git.oblomov.eu Git - linux-2.6/blob - drivers/media/video/cx18/cx18-firmware.c

   1 /*
   2  *  cx18 firmware functions
   3  *
   4  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify
   7  *  it under the terms of the GNU General Public License as published by
   8  *  the Free Software Foundation; either version 2 of the License, or
   9  *  (at your option) any later version.
  10  *
  11  *  This program is distributed in the hope that it will be useful,
  12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  *  GNU General Public License for more details.
  15  *
  16  *  You should have received a copy of the GNU General Public License
  17  *  along with this program; if not, write to the Free Software
  18  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
  19  *  02111-1307  USA
  20  */
  21
  22 #include "cx18-driver.h"
  23 #include "cx18-scb.h"
  24 #include "cx18-irq.h"
  25 #include "cx18-firmware.h"
  26 #include "cx18-cards.h"
  27 #include <linux/firmware.h>
  28
  29 #define CX18_PROC_SOFT_RESET            0xc70010
  30 #define CX18_DDR_SOFT_RESET             0xc70014
  31 #define CX18_CLOCK_SELECT1              0xc71000
  32 #define CX18_CLOCK_SELECT2              0xc71004
  33 #define CX18_HALF_CLOCK_SELECT1         0xc71008
  34 #define CX18_HALF_CLOCK_SELECT2         0xc7100C
  35 #define CX18_CLOCK_POLARITY1            0xc71010
  36 #define CX18_CLOCK_POLARITY2            0xc71014
  37 #define CX18_ADD_DELAY_ENABLE1          0xc71018
  38 #define CX18_ADD_DELAY_ENABLE2          0xc7101C
  39 #define CX18_CLOCK_ENABLE1              0xc71020
  40 #define CX18_CLOCK_ENABLE2              0xc71024
  41
  42 #define CX18_REG_BUS_TIMEOUT_EN         0xc72024
  43
  44 #define CX18_FAST_CLOCK_PLL_INT         0xc78000
  45 #define CX18_FAST_CLOCK_PLL_FRAC        0xc78004
  46 #define CX18_FAST_CLOCK_PLL_POST        0xc78008
  47 #define CX18_FAST_CLOCK_PLL_PRESCALE    0xc7800C
  48 #define CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH 0xc78010
  49
  50 #define CX18_SLOW_CLOCK_PLL_INT         0xc78014
  51 #define CX18_SLOW_CLOCK_PLL_FRAC        0xc78018
  52 #define CX18_SLOW_CLOCK_PLL_POST        0xc7801C
  53 #define CX18_MPEG_CLOCK_PLL_INT         0xc78040
  54 #define CX18_MPEG_CLOCK_PLL_FRAC        0xc78044
  55 #define CX18_MPEG_CLOCK_PLL_POST        0xc78048
  56 #define CX18_PLL_POWER_DOWN             0xc78088
  57 #define CX18_SW1_INT_STATUS             0xc73104
  58 #define CX18_SW1_INT_ENABLE_PCI         0xc7311C
  59 #define CX18_SW2_INT_SET                0xc73140
  60 #define CX18_SW2_INT_STATUS             0xc73144
  61 #define CX18_ADEC_CONTROL               0xc78120
  62
  63 #define CX18_DDR_REQUEST_ENABLE         0xc80000
  64 #define CX18_DDR_CHIP_CONFIG            0xc80004
  65 #define CX18_DDR_REFRESH                0xc80008
  66 #define CX18_DDR_TIMING1                0xc8000C
  67 #define CX18_DDR_TIMING2                0xc80010
  68 #define CX18_DDR_POWER_REG              0xc8001C
  69
  70 #define CX18_DDR_TUNE_LANE              0xc80048
  71 #define CX18_DDR_INITIAL_EMRS           0xc80054
  72 #define CX18_DDR_MB_PER_ROW_7           0xc8009C
  73 #define CX18_DDR_BASE_63_ADDR           0xc804FC
  74
  75 #define CX18_WMB_CLIENT02               0xc90108
  76 #define CX18_WMB_CLIENT05               0xc90114
  77 #define CX18_WMB_CLIENT06               0xc90118
  78 #define CX18_WMB_CLIENT07               0xc9011C
  79 #define CX18_WMB_CLIENT08               0xc90120
  80 #define CX18_WMB_CLIENT09               0xc90124
  81 #define CX18_WMB_CLIENT10               0xc90128
  82 #define CX18_WMB_CLIENT11               0xc9012C
  83 #define CX18_WMB_CLIENT12               0xc90130
  84 #define CX18_WMB_CLIENT13               0xc90134
  85 #define CX18_WMB_CLIENT14               0xc90138
  86
  87 #define CX18_DSP0_INTERRUPT_MASK        0xd0004C
  88
  89 /* Encoder/decoder firmware sizes */
  90 #define CX18_FW_CPU_SIZE                (174716)
  91 #define CX18_FW_APU_SIZE                (141200)
  92
  93 #define APU_ROM_SYNC1 0x6D676553 /* "mgeS" */
  94 #define APU_ROM_SYNC2 0x72646548 /* "rdeH" */
  95
  96 struct cx18_apu_rom_seghdr {
  97         u32 sync1;
  98         u32 sync2;
  99         u32 addr;
 100         u32 size;
 101 };
 102
 103 static int load_cpu_fw_direct(const char *fn, u8 __iomem *mem, struct cx18 *cx, long size)
 104 {
 105         const struct firmware *fw = NULL;
 106         int retries = 3;
 107         int i, j;
 108         u32 __iomem *dst = (u32 __iomem *)mem;
 109         const u32 *src;
 110
 111 retry:
 112         if (!retries || request_firmware(&fw, fn, &cx->dev->dev)) {
 113                 CX18_ERR("Unable to open firmware %s (must be %ld bytes)\n",
 114                                 fn, size);
 115                 CX18_ERR("Did you put the firmware in the hotplug firmware directory?\n");
 116                 return -ENOMEM;
 117         }
 118
 119         src = (const u32 *)fw->data;
 120
 121         if (fw->size != size) {
 122                 /* Due to race conditions in firmware loading (esp. with
 123                    udev <0.95) the wrong file was sometimes loaded. So we check
 124                    filesizes to see if at least the right-sized file was
 125                    loaded. If not, then we retry. */
 126                 CX18_INFO("retry: file loaded was not %s (expected size %ld, got %zd)\n",
 127                                 fn, size, fw->size);
 128                 release_firmware(fw);
 129                 retries--;
 130                 goto retry;
 131         }
 132         for (i = 0; i < fw->size; i += 4096) {
 133                 setup_page(i);
 134                 for (j = i; j < fw->size && j < i + 4096; j += 4) {
 135                         /* no need for endianness conversion on the ppc */
 136                         __raw_writel(*src, dst);
 137                         if (__raw_readl(dst) != *src) {
 138                                 CX18_ERR("Mismatch at offset %x\n", i);
 139                                 release_firmware(fw);
 140                                 return -EIO;
 141                         }
 142                         dst++;
 143                         src++;
 144                 }
 145         }
 146         if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags))
 147                 CX18_INFO("loaded %s firmware (%zd bytes)\n", fn, fw->size);
 148         release_firmware(fw);
 149         return size;
 150 }
 151
 152 static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx, long size)
 153 {
 154         const struct firmware *fw = NULL;
 155         int retries = 3;
 156         int i, j;
 157         const u32 *src;
 158         struct cx18_apu_rom_seghdr seghdr;
 159         const u8 *vers;
 160         u32 offset = 0;
 161         u32 apu_version = 0;
 162         int sz;
 163
 164 retry:
 165         if (!retries || request_firmware(&fw, fn, &cx->dev->dev)) {
 166                 CX18_ERR("unable to open firmware %s (must be %ld bytes)\n",
 167                                 fn, size);
 168                 CX18_ERR("did you put the firmware in the hotplug firmware directory?\n");
 169                 return -ENOMEM;
 170         }
 171
 172         src = (const u32 *)fw->data;
 173         vers = fw->data + sizeof(seghdr);
 174         sz = fw->size;
 175
 176         if (fw->size != size) {
 177                 /* Due to race conditions in firmware loading (esp. with
 178                    udev <0.95) the wrong file was sometimes loaded. So we check
 179                    filesizes to see if at least the right-sized file was
 180                    loaded. If not, then we retry. */
 181                 CX18_INFO("retry: file loaded was not %s (expected size %ld, got %zd)\n",
 182                                fn, size, fw->size);
 183                 release_firmware(fw);
 184                 retries--;
 185                 goto retry;
 186         }
 187         apu_version = (vers[0] << 24) | (vers[4] << 16) | vers[32];
 188         while (offset + sizeof(seghdr) < size) {
 189                 /* TODO: byteswapping */
 190                 memcpy(&seghdr, src + offset / 4, sizeof(seghdr));
 191                 offset += sizeof(seghdr);
 192                 if (seghdr.sync1 != APU_ROM_SYNC1 ||
 193                     seghdr.sync2 != APU_ROM_SYNC2) {
 194                         offset += seghdr.size;
 195                         continue;
 196                 }
 197                 CX18_DEBUG_INFO("load segment %x-%x\n", seghdr.addr,
 198                                 seghdr.addr + seghdr.size - 1);
 199                 if (offset + seghdr.size > sz)
 200                         break;
 201                 for (i = 0; i < seghdr.size; i += 4096) {
 202                         setup_page(offset + i);
 203                         for (j = i; j < seghdr.size && j < i + 4096; j += 4) {
 204                                 /* no need for endianness conversion on the ppc */
 205                                 __raw_writel(src[(offset + j) / 4], dst + seghdr.addr + j);
 206                                 if (__raw_readl(dst + seghdr.addr + j) != src[(offset + j) / 4]) {
 207                                         CX18_ERR("Mismatch at offset %x\n", offset + j);
 208                                         release_firmware(fw);
 209                                         return -EIO;
 210                                 }
 211                         }
 212                 }
 213                 offset += seghdr.size;
 214         }
 215         if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags))
 216                 CX18_INFO("loaded %s firmware V%08x (%zd bytes)\n",
 217                                 fn, apu_version, fw->size);
 218         release_firmware(fw);
 219         /* Clear bit0 for APU to start from 0 */
 220         write_reg(read_reg(0xc72030) & ~1, 0xc72030);
 221         return size;
 222 }
 223
 224 void cx18_halt_firmware(struct cx18 *cx)
 225 {
 226         CX18_DEBUG_INFO("Preparing for firmware halt.\n");
 227         write_reg(0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */
 228         write_reg(0x00020002, CX18_ADEC_CONTROL);
 229 }
 230
 231 void cx18_init_power(struct cx18 *cx, int lowpwr)
 232 {
 233         /* power-down Spare and AOM PLLs */
 234         /* power-up fast, slow and mpeg PLLs */
 235         write_reg(0x00000008, CX18_PLL_POWER_DOWN);
 236
 237         /* ADEC out of sleep */
 238         write_reg(0x00020000, CX18_ADEC_CONTROL);
 239
 240         /* The fast clock is at 200/245 MHz */
 241         write_reg(lowpwr ? 0xD : 0x11, CX18_FAST_CLOCK_PLL_INT);
 242         write_reg(lowpwr ? 0x1EFBF37 : 0x038E3D7, CX18_FAST_CLOCK_PLL_FRAC);
 243
 244         write_reg(2, CX18_FAST_CLOCK_PLL_POST);
 245         write_reg(1, CX18_FAST_CLOCK_PLL_PRESCALE);
 246         write_reg(4, CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH);
 247
 248         /* set slow clock to 125/120 MHz */
 249         write_reg(lowpwr ? 0x11 : 0x10, CX18_SLOW_CLOCK_PLL_INT);
 250         write_reg(lowpwr ? 0xEBAF05 : 0x18618A8, CX18_SLOW_CLOCK_PLL_FRAC);
 251         write_reg(4, CX18_SLOW_CLOCK_PLL_POST);
 252
 253         /* mpeg clock pll 54MHz */
 254         write_reg(0xF, CX18_MPEG_CLOCK_PLL_INT);
 255         write_reg(0x2BCFEF, CX18_MPEG_CLOCK_PLL_FRAC);
 256         write_reg(8, CX18_MPEG_CLOCK_PLL_POST);
 257
 258         /* Defaults */
 259         /* APU = SC or SC/2 = 125/62.5 */
 260         /* EPU = SC = 125 */
 261         /* DDR = FC = 180 */
 262         /* ENC = SC = 125 */
 263         /* AI1 = SC = 125 */
 264         /* VIM2 = disabled */
 265         /* PCI = FC/2 = 90 */
 266         /* AI2 = disabled */
 267         /* DEMUX = disabled */
 268         /* AO = SC/2 = 62.5 */
 269         /* SER = 54MHz */
 270         /* VFC = disabled */
 271         /* USB = disabled */
 272
 273         write_reg(lowpwr ? 0xFFFF0020 : 0x00060004, CX18_CLOCK_SELECT1);
 274         write_reg(lowpwr ? 0xFFFF0004 : 0x00060006, CX18_CLOCK_SELECT2);
 275
 276         write_reg(0xFFFF0002, CX18_HALF_CLOCK_SELECT1);
 277         write_reg(0xFFFF0104, CX18_HALF_CLOCK_SELECT2);
 278
 279         write_reg(0xFFFF9026, CX18_CLOCK_ENABLE1);
 280         write_reg(0xFFFF3105, CX18_CLOCK_ENABLE2);
 281 }
 282
 283 void cx18_init_memory(struct cx18 *cx)
 284 {
 285         cx18_msleep_timeout(10, 0);
 286         write_reg(0x10000, CX18_DDR_SOFT_RESET);
 287         cx18_msleep_timeout(10, 0);
 288
 289         write_reg(cx->card->ddr.chip_config, CX18_DDR_CHIP_CONFIG);
 290
 291         cx18_msleep_timeout(10, 0);
 292
 293         write_reg(cx->card->ddr.refresh, CX18_DDR_REFRESH);
 294         write_reg(cx->card->ddr.timing1, CX18_DDR_TIMING1);
 295         write_reg(cx->card->ddr.timing2, CX18_DDR_TIMING2);
 296
 297         cx18_msleep_timeout(10, 0);
 298
 299         /* Initialize DQS pad time */
 300         write_reg(cx->card->ddr.tune_lane, CX18_DDR_TUNE_LANE);
 301         write_reg(cx->card->ddr.initial_emrs, CX18_DDR_INITIAL_EMRS);
 302
 303         cx18_msleep_timeout(10, 0);
 304
 305         write_reg(0x20000, CX18_DDR_SOFT_RESET);
 306         cx18_msleep_timeout(10, 0);
 307
 308         /* use power-down mode when idle */
 309         write_reg(0x00000010, CX18_DDR_POWER_REG);
 310
 311         write_reg(0x10001, CX18_REG_BUS_TIMEOUT_EN);
 312
 313         write_reg(0x48, CX18_DDR_MB_PER_ROW_7);
 314         write_reg(0xE0000, CX18_DDR_BASE_63_ADDR);
 315
 316         write_reg(0x00000101, CX18_WMB_CLIENT02);  /* AO */
 317         write_reg(0x00000101, CX18_WMB_CLIENT09);  /* AI2 */
 318         write_reg(0x00000101, CX18_WMB_CLIENT05);  /* VIM1 */
 319         write_reg(0x00000101, CX18_WMB_CLIENT06);  /* AI1 */
 320         write_reg(0x00000101, CX18_WMB_CLIENT07);  /* 3D comb */
 321         write_reg(0x00000101, CX18_WMB_CLIENT10);  /* ME */
 322         write_reg(0x00000101, CX18_WMB_CLIENT12);  /* ENC */
 323         write_reg(0x00000101, CX18_WMB_CLIENT13);  /* PK */
 324         write_reg(0x00000101, CX18_WMB_CLIENT11);  /* RC */
 325         write_reg(0x00000101, CX18_WMB_CLIENT14);  /* AVO */
 326 }
 327
 328 int cx18_firmware_init(struct cx18 *cx)
 329 {
 330         /* Allow chip to control CLKRUN */
 331         write_reg(0x5, CX18_DSP0_INTERRUPT_MASK);
 332
 333         write_reg(0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */
 334
 335         cx18_msleep_timeout(1, 0);
 336
 337         sw1_irq_enable(IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU);
 338         sw2_irq_enable(IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK);
 339
 340         /* Only if the processor is not running */
 341         if (read_reg(CX18_PROC_SOFT_RESET) & 8) {
 342                 int sz = load_apu_fw_direct("v4l-cx23418-apu.fw",
 343                                cx->enc_mem, cx, CX18_FW_APU_SIZE);
 344
 345                 write_enc(0xE51FF004, 0);
 346                 write_enc(0xa00000, 4);  /* todo: not hardcoded */
 347                 write_reg(0x00010000, CX18_PROC_SOFT_RESET); /* Start APU */
 348                 cx18_msleep_timeout(500, 0);
 349
 350                 sz = sz <= 0 ? sz : load_cpu_fw_direct("v4l-cx23418-cpu.fw",
 351                                         cx->enc_mem, cx, CX18_FW_CPU_SIZE);
 352
 353                 if (sz > 0) {
 354                         int retries = 0;
 355
 356                         /* start the CPU */
 357                         write_reg(0x00080000, CX18_PROC_SOFT_RESET);
 358                         while (retries++ < 50) { /* Loop for max 500mS */
 359                                 if ((read_reg(CX18_PROC_SOFT_RESET) & 1) == 0)
 360                                         break;
 361                                 cx18_msleep_timeout(10, 0);
 362                         }
 363                         cx18_msleep_timeout(200, 0);
 364                         if (retries == 51) {
 365                                 CX18_ERR("Could not start the CPU\n");
 366                                 return -EIO;
 367                         }
 368                 }
 369                 if (sz <= 0)
 370                         return -EIO;
 371         }
 372         /* initialize GPIO */
 373         write_reg(0x14001400, 0xC78110);
 374         return 0;
 375 }