git.oblomov.eu Git - linux-2.6/blob - arch/x86/kernel/io_apic_32.c

   1 /*
   2  *      Intel IO-APIC support for multi-Pentium hosts.
   3  *
   4  *      Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
   5  *
   6  *      Many thanks to Stig Venaas for trying out countless experimental
   7  *      patches and reporting/debugging problems patiently!
   8  *
   9  *      (c) 1999, Multiple IO-APIC support, developed by
  10  *      Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
  11  *      Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
  12  *      further tested and cleaned up by Zach Brown <zab@redhat.com>
  13  *      and Ingo Molnar <mingo@redhat.com>
  14  *
  15  *      Fixes
  16  *      Maciej W. Rozycki       :       Bits for genuine 82489DX APICs;
  17  *                                      thanks to Eric Gilmore
  18  *                                      and Rolf G. Tews
  19  *                                      for testing these extensively
  20  *      Paul Diefenbaugh        :       Added full ACPI support
  21  */
  22
  23 #include <linux/mm.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/init.h>
  26 #include <linux/delay.h>
  27 #include <linux/sched.h>
  28 #include <linux/mc146818rtc.h>
  29 #include <linux/compiler.h>
  30 #include <linux/acpi.h>
  31 #include <linux/module.h>
  32 #include <linux/sysdev.h>
  33 #include <linux/pci.h>
  34 #include <linux/msi.h>
  35 #include <linux/htirq.h>
  36 #include <linux/freezer.h>
  37 #include <linux/kthread.h>
  38 #include <linux/jiffies.h>      /* time_after() */
  39
  40 #include <asm/io.h>
  41 #include <asm/smp.h>
  42 #include <asm/desc.h>
  43 #include <asm/timer.h>
  44 #include <asm/i8259.h>
  45 #include <asm/nmi.h>
  46 #include <asm/msidef.h>
  47 #include <asm/hypertransport.h>
  48
  49 #include <mach_apic.h>
  50 #include <mach_apicdef.h>
  51
  52 int (*ioapic_renumber_irq)(int ioapic, int irq);
  53 atomic_t irq_mis_count;
  54
  55 /* Where if anywhere is the i8259 connect in external int mode */
  56 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
  57
  58 static DEFINE_SPINLOCK(ioapic_lock);
  59 static DEFINE_SPINLOCK(vector_lock);
  60
  61 int timer_over_8254 __initdata = 1;
  62
  63 /*
  64  *      Is the SiS APIC rmw bug present ?
  65  *      -1 = don't know, 0 = no, 1 = yes
  66  */
  67 int sis_apic_bug = -1;
  68
  69 /*
  70  * # of IRQ routing registers
  71  */
  72 int nr_ioapic_registers[MAX_IO_APICS];
  73
  74 /* I/O APIC entries */
  75 struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
  76 int nr_ioapics;
  77
  78 /* MP IRQ source entries */
  79 struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
  80
  81 /* # of MP IRQ source entries */
  82 int mp_irq_entries;
  83
  84 static int disable_timer_pin_1 __initdata;
  85
  86 /*
  87  * Rough estimation of how many shared IRQs there are, can
  88  * be changed anytime.
  89  */
  90 #define MAX_PLUS_SHARED_IRQS NR_IRQS
  91 #define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
  92
  93 /*
  94  * This is performance-critical, we want to do it O(1)
  95  *
  96  * the indexing order of this array favors 1:1 mappings
  97  * between pins and IRQs.
  98  */
  99
 100 static struct irq_pin_list {
 101         int apic, pin, next;
 102 } irq_2_pin[PIN_MAP_SIZE];
 103
 104 struct io_apic {
 105         unsigned int index;
 106         unsigned int unused[3];
 107         unsigned int data;
 108 };
 109
 110 static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
 111 {
 112         return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
 113                 + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
 114 }
 115
 116 static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
 117 {
 118         struct io_apic __iomem *io_apic = io_apic_base(apic);
 119         writel(reg, &io_apic->index);
 120         return readl(&io_apic->data);
 121 }
 122
 123 static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
 124 {
 125         struct io_apic __iomem *io_apic = io_apic_base(apic);
 126         writel(reg, &io_apic->index);
 127         writel(value, &io_apic->data);
 128 }
 129
 130 /*
 131  * Re-write a value: to be used for read-modify-write
 132  * cycles where the read already set up the index register.
 133  *
 134  * Older SiS APIC requires we rewrite the index register
 135  */
 136 static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
 137 {
 138         volatile struct io_apic __iomem *io_apic = io_apic_base(apic);
 139         if (sis_apic_bug)
 140                 writel(reg, &io_apic->index);
 141         writel(value, &io_apic->data);
 142 }
 143
 144 union entry_union {
 145         struct { u32 w1, w2; };
 146         struct IO_APIC_route_entry entry;
 147 };
 148
 149 static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
 150 {
 151         union entry_union eu;
 152         unsigned long flags;
 153         spin_lock_irqsave(&ioapic_lock, flags);
 154         eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
 155         eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
 156         spin_unlock_irqrestore(&ioapic_lock, flags);
 157         return eu.entry;
 158 }
 159
 160 /*
 161  * When we write a new IO APIC routing entry, we need to write the high
 162  * word first! If the mask bit in the low word is clear, we will enable
 163  * the interrupt, and we need to make sure the entry is fully populated
 164  * before that happens.
 165  */
 166 static void
 167 __ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
 168 {
 169         union entry_union eu;
 170         eu.entry = e;
 171         io_apic_write(apic, 0x11 + 2*pin, eu.w2);
 172         io_apic_write(apic, 0x10 + 2*pin, eu.w1);
 173 }
 174
 175 static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
 176 {
 177         unsigned long flags;
 178         spin_lock_irqsave(&ioapic_lock, flags);
 179         __ioapic_write_entry(apic, pin, e);
 180         spin_unlock_irqrestore(&ioapic_lock, flags);
 181 }
 182
 183 /*
 184  * When we mask an IO APIC routing entry, we need to write the low
 185  * word first, in order to set the mask bit before we change the
 186  * high bits!
 187  */
 188 static void ioapic_mask_entry(int apic, int pin)
 189 {
 190         unsigned long flags;
 191         union entry_union eu = { .entry.mask = 1 };
 192
 193         spin_lock_irqsave(&ioapic_lock, flags);
 194         io_apic_write(apic, 0x10 + 2*pin, eu.w1);
 195         io_apic_write(apic, 0x11 + 2*pin, eu.w2);
 196         spin_unlock_irqrestore(&ioapic_lock, flags);
 197 }
 198
 199 /*
 200  * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
 201  * shared ISA-space IRQs, so we have to support them. We are super
 202  * fast in the common case, and fast for shared ISA-space IRQs.
 203  */
 204 static void add_pin_to_irq(unsigned int irq, int apic, int pin)
 205 {
 206         static int first_free_entry = NR_IRQS;
 207         struct irq_pin_list *entry = irq_2_pin + irq;
 208
 209         while (entry->next)
 210                 entry = irq_2_pin + entry->next;
 211
 212         if (entry->pin != -1) {
 213                 entry->next = first_free_entry;
 214                 entry = irq_2_pin + entry->next;
 215                 if (++first_free_entry >= PIN_MAP_SIZE)
 216                         panic("io_apic.c: whoops");
 217         }
 218         entry->apic = apic;
 219         entry->pin = pin;
 220 }
 221
 222 /*
 223  * Reroute an IRQ to a different pin.
 224  */
 225 static void __init replace_pin_at_irq(unsigned int irq,
 226                                       int oldapic, int oldpin,
 227                                       int newapic, int newpin)
 228 {
 229         struct irq_pin_list *entry = irq_2_pin + irq;
 230
 231         while (1) {
 232                 if (entry->apic == oldapic && entry->pin == oldpin) {
 233                         entry->apic = newapic;
 234                         entry->pin = newpin;
 235                 }
 236                 if (!entry->next)
 237                         break;
 238                 entry = irq_2_pin + entry->next;
 239         }
 240 }
 241
 242 static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable)
 243 {
 244         struct irq_pin_list *entry = irq_2_pin + irq;
 245         unsigned int pin, reg;
 246
 247         for (;;) {
 248                 pin = entry->pin;
 249                 if (pin == -1)
 250                         break;
 251                 reg = io_apic_read(entry->apic, 0x10 + pin*2);
 252                 reg &= ~disable;
 253                 reg |= enable;
 254                 io_apic_modify(entry->apic, 0x10 + pin*2, reg);
 255                 if (!entry->next)
 256                         break;
 257                 entry = irq_2_pin + entry->next;
 258         }
 259 }
 260
 261 /* mask = 1 */
 262 static void __mask_IO_APIC_irq (unsigned int irq)
 263 {
 264         __modify_IO_APIC_irq(irq, 0x00010000, 0);
 265 }
 266
 267 /* mask = 0 */
 268 static void __unmask_IO_APIC_irq (unsigned int irq)
 269 {
 270         __modify_IO_APIC_irq(irq, 0, 0x00010000);
 271 }
 272
 273 /* mask = 1, trigger = 0 */
 274 static void __mask_and_edge_IO_APIC_irq (unsigned int irq)
 275 {
 276         __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000);
 277 }
 278
 279 /* mask = 0, trigger = 1 */
 280 static void __unmask_and_level_IO_APIC_irq (unsigned int irq)
 281 {
 282         __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000);
 283 }
 284
 285 static void mask_IO_APIC_irq (unsigned int irq)
 286 {
 287         unsigned long flags;
 288
 289         spin_lock_irqsave(&ioapic_lock, flags);
 290         __mask_IO_APIC_irq(irq);
 291         spin_unlock_irqrestore(&ioapic_lock, flags);
 292 }
 293
 294 static void unmask_IO_APIC_irq (unsigned int irq)
 295 {
 296         unsigned long flags;
 297
 298         spin_lock_irqsave(&ioapic_lock, flags);
 299         __unmask_IO_APIC_irq(irq);
 300         spin_unlock_irqrestore(&ioapic_lock, flags);
 301 }
 302
 303 static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
 304 {
 305         struct IO_APIC_route_entry entry;
 306
 307         /* Check delivery_mode to be sure we're not clearing an SMI pin */
 308         entry = ioapic_read_entry(apic, pin);
 309         if (entry.delivery_mode == dest_SMI)
 310                 return;
 311
 312         /*
 313          * Disable it in the IO-APIC irq-routing table:
 314          */
 315         ioapic_mask_entry(apic, pin);
 316 }
 317
 318 static void clear_IO_APIC (void)
 319 {
 320         int apic, pin;
 321
 322         for (apic = 0; apic < nr_ioapics; apic++)
 323                 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
 324                         clear_IO_APIC_pin(apic, pin);
 325 }
 326
 327 #ifdef CONFIG_SMP
 328 static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
 329 {
 330         unsigned long flags;
 331         int pin;
 332         struct irq_pin_list *entry = irq_2_pin + irq;
 333         unsigned int apicid_value;
 334         cpumask_t tmp;
 335
 336         cpus_and(tmp, cpumask, cpu_online_map);
 337         if (cpus_empty(tmp))
 338                 tmp = TARGET_CPUS;
 339
 340         cpus_and(cpumask, tmp, CPU_MASK_ALL);
 341
 342         apicid_value = cpu_mask_to_apicid(cpumask);
 343         /* Prepare to do the io_apic_write */
 344         apicid_value = apicid_value << 24;
 345         spin_lock_irqsave(&ioapic_lock, flags);
 346         for (;;) {
 347                 pin = entry->pin;
 348                 if (pin == -1)
 349                         break;
 350                 io_apic_write(entry->apic, 0x10 + 1 + pin*2, apicid_value);
 351                 if (!entry->next)
 352                         break;
 353                 entry = irq_2_pin + entry->next;
 354         }
 355         irq_desc[irq].affinity = cpumask;
 356         spin_unlock_irqrestore(&ioapic_lock, flags);
 357 }
 358
 359 #if defined(CONFIG_IRQBALANCE)
 360 # include <asm/processor.h>     /* kernel_thread() */
 361 # include <linux/kernel_stat.h> /* kstat */
 362 # include <linux/slab.h>                /* kmalloc() */
 363 # include <linux/timer.h>
 364
 365 #define IRQBALANCE_CHECK_ARCH -999
 366 #define MAX_BALANCED_IRQ_INTERVAL       (5*HZ)
 367 #define MIN_BALANCED_IRQ_INTERVAL       (HZ/2)
 368 #define BALANCED_IRQ_MORE_DELTA         (HZ/10)
 369 #define BALANCED_IRQ_LESS_DELTA         (HZ)
 370
 371 static int irqbalance_disabled __read_mostly = IRQBALANCE_CHECK_ARCH;
 372 static int physical_balance __read_mostly;
 373 static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL;
 374
 375 static struct irq_cpu_info {
 376         unsigned long * last_irq;
 377         unsigned long * irq_delta;
 378         unsigned long irq;
 379 } irq_cpu_data[NR_CPUS];
 380
 381 #define CPU_IRQ(cpu)            (irq_cpu_data[cpu].irq)
 382 #define LAST_CPU_IRQ(cpu,irq)   (irq_cpu_data[cpu].last_irq[irq])
 383 #define IRQ_DELTA(cpu,irq)      (irq_cpu_data[cpu].irq_delta[irq])
 384
 385 #define IDLE_ENOUGH(cpu,now) \
 386         (idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1))
 387
 388 #define IRQ_ALLOWED(cpu, allowed_mask)  cpu_isset(cpu, allowed_mask)
 389
 390 #define CPU_TO_PACKAGEINDEX(i) (first_cpu(per_cpu(cpu_sibling_map, i)))
 391
 392 static cpumask_t balance_irq_affinity[NR_IRQS] = {
 393         [0 ... NR_IRQS-1] = CPU_MASK_ALL
 394 };
 395
 396 void set_balance_irq_affinity(unsigned int irq, cpumask_t mask)
 397 {
 398         balance_irq_affinity[irq] = mask;
 399 }
 400
 401 static unsigned long move(int curr_cpu, cpumask_t allowed_mask,
 402                         unsigned long now, int direction)
 403 {
 404         int search_idle = 1;
 405         int cpu = curr_cpu;
 406
 407         goto inside;
 408
 409         do {
 410                 if (unlikely(cpu == curr_cpu))
 411                         search_idle = 0;
 412 inside:
 413                 if (direction == 1) {
 414                         cpu++;
 415                         if (cpu >= NR_CPUS)
 416                                 cpu = 0;
 417                 } else {
 418                         cpu--;
 419                         if (cpu == -1)
 420                                 cpu = NR_CPUS-1;
 421                 }
 422         } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) ||
 423                         (search_idle && !IDLE_ENOUGH(cpu,now)));
 424
 425         return cpu;
 426 }
 427
 428 static inline void balance_irq(int cpu, int irq)
 429 {
 430         unsigned long now = jiffies;
 431         cpumask_t allowed_mask;
 432         unsigned int new_cpu;
 433
 434         if (irqbalance_disabled)
 435                 return;
 436
 437         cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]);
 438         new_cpu = move(cpu, allowed_mask, now, 1);
 439         if (cpu != new_cpu) {
 440                 set_pending_irq(irq, cpumask_of_cpu(new_cpu));
 441         }
 442 }
 443
 444 static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold)
 445 {
 446         int i, j;
 447
 448         for_each_online_cpu(i) {
 449                 for (j = 0; j < NR_IRQS; j++) {
 450                         if (!irq_desc[j].action)
 451                                 continue;
 452                         /* Is it a significant load ?  */
 453                         if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) <
 454                                                 useful_load_threshold)
 455                                 continue;
 456                         balance_irq(i, j);
 457                 }
 458         }
 459         balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
 460                 balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);
 461         return;
 462 }
 463
 464 static void do_irq_balance(void)
 465 {
 466         int i, j;
 467         unsigned long max_cpu_irq = 0, min_cpu_irq = (~0);
 468         unsigned long move_this_load = 0;
 469         int max_loaded = 0, min_loaded = 0;
 470         int load;
 471         unsigned long useful_load_threshold = balanced_irq_interval + 10;
 472         int selected_irq;
 473         int tmp_loaded, first_attempt = 1;
 474         unsigned long tmp_cpu_irq;
 475         unsigned long imbalance = 0;
 476         cpumask_t allowed_mask, target_cpu_mask, tmp;
 477
 478         for_each_possible_cpu(i) {
 479                 int package_index;
 480                 CPU_IRQ(i) = 0;
 481                 if (!cpu_online(i))
 482                         continue;
 483                 package_index = CPU_TO_PACKAGEINDEX(i);
 484                 for (j = 0; j < NR_IRQS; j++) {
 485                         unsigned long value_now, delta;
 486                         /* Is this an active IRQ or balancing disabled ? */
 487                         if (!irq_desc[j].action || irq_balancing_disabled(j))
 488                                 continue;
 489                         if ( package_index == i )
 490                                 IRQ_DELTA(package_index,j) = 0;
 491                         /* Determine the total count per processor per IRQ */
 492                         value_now = (unsigned long) kstat_cpu(i).irqs[j];
 493
 494                         /* Determine the activity per processor per IRQ */
 495                         delta = value_now - LAST_CPU_IRQ(i,j);
 496
 497                         /* Update last_cpu_irq[][] for the next time */
 498                         LAST_CPU_IRQ(i,j) = value_now;
 499
 500                         /* Ignore IRQs whose rate is less than the clock */
 501                         if (delta < useful_load_threshold)
 502                                 continue;
 503                         /* update the load for the processor or package total */
 504                         IRQ_DELTA(package_index,j) += delta;
 505
 506                         /* Keep track of the higher numbered sibling as well */
 507                         if (i != package_index)
 508                                 CPU_IRQ(i) += delta;
 509                         /*
 510                          * We have sibling A and sibling B in the package
 511                          *
 512                          * cpu_irq[A] = load for cpu A + load for cpu B
 513                          * cpu_irq[B] = load for cpu B
 514                          */
 515                         CPU_IRQ(package_index) += delta;
 516                 }
 517         }
 518         /* Find the least loaded processor package */
 519         for_each_online_cpu(i) {
 520                 if (i != CPU_TO_PACKAGEINDEX(i))
 521                         continue;
 522                 if (min_cpu_irq > CPU_IRQ(i)) {
 523                         min_cpu_irq = CPU_IRQ(i);
 524                         min_loaded = i;
 525                 }
 526         }
 527         max_cpu_irq = ULONG_MAX;
 528
 529 tryanothercpu:
 530         /* Look for heaviest loaded processor.
 531          * We may come back to get the next heaviest loaded processor.
 532          * Skip processors with trivial loads.
 533          */
 534         tmp_cpu_irq = 0;
 535         tmp_loaded = -1;
 536         for_each_online_cpu(i) {
 537                 if (i != CPU_TO_PACKAGEINDEX(i))
 538                         continue;
 539                 if (max_cpu_irq <= CPU_IRQ(i))
 540                         continue;
 541                 if (tmp_cpu_irq < CPU_IRQ(i)) {
 542                         tmp_cpu_irq = CPU_IRQ(i);
 543                         tmp_loaded = i;
 544                 }
 545         }
 546
 547         if (tmp_loaded == -1) {
 548          /* In the case of small number of heavy interrupt sources,
 549           * loading some of the cpus too much. We use Ingo's original
 550           * approach to rotate them around.
 551           */
 552                 if (!first_attempt && imbalance >= useful_load_threshold) {
 553                         rotate_irqs_among_cpus(useful_load_threshold);
 554                         return;
 555                 }
 556                 goto not_worth_the_effort;
 557         }
 558
 559         first_attempt = 0;              /* heaviest search */
 560         max_cpu_irq = tmp_cpu_irq;      /* load */
 561         max_loaded = tmp_loaded;        /* processor */
 562         imbalance = (max_cpu_irq - min_cpu_irq) / 2;
 563
 564         /* if imbalance is less than approx 10% of max load, then
 565          * observe diminishing returns action. - quit
 566          */
 567         if (imbalance < (max_cpu_irq >> 3))
 568                 goto not_worth_the_effort;
 569
 570 tryanotherirq:
 571         /* if we select an IRQ to move that can't go where we want, then
 572          * see if there is another one to try.
 573          */
 574         move_this_load = 0;
 575         selected_irq = -1;
 576         for (j = 0; j < NR_IRQS; j++) {
 577                 /* Is this an active IRQ? */
 578                 if (!irq_desc[j].action)
 579                         continue;
 580                 if (imbalance <= IRQ_DELTA(max_loaded,j))
 581                         continue;
 582                 /* Try to find the IRQ that is closest to the imbalance
 583                  * without going over.
 584                  */
 585                 if (move_this_load < IRQ_DELTA(max_loaded,j)) {
 586                         move_this_load = IRQ_DELTA(max_loaded,j);
 587                         selected_irq = j;
 588                 }
 589         }
 590         if (selected_irq == -1) {
 591                 goto tryanothercpu;
 592         }
 593
 594         imbalance = move_this_load;
 595
 596         /* For physical_balance case, we accumulated both load
 597          * values in the one of the siblings cpu_irq[],
 598          * to use the same code for physical and logical processors
 599          * as much as possible.
 600          *
 601          * NOTE: the cpu_irq[] array holds the sum of the load for
 602          * sibling A and sibling B in the slot for the lowest numbered
 603          * sibling (A), _AND_ the load for sibling B in the slot for
 604          * the higher numbered sibling.
 605          *
 606          * We seek the least loaded sibling by making the comparison
 607          * (A+B)/2 vs B
 608          */
 609         load = CPU_IRQ(min_loaded) >> 1;
 610         for_each_cpu_mask(j, per_cpu(cpu_sibling_map, min_loaded)) {
 611                 if (load > CPU_IRQ(j)) {
 612                         /* This won't change cpu_sibling_map[min_loaded] */
 613                         load = CPU_IRQ(j);
 614                         min_loaded = j;
 615                 }
 616         }
 617
 618         cpus_and(allowed_mask,
 619                 cpu_online_map,
 620                 balance_irq_affinity[selected_irq]);
 621         target_cpu_mask = cpumask_of_cpu(min_loaded);
 622         cpus_and(tmp, target_cpu_mask, allowed_mask);
 623
 624         if (!cpus_empty(tmp)) {
 625                 /* mark for change destination */
 626                 set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded));
 627
 628                 /* Since we made a change, come back sooner to
 629                  * check for more variation.
 630                  */
 631                 balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
 632                         balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);
 633                 return;
 634         }
 635         goto tryanotherirq;
 636
 637 not_worth_the_effort:
 638         /*
 639          * if we did not find an IRQ to move, then adjust the time interval
 640          * upward
 641          */
 642         balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL,
 643                 balanced_irq_interval + BALANCED_IRQ_MORE_DELTA);
 644         return;
 645 }
 646
 647 static int balanced_irq(void *unused)
 648 {
 649         int i;
 650         unsigned long prev_balance_time = jiffies;
 651         long time_remaining = balanced_irq_interval;
 652
 653         /* push everything to CPU 0 to give us a starting point.  */
 654         for (i = 0 ; i < NR_IRQS ; i++) {
 655                 irq_desc[i].pending_mask = cpumask_of_cpu(0);
 656                 set_pending_irq(i, cpumask_of_cpu(0));
 657         }
 658
 659         set_freezable();
 660         for ( ; ; ) {
 661                 time_remaining = schedule_timeout_interruptible(time_remaining);
 662                 try_to_freeze();
 663                 if (time_after(jiffies,
 664                                 prev_balance_time+balanced_irq_interval)) {
 665                         preempt_disable();
 666                         do_irq_balance();
 667                         prev_balance_time = jiffies;
 668                         time_remaining = balanced_irq_interval;
 669                         preempt_enable();
 670                 }
 671         }
 672         return 0;
 673 }
 674
 675 static int __init balanced_irq_init(void)
 676 {
 677         int i;
 678         struct cpuinfo_x86 *c;
 679         cpumask_t tmp;
 680
 681         cpus_shift_right(tmp, cpu_online_map, 2);
 682         c = &boot_cpu_data;
 683         /* When not overwritten by the command line ask subarchitecture. */
 684         if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH)
 685                 irqbalance_disabled = NO_BALANCE_IRQ;
 686         if (irqbalance_disabled)
 687                 return 0;
 688
 689          /* disable irqbalance completely if there is only one processor online */
 690         if (num_online_cpus() < 2) {
 691                 irqbalance_disabled = 1;
 692                 return 0;
 693         }
 694         /*
 695          * Enable physical balance only if more than 1 physical processor
 696          * is present
 697          */
 698         if (smp_num_siblings > 1 && !cpus_empty(tmp))
 699                 physical_balance = 1;
 700
 701         for_each_online_cpu(i) {
 702                 irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
 703                 irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
 704                 if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) {
 705                         printk(KERN_ERR "balanced_irq_init: out of memory");
 706                         goto failed;
 707                 }
 708                 memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS);
 709                 memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS);
 710         }
 711
 712         printk(KERN_INFO "Starting balanced_irq\n");
 713         if (!IS_ERR(kthread_run(balanced_irq, NULL, "kirqd")))
 714                 return 0;
 715         printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq");
 716 failed:
 717         for_each_possible_cpu(i) {
 718                 kfree(irq_cpu_data[i].irq_delta);
 719                 irq_cpu_data[i].irq_delta = NULL;
 720                 kfree(irq_cpu_data[i].last_irq);
 721                 irq_cpu_data[i].last_irq = NULL;
 722         }
 723         return 0;
 724 }
 725
 726 int __devinit irqbalance_disable(char *str)
 727 {
 728         irqbalance_disabled = 1;
 729         return 1;
 730 }
 731
 732 __setup("noirqbalance", irqbalance_disable);
 733
 734 late_initcall(balanced_irq_init);
 735 #endif /* CONFIG_IRQBALANCE */
 736 #endif /* CONFIG_SMP */
 737
 738 #ifndef CONFIG_SMP
 739 void send_IPI_self(int vector)
 740 {
 741         unsigned int cfg;
 742
 743         /*
 744          * Wait for idle.
 745          */
 746         apic_wait_icr_idle();
 747         cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL;
 748         /*
 749          * Send the IPI. The write to APIC_ICR fires this off.
 750          */
 751         apic_write_around(APIC_ICR, cfg);
 752 }
 753 #endif /* !CONFIG_SMP */
 754
 755
 756 /*
 757  * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
 758  * specific CPU-side IRQs.
 759  */
 760
 761 #define MAX_PIRQS 8
 762 static int pirq_entries [MAX_PIRQS];
 763 static int pirqs_enabled;
 764 int skip_ioapic_setup;
 765
 766 static int __init ioapic_pirq_setup(char *str)
 767 {
 768         int i, max;
 769         int ints[MAX_PIRQS+1];
 770
 771         get_options(str, ARRAY_SIZE(ints), ints);
 772
 773         for (i = 0; i < MAX_PIRQS; i++)
 774                 pirq_entries[i] = -1;
 775
 776         pirqs_enabled = 1;
 777         apic_printk(APIC_VERBOSE, KERN_INFO
 778                         "PIRQ redirection, working around broken MP-BIOS.\n");
 779         max = MAX_PIRQS;
 780         if (ints[0] < MAX_PIRQS)
 781                 max = ints[0];
 782
 783         for (i = 0; i < max; i++) {
 784                 apic_printk(APIC_VERBOSE, KERN_DEBUG
 785                                 "... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
 786                 /*
 787                  * PIRQs are mapped upside down, usually.
 788                  */
 789                 pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
 790         }
 791         return 1;
 792 }
 793
 794 __setup("pirq=", ioapic_pirq_setup);
 795
 796 /*
 797  * Find the IRQ entry number of a certain pin.
 798  */
 799 static int find_irq_entry(int apic, int pin, int type)
 800 {
 801         int i;
 802
 803         for (i = 0; i < mp_irq_entries; i++)
 804                 if (mp_irqs[i].mpc_irqtype == type &&
 805                     (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
 806                      mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
 807                     mp_irqs[i].mpc_dstirq == pin)
 808                         return i;
 809
 810         return -1;
 811 }
 812
 813 /*
 814  * Find the pin to which IRQ[irq] (ISA) is connected
 815  */
 816 static int __init find_isa_irq_pin(int irq, int type)
 817 {
 818         int i;
 819
 820         for (i = 0; i < mp_irq_entries; i++) {
 821                 int lbus = mp_irqs[i].mpc_srcbus;
 822
 823                 if (test_bit(lbus, mp_bus_not_pci) &&
 824                     (mp_irqs[i].mpc_irqtype == type) &&
 825                     (mp_irqs[i].mpc_srcbusirq == irq))
 826
 827                         return mp_irqs[i].mpc_dstirq;
 828         }
 829         return -1;
 830 }
 831
 832 static int __init find_isa_irq_apic(int irq, int type)
 833 {
 834         int i;
 835
 836         for (i = 0; i < mp_irq_entries; i++) {
 837                 int lbus = mp_irqs[i].mpc_srcbus;
 838
 839                 if (test_bit(lbus, mp_bus_not_pci) &&
 840                     (mp_irqs[i].mpc_irqtype == type) &&
 841                     (mp_irqs[i].mpc_srcbusirq == irq))
 842                         break;
 843         }
 844         if (i < mp_irq_entries) {
 845                 int apic;
 846                 for(apic = 0; apic < nr_ioapics; apic++) {
 847                         if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
 848                                 return apic;
 849                 }
 850         }
 851
 852         return -1;
 853 }
 854
 855 /*
 856  * Find a specific PCI IRQ entry.
 857  * Not an __init, possibly needed by modules
 858  */
 859 static int pin_2_irq(int idx, int apic, int pin);
 860
 861 int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 862 {
 863         int apic, i, best_guess = -1;
 864
 865         apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, "
 866                 "slot:%d, pin:%d.\n", bus, slot, pin);
 867         if (mp_bus_id_to_pci_bus[bus] == -1) {
 868                 printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
 869                 return -1;
 870         }
 871         for (i = 0; i < mp_irq_entries; i++) {
 872                 int lbus = mp_irqs[i].mpc_srcbus;
 873
 874                 for (apic = 0; apic < nr_ioapics; apic++)
 875                         if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
 876                             mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
 877                                 break;
 878
 879                 if (!test_bit(lbus, mp_bus_not_pci) &&
 880                     !mp_irqs[i].mpc_irqtype &&
 881                     (bus == lbus) &&
 882                     (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
 883                         int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
 884
 885                         if (!(apic || IO_APIC_IRQ(irq)))
 886                                 continue;
 887
 888                         if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
 889                                 return irq;
 890                         /*
 891                          * Use the first all-but-pin matching entry as a
 892                          * best-guess fuzzy result for broken mptables.
 893                          */
 894                         if (best_guess < 0)
 895                                 best_guess = irq;
 896                 }
 897         }
 898         return best_guess;
 899 }
 900 EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
 901
 902 /*
 903  * This function currently is only a helper for the i386 smp boot process where
 904  * we need to reprogram the ioredtbls to cater for the cpus which have come online
 905  * so mask in all cases should simply be TARGET_CPUS
 906  */
 907 #ifdef CONFIG_SMP
 908 void __init setup_ioapic_dest(void)
 909 {
 910         int pin, ioapic, irq, irq_entry;
 911
 912         if (skip_ioapic_setup == 1)
 913                 return;
 914
 915         for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
 916                 for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
 917                         irq_entry = find_irq_entry(ioapic, pin, mp_INT);
 918                         if (irq_entry == -1)
 919                                 continue;
 920                         irq = pin_2_irq(irq_entry, ioapic, pin);
 921                         set_ioapic_affinity_irq(irq, TARGET_CPUS);
 922                 }
 923
 924         }
 925 }
 926 #endif
 927
 928 #if defined(CONFIG_EISA) || defined(CONFIG_MCA)
 929 /*
 930  * EISA Edge/Level control register, ELCR
 931  */
 932 static int EISA_ELCR(unsigned int irq)
 933 {
 934         if (irq < 16) {
 935                 unsigned int port = 0x4d0 + (irq >> 3);
 936                 return (inb(port) >> (irq & 7)) & 1;
 937         }
 938         apic_printk(APIC_VERBOSE, KERN_INFO
 939                         "Broken MPtable reports ISA irq %d\n", irq);
 940         return 0;
 941 }
 942 #endif
 943
 944 /* ISA interrupts are always polarity zero edge triggered,
 945  * when listed as conforming in the MP table. */
 946
 947 #define default_ISA_trigger(idx)        (0)
 948 #define default_ISA_polarity(idx)       (0)
 949
 950 /* EISA interrupts are always polarity zero and can be edge or level
 951  * trigger depending on the ELCR value.  If an interrupt is listed as
 952  * EISA conforming in the MP table, that means its trigger type must
 953  * be read in from the ELCR */
 954
 955 #define default_EISA_trigger(idx)       (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq))
 956 #define default_EISA_polarity(idx)      default_ISA_polarity(idx)
 957
 958 /* PCI interrupts are always polarity one level triggered,
 959  * when listed as conforming in the MP table. */
 960
 961 #define default_PCI_trigger(idx)        (1)
 962 #define default_PCI_polarity(idx)       (1)
 963
 964 /* MCA interrupts are always polarity zero level triggered,
 965  * when listed as conforming in the MP table. */
 966
 967 #define default_MCA_trigger(idx)        (1)
 968 #define default_MCA_polarity(idx)       default_ISA_polarity(idx)
 969
 970 static int MPBIOS_polarity(int idx)
 971 {
 972         int bus = mp_irqs[idx].mpc_srcbus;
 973         int polarity;
 974
 975         /*
 976          * Determine IRQ line polarity (high active or low active):
 977          */
 978         switch (mp_irqs[idx].mpc_irqflag & 3)
 979         {
 980                 case 0: /* conforms, ie. bus-type dependent polarity */
 981                 {
 982                         polarity = test_bit(bus, mp_bus_not_pci)?
 983                                 default_ISA_polarity(idx):
 984                                 default_PCI_polarity(idx);
 985                         break;
 986                 }
 987                 case 1: /* high active */
 988                 {
 989                         polarity = 0;
 990                         break;
 991                 }
 992                 case 2: /* reserved */
 993                 {
 994                         printk(KERN_WARNING "broken BIOS!!\n");
 995                         polarity = 1;
 996                         break;
 997                 }
 998                 case 3: /* low active */
 999                 {
1000                         polarity = 1;
1001                         break;
1002                 }
1003                 default: /* invalid */
1004                 {
1005                         printk(KERN_WARNING "broken BIOS!!\n");
1006                         polarity = 1;
1007                         break;
1008                 }
1009         }
1010         return polarity;
1011 }
1012
1013 static int MPBIOS_trigger(int idx)
1014 {
1015         int bus = mp_irqs[idx].mpc_srcbus;
1016         int trigger;
1017
1018         /*
1019          * Determine IRQ trigger mode (edge or level sensitive):
1020          */
1021         switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
1022         {
1023                 case 0: /* conforms, ie. bus-type dependent */
1024                 {
1025                         trigger = test_bit(bus, mp_bus_not_pci)?
1026                                         default_ISA_trigger(idx):
1027                                         default_PCI_trigger(idx);
1028 #if defined(CONFIG_EISA) || defined(CONFIG_MCA)
1029                         switch (mp_bus_id_to_type[bus])
1030                         {
1031                                 case MP_BUS_ISA: /* ISA pin */
1032                                 {
1033                                         /* set before the switch */
1034                                         break;
1035                                 }
1036                                 case MP_BUS_EISA: /* EISA pin */
1037                                 {
1038                                         trigger = default_EISA_trigger(idx);
1039                                         break;
1040                                 }
1041                                 case MP_BUS_PCI: /* PCI pin */
1042                                 {
1043                                         /* set before the switch */
1044                                         break;
1045                                 }
1046                                 case MP_BUS_MCA: /* MCA pin */
1047                                 {
1048                                         trigger = default_MCA_trigger(idx);
1049                                         break;
1050                                 }
1051                                 default:
1052                                 {
1053                                         printk(KERN_WARNING "broken BIOS!!\n");
1054                                         trigger = 1;
1055                                         break;
1056                                 }
1057                         }
1058 #endif
1059                         break;
1060                 }
1061                 case 1: /* edge */
1062                 {
1063                         trigger = 0;
1064                         break;
1065                 }
1066                 case 2: /* reserved */
1067                 {
1068                         printk(KERN_WARNING "broken BIOS!!\n");
1069                         trigger = 1;
1070                         break;
1071                 }
1072                 case 3: /* level */
1073                 {
1074                         trigger = 1;
1075                         break;
1076                 }
1077                 default: /* invalid */
1078                 {
1079                         printk(KERN_WARNING "broken BIOS!!\n");
1080                         trigger = 0;
1081                         break;
1082                 }
1083         }
1084         return trigger;
1085 }
1086
1087 static inline int irq_polarity(int idx)
1088 {
1089         return MPBIOS_polarity(idx);
1090 }
1091
1092 static inline int irq_trigger(int idx)
1093 {
1094         return MPBIOS_trigger(idx);
1095 }
1096
1097 static int pin_2_irq(int idx, int apic, int pin)
1098 {
1099         int irq, i;
1100         int bus = mp_irqs[idx].mpc_srcbus;
1101
1102         /*
1103          * Debugging check, we are in big trouble if this message pops up!
1104          */
1105         if (mp_irqs[idx].mpc_dstirq != pin)
1106                 printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
1107
1108         if (test_bit(bus, mp_bus_not_pci))
1109                 irq = mp_irqs[idx].mpc_srcbusirq;
1110         else {
1111                 /*
1112                  * PCI IRQs are mapped in order
1113                  */
1114                 i = irq = 0;
1115                 while (i < apic)
1116                         irq += nr_ioapic_registers[i++];
1117                 irq += pin;
1118
1119                 /*
1120                  * For MPS mode, so far only needed by ES7000 platform
1121                  */
1122                 if (ioapic_renumber_irq)
1123                         irq = ioapic_renumber_irq(apic, irq);
1124         }
1125
1126         /*
1127          * PCI IRQ command line redirection. Yes, limits are hardcoded.
1128          */
1129         if ((pin >= 16) && (pin <= 23)) {
1130                 if (pirq_entries[pin-16] != -1) {
1131                         if (!pirq_entries[pin-16]) {
1132                                 apic_printk(APIC_VERBOSE, KERN_DEBUG
1133                                                 "disabling PIRQ%d\n", pin-16);
1134                         } else {
1135                                 irq = pirq_entries[pin-16];
1136                                 apic_printk(APIC_VERBOSE, KERN_DEBUG
1137                                                 "using PIRQ%d -> IRQ %d\n",
1138                                                 pin-16, irq);
1139                         }
1140                 }
1141         }
1142         return irq;
1143 }
1144
1145 static inline int IO_APIC_irq_trigger(int irq)
1146 {
1147         int apic, idx, pin;
1148
1149         for (apic = 0; apic < nr_ioapics; apic++) {
1150                 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
1151                         idx = find_irq_entry(apic,pin,mp_INT);
1152                         if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin)))
1153                                 return irq_trigger(idx);
1154                 }
1155         }
1156         /*
1157          * nonexistent IRQs are edge default
1158          */
1159         return 0;
1160 }
1161
1162 /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
1163 static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 };
1164
1165 static int __assign_irq_vector(int irq)
1166 {
1167         static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
1168         int vector, offset;
1169
1170         BUG_ON((unsigned)irq >= NR_IRQ_VECTORS);
1171
1172         if (irq_vector[irq] > 0)
1173                 return irq_vector[irq];
1174
1175         vector = current_vector;
1176         offset = current_offset;
1177 next:
1178         vector += 8;
1179         if (vector >= FIRST_SYSTEM_VECTOR) {
1180                 offset = (offset + 1) % 8;
1181                 vector = FIRST_DEVICE_VECTOR + offset;
1182         }
1183         if (vector == current_vector)
1184                 return -ENOSPC;
1185         if (test_and_set_bit(vector, used_vectors))
1186                 goto next;
1187
1188         current_vector = vector;
1189         current_offset = offset;
1190         irq_vector[irq] = vector;
1191
1192         return vector;
1193 }
1194
1195 static int assign_irq_vector(int irq)
1196 {
1197         unsigned long flags;
1198         int vector;
1199
1200         spin_lock_irqsave(&vector_lock, flags);
1201         vector = __assign_irq_vector(irq);
1202         spin_unlock_irqrestore(&vector_lock, flags);
1203
1204         return vector;
1205 }
1206 static struct irq_chip ioapic_chip;
1207
1208 #define IOAPIC_AUTO     -1
1209 #define IOAPIC_EDGE     0
1210 #define IOAPIC_LEVEL    1
1211
1212 static void ioapic_register_intr(int irq, int vector, unsigned long trigger)
1213 {
1214         if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
1215             trigger == IOAPIC_LEVEL) {
1216                 irq_desc[irq].status |= IRQ_LEVEL;
1217                 set_irq_chip_and_handler_name(irq, &ioapic_chip,
1218                                          handle_fasteoi_irq, "fasteoi");
1219         } else {
1220                 irq_desc[irq].status &= ~IRQ_LEVEL;
1221                 set_irq_chip_and_handler_name(irq, &ioapic_chip,
1222                                          handle_edge_irq, "edge");
1223         }
1224         set_intr_gate(vector, interrupt[irq]);
1225 }
1226
1227 static void __init setup_IO_APIC_irqs(void)
1228 {
1229         struct IO_APIC_route_entry entry;
1230         int apic, pin, idx, irq, first_notcon = 1, vector;
1231
1232         apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
1233
1234         for (apic = 0; apic < nr_ioapics; apic++) {
1235         for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
1236
1237                 /*
1238                  * add it to the IO-APIC irq-routing table:
1239                  */
1240                 memset(&entry,0,sizeof(entry));
1241
1242                 entry.delivery_mode = INT_DELIVERY_MODE;
1243                 entry.dest_mode = INT_DEST_MODE;
1244                 entry.mask = 0;                         /* enable IRQ */
1245                 entry.dest.logical.logical_dest =
1246                                         cpu_mask_to_apicid(TARGET_CPUS);
1247
1248                 idx = find_irq_entry(apic,pin,mp_INT);
1249                 if (idx == -1) {
1250                         if (first_notcon) {
1251                                 apic_printk(APIC_VERBOSE, KERN_DEBUG
1252                                                 " IO-APIC (apicid-pin) %d-%d",
1253                                                 mp_ioapics[apic].mpc_apicid,
1254                                                 pin);
1255                                 first_notcon = 0;
1256                         } else
1257                                 apic_printk(APIC_VERBOSE, ", %d-%d",
1258                                         mp_ioapics[apic].mpc_apicid, pin);
1259                         continue;
1260                 }
1261
1262                 if (!first_notcon) {
1263                         apic_printk(APIC_VERBOSE, " not connected.\n");
1264                         first_notcon = 1;
1265                 }
1266
1267                 entry.trigger = irq_trigger(idx);
1268                 entry.polarity = irq_polarity(idx);
1269
1270                 if (irq_trigger(idx)) {
1271                         entry.trigger = 1;
1272                         entry.mask = 1;
1273                 }
1274
1275                 irq = pin_2_irq(idx, apic, pin);
1276                 /*
1277                  * skip adding the timer int on secondary nodes, which causes
1278                  * a small but painful rift in the time-space continuum
1279                  */
1280                 if (multi_timer_check(apic, irq))
1281                         continue;
1282                 else
1283                         add_pin_to_irq(irq, apic, pin);
1284
1285                 if (!apic && !IO_APIC_IRQ(irq))
1286                         continue;
1287
1288                 if (IO_APIC_IRQ(irq)) {
1289                         vector = assign_irq_vector(irq);
1290                         entry.vector = vector;
1291                         ioapic_register_intr(irq, vector, IOAPIC_AUTO);
1292
1293                         if (!apic && (irq < 16))
1294                                 disable_8259A_irq(irq);
1295                 }
1296                 ioapic_write_entry(apic, pin, entry);
1297         }
1298         }
1299
1300         if (!first_notcon)
1301                 apic_printk(APIC_VERBOSE, " not connected.\n");
1302 }
1303
1304 /*
1305  * Set up the 8259A-master output pin:
1306  */
1307 static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
1308 {
1309         struct IO_APIC_route_entry entry;
1310
1311         memset(&entry,0,sizeof(entry));
1312
1313         disable_8259A_irq(0);
1314
1315         /* mask LVT0 */
1316         apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
1317
1318         /*
1319          * We use logical delivery to get the timer IRQ
1320          * to the first CPU.
1321          */
1322         entry.dest_mode = INT_DEST_MODE;
1323         entry.mask = 0;                                 /* unmask IRQ now */
1324         entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
1325         entry.delivery_mode = INT_DELIVERY_MODE;
1326         entry.polarity = 0;
1327         entry.trigger = 0;
1328         entry.vector = vector;
1329
1330         /*
1331          * The timer IRQ doesn't have to know that behind the
1332          * scene we have a 8259A-master in AEOI mode ...
1333          */
1334         irq_desc[0].chip = &ioapic_chip;
1335         set_irq_handler(0, handle_edge_irq);
1336
1337         /*
1338          * Add it to the IO-APIC irq-routing table:
1339          */
1340         ioapic_write_entry(apic, pin, entry);
1341
1342         enable_8259A_irq(0);
1343 }
1344
1345 void __init print_IO_APIC(void)
1346 {
1347         int apic, i;
1348         union IO_APIC_reg_00 reg_00;
1349         union IO_APIC_reg_01 reg_01;
1350         union IO_APIC_reg_02 reg_02;
1351         union IO_APIC_reg_03 reg_03;
1352         unsigned long flags;
1353
1354         if (apic_verbosity == APIC_QUIET)
1355                 return;
1356
1357         printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
1358         for (i = 0; i < nr_ioapics; i++)
1359                 printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
1360                        mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
1361
1362         /*
1363          * We are a bit conservative about what we expect.  We have to
1364          * know about every hardware change ASAP.
1365          */
1366         printk(KERN_INFO "testing the IO APIC.......................\n");
1367
1368         for (apic = 0; apic < nr_ioapics; apic++) {
1369
1370         spin_lock_irqsave(&ioapic_lock, flags);
1371         reg_00.raw = io_apic_read(apic, 0);
1372         reg_01.raw = io_apic_read(apic, 1);
1373         if (reg_01.bits.version >= 0x10)
1374                 reg_02.raw = io_apic_read(apic, 2);
1375         if (reg_01.bits.version >= 0x20)
1376                 reg_03.raw = io_apic_read(apic, 3);
1377         spin_unlock_irqrestore(&ioapic_lock, flags);
1378
1379         printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
1380         printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
1381         printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
1382         printk(KERN_DEBUG ".......    : Delivery Type: %X\n", reg_00.bits.delivery_type);
1383         printk(KERN_DEBUG ".......    : LTS          : %X\n", reg_00.bits.LTS);
1384
1385         printk(KERN_DEBUG ".... register #01: %08X\n", reg_01.raw);
1386         printk(KERN_DEBUG ".......     : max redirection entries: %04X\n", reg_01.bits.entries);
1387
1388         printk(KERN_DEBUG ".......     : PRQ implemented: %X\n", reg_01.bits.PRQ);
1389         printk(KERN_DEBUG ".......     : IO APIC version: %04X\n", reg_01.bits.version);
1390
1391         /*
1392          * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
1393          * but the value of reg_02 is read as the previous read register
1394          * value, so ignore it if reg_02 == reg_01.
1395          */
1396         if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) {
1397                 printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
1398                 printk(KERN_DEBUG ".......     : arbitration: %02X\n", reg_02.bits.arbitration);
1399         }
1400
1401         /*
1402          * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
1403          * or reg_03, but the value of reg_0[23] is read as the previous read
1404          * register value, so ignore it if reg_03 == reg_0[12].
1405          */
1406         if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw &&
1407             reg_03.raw != reg_01.raw) {
1408                 printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw);
1409                 printk(KERN_DEBUG ".......     : Boot DT    : %X\n", reg_03.bits.boot_DT);
1410         }
1411
1412         printk(KERN_DEBUG ".... IRQ redirection table:\n");
1413
1414         printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol"
1415                           " Stat Dest Deli Vect:   \n");
1416
1417         for (i = 0; i <= reg_01.bits.entries; i++) {
1418                 struct IO_APIC_route_entry entry;
1419
1420                 entry = ioapic_read_entry(apic, i);
1421
1422                 printk(KERN_DEBUG " %02x %03X %02X  ",
1423                         i,
1424                         entry.dest.logical.logical_dest,
1425                         entry.dest.physical.physical_dest
1426                 );
1427
1428                 printk("%1d    %1d    %1d   %1d   %1d    %1d    %1d    %02X\n",
1429                         entry.mask,
1430                         entry.trigger,
1431                         entry.irr,
1432                         entry.polarity,
1433                         entry.delivery_status,
1434                         entry.dest_mode,
1435                         entry.delivery_mode,
1436                         entry.vector
1437                 );
1438         }
1439         }
1440         printk(KERN_DEBUG "IRQ to pin mappings:\n");
1441         for (i = 0; i < NR_IRQS; i++) {
1442                 struct irq_pin_list *entry = irq_2_pin + i;
1443                 if (entry->pin < 0)
1444                         continue;
1445                 printk(KERN_DEBUG "IRQ%d ", i);
1446                 for (;;) {
1447                         printk("-> %d:%d", entry->apic, entry->pin);
1448                         if (!entry->next)
1449                                 break;
1450                         entry = irq_2_pin + entry->next;
1451                 }
1452                 printk("\n");
1453         }
1454
1455         printk(KERN_INFO ".................................... done.\n");
1456
1457         return;
1458 }
1459
1460 #if 0
1461
1462 static void print_APIC_bitfield (int base)
1463 {
1464         unsigned int v;
1465         int i, j;
1466
1467         if (apic_verbosity == APIC_QUIET)
1468                 return;
1469
1470         printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
1471         for (i = 0; i < 8; i++) {
1472                 v = apic_read(base + i*0x10);
1473                 for (j = 0; j < 32; j++) {
1474                         if (v & (1<<j))
1475                                 printk("1");
1476                         else
1477                                 printk("0");
1478                 }
1479                 printk("\n");
1480         }
1481 }
1482
1483 void /*__init*/ print_local_APIC(void * dummy)
1484 {
1485         unsigned int v, ver, maxlvt;
1486
1487         if (apic_verbosity == APIC_QUIET)
1488                 return;
1489
1490         printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
1491                 smp_processor_id(), hard_smp_processor_id());
1492         printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v,
1493                         GET_APIC_ID(read_apic_id()));
1494         v = apic_read(APIC_LVR);
1495         printk(KERN_INFO "... APIC VERSION: %08x\n", v);
1496         ver = GET_APIC_VERSION(v);
1497         maxlvt = lapic_get_maxlvt();
1498
1499         v = apic_read(APIC_TASKPRI);
1500         printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
1501
1502         if (APIC_INTEGRATED(ver)) {                     /* !82489DX */
1503                 v = apic_read(APIC_ARBPRI);
1504                 printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
1505                         v & APIC_ARBPRI_MASK);
1506                 v = apic_read(APIC_PROCPRI);
1507                 printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
1508         }
1509
1510         v = apic_read(APIC_EOI);
1511         printk(KERN_DEBUG "... APIC EOI: %08x\n", v);
1512         v = apic_read(APIC_RRR);
1513         printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
1514         v = apic_read(APIC_LDR);
1515         printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
1516         v = apic_read(APIC_DFR);
1517         printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
1518         v = apic_read(APIC_SPIV);
1519         printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
1520
1521         printk(KERN_DEBUG "... APIC ISR field:\n");
1522         print_APIC_bitfield(APIC_ISR);
1523         printk(KERN_DEBUG "... APIC TMR field:\n");
1524         print_APIC_bitfield(APIC_TMR);
1525         printk(KERN_DEBUG "... APIC IRR field:\n");
1526         print_APIC_bitfield(APIC_IRR);
1527
1528         if (APIC_INTEGRATED(ver)) {             /* !82489DX */
1529                 if (maxlvt > 3)         /* Due to the Pentium erratum 3AP. */
1530                         apic_write(APIC_ESR, 0);
1531                 v = apic_read(APIC_ESR);
1532                 printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
1533         }
1534
1535         v = apic_read(APIC_ICR);
1536         printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
1537         v = apic_read(APIC_ICR2);
1538         printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
1539
1540         v = apic_read(APIC_LVTT);
1541         printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
1542
1543         if (maxlvt > 3) {                       /* PC is LVT#4. */
1544                 v = apic_read(APIC_LVTPC);
1545                 printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
1546         }
1547         v = apic_read(APIC_LVT0);
1548         printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
1549         v = apic_read(APIC_LVT1);
1550         printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
1551
1552         if (maxlvt > 2) {                       /* ERR is LVT#3. */
1553                 v = apic_read(APIC_LVTERR);
1554                 printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
1555         }
1556
1557         v = apic_read(APIC_TMICT);
1558         printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
1559         v = apic_read(APIC_TMCCT);
1560         printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
1561         v = apic_read(APIC_TDCR);
1562         printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
1563         printk("\n");
1564 }
1565
1566 void print_all_local_APICs (void)
1567 {
1568         on_each_cpu(print_local_APIC, NULL, 1, 1);
1569 }
1570
1571 void /*__init*/ print_PIC(void)
1572 {
1573         unsigned int v;
1574         unsigned long flags;
1575
1576         if (apic_verbosity == APIC_QUIET)
1577                 return;
1578
1579         printk(KERN_DEBUG "\nprinting PIC contents\n");
1580
1581         spin_lock_irqsave(&i8259A_lock, flags);
1582
1583         v = inb(0xa1) << 8 | inb(0x21);
1584         printk(KERN_DEBUG "... PIC  IMR: %04x\n", v);
1585
1586         v = inb(0xa0) << 8 | inb(0x20);
1587         printk(KERN_DEBUG "... PIC  IRR: %04x\n", v);
1588
1589         outb(0x0b,0xa0);
1590         outb(0x0b,0x20);
1591         v = inb(0xa0) << 8 | inb(0x20);
1592         outb(0x0a,0xa0);
1593         outb(0x0a,0x20);
1594
1595         spin_unlock_irqrestore(&i8259A_lock, flags);
1596
1597         printk(KERN_DEBUG "... PIC  ISR: %04x\n", v);
1598
1599         v = inb(0x4d1) << 8 | inb(0x4d0);
1600         printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
1601 }
1602
1603 #endif  /*  0  */
1604
1605 static void __init enable_IO_APIC(void)
1606 {
1607         union IO_APIC_reg_01 reg_01;
1608         int i8259_apic, i8259_pin;
1609         int i, apic;
1610         unsigned long flags;
1611
1612         for (i = 0; i < PIN_MAP_SIZE; i++) {
1613                 irq_2_pin[i].pin = -1;
1614                 irq_2_pin[i].next = 0;
1615         }
1616         if (!pirqs_enabled)
1617                 for (i = 0; i < MAX_PIRQS; i++)
1618                         pirq_entries[i] = -1;
1619
1620         /*
1621          * The number of IO-APIC IRQ registers (== #pins):
1622          */
1623         for (apic = 0; apic < nr_ioapics; apic++) {
1624                 spin_lock_irqsave(&ioapic_lock, flags);
1625                 reg_01.raw = io_apic_read(apic, 1);
1626                 spin_unlock_irqrestore(&ioapic_lock, flags);
1627                 nr_ioapic_registers[apic] = reg_01.bits.entries+1;
1628         }
1629         for(apic = 0; apic < nr_ioapics; apic++) {
1630                 int pin;
1631                 /* See if any of the pins is in ExtINT mode */
1632                 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
1633                         struct IO_APIC_route_entry entry;
1634                         entry = ioapic_read_entry(apic, pin);
1635
1636
1637                         /* If the interrupt line is enabled and in ExtInt mode
1638                          * I have found the pin where the i8259 is connected.
1639                          */
1640                         if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
1641                                 ioapic_i8259.apic = apic;
1642                                 ioapic_i8259.pin  = pin;
1643                                 goto found_i8259;
1644                         }
1645                 }
1646         }
1647  found_i8259:
1648         /* Look to see what if the MP table has reported the ExtINT */
1649         /* If we could not find the appropriate pin by looking at the ioapic
1650          * the i8259 probably is not connected the ioapic but give the
1651          * mptable a chance anyway.
1652          */
1653         i8259_pin  = find_isa_irq_pin(0, mp_ExtINT);
1654         i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
1655         /* Trust the MP table if nothing is setup in the hardware */
1656         if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
1657                 printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
1658                 ioapic_i8259.pin  = i8259_pin;
1659                 ioapic_i8259.apic = i8259_apic;
1660         }
1661         /* Complain if the MP table and the hardware disagree */
1662         if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
1663                 (i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
1664         {
1665                 printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
1666         }
1667
1668         /*
1669          * Do not trust the IO-APIC being empty at bootup
1670          */
1671         clear_IO_APIC();
1672 }
1673
1674 /*
1675  * Not an __init, needed by the reboot code
1676  */
1677 void disable_IO_APIC(void)
1678 {
1679         /*
1680          * Clear the IO-APIC before rebooting:
1681          */
1682         clear_IO_APIC();
1683
1684         /*
1685          * If the i8259 is routed through an IOAPIC
1686          * Put that IOAPIC in virtual wire mode
1687          * so legacy interrupts can be delivered.
1688          */
1689         if (ioapic_i8259.pin != -1) {
1690                 struct IO_APIC_route_entry entry;
1691
1692                 memset(&entry, 0, sizeof(entry));
1693                 entry.mask            = 0; /* Enabled */
1694                 entry.trigger         = 0; /* Edge */
1695                 entry.irr             = 0;
1696                 entry.polarity        = 0; /* High */
1697                 entry.delivery_status = 0;
1698                 entry.dest_mode       = 0; /* Physical */
1699                 entry.delivery_mode   = dest_ExtINT; /* ExtInt */
1700                 entry.vector          = 0;
1701                 entry.dest.physical.physical_dest =
1702                                         GET_APIC_ID(read_apic_id());
1703
1704                 /*
1705                  * Add it to the IO-APIC irq-routing table:
1706                  */
1707                 ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
1708         }
1709         disconnect_bsp_APIC(ioapic_i8259.pin != -1);
1710 }
1711
1712 /*
1713  * function to set the IO-APIC physical IDs based on the
1714  * values stored in the MPC table.
1715  *
1716  * by Matt Domsch <Matt_Domsch@dell.com>  Tue Dec 21 12:25:05 CST 1999
1717  */
1718
1719 #ifndef CONFIG_X86_NUMAQ
1720 static void __init setup_ioapic_ids_from_mpc(void)
1721 {
1722         union IO_APIC_reg_00 reg_00;
1723         physid_mask_t phys_id_present_map;
1724         int apic;
1725         int i;
1726         unsigned char old_id;
1727         unsigned long flags;
1728
1729         /*
1730          * Don't check I/O APIC IDs for xAPIC systems.  They have
1731          * no meaning without the serial APIC bus.
1732          */
1733         if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
1734                 || APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
1735                 return;
1736         /*
1737          * This is broken; anything with a real cpu count has to
1738          * circumvent this idiocy regardless.
1739          */
1740         phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map);
1741
1742         /*
1743          * Set the IOAPIC ID to the value stored in the MPC table.
1744          */
1745         for (apic = 0; apic < nr_ioapics; apic++) {
1746
1747                 /* Read the register 0 value */
1748                 spin_lock_irqsave(&ioapic_lock, flags);
1749                 reg_00.raw = io_apic_read(apic, 0);
1750                 spin_unlock_irqrestore(&ioapic_lock, flags);
1751
1752                 old_id = mp_ioapics[apic].mpc_apicid;
1753
1754                 if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) {
1755                         printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
1756                                 apic, mp_ioapics[apic].mpc_apicid);
1757                         printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
1758                                 reg_00.bits.ID);
1759                         mp_ioapics[apic].mpc_apicid = reg_00.bits.ID;
1760                 }
1761
1762                 /*
1763                  * Sanity check, is the ID really free? Every APIC in a
1764                  * system must have a unique ID or we get lots of nice
1765                  * 'stuck on smp_invalidate_needed IPI wait' messages.
1766                  */
1767                 if (check_apicid_used(phys_id_present_map,
1768                                         mp_ioapics[apic].mpc_apicid)) {
1769                         printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
1770                                 apic, mp_ioapics[apic].mpc_apicid);
1771                         for (i = 0; i < get_physical_broadcast(); i++)
1772                                 if (!physid_isset(i, phys_id_present_map))
1773                                         break;
1774                         if (i >= get_physical_broadcast())
1775                                 panic("Max APIC ID exceeded!\n");
1776                         printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
1777                                 i);
1778                         physid_set(i, phys_id_present_map);
1779                         mp_ioapics[apic].mpc_apicid = i;
1780                 } else {
1781                         physid_mask_t tmp;
1782                         tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid);
1783                         apic_printk(APIC_VERBOSE, "Setting %d in the "
1784                                         "phys_id_present_map\n",
1785                                         mp_ioapics[apic].mpc_apicid);
1786                         physids_or(phys_id_present_map, phys_id_present_map, tmp);
1787                 }
1788
1789
1790                 /*
1791                  * We need to adjust the IRQ routing table
1792                  * if the ID changed.
1793                  */
1794                 if (old_id != mp_ioapics[apic].mpc_apicid)
1795                         for (i = 0; i < mp_irq_entries; i++)
1796                                 if (mp_irqs[i].mpc_dstapic == old_id)
1797                                         mp_irqs[i].mpc_dstapic
1798                                                 = mp_ioapics[apic].mpc_apicid;
1799
1800                 /*
1801                  * Read the right value from the MPC table and
1802                  * write it into the ID register.
1803                  */
1804                 apic_printk(APIC_VERBOSE, KERN_INFO
1805                         "...changing IO-APIC physical APIC ID to %d ...",
1806                         mp_ioapics[apic].mpc_apicid);
1807
1808                 reg_00.bits.ID = mp_ioapics[apic].mpc_apicid;
1809                 spin_lock_irqsave(&ioapic_lock, flags);
1810                 io_apic_write(apic, 0, reg_00.raw);
1811                 spin_unlock_irqrestore(&ioapic_lock, flags);
1812
1813                 /*
1814                  * Sanity check
1815                  */
1816                 spin_lock_irqsave(&ioapic_lock, flags);
1817                 reg_00.raw = io_apic_read(apic, 0);
1818                 spin_unlock_irqrestore(&ioapic_lock, flags);
1819                 if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid)
1820                         printk("could not set ID!\n");
1821                 else
1822                         apic_printk(APIC_VERBOSE, " ok.\n");
1823         }
1824 }
1825 #else
1826 static void __init setup_ioapic_ids_from_mpc(void) { }
1827 #endif
1828
1829 int no_timer_check __initdata;
1830
1831 static int __init notimercheck(char *s)
1832 {
1833         no_timer_check = 1;
1834         return 1;
1835 }
1836 __setup("no_timer_check", notimercheck);
1837
1838 /*
1839  * There is a nasty bug in some older SMP boards, their mptable lies
1840  * about the timer IRQ. We do the following to work around the situation:
1841  *
1842  *      - timer IRQ defaults to IO-APIC IRQ
1843  *      - if this function detects that timer IRQs are defunct, then we fall
1844  *        back to ISA timer IRQs
1845  */
1846 static int __init timer_irq_works(void)
1847 {
1848         unsigned long t1 = jiffies;
1849         unsigned long flags;
1850
1851         if (no_timer_check)
1852                 return 1;
1853
1854         local_save_flags(flags);
1855         local_irq_enable();
1856         /* Let ten ticks pass... */
1857         mdelay((10 * 1000) / HZ);
1858         local_irq_restore(flags);
1859
1860         /*
1861          * Expect a few ticks at least, to be sure some possible
1862          * glue logic does not lock up after one or two first
1863          * ticks in a non-ExtINT mode.  Also the local APIC
1864          * might have cached one ExtINT interrupt.  Finally, at
1865          * least one tick may be lost due to delays.
1866          */
1867         if (time_after(jiffies, t1 + 4))
1868                 return 1;
1869
1870         return 0;
1871 }
1872
1873 /*
1874  * In the SMP+IOAPIC case it might happen that there are an unspecified
1875  * number of pending IRQ events unhandled. These cases are very rare,
1876  * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
1877  * better to do it this way as thus we do not have to be aware of
1878  * 'pending' interrupts in the IRQ path, except at this point.
1879  */
1880 /*
1881  * Edge triggered needs to resend any interrupt
1882  * that was delayed but this is now handled in the device
1883  * independent code.
1884  */
1885
1886 /*
1887  * Startup quirk:
1888  *
1889  * Starting up a edge-triggered IO-APIC interrupt is
1890  * nasty - we need to make sure that we get the edge.
1891  * If it is already asserted for some reason, we need
1892  * return 1 to indicate that is was pending.
1893  *
1894  * This is not complete - we should be able to fake
1895  * an edge even if it isn't on the 8259A...
1896  *
1897  * (We do this for level-triggered IRQs too - it cannot hurt.)
1898  */
1899 static unsigned int startup_ioapic_irq(unsigned int irq)
1900 {
1901         int was_pending = 0;
1902         unsigned long flags;
1903
1904         spin_lock_irqsave(&ioapic_lock, flags);
1905         if (irq < 16) {
1906                 disable_8259A_irq(irq);
1907                 if (i8259A_irq_pending(irq))
1908                         was_pending = 1;
1909         }
1910         __unmask_IO_APIC_irq(irq);
1911         spin_unlock_irqrestore(&ioapic_lock, flags);
1912
1913         return was_pending;
1914 }
1915
1916 static void ack_ioapic_irq(unsigned int irq)
1917 {
1918         move_native_irq(irq);
1919         ack_APIC_irq();
1920 }
1921
1922 static void ack_ioapic_quirk_irq(unsigned int irq)
1923 {
1924         unsigned long v;
1925         int i;
1926
1927         move_native_irq(irq);
1928 /*
1929  * It appears there is an erratum which affects at least version 0x11
1930  * of I/O APIC (that's the 82093AA and cores integrated into various
1931  * chipsets).  Under certain conditions a level-triggered interrupt is
1932  * erroneously delivered as edge-triggered one but the respective IRR
1933  * bit gets set nevertheless.  As a result the I/O unit expects an EOI
1934  * message but it will never arrive and further interrupts are blocked
1935  * from the source.  The exact reason is so far unknown, but the
1936  * phenomenon was observed when two consecutive interrupt requests
1937  * from a given source get delivered to the same CPU and the source is
1938  * temporarily disabled in between.
1939  *
1940  * A workaround is to simulate an EOI message manually.  We achieve it
1941  * by setting the trigger mode to edge and then to level when the edge
1942  * trigger mode gets detected in the TMR of a local APIC for a
1943  * level-triggered interrupt.  We mask the source for the time of the
1944  * operation to prevent an edge-triggered interrupt escaping meanwhile.
1945  * The idea is from Manfred Spraul.  --macro
1946  */
1947         i = irq_vector[irq];
1948
1949         v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
1950
1951         ack_APIC_irq();
1952
1953         if (!(v & (1 << (i & 0x1f)))) {
1954                 atomic_inc(&irq_mis_count);
1955                 spin_lock(&ioapic_lock);
1956                 __mask_and_edge_IO_APIC_irq(irq);
1957                 __unmask_and_level_IO_APIC_irq(irq);
1958                 spin_unlock(&ioapic_lock);
1959         }
1960 }
1961
1962 static int ioapic_retrigger_irq(unsigned int irq)
1963 {
1964         send_IPI_self(irq_vector[irq]);
1965
1966         return 1;
1967 }
1968
1969 static struct irq_chip ioapic_chip __read_mostly = {
1970         .name           = "IO-APIC",
1971         .startup        = startup_ioapic_irq,
1972         .mask           = mask_IO_APIC_irq,
1973         .unmask         = unmask_IO_APIC_irq,
1974         .ack            = ack_ioapic_irq,
1975         .eoi            = ack_ioapic_quirk_irq,
1976 #ifdef CONFIG_SMP
1977         .set_affinity   = set_ioapic_affinity_irq,
1978 #endif
1979         .retrigger      = ioapic_retrigger_irq,
1980 };
1981
1982
1983 static inline void init_IO_APIC_traps(void)
1984 {
1985         int irq;
1986
1987         /*
1988          * NOTE! The local APIC isn't very good at handling
1989          * multiple interrupts at the same interrupt level.
1990          * As the interrupt level is determined by taking the
1991          * vector number and shifting that right by 4, we
1992          * want to spread these out a bit so that they don't
1993          * all fall in the same interrupt level.
1994          *
1995          * Also, we've got to be careful not to trash gate
1996          * 0x80, because int 0x80 is hm, kind of importantish. ;)
1997          */
1998         for (irq = 0; irq < NR_IRQS ; irq++) {
1999                 if (IO_APIC_IRQ(irq) && !irq_vector[irq]) {
2000                         /*
2001                          * Hmm.. We don't have an entry for this,
2002                          * so default to an old-fashioned 8259
2003                          * interrupt if we can..
2004                          */
2005                         if (irq < 16)
2006                                 make_8259A_irq(irq);
2007                         else
2008                                 /* Strange. Oh, well.. */
2009                                 irq_desc[irq].chip = &no_irq_chip;
2010                 }
2011         }
2012 }
2013
2014 /*
2015  * The local APIC irq-chip implementation:
2016  */
2017
2018 static void ack_apic(unsigned int irq)
2019 {
2020         ack_APIC_irq();
2021 }
2022
2023 static void mask_lapic_irq (unsigned int irq)
2024 {
2025         unsigned long v;
2026
2027         v = apic_read(APIC_LVT0);
2028         apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
2029 }
2030
2031 static void unmask_lapic_irq (unsigned int irq)
2032 {
2033         unsigned long v;
2034
2035         v = apic_read(APIC_LVT0);
2036         apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
2037 }
2038
2039 static struct irq_chip lapic_chip __read_mostly = {
2040         .name           = "local-APIC-edge",
2041         .mask           = mask_lapic_irq,
2042         .unmask         = unmask_lapic_irq,
2043         .eoi            = ack_apic,
2044 };
2045
2046 static void __init setup_nmi(void)
2047 {
2048         /*
2049          * Dirty trick to enable the NMI watchdog ...
2050          * We put the 8259A master into AEOI mode and
2051          * unmask on all local APICs LVT0 as NMI.
2052          *
2053          * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
2054          * is from Maciej W. Rozycki - so we do not have to EOI from
2055          * the NMI handler or the timer interrupt.
2056          */
2057         apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
2058
2059         enable_NMI_through_LVT0();
2060
2061         apic_printk(APIC_VERBOSE, " done.\n");
2062 }
2063
2064 /*
2065  * This looks a bit hackish but it's about the only one way of sending
2066  * a few INTA cycles to 8259As and any associated glue logic.  ICR does
2067  * not support the ExtINT mode, unfortunately.  We need to send these
2068  * cycles as some i82489DX-based boards have glue logic that keeps the
2069  * 8259A interrupt line asserted until INTA.  --macro
2070  */
2071 static inline void __init unlock_ExtINT_logic(void)
2072 {
2073         int apic, pin, i;
2074         struct IO_APIC_route_entry entry0, entry1;
2075         unsigned char save_control, save_freq_select;
2076
2077         pin  = find_isa_irq_pin(8, mp_INT);
2078         if (pin == -1) {
2079                 WARN_ON_ONCE(1);
2080                 return;
2081         }
2082         apic = find_isa_irq_apic(8, mp_INT);
2083         if (apic == -1) {
2084                 WARN_ON_ONCE(1);
2085                 return;
2086         }
2087
2088         entry0 = ioapic_read_entry(apic, pin);
2089         clear_IO_APIC_pin(apic, pin);
2090
2091         memset(&entry1, 0, sizeof(entry1));
2092
2093         entry1.dest_mode = 0;                   /* physical delivery */
2094         entry1.mask = 0;                        /* unmask IRQ now */
2095         entry1.dest.physical.physical_dest = hard_smp_processor_id();
2096         entry1.delivery_mode = dest_ExtINT;
2097         entry1.polarity = entry0.polarity;
2098         entry1.trigger = 0;
2099         entry1.vector = 0;
2100
2101         ioapic_write_entry(apic, pin, entry1);
2102
2103         save_control = CMOS_READ(RTC_CONTROL);
2104         save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
2105         CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
2106                    RTC_FREQ_SELECT);
2107         CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
2108
2109         i = 100;
2110         while (i-- > 0) {
2111                 mdelay(10);
2112                 if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
2113                         i -= 10;
2114         }
2115
2116         CMOS_WRITE(save_control, RTC_CONTROL);
2117         CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
2118         clear_IO_APIC_pin(apic, pin);
2119
2120         ioapic_write_entry(apic, pin, entry0);
2121 }
2122
2123 /*
2124  * This code may look a bit paranoid, but it's supposed to cooperate with
2125  * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
2126  * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
2127  * fanatically on his truly buggy board.
2128  */
2129 static inline void __init check_timer(void)
2130 {
2131         int apic1, pin1, apic2, pin2;
2132         int vector;
2133         unsigned long flags;
2134
2135         local_irq_save(flags);
2136
2137         /*
2138          * get/set the timer IRQ vector:
2139          */
2140         disable_8259A_irq(0);
2141         vector = assign_irq_vector(0);
2142         set_intr_gate(vector, interrupt[0]);
2143
2144         /*
2145          * Subtle, code in do_timer_interrupt() expects an AEOI
2146          * mode for the 8259A whenever interrupts are routed
2147          * through I/O APICs.  Also IRQ0 has to be enabled in
2148          * the 8259A which implies the virtual wire has to be
2149          * disabled in the local APIC.
2150          */
2151         apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
2152         init_8259A(1);
2153         timer_ack = 1;
2154         if (timer_over_8254 > 0)
2155                 enable_8259A_irq(0);
2156
2157         pin1  = find_isa_irq_pin(0, mp_INT);
2158         apic1 = find_isa_irq_apic(0, mp_INT);
2159         pin2  = ioapic_i8259.pin;
2160         apic2 = ioapic_i8259.apic;
2161
2162         printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
2163                 vector, apic1, pin1, apic2, pin2);
2164
2165         if (pin1 != -1) {
2166                 /*
2167                  * Ok, does IRQ0 through the IOAPIC work?
2168                  */
2169                 unmask_IO_APIC_irq(0);
2170                 if (timer_irq_works()) {
2171                         if (nmi_watchdog == NMI_IO_APIC) {
2172                                 disable_8259A_irq(0);
2173                                 setup_nmi();
2174                                 enable_8259A_irq(0);
2175                         }
2176                         if (disable_timer_pin_1 > 0)
2177                                 clear_IO_APIC_pin(0, pin1);
2178                         goto out;
2179                 }
2180                 clear_IO_APIC_pin(apic1, pin1);
2181                 printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to "
2182                                 "IO-APIC\n");
2183         }
2184
2185         printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
2186         if (pin2 != -1) {
2187                 printk("\n..... (found pin %d) ...", pin2);
2188                 /*
2189                  * legacy devices should be connected to IO APIC #0
2190                  */
2191                 setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
2192                 if (timer_irq_works()) {
2193                         printk("works.\n");
2194                         if (pin1 != -1)
2195                                 replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
2196                         else
2197                                 add_pin_to_irq(0, apic2, pin2);
2198                         if (nmi_watchdog == NMI_IO_APIC) {
2199                                 setup_nmi();
2200                         }
2201                         goto out;
2202                 }
2203                 /*
2204                  * Cleanup, just in case ...
2205                  */
2206                 clear_IO_APIC_pin(apic2, pin2);
2207         }
2208         printk(" failed.\n");
2209
2210         if (nmi_watchdog == NMI_IO_APIC) {
2211                 printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
2212                 nmi_watchdog = 0;
2213         }
2214
2215         printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
2216
2217         disable_8259A_irq(0);
2218         set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq,
2219                                       "fasteoi");
2220         apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector);   /* Fixed mode */
2221         enable_8259A_irq(0);
2222
2223         if (timer_irq_works()) {
2224                 printk(" works.\n");
2225                 goto out;
2226         }
2227         apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
2228         printk(" failed.\n");
2229
2230         printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
2231
2232         timer_ack = 0;
2233         init_8259A(0);
2234         make_8259A_irq(0);
2235         apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
2236
2237         unlock_ExtINT_logic();
2238
2239         if (timer_irq_works()) {
2240                 printk(" works.\n");
2241                 goto out;
2242         }
2243         printk(" failed :(.\n");
2244         panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
2245                 "report.  Then try booting with the 'noapic' option");
2246 out:
2247         local_irq_restore(flags);
2248 }
2249
2250 /*
2251  *
2252  * IRQ's that are handled by the PIC in the MPS IOAPIC case.
2253  * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
2254  *   Linux doesn't really care, as it's not actually used
2255  *   for any interrupt handling anyway.
2256  */
2257 #define PIC_IRQS        (1 << PIC_CASCADE_IR)
2258
2259 void __init setup_IO_APIC(void)
2260 {
2261         int i;
2262
2263         /* Reserve all the system vectors. */
2264         for (i = FIRST_SYSTEM_VECTOR; i < NR_VECTORS; i++)
2265                 set_bit(i, used_vectors);
2266
2267         enable_IO_APIC();
2268
2269         if (acpi_ioapic)
2270                 io_apic_irqs = ~0;      /* all IRQs go through IOAPIC */
2271         else
2272                 io_apic_irqs = ~PIC_IRQS;
2273
2274         printk("ENABLING IO-APIC IRQs\n");
2275
2276         /*
2277          * Set up IO-APIC IRQ routing.
2278          */
2279         if (!acpi_ioapic)
2280                 setup_ioapic_ids_from_mpc();
2281         sync_Arb_IDs();
2282         setup_IO_APIC_irqs();
2283         init_IO_APIC_traps();
2284         check_timer();
2285         if (!acpi_ioapic)
2286                 print_IO_APIC();
2287 }
2288
2289 static int __init setup_disable_8254_timer(char *s)
2290 {
2291         timer_over_8254 = -1;
2292         return 1;
2293 }
2294 static int __init setup_enable_8254_timer(char *s)
2295 {
2296         timer_over_8254 = 2;
2297         return 1;
2298 }
2299
2300 __setup("disable_8254_timer", setup_disable_8254_timer);
2301 __setup("enable_8254_timer", setup_enable_8254_timer);
2302
2303 /*
2304  *      Called after all the initialization is done. If we didnt find any
2305  *      APIC bugs then we can allow the modify fast path
2306  */
2307
2308 static int __init io_apic_bug_finalize(void)
2309 {
2310         if(sis_apic_bug == -1)
2311                 sis_apic_bug = 0;
2312         return 0;
2313 }
2314
2315 late_initcall(io_apic_bug_finalize);
2316
2317 struct sysfs_ioapic_data {
2318         struct sys_device dev;
2319         struct IO_APIC_route_entry entry[0];
2320 };
2321 static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
2322
2323 static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
2324 {
2325         struct IO_APIC_route_entry *entry;
2326         struct sysfs_ioapic_data *data;
2327         int i;
2328
2329         data = container_of(dev, struct sysfs_ioapic_data, dev);
2330         entry = data->entry;
2331         for (i = 0; i < nr_ioapic_registers[dev->id]; i ++)
2332                 entry[i] = ioapic_read_entry(dev->id, i);
2333
2334         return 0;
2335 }
2336
2337 static int ioapic_resume(struct sys_device *dev)
2338 {
2339         struct IO_APIC_route_entry *entry;
2340         struct sysfs_ioapic_data *data;
2341         unsigned long flags;
2342         union IO_APIC_reg_00 reg_00;
2343         int i;
2344
2345         data = container_of(dev, struct sysfs_ioapic_data, dev);
2346         entry = data->entry;
2347
2348         spin_lock_irqsave(&ioapic_lock, flags);
2349         reg_00.raw = io_apic_read(dev->id, 0);
2350         if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
2351                 reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
2352                 io_apic_write(dev->id, 0, reg_00.raw);
2353         }
2354         spin_unlock_irqrestore(&ioapic_lock, flags);
2355         for (i = 0; i < nr_ioapic_registers[dev->id]; i ++)
2356                 ioapic_write_entry(dev->id, i, entry[i]);
2357
2358         return 0;
2359 }
2360
2361 static struct sysdev_class ioapic_sysdev_class = {
2362         .name = "ioapic",
2363         .suspend = ioapic_suspend,
2364         .resume = ioapic_resume,
2365 };
2366
2367 static int __init ioapic_init_sysfs(void)
2368 {
2369         struct sys_device * dev;
2370         int i, size, error = 0;
2371
2372         error = sysdev_class_register(&ioapic_sysdev_class);
2373         if (error)
2374                 return error;
2375
2376         for (i = 0; i < nr_ioapics; i++ ) {
2377                 size = sizeof(struct sys_device) + nr_ioapic_registers[i]
2378                         * sizeof(struct IO_APIC_route_entry);
2379                 mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL);
2380                 if (!mp_ioapic_data[i]) {
2381                         printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
2382                         continue;
2383                 }
2384                 memset(mp_ioapic_data[i], 0, size);
2385                 dev = &mp_ioapic_data[i]->dev;
2386                 dev->id = i;
2387                 dev->cls = &ioapic_sysdev_class;
2388                 error = sysdev_register(dev);
2389                 if (error) {
2390                         kfree(mp_ioapic_data[i]);
2391                         mp_ioapic_data[i] = NULL;
2392                         printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
2393                         continue;
2394                 }
2395         }
2396
2397         return 0;
2398 }
2399
2400 device_initcall(ioapic_init_sysfs);
2401
2402 /*
2403  * Dynamic irq allocate and deallocation
2404  */
2405 int create_irq(void)
2406 {
2407         /* Allocate an unused irq */
2408         int irq, new, vector = 0;
2409         unsigned long flags;
2410
2411         irq = -ENOSPC;
2412         spin_lock_irqsave(&vector_lock, flags);
2413         for (new = (NR_IRQS - 1); new >= 0; new--) {
2414                 if (platform_legacy_irq(new))
2415                         continue;
2416                 if (irq_vector[new] != 0)
2417                         continue;
2418                 vector = __assign_irq_vector(new);
2419                 if (likely(vector > 0))
2420                         irq = new;
2421                 break;
2422         }
2423         spin_unlock_irqrestore(&vector_lock, flags);
2424
2425         if (irq >= 0) {
2426                 set_intr_gate(vector, interrupt[irq]);
2427                 dynamic_irq_init(irq);
2428         }
2429         return irq;
2430 }
2431
2432 void destroy_irq(unsigned int irq)
2433 {
2434         unsigned long flags;
2435
2436         dynamic_irq_cleanup(irq);
2437
2438         spin_lock_irqsave(&vector_lock, flags);
2439         clear_bit(irq_vector[irq], used_vectors);
2440         irq_vector[irq] = 0;
2441         spin_unlock_irqrestore(&vector_lock, flags);
2442 }
2443
2444 /*
2445  * MSI message composition
2446  */
2447 #ifdef CONFIG_PCI_MSI
2448 static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
2449 {
2450         int vector;
2451         unsigned dest;
2452
2453         vector = assign_irq_vector(irq);
2454         if (vector >= 0) {
2455                 dest = cpu_mask_to_apicid(TARGET_CPUS);
2456
2457                 msg->address_hi = MSI_ADDR_BASE_HI;
2458                 msg->address_lo =
2459                         MSI_ADDR_BASE_LO |
2460                         ((INT_DEST_MODE == 0) ?
2461                                 MSI_ADDR_DEST_MODE_PHYSICAL:
2462                                 MSI_ADDR_DEST_MODE_LOGICAL) |
2463                         ((INT_DELIVERY_MODE != dest_LowestPrio) ?
2464                                 MSI_ADDR_REDIRECTION_CPU:
2465                                 MSI_ADDR_REDIRECTION_LOWPRI) |
2466                         MSI_ADDR_DEST_ID(dest);
2467
2468                 msg->data =
2469                         MSI_DATA_TRIGGER_EDGE |
2470                         MSI_DATA_LEVEL_ASSERT |
2471                         ((INT_DELIVERY_MODE != dest_LowestPrio) ?
2472                                 MSI_DATA_DELIVERY_FIXED:
2473                                 MSI_DATA_DELIVERY_LOWPRI) |
2474                         MSI_DATA_VECTOR(vector);
2475         }
2476         return vector;
2477 }
2478
2479 #ifdef CONFIG_SMP
2480 static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
2481 {
2482         struct msi_msg msg;
2483         unsigned int dest;
2484         cpumask_t tmp;
2485         int vector;
2486
2487         cpus_and(tmp, mask, cpu_online_map);
2488         if (cpus_empty(tmp))
2489                 tmp = TARGET_CPUS;
2490
2491         vector = assign_irq_vector(irq);
2492         if (vector < 0)
2493                 return;
2494
2495         dest = cpu_mask_to_apicid(mask);
2496
2497         read_msi_msg(irq, &msg);
2498
2499         msg.data &= ~MSI_DATA_VECTOR_MASK;
2500         msg.data |= MSI_DATA_VECTOR(vector);
2501         msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
2502         msg.address_lo |= MSI_ADDR_DEST_ID(dest);
2503
2504         write_msi_msg(irq, &msg);
2505         irq_desc[irq].affinity = mask;
2506 }
2507 #endif /* CONFIG_SMP */
2508
2509 /*
2510  * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
2511  * which implement the MSI or MSI-X Capability Structure.
2512  */
2513 static struct irq_chip msi_chip = {
2514         .name           = "PCI-MSI",
2515         .unmask         = unmask_msi_irq,
2516         .mask           = mask_msi_irq,
2517         .ack            = ack_ioapic_irq,
2518 #ifdef CONFIG_SMP
2519         .set_affinity   = set_msi_irq_affinity,
2520 #endif
2521         .retrigger      = ioapic_retrigger_irq,
2522 };
2523
2524 int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
2525 {
2526         struct msi_msg msg;
2527         int irq, ret;
2528         irq = create_irq();
2529         if (irq < 0)
2530                 return irq;
2531
2532         ret = msi_compose_msg(dev, irq, &msg);
2533         if (ret < 0) {
2534                 destroy_irq(irq);
2535                 return ret;
2536         }
2537
2538         set_irq_msi(irq, desc);
2539         write_msi_msg(irq, &msg);
2540
2541         set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq,
2542                                       "edge");
2543
2544         return 0;
2545 }
2546
2547 void arch_teardown_msi_irq(unsigned int irq)
2548 {
2549         destroy_irq(irq);
2550 }
2551
2552 #endif /* CONFIG_PCI_MSI */
2553
2554 /*
2555  * Hypertransport interrupt support
2556  */
2557 #ifdef CONFIG_HT_IRQ
2558
2559 #ifdef CONFIG_SMP
2560
2561 static void target_ht_irq(unsigned int irq, unsigned int dest)
2562 {
2563         struct ht_irq_msg msg;
2564         fetch_ht_irq_msg(irq, &msg);
2565
2566         msg.address_lo &= ~(HT_IRQ_LOW_DEST_ID_MASK);
2567         msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
2568
2569         msg.address_lo |= HT_IRQ_LOW_DEST_ID(dest);
2570         msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
2571
2572         write_ht_irq_msg(irq, &msg);
2573 }
2574
2575 static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
2576 {
2577         unsigned int dest;
2578         cpumask_t tmp;
2579
2580         cpus_and(tmp, mask, cpu_online_map);
2581         if (cpus_empty(tmp))
2582                 tmp = TARGET_CPUS;
2583
2584         cpus_and(mask, tmp, CPU_MASK_ALL);
2585
2586         dest = cpu_mask_to_apicid(mask);
2587
2588         target_ht_irq(irq, dest);
2589         irq_desc[irq].affinity = mask;
2590 }
2591 #endif
2592
2593 static struct irq_chip ht_irq_chip = {
2594         .name           = "PCI-HT",
2595         .mask           = mask_ht_irq,
2596         .unmask         = unmask_ht_irq,
2597         .ack            = ack_ioapic_irq,
2598 #ifdef CONFIG_SMP
2599         .set_affinity   = set_ht_irq_affinity,
2600 #endif
2601         .retrigger      = ioapic_retrigger_irq,
2602 };
2603
2604 int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
2605 {
2606         int vector;
2607
2608         vector = assign_irq_vector(irq);
2609         if (vector >= 0) {
2610                 struct ht_irq_msg msg;
2611                 unsigned dest;
2612                 cpumask_t tmp;
2613
2614                 cpus_clear(tmp);
2615                 cpu_set(vector >> 8, tmp);
2616                 dest = cpu_mask_to_apicid(tmp);
2617
2618                 msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
2619
2620                 msg.address_lo =
2621                         HT_IRQ_LOW_BASE |
2622                         HT_IRQ_LOW_DEST_ID(dest) |
2623                         HT_IRQ_LOW_VECTOR(vector) |
2624                         ((INT_DEST_MODE == 0) ?
2625                                 HT_IRQ_LOW_DM_PHYSICAL :
2626                                 HT_IRQ_LOW_DM_LOGICAL) |
2627                         HT_IRQ_LOW_RQEOI_EDGE |
2628                         ((INT_DELIVERY_MODE != dest_LowestPrio) ?
2629                                 HT_IRQ_LOW_MT_FIXED :
2630                                 HT_IRQ_LOW_MT_ARBITRATED) |
2631                         HT_IRQ_LOW_IRQ_MASKED;
2632
2633                 write_ht_irq_msg(irq, &msg);
2634
2635                 set_irq_chip_and_handler_name(irq, &ht_irq_chip,
2636                                               handle_edge_irq, "edge");
2637         }
2638         return vector;
2639 }
2640 #endif /* CONFIG_HT_IRQ */
2641
2642 /* --------------------------------------------------------------------------
2643                           ACPI-based IOAPIC Configuration
2644    -------------------------------------------------------------------------- */
2645
2646 #ifdef CONFIG_ACPI
2647
2648 int __init io_apic_get_unique_id (int ioapic, int apic_id)
2649 {
2650         union IO_APIC_reg_00 reg_00;
2651         static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
2652         physid_mask_t tmp;
2653         unsigned long flags;
2654         int i = 0;
2655
2656         /*
2657          * The P4 platform supports up to 256 APIC IDs on two separate APIC
2658          * buses (one for LAPICs, one for IOAPICs), where predecessors only
2659          * supports up to 16 on one shared APIC bus.
2660          *
2661          * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
2662          *      advantage of new APIC bus architecture.
2663          */
2664
2665         if (physids_empty(apic_id_map))
2666                 apic_id_map = ioapic_phys_id_map(phys_cpu_present_map);
2667
2668         spin_lock_irqsave(&ioapic_lock, flags);
2669         reg_00.raw = io_apic_read(ioapic, 0);
2670         spin_unlock_irqrestore(&ioapic_lock, flags);
2671
2672         if (apic_id >= get_physical_broadcast()) {
2673                 printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
2674                         "%d\n", ioapic, apic_id, reg_00.bits.ID);
2675                 apic_id = reg_00.bits.ID;
2676         }
2677
2678         /*
2679          * Every APIC in a system must have a unique ID or we get lots of nice
2680          * 'stuck on smp_invalidate_needed IPI wait' messages.
2681          */
2682         if (check_apicid_used(apic_id_map, apic_id)) {
2683
2684                 for (i = 0; i < get_physical_broadcast(); i++) {
2685                         if (!check_apicid_used(apic_id_map, i))
2686                                 break;
2687                 }
2688
2689                 if (i == get_physical_broadcast())
2690                         panic("Max apic_id exceeded!\n");
2691
2692                 printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
2693                         "trying %d\n", ioapic, apic_id, i);
2694
2695                 apic_id = i;
2696         }
2697
2698         tmp = apicid_to_cpu_present(apic_id);
2699         physids_or(apic_id_map, apic_id_map, tmp);
2700
2701         if (reg_00.bits.ID != apic_id) {
2702                 reg_00.bits.ID = apic_id;
2703
2704                 spin_lock_irqsave(&ioapic_lock, flags);
2705                 io_apic_write(ioapic, 0, reg_00.raw);
2706                 reg_00.raw = io_apic_read(ioapic, 0);
2707                 spin_unlock_irqrestore(&ioapic_lock, flags);
2708
2709                 /* Sanity check */
2710                 if (reg_00.bits.ID != apic_id) {
2711                         printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
2712                         return -1;
2713                 }
2714         }
2715
2716         apic_printk(APIC_VERBOSE, KERN_INFO
2717                         "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
2718
2719         return apic_id;
2720 }
2721
2722
2723 int __init io_apic_get_version (int ioapic)
2724 {
2725         union IO_APIC_reg_01    reg_01;
2726         unsigned long flags;
2727
2728         spin_lock_irqsave(&ioapic_lock, flags);
2729         reg_01.raw = io_apic_read(ioapic, 1);
2730         spin_unlock_irqrestore(&ioapic_lock, flags);
2731
2732         return reg_01.bits.version;
2733 }
2734
2735
2736 int __init io_apic_get_redir_entries (int ioapic)
2737 {
2738         union IO_APIC_reg_01    reg_01;
2739         unsigned long flags;
2740
2741         spin_lock_irqsave(&ioapic_lock, flags);
2742         reg_01.raw = io_apic_read(ioapic, 1);
2743         spin_unlock_irqrestore(&ioapic_lock, flags);
2744
2745         return reg_01.bits.entries;
2746 }
2747
2748
2749 int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
2750 {
2751         struct IO_APIC_route_entry entry;
2752
2753         if (!IO_APIC_IRQ(irq)) {
2754                 printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
2755                         ioapic);
2756                 return -EINVAL;
2757         }
2758
2759         /*
2760          * Generate a PCI IRQ routing entry and program the IOAPIC accordingly.
2761          * Note that we mask (disable) IRQs now -- these get enabled when the
2762          * corresponding device driver registers for this IRQ.
2763          */
2764
2765         memset(&entry,0,sizeof(entry));
2766
2767         entry.delivery_mode = INT_DELIVERY_MODE;
2768         entry.dest_mode = INT_DEST_MODE;
2769         entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
2770         entry.trigger = edge_level;
2771         entry.polarity = active_high_low;
2772         entry.mask  = 1;
2773
2774         /*
2775          * IRQs < 16 are already in the irq_2_pin[] map
2776          */
2777         if (irq >= 16)
2778                 add_pin_to_irq(irq, ioapic, pin);
2779
2780         entry.vector = assign_irq_vector(irq);
2781
2782         apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry "
2783                 "(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic,
2784                 mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
2785                 edge_level, active_high_low);
2786
2787         ioapic_register_intr(irq, entry.vector, edge_level);
2788
2789         if (!ioapic && (irq < 16))
2790                 disable_8259A_irq(irq);
2791
2792         ioapic_write_entry(ioapic, pin, entry);
2793
2794         return 0;
2795 }
2796
2797 int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
2798 {
2799         int i;
2800
2801         if (skip_ioapic_setup)
2802                 return -1;
2803
2804         for (i = 0; i < mp_irq_entries; i++)
2805                 if (mp_irqs[i].mpc_irqtype == mp_INT &&
2806                     mp_irqs[i].mpc_srcbusirq == bus_irq)
2807                         break;
2808         if (i >= mp_irq_entries)
2809                 return -1;
2810
2811         *trigger = irq_trigger(i);
2812         *polarity = irq_polarity(i);
2813         return 0;
2814 }
2815
2816 #endif /* CONFIG_ACPI */
2817
2818 static int __init parse_disable_timer_pin_1(char *arg)
2819 {
2820         disable_timer_pin_1 = 1;
2821         return 0;
2822 }
2823 early_param("disable_timer_pin_1", parse_disable_timer_pin_1);
2824
2825 static int __init parse_enable_timer_pin_1(char *arg)
2826 {
2827         disable_timer_pin_1 = -1;
2828         return 0;
2829 }
2830 early_param("enable_timer_pin_1", parse_enable_timer_pin_1);
2831
2832 static int __init parse_noapic(char *arg)
2833 {
2834         /* disable IO-APIC */
2835         disable_ioapic_setup();
2836         return 0;
2837 }
2838 early_param("noapic", parse_noapic);