2 * Kernel execution entry point code.
4 * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
5 * Initial PowerPC version.
6 * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
8 * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
9 * Low-level exception handers, MMU support, and rewrite.
10 * Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
11 * PowerPC 8xx modifications.
12 * Copyright (c) 1998-1999 TiVo, Inc.
13 * PowerPC 403GCX modifications.
14 * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
15 * PowerPC 403GCX/405GP modifications.
16 * Copyright 2000 MontaVista Software Inc.
17 * PPC405 modifications
18 * PowerPC 403GCX/405GP modifications.
19 * Author: MontaVista Software, Inc.
20 * frank_rowand@mvista.com or source@mvista.com
21 * debbie_chu@mvista.com
22 * Copyright 2002-2005 MontaVista Software, Inc.
23 * PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
25 * This program is free software; you can redistribute it and/or modify it
26 * under the terms of the GNU General Public License as published by the
27 * Free Software Foundation; either version 2 of the License, or (at your
28 * option) any later version.
31 #include <asm/processor.h>
34 #include <asm/pgtable.h>
35 #include <asm/cputable.h>
36 #include <asm/thread_info.h>
37 #include <asm/ppc_asm.h>
38 #include <asm/asm-offsets.h>
39 #include "head_booke.h"
42 /* As with the other PowerPC ports, it is expected that when code
43 * execution begins here, the following registers contain valid, yet
44 * optional, information:
46 * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
47 * r4 - Starting address of the init RAM disk
48 * r5 - Ending address of the init RAM disk
49 * r6 - Start of kernel command line string (e.g. "mem=128")
50 * r7 - End of kernel command line string
53 .section .text.head, "ax"
57 * Reserve a word at a fixed location to store the address
62 * Save parameters we are passed
69 li r24,0 /* CPU number */
72 * Set up the initial MMU state
74 * We are still executing code at the virtual address
75 * mappings set by the firmware for the base of RAM.
77 * We first invalidate all TLB entries but the one
78 * we are running from. We then load the KERNELBASE
79 * mappings so we can begin to use kernel addresses
80 * natively and so the interrupt vector locations are
81 * permanently pinned (necessary since Book E
82 * implementations always have translation enabled).
84 * TODO: Use the known TLB entry we are running from to
85 * determine which physical region we are located
86 * in. This can be used to determine where in RAM
87 * (on a shared CPU system) or PCI memory space
88 * (on a DRAMless system) we are located.
89 * For now, we assume a perfect world which means
90 * we are located at the base of DRAM (physical 0).
94 * Search TLB for entry that we are currently using.
95 * Invalidate all entries but the one we are using.
97 /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
98 mfspr r3,SPRN_PID /* Get PID */
99 mfmsr r4 /* Get MSR */
100 andi. r4,r4,MSR_IS@l /* TS=1? */
101 beq wmmucr /* If not, leave STS=0 */
102 oris r3,r3,PPC44x_MMUCR_STS@h /* Set STS=1 */
103 wmmucr: mtspr SPRN_MMUCR,r3 /* Put MMUCR */
106 bl invstr /* Find our address */
107 invstr: mflr r5 /* Make it accessible */
108 tlbsx r23,0,r5 /* Find entry we are in */
109 li r4,0 /* Start at TLB entry 0 */
110 li r3,0 /* Set PAGEID inval value */
111 1: cmpw r23,r4 /* Is this our entry? */
112 beq skpinv /* If so, skip the inval */
113 tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */
114 skpinv: addi r4,r4,1 /* Increment */
115 cmpwi r4,64 /* Are we done? */
116 bne 1b /* If not, repeat */
117 isync /* If so, context change */
120 * Configure and load pinned entry into TLB slot 63.
124 ori r3,r3,PAGE_OFFSET@l
126 /* Kernel is at the base of RAM */
127 li r4, 0 /* Load the kernel physical address */
129 /* Load the kernel PID = 0 */
134 /* Initialize MMUCR */
140 clrrwi r3,r3,10 /* Mask off the effective page number */
141 ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
144 clrrwi r4,r4,10 /* Mask off the real page number */
145 /* ERPN is 0 for first 4GB page */
148 /* Added guarded bit to protect against speculative loads/stores */
150 ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
152 li r0,63 /* TLB slot 63 */
154 tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
155 tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
156 tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */
158 /* Force context change */
167 /* If necessary, invalidate original entry we used */
171 tlbwe r6,r23,PPC44x_TLB_PAGEID
175 #ifdef CONFIG_PPC_EARLY_DEBUG_44x
176 /* Add UART mapping for early debug. */
179 lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
180 ori r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K
183 lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
184 ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
187 li r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G)
188 li r0,62 /* TLB slot 0 */
190 tlbwe r3,r0,PPC44x_TLB_PAGEID
191 tlbwe r4,r0,PPC44x_TLB_XLAT
192 tlbwe r5,r0,PPC44x_TLB_ATTRIB
194 /* Force context change */
196 #endif /* CONFIG_PPC_EARLY_DEBUG_44x */
198 /* Establish the interrupt vector offsets */
199 SET_IVOR(0, CriticalInput);
200 SET_IVOR(1, MachineCheck);
201 SET_IVOR(2, DataStorage);
202 SET_IVOR(3, InstructionStorage);
203 SET_IVOR(4, ExternalInput);
204 SET_IVOR(5, Alignment);
205 SET_IVOR(6, Program);
206 SET_IVOR(7, FloatingPointUnavailable);
207 SET_IVOR(8, SystemCall);
208 SET_IVOR(9, AuxillaryProcessorUnavailable);
209 SET_IVOR(10, Decrementer);
210 SET_IVOR(11, FixedIntervalTimer);
211 SET_IVOR(12, WatchdogTimer);
212 SET_IVOR(13, DataTLBError);
213 SET_IVOR(14, InstructionTLBError);
214 SET_IVOR(15, DebugCrit);
216 /* Establish the interrupt vector base */
217 lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
221 * This is where the main kernel code starts.
226 ori r2,r2,init_task@l
228 /* ptr to current thread */
229 addi r4,r2,THREAD /* init task's THREAD */
233 lis r1,init_thread_union@h
234 ori r1,r1,init_thread_union@l
236 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
241 * Decide what sort of machine this is and initialize the MMU.
251 /* Setup PTE pointers for the Abatron bdiGDB */
252 lis r6, swapper_pg_dir@h
253 ori r6, r6, swapper_pg_dir@l
254 lis r5, abatron_pteptrs@h
255 ori r5, r5, abatron_pteptrs@l
257 ori r4, r4, KERNELBASE@l
258 stw r5, 0(r4) /* Save abatron_pteptrs at a fixed location */
262 lis r4,start_kernel@h
263 ori r4,r4,start_kernel@l
265 ori r3,r3,MSR_KERNEL@l
268 rfi /* change context and jump to start_kernel */
271 * Interrupt vector entry code
273 * The Book E MMUs are always on so we don't need to handle
274 * interrupts in real mode as with previous PPC processors. In
275 * this case we handle interrupts in the kernel virtual address
278 * Interrupt vectors are dynamically placed relative to the
279 * interrupt prefix as determined by the address of interrupt_base.
280 * The interrupt vectors offsets are programmed using the labels
281 * for each interrupt vector entry.
283 * Interrupt vectors must be aligned on a 16 byte boundary.
284 * We align on a 32 byte cache line boundary for good measure.
288 /* Critical Input Interrupt */
289 CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception)
291 /* Machine Check Interrupt */
292 CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
293 MCHECK_EXCEPTION(0x0210, MachineCheckA, machine_check_exception)
295 /* Data Storage Interrupt */
296 START_EXCEPTION(DataStorage)
297 mtspr SPRN_SPRG0, r10 /* Save some working registers */
298 mtspr SPRN_SPRG1, r11
299 mtspr SPRN_SPRG4W, r12
300 mtspr SPRN_SPRG5W, r13
302 mtspr SPRN_SPRG7W, r11
305 * Check if it was a store fault, if not then bail
306 * because a user tried to access a kernel or
307 * read-protected page. Otherwise, get the
308 * offending address and handle it.
311 andis. r10, r10, ESR_ST@h
314 mfspr r10, SPRN_DEAR /* Get faulting address */
316 /* If we are faulting a kernel address, we have to use the
317 * kernel page tables.
319 lis r11, PAGE_OFFSET@h
322 lis r11, swapper_pg_dir@h
323 ori r11, r11, swapper_pg_dir@l
326 rlwinm r12,r12,0,0,23 /* Clear TID */
330 /* Get the PGD for the current thread */
335 /* Load PID into MMUCR TID */
336 mfspr r12,SPRN_MMUCR /* Get MMUCR */
337 mfspr r13,SPRN_PID /* Get PID */
338 rlwimi r12,r13,0,24,31 /* Set TID */
343 rlwinm r12, r10, 13, 19, 29 /* Compute pgdir/pmd offset */
344 lwzx r11, r12, r11 /* Get pgd/pmd entry */
345 rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */
346 beq 2f /* Bail if no table */
348 rlwimi r12, r10, 23, 20, 28 /* Compute pte address */
349 lwz r11, 4(r12) /* Get pte entry */
351 andi. r13, r11, _PAGE_RW /* Is it writeable? */
352 beq 2f /* Bail if not */
356 ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
357 stw r11, 4(r12) /* Update Linux page table */
359 li r13, PPC44x_TLB_SR@l /* Set SR */
360 rlwimi r13, r11, 29, 29, 29 /* SX = _PAGE_HWEXEC */
361 rlwimi r13, r11, 0, 30, 30 /* SW = _PAGE_RW */
362 rlwimi r13, r11, 29, 28, 28 /* UR = _PAGE_USER */
363 rlwimi r12, r11, 31, 26, 26 /* (_PAGE_USER>>1)->r12 */
364 rlwimi r12, r11, 29, 30, 30 /* (_PAGE_USER>>3)->r12 */
365 and r12, r12, r11 /* HWEXEC/RW & USER */
366 rlwimi r13, r12, 0, 26, 26 /* UX = HWEXEC & USER */
367 rlwimi r13, r12, 3, 27, 27 /* UW = RW & USER */
369 rlwimi r11,r13,0,26,31 /* Insert static perms */
372 * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added
373 * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see
374 * include/asm-powerpc/pgtable-ppc32.h for details).
376 rlwinm r11,r11,0,20,10
378 /* find the TLB index that caused the fault. It has to be here. */
381 tlbwe r11, r10, PPC44x_TLB_ATTRIB /* Write ATTRIB */
383 /* Done...restore registers and get out of here.
385 mfspr r11, SPRN_SPRG7R
387 mfspr r13, SPRN_SPRG5R
388 mfspr r12, SPRN_SPRG4R
390 mfspr r11, SPRN_SPRG1
391 mfspr r10, SPRN_SPRG0
392 rfi /* Force context change */
396 * The bailout. Restore registers to pre-exception conditions
397 * and call the heavyweights to help us out.
399 mfspr r11, SPRN_SPRG7R
401 mfspr r13, SPRN_SPRG5R
402 mfspr r12, SPRN_SPRG4R
404 mfspr r11, SPRN_SPRG1
405 mfspr r10, SPRN_SPRG0
408 /* Instruction Storage Interrupt */
409 INSTRUCTION_STORAGE_EXCEPTION
411 /* External Input Interrupt */
412 EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
414 /* Alignment Interrupt */
417 /* Program Interrupt */
420 /* Floating Point Unavailable Interrupt */
421 #ifdef CONFIG_PPC_FPU
422 FP_UNAVAILABLE_EXCEPTION
424 EXCEPTION(0x2010, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
427 /* System Call Interrupt */
428 START_EXCEPTION(SystemCall)
429 NORMAL_EXCEPTION_PROLOG
430 EXC_XFER_EE_LITE(0x0c00, DoSyscall)
432 /* Auxillary Processor Unavailable Interrupt */
433 EXCEPTION(0x2020, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
435 /* Decrementer Interrupt */
436 DECREMENTER_EXCEPTION
438 /* Fixed Internal Timer Interrupt */
439 /* TODO: Add FIT support */
440 EXCEPTION(0x1010, FixedIntervalTimer, unknown_exception, EXC_XFER_EE)
442 /* Watchdog Timer Interrupt */
443 /* TODO: Add watchdog support */
444 #ifdef CONFIG_BOOKE_WDT
445 CRITICAL_EXCEPTION(0x1020, WatchdogTimer, WatchdogException)
447 CRITICAL_EXCEPTION(0x1020, WatchdogTimer, unknown_exception)
450 /* Data TLB Error Interrupt */
451 START_EXCEPTION(DataTLBError)
452 mtspr SPRN_SPRG0, r10 /* Save some working registers */
453 mtspr SPRN_SPRG1, r11
454 mtspr SPRN_SPRG4W, r12
455 mtspr SPRN_SPRG5W, r13
457 mtspr SPRN_SPRG7W, r11
458 mfspr r10, SPRN_DEAR /* Get faulting address */
460 /* If we are faulting a kernel address, we have to use the
461 * kernel page tables.
463 lis r11, PAGE_OFFSET@h
466 lis r11, swapper_pg_dir@h
467 ori r11, r11, swapper_pg_dir@l
470 rlwinm r12,r12,0,0,23 /* Clear TID */
474 /* Get the PGD for the current thread */
479 /* Load PID into MMUCR TID */
481 mfspr r13,SPRN_PID /* Get PID */
482 rlwimi r12,r13,0,24,31 /* Set TID */
487 rlwinm r12, r10, 13, 19, 29 /* Compute pgdir/pmd offset */
488 lwzx r11, r12, r11 /* Get pgd/pmd entry */
489 rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */
490 beq 2f /* Bail if no table */
492 rlwimi r12, r10, 23, 20, 28 /* Compute pte address */
493 lwz r11, 4(r12) /* Get pte entry */
494 andi. r13, r11, _PAGE_PRESENT /* Is the page present? */
495 beq 2f /* Bail if not present */
497 ori r11, r11, _PAGE_ACCESSED
500 /* Jump to common tlb load */
504 /* The bailout. Restore registers to pre-exception conditions
505 * and call the heavyweights to help us out.
507 mfspr r11, SPRN_SPRG7R
509 mfspr r13, SPRN_SPRG5R
510 mfspr r12, SPRN_SPRG4R
511 mfspr r11, SPRN_SPRG1
512 mfspr r10, SPRN_SPRG0
515 /* Instruction TLB Error Interrupt */
517 * Nearly the same as above, except we get our
518 * information from different registers and bailout
519 * to a different point.
521 START_EXCEPTION(InstructionTLBError)
522 mtspr SPRN_SPRG0, r10 /* Save some working registers */
523 mtspr SPRN_SPRG1, r11
524 mtspr SPRN_SPRG4W, r12
525 mtspr SPRN_SPRG5W, r13
527 mtspr SPRN_SPRG7W, r11
528 mfspr r10, SPRN_SRR0 /* Get faulting address */
530 /* If we are faulting a kernel address, we have to use the
531 * kernel page tables.
533 lis r11, PAGE_OFFSET@h
536 lis r11, swapper_pg_dir@h
537 ori r11, r11, swapper_pg_dir@l
540 rlwinm r12,r12,0,0,23 /* Clear TID */
544 /* Get the PGD for the current thread */
549 /* Load PID into MMUCR TID */
551 mfspr r13,SPRN_PID /* Get PID */
552 rlwimi r12,r13,0,24,31 /* Set TID */
557 rlwinm r12, r10, 13, 19, 29 /* Compute pgdir/pmd offset */
558 lwzx r11, r12, r11 /* Get pgd/pmd entry */
559 rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */
560 beq 2f /* Bail if no table */
562 rlwimi r12, r10, 23, 20, 28 /* Compute pte address */
563 lwz r11, 4(r12) /* Get pte entry */
564 andi. r13, r11, _PAGE_PRESENT /* Is the page present? */
565 beq 2f /* Bail if not present */
567 ori r11, r11, _PAGE_ACCESSED
570 /* Jump to common TLB load point */
574 /* The bailout. Restore registers to pre-exception conditions
575 * and call the heavyweights to help us out.
577 mfspr r11, SPRN_SPRG7R
579 mfspr r13, SPRN_SPRG5R
580 mfspr r12, SPRN_SPRG4R
581 mfspr r11, SPRN_SPRG1
582 mfspr r10, SPRN_SPRG0
585 /* Debug Interrupt */
592 * Data TLB exceptions will bail out to this point
593 * if they can't resolve the lightweight TLB fault.
596 NORMAL_EXCEPTION_PROLOG
597 mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
599 mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
600 EXC_XFER_EE_LITE(0x0300, handle_page_fault)
604 * Both the instruction and data TLB miss get to this
605 * point to load the TLB.
607 * r11 - available to use
608 * r12 - Pointer to the 64-bit PTE
609 * r13 - available to use
610 * MMUCR - loaded with proper value when we get here
611 * Upon exit, we reload everything and RFI.
615 * We set execute, because we don't have the granularity to
616 * properly set this at the page level (Linux problem).
617 * If shared is set, we cause a zero PID->TID load.
618 * Many of these bits are software only. Bits we don't set
619 * here we (properly should) assume have the appropriate value.
622 /* Load the next available TLB index */
623 lis r13, tlb_44x_index@ha
624 lwz r13, tlb_44x_index@l(r13)
625 /* Load the TLB high watermark */
626 lis r11, tlb_44x_hwater@ha
627 lwz r11, tlb_44x_hwater@l(r11)
629 /* Increment, rollover, and store TLB index */
631 cmpw 0, r13, r11 /* reserve entries */
635 /* Store the next available TLB index */
636 lis r11, tlb_44x_index@ha
637 stw r13, tlb_44x_index@l(r11)
639 lwz r11, 0(r12) /* Get MS word of PTE */
640 lwz r12, 4(r12) /* Get LS word of PTE */
641 rlwimi r11, r12, 0, 0 , 19 /* Insert RPN */
642 tlbwe r11, r13, PPC44x_TLB_XLAT /* Write XLAT */
645 * Create PAGEID. This is the faulting address,
646 * page size, and valid flag.
648 li r11, PPC44x_TLB_VALID | PPC44x_TLB_4K
649 rlwimi r10, r11, 0, 20, 31 /* Insert valid and page size */
650 tlbwe r10, r13, PPC44x_TLB_PAGEID /* Write PAGEID */
652 li r10, PPC44x_TLB_SR@l /* Set SR */
653 rlwimi r10, r12, 0, 30, 30 /* Set SW = _PAGE_RW */
654 rlwimi r10, r12, 29, 29, 29 /* SX = _PAGE_HWEXEC */
655 rlwimi r10, r12, 29, 28, 28 /* UR = _PAGE_USER */
656 rlwimi r11, r12, 31, 26, 26 /* (_PAGE_USER>>1)->r12 */
657 and r11, r12, r11 /* HWEXEC & USER */
658 rlwimi r10, r11, 0, 26, 26 /* UX = HWEXEC & USER */
660 rlwimi r12, r10, 0, 26, 31 /* Insert static perms */
663 * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added
664 * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see
665 * include/asm-powerpc/pgtable-ppc32.h for details).
667 rlwinm r12, r12, 0, 20, 10
669 tlbwe r12, r13, PPC44x_TLB_ATTRIB /* Write ATTRIB */
671 /* Done...restore registers and get out of here.
673 mfspr r11, SPRN_SPRG7R
675 mfspr r13, SPRN_SPRG5R
676 mfspr r12, SPRN_SPRG4R
677 mfspr r11, SPRN_SPRG1
678 mfspr r10, SPRN_SPRG0
679 rfi /* Force context change */
686 * Adjust the machine check IVOR on 440A cores
688 _GLOBAL(__fixup_440A_mcheck)
689 li r3,MachineCheckA@l
695 * extern void giveup_altivec(struct task_struct *prev)
697 * The 44x core does not have an AltiVec unit.
699 _GLOBAL(giveup_altivec)
703 * extern void giveup_fpu(struct task_struct *prev)
705 * The 44x core does not have an FPU.
707 #ifndef CONFIG_PPC_FPU
714 #ifdef CONFIG_BDI_SWITCH
715 /* Context switch the PTE pointer for the Abatron BDI2000.
716 * The PGDIR is the second parameter.
718 lis r5, abatron_pteptrs@h
719 ori r5, r5, abatron_pteptrs@l
723 isync /* Force context change */
727 * We put a few things here that have to be page-aligned. This stuff
728 * goes at the beginning of the data segment, which is page-aligned.
734 .globl empty_zero_page
739 * To support >32-bit physical addresses, we use an 8KB pgdir.
741 .globl swapper_pg_dir
743 .space PGD_TABLE_SIZE
745 /* Reserved 4k for the critical exception stack & 4k for the machine
746 * check stack per CPU for kernel mode exceptions */
749 exception_stack_bottom:
750 .space BOOKE_EXCEPTION_STACK_SIZE
751 .globl exception_stack_top
755 * Room for two PTE pointers, usually the kernel and current user pointers
756 * to their respective root page table.