git.oblomov.eu Git - linux-2.6/blob - arch/powerpc/kernel/head_booke.h

   1 #ifndef __HEAD_BOOKE_H__
   2 #define __HEAD_BOOKE_H__
   3
   4 /*
   5  * Macros used for common Book-e exception handling
   6  */
   7
   8 #define SET_IVOR(vector_number, vector_label)           \
   9                 li      r26,vector_label@l;             \
  10                 mtspr   SPRN_IVOR##vector_number,r26;   \
  11                 sync
  12
  13 #define NORMAL_EXCEPTION_PROLOG                                              \
  14         mtspr   SPRN_SPRG0,r10;         /* save two registers to work with */\
  15         mtspr   SPRN_SPRG1,r11;                                              \
  16         mtspr   SPRN_SPRG4W,r1;                                              \
  17         mfcr    r10;                    /* save CR in r10 for now          */\
  18         mfspr   r11,SPRN_SRR1;          /* check whether user or kernel    */\
  19         andi.   r11,r11,MSR_PR;                                              \
  20         beq     1f;                                                          \
  21         mfspr   r1,SPRN_SPRG3;          /* if from user, start at top of   */\
  22         lwz     r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
  23         addi    r1,r1,THREAD_SIZE;                                           \
  24 1:      subi    r1,r1,INT_FRAME_SIZE;   /* Allocate an exception frame     */\
  25         mr      r11,r1;                                                      \
  26         stw     r10,_CCR(r11);          /* save various registers          */\
  27         stw     r12,GPR12(r11);                                              \
  28         stw     r9,GPR9(r11);                                                \
  29         mfspr   r10,SPRN_SPRG0;                                              \
  30         stw     r10,GPR10(r11);                                              \
  31         mfspr   r12,SPRN_SPRG1;                                              \
  32         stw     r12,GPR11(r11);                                              \
  33         mflr    r10;                                                         \
  34         stw     r10,_LINK(r11);                                              \
  35         mfspr   r10,SPRN_SPRG4R;                                             \
  36         mfspr   r12,SPRN_SRR0;                                               \
  37         stw     r10,GPR1(r11);                                               \
  38         mfspr   r9,SPRN_SRR1;                                                \
  39         stw     r10,0(r11);                                                  \
  40         rlwinm  r9,r9,0,14,12;          /* clear MSR_WE (necessary?)       */\
  41         stw     r0,GPR0(r11);                                                \
  42         SAVE_4GPRS(3, r11);                                                  \
  43         SAVE_2GPRS(7, r11)
  44
  45 /* To handle the additional exception priority levels on 40x and Book-E
  46  * processors we allocate a stack per additional priority level.
  47  *
  48  * On 40x critical is the only additional level
  49  * On 44x/e500 we have critical and machine check
  50  * On e200 we have critical and debug (machine check occurs via critical)
  51  *
  52  * Additionally we reserve a SPRG for each priority level so we can free up a
  53  * GPR to use as the base for indirect access to the exception stacks.  This
  54  * is necessary since the MMU is always on, for Book-E parts, and the stacks
  55  * are offset from KERNELBASE.
  56  *
  57  * There is some space optimization to be had here if desired.  However
  58  * to allow for a common kernel with support for debug exceptions either
  59  * going to critical or their own debug level we aren't currently
  60  * providing configurations that micro-optimize space usage.
  61  */
  62
  63 /* CRIT_SPRG only used in critical exception handling */
  64 #define CRIT_SPRG       SPRN_SPRG2
  65 /* MCHECK_SPRG only used in machine check exception handling */
  66 #define MCHECK_SPRG     SPRN_SPRG6W
  67
  68 #define MCHECK_STACK_BASE       mcheckirq_ctx
  69 #define CRIT_STACK_BASE         critirq_ctx
  70
  71 /* only on e500mc/e200 */
  72 #define DEBUG_STACK_BASE        dbgirq_ctx
  73 #ifdef CONFIG_PPC_E500MC
  74 #define DEBUG_SPRG              SPRN_SPRG9
  75 #else
  76 #define DEBUG_SPRG              SPRN_SPRG6W
  77 #endif
  78
  79 #define EXC_LVL_FRAME_OVERHEAD  (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
  80
  81 #ifdef CONFIG_SMP
  82 #define BOOKE_LOAD_EXC_LEVEL_STACK(level)               \
  83         mfspr   r8,SPRN_PIR;                            \
  84         slwi    r8,r8,2;                                \
  85         addis   r8,r8,level##_STACK_BASE@ha;            \
  86         lwz     r8,level##_STACK_BASE@l(r8);            \
  87         addi    r8,r8,EXC_LVL_FRAME_OVERHEAD;
  88 #else
  89 #define BOOKE_LOAD_EXC_LEVEL_STACK(level)               \
  90         lis     r8,level##_STACK_BASE@ha;               \
  91         lwz     r8,level##_STACK_BASE@l(r8);            \
  92         addi    r8,r8,EXC_LVL_FRAME_OVERHEAD;
  93 #endif
  94
  95 /*
  96  * Exception prolog for critical/machine check exceptions.  This is a
  97  * little different from the normal exception prolog above since a
  98  * critical/machine check exception can potentially occur at any point
  99  * during normal exception processing. Thus we cannot use the same SPRG
 100  * registers as the normal prolog above. Instead we use a portion of the
 101  * critical/machine check exception stack at low physical addresses.
 102  */
 103 #define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \
 104         mtspr   exc_level##_SPRG,r8;                                         \
 105         BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
 106         stw     r9,GPR9(r8);            /* save various registers          */\
 107         mfcr    r9;                     /* save CR in r9 for now           */\
 108         stw     r10,GPR10(r8);                                               \
 109         stw     r11,GPR11(r8);                                               \
 110         stw     r9,_CCR(r8);            /* save CR on stack                */\
 111         mfspr   r10,exc_level_srr1;     /* check whether user or kernel    */\
 112         andi.   r10,r10,MSR_PR;                                              \
 113         mfspr   r11,SPRN_SPRG3;         /* if from user, start at top of   */\
 114         lwz     r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
 115         addi    r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame    */\
 116         beq     1f;                                                          \
 117         /* COMING FROM USER MODE */                                          \
 118         stw     r9,_CCR(r11);           /* save CR                         */\
 119         lwz     r10,GPR10(r8);          /* copy regs from exception stack  */\
 120         lwz     r9,GPR9(r8);                                                 \
 121         stw     r10,GPR10(r11);                                              \
 122         lwz     r10,GPR11(r8);                                               \
 123         stw     r9,GPR9(r11);                                                \
 124         stw     r10,GPR11(r11);                                              \
 125         b       2f;                                                          \
 126         /* COMING FROM PRIV MODE */                                          \
 127 1:      lwz     r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r11);                     \
 128         lwz     r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r11);                  \
 129         stw     r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r8);                      \
 130         stw     r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r8);                   \
 131         lwz     r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11);                      \
 132         stw     r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8);                       \
 133         mr      r11,r8;                                                      \
 134 2:      mfspr   r8,exc_level##_SPRG;                                         \
 135         stw     r12,GPR12(r11);         /* save various registers          */\
 136         mflr    r10;                                                         \
 137         stw     r10,_LINK(r11);                                              \
 138         mfspr   r12,SPRN_DEAR;          /* save DEAR and ESR in the frame  */\
 139         stw     r12,_DEAR(r11);         /* since they may have had stuff   */\
 140         mfspr   r9,SPRN_ESR;            /* in them at the point where the  */\
 141         stw     r9,_ESR(r11);           /* exception was taken             */\
 142         mfspr   r12,exc_level_srr0;                                          \
 143         stw     r1,GPR1(r11);                                                \
 144         mfspr   r9,exc_level_srr1;                                           \
 145         stw     r1,0(r11);                                                   \
 146         mr      r1,r11;                                                      \
 147         rlwinm  r9,r9,0,14,12;          /* clear MSR_WE (necessary?)       */\
 148         stw     r0,GPR0(r11);                                                \
 149         SAVE_4GPRS(3, r11);                                                  \
 150         SAVE_2GPRS(7, r11)
 151
 152 #define CRITICAL_EXCEPTION_PROLOG \
 153                 EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1)
 154 #define DEBUG_EXCEPTION_PROLOG \
 155                 EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1)
 156 #define MCHECK_EXCEPTION_PROLOG \
 157                 EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1)
 158
 159 /*
 160  * Exception vectors.
 161  */
 162 #define START_EXCEPTION(label)                                               \
 163         .align 5;                                                            \
 164 label:
 165
 166 #define FINISH_EXCEPTION(func)                                  \
 167         bl      transfer_to_handler_full;                       \
 168         .long   func;                                           \
 169         .long   ret_from_except_full
 170
 171 #define EXCEPTION(n, label, hdlr, xfer)                         \
 172         START_EXCEPTION(label);                                 \
 173         NORMAL_EXCEPTION_PROLOG;                                \
 174         addi    r3,r1,STACK_FRAME_OVERHEAD;                     \
 175         xfer(n, hdlr)
 176
 177 #define CRITICAL_EXCEPTION(n, label, hdlr)                      \
 178         START_EXCEPTION(label);                                 \
 179         CRITICAL_EXCEPTION_PROLOG;                              \
 180         addi    r3,r1,STACK_FRAME_OVERHEAD;                     \
 181         EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
 182                           NOCOPY, crit_transfer_to_handler, \
 183                           ret_from_crit_exc)
 184
 185 #define MCHECK_EXCEPTION(n, label, hdlr)                        \
 186         START_EXCEPTION(label);                                 \
 187         MCHECK_EXCEPTION_PROLOG;                                \
 188         mfspr   r5,SPRN_ESR;                                    \
 189         stw     r5,_ESR(r11);                                   \
 190         addi    r3,r1,STACK_FRAME_OVERHEAD;                     \
 191         EXC_XFER_TEMPLATE(hdlr, n+4, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
 192                           NOCOPY, mcheck_transfer_to_handler,   \
 193                           ret_from_mcheck_exc)
 194
 195 #define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret)   \
 196         li      r10,trap;                                       \
 197         stw     r10,_TRAP(r11);                                 \
 198         lis     r10,msr@h;                                      \
 199         ori     r10,r10,msr@l;                                  \
 200         copyee(r10, r9);                                        \
 201         bl      tfer;                                           \
 202         .long   hdlr;                                           \
 203         .long   ret
 204
 205 #define COPY_EE(d, s)           rlwimi d,s,0,16,16
 206 #define NOCOPY(d, s)
 207
 208 #define EXC_XFER_STD(n, hdlr)           \
 209         EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
 210                           ret_from_except_full)
 211
 212 #define EXC_XFER_LITE(n, hdlr)          \
 213         EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
 214                           ret_from_except)
 215
 216 #define EXC_XFER_EE(n, hdlr)            \
 217         EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
 218                           ret_from_except_full)
 219
 220 #define EXC_XFER_EE_LITE(n, hdlr)       \
 221         EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
 222                           ret_from_except)
 223
 224 /* Check for a single step debug exception while in an exception
 225  * handler before state has been saved.  This is to catch the case
 226  * where an instruction that we are trying to single step causes
 227  * an exception (eg ITLB/DTLB miss) and thus the first instruction of
 228  * the exception handler generates a single step debug exception.
 229  *
 230  * If we get a debug trap on the first instruction of an exception handler,
 231  * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
 232  * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
 233  * The exception handler was handling a non-critical interrupt, so it will
 234  * save (and later restore) the MSR via SPRN_CSRR1, which will still have
 235  * the MSR_DE bit set.
 236  */
 237 #define DEBUG_DEBUG_EXCEPTION                                                 \
 238         START_EXCEPTION(DebugDebug);                                          \
 239         DEBUG_EXCEPTION_PROLOG;                                               \
 240                                                                               \
 241         /*                                                                    \
 242          * If there is a single step or branch-taken exception in an          \
 243          * exception entry sequence, it was probably meant to apply to        \
 244          * the code where the exception occurred (since exception entry       \
 245          * doesn't turn off DE automatically).  We simulate the effect        \
 246          * of turning off DE on entry to an exception handler by turning      \
 247          * off DE in the DSRR1 value and clearing the debug status.           \
 248          */                                                                   \
 249         mfspr   r10,SPRN_DBSR;          /* check single-step/branch taken */  \
 250         andis.  r10,r10,DBSR_IC@h;                                            \
 251         beq+    2f;                                                           \
 252                                                                               \
 253         lis     r10,KERNELBASE@h;       /* check if exception in vectors */   \
 254         ori     r10,r10,KERNELBASE@l;                                         \
 255         cmplw   r12,r10;                                                      \
 256         blt+    2f;                     /* addr below exception vectors */    \
 257                                                                               \
 258         lis     r10,DebugDebug@h;                                             \
 259         ori     r10,r10,DebugDebug@l;                                         \
 260         cmplw   r12,r10;                                                      \
 261         bgt+    2f;                     /* addr above exception vectors */    \
 262                                                                               \
 263         /* here it looks like we got an inappropriate debug exception. */     \
 264 1:      rlwinm  r9,r9,0,~MSR_DE;        /* clear DE in the CDRR1 value */     \
 265         lis     r10,DBSR_IC@h;          /* clear the IC event */              \
 266         mtspr   SPRN_DBSR,r10;                                                \
 267         /* restore state and get out */                                       \
 268         lwz     r10,_CCR(r11);                                                \
 269         lwz     r0,GPR0(r11);                                                 \
 270         lwz     r1,GPR1(r11);                                                 \
 271         mtcrf   0x80,r10;                                                     \
 272         mtspr   SPRN_DSRR0,r12;                                               \
 273         mtspr   SPRN_DSRR1,r9;                                                \
 274         lwz     r9,GPR9(r11);                                                 \
 275         lwz     r12,GPR12(r11);                                               \
 276         mtspr   DEBUG_SPRG,r8;                                                \
 277         BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \
 278         lwz     r10,GPR10(r8);                                                \
 279         lwz     r11,GPR11(r8);                                                \
 280         mfspr   r8,DEBUG_SPRG;                                                \
 281                                                                               \
 282         RFDI;                                                                 \
 283         b       .;                                                            \
 284                                                                               \
 285         /* continue normal handling for a debug exception... */               \
 286 2:      mfspr   r4,SPRN_DBSR;                                                 \
 287         addi    r3,r1,STACK_FRAME_OVERHEAD;                                   \
 288         EXC_XFER_TEMPLATE(DebugException, 0x2008, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
 289
 290 #define DEBUG_CRIT_EXCEPTION                                                  \
 291         START_EXCEPTION(DebugCrit);                                           \
 292         CRITICAL_EXCEPTION_PROLOG;                                            \
 293                                                                               \
 294         /*                                                                    \
 295          * If there is a single step or branch-taken exception in an          \
 296          * exception entry sequence, it was probably meant to apply to        \
 297          * the code where the exception occurred (since exception entry       \
 298          * doesn't turn off DE automatically).  We simulate the effect        \
 299          * of turning off DE on entry to an exception handler by turning      \
 300          * off DE in the CSRR1 value and clearing the debug status.           \
 301          */                                                                   \
 302         mfspr   r10,SPRN_DBSR;          /* check single-step/branch taken */  \
 303         andis.  r10,r10,DBSR_IC@h;                                            \
 304         beq+    2f;                                                           \
 305                                                                               \
 306         lis     r10,KERNELBASE@h;       /* check if exception in vectors */   \
 307         ori     r10,r10,KERNELBASE@l;                                         \
 308         cmplw   r12,r10;                                                      \
 309         blt+    2f;                     /* addr below exception vectors */    \
 310                                                                               \
 311         lis     r10,DebugCrit@h;                                                      \
 312         ori     r10,r10,DebugCrit@l;                                          \
 313         cmplw   r12,r10;                                                      \
 314         bgt+    2f;                     /* addr above exception vectors */    \
 315                                                                               \
 316         /* here it looks like we got an inappropriate debug exception. */     \
 317 1:      rlwinm  r9,r9,0,~MSR_DE;        /* clear DE in the CSRR1 value */     \
 318         lis     r10,DBSR_IC@h;          /* clear the IC event */              \
 319         mtspr   SPRN_DBSR,r10;                                                \
 320         /* restore state and get out */                                       \
 321         lwz     r10,_CCR(r11);                                                \
 322         lwz     r0,GPR0(r11);                                                 \
 323         lwz     r1,GPR1(r11);                                                 \
 324         mtcrf   0x80,r10;                                                     \
 325         mtspr   SPRN_CSRR0,r12;                                               \
 326         mtspr   SPRN_CSRR1,r9;                                                \
 327         lwz     r9,GPR9(r11);                                                 \
 328         lwz     r12,GPR12(r11);                                               \
 329         mtspr   CRIT_SPRG,r8;                                                 \
 330         BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */  \
 331         lwz     r10,GPR10(r8);                                                \
 332         lwz     r11,GPR11(r8);                                                \
 333         mfspr   r8,CRIT_SPRG;                                                 \
 334                                                                               \
 335         rfci;                                                                 \
 336         b       .;                                                            \
 337                                                                               \
 338         /* continue normal handling for a critical exception... */            \
 339 2:      mfspr   r4,SPRN_DBSR;                                                 \
 340         addi    r3,r1,STACK_FRAME_OVERHEAD;                                   \
 341         EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
 342
 343 #define DATA_STORAGE_EXCEPTION                                                \
 344         START_EXCEPTION(DataStorage)                                          \
 345         NORMAL_EXCEPTION_PROLOG;                                              \
 346         mfspr   r5,SPRN_ESR;            /* Grab the ESR and save it */        \
 347         stw     r5,_ESR(r11);                                                 \
 348         mfspr   r4,SPRN_DEAR;           /* Grab the DEAR */                   \
 349         EXC_XFER_EE_LITE(0x0300, handle_page_fault)
 350
 351 #define INSTRUCTION_STORAGE_EXCEPTION                                         \
 352         START_EXCEPTION(InstructionStorage)                                   \
 353         NORMAL_EXCEPTION_PROLOG;                                              \
 354         mfspr   r5,SPRN_ESR;            /* Grab the ESR and save it */        \
 355         stw     r5,_ESR(r11);                                                 \
 356         mr      r4,r12;                 /* Pass SRR0 as arg2 */               \
 357         li      r5,0;                   /* Pass zero as arg3 */               \
 358         EXC_XFER_EE_LITE(0x0400, handle_page_fault)
 359
 360 #define ALIGNMENT_EXCEPTION                                                   \
 361         START_EXCEPTION(Alignment)                                            \
 362         NORMAL_EXCEPTION_PROLOG;                                              \
 363         mfspr   r4,SPRN_DEAR;           /* Grab the DEAR and save it */       \
 364         stw     r4,_DEAR(r11);                                                \
 365         addi    r3,r1,STACK_FRAME_OVERHEAD;                                   \
 366         EXC_XFER_EE(0x0600, alignment_exception)
 367
 368 #define PROGRAM_EXCEPTION                                                     \
 369         START_EXCEPTION(Program)                                              \
 370         NORMAL_EXCEPTION_PROLOG;                                              \
 371         mfspr   r4,SPRN_ESR;            /* Grab the ESR and save it */        \
 372         stw     r4,_ESR(r11);                                                 \
 373         addi    r3,r1,STACK_FRAME_OVERHEAD;                                   \
 374         EXC_XFER_STD(0x0700, program_check_exception)
 375
 376 #define DECREMENTER_EXCEPTION                                                 \
 377         START_EXCEPTION(Decrementer)                                          \
 378         NORMAL_EXCEPTION_PROLOG;                                              \
 379         lis     r0,TSR_DIS@h;           /* Setup the DEC interrupt mask */    \
 380         mtspr   SPRN_TSR,r0;            /* Clear the DEC interrupt */         \
 381         addi    r3,r1,STACK_FRAME_OVERHEAD;                                   \
 382         EXC_XFER_LITE(0x0900, timer_interrupt)
 383
 384 #define FP_UNAVAILABLE_EXCEPTION                                              \
 385         START_EXCEPTION(FloatingPointUnavailable)                             \
 386         NORMAL_EXCEPTION_PROLOG;                                              \
 387         beq     1f;                                                           \
 388         bl      load_up_fpu;            /* if from user, just load it up */   \
 389         b       fast_exception_return;                                        \
 390 1:      addi    r3,r1,STACK_FRAME_OVERHEAD;                                   \
 391         EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
 392
 393 #ifndef __ASSEMBLY__
 394 struct exception_regs {
 395         unsigned long mas0;
 396         unsigned long mas1;
 397         unsigned long mas2;
 398         unsigned long mas3;
 399         unsigned long mas6;
 400         unsigned long mas7;
 401         unsigned long srr0;
 402         unsigned long srr1;
 403         unsigned long csrr0;
 404         unsigned long csrr1;
 405         unsigned long dsrr0;
 406         unsigned long dsrr1;
 407         unsigned long saved_ksp_limit;
 408 };
 409
 410 /* ensure this structure is always sized to a multiple of the stack alignment */
 411 #define STACK_EXC_LVL_FRAME_SIZE        _ALIGN_UP(sizeof (struct exception_regs), 16)
 412
 413 #endif /* __ASSEMBLY__ */
 414 #endif /* __HEAD_BOOKE_H__ */