git.oblomov.eu Git - linux-2.6/blob - drivers/input/keyboard/hil_kbd.c

   1 /*
   2  * Generic linux-input device driver for keyboard devices
   3  *
   4  * Copyright (c) 2001 Brian S. Julin
   5  * All rights reserved.
   6  *
   7  * Redistribution and use in source and binary forms, with or without
   8  * modification, are permitted provided that the following conditions
   9  * are met:
  10  * 1. Redistributions of source code must retain the above copyright
  11  *    notice, this list of conditions, and the following disclaimer,
  12  *    without modification.
  13  * 2. The name of the author may not be used to endorse or promote products
  14  *    derived from this software without specific prior written permission.
  15  *
  16  * Alternatively, this software may be distributed under the terms of the
  17  * GNU General Public License ("GPL").
  18  *
  19  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  22  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
  23  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  28  *
  29  * References:
  30  * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
  31  *
  32  */
  33
  34 #include <linux/hil.h>
  35 #include <linux/input.h>
  36 #include <linux/serio.h>
  37 #include <linux/kernel.h>
  38 #include <linux/module.h>
  39 #include <linux/init.h>
  40 #include <linux/slab.h>
  41 #include <linux/pci_ids.h>
  42
  43 #define PREFIX "HIL KEYB: "
  44 #define HIL_GENERIC_NAME "HIL keyboard"
  45
  46 MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
  47 MODULE_DESCRIPTION(HIL_GENERIC_NAME " driver");
  48 MODULE_LICENSE("Dual BSD/GPL");
  49
  50 #define HIL_KBD_MAX_LENGTH 16
  51
  52 #define HIL_KBD_SET1_UPBIT 0x01
  53 #define HIL_KBD_SET1_SHIFT 1
  54 static unsigned int hil_kbd_set1[HIL_KEYCODES_SET1_TBLSIZE] =
  55         { HIL_KEYCODES_SET1 };
  56
  57 #define HIL_KBD_SET2_UPBIT 0x01
  58 #define HIL_KBD_SET2_SHIFT 1
  59 /* Set2 is user defined */
  60
  61 #define HIL_KBD_SET3_UPBIT 0x80
  62 #define HIL_KBD_SET3_SHIFT 0
  63 static unsigned int hil_kbd_set3[HIL_KEYCODES_SET3_TBLSIZE] =
  64         { HIL_KEYCODES_SET3 };
  65
  66 static char hil_language[][16] = { HIL_LOCALE_MAP };
  67
  68 struct hil_kbd {
  69         struct input_dev dev;
  70         struct serio *serio;
  71
  72         /* Input buffer and index for packets from HIL bus. */
  73         hil_packet data[HIL_KBD_MAX_LENGTH];
  74         int idx4; /* four counts per packet */
  75
  76         /* Raw device info records from HIL bus, see hil.h for fields. */
  77         char    idd[HIL_KBD_MAX_LENGTH];        /* DID byte and IDD record */
  78         char    rsc[HIL_KBD_MAX_LENGTH];        /* RSC record */
  79         char    exd[HIL_KBD_MAX_LENGTH];        /* EXD record */
  80         char    rnm[HIL_KBD_MAX_LENGTH + 1];    /* RNM record + NULL term. */
  81
  82         /* Something to sleep around with. */
  83         struct semaphore sem;
  84 };
  85
  86 /* Process a complete packet after transfer from the HIL */
  87 static void hil_kbd_process_record(struct hil_kbd *kbd)
  88 {
  89         struct input_dev *dev = &kbd->dev;
  90         hil_packet *data = kbd->data;
  91         hil_packet p;
  92         int idx, i, cnt;
  93
  94         idx = kbd->idx4/4;
  95         p = data[idx - 1];
  96
  97         if ((p & ~HIL_CMDCT_POL) ==
  98             (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL)) goto report;
  99         if ((p & ~HIL_CMDCT_RPL) ==
 100             (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_RPL)) goto report;
 101
 102         /* Not a poll response.  See if we are loading config records. */
 103         switch (p & HIL_PKT_DATA_MASK) {
 104         case HIL_CMD_IDD:
 105                 for (i = 0; i < idx; i++)
 106                         kbd->idd[i] = kbd->data[i] & HIL_PKT_DATA_MASK;
 107                 for (; i < HIL_KBD_MAX_LENGTH; i++)
 108                         kbd->idd[i] = 0;
 109                 break;
 110         case HIL_CMD_RSC:
 111                 for (i = 0; i < idx; i++)
 112                         kbd->rsc[i] = kbd->data[i] & HIL_PKT_DATA_MASK;
 113                 for (; i < HIL_KBD_MAX_LENGTH; i++)
 114                         kbd->rsc[i] = 0;
 115                 break;
 116         case HIL_CMD_EXD:
 117                 for (i = 0; i < idx; i++)
 118                         kbd->exd[i] = kbd->data[i] & HIL_PKT_DATA_MASK;
 119                 for (; i < HIL_KBD_MAX_LENGTH; i++)
 120                         kbd->exd[i] = 0;
 121                 break;
 122         case HIL_CMD_RNM:
 123                 for (i = 0; i < idx; i++)
 124                         kbd->rnm[i] = kbd->data[i] & HIL_PKT_DATA_MASK;
 125                 for (; i < HIL_KBD_MAX_LENGTH + 1; i++)
 126                         kbd->rnm[i] = '\0';
 127                 break;
 128         default:
 129                 /* These occur when device isn't present */
 130                 if (p == (HIL_ERR_INT | HIL_PKT_CMD)) break;
 131                 /* Anything else we'd like to know about. */
 132                 printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p);
 133                 break;
 134         }
 135         goto out;
 136
 137  report:
 138         cnt = 1;
 139         switch (kbd->data[0] & HIL_POL_CHARTYPE_MASK) {
 140         case HIL_POL_CHARTYPE_NONE:
 141                 break;
 142         case HIL_POL_CHARTYPE_ASCII:
 143                 while (cnt < idx - 1)
 144                         input_report_key(dev, kbd->data[cnt++] & 0x7f, 1);
 145                 break;
 146         case HIL_POL_CHARTYPE_RSVD1:
 147         case HIL_POL_CHARTYPE_RSVD2:
 148         case HIL_POL_CHARTYPE_BINARY:
 149                 while (cnt < idx - 1)
 150                         input_report_key(dev, kbd->data[cnt++], 1);
 151                 break;
 152         case HIL_POL_CHARTYPE_SET1:
 153                 while (cnt < idx - 1) {
 154                         unsigned int key;
 155                         int up;
 156                         key = kbd->data[cnt++];
 157                         up = key & HIL_KBD_SET1_UPBIT;
 158                         key &= (~HIL_KBD_SET1_UPBIT & 0xff);
 159                         key = hil_kbd_set1[key >> HIL_KBD_SET1_SHIFT];
 160                         if (key != KEY_RESERVED)
 161                                 input_report_key(dev, key, !up);
 162                 }
 163                 break;
 164         case HIL_POL_CHARTYPE_SET2:
 165                 while (cnt < idx - 1) {
 166                         unsigned int key;
 167                         int up;
 168                         key = kbd->data[cnt++];
 169                         up = key & HIL_KBD_SET2_UPBIT;
 170                         key &= (~HIL_KBD_SET1_UPBIT & 0xff);
 171                         key = key >> HIL_KBD_SET2_SHIFT;
 172                         if (key != KEY_RESERVED)
 173                                 input_report_key(dev, key, !up);
 174                 }
 175                 break;
 176         case HIL_POL_CHARTYPE_SET3:
 177                 while (cnt < idx - 1) {
 178                         unsigned int key;
 179                         int up;
 180                         key = kbd->data[cnt++];
 181                         up = key & HIL_KBD_SET3_UPBIT;
 182                         key &= (~HIL_KBD_SET1_UPBIT & 0xff);
 183                         key = hil_kbd_set3[key >> HIL_KBD_SET3_SHIFT];
 184                         if (key != KEY_RESERVED)
 185                                 input_report_key(dev, key, !up);
 186                 }
 187                 break;
 188         }
 189  out:
 190         kbd->idx4 = 0;
 191         up(&kbd->sem);
 192 }
 193
 194 static void hil_kbd_process_err(struct hil_kbd *kbd) {
 195         printk(KERN_WARNING PREFIX "errored HIL packet\n");
 196         kbd->idx4 = 0;
 197         up(&kbd->sem);
 198 }
 199
 200 static irqreturn_t hil_kbd_interrupt(struct serio *serio,
 201               unsigned char data, unsigned int flags, struct pt_regs *regs)
 202 {
 203         struct hil_kbd *kbd;
 204         hil_packet packet;
 205         int idx;
 206
 207         kbd = (struct hil_kbd *)serio->private;
 208         if (kbd == NULL) {
 209                 BUG();
 210                 return IRQ_HANDLED;
 211         }
 212
 213         if (kbd->idx4 >= (HIL_KBD_MAX_LENGTH * sizeof(hil_packet))) {
 214                 hil_kbd_process_err(kbd);
 215                 return IRQ_HANDLED;
 216         }
 217         idx = kbd->idx4/4;
 218         if (!(kbd->idx4 % 4)) kbd->data[idx] = 0;
 219         packet = kbd->data[idx];
 220         packet |= ((hil_packet)data) << ((3 - (kbd->idx4 % 4)) * 8);
 221         kbd->data[idx] = packet;
 222
 223         /* Records of N 4-byte hil_packets must terminate with a command. */
 224         if ((++(kbd->idx4)) % 4) return IRQ_HANDLED;
 225         if ((packet & 0xffff0000) != HIL_ERR_INT) {
 226                 hil_kbd_process_err(kbd);
 227                 return IRQ_HANDLED;
 228         }
 229         if (packet & HIL_PKT_CMD) hil_kbd_process_record(kbd);
 230         return IRQ_HANDLED;
 231 }
 232
 233 static void hil_kbd_disconnect(struct serio *serio)
 234 {
 235         struct hil_kbd *kbd;
 236
 237         kbd = (struct hil_kbd *)serio->private;
 238         if (kbd == NULL) {
 239                 BUG();
 240                 return;
 241         }
 242
 243         input_unregister_device(&kbd->dev);
 244         serio_close(serio);
 245         kfree(kbd);
 246 }
 247
 248 static void hil_kbd_connect(struct serio *serio, struct serio_driver *drv)
 249 {
 250         struct hil_kbd  *kbd;
 251         uint8_t         did, *idd;
 252         int             i;
 253
 254         if (serio->type != (SERIO_HIL_MLC | SERIO_HIL)) return;
 255
 256         if (!(kbd = kmalloc(sizeof(struct hil_kbd), GFP_KERNEL))) return;
 257         memset(kbd, 0, sizeof(struct hil_kbd));
 258
 259         if (serio_open(serio, drv)) goto bail0;
 260
 261         serio->private = kbd;
 262         kbd->serio = serio;
 263         kbd->dev.private = kbd;
 264
 265         init_MUTEX_LOCKED(&(kbd->sem));
 266
 267         /* Get device info.  MLC driver supplies devid/status/etc. */
 268         serio->write(serio, 0);
 269         serio->write(serio, 0);
 270         serio->write(serio, HIL_PKT_CMD >> 8);
 271         serio->write(serio, HIL_CMD_IDD);
 272         down(&(kbd->sem));
 273
 274         serio->write(serio, 0);
 275         serio->write(serio, 0);
 276         serio->write(serio, HIL_PKT_CMD >> 8);
 277         serio->write(serio, HIL_CMD_RSC);
 278         down(&(kbd->sem));
 279
 280         serio->write(serio, 0);
 281         serio->write(serio, 0);
 282         serio->write(serio, HIL_PKT_CMD >> 8);
 283         serio->write(serio, HIL_CMD_RNM);
 284         down(&(kbd->sem));
 285
 286         serio->write(serio, 0);
 287         serio->write(serio, 0);
 288         serio->write(serio, HIL_PKT_CMD >> 8);
 289         serio->write(serio, HIL_CMD_EXD);
 290         down(&(kbd->sem));
 291
 292         up(&(kbd->sem));
 293
 294         did = kbd->idd[0];
 295         idd = kbd->idd + 1;
 296         switch (did & HIL_IDD_DID_TYPE_MASK) {
 297         case HIL_IDD_DID_TYPE_KB_INTEGRAL:
 298         case HIL_IDD_DID_TYPE_KB_ITF:
 299         case HIL_IDD_DID_TYPE_KB_RSVD:
 300         case HIL_IDD_DID_TYPE_CHAR:
 301                 printk(KERN_INFO PREFIX "HIL keyboard found (did = 0x%02x, lang = %s)\n",
 302                         did, hil_language[did & HIL_IDD_DID_TYPE_KB_LANG_MASK]);
 303                 break;
 304         default:
 305                 goto bail1;
 306         }
 307
 308         if(HIL_IDD_NUM_BUTTONS(idd) || HIL_IDD_NUM_AXES_PER_SET(*idd)) {
 309                 printk(KERN_INFO PREFIX "keyboards only, no combo devices supported.\n");
 310                 goto bail1;
 311         }
 312
 313
 314         kbd->dev.evbit[0]       = BIT(EV_KEY) | BIT(EV_REP);
 315         kbd->dev.ledbit[0]      = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
 316         kbd->dev.keycodemax     = HIL_KEYCODES_SET1_TBLSIZE;
 317         kbd->dev.keycodesize    = sizeof(hil_kbd_set1[0]);
 318         kbd->dev.keycode        = hil_kbd_set1;
 319         kbd->dev.name           = strlen(kbd->rnm) ? kbd->rnm : HIL_GENERIC_NAME;
 320         kbd->dev.phys           = "hpkbd/input0";       /* XXX */
 321
 322         kbd->dev.id.bustype     = BUS_HIL;
 323         kbd->dev.id.vendor      = PCI_VENDOR_ID_HP;
 324         kbd->dev.id.product     = 0x0001; /* TODO: get from kbd->rsc */
 325         kbd->dev.id.version     = 0x0100; /* TODO: get from kbd->rsc */
 326         kbd->dev.dev            = &serio->dev;
 327
 328         for (i = 0; i < 128; i++) {
 329                 set_bit(hil_kbd_set1[i], kbd->dev.keybit);
 330                 set_bit(hil_kbd_set3[i], kbd->dev.keybit);
 331         }
 332         clear_bit(0, kbd->dev.keybit);
 333
 334         input_register_device(&kbd->dev);
 335         printk(KERN_INFO "input: %s, ID: %d\n",
 336                 kbd->dev.name, did);
 337
 338         serio->write(serio, 0);
 339         serio->write(serio, 0);
 340         serio->write(serio, HIL_PKT_CMD >> 8);
 341         serio->write(serio, HIL_CMD_EK1); /* Enable Keyswitch Autorepeat 1 */
 342         down(&(kbd->sem));
 343         up(&(kbd->sem));
 344
 345         return;
 346  bail1:
 347         serio_close(serio);
 348  bail0:
 349         kfree(kbd);
 350 }
 351
 352
 353 struct serio_driver hil_kbd_serio_drv = {
 354         .driver         = {
 355                 .name   = "hil_kbd",
 356         },
 357         .description    = "HP HIL keyboard driver",
 358         .connect        = hil_kbd_connect,
 359         .disconnect     = hil_kbd_disconnect,
 360         .interrupt      = hil_kbd_interrupt
 361 };
 362
 363 static int __init hil_kbd_init(void)
 364 {
 365         serio_register_driver(&hil_kbd_serio_drv);
 366         return 0;
 367 }
 368
 369 static void __exit hil_kbd_exit(void)
 370 {
 371         serio_unregister_driver(&hil_kbd_serio_drv);
 372 }
 373
 374 module_init(hil_kbd_init);
 375 module_exit(hil_kbd_exit);