Merge branch 'sched/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip...
[linux-2.6] / drivers / mmc / host / au1xmmc.c
1 /*
2  * linux/drivers/mmc/host/au1xmmc.c - AU1XX0 MMC driver
3  *
4  *  Copyright (c) 2005, Advanced Micro Devices, Inc.
5  *
6  *  Developed with help from the 2.4.30 MMC AU1XXX controller including
7  *  the following copyright notices:
8  *     Copyright (c) 2003-2004 Embedded Edge, LLC.
9  *     Portions Copyright (C) 2002 Embedix, Inc
10  *     Copyright 2002 Hewlett-Packard Company
11
12  *  2.6 version of this driver inspired by:
13  *     (drivers/mmc/wbsd.c) Copyright (C) 2004-2005 Pierre Ossman,
14  *     All Rights Reserved.
15  *     (drivers/mmc/pxa.c) Copyright (C) 2003 Russell King,
16  *     All Rights Reserved.
17  *
18
19  * This program is free software; you can redistribute it and/or modify
20  * it under the terms of the GNU General Public License version 2 as
21  * published by the Free Software Foundation.
22  */
23
24 /* Why don't we use the SD controllers' carddetect feature?
25  *
26  * From the AU1100 MMC application guide:
27  * If the Au1100-based design is intended to support both MultiMediaCards
28  * and 1- or 4-data bit SecureDigital cards, then the solution is to
29  * connect a weak (560KOhm) pull-up resistor to connector pin 1.
30  * In doing so, a MMC card never enters SPI-mode communications,
31  * but now the SecureDigital card-detect feature of CD/DAT3 is ineffective
32  * (the low to high transition will not occur).
33  */
34
35 #include <linux/module.h>
36 #include <linux/init.h>
37 #include <linux/platform_device.h>
38 #include <linux/mm.h>
39 #include <linux/interrupt.h>
40 #include <linux/dma-mapping.h>
41 #include <linux/scatterlist.h>
42 #include <linux/leds.h>
43 #include <linux/mmc/host.h>
44
45 #include <asm/io.h>
46 #include <asm/mach-au1x00/au1000.h>
47 #include <asm/mach-au1x00/au1xxx_dbdma.h>
48 #include <asm/mach-au1x00/au1100_mmc.h>
49
50 #define DRIVER_NAME "au1xxx-mmc"
51
52 /* Set this to enable special debugging macros */
53 /* #define DEBUG */
54
55 #ifdef DEBUG
56 #define DBG(fmt, idx, args...)  \
57         printk(KERN_DEBUG "au1xmmc(%d): DEBUG: " fmt, idx, ##args)
58 #else
59 #define DBG(fmt, idx, args...) do {} while (0)
60 #endif
61
62 /* Hardware definitions */
63 #define AU1XMMC_DESCRIPTOR_COUNT 1
64 #define AU1XMMC_DESCRIPTOR_SIZE  2048
65
66 #define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
67                      MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
68                      MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36)
69
70 /* This gives us a hard value for the stop command that we can write directly
71  * to the command register.
72  */
73 #define STOP_CMD        \
74         (SD_CMD_RT_1B | SD_CMD_CT_7 | (0xC << SD_CMD_CI_SHIFT) | SD_CMD_GO)
75
76 /* This is the set of interrupts that we configure by default. */
77 #define AU1XMMC_INTERRUPTS                              \
78         (SD_CONFIG_SC | SD_CONFIG_DT | SD_CONFIG_RAT |  \
79          SD_CONFIG_CR | SD_CONFIG_I)
80
81 /* The poll event (looking for insert/remove events runs twice a second. */
82 #define AU1XMMC_DETECT_TIMEOUT (HZ/2)
83
84 struct au1xmmc_host {
85         struct mmc_host *mmc;
86         struct mmc_request *mrq;
87
88         u32 flags;
89         u32 iobase;
90         u32 clock;
91         u32 bus_width;
92         u32 power_mode;
93
94         int status;
95
96         struct {
97                 int len;
98                 int dir;
99         } dma;
100
101         struct {
102                 int index;
103                 int offset;
104                 int len;
105         } pio;
106
107         u32 tx_chan;
108         u32 rx_chan;
109
110         int irq;
111
112         struct tasklet_struct finish_task;
113         struct tasklet_struct data_task;
114         struct au1xmmc_platform_data *platdata;
115         struct platform_device *pdev;
116         struct resource *ioarea;
117 };
118
119 /* Status flags used by the host structure */
120 #define HOST_F_XMIT     0x0001
121 #define HOST_F_RECV     0x0002
122 #define HOST_F_DMA      0x0010
123 #define HOST_F_ACTIVE   0x0100
124 #define HOST_F_STOP     0x1000
125
126 #define HOST_S_IDLE     0x0001
127 #define HOST_S_CMD      0x0002
128 #define HOST_S_DATA     0x0003
129 #define HOST_S_STOP     0x0004
130
131 /* Easy access macros */
132 #define HOST_STATUS(h)  ((h)->iobase + SD_STATUS)
133 #define HOST_CONFIG(h)  ((h)->iobase + SD_CONFIG)
134 #define HOST_ENABLE(h)  ((h)->iobase + SD_ENABLE)
135 #define HOST_TXPORT(h)  ((h)->iobase + SD_TXPORT)
136 #define HOST_RXPORT(h)  ((h)->iobase + SD_RXPORT)
137 #define HOST_CMDARG(h)  ((h)->iobase + SD_CMDARG)
138 #define HOST_BLKSIZE(h) ((h)->iobase + SD_BLKSIZE)
139 #define HOST_CMD(h)     ((h)->iobase + SD_CMD)
140 #define HOST_CONFIG2(h) ((h)->iobase + SD_CONFIG2)
141 #define HOST_TIMEOUT(h) ((h)->iobase + SD_TIMEOUT)
142 #define HOST_DEBUG(h)   ((h)->iobase + SD_DEBUG)
143
144 #define DMA_CHANNEL(h)  \
145         (((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan)
146
147 static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask)
148 {
149         u32 val = au_readl(HOST_CONFIG(host));
150         val |= mask;
151         au_writel(val, HOST_CONFIG(host));
152         au_sync();
153 }
154
155 static inline void FLUSH_FIFO(struct au1xmmc_host *host)
156 {
157         u32 val = au_readl(HOST_CONFIG2(host));
158
159         au_writel(val | SD_CONFIG2_FF, HOST_CONFIG2(host));
160         au_sync_delay(1);
161
162         /* SEND_STOP will turn off clock control - this re-enables it */
163         val &= ~SD_CONFIG2_DF;
164
165         au_writel(val, HOST_CONFIG2(host));
166         au_sync();
167 }
168
169 static inline void IRQ_OFF(struct au1xmmc_host *host, u32 mask)
170 {
171         u32 val = au_readl(HOST_CONFIG(host));
172         val &= ~mask;
173         au_writel(val, HOST_CONFIG(host));
174         au_sync();
175 }
176
177 static inline void SEND_STOP(struct au1xmmc_host *host)
178 {
179         u32 config2;
180
181         WARN_ON(host->status != HOST_S_DATA);
182         host->status = HOST_S_STOP;
183
184         config2 = au_readl(HOST_CONFIG2(host));
185         au_writel(config2 | SD_CONFIG2_DF, HOST_CONFIG2(host));
186         au_sync();
187
188         /* Send the stop commmand */
189         au_writel(STOP_CMD, HOST_CMD(host));
190 }
191
192 static void au1xmmc_set_power(struct au1xmmc_host *host, int state)
193 {
194         if (host->platdata && host->platdata->set_power)
195                 host->platdata->set_power(host->mmc, state);
196 }
197
198 static int au1xmmc_card_inserted(struct mmc_host *mmc)
199 {
200         struct au1xmmc_host *host = mmc_priv(mmc);
201
202         if (host->platdata && host->platdata->card_inserted)
203                 return !!host->platdata->card_inserted(host->mmc);
204
205         return -ENOSYS;
206 }
207
208 static int au1xmmc_card_readonly(struct mmc_host *mmc)
209 {
210         struct au1xmmc_host *host = mmc_priv(mmc);
211
212         if (host->platdata && host->platdata->card_readonly)
213                 return !!host->platdata->card_readonly(mmc);
214
215         return -ENOSYS;
216 }
217
218 static void au1xmmc_finish_request(struct au1xmmc_host *host)
219 {
220         struct mmc_request *mrq = host->mrq;
221
222         host->mrq = NULL;
223         host->flags &= HOST_F_ACTIVE | HOST_F_DMA;
224
225         host->dma.len = 0;
226         host->dma.dir = 0;
227
228         host->pio.index  = 0;
229         host->pio.offset = 0;
230         host->pio.len = 0;
231
232         host->status = HOST_S_IDLE;
233
234         mmc_request_done(host->mmc, mrq);
235 }
236
237 static void au1xmmc_tasklet_finish(unsigned long param)
238 {
239         struct au1xmmc_host *host = (struct au1xmmc_host *) param;
240         au1xmmc_finish_request(host);
241 }
242
243 static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
244                                 struct mmc_command *cmd, struct mmc_data *data)
245 {
246         u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
247
248         switch (mmc_resp_type(cmd)) {
249         case MMC_RSP_NONE:
250                 break;
251         case MMC_RSP_R1:
252                 mmccmd |= SD_CMD_RT_1;
253                 break;
254         case MMC_RSP_R1B:
255                 mmccmd |= SD_CMD_RT_1B;
256                 break;
257         case MMC_RSP_R2:
258                 mmccmd |= SD_CMD_RT_2;
259                 break;
260         case MMC_RSP_R3:
261                 mmccmd |= SD_CMD_RT_3;
262                 break;
263         default:
264                 printk(KERN_INFO "au1xmmc: unhandled response type %02x\n",
265                         mmc_resp_type(cmd));
266                 return -EINVAL;
267         }
268
269         if (data) {
270                 if (data->flags & MMC_DATA_READ) {
271                         if (data->blocks > 1)
272                                 mmccmd |= SD_CMD_CT_4;
273                         else
274                                 mmccmd |= SD_CMD_CT_2;
275                 } else if (data->flags & MMC_DATA_WRITE) {
276                         if (data->blocks > 1)
277                                 mmccmd |= SD_CMD_CT_3;
278                         else
279                                 mmccmd |= SD_CMD_CT_1;
280                 }
281         }
282
283         au_writel(cmd->arg, HOST_CMDARG(host));
284         au_sync();
285
286         if (wait)
287                 IRQ_OFF(host, SD_CONFIG_CR);
288
289         au_writel((mmccmd | SD_CMD_GO), HOST_CMD(host));
290         au_sync();
291
292         /* Wait for the command to go on the line */
293         while (au_readl(HOST_CMD(host)) & SD_CMD_GO)
294                 /* nop */;
295
296         /* Wait for the command to come back */
297         if (wait) {
298                 u32 status = au_readl(HOST_STATUS(host));
299
300                 while (!(status & SD_STATUS_CR))
301                         status = au_readl(HOST_STATUS(host));
302
303                 /* Clear the CR status */
304                 au_writel(SD_STATUS_CR, HOST_STATUS(host));
305
306                 IRQ_ON(host, SD_CONFIG_CR);
307         }
308
309         return 0;
310 }
311
312 static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
313 {
314         struct mmc_request *mrq = host->mrq;
315         struct mmc_data *data;
316         u32 crc;
317
318         WARN_ON((host->status != HOST_S_DATA) && (host->status != HOST_S_STOP));
319
320         if (host->mrq == NULL)
321                 return;
322
323         data = mrq->cmd->data;
324
325         if (status == 0)
326                 status = au_readl(HOST_STATUS(host));
327
328         /* The transaction is really over when the SD_STATUS_DB bit is clear */
329         while ((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB))
330                 status = au_readl(HOST_STATUS(host));
331
332         data->error = 0;
333         dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma.dir);
334
335         /* Process any errors */
336         crc = (status & (SD_STATUS_WC | SD_STATUS_RC));
337         if (host->flags & HOST_F_XMIT)
338                 crc |= ((status & 0x07) == 0x02) ? 0 : 1;
339
340         if (crc)
341                 data->error = -EILSEQ;
342
343         /* Clear the CRC bits */
344         au_writel(SD_STATUS_WC | SD_STATUS_RC, HOST_STATUS(host));
345
346         data->bytes_xfered = 0;
347
348         if (!data->error) {
349                 if (host->flags & HOST_F_DMA) {
350 #ifdef CONFIG_SOC_AU1200        /* DBDMA */
351                         u32 chan = DMA_CHANNEL(host);
352
353                         chan_tab_t *c = *((chan_tab_t **)chan);
354                         au1x_dma_chan_t *cp = c->chan_ptr;
355                         data->bytes_xfered = cp->ddma_bytecnt;
356 #endif
357                 } else
358                         data->bytes_xfered =
359                                 (data->blocks * data->blksz) - host->pio.len;
360         }
361
362         au1xmmc_finish_request(host);
363 }
364
365 static void au1xmmc_tasklet_data(unsigned long param)
366 {
367         struct au1xmmc_host *host = (struct au1xmmc_host *)param;
368
369         u32 status = au_readl(HOST_STATUS(host));
370         au1xmmc_data_complete(host, status);
371 }
372
373 #define AU1XMMC_MAX_TRANSFER 8
374
375 static void au1xmmc_send_pio(struct au1xmmc_host *host)
376 {
377         struct mmc_data *data;
378         int sg_len, max, count;
379         unsigned char *sg_ptr, val;
380         u32 status;
381         struct scatterlist *sg;
382
383         data = host->mrq->data;
384
385         if (!(host->flags & HOST_F_XMIT))
386                 return;
387
388         /* This is the pointer to the data buffer */
389         sg = &data->sg[host->pio.index];
390         sg_ptr = sg_virt(sg) + host->pio.offset;
391
392         /* This is the space left inside the buffer */
393         sg_len = data->sg[host->pio.index].length - host->pio.offset;
394
395         /* Check if we need less than the size of the sg_buffer */
396         max = (sg_len > host->pio.len) ? host->pio.len : sg_len;
397         if (max > AU1XMMC_MAX_TRANSFER)
398                 max = AU1XMMC_MAX_TRANSFER;
399
400         for (count = 0; count < max; count++) {
401                 status = au_readl(HOST_STATUS(host));
402
403                 if (!(status & SD_STATUS_TH))
404                         break;
405
406                 val = *sg_ptr++;
407
408                 au_writel((unsigned long)val, HOST_TXPORT(host));
409                 au_sync();
410         }
411
412         host->pio.len -= count;
413         host->pio.offset += count;
414
415         if (count == sg_len) {
416                 host->pio.index++;
417                 host->pio.offset = 0;
418         }
419
420         if (host->pio.len == 0) {
421                 IRQ_OFF(host, SD_CONFIG_TH);
422
423                 if (host->flags & HOST_F_STOP)
424                         SEND_STOP(host);
425
426                 tasklet_schedule(&host->data_task);
427         }
428 }
429
430 static void au1xmmc_receive_pio(struct au1xmmc_host *host)
431 {
432         struct mmc_data *data;
433         int max, count, sg_len = 0;
434         unsigned char *sg_ptr = NULL;
435         u32 status, val;
436         struct scatterlist *sg;
437
438         data = host->mrq->data;
439
440         if (!(host->flags & HOST_F_RECV))
441                 return;
442
443         max = host->pio.len;
444
445         if (host->pio.index < host->dma.len) {
446                 sg = &data->sg[host->pio.index];
447                 sg_ptr = sg_virt(sg) + host->pio.offset;
448
449                 /* This is the space left inside the buffer */
450                 sg_len = sg_dma_len(&data->sg[host->pio.index]) - host->pio.offset;
451
452                 /* Check if we need less than the size of the sg_buffer */
453                 if (sg_len < max)
454                         max = sg_len;
455         }
456
457         if (max > AU1XMMC_MAX_TRANSFER)
458                 max = AU1XMMC_MAX_TRANSFER;
459
460         for (count = 0; count < max; count++) {
461                 status = au_readl(HOST_STATUS(host));
462
463                 if (!(status & SD_STATUS_NE))
464                         break;
465
466                 if (status & SD_STATUS_RC) {
467                         DBG("RX CRC Error [%d + %d].\n", host->pdev->id,
468                                         host->pio.len, count);
469                         break;
470                 }
471
472                 if (status & SD_STATUS_RO) {
473                         DBG("RX Overrun [%d + %d]\n", host->pdev->id,
474                                         host->pio.len, count);
475                         break;
476                 }
477                 else if (status & SD_STATUS_RU) {
478                         DBG("RX Underrun [%d + %d]\n", host->pdev->id,
479                                         host->pio.len,  count);
480                         break;
481                 }
482
483                 val = au_readl(HOST_RXPORT(host));
484
485                 if (sg_ptr)
486                         *sg_ptr++ = (unsigned char)(val & 0xFF);
487         }
488
489         host->pio.len -= count;
490         host->pio.offset += count;
491
492         if (sg_len && count == sg_len) {
493                 host->pio.index++;
494                 host->pio.offset = 0;
495         }
496
497         if (host->pio.len == 0) {
498                 /* IRQ_OFF(host, SD_CONFIG_RA | SD_CONFIG_RF); */
499                 IRQ_OFF(host, SD_CONFIG_NE);
500
501                 if (host->flags & HOST_F_STOP)
502                         SEND_STOP(host);
503
504                 tasklet_schedule(&host->data_task);
505         }
506 }
507
508 /* This is called when a command has been completed - grab the response
509  * and check for errors.  Then start the data transfer if it is indicated.
510  */
511 static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
512 {
513         struct mmc_request *mrq = host->mrq;
514         struct mmc_command *cmd;
515         u32 r[4];
516         int i, trans;
517
518         if (!host->mrq)
519                 return;
520
521         cmd = mrq->cmd;
522         cmd->error = 0;
523
524         if (cmd->flags & MMC_RSP_PRESENT) {
525                 if (cmd->flags & MMC_RSP_136) {
526                         r[0] = au_readl(host->iobase + SD_RESP3);
527                         r[1] = au_readl(host->iobase + SD_RESP2);
528                         r[2] = au_readl(host->iobase + SD_RESP1);
529                         r[3] = au_readl(host->iobase + SD_RESP0);
530
531                         /* The CRC is omitted from the response, so really
532                          * we only got 120 bytes, but the engine expects
533                          * 128 bits, so we have to shift things up.
534                          */
535                         for (i = 0; i < 4; i++) {
536                                 cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8;
537                                 if (i != 3)
538                                         cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24;
539                         }
540                 } else {
541                         /* Techincally, we should be getting all 48 bits of
542                          * the response (SD_RESP1 + SD_RESP2), but because
543                          * our response omits the CRC, our data ends up
544                          * being shifted 8 bits to the right.  In this case,
545                          * that means that the OSR data starts at bit 31,
546                          * so we can just read RESP0 and return that.
547                          */
548                         cmd->resp[0] = au_readl(host->iobase + SD_RESP0);
549                 }
550         }
551
552         /* Figure out errors */
553         if (status & (SD_STATUS_SC | SD_STATUS_WC | SD_STATUS_RC))
554                 cmd->error = -EILSEQ;
555
556         trans = host->flags & (HOST_F_XMIT | HOST_F_RECV);
557
558         if (!trans || cmd->error) {
559                 IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA | SD_CONFIG_RF);
560                 tasklet_schedule(&host->finish_task);
561                 return;
562         }
563
564         host->status = HOST_S_DATA;
565
566         if (host->flags & HOST_F_DMA) {
567 #ifdef CONFIG_SOC_AU1200        /* DBDMA */
568                 u32 channel = DMA_CHANNEL(host);
569
570                 /* Start the DMA as soon as the buffer gets something in it */
571
572                 if (host->flags & HOST_F_RECV) {
573                         u32 mask = SD_STATUS_DB | SD_STATUS_NE;
574
575                         while((status & mask) != mask)
576                                 status = au_readl(HOST_STATUS(host));
577                 }
578
579                 au1xxx_dbdma_start(channel);
580 #endif
581         }
582 }
583
584 static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate)
585 {
586         unsigned int pbus = get_au1x00_speed();
587         unsigned int divisor;
588         u32 config;
589
590         /* From databook:
591          * divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1
592          */
593         pbus /= ((au_readl(SYS_POWERCTRL) & 0x3) + 2);
594         pbus /= 2;
595         divisor = ((pbus / rate) / 2) - 1;
596
597         config = au_readl(HOST_CONFIG(host));
598
599         config &= ~(SD_CONFIG_DIV);
600         config |= (divisor & SD_CONFIG_DIV) | SD_CONFIG_DE;
601
602         au_writel(config, HOST_CONFIG(host));
603         au_sync();
604 }
605
606 static int au1xmmc_prepare_data(struct au1xmmc_host *host,
607                                 struct mmc_data *data)
608 {
609         int datalen = data->blocks * data->blksz;
610
611         if (data->flags & MMC_DATA_READ)
612                 host->flags |= HOST_F_RECV;
613         else
614                 host->flags |= HOST_F_XMIT;
615
616         if (host->mrq->stop)
617                 host->flags |= HOST_F_STOP;
618
619         host->dma.dir = DMA_BIDIRECTIONAL;
620
621         host->dma.len = dma_map_sg(mmc_dev(host->mmc), data->sg,
622                                    data->sg_len, host->dma.dir);
623
624         if (host->dma.len == 0)
625                 return -ETIMEDOUT;
626
627         au_writel(data->blksz - 1, HOST_BLKSIZE(host));
628
629         if (host->flags & HOST_F_DMA) {
630 #ifdef CONFIG_SOC_AU1200        /* DBDMA */
631                 int i;
632                 u32 channel = DMA_CHANNEL(host);
633
634                 au1xxx_dbdma_stop(channel);
635
636                 for (i = 0; i < host->dma.len; i++) {
637                         u32 ret = 0, flags = DDMA_FLAGS_NOIE;
638                         struct scatterlist *sg = &data->sg[i];
639                         int sg_len = sg->length;
640
641                         int len = (datalen > sg_len) ? sg_len : datalen;
642
643                         if (i == host->dma.len - 1)
644                                 flags = DDMA_FLAGS_IE;
645
646                         if (host->flags & HOST_F_XMIT) {
647                                 ret = au1xxx_dbdma_put_source_flags(channel,
648                                         (void *)sg_virt(sg), len, flags);
649                         } else {
650                                 ret = au1xxx_dbdma_put_dest_flags(channel,
651                                         (void *)sg_virt(sg), len, flags);
652                         }
653
654                         if (!ret)
655                                 goto dataerr;
656
657                         datalen -= len;
658                 }
659 #endif
660         } else {
661                 host->pio.index = 0;
662                 host->pio.offset = 0;
663                 host->pio.len = datalen;
664
665                 if (host->flags & HOST_F_XMIT)
666                         IRQ_ON(host, SD_CONFIG_TH);
667                 else
668                         IRQ_ON(host, SD_CONFIG_NE);
669                         /* IRQ_ON(host, SD_CONFIG_RA | SD_CONFIG_RF); */
670         }
671
672         return 0;
673
674 dataerr:
675         dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
676                         host->dma.dir);
677         return -ETIMEDOUT;
678 }
679
680 /* This actually starts a command or data transaction */
681 static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
682 {
683         struct au1xmmc_host *host = mmc_priv(mmc);
684         int ret = 0;
685
686         WARN_ON(irqs_disabled());
687         WARN_ON(host->status != HOST_S_IDLE);
688
689         host->mrq = mrq;
690         host->status = HOST_S_CMD;
691
692         /* fail request immediately if no card is present */
693         if (0 == au1xmmc_card_inserted(mmc)) {
694                 mrq->cmd->error = -ENOMEDIUM;
695                 au1xmmc_finish_request(host);
696                 return;
697         }
698
699         if (mrq->data) {
700                 FLUSH_FIFO(host);
701                 ret = au1xmmc_prepare_data(host, mrq->data);
702         }
703
704         if (!ret)
705                 ret = au1xmmc_send_command(host, 0, mrq->cmd, mrq->data);
706
707         if (ret) {
708                 mrq->cmd->error = ret;
709                 au1xmmc_finish_request(host);
710         }
711 }
712
713 static void au1xmmc_reset_controller(struct au1xmmc_host *host)
714 {
715         /* Apply the clock */
716         au_writel(SD_ENABLE_CE, HOST_ENABLE(host));
717         au_sync_delay(1);
718
719         au_writel(SD_ENABLE_R | SD_ENABLE_CE, HOST_ENABLE(host));
720         au_sync_delay(5);
721
722         au_writel(~0, HOST_STATUS(host));
723         au_sync();
724
725         au_writel(0, HOST_BLKSIZE(host));
726         au_writel(0x001fffff, HOST_TIMEOUT(host));
727         au_sync();
728
729         au_writel(SD_CONFIG2_EN, HOST_CONFIG2(host));
730         au_sync();
731
732         au_writel(SD_CONFIG2_EN | SD_CONFIG2_FF, HOST_CONFIG2(host));
733         au_sync_delay(1);
734
735         au_writel(SD_CONFIG2_EN, HOST_CONFIG2(host));
736         au_sync();
737
738         /* Configure interrupts */
739         au_writel(AU1XMMC_INTERRUPTS, HOST_CONFIG(host));
740         au_sync();
741 }
742
743
744 static void au1xmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
745 {
746         struct au1xmmc_host *host = mmc_priv(mmc);
747         u32 config2;
748
749         if (ios->power_mode == MMC_POWER_OFF)
750                 au1xmmc_set_power(host, 0);
751         else if (ios->power_mode == MMC_POWER_ON) {
752                 au1xmmc_set_power(host, 1);
753         }
754
755         if (ios->clock && ios->clock != host->clock) {
756                 au1xmmc_set_clock(host, ios->clock);
757                 host->clock = ios->clock;
758         }
759
760         config2 = au_readl(HOST_CONFIG2(host));
761         switch (ios->bus_width) {
762         case MMC_BUS_WIDTH_4:
763                 config2 |= SD_CONFIG2_WB;
764                 break;
765         case MMC_BUS_WIDTH_1:
766                 config2 &= ~SD_CONFIG2_WB;
767                 break;
768         }
769         au_writel(config2, HOST_CONFIG2(host));
770         au_sync();
771 }
772
773 #define STATUS_TIMEOUT (SD_STATUS_RAT | SD_STATUS_DT)
774 #define STATUS_DATA_IN  (SD_STATUS_NE)
775 #define STATUS_DATA_OUT (SD_STATUS_TH)
776
777 static irqreturn_t au1xmmc_irq(int irq, void *dev_id)
778 {
779         struct au1xmmc_host *host = dev_id;
780         u32 status;
781
782         status = au_readl(HOST_STATUS(host));
783
784         if (!(status & SD_STATUS_I))
785                 return IRQ_NONE;        /* not ours */
786
787         if (status & SD_STATUS_SI)      /* SDIO */
788                 mmc_signal_sdio_irq(host->mmc);
789
790         if (host->mrq && (status & STATUS_TIMEOUT)) {
791                 if (status & SD_STATUS_RAT)
792                         host->mrq->cmd->error = -ETIMEDOUT;
793                 else if (status & SD_STATUS_DT)
794                         host->mrq->data->error = -ETIMEDOUT;
795
796                 /* In PIO mode, interrupts might still be enabled */
797                 IRQ_OFF(host, SD_CONFIG_NE | SD_CONFIG_TH);
798
799                 /* IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA | SD_CONFIG_RF); */
800                 tasklet_schedule(&host->finish_task);
801         }
802 #if 0
803         else if (status & SD_STATUS_DD) {
804                 /* Sometimes we get a DD before a NE in PIO mode */
805                 if (!(host->flags & HOST_F_DMA) && (status & SD_STATUS_NE))
806                         au1xmmc_receive_pio(host);
807                 else {
808                         au1xmmc_data_complete(host, status);
809                         /* tasklet_schedule(&host->data_task); */
810                 }
811         }
812 #endif
813         else if (status & SD_STATUS_CR) {
814                 if (host->status == HOST_S_CMD)
815                         au1xmmc_cmd_complete(host, status);
816
817         } else if (!(host->flags & HOST_F_DMA)) {
818                 if ((host->flags & HOST_F_XMIT) && (status & STATUS_DATA_OUT))
819                         au1xmmc_send_pio(host);
820                 else if ((host->flags & HOST_F_RECV) && (status & STATUS_DATA_IN))
821                         au1xmmc_receive_pio(host);
822
823         } else if (status & 0x203F3C70) {
824                         DBG("Unhandled status %8.8x\n", host->pdev->id,
825                                 status);
826         }
827
828         au_writel(status, HOST_STATUS(host));
829         au_sync();
830
831         return IRQ_HANDLED;
832 }
833
834 #ifdef CONFIG_SOC_AU1200
835 /* 8bit memory DMA device */
836 static dbdev_tab_t au1xmmc_mem_dbdev = {
837         .dev_id         = DSCR_CMD0_ALWAYS,
838         .dev_flags      = DEV_FLAGS_ANYUSE,
839         .dev_tsize      = 0,
840         .dev_devwidth   = 8,
841         .dev_physaddr   = 0x00000000,
842         .dev_intlevel   = 0,
843         .dev_intpolarity = 0,
844 };
845 static int memid;
846
847 static void au1xmmc_dbdma_callback(int irq, void *dev_id)
848 {
849         struct au1xmmc_host *host = (struct au1xmmc_host *)dev_id;
850
851         /* Avoid spurious interrupts */
852         if (!host->mrq)
853                 return;
854
855         if (host->flags & HOST_F_STOP)
856                 SEND_STOP(host);
857
858         tasklet_schedule(&host->data_task);
859 }
860
861 static int au1xmmc_dbdma_init(struct au1xmmc_host *host)
862 {
863         struct resource *res;
864         int txid, rxid;
865
866         res = platform_get_resource(host->pdev, IORESOURCE_DMA, 0);
867         if (!res)
868                 return -ENODEV;
869         txid = res->start;
870
871         res = platform_get_resource(host->pdev, IORESOURCE_DMA, 1);
872         if (!res)
873                 return -ENODEV;
874         rxid = res->start;
875
876         if (!memid)
877                 return -ENODEV;
878
879         host->tx_chan = au1xxx_dbdma_chan_alloc(memid, txid,
880                                 au1xmmc_dbdma_callback, (void *)host);
881         if (!host->tx_chan) {
882                 dev_err(&host->pdev->dev, "cannot allocate TX DMA\n");
883                 return -ENODEV;
884         }
885
886         host->rx_chan = au1xxx_dbdma_chan_alloc(rxid, memid,
887                                 au1xmmc_dbdma_callback, (void *)host);
888         if (!host->rx_chan) {
889                 dev_err(&host->pdev->dev, "cannot allocate RX DMA\n");
890                 au1xxx_dbdma_chan_free(host->tx_chan);
891                 return -ENODEV;
892         }
893
894         au1xxx_dbdma_set_devwidth(host->tx_chan, 8);
895         au1xxx_dbdma_set_devwidth(host->rx_chan, 8);
896
897         au1xxx_dbdma_ring_alloc(host->tx_chan, AU1XMMC_DESCRIPTOR_COUNT);
898         au1xxx_dbdma_ring_alloc(host->rx_chan, AU1XMMC_DESCRIPTOR_COUNT);
899
900         /* DBDMA is good to go */
901         host->flags |= HOST_F_DMA;
902
903         return 0;
904 }
905
906 static void au1xmmc_dbdma_shutdown(struct au1xmmc_host *host)
907 {
908         if (host->flags & HOST_F_DMA) {
909                 host->flags &= ~HOST_F_DMA;
910                 au1xxx_dbdma_chan_free(host->tx_chan);
911                 au1xxx_dbdma_chan_free(host->rx_chan);
912         }
913 }
914 #endif
915
916 static void au1xmmc_enable_sdio_irq(struct mmc_host *mmc, int en)
917 {
918         struct au1xmmc_host *host = mmc_priv(mmc);
919
920         if (en)
921                 IRQ_ON(host, SD_CONFIG_SI);
922         else
923                 IRQ_OFF(host, SD_CONFIG_SI);
924 }
925
926 static const struct mmc_host_ops au1xmmc_ops = {
927         .request        = au1xmmc_request,
928         .set_ios        = au1xmmc_set_ios,
929         .get_ro         = au1xmmc_card_readonly,
930         .get_cd         = au1xmmc_card_inserted,
931         .enable_sdio_irq = au1xmmc_enable_sdio_irq,
932 };
933
934 static int __devinit au1xmmc_probe(struct platform_device *pdev)
935 {
936         struct mmc_host *mmc;
937         struct au1xmmc_host *host;
938         struct resource *r;
939         int ret;
940
941         mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev);
942         if (!mmc) {
943                 dev_err(&pdev->dev, "no memory for mmc_host\n");
944                 ret = -ENOMEM;
945                 goto out0;
946         }
947
948         host = mmc_priv(mmc);
949         host->mmc = mmc;
950         host->platdata = pdev->dev.platform_data;
951         host->pdev = pdev;
952
953         ret = -ENODEV;
954         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
955         if (!r) {
956                 dev_err(&pdev->dev, "no mmio defined\n");
957                 goto out1;
958         }
959
960         host->ioarea = request_mem_region(r->start, r->end - r->start + 1,
961                                            pdev->name);
962         if (!host->ioarea) {
963                 dev_err(&pdev->dev, "mmio already in use\n");
964                 goto out1;
965         }
966
967         host->iobase = (unsigned long)ioremap(r->start, 0x3c);
968         if (!host->iobase) {
969                 dev_err(&pdev->dev, "cannot remap mmio\n");
970                 goto out2;
971         }
972
973         r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
974         if (!r) {
975                 dev_err(&pdev->dev, "no IRQ defined\n");
976                 goto out3;
977         }
978
979         host->irq = r->start;
980         /* IRQ is shared among both SD controllers */
981         ret = request_irq(host->irq, au1xmmc_irq, IRQF_SHARED,
982                           DRIVER_NAME, host);
983         if (ret) {
984                 dev_err(&pdev->dev, "cannot grab IRQ\n");
985                 goto out3;
986         }
987
988         mmc->ops = &au1xmmc_ops;
989
990         mmc->f_min =   450000;
991         mmc->f_max = 24000000;
992
993         mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE;
994         mmc->max_phys_segs = AU1XMMC_DESCRIPTOR_COUNT;
995
996         mmc->max_blk_size = 2048;
997         mmc->max_blk_count = 512;
998
999         mmc->ocr_avail = AU1XMMC_OCR;
1000         mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
1001
1002         host->status = HOST_S_IDLE;
1003
1004         /* board-specific carddetect setup, if any */
1005         if (host->platdata && host->platdata->cd_setup) {
1006                 ret = host->platdata->cd_setup(mmc, 1);
1007                 if (ret) {
1008                         dev_warn(&pdev->dev, "board CD setup failed\n");
1009                         mmc->caps |= MMC_CAP_NEEDS_POLL;
1010                 }
1011         } else
1012                 mmc->caps |= MMC_CAP_NEEDS_POLL;
1013
1014         tasklet_init(&host->data_task, au1xmmc_tasklet_data,
1015                         (unsigned long)host);
1016
1017         tasklet_init(&host->finish_task, au1xmmc_tasklet_finish,
1018                         (unsigned long)host);
1019
1020 #ifdef CONFIG_SOC_AU1200
1021         ret = au1xmmc_dbdma_init(host);
1022         if (ret)
1023                 printk(KERN_INFO DRIVER_NAME ": DBDMA init failed; using PIO\n");
1024 #endif
1025
1026 #ifdef CONFIG_LEDS_CLASS
1027         if (host->platdata && host->platdata->led) {
1028                 struct led_classdev *led = host->platdata->led;
1029                 led->name = mmc_hostname(mmc);
1030                 led->brightness = LED_OFF;
1031                 led->default_trigger = mmc_hostname(mmc);
1032                 ret = led_classdev_register(mmc_dev(mmc), led);
1033                 if (ret)
1034                         goto out5;
1035         }
1036 #endif
1037
1038         au1xmmc_reset_controller(host);
1039
1040         ret = mmc_add_host(mmc);
1041         if (ret) {
1042                 dev_err(&pdev->dev, "cannot add mmc host\n");
1043                 goto out6;
1044         }
1045
1046         platform_set_drvdata(pdev, host);
1047
1048         printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X"
1049                 " (mode=%s)\n", pdev->id, host->iobase,
1050                 host->flags & HOST_F_DMA ? "dma" : "pio");
1051
1052         return 0;       /* all ok */
1053
1054 out6:
1055 #ifdef CONFIG_LEDS_CLASS
1056         if (host->platdata && host->platdata->led)
1057                 led_classdev_unregister(host->platdata->led);
1058 out5:
1059 #endif
1060         au_writel(0, HOST_ENABLE(host));
1061         au_writel(0, HOST_CONFIG(host));
1062         au_writel(0, HOST_CONFIG2(host));
1063         au_sync();
1064
1065 #ifdef CONFIG_SOC_AU1200
1066         au1xmmc_dbdma_shutdown(host);
1067 #endif
1068
1069         tasklet_kill(&host->data_task);
1070         tasklet_kill(&host->finish_task);
1071
1072         if (host->platdata && host->platdata->cd_setup &&
1073             !(mmc->caps & MMC_CAP_NEEDS_POLL))
1074                 host->platdata->cd_setup(mmc, 0);
1075
1076         free_irq(host->irq, host);
1077 out3:
1078         iounmap((void *)host->iobase);
1079 out2:
1080         release_resource(host->ioarea);
1081         kfree(host->ioarea);
1082 out1:
1083         mmc_free_host(mmc);
1084 out0:
1085         return ret;
1086 }
1087
1088 static int __devexit au1xmmc_remove(struct platform_device *pdev)
1089 {
1090         struct au1xmmc_host *host = platform_get_drvdata(pdev);
1091
1092         if (host) {
1093                 mmc_remove_host(host->mmc);
1094
1095 #ifdef CONFIG_LEDS_CLASS
1096                 if (host->platdata && host->platdata->led)
1097                         led_classdev_unregister(host->platdata->led);
1098 #endif
1099
1100                 if (host->platdata && host->platdata->cd_setup &&
1101                     !(host->mmc->caps & MMC_CAP_NEEDS_POLL))
1102                         host->platdata->cd_setup(host->mmc, 0);
1103
1104                 au_writel(0, HOST_ENABLE(host));
1105                 au_writel(0, HOST_CONFIG(host));
1106                 au_writel(0, HOST_CONFIG2(host));
1107                 au_sync();
1108
1109                 tasklet_kill(&host->data_task);
1110                 tasklet_kill(&host->finish_task);
1111
1112 #ifdef CONFIG_SOC_AU1200
1113                 au1xmmc_dbdma_shutdown(host);
1114 #endif
1115                 au1xmmc_set_power(host, 0);
1116
1117                 free_irq(host->irq, host);
1118                 iounmap((void *)host->iobase);
1119                 release_resource(host->ioarea);
1120                 kfree(host->ioarea);
1121
1122                 mmc_free_host(host->mmc);
1123                 platform_set_drvdata(pdev, NULL);
1124         }
1125         return 0;
1126 }
1127
1128 #ifdef CONFIG_PM
1129 static int au1xmmc_suspend(struct platform_device *pdev, pm_message_t state)
1130 {
1131         struct au1xmmc_host *host = platform_get_drvdata(pdev);
1132         int ret;
1133
1134         ret = mmc_suspend_host(host->mmc, state);
1135         if (ret)
1136                 return ret;
1137
1138         au_writel(0, HOST_CONFIG2(host));
1139         au_writel(0, HOST_CONFIG(host));
1140         au_writel(0xffffffff, HOST_STATUS(host));
1141         au_writel(0, HOST_ENABLE(host));
1142         au_sync();
1143
1144         return 0;
1145 }
1146
1147 static int au1xmmc_resume(struct platform_device *pdev)
1148 {
1149         struct au1xmmc_host *host = platform_get_drvdata(pdev);
1150
1151         au1xmmc_reset_controller(host);
1152
1153         return mmc_resume_host(host->mmc);
1154 }
1155 #else
1156 #define au1xmmc_suspend NULL
1157 #define au1xmmc_resume NULL
1158 #endif
1159
1160 static struct platform_driver au1xmmc_driver = {
1161         .probe         = au1xmmc_probe,
1162         .remove        = au1xmmc_remove,
1163         .suspend       = au1xmmc_suspend,
1164         .resume        = au1xmmc_resume,
1165         .driver        = {
1166                 .name  = DRIVER_NAME,
1167                 .owner = THIS_MODULE,
1168         },
1169 };
1170
1171 static int __init au1xmmc_init(void)
1172 {
1173 #ifdef CONFIG_SOC_AU1200
1174         /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
1175          * of 8 bits.  And since devices are shared, we need to create
1176          * our own to avoid freaking out other devices.
1177          */
1178         memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
1179         if (!memid)
1180                 printk(KERN_ERR "au1xmmc: cannot add memory dbdma dev\n");
1181 #endif
1182         return platform_driver_register(&au1xmmc_driver);
1183 }
1184
1185 static void __exit au1xmmc_exit(void)
1186 {
1187 #ifdef CONFIG_SOC_AU1200
1188         if (memid)
1189                 au1xxx_ddma_del_device(memid);
1190 #endif
1191         platform_driver_unregister(&au1xmmc_driver);
1192 }
1193
1194 module_init(au1xmmc_init);
1195 module_exit(au1xmmc_exit);
1196
1197 MODULE_AUTHOR("Advanced Micro Devices, Inc");
1198 MODULE_DESCRIPTION("MMC/SD driver for the Alchemy Au1XXX");
1199 MODULE_LICENSE("GPL");
1200 MODULE_ALIAS("platform:au1xxx-mmc");