git.oblomov.eu Git - linux-2.6/blob - drivers/media/video/cpia_pp.c

   1 /*
   2  * cpia_pp CPiA Parallel Port driver
   3  *
   4  * Supports CPiA based parallel port Video Camera's.
   5  *
   6  * (C) Copyright 1999 Bas Huisman <bhuism@cs.utwente.nl>
   7  * (C) Copyright 1999-2000 Scott J. Bertin <sbertin@securenym.net>,
   8  * (C) Copyright 1999-2000 Peter Pregler <Peter_Pregler@email.com>
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or
  13  * (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23  */
  24
  25 /* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
  26 /* #define _CPIA_DEBUG_  1 */
  27
  28 #include <linux/config.h>
  29
  30 #include <linux/module.h>
  31 #include <linux/init.h>
  32
  33 #include <linux/kernel.h>
  34 #include <linux/parport.h>
  35 #include <linux/interrupt.h>
  36 #include <linux/delay.h>
  37 #include <linux/workqueue.h>
  38 #include <linux/smp_lock.h>
  39 #include <linux/sched.h>
  40
  41 #include <linux/kmod.h>
  42
  43 /* #define _CPIA_DEBUG_         define for verbose debug output */
  44 #include "cpia.h"
  45
  46 static int cpia_pp_open(void *privdata);
  47 static int cpia_pp_registerCallback(void *privdata, void (*cb) (void *cbdata),
  48                                     void *cbdata);
  49 static int cpia_pp_transferCmd(void *privdata, u8 *command, u8 *data);
  50 static int cpia_pp_streamStart(void *privdata);
  51 static int cpia_pp_streamStop(void *privdata);
  52 static int cpia_pp_streamRead(void *privdata, u8 *buffer, int noblock);
  53 static int cpia_pp_close(void *privdata);
  54
  55
  56 #define ABOUT "Parallel port driver for Vision CPiA based cameras"
  57
  58 #define PACKET_LENGTH  8
  59
  60 /* Magic numbers for defining port-device mappings */
  61 #define PPCPIA_PARPORT_UNSPEC -4
  62 #define PPCPIA_PARPORT_AUTO -3
  63 #define PPCPIA_PARPORT_OFF -2
  64 #define PPCPIA_PARPORT_NONE -1
  65
  66 #ifdef MODULE
  67 static int parport_nr[PARPORT_MAX] = {[0 ... PARPORT_MAX - 1] = PPCPIA_PARPORT_UNSPEC};
  68 static char *parport[PARPORT_MAX] = {NULL,};
  69
  70 MODULE_AUTHOR("B. Huisman <bhuism@cs.utwente.nl> & Peter Pregler <Peter_Pregler@email.com>");
  71 MODULE_DESCRIPTION("Parallel port driver for Vision CPiA based cameras");
  72 MODULE_LICENSE("GPL");
  73
  74 module_param_array(parport, charp, NULL, 0);
  75 MODULE_PARM_DESC(parport, "'auto' or a list of parallel port numbers. Just like lp.");
  76 #else
  77 static int parport_nr[PARPORT_MAX] __initdata =
  78         {[0 ... PARPORT_MAX - 1] = PPCPIA_PARPORT_UNSPEC};
  79 static int parport_ptr = 0;
  80 #endif
  81
  82 struct pp_cam_entry {
  83         struct pardevice *pdev;
  84         struct parport *port;
  85         struct work_struct cb_task;
  86         int open_count;
  87         wait_queue_head_t wq_stream;
  88         /* image state flags */
  89         int image_ready;        /* we got an interrupt */
  90         int image_complete;     /* we have seen 4 EOI */
  91
  92         int streaming; /* we are in streaming mode */
  93         int stream_irq;
  94 };
  95
  96 static struct cpia_camera_ops cpia_pp_ops =
  97 {
  98         cpia_pp_open,
  99         cpia_pp_registerCallback,
 100         cpia_pp_transferCmd,
 101         cpia_pp_streamStart,
 102         cpia_pp_streamStop,
 103         cpia_pp_streamRead,
 104         cpia_pp_close,
 105         1,
 106         THIS_MODULE
 107 };
 108
 109 static LIST_HEAD(cam_list);
 110 static spinlock_t cam_list_lock_pp;
 111
 112 /* FIXME */
 113 static void cpia_parport_enable_irq( struct parport *port ) {
 114         parport_enable_irq(port);
 115         mdelay(10);
 116         return;
 117 }
 118
 119 static void cpia_parport_disable_irq( struct parport *port ) {
 120         parport_disable_irq(port);
 121         mdelay(10);
 122         return;
 123 }
 124
 125 /* Special CPiA PPC modes: These are invoked by using the 1284 Extensibility
 126  * Link Flag during negotiation */
 127 #define UPLOAD_FLAG  0x08
 128 #define NIBBLE_TRANSFER 0x01
 129 #define ECP_TRANSFER 0x03
 130
 131 #define PARPORT_CHUNK_SIZE      PAGE_SIZE
 132
 133
 134 /****************************************************************************
 135  *
 136  *  CPiA-specific  low-level parport functions for nibble uploads
 137  *
 138  ***************************************************************************/
 139 /*  CPiA nonstandard "Nibble" mode (no nDataAvail signal after each byte). */
 140 /* The standard kernel parport_ieee1284_read_nibble() fails with the CPiA... */
 141
 142 static size_t cpia_read_nibble (struct parport *port,
 143                          void *buffer, size_t len,
 144                          int flags)
 145 {
 146         /* adapted verbatim, with one change, from
 147            parport_ieee1284_read_nibble() in drivers/parport/ieee1284-ops.c */
 148
 149         unsigned char *buf = buffer;
 150         int i;
 151         unsigned char byte = 0;
 152
 153         len *= 2; /* in nibbles */
 154         for (i=0; i < len; i++) {
 155                 unsigned char nibble;
 156
 157                 /* The CPiA firmware suppresses the use of nDataAvail (nFault LO)
 158                  * after every second nibble to signal that more
 159                  * data is available.  (the total number of Bytes that
 160                  * should be sent is known; if too few are received, an error
 161                  * will be recorded after a timeout).
 162                  * This is incompatible with parport_ieee1284_read_nibble(),
 163                  * which expects to find nFault LO after every second nibble.
 164                  */
 165
 166                 /* Solution: modify cpia_read_nibble to only check for
 167                  * nDataAvail before the first nibble is sent.
 168                  */
 169
 170                 /* Does the error line indicate end of data? */
 171                 if (((i /*& 1*/) == 0) &&
 172                     (parport_read_status(port) & PARPORT_STATUS_ERROR)) {
 173                         port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
 174                                 DBG("%s: No more nibble data (%d bytes)\n",
 175                                 port->name, i/2);
 176
 177                         /* Go to reverse idle phase. */
 178                         parport_frob_control (port,
 179                                               PARPORT_CONTROL_AUTOFD,
 180                                               PARPORT_CONTROL_AUTOFD);
 181                         port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
 182                         break;
 183                 }
 184
 185                 /* Event 7: Set nAutoFd low. */
 186                 parport_frob_control (port,
 187                                       PARPORT_CONTROL_AUTOFD,
 188                                       PARPORT_CONTROL_AUTOFD);
 189
 190                 /* Event 9: nAck goes low. */
 191                 port->ieee1284.phase = IEEE1284_PH_REV_DATA;
 192                 if (parport_wait_peripheral (port,
 193                                              PARPORT_STATUS_ACK, 0)) {
 194                         /* Timeout -- no more data? */
 195                                  DBG("%s: Nibble timeout at event 9 (%d bytes)\n",
 196                                  port->name, i/2);
 197                         parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
 198                         break;
 199                 }
 200
 201
 202                 /* Read a nibble. */
 203                 nibble = parport_read_status (port) >> 3;
 204                 nibble &= ~8;
 205                 if ((nibble & 0x10) == 0)
 206                         nibble |= 8;
 207                 nibble &= 0xf;
 208
 209                 /* Event 10: Set nAutoFd high. */
 210                 parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
 211
 212                 /* Event 11: nAck goes high. */
 213                 if (parport_wait_peripheral (port,
 214                                              PARPORT_STATUS_ACK,
 215                                              PARPORT_STATUS_ACK)) {
 216                         /* Timeout -- no more data? */
 217                         DBG("%s: Nibble timeout at event 11\n",
 218                                  port->name);
 219                         break;
 220                 }
 221
 222                 if (i & 1) {
 223                         /* Second nibble */
 224                         byte |= nibble << 4;
 225                         *buf++ = byte;
 226                 } else
 227                         byte = nibble;
 228         }
 229
 230         i /= 2; /* i is now in bytes */
 231
 232         if (i == len) {
 233                 /* Read the last nibble without checking data avail. */
 234                 port = port->physport;
 235                 if (parport_read_status (port) & PARPORT_STATUS_ERROR)
 236                         port->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
 237                 else
 238                         port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
 239         }
 240
 241         return i;
 242 }
 243
 244 /* CPiA nonstandard "Nibble Stream" mode (2 nibbles per cycle, instead of 1)
 245  * (See CPiA Data sheet p. 31)
 246  *
 247  * "Nibble Stream" mode used by CPiA for uploads to non-ECP ports is a
 248  * nonstandard variant of nibble mode which allows the same (mediocre)
 249  * data flow of 8 bits per cycle as software-enabled ECP by TRISTATE-capable
 250  * parallel ports, but works also for  non-TRISTATE-capable ports.
 251  * (Standard nibble mode only send 4 bits per cycle)
 252  *
 253  */
 254
 255 static size_t cpia_read_nibble_stream(struct parport *port,
 256                                void *buffer, size_t len,
 257                                int flags)
 258 {
 259         int i;
 260         unsigned char *buf = buffer;
 261         int endseen = 0;
 262
 263         for (i=0; i < len; i++) {
 264                 unsigned char nibble[2], byte = 0;
 265                 int j;
 266
 267                 /* Image Data is complete when 4 consecutive EOI bytes (0xff) are seen */
 268                 if (endseen > 3 )
 269                         break;
 270
 271                 /* Event 7: Set nAutoFd low. */
 272                 parport_frob_control (port,
 273                                       PARPORT_CONTROL_AUTOFD,
 274                                       PARPORT_CONTROL_AUTOFD);
 275
 276                 /* Event 9: nAck goes low. */
 277                 port->ieee1284.phase = IEEE1284_PH_REV_DATA;
 278                 if (parport_wait_peripheral (port,
 279                                              PARPORT_STATUS_ACK, 0)) {
 280                         /* Timeout -- no more data? */
 281                                  DBG("%s: Nibble timeout at event 9 (%d bytes)\n",
 282                                  port->name, i/2);
 283                         parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
 284                         break;
 285                 }
 286
 287                 /* Read lower nibble */
 288                 nibble[0] = parport_read_status (port) >>3;
 289
 290                 /* Event 10: Set nAutoFd high. */
 291                 parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
 292
 293                 /* Event 11: nAck goes high. */
 294                 if (parport_wait_peripheral (port,
 295                                              PARPORT_STATUS_ACK,
 296                                              PARPORT_STATUS_ACK)) {
 297                         /* Timeout -- no more data? */
 298                         DBG("%s: Nibble timeout at event 11\n",
 299                                  port->name);
 300                         break;
 301                 }
 302
 303                 /* Read upper nibble */
 304                 nibble[1] = parport_read_status (port) >>3;
 305
 306                 /* reassemble the byte */
 307                 for (j = 0; j < 2 ; j++ ) {
 308                         nibble[j] &= ~8;
 309                         if ((nibble[j] & 0x10) == 0)
 310                                 nibble[j] |= 8;
 311                         nibble[j] &= 0xf;
 312                 }
 313                 byte = (nibble[0] |(nibble[1] << 4));
 314                 *buf++ = byte;
 315
 316                 if(byte == EOI)
 317                   endseen++;
 318                 else
 319                   endseen = 0;
 320         }
 321         return i;
 322 }
 323
 324 /****************************************************************************
 325  *
 326  *  EndTransferMode
 327  *
 328  ***************************************************************************/
 329 static void EndTransferMode(struct pp_cam_entry *cam)
 330 {
 331         parport_negotiate(cam->port, IEEE1284_MODE_COMPAT);
 332 }
 333
 334 /****************************************************************************
 335  *
 336  *  ForwardSetup
 337  *
 338  ***************************************************************************/
 339 static int ForwardSetup(struct pp_cam_entry *cam)
 340 {
 341         int retry;
 342
 343         /* The CPiA uses ECP protocol for Downloads from the Host to the camera.
 344          * This will be software-emulated if ECP hardware is not present
 345          */
 346
 347         /* the usual camera maximum response time is 10ms, but after receiving
 348          * some commands, it needs up to 40ms. (Data Sheet p. 32)*/
 349
 350         for(retry = 0; retry < 4; ++retry) {
 351                 if(!parport_negotiate(cam->port, IEEE1284_MODE_ECP)) {
 352                         break;
 353                 }
 354                 mdelay(10);
 355         }
 356         if(retry == 4) {
 357                 DBG("Unable to negotiate IEEE1284 ECP Download mode\n");
 358                 return -1;
 359         }
 360         return 0;
 361 }
 362 /****************************************************************************
 363  *
 364  *  ReverseSetup
 365  *
 366  ***************************************************************************/
 367 static int ReverseSetup(struct pp_cam_entry *cam, int extensibility)
 368 {
 369         int retry;
 370         int upload_mode, mode = IEEE1284_MODE_ECP;
 371         int transfer_mode = ECP_TRANSFER;
 372
 373         if (!(cam->port->modes & PARPORT_MODE_ECP) &&
 374              !(cam->port->modes & PARPORT_MODE_TRISTATE)) {
 375                 mode = IEEE1284_MODE_NIBBLE;
 376                 transfer_mode = NIBBLE_TRANSFER;
 377         }
 378
 379         upload_mode = mode;
 380         if(extensibility) mode = UPLOAD_FLAG|transfer_mode|IEEE1284_EXT_LINK;
 381
 382         /* the usual camera maximum response time is 10ms, but after
 383          * receiving some commands, it needs up to 40ms. */
 384
 385         for(retry = 0; retry < 4; ++retry) {
 386                 if(!parport_negotiate(cam->port, mode)) {
 387                         break;
 388                 }
 389                 mdelay(10);
 390         }
 391         if(retry == 4) {
 392                 if(extensibility)
 393                         DBG("Unable to negotiate upload extensibility mode\n");
 394                 else
 395                         DBG("Unable to negotiate upload mode\n");
 396                 return -1;
 397         }
 398         if(extensibility) cam->port->ieee1284.mode = upload_mode;
 399         return 0;
 400 }
 401
 402 /****************************************************************************
 403  *
 404  *  WritePacket
 405  *
 406  ***************************************************************************/
 407 static int WritePacket(struct pp_cam_entry *cam, const u8 *packet, size_t size)
 408 {
 409         int retval=0;
 410         int size_written;
 411
 412         if (packet == NULL) {
 413                 return -EINVAL;
 414         }
 415         if (ForwardSetup(cam)) {
 416                 DBG("Write failed in setup\n");
 417                 return -EIO;
 418         }
 419         size_written = parport_write(cam->port, packet, size);
 420         if(size_written != size) {
 421                 DBG("Write failed, wrote %d/%d\n", size_written, size);
 422                 retval = -EIO;
 423         }
 424         EndTransferMode(cam);
 425         return retval;
 426 }
 427
 428 /****************************************************************************
 429  *
 430  *  ReadPacket
 431  *
 432  ***************************************************************************/
 433 static int ReadPacket(struct pp_cam_entry *cam, u8 *packet, size_t size)
 434 {
 435         int retval=0;
 436
 437         if (packet == NULL) {
 438                 return -EINVAL;
 439         }
 440         if (ReverseSetup(cam, 0)) {
 441                 return -EIO;
 442         }
 443
 444         /* support for CPiA variant nibble reads */
 445         if(cam->port->ieee1284.mode == IEEE1284_MODE_NIBBLE) {
 446                 if(cpia_read_nibble(cam->port, packet, size, 0) != size)
 447                         retval = -EIO;
 448         } else {
 449                 if(parport_read(cam->port, packet, size) != size)
 450                         retval = -EIO;
 451         }
 452         EndTransferMode(cam);
 453         return retval;
 454 }
 455
 456 /****************************************************************************
 457  *
 458  *  cpia_pp_streamStart
 459  *
 460  ***************************************************************************/
 461 static int cpia_pp_streamStart(void *privdata)
 462 {
 463         struct pp_cam_entry *cam = privdata;
 464         DBG("\n");
 465         cam->streaming=1;
 466         cam->image_ready=0;
 467         //if (ReverseSetup(cam,1)) return -EIO;
 468         if(cam->stream_irq) cpia_parport_enable_irq(cam->port);
 469         return 0;
 470 }
 471
 472 /****************************************************************************
 473  *
 474  *  cpia_pp_streamStop
 475  *
 476  ***************************************************************************/
 477 static int cpia_pp_streamStop(void *privdata)
 478 {
 479         struct pp_cam_entry *cam = privdata;
 480
 481         DBG("\n");
 482         cam->streaming=0;
 483         cpia_parport_disable_irq(cam->port);
 484         //EndTransferMode(cam);
 485
 486         return 0;
 487 }
 488
 489 /****************************************************************************
 490  *
 491  *  cpia_pp_streamRead
 492  *
 493  ***************************************************************************/
 494 static int cpia_pp_read(struct parport *port, u8 *buffer, int len)
 495 {
 496         int bytes_read;
 497
 498         /* support for CPiA variant "nibble stream" reads */
 499         if(port->ieee1284.mode == IEEE1284_MODE_NIBBLE)
 500                 bytes_read = cpia_read_nibble_stream(port,buffer,len,0);
 501         else {
 502                 int new_bytes;
 503                 for(bytes_read=0; bytes_read<len; bytes_read += new_bytes) {
 504                         new_bytes = parport_read(port, buffer+bytes_read,
 505                                                  len-bytes_read);
 506                         if(new_bytes < 0) break;
 507                 }
 508         }
 509         return bytes_read;
 510 }
 511
 512 static int cpia_pp_streamRead(void *privdata, u8 *buffer, int noblock)
 513 {
 514         struct pp_cam_entry *cam = privdata;
 515         int read_bytes = 0;
 516         int i, endseen, block_size, new_bytes;
 517
 518         if(cam == NULL) {
 519                 DBG("Internal driver error: cam is NULL\n");
 520                 return -EINVAL;
 521         }
 522         if(buffer == NULL) {
 523                 DBG("Internal driver error: buffer is NULL\n");
 524                 return -EINVAL;
 525         }
 526         //if(cam->streaming) DBG("%d / %d\n", cam->image_ready, noblock);
 527         if( cam->stream_irq ) {
 528                 DBG("%d\n", cam->image_ready);
 529                 cam->image_ready--;
 530         }
 531         cam->image_complete=0;
 532         if (0/*cam->streaming*/) {
 533                 if(!cam->image_ready) {
 534                         if(noblock) return -EWOULDBLOCK;
 535                         interruptible_sleep_on(&cam->wq_stream);
 536                         if( signal_pending(current) ) return -EINTR;
 537                         DBG("%d\n", cam->image_ready);
 538                 }
 539         } else {
 540                 if (ReverseSetup(cam, 1)) {
 541                         DBG("unable to ReverseSetup\n");
 542                         return -EIO;
 543                 }
 544         }
 545         endseen = 0;
 546         block_size = PARPORT_CHUNK_SIZE;
 547         while( !cam->image_complete ) {
 548                 cond_resched();
 549
 550                 new_bytes = cpia_pp_read(cam->port, buffer, block_size );
 551                 if( new_bytes <= 0 ) {
 552                         break;
 553                 }
 554                 i=-1;
 555                 while(++i<new_bytes && endseen<4) {
 556                         if(*buffer==EOI) {
 557                                 endseen++;
 558                         } else {
 559                                 endseen=0;
 560                         }
 561                         buffer++;
 562                 }
 563                 read_bytes += i;
 564                 if( endseen==4 ) {
 565                         cam->image_complete=1;
 566                         break;
 567                 }
 568                 if( CPIA_MAX_IMAGE_SIZE-read_bytes <= PARPORT_CHUNK_SIZE ) {
 569                         block_size=CPIA_MAX_IMAGE_SIZE-read_bytes;
 570                 }
 571         }
 572         EndTransferMode(cam);
 573         return cam->image_complete ? read_bytes : -EIO;
 574 }
 575 /****************************************************************************
 576  *
 577  *  cpia_pp_transferCmd
 578  *
 579  ***************************************************************************/
 580 static int cpia_pp_transferCmd(void *privdata, u8 *command, u8 *data)
 581 {
 582         int err;
 583         int retval=0;
 584         int databytes;
 585         struct pp_cam_entry *cam = privdata;
 586
 587         if(cam == NULL) {
 588                 DBG("Internal driver error: cam is NULL\n");
 589                 return -EINVAL;
 590         }
 591         if(command == NULL) {
 592                 DBG("Internal driver error: command is NULL\n");
 593                 return -EINVAL;
 594         }
 595         databytes = (((int)command[7])<<8) | command[6];
 596         if ((err = WritePacket(cam, command, PACKET_LENGTH)) < 0) {
 597                 DBG("Error writing command\n");
 598                 return err;
 599         }
 600         if(command[0] == DATA_IN) {
 601                 u8 buffer[8];
 602                 if(data == NULL) {
 603                         DBG("Internal driver error: data is NULL\n");
 604                         return -EINVAL;
 605                 }
 606                 if((err = ReadPacket(cam, buffer, 8)) < 0) {
 607                         DBG("Error reading command result\n");
 608                        return err;
 609                 }
 610                 memcpy(data, buffer, databytes);
 611         } else if(command[0] == DATA_OUT) {
 612                 if(databytes > 0) {
 613                         if(data == NULL) {
 614                                 DBG("Internal driver error: data is NULL\n");
 615                                 retval = -EINVAL;
 616                         } else {
 617                                 if((err=WritePacket(cam, data, databytes)) < 0){
 618                                         DBG("Error writing command data\n");
 619                                         return err;
 620                                 }
 621                         }
 622                 }
 623         } else {
 624                 DBG("Unexpected first byte of command: %x\n", command[0]);
 625                 retval = -EINVAL;
 626         }
 627         return retval;
 628 }
 629
 630 /****************************************************************************
 631  *
 632  *  cpia_pp_open
 633  *
 634  ***************************************************************************/
 635 static int cpia_pp_open(void *privdata)
 636 {
 637         struct pp_cam_entry *cam = (struct pp_cam_entry *)privdata;
 638
 639         if (cam == NULL)
 640                 return -EINVAL;
 641
 642         if(cam->open_count == 0) {
 643                 if (parport_claim(cam->pdev)) {
 644                         DBG("failed to claim the port\n");
 645                         return -EBUSY;
 646                 }
 647                 parport_negotiate(cam->port, IEEE1284_MODE_COMPAT);
 648                 parport_data_forward(cam->port);
 649                 parport_write_control(cam->port, PARPORT_CONTROL_SELECT);
 650                 udelay(50);
 651                 parport_write_control(cam->port,
 652                                       PARPORT_CONTROL_SELECT
 653                                       | PARPORT_CONTROL_INIT);
 654         }
 655
 656         ++cam->open_count;
 657
 658         return 0;
 659 }
 660
 661 /****************************************************************************
 662  *
 663  *  cpia_pp_registerCallback
 664  *
 665  ***************************************************************************/
 666 static int cpia_pp_registerCallback(void *privdata, void (*cb)(void *cbdata), void *cbdata)
 667 {
 668         struct pp_cam_entry *cam = privdata;
 669         int retval = 0;
 670
 671         if(cam->port->irq != PARPORT_IRQ_NONE) {
 672                 INIT_WORK(&cam->cb_task, cb, cbdata);
 673         } else {
 674                 retval = -1;
 675         }
 676         return retval;
 677 }
 678
 679 /****************************************************************************
 680  *
 681  *  cpia_pp_close
 682  *
 683  ***************************************************************************/
 684 static int cpia_pp_close(void *privdata)
 685 {
 686         struct pp_cam_entry *cam = privdata;
 687         if (--cam->open_count == 0) {
 688                 parport_release(cam->pdev);
 689         }
 690         return 0;
 691 }
 692
 693 /****************************************************************************
 694  *
 695  *  cpia_pp_register
 696  *
 697  ***************************************************************************/
 698 static int cpia_pp_register(struct parport *port)
 699 {
 700         struct pardevice *pdev = NULL;
 701         struct pp_cam_entry *cam;
 702         struct cam_data *cpia;
 703
 704         if (!(port->modes & PARPORT_MODE_PCSPP)) {
 705                 LOG("port is not supported by CPiA driver\n");
 706                 return -ENXIO;
 707         }
 708
 709         cam = kmalloc(sizeof(struct pp_cam_entry), GFP_KERNEL);
 710         if (cam == NULL) {
 711                 LOG("failed to allocate camera structure\n");
 712                 return -ENOMEM;
 713         }
 714         memset(cam,0,sizeof(struct pp_cam_entry));
 715
 716         pdev = parport_register_device(port, "cpia_pp", NULL, NULL,
 717                                        NULL, 0, cam);
 718
 719         if (!pdev) {
 720                 LOG("failed to parport_register_device\n");
 721                 kfree(cam);
 722                 return -ENXIO;
 723         }
 724
 725         cam->pdev = pdev;
 726         cam->port = port;
 727         init_waitqueue_head(&cam->wq_stream);
 728
 729         cam->streaming = 0;
 730         cam->stream_irq = 0;
 731
 732         if((cpia = cpia_register_camera(&cpia_pp_ops, cam)) == NULL) {
 733                 LOG("failed to cpia_register_camera\n");
 734                 parport_unregister_device(pdev);
 735                 kfree(cam);
 736                 return -ENXIO;
 737         }
 738         spin_lock( &cam_list_lock_pp );
 739         list_add( &cpia->cam_data_list, &cam_list );
 740         spin_unlock( &cam_list_lock_pp );
 741
 742         return 0;
 743 }
 744
 745 static void cpia_pp_detach (struct parport *port)
 746 {
 747         struct list_head *tmp;
 748         struct cam_data *cpia = NULL;
 749         struct pp_cam_entry *cam;
 750
 751         spin_lock( &cam_list_lock_pp );
 752         list_for_each (tmp, &cam_list) {
 753                 cpia = list_entry(tmp, struct cam_data, cam_data_list);
 754                 cam = (struct pp_cam_entry *) cpia->lowlevel_data;
 755                 if (cam && cam->port->number == port->number) {
 756                         list_del(&cpia->cam_data_list);
 757                         break;
 758                 }
 759                 cpia = NULL;
 760         }
 761         spin_unlock( &cam_list_lock_pp );
 762
 763         if (!cpia) {
 764                 DBG("cpia_pp_detach failed to find cam_data in cam_list\n");
 765                 return;
 766         }
 767
 768         cam = (struct pp_cam_entry *) cpia->lowlevel_data;
 769         cpia_unregister_camera(cpia);
 770         if(cam->open_count > 0)
 771                 cpia_pp_close(cam);
 772         parport_unregister_device(cam->pdev);
 773         cpia->lowlevel_data = NULL;
 774         kfree(cam);
 775 }
 776
 777 static void cpia_pp_attach (struct parport *port)
 778 {
 779         unsigned int i;
 780
 781         switch (parport_nr[0])
 782         {
 783         case PPCPIA_PARPORT_UNSPEC:
 784         case PPCPIA_PARPORT_AUTO:
 785                 if (port->probe_info[0].class != PARPORT_CLASS_MEDIA ||
 786                     port->probe_info[0].cmdset == NULL ||
 787                     strncmp(port->probe_info[0].cmdset, "CPIA_1", 6) != 0)
 788                         return;
 789
 790                 cpia_pp_register(port);
 791
 792                 break;
 793
 794         default:
 795                 for (i = 0; i < PARPORT_MAX; ++i) {
 796                         if (port->number == parport_nr[i]) {
 797                                 cpia_pp_register(port);
 798                                 break;
 799                         }
 800                 }
 801                 break;
 802         }
 803 }
 804
 805 static struct parport_driver cpia_pp_driver = {
 806         .name = "cpia_pp",
 807         .attach = cpia_pp_attach,
 808         .detach = cpia_pp_detach,
 809 };
 810
 811 int cpia_pp_init(void)
 812 {
 813         printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT,
 814                CPIA_PP_MAJ_VER,CPIA_PP_MIN_VER,CPIA_PP_PATCH_VER);
 815
 816         if(parport_nr[0] == PPCPIA_PARPORT_OFF) {
 817                 printk("  disabled\n");
 818                 return 0;
 819         }
 820
 821         spin_lock_init( &cam_list_lock_pp );
 822
 823         if (parport_register_driver (&cpia_pp_driver)) {
 824                 LOG ("unable to register with parport\n");
 825                 return -EIO;
 826         }
 827         return 0;
 828 }
 829
 830 #ifdef MODULE
 831 int init_module(void)
 832 {
 833         if (parport[0]) {
 834                 /* The user gave some parameters.  Let's see what they were. */
 835                 if (!strncmp(parport[0], "auto", 4)) {
 836                         parport_nr[0] = PPCPIA_PARPORT_AUTO;
 837                 } else {
 838                         int n;
 839                         for (n = 0; n < PARPORT_MAX && parport[n]; n++) {
 840                                 if (!strncmp(parport[n], "none", 4)) {
 841                                         parport_nr[n] = PPCPIA_PARPORT_NONE;
 842                                 } else {
 843                                         char *ep;
 844                                         unsigned long r = simple_strtoul(parport[n], &ep, 0);
 845                                         if (ep != parport[n]) {
 846                                                 parport_nr[n] = r;
 847                                         } else {
 848                                                 LOG("bad port specifier `%s'\n", parport[n]);
 849                                                 return -ENODEV;
 850                                         }
 851                                 }
 852                         }
 853                 }
 854         }
 855         return cpia_pp_init();
 856 }
 857
 858 void cleanup_module(void)
 859 {
 860         parport_unregister_driver (&cpia_pp_driver);
 861         return;
 862 }
 863
 864 #else /* !MODULE */
 865
 866 static int __init cpia_pp_setup(char *str)
 867 {
 868         if (!strncmp(str, "parport", 7)) {
 869                 int n = simple_strtoul(str + 7, NULL, 10);
 870                 if (parport_ptr < PARPORT_MAX) {
 871                         parport_nr[parport_ptr++] = n;
 872                 } else {
 873                         LOG("too many ports, %s ignored.\n", str);
 874                 }
 875         } else if (!strcmp(str, "auto")) {
 876                 parport_nr[0] = PPCPIA_PARPORT_AUTO;
 877         } else if (!strcmp(str, "none")) {
 878                 parport_nr[parport_ptr++] = PPCPIA_PARPORT_NONE;
 879         }
 880
 881         return 0;
 882 }
 883
 884 __setup("cpia_pp=", cpia_pp_setup);
 885
 886 #endif /* !MODULE */