Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
[linux-2.6] / drivers / i2c / busses / i2c-s3c2410.c
1 /* linux/drivers/i2c/busses/i2c-s3c2410.c
2  *
3  * Copyright (C) 2004,2005 Simtec Electronics
4  *      Ben Dooks <ben@simtec.co.uk>
5  *
6  * S3C2410 I2C Controller
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
21 */
22
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25
26 #include <linux/i2c.h>
27 #include <linux/i2c-id.h>
28 #include <linux/init.h>
29 #include <linux/time.h>
30 #include <linux/interrupt.h>
31 #include <linux/delay.h>
32 #include <linux/errno.h>
33 #include <linux/err.h>
34 #include <linux/platform_device.h>
35 #include <linux/clk.h>
36
37 #include <asm/hardware.h>
38 #include <asm/irq.h>
39 #include <asm/io.h>
40
41 #include <asm/arch/regs-gpio.h>
42 #include <asm/arch/regs-iic.h>
43 #include <asm/arch/iic.h>
44
45 /* i2c controller state */
46
47 enum s3c24xx_i2c_state {
48         STATE_IDLE,
49         STATE_START,
50         STATE_READ,
51         STATE_WRITE,
52         STATE_STOP
53 };
54
55 struct s3c24xx_i2c {
56         spinlock_t              lock;
57         wait_queue_head_t       wait;
58
59         struct i2c_msg          *msg;
60         unsigned int            msg_num;
61         unsigned int            msg_idx;
62         unsigned int            msg_ptr;
63
64         unsigned int            tx_setup;
65
66         enum s3c24xx_i2c_state  state;
67
68         void __iomem            *regs;
69         struct clk              *clk;
70         struct device           *dev;
71         struct resource         *irq;
72         struct resource         *ioarea;
73         struct i2c_adapter      adap;
74 };
75
76 /* default platform data to use if not supplied in the platform_device
77 */
78
79 static struct s3c2410_platform_i2c s3c24xx_i2c_default_platform = {
80         .flags          = 0,
81         .slave_addr     = 0x10,
82         .bus_freq       = 100*1000,
83         .max_freq       = 400*1000,
84         .sda_delay      = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
85 };
86
87 /* s3c24xx_i2c_is2440()
88  *
89  * return true is this is an s3c2440
90 */
91
92 static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
93 {
94         struct platform_device *pdev = to_platform_device(i2c->dev);
95
96         return !strcmp(pdev->name, "s3c2440-i2c");
97 }
98
99
100 /* s3c24xx_i2c_get_platformdata
101  *
102  * get the platform data associated with the given device, or return
103  * the default if there is none
104 */
105
106 static inline struct s3c2410_platform_i2c *s3c24xx_i2c_get_platformdata(struct device *dev)
107 {
108         if (dev->platform_data != NULL)
109                 return (struct s3c2410_platform_i2c *)dev->platform_data;
110
111         return &s3c24xx_i2c_default_platform;
112 }
113
114 /* s3c24xx_i2c_master_complete
115  *
116  * complete the message and wake up the caller, using the given return code,
117  * or zero to mean ok.
118 */
119
120 static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret)
121 {
122         dev_dbg(i2c->dev, "master_complete %d\n", ret);
123
124         i2c->msg_ptr = 0;
125         i2c->msg = NULL;
126         i2c->msg_idx ++;
127         i2c->msg_num = 0;
128         if (ret)
129                 i2c->msg_idx = ret;
130
131         wake_up(&i2c->wait);
132 }
133
134 static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c)
135 {
136         unsigned long tmp;
137         
138         tmp = readl(i2c->regs + S3C2410_IICCON);
139         writel(tmp & ~S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
140
141 }
142
143 static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c)
144 {
145         unsigned long tmp;
146         
147         tmp = readl(i2c->regs + S3C2410_IICCON);
148         writel(tmp | S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
149
150 }
151
152 /* irq enable/disable functions */
153
154 static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c)
155 {
156         unsigned long tmp;
157         
158         tmp = readl(i2c->regs + S3C2410_IICCON);
159         writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
160 }
161
162 static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c)
163 {
164         unsigned long tmp;
165         
166         tmp = readl(i2c->regs + S3C2410_IICCON);
167         writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
168 }
169
170
171 /* s3c24xx_i2c_message_start
172  *
173  * put the start of a message onto the bus 
174 */
175
176 static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, 
177                                       struct i2c_msg *msg)
178 {
179         unsigned int addr = (msg->addr & 0x7f) << 1;
180         unsigned long stat;
181         unsigned long iiccon;
182
183         stat = 0;
184         stat |=  S3C2410_IICSTAT_TXRXEN;
185
186         if (msg->flags & I2C_M_RD) {
187                 stat |= S3C2410_IICSTAT_MASTER_RX;
188                 addr |= 1;
189         } else
190                 stat |= S3C2410_IICSTAT_MASTER_TX;
191
192         if (msg->flags & I2C_M_REV_DIR_ADDR)
193                 addr ^= 1;
194
195         // todo - check for wether ack wanted or not
196         s3c24xx_i2c_enable_ack(i2c);
197
198         iiccon = readl(i2c->regs + S3C2410_IICCON);
199         writel(stat, i2c->regs + S3C2410_IICSTAT);
200         
201         dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr);
202         writeb(addr, i2c->regs + S3C2410_IICDS);
203         
204         /* delay here to ensure the data byte has gotten onto the bus
205          * before the transaction is started */
206
207         ndelay(i2c->tx_setup);
208
209         dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon);
210         writel(iiccon, i2c->regs + S3C2410_IICCON);
211         
212         stat |=  S3C2410_IICSTAT_START;
213         writel(stat, i2c->regs + S3C2410_IICSTAT);
214 }
215
216 static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
217 {
218         unsigned long iicstat = readl(i2c->regs + S3C2410_IICSTAT);
219
220         dev_dbg(i2c->dev, "STOP\n");
221
222         /* stop the transfer */
223         iicstat &= ~ S3C2410_IICSTAT_START;
224         writel(iicstat, i2c->regs + S3C2410_IICSTAT);
225         
226         i2c->state = STATE_STOP;
227         
228         s3c24xx_i2c_master_complete(i2c, ret);
229         s3c24xx_i2c_disable_irq(i2c);
230 }
231
232 /* helper functions to determine the current state in the set of
233  * messages we are sending */
234
235 /* is_lastmsg()
236  *
237  * returns TRUE if the current message is the last in the set 
238 */
239
240 static inline int is_lastmsg(struct s3c24xx_i2c *i2c)
241 {
242         return i2c->msg_idx >= (i2c->msg_num - 1);
243 }
244
245 /* is_msglast
246  *
247  * returns TRUE if we this is the last byte in the current message
248 */
249
250 static inline int is_msglast(struct s3c24xx_i2c *i2c)
251 {
252         return i2c->msg_ptr == i2c->msg->len-1;
253 }
254
255 /* is_msgend
256  *
257  * returns TRUE if we reached the end of the current message
258 */
259
260 static inline int is_msgend(struct s3c24xx_i2c *i2c)
261 {
262         return i2c->msg_ptr >= i2c->msg->len;
263 }
264
265 /* i2s_s3c_irq_nextbyte
266  *
267  * process an interrupt and work out what to do
268  */
269
270 static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
271 {
272         unsigned long tmp;
273         unsigned char byte;
274         int ret = 0;
275
276         switch (i2c->state) {
277
278         case STATE_IDLE:
279                 dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __FUNCTION__);
280                 goto out;
281                 break;
282
283         case STATE_STOP:
284                 dev_err(i2c->dev, "%s: called in STATE_STOP\n", __FUNCTION__);
285                 s3c24xx_i2c_disable_irq(i2c);           
286                 goto out_ack;
287
288         case STATE_START:
289                 /* last thing we did was send a start condition on the
290                  * bus, or started a new i2c message
291                  */
292                 
293                 if (iicstat  & S3C2410_IICSTAT_LASTBIT &&
294                     !(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
295                         /* ack was not received... */
296
297                         dev_dbg(i2c->dev, "ack was not received\n");
298                         s3c24xx_i2c_stop(i2c, -EREMOTEIO);
299                         goto out_ack;
300                 }
301
302                 if (i2c->msg->flags & I2C_M_RD)
303                         i2c->state = STATE_READ;
304                 else
305                         i2c->state = STATE_WRITE;
306
307                 /* terminate the transfer if there is nothing to do
308                  * (used by the i2c probe to find devices */
309
310                 if (is_lastmsg(i2c) && i2c->msg->len == 0) {
311                         s3c24xx_i2c_stop(i2c, 0);
312                         goto out_ack;
313                 }
314
315                 if (i2c->state == STATE_READ)
316                         goto prepare_read;
317
318                 /* fall through to the write state, as we will need to 
319                  * send a byte as well */
320
321         case STATE_WRITE:
322                 /* we are writing data to the device... check for the
323                  * end of the message, and if so, work out what to do
324                  */
325
326         retry_write:
327                 if (!is_msgend(i2c)) {
328                         byte = i2c->msg->buf[i2c->msg_ptr++];
329                         writeb(byte, i2c->regs + S3C2410_IICDS);
330
331                         /* delay after writing the byte to allow the
332                          * data setup time on the bus, as writing the
333                          * data to the register causes the first bit
334                          * to appear on SDA, and SCL will change as
335                          * soon as the interrupt is acknowledged */
336
337                         ndelay(i2c->tx_setup);
338
339                 } else if (!is_lastmsg(i2c)) {
340                         /* we need to go to the next i2c message */
341
342                         dev_dbg(i2c->dev, "WRITE: Next Message\n");
343
344                         i2c->msg_ptr = 0;
345                         i2c->msg_idx ++;
346                         i2c->msg++;
347                         
348                         /* check to see if we need to do another message */
349                         if (i2c->msg->flags & I2C_M_NOSTART) {
350
351                                 if (i2c->msg->flags & I2C_M_RD) {
352                                         /* cannot do this, the controller
353                                          * forces us to send a new START
354                                          * when we change direction */
355
356                                         s3c24xx_i2c_stop(i2c, -EINVAL);
357                                 }
358
359                                 goto retry_write;
360                         } else {
361                         
362                                 /* send the new start */
363                                 s3c24xx_i2c_message_start(i2c, i2c->msg);
364                                 i2c->state = STATE_START;
365                         }
366
367                 } else {
368                         /* send stop */
369
370                         s3c24xx_i2c_stop(i2c, 0);
371                 }
372                 break;
373
374         case STATE_READ:
375                 /* we have a byte of data in the data register, do 
376                  * something with it, and then work out wether we are
377                  * going to do any more read/write
378                  */
379
380                 if (!(i2c->msg->flags & I2C_M_IGNORE_NAK) &&
381                     !(is_msglast(i2c) && is_lastmsg(i2c))) {
382
383                         if (iicstat & S3C2410_IICSTAT_LASTBIT) {
384                                 dev_dbg(i2c->dev, "READ: No Ack\n");
385
386                                 s3c24xx_i2c_stop(i2c, -ECONNREFUSED);
387                                 goto out_ack;
388                         }
389                 }
390
391                 byte = readb(i2c->regs + S3C2410_IICDS);
392                 i2c->msg->buf[i2c->msg_ptr++] = byte;
393
394         prepare_read:
395                 if (is_msglast(i2c)) {
396                         /* last byte of buffer */
397
398                         if (is_lastmsg(i2c))
399                                 s3c24xx_i2c_disable_ack(i2c);
400                         
401                 } else if (is_msgend(i2c)) {
402                         /* ok, we've read the entire buffer, see if there
403                          * is anything else we need to do */
404
405                         if (is_lastmsg(i2c)) {
406                                 /* last message, send stop and complete */
407                                 dev_dbg(i2c->dev, "READ: Send Stop\n");
408
409                                 s3c24xx_i2c_stop(i2c, 0);
410                         } else {
411                                 /* go to the next transfer */
412                                 dev_dbg(i2c->dev, "READ: Next Transfer\n");
413
414                                 i2c->msg_ptr = 0;
415                                 i2c->msg_idx++;
416                                 i2c->msg++;
417                         }
418                 }
419
420                 break;
421         }
422
423         /* acknowlegde the IRQ and get back on with the work */
424
425  out_ack:
426         tmp = readl(i2c->regs + S3C2410_IICCON);        
427         tmp &= ~S3C2410_IICCON_IRQPEND;
428         writel(tmp, i2c->regs + S3C2410_IICCON);
429  out:
430         return ret;
431 }
432
433 /* s3c24xx_i2c_irq
434  *
435  * top level IRQ servicing routine
436 */
437
438 static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id)
439 {
440         struct s3c24xx_i2c *i2c = dev_id;
441         unsigned long status;
442         unsigned long tmp;
443
444         status = readl(i2c->regs + S3C2410_IICSTAT);
445
446         if (status & S3C2410_IICSTAT_ARBITR) {
447                 // deal with arbitration loss
448                 dev_err(i2c->dev, "deal with arbitration loss\n");
449         }
450
451         if (i2c->state == STATE_IDLE) {
452                 dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n");
453
454                 tmp = readl(i2c->regs + S3C2410_IICCON);        
455                 tmp &= ~S3C2410_IICCON_IRQPEND;
456                 writel(tmp, i2c->regs +  S3C2410_IICCON);
457                 goto out;
458         }
459         
460         /* pretty much this leaves us with the fact that we've
461          * transmitted or received whatever byte we last sent */
462
463         i2s_s3c_irq_nextbyte(i2c, status);
464
465  out:
466         return IRQ_HANDLED;
467 }
468
469
470 /* s3c24xx_i2c_set_master
471  *
472  * get the i2c bus for a master transaction
473 */
474
475 static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
476 {
477         unsigned long iicstat;
478         int timeout = 400;
479
480         while (timeout-- > 0) {
481                 iicstat = readl(i2c->regs + S3C2410_IICSTAT);
482                 
483                 if (!(iicstat & S3C2410_IICSTAT_BUSBUSY))
484                         return 0;
485
486                 msleep(1);
487         }
488
489         dev_dbg(i2c->dev, "timeout: GPEDAT is %08x\n",
490                 __raw_readl(S3C2410_GPEDAT));
491
492         return -ETIMEDOUT;
493 }
494
495 /* s3c24xx_i2c_doxfer
496  *
497  * this starts an i2c transfer
498 */
499
500 static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int num)
501 {
502         unsigned long timeout;
503         int ret;
504
505         ret = s3c24xx_i2c_set_master(i2c);
506         if (ret != 0) {
507                 dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
508                 ret = -EAGAIN;
509                 goto out;
510         }
511
512         spin_lock_irq(&i2c->lock);
513
514         i2c->msg     = msgs;
515         i2c->msg_num = num;
516         i2c->msg_ptr = 0;
517         i2c->msg_idx = 0;
518         i2c->state   = STATE_START;
519
520         s3c24xx_i2c_enable_irq(i2c);
521         s3c24xx_i2c_message_start(i2c, msgs);
522         spin_unlock_irq(&i2c->lock);
523         
524         timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
525
526         ret = i2c->msg_idx;
527
528         /* having these next two as dev_err() makes life very 
529          * noisy when doing an i2cdetect */
530
531         if (timeout == 0)
532                 dev_dbg(i2c->dev, "timeout\n");
533         else if (ret != num)
534                 dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
535
536         /* ensure the stop has been through the bus */
537
538         msleep(1);
539
540  out:
541         return ret;
542 }
543
544 /* s3c24xx_i2c_xfer
545  *
546  * first port of call from the i2c bus code when an message needs
547  * transferring across the i2c bus.
548 */
549
550 static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
551                         struct i2c_msg *msgs, int num)
552 {
553         struct s3c24xx_i2c *i2c = (struct s3c24xx_i2c *)adap->algo_data;
554         int retry;
555         int ret;
556
557         for (retry = 0; retry < adap->retries; retry++) {
558
559                 ret = s3c24xx_i2c_doxfer(i2c, msgs, num);
560
561                 if (ret != -EAGAIN)
562                         return ret;
563
564                 dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
565
566                 udelay(100);
567         }
568
569         return -EREMOTEIO;
570 }
571
572 /* declare our i2c functionality */
573 static u32 s3c24xx_i2c_func(struct i2c_adapter *adap)
574 {
575         return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
576 }
577
578 /* i2c bus registration info */
579
580 static const struct i2c_algorithm s3c24xx_i2c_algorithm = {
581         .master_xfer            = s3c24xx_i2c_xfer,
582         .functionality          = s3c24xx_i2c_func,
583 };
584
585 static struct s3c24xx_i2c s3c24xx_i2c = {
586         .lock           = __SPIN_LOCK_UNLOCKED(s3c24xx_i2c.lock),
587         .wait           = __WAIT_QUEUE_HEAD_INITIALIZER(s3c24xx_i2c.wait),
588         .tx_setup       = 50,
589         .adap           = {
590                 .name                   = "s3c2410-i2c",
591                 .owner                  = THIS_MODULE,
592                 .algo                   = &s3c24xx_i2c_algorithm,
593                 .retries                = 2,
594                 .class                  = I2C_CLASS_HWMON,
595         },
596 };
597
598 /* s3c24xx_i2c_calcdivisor
599  *
600  * return the divisor settings for a given frequency
601 */
602
603 static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted,
604                                    unsigned int *div1, unsigned int *divs)
605 {
606         unsigned int calc_divs = clkin / wanted;
607         unsigned int calc_div1;
608
609         if (calc_divs > (16*16))
610                 calc_div1 = 512;
611         else
612                 calc_div1 = 16;
613
614         calc_divs += calc_div1-1;
615         calc_divs /= calc_div1;
616
617         if (calc_divs == 0)
618                 calc_divs = 1;
619         if (calc_divs > 17)
620                 calc_divs = 17;
621
622         *divs = calc_divs;
623         *div1 = calc_div1;
624
625         return clkin / (calc_divs * calc_div1);
626 }
627
628 /* freq_acceptable
629  *
630  * test wether a frequency is within the acceptable range of error
631 */
632
633 static inline int freq_acceptable(unsigned int freq, unsigned int wanted)
634 {
635         int diff = freq - wanted;
636
637         return (diff >= -2 && diff <= 2);
638 }
639
640 /* s3c24xx_i2c_getdivisor
641  *
642  * work out a divisor for the user requested frequency setting,
643  * either by the requested frequency, or scanning the acceptable
644  * range of frequencies until something is found
645 */
646
647 static int s3c24xx_i2c_getdivisor(struct s3c24xx_i2c *i2c,
648                                   struct s3c2410_platform_i2c *pdata,
649                                   unsigned long *iicon,
650                                   unsigned int *got)
651 {
652         unsigned long clkin = clk_get_rate(i2c->clk);
653         
654         unsigned int divs, div1;
655         int freq;
656         int start, end;
657
658         clkin /= 1000;          /* clkin now in KHz */
659      
660         dev_dbg(i2c->dev,  "pdata %p, freq %lu %lu..%lu\n",
661                  pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq);
662
663         if (pdata->bus_freq != 0) {
664                 freq = s3c24xx_i2c_calcdivisor(clkin, pdata->bus_freq/1000,
665                                                &div1, &divs);
666                 if (freq_acceptable(freq, pdata->bus_freq/1000))
667                         goto found;
668         }
669
670         /* ok, we may have to search for something suitable... */
671
672         start = (pdata->max_freq == 0) ? pdata->bus_freq : pdata->max_freq;
673         end = pdata->min_freq;
674
675         start /= 1000;
676         end /= 1000;
677
678         /* search loop... */
679
680         for (; start > end; start--) {
681                 freq = s3c24xx_i2c_calcdivisor(clkin, start, &div1, &divs);
682                 if (freq_acceptable(freq, start))
683                         goto found;
684         }
685
686         /* cannot find frequency spec */
687
688         return -EINVAL;
689
690  found:
691         *got = freq;
692         *iicon |= (divs-1);
693         *iicon |= (div1 == 512) ? S3C2410_IICCON_TXDIV_512 : 0;
694         return 0;
695 }
696
697 /* s3c24xx_i2c_init
698  *
699  * initialise the controller, set the IO lines and frequency 
700 */
701
702 static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
703 {
704         unsigned long iicon = S3C2410_IICCON_IRQEN | S3C2410_IICCON_ACKEN;
705         struct s3c2410_platform_i2c *pdata;
706         unsigned int freq;
707
708         /* get the plafrom data */
709
710         pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent);
711
712         /* inititalise the gpio */
713
714         s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
715         s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
716
717         /* write slave address */
718         
719         writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD);
720
721         dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
722
723         /* we need to work out the divisors for the clock... */
724
725         if (s3c24xx_i2c_getdivisor(i2c, pdata, &iicon, &freq) != 0) {
726                 dev_err(i2c->dev, "cannot meet bus frequency required\n");
727                 return -EINVAL;
728         }
729
730         /* todo - check that the i2c lines aren't being dragged anywhere */
731
732         dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
733         dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
734         
735         writel(iicon, i2c->regs + S3C2410_IICCON);
736
737         /* check for s3c2440 i2c controller  */
738
739         if (s3c24xx_i2c_is2440(i2c)) {
740                 dev_dbg(i2c->dev, "S3C2440_IICLC=%08x\n", pdata->sda_delay);
741
742                 writel(pdata->sda_delay, i2c->regs + S3C2440_IICLC);
743         }
744
745         return 0;
746 }
747
748 /* s3c24xx_i2c_probe
749  *
750  * called by the bus driver when a suitable device is found
751 */
752
753 static int s3c24xx_i2c_probe(struct platform_device *pdev)
754 {
755         struct s3c24xx_i2c *i2c = &s3c24xx_i2c;
756         struct resource *res;
757         int ret;
758
759         /* find the clock and enable it */
760
761         i2c->dev = &pdev->dev;
762         i2c->clk = clk_get(&pdev->dev, "i2c");
763         if (IS_ERR(i2c->clk)) {
764                 dev_err(&pdev->dev, "cannot get clock\n");
765                 ret = -ENOENT;
766                 goto err_noclk;
767         }
768
769         dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
770
771         clk_enable(i2c->clk);
772
773         /* map the registers */
774
775         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
776         if (res == NULL) {
777                 dev_err(&pdev->dev, "cannot find IO resource\n");
778                 ret = -ENOENT;
779                 goto err_clk;
780         }
781
782         i2c->ioarea = request_mem_region(res->start, (res->end-res->start)+1,
783                                          pdev->name);
784
785         if (i2c->ioarea == NULL) {
786                 dev_err(&pdev->dev, "cannot request IO\n");
787                 ret = -ENXIO;
788                 goto err_clk;
789         }
790
791         i2c->regs = ioremap(res->start, (res->end-res->start)+1);
792
793         if (i2c->regs == NULL) {
794                 dev_err(&pdev->dev, "cannot map IO\n");
795                 ret = -ENXIO;
796                 goto err_ioarea;
797         }
798
799         dev_dbg(&pdev->dev, "registers %p (%p, %p)\n", i2c->regs, i2c->ioarea, res);
800
801         /* setup info block for the i2c core */
802
803         i2c->adap.algo_data = i2c;
804         i2c->adap.dev.parent = &pdev->dev;
805
806         /* initialise the i2c controller */
807
808         ret = s3c24xx_i2c_init(i2c);
809         if (ret != 0)
810                 goto err_iomap;
811
812         /* find the IRQ for this unit (note, this relies on the init call to
813          * ensure no current IRQs pending 
814          */
815
816         res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
817         if (res == NULL) {
818                 dev_err(&pdev->dev, "cannot find IRQ\n");
819                 ret = -ENOENT;
820                 goto err_iomap;
821         }
822
823         ret = request_irq(res->start, s3c24xx_i2c_irq, IRQF_DISABLED,
824                           pdev->name, i2c);
825
826         if (ret != 0) {
827                 dev_err(&pdev->dev, "cannot claim IRQ\n");
828                 goto err_iomap;
829         }
830
831         i2c->irq = res;
832                 
833         dev_dbg(&pdev->dev, "irq resource %p (%ld)\n", res, res->start);
834
835         ret = i2c_add_adapter(&i2c->adap);
836         if (ret < 0) {
837                 dev_err(&pdev->dev, "failed to add bus to i2c core\n");
838                 goto err_irq;
839         }
840
841         platform_set_drvdata(pdev, i2c);
842
843         dev_info(&pdev->dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id);
844         return 0;
845
846  err_irq:
847         free_irq(i2c->irq->start, i2c);
848
849  err_iomap:
850         iounmap(i2c->regs);
851
852  err_ioarea:
853         release_resource(i2c->ioarea);
854         kfree(i2c->ioarea);
855
856  err_clk:
857         clk_disable(i2c->clk);
858         clk_put(i2c->clk);
859
860  err_noclk:
861         return ret;
862 }
863
864 /* s3c24xx_i2c_remove
865  *
866  * called when device is removed from the bus
867 */
868
869 static int s3c24xx_i2c_remove(struct platform_device *pdev)
870 {
871         struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
872
873         i2c_del_adapter(&i2c->adap);
874         free_irq(i2c->irq->start, i2c);
875
876         clk_disable(i2c->clk);
877         clk_put(i2c->clk);
878
879         iounmap(i2c->regs);
880
881         release_resource(i2c->ioarea);
882         kfree(i2c->ioarea);
883
884         return 0;
885 }
886
887 #ifdef CONFIG_PM
888 static int s3c24xx_i2c_resume(struct platform_device *dev)
889 {
890         struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
891
892         if (i2c != NULL)
893                 s3c24xx_i2c_init(i2c);
894
895         return 0;
896 }
897
898 #else
899 #define s3c24xx_i2c_resume NULL
900 #endif
901
902 /* device driver for platform bus bits */
903
904 static struct platform_driver s3c2410_i2c_driver = {
905         .probe          = s3c24xx_i2c_probe,
906         .remove         = s3c24xx_i2c_remove,
907         .resume         = s3c24xx_i2c_resume,
908         .driver         = {
909                 .owner  = THIS_MODULE,
910                 .name   = "s3c2410-i2c",
911         },
912 };
913
914 static struct platform_driver s3c2440_i2c_driver = {
915         .probe          = s3c24xx_i2c_probe,
916         .remove         = s3c24xx_i2c_remove,
917         .resume         = s3c24xx_i2c_resume,
918         .driver         = {
919                 .owner  = THIS_MODULE,
920                 .name   = "s3c2440-i2c",
921         },
922 };
923
924 static int __init i2c_adap_s3c_init(void)
925 {
926         int ret;
927
928         ret = platform_driver_register(&s3c2410_i2c_driver);
929         if (ret == 0) {
930                 ret = platform_driver_register(&s3c2440_i2c_driver);
931                 if (ret)
932                         platform_driver_unregister(&s3c2410_i2c_driver);
933         }
934
935         return ret;
936 }
937
938 static void __exit i2c_adap_s3c_exit(void)
939 {
940         platform_driver_unregister(&s3c2410_i2c_driver);
941         platform_driver_unregister(&s3c2440_i2c_driver);
942 }
943
944 module_init(i2c_adap_s3c_init);
945 module_exit(i2c_adap_s3c_exit);
946
947 MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
948 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
949 MODULE_LICENSE("GPL");