git.oblomov.eu Git - linux-2.6/blob - drivers/staging/rtl8187se/r8180_93cx6.c

   1 /*
   2    This files contains card eeprom (93c46 or 93c56) programming routines,
   3    memory is addressed by 16 bits words.
   4
   5    This is part of rtl8180 OpenSource driver.
   6    Copyright (C) Andrea Merello 2004  <andreamrl@tiscali.it>
   7    Released under the terms of GPL (General Public Licence)
   8
   9    Parts of this driver are based on the GPL part of the
  10    official realtek driver.
  11
  12    Parts of this driver are based on the rtl8180 driver skeleton
  13    from Patric Schenke & Andres Salomon.
  14
  15    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
  16
  17    We want to tanks the Authors of those projects and the Ndiswrapper
  18    project Authors.
  19 */
  20
  21 #include "r8180_93cx6.h"
  22
  23 void eprom_cs(struct net_device *dev, short bit)
  24 {
  25         if(bit)
  26                 write_nic_byte(dev, EPROM_CMD,
  27                                (1<<EPROM_CS_SHIFT) | \
  28                                read_nic_byte(dev, EPROM_CMD)); //enable EPROM
  29         else
  30                 write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev, EPROM_CMD)\
  31                                &~(1<<EPROM_CS_SHIFT)); //disable EPROM
  32
  33         force_pci_posting(dev);
  34         udelay(EPROM_DELAY);
  35 }
  36
  37
  38 void eprom_ck_cycle(struct net_device *dev)
  39 {
  40         write_nic_byte(dev, EPROM_CMD,
  41                        (1<<EPROM_CK_SHIFT) | read_nic_byte(dev,EPROM_CMD));
  42         force_pci_posting(dev);
  43         udelay(EPROM_DELAY);
  44         write_nic_byte(dev, EPROM_CMD,
  45                        read_nic_byte(dev, EPROM_CMD) &~ (1<<EPROM_CK_SHIFT));
  46         force_pci_posting(dev);
  47         udelay(EPROM_DELAY);
  48 }
  49
  50
  51 void eprom_w(struct net_device *dev,short bit)
  52 {
  53         if(bit)
  54                 write_nic_byte(dev, EPROM_CMD, (1<<EPROM_W_SHIFT) | \
  55                                read_nic_byte(dev,EPROM_CMD));
  56         else
  57                 write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev,EPROM_CMD)\
  58                                &~(1<<EPROM_W_SHIFT));
  59
  60         force_pci_posting(dev);
  61         udelay(EPROM_DELAY);
  62 }
  63
  64
  65 short eprom_r(struct net_device *dev)
  66 {
  67         short bit;
  68
  69         bit=(read_nic_byte(dev, EPROM_CMD) & (1<<EPROM_R_SHIFT) );
  70         udelay(EPROM_DELAY);
  71
  72         if(bit) return 1;
  73         return 0;
  74 }
  75
  76
  77 void eprom_send_bits_string(struct net_device *dev, short b[], int len)
  78 {
  79         int i;
  80
  81         for(i=0; i<len; i++){
  82                 eprom_w(dev, b[i]);
  83                 eprom_ck_cycle(dev);
  84         }
  85 }
  86
  87
  88 u32 eprom_read(struct net_device *dev, u32 addr)
  89 {
  90         struct r8180_priv *priv = ieee80211_priv(dev);
  91         short read_cmd[]={1,1,0};
  92         short addr_str[8];
  93         int i;
  94         int addr_len;
  95         u32 ret;
  96
  97         ret=0;
  98         //enable EPROM programming
  99         write_nic_byte(dev, EPROM_CMD,
 100                        (EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
 101         force_pci_posting(dev);
 102         udelay(EPROM_DELAY);
 103
 104         if (priv->epromtype==EPROM_93c56){
 105                 addr_str[7]=addr & 1;
 106                 addr_str[6]=addr & (1<<1);
 107                 addr_str[5]=addr & (1<<2);
 108                 addr_str[4]=addr & (1<<3);
 109                 addr_str[3]=addr & (1<<4);
 110                 addr_str[2]=addr & (1<<5);
 111                 addr_str[1]=addr & (1<<6);
 112                 addr_str[0]=addr & (1<<7);
 113                 addr_len=8;
 114         }else{
 115                 addr_str[5]=addr & 1;
 116                 addr_str[4]=addr & (1<<1);
 117                 addr_str[3]=addr & (1<<2);
 118                 addr_str[2]=addr & (1<<3);
 119                 addr_str[1]=addr & (1<<4);
 120                 addr_str[0]=addr & (1<<5);
 121                 addr_len=6;
 122         }
 123         eprom_cs(dev, 1);
 124         eprom_ck_cycle(dev);
 125         eprom_send_bits_string(dev, read_cmd, 3);
 126         eprom_send_bits_string(dev, addr_str, addr_len);
 127
 128         //keep chip pin D to low state while reading.
 129         //I'm unsure if it is necessary, but anyway shouldn't hurt
 130         eprom_w(dev, 0);
 131
 132         for(i=0;i<16;i++){
 133                 //eeprom needs a clk cycle between writing opcode&adr
 134                 //and reading data. (eeprom outs a dummy 0)
 135                 eprom_ck_cycle(dev);
 136                 ret |= (eprom_r(dev)<<(15-i));
 137         }
 138
 139         eprom_cs(dev, 0);
 140         eprom_ck_cycle(dev);
 141
 142         //disable EPROM programming
 143         write_nic_byte(dev, EPROM_CMD,
 144                        (EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
 145         return ret;
 146 }