git.oblomov.eu Git - linux-2.6/blob - drivers/net/tlan.c

   1 /*******************************************************************************
   2  *
   3  *  Linux ThunderLAN Driver
   4  *
   5  *  tlan.c
   6  *  by James Banks
   7  *
   8  *  (C) 1997-1998 Caldera, Inc.
   9  *  (C) 1998 James Banks
  10  *  (C) 1999-2001 Torben Mathiasen
  11  *  (C) 2002 Samuel Chessman
  12  *
  13  *  This software may be used and distributed according to the terms
  14  *  of the GNU General Public License, incorporated herein by reference.
  15  *
  16  ** Useful (if not required) reading:
  17  *
  18  *              Texas Instruments, ThunderLAN Programmer's Guide,
  19  *                      TI Literature Number SPWU013A
  20  *                      available in PDF format from www.ti.com
  21  *              Level One, LXT901 and LXT970 Data Sheets
  22  *                      available in PDF format from www.level1.com
  23  *              National Semiconductor, DP83840A Data Sheet
  24  *                      available in PDF format from www.national.com
  25  *              Microchip Technology, 24C01A/02A/04A Data Sheet
  26  *                      available in PDF format from www.microchip.com
  27  *
  28  * Change History
  29  *
  30  *      Tigran Aivazian <tigran@sco.com>:       TLan_PciProbe() now uses
  31  *                                              new PCI BIOS interface.
  32  *      Alan Cox        <alan@redhat.com>:      Fixed the out of memory
  33  *                                              handling.
  34  *
  35  *      Torben Mathiasen <torben.mathiasen@compaq.com> New Maintainer!
  36  *
  37  *      v1.1 Dec 20, 1999    - Removed linux version checking
  38  *                             Patch from Tigran Aivazian.
  39  *                           - v1.1 includes Alan's SMP updates.
  40  *                           - We still have problems on SMP though,
  41  *                             but I'm looking into that.
  42  *
  43  *      v1.2 Jan 02, 2000    - Hopefully fixed the SMP deadlock.
  44  *                           - Removed dependency of HZ being 100.
  45  *                           - We now allow higher priority timers to
  46  *                             overwrite timers like TLAN_TIMER_ACTIVITY
  47  *                             Patch from John Cagle <john.cagle@compaq.com>.
  48  *                           - Fixed a few compiler warnings.
  49  *
  50  *      v1.3 Feb 04, 2000    - Fixed the remaining HZ issues.
  51  *                           - Removed call to pci_present().
  52  *                           - Removed SA_INTERRUPT flag from irq handler.
  53  *                           - Added __init and __initdata to reduce resisdent
  54  *                             code size.
  55  *                           - Driver now uses module_init/module_exit.
  56  *                           - Rewrote init_module and tlan_probe to
  57  *                             share a lot more code. We now use tlan_probe
  58  *                             with builtin and module driver.
  59  *                           - Driver ported to new net API.
  60  *                           - tlan.txt has been reworked to reflect current
  61  *                             driver (almost)
  62  *                           - Other minor stuff
  63  *
  64  *      v1.4 Feb 10, 2000    - Updated with more changes required after Dave's
  65  *                             network cleanup in 2.3.43pre7 (Tigran & myself)
  66  *                           - Minor stuff.
  67  *
  68  *      v1.5 March 22, 2000  - Fixed another timer bug that would hang the driver
  69  *                             if no cable/link were present.
  70  *                           - Cosmetic changes.
  71  *                           - TODO: Port completely to new PCI/DMA API
  72  *                                   Auto-Neg fallback.
  73  *
  74  *      v1.6 April 04, 2000  - Fixed driver support for kernel-parameters. Haven't
  75  *                             tested it though, as the kernel support is currently
  76  *                             broken (2.3.99p4p3).
  77  *                           - Updated tlan.txt accordingly.
  78  *                           - Adjusted minimum/maximum frame length.
  79  *                           - There is now a TLAN website up at
  80  *                             http://tlan.kernel.dk
  81  *
  82  *      v1.7 April 07, 2000  - Started to implement custom ioctls. Driver now
  83  *                             reports PHY information when used with Donald
  84  *                             Beckers userspace MII diagnostics utility.
  85  *
  86  *      v1.8 April 23, 2000  - Fixed support for forced speed/duplex settings.
  87  *                           - Added link information to Auto-Neg and forced
  88  *                             modes. When NIC operates with auto-neg the driver
  89  *                             will report Link speed & duplex modes as well as
  90  *                             link partner abilities. When forced link is used,
  91  *                             the driver will report status of the established
  92  *                             link.
  93  *                             Please read tlan.txt for additional information.
  94  *                           - Removed call to check_region(), and used
  95  *                             return value of request_region() instead.
  96  *
  97  *      v1.8a May 28, 2000   - Minor updates.
  98  *
  99  *      v1.9 July 25, 2000   - Fixed a few remaining Full-Duplex issues.
 100  *                           - Updated with timer fixes from Andrew Morton.
 101  *                           - Fixed module race in TLan_Open.
 102  *                           - Added routine to monitor PHY status.
 103  *                           - Added activity led support for Proliant devices.
 104  *
 105  *      v1.10 Aug 30, 2000   - Added support for EISA based tlan controllers
 106  *                             like the Compaq NetFlex3/E.
 107  *                           - Rewrote tlan_probe to better handle multiple
 108  *                             bus probes. Probing and device setup is now
 109  *                             done through TLan_Probe and TLan_init_one. Actual
 110  *                             hardware probe is done with kernel API and
 111  *                             TLan_EisaProbe.
 112  *                           - Adjusted debug information for probing.
 113  *                           - Fixed bug that would cause general debug information
 114  *                             to be printed after driver removal.
 115  *                           - Added transmit timeout handling.
 116  *                           - Fixed OOM return values in tlan_probe.
 117  *                           - Fixed possible mem leak in tlan_exit
 118  *                             (now tlan_remove_one).
 119  *                           - Fixed timer bug in TLan_phyMonitor.
 120  *                           - This driver version is alpha quality, please
 121  *                             send me any bug issues you may encounter.
 122  *
 123  *      v1.11 Aug 31, 2000   - Do not try to register irq 0 if no irq line was
 124  *                             set for EISA cards.
 125  *                           - Added support for NetFlex3/E with nibble-rate
 126  *                             10Base-T PHY. This is untestet as I haven't got
 127  *                             one of these cards.
 128  *                           - Fixed timer being added twice.
 129  *                           - Disabled PhyMonitoring by default as this is
 130  *                             work in progress. Define MONITOR to enable it.
 131  *                           - Now we don't display link info with PHYs that
 132  *                             doesn't support it (level1).
 133  *                           - Incresed tx_timeout beacuse of auto-neg.
 134  *                           - Adjusted timers for forced speeds.
 135  *
 136  *      v1.12 Oct 12, 2000   - Minor fixes (memleak, init, etc.)
 137  *
 138  *      v1.13 Nov 28, 2000   - Stop flooding console with auto-neg issues
 139  *                             when link can't be established.
 140  *                           - Added the bbuf option as a kernel parameter.
 141  *                           - Fixed ioaddr probe bug.
 142  *                           - Fixed stupid deadlock with MII interrupts.
 143  *                           - Added support for speed/duplex selection with
 144  *                             multiple nics.
 145  *                           - Added partly fix for TX Channel lockup with
 146  *                             TLAN v1.0 silicon. This needs to be investigated
 147  *                             further.
 148  *
 149  *      v1.14 Dec 16, 2000   - Added support for servicing multiple frames per.
 150  *                             interrupt. Thanks goes to
 151  *                             Adam Keys <adam@ti.com>
 152  *                             Denis Beaudoin <dbeaudoin@ti.com>
 153  *                             for providing the patch.
 154  *                           - Fixed auto-neg output when using multiple
 155  *                             adapters.
 156  *                           - Converted to use new taskq interface.
 157  *
 158  *      v1.14a Jan 6, 2001   - Minor adjustments (spinlocks, etc.)
 159  *
 160  *      Samuel Chessman <chessman@tux.org> New Maintainer!
 161  *
 162  *      v1.15 Apr 4, 2002    - Correct operation when aui=1 to be
 163  *                             10T half duplex no loopback
 164  *                             Thanks to Gunnar Eikman
 165  *******************************************************************************/
 166
 167 #include <linux/module.h>
 168 #include <linux/init.h>
 169 #include <linux/ioport.h>
 170 #include <linux/eisa.h>
 171 #include <linux/pci.h>
 172 #include <linux/dma-mapping.h>
 173 #include <linux/netdevice.h>
 174 #include <linux/etherdevice.h>
 175 #include <linux/delay.h>
 176 #include <linux/spinlock.h>
 177 #include <linux/workqueue.h>
 178 #include <linux/mii.h>
 179
 180 #include "tlan.h"
 181
 182 typedef u32 (TLanIntVectorFunc)( struct net_device *, u16 );
 183
 184
 185 /* For removing EISA devices */
 186 static  struct net_device       *TLan_Eisa_Devices;
 187
 188 static  int             TLanDevicesInstalled;
 189
 190 /* Set speed, duplex and aui settings */
 191 static  int aui[MAX_TLAN_BOARDS];
 192 static  int duplex[MAX_TLAN_BOARDS];
 193 static  int speed[MAX_TLAN_BOARDS];
 194 static  int boards_found;
 195 module_param_array(aui, int, NULL, 0);
 196 module_param_array(duplex, int, NULL, 0);
 197 module_param_array(speed, int, NULL, 0);
 198 MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)");
 199 MODULE_PARM_DESC(duplex, "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)");
 200 MODULE_PARM_DESC(speed, "ThunderLAN port speen setting(s) (0,10,100)");
 201
 202 MODULE_AUTHOR("Maintainer: Samuel Chessman <chessman@tux.org>");
 203 MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters");
 204 MODULE_LICENSE("GPL");
 205
 206
 207 /* Define this to enable Link beat monitoring */
 208 #undef MONITOR
 209
 210 /* Turn on debugging. See Documentation/networking/tlan.txt for details */
 211 static  int             debug;
 212 module_param(debug, int, 0);
 213 MODULE_PARM_DESC(debug, "ThunderLAN debug mask");
 214
 215 static  int             bbuf;
 216 module_param(bbuf, int, 0);
 217 MODULE_PARM_DESC(bbuf, "ThunderLAN use big buffer (0-1)");
 218
 219 static  const char TLanSignature[] = "TLAN";
 220 static  const char tlan_banner[] = "ThunderLAN driver v1.15\n";
 221 static  int tlan_have_pci;
 222 static  int tlan_have_eisa;
 223
 224 static const char *media[] = {
 225         "10BaseT-HD ", "10BaseT-FD ","100baseTx-HD ",
 226         "100baseTx-FD", "100baseT4", NULL
 227 };
 228
 229 static struct board {
 230         const char      *deviceLabel;
 231         u32             flags;
 232         u16             addrOfs;
 233 } board_info[] = {
 234         { "Compaq Netelligent 10 T PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
 235         { "Compaq Netelligent 10/100 TX PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
 236         { "Compaq Integrated NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
 237         { "Compaq NetFlex-3/P",
 238           TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
 239         { "Compaq NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
 240         { "Compaq Netelligent Integrated 10/100 TX UTP",
 241           TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
 242         { "Compaq Netelligent Dual 10/100 TX PCI UTP", TLAN_ADAPTER_NONE, 0x83 },
 243         { "Compaq Netelligent 10/100 TX Embedded UTP", TLAN_ADAPTER_NONE, 0x83 },
 244         { "Olicom OC-2183/2185", TLAN_ADAPTER_USE_INTERN_10, 0x83 },
 245         { "Olicom OC-2325", TLAN_ADAPTER_UNMANAGED_PHY, 0xF8 },
 246         { "Olicom OC-2326", TLAN_ADAPTER_USE_INTERN_10, 0xF8 },
 247         { "Compaq Netelligent 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
 248         { "Compaq Netelligent 10 T/2 PCI UTP/Coax", TLAN_ADAPTER_NONE, 0x83 },
 249         { "Compaq NetFlex-3/E",
 250           TLAN_ADAPTER_ACTIVITY_LED |   /* EISA card */
 251           TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
 252         { "Compaq NetFlex-3/E", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, /* EISA card */
 253 };
 254
 255 static struct pci_device_id tlan_pci_tbl[] = {
 256         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL10,
 257                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 258         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100,
 259                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
 260         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3I,
 261                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
 262         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_THUNDER,
 263                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
 264         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3B,
 265                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
 266         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100PI,
 267                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 },
 268         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100D,
 269                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 },
 270         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100I,
 271                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 },
 272         { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2183,
 273                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
 274         { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2325,
 275                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 },
 276         { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2326,
 277                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 },
 278         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_100_WS_5100,
 279                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 },
 280         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_T2,
 281                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 },
 282         { 0,}
 283 };
 284 MODULE_DEVICE_TABLE(pci, tlan_pci_tbl);
 285
 286 static void     TLan_EisaProbe( void );
 287 static void     TLan_Eisa_Cleanup( void );
 288 static int      TLan_Init( struct net_device * );
 289 static int      TLan_Open( struct net_device *dev );
 290 static int      TLan_StartTx( struct sk_buff *, struct net_device *);
 291 static irqreturn_t TLan_HandleInterrupt( int, void *);
 292 static int      TLan_Close( struct net_device *);
 293 static struct   net_device_stats *TLan_GetStats( struct net_device *);
 294 static void     TLan_SetMulticastList( struct net_device *);
 295 static int      TLan_ioctl( struct net_device *dev, struct ifreq *rq, int cmd);
 296 static int      TLan_probe1( struct pci_dev *pdev, long ioaddr,
 297                              int irq, int rev, const struct pci_device_id *ent);
 298 static void     TLan_tx_timeout( struct net_device *dev);
 299 static void     TLan_tx_timeout_work(struct work_struct *work);
 300 static int      tlan_init_one( struct pci_dev *pdev, const struct pci_device_id *ent);
 301
 302 static u32      TLan_HandleTxEOF( struct net_device *, u16 );
 303 static u32      TLan_HandleStatOverflow( struct net_device *, u16 );
 304 static u32      TLan_HandleRxEOF( struct net_device *, u16 );
 305 static u32      TLan_HandleDummy( struct net_device *, u16 );
 306 static u32      TLan_HandleTxEOC( struct net_device *, u16 );
 307 static u32      TLan_HandleStatusCheck( struct net_device *, u16 );
 308 static u32      TLan_HandleRxEOC( struct net_device *, u16 );
 309
 310 static void     TLan_Timer( unsigned long );
 311
 312 static void     TLan_ResetLists( struct net_device * );
 313 static void     TLan_FreeLists( struct net_device * );
 314 static void     TLan_PrintDio( u16 );
 315 static void     TLan_PrintList( TLanList *, char *, int );
 316 static void     TLan_ReadAndClearStats( struct net_device *, int );
 317 static void     TLan_ResetAdapter( struct net_device * );
 318 static void     TLan_FinishReset( struct net_device * );
 319 static void     TLan_SetMac( struct net_device *, int areg, char *mac );
 320
 321 static void     TLan_PhyPrint( struct net_device * );
 322 static void     TLan_PhyDetect( struct net_device * );
 323 static void     TLan_PhyPowerDown( struct net_device * );
 324 static void     TLan_PhyPowerUp( struct net_device * );
 325 static void     TLan_PhyReset( struct net_device * );
 326 static void     TLan_PhyStartLink( struct net_device * );
 327 static void     TLan_PhyFinishAutoNeg( struct net_device * );
 328 #ifdef MONITOR
 329 static void     TLan_PhyMonitor( struct net_device * );
 330 #endif
 331
 332 /*
 333 static int      TLan_PhyNop( struct net_device * );
 334 static int      TLan_PhyInternalCheck( struct net_device * );
 335 static int      TLan_PhyInternalService( struct net_device * );
 336 static int      TLan_PhyDp83840aCheck( struct net_device * );
 337 */
 338
 339 static int      TLan_MiiReadReg( struct net_device *, u16, u16, u16 * );
 340 static void     TLan_MiiSendData( u16, u32, unsigned );
 341 static void     TLan_MiiSync( u16 );
 342 static void     TLan_MiiWriteReg( struct net_device *, u16, u16, u16 );
 343
 344 static void     TLan_EeSendStart( u16 );
 345 static int      TLan_EeSendByte( u16, u8, int );
 346 static void     TLan_EeReceiveByte( u16, u8 *, int );
 347 static int      TLan_EeReadByte( struct net_device *, u8, u8 * );
 348
 349
 350 static inline void
 351 TLan_StoreSKB( struct tlan_list_tag *tag, struct sk_buff *skb)
 352 {
 353         unsigned long addr = (unsigned long)skb;
 354         tag->buffer[9].address = addr;
 355         tag->buffer[8].address = upper_32_bits(addr);
 356 }
 357
 358 static inline struct sk_buff *
 359 TLan_GetSKB( const struct tlan_list_tag *tag)
 360 {
 361         unsigned long addr;
 362
 363         addr = tag->buffer[9].address;
 364         addr |= (tag->buffer[8].address << 16) << 16;
 365         return (struct sk_buff *) addr;
 366 }
 367
 368
 369 static TLanIntVectorFunc *TLanIntVector[TLAN_INT_NUMBER_OF_INTS] = {
 370         NULL,
 371         TLan_HandleTxEOF,
 372         TLan_HandleStatOverflow,
 373         TLan_HandleRxEOF,
 374         TLan_HandleDummy,
 375         TLan_HandleTxEOC,
 376         TLan_HandleStatusCheck,
 377         TLan_HandleRxEOC
 378 };
 379
 380 static inline void
 381 TLan_SetTimer( struct net_device *dev, u32 ticks, u32 type )
 382 {
 383         TLanPrivateInfo *priv = netdev_priv(dev);
 384         unsigned long flags = 0;
 385
 386         if (!in_irq())
 387                 spin_lock_irqsave(&priv->lock, flags);
 388         if ( priv->timer.function != NULL &&
 389                 priv->timerType != TLAN_TIMER_ACTIVITY ) {
 390                 if (!in_irq())
 391                         spin_unlock_irqrestore(&priv->lock, flags);
 392                 return;
 393         }
 394         priv->timer.function = &TLan_Timer;
 395         if (!in_irq())
 396                 spin_unlock_irqrestore(&priv->lock, flags);
 397
 398         priv->timer.data = (unsigned long) dev;
 399         priv->timerSetAt = jiffies;
 400         priv->timerType = type;
 401         mod_timer(&priv->timer, jiffies + ticks);
 402
 403 } /* TLan_SetTimer */
 404
 405
 406 /*****************************************************************************
 407 ******************************************************************************
 408
 409         ThunderLAN Driver Primary Functions
 410
 411         These functions are more or less common to all Linux network drivers.
 412
 413 ******************************************************************************
 414 *****************************************************************************/
 415
 416
 417
 418
 419
 420         /***************************************************************
 421          *      tlan_remove_one
 422          *
 423          *      Returns:
 424          *              Nothing
 425          *      Parms:
 426          *              None
 427          *
 428          *      Goes through the TLanDevices list and frees the device
 429          *      structs and memory associated with each device (lists
 430          *      and buffers).  It also ureserves the IO port regions
 431          *      associated with this device.
 432          *
 433          **************************************************************/
 434
 435
 436 static void __devexit tlan_remove_one( struct pci_dev *pdev)
 437 {
 438         struct net_device *dev = pci_get_drvdata( pdev );
 439         TLanPrivateInfo *priv = netdev_priv(dev);
 440
 441         unregister_netdev( dev );
 442
 443         if ( priv->dmaStorage ) {
 444                 pci_free_consistent(priv->pciDev,
 445                                     priv->dmaSize, priv->dmaStorage,
 446                                     priv->dmaStorageDMA );
 447         }
 448
 449 #ifdef CONFIG_PCI
 450         pci_release_regions(pdev);
 451 #endif
 452
 453         free_netdev( dev );
 454
 455         pci_set_drvdata( pdev, NULL );
 456 }
 457
 458 static struct pci_driver tlan_driver = {
 459         .name           = "tlan",
 460         .id_table       = tlan_pci_tbl,
 461         .probe          = tlan_init_one,
 462         .remove         = __devexit_p(tlan_remove_one),
 463 };
 464
 465 static int __init tlan_probe(void)
 466 {
 467         int rc = -ENODEV;
 468
 469         printk(KERN_INFO "%s", tlan_banner);
 470
 471         TLAN_DBG(TLAN_DEBUG_PROBE, "Starting PCI Probe....\n");
 472
 473         /* Use new style PCI probing. Now the kernel will
 474            do most of this for us */
 475         rc = pci_register_driver(&tlan_driver);
 476
 477         if (rc != 0) {
 478                 printk(KERN_ERR "TLAN: Could not register pci driver.\n");
 479                 goto err_out_pci_free;
 480         }
 481
 482         TLAN_DBG(TLAN_DEBUG_PROBE, "Starting EISA Probe....\n");
 483         TLan_EisaProbe();
 484
 485         printk(KERN_INFO "TLAN: %d device%s installed, PCI: %d  EISA: %d\n",
 486                  TLanDevicesInstalled, TLanDevicesInstalled == 1 ? "" : "s",
 487                  tlan_have_pci, tlan_have_eisa);
 488
 489         if (TLanDevicesInstalled == 0) {
 490                 rc = -ENODEV;
 491                 goto  err_out_pci_unreg;
 492         }
 493         return 0;
 494
 495 err_out_pci_unreg:
 496         pci_unregister_driver(&tlan_driver);
 497 err_out_pci_free:
 498         return rc;
 499 }
 500
 501
 502 static int __devinit tlan_init_one( struct pci_dev *pdev,
 503                                     const struct pci_device_id *ent)
 504 {
 505         return TLan_probe1( pdev, -1, -1, 0, ent);
 506 }
 507
 508
 509 /*
 510         ***************************************************************
 511          *      tlan_probe1
 512          *
 513          *      Returns:
 514          *              0 on success, error code on error
 515          *      Parms:
 516          *              none
 517          *
 518          *      The name is lower case to fit in with all the rest of
 519          *      the netcard_probe names.  This function looks for
 520          *      another TLan based adapter, setting it up with the
 521          *      allocated device struct if one is found.
 522          *      tlan_probe has been ported to the new net API and
 523          *      now allocates its own device structure. This function
 524          *      is also used by modules.
 525          *
 526          **************************************************************/
 527
 528 static int __devinit TLan_probe1(struct pci_dev *pdev,
 529                                  long ioaddr, int irq, int rev,
 530                                  const struct pci_device_id *ent )
 531 {
 532
 533         struct net_device  *dev;
 534         TLanPrivateInfo    *priv;
 535         u16                device_id;
 536         int                reg, rc = -ENODEV;
 537
 538 #ifdef CONFIG_PCI
 539         if (pdev) {
 540                 rc = pci_enable_device(pdev);
 541                 if (rc)
 542                         return rc;
 543
 544                 rc = pci_request_regions(pdev, TLanSignature);
 545                 if (rc) {
 546                         printk(KERN_ERR "TLAN: Could not reserve IO regions\n");
 547                         goto err_out;
 548                 }
 549         }
 550 #endif  /*  CONFIG_PCI  */
 551
 552         dev = alloc_etherdev(sizeof(TLanPrivateInfo));
 553         if (dev == NULL) {
 554                 printk(KERN_ERR "TLAN: Could not allocate memory for device.\n");
 555                 rc = -ENOMEM;
 556                 goto err_out_regions;
 557         }
 558         SET_NETDEV_DEV(dev, &pdev->dev);
 559
 560         priv = netdev_priv(dev);
 561
 562         priv->pciDev = pdev;
 563         priv->dev = dev;
 564
 565         /* Is this a PCI device? */
 566         if (pdev) {
 567                 u32                pci_io_base = 0;
 568
 569                 priv->adapter = &board_info[ent->driver_data];
 570
 571                 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 572                 if (rc) {
 573                         printk(KERN_ERR "TLAN: No suitable PCI mapping available.\n");
 574                         goto err_out_free_dev;
 575                 }
 576
 577                 for ( reg= 0; reg <= 5; reg ++ ) {
 578                         if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) {
 579                                 pci_io_base = pci_resource_start(pdev, reg);
 580                                 TLAN_DBG( TLAN_DEBUG_GNRL, "IO mapping is available at %x.\n",
 581                                                 pci_io_base);
 582                                 break;
 583                         }
 584                 }
 585                 if (!pci_io_base) {
 586                         printk(KERN_ERR "TLAN: No IO mappings available\n");
 587                         rc = -EIO;
 588                         goto err_out_free_dev;
 589                 }
 590
 591                 dev->base_addr = pci_io_base;
 592                 dev->irq = pdev->irq;
 593                 priv->adapterRev = pdev->revision;
 594                 pci_set_master(pdev);
 595                 pci_set_drvdata(pdev, dev);
 596
 597         } else  {     /* EISA card */
 598                 /* This is a hack. We need to know which board structure
 599                  * is suited for this adapter */
 600                 device_id = inw(ioaddr + EISA_ID2);
 601                 priv->is_eisa = 1;
 602                 if (device_id == 0x20F1) {
 603                         priv->adapter = &board_info[13];        /* NetFlex-3/E */
 604                         priv->adapterRev = 23;                  /* TLAN 2.3 */
 605                 } else {
 606                         priv->adapter = &board_info[14];
 607                         priv->adapterRev = 10;                  /* TLAN 1.0 */
 608                 }
 609                 dev->base_addr = ioaddr;
 610                 dev->irq = irq;
 611         }
 612
 613         /* Kernel parameters */
 614         if (dev->mem_start) {
 615                 priv->aui    = dev->mem_start & 0x01;
 616                 priv->duplex = ((dev->mem_start & 0x06) == 0x06) ? 0
 617                         : (dev->mem_start & 0x06) >> 1;
 618                 priv->speed  = ((dev->mem_start & 0x18) == 0x18) ? 0
 619                         : (dev->mem_start & 0x18) >> 3;
 620
 621                 if (priv->speed == 0x1) {
 622                         priv->speed = TLAN_SPEED_10;
 623                 } else if (priv->speed == 0x2) {
 624                         priv->speed = TLAN_SPEED_100;
 625                 }
 626                 debug = priv->debug = dev->mem_end;
 627         } else {
 628                 priv->aui    = aui[boards_found];
 629                 priv->speed  = speed[boards_found];
 630                 priv->duplex = duplex[boards_found];
 631                 priv->debug = debug;
 632         }
 633
 634         /* This will be used when we get an adapter error from
 635          * within our irq handler */
 636         INIT_WORK(&priv->tlan_tqueue, TLan_tx_timeout_work);
 637
 638         spin_lock_init(&priv->lock);
 639
 640         rc = TLan_Init(dev);
 641         if (rc) {
 642                 printk(KERN_ERR "TLAN: Could not set up device.\n");
 643                 goto err_out_free_dev;
 644         }
 645
 646         rc = register_netdev(dev);
 647         if (rc) {
 648                 printk(KERN_ERR "TLAN: Could not register device.\n");
 649                 goto err_out_uninit;
 650         }
 651
 652
 653         TLanDevicesInstalled++;
 654         boards_found++;
 655
 656         /* pdev is NULL if this is an EISA device */
 657         if (pdev)
 658                 tlan_have_pci++;
 659         else {
 660                 priv->nextDevice = TLan_Eisa_Devices;
 661                 TLan_Eisa_Devices = dev;
 662                 tlan_have_eisa++;
 663         }
 664
 665         printk(KERN_INFO "TLAN: %s irq=%2d, io=%04x, %s, Rev. %d\n",
 666                         dev->name,
 667                         (int) dev->irq,
 668                         (int) dev->base_addr,
 669                         priv->adapter->deviceLabel,
 670                         priv->adapterRev);
 671         return 0;
 672
 673 err_out_uninit:
 674         pci_free_consistent(priv->pciDev, priv->dmaSize, priv->dmaStorage,
 675                             priv->dmaStorageDMA );
 676 err_out_free_dev:
 677         free_netdev(dev);
 678 err_out_regions:
 679 #ifdef CONFIG_PCI
 680         if (pdev)
 681                 pci_release_regions(pdev);
 682 #endif
 683 err_out:
 684         if (pdev)
 685                 pci_disable_device(pdev);
 686         return rc;
 687 }
 688
 689
 690 static void TLan_Eisa_Cleanup(void)
 691 {
 692         struct net_device *dev;
 693         TLanPrivateInfo *priv;
 694
 695         while( tlan_have_eisa ) {
 696                 dev = TLan_Eisa_Devices;
 697                 priv = netdev_priv(dev);
 698                 if (priv->dmaStorage) {
 699                         pci_free_consistent(priv->pciDev, priv->dmaSize,
 700                                             priv->dmaStorage, priv->dmaStorageDMA );
 701                 }
 702                 release_region( dev->base_addr, 0x10);
 703                 unregister_netdev( dev );
 704                 TLan_Eisa_Devices = priv->nextDevice;
 705                 free_netdev( dev );
 706                 tlan_have_eisa--;
 707         }
 708 }
 709
 710
 711 static void __exit tlan_exit(void)
 712 {
 713         pci_unregister_driver(&tlan_driver);
 714
 715         if (tlan_have_eisa)
 716                 TLan_Eisa_Cleanup();
 717
 718 }
 719
 720
 721 /* Module loading/unloading */
 722 module_init(tlan_probe);
 723 module_exit(tlan_exit);
 724
 725
 726
 727         /**************************************************************
 728          *      TLan_EisaProbe
 729          *
 730          *      Returns: 0 on success, 1 otherwise
 731          *
 732          *      Parms:   None
 733          *
 734          *
 735          *      This functions probes for EISA devices and calls
 736          *      TLan_probe1 when one is found.
 737          *
 738          *************************************************************/
 739
 740 static void  __init TLan_EisaProbe (void)
 741 {
 742         long    ioaddr;
 743         int     rc = -ENODEV;
 744         int     irq;
 745         u16     device_id;
 746
 747         if (!EISA_bus) {
 748                 TLAN_DBG(TLAN_DEBUG_PROBE, "No EISA bus present\n");
 749                 return;
 750         }
 751
 752         /* Loop through all slots of the EISA bus */
 753         for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) {
 754
 755         TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n",
 756                  (int) ioaddr + 0xC80, inw(ioaddr + EISA_ID));
 757         TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n",
 758                  (int) ioaddr + 0xC82, inw(ioaddr + EISA_ID2));
 759
 760
 761                 TLAN_DBG(TLAN_DEBUG_PROBE, "Probing for EISA adapter at IO: 0x%4x : ",
 762                                         (int) ioaddr);
 763                 if (request_region(ioaddr, 0x10, TLanSignature) == NULL)
 764                         goto out;
 765
 766                 if (inw(ioaddr + EISA_ID) != 0x110E) {
 767                         release_region(ioaddr, 0x10);
 768                         goto out;
 769                 }
 770
 771                 device_id = inw(ioaddr + EISA_ID2);
 772                 if (device_id !=  0x20F1 && device_id != 0x40F1) {
 773                         release_region (ioaddr, 0x10);
 774                         goto out;
 775                 }
 776
 777                 if (inb(ioaddr + EISA_CR) != 0x1) {     /* Check if adapter is enabled */
 778                         release_region (ioaddr, 0x10);
 779                         goto out2;
 780                 }
 781
 782                 if (debug == 0x10)
 783                         printk("Found one\n");
 784
 785
 786                 /* Get irq from board */
 787                 switch (inb(ioaddr + 0xCC0)) {
 788                         case(0x10):
 789                                 irq=5;
 790                                 break;
 791                         case(0x20):
 792                                 irq=9;
 793                                 break;
 794                         case(0x40):
 795                                 irq=10;
 796                                 break;
 797                         case(0x80):
 798                                 irq=11;
 799                                 break;
 800                         default:
 801                                 goto out;
 802                 }
 803
 804
 805                 /* Setup the newly found eisa adapter */
 806                 rc = TLan_probe1( NULL, ioaddr, irq,
 807                                         12, NULL);
 808                 continue;
 809
 810                 out:
 811                         if (debug == 0x10)
 812                                 printk("None found\n");
 813                         continue;
 814
 815                 out2:   if (debug == 0x10)
 816                                 printk("Card found but it is not enabled, skipping\n");
 817                         continue;
 818
 819         }
 820
 821 } /* TLan_EisaProbe */
 822
 823 #ifdef CONFIG_NET_POLL_CONTROLLER
 824 static void TLan_Poll(struct net_device *dev)
 825 {
 826         disable_irq(dev->irq);
 827         TLan_HandleInterrupt(dev->irq, dev);
 828         enable_irq(dev->irq);
 829 }
 830 #endif
 831
 832
 833
 834
 835         /***************************************************************
 836          *      TLan_Init
 837          *
 838          *      Returns:
 839          *              0 on success, error code otherwise.
 840          *      Parms:
 841          *              dev     The structure of the device to be
 842          *                      init'ed.
 843          *
 844          *      This function completes the initialization of the
 845          *      device structure and driver.  It reserves the IO
 846          *      addresses, allocates memory for the lists and bounce
 847          *      buffers, retrieves the MAC address from the eeprom
 848          *      and assignes the device's methods.
 849          *
 850          **************************************************************/
 851
 852 static int TLan_Init( struct net_device *dev )
 853 {
 854         int             dma_size;
 855         int             err;
 856         int             i;
 857         TLanPrivateInfo *priv;
 858
 859         priv = netdev_priv(dev);
 860
 861         if ( bbuf ) {
 862                 dma_size = ( TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS )
 863                    * ( sizeof(TLanList) + TLAN_MAX_FRAME_SIZE );
 864         } else {
 865                 dma_size = ( TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS )
 866                    * ( sizeof(TLanList) );
 867         }
 868         priv->dmaStorage = pci_alloc_consistent(priv->pciDev,
 869                                                 dma_size, &priv->dmaStorageDMA);
 870         priv->dmaSize = dma_size;
 871
 872         if ( priv->dmaStorage == NULL ) {
 873                 printk(KERN_ERR "TLAN:  Could not allocate lists and buffers for %s.\n",
 874                         dev->name );
 875                 return -ENOMEM;
 876         }
 877         memset( priv->dmaStorage, 0, dma_size );
 878         priv->rxList = (TLanList *) ALIGN((unsigned long)priv->dmaStorage, 8);
 879         priv->rxListDMA = ALIGN(priv->dmaStorageDMA, 8);
 880         priv->txList = priv->rxList + TLAN_NUM_RX_LISTS;
 881         priv->txListDMA = priv->rxListDMA + sizeof(TLanList) * TLAN_NUM_RX_LISTS;
 882
 883         if ( bbuf ) {
 884                 priv->rxBuffer = (u8 *) ( priv->txList + TLAN_NUM_TX_LISTS );
 885                 priv->rxBufferDMA =priv->txListDMA
 886                         + sizeof(TLanList) * TLAN_NUM_TX_LISTS;
 887                 priv->txBuffer = priv->rxBuffer
 888                         + ( TLAN_NUM_RX_LISTS * TLAN_MAX_FRAME_SIZE );
 889                 priv->txBufferDMA = priv->rxBufferDMA
 890                         + ( TLAN_NUM_RX_LISTS * TLAN_MAX_FRAME_SIZE );
 891         }
 892
 893         err = 0;
 894         for ( i = 0;  i < 6 ; i++ )
 895                 err |= TLan_EeReadByte( dev,
 896                                         (u8) priv->adapter->addrOfs + i,
 897                                         (u8 *) &dev->dev_addr[i] );
 898         if ( err ) {
 899                 printk(KERN_ERR "TLAN: %s: Error reading MAC from eeprom: %d\n",
 900                         dev->name,
 901                         err );
 902         }
 903         dev->addr_len = 6;
 904
 905         netif_carrier_off(dev);
 906
 907         /* Device methods */
 908         dev->open = &TLan_Open;
 909         dev->hard_start_xmit = &TLan_StartTx;
 910         dev->stop = &TLan_Close;
 911         dev->get_stats = &TLan_GetStats;
 912         dev->set_multicast_list = &TLan_SetMulticastList;
 913         dev->do_ioctl = &TLan_ioctl;
 914 #ifdef CONFIG_NET_POLL_CONTROLLER
 915         dev->poll_controller = &TLan_Poll;
 916 #endif
 917         dev->tx_timeout = &TLan_tx_timeout;
 918         dev->watchdog_timeo = TX_TIMEOUT;
 919
 920         return 0;
 921
 922 } /* TLan_Init */
 923
 924
 925
 926
 927         /***************************************************************
 928          *      TLan_Open
 929          *
 930          *      Returns:
 931          *              0 on success, error code otherwise.
 932          *      Parms:
 933          *              dev     Structure of device to be opened.
 934          *
 935          *      This routine puts the driver and TLAN adapter in a
 936          *      state where it is ready to send and receive packets.
 937          *      It allocates the IRQ, resets and brings the adapter
 938          *      out of reset, and allows interrupts.  It also delays
 939          *      the startup for autonegotiation or sends a Rx GO
 940          *      command to the adapter, as appropriate.
 941          *
 942          **************************************************************/
 943
 944 static int TLan_Open( struct net_device *dev )
 945 {
 946         TLanPrivateInfo *priv = netdev_priv(dev);
 947         int             err;
 948
 949         priv->tlanRev = TLan_DioRead8( dev->base_addr, TLAN_DEF_REVISION );
 950         err = request_irq( dev->irq, TLan_HandleInterrupt, IRQF_SHARED,
 951                            dev->name, dev );
 952
 953         if ( err ) {
 954                 pr_err("TLAN:  Cannot open %s because IRQ %d is already in use.\n",
 955                        dev->name, dev->irq );
 956                 return err;
 957         }
 958
 959         init_timer(&priv->timer);
 960         netif_start_queue(dev);
 961
 962         /* NOTE: It might not be necessary to read the stats before a
 963                          reset if you don't care what the values are.
 964         */
 965         TLan_ResetLists( dev );
 966         TLan_ReadAndClearStats( dev, TLAN_IGNORE );
 967         TLan_ResetAdapter( dev );
 968
 969         TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Opened.  TLAN Chip Rev: %x\n",
 970                   dev->name, priv->tlanRev );
 971
 972         return 0;
 973
 974 } /* TLan_Open */
 975
 976
 977
 978         /**************************************************************
 979          *      TLan_ioctl
 980          *
 981          *      Returns:
 982          *              0 on success, error code otherwise
 983          *      Params:
 984          *              dev     structure of device to receive ioctl.
 985          *
 986          *              rq      ifreq structure to hold userspace data.
 987          *
 988          *              cmd     ioctl command.
 989          *
 990          *
 991          *************************************************************/
 992
 993 static int TLan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 994 {
 995         TLanPrivateInfo *priv = netdev_priv(dev);
 996         struct mii_ioctl_data *data = if_mii(rq);
 997         u32 phy   = priv->phy[priv->phyNum];
 998
 999         if (!priv->phyOnline)
1000                 return -EAGAIN;
1001
1002         switch(cmd) {
1003         case SIOCGMIIPHY:               /* Get address of MII PHY in use. */
1004                         data->phy_id = phy;
1005
1006
1007         case SIOCGMIIREG:               /* Read MII PHY register. */
1008                         TLan_MiiReadReg(dev, data->phy_id & 0x1f,
1009                                         data->reg_num & 0x1f, &data->val_out);
1010                         return 0;
1011
1012
1013         case SIOCSMIIREG:               /* Write MII PHY register. */
1014                         if (!capable(CAP_NET_ADMIN))
1015                                 return -EPERM;
1016                         TLan_MiiWriteReg(dev, data->phy_id & 0x1f,
1017                                          data->reg_num & 0x1f, data->val_in);
1018                         return 0;
1019                 default:
1020                         return -EOPNOTSUPP;
1021         }
1022 } /* tlan_ioctl */
1023
1024
1025         /***************************************************************
1026          *      TLan_tx_timeout
1027          *
1028          *      Returns: nothing
1029          *
1030          *      Params:
1031          *              dev     structure of device which timed out
1032          *                      during transmit.
1033          *
1034          **************************************************************/
1035
1036 static void TLan_tx_timeout(struct net_device *dev)
1037 {
1038
1039         TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Transmit timed out.\n", dev->name);
1040
1041         /* Ok so we timed out, lets see what we can do about it...*/
1042         TLan_FreeLists( dev );
1043         TLan_ResetLists( dev );
1044         TLan_ReadAndClearStats( dev, TLAN_IGNORE );
1045         TLan_ResetAdapter( dev );
1046         dev->trans_start = jiffies;
1047         netif_wake_queue( dev );
1048
1049 }
1050
1051
1052         /***************************************************************
1053          *      TLan_tx_timeout_work
1054          *
1055          *      Returns: nothing
1056          *
1057          *      Params:
1058          *              work    work item of device which timed out
1059          *
1060          **************************************************************/
1061
1062 static void TLan_tx_timeout_work(struct work_struct *work)
1063 {
1064         TLanPrivateInfo *priv =
1065                 container_of(work, TLanPrivateInfo, tlan_tqueue);
1066
1067         TLan_tx_timeout(priv->dev);
1068 }
1069
1070
1071
1072         /***************************************************************
1073          *      TLan_StartTx
1074          *
1075          *      Returns:
1076          *              0 on success, non-zero on failure.
1077          *      Parms:
1078          *              skb     A pointer to the sk_buff containing the
1079          *                      frame to be sent.
1080          *              dev     The device to send the data on.
1081          *
1082          *      This function adds a frame to the Tx list to be sent
1083          *      ASAP.  First it verifies that the adapter is ready and
1084          *      there is room in the queue.  Then it sets up the next
1085          *      available list, copies the frame to the corresponding
1086          *      buffer.  If the adapter Tx channel is idle, it gives
1087          *      the adapter a Tx Go command on the list, otherwise it
1088          *      sets the forward address of the previous list to point
1089          *      to this one.  Then it frees the sk_buff.
1090          *
1091          **************************************************************/
1092
1093 static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
1094 {
1095         TLanPrivateInfo *priv = netdev_priv(dev);
1096         TLanList        *tail_list;
1097         dma_addr_t      tail_list_phys;
1098         u8              *tail_buffer;
1099         unsigned long   flags;
1100
1101         if ( ! priv->phyOnline ) {
1102                 TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  %s PHY is not ready\n",
1103                           dev->name );
1104                 dev_kfree_skb_any(skb);
1105                 return 0;
1106         }
1107
1108         if (skb_padto(skb, TLAN_MIN_FRAME_SIZE))
1109                 return 0;
1110
1111         tail_list = priv->txList + priv->txTail;
1112         tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail;
1113
1114         if ( tail_list->cStat != TLAN_CSTAT_UNUSED ) {
1115                 TLAN_DBG( TLAN_DEBUG_TX,
1116                           "TRANSMIT:  %s is busy (Head=%d Tail=%d)\n",
1117                           dev->name, priv->txHead, priv->txTail );
1118                 netif_stop_queue(dev);
1119                 priv->txBusyCount++;
1120                 return 1;
1121         }
1122
1123         tail_list->forward = 0;
1124
1125         if ( bbuf ) {
1126                 tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE );
1127                 skb_copy_from_linear_data(skb, tail_buffer, skb->len);
1128         } else {
1129                 tail_list->buffer[0].address = pci_map_single(priv->pciDev,
1130                                                               skb->data, skb->len,
1131                                                               PCI_DMA_TODEVICE);
1132                 TLan_StoreSKB(tail_list, skb);
1133         }
1134
1135         tail_list->frameSize = (u16) skb->len;
1136         tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len;
1137         tail_list->buffer[1].count = 0;
1138         tail_list->buffer[1].address = 0;
1139
1140         spin_lock_irqsave(&priv->lock, flags);
1141         tail_list->cStat = TLAN_CSTAT_READY;
1142         if ( ! priv->txInProgress ) {
1143                 priv->txInProgress = 1;
1144                 TLAN_DBG( TLAN_DEBUG_TX,
1145                           "TRANSMIT:  Starting TX on buffer %d\n", priv->txTail );
1146                 outl( tail_list_phys, dev->base_addr + TLAN_CH_PARM );
1147                 outl( TLAN_HC_GO, dev->base_addr + TLAN_HOST_CMD );
1148         } else {
1149                 TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  Adding buffer %d to TX channel\n",
1150                           priv->txTail );
1151                 if ( priv->txTail == 0 ) {
1152                         ( priv->txList + ( TLAN_NUM_TX_LISTS - 1 ) )->forward
1153                                 = tail_list_phys;
1154                 } else {
1155                         ( priv->txList + ( priv->txTail - 1 ) )->forward
1156                                 = tail_list_phys;
1157                 }
1158         }
1159         spin_unlock_irqrestore(&priv->lock, flags);
1160
1161         CIRC_INC( priv->txTail, TLAN_NUM_TX_LISTS );
1162
1163         if ( bbuf )
1164                 dev_kfree_skb_any(skb);
1165
1166         dev->trans_start = jiffies;
1167         return 0;
1168
1169 } /* TLan_StartTx */
1170
1171
1172
1173
1174         /***************************************************************
1175          *      TLan_HandleInterrupt
1176          *
1177          *      Returns:
1178          *              Nothing
1179          *      Parms:
1180          *              irq     The line on which the interrupt
1181          *                      occurred.
1182          *              dev_id  A pointer to the device assigned to
1183          *                      this irq line.
1184          *
1185          *      This function handles an interrupt generated by its
1186          *      assigned TLAN adapter.  The function deactivates
1187          *      interrupts on its adapter, records the type of
1188          *      interrupt, executes the appropriate subhandler, and
1189          *      acknowdges the interrupt to the adapter (thus
1190          *      re-enabling adapter interrupts.
1191          *
1192          **************************************************************/
1193
1194 static irqreturn_t TLan_HandleInterrupt(int irq, void *dev_id)
1195 {
1196         struct net_device       *dev = dev_id;
1197         TLanPrivateInfo *priv = netdev_priv(dev);
1198         u16             host_int;
1199         u16             type;
1200
1201         spin_lock(&priv->lock);
1202
1203         host_int = inw( dev->base_addr + TLAN_HOST_INT );
1204         type = ( host_int & TLAN_HI_IT_MASK ) >> 2;
1205         if ( type ) {
1206                 u32     ack;
1207                 u32     host_cmd;
1208
1209                 outw( host_int, dev->base_addr + TLAN_HOST_INT );
1210                 ack = TLanIntVector[type]( dev, host_int );
1211
1212                 if ( ack ) {
1213                         host_cmd = TLAN_HC_ACK | ack | ( type << 18 );
1214                         outl( host_cmd, dev->base_addr + TLAN_HOST_CMD );
1215                 }
1216         }
1217
1218         spin_unlock(&priv->lock);
1219
1220         return IRQ_RETVAL(type);
1221 } /* TLan_HandleInterrupts */
1222
1223
1224
1225
1226         /***************************************************************
1227          *      TLan_Close
1228          *
1229          *      Returns:
1230          *              An error code.
1231          *      Parms:
1232          *              dev     The device structure of the device to
1233          *                      close.
1234          *
1235          *      This function shuts down the adapter.  It records any
1236          *      stats, puts the adapter into reset state, deactivates
1237          *      its time as needed, and frees the irq it is using.
1238          *
1239          **************************************************************/
1240
1241 static int TLan_Close(struct net_device *dev)
1242 {
1243         TLanPrivateInfo *priv = netdev_priv(dev);
1244
1245         netif_stop_queue(dev);
1246         priv->neg_be_verbose = 0;
1247
1248         TLan_ReadAndClearStats( dev, TLAN_RECORD );
1249         outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
1250         if ( priv->timer.function != NULL ) {
1251                 del_timer_sync( &priv->timer );
1252                 priv->timer.function = NULL;
1253         }
1254
1255         free_irq( dev->irq, dev );
1256         TLan_FreeLists( dev );
1257         TLAN_DBG( TLAN_DEBUG_GNRL, "Device %s closed.\n", dev->name );
1258
1259         return 0;
1260
1261 } /* TLan_Close */
1262
1263
1264
1265
1266         /***************************************************************
1267          *      TLan_GetStats
1268          *
1269          *      Returns:
1270          *              A pointer to the device's statistics structure.
1271          *      Parms:
1272          *              dev     The device structure to return the
1273          *                      stats for.
1274          *
1275          *      This function updates the devices statistics by reading
1276          *      the TLAN chip's onboard registers.  Then it returns the
1277          *      address of the statistics structure.
1278          *
1279          **************************************************************/
1280
1281 static struct net_device_stats *TLan_GetStats( struct net_device *dev )
1282 {
1283         TLanPrivateInfo *priv = netdev_priv(dev);
1284         int i;
1285
1286         /* Should only read stats if open ? */
1287         TLan_ReadAndClearStats( dev, TLAN_RECORD );
1288
1289         TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE:  %s EOC count = %d\n", dev->name,
1290                   priv->rxEocCount );
1291         TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  %s Busy count = %d\n", dev->name,
1292                   priv->txBusyCount );
1293         if ( debug & TLAN_DEBUG_GNRL ) {
1294                 TLan_PrintDio( dev->base_addr );
1295                 TLan_PhyPrint( dev );
1296         }
1297         if ( debug & TLAN_DEBUG_LIST ) {
1298                 for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ )
1299                         TLan_PrintList( priv->rxList + i, "RX", i );
1300                 for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ )
1301                         TLan_PrintList( priv->txList + i, "TX", i );
1302         }
1303
1304         return &dev->stats;
1305
1306 } /* TLan_GetStats */
1307
1308
1309
1310
1311         /***************************************************************
1312          *      TLan_SetMulticastList
1313          *
1314          *      Returns:
1315          *              Nothing
1316          *      Parms:
1317          *              dev     The device structure to set the
1318          *                      multicast list for.
1319          *
1320          *      This function sets the TLAN adaptor to various receive
1321          *      modes.  If the IFF_PROMISC flag is set, promiscuous
1322          *      mode is acitviated.  Otherwise, promiscuous mode is
1323          *      turned off.  If the IFF_ALLMULTI flag is set, then
1324          *      the hash table is set to receive all group addresses.
1325          *      Otherwise, the first three multicast addresses are
1326          *      stored in AREG_1-3, and the rest are selected via the
1327          *      hash table, as necessary.
1328          *
1329          **************************************************************/
1330
1331 static void TLan_SetMulticastList( struct net_device *dev )
1332 {
1333         struct dev_mc_list      *dmi = dev->mc_list;
1334         u32                     hash1 = 0;
1335         u32                     hash2 = 0;
1336         int                     i;
1337         u32                     offset;
1338         u8                      tmp;
1339
1340         if ( dev->flags & IFF_PROMISC ) {
1341                 tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
1342                 TLan_DioWrite8( dev->base_addr,
1343                                 TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF );
1344         } else {
1345                 tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
1346                 TLan_DioWrite8( dev->base_addr,
1347                                 TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF );
1348                 if ( dev->flags & IFF_ALLMULTI ) {
1349                         for ( i = 0; i < 3; i++ )
1350                                 TLan_SetMac( dev, i + 1, NULL );
1351                         TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, 0xFFFFFFFF );
1352                         TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, 0xFFFFFFFF );
1353                 } else {
1354                         for ( i = 0; i < dev->mc_count; i++ ) {
1355                                 if ( i < 3 ) {
1356                                         TLan_SetMac( dev, i + 1,
1357                                                      (char *) &dmi->dmi_addr );
1358                                 } else {
1359                                         offset = TLan_HashFunc( (u8 *) &dmi->dmi_addr );
1360                                         if ( offset < 32 )
1361                                                 hash1 |= ( 1 << offset );
1362                                         else
1363                                                 hash2 |= ( 1 << ( offset - 32 ) );
1364                                 }
1365                                 dmi = dmi->next;
1366                         }
1367                         for ( ; i < 3; i++ )
1368                                 TLan_SetMac( dev, i + 1, NULL );
1369                         TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, hash1 );
1370                         TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, hash2 );
1371                 }
1372         }
1373
1374 } /* TLan_SetMulticastList */
1375
1376
1377
1378 /*****************************************************************************
1379 ******************************************************************************
1380
1381         ThunderLAN Driver Interrupt Vectors and Table
1382
1383         Please see Chap. 4, "Interrupt Handling" of the "ThunderLAN
1384         Programmer's Guide" for more informations on handling interrupts
1385         generated by TLAN based adapters.
1386
1387 ******************************************************************************
1388 *****************************************************************************/
1389
1390
1391
1392
1393         /***************************************************************
1394          *      TLan_HandleTxEOF
1395          *
1396          *      Returns:
1397          *              1
1398          *      Parms:
1399          *              dev             Device assigned the IRQ that was
1400          *                              raised.
1401          *              host_int        The contents of the HOST_INT
1402          *                              port.
1403          *
1404          *      This function handles Tx EOF interrupts which are raised
1405          *      by the adapter when it has completed sending the
1406          *      contents of a buffer.  If detemines which list/buffer
1407          *      was completed and resets it.  If the buffer was the last
1408          *      in the channel (EOC), then the function checks to see if
1409          *      another buffer is ready to send, and if so, sends a Tx
1410          *      Go command.  Finally, the driver activates/continues the
1411          *      activity LED.
1412          *
1413          **************************************************************/
1414
1415 static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
1416 {
1417         TLanPrivateInfo *priv = netdev_priv(dev);
1418         int             eoc = 0;
1419         TLanList        *head_list;
1420         dma_addr_t      head_list_phys;
1421         u32             ack = 0;
1422         u16             tmpCStat;
1423
1424         TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  Handling TX EOF (Head=%d Tail=%d)\n",
1425                   priv->txHead, priv->txTail );
1426         head_list = priv->txList + priv->txHead;
1427
1428         while (((tmpCStat = head_list->cStat ) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) {
1429                 ack++;
1430                 if ( ! bbuf ) {
1431                         struct sk_buff *skb = TLan_GetSKB(head_list);
1432                         pci_unmap_single(priv->pciDev, head_list->buffer[0].address,
1433                                          skb->len, PCI_DMA_TODEVICE);
1434                         dev_kfree_skb_any(skb);
1435                         head_list->buffer[8].address = 0;
1436                         head_list->buffer[9].address = 0;
1437                 }
1438
1439                 if ( tmpCStat & TLAN_CSTAT_EOC )
1440                         eoc = 1;
1441
1442                 dev->stats.tx_bytes += head_list->frameSize;
1443
1444                 head_list->cStat = TLAN_CSTAT_UNUSED;
1445                 netif_start_queue(dev);
1446                 CIRC_INC( priv->txHead, TLAN_NUM_TX_LISTS );
1447                 head_list = priv->txList + priv->txHead;
1448         }
1449
1450         if (!ack)
1451                 printk(KERN_INFO "TLAN: Received interrupt for uncompleted TX frame.\n");
1452
1453         if ( eoc ) {
1454                 TLAN_DBG( TLAN_DEBUG_TX,
1455                           "TRANSMIT:  Handling TX EOC (Head=%d Tail=%d)\n",
1456                           priv->txHead, priv->txTail );
1457                 head_list = priv->txList + priv->txHead;
1458                 head_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txHead;
1459                 if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
1460                         outl(head_list_phys, dev->base_addr + TLAN_CH_PARM );
1461                         ack |= TLAN_HC_GO;
1462                 } else {
1463                         priv->txInProgress = 0;
1464                 }
1465         }
1466
1467         if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) {
1468                 TLan_DioWrite8( dev->base_addr,
1469                                 TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
1470                 if ( priv->timer.function == NULL ) {
1471                          priv->timer.function = &TLan_Timer;
1472                          priv->timer.data = (unsigned long) dev;
1473                          priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
1474                          priv->timerSetAt = jiffies;
1475                          priv->timerType = TLAN_TIMER_ACTIVITY;
1476                          add_timer(&priv->timer);
1477                 } else if ( priv->timerType == TLAN_TIMER_ACTIVITY ) {
1478                         priv->timerSetAt = jiffies;
1479                 }
1480         }
1481
1482         return ack;
1483
1484 } /* TLan_HandleTxEOF */
1485
1486
1487
1488
1489         /***************************************************************
1490          *      TLan_HandleStatOverflow
1491          *
1492          *      Returns:
1493          *              1
1494          *      Parms:
1495          *              dev             Device assigned the IRQ that was
1496          *                              raised.
1497          *              host_int        The contents of the HOST_INT
1498          *                              port.
1499          *
1500          *      This function handles the Statistics Overflow interrupt
1501          *      which means that one or more of the TLAN statistics
1502          *      registers has reached 1/2 capacity and needs to be read.
1503          *
1504          **************************************************************/
1505
1506 static u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int )
1507 {
1508         TLan_ReadAndClearStats( dev, TLAN_RECORD );
1509
1510         return 1;
1511
1512 } /* TLan_HandleStatOverflow */
1513
1514
1515
1516
1517         /***************************************************************
1518          *      TLan_HandleRxEOF
1519          *
1520          *      Returns:
1521          *              1
1522          *      Parms:
1523          *              dev             Device assigned the IRQ that was
1524          *                              raised.
1525          *              host_int        The contents of the HOST_INT
1526          *                              port.
1527          *
1528          *      This function handles the Rx EOF interrupt which
1529          *      indicates a frame has been received by the adapter from
1530          *      the net and the frame has been transferred to memory.
1531          *      The function determines the bounce buffer the frame has
1532          *      been loaded into, creates a new sk_buff big enough to
1533          *      hold the frame, and sends it to protocol stack.  It
1534          *      then resets the used buffer and appends it to the end
1535          *      of the list.  If the frame was the last in the Rx
1536          *      channel (EOC), the function restarts the receive channel
1537          *      by sending an Rx Go command to the adapter.  Then it
1538          *      activates/continues the activity LED.
1539          *
1540          **************************************************************/
1541
1542 static u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
1543 {
1544         TLanPrivateInfo *priv = netdev_priv(dev);
1545         u32             ack = 0;
1546         int             eoc = 0;
1547         u8              *head_buffer;
1548         TLanList        *head_list;
1549         struct sk_buff  *skb;
1550         TLanList        *tail_list;
1551         u16             tmpCStat;
1552         dma_addr_t      head_list_phys;
1553
1554         TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE:  Handling RX EOF (Head=%d Tail=%d)\n",
1555                   priv->rxHead, priv->rxTail );
1556         head_list = priv->rxList + priv->rxHead;
1557         head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
1558
1559         while (((tmpCStat = head_list->cStat) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) {
1560                 dma_addr_t frameDma = head_list->buffer[0].address;
1561                 u32 frameSize = head_list->frameSize;
1562                 ack++;
1563                 if (tmpCStat & TLAN_CSTAT_EOC)
1564                         eoc = 1;
1565
1566                 if (bbuf) {
1567                         skb = netdev_alloc_skb(dev, frameSize + 7);
1568                         if ( !skb )
1569                                 goto drop_and_reuse;
1570
1571                         head_buffer = priv->rxBuffer
1572                                 + (priv->rxHead * TLAN_MAX_FRAME_SIZE);
1573                         skb_reserve(skb, 2);
1574                         pci_dma_sync_single_for_cpu(priv->pciDev,
1575                                                     frameDma, frameSize,
1576                                                     PCI_DMA_FROMDEVICE);
1577                         skb_copy_from_linear_data(skb, head_buffer, frameSize);
1578                         skb_put(skb, frameSize);
1579                         dev->stats.rx_bytes += frameSize;
1580
1581                         skb->protocol = eth_type_trans( skb, dev );
1582                         netif_rx( skb );
1583                 } else {
1584                         struct sk_buff *new_skb;
1585
1586                         new_skb = netdev_alloc_skb(dev, TLAN_MAX_FRAME_SIZE + 7 );
1587                         if ( !new_skb )
1588                                 goto drop_and_reuse;
1589
1590                         skb = TLan_GetSKB(head_list);
1591                         pci_unmap_single(priv->pciDev, frameDma,
1592                                          TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
1593                         skb_put( skb, frameSize );
1594
1595                         dev->stats.rx_bytes += frameSize;
1596
1597                         skb->protocol = eth_type_trans( skb, dev );
1598                         netif_rx( skb );
1599
1600                         skb_reserve( new_skb, NET_IP_ALIGN );
1601                         head_list->buffer[0].address = pci_map_single(priv->pciDev,
1602                                                                       new_skb->data,
1603                                                                       TLAN_MAX_FRAME_SIZE,
1604                                                                       PCI_DMA_FROMDEVICE);
1605
1606                         TLan_StoreSKB(head_list, new_skb);
1607
1608                 }
1609 drop_and_reuse:
1610                 head_list->forward = 0;
1611                 head_list->cStat = 0;
1612                 tail_list = priv->rxList + priv->rxTail;
1613                 tail_list->forward = head_list_phys;
1614
1615                 CIRC_INC( priv->rxHead, TLAN_NUM_RX_LISTS );
1616                 CIRC_INC( priv->rxTail, TLAN_NUM_RX_LISTS );
1617                 head_list = priv->rxList + priv->rxHead;
1618                 head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
1619         }
1620
1621         if (!ack)
1622                 printk(KERN_INFO "TLAN: Received interrupt for uncompleted RX frame.\n");
1623
1624
1625         if ( eoc ) {
1626                 TLAN_DBG( TLAN_DEBUG_RX,
1627                           "RECEIVE:  Handling RX EOC (Head=%d Tail=%d)\n",
1628                           priv->rxHead, priv->rxTail );
1629                 head_list = priv->rxList + priv->rxHead;
1630                 head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
1631                 outl(head_list_phys, dev->base_addr + TLAN_CH_PARM );
1632                 ack |= TLAN_HC_GO | TLAN_HC_RT;
1633                 priv->rxEocCount++;
1634         }
1635
1636         if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) {
1637                 TLan_DioWrite8( dev->base_addr,
1638                                 TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
1639                 if ( priv->timer.function == NULL )  {
1640                         priv->timer.function = &TLan_Timer;
1641                         priv->timer.data = (unsigned long) dev;
1642                         priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
1643                         priv->timerSetAt = jiffies;
1644                         priv->timerType = TLAN_TIMER_ACTIVITY;
1645                         add_timer(&priv->timer);
1646                 } else if ( priv->timerType == TLAN_TIMER_ACTIVITY ) {
1647                         priv->timerSetAt = jiffies;
1648                 }
1649         }
1650
1651         dev->last_rx = jiffies;
1652
1653         return ack;
1654
1655 } /* TLan_HandleRxEOF */
1656
1657
1658
1659
1660         /***************************************************************
1661          *      TLan_HandleDummy
1662          *
1663          *      Returns:
1664          *              1
1665          *      Parms:
1666          *              dev             Device assigned the IRQ that was
1667          *                              raised.
1668          *              host_int        The contents of the HOST_INT
1669          *                              port.
1670          *
1671          *      This function handles the Dummy interrupt, which is
1672          *      raised whenever a test interrupt is generated by setting
1673          *      the Req_Int bit of HOST_CMD to 1.
1674          *
1675          **************************************************************/
1676
1677 static u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
1678 {
1679         printk( "TLAN:  Test interrupt on %s.\n", dev->name );
1680         return 1;
1681
1682 } /* TLan_HandleDummy */
1683
1684
1685
1686
1687         /***************************************************************
1688          *      TLan_HandleTxEOC
1689          *
1690          *      Returns:
1691          *              1
1692          *      Parms:
1693          *              dev             Device assigned the IRQ that was
1694          *                              raised.
1695          *              host_int        The contents of the HOST_INT
1696          *                              port.
1697          *
1698          *      This driver is structured to determine EOC occurrences by
1699          *      reading the CSTAT member of the list structure.  Tx EOC
1700          *      interrupts are disabled via the DIO INTDIS register.
1701          *      However, TLAN chips before revision 3.0 didn't have this
1702          *      functionality, so process EOC events if this is the
1703          *      case.
1704          *
1705          **************************************************************/
1706
1707 static u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int )
1708 {
1709         TLanPrivateInfo *priv = netdev_priv(dev);
1710         TLanList                *head_list;
1711         dma_addr_t              head_list_phys;
1712         u32                     ack = 1;
1713
1714         host_int = 0;
1715         if ( priv->tlanRev < 0x30 ) {
1716                 TLAN_DBG( TLAN_DEBUG_TX,
1717                           "TRANSMIT:  Handling TX EOC (Head=%d Tail=%d) -- IRQ\n",
1718                           priv->txHead, priv->txTail );
1719                 head_list = priv->txList + priv->txHead;
1720                 head_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txHead;
1721                 if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
1722                         netif_stop_queue(dev);
1723                         outl( head_list_phys, dev->base_addr + TLAN_CH_PARM );
1724                         ack |= TLAN_HC_GO;
1725                 } else {
1726                         priv->txInProgress = 0;
1727                 }
1728         }
1729
1730         return ack;
1731
1732 } /* TLan_HandleTxEOC */
1733
1734
1735
1736
1737         /***************************************************************
1738          *      TLan_HandleStatusCheck
1739          *
1740          *      Returns:
1741          *              0 if Adapter check, 1 if Network Status check.
1742          *      Parms:
1743          *              dev             Device assigned the IRQ that was
1744          *                              raised.
1745          *              host_int        The contents of the HOST_INT
1746          *                              port.
1747          *
1748          *      This function handles Adapter Check/Network Status
1749          *      interrupts generated by the adapter.  It checks the
1750          *      vector in the HOST_INT register to determine if it is
1751          *      an Adapter Check interrupt.  If so, it resets the
1752          *      adapter.  Otherwise it clears the status registers
1753          *      and services the PHY.
1754          *
1755          **************************************************************/
1756
1757 static u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
1758 {
1759         TLanPrivateInfo *priv = netdev_priv(dev);
1760         u32             ack;
1761         u32             error;
1762         u8              net_sts;
1763         u32             phy;
1764         u16             tlphy_ctl;
1765         u16             tlphy_sts;
1766
1767         ack = 1;
1768         if ( host_int & TLAN_HI_IV_MASK ) {
1769                 netif_stop_queue( dev );
1770                 error = inl( dev->base_addr + TLAN_CH_PARM );
1771                 printk( "TLAN:  %s: Adaptor Error = 0x%x\n", dev->name, error );
1772                 TLan_ReadAndClearStats( dev, TLAN_RECORD );
1773                 outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
1774
1775                 schedule_work(&priv->tlan_tqueue);
1776
1777                 netif_wake_queue(dev);
1778                 ack = 0;
1779         } else {
1780                 TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Status Check\n", dev->name );
1781                 phy = priv->phy[priv->phyNum];
1782
1783                 net_sts = TLan_DioRead8( dev->base_addr, TLAN_NET_STS );
1784                 if ( net_sts ) {
1785                         TLan_DioWrite8( dev->base_addr, TLAN_NET_STS, net_sts );
1786                         TLAN_DBG( TLAN_DEBUG_GNRL, "%s:    Net_Sts = %x\n",
1787                                   dev->name, (unsigned) net_sts );
1788                 }
1789                 if ( ( net_sts & TLAN_NET_STS_MIRQ ) &&  ( priv->phyNum == 0 ) ) {
1790                         TLan_MiiReadReg( dev, phy, TLAN_TLPHY_STS, &tlphy_sts );
1791                         TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl );
1792                         if ( ! ( tlphy_sts & TLAN_TS_POLOK ) &&
1793                              ! ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
1794                                 tlphy_ctl |= TLAN_TC_SWAPOL;
1795                                 TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
1796                         } else if ( ( tlphy_sts & TLAN_TS_POLOK )
1797                                     && ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
1798                                 tlphy_ctl &= ~TLAN_TC_SWAPOL;
1799                                 TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
1800                         }
1801
1802                         if (debug) {
1803                                 TLan_PhyPrint( dev );
1804                         }
1805                 }
1806         }
1807
1808         return ack;
1809
1810 } /* TLan_HandleStatusCheck */
1811
1812
1813
1814
1815         /***************************************************************
1816          *      TLan_HandleRxEOC
1817          *
1818          *      Returns:
1819          *              1
1820          *      Parms:
1821          *              dev             Device assigned the IRQ that was
1822          *                              raised.
1823          *              host_int        The contents of the HOST_INT
1824          *                              port.
1825          *
1826          *      This driver is structured to determine EOC occurrences by
1827          *      reading the CSTAT member of the list structure.  Rx EOC
1828          *      interrupts are disabled via the DIO INTDIS register.
1829          *      However, TLAN chips before revision 3.0 didn't have this
1830          *      CSTAT member or a INTDIS register, so if this chip is
1831          *      pre-3.0, process EOC interrupts normally.
1832          *
1833          **************************************************************/
1834
1835 static u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int )
1836 {
1837         TLanPrivateInfo *priv = netdev_priv(dev);
1838         dma_addr_t      head_list_phys;
1839         u32             ack = 1;
1840
1841         if (  priv->tlanRev < 0x30 ) {
1842                 TLAN_DBG( TLAN_DEBUG_RX,
1843                           "RECEIVE:  Handling RX EOC (Head=%d Tail=%d) -- IRQ\n",
1844                           priv->rxHead, priv->rxTail );
1845                 head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
1846                 outl( head_list_phys, dev->base_addr + TLAN_CH_PARM );
1847                 ack |= TLAN_HC_GO | TLAN_HC_RT;
1848                 priv->rxEocCount++;
1849         }
1850
1851         return ack;
1852
1853 } /* TLan_HandleRxEOC */
1854
1855
1856
1857
1858 /*****************************************************************************
1859 ******************************************************************************
1860
1861         ThunderLAN Driver Timer Function
1862
1863 ******************************************************************************
1864 *****************************************************************************/
1865
1866
1867         /***************************************************************
1868          *      TLan_Timer
1869          *
1870          *      Returns:
1871          *              Nothing
1872          *      Parms:
1873          *              data    A value given to add timer when
1874          *                      add_timer was called.
1875          *
1876          *      This function handles timed functionality for the
1877          *      TLAN driver.  The two current timer uses are for
1878          *      delaying for autonegotionation and driving the ACT LED.
1879          *      -       Autonegotiation requires being allowed about
1880          *              2 1/2 seconds before attempting to transmit a
1881          *              packet.  It would be a very bad thing to hang
1882          *              the kernel this long, so the driver doesn't
1883          *              allow transmission 'til after this time, for
1884          *              certain PHYs.  It would be much nicer if all
1885          *              PHYs were interrupt-capable like the internal
1886          *              PHY.
1887          *      -       The ACT LED, which shows adapter activity, is
1888          *              driven by the driver, and so must be left on
1889          *              for a short period to power up the LED so it
1890          *              can be seen.  This delay can be changed by
1891          *              changing the TLAN_TIMER_ACT_DELAY in tlan.h,
1892          *              if desired.  100 ms  produces a slightly
1893          *              sluggish response.
1894          *
1895          **************************************************************/
1896
1897 static void TLan_Timer( unsigned long data )
1898 {
1899         struct net_device       *dev = (struct net_device *) data;
1900         TLanPrivateInfo *priv = netdev_priv(dev);
1901         u32             elapsed;
1902         unsigned long   flags = 0;
1903
1904         priv->timer.function = NULL;
1905
1906         switch ( priv->timerType ) {
1907 #ifdef MONITOR
1908                 case TLAN_TIMER_LINK_BEAT:
1909                         TLan_PhyMonitor( dev );
1910                         break;
1911 #endif
1912                 case TLAN_TIMER_PHY_PDOWN:
1913                         TLan_PhyPowerDown( dev );
1914                         break;
1915                 case TLAN_TIMER_PHY_PUP:
1916                         TLan_PhyPowerUp( dev );
1917                         break;
1918                 case TLAN_TIMER_PHY_RESET:
1919                         TLan_PhyReset( dev );
1920                         break;
1921                 case TLAN_TIMER_PHY_START_LINK:
1922                         TLan_PhyStartLink( dev );
1923                         break;
1924                 case TLAN_TIMER_PHY_FINISH_AN:
1925                         TLan_PhyFinishAutoNeg( dev );
1926                         break;
1927                 case TLAN_TIMER_FINISH_RESET:
1928                         TLan_FinishReset( dev );
1929                         break;
1930                 case TLAN_TIMER_ACTIVITY:
1931                         spin_lock_irqsave(&priv->lock, flags);
1932                         if ( priv->timer.function == NULL ) {
1933                                 elapsed = jiffies - priv->timerSetAt;
1934                                 if ( elapsed >= TLAN_TIMER_ACT_DELAY ) {
1935                                         TLan_DioWrite8( dev->base_addr,
1936                                                         TLAN_LED_REG, TLAN_LED_LINK );
1937                                 } else  {
1938                                         priv->timer.function = &TLan_Timer;
1939                                         priv->timer.expires = priv->timerSetAt
1940                                                 + TLAN_TIMER_ACT_DELAY;
1941                                         spin_unlock_irqrestore(&priv->lock, flags);
1942                                         add_timer( &priv->timer );
1943                                         break;
1944                                 }
1945                         }
1946                         spin_unlock_irqrestore(&priv->lock, flags);
1947                         break;
1948                 default:
1949                         break;
1950         }
1951
1952 } /* TLan_Timer */
1953
1954
1955
1956
1957 /*****************************************************************************
1958 ******************************************************************************
1959
1960         ThunderLAN Driver Adapter Related Routines
1961
1962 ******************************************************************************
1963 *****************************************************************************/
1964
1965
1966         /***************************************************************
1967          *      TLan_ResetLists
1968          *
1969          *      Returns:
1970          *              Nothing
1971          *      Parms:
1972          *              dev     The device structure with the list
1973          *                      stuctures to be reset.
1974          *
1975          *      This routine sets the variables associated with managing
1976          *      the TLAN lists to their initial values.
1977          *
1978          **************************************************************/
1979
1980 static void TLan_ResetLists( struct net_device *dev )
1981 {
1982         TLanPrivateInfo *priv = netdev_priv(dev);
1983         int             i;
1984         TLanList        *list;
1985         dma_addr_t      list_phys;
1986         struct sk_buff  *skb;
1987
1988         priv->txHead = 0;
1989         priv->txTail = 0;
1990         for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) {
1991                 list = priv->txList + i;
1992                 list->cStat = TLAN_CSTAT_UNUSED;
1993                 if ( bbuf ) {
1994                         list->buffer[0].address = priv->txBufferDMA
1995                                 + ( i * TLAN_MAX_FRAME_SIZE );
1996                 } else {
1997                         list->buffer[0].address = 0;
1998                 }
1999                 list->buffer[2].count = 0;
2000                 list->buffer[2].address = 0;
2001                 list->buffer[8].address = 0;
2002                 list->buffer[9].address = 0;
2003         }
2004
2005         priv->rxHead = 0;
2006         priv->rxTail = TLAN_NUM_RX_LISTS - 1;
2007         for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) {
2008                 list = priv->rxList + i;
2009                 list_phys = priv->rxListDMA + sizeof(TLanList) * i;
2010                 list->cStat = TLAN_CSTAT_READY;
2011                 list->frameSize = TLAN_MAX_FRAME_SIZE;
2012                 list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
2013                 if ( bbuf ) {
2014                         list->buffer[0].address = priv->rxBufferDMA
2015                                 + ( i * TLAN_MAX_FRAME_SIZE );
2016                 } else {
2017                         skb = netdev_alloc_skb(dev, TLAN_MAX_FRAME_SIZE + 7 );
2018                         if ( !skb ) {
2019                                 pr_err("TLAN: out of memory for received data.\n" );
2020                                 break;
2021                         }
2022
2023                         skb_reserve( skb, NET_IP_ALIGN );
2024                         list->buffer[0].address = pci_map_single(priv->pciDev,
2025                                                                  skb->data,
2026                                                                  TLAN_MAX_FRAME_SIZE,
2027                                                                  PCI_DMA_FROMDEVICE);
2028                         TLan_StoreSKB(list, skb);
2029                 }
2030                 list->buffer[1].count = 0;
2031                 list->buffer[1].address = 0;
2032                 list->forward = list_phys + sizeof(TLanList);
2033         }
2034
2035         /* in case ran out of memory early, clear bits */
2036         while (i < TLAN_NUM_RX_LISTS) {
2037                 TLan_StoreSKB(priv->rxList + i, NULL);
2038                 ++i;
2039         }
2040         list->forward = 0;
2041
2042 } /* TLan_ResetLists */
2043
2044
2045 static void TLan_FreeLists( struct net_device *dev )
2046 {
2047         TLanPrivateInfo *priv = netdev_priv(dev);
2048         int             i;
2049         TLanList        *list;
2050         struct sk_buff  *skb;
2051
2052         if ( ! bbuf ) {
2053                 for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) {
2054                         list = priv->txList + i;
2055                         skb = TLan_GetSKB(list);
2056                         if ( skb ) {
2057                                 pci_unmap_single(priv->pciDev,
2058                                                  list->buffer[0].address, skb->len,
2059                                                  PCI_DMA_TODEVICE);
2060                                 dev_kfree_skb_any( skb );
2061                                 list->buffer[8].address = 0;
2062                                 list->buffer[9].address = 0;
2063                         }
2064                 }
2065
2066                 for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) {
2067                         list = priv->rxList + i;
2068                         skb = TLan_GetSKB(list);
2069                         if ( skb ) {
2070                                 pci_unmap_single(priv->pciDev,
2071                                                  list->buffer[0].address,
2072                                                  TLAN_MAX_FRAME_SIZE,
2073                                                  PCI_DMA_FROMDEVICE);
2074                                 dev_kfree_skb_any( skb );
2075                                 list->buffer[8].address = 0;
2076                                 list->buffer[9].address = 0;
2077                         }
2078                 }
2079         }
2080 } /* TLan_FreeLists */
2081
2082
2083
2084
2085         /***************************************************************
2086          *      TLan_PrintDio
2087          *
2088          *      Returns:
2089          *              Nothing
2090          *      Parms:
2091          *              io_base         Base IO port of the device of
2092          *                              which to print DIO registers.
2093          *
2094          *      This function prints out all the internal (DIO)
2095          *      registers of a TLAN chip.
2096          *
2097          **************************************************************/
2098
2099 static void TLan_PrintDio( u16 io_base )
2100 {
2101         u32 data0, data1;
2102         int     i;
2103
2104         printk( "TLAN:   Contents of internal registers for io base 0x%04hx.\n",
2105                 io_base );
2106         printk( "TLAN:      Off.  +0         +4\n" );
2107         for ( i = 0; i < 0x4C; i+= 8 ) {
2108                 data0 = TLan_DioRead32( io_base, i );
2109                 data1 = TLan_DioRead32( io_base, i + 0x4 );
2110                 printk( "TLAN:      0x%02x  0x%08x 0x%08x\n", i, data0, data1 );
2111         }
2112
2113 } /* TLan_PrintDio */
2114
2115
2116
2117
2118         /***************************************************************
2119          *      TLan_PrintList
2120          *
2121          *      Returns:
2122          *              Nothing
2123          *      Parms:
2124          *              list    A pointer to the TLanList structure to
2125          *                      be printed.
2126          *              type    A string to designate type of list,
2127          *                      "Rx" or "Tx".
2128          *              num     The index of the list.
2129          *
2130          *      This function prints out the contents of the list
2131          *      pointed to by the list parameter.
2132          *
2133          **************************************************************/
2134
2135 static void TLan_PrintList( TLanList *list, char *type, int num)
2136 {
2137         int i;
2138
2139         printk( "TLAN:   %s List %d at %p\n", type, num, list );
2140         printk( "TLAN:      Forward    = 0x%08x\n",  list->forward );
2141         printk( "TLAN:      CSTAT      = 0x%04hx\n", list->cStat );
2142         printk( "TLAN:      Frame Size = 0x%04hx\n", list->frameSize );
2143         /* for ( i = 0; i < 10; i++ ) { */
2144         for ( i = 0; i < 2; i++ ) {
2145                 printk( "TLAN:      Buffer[%d].count, addr = 0x%08x, 0x%08x\n",
2146                         i, list->buffer[i].count, list->buffer[i].address );
2147         }
2148
2149 } /* TLan_PrintList */
2150
2151
2152
2153
2154         /***************************************************************
2155          *      TLan_ReadAndClearStats
2156          *
2157          *      Returns:
2158          *              Nothing
2159          *      Parms:
2160          *              dev     Pointer to device structure of adapter
2161          *                      to which to read stats.
2162          *              record  Flag indicating whether to add
2163          *
2164          *      This functions reads all the internal status registers
2165          *      of the TLAN chip, which clears them as a side effect.
2166          *      It then either adds the values to the device's status
2167          *      struct, or discards them, depending on whether record
2168          *      is TLAN_RECORD (!=0)  or TLAN_IGNORE (==0).
2169          *
2170          **************************************************************/
2171
2172 static void TLan_ReadAndClearStats( struct net_device *dev, int record )
2173 {
2174         u32             tx_good, tx_under;
2175         u32             rx_good, rx_over;
2176         u32             def_tx, crc, code;
2177         u32             multi_col, single_col;
2178         u32             excess_col, late_col, loss;
2179
2180         outw( TLAN_GOOD_TX_FRMS, dev->base_addr + TLAN_DIO_ADR );
2181         tx_good  = inb( dev->base_addr + TLAN_DIO_DATA );
2182         tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
2183         tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
2184         tx_under = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
2185
2186         outw( TLAN_GOOD_RX_FRMS, dev->base_addr + TLAN_DIO_ADR );
2187         rx_good  = inb( dev->base_addr + TLAN_DIO_DATA );
2188         rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
2189         rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
2190         rx_over  = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
2191
2192         outw( TLAN_DEFERRED_TX, dev->base_addr + TLAN_DIO_ADR );
2193         def_tx  = inb( dev->base_addr + TLAN_DIO_DATA );
2194         def_tx += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
2195         crc     = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
2196         code    = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
2197
2198         outw( TLAN_MULTICOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
2199         multi_col   = inb( dev->base_addr + TLAN_DIO_DATA );
2200         multi_col  += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
2201         single_col  = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
2202         single_col += inb( dev->base_addr + TLAN_DIO_DATA + 3 ) << 8;
2203
2204         outw( TLAN_EXCESSCOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
2205         excess_col = inb( dev->base_addr + TLAN_DIO_DATA );
2206         late_col   = inb( dev->base_addr + TLAN_DIO_DATA + 1 );
2207         loss       = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
2208
2209         if ( record ) {
2210                 dev->stats.rx_packets += rx_good;
2211                 dev->stats.rx_errors  += rx_over + crc + code;
2212                 dev->stats.tx_packets += tx_good;
2213                 dev->stats.tx_errors  += tx_under + loss;
2214                 dev->stats.collisions += multi_col + single_col + excess_col + late_col;
2215
2216                 dev->stats.rx_over_errors    += rx_over;
2217                 dev->stats.rx_crc_errors     += crc;
2218                 dev->stats.rx_frame_errors   += code;
2219
2220                 dev->stats.tx_aborted_errors += tx_under;
2221                 dev->stats.tx_carrier_errors += loss;
2222         }
2223
2224 } /* TLan_ReadAndClearStats */
2225
2226
2227
2228
2229         /***************************************************************
2230          *      TLan_Reset
2231          *
2232          *      Returns:
2233          *              0
2234          *      Parms:
2235          *              dev     Pointer to device structure of adapter
2236          *                      to be reset.
2237          *
2238          *      This function resets the adapter and it's physical
2239          *      device.  See Chap. 3, pp. 9-10 of the "ThunderLAN
2240          *      Programmer's Guide" for details.  The routine tries to
2241          *      implement what is detailed there, though adjustments
2242          *      have been made.
2243          *
2244          **************************************************************/
2245
2246 static void
2247 TLan_ResetAdapter( struct net_device *dev )
2248 {
2249         TLanPrivateInfo *priv = netdev_priv(dev);
2250         int             i;
2251         u32             addr;
2252         u32             data;
2253         u8              data8;
2254
2255         priv->tlanFullDuplex = FALSE;
2256         priv->phyOnline=0;
2257         netif_carrier_off(dev);
2258
2259 /*  1.  Assert reset bit. */
2260
2261         data = inl(dev->base_addr + TLAN_HOST_CMD);
2262         data |= TLAN_HC_AD_RST;
2263         outl(data, dev->base_addr + TLAN_HOST_CMD);
2264
2265         udelay(1000);
2266
2267 /*  2.  Turn off interrupts. ( Probably isn't necessary ) */
2268
2269         data = inl(dev->base_addr + TLAN_HOST_CMD);
2270         data |= TLAN_HC_INT_OFF;
2271         outl(data, dev->base_addr + TLAN_HOST_CMD);
2272
2273 /*  3.  Clear AREGs and HASHs. */
2274
2275         for ( i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4 ) {
2276                 TLan_DioWrite32( dev->base_addr, (u16) i, 0 );
2277         }
2278
2279 /*  4.  Setup NetConfig register. */
2280
2281         data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
2282         TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data );
2283
2284 /*  5.  Load Ld_Tmr and Ld_Thr in HOST_CMD. */
2285
2286         outl( TLAN_HC_LD_TMR | 0x3f, dev->base_addr + TLAN_HOST_CMD );
2287         outl( TLAN_HC_LD_THR | 0x9, dev->base_addr + TLAN_HOST_CMD );
2288
2289 /*  6.  Unreset the MII by setting NMRST (in NetSio) to 1. */
2290
2291         outw( TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR );
2292         addr = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
2293         TLan_SetBit( TLAN_NET_SIO_NMRST, addr );
2294
2295 /*  7.  Setup the remaining registers. */
2296
2297         if ( priv->tlanRev >= 0x30 ) {
2298                 data8 = TLAN_ID_TX_EOC | TLAN_ID_RX_EOC;
2299                 TLan_DioWrite8( dev->base_addr, TLAN_INT_DIS, data8 );
2300         }
2301         TLan_PhyDetect( dev );
2302         data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN;
2303
2304         if ( priv->adapter->flags & TLAN_ADAPTER_BIT_RATE_PHY ) {
2305                 data |= TLAN_NET_CFG_BIT;
2306                 if ( priv->aui == 1 ) {
2307                         TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x0a );
2308                 } else if ( priv->duplex == TLAN_DUPLEX_FULL ) {
2309                         TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x00 );
2310                         priv->tlanFullDuplex = TRUE;
2311                 } else {
2312                         TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x08 );
2313                 }
2314         }
2315
2316         if ( priv->phyNum == 0 ) {
2317                 data |= TLAN_NET_CFG_PHY_EN;
2318         }
2319         TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data );
2320
2321         if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
2322                 TLan_FinishReset( dev );
2323         } else {
2324                 TLan_PhyPowerDown( dev );
2325         }
2326
2327 } /* TLan_ResetAdapter */
2328
2329
2330
2331
2332 static void
2333 TLan_FinishReset( struct net_device *dev )
2334 {
2335         TLanPrivateInfo *priv = netdev_priv(dev);
2336         u8              data;
2337         u32             phy;
2338         u8              sio;
2339         u16             status;
2340         u16             partner;
2341         u16             tlphy_ctl;
2342         u16             tlphy_par;
2343         u16             tlphy_id1, tlphy_id2;
2344         int             i;
2345
2346         phy = priv->phy[priv->phyNum];
2347
2348         data = TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP;
2349         if ( priv->tlanFullDuplex ) {
2350                 data |= TLAN_NET_CMD_DUPLEX;
2351         }
2352         TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, data );
2353         data = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5;
2354         if ( priv->phyNum == 0 ) {
2355                 data |= TLAN_NET_MASK_MASK7;
2356         }
2357         TLan_DioWrite8( dev->base_addr, TLAN_NET_MASK, data );
2358         TLan_DioWrite16( dev->base_addr, TLAN_MAX_RX, ((1536)+7)&~7 );
2359         TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &tlphy_id1 );
2360         TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &tlphy_id2 );
2361
2362         if ( ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) ||
2363              ( priv->aui ) ) {
2364                 status = MII_GS_LINK;
2365                 printk( "TLAN:  %s: Link forced.\n", dev->name );
2366         } else {
2367                 TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
2368                 udelay( 1000 );
2369                 TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
2370                 if ( (status & MII_GS_LINK) &&
2371                      /* We only support link info on Nat.Sem. PHY's */
2372                         (tlphy_id1 == NAT_SEM_ID1) &&
2373                         (tlphy_id2 == NAT_SEM_ID2) ) {
2374                         TLan_MiiReadReg( dev, phy, MII_AN_LPA, &partner );
2375                         TLan_MiiReadReg( dev, phy, TLAN_TLPHY_PAR, &tlphy_par );
2376
2377                         printk( "TLAN: %s: Link active with ", dev->name );
2378                         if (!(tlphy_par & TLAN_PHY_AN_EN_STAT)) {
2379                                  printk( "forced 10%sMbps %s-Duplex\n",
2380                                          tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
2381                                          tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
2382                         } else {
2383                                 printk( "AutoNegotiation enabled, at 10%sMbps %s-Duplex\n",
2384                                         tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
2385                                         tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
2386                                 printk("TLAN: Partner capability: ");
2387                                         for (i = 5; i <= 10; i++)
2388                                                 if (partner & (1<<i))
2389                                                         printk("%s",media[i-5]);
2390                                 printk("\n");
2391                         }
2392
2393                         TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
2394 #ifdef MONITOR
2395                         /* We have link beat..for now anyway */
2396                         priv->link = 1;
2397                         /*Enabling link beat monitoring */
2398                         TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_LINK_BEAT );
2399 #endif
2400                 } else if (status & MII_GS_LINK)  {
2401                         printk( "TLAN: %s: Link active\n", dev->name );
2402                         TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
2403                 }
2404         }
2405
2406         if ( priv->phyNum == 0 ) {
2407                 TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl );
2408                 tlphy_ctl |= TLAN_TC_INTEN;
2409                 TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl );
2410                 sio = TLan_DioRead8( dev->base_addr, TLAN_NET_SIO );
2411                 sio |= TLAN_NET_SIO_MINTEN;
2412                 TLan_DioWrite8( dev->base_addr, TLAN_NET_SIO, sio );
2413         }
2414
2415         if ( status & MII_GS_LINK ) {
2416                 TLan_SetMac( dev, 0, dev->dev_addr );
2417                 priv->phyOnline = 1;
2418                 outb( ( TLAN_HC_INT_ON >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
2419                 if ( debug >= 1 && debug != TLAN_DEBUG_PROBE ) {
2420                         outb( ( TLAN_HC_REQ_INT >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
2421                 }
2422                 outl( priv->rxListDMA, dev->base_addr + TLAN_CH_PARM );
2423                 outl( TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD );
2424                 netif_carrier_on(dev);
2425         } else {
2426                 printk( "TLAN: %s: Link inactive, will retry in 10 secs...\n",
2427                         dev->name );
2428                 TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_FINISH_RESET );
2429                 return;
2430         }
2431         TLan_SetMulticastList(dev);
2432
2433 } /* TLan_FinishReset */
2434
2435
2436
2437
2438         /***************************************************************
2439          *      TLan_SetMac
2440          *
2441          *      Returns:
2442          *              Nothing
2443          *      Parms:
2444          *              dev     Pointer to device structure of adapter
2445          *                      on which to change the AREG.
2446          *              areg    The AREG to set the address in (0 - 3).
2447          *              mac     A pointer to an array of chars.  Each
2448          *                      element stores one byte of the address.
2449          *                      IE, it isn't in ascii.
2450          *
2451          *      This function transfers a MAC address to one of the
2452          *      TLAN AREGs (address registers).  The TLAN chip locks
2453          *      the register on writing to offset 0 and unlocks the
2454          *      register after writing to offset 5.  If NULL is passed
2455          *      in mac, then the AREG is filled with 0's.
2456          *
2457          **************************************************************/
2458
2459 static void TLan_SetMac( struct net_device *dev, int areg, char *mac )
2460 {
2461         int i;
2462
2463         areg *= 6;
2464
2465         if ( mac != NULL ) {
2466                 for ( i = 0; i < 6; i++ )
2467                         TLan_DioWrite8( dev->base_addr,
2468                                         TLAN_AREG_0 + areg + i, mac[i] );
2469         } else {
2470                 for ( i = 0; i < 6; i++ )
2471                         TLan_DioWrite8( dev->base_addr,
2472                                         TLAN_AREG_0 + areg + i, 0 );
2473         }
2474
2475 } /* TLan_SetMac */
2476
2477
2478
2479
2480 /*****************************************************************************
2481 ******************************************************************************
2482
2483         ThunderLAN Driver PHY Layer Routines
2484
2485 ******************************************************************************
2486 *****************************************************************************/
2487
2488
2489
2490         /*********************************************************************
2491          *      TLan_PhyPrint
2492          *
2493          *      Returns:
2494          *              Nothing
2495          *      Parms:
2496          *              dev     A pointer to the device structure of the
2497          *                      TLAN device having the PHYs to be detailed.
2498          *
2499          *      This function prints the registers a PHY (aka transceiver).
2500          *
2501          ********************************************************************/
2502
2503 static void TLan_PhyPrint( struct net_device *dev )
2504 {
2505         TLanPrivateInfo *priv = netdev_priv(dev);
2506         u16 i, data0, data1, data2, data3, phy;
2507
2508         phy = priv->phy[priv->phyNum];
2509
2510         if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
2511                 printk( "TLAN:   Device %s, Unmanaged PHY.\n", dev->name );
2512         } else if ( phy <= TLAN_PHY_MAX_ADDR ) {
2513                 printk( "TLAN:   Device %s, PHY 0x%02x.\n", dev->name, phy );
2514                 printk( "TLAN:      Off.  +0     +1     +2     +3 \n" );
2515                 for ( i = 0; i < 0x20; i+= 4 ) {
2516                         printk( "TLAN:      0x%02x", i );
2517                         TLan_MiiReadReg( dev, phy, i, &data0 );
2518                         printk( " 0x%04hx", data0 );
2519                         TLan_MiiReadReg( dev, phy, i + 1, &data1 );
2520                         printk( " 0x%04hx", data1 );
2521                         TLan_MiiReadReg( dev, phy, i + 2, &data2 );
2522                         printk( " 0x%04hx", data2 );
2523                         TLan_MiiReadReg( dev, phy, i + 3, &data3 );
2524                         printk( " 0x%04hx\n", data3 );
2525                 }
2526         } else {
2527                 printk( "TLAN:   Device %s, Invalid PHY.\n", dev->name );
2528         }
2529
2530 } /* TLan_PhyPrint */
2531
2532
2533
2534
2535         /*********************************************************************
2536          *      TLan_PhyDetect
2537          *
2538          *      Returns:
2539          *              Nothing
2540          *      Parms:
2541          *              dev     A pointer to the device structure of the adapter
2542          *                      for which the PHY needs determined.
2543          *
2544          *      So far I've found that adapters which have external PHYs
2545          *      may also use the internal PHY for part of the functionality.
2546          *      (eg, AUI/Thinnet).  This function finds out if this TLAN
2547          *      chip has an internal PHY, and then finds the first external
2548          *      PHY (starting from address 0) if it exists).
2549          *
2550          ********************************************************************/
2551
2552 static void TLan_PhyDetect( struct net_device *dev )
2553 {
2554         TLanPrivateInfo *priv = netdev_priv(dev);
2555         u16             control;
2556         u16             hi;
2557         u16             lo;
2558         u32             phy;
2559
2560         if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
2561                 priv->phyNum = 0xFFFF;
2562                 return;
2563         }
2564
2565         TLan_MiiReadReg( dev, TLAN_PHY_MAX_ADDR, MII_GEN_ID_HI, &hi );
2566
2567         if ( hi != 0xFFFF ) {
2568                 priv->phy[0] = TLAN_PHY_MAX_ADDR;
2569         } else {
2570                 priv->phy[0] = TLAN_PHY_NONE;
2571         }
2572
2573         priv->phy[1] = TLAN_PHY_NONE;
2574         for ( phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++ ) {
2575                 TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &control );
2576                 TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &hi );
2577                 TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &lo );
2578                 if ( ( control != 0xFFFF ) ||
2579                      ( hi != 0xFFFF ) || ( lo != 0xFFFF ) ) {
2580                         TLAN_DBG( TLAN_DEBUG_GNRL,
2581                                   "PHY found at %02x %04x %04x %04x\n",
2582                                   phy, control, hi, lo );
2583                         if ( ( priv->phy[1] == TLAN_PHY_NONE ) &&
2584                              ( phy != TLAN_PHY_MAX_ADDR ) ) {
2585                                 priv->phy[1] = phy;
2586                         }
2587                 }
2588         }
2589
2590         if ( priv->phy[1] != TLAN_PHY_NONE ) {
2591                 priv->phyNum = 1;
2592         } else if ( priv->phy[0] != TLAN_PHY_NONE ) {
2593                 priv->phyNum = 0;
2594         } else {
2595                 printk( "TLAN:  Cannot initialize device, no PHY was found!\n" );
2596         }
2597
2598 } /* TLan_PhyDetect */
2599
2600
2601
2602
2603 static void TLan_PhyPowerDown( struct net_device *dev )
2604 {
2605         TLanPrivateInfo *priv = netdev_priv(dev);
2606         u16             value;
2607
2608         TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Powering down PHY(s).\n", dev->name );
2609         value = MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE;
2610         TLan_MiiSync( dev->base_addr );
2611         TLan_MiiWriteReg( dev, priv->phy[priv->phyNum], MII_GEN_CTL, value );
2612         if ( ( priv->phyNum == 0 ) &&
2613              ( priv->phy[1] != TLAN_PHY_NONE ) &&
2614              ( ! ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) ) ) {
2615                 TLan_MiiSync( dev->base_addr );
2616                 TLan_MiiWriteReg( dev, priv->phy[1], MII_GEN_CTL, value );
2617         }
2618
2619         /* Wait for 50 ms and powerup
2620          * This is abitrary.  It is intended to make sure the
2621          * transceiver settles.
2622          */
2623         TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_PUP );
2624
2625 } /* TLan_PhyPowerDown */
2626
2627
2628
2629
2630 static void TLan_PhyPowerUp( struct net_device *dev )
2631 {
2632         TLanPrivateInfo *priv = netdev_priv(dev);
2633         u16             value;
2634
2635         TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Powering up PHY.\n", dev->name );
2636         TLan_MiiSync( dev->base_addr );
2637         value = MII_GC_LOOPBK;
2638         TLan_MiiWriteReg( dev, priv->phy[priv->phyNum], MII_GEN_CTL, value );
2639         TLan_MiiSync(dev->base_addr);
2640         /* Wait for 500 ms and reset the
2641          * transceiver.  The TLAN docs say both 50 ms and
2642          * 500 ms, so do the longer, just in case.
2643          */
2644         TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_RESET );
2645
2646 } /* TLan_PhyPowerUp */
2647
2648
2649
2650
2651 static void TLan_PhyReset( struct net_device *dev )
2652 {
2653         TLanPrivateInfo *priv = netdev_priv(dev);
2654         u16             phy;
2655         u16             value;
2656
2657         phy = priv->phy[priv->phyNum];
2658
2659         TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Reseting PHY.\n", dev->name );
2660         TLan_MiiSync( dev->base_addr );
2661         value = MII_GC_LOOPBK | MII_GC_RESET;
2662         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, value );
2663         TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &value );
2664         while ( value & MII_GC_RESET ) {
2665                 TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &value );
2666         }
2667
2668         /* Wait for 500 ms and initialize.
2669          * I don't remember why I wait this long.
2670          * I've changed this to 50ms, as it seems long enough.
2671          */
2672         TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_START_LINK );
2673
2674 } /* TLan_PhyReset */
2675
2676
2677
2678
2679 static void TLan_PhyStartLink( struct net_device *dev )
2680 {
2681         TLanPrivateInfo *priv = netdev_priv(dev);
2682         u16             ability;
2683         u16             control;
2684         u16             data;
2685         u16             phy;
2686         u16             status;
2687         u16             tctl;
2688
2689         phy = priv->phy[priv->phyNum];
2690         TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Trying to activate link.\n", dev->name );
2691         TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
2692         TLan_MiiReadReg( dev, phy, MII_GEN_STS, &ability );
2693
2694         if ( ( status & MII_GS_AUTONEG ) &&
2695              ( ! priv->aui ) ) {
2696                 ability = status >> 11;
2697                 if ( priv->speed  == TLAN_SPEED_10 &&
2698                      priv->duplex == TLAN_DUPLEX_HALF) {
2699                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0000);
2700                 } else if ( priv->speed == TLAN_SPEED_10 &&
2701                             priv->duplex == TLAN_DUPLEX_FULL) {
2702                         priv->tlanFullDuplex = TRUE;
2703                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0100);
2704                 } else if ( priv->speed == TLAN_SPEED_100 &&
2705                             priv->duplex == TLAN_DUPLEX_HALF) {
2706                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2000);
2707                 } else if ( priv->speed == TLAN_SPEED_100 &&
2708                             priv->duplex == TLAN_DUPLEX_FULL) {
2709                         priv->tlanFullDuplex = TRUE;
2710                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2100);
2711                 } else {
2712
2713                         /* Set Auto-Neg advertisement */
2714                         TLan_MiiWriteReg( dev, phy, MII_AN_ADV, (ability << 5) | 1);
2715                         /* Enablee Auto-Neg */
2716                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x1000 );
2717                         /* Restart Auto-Neg */
2718                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x1200 );
2719                         /* Wait for 4 sec for autonegotiation
2720                         * to complete.  The max spec time is less than this
2721                         * but the card need additional time to start AN.
2722                         * .5 sec should be plenty extra.
2723                         */
2724                         printk( "TLAN: %s: Starting autonegotiation.\n", dev->name );
2725                         TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_PHY_FINISH_AN );
2726                         return;
2727                 }
2728
2729         }
2730
2731         if ( ( priv->aui ) && ( priv->phyNum != 0 ) ) {
2732                 priv->phyNum = 0;
2733                 data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
2734                 TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, data );
2735                 TLan_SetTimer( dev, (40*HZ/1000), TLAN_TIMER_PHY_PDOWN );
2736                 return;
2737         }  else if ( priv->phyNum == 0 ) {
2738                 control = 0;
2739                 TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tctl );
2740                 if ( priv->aui ) {
2741                         tctl |= TLAN_TC_AUISEL;
2742                 } else {
2743                         tctl &= ~TLAN_TC_AUISEL;
2744                         if ( priv->duplex == TLAN_DUPLEX_FULL ) {
2745                                 control |= MII_GC_DUPLEX;
2746                                 priv->tlanFullDuplex = TRUE;
2747                         }
2748                         if ( priv->speed == TLAN_SPEED_100 ) {
2749                                 control |= MII_GC_SPEEDSEL;
2750                         }
2751                 }
2752                 TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, control );
2753                 TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tctl );
2754         }
2755
2756         /* Wait for 2 sec to give the transceiver time
2757          * to establish link.
2758          */
2759         TLan_SetTimer( dev, (4*HZ), TLAN_TIMER_FINISH_RESET );
2760
2761 } /* TLan_PhyStartLink */
2762
2763
2764
2765
2766 static void TLan_PhyFinishAutoNeg( struct net_device *dev )
2767 {
2768         TLanPrivateInfo *priv = netdev_priv(dev);
2769         u16             an_adv;
2770         u16             an_lpa;
2771         u16             data;
2772         u16             mode;
2773         u16             phy;
2774         u16             status;
2775
2776         phy = priv->phy[priv->phyNum];
2777
2778         TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
2779         udelay( 1000 );
2780         TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
2781
2782         if ( ! ( status & MII_GS_AUTOCMPLT ) ) {
2783                 /* Wait for 8 sec to give the process
2784                  * more time.  Perhaps we should fail after a while.
2785                  */
2786                  if (!priv->neg_be_verbose++) {
2787                          pr_info("TLAN:  Giving autonegotiation more time.\n");
2788                          pr_info("TLAN:  Please check that your adapter has\n");
2789                          pr_info("TLAN:  been properly connected to a HUB or Switch.\n");
2790                          pr_info("TLAN:  Trying to establish link in the background...\n");
2791                  }
2792                 TLan_SetTimer( dev, (8*HZ), TLAN_TIMER_PHY_FINISH_AN );
2793                 return;
2794         }
2795
2796         printk( "TLAN: %s: Autonegotiation complete.\n", dev->name );
2797         TLan_MiiReadReg( dev, phy, MII_AN_ADV, &an_adv );
2798         TLan_MiiReadReg( dev, phy, MII_AN_LPA, &an_lpa );
2799         mode = an_adv & an_lpa & 0x03E0;
2800         if ( mode & 0x0100 ) {
2801                 priv->tlanFullDuplex = TRUE;
2802         } else if ( ! ( mode & 0x0080 ) && ( mode & 0x0040 ) ) {
2803                 priv->tlanFullDuplex = TRUE;
2804         }
2805
2806         if ( ( ! ( mode & 0x0180 ) ) &&
2807              ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) &&
2808              ( priv->phyNum != 0 ) ) {
2809                 priv->phyNum = 0;
2810                 data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
2811                 TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, data );
2812                 TLan_SetTimer( dev, (400*HZ/1000), TLAN_TIMER_PHY_PDOWN );
2813                 return;
2814         }
2815
2816         if ( priv->phyNum == 0 ) {
2817                 if ( ( priv->duplex == TLAN_DUPLEX_FULL ) ||
2818                      ( an_adv & an_lpa & 0x0040 ) ) {
2819                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL,
2820                                           MII_GC_AUTOENB | MII_GC_DUPLEX );
2821                         pr_info("TLAN:  Starting internal PHY with FULL-DUPLEX\n" );
2822                 } else {
2823                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, MII_GC_AUTOENB );
2824                         pr_info( "TLAN:  Starting internal PHY with HALF-DUPLEX\n" );
2825                 }
2826         }
2827
2828         /* Wait for 100 ms.  No reason in partiticular.
2829          */
2830         TLan_SetTimer( dev, (HZ/10), TLAN_TIMER_FINISH_RESET );
2831
2832 } /* TLan_PhyFinishAutoNeg */
2833
2834 #ifdef MONITOR
2835
2836         /*********************************************************************
2837         *
2838         *      TLan_phyMonitor
2839         *
2840         *      Returns:
2841         *              None
2842         *
2843         *      Params:
2844         *              dev             The device structure of this device.
2845         *
2846         *
2847         *      This function monitors PHY condition by reading the status
2848         *      register via the MII bus. This can be used to give info
2849         *      about link changes (up/down), and possible switch to alternate
2850         *      media.
2851         *
2852         * ******************************************************************/
2853
2854 void TLan_PhyMonitor( struct net_device *dev )
2855 {
2856         TLanPrivateInfo *priv = netdev_priv(dev);
2857         u16     phy;
2858         u16     phy_status;
2859
2860         phy = priv->phy[priv->phyNum];
2861
2862         /* Get PHY status register */
2863         TLan_MiiReadReg( dev, phy, MII_GEN_STS, &phy_status );
2864
2865         /* Check if link has been lost */
2866         if (!(phy_status & MII_GS_LINK)) {
2867                if (priv->link) {
2868                       priv->link = 0;
2869                       printk(KERN_DEBUG "TLAN: %s has lost link\n", dev->name);
2870                       netif_carrier_off(dev);
2871                       TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT );
2872                       return;
2873                 }
2874         }
2875
2876         /* Link restablished? */
2877         if ((phy_status & MII_GS_LINK) && !priv->link) {
2878                 priv->link = 1;
2879                 printk(KERN_DEBUG "TLAN: %s has reestablished link\n", dev->name);
2880                 netif_carrier_on(dev);
2881         }
2882
2883         /* Setup a new monitor */
2884         TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT );
2885 }
2886
2887 #endif /* MONITOR */
2888
2889
2890 /*****************************************************************************
2891 ******************************************************************************
2892
2893         ThunderLAN Driver MII Routines
2894
2895         These routines are based on the information in Chap. 2 of the
2896         "ThunderLAN Programmer's Guide", pp. 15-24.
2897
2898 ******************************************************************************
2899 *****************************************************************************/
2900
2901
2902         /***************************************************************
2903          *      TLan_MiiReadReg
2904          *
2905          *      Returns:
2906          *              0       if ack received ok
2907          *              1       otherwise.
2908          *
2909          *      Parms:
2910          *              dev             The device structure containing
2911          *                              The io address and interrupt count
2912          *                              for this device.
2913          *              phy             The address of the PHY to be queried.
2914          *              reg             The register whose contents are to be
2915          *                              retrieved.
2916          *              val             A pointer to a variable to store the
2917          *                              retrieved value.
2918          *
2919          *      This function uses the TLAN's MII bus to retrieve the contents
2920          *      of a given register on a PHY.  It sends the appropriate info
2921          *      and then reads the 16-bit register value from the MII bus via
2922          *      the TLAN SIO register.
2923          *
2924          **************************************************************/
2925
2926 static int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
2927 {
2928         u8      nack;
2929         u16     sio, tmp;
2930         u32     i;
2931         int     err;
2932         int     minten;
2933         TLanPrivateInfo *priv = netdev_priv(dev);
2934         unsigned long flags = 0;
2935
2936         err = FALSE;
2937         outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
2938         sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
2939
2940         if (!in_irq())
2941                 spin_lock_irqsave(&priv->lock, flags);
2942
2943         TLan_MiiSync(dev->base_addr);
2944
2945         minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
2946         if ( minten )
2947                 TLan_ClearBit(TLAN_NET_SIO_MINTEN, sio);
2948
2949         TLan_MiiSendData( dev->base_addr, 0x1, 2 );     /* Start ( 01b ) */
2950         TLan_MiiSendData( dev->base_addr, 0x2, 2 );     /* Read  ( 10b ) */
2951         TLan_MiiSendData( dev->base_addr, phy, 5 );     /* Device #      */
2952         TLan_MiiSendData( dev->base_addr, reg, 5 );     /* Register #    */
2953
2954
2955         TLan_ClearBit(TLAN_NET_SIO_MTXEN, sio);         /* Change direction */
2956
2957         TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);          /* Clock Idle bit */
2958         TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
2959         TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);          /* Wait 300ns */
2960
2961         nack = TLan_GetBit(TLAN_NET_SIO_MDATA, sio);    /* Check for ACK */
2962         TLan_SetBit(TLAN_NET_SIO_MCLK, sio);            /* Finish ACK */
2963         if (nack) {                                     /* No ACK, so fake it */
2964                 for (i = 0; i < 16; i++) {
2965                         TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
2966                         TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
2967                 }
2968                 tmp = 0xffff;
2969                 err = TRUE;
2970         } else {                                        /* ACK, so read data */
2971                 for (tmp = 0, i = 0x8000; i; i >>= 1) {
2972                         TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
2973                         if (TLan_GetBit(TLAN_NET_SIO_MDATA, sio))
2974                                 tmp |= i;
2975                         TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
2976                 }
2977         }
2978
2979
2980         TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);          /* Idle cycle */
2981         TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
2982
2983         if ( minten )
2984                 TLan_SetBit(TLAN_NET_SIO_MINTEN, sio);
2985
2986         *val = tmp;
2987
2988         if (!in_irq())
2989                 spin_unlock_irqrestore(&priv->lock, flags);
2990
2991         return err;
2992
2993 } /* TLan_MiiReadReg */
2994
2995
2996
2997
2998         /***************************************************************
2999          *      TLan_MiiSendData
3000          *
3001          *      Returns:
3002          *              Nothing
3003          *      Parms:
3004          *              base_port       The base IO port of the adapter in
3005          *                              question.
3006          *              dev             The address of the PHY to be queried.
3007          *              data            The value to be placed on the MII bus.
3008          *              num_bits        The number of bits in data that are to
3009          *                              be placed on the MII bus.
3010          *
3011          *      This function sends on sequence of bits on the MII
3012          *      configuration bus.
3013          *
3014          **************************************************************/
3015
3016 static void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
3017 {
3018         u16 sio;
3019         u32 i;
3020
3021         if ( num_bits == 0 )
3022                 return;
3023
3024         outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
3025         sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
3026         TLan_SetBit( TLAN_NET_SIO_MTXEN, sio );
3027
3028         for ( i = ( 0x1 << ( num_bits - 1 ) ); i; i >>= 1 ) {
3029                 TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
3030                 (void) TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
3031                 if ( data & i )
3032                         TLan_SetBit( TLAN_NET_SIO_MDATA, sio );
3033                 else
3034                         TLan_ClearBit( TLAN_NET_SIO_MDATA, sio );
3035                 TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
3036                 (void) TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
3037         }
3038
3039 } /* TLan_MiiSendData */
3040
3041
3042
3043
3044         /***************************************************************
3045          *      TLan_MiiSync
3046          *
3047          *      Returns:
3048          *              Nothing
3049          *      Parms:
3050          *              base_port       The base IO port of the adapter in
3051          *                              question.
3052          *
3053          *      This functions syncs all PHYs in terms of the MII configuration
3054          *      bus.
3055          *
3056          **************************************************************/
3057
3058 static void TLan_MiiSync( u16 base_port )
3059 {
3060         int i;
3061         u16 sio;
3062
3063         outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
3064         sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
3065
3066         TLan_ClearBit( TLAN_NET_SIO_MTXEN, sio );
3067         for ( i = 0; i < 32; i++ ) {
3068                 TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
3069                 TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
3070         }
3071
3072 } /* TLan_MiiSync */
3073
3074
3075
3076
3077         /***************************************************************
3078          *      TLan_MiiWriteReg
3079          *
3080          *      Returns:
3081          *              Nothing
3082          *      Parms:
3083          *              dev             The device structure for the device
3084          *                              to write to.
3085          *              phy             The address of the PHY to be written to.
3086          *              reg             The register whose contents are to be
3087          *                              written.
3088          *              val             The value to be written to the register.
3089          *
3090          *      This function uses the TLAN's MII bus to write the contents of a
3091          *      given register on a PHY.  It sends the appropriate info and then
3092          *      writes the 16-bit register value from the MII configuration bus
3093          *      via the TLAN SIO register.
3094          *
3095          **************************************************************/
3096
3097 static void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val )
3098 {
3099         u16     sio;
3100         int     minten;
3101         unsigned long flags = 0;
3102         TLanPrivateInfo *priv = netdev_priv(dev);
3103
3104         outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
3105         sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
3106
3107         if (!in_irq())
3108                 spin_lock_irqsave(&priv->lock, flags);
3109
3110         TLan_MiiSync( dev->base_addr );
3111
3112         minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
3113         if ( minten )
3114                 TLan_ClearBit( TLAN_NET_SIO_MINTEN, sio );
3115
3116         TLan_MiiSendData( dev->base_addr, 0x1, 2 );     /* Start ( 01b ) */
3117         TLan_MiiSendData( dev->base_addr, 0x1, 2 );     /* Write ( 01b ) */
3118         TLan_MiiSendData( dev->base_addr, phy, 5 );     /* Device #      */
3119         TLan_MiiSendData( dev->base_addr, reg, 5 );     /* Register #    */
3120
3121         TLan_MiiSendData( dev->base_addr, 0x2, 2 );     /* Send ACK */
3122         TLan_MiiSendData( dev->base_addr, val, 16 );    /* Send Data */
3123
3124         TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );        /* Idle cycle */
3125         TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
3126
3127         if ( minten )
3128                 TLan_SetBit( TLAN_NET_SIO_MINTEN, sio );
3129
3130         if (!in_irq())
3131                 spin_unlock_irqrestore(&priv->lock, flags);
3132
3133 } /* TLan_MiiWriteReg */
3134
3135
3136
3137
3138 /*****************************************************************************
3139 ******************************************************************************
3140
3141         ThunderLAN Driver Eeprom routines
3142
3143         The Compaq Netelligent 10 and 10/100 cards use a Microchip 24C02A
3144         EEPROM.  These functions are based on information in Microchip's
3145         data sheet.  I don't know how well this functions will work with
3146         other EEPROMs.
3147
3148 ******************************************************************************
3149 *****************************************************************************/
3150
3151
3152         /***************************************************************
3153          *      TLan_EeSendStart
3154          *
3155          *      Returns:
3156          *              Nothing
3157          *      Parms:
3158          *              io_base         The IO port base address for the
3159          *                              TLAN device with the EEPROM to
3160          *                              use.
3161          *
3162          *      This function sends a start cycle to an EEPROM attached
3163          *      to a TLAN chip.
3164          *
3165          **************************************************************/
3166
3167 static void TLan_EeSendStart( u16 io_base )
3168 {
3169         u16     sio;
3170
3171         outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
3172         sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
3173
3174         TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3175         TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
3176         TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
3177         TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
3178         TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3179
3180 } /* TLan_EeSendStart */
3181
3182
3183
3184
3185         /***************************************************************
3186          *      TLan_EeSendByte
3187          *
3188          *      Returns:
3189          *              If the correct ack was received, 0, otherwise 1
3190          *      Parms:  io_base         The IO port base address for the
3191          *                              TLAN device with the EEPROM to
3192          *                              use.
3193          *              data            The 8 bits of information to
3194          *                              send to the EEPROM.
3195          *              stop            If TLAN_EEPROM_STOP is passed, a
3196          *                              stop cycle is sent after the
3197          *                              byte is sent after the ack is
3198          *                              read.
3199          *
3200          *      This function sends a byte on the serial EEPROM line,
3201          *      driving the clock to send each bit. The function then
3202          *      reverses transmission direction and reads an acknowledge
3203          *      bit.
3204          *
3205          **************************************************************/
3206
3207 static int TLan_EeSendByte( u16 io_base, u8 data, int stop )
3208 {
3209         int     err;
3210         u8      place;
3211         u16     sio;
3212
3213         outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
3214         sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
3215
3216         /* Assume clock is low, tx is enabled; */
3217         for ( place = 0x80; place != 0; place >>= 1 ) {
3218                 if ( place & data )
3219                         TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
3220                 else
3221                         TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
3222                 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3223                 TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3224         }
3225         TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
3226         TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3227         err = TLan_GetBit( TLAN_NET_SIO_EDATA, sio );
3228         TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3229         TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
3230
3231         if ( ( ! err ) && stop ) {
3232                 /* STOP, raise data while clock is high */
3233                 TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
3234                 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3235                 TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
3236         }
3237
3238         return ( err );
3239
3240 } /* TLan_EeSendByte */
3241
3242
3243
3244
3245         /***************************************************************
3246          *      TLan_EeReceiveByte
3247          *
3248          *      Returns:
3249          *              Nothing
3250          *      Parms:
3251          *              io_base         The IO port base address for the
3252          *                              TLAN device with the EEPROM to
3253          *                              use.
3254          *              data            An address to a char to hold the
3255          *                              data sent from the EEPROM.
3256          *              stop            If TLAN_EEPROM_STOP is passed, a
3257          *                              stop cycle is sent after the
3258          *                              byte is received, and no ack is
3259          *                              sent.
3260          *
3261          *      This function receives 8 bits of data from the EEPROM
3262          *      over the serial link.  It then sends and ack bit, or no
3263          *      ack and a stop bit.  This function is used to retrieve
3264          *      data after the address of a byte in the EEPROM has been
3265          *      sent.
3266          *
3267          **************************************************************/
3268
3269 static void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
3270 {
3271         u8  place;
3272         u16 sio;
3273
3274         outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
3275         sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
3276         *data = 0;
3277
3278         /* Assume clock is low, tx is enabled; */
3279         TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
3280         for ( place = 0x80; place; place >>= 1 ) {
3281                 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3282                 if ( TLan_GetBit( TLAN_NET_SIO_EDATA, sio ) )
3283                         *data |= place;
3284                 TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3285         }
3286
3287         TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
3288         if ( ! stop ) {
3289                 TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );       /* Ack = 0 */
3290                 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3291                 TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3292         } else {
3293                 TLan_SetBit( TLAN_NET_SIO_EDATA, sio );         /* No ack = 1 (?) */
3294                 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3295                 TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3296                 /* STOP, raise data while clock is high */
3297                 TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
3298                 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3299                 TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
3300         }
3301
3302 } /* TLan_EeReceiveByte */
3303
3304
3305
3306
3307         /***************************************************************
3308          *      TLan_EeReadByte
3309          *
3310          *      Returns:
3311          *              No error = 0, else, the stage at which the error
3312          *              occurred.
3313          *      Parms:
3314          *              io_base         The IO port base address for the
3315          *                              TLAN device with the EEPROM to
3316          *                              use.
3317          *              ee_addr         The address of the byte in the
3318          *                              EEPROM whose contents are to be
3319          *                              retrieved.
3320          *              data            An address to a char to hold the
3321          *                              data obtained from the EEPROM.
3322          *
3323          *      This function reads a byte of information from an byte
3324          *      cell in the EEPROM.
3325          *
3326          **************************************************************/
3327
3328 static int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data )
3329 {
3330         int err;
3331         TLanPrivateInfo *priv = netdev_priv(dev);
3332         unsigned long flags = 0;
3333         int ret=0;
3334
3335         spin_lock_irqsave(&priv->lock, flags);
3336
3337         TLan_EeSendStart( dev->base_addr );
3338         err = TLan_EeSendByte( dev->base_addr, 0xA0, TLAN_EEPROM_ACK );
3339         if (err)
3340         {
3341                 ret=1;
3342                 goto fail;
3343         }
3344         err = TLan_EeSendByte( dev->base_addr, ee_addr, TLAN_EEPROM_ACK );
3345         if (err)
3346         {
3347                 ret=2;
3348                 goto fail;
3349         }
3350         TLan_EeSendStart( dev->base_addr );
3351         err = TLan_EeSendByte( dev->base_addr, 0xA1, TLAN_EEPROM_ACK );
3352         if (err)
3353         {
3354                 ret=3;
3355                 goto fail;
3356         }
3357         TLan_EeReceiveByte( dev->base_addr, data, TLAN_EEPROM_STOP );
3358 fail:
3359         spin_unlock_irqrestore(&priv->lock, flags);
3360
3361         return ret;
3362
3363 } /* TLan_EeReadByte */
3364
3365
3366