in, analog/digital out) */
339 .connections = onyx_connections_nomic,
342 /* Quad PowerMac (digital in) */
346 .connections = topaz_input,
348 .busname = "digital in", .pcmid = 1 },
349 /* Early 2005 PowerBook (PowerBook 5,6) */
353 .connections = tas_connections_nolineout,
360 .connections = tas_connections_nolineout,
367 .connections = tas_connections_noline,
374 .connections = tas_connections_nolineout,
381 .connections = onyx_connections_nomic,
385 .connections = topaz_input,
392 .connections = tas_connections_nolineout,
395 /* PowerMac10,1 (Mac Mini) */
399 .connections = toonie_connections,
406 .connections = onyx_connections_noheadphones,
409 /* unknown, untested, but this comes from Apple */
413 .connections = tas_connections_all,
419 .connections = tas_connections_nomic,
423 .connections = topaz_inout,
429 .connections = onyx_connections_noheadphones,
435 .connections = topaz_input,
441 .connections = onyx_connections_nomic,
447 .connections = topaz_input,
453 .connections = onyx_connections_noheadphones,
459 .connections = topaz_input,
465 .connections = onyx_connections_noheadphones,
469 .connections = topaz_output,
475 .connections = onyx_connections_noheadphones,
481 .connections = topaz_input,
487 .connections = tas_connections_nomic,
491 .connections = topaz_inout,
497 .connections = tas_connections_noline,
503 /* but it has an external mic?? how to select? */
504 .connections = onyx_connections_noheadphones,
510 .connections = toonie_connections,
516 .connections = topaz_input,
520 .connections = onyx_connections_noheadphones,
527 .connections = tas_connections_noline,
534 .connections = tas_connections_all,
541 .connections = tas_connections_all,
547 static struct layout *find_layout_by_id(unsigned int id)
552 while (l->codecs[0].name) {
553 if (l->layout_id == id)
560 static struct layout *find_layout_by_device(unsigned int id)
565 while (l->codecs[0].name) {
566 if (l->device_id == id)
573 static void use_layout(struct layout *l)
577 for (i=0; i<MAX_CODECS_PER_BUS; i++) {
578 if (l->codecs[i].name) {
579 request_module("snd-aoa-codec-%s", l->codecs[i].name);
582 /* now we wait for the codecs to call us back */
587 struct layout_dev_ptr {
588 struct layout_dev *ptr;
592 struct list_head list;
593 struct soundbus_dev *sdev;
594 struct device_node *sound;
595 struct aoa_codec *codecs[MAX_CODECS_PER_BUS];
596 struct layout *layout;
597 struct gpio_runtime gpio;
599 /* we need these for headphone/lineout detection */
600 struct snd_kcontrol *headphone_ctrl;
601 struct snd_kcontrol *lineout_ctrl;
602 struct snd_kcontrol *speaker_ctrl;
603 struct snd_kcontrol *master_ctrl;
604 struct snd_kcontrol *headphone_detected_ctrl;
605 struct snd_kcontrol *lineout_detected_ctrl;
607 struct layout_dev_ptr selfptr_headphone;
608 struct layout_dev_ptr selfptr_lineout;
610 u32 have_lineout_detect:1,
611 have_headphone_detect:1,
612 switch_on_headphone:1,
616 static LIST_HEAD(layouts_list);
617 static int layouts_list_items;
618 /* this can go away but only if we allow multiple cards,
619 * make the fabric handle all the card stuff, etc... */
620 static struct layout_dev *layout_device;
622 #define control_info snd_ctl_boolean_mono_info
624 #define AMP_CONTROL(n, description) \
625 static int n##_control_get(struct snd_kcontrol *kcontrol, \
626 struct snd_ctl_elem_value *ucontrol) \
628 struct gpio_runtime *gpio = snd_kcontrol_chip(kcontrol); \
629 if (gpio->methods && gpio->methods->get_##n) \
630 ucontrol->value.integer.value[0] = \
631 gpio->methods->get_##n(gpio); \
634 static int n##_control_put(struct snd_kcontrol *kcontrol, \
635 struct snd_ctl_elem_value *ucontrol) \
637 struct gpio_runtime *gpio = snd_kcontrol_chip(kcontrol); \
638 if (gpio->methods && gpio->methods->get_##n) \
639 gpio->methods->set_##n(gpio, \
640 !!ucontrol->value.integer.value[0]); \
643 static struct snd_kcontrol_new n##_ctl = { \
644 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
645 .name = description, \
646 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \
647 .info = control_info, \
648 .get = n##_control_get, \
649 .put = n##_control_put, \
652 AMP_CONTROL(headphone, "Headphone Switch");
653 AMP_CONTROL(speakers, "Speakers Switch");
654 AMP_CONTROL(lineout, "Line-Out Switch");
655 AMP_CONTROL(master, "Master Switch");
657 static int detect_choice_get(struct snd_kcontrol *kcontrol,
658 struct snd_ctl_elem_value *ucontrol)
660 struct layout_dev *ldev = snd_kcontrol_chip(kcontrol);
662 switch (kcontrol->private_value) {
664 ucontrol->value.integer.value[0] = ldev->switch_on_headphone;
667 ucontrol->value.integer.value[0] = ldev->switch_on_lineout;
675 static int detect_choice_put(struct snd_kcontrol *kcontrol,
676 struct snd_ctl_elem_value *ucontrol)
678 struct layout_dev *ldev = snd_kcontrol_chip(kcontrol);
680 switch (kcontrol->private_value) {
682 ldev->switch_on_headphone = !!ucontrol->value.integer.value[0];
685 ldev->switch_on_lineout = !!ucontrol->value.integer.value[0];
693 static struct snd_kcontrol_new headphone_detect_choice = {
694 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
695 .name = "Headphone Detect Autoswitch",
696 .info = control_info,
697 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
698 .get = detect_choice_get,
699 .put = detect_choice_put,
703 static struct snd_kcontrol_new lineout_detect_choice = {
704 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
705 .name = "Line-Out Detect Autoswitch",
706 .info = control_info,
707 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
708 .get = detect_choice_get,
709 .put = detect_choice_put,
713 static int detected_get(struct snd_kcontrol *kcontrol,
714 struct snd_ctl_elem_value *ucontrol)
716 struct layout_dev *ldev = snd_kcontrol_chip(kcontrol);
719 switch (kcontrol->private_value) {
721 v = ldev->gpio.methods->get_detect(&ldev->gpio,
722 AOA_NOTIFY_HEADPHONE);
725 v = ldev->gpio.methods->get_detect(&ldev->gpio,
726 AOA_NOTIFY_LINE_OUT);
731 ucontrol->value.integer.value[0] = v;
735 static struct snd_kcontrol_new headphone_detected = {
736 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
737 .name = "Headphone Detected",
738 .info = control_info,
739 .access = SNDRV_CTL_ELEM_ACCESS_READ,
744 static struct snd_kcontrol_new lineout_detected = {
745 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
746 .name = "Line-Out Detected",
747 .info = control_info,
748 .access = SNDRV_CTL_ELEM_ACCESS_READ,
753 static int check_codec(struct aoa_codec *codec,
754 struct layout_dev *ldev,
755 struct codec_connect_info *cci)
759 struct codec_connection *cc;
761 /* if the codec has a 'codec' node, we require a reference */
762 if (codec->node && (strcmp(codec->node->name, "codec") == 0)) {
763 snprintf(propname, sizeof(propname),
764 "platform-%s-codec-ref", codec->name);
765 ref = of_get_property(ldev->sound, propname, NULL);
767 printk(KERN_INFO "snd-aoa-fabric-layout: "
768 "required property %s not present\n", propname);
771 if (*ref != codec->node->linux_phandle) {
772 printk(KERN_INFO "snd-aoa-fabric-layout: "
773 "%s doesn't match!\n", propname);
777 if (layouts_list_items != 1) {
778 printk(KERN_INFO "snd-aoa-fabric-layout: "
779 "more than one soundbus, but no references.\n");
783 codec->soundbus_dev = ldev->sdev;
784 codec->gpio = &ldev->gpio;
786 cc = cci->connections;
790 printk(KERN_INFO "snd-aoa-fabric-layout: can use this codec\n");
792 codec->connected = 0;
793 codec->fabric_data = cc;
795 while (cc->connected) {
796 codec->connected |= 1<<cc->codec_bit;
803 static int layout_found_codec(struct aoa_codec *codec)
805 struct layout_dev *ldev;
808 list_for_each_entry(ldev, &layouts_list, list) {
809 for (i=0; i<MAX_CODECS_PER_BUS; i++) {
810 if (!ldev->layout->codecs[i].name)
812 if (strcmp(ldev->layout->codecs[i].name, codec->name) == 0) {
813 if (check_codec(codec,
815 &ldev->layout->codecs[i]) == 0)
823 static void layout_remove_codec(struct aoa_codec *codec)
826 /* here remove the codec from the layout dev's
829 codec->soundbus_dev = NULL;
831 for (i=0; i<MAX_CODECS_PER_BUS; i++) {
835 static void layout_notify(void *data)
837 struct layout_dev_ptr *dptr = data;
838 struct layout_dev *ldev;
840 struct snd_kcontrol *detected, *c;
841 struct snd_card *card = aoa_get_card();
844 if (data == &ldev->selfptr_headphone) {
845 v = ldev->gpio.methods->get_detect(&ldev->gpio, AOA_NOTIFY_HEADPHONE);
846 detected = ldev->headphone_detected_ctrl;
847 update = ldev->switch_on_headphone;
849 ldev->gpio.methods->set_speakers(&ldev->gpio, !v);
850 ldev->gpio.methods->set_headphone(&ldev->gpio, v);
851 ldev->gpio.methods->set_lineout(&ldev->gpio, 0);
853 } else if (data == &ldev->selfptr_lineout) {
854 v = ldev->gpio.methods->get_detect(&ldev->gpio, AOA_NOTIFY_LINE_OUT);
855 detected = ldev->lineout_detected_ctrl;
856 update = ldev->switch_on_lineout;
858 ldev->gpio.methods->set_speakers(&ldev->gpio, !v);
859 ldev->gpio.methods->set_headphone(&ldev->gpio, 0);
860 ldev->gpio.methods->set_lineout(&ldev->gpio, v);
866 snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &detected->id);
868 c = ldev->headphone_ctrl;
870 snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id);
871 c = ldev->speaker_ctrl;
873 snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id);
874 c = ldev->lineout_ctrl;
876 snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id);
880 static void layout_attached_codec(struct aoa_codec *codec)
882 struct codec_connection *cc;
883 struct snd_kcontrol *ctl;
884 int headphones, lineout;
885 struct layout_dev *ldev = layout_device;
887 /* need to add this codec to our codec array! */
889 cc = codec->fabric_data;
891 headphones = codec->gpio->methods->get_detect(codec->gpio,
892 AOA_NOTIFY_HEADPHONE);
893 lineout = codec->gpio->methods->get_detect(codec->gpio,
894 AOA_NOTIFY_LINE_OUT);
896 if (codec->gpio->methods->set_master) {
897 ctl = snd_ctl_new1(&master_ctl, codec->gpio);
898 ldev->master_ctrl = ctl;
899 aoa_snd_ctl_add(ctl);
901 while (cc->connected) {
902 if (cc->connected & CC_SPEAKERS) {
903 if (headphones <= 0 && lineout <= 0)
904 ldev->gpio.methods->set_speakers(codec->gpio, 1);
905 ctl = snd_ctl_new1(&speakers_ctl, codec->gpio);
906 ldev->speaker_ctrl = ctl;
907 aoa_snd_ctl_add(ctl);
909 if (cc->connected & CC_HEADPHONE) {
911 ldev->gpio.methods->set_headphone(codec->gpio, 1);
912 ctl = snd_ctl_new1(&headphone_ctl, codec->gpio);
913 ldev->headphone_ctrl = ctl;
914 aoa_snd_ctl_add(ctl);
915 ldev->have_headphone_detect =
917 ->set_notify(&ldev->gpio,
918 AOA_NOTIFY_HEADPHONE,
920 &ldev->selfptr_headphone);
921 if (ldev->have_headphone_detect) {
922 ctl = snd_ctl_new1(&headphone_detect_choice,
924 aoa_snd_ctl_add(ctl);
925 ctl = snd_ctl_new1(&headphone_detected,
927 ldev->headphone_detected_ctrl = ctl;
928 aoa_snd_ctl_add(ctl);
931 if (cc->connected & CC_LINEOUT) {
933 ldev->gpio.methods->set_lineout(codec->gpio, 1);
934 ctl = snd_ctl_new1(&lineout_ctl, codec->gpio);
935 if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE)
936 strlcpy(ctl->id.name,
937 "Headphone Switch", sizeof(ctl->id.name));
938 ldev->lineout_ctrl = ctl;
939 aoa_snd_ctl_add(ctl);
940 ldev->have_lineout_detect =
942 ->set_notify(&ldev->gpio,
945 &ldev->selfptr_lineout);
946 if (ldev->have_lineout_detect) {
947 ctl = snd_ctl_new1(&lineout_detect_choice,
949 if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE)
950 strlcpy(ctl->id.name,
951 "Headphone Detect Autoswitch",
952 sizeof(ctl->id.name));
953 aoa_snd_ctl_add(ctl);
954 ctl = snd_ctl_new1(&lineout_detected,
956 if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE)
957 strlcpy(ctl->id.name,
958 "Headphone Detected",
959 sizeof(ctl->id.name));
960 ldev->lineout_detected_ctrl = ctl;
961 aoa_snd_ctl_add(ctl);
966 /* now update initial state */
967 if (ldev->have_headphone_detect)
968 layout_notify(&ldev->selfptr_headphone);
969 if (ldev->have_lineout_detect)
970 layout_notify(&ldev->selfptr_lineout);
973 static struct aoa_fabric layout_fabric = {
974 .name = "SoundByLayout",
975 .owner = THIS_MODULE,
976 .found_codec = layout_found_codec,
977 .remove_codec = layout_remove_codec,
978 .attached_codec = layout_attached_codec,
981 static int aoa_fabric_layout_probe(struct soundbus_dev *sdev)
983 struct device_node *sound = NULL;
984 const unsigned int *id;
985 struct layout *layout = NULL;
986 struct layout_dev *ldev = NULL;
989 /* hm, currently we can only have one ... */
993 /* by breaking out we keep a reference */
994 while ((sound = of_get_next_child(sdev->ofdev.node, sound))) {
995 if (sound->type && strcasecmp(sound->type, "soundchip") == 0)
1001 id = of_get_property(sound, "layout-id", NULL);
1003 layout = find_layout_by_id(*id);
1005 id = of_get_property(sound, "device-id", NULL);
1007 layout = find_layout_by_device(*id);
1011 printk(KERN_ERR "snd-aoa-fabric-layout: unknown layout\n");
1015 ldev = kzalloc(sizeof(struct layout_dev), GFP_KERNEL);
1019 layout_device = ldev;
1021 ldev->sound = sound;
1022 ldev->layout = layout;
1023 ldev->gpio.node = sound->parent;
1024 switch (layout->layout_id) {
1025 case 0: /* anything with device_id, not layout_id */
1026 case 41: /* that unknown machine no one seems to have */
1027 case 51: /* PowerBook5,4 */
1028 case 58: /* Mac Mini */
1029 ldev->gpio.methods = ftr_gpio_methods;
1031 "snd-aoa-fabric-layout: Using direct GPIOs\n");
1034 ldev->gpio.methods = pmf_gpio_methods;
1036 "snd-aoa-fabric-layout: Using PMF GPIOs\n");
1038 ldev->selfptr_headphone.ptr = ldev;
1039 ldev->selfptr_lineout.ptr = ldev;
1040 sdev->ofdev.dev.driver_data = ldev;
1041 list_add(&ldev->list, &layouts_list);
1042 layouts_list_items++;
1044 /* assign these before registering ourselves, so
1045 * callbacks that are done during registration
1046 * already have the values */
1047 sdev->pcmid = ldev->layout->pcmid;
1048 if (ldev->layout->busname) {
1049 sdev->pcmname = ldev->layout->busname;
1051 sdev->pcmname = "Master";
1054 ldev->gpio.methods->init(&ldev->gpio);
1056 err = aoa_fabric_register(&layout_fabric, &sdev->ofdev.dev);
1057 if (err && err != -EALREADY) {
1058 printk(KERN_INFO "snd-aoa-fabric-layout: can't use,"
1059 " another fabric is active!\n");
1064 ldev->switch_on_headphone = 1;
1065 ldev->switch_on_lineout = 1;
1068 /* we won't be using these then... */
1069 ldev->gpio.methods->exit(&ldev->gpio);
1070 /* reset if we didn't use it */
1071 sdev->pcmname = NULL;
1073 list_del(&ldev->list);
1074 layouts_list_items--;
1077 layout_device = NULL;
1082 static int aoa_fabric_layout_remove(struct soundbus_dev *sdev)
1084 struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
1087 for (i=0; i<MAX_CODECS_PER_BUS; i++) {
1088 if (ldev->codecs[i]) {
1089 aoa_fabric_unlink_codec(ldev->codecs[i]);
1091 ldev->codecs[i] = NULL;
1093 list_del(&ldev->list);
1094 layouts_list_items--;
1095 of_node_put(ldev->sound);
1097 ldev->gpio.methods->set_notify(&ldev->gpio,
1098 AOA_NOTIFY_HEADPHONE,
1101 ldev->gpio.methods->set_notify(&ldev->gpio,
1102 AOA_NOTIFY_LINE_OUT,
1106 ldev->gpio.methods->exit(&ldev->gpio);
1107 layout_device = NULL;
1110 sdev->pcmname = NULL;
1115 static int aoa_fabric_layout_suspend(struct soundbus_dev *sdev, pm_message_t state)
1117 struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
1119 if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
1120 ldev->gpio.methods->all_amps_off(&ldev->gpio);
1125 static int aoa_fabric_layout_resume(struct soundbus_dev *sdev)
1127 struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
1129 if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
1130 ldev->gpio.methods->all_amps_restore(&ldev->gpio);
1136 static struct soundbus_driver aoa_soundbus_driver = {
1137 .name = "snd_aoa_soundbus_drv",
1138 .owner = THIS_MODULE,
1139 .probe = aoa_fabric_layout_probe,
1140 .remove = aoa_fabric_layout_remove,
1142 .suspend = aoa_fabric_layout_suspend,
1143 .resume = aoa_fabric_layout_resume,
1146 .owner = THIS_MODULE,
1150 static int __init aoa_fabric_layout_init(void)
1154 err = soundbus_register_driver(&aoa_soundbus_driver);
1160 static void __exit aoa_fabric_layout_exit(void)
1162 soundbus_unregister_driver(&aoa_soundbus_driver);
1163 aoa_fabric_unregister(&layout_fabric);
1166 module_init(aoa_fabric_layout_init);
1167 module_exit(aoa_fabric_layout_exit);