qlge: Fix MAC address bonding issue.
[linux-2.6] / drivers / net / irda / w83977af_ir.c
1 /*********************************************************************
2  *                
3  * Filename:      w83977af_ir.c
4  * Version:       1.0
5  * Description:   FIR driver for the Winbond W83977AF Super I/O chip
6  * Status:        Experimental.
7  * Author:        Paul VanderSpek
8  * Created at:    Wed Nov  4 11:46:16 1998
9  * Modified at:   Fri Jan 28 12:10:59 2000
10  * Modified by:   Dag Brattli <dagb@cs.uit.no>
11  * 
12  *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>
13  *     Copyright (c) 1998-1999 Rebel.com
14  *      
15  *     This program is free software; you can redistribute it and/or 
16  *     modify it under the terms of the GNU General Public License as 
17  *     published by the Free Software Foundation; either version 2 of 
18  *     the License, or (at your option) any later version.
19  *  
20  *     Neither Paul VanderSpek nor Rebel.com admit liability nor provide
21  *     warranty for any of this software. This material is provided "AS-IS"
22  *     and at no charge.
23  *     
24  *     If you find bugs in this file, its very likely that the same bug
25  *     will also be in pc87108.c since the implementations are quite
26  *     similar.
27  *
28  *     Notice that all functions that needs to access the chip in _any_
29  *     way, must save BSR register on entry, and restore it on exit. 
30  *     It is _very_ important to follow this policy!
31  *
32  *         __u8 bank;
33  *     
34  *         bank = inb( iobase+BSR);
35  *  
36  *         do_your_stuff_here();
37  *
38  *         outb( bank, iobase+BSR);
39  *
40  ********************************************************************/
41
42 #include <linux/module.h>
43 #include <linux/kernel.h>
44 #include <linux/types.h>
45 #include <linux/skbuff.h>
46 #include <linux/netdevice.h>
47 #include <linux/ioport.h>
48 #include <linux/delay.h>
49 #include <linux/slab.h>
50 #include <linux/init.h>
51 #include <linux/rtnetlink.h>
52 #include <linux/dma-mapping.h>
53
54 #include <asm/io.h>
55 #include <asm/dma.h>
56 #include <asm/byteorder.h>
57
58 #include <net/irda/irda.h>
59 #include <net/irda/wrapper.h>
60 #include <net/irda/irda_device.h>
61 #include "w83977af.h"
62 #include "w83977af_ir.h"
63
64 #ifdef  CONFIG_ARCH_NETWINDER            /* Adjust to NetWinder differences */
65 #undef  CONFIG_NETWINDER_TX_DMA_PROBLEMS /* Not needed */
66 #define CONFIG_NETWINDER_RX_DMA_PROBLEMS /* Must have this one! */
67 #endif
68 #undef  CONFIG_USE_INTERNAL_TIMER  /* Just cannot make that timer work */
69 #define CONFIG_USE_W977_PNP        /* Currently needed */
70 #define PIO_MAX_SPEED       115200 
71
72 static char *driver_name = "w83977af_ir";
73 static int  qos_mtt_bits = 0x07;   /* 1 ms or more */
74
75 #define CHIP_IO_EXTENT 8
76
77 static unsigned int io[] = { 0x180, ~0, ~0, ~0 };
78 #ifdef CONFIG_ARCH_NETWINDER             /* Adjust to NetWinder differences */
79 static unsigned int irq[] = { 6, 0, 0, 0 };
80 #else
81 static unsigned int irq[] = { 11, 0, 0, 0 };
82 #endif
83 static unsigned int dma[] = { 1, 0, 0, 0 };
84 static unsigned int efbase[] = { W977_EFIO_BASE, W977_EFIO2_BASE };
85 static unsigned int efio = W977_EFIO_BASE;
86
87 static struct w83977af_ir *dev_self[] = { NULL, NULL, NULL, NULL};
88
89 /* Some prototypes */
90 static int  w83977af_open(int i, unsigned int iobase, unsigned int irq, 
91                           unsigned int dma);
92 static int  w83977af_close(struct w83977af_ir *self);
93 static int  w83977af_probe(int iobase, int irq, int dma);
94 static int  w83977af_dma_receive(struct w83977af_ir *self); 
95 static int  w83977af_dma_receive_complete(struct w83977af_ir *self);
96 static int  w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev);
97 static int  w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size);
98 static void w83977af_dma_write(struct w83977af_ir *self, int iobase);
99 static void w83977af_change_speed(struct w83977af_ir *self, __u32 speed);
100 static int  w83977af_is_receiving(struct w83977af_ir *self);
101
102 static int  w83977af_net_open(struct net_device *dev);
103 static int  w83977af_net_close(struct net_device *dev);
104 static int  w83977af_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
105
106 /*
107  * Function w83977af_init ()
108  *
109  *    Initialize chip. Just try to find out how many chips we are dealing with
110  *    and where they are
111  */
112 static int __init w83977af_init(void)
113 {
114         int i;
115
116         IRDA_DEBUG(0, "%s()\n", __func__ );
117
118         for (i=0; (io[i] < 2000) && (i < ARRAY_SIZE(dev_self)); i++) {
119                 if (w83977af_open(i, io[i], irq[i], dma[i]) == 0)
120                         return 0;
121         }
122         return -ENODEV;
123 }
124
125 /*
126  * Function w83977af_cleanup ()
127  *
128  *    Close all configured chips
129  *
130  */
131 static void __exit w83977af_cleanup(void)
132 {
133         int i;
134
135         IRDA_DEBUG(4, "%s()\n", __func__ );
136
137         for (i=0; i < ARRAY_SIZE(dev_self); i++) {
138                 if (dev_self[i])
139                         w83977af_close(dev_self[i]);
140         }
141 }
142
143 static const struct net_device_ops w83977_netdev_ops = {
144         .ndo_open       = w83977af_net_open,
145         .ndo_stop       = w83977af_net_close,
146         .ndo_start_xmit = w83977af_hard_xmit,
147         .ndo_do_ioctl   = w83977af_net_ioctl,
148 };
149
150 /*
151  * Function w83977af_open (iobase, irq)
152  *
153  *    Open driver instance
154  *
155  */
156 static int w83977af_open(int i, unsigned int iobase, unsigned int irq,
157                          unsigned int dma)
158 {
159         struct net_device *dev;
160         struct w83977af_ir *self;
161         int err;
162
163         IRDA_DEBUG(0, "%s()\n", __func__ );
164
165         /* Lock the port that we need */
166         if (!request_region(iobase, CHIP_IO_EXTENT, driver_name)) {
167                 IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
168                       __func__ , iobase);
169                 return -ENODEV;
170         }
171
172         if (w83977af_probe(iobase, irq, dma) == -1) {
173                 err = -1;
174                 goto err_out;
175         }
176         /*
177          *  Allocate new instance of the driver
178          */
179         dev = alloc_irdadev(sizeof(struct w83977af_ir));
180         if (dev == NULL) {
181                 printk( KERN_ERR "IrDA: Can't allocate memory for "
182                         "IrDA control block!\n");
183                 err = -ENOMEM;
184                 goto err_out;
185         }
186
187         self = netdev_priv(dev);
188         spin_lock_init(&self->lock);
189    
190
191         /* Initialize IO */
192         self->io.fir_base   = iobase;
193         self->io.irq       = irq;
194         self->io.fir_ext   = CHIP_IO_EXTENT;
195         self->io.dma       = dma;
196         self->io.fifo_size = 32;
197
198         /* Initialize QoS for this device */
199         irda_init_max_qos_capabilies(&self->qos);
200         
201         /* The only value we must override it the baudrate */
202
203         /* FIXME: The HP HDLS-1100 does not support 1152000! */
204         self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
205                 IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8);
206
207         /* The HP HDLS-1100 needs 1 ms according to the specs */
208         self->qos.min_turn_time.bits = qos_mtt_bits;
209         irda_qos_bits_to_value(&self->qos);
210         
211         /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
212         self->rx_buff.truesize = 14384; 
213         self->tx_buff.truesize = 4000;
214         
215         /* Allocate memory if needed */
216         self->rx_buff.head =
217                 dma_alloc_coherent(NULL, self->rx_buff.truesize,
218                                    &self->rx_buff_dma, GFP_KERNEL);
219         if (self->rx_buff.head == NULL) {
220                 err = -ENOMEM;
221                 goto err_out1;
222         }
223
224         memset(self->rx_buff.head, 0, self->rx_buff.truesize);
225         
226         self->tx_buff.head =
227                 dma_alloc_coherent(NULL, self->tx_buff.truesize,
228                                    &self->tx_buff_dma, GFP_KERNEL);
229         if (self->tx_buff.head == NULL) {
230                 err = -ENOMEM;
231                 goto err_out2;
232         }
233         memset(self->tx_buff.head, 0, self->tx_buff.truesize);
234
235         self->rx_buff.in_frame = FALSE;
236         self->rx_buff.state = OUTSIDE_FRAME;
237         self->tx_buff.data = self->tx_buff.head;
238         self->rx_buff.data = self->rx_buff.head;
239         self->netdev = dev;
240
241         dev->netdev_ops = &w83977_netdev_ops;
242
243         err = register_netdev(dev);
244         if (err) {
245                 IRDA_ERROR("%s(), register_netdevice() failed!\n", __func__);
246                 goto err_out3;
247         }
248         IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
249
250         /* Need to store self somewhere */
251         dev_self[i] = self;
252         
253         return 0;
254 err_out3:
255         dma_free_coherent(NULL, self->tx_buff.truesize,
256                           self->tx_buff.head, self->tx_buff_dma);
257 err_out2:       
258         dma_free_coherent(NULL, self->rx_buff.truesize,
259                           self->rx_buff.head, self->rx_buff_dma);
260 err_out1:
261         free_netdev(dev);
262 err_out:
263         release_region(iobase, CHIP_IO_EXTENT);
264         return err;
265 }
266
267 /*
268  * Function w83977af_close (self)
269  *
270  *    Close driver instance
271  *
272  */
273 static int w83977af_close(struct w83977af_ir *self)
274 {
275         int iobase;
276
277         IRDA_DEBUG(0, "%s()\n", __func__ );
278
279         iobase = self->io.fir_base;
280
281 #ifdef CONFIG_USE_W977_PNP
282         /* enter PnP configuration mode */
283         w977_efm_enter(efio);
284
285         w977_select_device(W977_DEVICE_IR, efio);
286
287         /* Deactivate device */
288         w977_write_reg(0x30, 0x00, efio);
289
290         w977_efm_exit(efio);
291 #endif /* CONFIG_USE_W977_PNP */
292
293         /* Remove netdevice */
294         unregister_netdev(self->netdev);
295
296         /* Release the PORT that this driver is using */
297         IRDA_DEBUG(0 , "%s(), Releasing Region %03x\n", 
298               __func__ , self->io.fir_base);
299         release_region(self->io.fir_base, self->io.fir_ext);
300
301         if (self->tx_buff.head)
302                 dma_free_coherent(NULL, self->tx_buff.truesize,
303                                   self->tx_buff.head, self->tx_buff_dma);
304         
305         if (self->rx_buff.head)
306                 dma_free_coherent(NULL, self->rx_buff.truesize,
307                                   self->rx_buff.head, self->rx_buff_dma);
308
309         free_netdev(self->netdev);
310
311         return 0;
312 }
313
314 static int w83977af_probe(int iobase, int irq, int dma)
315 {
316         int version;
317         int i;
318         
319         for (i=0; i < 2; i++) {
320                 IRDA_DEBUG( 0, "%s()\n", __func__ );
321 #ifdef CONFIG_USE_W977_PNP
322                 /* Enter PnP configuration mode */
323                 w977_efm_enter(efbase[i]);
324   
325                 w977_select_device(W977_DEVICE_IR, efbase[i]);
326   
327                 /* Configure PnP port, IRQ, and DMA channel */
328                 w977_write_reg(0x60, (iobase >> 8) & 0xff, efbase[i]);
329                 w977_write_reg(0x61, (iobase) & 0xff, efbase[i]);
330   
331                 w977_write_reg(0x70, irq, efbase[i]);
332 #ifdef CONFIG_ARCH_NETWINDER
333                 /* Netwinder uses 1 higher than Linux */
334                 w977_write_reg(0x74, dma+1, efbase[i]);
335 #else
336                 w977_write_reg(0x74, dma, efbase[i]);   
337 #endif /*CONFIG_ARCH_NETWINDER */
338                 w977_write_reg(0x75, 0x04, efbase[i]);  /* Disable Tx DMA */
339         
340                 /* Set append hardware CRC, enable IR bank selection */ 
341                 w977_write_reg(0xf0, APEDCRC|ENBNKSEL, efbase[i]);
342   
343                 /* Activate device */
344                 w977_write_reg(0x30, 0x01, efbase[i]);
345   
346                 w977_efm_exit(efbase[i]);
347 #endif /* CONFIG_USE_W977_PNP */
348                 /* Disable Advanced mode */
349                 switch_bank(iobase, SET2);
350                 outb(iobase+2, 0x00);  
351  
352                 /* Turn on UART (global) interrupts */
353                 switch_bank(iobase, SET0);
354                 outb(HCR_EN_IRQ, iobase+HCR);
355         
356                 /* Switch to advanced mode */
357                 switch_bank(iobase, SET2);
358                 outb(inb(iobase+ADCR1) | ADCR1_ADV_SL, iobase+ADCR1);
359   
360                 /* Set default IR-mode */
361                 switch_bank(iobase, SET0);
362                 outb(HCR_SIR, iobase+HCR);
363   
364                 /* Read the Advanced IR ID */
365                 switch_bank(iobase, SET3);
366                 version = inb(iobase+AUID);
367         
368                 /* Should be 0x1? */
369                 if (0x10 == (version & 0xf0)) {
370                         efio = efbase[i];
371  
372                         /* Set FIFO size to 32 */
373                         switch_bank(iobase, SET2);
374                         outb(ADCR2_RXFS32|ADCR2_TXFS32, iobase+ADCR2);  
375         
376                         /* Set FIFO threshold to TX17, RX16 */
377                         switch_bank(iobase, SET0);      
378                         outb(UFR_RXTL|UFR_TXTL|UFR_TXF_RST|UFR_RXF_RST|
379                              UFR_EN_FIFO,iobase+UFR);
380  
381                         /* Receiver frame length */
382                         switch_bank(iobase, SET4);
383                         outb(2048 & 0xff, iobase+6);
384                         outb((2048 >> 8) & 0x1f, iobase+7);
385
386                         /* 
387                          * Init HP HSDL-1100 transceiver. 
388                          * 
389                          * Set IRX_MSL since we have 2 * receive paths IRRX, 
390                          * and IRRXH. Clear IRSL0D since we want IRSL0 * to 
391                          * be a input pin used for IRRXH 
392                          *
393                          *   IRRX  pin 37 connected to receiver 
394                          *   IRTX  pin 38 connected to transmitter
395                          *   FIRRX pin 39 connected to receiver      (IRSL0) 
396                          *   CIRRX pin 40 connected to pin 37
397                          */
398                         switch_bank(iobase, SET7);
399                         outb(0x40, iobase+7);
400                         
401                         IRDA_MESSAGE("W83977AF (IR) driver loaded. "
402                                      "Version: 0x%02x\n", version);
403                         
404                         return 0;
405                 } else {
406                         /* Try next extented function register address */
407                         IRDA_DEBUG( 0, "%s(), Wrong chip version", __func__ );
408                 }
409         }       
410         return -1;
411 }
412
413 static void w83977af_change_speed(struct w83977af_ir *self, __u32 speed)
414 {
415         int ir_mode = HCR_SIR;
416         int iobase; 
417         __u8 set;
418
419         iobase = self->io.fir_base;
420
421         /* Update accounting for new speed */
422         self->io.speed = speed;
423
424         /* Save current bank */
425         set = inb(iobase+SSR);
426
427         /* Disable interrupts */
428         switch_bank(iobase, SET0);
429         outb(0, iobase+ICR);
430
431         /* Select Set 2 */
432         switch_bank(iobase, SET2);
433         outb(0x00, iobase+ABHL);
434
435         switch (speed) {
436         case 9600:   outb(0x0c, iobase+ABLL); break;
437         case 19200:  outb(0x06, iobase+ABLL); break;
438         case 38400:  outb(0x03, iobase+ABLL); break;
439         case 57600:  outb(0x02, iobase+ABLL); break;
440         case 115200: outb(0x01, iobase+ABLL); break;
441         case 576000:
442                 ir_mode = HCR_MIR_576;
443                 IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__ );
444                 break;
445         case 1152000:
446                 ir_mode = HCR_MIR_1152;
447                 IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__ );
448                 break;
449         case 4000000:
450                 ir_mode = HCR_FIR;
451                 IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__ );
452                 break;
453         default:
454                 ir_mode = HCR_FIR;
455                 IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __func__ , speed);
456                 break;
457         }
458
459         /* Set speed mode */
460         switch_bank(iobase, SET0);
461         outb(ir_mode, iobase+HCR);
462
463         /* set FIFO size to 32 */
464         switch_bank(iobase, SET2);
465         outb(ADCR2_RXFS32|ADCR2_TXFS32, iobase+ADCR2);  
466         
467         /* set FIFO threshold to TX17, RX16 */
468         switch_bank(iobase, SET0);
469         outb(0x00, iobase+UFR);        /* Reset */
470         outb(UFR_EN_FIFO, iobase+UFR); /* First we must enable FIFO */
471         outb(0xa7, iobase+UFR);
472
473         netif_wake_queue(self->netdev);
474                 
475         /* Enable some interrupts so we can receive frames */
476         switch_bank(iobase, SET0);
477         if (speed > PIO_MAX_SPEED) {
478                 outb(ICR_EFSFI, iobase+ICR);
479                 w83977af_dma_receive(self);
480         } else
481                 outb(ICR_ERBRI, iobase+ICR);
482         
483         /* Restore SSR */
484         outb(set, iobase+SSR);
485 }
486
487 /*
488  * Function w83977af_hard_xmit (skb, dev)
489  *
490  *    Sets up a DMA transfer to send the current frame.
491  *
492  */
493 static int w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev)
494 {
495         struct w83977af_ir *self;
496         __s32 speed;
497         int iobase;
498         __u8 set;
499         int mtt;
500         
501         self = netdev_priv(dev);
502
503         iobase = self->io.fir_base;
504
505         IRDA_DEBUG(4, "%s(%ld), skb->len=%d\n", __func__ , jiffies,
506                    (int) skb->len);
507         
508         /* Lock transmit buffer */
509         netif_stop_queue(dev);
510         
511         /* Check if we need to change the speed */
512         speed = irda_get_next_speed(skb);
513         if ((speed != self->io.speed) && (speed != -1)) {
514                 /* Check for empty frame */
515                 if (!skb->len) {
516                         w83977af_change_speed(self, speed); 
517                         dev->trans_start = jiffies;
518                         dev_kfree_skb(skb);
519                         return 0;
520                 } else
521                         self->new_speed = speed;
522         }
523
524         /* Save current set */
525         set = inb(iobase+SSR);
526         
527         /* Decide if we should use PIO or DMA transfer */
528         if (self->io.speed > PIO_MAX_SPEED) {
529                 self->tx_buff.data = self->tx_buff.head;
530                 skb_copy_from_linear_data(skb, self->tx_buff.data, skb->len);
531                 self->tx_buff.len = skb->len;
532                 
533                 mtt = irda_get_mtt(skb);
534 #ifdef CONFIG_USE_INTERNAL_TIMER
535                 if (mtt > 50) {
536                         /* Adjust for timer resolution */
537                         mtt /= 1000+1;
538
539                         /* Setup timer */
540                         switch_bank(iobase, SET4);
541                         outb(mtt & 0xff, iobase+TMRL);
542                         outb((mtt >> 8) & 0x0f, iobase+TMRH);
543                         
544                         /* Start timer */
545                         outb(IR_MSL_EN_TMR, iobase+IR_MSL);
546                         self->io.direction = IO_XMIT;
547                         
548                         /* Enable timer interrupt */
549                         switch_bank(iobase, SET0);
550                         outb(ICR_ETMRI, iobase+ICR);
551                 } else {
552 #endif
553                         IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __func__ , jiffies, mtt);
554                         if (mtt)
555                                 udelay(mtt);
556
557                         /* Enable DMA interrupt */
558                         switch_bank(iobase, SET0);
559                         outb(ICR_EDMAI, iobase+ICR);
560                         w83977af_dma_write(self, iobase);
561 #ifdef CONFIG_USE_INTERNAL_TIMER
562                 }
563 #endif
564         } else {
565                 self->tx_buff.data = self->tx_buff.head;
566                 self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, 
567                                                    self->tx_buff.truesize);
568                 
569                 /* Add interrupt on tx low level (will fire immediately) */
570                 switch_bank(iobase, SET0);
571                 outb(ICR_ETXTHI, iobase+ICR);
572         }
573         dev->trans_start = jiffies;
574         dev_kfree_skb(skb);
575
576         /* Restore set register */
577         outb(set, iobase+SSR);
578
579         return 0;
580 }
581
582 /*
583  * Function w83977af_dma_write (self, iobase)
584  *
585  *    Send frame using DMA
586  *
587  */
588 static void w83977af_dma_write(struct w83977af_ir *self, int iobase)
589 {
590         __u8 set;
591 #ifdef CONFIG_NETWINDER_TX_DMA_PROBLEMS
592         unsigned long flags;
593         __u8 hcr;
594 #endif
595         IRDA_DEBUG(4, "%s(), len=%d\n", __func__ , self->tx_buff.len);
596
597         /* Save current set */
598         set = inb(iobase+SSR);
599
600         /* Disable DMA */
601         switch_bank(iobase, SET0);
602         outb(inb(iobase+HCR) & ~HCR_EN_DMA, iobase+HCR);
603
604         /* Choose transmit DMA channel  */ 
605         switch_bank(iobase, SET2);
606         outb(ADCR1_D_CHSW|/*ADCR1_DMA_F|*/ADCR1_ADV_SL, iobase+ADCR1);
607 #ifdef CONFIG_NETWINDER_TX_DMA_PROBLEMS
608         spin_lock_irqsave(&self->lock, flags);
609
610         disable_dma(self->io.dma);
611         clear_dma_ff(self->io.dma);
612         set_dma_mode(self->io.dma, DMA_MODE_READ);
613         set_dma_addr(self->io.dma, self->tx_buff_dma);
614         set_dma_count(self->io.dma, self->tx_buff.len);
615 #else
616         irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len,
617                        DMA_MODE_WRITE); 
618 #endif
619         self->io.direction = IO_XMIT;
620         
621         /* Enable DMA */
622         switch_bank(iobase, SET0);
623 #ifdef CONFIG_NETWINDER_TX_DMA_PROBLEMS
624         hcr = inb(iobase+HCR);
625         outb(hcr | HCR_EN_DMA, iobase+HCR);
626         enable_dma(self->io.dma);
627         spin_unlock_irqrestore(&self->lock, flags);
628 #else   
629         outb(inb(iobase+HCR) | HCR_EN_DMA | HCR_TX_WT, iobase+HCR);
630 #endif
631
632         /* Restore set register */
633         outb(set, iobase+SSR);
634 }
635
636 /*
637  * Function w83977af_pio_write (iobase, buf, len, fifo_size)
638  *
639  *    
640  *
641  */
642 static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
643 {
644         int actual = 0;
645         __u8 set;
646         
647         IRDA_DEBUG(4, "%s()\n", __func__ );
648
649         /* Save current bank */
650         set = inb(iobase+SSR);
651
652         switch_bank(iobase, SET0);
653         if (!(inb_p(iobase+USR) & USR_TSRE)) {
654                 IRDA_DEBUG(4,
655                            "%s(), warning, FIFO not empty yet!\n", __func__  );
656
657                 fifo_size -= 17;
658                 IRDA_DEBUG(4, "%s(), %d bytes left in tx fifo\n", 
659                            __func__ , fifo_size);
660         }
661
662         /* Fill FIFO with current frame */
663         while ((fifo_size-- > 0) && (actual < len)) {
664                 /* Transmit next byte */
665                 outb(buf[actual++], iobase+TBR);
666         }
667         
668         IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", 
669                    __func__ , fifo_size, actual, len);
670
671         /* Restore bank */
672         outb(set, iobase+SSR);
673
674         return actual;
675 }
676
677 /*
678  * Function w83977af_dma_xmit_complete (self)
679  *
680  *    The transfer of a frame in finished. So do the necessary things
681  *
682  *    
683  */
684 static void w83977af_dma_xmit_complete(struct w83977af_ir *self)
685 {
686         int iobase;
687         __u8 set;
688
689         IRDA_DEBUG(4, "%s(%ld)\n", __func__ , jiffies);
690
691         IRDA_ASSERT(self != NULL, return;);
692
693         iobase = self->io.fir_base;
694
695         /* Save current set */
696         set = inb(iobase+SSR);
697
698         /* Disable DMA */
699         switch_bank(iobase, SET0);
700         outb(inb(iobase+HCR) & ~HCR_EN_DMA, iobase+HCR);
701         
702         /* Check for underrrun! */
703         if (inb(iobase+AUDR) & AUDR_UNDR) {
704                 IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __func__ );
705                 
706                 self->netdev->stats.tx_errors++;
707                 self->netdev->stats.tx_fifo_errors++;
708
709                 /* Clear bit, by writing 1 to it */
710                 outb(AUDR_UNDR, iobase+AUDR);
711         } else
712                 self->netdev->stats.tx_packets++;
713
714         
715         if (self->new_speed) {
716                 w83977af_change_speed(self, self->new_speed);
717                 self->new_speed = 0;
718         }
719
720         /* Unlock tx_buff and request another frame */
721         /* Tell the network layer, that we want more frames */
722         netif_wake_queue(self->netdev);
723         
724         /* Restore set */
725         outb(set, iobase+SSR);
726 }
727
728 /*
729  * Function w83977af_dma_receive (self)
730  *
731  *    Get ready for receiving a frame. The device will initiate a DMA
732  *    if it starts to receive a frame.
733  *
734  */
735 static int w83977af_dma_receive(struct w83977af_ir *self)
736 {
737         int iobase;
738         __u8 set;
739 #ifdef CONFIG_NETWINDER_RX_DMA_PROBLEMS
740         unsigned long flags;
741         __u8 hcr;
742 #endif
743         IRDA_ASSERT(self != NULL, return -1;);
744
745         IRDA_DEBUG(4, "%s\n", __func__ );
746
747         iobase= self->io.fir_base;
748
749         /* Save current set */
750         set = inb(iobase+SSR);
751
752         /* Disable DMA */
753         switch_bank(iobase, SET0);
754         outb(inb(iobase+HCR) & ~HCR_EN_DMA, iobase+HCR);
755
756         /* Choose DMA Rx, DMA Fairness, and Advanced mode */
757         switch_bank(iobase, SET2);
758         outb((inb(iobase+ADCR1) & ~ADCR1_D_CHSW)/*|ADCR1_DMA_F*/|ADCR1_ADV_SL,
759              iobase+ADCR1);
760
761         self->io.direction = IO_RECV;
762         self->rx_buff.data = self->rx_buff.head;
763
764 #ifdef CONFIG_NETWINDER_RX_DMA_PROBLEMS
765         spin_lock_irqsave(&self->lock, flags);
766
767         disable_dma(self->io.dma);
768         clear_dma_ff(self->io.dma);
769         set_dma_mode(self->io.dma, DMA_MODE_READ);
770         set_dma_addr(self->io.dma, self->rx_buff_dma);
771         set_dma_count(self->io.dma, self->rx_buff.truesize);
772 #else
773         irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
774                        DMA_MODE_READ);
775 #endif
776         /* 
777          * Reset Rx FIFO. This will also flush the ST_FIFO, it's very 
778          * important that we don't reset the Tx FIFO since it might not
779          * be finished transmitting yet
780          */
781         switch_bank(iobase, SET0);
782         outb(UFR_RXTL|UFR_TXTL|UFR_RXF_RST|UFR_EN_FIFO, iobase+UFR);
783         self->st_fifo.len = self->st_fifo.tail = self->st_fifo.head = 0;
784         
785         /* Enable DMA */
786         switch_bank(iobase, SET0);
787 #ifdef CONFIG_NETWINDER_RX_DMA_PROBLEMS
788         hcr = inb(iobase+HCR);
789         outb(hcr | HCR_EN_DMA, iobase+HCR);
790         enable_dma(self->io.dma);
791         spin_unlock_irqrestore(&self->lock, flags);
792 #else   
793         outb(inb(iobase+HCR) | HCR_EN_DMA, iobase+HCR);
794 #endif
795         /* Restore set */
796         outb(set, iobase+SSR);
797
798         return 0;
799 }
800
801 /*
802  * Function w83977af_receive_complete (self)
803  *
804  *    Finished with receiving a frame
805  *
806  */
807 static int w83977af_dma_receive_complete(struct w83977af_ir *self)
808 {
809         struct sk_buff *skb;
810         struct st_fifo *st_fifo;
811         int len;
812         int iobase;
813         __u8 set;
814         __u8 status;
815
816         IRDA_DEBUG(4, "%s\n", __func__ );
817
818         st_fifo = &self->st_fifo;
819
820         iobase = self->io.fir_base;
821
822         /* Save current set */
823         set = inb(iobase+SSR);
824         
825         iobase = self->io.fir_base;
826
827         /* Read status FIFO */
828         switch_bank(iobase, SET5);
829         while ((status = inb(iobase+FS_FO)) & FS_FO_FSFDR) {
830                 st_fifo->entries[st_fifo->tail].status = status;
831                 
832                 st_fifo->entries[st_fifo->tail].len  = inb(iobase+RFLFL);
833                 st_fifo->entries[st_fifo->tail].len |= inb(iobase+RFLFH) << 8;
834                 
835                 st_fifo->tail++;
836                 st_fifo->len++;
837         }
838         
839         while (st_fifo->len) {
840                 /* Get first entry */
841                 status = st_fifo->entries[st_fifo->head].status;
842                 len    = st_fifo->entries[st_fifo->head].len;
843                 st_fifo->head++;
844                 st_fifo->len--;
845
846                 /* Check for errors */
847                 if (status & FS_FO_ERR_MSK) {
848                         if (status & FS_FO_LST_FR) {
849                                 /* Add number of lost frames to stats */
850                                 self->netdev->stats.rx_errors += len;
851                         } else {
852                                 /* Skip frame */
853                                 self->netdev->stats.rx_errors++;
854                                 
855                                 self->rx_buff.data += len;
856                                 
857                                 if (status & FS_FO_MX_LEX)
858                                         self->netdev->stats.rx_length_errors++;
859                                 
860                                 if (status & FS_FO_PHY_ERR) 
861                                         self->netdev->stats.rx_frame_errors++;
862                                 
863                                 if (status & FS_FO_CRC_ERR) 
864                                         self->netdev->stats.rx_crc_errors++;
865                         }
866                         /* The errors below can be reported in both cases */
867                         if (status & FS_FO_RX_OV)
868                                 self->netdev->stats.rx_fifo_errors++;
869                         
870                         if (status & FS_FO_FSF_OV)
871                                 self->netdev->stats.rx_fifo_errors++;
872                         
873                 } else {
874                         /* Check if we have transferred all data to memory */
875                         switch_bank(iobase, SET0);
876                         if (inb(iobase+USR) & USR_RDR) {
877 #ifdef CONFIG_USE_INTERNAL_TIMER
878                                 /* Put this entry back in fifo */
879                                 st_fifo->head--;
880                                 st_fifo->len++;
881                                 st_fifo->entries[st_fifo->head].status = status;
882                                 st_fifo->entries[st_fifo->head].len = len;
883                                 
884                                 /* Restore set register */
885                                 outb(set, iobase+SSR);
886                         
887                                 return FALSE;   /* I'll be back! */
888 #else
889                                 udelay(80); /* Should be enough!? */
890 #endif
891                         }
892                                                 
893                         skb = dev_alloc_skb(len+1);
894                         if (skb == NULL)  {
895                                 printk(KERN_INFO
896                                        "%s(), memory squeeze, dropping frame.\n", __func__);
897                                 /* Restore set register */
898                                 outb(set, iobase+SSR);
899
900                                 return FALSE;
901                         }
902                         
903                         /*  Align to 20 bytes */
904                         skb_reserve(skb, 1); 
905                         
906                         /* Copy frame without CRC */
907                         if (self->io.speed < 4000000) {
908                                 skb_put(skb, len-2);
909                                 skb_copy_to_linear_data(skb,
910                                                         self->rx_buff.data,
911                                                         len - 2);
912                         } else {
913                                 skb_put(skb, len-4);
914                                 skb_copy_to_linear_data(skb,
915                                                         self->rx_buff.data,
916                                                         len - 4);
917                         }
918
919                         /* Move to next frame */
920                         self->rx_buff.data += len;
921                         self->netdev->stats.rx_packets++;
922                         
923                         skb->dev = self->netdev;
924                         skb_reset_mac_header(skb);
925                         skb->protocol = htons(ETH_P_IRDA);
926                         netif_rx(skb);
927                 }
928         }
929         /* Restore set register */
930         outb(set, iobase+SSR);
931
932         return TRUE;
933 }
934
935 /*
936  * Function pc87108_pio_receive (self)
937  *
938  *    Receive all data in receiver FIFO
939  *
940  */
941 static void w83977af_pio_receive(struct w83977af_ir *self) 
942 {
943         __u8 byte = 0x00;
944         int iobase;
945
946         IRDA_DEBUG(4, "%s()\n", __func__ );
947
948         IRDA_ASSERT(self != NULL, return;);
949         
950         iobase = self->io.fir_base;
951         
952         /*  Receive all characters in Rx FIFO */
953         do {
954                 byte = inb(iobase+RBR);
955                 async_unwrap_char(self->netdev, &self->netdev->stats, &self->rx_buff,
956                                   byte);
957         } while (inb(iobase+USR) & USR_RDR); /* Data available */       
958 }
959
960 /*
961  * Function w83977af_sir_interrupt (self, eir)
962  *
963  *    Handle SIR interrupt
964  *
965  */
966 static __u8 w83977af_sir_interrupt(struct w83977af_ir *self, int isr)
967 {
968         int actual;
969         __u8 new_icr = 0;
970         __u8 set;
971         int iobase;
972
973         IRDA_DEBUG(4, "%s(), isr=%#x\n", __func__ , isr);
974         
975         iobase = self->io.fir_base;
976         /* Transmit FIFO low on data */
977         if (isr & ISR_TXTH_I) {
978                 /* Write data left in transmit buffer */
979                 actual = w83977af_pio_write(self->io.fir_base, 
980                                             self->tx_buff.data, 
981                                             self->tx_buff.len, 
982                                             self->io.fifo_size);
983
984                 self->tx_buff.data += actual;
985                 self->tx_buff.len  -= actual;
986                 
987                 self->io.direction = IO_XMIT;
988
989                 /* Check if finished */
990                 if (self->tx_buff.len > 0) {
991                         new_icr |= ICR_ETXTHI;
992                 } else {
993                         set = inb(iobase+SSR);
994                         switch_bank(iobase, SET0);
995                         outb(AUDR_SFEND, iobase+AUDR);
996                         outb(set, iobase+SSR); 
997
998                         self->netdev->stats.tx_packets++;
999
1000                         /* Feed me more packets */
1001                         netif_wake_queue(self->netdev);
1002                         new_icr |= ICR_ETBREI;
1003                 }
1004         }
1005         /* Check if transmission has completed */
1006         if (isr & ISR_TXEMP_I) {                
1007                 /* Check if we need to change the speed? */
1008                 if (self->new_speed) {
1009                         IRDA_DEBUG(2,
1010                                    "%s(), Changing speed!\n", __func__ );
1011                         w83977af_change_speed(self, self->new_speed);
1012                         self->new_speed = 0;
1013                 }
1014
1015                 /* Turn around and get ready to receive some data */
1016                 self->io.direction = IO_RECV;
1017                 new_icr |= ICR_ERBRI;
1018         }
1019
1020         /* Rx FIFO threshold or timeout */
1021         if (isr & ISR_RXTH_I) {
1022                 w83977af_pio_receive(self);
1023
1024                 /* Keep receiving */
1025                 new_icr |= ICR_ERBRI;
1026         }
1027         return new_icr;
1028 }
1029
1030 /*
1031  * Function pc87108_fir_interrupt (self, eir)
1032  *
1033  *    Handle MIR/FIR interrupt
1034  *
1035  */
1036 static __u8 w83977af_fir_interrupt(struct w83977af_ir *self, int isr)
1037 {
1038         __u8 new_icr = 0;
1039         __u8 set;
1040         int iobase;
1041
1042         iobase = self->io.fir_base;
1043         set = inb(iobase+SSR);
1044         
1045         /* End of frame detected in FIFO */
1046         if (isr & (ISR_FEND_I|ISR_FSF_I)) {
1047                 if (w83977af_dma_receive_complete(self)) {
1048                         
1049                         /* Wait for next status FIFO interrupt */
1050                         new_icr |= ICR_EFSFI;
1051                 } else {
1052                         /* DMA not finished yet */
1053
1054                         /* Set timer value, resolution 1 ms */
1055                         switch_bank(iobase, SET4);
1056                         outb(0x01, iobase+TMRL); /* 1 ms */
1057                         outb(0x00, iobase+TMRH);
1058
1059                         /* Start timer */
1060                         outb(IR_MSL_EN_TMR, iobase+IR_MSL);
1061
1062                         new_icr |= ICR_ETMRI;
1063                 }
1064         }
1065         /* Timer finished */
1066         if (isr & ISR_TMR_I) {
1067                 /* Disable timer */
1068                 switch_bank(iobase, SET4);
1069                 outb(0, iobase+IR_MSL);
1070
1071                 /* Clear timer event */
1072                 /* switch_bank(iobase, SET0); */
1073 /*              outb(ASCR_CTE, iobase+ASCR); */
1074
1075                 /* Check if this is a TX timer interrupt */
1076                 if (self->io.direction == IO_XMIT) {
1077                         w83977af_dma_write(self, iobase);
1078
1079                         new_icr |= ICR_EDMAI;
1080                 } else {
1081                         /* Check if DMA has now finished */
1082                         w83977af_dma_receive_complete(self);
1083
1084                         new_icr |= ICR_EFSFI;
1085                 }
1086         }       
1087         /* Finished with DMA */
1088         if (isr & ISR_DMA_I) {
1089                 w83977af_dma_xmit_complete(self);
1090
1091                 /* Check if there are more frames to be transmitted */
1092                 /* if (irda_device_txqueue_empty(self)) { */
1093                 
1094                 /* Prepare for receive 
1095                  * 
1096                  * ** Netwinder Tx DMA likes that we do this anyway **
1097                  */
1098                 w83977af_dma_receive(self);
1099                 new_icr = ICR_EFSFI;
1100                /* } */
1101         }
1102         
1103         /* Restore set */
1104         outb(set, iobase+SSR);
1105
1106         return new_icr;
1107 }
1108
1109 /*
1110  * Function w83977af_interrupt (irq, dev_id, regs)
1111  *
1112  *    An interrupt from the chip has arrived. Time to do some work
1113  *
1114  */
1115 static irqreturn_t w83977af_interrupt(int irq, void *dev_id)
1116 {
1117         struct net_device *dev = dev_id;
1118         struct w83977af_ir *self;
1119         __u8 set, icr, isr;
1120         int iobase;
1121
1122         self = netdev_priv(dev);
1123
1124         iobase = self->io.fir_base;
1125
1126         /* Save current bank */
1127         set = inb(iobase+SSR);
1128         switch_bank(iobase, SET0);
1129         
1130         icr = inb(iobase+ICR); 
1131         isr = inb(iobase+ISR) & icr; /* Mask out the interesting ones */ 
1132
1133         outb(0, iobase+ICR); /* Disable interrupts */
1134         
1135         if (isr) {
1136                 /* Dispatch interrupt handler for the current speed */
1137                 if (self->io.speed > PIO_MAX_SPEED )
1138                         icr = w83977af_fir_interrupt(self, isr);
1139                 else
1140                         icr = w83977af_sir_interrupt(self, isr);
1141         }
1142
1143         outb(icr, iobase+ICR);    /* Restore (new) interrupts */
1144         outb(set, iobase+SSR);    /* Restore bank register */
1145         return IRQ_RETVAL(isr);
1146 }
1147
1148 /*
1149  * Function w83977af_is_receiving (self)
1150  *
1151  *    Return TRUE is we are currently receiving a frame
1152  *
1153  */
1154 static int w83977af_is_receiving(struct w83977af_ir *self)
1155 {
1156         int status = FALSE;
1157         int iobase;
1158         __u8 set;
1159
1160         IRDA_ASSERT(self != NULL, return FALSE;);
1161
1162         if (self->io.speed > 115200) {
1163                 iobase = self->io.fir_base;
1164
1165                 /* Check if rx FIFO is not empty */
1166                 set = inb(iobase+SSR);
1167                 switch_bank(iobase, SET2);
1168                 if ((inb(iobase+RXFDTH) & 0x3f) != 0) {
1169                         /* We are receiving something */
1170                         status =  TRUE;
1171                 }
1172                 outb(set, iobase+SSR);
1173         } else 
1174                 status = (self->rx_buff.state != OUTSIDE_FRAME);
1175         
1176         return status;
1177 }
1178
1179 /*
1180  * Function w83977af_net_open (dev)
1181  *
1182  *    Start the device
1183  *
1184  */
1185 static int w83977af_net_open(struct net_device *dev)
1186 {
1187         struct w83977af_ir *self;
1188         int iobase;
1189         char hwname[32];
1190         __u8 set;
1191         
1192         IRDA_DEBUG(0, "%s()\n", __func__ );
1193         
1194         IRDA_ASSERT(dev != NULL, return -1;);
1195         self = netdev_priv(dev);
1196         
1197         IRDA_ASSERT(self != NULL, return 0;);
1198         
1199         iobase = self->io.fir_base;
1200
1201         if (request_irq(self->io.irq, w83977af_interrupt, 0, dev->name, 
1202                         (void *) dev)) {
1203                 return -EAGAIN;
1204         }
1205         /*
1206          * Always allocate the DMA channel after the IRQ,
1207          * and clean up on failure.
1208          */
1209         if (request_dma(self->io.dma, dev->name)) {
1210                 free_irq(self->io.irq, self);
1211                 return -EAGAIN;
1212         }
1213                 
1214         /* Save current set */
1215         set = inb(iobase+SSR);
1216
1217         /* Enable some interrupts so we can receive frames again */
1218         switch_bank(iobase, SET0);
1219         if (self->io.speed > 115200) {
1220                 outb(ICR_EFSFI, iobase+ICR);
1221                 w83977af_dma_receive(self);
1222         } else
1223                 outb(ICR_ERBRI, iobase+ICR);
1224
1225         /* Restore bank register */
1226         outb(set, iobase+SSR);
1227
1228         /* Ready to play! */
1229         netif_start_queue(dev);
1230         
1231         /* Give self a hardware name */
1232         sprintf(hwname, "w83977af @ 0x%03x", self->io.fir_base);
1233
1234         /* 
1235          * Open new IrLAP layer instance, now that everything should be
1236          * initialized properly 
1237          */
1238         self->irlap = irlap_open(dev, &self->qos, hwname);
1239
1240         return 0;
1241 }
1242
1243 /*
1244  * Function w83977af_net_close (dev)
1245  *
1246  *    Stop the device
1247  *
1248  */
1249 static int w83977af_net_close(struct net_device *dev)
1250 {
1251         struct w83977af_ir *self;
1252         int iobase;
1253         __u8 set;
1254
1255         IRDA_DEBUG(0, "%s()\n", __func__ );
1256
1257         IRDA_ASSERT(dev != NULL, return -1;);
1258         
1259         self = netdev_priv(dev);
1260         
1261         IRDA_ASSERT(self != NULL, return 0;);
1262         
1263         iobase = self->io.fir_base;
1264
1265         /* Stop device */
1266         netif_stop_queue(dev);
1267         
1268         /* Stop and remove instance of IrLAP */
1269         if (self->irlap)
1270                 irlap_close(self->irlap);
1271         self->irlap = NULL;
1272
1273         disable_dma(self->io.dma);
1274
1275         /* Save current set */
1276         set = inb(iobase+SSR);
1277         
1278         /* Disable interrupts */
1279         switch_bank(iobase, SET0);
1280         outb(0, iobase+ICR); 
1281
1282         free_irq(self->io.irq, dev);
1283         free_dma(self->io.dma);
1284
1285         /* Restore bank register */
1286         outb(set, iobase+SSR);
1287
1288         return 0;
1289 }
1290
1291 /*
1292  * Function w83977af_net_ioctl (dev, rq, cmd)
1293  *
1294  *    Process IOCTL commands for this device
1295  *
1296  */
1297 static int w83977af_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1298 {
1299         struct if_irda_req *irq = (struct if_irda_req *) rq;
1300         struct w83977af_ir *self;
1301         unsigned long flags;
1302         int ret = 0;
1303
1304         IRDA_ASSERT(dev != NULL, return -1;);
1305
1306         self = netdev_priv(dev);
1307
1308         IRDA_ASSERT(self != NULL, return -1;);
1309
1310         IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
1311         
1312         spin_lock_irqsave(&self->lock, flags);
1313
1314         switch (cmd) {
1315         case SIOCSBANDWIDTH: /* Set bandwidth */
1316                 if (!capable(CAP_NET_ADMIN)) {
1317                         ret = -EPERM;
1318                         goto out;
1319                 }
1320                 w83977af_change_speed(self, irq->ifr_baudrate);
1321                 break;
1322         case SIOCSMEDIABUSY: /* Set media busy */
1323                 if (!capable(CAP_NET_ADMIN)) {
1324                         ret = -EPERM;
1325                         goto out;
1326                 }
1327                 irda_device_set_media_busy(self->netdev, TRUE);
1328                 break;
1329         case SIOCGRECEIVING: /* Check if we are receiving right now */
1330                 irq->ifr_receiving = w83977af_is_receiving(self);
1331                 break;
1332         default:
1333                 ret = -EOPNOTSUPP;
1334         }
1335 out:
1336         spin_unlock_irqrestore(&self->lock, flags);
1337         return ret;
1338 }
1339
1340 MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
1341 MODULE_DESCRIPTION("Winbond W83977AF IrDA Device Driver");
1342 MODULE_LICENSE("GPL");
1343
1344
1345 module_param(qos_mtt_bits, int, 0);
1346 MODULE_PARM_DESC(qos_mtt_bits, "Mimimum Turn Time");
1347 module_param_array(io, int, NULL, 0);
1348 MODULE_PARM_DESC(io, "Base I/O addresses");
1349 module_param_array(irq, int, NULL, 0);
1350 MODULE_PARM_DESC(irq, "IRQ lines");
1351
1352 /*
1353  * Function init_module (void)
1354  *
1355  *    
1356  *
1357  */
1358 module_init(w83977af_init);
1359
1360 /*
1361  * Function cleanup_module (void)
1362  *
1363  *    
1364  *
1365  */
1366 module_exit(w83977af_cleanup);