/home/lenb/src/to-linus branch 'acpi-2.6.12'
[linux-2.6] / drivers / video / pxafb.c
1 /*
2  *  linux/drivers/video/pxafb.c
3  *
4  *  Copyright (C) 1999 Eric A. Thomas.
5  *  Copyright (C) 2004 Jean-Frederic Clere.
6  *  Copyright (C) 2004 Ian Campbell.
7  *  Copyright (C) 2004 Jeff Lackey.
8  *   Based on sa1100fb.c Copyright (C) 1999 Eric A. Thomas
9  *  which in turn is
10  *   Based on acornfb.c Copyright (C) Russell King.
11  *
12  * This file is subject to the terms and conditions of the GNU General Public
13  * License.  See the file COPYING in the main directory of this archive for
14  * more details.
15  *
16  *              Intel PXA250/210 LCD Controller Frame Buffer Driver
17  *
18  * Please direct your questions and comments on this driver to the following
19  * email address:
20  *
21  *      linux-arm-kernel@lists.arm.linux.org.uk
22  *
23  */
24
25 #include <linux/config.h>
26 #include <linux/module.h>
27 #include <linux/moduleparam.h>
28 #include <linux/kernel.h>
29 #include <linux/sched.h>
30 #include <linux/errno.h>
31 #include <linux/string.h>
32 #include <linux/interrupt.h>
33 #include <linux/slab.h>
34 #include <linux/fb.h>
35 #include <linux/delay.h>
36 #include <linux/init.h>
37 #include <linux/ioport.h>
38 #include <linux/cpufreq.h>
39 #include <linux/device.h>
40 #include <linux/dma-mapping.h>
41
42 #include <asm/hardware.h>
43 #include <asm/io.h>
44 #include <asm/irq.h>
45 #include <asm/uaccess.h>
46 #include <asm/div64.h>
47 #include <asm/arch/pxa-regs.h>
48 #include <asm/arch/bitfield.h>
49 #include <asm/arch/pxafb.h>
50
51 /*
52  * Complain if VAR is out of range.
53  */
54 #define DEBUG_VAR 1
55
56 #include "pxafb.h"
57
58 /* Bits which should not be set in machine configuration structures */
59 #define LCCR0_INVALID_CONFIG_MASK (LCCR0_OUM|LCCR0_BM|LCCR0_QDM|LCCR0_DIS|LCCR0_EFM|LCCR0_IUM|LCCR0_SFM|LCCR0_LDM|LCCR0_ENB)
60 #define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP|LCCR3_VSP|LCCR3_PCD|LCCR3_BPP)
61
62 static void (*pxafb_backlight_power)(int);
63 static void (*pxafb_lcd_power)(int);
64
65 static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *);
66 static void set_ctrlr_state(struct pxafb_info *fbi, u_int state);
67
68 #ifdef CONFIG_FB_PXA_PARAMETERS
69 #define PXAFB_OPTIONS_SIZE 256
70 static char g_options[PXAFB_OPTIONS_SIZE] __initdata = "";
71 #endif
72
73 static inline void pxafb_schedule_work(struct pxafb_info *fbi, u_int state)
74 {
75         unsigned long flags;
76
77         local_irq_save(flags);
78         /*
79          * We need to handle two requests being made at the same time.
80          * There are two important cases:
81          *  1. When we are changing VT (C_REENABLE) while unblanking (C_ENABLE)
82          *     We must perform the unblanking, which will do our REENABLE for us.
83          *  2. When we are blanking, but immediately unblank before we have
84          *     blanked.  We do the "REENABLE" thing here as well, just to be sure.
85          */
86         if (fbi->task_state == C_ENABLE && state == C_REENABLE)
87                 state = (u_int) -1;
88         if (fbi->task_state == C_DISABLE && state == C_ENABLE)
89                 state = C_REENABLE;
90
91         if (state != (u_int)-1) {
92                 fbi->task_state = state;
93                 schedule_work(&fbi->task);
94         }
95         local_irq_restore(flags);
96 }
97
98 static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf)
99 {
100         chan &= 0xffff;
101         chan >>= 16 - bf->length;
102         return chan << bf->offset;
103 }
104
105 static int
106 pxafb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue,
107                        u_int trans, struct fb_info *info)
108 {
109         struct pxafb_info *fbi = (struct pxafb_info *)info;
110         u_int val, ret = 1;
111
112         if (regno < fbi->palette_size) {
113                 if (fbi->fb.var.grayscale) {
114                         val = ((blue >> 8) & 0x00ff);
115                 } else {
116                         val  = ((red   >>  0) & 0xf800);
117                         val |= ((green >>  5) & 0x07e0);
118                         val |= ((blue  >> 11) & 0x001f);
119                 }
120                 fbi->palette_cpu[regno] = val;
121                 ret = 0;
122         }
123         return ret;
124 }
125
126 static int
127 pxafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
128                    u_int trans, struct fb_info *info)
129 {
130         struct pxafb_info *fbi = (struct pxafb_info *)info;
131         unsigned int val;
132         int ret = 1;
133
134         /*
135          * If inverse mode was selected, invert all the colours
136          * rather than the register number.  The register number
137          * is what you poke into the framebuffer to produce the
138          * colour you requested.
139          */
140         if (fbi->cmap_inverse) {
141                 red   = 0xffff - red;
142                 green = 0xffff - green;
143                 blue  = 0xffff - blue;
144         }
145
146         /*
147          * If greyscale is true, then we convert the RGB value
148          * to greyscale no matter what visual we are using.
149          */
150         if (fbi->fb.var.grayscale)
151                 red = green = blue = (19595 * red + 38470 * green +
152                                         7471 * blue) >> 16;
153
154         switch (fbi->fb.fix.visual) {
155         case FB_VISUAL_TRUECOLOR:
156                 /*
157                  * 16-bit True Colour.  We encode the RGB value
158                  * according to the RGB bitfield information.
159                  */
160                 if (regno < 16) {
161                         u32 *pal = fbi->fb.pseudo_palette;
162
163                         val  = chan_to_field(red, &fbi->fb.var.red);
164                         val |= chan_to_field(green, &fbi->fb.var.green);
165                         val |= chan_to_field(blue, &fbi->fb.var.blue);
166
167                         pal[regno] = val;
168                         ret = 0;
169                 }
170                 break;
171
172         case FB_VISUAL_STATIC_PSEUDOCOLOR:
173         case FB_VISUAL_PSEUDOCOLOR:
174                 ret = pxafb_setpalettereg(regno, red, green, blue, trans, info);
175                 break;
176         }
177
178         return ret;
179 }
180
181 /*
182  *  pxafb_bpp_to_lccr3():
183  *    Convert a bits per pixel value to the correct bit pattern for LCCR3
184  */
185 static int pxafb_bpp_to_lccr3(struct fb_var_screeninfo *var)
186 {
187         int ret = 0;
188         switch (var->bits_per_pixel) {
189         case 1:  ret = LCCR3_1BPP; break;
190         case 2:  ret = LCCR3_2BPP; break;
191         case 4:  ret = LCCR3_4BPP; break;
192         case 8:  ret = LCCR3_8BPP; break;
193         case 16: ret = LCCR3_16BPP; break;
194         }
195         return ret;
196 }
197
198 #ifdef CONFIG_CPU_FREQ
199 /*
200  *  pxafb_display_dma_period()
201  *    Calculate the minimum period (in picoseconds) between two DMA
202  *    requests for the LCD controller.  If we hit this, it means we're
203  *    doing nothing but LCD DMA.
204  */
205 static unsigned int pxafb_display_dma_period(struct fb_var_screeninfo *var)
206 {
207        /*
208         * Period = pixclock * bits_per_byte * bytes_per_transfer
209         *              / memory_bits_per_pixel;
210         */
211        return var->pixclock * 8 * 16 / var->bits_per_pixel;
212 }
213
214 extern unsigned int get_clk_frequency_khz(int info);
215 #endif
216
217 /*
218  *  pxafb_check_var():
219  *    Get the video params out of 'var'. If a value doesn't fit, round it up,
220  *    if it's too big, return -EINVAL.
221  *
222  *    Round up in the following order: bits_per_pixel, xres,
223  *    yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
224  *    bitfields, horizontal timing, vertical timing.
225  */
226 static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
227 {
228         struct pxafb_info *fbi = (struct pxafb_info *)info;
229
230         if (var->xres < MIN_XRES)
231                 var->xres = MIN_XRES;
232         if (var->yres < MIN_YRES)
233                 var->yres = MIN_YRES;
234         if (var->xres > fbi->max_xres)
235                 var->xres = fbi->max_xres;
236         if (var->yres > fbi->max_yres)
237                 var->yres = fbi->max_yres;
238         var->xres_virtual =
239                 max(var->xres_virtual, var->xres);
240         var->yres_virtual =
241                 max(var->yres_virtual, var->yres);
242
243         /*
244          * Setup the RGB parameters for this display.
245          *
246          * The pixel packing format is described on page 7-11 of the
247          * PXA2XX Developer's Manual.
248          */
249         if (var->bits_per_pixel == 16) {
250                 var->red.offset   = 11; var->red.length   = 5;
251                 var->green.offset = 5;  var->green.length = 6;
252                 var->blue.offset  = 0;  var->blue.length  = 5;
253                 var->transp.offset = var->transp.length = 0;
254         } else {
255                 var->red.offset = var->green.offset = var->blue.offset = var->transp.offset = 0;
256                 var->red.length   = 8;
257                 var->green.length = 8;
258                 var->blue.length  = 8;
259                 var->transp.length = 0;
260         }
261
262 #ifdef CONFIG_CPU_FREQ
263         DPRINTK("dma period = %d ps, clock = %d kHz\n",
264                 pxafb_display_dma_period(var),
265                 get_clk_frequency_khz(0));
266 #endif
267
268         return 0;
269 }
270
271 static inline void pxafb_set_truecolor(u_int is_true_color)
272 {
273         DPRINTK("true_color = %d\n", is_true_color);
274         // do your machine-specific setup if needed
275 }
276
277 /*
278  * pxafb_set_par():
279  *      Set the user defined part of the display for the specified console
280  */
281 static int pxafb_set_par(struct fb_info *info)
282 {
283         struct pxafb_info *fbi = (struct pxafb_info *)info;
284         struct fb_var_screeninfo *var = &info->var;
285         unsigned long palette_mem_size;
286
287         DPRINTK("set_par\n");
288
289         if (var->bits_per_pixel == 16)
290                 fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
291         else if (!fbi->cmap_static)
292                 fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
293         else {
294                 /*
295                  * Some people have weird ideas about wanting static
296                  * pseudocolor maps.  I suspect their user space
297                  * applications are broken.
298                  */
299                 fbi->fb.fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
300         }
301
302         fbi->fb.fix.line_length = var->xres_virtual *
303                                   var->bits_per_pixel / 8;
304         if (var->bits_per_pixel == 16)
305                 fbi->palette_size = 0;
306         else
307                 fbi->palette_size = var->bits_per_pixel == 1 ? 4 : 1 << var->bits_per_pixel;
308
309         palette_mem_size = fbi->palette_size * sizeof(u16);
310
311         DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
312
313         fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
314         fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
315
316         /*
317          * Set (any) board control register to handle new color depth
318          */
319         pxafb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR);
320
321         if (fbi->fb.var.bits_per_pixel == 16)
322                 fb_dealloc_cmap(&fbi->fb.cmap);
323         else
324                 fb_alloc_cmap(&fbi->fb.cmap, 1<<fbi->fb.var.bits_per_pixel, 0);
325
326         pxafb_activate_var(var, fbi);
327
328         return 0;
329 }
330
331 /*
332  * Formal definition of the VESA spec:
333  *  On
334  *      This refers to the state of the display when it is in full operation
335  *  Stand-By
336  *      This defines an optional operating state of minimal power reduction with
337  *      the shortest recovery time
338  *  Suspend
339  *      This refers to a level of power management in which substantial power
340  *      reduction is achieved by the display.  The display can have a longer
341  *      recovery time from this state than from the Stand-by state
342  *  Off
343  *      This indicates that the display is consuming the lowest level of power
344  *      and is non-operational. Recovery from this state may optionally require
345  *      the user to manually power on the monitor
346  *
347  *  Now, the fbdev driver adds an additional state, (blank), where they
348  *  turn off the video (maybe by colormap tricks), but don't mess with the
349  *  video itself: think of it semantically between on and Stand-By.
350  *
351  *  So here's what we should do in our fbdev blank routine:
352  *
353  *      VESA_NO_BLANKING (mode 0)       Video on,  front/back light on
354  *      VESA_VSYNC_SUSPEND (mode 1)     Video on,  front/back light off
355  *      VESA_HSYNC_SUSPEND (mode 2)     Video on,  front/back light off
356  *      VESA_POWERDOWN (mode 3)         Video off, front/back light off
357  *
358  *  This will match the matrox implementation.
359  */
360
361 /*
362  * pxafb_blank():
363  *      Blank the display by setting all palette values to zero.  Note, the
364  *      16 bpp mode does not really use the palette, so this will not
365  *      blank the display in all modes.
366  */
367 static int pxafb_blank(int blank, struct fb_info *info)
368 {
369         struct pxafb_info *fbi = (struct pxafb_info *)info;
370         int i;
371
372         DPRINTK("pxafb_blank: blank=%d\n", blank);
373
374         switch (blank) {
375         case FB_BLANK_POWERDOWN:
376         case FB_BLANK_VSYNC_SUSPEND:
377         case FB_BLANK_HSYNC_SUSPEND:
378         case FB_BLANK_NORMAL:
379                 if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
380                     fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
381                         for (i = 0; i < fbi->palette_size; i++)
382                                 pxafb_setpalettereg(i, 0, 0, 0, 0, info);
383
384                 pxafb_schedule_work(fbi, C_DISABLE);
385                 //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank);
386                 break;
387
388         case FB_BLANK_UNBLANK:
389                 //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank);
390                 if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
391                     fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
392                         fb_set_cmap(&fbi->fb.cmap, info);
393                 pxafb_schedule_work(fbi, C_ENABLE);
394         }
395         return 0;
396 }
397
398 static int pxafb_mmap(struct fb_info *info, struct file *file,
399                       struct vm_area_struct *vma)
400 {
401         struct pxafb_info *fbi = (struct pxafb_info *)info;
402         unsigned long off = vma->vm_pgoff << PAGE_SHIFT;
403
404         if (off < info->fix.smem_len) {
405                 vma->vm_pgoff += 1;
406                 return dma_mmap_writecombine(fbi->dev, vma, fbi->map_cpu,
407                                              fbi->map_dma, fbi->map_size);
408         }
409         return -EINVAL;
410 }
411
412 static struct fb_ops pxafb_ops = {
413         .owner          = THIS_MODULE,
414         .fb_check_var   = pxafb_check_var,
415         .fb_set_par     = pxafb_set_par,
416         .fb_setcolreg   = pxafb_setcolreg,
417         .fb_fillrect    = cfb_fillrect,
418         .fb_copyarea    = cfb_copyarea,
419         .fb_imageblit   = cfb_imageblit,
420         .fb_blank       = pxafb_blank,
421         .fb_cursor      = soft_cursor,
422         .fb_mmap        = pxafb_mmap,
423 };
424
425 /*
426  * Calculate the PCD value from the clock rate (in picoseconds).
427  * We take account of the PPCR clock setting.
428  * From PXA Developer's Manual:
429  *
430  *   PixelClock =      LCLK
431  *                -------------
432  *                2 ( PCD + 1 )
433  *
434  *   PCD =      LCLK
435  *         ------------- - 1
436  *         2(PixelClock)
437  *
438  * Where:
439  *   LCLK = LCD/Memory Clock
440  *   PCD = LCCR3[7:0]
441  *
442  * PixelClock here is in Hz while the pixclock argument given is the
443  * period in picoseconds. Hence PixelClock = 1 / ( pixclock * 10^-12 )
444  *
445  * The function get_lclk_frequency_10khz returns LCLK in units of
446  * 10khz. Calling the result of this function lclk gives us the
447  * following
448  *
449  *    PCD = (lclk * 10^4 ) * ( pixclock * 10^-12 )
450  *          -------------------------------------- - 1
451  *                          2
452  *
453  * Factoring the 10^4 and 10^-12 out gives 10^-8 == 1 / 100000000 as used below.
454  */
455 static inline unsigned int get_pcd(unsigned int pixclock)
456 {
457         unsigned long long pcd;
458
459         /* FIXME: Need to take into account Double Pixel Clock mode
460          * (DPC) bit? or perhaps set it based on the various clock
461          * speeds */
462
463         pcd = (unsigned long long)get_lcdclk_frequency_10khz() * pixclock;
464         do_div(pcd, 100000000 * 2);
465         /* no need for this, since we should subtract 1 anyway. they cancel */
466         /* pcd += 1; */ /* make up for integer math truncations */
467         return (unsigned int)pcd;
468 }
469
470 /*
471  * pxafb_activate_var():
472  *      Configures LCD Controller based on entries in var parameter.  Settings are
473  *      only written to the controller if changes were made.
474  */
475 static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *fbi)
476 {
477         struct pxafb_lcd_reg new_regs;
478         u_long flags;
479         u_int lines_per_panel, pcd = get_pcd(var->pixclock);
480
481         DPRINTK("Configuring PXA LCD\n");
482
483         DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n",
484                 var->xres, var->hsync_len,
485                 var->left_margin, var->right_margin);
486         DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n",
487                 var->yres, var->vsync_len,
488                 var->upper_margin, var->lower_margin);
489         DPRINTK("var: pixclock=%d pcd=%d\n", var->pixclock, pcd);
490
491 #if DEBUG_VAR
492         if (var->xres < 16        || var->xres > 1024)
493                 printk(KERN_ERR "%s: invalid xres %d\n",
494                         fbi->fb.fix.id, var->xres);
495         switch(var->bits_per_pixel) {
496         case 1:
497         case 2:
498         case 4:
499         case 8:
500         case 16:
501                 break;
502         default:
503                 printk(KERN_ERR "%s: invalid bit depth %d\n",
504                        fbi->fb.fix.id, var->bits_per_pixel);
505                 break;
506         }
507         if (var->hsync_len < 1    || var->hsync_len > 64)
508                 printk(KERN_ERR "%s: invalid hsync_len %d\n",
509                         fbi->fb.fix.id, var->hsync_len);
510         if (var->left_margin < 1  || var->left_margin > 255)
511                 printk(KERN_ERR "%s: invalid left_margin %d\n",
512                         fbi->fb.fix.id, var->left_margin);
513         if (var->right_margin < 1 || var->right_margin > 255)
514                 printk(KERN_ERR "%s: invalid right_margin %d\n",
515                         fbi->fb.fix.id, var->right_margin);
516         if (var->yres < 1         || var->yres > 1024)
517                 printk(KERN_ERR "%s: invalid yres %d\n",
518                         fbi->fb.fix.id, var->yres);
519         if (var->vsync_len < 1    || var->vsync_len > 64)
520                 printk(KERN_ERR "%s: invalid vsync_len %d\n",
521                         fbi->fb.fix.id, var->vsync_len);
522         if (var->upper_margin < 0 || var->upper_margin > 255)
523                 printk(KERN_ERR "%s: invalid upper_margin %d\n",
524                         fbi->fb.fix.id, var->upper_margin);
525         if (var->lower_margin < 0 || var->lower_margin > 255)
526                 printk(KERN_ERR "%s: invalid lower_margin %d\n",
527                         fbi->fb.fix.id, var->lower_margin);
528 #endif
529
530         new_regs.lccr0 = fbi->lccr0 |
531                 (LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM |
532                  LCCR0_QDM | LCCR0_BM  | LCCR0_OUM);
533
534         new_regs.lccr1 =
535                 LCCR1_DisWdth(var->xres) +
536                 LCCR1_HorSnchWdth(var->hsync_len) +
537                 LCCR1_BegLnDel(var->left_margin) +
538                 LCCR1_EndLnDel(var->right_margin);
539
540         /*
541          * If we have a dual scan LCD, we need to halve
542          * the YRES parameter.
543          */
544         lines_per_panel = var->yres;
545         if ((fbi->lccr0 & LCCR0_SDS) == LCCR0_Dual)
546                 lines_per_panel /= 2;
547
548         new_regs.lccr2 =
549                 LCCR2_DisHght(lines_per_panel) +
550                 LCCR2_VrtSnchWdth(var->vsync_len) +
551                 LCCR2_BegFrmDel(var->upper_margin) +
552                 LCCR2_EndFrmDel(var->lower_margin);
553
554         new_regs.lccr3 = fbi->lccr3 |
555                 pxafb_bpp_to_lccr3(var) |
556                 (var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
557                 (var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
558
559         if (pcd)
560                 new_regs.lccr3 |= LCCR3_PixClkDiv(pcd);
561
562         DPRINTK("nlccr0 = 0x%08x\n", new_regs.lccr0);
563         DPRINTK("nlccr1 = 0x%08x\n", new_regs.lccr1);
564         DPRINTK("nlccr2 = 0x%08x\n", new_regs.lccr2);
565         DPRINTK("nlccr3 = 0x%08x\n", new_regs.lccr3);
566
567         /* Update shadow copy atomically */
568         local_irq_save(flags);
569
570         /* setup dma descriptors */
571         fbi->dmadesc_fblow_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 3*16);
572         fbi->dmadesc_fbhigh_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 2*16);
573         fbi->dmadesc_palette_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 1*16);
574
575         fbi->dmadesc_fblow_dma = fbi->palette_dma - 3*16;
576         fbi->dmadesc_fbhigh_dma = fbi->palette_dma - 2*16;
577         fbi->dmadesc_palette_dma = fbi->palette_dma - 1*16;
578
579 #define BYTES_PER_PANEL (lines_per_panel * fbi->fb.fix.line_length)
580
581         /* populate descriptors */
582         fbi->dmadesc_fblow_cpu->fdadr = fbi->dmadesc_fblow_dma;
583         fbi->dmadesc_fblow_cpu->fsadr = fbi->screen_dma + BYTES_PER_PANEL;
584         fbi->dmadesc_fblow_cpu->fidr  = 0;
585         fbi->dmadesc_fblow_cpu->ldcmd = BYTES_PER_PANEL;
586
587         fbi->fdadr1 = fbi->dmadesc_fblow_dma; /* only used in dual-panel mode */
588
589         fbi->dmadesc_fbhigh_cpu->fsadr = fbi->screen_dma;
590         fbi->dmadesc_fbhigh_cpu->fidr = 0;
591         fbi->dmadesc_fbhigh_cpu->ldcmd = BYTES_PER_PANEL;
592
593         fbi->dmadesc_palette_cpu->fsadr = fbi->palette_dma;
594         fbi->dmadesc_palette_cpu->fidr  = 0;
595         fbi->dmadesc_palette_cpu->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL;
596
597         if (var->bits_per_pixel == 16) {
598                 /* palette shouldn't be loaded in true-color mode */
599                 fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_fbhigh_dma;
600                 fbi->fdadr0 = fbi->dmadesc_fbhigh_dma; /* no pal just fbhigh */
601                 /* init it to something, even though we won't be using it */
602                 fbi->dmadesc_palette_cpu->fdadr = fbi->dmadesc_palette_dma;
603         } else {
604                 fbi->dmadesc_palette_cpu->fdadr = fbi->dmadesc_fbhigh_dma;
605                 fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_palette_dma;
606                 fbi->fdadr0 = fbi->dmadesc_palette_dma; /* flips back and forth between pal and fbhigh */
607         }
608
609 #if 0
610         DPRINTK("fbi->dmadesc_fblow_cpu = 0x%p\n", fbi->dmadesc_fblow_cpu);
611         DPRINTK("fbi->dmadesc_fbhigh_cpu = 0x%p\n", fbi->dmadesc_fbhigh_cpu);
612         DPRINTK("fbi->dmadesc_palette_cpu = 0x%p\n", fbi->dmadesc_palette_cpu);
613         DPRINTK("fbi->dmadesc_fblow_dma = 0x%x\n", fbi->dmadesc_fblow_dma);
614         DPRINTK("fbi->dmadesc_fbhigh_dma = 0x%x\n", fbi->dmadesc_fbhigh_dma);
615         DPRINTK("fbi->dmadesc_palette_dma = 0x%x\n", fbi->dmadesc_palette_dma);
616
617         DPRINTK("fbi->dmadesc_fblow_cpu->fdadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fdadr);
618         DPRINTK("fbi->dmadesc_fbhigh_cpu->fdadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fdadr);
619         DPRINTK("fbi->dmadesc_palette_cpu->fdadr = 0x%x\n", fbi->dmadesc_palette_cpu->fdadr);
620
621         DPRINTK("fbi->dmadesc_fblow_cpu->fsadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fsadr);
622         DPRINTK("fbi->dmadesc_fbhigh_cpu->fsadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fsadr);
623         DPRINTK("fbi->dmadesc_palette_cpu->fsadr = 0x%x\n", fbi->dmadesc_palette_cpu->fsadr);
624
625         DPRINTK("fbi->dmadesc_fblow_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fblow_cpu->ldcmd);
626         DPRINTK("fbi->dmadesc_fbhigh_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fbhigh_cpu->ldcmd);
627         DPRINTK("fbi->dmadesc_palette_cpu->ldcmd = 0x%x\n", fbi->dmadesc_palette_cpu->ldcmd);
628 #endif
629
630         fbi->reg_lccr0 = new_regs.lccr0;
631         fbi->reg_lccr1 = new_regs.lccr1;
632         fbi->reg_lccr2 = new_regs.lccr2;
633         fbi->reg_lccr3 = new_regs.lccr3;
634         local_irq_restore(flags);
635
636         /*
637          * Only update the registers if the controller is enabled
638          * and something has changed.
639          */
640         if ((LCCR0  != fbi->reg_lccr0) || (LCCR1  != fbi->reg_lccr1) ||
641             (LCCR2  != fbi->reg_lccr2) || (LCCR3  != fbi->reg_lccr3) ||
642             (FDADR0 != fbi->fdadr0)    || (FDADR1 != fbi->fdadr1))
643                 pxafb_schedule_work(fbi, C_REENABLE);
644
645         return 0;
646 }
647
648 /*
649  * NOTE!  The following functions are purely helpers for set_ctrlr_state.
650  * Do not call them directly; set_ctrlr_state does the correct serialisation
651  * to ensure that things happen in the right way 100% of time time.
652  *      -- rmk
653  */
654 static inline void __pxafb_backlight_power(struct pxafb_info *fbi, int on)
655 {
656         DPRINTK("backlight o%s\n", on ? "n" : "ff");
657
658         if (pxafb_backlight_power)
659                 pxafb_backlight_power(on);
660 }
661
662 static inline void __pxafb_lcd_power(struct pxafb_info *fbi, int on)
663 {
664         DPRINTK("LCD power o%s\n", on ? "n" : "ff");
665
666         if (pxafb_lcd_power)
667                 pxafb_lcd_power(on);
668 }
669
670 static void pxafb_setup_gpio(struct pxafb_info *fbi)
671 {
672         int gpio, ldd_bits;
673         unsigned int lccr0 = fbi->lccr0;
674
675         /*
676          * setup is based on type of panel supported
677         */
678
679         /* 4 bit interface */
680         if ((lccr0 & LCCR0_CMS) == LCCR0_Mono &&
681             (lccr0 & LCCR0_SDS) == LCCR0_Sngl &&
682             (lccr0 & LCCR0_DPD) == LCCR0_4PixMono)
683                 ldd_bits = 4;
684
685         /* 8 bit interface */
686         else if (((lccr0 & LCCR0_CMS) == LCCR0_Mono &&
687                   ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_DPD) == LCCR0_8PixMono)) ||
688                  ((lccr0 & LCCR0_CMS) == LCCR0_Color &&
689                   (lccr0 & LCCR0_PAS) == LCCR0_Pas && (lccr0 & LCCR0_SDS) == LCCR0_Sngl))
690                 ldd_bits = 8;
691
692         /* 16 bit interface */
693         else if ((lccr0 & LCCR0_CMS) == LCCR0_Color &&
694                  ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_PAS) == LCCR0_Act))
695                 ldd_bits = 16;
696
697         else {
698                 printk(KERN_ERR "pxafb_setup_gpio: unable to determine bits per pixel\n");
699                 return;
700         }
701
702         for (gpio = 58; ldd_bits; gpio++, ldd_bits--)
703                 pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT);
704         pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
705         pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
706         pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
707         pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
708 }
709
710 static void pxafb_enable_controller(struct pxafb_info *fbi)
711 {
712         DPRINTK("Enabling LCD controller\n");
713         DPRINTK("fdadr0 0x%08x\n", (unsigned int) fbi->fdadr0);
714         DPRINTK("fdadr1 0x%08x\n", (unsigned int) fbi->fdadr1);
715         DPRINTK("reg_lccr0 0x%08x\n", (unsigned int) fbi->reg_lccr0);
716         DPRINTK("reg_lccr1 0x%08x\n", (unsigned int) fbi->reg_lccr1);
717         DPRINTK("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2);
718         DPRINTK("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
719
720         /* Sequence from 11.7.10 */
721         LCCR3 = fbi->reg_lccr3;
722         LCCR2 = fbi->reg_lccr2;
723         LCCR1 = fbi->reg_lccr1;
724         LCCR0 = fbi->reg_lccr0 & ~LCCR0_ENB;
725
726         FDADR0 = fbi->fdadr0;
727         FDADR1 = fbi->fdadr1;
728         LCCR0 |= LCCR0_ENB;
729
730         DPRINTK("FDADR0 0x%08x\n", (unsigned int) FDADR0);
731         DPRINTK("FDADR1 0x%08x\n", (unsigned int) FDADR1);
732         DPRINTK("LCCR0 0x%08x\n", (unsigned int) LCCR0);
733         DPRINTK("LCCR1 0x%08x\n", (unsigned int) LCCR1);
734         DPRINTK("LCCR2 0x%08x\n", (unsigned int) LCCR2);
735         DPRINTK("LCCR3 0x%08x\n", (unsigned int) LCCR3);
736 }
737
738 static void pxafb_disable_controller(struct pxafb_info *fbi)
739 {
740         DECLARE_WAITQUEUE(wait, current);
741
742         DPRINTK("Disabling LCD controller\n");
743
744         set_current_state(TASK_UNINTERRUPTIBLE);
745         add_wait_queue(&fbi->ctrlr_wait, &wait);
746
747         LCSR = 0xffffffff;      /* Clear LCD Status Register */
748         LCCR0 &= ~LCCR0_LDM;    /* Enable LCD Disable Done Interrupt */
749         LCCR0 |= LCCR0_DIS;     /* Disable LCD Controller */
750
751         schedule_timeout(20 * HZ / 1000);
752         remove_wait_queue(&fbi->ctrlr_wait, &wait);
753 }
754
755 /*
756  *  pxafb_handle_irq: Handle 'LCD DONE' interrupts.
757  */
758 static irqreturn_t pxafb_handle_irq(int irq, void *dev_id, struct pt_regs *regs)
759 {
760         struct pxafb_info *fbi = dev_id;
761         unsigned int lcsr = LCSR;
762
763         if (lcsr & LCSR_LDD) {
764                 LCCR0 |= LCCR0_LDM;
765                 wake_up(&fbi->ctrlr_wait);
766         }
767
768         LCSR = lcsr;
769         return IRQ_HANDLED;
770 }
771
772 /*
773  * This function must be called from task context only, since it will
774  * sleep when disabling the LCD controller, or if we get two contending
775  * processes trying to alter state.
776  */
777 static void set_ctrlr_state(struct pxafb_info *fbi, u_int state)
778 {
779         u_int old_state;
780
781         down(&fbi->ctrlr_sem);
782
783         old_state = fbi->state;
784
785         /*
786          * Hack around fbcon initialisation.
787          */
788         if (old_state == C_STARTUP && state == C_REENABLE)
789                 state = C_ENABLE;
790
791         switch (state) {
792         case C_DISABLE_CLKCHANGE:
793                 /*
794                  * Disable controller for clock change.  If the
795                  * controller is already disabled, then do nothing.
796                  */
797                 if (old_state != C_DISABLE && old_state != C_DISABLE_PM) {
798                         fbi->state = state;
799                         //TODO __pxafb_lcd_power(fbi, 0);
800                         pxafb_disable_controller(fbi);
801                 }
802                 break;
803
804         case C_DISABLE_PM:
805         case C_DISABLE:
806                 /*
807                  * Disable controller
808                  */
809                 if (old_state != C_DISABLE) {
810                         fbi->state = state;
811                         __pxafb_backlight_power(fbi, 0);
812                         __pxafb_lcd_power(fbi, 0);
813                         if (old_state != C_DISABLE_CLKCHANGE)
814                                 pxafb_disable_controller(fbi);
815                 }
816                 break;
817
818         case C_ENABLE_CLKCHANGE:
819                 /*
820                  * Enable the controller after clock change.  Only
821                  * do this if we were disabled for the clock change.
822                  */
823                 if (old_state == C_DISABLE_CLKCHANGE) {
824                         fbi->state = C_ENABLE;
825                         pxafb_enable_controller(fbi);
826                         //TODO __pxafb_lcd_power(fbi, 1);
827                 }
828                 break;
829
830         case C_REENABLE:
831                 /*
832                  * Re-enable the controller only if it was already
833                  * enabled.  This is so we reprogram the control
834                  * registers.
835                  */
836                 if (old_state == C_ENABLE) {
837                         pxafb_disable_controller(fbi);
838                         pxafb_setup_gpio(fbi);
839                         pxafb_enable_controller(fbi);
840                 }
841                 break;
842
843         case C_ENABLE_PM:
844                 /*
845                  * Re-enable the controller after PM.  This is not
846                  * perfect - think about the case where we were doing
847                  * a clock change, and we suspended half-way through.
848                  */
849                 if (old_state != C_DISABLE_PM)
850                         break;
851                 /* fall through */
852
853         case C_ENABLE:
854                 /*
855                  * Power up the LCD screen, enable controller, and
856                  * turn on the backlight.
857                  */
858                 if (old_state != C_ENABLE) {
859                         fbi->state = C_ENABLE;
860                         pxafb_setup_gpio(fbi);
861                         pxafb_enable_controller(fbi);
862                         __pxafb_lcd_power(fbi, 1);
863                         __pxafb_backlight_power(fbi, 1);
864                 }
865                 break;
866         }
867         up(&fbi->ctrlr_sem);
868 }
869
870 /*
871  * Our LCD controller task (which is called when we blank or unblank)
872  * via keventd.
873  */
874 static void pxafb_task(void *dummy)
875 {
876         struct pxafb_info *fbi = dummy;
877         u_int state = xchg(&fbi->task_state, -1);
878
879         set_ctrlr_state(fbi, state);
880 }
881
882 #ifdef CONFIG_CPU_FREQ
883 /*
884  * CPU clock speed change handler.  We need to adjust the LCD timing
885  * parameters when the CPU clock is adjusted by the power management
886  * subsystem.
887  *
888  * TODO: Determine why f->new != 10*get_lclk_frequency_10khz()
889  */
890 static int
891 pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data)
892 {
893         struct pxafb_info *fbi = TO_INF(nb, freq_transition);
894         //TODO struct cpufreq_freqs *f = data;
895         u_int pcd;
896
897         switch (val) {
898         case CPUFREQ_PRECHANGE:
899                 set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
900                 break;
901
902         case CPUFREQ_POSTCHANGE:
903                 pcd = get_pcd(fbi->fb.var.pixclock);
904                 fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
905                 set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
906                 break;
907         }
908         return 0;
909 }
910
911 static int
912 pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data)
913 {
914         struct pxafb_info *fbi = TO_INF(nb, freq_policy);
915         struct fb_var_screeninfo *var = &fbi->fb.var;
916         struct cpufreq_policy *policy = data;
917
918         switch (val) {
919         case CPUFREQ_ADJUST:
920         case CPUFREQ_INCOMPATIBLE:
921                 printk(KERN_DEBUG "min dma period: %d ps, "
922                         "new clock %d kHz\n", pxafb_display_dma_period(var),
923                         policy->max);
924                 // TODO: fill in min/max values
925                 break;
926 #if 0
927         case CPUFREQ_NOTIFY:
928                 printk(KERN_ERR "%s: got CPUFREQ_NOTIFY\n", __FUNCTION__);
929                 do {} while(0);
930                 /* todo: panic if min/max values aren't fulfilled
931                  * [can't really happen unless there's a bug in the
932                  * CPU policy verification process *
933                  */
934                 break;
935 #endif
936         }
937         return 0;
938 }
939 #endif
940
941 #ifdef CONFIG_PM
942 /*
943  * Power management hooks.  Note that we won't be called from IRQ context,
944  * unlike the blank functions above, so we may sleep.
945  */
946 static int pxafb_suspend(struct device *dev, pm_message_t state, u32 level)
947 {
948         struct pxafb_info *fbi = dev_get_drvdata(dev);
949
950         if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN)
951                 set_ctrlr_state(fbi, C_DISABLE_PM);
952         return 0;
953 }
954
955 static int pxafb_resume(struct device *dev, u32 level)
956 {
957         struct pxafb_info *fbi = dev_get_drvdata(dev);
958
959         if (level == RESUME_ENABLE)
960                 set_ctrlr_state(fbi, C_ENABLE_PM);
961         return 0;
962 }
963 #else
964 #define pxafb_suspend   NULL
965 #define pxafb_resume    NULL
966 #endif
967
968 /*
969  * pxafb_map_video_memory():
970  *      Allocates the DRAM memory for the frame buffer.  This buffer is
971  *      remapped into a non-cached, non-buffered, memory region to
972  *      allow palette and pixel writes to occur without flushing the
973  *      cache.  Once this area is remapped, all virtual memory
974  *      access to the video memory should occur at the new region.
975  */
976 static int __init pxafb_map_video_memory(struct pxafb_info *fbi)
977 {
978         u_long palette_mem_size;
979
980         /*
981          * We reserve one page for the palette, plus the size
982          * of the framebuffer.
983          */
984         fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE);
985         fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size,
986                                               &fbi->map_dma, GFP_KERNEL);
987
988         if (fbi->map_cpu) {
989                 /* prevent initial garbage on screen */
990                 memset(fbi->map_cpu, 0, fbi->map_size);
991                 fbi->fb.screen_base = fbi->map_cpu + PAGE_SIZE;
992                 fbi->screen_dma = fbi->map_dma + PAGE_SIZE;
993                 /*
994                  * FIXME: this is actually the wrong thing to place in
995                  * smem_start.  But fbdev suffers from the problem that
996                  * it needs an API which doesn't exist (in this case,
997                  * dma_writecombine_mmap)
998                  */
999                 fbi->fb.fix.smem_start = fbi->screen_dma;
1000
1001                 fbi->palette_size = fbi->fb.var.bits_per_pixel == 8 ? 256 : 16;
1002
1003                 palette_mem_size = fbi->palette_size * sizeof(u16);
1004                 DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
1005
1006                 fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
1007                 fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
1008         }
1009
1010         return fbi->map_cpu ? 0 : -ENOMEM;
1011 }
1012
1013 static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev)
1014 {
1015         struct pxafb_info *fbi;
1016         void *addr;
1017         struct pxafb_mach_info *inf = dev->platform_data;
1018
1019         /* Alloc the pxafb_info and pseudo_palette in one step */
1020         fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL);
1021         if (!fbi)
1022                 return NULL;
1023
1024         memset(fbi, 0, sizeof(struct pxafb_info));
1025         fbi->dev = dev;
1026
1027         strcpy(fbi->fb.fix.id, PXA_NAME);
1028
1029         fbi->fb.fix.type        = FB_TYPE_PACKED_PIXELS;
1030         fbi->fb.fix.type_aux    = 0;
1031         fbi->fb.fix.xpanstep    = 0;
1032         fbi->fb.fix.ypanstep    = 0;
1033         fbi->fb.fix.ywrapstep   = 0;
1034         fbi->fb.fix.accel       = FB_ACCEL_NONE;
1035
1036         fbi->fb.var.nonstd      = 0;
1037         fbi->fb.var.activate    = FB_ACTIVATE_NOW;
1038         fbi->fb.var.height      = -1;
1039         fbi->fb.var.width       = -1;
1040         fbi->fb.var.accel_flags = 0;
1041         fbi->fb.var.vmode       = FB_VMODE_NONINTERLACED;
1042
1043         fbi->fb.fbops           = &pxafb_ops;
1044         fbi->fb.flags           = FBINFO_DEFAULT;
1045         fbi->fb.node            = -1;
1046
1047         addr = fbi;
1048         addr = addr + sizeof(struct pxafb_info);
1049         fbi->fb.pseudo_palette  = addr;
1050
1051         fbi->max_xres                   = inf->xres;
1052         fbi->fb.var.xres                = inf->xres;
1053         fbi->fb.var.xres_virtual        = inf->xres;
1054         fbi->max_yres                   = inf->yres;
1055         fbi->fb.var.yres                = inf->yres;
1056         fbi->fb.var.yres_virtual        = inf->yres;
1057         fbi->max_bpp                    = inf->bpp;
1058         fbi->fb.var.bits_per_pixel      = inf->bpp;
1059         fbi->fb.var.pixclock            = inf->pixclock;
1060         fbi->fb.var.hsync_len           = inf->hsync_len;
1061         fbi->fb.var.left_margin         = inf->left_margin;
1062         fbi->fb.var.right_margin        = inf->right_margin;
1063         fbi->fb.var.vsync_len           = inf->vsync_len;
1064         fbi->fb.var.upper_margin        = inf->upper_margin;
1065         fbi->fb.var.lower_margin        = inf->lower_margin;
1066         fbi->fb.var.sync                = inf->sync;
1067         fbi->fb.var.grayscale           = inf->cmap_greyscale;
1068         fbi->cmap_inverse               = inf->cmap_inverse;
1069         fbi->cmap_static                = inf->cmap_static;
1070         fbi->lccr0                      = inf->lccr0;
1071         fbi->lccr3                      = inf->lccr3;
1072         fbi->state                      = C_STARTUP;
1073         fbi->task_state                 = (u_char)-1;
1074         fbi->fb.fix.smem_len            = fbi->max_xres * fbi->max_yres *
1075                                           fbi->max_bpp / 8;
1076
1077         init_waitqueue_head(&fbi->ctrlr_wait);
1078         INIT_WORK(&fbi->task, pxafb_task, fbi);
1079         init_MUTEX(&fbi->ctrlr_sem);
1080
1081         return fbi;
1082 }
1083
1084 #ifdef CONFIG_FB_PXA_PARAMETERS
1085 static int __init pxafb_parse_options(struct device *dev, char *options)
1086 {
1087         struct pxafb_mach_info *inf = dev->platform_data;
1088         char *this_opt;
1089
1090         if (!options || !*options)
1091                 return 0;
1092
1093         dev_dbg(dev, "options are \"%s\"\n", options ? options : "null");
1094
1095         /* could be made table driven or similar?... */
1096         while ((this_opt = strsep(&options, ",")) != NULL) {
1097                 if (!strncmp(this_opt, "mode:", 5)) {
1098                         const char *name = this_opt+5;
1099                         unsigned int namelen = strlen(name);
1100                         int res_specified = 0, bpp_specified = 0;
1101                         unsigned int xres = 0, yres = 0, bpp = 0;
1102                         int yres_specified = 0;
1103                         int i;
1104                         for (i = namelen-1; i >= 0; i--) {
1105                                 switch (name[i]) {
1106                                 case '-':
1107                                         namelen = i;
1108                                         if (!bpp_specified && !yres_specified) {
1109                                                 bpp = simple_strtoul(&name[i+1], NULL, 0);
1110                                                 bpp_specified = 1;
1111                                         } else
1112                                                 goto done;
1113                                         break;
1114                                 case 'x':
1115                                         if (!yres_specified) {
1116                                                 yres = simple_strtoul(&name[i+1], NULL, 0);
1117                                                 yres_specified = 1;
1118                                         } else
1119                                                 goto done;
1120                                         break;
1121                                 case '0'...'9':
1122                                         break;
1123                                 default:
1124                                         goto done;
1125                                 }
1126                         }
1127                         if (i < 0 && yres_specified) {
1128                                 xres = simple_strtoul(name, NULL, 0);
1129                                 res_specified = 1;
1130                         }
1131                 done:
1132                         if (res_specified) {
1133                                 dev_info(dev, "overriding resolution: %dx%d\n", xres, yres);
1134                                 inf->xres = xres; inf->yres = yres;
1135                         }
1136                         if (bpp_specified)
1137                                 switch (bpp) {
1138                                 case 1:
1139                                 case 2:
1140                                 case 4:
1141                                 case 8:
1142                                 case 16:
1143                                         inf->bpp = bpp;
1144                                         dev_info(dev, "overriding bit depth: %d\n", bpp);
1145                                         break;
1146                                 default:
1147                                         dev_err(dev, "Depth %d is not valid\n", bpp);
1148                                 }
1149                 } else if (!strncmp(this_opt, "pixclock:", 9)) {
1150                         inf->pixclock = simple_strtoul(this_opt+9, NULL, 0);
1151                         dev_info(dev, "override pixclock: %ld\n", inf->pixclock);
1152                 } else if (!strncmp(this_opt, "left:", 5)) {
1153                         inf->left_margin = simple_strtoul(this_opt+5, NULL, 0);
1154                         dev_info(dev, "override left: %u\n", inf->left_margin);
1155                 } else if (!strncmp(this_opt, "right:", 6)) {
1156                         inf->right_margin = simple_strtoul(this_opt+6, NULL, 0);
1157                         dev_info(dev, "override right: %u\n", inf->right_margin);
1158                 } else if (!strncmp(this_opt, "upper:", 6)) {
1159                         inf->upper_margin = simple_strtoul(this_opt+6, NULL, 0);
1160                         dev_info(dev, "override upper: %u\n", inf->upper_margin);
1161                 } else if (!strncmp(this_opt, "lower:", 6)) {
1162                         inf->lower_margin = simple_strtoul(this_opt+6, NULL, 0);
1163                         dev_info(dev, "override lower: %u\n", inf->lower_margin);
1164                 } else if (!strncmp(this_opt, "hsynclen:", 9)) {
1165                         inf->hsync_len = simple_strtoul(this_opt+9, NULL, 0);
1166                         dev_info(dev, "override hsynclen: %u\n", inf->hsync_len);
1167                 } else if (!strncmp(this_opt, "vsynclen:", 9)) {
1168                         inf->vsync_len = simple_strtoul(this_opt+9, NULL, 0);
1169                         dev_info(dev, "override vsynclen: %u\n", inf->vsync_len);
1170                 } else if (!strncmp(this_opt, "hsync:", 6)) {
1171                         if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
1172                                 dev_info(dev, "override hsync: Active Low\n");
1173                                 inf->sync &= ~FB_SYNC_HOR_HIGH_ACT;
1174                         } else {
1175                                 dev_info(dev, "override hsync: Active High\n");
1176                                 inf->sync |= FB_SYNC_HOR_HIGH_ACT;
1177                         }
1178                 } else if (!strncmp(this_opt, "vsync:", 6)) {
1179                         if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
1180                                 dev_info(dev, "override vsync: Active Low\n");
1181                                 inf->sync &= ~FB_SYNC_VERT_HIGH_ACT;
1182                         } else {
1183                                 dev_info(dev, "override vsync: Active High\n");
1184                                 inf->sync |= FB_SYNC_VERT_HIGH_ACT;
1185                         }
1186                 } else if (!strncmp(this_opt, "dpc:", 4)) {
1187                         if (simple_strtoul(this_opt+4, NULL, 0) == 0) {
1188                                 dev_info(dev, "override double pixel clock: false\n");
1189                                 inf->lccr3 &= ~LCCR3_DPC;
1190                         } else {
1191                                 dev_info(dev, "override double pixel clock: true\n");
1192                                 inf->lccr3 |= LCCR3_DPC;
1193                         }
1194                 } else if (!strncmp(this_opt, "outputen:", 9)) {
1195                         if (simple_strtoul(this_opt+9, NULL, 0) == 0) {
1196                                 dev_info(dev, "override output enable: active low\n");
1197                                 inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnL;
1198                         } else {
1199                                 dev_info(dev, "override output enable: active high\n");
1200                                 inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnH;
1201                         }
1202                 } else if (!strncmp(this_opt, "pixclockpol:", 12)) {
1203                         if (simple_strtoul(this_opt+12, NULL, 0) == 0) {
1204                                 dev_info(dev, "override pixel clock polarity: falling edge\n");
1205                                 inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixFlEdg;
1206                         } else {
1207                                 dev_info(dev, "override pixel clock polarity: rising edge\n");
1208                                 inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixRsEdg;
1209                         }
1210                 } else if (!strncmp(this_opt, "color", 5)) {
1211                         inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Color;
1212                 } else if (!strncmp(this_opt, "mono", 4)) {
1213                         inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Mono;
1214                 } else if (!strncmp(this_opt, "active", 6)) {
1215                         inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Act;
1216                 } else if (!strncmp(this_opt, "passive", 7)) {
1217                         inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Pas;
1218                 } else if (!strncmp(this_opt, "single", 6)) {
1219                         inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Sngl;
1220                 } else if (!strncmp(this_opt, "dual", 4)) {
1221                         inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Dual;
1222                 } else if (!strncmp(this_opt, "4pix", 4)) {
1223                         inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_4PixMono;
1224                 } else if (!strncmp(this_opt, "8pix", 4)) {
1225                         inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_8PixMono;
1226                 } else {
1227                         dev_err(dev, "unknown option: %s\n", this_opt);
1228                         return -EINVAL;
1229                 }
1230         }
1231         return 0;
1232
1233 }
1234 #endif
1235
1236 int __init pxafb_probe(struct device *dev)
1237 {
1238         struct pxafb_info *fbi;
1239         struct pxafb_mach_info *inf;
1240         int ret;
1241
1242         dev_dbg(dev, "pxafb_probe\n");
1243
1244         inf = dev->platform_data;
1245         ret = -ENOMEM;
1246         fbi = NULL;
1247         if (!inf)
1248                 goto failed;
1249
1250 #ifdef CONFIG_FB_PXA_PARAMETERS
1251         ret = pxafb_parse_options(dev, g_options);
1252         if (ret < 0)
1253                 goto failed;
1254 #endif
1255
1256 #ifdef DEBUG_VAR
1257         /* Check for various illegal bit-combinations. Currently only
1258          * a warning is given. */
1259
1260         if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
1261                 dev_warn(dev, "machine LCCR0 setting contains illegal bits: %08x\n",
1262                         inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
1263         if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
1264                 dev_warn(dev, "machine LCCR3 setting contains illegal bits: %08x\n",
1265                         inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
1266         if (inf->lccr0 & LCCR0_DPD &&
1267             ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
1268              (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
1269              (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
1270                 dev_warn(dev, "Double Pixel Data (DPD) mode is only valid in passive mono"
1271                          " single panel mode\n");
1272         if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
1273             (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
1274                 dev_warn(dev, "Dual panel only valid in passive mode\n");
1275         if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
1276              (inf->upper_margin || inf->lower_margin))
1277                 dev_warn(dev, "Upper and lower margins must be 0 in passive mode\n");
1278 #endif
1279
1280         dev_dbg(dev, "got a %dx%dx%d LCD\n",inf->xres, inf->yres, inf->bpp);
1281         if (inf->xres == 0 || inf->yres == 0 || inf->bpp == 0) {
1282                 dev_err(dev, "Invalid resolution or bit depth\n");
1283                 ret = -EINVAL;
1284                 goto failed;
1285         }
1286         pxafb_backlight_power = inf->pxafb_backlight_power;
1287         pxafb_lcd_power = inf->pxafb_lcd_power;
1288         fbi = pxafb_init_fbinfo(dev);
1289         if (!fbi) {
1290                 dev_err(dev, "Failed to initialize framebuffer device\n");
1291                 ret = -ENOMEM; // only reason for pxafb_init_fbinfo to fail is kmalloc
1292                 goto failed;
1293         }
1294
1295         /* Initialize video memory */
1296         ret = pxafb_map_video_memory(fbi);
1297         if (ret) {
1298                 dev_err(dev, "Failed to allocate video RAM: %d\n", ret);
1299                 ret = -ENOMEM;
1300                 goto failed;
1301         }
1302         /* enable LCD controller clock */
1303         pxa_set_cken(CKEN16_LCD, 1);
1304
1305         ret = request_irq(IRQ_LCD, pxafb_handle_irq, SA_INTERRUPT, "LCD", fbi);
1306         if (ret) {
1307                 dev_err(dev, "request_irq failed: %d\n", ret);
1308                 ret = -EBUSY;
1309                 goto failed;
1310         }
1311
1312         /*
1313          * This makes sure that our colour bitfield
1314          * descriptors are correctly initialised.
1315          */
1316         pxafb_check_var(&fbi->fb.var, &fbi->fb);
1317         pxafb_set_par(&fbi->fb);
1318
1319         dev_set_drvdata(dev, fbi);
1320
1321         ret = register_framebuffer(&fbi->fb);
1322         if (ret < 0) {
1323                 dev_err(dev, "Failed to register framebuffer device: %d\n", ret);
1324                 goto failed;
1325         }
1326
1327 #ifdef CONFIG_PM
1328         // TODO
1329 #endif
1330
1331 #ifdef CONFIG_CPU_FREQ
1332         fbi->freq_transition.notifier_call = pxafb_freq_transition;
1333         fbi->freq_policy.notifier_call = pxafb_freq_policy;
1334         cpufreq_register_notifier(&fbi->freq_transition, CPUFREQ_TRANSITION_NOTIFIER);
1335         cpufreq_register_notifier(&fbi->freq_policy, CPUFREQ_POLICY_NOTIFIER);
1336 #endif
1337
1338         /*
1339          * Ok, now enable the LCD controller
1340          */
1341         set_ctrlr_state(fbi, C_ENABLE);
1342
1343         return 0;
1344
1345 failed:
1346         dev_set_drvdata(dev, NULL);
1347         kfree(fbi);
1348         return ret;
1349 }
1350
1351 static struct device_driver pxafb_driver = {
1352         .name           = "pxa2xx-fb",
1353         .bus            = &platform_bus_type,
1354         .probe          = pxafb_probe,
1355 #ifdef CONFIG_PM
1356         .suspend        = pxafb_suspend,
1357         .resume         = pxafb_resume,
1358 #endif
1359 };
1360
1361 #ifndef MODULE
1362 int __devinit pxafb_setup(char *options)
1363 {
1364 # ifdef CONFIG_FB_PXA_PARAMETERS
1365         strlcpy(g_options, options, sizeof(g_options));
1366 # endif
1367         return 0;
1368 }
1369 #else
1370 # ifdef CONFIG_FB_PXA_PARAMETERS
1371 module_param_string(options, g_options, sizeof(g_options), 0);
1372 MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
1373 # endif
1374 #endif
1375
1376 int __devinit pxafb_init(void)
1377 {
1378 #ifndef MODULE
1379         char *option = NULL;
1380
1381         if (fb_get_options("pxafb", &option))
1382                 return -ENODEV;
1383         pxafb_setup(option);
1384 #endif
1385         return driver_register(&pxafb_driver);
1386 }
1387
1388 module_init(pxafb_init);
1389
1390 MODULE_DESCRIPTION("loadable framebuffer driver for PXA");
1391 MODULE_LICENSE("GPL");