1 /******************************************************************************
3 * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * James P. Ketrenos <ipw2100-admin@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/version.h>
33 #include <linux/init.h>
34 #include <linux/pci.h>
35 #include <linux/dma-mapping.h>
36 #include <linux/delay.h>
37 #include <linux/skbuff.h>
38 #include <linux/netdevice.h>
39 #include <linux/wireless.h>
40 #include <linux/firmware.h>
41 #include <linux/etherdevice.h>
42 #include <linux/if_arp.h>
44 #include <net/ieee80211_radiotap.h>
45 #include <net/mac80211.h>
47 #include <asm/div64.h>
49 #include "iwl-3945-core.h"
51 #include "iwl-helpers.h"
53 #ifdef CONFIG_IWL3945_DEBUG
54 u32 iwl3945_debug_level;
57 static int iwl3945_tx_queue_update_write_ptr(struct iwl3945_priv *priv,
58 struct iwl3945_tx_queue *txq);
60 /******************************************************************************
64 ******************************************************************************/
66 /* module parameters */
67 static int iwl3945_param_disable_hw_scan; /* def: 0 = use 3945's h/w scan */
68 static int iwl3945_param_debug; /* def: 0 = minimal debug log messages */
69 static int iwl3945_param_disable; /* def: 0 = enable radio */
70 static int iwl3945_param_antenna; /* def: 0 = both antennas (use diversity) */
71 int iwl3945_param_hwcrypto; /* def: 0 = use software encryption */
72 static int iwl3945_param_qos_enable = 1; /* def: 1 = use quality of service */
73 int iwl3945_param_queues_num = IWL39_MAX_NUM_QUEUES; /* def: 8 Tx queues */
76 * module name, copyright, version, etc.
77 * NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk
80 #define DRV_DESCRIPTION \
81 "Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
83 #ifdef CONFIG_IWL3945_DEBUG
89 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
95 #define IWLWIFI_VERSION "1.2.26k" VD VS
96 #define DRV_COPYRIGHT "Copyright(c) 2003-2008 Intel Corporation"
97 #define DRV_VERSION IWLWIFI_VERSION
100 MODULE_DESCRIPTION(DRV_DESCRIPTION);
101 MODULE_VERSION(DRV_VERSION);
102 MODULE_AUTHOR(DRV_COPYRIGHT);
103 MODULE_LICENSE("GPL");
105 static __le16 *ieee80211_get_qos_ctrl(struct ieee80211_hdr *hdr)
107 u16 fc = le16_to_cpu(hdr->frame_control);
108 int hdr_len = ieee80211_get_hdrlen(fc);
110 if ((fc & 0x00cc) == (IEEE80211_STYPE_QOS_DATA | IEEE80211_FTYPE_DATA))
111 return (__le16 *) ((u8 *) hdr + hdr_len - QOS_CONTROL_LEN);
115 static const struct ieee80211_supported_band *iwl3945_get_band(
116 struct iwl3945_priv *priv, enum ieee80211_band band)
118 return priv->hw->wiphy->bands[band];
121 static int iwl3945_is_empty_essid(const char *essid, int essid_len)
123 /* Single white space is for Linksys APs */
124 if (essid_len == 1 && essid[0] == ' ')
127 /* Otherwise, if the entire essid is 0, we assume it is hidden */
130 if (essid[essid_len] != '\0')
137 static const char *iwl3945_escape_essid(const char *essid, u8 essid_len)
139 static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
140 const char *s = essid;
143 if (iwl3945_is_empty_essid(essid, essid_len)) {
144 memcpy(escaped, "<hidden>", sizeof("<hidden>"));
148 essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE);
149 while (essid_len--) {
161 /*************** DMA-QUEUE-GENERAL-FUNCTIONS *****
164 * Theory of operation
166 * A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer
167 * of buffer descriptors, each of which points to one or more data buffers for
168 * the device to read from or fill. Driver and device exchange status of each
169 * queue via "read" and "write" pointers. Driver keeps minimum of 2 empty
170 * entries in each circular buffer, to protect against confusing empty and full
173 * The device reads or writes the data in the queues via the device's several
174 * DMA/FIFO channels. Each queue is mapped to a single DMA channel.
176 * For Tx queue, there are low mark and high mark limits. If, after queuing
177 * the packet for Tx, free space become < low mark, Tx queue stopped. When
178 * reclaiming packets (on 'tx done IRQ), if free space become > high mark,
181 * The 3945 operates with six queues: One receive queue, one transmit queue
182 * (#4) for sending commands to the device firmware, and four transmit queues
183 * (#0-3) for data tx via EDCA. An additional 2 HCCA queues are unused.
184 ***************************************************/
186 int iwl3945_queue_space(const struct iwl3945_queue *q)
188 int s = q->read_ptr - q->write_ptr;
190 if (q->read_ptr > q->write_ptr)
195 /* keep some reserve to not confuse empty and full situations */
202 int iwl3945_x2_queue_used(const struct iwl3945_queue *q, int i)
204 return q->write_ptr > q->read_ptr ?
205 (i >= q->read_ptr && i < q->write_ptr) :
206 !(i < q->read_ptr && i >= q->write_ptr);
210 static inline u8 get_cmd_index(struct iwl3945_queue *q, u32 index, int is_huge)
212 /* This is for scan command, the big buffer at end of command array */
214 return q->n_window; /* must be power of 2 */
216 /* Otherwise, use normal size buffers */
217 return index & (q->n_window - 1);
221 * iwl3945_queue_init - Initialize queue's high/low-water and read/write indexes
223 static int iwl3945_queue_init(struct iwl3945_priv *priv, struct iwl3945_queue *q,
224 int count, int slots_num, u32 id)
227 q->n_window = slots_num;
230 /* count must be power-of-two size, otherwise iwl_queue_inc_wrap
231 * and iwl_queue_dec_wrap are broken. */
232 BUG_ON(!is_power_of_2(count));
234 /* slots_num must be power-of-two size, otherwise
235 * get_cmd_index is broken. */
236 BUG_ON(!is_power_of_2(slots_num));
238 q->low_mark = q->n_window / 4;
242 q->high_mark = q->n_window / 8;
243 if (q->high_mark < 2)
246 q->write_ptr = q->read_ptr = 0;
252 * iwl3945_tx_queue_alloc - Alloc driver data and TFD CB for one Tx/cmd queue
254 static int iwl3945_tx_queue_alloc(struct iwl3945_priv *priv,
255 struct iwl3945_tx_queue *txq, u32 id)
257 struct pci_dev *dev = priv->pci_dev;
259 /* Driver private data, only for Tx (not command) queues,
260 * not shared with device. */
261 if (id != IWL_CMD_QUEUE_NUM) {
262 txq->txb = kmalloc(sizeof(txq->txb[0]) *
263 TFD_QUEUE_SIZE_MAX, GFP_KERNEL);
265 IWL_ERROR("kmalloc for auxiliary BD "
266 "structures failed\n");
272 /* Circular buffer of transmit frame descriptors (TFDs),
273 * shared with device */
274 txq->bd = pci_alloc_consistent(dev,
275 sizeof(txq->bd[0]) * TFD_QUEUE_SIZE_MAX,
279 IWL_ERROR("pci_alloc_consistent(%zd) failed\n",
280 sizeof(txq->bd[0]) * TFD_QUEUE_SIZE_MAX);
297 * iwl3945_tx_queue_init - Allocate and initialize one tx/cmd queue
299 int iwl3945_tx_queue_init(struct iwl3945_priv *priv,
300 struct iwl3945_tx_queue *txq, int slots_num, u32 txq_id)
302 struct pci_dev *dev = priv->pci_dev;
307 * Alloc buffer array for commands (Tx or other types of commands).
308 * For the command queue (#4), allocate command space + one big
309 * command for scan, since scan command is very huge; the system will
310 * not have two scans at the same time, so only one is needed.
311 * For data Tx queues (all other queues), no super-size command
314 len = sizeof(struct iwl3945_cmd) * slots_num;
315 if (txq_id == IWL_CMD_QUEUE_NUM)
316 len += IWL_MAX_SCAN_SIZE;
317 txq->cmd = pci_alloc_consistent(dev, len, &txq->dma_addr_cmd);
321 /* Alloc driver data array and TFD circular buffer */
322 rc = iwl3945_tx_queue_alloc(priv, txq, txq_id);
324 pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd);
328 txq->need_update = 0;
330 /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
331 * iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */
332 BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1));
334 /* Initialize queue high/low-water, head/tail indexes */
335 iwl3945_queue_init(priv, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
337 /* Tell device where to find queue, enable DMA channel. */
338 iwl3945_hw_tx_queue_init(priv, txq);
344 * iwl3945_tx_queue_free - Deallocate DMA queue.
345 * @txq: Transmit queue to deallocate.
347 * Empty queue by removing and destroying all BD's.
349 * 0-fill, but do not free "txq" descriptor structure.
351 void iwl3945_tx_queue_free(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq)
353 struct iwl3945_queue *q = &txq->q;
354 struct pci_dev *dev = priv->pci_dev;
360 /* first, empty all BD's */
361 for (; q->write_ptr != q->read_ptr;
362 q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd))
363 iwl3945_hw_txq_free_tfd(priv, txq);
365 len = sizeof(struct iwl3945_cmd) * q->n_window;
366 if (q->id == IWL_CMD_QUEUE_NUM)
367 len += IWL_MAX_SCAN_SIZE;
369 /* De-alloc array of command/tx buffers */
370 pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd);
372 /* De-alloc circular buffer of TFDs */
374 pci_free_consistent(dev, sizeof(struct iwl3945_tfd_frame) *
375 txq->q.n_bd, txq->bd, txq->q.dma_addr);
377 /* De-alloc array of per-TFD driver data */
383 /* 0-fill queue descriptor structure */
384 memset(txq, 0, sizeof(*txq));
387 const u8 iwl3945_broadcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
389 /*************** STATION TABLE MANAGEMENT ****
390 * mac80211 should be examined to determine if sta_info is duplicating
391 * the functionality provided here
394 /**************************************************************/
395 #if 0 /* temporary disable till we add real remove station */
397 * iwl3945_remove_station - Remove driver's knowledge of station.
399 * NOTE: This does not remove station from device's station table.
401 static u8 iwl3945_remove_station(struct iwl3945_priv *priv, const u8 *addr, int is_ap)
403 int index = IWL_INVALID_STATION;
407 spin_lock_irqsave(&priv->sta_lock, flags);
411 else if (is_broadcast_ether_addr(addr))
412 index = priv->hw_setting.bcast_sta_id;
414 for (i = IWL_STA_ID; i < priv->hw_setting.max_stations; i++)
415 if (priv->stations[i].used &&
416 !compare_ether_addr(priv->stations[i].sta.sta.addr,
422 if (unlikely(index == IWL_INVALID_STATION))
425 if (priv->stations[index].used) {
426 priv->stations[index].used = 0;
427 priv->num_stations--;
430 BUG_ON(priv->num_stations < 0);
433 spin_unlock_irqrestore(&priv->sta_lock, flags);
439 * iwl3945_clear_stations_table - Clear the driver's station table
441 * NOTE: This does not clear or otherwise alter the device's station table.
443 static void iwl3945_clear_stations_table(struct iwl3945_priv *priv)
447 spin_lock_irqsave(&priv->sta_lock, flags);
449 priv->num_stations = 0;
450 memset(priv->stations, 0, sizeof(priv->stations));
452 spin_unlock_irqrestore(&priv->sta_lock, flags);
456 * iwl3945_add_station - Add station to station tables in driver and device
458 u8 iwl3945_add_station(struct iwl3945_priv *priv, const u8 *addr, int is_ap, u8 flags)
461 int index = IWL_INVALID_STATION;
462 struct iwl3945_station_entry *station;
463 unsigned long flags_spin;
464 DECLARE_MAC_BUF(mac);
467 spin_lock_irqsave(&priv->sta_lock, flags_spin);
470 else if (is_broadcast_ether_addr(addr))
471 index = priv->hw_setting.bcast_sta_id;
473 for (i = IWL_STA_ID; i < priv->hw_setting.max_stations; i++) {
474 if (!compare_ether_addr(priv->stations[i].sta.sta.addr,
480 if (!priv->stations[i].used &&
481 index == IWL_INVALID_STATION)
485 /* These two conditions has the same outcome but keep them separate
486 since they have different meaning */
487 if (unlikely(index == IWL_INVALID_STATION)) {
488 spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
492 if (priv->stations[index].used &&
493 !compare_ether_addr(priv->stations[index].sta.sta.addr, addr)) {
494 spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
498 IWL_DEBUG_ASSOC("Add STA ID %d: %s\n", index, print_mac(mac, addr));
499 station = &priv->stations[index];
501 priv->num_stations++;
503 /* Set up the REPLY_ADD_STA command to send to device */
504 memset(&station->sta, 0, sizeof(struct iwl3945_addsta_cmd));
505 memcpy(station->sta.sta.addr, addr, ETH_ALEN);
506 station->sta.mode = 0;
507 station->sta.sta.sta_id = index;
508 station->sta.station_flags = 0;
510 if (priv->band == IEEE80211_BAND_5GHZ)
511 rate = IWL_RATE_6M_PLCP;
513 rate = IWL_RATE_1M_PLCP;
515 /* Turn on both antennas for the station... */
516 station->sta.rate_n_flags =
517 iwl3945_hw_set_rate_n_flags(rate, RATE_MCS_ANT_AB_MSK);
518 station->current_rate.rate_n_flags =
519 le16_to_cpu(station->sta.rate_n_flags);
521 spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
523 /* Add station to device's station table */
524 iwl3945_send_add_station(priv, &station->sta, flags);
529 /*************** DRIVER STATUS FUNCTIONS *****/
531 static inline int iwl3945_is_ready(struct iwl3945_priv *priv)
533 /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
534 * set but EXIT_PENDING is not */
535 return test_bit(STATUS_READY, &priv->status) &&
536 test_bit(STATUS_GEO_CONFIGURED, &priv->status) &&
537 !test_bit(STATUS_EXIT_PENDING, &priv->status);
540 static inline int iwl3945_is_alive(struct iwl3945_priv *priv)
542 return test_bit(STATUS_ALIVE, &priv->status);
545 static inline int iwl3945_is_init(struct iwl3945_priv *priv)
547 return test_bit(STATUS_INIT, &priv->status);
550 static inline int iwl3945_is_rfkill(struct iwl3945_priv *priv)
552 return test_bit(STATUS_RF_KILL_HW, &priv->status) ||
553 test_bit(STATUS_RF_KILL_SW, &priv->status);
556 static inline int iwl3945_is_ready_rf(struct iwl3945_priv *priv)
559 if (iwl3945_is_rfkill(priv))
562 return iwl3945_is_ready(priv);
565 /*************** HOST COMMAND QUEUE FUNCTIONS *****/
567 #define IWL_CMD(x) case x : return #x
569 static const char *get_cmd_string(u8 cmd)
572 IWL_CMD(REPLY_ALIVE);
573 IWL_CMD(REPLY_ERROR);
575 IWL_CMD(REPLY_RXON_ASSOC);
576 IWL_CMD(REPLY_QOS_PARAM);
577 IWL_CMD(REPLY_RXON_TIMING);
578 IWL_CMD(REPLY_ADD_STA);
579 IWL_CMD(REPLY_REMOVE_STA);
580 IWL_CMD(REPLY_REMOVE_ALL_STA);
581 IWL_CMD(REPLY_3945_RX);
583 IWL_CMD(REPLY_RATE_SCALE);
584 IWL_CMD(REPLY_LEDS_CMD);
585 IWL_CMD(REPLY_TX_LINK_QUALITY_CMD);
586 IWL_CMD(RADAR_NOTIFICATION);
587 IWL_CMD(REPLY_QUIET_CMD);
588 IWL_CMD(REPLY_CHANNEL_SWITCH);
589 IWL_CMD(CHANNEL_SWITCH_NOTIFICATION);
590 IWL_CMD(REPLY_SPECTRUM_MEASUREMENT_CMD);
591 IWL_CMD(SPECTRUM_MEASURE_NOTIFICATION);
592 IWL_CMD(POWER_TABLE_CMD);
593 IWL_CMD(PM_SLEEP_NOTIFICATION);
594 IWL_CMD(PM_DEBUG_STATISTIC_NOTIFIC);
595 IWL_CMD(REPLY_SCAN_CMD);
596 IWL_CMD(REPLY_SCAN_ABORT_CMD);
597 IWL_CMD(SCAN_START_NOTIFICATION);
598 IWL_CMD(SCAN_RESULTS_NOTIFICATION);
599 IWL_CMD(SCAN_COMPLETE_NOTIFICATION);
600 IWL_CMD(BEACON_NOTIFICATION);
601 IWL_CMD(REPLY_TX_BEACON);
602 IWL_CMD(WHO_IS_AWAKE_NOTIFICATION);
603 IWL_CMD(QUIET_NOTIFICATION);
604 IWL_CMD(REPLY_TX_PWR_TABLE_CMD);
605 IWL_CMD(MEASURE_ABORT_NOTIFICATION);
606 IWL_CMD(REPLY_BT_CONFIG);
607 IWL_CMD(REPLY_STATISTICS_CMD);
608 IWL_CMD(STATISTICS_NOTIFICATION);
609 IWL_CMD(REPLY_CARD_STATE_CMD);
610 IWL_CMD(CARD_STATE_NOTIFICATION);
611 IWL_CMD(MISSED_BEACONS_NOTIFICATION);
618 #define HOST_COMPLETE_TIMEOUT (HZ / 2)
621 * iwl3945_enqueue_hcmd - enqueue a uCode command
622 * @priv: device private data point
623 * @cmd: a point to the ucode command structure
625 * The function returns < 0 values to indicate the operation is
626 * failed. On success, it turns the index (> 0) of command in the
629 static int iwl3945_enqueue_hcmd(struct iwl3945_priv *priv, struct iwl3945_host_cmd *cmd)
631 struct iwl3945_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM];
632 struct iwl3945_queue *q = &txq->q;
633 struct iwl3945_tfd_frame *tfd;
635 struct iwl3945_cmd *out_cmd;
637 u16 fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr));
638 dma_addr_t phys_addr;
644 /* If any of the command structures end up being larger than
645 * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then
646 * we will need to increase the size of the TFD entries */
647 BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
648 !(cmd->meta.flags & CMD_SIZE_HUGE));
651 if (iwl3945_is_rfkill(priv)) {
652 IWL_DEBUG_INFO("Not sending command - RF KILL");
656 if (iwl3945_queue_space(q) < ((cmd->meta.flags & CMD_ASYNC) ? 2 : 1)) {
657 IWL_ERROR("No space for Tx\n");
661 spin_lock_irqsave(&priv->hcmd_lock, flags);
663 tfd = &txq->bd[q->write_ptr];
664 memset(tfd, 0, sizeof(*tfd));
666 control_flags = (u32 *) tfd;
668 idx = get_cmd_index(q, q->write_ptr, cmd->meta.flags & CMD_SIZE_HUGE);
669 out_cmd = &txq->cmd[idx];
671 out_cmd->hdr.cmd = cmd->id;
672 memcpy(&out_cmd->meta, &cmd->meta, sizeof(cmd->meta));
673 memcpy(&out_cmd->cmd.payload, cmd->data, cmd->len);
675 /* At this point, the out_cmd now has all of the incoming cmd
678 out_cmd->hdr.flags = 0;
679 out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM) |
680 INDEX_TO_SEQ(q->write_ptr));
681 if (out_cmd->meta.flags & CMD_SIZE_HUGE)
682 out_cmd->hdr.sequence |= cpu_to_le16(SEQ_HUGE_FRAME);
684 phys_addr = txq->dma_addr_cmd + sizeof(txq->cmd[0]) * idx +
685 offsetof(struct iwl3945_cmd, hdr);
686 iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, fix_size);
688 pad = U32_PAD(cmd->len);
689 count = TFD_CTL_COUNT_GET(*control_flags);
690 *control_flags = TFD_CTL_COUNT_SET(count) | TFD_CTL_PAD_SET(pad);
692 IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, "
693 "%d bytes at %d[%d]:%d\n",
694 get_cmd_string(out_cmd->hdr.cmd),
695 out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence),
696 fix_size, q->write_ptr, idx, IWL_CMD_QUEUE_NUM);
698 txq->need_update = 1;
700 /* Increment and update queue's write index */
701 q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
702 ret = iwl3945_tx_queue_update_write_ptr(priv, txq);
704 spin_unlock_irqrestore(&priv->hcmd_lock, flags);
705 return ret ? ret : idx;
708 static int iwl3945_send_cmd_async(struct iwl3945_priv *priv, struct iwl3945_host_cmd *cmd)
712 BUG_ON(!(cmd->meta.flags & CMD_ASYNC));
714 /* An asynchronous command can not expect an SKB to be set. */
715 BUG_ON(cmd->meta.flags & CMD_WANT_SKB);
717 /* An asynchronous command MUST have a callback. */
718 BUG_ON(!cmd->meta.u.callback);
720 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
723 ret = iwl3945_enqueue_hcmd(priv, cmd);
725 IWL_ERROR("Error sending %s: iwl3945_enqueue_hcmd failed: %d\n",
726 get_cmd_string(cmd->id), ret);
732 static int iwl3945_send_cmd_sync(struct iwl3945_priv *priv, struct iwl3945_host_cmd *cmd)
737 BUG_ON(cmd->meta.flags & CMD_ASYNC);
739 /* A synchronous command can not have a callback set. */
740 BUG_ON(cmd->meta.u.callback != NULL);
742 if (test_and_set_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status)) {
743 IWL_ERROR("Error sending %s: Already sending a host command\n",
744 get_cmd_string(cmd->id));
749 set_bit(STATUS_HCMD_ACTIVE, &priv->status);
751 if (cmd->meta.flags & CMD_WANT_SKB)
752 cmd->meta.source = &cmd->meta;
754 cmd_idx = iwl3945_enqueue_hcmd(priv, cmd);
757 IWL_ERROR("Error sending %s: iwl3945_enqueue_hcmd failed: %d\n",
758 get_cmd_string(cmd->id), ret);
762 ret = wait_event_interruptible_timeout(priv->wait_command_queue,
763 !test_bit(STATUS_HCMD_ACTIVE, &priv->status),
764 HOST_COMPLETE_TIMEOUT);
766 if (test_bit(STATUS_HCMD_ACTIVE, &priv->status)) {
767 IWL_ERROR("Error sending %s: time out after %dms.\n",
768 get_cmd_string(cmd->id),
769 jiffies_to_msecs(HOST_COMPLETE_TIMEOUT));
771 clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
777 if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
778 IWL_DEBUG_INFO("Command %s aborted: RF KILL Switch\n",
779 get_cmd_string(cmd->id));
783 if (test_bit(STATUS_FW_ERROR, &priv->status)) {
784 IWL_DEBUG_INFO("Command %s failed: FW Error\n",
785 get_cmd_string(cmd->id));
789 if ((cmd->meta.flags & CMD_WANT_SKB) && !cmd->meta.u.skb) {
790 IWL_ERROR("Error: Response NULL in '%s'\n",
791 get_cmd_string(cmd->id));
800 if (cmd->meta.flags & CMD_WANT_SKB) {
801 struct iwl3945_cmd *qcmd;
803 /* Cancel the CMD_WANT_SKB flag for the cmd in the
804 * TX cmd queue. Otherwise in case the cmd comes
805 * in later, it will possibly set an invalid
806 * address (cmd->meta.source). */
807 qcmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx];
808 qcmd->meta.flags &= ~CMD_WANT_SKB;
811 if (cmd->meta.u.skb) {
812 dev_kfree_skb_any(cmd->meta.u.skb);
813 cmd->meta.u.skb = NULL;
816 clear_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status);
820 int iwl3945_send_cmd(struct iwl3945_priv *priv, struct iwl3945_host_cmd *cmd)
822 if (cmd->meta.flags & CMD_ASYNC)
823 return iwl3945_send_cmd_async(priv, cmd);
825 return iwl3945_send_cmd_sync(priv, cmd);
828 int iwl3945_send_cmd_pdu(struct iwl3945_priv *priv, u8 id, u16 len, const void *data)
830 struct iwl3945_host_cmd cmd = {
836 return iwl3945_send_cmd_sync(priv, &cmd);
839 static int __must_check iwl3945_send_cmd_u32(struct iwl3945_priv *priv, u8 id, u32 val)
841 struct iwl3945_host_cmd cmd = {
847 return iwl3945_send_cmd_sync(priv, &cmd);
850 int iwl3945_send_statistics_request(struct iwl3945_priv *priv)
852 return iwl3945_send_cmd_u32(priv, REPLY_STATISTICS_CMD, 0);
856 * iwl3945_set_rxon_channel - Set the phymode and channel values in staging RXON
857 * @band: 2.4 or 5 GHz band
858 * @channel: Any channel valid for the requested band
860 * In addition to setting the staging RXON, priv->band is also set.
862 * NOTE: Does not commit to the hardware; it sets appropriate bit fields
863 * in the staging RXON flag structure based on the band
865 static int iwl3945_set_rxon_channel(struct iwl3945_priv *priv,
866 enum ieee80211_band band,
869 if (!iwl3945_get_channel_info(priv, band, channel)) {
870 IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
875 if ((le16_to_cpu(priv->staging_rxon.channel) == channel) &&
876 (priv->band == band))
879 priv->staging_rxon.channel = cpu_to_le16(channel);
880 if (band == IEEE80211_BAND_5GHZ)
881 priv->staging_rxon.flags &= ~RXON_FLG_BAND_24G_MSK;
883 priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
887 IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, band);
893 * iwl3945_check_rxon_cmd - validate RXON structure is valid
895 * NOTE: This is really only useful during development and can eventually
896 * be #ifdef'd out once the driver is stable and folks aren't actively
899 static int iwl3945_check_rxon_cmd(struct iwl3945_rxon_cmd *rxon)
904 if (rxon->flags & RXON_FLG_BAND_24G_MSK) {
905 error |= le32_to_cpu(rxon->flags &
906 (RXON_FLG_TGJ_NARROW_BAND_MSK |
907 RXON_FLG_RADAR_DETECT_MSK));
909 IWL_WARNING("check 24G fields %d | %d\n",
912 error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ?
913 0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK);
915 IWL_WARNING("check 52 fields %d | %d\n",
917 error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK);
919 IWL_WARNING("check 52 CCK %d | %d\n",
922 error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1;
924 IWL_WARNING("check mac addr %d | %d\n", counter++, error);
926 /* make sure basic rates 6Mbps and 1Mbps are supported */
927 error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) &&
928 ((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0));
930 IWL_WARNING("check basic rate %d | %d\n", counter++, error);
932 error |= (le16_to_cpu(rxon->assoc_id) > 2007);
934 IWL_WARNING("check assoc id %d | %d\n", counter++, error);
936 error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK))
937 == (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK));
939 IWL_WARNING("check CCK and short slot %d | %d\n",
942 error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK))
943 == (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK));
945 IWL_WARNING("check CCK & auto detect %d | %d\n",
948 error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK |
949 RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK);
951 IWL_WARNING("check TGG and auto detect %d | %d\n",
954 if ((rxon->flags & RXON_FLG_DIS_DIV_MSK))
955 error |= ((rxon->flags & (RXON_FLG_ANT_B_MSK |
956 RXON_FLG_ANT_A_MSK)) == 0);
958 IWL_WARNING("check antenna %d %d\n", counter++, error);
961 IWL_WARNING("Tuning to channel %d\n",
962 le16_to_cpu(rxon->channel));
965 IWL_ERROR("Not a valid iwl3945_rxon_assoc_cmd field values\n");
972 * iwl3945_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
973 * @priv: staging_rxon is compared to active_rxon
975 * If the RXON structure is changing enough to require a new tune,
976 * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
977 * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
979 static int iwl3945_full_rxon_required(struct iwl3945_priv *priv)
982 /* These items are only settable from the full RXON command */
983 if (!(priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ||
984 compare_ether_addr(priv->staging_rxon.bssid_addr,
985 priv->active_rxon.bssid_addr) ||
986 compare_ether_addr(priv->staging_rxon.node_addr,
987 priv->active_rxon.node_addr) ||
988 compare_ether_addr(priv->staging_rxon.wlap_bssid_addr,
989 priv->active_rxon.wlap_bssid_addr) ||
990 (priv->staging_rxon.dev_type != priv->active_rxon.dev_type) ||
991 (priv->staging_rxon.channel != priv->active_rxon.channel) ||
992 (priv->staging_rxon.air_propagation !=
993 priv->active_rxon.air_propagation) ||
994 (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id))
997 /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
998 * be updated with the RXON_ASSOC command -- however only some
999 * flag transitions are allowed using RXON_ASSOC */
1001 /* Check if we are not switching bands */
1002 if ((priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) !=
1003 (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK))
1006 /* Check if we are switching association toggle */
1007 if ((priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) !=
1008 (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK))
1014 static int iwl3945_send_rxon_assoc(struct iwl3945_priv *priv)
1017 struct iwl3945_rx_packet *res = NULL;
1018 struct iwl3945_rxon_assoc_cmd rxon_assoc;
1019 struct iwl3945_host_cmd cmd = {
1020 .id = REPLY_RXON_ASSOC,
1021 .len = sizeof(rxon_assoc),
1022 .meta.flags = CMD_WANT_SKB,
1023 .data = &rxon_assoc,
1025 const struct iwl3945_rxon_cmd *rxon1 = &priv->staging_rxon;
1026 const struct iwl3945_rxon_cmd *rxon2 = &priv->active_rxon;
1028 if ((rxon1->flags == rxon2->flags) &&
1029 (rxon1->filter_flags == rxon2->filter_flags) &&
1030 (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
1031 (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
1032 IWL_DEBUG_INFO("Using current RXON_ASSOC. Not resending.\n");
1036 rxon_assoc.flags = priv->staging_rxon.flags;
1037 rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
1038 rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
1039 rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
1040 rxon_assoc.reserved = 0;
1042 rc = iwl3945_send_cmd_sync(priv, &cmd);
1046 res = (struct iwl3945_rx_packet *)cmd.meta.u.skb->data;
1047 if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
1048 IWL_ERROR("Bad return from REPLY_RXON_ASSOC command\n");
1052 priv->alloc_rxb_skb--;
1053 dev_kfree_skb_any(cmd.meta.u.skb);
1059 * iwl3945_commit_rxon - commit staging_rxon to hardware
1061 * The RXON command in staging_rxon is committed to the hardware and
1062 * the active_rxon structure is updated with the new data. This
1063 * function correctly transitions out of the RXON_ASSOC_MSK state if
1064 * a HW tune is required based on the RXON structure changes.
1066 static int iwl3945_commit_rxon(struct iwl3945_priv *priv)
1068 /* cast away the const for active_rxon in this function */
1069 struct iwl3945_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
1071 DECLARE_MAC_BUF(mac);
1073 if (!iwl3945_is_alive(priv))
1076 /* always get timestamp with Rx frame */
1077 priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
1079 /* select antenna */
1080 priv->staging_rxon.flags &=
1081 ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
1082 priv->staging_rxon.flags |= iwl3945_get_antenna_flags(priv);
1084 rc = iwl3945_check_rxon_cmd(&priv->staging_rxon);
1086 IWL_ERROR("Invalid RXON configuration. Not committing.\n");
1090 /* If we don't need to send a full RXON, we can use
1091 * iwl3945_rxon_assoc_cmd which is used to reconfigure filter
1092 * and other flags for the current radio configuration. */
1093 if (!iwl3945_full_rxon_required(priv)) {
1094 rc = iwl3945_send_rxon_assoc(priv);
1096 IWL_ERROR("Error setting RXON_ASSOC "
1097 "configuration (%d).\n", rc);
1101 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
1106 /* If we are currently associated and the new config requires
1107 * an RXON_ASSOC and the new config wants the associated mask enabled,
1108 * we must clear the associated from the active configuration
1109 * before we apply the new config */
1110 if (iwl3945_is_associated(priv) &&
1111 (priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK)) {
1112 IWL_DEBUG_INFO("Toggling associated bit on current RXON\n");
1113 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
1115 rc = iwl3945_send_cmd_pdu(priv, REPLY_RXON,
1116 sizeof(struct iwl3945_rxon_cmd),
1117 &priv->active_rxon);
1119 /* If the mask clearing failed then we set
1120 * active_rxon back to what it was previously */
1122 active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
1123 IWL_ERROR("Error clearing ASSOC_MSK on current "
1124 "configuration (%d).\n", rc);
1129 IWL_DEBUG_INFO("Sending RXON\n"
1130 "* with%s RXON_FILTER_ASSOC_MSK\n"
1133 ((priv->staging_rxon.filter_flags &
1134 RXON_FILTER_ASSOC_MSK) ? "" : "out"),
1135 le16_to_cpu(priv->staging_rxon.channel),
1136 print_mac(mac, priv->staging_rxon.bssid_addr));
1138 /* Apply the new configuration */
1139 rc = iwl3945_send_cmd_pdu(priv, REPLY_RXON,
1140 sizeof(struct iwl3945_rxon_cmd), &priv->staging_rxon);
1142 IWL_ERROR("Error setting new configuration (%d).\n", rc);
1146 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
1148 iwl3945_clear_stations_table(priv);
1150 /* If we issue a new RXON command which required a tune then we must
1151 * send a new TXPOWER command or we won't be able to Tx any frames */
1152 rc = iwl3945_hw_reg_send_txpower(priv);
1154 IWL_ERROR("Error setting Tx power (%d).\n", rc);
1158 /* Add the broadcast address so we can send broadcast frames */
1159 if (iwl3945_add_station(priv, iwl3945_broadcast_addr, 0, 0) ==
1160 IWL_INVALID_STATION) {
1161 IWL_ERROR("Error adding BROADCAST address for transmit.\n");
1165 /* If we have set the ASSOC_MSK and we are in BSS mode then
1166 * add the IWL_AP_ID to the station rate table */
1167 if (iwl3945_is_associated(priv) &&
1168 (priv->iw_mode == IEEE80211_IF_TYPE_STA))
1169 if (iwl3945_add_station(priv, priv->active_rxon.bssid_addr, 1, 0)
1170 == IWL_INVALID_STATION) {
1171 IWL_ERROR("Error adding AP address for transmit.\n");
1175 /* Init the hardware's rate fallback order based on the band */
1176 rc = iwl3945_init_hw_rate_table(priv);
1178 IWL_ERROR("Error setting HW rate table: %02X\n", rc);
1185 static int iwl3945_send_bt_config(struct iwl3945_priv *priv)
1187 struct iwl3945_bt_cmd bt_cmd = {
1195 return iwl3945_send_cmd_pdu(priv, REPLY_BT_CONFIG,
1196 sizeof(struct iwl3945_bt_cmd), &bt_cmd);
1199 static int iwl3945_send_scan_abort(struct iwl3945_priv *priv)
1202 struct iwl3945_rx_packet *res;
1203 struct iwl3945_host_cmd cmd = {
1204 .id = REPLY_SCAN_ABORT_CMD,
1205 .meta.flags = CMD_WANT_SKB,
1208 /* If there isn't a scan actively going on in the hardware
1209 * then we are in between scan bands and not actually
1210 * actively scanning, so don't send the abort command */
1211 if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
1212 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
1216 rc = iwl3945_send_cmd_sync(priv, &cmd);
1218 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
1222 res = (struct iwl3945_rx_packet *)cmd.meta.u.skb->data;
1223 if (res->u.status != CAN_ABORT_STATUS) {
1224 /* The scan abort will return 1 for success or
1225 * 2 for "failure". A failure condition can be
1226 * due to simply not being in an active scan which
1227 * can occur if we send the scan abort before we
1228 * the microcode has notified us that a scan is
1230 IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status);
1231 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
1232 clear_bit(STATUS_SCAN_HW, &priv->status);
1235 dev_kfree_skb_any(cmd.meta.u.skb);
1240 static int iwl3945_card_state_sync_callback(struct iwl3945_priv *priv,
1241 struct iwl3945_cmd *cmd,
1242 struct sk_buff *skb)
1250 * Use: Sets the device's internal card state to enable, disable, or halt
1252 * When in the 'enable' state the card operates as normal.
1253 * When in the 'disable' state, the card enters into a low power mode.
1254 * When in the 'halt' state, the card is shut down and must be fully
1255 * restarted to come back on.
1257 static int iwl3945_send_card_state(struct iwl3945_priv *priv, u32 flags, u8 meta_flag)
1259 struct iwl3945_host_cmd cmd = {
1260 .id = REPLY_CARD_STATE_CMD,
1263 .meta.flags = meta_flag,
1266 if (meta_flag & CMD_ASYNC)
1267 cmd.meta.u.callback = iwl3945_card_state_sync_callback;
1269 return iwl3945_send_cmd(priv, &cmd);
1272 static int iwl3945_add_sta_sync_callback(struct iwl3945_priv *priv,
1273 struct iwl3945_cmd *cmd, struct sk_buff *skb)
1275 struct iwl3945_rx_packet *res = NULL;
1278 IWL_ERROR("Error: Response NULL in REPLY_ADD_STA.\n");
1282 res = (struct iwl3945_rx_packet *)skb->data;
1283 if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
1284 IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n",
1289 switch (res->u.add_sta.status) {
1290 case ADD_STA_SUCCESS_MSK:
1296 /* We didn't cache the SKB; let the caller free it */
1300 int iwl3945_send_add_station(struct iwl3945_priv *priv,
1301 struct iwl3945_addsta_cmd *sta, u8 flags)
1303 struct iwl3945_rx_packet *res = NULL;
1305 struct iwl3945_host_cmd cmd = {
1306 .id = REPLY_ADD_STA,
1307 .len = sizeof(struct iwl3945_addsta_cmd),
1308 .meta.flags = flags,
1312 if (flags & CMD_ASYNC)
1313 cmd.meta.u.callback = iwl3945_add_sta_sync_callback;
1315 cmd.meta.flags |= CMD_WANT_SKB;
1317 rc = iwl3945_send_cmd(priv, &cmd);
1319 if (rc || (flags & CMD_ASYNC))
1322 res = (struct iwl3945_rx_packet *)cmd.meta.u.skb->data;
1323 if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
1324 IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n",
1330 switch (res->u.add_sta.status) {
1331 case ADD_STA_SUCCESS_MSK:
1332 IWL_DEBUG_INFO("REPLY_ADD_STA PASSED\n");
1336 IWL_WARNING("REPLY_ADD_STA failed\n");
1341 priv->alloc_rxb_skb--;
1342 dev_kfree_skb_any(cmd.meta.u.skb);
1347 static int iwl3945_update_sta_key_info(struct iwl3945_priv *priv,
1348 struct ieee80211_key_conf *keyconf,
1351 unsigned long flags;
1352 __le16 key_flags = 0;
1354 switch (keyconf->alg) {
1356 key_flags |= STA_KEY_FLG_CCMP;
1357 key_flags |= cpu_to_le16(
1358 keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
1359 key_flags &= ~STA_KEY_FLG_INVALID;
1366 spin_lock_irqsave(&priv->sta_lock, flags);
1367 priv->stations[sta_id].keyinfo.alg = keyconf->alg;
1368 priv->stations[sta_id].keyinfo.keylen = keyconf->keylen;
1369 memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key,
1372 memcpy(priv->stations[sta_id].sta.key.key, keyconf->key,
1374 priv->stations[sta_id].sta.key.key_flags = key_flags;
1375 priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
1376 priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
1378 spin_unlock_irqrestore(&priv->sta_lock, flags);
1380 IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n");
1381 iwl3945_send_add_station(priv, &priv->stations[sta_id].sta, 0);
1385 static int iwl3945_clear_sta_key_info(struct iwl3945_priv *priv, u8 sta_id)
1387 unsigned long flags;
1389 spin_lock_irqsave(&priv->sta_lock, flags);
1390 memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl3945_hw_key));
1391 memset(&priv->stations[sta_id].sta.key, 0, sizeof(struct iwl3945_keyinfo));
1392 priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
1393 priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
1394 priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
1395 spin_unlock_irqrestore(&priv->sta_lock, flags);
1397 IWL_DEBUG_INFO("hwcrypto: clear ucode station key info\n");
1398 iwl3945_send_add_station(priv, &priv->stations[sta_id].sta, 0);
1402 static void iwl3945_clear_free_frames(struct iwl3945_priv *priv)
1404 struct list_head *element;
1406 IWL_DEBUG_INFO("%d frames on pre-allocated heap on clear.\n",
1407 priv->frames_count);
1409 while (!list_empty(&priv->free_frames)) {
1410 element = priv->free_frames.next;
1412 kfree(list_entry(element, struct iwl3945_frame, list));
1413 priv->frames_count--;
1416 if (priv->frames_count) {
1417 IWL_WARNING("%d frames still in use. Did we lose one?\n",
1418 priv->frames_count);
1419 priv->frames_count = 0;
1423 static struct iwl3945_frame *iwl3945_get_free_frame(struct iwl3945_priv *priv)
1425 struct iwl3945_frame *frame;
1426 struct list_head *element;
1427 if (list_empty(&priv->free_frames)) {
1428 frame = kzalloc(sizeof(*frame), GFP_KERNEL);
1430 IWL_ERROR("Could not allocate frame!\n");
1434 priv->frames_count++;
1438 element = priv->free_frames.next;
1440 return list_entry(element, struct iwl3945_frame, list);
1443 static void iwl3945_free_frame(struct iwl3945_priv *priv, struct iwl3945_frame *frame)
1445 memset(frame, 0, sizeof(*frame));
1446 list_add(&frame->list, &priv->free_frames);
1449 unsigned int iwl3945_fill_beacon_frame(struct iwl3945_priv *priv,
1450 struct ieee80211_hdr *hdr,
1451 const u8 *dest, int left)
1454 if (!iwl3945_is_associated(priv) || !priv->ibss_beacon ||
1455 ((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) &&
1456 (priv->iw_mode != IEEE80211_IF_TYPE_AP)))
1459 if (priv->ibss_beacon->len > left)
1462 memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len);
1464 return priv->ibss_beacon->len;
1467 static u8 iwl3945_rate_get_lowest_plcp(int rate_mask)
1471 for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID;
1472 i = iwl3945_rates[i].next_ieee) {
1473 if (rate_mask & (1 << i))
1474 return iwl3945_rates[i].plcp;
1477 return IWL_RATE_INVALID;
1480 static int iwl3945_send_beacon_cmd(struct iwl3945_priv *priv)
1482 struct iwl3945_frame *frame;
1483 unsigned int frame_size;
1487 frame = iwl3945_get_free_frame(priv);
1490 IWL_ERROR("Could not obtain free frame buffer for beacon "
1495 if (!(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)) {
1496 rate = iwl3945_rate_get_lowest_plcp(priv->active_rate_basic &
1498 if (rate == IWL_INVALID_RATE)
1499 rate = IWL_RATE_6M_PLCP;
1501 rate = iwl3945_rate_get_lowest_plcp(priv->active_rate_basic & 0xF);
1502 if (rate == IWL_INVALID_RATE)
1503 rate = IWL_RATE_1M_PLCP;
1506 frame_size = iwl3945_hw_get_beacon_cmd(priv, frame, rate);
1508 rc = iwl3945_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
1511 iwl3945_free_frame(priv, frame);
1516 /******************************************************************************
1518 * EEPROM related functions
1520 ******************************************************************************/
1522 static void get_eeprom_mac(struct iwl3945_priv *priv, u8 *mac)
1524 memcpy(mac, priv->eeprom.mac_address, 6);
1528 * Clear the OWNER_MSK, to establish driver (instead of uCode running on
1529 * embedded controller) as EEPROM reader; each read is a series of pulses
1530 * to/from the EEPROM chip, not a single event, so even reads could conflict
1531 * if they weren't arbitrated by some ownership mechanism. Here, the driver
1532 * simply claims ownership, which should be safe when this function is called
1533 * (i.e. before loading uCode!).
1535 static inline int iwl3945_eeprom_acquire_semaphore(struct iwl3945_priv *priv)
1537 _iwl3945_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
1542 * iwl3945_eeprom_init - read EEPROM contents
1544 * Load the EEPROM contents from adapter into priv->eeprom
1546 * NOTE: This routine uses the non-debug IO access functions.
1548 int iwl3945_eeprom_init(struct iwl3945_priv *priv)
1550 u16 *e = (u16 *)&priv->eeprom;
1551 u32 gp = iwl3945_read32(priv, CSR_EEPROM_GP);
1553 int sz = sizeof(priv->eeprom);
1558 /* The EEPROM structure has several padding buffers within it
1559 * and when adding new EEPROM maps is subject to programmer errors
1560 * which may be very difficult to identify without explicitly
1561 * checking the resulting size of the eeprom map. */
1562 BUILD_BUG_ON(sizeof(priv->eeprom) != IWL_EEPROM_IMAGE_SIZE);
1564 if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
1565 IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
1569 /* Make sure driver (instead of uCode) is allowed to read EEPROM */
1570 rc = iwl3945_eeprom_acquire_semaphore(priv);
1572 IWL_ERROR("Failed to acquire EEPROM semaphore.\n");
1576 /* eeprom is an array of 16bit values */
1577 for (addr = 0; addr < sz; addr += sizeof(u16)) {
1578 _iwl3945_write32(priv, CSR_EEPROM_REG, addr << 1);
1579 _iwl3945_clear_bit(priv, CSR_EEPROM_REG, CSR_EEPROM_REG_BIT_CMD);
1581 for (i = 0; i < IWL_EEPROM_ACCESS_TIMEOUT;
1582 i += IWL_EEPROM_ACCESS_DELAY) {
1583 r = _iwl3945_read_direct32(priv, CSR_EEPROM_REG);
1584 if (r & CSR_EEPROM_REG_READ_VALID_MSK)
1586 udelay(IWL_EEPROM_ACCESS_DELAY);
1589 if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
1590 IWL_ERROR("Time out reading EEPROM[%d]", addr);
1593 e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
1599 static void iwl3945_unset_hw_setting(struct iwl3945_priv *priv)
1601 if (priv->hw_setting.shared_virt)
1602 pci_free_consistent(priv->pci_dev,
1603 sizeof(struct iwl3945_shared),
1604 priv->hw_setting.shared_virt,
1605 priv->hw_setting.shared_phys);
1609 * iwl3945_supported_rate_to_ie - fill in the supported rate in IE field
1611 * return : set the bit for each supported rate insert in ie
1613 static u16 iwl3945_supported_rate_to_ie(u8 *ie, u16 supported_rate,
1614 u16 basic_rate, int *left)
1616 u16 ret_rates = 0, bit;
1621 for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
1622 if (bit & supported_rate) {
1624 rates[*cnt] = iwl3945_rates[i].ieee |
1625 ((bit & basic_rate) ? 0x80 : 0x00);
1629 (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
1638 * iwl3945_fill_probe_req - fill in all required fields and IE for probe request
1640 static u16 iwl3945_fill_probe_req(struct iwl3945_priv *priv,
1641 struct ieee80211_mgmt *frame,
1642 int left, int is_direct)
1646 u16 active_rates, ret_rates, cck_rates;
1648 /* Make sure there is enough space for the probe request,
1649 * two mandatory IEs and the data */
1655 frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
1656 memcpy(frame->da, iwl3945_broadcast_addr, ETH_ALEN);
1657 memcpy(frame->sa, priv->mac_addr, ETH_ALEN);
1658 memcpy(frame->bssid, iwl3945_broadcast_addr, ETH_ALEN);
1659 frame->seq_ctrl = 0;
1661 /* fill in our indirect SSID IE */
1668 pos = &(frame->u.probe_req.variable[0]);
1669 *pos++ = WLAN_EID_SSID;
1672 /* fill in our direct SSID IE... */
1675 left -= 2 + priv->essid_len;
1678 /* ... fill it in... */
1679 *pos++ = WLAN_EID_SSID;
1680 *pos++ = priv->essid_len;
1681 memcpy(pos, priv->essid, priv->essid_len);
1682 pos += priv->essid_len;
1683 len += 2 + priv->essid_len;
1686 /* fill in supported rate */
1692 /* ... fill it in... */
1693 *pos++ = WLAN_EID_SUPP_RATES;
1696 priv->active_rate = priv->rates_mask;
1697 active_rates = priv->active_rate;
1698 priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
1700 cck_rates = IWL_CCK_RATES_MASK & active_rates;
1701 ret_rates = iwl3945_supported_rate_to_ie(pos, cck_rates,
1702 priv->active_rate_basic, &left);
1703 active_rates &= ~ret_rates;
1705 ret_rates = iwl3945_supported_rate_to_ie(pos, active_rates,
1706 priv->active_rate_basic, &left);
1707 active_rates &= ~ret_rates;
1711 if (active_rates == 0)
1714 /* fill in supported extended rate */
1719 /* ... fill it in... */
1720 *pos++ = WLAN_EID_EXT_SUPP_RATES;
1722 iwl3945_supported_rate_to_ie(pos, active_rates,
1723 priv->active_rate_basic, &left);
1734 static int iwl3945_send_qos_params_command(struct iwl3945_priv *priv,
1735 struct iwl3945_qosparam_cmd *qos)
1738 return iwl3945_send_cmd_pdu(priv, REPLY_QOS_PARAM,
1739 sizeof(struct iwl3945_qosparam_cmd), qos);
1742 static void iwl3945_reset_qos(struct iwl3945_priv *priv)
1748 unsigned long flags;
1751 spin_lock_irqsave(&priv->lock, flags);
1752 priv->qos_data.qos_active = 0;
1754 if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) {
1755 if (priv->qos_data.qos_enable)
1756 priv->qos_data.qos_active = 1;
1757 if (!(priv->active_rate & 0xfff0)) {
1761 } else if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
1762 if (priv->qos_data.qos_enable)
1763 priv->qos_data.qos_active = 1;
1764 } else if (!(priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK)) {
1769 if (priv->qos_data.qos_active)
1772 priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min);
1773 priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max);
1774 priv->qos_data.def_qos_parm.ac[0].aifsn = aifs;
1775 priv->qos_data.def_qos_parm.ac[0].edca_txop = 0;
1776 priv->qos_data.def_qos_parm.ac[0].reserved1 = 0;
1778 if (priv->qos_data.qos_active) {
1780 priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min);
1781 priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max);
1782 priv->qos_data.def_qos_parm.ac[i].aifsn = 7;
1783 priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
1784 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
1787 priv->qos_data.def_qos_parm.ac[i].cw_min =
1788 cpu_to_le16((cw_min + 1) / 2 - 1);
1789 priv->qos_data.def_qos_parm.ac[i].cw_max =
1790 cpu_to_le16(cw_max);
1791 priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
1793 priv->qos_data.def_qos_parm.ac[i].edca_txop =
1796 priv->qos_data.def_qos_parm.ac[i].edca_txop =
1798 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
1801 priv->qos_data.def_qos_parm.ac[i].cw_min =
1802 cpu_to_le16((cw_min + 1) / 4 - 1);
1803 priv->qos_data.def_qos_parm.ac[i].cw_max =
1804 cpu_to_le16((cw_max + 1) / 2 - 1);
1805 priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
1806 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
1808 priv->qos_data.def_qos_parm.ac[i].edca_txop =
1811 priv->qos_data.def_qos_parm.ac[i].edca_txop =
1814 for (i = 1; i < 4; i++) {
1815 priv->qos_data.def_qos_parm.ac[i].cw_min =
1816 cpu_to_le16(cw_min);
1817 priv->qos_data.def_qos_parm.ac[i].cw_max =
1818 cpu_to_le16(cw_max);
1819 priv->qos_data.def_qos_parm.ac[i].aifsn = aifs;
1820 priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
1821 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
1824 IWL_DEBUG_QOS("set QoS to default \n");
1826 spin_unlock_irqrestore(&priv->lock, flags);
1829 static void iwl3945_activate_qos(struct iwl3945_priv *priv, u8 force)
1831 unsigned long flags;
1833 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
1836 if (!priv->qos_data.qos_enable)
1839 spin_lock_irqsave(&priv->lock, flags);
1840 priv->qos_data.def_qos_parm.qos_flags = 0;
1842 if (priv->qos_data.qos_cap.q_AP.queue_request &&
1843 !priv->qos_data.qos_cap.q_AP.txop_request)
1844 priv->qos_data.def_qos_parm.qos_flags |=
1845 QOS_PARAM_FLG_TXOP_TYPE_MSK;
1847 if (priv->qos_data.qos_active)
1848 priv->qos_data.def_qos_parm.qos_flags |=
1849 QOS_PARAM_FLG_UPDATE_EDCA_MSK;
1851 spin_unlock_irqrestore(&priv->lock, flags);
1853 if (force || iwl3945_is_associated(priv)) {
1854 IWL_DEBUG_QOS("send QoS cmd with Qos active %d \n",
1855 priv->qos_data.qos_active);
1857 iwl3945_send_qos_params_command(priv,
1858 &(priv->qos_data.def_qos_parm));
1863 * Power management (not Tx power!) functions
1865 #define MSEC_TO_USEC 1024
1867 #define NOSLP __constant_cpu_to_le32(0)
1868 #define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK
1869 #define SLP_TIMEOUT(T) __constant_cpu_to_le32((T) * MSEC_TO_USEC)
1870 #define SLP_VEC(X0, X1, X2, X3, X4) {__constant_cpu_to_le32(X0), \
1871 __constant_cpu_to_le32(X1), \
1872 __constant_cpu_to_le32(X2), \
1873 __constant_cpu_to_le32(X3), \
1874 __constant_cpu_to_le32(X4)}
1877 /* default power management (not Tx power) table values */
1879 static struct iwl3945_power_vec_entry range_0[IWL_POWER_AC] = {
1880 {{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
1881 {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
1882 {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(300), SLP_VEC(2, 4, 6, 7, 7)}, 0},
1883 {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(100), SLP_VEC(2, 6, 9, 9, 10)}, 0},
1884 {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 10)}, 1},
1885 {{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25), SLP_VEC(4, 7, 10, 10, 10)}, 1}
1889 static struct iwl3945_power_vec_entry range_1[IWL_POWER_AC] = {
1890 {{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
1891 {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500),
1892 SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
1893 {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(300),
1894 SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
1895 {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(100),
1896 SLP_VEC(2, 6, 9, 9, 0xFF)}, 0},
1897 {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
1898 {{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25),
1899 SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
1902 int iwl3945_power_init_handle(struct iwl3945_priv *priv)
1905 struct iwl3945_power_mgr *pow_data;
1906 int size = sizeof(struct iwl3945_power_vec_entry) * IWL_POWER_AC;
1909 IWL_DEBUG_POWER("Initialize power \n");
1911 pow_data = &(priv->power_data);
1913 memset(pow_data, 0, sizeof(*pow_data));
1915 pow_data->active_index = IWL_POWER_RANGE_0;
1916 pow_data->dtim_val = 0xffff;
1918 memcpy(&pow_data->pwr_range_0[0], &range_0[0], size);
1919 memcpy(&pow_data->pwr_range_1[0], &range_1[0], size);
1921 rc = pci_read_config_word(priv->pci_dev, PCI_LINK_CTRL, &pci_pm);
1925 struct iwl3945_powertable_cmd *cmd;
1927 IWL_DEBUG_POWER("adjust power command flags\n");
1929 for (i = 0; i < IWL_POWER_AC; i++) {
1930 cmd = &pow_data->pwr_range_0[i].cmd;
1933 cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
1935 cmd->flags |= IWL_POWER_PCI_PM_MSK;
1941 static int iwl3945_update_power_cmd(struct iwl3945_priv *priv,
1942 struct iwl3945_powertable_cmd *cmd, u32 mode)
1947 struct iwl3945_power_vec_entry *range;
1949 struct iwl3945_power_mgr *pow_data;
1951 if (mode > IWL_POWER_INDEX_5) {
1952 IWL_DEBUG_POWER("Error invalid power mode \n");
1955 pow_data = &(priv->power_data);
1957 if (pow_data->active_index == IWL_POWER_RANGE_0)
1958 range = &pow_data->pwr_range_0[0];
1960 range = &pow_data->pwr_range_1[1];
1962 memcpy(cmd, &range[mode].cmd, sizeof(struct iwl3945_powertable_cmd));
1964 #ifdef IWL_MAC80211_DISABLE
1965 if (priv->assoc_network != NULL) {
1966 unsigned long flags;
1968 period = priv->assoc_network->tim.tim_period;
1970 #endif /*IWL_MAC80211_DISABLE */
1971 skip = range[mode].no_dtim;
1980 cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
1982 __le32 slp_itrvl = cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1];
1983 max_sleep = (le32_to_cpu(slp_itrvl) / period) * period;
1984 cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
1987 for (i = 0; i < IWL_POWER_VEC_SIZE; i++) {
1988 if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep)
1989 cmd->sleep_interval[i] = cpu_to_le32(max_sleep);
1992 IWL_DEBUG_POWER("Flags value = 0x%08X\n", cmd->flags);
1993 IWL_DEBUG_POWER("Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
1994 IWL_DEBUG_POWER("Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
1995 IWL_DEBUG_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n",
1996 le32_to_cpu(cmd->sleep_interval[0]),
1997 le32_to_cpu(cmd->sleep_interval[1]),
1998 le32_to_cpu(cmd->sleep_interval[2]),
1999 le32_to_cpu(cmd->sleep_interval[3]),
2000 le32_to_cpu(cmd->sleep_interval[4]));
2005 static int iwl3945_send_power_mode(struct iwl3945_priv *priv, u32 mode)
2007 u32 uninitialized_var(final_mode);
2009 struct iwl3945_powertable_cmd cmd;
2011 /* If on battery, set to 3,
2012 * if plugged into AC power, set to CAM ("continuously aware mode"),
2013 * else user level */
2015 case IWL_POWER_BATTERY:
2016 final_mode = IWL_POWER_INDEX_3;
2019 final_mode = IWL_POWER_MODE_CAM;
2026 iwl3945_update_power_cmd(priv, &cmd, final_mode);
2028 rc = iwl3945_send_cmd_pdu(priv, POWER_TABLE_CMD, sizeof(cmd), &cmd);
2030 if (final_mode == IWL_POWER_MODE_CAM)
2031 clear_bit(STATUS_POWER_PMI, &priv->status);
2033 set_bit(STATUS_POWER_PMI, &priv->status);
2038 int iwl3945_is_network_packet(struct iwl3945_priv *priv, struct ieee80211_hdr *header)
2040 /* Filter incoming packets to determine if they are targeted toward
2041 * this network, discarding packets coming from ourselves */
2042 switch (priv->iw_mode) {
2043 case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */
2044 /* packets from our adapter are dropped (echo) */
2045 if (!compare_ether_addr(header->addr2, priv->mac_addr))
2047 /* {broad,multi}cast packets to our IBSS go through */
2048 if (is_multicast_ether_addr(header->addr1))
2049 return !compare_ether_addr(header->addr3, priv->bssid);
2050 /* packets to our adapter go through */
2051 return !compare_ether_addr(header->addr1, priv->mac_addr);
2052 case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */
2053 /* packets from our adapter are dropped (echo) */
2054 if (!compare_ether_addr(header->addr3, priv->mac_addr))
2056 /* {broad,multi}cast packets to our BSS go through */
2057 if (is_multicast_ether_addr(header->addr1))
2058 return !compare_ether_addr(header->addr2, priv->bssid);
2059 /* packets to our adapter go through */
2060 return !compare_ether_addr(header->addr1, priv->mac_addr);
2069 * iwl3945_scan_cancel - Cancel any currently executing HW scan
2071 * NOTE: priv->mutex is not required before calling this function
2073 static int iwl3945_scan_cancel(struct iwl3945_priv *priv)
2075 if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
2076 clear_bit(STATUS_SCANNING, &priv->status);
2080 if (test_bit(STATUS_SCANNING, &priv->status)) {
2081 if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
2082 IWL_DEBUG_SCAN("Queuing scan abort.\n");
2083 set_bit(STATUS_SCAN_ABORTING, &priv->status);
2084 queue_work(priv->workqueue, &priv->abort_scan);
2087 IWL_DEBUG_SCAN("Scan abort already in progress.\n");
2089 return test_bit(STATUS_SCANNING, &priv->status);
2096 * iwl3945_scan_cancel_timeout - Cancel any currently executing HW scan
2097 * @ms: amount of time to wait (in milliseconds) for scan to abort
2099 * NOTE: priv->mutex must be held before calling this function
2101 static int iwl3945_scan_cancel_timeout(struct iwl3945_priv *priv, unsigned long ms)
2103 unsigned long now = jiffies;
2106 ret = iwl3945_scan_cancel(priv);
2108 mutex_unlock(&priv->mutex);
2109 while (!time_after(jiffies, now + msecs_to_jiffies(ms)) &&
2110 test_bit(STATUS_SCANNING, &priv->status))
2112 mutex_lock(&priv->mutex);
2114 return test_bit(STATUS_SCANNING, &priv->status);
2120 static void iwl3945_sequence_reset(struct iwl3945_priv *priv)
2122 /* Reset ieee stats */
2124 /* We don't reset the net_device_stats (ieee->stats) on
2127 priv->last_seq_num = -1;
2128 priv->last_frag_num = -1;
2129 priv->last_packet_time = 0;
2131 iwl3945_scan_cancel(priv);
2134 #define MAX_UCODE_BEACON_INTERVAL 1024
2135 #define INTEL_CONN_LISTEN_INTERVAL __constant_cpu_to_le16(0xA)
2137 static __le16 iwl3945_adjust_beacon_interval(u16 beacon_val)
2140 u16 beacon_factor = 0;
2143 (beacon_val + MAX_UCODE_BEACON_INTERVAL)
2144 / MAX_UCODE_BEACON_INTERVAL;
2145 new_val = beacon_val / beacon_factor;
2147 return cpu_to_le16(new_val);
2150 static void iwl3945_setup_rxon_timing(struct iwl3945_priv *priv)
2152 u64 interval_tm_unit;
2154 unsigned long flags;
2155 struct ieee80211_conf *conf = NULL;
2158 conf = ieee80211_get_hw_conf(priv->hw);
2160 spin_lock_irqsave(&priv->lock, flags);
2161 priv->rxon_timing.timestamp.dw[1] = cpu_to_le32(priv->timestamp1);
2162 priv->rxon_timing.timestamp.dw[0] = cpu_to_le32(priv->timestamp0);
2164 priv->rxon_timing.listen_interval = INTEL_CONN_LISTEN_INTERVAL;
2166 tsf = priv->timestamp1;
2167 tsf = ((tsf << 32) | priv->timestamp0);
2169 beacon_int = priv->beacon_int;
2170 spin_unlock_irqrestore(&priv->lock, flags);
2172 if (priv->iw_mode == IEEE80211_IF_TYPE_STA) {
2173 if (beacon_int == 0) {
2174 priv->rxon_timing.beacon_interval = cpu_to_le16(100);
2175 priv->rxon_timing.beacon_init_val = cpu_to_le32(102400);
2177 priv->rxon_timing.beacon_interval =
2178 cpu_to_le16(beacon_int);
2179 priv->rxon_timing.beacon_interval =
2180 iwl3945_adjust_beacon_interval(
2181 le16_to_cpu(priv->rxon_timing.beacon_interval));
2184 priv->rxon_timing.atim_window = 0;
2186 priv->rxon_timing.beacon_interval =
2187 iwl3945_adjust_beacon_interval(conf->beacon_int);
2188 /* TODO: we need to get atim_window from upper stack
2189 * for now we set to 0 */
2190 priv->rxon_timing.atim_window = 0;
2194 (le16_to_cpu(priv->rxon_timing.beacon_interval) * 1024);
2195 result = do_div(tsf, interval_tm_unit);
2196 priv->rxon_timing.beacon_init_val =
2197 cpu_to_le32((u32) ((u64) interval_tm_unit - result));
2200 ("beacon interval %d beacon timer %d beacon tim %d\n",
2201 le16_to_cpu(priv->rxon_timing.beacon_interval),
2202 le32_to_cpu(priv->rxon_timing.beacon_init_val),
2203 le16_to_cpu(priv->rxon_timing.atim_window));
2206 static int iwl3945_scan_initiate(struct iwl3945_priv *priv)
2208 if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
2209 IWL_ERROR("APs don't scan.\n");
2213 if (!iwl3945_is_ready_rf(priv)) {
2214 IWL_DEBUG_SCAN("Aborting scan due to not ready.\n");
2218 if (test_bit(STATUS_SCANNING, &priv->status)) {
2219 IWL_DEBUG_SCAN("Scan already in progress.\n");
2223 if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
2224 IWL_DEBUG_SCAN("Scan request while abort pending. "
2229 IWL_DEBUG_INFO("Starting scan...\n");
2230 if (priv->cfg->sku & IWL_SKU_G)
2231 priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
2232 if (priv->cfg->sku & IWL_SKU_A)
2233 priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
2234 set_bit(STATUS_SCANNING, &priv->status);
2235 priv->scan_start = jiffies;
2236 priv->scan_pass_start = priv->scan_start;
2238 queue_work(priv->workqueue, &priv->request_scan);
2243 static int iwl3945_set_rxon_hwcrypto(struct iwl3945_priv *priv, int hw_decrypt)
2245 struct iwl3945_rxon_cmd *rxon = &priv->staging_rxon;
2248 rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK;
2250 rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
2255 static void iwl3945_set_flags_for_phymode(struct iwl3945_priv *priv,
2256 enum ieee80211_band band)
2258 if (band == IEEE80211_BAND_5GHZ) {
2259 priv->staging_rxon.flags &=
2260 ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK
2261 | RXON_FLG_CCK_MSK);
2262 priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
2264 /* Copied from iwl3945_bg_post_associate() */
2265 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
2266 priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
2268 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2270 if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
2271 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2273 priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
2274 priv->staging_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK;
2275 priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK;
2280 * initialize rxon structure with default values from eeprom
2282 static void iwl3945_connection_init_rx_config(struct iwl3945_priv *priv)
2284 const struct iwl3945_channel_info *ch_info;
2286 memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon));
2288 switch (priv->iw_mode) {
2289 case IEEE80211_IF_TYPE_AP:
2290 priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP;
2293 case IEEE80211_IF_TYPE_STA:
2294 priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS;
2295 priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK;
2298 case IEEE80211_IF_TYPE_IBSS:
2299 priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS;
2300 priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK;
2301 priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK |
2302 RXON_FILTER_ACCEPT_GRP_MSK;
2305 case IEEE80211_IF_TYPE_MNTR:
2306 priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER;
2307 priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK |
2308 RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK;
2311 IWL_ERROR("Unsupported interface type %d\n", priv->iw_mode);
2316 /* TODO: Figure out when short_preamble would be set and cache from
2318 if (!hw_to_local(priv->hw)->short_preamble)
2319 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2321 priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2324 ch_info = iwl3945_get_channel_info(priv, priv->band,
2325 le16_to_cpu(priv->staging_rxon.channel));
2328 ch_info = &priv->channel_info[0];
2331 * in some case A channels are all non IBSS
2332 * in this case force B/G channel
2334 if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
2335 !(is_channel_ibss(ch_info)))
2336 ch_info = &priv->channel_info[0];
2338 priv->staging_rxon.channel = cpu_to_le16(ch_info->channel);
2339 if (is_channel_a_band(ch_info))
2340 priv->band = IEEE80211_BAND_5GHZ;
2342 priv->band = IEEE80211_BAND_2GHZ;
2344 iwl3945_set_flags_for_phymode(priv, priv->band);
2346 priv->staging_rxon.ofdm_basic_rates =
2347 (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
2348 priv->staging_rxon.cck_basic_rates =
2349 (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
2352 static int iwl3945_set_mode(struct iwl3945_priv *priv, int mode)
2354 if (mode == IEEE80211_IF_TYPE_IBSS) {
2355 const struct iwl3945_channel_info *ch_info;
2357 ch_info = iwl3945_get_channel_info(priv,
2359 le16_to_cpu(priv->staging_rxon.channel));
2361 if (!ch_info || !is_channel_ibss(ch_info)) {
2362 IWL_ERROR("channel %d not IBSS channel\n",
2363 le16_to_cpu(priv->staging_rxon.channel));
2368 priv->iw_mode = mode;
2370 iwl3945_connection_init_rx_config(priv);
2371 memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
2373 iwl3945_clear_stations_table(priv);
2375 /* dont commit rxon if rf-kill is on*/
2376 if (!iwl3945_is_ready_rf(priv))
2379 cancel_delayed_work(&priv->scan_check);
2380 if (iwl3945_scan_cancel_timeout(priv, 100)) {
2381 IWL_WARNING("Aborted scan still in progress after 100ms\n");
2382 IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
2386 iwl3945_commit_rxon(priv);
2391 static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv,
2392 struct ieee80211_tx_control *ctl,
2393 struct iwl3945_cmd *cmd,
2394 struct sk_buff *skb_frag,
2397 struct iwl3945_hw_key *keyinfo = &priv->stations[ctl->key_idx].keyinfo;
2399 switch (keyinfo->alg) {
2401 cmd->cmd.tx.sec_ctl = TX_CMD_SEC_CCM;
2402 memcpy(cmd->cmd.tx.key, keyinfo->key, keyinfo->keylen);
2403 IWL_DEBUG_TX("tx_cmd with aes hwcrypto\n");
2408 cmd->cmd.tx.sec_ctl = TX_CMD_SEC_TKIP;
2411 memcpy(cmd->cmd.tx.tkip_mic.byte, skb_frag->tail - 8,
2414 memset(cmd->cmd.tx.tkip_mic.byte, 0, 8);
2419 cmd->cmd.tx.sec_ctl = TX_CMD_SEC_WEP |
2420 (ctl->key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
2422 if (keyinfo->keylen == 13)
2423 cmd->cmd.tx.sec_ctl |= TX_CMD_SEC_KEY128;
2425 memcpy(&cmd->cmd.tx.key[3], keyinfo->key, keyinfo->keylen);
2427 IWL_DEBUG_TX("Configuring packet for WEP encryption "
2428 "with key %d\n", ctl->key_idx);
2432 printk(KERN_ERR "Unknown encode alg %d\n", keyinfo->alg);
2438 * handle build REPLY_TX command notification.
2440 static void iwl3945_build_tx_cmd_basic(struct iwl3945_priv *priv,
2441 struct iwl3945_cmd *cmd,
2442 struct ieee80211_tx_control *ctrl,
2443 struct ieee80211_hdr *hdr,
2444 int is_unicast, u8 std_id)
2447 u16 fc = le16_to_cpu(hdr->frame_control);
2448 __le32 tx_flags = cmd->cmd.tx.tx_flags;
2450 cmd->cmd.tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2451 if (!(ctrl->flags & IEEE80211_TXCTL_NO_ACK)) {
2452 tx_flags |= TX_CMD_FLG_ACK_MSK;
2453 if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)
2454 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
2455 if (ieee80211_is_probe_response(fc) &&
2456 !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
2457 tx_flags |= TX_CMD_FLG_TSF_MSK;
2459 tx_flags &= (~TX_CMD_FLG_ACK_MSK);
2460 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
2463 cmd->cmd.tx.sta_id = std_id;
2464 if (ieee80211_get_morefrag(hdr))
2465 tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
2467 qc = ieee80211_get_qos_ctrl(hdr);
2469 cmd->cmd.tx.tid_tspec = (u8) (le16_to_cpu(*qc) & 0xf);
2470 tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
2472 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
2474 if (ctrl->flags & IEEE80211_TXCTL_USE_RTS_CTS) {
2475 tx_flags |= TX_CMD_FLG_RTS_MSK;
2476 tx_flags &= ~TX_CMD_FLG_CTS_MSK;
2477 } else if (ctrl->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) {
2478 tx_flags &= ~TX_CMD_FLG_RTS_MSK;
2479 tx_flags |= TX_CMD_FLG_CTS_MSK;
2482 if ((tx_flags & TX_CMD_FLG_RTS_MSK) || (tx_flags & TX_CMD_FLG_CTS_MSK))
2483 tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
2485 tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
2486 if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) {
2487 if ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_ASSOC_REQ ||
2488 (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_REASSOC_REQ)
2489 cmd->cmd.tx.timeout.pm_frame_timeout = cpu_to_le16(3);
2491 cmd->cmd.tx.timeout.pm_frame_timeout = cpu_to_le16(2);
2493 cmd->cmd.tx.timeout.pm_frame_timeout = 0;
2494 #ifdef CONFIG_IWL3945_LEDS
2495 priv->rxtxpackets += le16_to_cpu(cmd->cmd.tx.len);
2499 cmd->cmd.tx.driver_txop = 0;
2500 cmd->cmd.tx.tx_flags = tx_flags;
2501 cmd->cmd.tx.next_frame_len = 0;
2505 * iwl3945_get_sta_id - Find station's index within station table
2507 static int iwl3945_get_sta_id(struct iwl3945_priv *priv, struct ieee80211_hdr *hdr)
2510 u16 fc = le16_to_cpu(hdr->frame_control);
2512 /* If this frame is broadcast or management, use broadcast station id */
2513 if (((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA) ||
2514 is_multicast_ether_addr(hdr->addr1))
2515 return priv->hw_setting.bcast_sta_id;
2517 switch (priv->iw_mode) {
2519 /* If we are a client station in a BSS network, use the special
2520 * AP station entry (that's the only station we communicate with) */
2521 case IEEE80211_IF_TYPE_STA:
2524 /* If we are an AP, then find the station, or use BCAST */
2525 case IEEE80211_IF_TYPE_AP:
2526 sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
2527 if (sta_id != IWL_INVALID_STATION)
2529 return priv->hw_setting.bcast_sta_id;
2531 /* If this frame is going out to an IBSS network, find the station,
2532 * or create a new station table entry */
2533 case IEEE80211_IF_TYPE_IBSS: {
2534 DECLARE_MAC_BUF(mac);
2536 /* Create new station table entry */
2537 sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
2538 if (sta_id != IWL_INVALID_STATION)
2541 sta_id = iwl3945_add_station(priv, hdr->addr1, 0, CMD_ASYNC);
2543 if (sta_id != IWL_INVALID_STATION)
2546 IWL_DEBUG_DROP("Station %s not in station map. "
2547 "Defaulting to broadcast...\n",
2548 print_mac(mac, hdr->addr1));
2549 iwl3945_print_hex_dump(IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr));
2550 return priv->hw_setting.bcast_sta_id;
2553 IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
2554 return priv->hw_setting.bcast_sta_id;
2559 * start REPLY_TX command process
2561 static int iwl3945_tx_skb(struct iwl3945_priv *priv,
2562 struct sk_buff *skb, struct ieee80211_tx_control *ctl)
2564 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
2565 struct iwl3945_tfd_frame *tfd;
2567 int txq_id = ctl->queue;
2568 struct iwl3945_tx_queue *txq = NULL;
2569 struct iwl3945_queue *q = NULL;
2570 dma_addr_t phys_addr;
2571 dma_addr_t txcmd_phys;
2572 struct iwl3945_cmd *out_cmd = NULL;
2573 u16 len, idx, len_org;
2574 u8 id, hdr_len, unicast;
2579 u8 wait_write_ptr = 0;
2580 unsigned long flags;
2583 spin_lock_irqsave(&priv->lock, flags);
2584 if (iwl3945_is_rfkill(priv)) {
2585 IWL_DEBUG_DROP("Dropping - RF KILL\n");
2590 IWL_DEBUG_DROP("Dropping - !priv->vif\n");
2594 if ((ctl->tx_rate->hw_value & 0xFF) == IWL_INVALID_RATE) {
2595 IWL_ERROR("ERROR: No TX rate available.\n");
2599 unicast = !is_multicast_ether_addr(hdr->addr1);
2602 fc = le16_to_cpu(hdr->frame_control);
2604 #ifdef CONFIG_IWL3945_DEBUG
2605 if (ieee80211_is_auth(fc))
2606 IWL_DEBUG_TX("Sending AUTH frame\n");
2607 else if (ieee80211_is_assoc_request(fc))
2608 IWL_DEBUG_TX("Sending ASSOC frame\n");
2609 else if (ieee80211_is_reassoc_request(fc))
2610 IWL_DEBUG_TX("Sending REASSOC frame\n");
2613 /* drop all data frame if we are not associated */
2614 if ((!iwl3945_is_associated(priv) ||
2615 ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id)) &&
2616 ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA)) {
2617 IWL_DEBUG_DROP("Dropping - !iwl3945_is_associated\n");
2621 spin_unlock_irqrestore(&priv->lock, flags);
2623 hdr_len = ieee80211_get_hdrlen(fc);
2625 /* Find (or create) index into station table for destination station */
2626 sta_id = iwl3945_get_sta_id(priv, hdr);
2627 if (sta_id == IWL_INVALID_STATION) {
2628 DECLARE_MAC_BUF(mac);
2630 IWL_DEBUG_DROP("Dropping - INVALID STATION: %s\n",
2631 print_mac(mac, hdr->addr1));
2635 IWL_DEBUG_RATE("station Id %d\n", sta_id);
2637 qc = ieee80211_get_qos_ctrl(hdr);
2639 u8 tid = (u8)(le16_to_cpu(*qc) & 0xf);
2640 seq_number = priv->stations[sta_id].tid[tid].seq_number &
2642 hdr->seq_ctrl = cpu_to_le16(seq_number) |
2644 __constant_cpu_to_le16(IEEE80211_SCTL_FRAG));
2648 /* Descriptor for chosen Tx queue */
2649 txq = &priv->txq[txq_id];
2652 spin_lock_irqsave(&priv->lock, flags);
2654 /* Set up first empty TFD within this queue's circular TFD buffer */
2655 tfd = &txq->bd[q->write_ptr];
2656 memset(tfd, 0, sizeof(*tfd));
2657 control_flags = (u32 *) tfd;
2658 idx = get_cmd_index(q, q->write_ptr, 0);
2660 /* Set up driver data for this TFD */
2661 memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl3945_tx_info));
2662 txq->txb[q->write_ptr].skb[0] = skb;
2663 memcpy(&(txq->txb[q->write_ptr].status.control),
2664 ctl, sizeof(struct ieee80211_tx_control));
2666 /* Init first empty entry in queue's array of Tx/cmd buffers */
2667 out_cmd = &txq->cmd[idx];
2668 memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
2669 memset(&out_cmd->cmd.tx, 0, sizeof(out_cmd->cmd.tx));
2672 * Set up the Tx-command (not MAC!) header.
2673 * Store the chosen Tx queue and TFD index within the sequence field;
2674 * after Tx, uCode's Tx response will return this value so driver can
2675 * locate the frame within the tx queue and do post-tx processing.
2677 out_cmd->hdr.cmd = REPLY_TX;
2678 out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
2679 INDEX_TO_SEQ(q->write_ptr)));
2681 /* Copy MAC header from skb into command buffer */
2682 memcpy(out_cmd->cmd.tx.hdr, hdr, hdr_len);
2685 * Use the first empty entry in this queue's command buffer array
2686 * to contain the Tx command and MAC header concatenated together
2687 * (payload data will be in another buffer).
2688 * Size of this varies, due to varying MAC header length.
2689 * If end is not dword aligned, we'll have 2 extra bytes at the end
2690 * of the MAC header (device reads on dword boundaries).
2691 * We'll tell device about this padding later.
2693 len = priv->hw_setting.tx_cmd_len +
2694 sizeof(struct iwl3945_cmd_header) + hdr_len;
2697 len = (len + 3) & ~3;
2704 /* Physical address of this Tx command's header (not MAC header!),
2705 * within command buffer array. */
2706 txcmd_phys = txq->dma_addr_cmd + sizeof(struct iwl3945_cmd) * idx +
2707 offsetof(struct iwl3945_cmd, hdr);
2709 /* Add buffer containing Tx command and MAC(!) header to TFD's
2711 iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
2713 if (!(ctl->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT))
2714 iwl3945_build_tx_cmd_hwcrypto(priv, ctl, out_cmd, skb, 0);
2716 /* Set up TFD's 2nd entry to point directly to remainder of skb,
2717 * if any (802.11 null frames have no payload). */
2718 len = skb->len - hdr_len;
2720 phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
2721 len, PCI_DMA_TODEVICE);
2722 iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, len);
2726 /* If there is no payload, then we use only one Tx buffer */
2727 *control_flags = TFD_CTL_COUNT_SET(1);
2729 /* Else use 2 buffers.
2730 * Tell 3945 about any padding after MAC header */
2731 *control_flags = TFD_CTL_COUNT_SET(2) |
2732 TFD_CTL_PAD_SET(U32_PAD(len));
2734 /* Total # bytes to be transmitted */
2735 len = (u16)skb->len;
2736 out_cmd->cmd.tx.len = cpu_to_le16(len);
2738 /* TODO need this for burst mode later on */
2739 iwl3945_build_tx_cmd_basic(priv, out_cmd, ctl, hdr, unicast, sta_id);
2741 /* set is_hcca to 0; it probably will never be implemented */
2742 iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, ctl, hdr, sta_id, 0);
2744 out_cmd->cmd.tx.tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
2745 out_cmd->cmd.tx.tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
2747 if (!ieee80211_get_morefrag(hdr)) {
2748 txq->need_update = 1;
2750 u8 tid = (u8)(le16_to_cpu(*qc) & 0xf);
2751 priv->stations[sta_id].tid[tid].seq_number = seq_number;
2755 txq->need_update = 0;
2758 iwl3945_print_hex_dump(IWL_DL_TX, out_cmd->cmd.payload,
2759 sizeof(out_cmd->cmd.tx));
2761 iwl3945_print_hex_dump(IWL_DL_TX, (u8 *)out_cmd->cmd.tx.hdr,
2762 ieee80211_get_hdrlen(fc));
2764 /* Tell device the write index *just past* this latest filled TFD */
2765 q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
2766 rc = iwl3945_tx_queue_update_write_ptr(priv, txq);
2767 spin_unlock_irqrestore(&priv->lock, flags);
2772 if ((iwl3945_queue_space(q) < q->high_mark)
2773 && priv->mac80211_registered) {
2774 if (wait_write_ptr) {
2775 spin_lock_irqsave(&priv->lock, flags);
2776 txq->need_update = 1;
2777 iwl3945_tx_queue_update_write_ptr(priv, txq);
2778 spin_unlock_irqrestore(&priv->lock, flags);
2781 ieee80211_stop_queue(priv->hw, ctl->queue);
2787 spin_unlock_irqrestore(&priv->lock, flags);
2792 static void iwl3945_set_rate(struct iwl3945_priv *priv)
2794 const struct ieee80211_supported_band *sband = NULL;
2795 struct ieee80211_rate *rate;
2798 sband = iwl3945_get_band(priv, priv->band);
2800 IWL_ERROR("Failed to set rate: unable to get hw mode\n");
2804 priv->active_rate = 0;
2805 priv->active_rate_basic = 0;
2807 IWL_DEBUG_RATE("Setting rates for %s GHz\n",
2808 sband->band == IEEE80211_BAND_2GHZ ? "2.4" : "5");
2810 for (i = 0; i < sband->n_bitrates; i++) {
2811 rate = &sband->bitrates[i];
2812 if ((rate->hw_value < IWL_RATE_COUNT) &&
2813 !(rate->flags & IEEE80211_CHAN_DISABLED)) {
2814 IWL_DEBUG_RATE("Adding rate index %d (plcp %d)\n",
2815 rate->hw_value, iwl3945_rates[rate->hw_value].plcp);
2816 priv->active_rate |= (1 << rate->hw_value);
2820 IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n",
2821 priv->active_rate, priv->active_rate_basic);
2824 * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK)
2825 * otherwise set it to the default of all CCK rates and 6, 12, 24 for
2828 if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK)
2829 priv->staging_rxon.cck_basic_rates =
2830 ((priv->active_rate_basic &
2831 IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF;
2833 priv->staging_rxon.cck_basic_rates =
2834 (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
2836 if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK)
2837 priv->staging_rxon.ofdm_basic_rates =
2838 ((priv->active_rate_basic &
2839 (IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >>
2840 IWL_FIRST_OFDM_RATE) & 0xFF;
2842 priv->staging_rxon.ofdm_basic_rates =
2843 (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
2846 static void iwl3945_radio_kill_sw(struct iwl3945_priv *priv, int disable_radio)
2848 unsigned long flags;
2850 if (!!disable_radio == test_bit(STATUS_RF_KILL_SW, &priv->status))
2853 IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO %s\n",
2854 disable_radio ? "OFF" : "ON");
2856 if (disable_radio) {
2857 iwl3945_scan_cancel(priv);
2858 /* FIXME: This is a workaround for AP */
2859 if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
2860 spin_lock_irqsave(&priv->lock, flags);
2861 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_SET,
2862 CSR_UCODE_SW_BIT_RFKILL);
2863 spin_unlock_irqrestore(&priv->lock, flags);
2864 iwl3945_send_card_state(priv, CARD_STATE_CMD_DISABLE, 0);
2865 set_bit(STATUS_RF_KILL_SW, &priv->status);
2870 spin_lock_irqsave(&priv->lock, flags);
2871 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2873 clear_bit(STATUS_RF_KILL_SW, &priv->status);
2874 spin_unlock_irqrestore(&priv->lock, flags);
2879 spin_lock_irqsave(&priv->lock, flags);
2880 iwl3945_read32(priv, CSR_UCODE_DRV_GP1);
2881 if (!iwl3945_grab_nic_access(priv))
2882 iwl3945_release_nic_access(priv);
2883 spin_unlock_irqrestore(&priv->lock, flags);
2885 if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
2886 IWL_DEBUG_RF_KILL("Can not turn radio back on - "
2887 "disabled by HW switch\n");
2891 queue_work(priv->workqueue, &priv->restart);
2895 void iwl3945_set_decrypted_flag(struct iwl3945_priv *priv, struct sk_buff *skb,
2896 u32 decrypt_res, struct ieee80211_rx_status *stats)
2899 le16_to_cpu(((struct ieee80211_hdr *)skb->data)->frame_control);
2901 if (priv->active_rxon.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK)
2904 if (!(fc & IEEE80211_FCTL_PROTECTED))
2907 IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res);
2908 switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) {
2909 case RX_RES_STATUS_SEC_TYPE_TKIP:
2910 if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
2911 RX_RES_STATUS_BAD_ICV_MIC)
2912 stats->flag |= RX_FLAG_MMIC_ERROR;
2913 case RX_RES_STATUS_SEC_TYPE_WEP:
2914 case RX_RES_STATUS_SEC_TYPE_CCMP:
2915 if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
2916 RX_RES_STATUS_DECRYPT_OK) {
2917 IWL_DEBUG_RX("hw decrypt successfully!!!\n");
2918 stats->flag |= RX_FLAG_DECRYPTED;
2927 #define IWL_PACKET_RETRY_TIME HZ
2929 int iwl3945_is_duplicate_packet(struct iwl3945_priv *priv, struct ieee80211_hdr *header)
2931 u16 sc = le16_to_cpu(header->seq_ctrl);
2932 u16 seq = (sc & IEEE80211_SCTL_SEQ) >> 4;
2933 u16 frag = sc & IEEE80211_SCTL_FRAG;
2934 u16 *last_seq, *last_frag;
2935 unsigned long *last_time;
2937 switch (priv->iw_mode) {
2938 case IEEE80211_IF_TYPE_IBSS:{
2939 struct list_head *p;
2940 struct iwl3945_ibss_seq *entry = NULL;
2941 u8 *mac = header->addr2;
2942 int index = mac[5] & (IWL_IBSS_MAC_HASH_SIZE - 1);
2944 __list_for_each(p, &priv->ibss_mac_hash[index]) {
2945 entry = list_entry(p, struct iwl3945_ibss_seq, list);
2946 if (!compare_ether_addr(entry->mac, mac))
2949 if (p == &priv->ibss_mac_hash[index]) {
2950 entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
2952 IWL_ERROR("Cannot malloc new mac entry\n");
2955 memcpy(entry->mac, mac, ETH_ALEN);
2956 entry->seq_num = seq;
2957 entry->frag_num = frag;
2958 entry->packet_time = jiffies;
2959 list_add(&entry->list, &priv->ibss_mac_hash[index]);
2962 last_seq = &entry->seq_num;
2963 last_frag = &entry->frag_num;
2964 last_time = &entry->packet_time;
2967 case IEEE80211_IF_TYPE_STA:
2968 last_seq = &priv->last_seq_num;
2969 last_frag = &priv->last_frag_num;
2970 last_time = &priv->last_packet_time;
2975 if ((*last_seq == seq) &&
2976 time_after(*last_time + IWL_PACKET_RETRY_TIME, jiffies)) {
2977 if (*last_frag == frag)
2979 if (*last_frag + 1 != frag)
2980 /* out-of-order fragment */
2986 *last_time = jiffies;
2993 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
2995 #include "iwl-spectrum.h"
2997 #define BEACON_TIME_MASK_LOW 0x00FFFFFF
2998 #define BEACON_TIME_MASK_HIGH 0xFF000000
2999 #define TIME_UNIT 1024
3002 * extended beacon time format
3003 * time in usec will be changed into a 32-bit value in 8:24 format
3004 * the high 1 byte is the beacon counts
3005 * the lower 3 bytes is the time in usec within one beacon interval
3008 static u32 iwl3945_usecs_to_beacons(u32 usec, u32 beacon_interval)
3012 u32 interval = beacon_interval * 1024;
3014 if (!interval || !usec)
3017 quot = (usec / interval) & (BEACON_TIME_MASK_HIGH >> 24);
3018 rem = (usec % interval) & BEACON_TIME_MASK_LOW;
3020 return (quot << 24) + rem;
3023 /* base is usually what we get from ucode with each received frame,
3024 * the same as HW timer counter counting down
3027 static __le32 iwl3945_add_beacon_time(u32 base, u32 addon, u32 beacon_interval)
3029 u32 base_low = base & BEACON_TIME_MASK_LOW;
3030 u32 addon_low = addon & BEACON_TIME_MASK_LOW;
3031 u32 interval = beacon_interval * TIME_UNIT;
3032 u32 res = (base & BEACON_TIME_MASK_HIGH) +
3033 (addon & BEACON_TIME_MASK_HIGH);
3035 if (base_low > addon_low)
3036 res += base_low - addon_low;
3037 else if (base_low < addon_low) {
3038 res += interval + base_low - addon_low;
3043 return cpu_to_le32(res);
3046 static int iwl3945_get_measurement(struct iwl3945_priv *priv,
3047 struct ieee80211_measurement_params *params,
3050 struct iwl3945_spectrum_cmd spectrum;
3051 struct iwl3945_rx_packet *res;
3052 struct iwl3945_host_cmd cmd = {
3053 .id = REPLY_SPECTRUM_MEASUREMENT_CMD,
3054 .data = (void *)&spectrum,
3055 .meta.flags = CMD_WANT_SKB,
3057 u32 add_time = le64_to_cpu(params->start_time);
3059 int spectrum_resp_status;
3060 int duration = le16_to_cpu(params->duration);
3062 if (iwl3945_is_associated(priv))
3064 iwl3945_usecs_to_beacons(
3065 le64_to_cpu(params->start_time) - priv->last_tsf,
3066 le16_to_cpu(priv->rxon_timing.beacon_interval));
3068 memset(&spectrum, 0, sizeof(spectrum));
3070 spectrum.channel_count = cpu_to_le16(1);
3072 RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
3073 spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
3074 cmd.len = sizeof(spectrum);
3075 spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
3077 if (iwl3945_is_associated(priv))
3078 spectrum.start_time =
3079 iwl3945_add_beacon_time(priv->last_beacon_time,
3081 le16_to_cpu(priv->rxon_timing.beacon_interval));
3083 spectrum.start_time = 0;
3085 spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
3086 spectrum.channels[0].channel = params->channel;
3087 spectrum.channels[0].type = type;
3088 if (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)
3089 spectrum.flags |= RXON_FLG_BAND_24G_MSK |
3090 RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK;
3092 rc = iwl3945_send_cmd_sync(priv, &cmd);
3096 res = (struct iwl3945_rx_packet *)cmd.meta.u.skb->data;
3097 if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
3098 IWL_ERROR("Bad return from REPLY_RX_ON_ASSOC command\n");
3102 spectrum_resp_status = le16_to_cpu(res->u.spectrum.status);
3103 switch (spectrum_resp_status) {
3104 case 0: /* Command will be handled */
3105 if (res->u.spectrum.id != 0xff) {
3106 IWL_DEBUG_INFO("Replaced existing measurement: %d\n",
3107 res->u.spectrum.id);
3108 priv->measurement_status &= ~MEASUREMENT_READY;
3110 priv->measurement_status |= MEASUREMENT_ACTIVE;
3114 case 1: /* Command will not be handled */
3119 dev_kfree_skb_any(cmd.meta.u.skb);
3125 static void iwl3945_rx_reply_alive(struct iwl3945_priv *priv,
3126 struct iwl3945_rx_mem_buffer *rxb)
3128 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3129 struct iwl3945_alive_resp *palive;
3130 struct delayed_work *pwork;
3132 palive = &pkt->u.alive_frame;
3134 IWL_DEBUG_INFO("Alive ucode status 0x%08X revision "
3136 palive->is_valid, palive->ver_type,
3137 palive->ver_subtype);
3139 if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
3140 IWL_DEBUG_INFO("Initialization Alive received.\n");
3141 memcpy(&priv->card_alive_init,
3142 &pkt->u.alive_frame,
3143 sizeof(struct iwl3945_init_alive_resp));
3144 pwork = &priv->init_alive_start;
3146 IWL_DEBUG_INFO("Runtime Alive received.\n");
3147 memcpy(&priv->card_alive, &pkt->u.alive_frame,
3148 sizeof(struct iwl3945_alive_resp));
3149 pwork = &priv->alive_start;
3150 iwl3945_disable_events(priv);
3153 /* We delay the ALIVE response by 5ms to
3154 * give the HW RF Kill time to activate... */
3155 if (palive->is_valid == UCODE_VALID_OK)
3156 queue_delayed_work(priv->workqueue, pwork,
3157 msecs_to_jiffies(5));
3159 IWL_WARNING("uCode did not respond OK.\n");
3162 static void iwl3945_rx_reply_add_sta(struct iwl3945_priv *priv,
3163 struct iwl3945_rx_mem_buffer *rxb)
3165 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3167 IWL_DEBUG_RX("Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status);
3171 static void iwl3945_rx_reply_error(struct iwl3945_priv *priv,
3172 struct iwl3945_rx_mem_buffer *rxb)
3174 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3176 IWL_ERROR("Error Reply type 0x%08X cmd %s (0x%02X) "
3177 "seq 0x%04X ser 0x%08X\n",
3178 le32_to_cpu(pkt->u.err_resp.error_type),
3179 get_cmd_string(pkt->u.err_resp.cmd_id),
3180 pkt->u.err_resp.cmd_id,
3181 le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num),
3182 le32_to_cpu(pkt->u.err_resp.error_info));
3185 #define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
3187 static void iwl3945_rx_csa(struct iwl3945_priv *priv, struct iwl3945_rx_mem_buffer *rxb)
3189 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3190 struct iwl3945_rxon_cmd *rxon = (void *)&priv->active_rxon;
3191 struct iwl3945_csa_notification *csa = &(pkt->u.csa_notif);
3192 IWL_DEBUG_11H("CSA notif: channel %d, status %d\n",
3193 le16_to_cpu(csa->channel), le32_to_cpu(csa->status));
3194 rxon->channel = csa->channel;
3195 priv->staging_rxon.channel = csa->channel;
3198 static void iwl3945_rx_spectrum_measure_notif(struct iwl3945_priv *priv,
3199 struct iwl3945_rx_mem_buffer *rxb)
3201 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
3202 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3203 struct iwl3945_spectrum_notification *report = &(pkt->u.spectrum_notif);
3205 if (!report->state) {
3206 IWL_DEBUG(IWL_DL_11H | IWL_DL_INFO,
3207 "Spectrum Measure Notification: Start\n");
3211 memcpy(&priv->measure_report, report, sizeof(*report));
3212 priv->measurement_status |= MEASUREMENT_READY;
3216 static void iwl3945_rx_pm_sleep_notif(struct iwl3945_priv *priv,
3217 struct iwl3945_rx_mem_buffer *rxb)
3219 #ifdef CONFIG_IWL3945_DEBUG
3220 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3221 struct iwl3945_sleep_notification *sleep = &(pkt->u.sleep_notif);
3222 IWL_DEBUG_RX("sleep mode: %d, src: %d\n",
3223 sleep->pm_sleep_mode, sleep->pm_wakeup_src);
3227 static void iwl3945_rx_pm_debug_statistics_notif(struct iwl3945_priv *priv,
3228 struct iwl3945_rx_mem_buffer *rxb)
3230 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3231 IWL_DEBUG_RADIO("Dumping %d bytes of unhandled "
3232 "notification for %s:\n",
3233 le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd));
3234 iwl3945_print_hex_dump(IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
3237 static void iwl3945_bg_beacon_update(struct work_struct *work)
3239 struct iwl3945_priv *priv =
3240 container_of(work, struct iwl3945_priv, beacon_update);
3241 struct sk_buff *beacon;
3243 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
3244 beacon = ieee80211_beacon_get(priv->hw, priv->vif, NULL);
3247 IWL_ERROR("update beacon failed\n");
3251 mutex_lock(&priv->mutex);
3252 /* new beacon skb is allocated every time; dispose previous.*/
3253 if (priv->ibss_beacon)
3254 dev_kfree_skb(priv->ibss_beacon);
3256 priv->ibss_beacon = beacon;
3257 mutex_unlock(&priv->mutex);
3259 iwl3945_send_beacon_cmd(priv);
3262 static void iwl3945_rx_beacon_notif(struct iwl3945_priv *priv,
3263 struct iwl3945_rx_mem_buffer *rxb)
3265 #ifdef CONFIG_IWL3945_DEBUG
3266 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3267 struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status);
3268 u8 rate = beacon->beacon_notify_hdr.rate;
3270 IWL_DEBUG_RX("beacon status %x retries %d iss %d "
3271 "tsf %d %d rate %d\n",
3272 le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
3273 beacon->beacon_notify_hdr.failure_frame,
3274 le32_to_cpu(beacon->ibss_mgr_status),
3275 le32_to_cpu(beacon->high_tsf),
3276 le32_to_cpu(beacon->low_tsf), rate);
3279 if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) &&
3280 (!test_bit(STATUS_EXIT_PENDING, &priv->status)))
3281 queue_work(priv->workqueue, &priv->beacon_update);
3284 /* Service response to REPLY_SCAN_CMD (0x80) */
3285 static void iwl3945_rx_reply_scan(struct iwl3945_priv *priv,
3286 struct iwl3945_rx_mem_buffer *rxb)
3288 #ifdef CONFIG_IWL3945_DEBUG
3289 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3290 struct iwl3945_scanreq_notification *notif =
3291 (struct iwl3945_scanreq_notification *)pkt->u.raw;
3293 IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status);
3297 /* Service SCAN_START_NOTIFICATION (0x82) */
3298 static void iwl3945_rx_scan_start_notif(struct iwl3945_priv *priv,
3299 struct iwl3945_rx_mem_buffer *rxb)
3301 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3302 struct iwl3945_scanstart_notification *notif =
3303 (struct iwl3945_scanstart_notification *)pkt->u.raw;
3304 priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
3305 IWL_DEBUG_SCAN("Scan start: "
3307 "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
3309 notif->band ? "bg" : "a",
3311 notif->tsf_low, notif->status, notif->beacon_timer);
3314 /* Service SCAN_RESULTS_NOTIFICATION (0x83) */
3315 static void iwl3945_rx_scan_results_notif(struct iwl3945_priv *priv,
3316 struct iwl3945_rx_mem_buffer *rxb)
3318 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3319 struct iwl3945_scanresults_notification *notif =
3320 (struct iwl3945_scanresults_notification *)pkt->u.raw;
3322 IWL_DEBUG_SCAN("Scan ch.res: "
3324 "(TSF: 0x%08X:%08X) - %d "
3325 "elapsed=%lu usec (%dms since last)\n",
3327 notif->band ? "bg" : "a",
3328 le32_to_cpu(notif->tsf_high),
3329 le32_to_cpu(notif->tsf_low),
3330 le32_to_cpu(notif->statistics[0]),
3331 le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf,
3332 jiffies_to_msecs(elapsed_jiffies
3333 (priv->last_scan_jiffies, jiffies)));
3335 priv->last_scan_jiffies = jiffies;
3336 priv->next_scan_jiffies = 0;
3339 /* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
3340 static void iwl3945_rx_scan_complete_notif(struct iwl3945_priv *priv,
3341 struct iwl3945_rx_mem_buffer *rxb)
3343 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3344 struct iwl3945_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
3346 IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
3347 scan_notif->scanned_channels,
3348 scan_notif->tsf_low,
3349 scan_notif->tsf_high, scan_notif->status);
3351 /* The HW is no longer scanning */
3352 clear_bit(STATUS_SCAN_HW, &priv->status);
3354 /* The scan completion notification came in, so kill that timer... */
3355 cancel_delayed_work(&priv->scan_check);
3357 IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
3358 (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
3360 jiffies_to_msecs(elapsed_jiffies
3361 (priv->scan_pass_start, jiffies)));
3363 /* Remove this scanned band from the list of pending
3364 * bands to scan, band G precedes A in order of scanning
3365 * as seen in iwl3945_bg_request_scan */
3366 if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
3367 priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
3368 else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ))
3369 priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
3371 /* If a request to abort was given, or the scan did not succeed
3372 * then we reset the scan state machine and terminate,
3373 * re-queuing another scan if one has been requested */
3374 if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
3375 IWL_DEBUG_INFO("Aborted scan completed.\n");
3376 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
3378 /* If there are more bands on this scan pass reschedule */
3379 if (priv->scan_bands > 0)
3383 priv->last_scan_jiffies = jiffies;
3384 priv->next_scan_jiffies = 0;
3385 IWL_DEBUG_INFO("Setting scan to off\n");
3387 clear_bit(STATUS_SCANNING, &priv->status);
3389 IWL_DEBUG_INFO("Scan took %dms\n",
3390 jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies)));
3392 queue_work(priv->workqueue, &priv->scan_completed);
3397 priv->scan_pass_start = jiffies;
3398 queue_work(priv->workqueue, &priv->request_scan);
3401 /* Handle notification from uCode that card's power state is changing
3402 * due to software, hardware, or critical temperature RFKILL */
3403 static void iwl3945_rx_card_state_notif(struct iwl3945_priv *priv,
3404 struct iwl3945_rx_mem_buffer *rxb)
3406 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3407 u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
3408 unsigned long status = priv->status;
3410 IWL_DEBUG_RF_KILL("Card state received: HW:%s SW:%s\n",
3411 (flags & HW_CARD_DISABLED) ? "Kill" : "On",
3412 (flags & SW_CARD_DISABLED) ? "Kill" : "On");
3414 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_SET,
3415 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
3417 if (flags & HW_CARD_DISABLED)
3418 set_bit(STATUS_RF_KILL_HW, &priv->status);
3420 clear_bit(STATUS_RF_KILL_HW, &priv->status);
3423 if (flags & SW_CARD_DISABLED)
3424 set_bit(STATUS_RF_KILL_SW, &priv->status);
3426 clear_bit(STATUS_RF_KILL_SW, &priv->status);
3428 iwl3945_scan_cancel(priv);
3430 if ((test_bit(STATUS_RF_KILL_HW, &status) !=
3431 test_bit(STATUS_RF_KILL_HW, &priv->status)) ||
3432 (test_bit(STATUS_RF_KILL_SW, &status) !=
3433 test_bit(STATUS_RF_KILL_SW, &priv->status)))
3434 queue_work(priv->workqueue, &priv->rf_kill);
3436 wake_up_interruptible(&priv->wait_command_queue);
3440 * iwl3945_setup_rx_handlers - Initialize Rx handler callbacks
3442 * Setup the RX handlers for each of the reply types sent from the uCode
3445 * This function chains into the hardware specific files for them to setup
3446 * any hardware specific handlers as well.
3448 static void iwl3945_setup_rx_handlers(struct iwl3945_priv *priv)
3450 priv->rx_handlers[REPLY_ALIVE] = iwl3945_rx_reply_alive;
3451 priv->rx_handlers[REPLY_ADD_STA] = iwl3945_rx_reply_add_sta;
3452 priv->rx_handlers[REPLY_ERROR] = iwl3945_rx_reply_error;
3453 priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl3945_rx_csa;
3454 priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
3455 iwl3945_rx_spectrum_measure_notif;
3456 priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl3945_rx_pm_sleep_notif;
3457 priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
3458 iwl3945_rx_pm_debug_statistics_notif;
3459 priv->rx_handlers[BEACON_NOTIFICATION] = iwl3945_rx_beacon_notif;
3462 * The same handler is used for both the REPLY to a discrete
3463 * statistics request from the host as well as for the periodic
3464 * statistics notifications (after received beacons) from the uCode.
3466 priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl3945_hw_rx_statistics;
3467 priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl3945_hw_rx_statistics;
3469 priv->rx_handlers[REPLY_SCAN_CMD] = iwl3945_rx_reply_scan;
3470 priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl3945_rx_scan_start_notif;
3471 priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
3472 iwl3945_rx_scan_results_notif;
3473 priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
3474 iwl3945_rx_scan_complete_notif;
3475 priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl3945_rx_card_state_notif;
3477 /* Set up hardware specific Rx handlers */
3478 iwl3945_hw_rx_handler_setup(priv);
3482 * iwl3945_cmd_queue_reclaim - Reclaim CMD queue entries
3483 * When FW advances 'R' index, all entries between old and new 'R' index
3484 * need to be reclaimed.
3486 static void iwl3945_cmd_queue_reclaim(struct iwl3945_priv *priv,
3487 int txq_id, int index)
3489 struct iwl3945_tx_queue *txq = &priv->txq[txq_id];
3490 struct iwl3945_queue *q = &txq->q;
3493 if ((index >= q->n_bd) || (iwl3945_x2_queue_used(q, index) == 0)) {
3494 IWL_ERROR("Read index for DMA queue txq id (%d), index %d, "
3495 "is out of range [0-%d] %d %d.\n", txq_id,
3496 index, q->n_bd, q->write_ptr, q->read_ptr);
3500 for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index;
3501 q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
3503 IWL_ERROR("HCMD skipped: index (%d) %d %d\n", index,
3504 q->write_ptr, q->read_ptr);
3505 queue_work(priv->workqueue, &priv->restart);
3514 * iwl3945_tx_cmd_complete - Pull unused buffers off the queue and reclaim them
3515 * @rxb: Rx buffer to reclaim
3517 * If an Rx buffer has an async callback associated with it the callback
3518 * will be executed. The attached skb (if present) will only be freed
3519 * if the callback returns 1
3521 static void iwl3945_tx_cmd_complete(struct iwl3945_priv *priv,
3522 struct iwl3945_rx_mem_buffer *rxb)
3524 struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data;
3525 u16 sequence = le16_to_cpu(pkt->hdr.sequence);
3526 int txq_id = SEQ_TO_QUEUE(sequence);
3527 int index = SEQ_TO_INDEX(sequence);
3528 int huge = sequence & SEQ_HUGE_FRAME;
3530 struct iwl3945_cmd *cmd;
3532 BUG_ON(txq_id != IWL_CMD_QUEUE_NUM);
3534 cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge);
3535 cmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index];
3537 /* Input error checking is done when commands are added to queue. */
3538 if (cmd->meta.flags & CMD_WANT_SKB) {
3539 cmd->meta.source->u.skb = rxb->skb;
3541 } else if (cmd->meta.u.callback &&
3542 !cmd->meta.u.callback(priv, cmd, rxb->skb))
3545 iwl3945_cmd_queue_reclaim(priv, txq_id, index);
3547 if (!(cmd->meta.flags & CMD_ASYNC)) {
3548 clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
3549 wake_up_interruptible(&priv->wait_command_queue);
3553 /************************** RX-FUNCTIONS ****************************/
3555 * Rx theory of operation
3557 * The host allocates 32 DMA target addresses and passes the host address
3558 * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is
3562 * The host/firmware share two index registers for managing the Rx buffers.
3564 * The READ index maps to the first position that the firmware may be writing
3565 * to -- the driver can read up to (but not including) this position and get
3567 * The READ index is managed by the firmware once the card is enabled.
3569 * The WRITE index maps to the last position the driver has read from -- the
3570 * position preceding WRITE is the last slot the firmware can place a packet.
3572 * The queue is empty (no good data) if WRITE = READ - 1, and is full if
3575 * During initialization, the host sets up the READ queue position to the first
3576 * INDEX position, and WRITE to the last (READ - 1 wrapped)
3578 * When the firmware places a packet in a buffer, it will advance the READ index
3579 * and fire the RX interrupt. The driver can then query the READ index and
3580 * process as many packets as possible, moving the WRITE index forward as it
3581 * resets the Rx queue buffers with new memory.
3583 * The management in the driver is as follows:
3584 * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
3585 * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
3586 * to replenish the iwl->rxq->rx_free.
3587 * + In iwl3945_rx_replenish (scheduled) if 'processed' != 'read' then the
3588 * iwl->rxq is replenished and the READ INDEX is updated (updating the
3589 * 'processed' and 'read' driver indexes as well)
3590 * + A received packet is processed and handed to the kernel network stack,
3591 * detached from the iwl->rxq. The driver 'processed' index is updated.
3592 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
3593 * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
3594 * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
3595 * were enough free buffers and RX_STALLED is set it is cleared.
3600 * iwl3945_rx_queue_alloc() Allocates rx_free
3601 * iwl3945_rx_replenish() Replenishes rx_free list from rx_used, and calls
3602 * iwl3945_rx_queue_restock
3603 * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx
3604 * queue, updates firmware pointers, and updates
3605 * the WRITE index. If insufficient rx_free buffers
3606 * are available, schedules iwl3945_rx_replenish
3608 * -- enable interrupts --
3609 * ISR - iwl3945_rx() Detach iwl3945_rx_mem_buffers from pool up to the
3610 * READ INDEX, detaching the SKB from the pool.
3611 * Moves the packet buffer from queue to rx_used.
3612 * Calls iwl3945_rx_queue_restock to refill any empty
3619 * iwl3945_rx_queue_space - Return number of free slots available in queue.
3621 static int iwl3945_rx_queue_space(const struct iwl3945_rx_queue *q)
3623 int s = q->read - q->write;
3626 /* keep some buffer to not confuse full and empty queue */
3634 * iwl3945_rx_queue_update_write_ptr - Update the write pointer for the RX queue
3636 int iwl3945_rx_queue_update_write_ptr(struct iwl3945_priv *priv, struct iwl3945_rx_queue *q)
3640 unsigned long flags;
3642 spin_lock_irqsave(&q->lock, flags);
3644 if (q->need_update == 0)
3647 /* If power-saving is in use, make sure device is awake */
3648 if (test_bit(STATUS_POWER_PMI, &priv->status)) {
3649 reg = iwl3945_read32(priv, CSR_UCODE_DRV_GP1);
3651 if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
3652 iwl3945_set_bit(priv, CSR_GP_CNTRL,
3653 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
3657 rc = iwl3945_grab_nic_access(priv);
3661 /* Device expects a multiple of 8 */
3662 iwl3945_write_direct32(priv, FH_RSCSR_CHNL0_WPTR,
3664 iwl3945_release_nic_access(priv);
3666 /* Else device is assumed to be awake */
3668 /* Device expects a multiple of 8 */
3669 iwl3945_write32(priv, FH_RSCSR_CHNL0_WPTR, q->write & ~0x7);
3675 spin_unlock_irqrestore(&q->lock, flags);
3680 * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
3682 static inline __le32 iwl3945_dma_addr2rbd_ptr(struct iwl3945_priv *priv,
3683 dma_addr_t dma_addr)
3685 return cpu_to_le32((u32)dma_addr);
3689 * iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool
3691 * If there are slots in the RX queue that need to be restocked,
3692 * and we have free pre-allocated buffers, fill the ranks as much
3693 * as we can, pulling from rx_free.
3695 * This moves the 'write' index forward to catch up with 'processed', and
3696 * also updates the memory address in the firmware to reference the new
3699 static int iwl3945_rx_queue_restock(struct iwl3945_priv *priv)
3701 struct iwl3945_rx_queue *rxq = &priv->rxq;
3702 struct list_head *element;
3703 struct iwl3945_rx_mem_buffer *rxb;
3704 unsigned long flags;
3707 spin_lock_irqsave(&rxq->lock, flags);
3708 write = rxq->write & ~0x7;
3709 while ((iwl3945_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
3710 /* Get next free Rx buffer, remove from free list */
3711 element = rxq->rx_free.next;
3712 rxb = list_entry(element, struct iwl3945_rx_mem_buffer, list);
3715 /* Point to Rx buffer via next RBD in circular buffer */
3716 rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->dma_addr);
3717 rxq->queue[rxq->write] = rxb;
3718 rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
3721 spin_unlock_irqrestore(&rxq->lock, flags);
3722 /* If the pre-allocated buffer pool is dropping low, schedule to
3724 if (rxq->free_count <= RX_LOW_WATERMARK)
3725 queue_work(priv->workqueue, &priv->rx_replenish);
3728 /* If we've added more space for the firmware to place data, tell it.
3729 * Increment device's write pointer in multiples of 8. */
3730 if ((write != (rxq->write & ~0x7))
3731 || (abs(rxq->write - rxq->read) > 7)) {
3732 spin_lock_irqsave(&rxq->lock, flags);
3733 rxq->need_update = 1;
3734 spin_unlock_irqrestore(&rxq->lock, flags);
3735 rc = iwl3945_rx_queue_update_write_ptr(priv, rxq);
3744 * iwl3945_rx_replenish - Move all used packet from rx_used to rx_free
3746 * When moving to rx_free an SKB is allocated for the slot.
3748 * Also restock the Rx queue via iwl3945_rx_queue_restock.
3749 * This is called as a scheduled work item (except for during initialization)
3751 static void iwl3945_rx_allocate(struct iwl3945_priv *priv)
3753 struct iwl3945_rx_queue *rxq = &priv->rxq;
3754 struct list_head *element;
3755 struct iwl3945_rx_mem_buffer *rxb;
3756 unsigned long flags;
3757 spin_lock_irqsave(&rxq->lock, flags);
3758 while (!list_empty(&rxq->rx_used)) {
3759 element = rxq->rx_used.next;
3760 rxb = list_entry(element, struct iwl3945_rx_mem_buffer, list);
3762 /* Alloc a new receive buffer */
3764 alloc_skb(IWL_RX_BUF_SIZE, __GFP_NOWARN | GFP_ATOMIC);
3766 if (net_ratelimit())
3767 printk(KERN_CRIT DRV_NAME
3768 ": Can not allocate SKB buffers\n");
3769 /* We don't reschedule replenish work here -- we will
3770 * call the restock method and if it still needs
3771 * more buffers it will schedule replenish */
3775 /* If radiotap head is required, reserve some headroom here.
3776 * The physical head count is a variable rx_stats->phy_count.
3777 * We reserve 4 bytes here. Plus these extra bytes, the
3778 * headroom of the physical head should be enough for the
3779 * radiotap head that iwl3945 supported. See iwl3945_rt.
3781 skb_reserve(rxb->skb, 4);
3783 priv->alloc_rxb_skb++;
3786 /* Get physical address of RB/SKB */
3788 pci_map_single(priv->pci_dev, rxb->skb->data,
3789 IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
3790 list_add_tail(&rxb->list, &rxq->rx_free);
3793 spin_unlock_irqrestore(&rxq->lock, flags);
3797 * this should be called while priv->lock is locked
3799 static void __iwl3945_rx_replenish(void *data)
3801 struct iwl3945_priv *priv = data;
3803 iwl3945_rx_allocate(priv);
3804 iwl3945_rx_queue_restock(priv);
3808 void iwl3945_rx_replenish(void *data)
3810 struct iwl3945_priv *priv = data;
3811 unsigned long flags;
3813 iwl3945_rx_allocate(priv);
3815 spin_lock_irqsave(&priv->lock, flags);
3816 iwl3945_rx_queue_restock(priv);
3817 spin_unlock_irqrestore(&priv->lock, flags);
3820 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
3821 * If an SKB has been detached, the POOL needs to have its SKB set to NULL
3822 * This free routine walks the list of POOL entries and if SKB is set to
3823 * non NULL it is unmapped and freed
3825 static void iwl3945_rx_queue_free(struct iwl3945_priv *priv, struct iwl3945_rx_queue *rxq)
3828 for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
3829 if (rxq->pool[i].skb != NULL) {
3830 pci_unmap_single(priv->pci_dev,
3831 rxq->pool[i].dma_addr,
3832 IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
3833 dev_kfree_skb(rxq->pool[i].skb);
3837 pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd,
3842 int iwl3945_rx_queue_alloc(struct iwl3945_priv *priv)
3844 struct iwl3945_rx_queue *rxq = &priv->rxq;
3845 struct pci_dev *dev = priv->pci_dev;
3848 spin_lock_init(&rxq->lock);
3849 INIT_LIST_HEAD(&rxq->rx_free);
3850 INIT_LIST_HEAD(&rxq->rx_used);
3852 /* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */
3853 rxq->bd = pci_alloc_consistent(dev, 4 * RX_QUEUE_SIZE, &rxq->dma_addr);
3857 /* Fill the rx_used queue with _all_ of the Rx buffers */
3858 for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++)
3859 list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
3861 /* Set us so that we have processed and used all buffers, but have
3862 * not restocked the Rx queue with fresh buffers */
3863 rxq->read = rxq->write = 0;
3864 rxq->free_count = 0;
3865 rxq->need_update = 0;
3869 void iwl3945_rx_queue_reset(struct iwl3945_priv *priv, struct iwl3945_rx_queue *rxq)
3871 unsigned long flags;
3873 spin_lock_irqsave(&rxq->lock, flags);
3874 INIT_LIST_HEAD(&rxq->rx_free);
3875 INIT_LIST_HEAD(&rxq->rx_used);
3876 /* Fill the rx_used queue with _all_ of the Rx buffers */
3877 for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
3878 /* In the reset function, these buffers may have been allocated
3879 * to an SKB, so we need to unmap and free potential storage */
3880 if (rxq->pool[i].skb != NULL) {
3881 pci_unmap_single(priv->pci_dev,
3882 rxq->pool[i].dma_addr,
3883 IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
3884 priv->alloc_rxb_skb--;
3885 dev_kfree_skb(rxq->pool[i].skb);
3886 rxq->pool[i].skb = NULL;
3888 list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
3891 /* Set us so that we have processed and used all buffers, but have
3892 * not restocked the Rx queue with fresh buffers */
3893 rxq->read = rxq->write = 0;
3894 rxq->free_count = 0;
3895 spin_unlock_irqrestore(&rxq->lock, flags);
3898 /* Convert linear signal-to-noise ratio into dB */
3899 static u8 ratio2dB[100] = {
3900 /* 0 1 2 3 4 5 6 7 8 9 */
3901 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
3902 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
3903 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
3904 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
3905 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
3906 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
3907 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
3908 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
3909 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
3910 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
3913 /* Calculates a relative dB value from a ratio of linear
3914 * (i.e. not dB) signal levels.
3915 * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
3916 int iwl3945_calc_db_from_ratio(int sig_ratio)
3918 /* 1000:1 or higher just report as 60 dB */
3919 if (sig_ratio >= 1000)
3922 /* 100:1 or higher, divide by 10 and use table,
3923 * add 20 dB to make up for divide by 10 */
3924 if (sig_ratio >= 100)
3925 return (20 + (int)ratio2dB[sig_ratio/10]);
3927 /* We shouldn't see this */
3931 /* Use table for ratios 1:1 - 99:1 */
3932 return (int)ratio2dB[sig_ratio];
3935 #define PERFECT_RSSI (-20) /* dBm */
3936 #define WORST_RSSI (-95) /* dBm */
3937 #define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
3939 /* Calculate an indication of rx signal quality (a percentage, not dBm!).
3940 * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
3941 * about formulas used below. */
3942 int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm)
3945 int degradation = PERFECT_RSSI - rssi_dbm;
3947 /* If we get a noise measurement, use signal-to-noise ratio (SNR)
3948 * as indicator; formula is (signal dbm - noise dbm).
3949 * SNR at or above 40 is a great signal (100%).
3950 * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
3951 * Weakest usable signal is usually 10 - 15 dB SNR. */
3953 if (rssi_dbm - noise_dbm >= 40)
3955 else if (rssi_dbm < noise_dbm)
3957 sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
3959 /* Else use just the signal level.
3960 * This formula is a least squares fit of data points collected and
3961 * compared with a reference system that had a percentage (%) display
3962 * for signal quality. */
3964 sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
3965 (15 * RSSI_RANGE + 62 * degradation)) /
3966 (RSSI_RANGE * RSSI_RANGE);
3970 else if (sig_qual < 1)
3977 * iwl3945_rx_handle - Main entry function for receiving responses from uCode
3979 * Uses the priv->rx_handlers callback function array to invoke
3980 * the appropriate handlers, including command responses,
3981 * frame-received notifications, and other notifications.
3983 static void iwl3945_rx_handle(struct iwl3945_priv *priv)
3985 struct iwl3945_rx_mem_buffer *rxb;
3986 struct iwl3945_rx_packet *pkt;
3987 struct iwl3945_rx_queue *rxq = &priv->rxq;
3990 unsigned long flags;
3994 /* uCode's read index (stored in shared DRAM) indicates the last Rx
3995 * buffer that the driver may process (last buffer filled by ucode). */
3996 r = iwl3945_hw_get_rx_read(priv);
3999 if (iwl3945_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2))
4001 /* Rx interrupt, but nothing sent from uCode */
4003 IWL_DEBUG(IWL_DL_RX | IWL_DL_ISR, "r = %d, i = %d\n", r, i);
4006 rxb = rxq->queue[i];
4008 /* If an RXB doesn't have a Rx queue slot associated with it,
4009 * then a bug has been introduced in the queue refilling
4010 * routines -- catch it here */
4011 BUG_ON(rxb == NULL);
4013 rxq->queue[i] = NULL;
4015 pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr,
4017 PCI_DMA_FROMDEVICE);
4018 pkt = (struct iwl3945_rx_packet *)rxb->skb->data;
4020 /* Reclaim a command buffer only if this packet is a response
4021 * to a (driver-originated) command.
4022 * If the packet (e.g. Rx frame) originated from uCode,
4023 * there is no command buffer to reclaim.
4024 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
4025 * but apparently a few don't get set; catch them here. */
4026 reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
4027 (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
4028 (pkt->hdr.cmd != REPLY_TX);
4030 /* Based on type of command response or notification,
4031 * handle those that need handling via function in
4032 * rx_handlers table. See iwl3945_setup_rx_handlers() */
4033 if (priv->rx_handlers[pkt->hdr.cmd]) {
4034 IWL_DEBUG(IWL_DL_HOST_COMMAND | IWL_DL_RX | IWL_DL_ISR,
4035 "r = %d, i = %d, %s, 0x%02x\n", r, i,
4036 get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
4037 priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
4039 /* No handling needed */
4040 IWL_DEBUG(IWL_DL_HOST_COMMAND | IWL_DL_RX | IWL_DL_ISR,
4041 "r %d i %d No handler needed for %s, 0x%02x\n",
4042 r, i, get_cmd_string(pkt->hdr.cmd),
4047 /* Invoke any callbacks, transfer the skb to caller, and
4048 * fire off the (possibly) blocking iwl3945_send_cmd()
4049 * as we reclaim the driver command queue */
4050 if (rxb && rxb->skb)
4051 iwl3945_tx_cmd_complete(priv, rxb);
4053 IWL_WARNING("Claim null rxb?\n");
4056 /* For now we just don't re-use anything. We can tweak this
4057 * later to try and re-use notification packets and SKBs that
4058 * fail to Rx correctly */
4059 if (rxb->skb != NULL) {
4060 priv->alloc_rxb_skb--;
4061 dev_kfree_skb_any(rxb->skb);
4065 pci_unmap_single(priv->pci_dev, rxb->dma_addr,
4066 IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
4067 spin_lock_irqsave(&rxq->lock, flags);
4068 list_add_tail(&rxb->list, &priv->rxq.rx_used);
4069 spin_unlock_irqrestore(&rxq->lock, flags);
4070 i = (i + 1) & RX_QUEUE_MASK;
4071 /* If there are a lot of unused frames,
4072 * restock the Rx queue so ucode won't assert. */
4077 __iwl3945_rx_replenish(priv);
4083 /* Backtrack one entry */
4085 iwl3945_rx_queue_restock(priv);
4089 * iwl3945_tx_queue_update_write_ptr - Send new write index to hardware
4091 static int iwl3945_tx_queue_update_write_ptr(struct iwl3945_priv *priv,
4092 struct iwl3945_tx_queue *txq)
4096 int txq_id = txq->q.id;
4098 if (txq->need_update == 0)
4101 /* if we're trying to save power */
4102 if (test_bit(STATUS_POWER_PMI, &priv->status)) {
4103 /* wake up nic if it's powered down ...
4104 * uCode will wake up, and interrupt us again, so next
4105 * time we'll skip this part. */
4106 reg = iwl3945_read32(priv, CSR_UCODE_DRV_GP1);
4108 if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
4109 IWL_DEBUG_INFO("Requesting wakeup, GP1 = 0x%x\n", reg);
4110 iwl3945_set_bit(priv, CSR_GP_CNTRL,
4111 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
4115 /* restore this queue's parameters in nic hardware. */
4116 rc = iwl3945_grab_nic_access(priv);
4119 iwl3945_write_direct32(priv, HBUS_TARG_WRPTR,
4120 txq->q.write_ptr | (txq_id << 8));
4121 iwl3945_release_nic_access(priv);
4123 /* else not in power-save mode, uCode will never sleep when we're
4124 * trying to tx (during RFKILL, we're not trying to tx). */
4126 iwl3945_write32(priv, HBUS_TARG_WRPTR,
4127 txq->q.write_ptr | (txq_id << 8));
4129 txq->need_update = 0;
4134 #ifdef CONFIG_IWL3945_DEBUG
4135 static void iwl3945_print_rx_config_cmd(struct iwl3945_rxon_cmd *rxon)
4137 DECLARE_MAC_BUF(mac);
4139 IWL_DEBUG_RADIO("RX CONFIG:\n");
4140 iwl3945_print_hex_dump(IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
4141 IWL_DEBUG_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon->channel));
4142 IWL_DEBUG_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags));
4143 IWL_DEBUG_RADIO("u32 filter_flags: 0x%08x\n",
4144 le32_to_cpu(rxon->filter_flags));
4145 IWL_DEBUG_RADIO("u8 dev_type: 0x%x\n", rxon->dev_type);
4146 IWL_DEBUG_RADIO("u8 ofdm_basic_rates: 0x%02x\n",
4147 rxon->ofdm_basic_rates);
4148 IWL_DEBUG_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates);
4149 IWL_DEBUG_RADIO("u8[6] node_addr: %s\n",
4150 print_mac(mac, rxon->node_addr));
4151 IWL_DEBUG_RADIO("u8[6] bssid_addr: %s\n",
4152 print_mac(mac, rxon->bssid_addr));
4153 IWL_DEBUG_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
4157 static void iwl3945_enable_interrupts(struct iwl3945_priv *priv)
4159 IWL_DEBUG_ISR("Enabling interrupts\n");
4160 set_bit(STATUS_INT_ENABLED, &priv->status);
4161 iwl3945_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK);
4165 /* call this function to flush any scheduled tasklet */
4166 static inline void iwl_synchronize_irq(struct iwl3945_priv *priv)
4168 /* wait to make sure we flush pedding tasklet*/
4169 synchronize_irq(priv->pci_dev->irq);
4170 tasklet_kill(&priv->irq_tasklet);
4174 static inline void iwl3945_disable_interrupts(struct iwl3945_priv *priv)
4176 clear_bit(STATUS_INT_ENABLED, &priv->status);
4178 /* disable interrupts from uCode/NIC to host */
4179 iwl3945_write32(priv, CSR_INT_MASK, 0x00000000);
4181 /* acknowledge/clear/reset any interrupts still pending
4182 * from uCode or flow handler (Rx/Tx DMA) */
4183 iwl3945_write32(priv, CSR_INT, 0xffffffff);
4184 iwl3945_write32(priv, CSR_FH_INT_STATUS, 0xffffffff);
4185 IWL_DEBUG_ISR("Disabled interrupts\n");
4188 static const char *desc_lookup(int i)
4196 return "BAD_CHECKSUM";
4198 return "NMI_INTERRUPT";
4202 return "FATAL_ERROR";
4208 #define ERROR_START_OFFSET (1 * sizeof(u32))
4209 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
4211 static void iwl3945_dump_nic_error_log(struct iwl3945_priv *priv)
4214 u32 desc, time, count, base, data1;
4215 u32 blink1, blink2, ilink1, ilink2;
4218 base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
4220 if (!iwl3945_hw_valid_rtc_data_addr(base)) {
4221 IWL_ERROR("Not valid error log pointer 0x%08X\n", base);
4225 rc = iwl3945_grab_nic_access(priv);
4227 IWL_WARNING("Can not read from adapter at this time.\n");
4231 count = iwl3945_read_targ_mem(priv, base);
4233 if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
4234 IWL_ERROR("Start IWL Error Log Dump:\n");
4235 IWL_ERROR("Status: 0x%08lX, count: %d\n", priv->status, count);
4238 IWL_ERROR("Desc Time asrtPC blink2 "
4239 "ilink1 nmiPC Line\n");
4240 for (i = ERROR_START_OFFSET;
4241 i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
4242 i += ERROR_ELEM_SIZE) {
4243 desc = iwl3945_read_targ_mem(priv, base + i);
4245 iwl3945_read_targ_mem(priv, base + i + 1 * sizeof(u32));
4247 iwl3945_read_targ_mem(priv, base + i + 2 * sizeof(u32));
4249 iwl3945_read_targ_mem(priv, base + i + 3 * sizeof(u32));
4251 iwl3945_read_targ_mem(priv, base + i + 4 * sizeof(u32));
4253 iwl3945_read_targ_mem(priv, base + i + 5 * sizeof(u32));
4255 iwl3945_read_targ_mem(priv, base + i + 6 * sizeof(u32));
4258 ("%-13s (#%d) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
4259 desc_lookup(desc), desc, time, blink1, blink2,
4260 ilink1, ilink2, data1);
4263 iwl3945_release_nic_access(priv);
4267 #define EVENT_START_OFFSET (6 * sizeof(u32))
4270 * iwl3945_print_event_log - Dump error event log to syslog
4272 * NOTE: Must be called with iwl3945_grab_nic_access() already obtained!
4274 static void iwl3945_print_event_log(struct iwl3945_priv *priv, u32 start_idx,
4275 u32 num_events, u32 mode)
4278 u32 base; /* SRAM byte address of event log header */
4279 u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
4280 u32 ptr; /* SRAM byte address of log data */
4281 u32 ev, time, data; /* event log data */
4283 if (num_events == 0)
4286 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
4289 event_size = 2 * sizeof(u32);
4291 event_size = 3 * sizeof(u32);
4293 ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
4295 /* "time" is actually "data" for mode 0 (no timestamp).
4296 * place event id # at far right for easier visual parsing. */
4297 for (i = 0; i < num_events; i++) {
4298 ev = iwl3945_read_targ_mem(priv, ptr);
4300 time = iwl3945_read_targ_mem(priv, ptr);
4303 IWL_ERROR("0x%08x\t%04u\n", time, ev); /* data, ev */
4305 data = iwl3945_read_targ_mem(priv, ptr);
4307 IWL_ERROR("%010u\t0x%08x\t%04u\n", time, data, ev);
4312 static void iwl3945_dump_nic_event_log(struct iwl3945_priv *priv)
4315 u32 base; /* SRAM byte address of event log header */
4316 u32 capacity; /* event log capacity in # entries */
4317 u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
4318 u32 num_wraps; /* # times uCode wrapped to top of log */
4319 u32 next_entry; /* index of next entry to be written by uCode */
4320 u32 size; /* # entries that we'll print */
4322 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
4323 if (!iwl3945_hw_valid_rtc_data_addr(base)) {
4324 IWL_ERROR("Invalid event log pointer 0x%08X\n", base);
4328 rc = iwl3945_grab_nic_access(priv);
4330 IWL_WARNING("Can not read from adapter at this time.\n");
4334 /* event log header */
4335 capacity = iwl3945_read_targ_mem(priv, base);
4336 mode = iwl3945_read_targ_mem(priv, base + (1 * sizeof(u32)));
4337 num_wraps = iwl3945_read_targ_mem(priv, base + (2 * sizeof(u32)));
4338 next_entry = iwl3945_read_targ_mem(priv, base + (3 * sizeof(u32)));
4340 size = num_wraps ? capacity : next_entry;
4342 /* bail out if nothing in log */
4344 IWL_ERROR("Start IWL Event Log Dump: nothing in log\n");
4345 iwl3945_release_nic_access(priv);
4349 IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n",
4352 /* if uCode has wrapped back to top of log, start at the oldest entry,
4353 * i.e the next one that uCode would fill. */
4355 iwl3945_print_event_log(priv, next_entry,
4356 capacity - next_entry, mode);
4358 /* (then/else) start at top of log */
4359 iwl3945_print_event_log(priv, 0, next_entry, mode);
4361 iwl3945_release_nic_access(priv);
4365 * iwl3945_irq_handle_error - called for HW or SW error interrupt from card
4367 static void iwl3945_irq_handle_error(struct iwl3945_priv *priv)
4369 /* Set the FW error flag -- cleared on iwl3945_down */
4370 set_bit(STATUS_FW_ERROR, &priv->status);
4372 /* Cancel currently queued command. */
4373 clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
4375 #ifdef CONFIG_IWL3945_DEBUG
4376 if (iwl3945_debug_level & IWL_DL_FW_ERRORS) {
4377 iwl3945_dump_nic_error_log(priv);
4378 iwl3945_dump_nic_event_log(priv);
4379 iwl3945_print_rx_config_cmd(&priv->staging_rxon);
4383 wake_up_interruptible(&priv->wait_command_queue);
4385 /* Keep the restart process from trying to send host
4386 * commands by clearing the INIT status bit */
4387 clear_bit(STATUS_READY, &priv->status);
4389 if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
4390 IWL_DEBUG(IWL_DL_INFO | IWL_DL_FW_ERRORS,
4391 "Restarting adapter due to uCode error.\n");
4393 if (iwl3945_is_associated(priv)) {
4394 memcpy(&priv->recovery_rxon, &priv->active_rxon,
4395 sizeof(priv->recovery_rxon));
4396 priv->error_recovering = 1;
4398 queue_work(priv->workqueue, &priv->restart);
4402 static void iwl3945_error_recovery(struct iwl3945_priv *priv)
4404 unsigned long flags;
4406 memcpy(&priv->staging_rxon, &priv->recovery_rxon,
4407 sizeof(priv->staging_rxon));
4408 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
4409 iwl3945_commit_rxon(priv);
4411 iwl3945_add_station(priv, priv->bssid, 1, 0);
4413 spin_lock_irqsave(&priv->lock, flags);
4414 priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id);
4415 priv->error_recovering = 0;
4416 spin_unlock_irqrestore(&priv->lock, flags);
4419 static void iwl3945_irq_tasklet(struct iwl3945_priv *priv)
4421 u32 inta, handled = 0;
4423 unsigned long flags;
4424 #ifdef CONFIG_IWL3945_DEBUG
4428 spin_lock_irqsave(&priv->lock, flags);
4430 /* Ack/clear/reset pending uCode interrupts.
4431 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
4432 * and will clear only when CSR_FH_INT_STATUS gets cleared. */
4433 inta = iwl3945_read32(priv, CSR_INT);
4434 iwl3945_write32(priv, CSR_INT, inta);
4436 /* Ack/clear/reset pending flow-handler (DMA) interrupts.
4437 * Any new interrupts that happen after this, either while we're
4438 * in this tasklet, or later, will show up in next ISR/tasklet. */
4439 inta_fh = iwl3945_read32(priv, CSR_FH_INT_STATUS);
4440 iwl3945_write32(priv, CSR_FH_INT_STATUS, inta_fh);
4442 #ifdef CONFIG_IWL3945_DEBUG
4443 if (iwl3945_debug_level & IWL_DL_ISR) {
4444 /* just for debug */
4445 inta_mask = iwl3945_read32(priv, CSR_INT_MASK);
4446 IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
4447 inta, inta_mask, inta_fh);
4451 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
4452 * atomic, make sure that inta covers all the interrupts that
4453 * we've discovered, even if FH interrupt came in just after
4454 * reading CSR_INT. */
4455 if (inta_fh & CSR39_FH_INT_RX_MASK)
4456 inta |= CSR_INT_BIT_FH_RX;
4457 if (inta_fh & CSR39_FH_INT_TX_MASK)
4458 inta |= CSR_INT_BIT_FH_TX;
4460 /* Now service all interrupt bits discovered above. */
4461 if (inta & CSR_INT_BIT_HW_ERR) {
4462 IWL_ERROR("Microcode HW error detected. Restarting.\n");
4464 /* Tell the device to stop sending interrupts */
4465 iwl3945_disable_interrupts(priv);
4467 iwl3945_irq_handle_error(priv);
4469 handled |= CSR_INT_BIT_HW_ERR;
4471 spin_unlock_irqrestore(&priv->lock, flags);
4476 #ifdef CONFIG_IWL3945_DEBUG
4477 if (iwl3945_debug_level & (IWL_DL_ISR)) {
4478 /* NIC fires this, but we don't use it, redundant with WAKEUP */
4479 if (inta & CSR_INT_BIT_SCD)
4480 IWL_DEBUG_ISR("Scheduler finished to transmit "
4481 "the frame/frames.\n");
4483 /* Alive notification via Rx interrupt will do the real work */
4484 if (inta & CSR_INT_BIT_ALIVE)
4485 IWL_DEBUG_ISR("Alive interrupt\n");
4488 /* Safely ignore these bits for debug checks below */
4489 inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
4491 /* HW RF KILL switch toggled (4965 only) */
4492 if (inta & CSR_INT_BIT_RF_KILL) {
4494 if (!(iwl3945_read32(priv, CSR_GP_CNTRL) &
4495 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
4498 IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL | IWL_DL_ISR,
4499 "RF_KILL bit toggled to %s.\n",
4500 hw_rf_kill ? "disable radio":"enable radio");
4502 /* Queue restart only if RF_KILL switch was set to "kill"
4503 * when we loaded driver, and is now set to "enable".
4504 * After we're Alive, RF_KILL gets handled by
4505 * iwl3945_rx_card_state_notif() */
4506 if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) {
4507 clear_bit(STATUS_RF_KILL_HW, &priv->status);
4508 queue_work(priv->workqueue, &priv->restart);
4511 handled |= CSR_INT_BIT_RF_KILL;
4514 /* Chip got too hot and stopped itself (4965 only) */
4515 if (inta & CSR_INT_BIT_CT_KILL) {
4516 IWL_ERROR("Microcode CT kill error detected.\n");
4517 handled |= CSR_INT_BIT_CT_KILL;
4520 /* Error detected by uCode */
4521 if (inta & CSR_INT_BIT_SW_ERR) {
4522 IWL_ERROR("Microcode SW error detected. Restarting 0x%X.\n",
4524 iwl3945_irq_handle_error(priv);
4525 handled |= CSR_INT_BIT_SW_ERR;
4528 /* uCode wakes up after power-down sleep */
4529 if (inta & CSR_INT_BIT_WAKEUP) {
4530 IWL_DEBUG_ISR("Wakeup interrupt\n");
4531 iwl3945_rx_queue_update_write_ptr(priv, &priv->rxq);
4532 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[0]);
4533 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[1]);
4534 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[2]);
4535 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[3]);
4536 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[4]);
4537 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[5]);
4539 handled |= CSR_INT_BIT_WAKEUP;
4542 /* All uCode command responses, including Tx command responses,
4543 * Rx "responses" (frame-received notification), and other
4544 * notifications from uCode come through here*/
4545 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
4546 iwl3945_rx_handle(priv);
4547 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
4550 if (inta & CSR_INT_BIT_FH_TX) {
4551 IWL_DEBUG_ISR("Tx interrupt\n");
4553 iwl3945_write32(priv, CSR_FH_INT_STATUS, (1 << 6));
4554 if (!iwl3945_grab_nic_access(priv)) {
4555 iwl3945_write_direct32(priv,
4557 (ALM_FH_SRVC_CHNL), 0x0);
4558 iwl3945_release_nic_access(priv);
4560 handled |= CSR_INT_BIT_FH_TX;
4563 if (inta & ~handled)
4564 IWL_ERROR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
4566 if (inta & ~CSR_INI_SET_MASK) {
4567 IWL_WARNING("Disabled INTA bits 0x%08x were pending\n",
4568 inta & ~CSR_INI_SET_MASK);
4569 IWL_WARNING(" with FH_INT = 0x%08x\n", inta_fh);
4572 /* Re-enable all interrupts */
4573 /* only Re-enable if disabled by irq */
4574 if (test_bit(STATUS_INT_ENABLED, &priv->status))
4575 iwl3945_enable_interrupts(priv);
4577 #ifdef CONFIG_IWL3945_DEBUG
4578 if (iwl3945_debug_level & (IWL_DL_ISR)) {
4579 inta = iwl3945_read32(priv, CSR_INT);
4580 inta_mask = iwl3945_read32(priv, CSR_INT_MASK);
4581 inta_fh = iwl3945_read32(priv, CSR_FH_INT_STATUS);
4582 IWL_DEBUG_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
4583 "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
4586 spin_unlock_irqrestore(&priv->lock, flags);
4589 static irqreturn_t iwl3945_isr(int irq, void *data)
4591 struct iwl3945_priv *priv = data;
4592 u32 inta, inta_mask;
4597 spin_lock(&priv->lock);
4599 /* Disable (but don't clear!) interrupts here to avoid
4600 * back-to-back ISRs and sporadic interrupts from our NIC.
4601 * If we have something to service, the tasklet will re-enable ints.
4602 * If we *don't* have something, we'll re-enable before leaving here. */
4603 inta_mask = iwl3945_read32(priv, CSR_INT_MASK); /* just for debug */
4604 iwl3945_write32(priv, CSR_INT_MASK, 0x00000000);
4606 /* Discover which interrupts are active/pending */
4607 inta = iwl3945_read32(priv, CSR_INT);
4608 inta_fh = iwl3945_read32(priv, CSR_FH_INT_STATUS);
4610 /* Ignore interrupt if there's nothing in NIC to service.
4611 * This may be due to IRQ shared with another device,
4612 * or due to sporadic interrupts thrown from our NIC. */
4613 if (!inta && !inta_fh) {
4614 IWL_DEBUG_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n");
4618 if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
4619 /* Hardware disappeared */
4620 IWL_WARNING("HARDWARE GONE?? INTA == 0x%080x\n", inta);
4624 IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
4625 inta, inta_mask, inta_fh);
4627 inta &= ~CSR_INT_BIT_SCD;
4629 /* iwl3945_irq_tasklet() will service interrupts and re-enable them */
4630 if (likely(inta || inta_fh))
4631 tasklet_schedule(&priv->irq_tasklet);
4633 spin_unlock(&priv->lock);
4638 /* re-enable interrupts here since we don't have anything to service. */
4639 /* only Re-enable if disabled by irq */
4640 if (test_bit(STATUS_INT_ENABLED, &priv->status))
4641 iwl3945_enable_interrupts(priv);
4642 spin_unlock(&priv->lock);
4646 /************************** EEPROM BANDS ****************************
4648 * The iwl3945_eeprom_band definitions below provide the mapping from the
4649 * EEPROM contents to the specific channel number supported for each
4652 * For example, iwl3945_priv->eeprom.band_3_channels[4] from the band_3
4653 * definition below maps to physical channel 42 in the 5.2GHz spectrum.
4654 * The specific geography and calibration information for that channel
4655 * is contained in the eeprom map itself.
4657 * During init, we copy the eeprom information and channel map
4658 * information into priv->channel_info_24/52 and priv->channel_map_24/52
4660 * channel_map_24/52 provides the index in the channel_info array for a
4661 * given channel. We have to have two separate maps as there is channel
4662 * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
4665 * A value of 0xff stored in the channel_map indicates that the channel
4666 * is not supported by the hardware at all.
4668 * A value of 0xfe in the channel_map indicates that the channel is not
4669 * valid for Tx with the current hardware. This means that
4670 * while the system can tune and receive on a given channel, it may not
4671 * be able to associate or transmit any frames on that
4672 * channel. There is no corresponding channel information for that
4675 *********************************************************************/
4678 static const u8 iwl3945_eeprom_band_1[14] = {
4679 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
4683 static const u8 iwl3945_eeprom_band_2[] = { /* 4915-5080MHz */
4684 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
4687 static const u8 iwl3945_eeprom_band_3[] = { /* 5170-5320MHz */
4688 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
4691 static const u8 iwl3945_eeprom_band_4[] = { /* 5500-5700MHz */
4692 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
4695 static const u8 iwl3945_eeprom_band_5[] = { /* 5725-5825MHz */
4696 145, 149, 153, 157, 161, 165
4699 static void iwl3945_init_band_reference(const struct iwl3945_priv *priv, int band,
4700 int *eeprom_ch_count,
4701 const struct iwl3945_eeprom_channel
4703 const u8 **eeprom_ch_index)
4706 case 1: /* 2.4GHz band */
4707 *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_1);
4708 *eeprom_ch_info = priv->eeprom.band_1_channels;
4709 *eeprom_ch_index = iwl3945_eeprom_band_1;
4711 case 2: /* 4.9GHz band */
4712 *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_2);
4713 *eeprom_ch_info = priv->eeprom.band_2_channels;
4714 *eeprom_ch_index = iwl3945_eeprom_band_2;
4716 case 3: /* 5.2GHz band */
4717 *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_3);
4718 *eeprom_ch_info = priv->eeprom.band_3_channels;
4719 *eeprom_ch_index = iwl3945_eeprom_band_3;
4721 case 4: /* 5.5GHz band */
4722 *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_4);
4723 *eeprom_ch_info = priv->eeprom.band_4_channels;
4724 *eeprom_ch_index = iwl3945_eeprom_band_4;
4726 case 5: /* 5.7GHz band */
4727 *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_5);
4728 *eeprom_ch_info = priv->eeprom.band_5_channels;
4729 *eeprom_ch_index = iwl3945_eeprom_band_5;
4738 * iwl3945_get_channel_info - Find driver's private channel info
4740 * Based on band and channel number.
4742 const struct iwl3945_channel_info *iwl3945_get_channel_info(const struct iwl3945_priv *priv,
4743 enum ieee80211_band band, u16 channel)
4748 case IEEE80211_BAND_5GHZ:
4749 for (i = 14; i < priv->channel_count; i++) {
4750 if (priv->channel_info[i].channel == channel)
4751 return &priv->channel_info[i];
4755 case IEEE80211_BAND_2GHZ:
4756 if (channel >= 1 && channel <= 14)
4757 return &priv->channel_info[channel - 1];
4759 case IEEE80211_NUM_BANDS:
4766 #define CHECK_AND_PRINT(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
4770 * iwl3945_init_channel_map - Set up driver's info for all possible channels
4772 static int iwl3945_init_channel_map(struct iwl3945_priv *priv)
4774 int eeprom_ch_count = 0;
4775 const u8 *eeprom_ch_index = NULL;
4776 const struct iwl3945_eeprom_channel *eeprom_ch_info = NULL;
4778 struct iwl3945_channel_info *ch_info;
4780 if (priv->channel_count) {
4781 IWL_DEBUG_INFO("Channel map already initialized.\n");
4785 if (priv->eeprom.version < 0x2f) {
4786 IWL_WARNING("Unsupported EEPROM version: 0x%04X\n",
4787 priv->eeprom.version);
4791 IWL_DEBUG_INFO("Initializing regulatory info from EEPROM\n");
4793 priv->channel_count =
4794 ARRAY_SIZE(iwl3945_eeprom_band_1) +
4795 ARRAY_SIZE(iwl3945_eeprom_band_2) +
4796 ARRAY_SIZE(iwl3945_eeprom_band_3) +
4797 ARRAY_SIZE(iwl3945_eeprom_band_4) +
4798 ARRAY_SIZE(iwl3945_eeprom_band_5);
4800 IWL_DEBUG_INFO("Parsing data for %d channels.\n", priv->channel_count);
4802 priv->channel_info = kzalloc(sizeof(struct iwl3945_channel_info) *
4803 priv->channel_count, GFP_KERNEL);
4804 if (!priv->channel_info) {
4805 IWL_ERROR("Could not allocate channel_info\n");
4806 priv->channel_count = 0;
4810 ch_info = priv->channel_info;
4812 /* Loop through the 5 EEPROM bands adding them in order to the
4813 * channel map we maintain (that contains additional information than
4814 * what just in the EEPROM) */
4815 for (band = 1; band <= 5; band++) {
4817 iwl3945_init_band_reference(priv, band, &eeprom_ch_count,
4818 &eeprom_ch_info, &eeprom_ch_index);
4820 /* Loop through each band adding each of the channels */
4821 for (ch = 0; ch < eeprom_ch_count; ch++) {
4822 ch_info->channel = eeprom_ch_index[ch];
4823 ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ :
4824 IEEE80211_BAND_5GHZ;
4826 /* permanently store EEPROM's channel regulatory flags
4827 * and max power in channel info database. */
4828 ch_info->eeprom = eeprom_ch_info[ch];
4830 /* Copy the run-time flags so they are there even on
4831 * invalid channels */
4832 ch_info->flags = eeprom_ch_info[ch].flags;
4834 if (!(is_channel_valid(ch_info))) {
4835 IWL_DEBUG_INFO("Ch. %d Flags %x [%sGHz] - "
4839 is_channel_a_band(ch_info) ?
4845 /* Initialize regulatory-based run-time data */
4846 ch_info->max_power_avg = ch_info->curr_txpow =
4847 eeprom_ch_info[ch].max_power_avg;
4848 ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
4849 ch_info->min_power = 0;
4851 IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s%s(0x%02x"
4852 " %ddBm): Ad-Hoc %ssupported\n",
4854 is_channel_a_band(ch_info) ?
4856 CHECK_AND_PRINT(VALID),
4857 CHECK_AND_PRINT(IBSS),
4858 CHECK_AND_PRINT(ACTIVE),
4859 CHECK_AND_PRINT(RADAR),
4860 CHECK_AND_PRINT(WIDE),
4861 CHECK_AND_PRINT(NARROW),
4862 CHECK_AND_PRINT(DFS),
4863 eeprom_ch_info[ch].flags,
4864 eeprom_ch_info[ch].max_power_avg,
4865 ((eeprom_ch_info[ch].
4866 flags & EEPROM_CHANNEL_IBSS)
4867 && !(eeprom_ch_info[ch].
4868 flags & EEPROM_CHANNEL_RADAR))
4871 /* Set the user_txpower_limit to the highest power
4872 * supported by any channel */
4873 if (eeprom_ch_info[ch].max_power_avg >
4874 priv->user_txpower_limit)
4875 priv->user_txpower_limit =
4876 eeprom_ch_info[ch].max_power_avg;
4882 /* Set up txpower settings in driver for all channels */
4883 if (iwl3945_txpower_set_from_eeprom(priv))
4890 * iwl3945_free_channel_map - undo allocations in iwl3945_init_channel_map
4892 static void iwl3945_free_channel_map(struct iwl3945_priv *priv)
4894 kfree(priv->channel_info);
4895 priv->channel_count = 0;
4898 /* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
4899 * sending probe req. This should be set long enough to hear probe responses
4900 * from more than one AP. */
4901 #define IWL_ACTIVE_DWELL_TIME_24 (20) /* all times in msec */
4902 #define IWL_ACTIVE_DWELL_TIME_52 (10)
4904 /* For faster active scanning, scan will move to the next channel if fewer than
4905 * PLCP_QUIET_THRESH packets are heard on this channel within
4906 * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
4907 * time if it's a quiet channel (nothing responded to our probe, and there's
4908 * no other traffic).
4909 * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
4910 #define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */
4911 #define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(5) /* msec */
4913 /* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
4914 * Must be set longer than active dwell time.
4915 * For the most reliable scan, set > AP beacon interval (typically 100msec). */
4916 #define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
4917 #define IWL_PASSIVE_DWELL_TIME_52 (10)
4918 #define IWL_PASSIVE_DWELL_BASE (100)
4919 #define IWL_CHANNEL_TUNE_TIME 5
4921 static inline u16 iwl3945_get_active_dwell_time(struct iwl3945_priv *priv,
4922 enum ieee80211_band band)
4924 if (band == IEEE80211_BAND_5GHZ)
4925 return IWL_ACTIVE_DWELL_TIME_52;
4927 return IWL_ACTIVE_DWELL_TIME_24;
4930 static u16 iwl3945_get_passive_dwell_time(struct iwl3945_priv *priv,
4931 enum ieee80211_band band)
4933 u16 active = iwl3945_get_active_dwell_time(priv, band);
4934 u16 passive = (band == IEEE80211_BAND_2GHZ) ?
4935 IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
4936 IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
4938 if (iwl3945_is_associated(priv)) {
4939 /* If we're associated, we clamp the maximum passive
4940 * dwell time to be 98% of the beacon interval (minus
4941 * 2 * channel tune time) */
4942 passive = priv->beacon_int;
4943 if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive)
4944 passive = IWL_PASSIVE_DWELL_BASE;
4945 passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
4948 if (passive <= active)
4949 passive = active + 1;
4954 static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv,
4955 enum ieee80211_band band,
4956 u8 is_active, u8 direct_mask,
4957 struct iwl3945_scan_channel *scan_ch)
4959 const struct ieee80211_channel *channels = NULL;
4960 const struct ieee80211_supported_band *sband;
4961 const struct iwl3945_channel_info *ch_info;
4962 u16 passive_dwell = 0;
4963 u16 active_dwell = 0;
4966 sband = iwl3945_get_band(priv, band);
4970 channels = sband->channels;
4972 active_dwell = iwl3945_get_active_dwell_time(priv, band);
4973 passive_dwell = iwl3945_get_passive_dwell_time(priv, band);
4975 for (i = 0, added = 0; i < sband->n_channels; i++) {
4976 if (channels[i].flags & IEEE80211_CHAN_DISABLED)
4979 scan_ch->channel = channels[i].hw_value;
4981 ch_info = iwl3945_get_channel_info(priv, band, scan_ch->channel);
4982 if (!is_channel_valid(ch_info)) {
4983 IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
4988 if (!is_active || is_channel_passive(ch_info) ||
4989 (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN))
4990 scan_ch->type = 0; /* passive */
4992 scan_ch->type = 1; /* active */
4994 if (scan_ch->type & 1)
4995 scan_ch->type |= (direct_mask << 1);
4997 if (is_channel_narrow(ch_info))
4998 scan_ch->type |= (1 << 7);
5000 scan_ch->active_dwell = cpu_to_le16(active_dwell);
5001 scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
5003 /* Set txpower levels to defaults */
5004 scan_ch->tpc.dsp_atten = 110;
5005 /* scan_pwr_info->tpc.dsp_atten; */
5007 /*scan_pwr_info->tpc.tx_gain; */
5008 if (band == IEEE80211_BAND_5GHZ)
5009 scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
5011 scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
5012 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
5014 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
5018 IWL_DEBUG_SCAN("Scanning %d [%s %d]\n",
5020 (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
5021 (scan_ch->type & 1) ?
5022 active_dwell : passive_dwell);
5028 IWL_DEBUG_SCAN("total channels to scan %d \n", added);
5032 static void iwl3945_init_hw_rates(struct iwl3945_priv *priv,
5033 struct ieee80211_rate *rates)
5037 for (i = 0; i < IWL_RATE_COUNT; i++) {
5038 rates[i].bitrate = iwl3945_rates[i].ieee * 5;
5039 rates[i].hw_value = i; /* Rate scaling will work on indexes */
5040 rates[i].hw_value_short = i;
5042 if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
5044 * If CCK != 1M then set short preamble rate flag.
5046 rates[i].flags |= (iwl3945_rates[i].plcp == 10) ?
5047 0 : IEEE80211_RATE_SHORT_PREAMBLE;
5053 * iwl3945_init_geos - Initialize mac80211's geo/channel info based from eeprom
5055 static int iwl3945_init_geos(struct iwl3945_priv *priv)
5057 struct iwl3945_channel_info *ch;
5058 struct ieee80211_supported_band *sband;
5059 struct ieee80211_channel *channels;
5060 struct ieee80211_channel *geo_ch;
5061 struct ieee80211_rate *rates;
5064 if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
5065 priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
5066 IWL_DEBUG_INFO("Geography modes already initialized.\n");
5067 set_bit(STATUS_GEO_CONFIGURED, &priv->status);
5071 channels = kzalloc(sizeof(struct ieee80211_channel) *
5072 priv->channel_count, GFP_KERNEL);
5076 rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
5083 /* 5.2GHz channels start after the 2.4GHz channels */
5084 sband = &priv->bands[IEEE80211_BAND_5GHZ];
5085 sband->channels = &channels[ARRAY_SIZE(iwl3945_eeprom_band_1)];
5087 sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
5088 sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
5090 sband = &priv->bands[IEEE80211_BAND_2GHZ];
5091 sband->channels = channels;
5093 sband->bitrates = rates;
5094 sband->n_bitrates = IWL_RATE_COUNT;
5096 priv->ieee_channels = channels;
5097 priv->ieee_rates = rates;
5099 iwl3945_init_hw_rates(priv, rates);
5101 for (i = 0; i < priv->channel_count; i++) {
5102 ch = &priv->channel_info[i];
5104 /* FIXME: might be removed if scan is OK*/
5105 if (!is_channel_valid(ch))
5108 if (is_channel_a_band(ch))
5109 sband = &priv->bands[IEEE80211_BAND_5GHZ];
5111 sband = &priv->bands[IEEE80211_BAND_2GHZ];
5113 geo_ch = &sband->channels[sband->n_channels++];
5115 geo_ch->center_freq = ieee80211_channel_to_frequency(ch->channel);
5116 geo_ch->max_power = ch->max_power_avg;
5117 geo_ch->max_antenna_gain = 0xff;
5118 geo_ch->hw_value = ch->channel;
5120 if (is_channel_valid(ch)) {
5121 if (!(ch->flags & EEPROM_CHANNEL_IBSS))
5122 geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
5124 if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
5125 geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
5127 if (ch->flags & EEPROM_CHANNEL_RADAR)
5128 geo_ch->flags |= IEEE80211_CHAN_RADAR;
5130 if (ch->max_power_avg > priv->max_channel_txpower_limit)
5131 priv->max_channel_txpower_limit =
5134 geo_ch->flags |= IEEE80211_CHAN_DISABLED;
5137 /* Save flags for reg domain usage */
5138 geo_ch->orig_flags = geo_ch->flags;
5140 IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0%X\n",
5141 ch->channel, geo_ch->center_freq,
5142 is_channel_a_band(ch) ? "5.2" : "2.4",
5143 geo_ch->flags & IEEE80211_CHAN_DISABLED ?
5144 "restricted" : "valid",
5148 if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
5149 priv->cfg->sku & IWL_SKU_A) {
5150 printk(KERN_INFO DRV_NAME
5151 ": Incorrectly detected BG card as ABG. Please send "
5152 "your PCI ID 0x%04X:0x%04X to maintainer.\n",
5153 priv->pci_dev->device, priv->pci_dev->subsystem_device);
5154 priv->cfg->sku &= ~IWL_SKU_A;
5157 printk(KERN_INFO DRV_NAME
5158 ": Tunable channels: %d 802.11bg, %d 802.11a channels\n",
5159 priv->bands[IEEE80211_BAND_2GHZ].n_channels,
5160 priv->bands[IEEE80211_BAND_5GHZ].n_channels);
5162 if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
5163 priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
5164 &priv->bands[IEEE80211_BAND_2GHZ];
5165 if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
5166 priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
5167 &priv->bands[IEEE80211_BAND_5GHZ];
5169 set_bit(STATUS_GEO_CONFIGURED, &priv->status);
5175 * iwl3945_free_geos - undo allocations in iwl3945_init_geos
5177 static void iwl3945_free_geos(struct iwl3945_priv *priv)
5179 kfree(priv->ieee_channels);
5180 kfree(priv->ieee_rates);
5181 clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
5184 /******************************************************************************
5186 * uCode download functions
5188 ******************************************************************************/
5190 static void iwl3945_dealloc_ucode_pci(struct iwl3945_priv *priv)
5192 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
5193 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
5194 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
5195 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
5196 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
5197 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
5201 * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host,
5202 * looking at all data.
5204 static int iwl3945_verify_inst_full(struct iwl3945_priv *priv, __le32 * image, u32 len)
5211 IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
5213 rc = iwl3945_grab_nic_access(priv);
5217 iwl3945_write_direct32(priv, HBUS_TARG_MEM_RADDR, RTC_INST_LOWER_BOUND);
5220 for (; len > 0; len -= sizeof(u32), image++) {
5221 /* read data comes through single port, auto-incr addr */
5222 /* NOTE: Use the debugless read so we don't flood kernel log
5223 * if IWL_DL_IO is set */
5224 val = _iwl3945_read_direct32(priv, HBUS_TARG_MEM_RDAT);
5225 if (val != le32_to_cpu(*image)) {
5226 IWL_ERROR("uCode INST section is invalid at "
5227 "offset 0x%x, is 0x%x, s/b 0x%x\n",
5228 save_len - len, val, le32_to_cpu(*image));
5236 iwl3945_release_nic_access(priv);
5239 IWL_DEBUG_INFO("ucode image in INSTRUCTION memory is good\n");
5246 * iwl3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
5247 * using sample data 100 bytes apart. If these sample points are good,
5248 * it's a pretty good bet that everything between them is good, too.
5250 static int iwl3945_verify_inst_sparse(struct iwl3945_priv *priv, __le32 *image, u32 len)
5257 IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
5259 rc = iwl3945_grab_nic_access(priv);
5263 for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
5264 /* read data comes through single port, auto-incr addr */
5265 /* NOTE: Use the debugless read so we don't flood kernel log
5266 * if IWL_DL_IO is set */
5267 iwl3945_write_direct32(priv, HBUS_TARG_MEM_RADDR,
5268 i + RTC_INST_LOWER_BOUND);
5269 val = _iwl3945_read_direct32(priv, HBUS_TARG_MEM_RDAT);
5270 if (val != le32_to_cpu(*image)) {
5271 #if 0 /* Enable this if you want to see details */
5272 IWL_ERROR("uCode INST section is invalid at "
5273 "offset 0x%x, is 0x%x, s/b 0x%x\n",
5283 iwl3945_release_nic_access(priv);
5290 * iwl3945_verify_ucode - determine which instruction image is in SRAM,
5291 * and verify its contents
5293 static int iwl3945_verify_ucode(struct iwl3945_priv *priv)
5300 image = (__le32 *)priv->ucode_boot.v_addr;
5301 len = priv->ucode_boot.len;
5302 rc = iwl3945_verify_inst_sparse(priv, image, len);
5304 IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
5308 /* Try initialize */
5309 image = (__le32 *)priv->ucode_init.v_addr;
5310 len = priv->ucode_init.len;
5311 rc = iwl3945_verify_inst_sparse(priv, image, len);
5313 IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
5317 /* Try runtime/protocol */
5318 image = (__le32 *)priv->ucode_code.v_addr;
5319 len = priv->ucode_code.len;
5320 rc = iwl3945_verify_inst_sparse(priv, image, len);
5322 IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
5326 IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
5328 /* Since nothing seems to match, show first several data entries in
5329 * instruction SRAM, so maybe visual inspection will give a clue.
5330 * Selection of bootstrap image (vs. other images) is arbitrary. */
5331 image = (__le32 *)priv->ucode_boot.v_addr;
5332 len = priv->ucode_boot.len;
5333 rc = iwl3945_verify_inst_full(priv, image, len);
5339 /* check contents of special bootstrap uCode SRAM */
5340 static int iwl3945_verify_bsm(struct iwl3945_priv *priv)
5342 __le32 *image = priv->ucode_boot.v_addr;
5343 u32 len = priv->ucode_boot.len;
5347 IWL_DEBUG_INFO("Begin verify bsm\n");
5349 /* verify BSM SRAM contents */
5350 val = iwl3945_read_prph(priv, BSM_WR_DWCOUNT_REG);
5351 for (reg = BSM_SRAM_LOWER_BOUND;
5352 reg < BSM_SRAM_LOWER_BOUND + len;
5353 reg += sizeof(u32), image ++) {
5354 val = iwl3945_read_prph(priv, reg);
5355 if (val != le32_to_cpu(*image)) {
5356 IWL_ERROR("BSM uCode verification failed at "
5357 "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
5358 BSM_SRAM_LOWER_BOUND,
5359 reg - BSM_SRAM_LOWER_BOUND, len,
5360 val, le32_to_cpu(*image));
5365 IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n");
5371 * iwl3945_load_bsm - Load bootstrap instructions
5375 * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
5376 * in special SRAM that does not power down during RFKILL. When powering back
5377 * up after power-saving sleeps (or during initial uCode load), the BSM loads
5378 * the bootstrap program into the on-board processor, and starts it.
5380 * The bootstrap program loads (via DMA) instructions and data for a new
5381 * program from host DRAM locations indicated by the host driver in the
5382 * BSM_DRAM_* registers. Once the new program is loaded, it starts
5385 * When initializing the NIC, the host driver points the BSM to the
5386 * "initialize" uCode image. This uCode sets up some internal data, then
5387 * notifies host via "initialize alive" that it is complete.
5389 * The host then replaces the BSM_DRAM_* pointer values to point to the
5390 * normal runtime uCode instructions and a backup uCode data cache buffer
5391 * (filled initially with starting data values for the on-board processor),
5392 * then triggers the "initialize" uCode to load and launch the runtime uCode,
5393 * which begins normal operation.
5395 * When doing a power-save shutdown, runtime uCode saves data SRAM into
5396 * the backup data cache in DRAM before SRAM is powered down.
5398 * When powering back up, the BSM loads the bootstrap program. This reloads
5399 * the runtime uCode instructions and the backup data cache into SRAM,
5400 * and re-launches the runtime uCode from where it left off.
5402 static int iwl3945_load_bsm(struct iwl3945_priv *priv)
5404 __le32 *image = priv->ucode_boot.v_addr;
5405 u32 len = priv->ucode_boot.len;
5415 IWL_DEBUG_INFO("Begin load bsm\n");
5417 /* make sure bootstrap program is no larger than BSM's SRAM size */
5418 if (len > IWL_MAX_BSM_SIZE)
5421 /* Tell bootstrap uCode where to find the "Initialize" uCode
5422 * in host DRAM ... host DRAM physical address bits 31:0 for 3945.
5423 * NOTE: iwl3945_initialize_alive_start() will replace these values,
5424 * after the "initialize" uCode has run, to point to
5425 * runtime/protocol instructions and backup data cache. */
5426 pinst = priv->ucode_init.p_addr;
5427 pdata = priv->ucode_init_data.p_addr;
5428 inst_len = priv->ucode_init.len;
5429 data_len = priv->ucode_init_data.len;
5431 rc = iwl3945_grab_nic_access(priv);
5435 iwl3945_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
5436 iwl3945_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
5437 iwl3945_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
5438 iwl3945_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
5440 /* Fill BSM memory with bootstrap instructions */
5441 for (reg_offset = BSM_SRAM_LOWER_BOUND;
5442 reg_offset < BSM_SRAM_LOWER_BOUND + len;
5443 reg_offset += sizeof(u32), image++)
5444 _iwl3945_write_prph(priv, reg_offset,
5445 le32_to_cpu(*image));
5447 rc = iwl3945_verify_bsm(priv);
5449 iwl3945_release_nic_access(priv);
5453 /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
5454 iwl3945_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
5455 iwl3945_write_prph(priv, BSM_WR_MEM_DST_REG,
5456 RTC_INST_LOWER_BOUND);
5457 iwl3945_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
5459 /* Load bootstrap code into instruction SRAM now,
5460 * to prepare to load "initialize" uCode */
5461 iwl3945_write_prph(priv, BSM_WR_CTRL_REG,
5462 BSM_WR_CTRL_REG_BIT_START);
5464 /* Wait for load of bootstrap uCode to finish */
5465 for (i = 0; i < 100; i++) {
5466 done = iwl3945_read_prph(priv, BSM_WR_CTRL_REG);
5467 if (!(done & BSM_WR_CTRL_REG_BIT_START))
5472 IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i);
5474 IWL_ERROR("BSM write did not complete!\n");
5478 /* Enable future boot loads whenever power management unit triggers it
5479 * (e.g. when powering back up after power-save shutdown) */
5480 iwl3945_write_prph(priv, BSM_WR_CTRL_REG,
5481 BSM_WR_CTRL_REG_BIT_START_EN);
5483 iwl3945_release_nic_access(priv);
5488 static void iwl3945_nic_start(struct iwl3945_priv *priv)
5490 /* Remove all resets to allow NIC to operate */
5491 iwl3945_write32(priv, CSR_RESET, 0);
5495 * iwl3945_read_ucode - Read uCode images from disk file.
5497 * Copy into buffers for card to fetch via bus-mastering
5499 static int iwl3945_read_ucode(struct iwl3945_priv *priv)
5501 struct iwl3945_ucode *ucode;
5503 const struct firmware *ucode_raw;
5504 /* firmware file name contains uCode/driver compatibility version */
5505 const char *name = priv->cfg->fw_name;
5508 u32 ver, inst_size, data_size, init_size, init_data_size, boot_size;
5510 /* Ask kernel firmware_class module to get the boot firmware off disk.
5511 * request_firmware() is synchronous, file is in memory on return. */
5512 ret = request_firmware(&ucode_raw, name, &priv->pci_dev->dev);
5514 IWL_ERROR("%s firmware file req failed: Reason %d\n",
5519 IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n",
5520 name, ucode_raw->size);
5522 /* Make sure that we got at least our header! */
5523 if (ucode_raw->size < sizeof(*ucode)) {
5524 IWL_ERROR("File size way too small!\n");
5529 /* Data from ucode file: header followed by uCode images */
5530 ucode = (void *)ucode_raw->data;
5532 ver = le32_to_cpu(ucode->ver);
5533 inst_size = le32_to_cpu(ucode->inst_size);
5534 data_size = le32_to_cpu(ucode->data_size);
5535 init_size = le32_to_cpu(ucode->init_size);
5536 init_data_size = le32_to_cpu(ucode->init_data_size);
5537 boot_size = le32_to_cpu(ucode->boot_size);
5539 IWL_DEBUG_INFO("f/w package hdr ucode version = 0x%x\n", ver);
5540 IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n", inst_size);
5541 IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n", data_size);
5542 IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n", init_size);
5543 IWL_DEBUG_INFO("f/w package hdr init data size = %u\n", init_data_size);
5544 IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n", boot_size);
5546 /* Verify size of file vs. image size info in file's header */
5547 if (ucode_raw->size < sizeof(*ucode) +
5548 inst_size + data_size + init_size +
5549 init_data_size + boot_size) {
5551 IWL_DEBUG_INFO("uCode file size %d too small\n",
5552 (int)ucode_raw->size);
5557 /* Verify that uCode images will fit in card's SRAM */
5558 if (inst_size > IWL_MAX_INST_SIZE) {
5559 IWL_DEBUG_INFO("uCode instr len %d too large to fit in\n",
5565 if (data_size > IWL_MAX_DATA_SIZE) {
5566 IWL_DEBUG_INFO("uCode data len %d too large to fit in\n",
5571 if (init_size > IWL_MAX_INST_SIZE) {
5572 IWL_DEBUG_INFO("uCode init instr len %d too large to fit in\n",
5577 if (init_data_size > IWL_MAX_DATA_SIZE) {
5578 IWL_DEBUG_INFO("uCode init data len %d too large to fit in\n",
5583 if (boot_size > IWL_MAX_BSM_SIZE) {
5584 IWL_DEBUG_INFO("uCode boot instr len %d too large to fit in\n",
5590 /* Allocate ucode buffers for card's bus-master loading ... */
5592 /* Runtime instructions and 2 copies of data:
5593 * 1) unmodified from disk
5594 * 2) backup cache for save/restore during power-downs */
5595 priv->ucode_code.len = inst_size;
5596 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
5598 priv->ucode_data.len = data_size;
5599 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
5601 priv->ucode_data_backup.len = data_size;
5602 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
5604 if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
5605 !priv->ucode_data_backup.v_addr)
5608 /* Initialization instructions and data */
5609 if (init_size && init_data_size) {
5610 priv->ucode_init.len = init_size;
5611 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
5613 priv->ucode_init_data.len = init_data_size;
5614 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
5616 if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
5620 /* Bootstrap (instructions only, no data) */
5622 priv->ucode_boot.len = boot_size;
5623 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
5625 if (!priv->ucode_boot.v_addr)
5629 /* Copy images into buffers for card's bus-master reads ... */
5631 /* Runtime instructions (first block of data in file) */
5632 src = &ucode->data[0];
5633 len = priv->ucode_code.len;
5634 IWL_DEBUG_INFO("Copying (but not loading) uCode instr len %Zd\n", len);
5635 memcpy(priv->ucode_code.v_addr, src, len);
5636 IWL_DEBUG_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
5637 priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
5639 /* Runtime data (2nd block)
5640 * NOTE: Copy into backup buffer will be done in iwl3945_up() */
5641 src = &ucode->data[inst_size];
5642 len = priv->ucode_data.len;
5643 IWL_DEBUG_INFO("Copying (but not loading) uCode data len %Zd\n", len);
5644 memcpy(priv->ucode_data.v_addr, src, len);
5645 memcpy(priv->ucode_data_backup.v_addr, src, len);
5647 /* Initialization instructions (3rd block) */
5649 src = &ucode->data[inst_size + data_size];
5650 len = priv->ucode_init.len;
5651 IWL_DEBUG_INFO("Copying (but not loading) init instr len %Zd\n",
5653 memcpy(priv->ucode_init.v_addr, src, len);
5656 /* Initialization data (4th block) */
5657 if (init_data_size) {
5658 src = &ucode->data[inst_size + data_size + init_size];
5659 len = priv->ucode_init_data.len;
5660 IWL_DEBUG_INFO("Copying (but not loading) init data len %d\n",
5662 memcpy(priv->ucode_init_data.v_addr, src, len);
5665 /* Bootstrap instructions (5th block) */
5666 src = &ucode->data[inst_size + data_size + init_size + init_data_size];
5667 len = priv->ucode_boot.len;
5668 IWL_DEBUG_INFO("Copying (but not loading) boot instr len %d\n",
5670 memcpy(priv->ucode_boot.v_addr, src, len);
5672 /* We have our copies now, allow OS release its copies */
5673 release_firmware(ucode_raw);
5677 IWL_ERROR("failed to allocate pci memory\n");
5679 iwl3945_dealloc_ucode_pci(priv);
5682 release_firmware(ucode_raw);
5690 * iwl3945_set_ucode_ptrs - Set uCode address location
5692 * Tell initialization uCode where to find runtime uCode.
5694 * BSM registers initially contain pointers to initialization uCode.
5695 * We need to replace them to load runtime uCode inst and data,
5696 * and to save runtime data when powering down.
5698 static int iwl3945_set_ucode_ptrs(struct iwl3945_priv *priv)
5703 unsigned long flags;
5705 /* bits 31:0 for 3945 */
5706 pinst = priv->ucode_code.p_addr;
5707 pdata = priv->ucode_data_backup.p_addr;
5709 spin_lock_irqsave(&priv->lock, flags);
5710 rc = iwl3945_grab_nic_access(priv);
5712 spin_unlock_irqrestore(&priv->lock, flags);
5716 /* Tell bootstrap uCode where to find image to load */
5717 iwl3945_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
5718 iwl3945_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
5719 iwl3945_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
5720 priv->ucode_data.len);
5722 /* Inst bytecount must be last to set up, bit 31 signals uCode
5723 * that all new ptr/size info is in place */
5724 iwl3945_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
5725 priv->ucode_code.len | BSM_DRAM_INST_LOAD);
5727 iwl3945_release_nic_access(priv);
5729 spin_unlock_irqrestore(&priv->lock, flags);
5731 IWL_DEBUG_INFO("Runtime uCode pointers are set.\n");
5737 * iwl3945_init_alive_start - Called after REPLY_ALIVE notification received
5739 * Called after REPLY_ALIVE notification received from "initialize" uCode.
5741 * Tell "initialize" uCode to go ahead and load the runtime uCode.
5743 static void iwl3945_init_alive_start(struct iwl3945_priv *priv)
5745 /* Check alive response for "valid" sign from uCode */
5746 if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
5747 /* We had an error bringing up the hardware, so take it
5748 * all the way back down so we can try again */
5749 IWL_DEBUG_INFO("Initialize Alive failed.\n");
5753 /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
5754 * This is a paranoid check, because we would not have gotten the
5755 * "initialize" alive if code weren't properly loaded. */
5756 if (iwl3945_verify_ucode(priv)) {
5757 /* Runtime instruction load was bad;
5758 * take it all the way back down so we can try again */
5759 IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
5763 /* Send pointers to protocol/runtime uCode image ... init code will
5764 * load and launch runtime uCode, which will send us another "Alive"
5766 IWL_DEBUG_INFO("Initialization Alive received.\n");
5767 if (iwl3945_set_ucode_ptrs(priv)) {
5768 /* Runtime instruction load won't happen;
5769 * take it all the way back down so we can try again */
5770 IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n");
5776 queue_work(priv->workqueue, &priv->restart);
5781 * iwl3945_alive_start - called after REPLY_ALIVE notification received
5782 * from protocol/runtime uCode (initialization uCode's
5783 * Alive gets handled by iwl3945_init_alive_start()).
5785 static void iwl3945_alive_start(struct iwl3945_priv *priv)
5788 int thermal_spin = 0;
5791 IWL_DEBUG_INFO("Runtime Alive received.\n");
5793 if (priv->card_alive.is_valid != UCODE_VALID_OK) {
5794 /* We had an error bringing up the hardware, so take it
5795 * all the way back down so we can try again */
5796 IWL_DEBUG_INFO("Alive failed.\n");
5800 /* Initialize uCode has loaded Runtime uCode ... verify inst image.
5801 * This is a paranoid check, because we would not have gotten the
5802 * "runtime" alive if code weren't properly loaded. */
5803 if (iwl3945_verify_ucode(priv)) {
5804 /* Runtime instruction load was bad;
5805 * take it all the way back down so we can try again */
5806 IWL_DEBUG_INFO("Bad runtime uCode load.\n");
5810 iwl3945_clear_stations_table(priv);
5812 rc = iwl3945_grab_nic_access(priv);
5814 IWL_WARNING("Can not read rfkill status from adapter\n");
5818 rfkill = iwl3945_read_prph(priv, APMG_RFKILL_REG);
5819 IWL_DEBUG_INFO("RFKILL status: 0x%x\n", rfkill);
5820 iwl3945_release_nic_access(priv);
5823 clear_bit(STATUS_RF_KILL_HW, &priv->status);
5824 /* if rfkill is not on, then wait for thermal
5825 * sensor in adapter to kick in */
5826 while (iwl3945_hw_get_temperature(priv) == 0) {
5832 IWL_DEBUG_INFO("Thermal calibration took %dus\n",
5835 set_bit(STATUS_RF_KILL_HW, &priv->status);
5837 /* After the ALIVE response, we can send commands to 3945 uCode */
5838 set_bit(STATUS_ALIVE, &priv->status);
5840 /* Clear out the uCode error bit if it is set */
5841 clear_bit(STATUS_FW_ERROR, &priv->status);
5843 if (iwl3945_is_rfkill(priv))
5846 ieee80211_start_queues(priv->hw);
5848 priv->active_rate = priv->rates_mask;
5849 priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
5851 iwl3945_send_power_mode(priv, IWL_POWER_LEVEL(priv->power_mode));
5853 if (iwl3945_is_associated(priv)) {
5854 struct iwl3945_rxon_cmd *active_rxon =
5855 (struct iwl3945_rxon_cmd *)(&priv->active_rxon);
5857 memcpy(&priv->staging_rxon, &priv->active_rxon,
5858 sizeof(priv->staging_rxon));
5859 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
5861 /* Initialize our rx_config data */
5862 iwl3945_connection_init_rx_config(priv);
5863 memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
5866 /* Configure Bluetooth device coexistence support */
5867 iwl3945_send_bt_config(priv);
5869 /* Configure the adapter for unassociated operation */
5870 iwl3945_commit_rxon(priv);
5872 /* At this point, the NIC is initialized and operational */
5873 priv->notif_missed_beacons = 0;
5875 iwl3945_reg_txpower_periodic(priv);
5877 iwl3945_led_register(priv);
5879 IWL_DEBUG_INFO("ALIVE processing complete.\n");
5880 set_bit(STATUS_READY, &priv->status);
5881 wake_up_interruptible(&priv->wait_command_queue);
5883 if (priv->error_recovering)
5884 iwl3945_error_recovery(priv);
5886 ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
5890 queue_work(priv->workqueue, &priv->restart);
5893 static void iwl3945_cancel_deferred_work(struct iwl3945_priv *priv);
5895 static void __iwl3945_down(struct iwl3945_priv *priv)
5897 unsigned long flags;
5898 int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
5899 struct ieee80211_conf *conf = NULL;
5901 IWL_DEBUG_INFO(DRV_NAME " is going down\n");
5903 conf = ieee80211_get_hw_conf(priv->hw);
5906 set_bit(STATUS_EXIT_PENDING, &priv->status);
5908 iwl3945_led_unregister(priv);
5909 iwl3945_clear_stations_table(priv);
5911 /* Unblock any waiting calls */
5912 wake_up_interruptible_all(&priv->wait_command_queue);
5914 /* Wipe out the EXIT_PENDING status bit if we are not actually
5915 * exiting the module */
5917 clear_bit(STATUS_EXIT_PENDING, &priv->status);
5919 /* stop and reset the on-board processor */
5920 iwl3945_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
5922 /* tell the device to stop sending interrupts */
5923 spin_lock_irqsave(&priv->lock, flags);
5924 iwl3945_disable_interrupts(priv);
5925 spin_unlock_irqrestore(&priv->lock, flags);
5926 iwl_synchronize_irq(priv);
5928 if (priv->mac80211_registered)
5929 ieee80211_stop_queues(priv->hw);
5931 /* If we have not previously called iwl3945_init() then
5932 * clear all bits but the RF Kill and SUSPEND bits and return */
5933 if (!iwl3945_is_init(priv)) {
5934 priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
5936 test_bit(STATUS_RF_KILL_SW, &priv->status) <<
5938 test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
5939 STATUS_GEO_CONFIGURED |
5940 test_bit(STATUS_IN_SUSPEND, &priv->status) <<
5945 /* ...otherwise clear out all the status bits but the RF Kill and
5946 * SUSPEND bits and continue taking the NIC down. */
5947 priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
5949 test_bit(STATUS_RF_KILL_SW, &priv->status) <<
5951 test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
5952 STATUS_GEO_CONFIGURED |
5953 test_bit(STATUS_IN_SUSPEND, &priv->status) <<
5955 test_bit(STATUS_FW_ERROR, &priv->status) <<
5958 spin_lock_irqsave(&priv->lock, flags);
5959 iwl3945_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
5960 spin_unlock_irqrestore(&priv->lock, flags);
5962 iwl3945_hw_txq_ctx_stop(priv);
5963 iwl3945_hw_rxq_stop(priv);
5965 spin_lock_irqsave(&priv->lock, flags);
5966 if (!iwl3945_grab_nic_access(priv)) {
5967 iwl3945_write_prph(priv, APMG_CLK_DIS_REG,
5968 APMG_CLK_VAL_DMA_CLK_RQT);
5969 iwl3945_release_nic_access(priv);
5971 spin_unlock_irqrestore(&priv->lock, flags);
5975 iwl3945_hw_nic_stop_master(priv);
5976 iwl3945_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
5977 iwl3945_hw_nic_reset(priv);
5980 memset(&priv->card_alive, 0, sizeof(struct iwl3945_alive_resp));
5982 if (priv->ibss_beacon)
5983 dev_kfree_skb(priv->ibss_beacon);
5984 priv->ibss_beacon = NULL;
5986 /* clear out any free frames */
5987 iwl3945_clear_free_frames(priv);
5990 static void iwl3945_down(struct iwl3945_priv *priv)
5992 mutex_lock(&priv->mutex);
5993 __iwl3945_down(priv);
5994 mutex_unlock(&priv->mutex);
5996 iwl3945_cancel_deferred_work(priv);
5999 #define MAX_HW_RESTARTS 5
6001 static int __iwl3945_up(struct iwl3945_priv *priv)
6005 if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
6006 IWL_WARNING("Exit pending; will not bring the NIC up\n");
6010 if (test_bit(STATUS_RF_KILL_SW, &priv->status)) {
6011 IWL_WARNING("Radio disabled by SW RF kill (module "
6016 if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
6017 IWL_ERROR("ucode not available for device bringup\n");
6021 /* If platform's RF_KILL switch is NOT set to KILL */
6022 if (iwl3945_read32(priv, CSR_GP_CNTRL) &
6023 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
6024 clear_bit(STATUS_RF_KILL_HW, &priv->status);
6026 set_bit(STATUS_RF_KILL_HW, &priv->status);
6027 if (!test_bit(STATUS_IN_SUSPEND, &priv->status)) {
6028 IWL_WARNING("Radio disabled by HW RF Kill switch\n");
6033 iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF);
6035 rc = iwl3945_hw_nic_init(priv);
6037 IWL_ERROR("Unable to int nic\n");
6041 /* make sure rfkill handshake bits are cleared */
6042 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
6043 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR,
6044 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
6046 /* clear (again), then enable host interrupts */
6047 iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF);
6048 iwl3945_enable_interrupts(priv);
6050 /* really make sure rfkill handshake bits are cleared */
6051 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
6052 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
6054 /* Copy original ucode data image from disk into backup cache.
6055 * This will be used to initialize the on-board processor's
6056 * data SRAM for a clean start when the runtime program first loads. */
6057 memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
6058 priv->ucode_data.len);
6060 /* We return success when we resume from suspend and rf_kill is on. */
6061 if (test_bit(STATUS_RF_KILL_HW, &priv->status))
6064 for (i = 0; i < MAX_HW_RESTARTS; i++) {
6066 iwl3945_clear_stations_table(priv);
6068 /* load bootstrap state machine,
6069 * load bootstrap program into processor's memory,
6070 * prepare to load the "initialize" uCode */
6071 rc = iwl3945_load_bsm(priv);
6074 IWL_ERROR("Unable to set up bootstrap uCode: %d\n", rc);
6078 /* start card; "initialize" will load runtime ucode */
6079 iwl3945_nic_start(priv);
6081 IWL_DEBUG_INFO(DRV_NAME " is coming up\n");
6086 set_bit(STATUS_EXIT_PENDING, &priv->status);
6087 __iwl3945_down(priv);
6089 /* tried to restart and config the device for as long as our
6090 * patience could withstand */
6091 IWL_ERROR("Unable to initialize device after %d attempts.\n", i);
6096 /*****************************************************************************
6098 * Workqueue callbacks
6100 *****************************************************************************/
6102 static void iwl3945_bg_init_alive_start(struct work_struct *data)
6104 struct iwl3945_priv *priv =
6105 container_of(data, struct iwl3945_priv, init_alive_start.work);
6107 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6110 mutex_lock(&priv->mutex);
6111 iwl3945_init_alive_start(priv);
6112 mutex_unlock(&priv->mutex);
6115 static void iwl3945_bg_alive_start(struct work_struct *data)
6117 struct iwl3945_priv *priv =
6118 container_of(data, struct iwl3945_priv, alive_start.work);
6120 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6123 mutex_lock(&priv->mutex);
6124 iwl3945_alive_start(priv);
6125 mutex_unlock(&priv->mutex);
6128 static void iwl3945_bg_rf_kill(struct work_struct *work)
6130 struct iwl3945_priv *priv = container_of(work, struct iwl3945_priv, rf_kill);
6132 wake_up_interruptible(&priv->wait_command_queue);
6134 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6137 mutex_lock(&priv->mutex);
6139 if (!iwl3945_is_rfkill(priv)) {
6140 IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL,
6141 "HW and/or SW RF Kill no longer active, restarting "
6143 if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
6144 queue_work(priv->workqueue, &priv->restart);
6147 if (!test_bit(STATUS_RF_KILL_HW, &priv->status))
6148 IWL_DEBUG_RF_KILL("Can not turn radio back on - "
6149 "disabled by SW switch\n");
6151 IWL_WARNING("Radio Frequency Kill Switch is On:\n"
6152 "Kill switch must be turned off for "
6153 "wireless networking to work.\n");
6155 mutex_unlock(&priv->mutex);
6158 #define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
6160 static void iwl3945_bg_scan_check(struct work_struct *data)
6162 struct iwl3945_priv *priv =
6163 container_of(data, struct iwl3945_priv, scan_check.work);
6165 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6168 mutex_lock(&priv->mutex);
6169 if (test_bit(STATUS_SCANNING, &priv->status) ||
6170 test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
6171 IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN,
6172 "Scan completion watchdog resetting adapter (%dms)\n",
6173 jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
6175 if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
6176 iwl3945_send_scan_abort(priv);
6178 mutex_unlock(&priv->mutex);
6181 static void iwl3945_bg_request_scan(struct work_struct *data)
6183 struct iwl3945_priv *priv =
6184 container_of(data, struct iwl3945_priv, request_scan);
6185 struct iwl3945_host_cmd cmd = {
6186 .id = REPLY_SCAN_CMD,
6187 .len = sizeof(struct iwl3945_scan_cmd),
6188 .meta.flags = CMD_SIZE_HUGE,
6191 struct iwl3945_scan_cmd *scan;
6192 struct ieee80211_conf *conf = NULL;
6194 enum ieee80211_band band;
6196 conf = ieee80211_get_hw_conf(priv->hw);
6198 mutex_lock(&priv->mutex);
6200 if (!iwl3945_is_ready(priv)) {
6201 IWL_WARNING("request scan called when driver not ready.\n");
6205 /* Make sure the scan wasn't cancelled before this queued work
6206 * was given the chance to run... */
6207 if (!test_bit(STATUS_SCANNING, &priv->status))
6210 /* This should never be called or scheduled if there is currently
6211 * a scan active in the hardware. */
6212 if (test_bit(STATUS_SCAN_HW, &priv->status)) {
6213 IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. "
6214 "Ignoring second request.\n");
6219 if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
6220 IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n");
6224 if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
6225 IWL_DEBUG_HC("Scan request while abort pending. Queuing.\n");
6229 if (iwl3945_is_rfkill(priv)) {
6230 IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n");
6234 if (!test_bit(STATUS_READY, &priv->status)) {
6235 IWL_DEBUG_HC("Scan request while uninitialized. Queuing.\n");
6239 if (!priv->scan_bands) {
6240 IWL_DEBUG_HC("Aborting scan due to no requested bands\n");
6245 priv->scan = kmalloc(sizeof(struct iwl3945_scan_cmd) +
6246 IWL_MAX_SCAN_SIZE, GFP_KERNEL);
6253 memset(scan, 0, sizeof(struct iwl3945_scan_cmd) + IWL_MAX_SCAN_SIZE);
6255 scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
6256 scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
6258 if (iwl3945_is_associated(priv)) {
6261 u32 suspend_time = 100;
6262 u32 scan_suspend_time = 100;
6263 unsigned long flags;
6265 IWL_DEBUG_INFO("Scanning while associated...\n");
6267 spin_lock_irqsave(&priv->lock, flags);
6268 interval = priv->beacon_int;
6269 spin_unlock_irqrestore(&priv->lock, flags);
6271 scan->suspend_time = 0;
6272 scan->max_out_time = cpu_to_le32(200 * 1024);
6274 interval = suspend_time;
6276 * suspend time format:
6277 * 0-19: beacon interval in usec (time before exec.)
6279 * 24-31: number of beacons (suspend between channels)
6282 extra = (suspend_time / interval) << 24;
6283 scan_suspend_time = 0xFF0FFFFF &
6284 (extra | ((suspend_time % interval) * 1024));
6286 scan->suspend_time = cpu_to_le32(scan_suspend_time);
6287 IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n",
6288 scan_suspend_time, interval);
6291 /* We should add the ability for user to lock to PASSIVE ONLY */
6292 if (priv->one_direct_scan) {
6294 ("Kicking off one direct scan for '%s'\n",
6295 iwl3945_escape_essid(priv->direct_ssid,
6296 priv->direct_ssid_len));
6297 scan->direct_scan[0].id = WLAN_EID_SSID;
6298 scan->direct_scan[0].len = priv->direct_ssid_len;
6299 memcpy(scan->direct_scan[0].ssid,
6300 priv->direct_ssid, priv->direct_ssid_len);
6302 } else if (!iwl3945_is_associated(priv) && priv->essid_len) {
6304 ("Kicking off one direct scan for '%s' when not associated\n",
6305 iwl3945_escape_essid(priv->essid, priv->essid_len));
6306 scan->direct_scan[0].id = WLAN_EID_SSID;
6307 scan->direct_scan[0].len = priv->essid_len;
6308 memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
6311 IWL_DEBUG_SCAN("Kicking off one indirect scan.\n");
6315 /* We don't build a direct scan probe request; the uCode will do
6316 * that based on the direct_mask added to each channel entry */
6317 scan->tx_cmd.len = cpu_to_le16(
6318 iwl3945_fill_probe_req(priv, (struct ieee80211_mgmt *)scan->data,
6319 IWL_MAX_SCAN_SIZE - sizeof(*scan), 0));
6320 scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
6321 scan->tx_cmd.sta_id = priv->hw_setting.bcast_sta_id;
6322 scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
6324 /* flags + rate selection */
6326 if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
6327 scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
6328 scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
6329 scan->good_CRC_th = 0;
6330 band = IEEE80211_BAND_2GHZ;
6331 } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
6332 scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
6333 scan->good_CRC_th = IWL_GOOD_CRC_TH;
6334 band = IEEE80211_BAND_5GHZ;
6336 IWL_WARNING("Invalid scan band count\n");
6340 /* select Rx antennas */
6341 scan->flags |= iwl3945_get_antenna_flags(priv);
6343 if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR)
6344 scan->filter_flags = RXON_FILTER_PROMISC_MSK;
6347 scan->channel_count =
6348 iwl3945_get_channels_for_scan(
6349 priv, band, 1, /* active */
6351 (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
6353 scan->channel_count =
6354 iwl3945_get_channels_for_scan(
6355 priv, band, 0, /* passive */
6357 (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
6359 cmd.len += le16_to_cpu(scan->tx_cmd.len) +
6360 scan->channel_count * sizeof(struct iwl3945_scan_channel);
6362 scan->len = cpu_to_le16(cmd.len);
6364 set_bit(STATUS_SCAN_HW, &priv->status);
6365 rc = iwl3945_send_cmd_sync(priv, &cmd);
6369 queue_delayed_work(priv->workqueue, &priv->scan_check,
6370 IWL_SCAN_CHECK_WATCHDOG);
6372 mutex_unlock(&priv->mutex);
6376 /* inform mac80211 scan aborted */
6377 queue_work(priv->workqueue, &priv->scan_completed);
6378 mutex_unlock(&priv->mutex);
6381 static void iwl3945_bg_up(struct work_struct *data)
6383 struct iwl3945_priv *priv = container_of(data, struct iwl3945_priv, up);
6385 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6388 mutex_lock(&priv->mutex);
6390 mutex_unlock(&priv->mutex);
6393 static void iwl3945_bg_restart(struct work_struct *data)
6395 struct iwl3945_priv *priv = container_of(data, struct iwl3945_priv, restart);
6397 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6401 queue_work(priv->workqueue, &priv->up);
6404 static void iwl3945_bg_rx_replenish(struct work_struct *data)
6406 struct iwl3945_priv *priv =
6407 container_of(data, struct iwl3945_priv, rx_replenish);
6409 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6412 mutex_lock(&priv->mutex);
6413 iwl3945_rx_replenish(priv);
6414 mutex_unlock(&priv->mutex);
6417 #define IWL_DELAY_NEXT_SCAN (HZ*2)
6419 static void iwl3945_bg_post_associate(struct work_struct *data)
6421 struct iwl3945_priv *priv = container_of(data, struct iwl3945_priv,
6422 post_associate.work);
6425 struct ieee80211_conf *conf = NULL;
6426 DECLARE_MAC_BUF(mac);
6428 if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
6429 IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__);
6434 IWL_DEBUG_ASSOC("Associated as %d to: %s\n",
6436 print_mac(mac, priv->active_rxon.bssid_addr));
6438 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6441 mutex_lock(&priv->mutex);
6443 if (!priv->vif || !priv->is_open) {
6444 mutex_unlock(&priv->mutex);
6447 iwl3945_scan_cancel_timeout(priv, 200);
6449 conf = ieee80211_get_hw_conf(priv->hw);
6451 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
6452 iwl3945_commit_rxon(priv);
6454 memset(&priv->rxon_timing, 0, sizeof(struct iwl3945_rxon_time_cmd));
6455 iwl3945_setup_rxon_timing(priv);
6456 rc = iwl3945_send_cmd_pdu(priv, REPLY_RXON_TIMING,
6457 sizeof(priv->rxon_timing), &priv->rxon_timing);
6459 IWL_WARNING("REPLY_RXON_TIMING failed - "
6460 "Attempting to continue.\n");
6462 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
6464 priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
6466 IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n",
6467 priv->assoc_id, priv->beacon_int);
6469 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
6470 priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
6472 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
6474 if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
6475 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
6476 priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
6478 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
6480 if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
6481 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
6485 iwl3945_commit_rxon(priv);
6487 switch (priv->iw_mode) {
6488 case IEEE80211_IF_TYPE_STA:
6489 iwl3945_rate_scale_init(priv->hw, IWL_AP_ID);
6492 case IEEE80211_IF_TYPE_IBSS:
6494 /* clear out the station table */
6495 iwl3945_clear_stations_table(priv);
6497 iwl3945_add_station(priv, iwl3945_broadcast_addr, 0, 0);
6498 iwl3945_add_station(priv, priv->bssid, 0, 0);
6499 iwl3945_sync_sta(priv, IWL_STA_ID,
6500 (priv->band == IEEE80211_BAND_5GHZ) ?
6501 IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP,
6503 iwl3945_rate_scale_init(priv->hw, IWL_STA_ID);
6504 iwl3945_send_beacon_cmd(priv);
6509 IWL_ERROR("%s Should not be called in %d mode\n",
6510 __FUNCTION__, priv->iw_mode);
6514 iwl3945_sequence_reset(priv);
6516 iwl3945_activate_qos(priv, 0);
6518 /* we have just associated, don't start scan too early */
6519 priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN;
6520 mutex_unlock(&priv->mutex);
6523 static void iwl3945_bg_abort_scan(struct work_struct *work)
6525 struct iwl3945_priv *priv = container_of(work, struct iwl3945_priv, abort_scan);
6527 if (!iwl3945_is_ready(priv))
6530 mutex_lock(&priv->mutex);
6532 set_bit(STATUS_SCAN_ABORTING, &priv->status);
6533 iwl3945_send_scan_abort(priv);
6535 mutex_unlock(&priv->mutex);
6538 static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
6540 static void iwl3945_bg_scan_completed(struct work_struct *work)
6542 struct iwl3945_priv *priv =
6543 container_of(work, struct iwl3945_priv, scan_completed);
6545 IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN, "SCAN complete scan\n");
6547 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6550 if (test_bit(STATUS_CONF_PENDING, &priv->status))
6551 iwl3945_mac_config(priv->hw, ieee80211_get_hw_conf(priv->hw));
6553 ieee80211_scan_completed(priv->hw);
6555 /* Since setting the TXPOWER may have been deferred while
6556 * performing the scan, fire one off */
6557 mutex_lock(&priv->mutex);
6558 iwl3945_hw_reg_send_txpower(priv);
6559 mutex_unlock(&priv->mutex);
6562 /*****************************************************************************
6564 * mac80211 entry point functions
6566 *****************************************************************************/
6568 #define UCODE_READY_TIMEOUT (2 * HZ)
6570 static int iwl3945_mac_start(struct ieee80211_hw *hw)
6572 struct iwl3945_priv *priv = hw->priv;
6575 IWL_DEBUG_MAC80211("enter\n");
6577 if (pci_enable_device(priv->pci_dev)) {
6578 IWL_ERROR("Fail to pci_enable_device\n");
6581 pci_restore_state(priv->pci_dev);
6582 pci_enable_msi(priv->pci_dev);
6584 ret = request_irq(priv->pci_dev->irq, iwl3945_isr, IRQF_SHARED,
6587 IWL_ERROR("Error allocating IRQ %d\n", priv->pci_dev->irq);
6588 goto out_disable_msi;
6591 /* we should be verifying the device is ready to be opened */
6592 mutex_lock(&priv->mutex);
6594 memset(&priv->staging_rxon, 0, sizeof(struct iwl3945_rxon_cmd));
6595 /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
6596 * ucode filename and max sizes are card-specific. */
6598 if (!priv->ucode_code.len) {
6599 ret = iwl3945_read_ucode(priv);
6601 IWL_ERROR("Could not read microcode: %d\n", ret);
6602 mutex_unlock(&priv->mutex);
6603 goto out_release_irq;
6607 ret = __iwl3945_up(priv);
6609 mutex_unlock(&priv->mutex);
6612 goto out_release_irq;
6614 IWL_DEBUG_INFO("Start UP work.\n");
6616 if (test_bit(STATUS_IN_SUSPEND, &priv->status))
6619 /* Wait for START_ALIVE from ucode. Otherwise callbacks from
6620 * mac80211 will not be run successfully. */
6621 ret = wait_event_interruptible_timeout(priv->wait_command_queue,
6622 test_bit(STATUS_READY, &priv->status),
6623 UCODE_READY_TIMEOUT);
6625 if (!test_bit(STATUS_READY, &priv->status)) {
6626 IWL_ERROR("Wait for START_ALIVE timeout after %dms.\n",
6627 jiffies_to_msecs(UCODE_READY_TIMEOUT));
6629 goto out_release_irq;
6634 IWL_DEBUG_MAC80211("leave\n");
6638 free_irq(priv->pci_dev->irq, priv);
6640 pci_disable_msi(priv->pci_dev);
6641 pci_disable_device(priv->pci_dev);
6643 IWL_DEBUG_MAC80211("leave - failed\n");
6647 static void iwl3945_mac_stop(struct ieee80211_hw *hw)
6649 struct iwl3945_priv *priv = hw->priv;
6651 IWL_DEBUG_MAC80211("enter\n");
6653 if (!priv->is_open) {
6654 IWL_DEBUG_MAC80211("leave - skip\n");
6660 if (iwl3945_is_ready_rf(priv)) {
6661 /* stop mac, cancel any scan request and clear
6662 * RXON_FILTER_ASSOC_MSK BIT
6664 mutex_lock(&priv->mutex);
6665 iwl3945_scan_cancel_timeout(priv, 100);
6666 cancel_delayed_work(&priv->post_associate);
6667 mutex_unlock(&priv->mutex);
6672 flush_workqueue(priv->workqueue);
6673 free_irq(priv->pci_dev->irq, priv);
6674 pci_disable_msi(priv->pci_dev);
6675 pci_save_state(priv->pci_dev);
6676 pci_disable_device(priv->pci_dev);
6678 IWL_DEBUG_MAC80211("leave\n");
6681 static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
6682 struct ieee80211_tx_control *ctl)
6684 struct iwl3945_priv *priv = hw->priv;
6686 IWL_DEBUG_MAC80211("enter\n");
6688 if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
6689 IWL_DEBUG_MAC80211("leave - monitor\n");
6690 dev_kfree_skb_any(skb);
6694 IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
6695 ctl->tx_rate->bitrate);
6697 if (iwl3945_tx_skb(priv, skb, ctl))
6698 dev_kfree_skb_any(skb);
6700 IWL_DEBUG_MAC80211("leave\n");
6704 static int iwl3945_mac_add_interface(struct ieee80211_hw *hw,
6705 struct ieee80211_if_init_conf *conf)
6707 struct iwl3945_priv *priv = hw->priv;
6708 unsigned long flags;
6709 DECLARE_MAC_BUF(mac);
6711 IWL_DEBUG_MAC80211("enter: type %d\n", conf->type);
6714 IWL_DEBUG_MAC80211("leave - vif != NULL\n");
6718 spin_lock_irqsave(&priv->lock, flags);
6719 priv->vif = conf->vif;
6721 spin_unlock_irqrestore(&priv->lock, flags);
6723 mutex_lock(&priv->mutex);
6725 if (conf->mac_addr) {
6726 IWL_DEBUG_MAC80211("Set: %s\n", print_mac(mac, conf->mac_addr));
6727 memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
6730 if (iwl3945_is_ready(priv))
6731 iwl3945_set_mode(priv, conf->type);
6733 mutex_unlock(&priv->mutex);
6735 IWL_DEBUG_MAC80211("leave\n");
6740 * iwl3945_mac_config - mac80211 config callback
6742 * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
6743 * be set inappropriately and the driver currently sets the hardware up to
6744 * use it whenever needed.
6746 static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
6748 struct iwl3945_priv *priv = hw->priv;
6749 const struct iwl3945_channel_info *ch_info;
6750 unsigned long flags;
6753 mutex_lock(&priv->mutex);
6754 IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value);
6756 priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
6758 if (!iwl3945_is_ready(priv)) {
6759 IWL_DEBUG_MAC80211("leave - not ready\n");
6764 if (unlikely(!iwl3945_param_disable_hw_scan &&
6765 test_bit(STATUS_SCANNING, &priv->status))) {
6766 IWL_DEBUG_MAC80211("leave - scanning\n");
6767 set_bit(STATUS_CONF_PENDING, &priv->status);
6768 mutex_unlock(&priv->mutex);
6772 spin_lock_irqsave(&priv->lock, flags);
6774 ch_info = iwl3945_get_channel_info(priv, conf->channel->band,
6775 conf->channel->hw_value);
6776 if (!is_channel_valid(ch_info)) {
6777 IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this band.\n",
6778 conf->channel->hw_value, conf->channel->band);
6779 IWL_DEBUG_MAC80211("leave - invalid channel\n");
6780 spin_unlock_irqrestore(&priv->lock, flags);
6785 iwl3945_set_rxon_channel(priv, conf->channel->band, conf->channel->hw_value);
6787 iwl3945_set_flags_for_phymode(priv, conf->channel->band);
6789 /* The list of supported rates and rate mask can be different
6790 * for each phymode; since the phymode may have changed, reset
6791 * the rate mask to what mac80211 lists */
6792 iwl3945_set_rate(priv);
6794 spin_unlock_irqrestore(&priv->lock, flags);
6796 #ifdef IEEE80211_CONF_CHANNEL_SWITCH
6797 if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) {
6798 iwl3945_hw_channel_switch(priv, conf->channel);
6803 iwl3945_radio_kill_sw(priv, !conf->radio_enabled);
6805 if (!conf->radio_enabled) {
6806 IWL_DEBUG_MAC80211("leave - radio disabled\n");
6810 if (iwl3945_is_rfkill(priv)) {
6811 IWL_DEBUG_MAC80211("leave - RF kill\n");
6816 iwl3945_set_rate(priv);
6818 if (memcmp(&priv->active_rxon,
6819 &priv->staging_rxon, sizeof(priv->staging_rxon)))
6820 iwl3945_commit_rxon(priv);
6822 IWL_DEBUG_INFO("No re-sending same RXON configuration.\n");
6824 IWL_DEBUG_MAC80211("leave\n");
6827 clear_bit(STATUS_CONF_PENDING, &priv->status);
6828 mutex_unlock(&priv->mutex);
6832 static void iwl3945_config_ap(struct iwl3945_priv *priv)
6836 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6839 /* The following should be done only at AP bring up */
6840 if ((priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) == 0) {
6842 /* RXON - unassoc (to set timing command) */
6843 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
6844 iwl3945_commit_rxon(priv);
6847 memset(&priv->rxon_timing, 0, sizeof(struct iwl3945_rxon_time_cmd));
6848 iwl3945_setup_rxon_timing(priv);
6849 rc = iwl3945_send_cmd_pdu(priv, REPLY_RXON_TIMING,
6850 sizeof(priv->rxon_timing), &priv->rxon_timing);
6852 IWL_WARNING("REPLY_RXON_TIMING failed - "
6853 "Attempting to continue.\n");
6855 /* FIXME: what should be the assoc_id for AP? */
6856 priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
6857 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
6858 priv->staging_rxon.flags |=
6859 RXON_FLG_SHORT_PREAMBLE_MSK;
6861 priv->staging_rxon.flags &=
6862 ~RXON_FLG_SHORT_PREAMBLE_MSK;
6864 if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
6865 if (priv->assoc_capability &
6866 WLAN_CAPABILITY_SHORT_SLOT_TIME)
6867 priv->staging_rxon.flags |=
6868 RXON_FLG_SHORT_SLOT_MSK;
6870 priv->staging_rxon.flags &=
6871 ~RXON_FLG_SHORT_SLOT_MSK;
6873 if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
6874 priv->staging_rxon.flags &=
6875 ~RXON_FLG_SHORT_SLOT_MSK;
6877 /* restore RXON assoc */
6878 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
6879 iwl3945_commit_rxon(priv);
6880 iwl3945_add_station(priv, iwl3945_broadcast_addr, 0, 0);
6882 iwl3945_send_beacon_cmd(priv);
6884 /* FIXME - we need to add code here to detect a totally new
6885 * configuration, reset the AP, unassoc, rxon timing, assoc,
6886 * clear sta table, add BCAST sta... */
6889 static int iwl3945_mac_config_interface(struct ieee80211_hw *hw,
6890 struct ieee80211_vif *vif,
6891 struct ieee80211_if_conf *conf)
6893 struct iwl3945_priv *priv = hw->priv;
6894 DECLARE_MAC_BUF(mac);
6895 unsigned long flags;
6901 if (priv->vif != vif) {
6902 IWL_DEBUG_MAC80211("leave - priv->vif != vif\n");
6906 /* XXX: this MUST use conf->mac_addr */
6908 if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) &&
6909 (!conf->beacon || !conf->ssid_len)) {
6911 ("Leaving in AP mode because HostAPD is not ready.\n");
6915 if (!iwl3945_is_alive(priv))
6918 mutex_lock(&priv->mutex);
6921 IWL_DEBUG_MAC80211("bssid: %s\n",
6922 print_mac(mac, conf->bssid));
6925 * very dubious code was here; the probe filtering flag is never set:
6927 if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) &&
6928 !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) {
6931 if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
6933 conf->bssid = priv->mac_addr;
6934 memcpy(priv->bssid, priv->mac_addr, ETH_ALEN);
6935 IWL_DEBUG_MAC80211("bssid was set to: %s\n",
6936 print_mac(mac, conf->bssid));
6938 if (priv->ibss_beacon)
6939 dev_kfree_skb(priv->ibss_beacon);
6941 priv->ibss_beacon = conf->beacon;
6944 if (iwl3945_is_rfkill(priv))
6947 if (conf->bssid && !is_zero_ether_addr(conf->bssid) &&
6948 !is_multicast_ether_addr(conf->bssid)) {
6949 /* If there is currently a HW scan going on in the background
6950 * then we need to cancel it else the RXON below will fail. */
6951 if (iwl3945_scan_cancel_timeout(priv, 100)) {
6952 IWL_WARNING("Aborted scan still in progress "
6954 IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
6955 mutex_unlock(&priv->mutex);
6958 memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN);
6960 /* TODO: Audit driver for usage of these members and see
6961 * if mac80211 deprecates them (priv->bssid looks like it
6962 * shouldn't be there, but I haven't scanned the IBSS code
6963 * to verify) - jpk */
6964 memcpy(priv->bssid, conf->bssid, ETH_ALEN);
6966 if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
6967 iwl3945_config_ap(priv);
6969 rc = iwl3945_commit_rxon(priv);
6970 if ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && rc)
6971 iwl3945_add_station(priv,
6972 priv->active_rxon.bssid_addr, 1, 0);
6976 iwl3945_scan_cancel_timeout(priv, 100);
6977 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
6978 iwl3945_commit_rxon(priv);
6982 spin_lock_irqsave(&priv->lock, flags);
6983 if (!conf->ssid_len)
6984 memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
6986 memcpy(priv->essid, conf->ssid, conf->ssid_len);
6988 priv->essid_len = conf->ssid_len;
6989 spin_unlock_irqrestore(&priv->lock, flags);
6991 IWL_DEBUG_MAC80211("leave\n");
6992 mutex_unlock(&priv->mutex);
6997 static void iwl3945_configure_filter(struct ieee80211_hw *hw,
6998 unsigned int changed_flags,
6999 unsigned int *total_flags,
7000 int mc_count, struct dev_addr_list *mc_list)
7004 * see also iwl3945_connection_init_rx_config
7009 static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw,
7010 struct ieee80211_if_init_conf *conf)
7012 struct iwl3945_priv *priv = hw->priv;
7014 IWL_DEBUG_MAC80211("enter\n");
7016 mutex_lock(&priv->mutex);
7018 if (iwl3945_is_ready_rf(priv)) {
7019 iwl3945_scan_cancel_timeout(priv, 100);
7020 cancel_delayed_work(&priv->post_associate);
7021 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
7022 iwl3945_commit_rxon(priv);
7024 if (priv->vif == conf->vif) {
7026 memset(priv->bssid, 0, ETH_ALEN);
7027 memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
7028 priv->essid_len = 0;
7030 mutex_unlock(&priv->mutex);
7032 IWL_DEBUG_MAC80211("leave\n");
7035 static int iwl3945_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
7038 unsigned long flags;
7039 struct iwl3945_priv *priv = hw->priv;
7041 IWL_DEBUG_MAC80211("enter\n");
7043 mutex_lock(&priv->mutex);
7044 spin_lock_irqsave(&priv->lock, flags);
7046 if (!iwl3945_is_ready_rf(priv)) {
7048 IWL_DEBUG_MAC80211("leave - not ready or exit pending\n");
7052 if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { /* APs don't scan */
7054 IWL_ERROR("ERROR: APs don't scan\n");
7058 /* we don't schedule scan within next_scan_jiffies period */
7059 if (priv->next_scan_jiffies &&
7060 time_after(priv->next_scan_jiffies, jiffies)) {
7064 /* if we just finished scan ask for delay */
7065 if (priv->last_scan_jiffies && time_after(priv->last_scan_jiffies +
7066 IWL_DELAY_NEXT_SCAN, jiffies)) {
7071 IWL_DEBUG_SCAN("direct scan for %s [%d]\n ",
7072 iwl3945_escape_essid(ssid, len), (int)len);
7074 priv->one_direct_scan = 1;
7075 priv->direct_ssid_len = (u8)
7076 min((u8) len, (u8) IW_ESSID_MAX_SIZE);
7077 memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len);
7079 priv->one_direct_scan = 0;
7081 rc = iwl3945_scan_initiate(priv);
7083 IWL_DEBUG_MAC80211("leave\n");
7086 spin_unlock_irqrestore(&priv->lock, flags);
7087 mutex_unlock(&priv->mutex);
7092 static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
7093 const u8 *local_addr, const u8 *addr,
7094 struct ieee80211_key_conf *key)
7096 struct iwl3945_priv *priv = hw->priv;
7100 IWL_DEBUG_MAC80211("enter\n");
7102 if (!iwl3945_param_hwcrypto) {
7103 IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n");
7107 if (is_zero_ether_addr(addr))
7108 /* only support pairwise keys */
7111 sta_id = iwl3945_hw_find_station(priv, addr);
7112 if (sta_id == IWL_INVALID_STATION) {
7113 DECLARE_MAC_BUF(mac);
7115 IWL_DEBUG_MAC80211("leave - %s not in station map.\n",
7116 print_mac(mac, addr));
7120 mutex_lock(&priv->mutex);
7122 iwl3945_scan_cancel_timeout(priv, 100);
7126 rc = iwl3945_update_sta_key_info(priv, key, sta_id);
7128 iwl3945_set_rxon_hwcrypto(priv, 1);
7129 iwl3945_commit_rxon(priv);
7130 key->hw_key_idx = sta_id;
7131 IWL_DEBUG_MAC80211("set_key success, using hwcrypto\n");
7132 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
7136 rc = iwl3945_clear_sta_key_info(priv, sta_id);
7138 iwl3945_set_rxon_hwcrypto(priv, 0);
7139 iwl3945_commit_rxon(priv);
7140 IWL_DEBUG_MAC80211("disable hwcrypto key\n");
7147 IWL_DEBUG_MAC80211("leave\n");
7148 mutex_unlock(&priv->mutex);
7153 static int iwl3945_mac_conf_tx(struct ieee80211_hw *hw, int queue,
7154 const struct ieee80211_tx_queue_params *params)
7156 struct iwl3945_priv *priv = hw->priv;
7157 unsigned long flags;
7160 IWL_DEBUG_MAC80211("enter\n");
7162 if (!iwl3945_is_ready_rf(priv)) {
7163 IWL_DEBUG_MAC80211("leave - RF not ready\n");
7167 if (queue >= AC_NUM) {
7168 IWL_DEBUG_MAC80211("leave - queue >= AC_NUM %d\n", queue);
7172 if (!priv->qos_data.qos_enable) {
7173 priv->qos_data.qos_active = 0;
7174 IWL_DEBUG_MAC80211("leave - qos not enabled\n");
7177 q = AC_NUM - 1 - queue;
7179 spin_lock_irqsave(&priv->lock, flags);
7181 priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min);
7182 priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max);
7183 priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
7184 priv->qos_data.def_qos_parm.ac[q].edca_txop =
7185 cpu_to_le16((params->txop * 32));
7187 priv->qos_data.def_qos_parm.ac[q].reserved1 = 0;
7188 priv->qos_data.qos_active = 1;
7190 spin_unlock_irqrestore(&priv->lock, flags);
7192 mutex_lock(&priv->mutex);
7193 if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
7194 iwl3945_activate_qos(priv, 1);
7195 else if (priv->assoc_id && iwl3945_is_associated(priv))
7196 iwl3945_activate_qos(priv, 0);
7198 mutex_unlock(&priv->mutex);
7200 IWL_DEBUG_MAC80211("leave\n");
7204 static int iwl3945_mac_get_tx_stats(struct ieee80211_hw *hw,
7205 struct ieee80211_tx_queue_stats *stats)
7207 struct iwl3945_priv *priv = hw->priv;
7209 struct iwl3945_tx_queue *txq;
7210 struct iwl3945_queue *q;
7211 unsigned long flags;
7213 IWL_DEBUG_MAC80211("enter\n");
7215 if (!iwl3945_is_ready_rf(priv)) {
7216 IWL_DEBUG_MAC80211("leave - RF not ready\n");
7220 spin_lock_irqsave(&priv->lock, flags);
7222 for (i = 0; i < AC_NUM; i++) {
7223 txq = &priv->txq[i];
7225 avail = iwl3945_queue_space(q);
7227 stats->data[i].len = q->n_window - avail;
7228 stats->data[i].limit = q->n_window - q->high_mark;
7229 stats->data[i].count = q->n_window;
7232 spin_unlock_irqrestore(&priv->lock, flags);
7234 IWL_DEBUG_MAC80211("leave\n");
7239 static int iwl3945_mac_get_stats(struct ieee80211_hw *hw,
7240 struct ieee80211_low_level_stats *stats)
7242 IWL_DEBUG_MAC80211("enter\n");
7243 IWL_DEBUG_MAC80211("leave\n");
7248 static u64 iwl3945_mac_get_tsf(struct ieee80211_hw *hw)
7250 IWL_DEBUG_MAC80211("enter\n");
7251 IWL_DEBUG_MAC80211("leave\n");
7256 static void iwl3945_mac_reset_tsf(struct ieee80211_hw *hw)
7258 struct iwl3945_priv *priv = hw->priv;
7259 unsigned long flags;
7261 mutex_lock(&priv->mutex);
7262 IWL_DEBUG_MAC80211("enter\n");
7264 iwl3945_reset_qos(priv);
7266 cancel_delayed_work(&priv->post_associate);
7268 spin_lock_irqsave(&priv->lock, flags);
7270 priv->assoc_capability = 0;
7271 priv->call_post_assoc_from_beacon = 0;
7273 /* new association get rid of ibss beacon skb */
7274 if (priv->ibss_beacon)
7275 dev_kfree_skb(priv->ibss_beacon);
7277 priv->ibss_beacon = NULL;
7279 priv->beacon_int = priv->hw->conf.beacon_int;
7280 priv->timestamp1 = 0;
7281 priv->timestamp0 = 0;
7282 if ((priv->iw_mode == IEEE80211_IF_TYPE_STA))
7283 priv->beacon_int = 0;
7285 spin_unlock_irqrestore(&priv->lock, flags);
7287 if (!iwl3945_is_ready_rf(priv)) {
7288 IWL_DEBUG_MAC80211("leave - not ready\n");
7289 mutex_unlock(&priv->mutex);
7293 /* we are restarting association process
7294 * clear RXON_FILTER_ASSOC_MSK bit
7296 if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
7297 iwl3945_scan_cancel_timeout(priv, 100);
7298 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
7299 iwl3945_commit_rxon(priv);
7302 /* Per mac80211.h: This is only used in IBSS mode... */
7303 if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) {
7305 IWL_DEBUG_MAC80211("leave - not in IBSS\n");
7306 mutex_unlock(&priv->mutex);
7310 iwl3945_set_rate(priv);
7312 mutex_unlock(&priv->mutex);
7314 IWL_DEBUG_MAC80211("leave\n");
7318 static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
7319 struct ieee80211_tx_control *control)
7321 struct iwl3945_priv *priv = hw->priv;
7322 unsigned long flags;
7324 mutex_lock(&priv->mutex);
7325 IWL_DEBUG_MAC80211("enter\n");
7327 if (!iwl3945_is_ready_rf(priv)) {
7328 IWL_DEBUG_MAC80211("leave - RF not ready\n");
7329 mutex_unlock(&priv->mutex);
7333 if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) {
7334 IWL_DEBUG_MAC80211("leave - not IBSS\n");
7335 mutex_unlock(&priv->mutex);
7339 spin_lock_irqsave(&priv->lock, flags);
7341 if (priv->ibss_beacon)
7342 dev_kfree_skb(priv->ibss_beacon);
7344 priv->ibss_beacon = skb;
7348 IWL_DEBUG_MAC80211("leave\n");
7349 spin_unlock_irqrestore(&priv->lock, flags);
7351 iwl3945_reset_qos(priv);
7353 queue_work(priv->workqueue, &priv->post_associate.work);
7355 mutex_unlock(&priv->mutex);
7360 /*****************************************************************************
7364 *****************************************************************************/
7366 #ifdef CONFIG_IWL3945_DEBUG
7369 * The following adds a new attribute to the sysfs representation
7370 * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
7371 * used for controlling the debug level.
7373 * See the level definitions in iwl for details.
7376 static ssize_t show_debug_level(struct device_driver *d, char *buf)
7378 return sprintf(buf, "0x%08X\n", iwl3945_debug_level);
7380 static ssize_t store_debug_level(struct device_driver *d,
7381 const char *buf, size_t count)
7383 char *p = (char *)buf;
7386 val = simple_strtoul(p, &p, 0);
7388 printk(KERN_INFO DRV_NAME
7389 ": %s is not in hex or decimal form.\n", buf);
7391 iwl3945_debug_level = val;
7393 return strnlen(buf, count);
7396 static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO,
7397 show_debug_level, store_debug_level);
7399 #endif /* CONFIG_IWL3945_DEBUG */
7401 static ssize_t show_rf_kill(struct device *d,
7402 struct device_attribute *attr, char *buf)
7405 * 0 - RF kill not enabled
7406 * 1 - SW based RF kill active (sysfs)
7407 * 2 - HW based RF kill active
7408 * 3 - Both HW and SW based RF kill active
7410 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7411 int val = (test_bit(STATUS_RF_KILL_SW, &priv->status) ? 0x1 : 0x0) |
7412 (test_bit(STATUS_RF_KILL_HW, &priv->status) ? 0x2 : 0x0);
7414 return sprintf(buf, "%i\n", val);
7417 static ssize_t store_rf_kill(struct device *d,
7418 struct device_attribute *attr,
7419 const char *buf, size_t count)
7421 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7423 mutex_lock(&priv->mutex);
7424 iwl3945_radio_kill_sw(priv, buf[0] == '1');
7425 mutex_unlock(&priv->mutex);
7430 static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill);
7432 static ssize_t show_temperature(struct device *d,
7433 struct device_attribute *attr, char *buf)
7435 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7437 if (!iwl3945_is_alive(priv))
7440 return sprintf(buf, "%d\n", iwl3945_hw_get_temperature(priv));
7443 static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
7445 static ssize_t show_rs_window(struct device *d,
7446 struct device_attribute *attr,
7449 struct iwl3945_priv *priv = d->driver_data;
7450 return iwl3945_fill_rs_info(priv->hw, buf, IWL_AP_ID);
7452 static DEVICE_ATTR(rs_window, S_IRUGO, show_rs_window, NULL);
7454 static ssize_t show_tx_power(struct device *d,
7455 struct device_attribute *attr, char *buf)
7457 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7458 return sprintf(buf, "%d\n", priv->user_txpower_limit);
7461 static ssize_t store_tx_power(struct device *d,
7462 struct device_attribute *attr,
7463 const char *buf, size_t count)
7465 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7466 char *p = (char *)buf;
7469 val = simple_strtoul(p, &p, 10);
7471 printk(KERN_INFO DRV_NAME
7472 ": %s is not in decimal form.\n", buf);
7474 iwl3945_hw_reg_set_txpower(priv, val);
7479 static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
7481 static ssize_t show_flags(struct device *d,
7482 struct device_attribute *attr, char *buf)
7484 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7486 return sprintf(buf, "0x%04X\n", priv->active_rxon.flags);
7489 static ssize_t store_flags(struct device *d,
7490 struct device_attribute *attr,
7491 const char *buf, size_t count)
7493 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7494 u32 flags = simple_strtoul(buf, NULL, 0);
7496 mutex_lock(&priv->mutex);
7497 if (le32_to_cpu(priv->staging_rxon.flags) != flags) {
7498 /* Cancel any currently running scans... */
7499 if (iwl3945_scan_cancel_timeout(priv, 100))
7500 IWL_WARNING("Could not cancel scan.\n");
7502 IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n",
7504 priv->staging_rxon.flags = cpu_to_le32(flags);
7505 iwl3945_commit_rxon(priv);
7508 mutex_unlock(&priv->mutex);
7513 static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
7515 static ssize_t show_filter_flags(struct device *d,
7516 struct device_attribute *attr, char *buf)
7518 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7520 return sprintf(buf, "0x%04X\n",
7521 le32_to_cpu(priv->active_rxon.filter_flags));
7524 static ssize_t store_filter_flags(struct device *d,
7525 struct device_attribute *attr,
7526 const char *buf, size_t count)
7528 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7529 u32 filter_flags = simple_strtoul(buf, NULL, 0);
7531 mutex_lock(&priv->mutex);
7532 if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) {
7533 /* Cancel any currently running scans... */
7534 if (iwl3945_scan_cancel_timeout(priv, 100))
7535 IWL_WARNING("Could not cancel scan.\n");
7537 IWL_DEBUG_INFO("Committing rxon.filter_flags = "
7538 "0x%04X\n", filter_flags);
7539 priv->staging_rxon.filter_flags =
7540 cpu_to_le32(filter_flags);
7541 iwl3945_commit_rxon(priv);
7544 mutex_unlock(&priv->mutex);
7549 static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags,
7550 store_filter_flags);
7552 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
7554 static ssize_t show_measurement(struct device *d,
7555 struct device_attribute *attr, char *buf)
7557 struct iwl3945_priv *priv = dev_get_drvdata(d);
7558 struct iwl3945_spectrum_notification measure_report;
7559 u32 size = sizeof(measure_report), len = 0, ofs = 0;
7560 u8 *data = (u8 *) & measure_report;
7561 unsigned long flags;
7563 spin_lock_irqsave(&priv->lock, flags);
7564 if (!(priv->measurement_status & MEASUREMENT_READY)) {
7565 spin_unlock_irqrestore(&priv->lock, flags);
7568 memcpy(&measure_report, &priv->measure_report, size);
7569 priv->measurement_status = 0;
7570 spin_unlock_irqrestore(&priv->lock, flags);
7572 while (size && (PAGE_SIZE - len)) {
7573 hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
7574 PAGE_SIZE - len, 1);
7576 if (PAGE_SIZE - len)
7580 size -= min(size, 16U);
7586 static ssize_t store_measurement(struct device *d,
7587 struct device_attribute *attr,
7588 const char *buf, size_t count)
7590 struct iwl3945_priv *priv = dev_get_drvdata(d);
7591 struct ieee80211_measurement_params params = {
7592 .channel = le16_to_cpu(priv->active_rxon.channel),
7593 .start_time = cpu_to_le64(priv->last_tsf),
7594 .duration = cpu_to_le16(1),
7596 u8 type = IWL_MEASURE_BASIC;
7602 strncpy(buffer, buf, min(sizeof(buffer), count));
7603 channel = simple_strtoul(p, NULL, 0);
7605 params.channel = channel;
7608 while (*p && *p != ' ')
7611 type = simple_strtoul(p + 1, NULL, 0);
7614 IWL_DEBUG_INFO("Invoking measurement of type %d on "
7615 "channel %d (for '%s')\n", type, params.channel, buf);
7616 iwl3945_get_measurement(priv, ¶ms, type);
7621 static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR,
7622 show_measurement, store_measurement);
7623 #endif /* CONFIG_IWL3945_SPECTRUM_MEASUREMENT */
7625 static ssize_t store_retry_rate(struct device *d,
7626 struct device_attribute *attr,
7627 const char *buf, size_t count)
7629 struct iwl3945_priv *priv = dev_get_drvdata(d);
7631 priv->retry_rate = simple_strtoul(buf, NULL, 0);
7632 if (priv->retry_rate <= 0)
7633 priv->retry_rate = 1;
7638 static ssize_t show_retry_rate(struct device *d,
7639 struct device_attribute *attr, char *buf)
7641 struct iwl3945_priv *priv = dev_get_drvdata(d);
7642 return sprintf(buf, "%d", priv->retry_rate);
7645 static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate,
7648 static ssize_t store_power_level(struct device *d,
7649 struct device_attribute *attr,
7650 const char *buf, size_t count)
7652 struct iwl3945_priv *priv = dev_get_drvdata(d);
7656 mode = simple_strtoul(buf, NULL, 0);
7657 mutex_lock(&priv->mutex);
7659 if (!iwl3945_is_ready(priv)) {
7664 if ((mode < 1) || (mode > IWL_POWER_LIMIT) || (mode == IWL_POWER_AC))
7665 mode = IWL_POWER_AC;
7667 mode |= IWL_POWER_ENABLED;
7669 if (mode != priv->power_mode) {
7670 rc = iwl3945_send_power_mode(priv, IWL_POWER_LEVEL(mode));
7672 IWL_DEBUG_MAC80211("failed setting power mode.\n");
7675 priv->power_mode = mode;
7681 mutex_unlock(&priv->mutex);
7685 #define MAX_WX_STRING 80
7687 /* Values are in microsecond */
7688 static const s32 timeout_duration[] = {
7695 static const s32 period_duration[] = {
7703 static ssize_t show_power_level(struct device *d,
7704 struct device_attribute *attr, char *buf)
7706 struct iwl3945_priv *priv = dev_get_drvdata(d);
7707 int level = IWL_POWER_LEVEL(priv->power_mode);
7710 p += sprintf(p, "%d ", level);
7712 case IWL_POWER_MODE_CAM:
7714 p += sprintf(p, "(AC)");
7716 case IWL_POWER_BATTERY:
7717 p += sprintf(p, "(BATTERY)");
7721 "(Timeout %dms, Period %dms)",
7722 timeout_duration[level - 1] / 1000,
7723 period_duration[level - 1] / 1000);
7726 if (!(priv->power_mode & IWL_POWER_ENABLED))
7727 p += sprintf(p, " OFF\n");
7729 p += sprintf(p, " \n");
7731 return (p - buf + 1);
7735 static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level,
7738 static ssize_t show_channels(struct device *d,
7739 struct device_attribute *attr, char *buf)
7741 /* all this shit doesn't belong into sysfs anyway */
7745 static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL);
7747 static ssize_t show_statistics(struct device *d,
7748 struct device_attribute *attr, char *buf)
7750 struct iwl3945_priv *priv = dev_get_drvdata(d);
7751 u32 size = sizeof(struct iwl3945_notif_statistics);
7752 u32 len = 0, ofs = 0;
7753 u8 *data = (u8 *) & priv->statistics;
7756 if (!iwl3945_is_alive(priv))
7759 mutex_lock(&priv->mutex);
7760 rc = iwl3945_send_statistics_request(priv);
7761 mutex_unlock(&priv->mutex);
7765 "Error sending statistics request: 0x%08X\n", rc);
7769 while (size && (PAGE_SIZE - len)) {
7770 hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
7771 PAGE_SIZE - len, 1);
7773 if (PAGE_SIZE - len)
7777 size -= min(size, 16U);
7783 static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL);
7785 static ssize_t show_antenna(struct device *d,
7786 struct device_attribute *attr, char *buf)
7788 struct iwl3945_priv *priv = dev_get_drvdata(d);
7790 if (!iwl3945_is_alive(priv))
7793 return sprintf(buf, "%d\n", priv->antenna);
7796 static ssize_t store_antenna(struct device *d,
7797 struct device_attribute *attr,
7798 const char *buf, size_t count)
7801 struct iwl3945_priv *priv = dev_get_drvdata(d);
7806 if (sscanf(buf, "%1i", &ant) != 1) {
7807 IWL_DEBUG_INFO("not in hex or decimal form.\n");
7811 if ((ant >= 0) && (ant <= 2)) {
7812 IWL_DEBUG_INFO("Setting antenna select to %d.\n", ant);
7813 priv->antenna = (enum iwl3945_antenna)ant;
7815 IWL_DEBUG_INFO("Bad antenna select value %d.\n", ant);
7821 static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna);
7823 static ssize_t show_status(struct device *d,
7824 struct device_attribute *attr, char *buf)
7826 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7827 if (!iwl3945_is_alive(priv))
7829 return sprintf(buf, "0x%08x\n", (int)priv->status);
7832 static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
7834 static ssize_t dump_error_log(struct device *d,
7835 struct device_attribute *attr,
7836 const char *buf, size_t count)
7838 char *p = (char *)buf;
7841 iwl3945_dump_nic_error_log((struct iwl3945_priv *)d->driver_data);
7843 return strnlen(buf, count);
7846 static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log);
7848 static ssize_t dump_event_log(struct device *d,
7849 struct device_attribute *attr,
7850 const char *buf, size_t count)
7852 char *p = (char *)buf;
7855 iwl3945_dump_nic_event_log((struct iwl3945_priv *)d->driver_data);
7857 return strnlen(buf, count);
7860 static DEVICE_ATTR(dump_events, S_IWUSR, NULL, dump_event_log);
7862 /*****************************************************************************
7864 * driver setup and teardown
7866 *****************************************************************************/
7868 static void iwl3945_setup_deferred_work(struct iwl3945_priv *priv)
7870 priv->workqueue = create_workqueue(DRV_NAME);
7872 init_waitqueue_head(&priv->wait_command_queue);
7874 INIT_WORK(&priv->up, iwl3945_bg_up);
7875 INIT_WORK(&priv->restart, iwl3945_bg_restart);
7876 INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish);
7877 INIT_WORK(&priv->scan_completed, iwl3945_bg_scan_completed);
7878 INIT_WORK(&priv->request_scan, iwl3945_bg_request_scan);
7879 INIT_WORK(&priv->abort_scan, iwl3945_bg_abort_scan);
7880 INIT_WORK(&priv->rf_kill, iwl3945_bg_rf_kill);
7881 INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update);
7882 INIT_DELAYED_WORK(&priv->post_associate, iwl3945_bg_post_associate);
7883 INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
7884 INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
7885 INIT_DELAYED_WORK(&priv->scan_check, iwl3945_bg_scan_check);
7887 iwl3945_hw_setup_deferred_work(priv);
7889 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
7890 iwl3945_irq_tasklet, (unsigned long)priv);
7893 static void iwl3945_cancel_deferred_work(struct iwl3945_priv *priv)
7895 iwl3945_hw_cancel_deferred_work(priv);
7897 cancel_delayed_work_sync(&priv->init_alive_start);
7898 cancel_delayed_work(&priv->scan_check);
7899 cancel_delayed_work(&priv->alive_start);
7900 cancel_delayed_work(&priv->post_associate);
7901 cancel_work_sync(&priv->beacon_update);
7904 static struct attribute *iwl3945_sysfs_entries[] = {
7905 &dev_attr_antenna.attr,
7906 &dev_attr_channels.attr,
7907 &dev_attr_dump_errors.attr,
7908 &dev_attr_dump_events.attr,
7909 &dev_attr_flags.attr,
7910 &dev_attr_filter_flags.attr,
7911 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
7912 &dev_attr_measurement.attr,
7914 &dev_attr_power_level.attr,
7915 &dev_attr_retry_rate.attr,
7916 &dev_attr_rf_kill.attr,
7917 &dev_attr_rs_window.attr,
7918 &dev_attr_statistics.attr,
7919 &dev_attr_status.attr,
7920 &dev_attr_temperature.attr,
7921 &dev_attr_tx_power.attr,
7926 static struct attribute_group iwl3945_attribute_group = {
7927 .name = NULL, /* put in device directory */
7928 .attrs = iwl3945_sysfs_entries,
7931 static struct ieee80211_ops iwl3945_hw_ops = {
7932 .tx = iwl3945_mac_tx,
7933 .start = iwl3945_mac_start,
7934 .stop = iwl3945_mac_stop,
7935 .add_interface = iwl3945_mac_add_interface,
7936 .remove_interface = iwl3945_mac_remove_interface,
7937 .config = iwl3945_mac_config,
7938 .config_interface = iwl3945_mac_config_interface,
7939 .configure_filter = iwl3945_configure_filter,
7940 .set_key = iwl3945_mac_set_key,
7941 .get_stats = iwl3945_mac_get_stats,
7942 .get_tx_stats = iwl3945_mac_get_tx_stats,
7943 .conf_tx = iwl3945_mac_conf_tx,
7944 .get_tsf = iwl3945_mac_get_tsf,
7945 .reset_tsf = iwl3945_mac_reset_tsf,
7946 .beacon_update = iwl3945_mac_beacon_update,
7947 .hw_scan = iwl3945_mac_hw_scan
7950 static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
7953 struct iwl3945_priv *priv;
7954 struct ieee80211_hw *hw;
7955 struct iwl_3945_cfg *cfg = (struct iwl_3945_cfg *)(ent->driver_data);
7957 unsigned long flags;
7958 DECLARE_MAC_BUF(mac);
7960 /* Disabling hardware scan means that mac80211 will perform scans
7961 * "the hard way", rather than using device's scan. */
7962 if (iwl3945_param_disable_hw_scan) {
7963 IWL_DEBUG_INFO("Disabling hw_scan\n");
7964 iwl3945_hw_ops.hw_scan = NULL;
7967 if ((iwl3945_param_queues_num > IWL39_MAX_NUM_QUEUES) ||
7968 (iwl3945_param_queues_num < IWL_MIN_NUM_QUEUES)) {
7969 IWL_ERROR("invalid queues_num, should be between %d and %d\n",
7970 IWL_MIN_NUM_QUEUES, IWL39_MAX_NUM_QUEUES);
7975 /* mac80211 allocates memory for this device instance, including
7976 * space for this driver's private structure */
7977 hw = ieee80211_alloc_hw(sizeof(struct iwl3945_priv), &iwl3945_hw_ops);
7979 IWL_ERROR("Can not allocate network device\n");
7983 SET_IEEE80211_DEV(hw, &pdev->dev);
7985 hw->rate_control_algorithm = "iwl-3945-rs";
7987 IWL_DEBUG_INFO("*** LOAD DRIVER ***\n");
7991 priv->pci_dev = pdev;
7994 /* Select antenna (may be helpful if only one antenna is connected) */
7995 priv->antenna = (enum iwl3945_antenna)iwl3945_param_antenna;
7996 #ifdef CONFIG_IWL3945_DEBUG
7997 iwl3945_debug_level = iwl3945_param_debug;
7998 atomic_set(&priv->restrict_refcnt, 0);
8000 priv->retry_rate = 1;
8002 priv->ibss_beacon = NULL;
8004 /* Tell mac80211 and its clients (e.g. Wireless Extensions)
8005 * the range of signal quality values that we'll provide.
8006 * Negative values for level/noise indicate that we'll provide dBm.
8007 * For WE, at least, non-0 values here *enable* display of values
8008 * in app (iwconfig). */
8009 hw->max_rssi = -20; /* signal level, negative indicates dBm */
8010 hw->max_noise = -20; /* noise level, negative indicates dBm */
8011 hw->max_signal = 100; /* link quality indication (%) */
8013 /* Tell mac80211 our Tx characteristics */
8014 hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;
8016 /* 4 EDCA QOS priorities */
8019 spin_lock_init(&priv->lock);
8020 spin_lock_init(&priv->power_data.lock);
8021 spin_lock_init(&priv->sta_lock);
8022 spin_lock_init(&priv->hcmd_lock);
8024 for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++)
8025 INIT_LIST_HEAD(&priv->ibss_mac_hash[i]);
8027 INIT_LIST_HEAD(&priv->free_frames);
8029 mutex_init(&priv->mutex);
8030 if (pci_enable_device(pdev)) {
8032 goto out_ieee80211_free_hw;
8035 pci_set_master(pdev);
8037 /* Clear the driver's (not device's) station table */
8038 iwl3945_clear_stations_table(priv);
8040 priv->data_retry_limit = -1;
8041 priv->ieee_channels = NULL;
8042 priv->ieee_rates = NULL;
8043 priv->band = IEEE80211_BAND_2GHZ;
8045 err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
8047 err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
8049 printk(KERN_WARNING DRV_NAME ": No suitable DMA available.\n");
8050 goto out_pci_disable_device;
8053 pci_set_drvdata(pdev, priv);
8054 err = pci_request_regions(pdev, DRV_NAME);
8056 goto out_pci_disable_device;
8058 /* We disable the RETRY_TIMEOUT register (0x41) to keep
8059 * PCI Tx retries from interfering with C3 CPU state */
8060 pci_write_config_byte(pdev, 0x41, 0x00);
8062 priv->hw_base = pci_iomap(pdev, 0, 0);
8063 if (!priv->hw_base) {
8065 goto out_pci_release_regions;
8068 IWL_DEBUG_INFO("pci_resource_len = 0x%08llx\n",
8069 (unsigned long long) pci_resource_len(pdev, 0));
8070 IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base);
8072 /* Initialize module parameter values here */
8074 /* Disable radio (SW RF KILL) via parameter when loading driver */
8075 if (iwl3945_param_disable) {
8076 set_bit(STATUS_RF_KILL_SW, &priv->status);
8077 IWL_DEBUG_INFO("Radio disabled.\n");
8080 priv->iw_mode = IEEE80211_IF_TYPE_STA;
8082 printk(KERN_INFO DRV_NAME
8083 ": Detected Intel Wireless WiFi Link %s\n", priv->cfg->name);
8085 /* Device-specific setup */
8086 if (iwl3945_hw_set_hw_setting(priv)) {
8087 IWL_ERROR("failed to set hw settings\n");
8091 if (iwl3945_param_qos_enable)
8092 priv->qos_data.qos_enable = 1;
8094 iwl3945_reset_qos(priv);
8096 priv->qos_data.qos_active = 0;
8097 priv->qos_data.qos_cap.val = 0;
8099 iwl3945_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6);
8100 iwl3945_setup_deferred_work(priv);
8101 iwl3945_setup_rx_handlers(priv);
8103 priv->rates_mask = IWL_RATES_MASK;
8104 /* If power management is turned on, default to AC mode */
8105 priv->power_mode = IWL_POWER_AC;
8106 priv->user_txpower_limit = IWL_DEFAULT_TX_POWER;
8108 spin_lock_irqsave(&priv->lock, flags);
8109 iwl3945_disable_interrupts(priv);
8110 spin_unlock_irqrestore(&priv->lock, flags);
8112 err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group);
8114 IWL_ERROR("failed to create sysfs device attributes\n");
8115 goto out_release_irq;
8119 iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS,
8120 CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
8122 iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
8123 err = iwl3945_poll_bit(priv, CSR_GP_CNTRL,
8124 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
8125 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
8127 IWL_DEBUG_INFO("Failed to init the card\n");
8128 goto out_remove_sysfs;
8130 /* Read the EEPROM */
8131 err = iwl3945_eeprom_init(priv);
8133 IWL_ERROR("Unable to init EEPROM\n");
8134 goto out_remove_sysfs;
8136 /* MAC Address location in EEPROM same for 3945/4965 */
8137 get_eeprom_mac(priv, priv->mac_addr);
8138 IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr));
8139 SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
8141 err = iwl3945_init_channel_map(priv);
8143 IWL_ERROR("initializing regulatory failed: %d\n", err);
8144 goto out_remove_sysfs;
8147 err = iwl3945_init_geos(priv);
8149 IWL_ERROR("initializing geos failed: %d\n", err);
8150 goto out_free_channel_map;
8153 err = ieee80211_register_hw(priv->hw);
8155 IWL_ERROR("Failed to register network device (error %d)\n", err);
8159 priv->hw->conf.beacon_int = 100;
8160 priv->mac80211_registered = 1;
8161 pci_save_state(pdev);
8162 pci_disable_device(pdev);
8167 iwl3945_free_geos(priv);
8168 out_free_channel_map:
8169 iwl3945_free_channel_map(priv);
8171 sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
8174 destroy_workqueue(priv->workqueue);
8175 priv->workqueue = NULL;
8176 iwl3945_unset_hw_setting(priv);
8179 pci_iounmap(pdev, priv->hw_base);
8180 out_pci_release_regions:
8181 pci_release_regions(pdev);
8182 out_pci_disable_device:
8183 pci_disable_device(pdev);
8184 pci_set_drvdata(pdev, NULL);
8185 out_ieee80211_free_hw:
8186 ieee80211_free_hw(priv->hw);
8191 static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
8193 struct iwl3945_priv *priv = pci_get_drvdata(pdev);
8194 struct list_head *p, *q;
8196 unsigned long flags;
8201 IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n");
8203 set_bit(STATUS_EXIT_PENDING, &priv->status);
8207 /* make sure we flush any pending irq or
8208 * tasklet for the driver
8210 spin_lock_irqsave(&priv->lock, flags);
8211 iwl3945_disable_interrupts(priv);
8212 spin_unlock_irqrestore(&priv->lock, flags);
8214 iwl_synchronize_irq(priv);
8216 /* Free MAC hash list for ADHOC */
8217 for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) {
8218 list_for_each_safe(p, q, &priv->ibss_mac_hash[i]) {
8220 kfree(list_entry(p, struct iwl3945_ibss_seq, list));
8224 sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
8226 iwl3945_dealloc_ucode_pci(priv);
8229 iwl3945_rx_queue_free(priv, &priv->rxq);
8230 iwl3945_hw_txq_ctx_free(priv);
8232 iwl3945_unset_hw_setting(priv);
8233 iwl3945_clear_stations_table(priv);
8235 if (priv->mac80211_registered) {
8236 ieee80211_unregister_hw(priv->hw);
8239 /*netif_stop_queue(dev); */
8240 flush_workqueue(priv->workqueue);
8242 /* ieee80211_unregister_hw calls iwl3945_mac_stop, which flushes
8243 * priv->workqueue... so we can't take down the workqueue
8245 destroy_workqueue(priv->workqueue);
8246 priv->workqueue = NULL;
8248 pci_iounmap(pdev, priv->hw_base);
8249 pci_release_regions(pdev);
8250 pci_disable_device(pdev);
8251 pci_set_drvdata(pdev, NULL);
8253 iwl3945_free_channel_map(priv);
8254 iwl3945_free_geos(priv);
8256 if (priv->ibss_beacon)
8257 dev_kfree_skb(priv->ibss_beacon);
8259 ieee80211_free_hw(priv->hw);
8264 static int iwl3945_pci_suspend(struct pci_dev *pdev, pm_message_t state)
8266 struct iwl3945_priv *priv = pci_get_drvdata(pdev);
8268 if (priv->is_open) {
8269 set_bit(STATUS_IN_SUSPEND, &priv->status);
8270 iwl3945_mac_stop(priv->hw);
8274 pci_set_power_state(pdev, PCI_D3hot);
8279 static int iwl3945_pci_resume(struct pci_dev *pdev)
8281 struct iwl3945_priv *priv = pci_get_drvdata(pdev);
8283 pci_set_power_state(pdev, PCI_D0);
8286 iwl3945_mac_start(priv->hw);
8288 clear_bit(STATUS_IN_SUSPEND, &priv->status);
8292 #endif /* CONFIG_PM */
8294 /*****************************************************************************
8296 * driver and module entry point
8298 *****************************************************************************/
8300 static struct pci_driver iwl3945_driver = {
8302 .id_table = iwl3945_hw_card_ids,
8303 .probe = iwl3945_pci_probe,
8304 .remove = __devexit_p(iwl3945_pci_remove),
8306 .suspend = iwl3945_pci_suspend,
8307 .resume = iwl3945_pci_resume,
8311 static int __init iwl3945_init(void)
8315 printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
8316 printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
8318 ret = iwl3945_rate_control_register();
8320 IWL_ERROR("Unable to register rate control algorithm: %d\n", ret);
8324 ret = pci_register_driver(&iwl3945_driver);
8326 IWL_ERROR("Unable to initialize PCI module\n");
8327 goto error_register;
8329 #ifdef CONFIG_IWL3945_DEBUG
8330 ret = driver_create_file(&iwl3945_driver.driver, &driver_attr_debug_level);
8332 IWL_ERROR("Unable to create driver sysfs file\n");
8339 #ifdef CONFIG_IWL3945_DEBUG
8341 pci_unregister_driver(&iwl3945_driver);
8344 iwl3945_rate_control_unregister();
8348 static void __exit iwl3945_exit(void)
8350 #ifdef CONFIG_IWL3945_DEBUG
8351 driver_remove_file(&iwl3945_driver.driver, &driver_attr_debug_level);
8353 pci_unregister_driver(&iwl3945_driver);
8354 iwl3945_rate_control_unregister();
8357 module_param_named(antenna, iwl3945_param_antenna, int, 0444);
8358 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
8359 module_param_named(disable, iwl3945_param_disable, int, 0444);
8360 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
8361 module_param_named(hwcrypto, iwl3945_param_hwcrypto, int, 0444);
8362 MODULE_PARM_DESC(hwcrypto,
8363 "using hardware crypto engine (default 0 [software])\n");
8364 module_param_named(debug, iwl3945_param_debug, int, 0444);
8365 MODULE_PARM_DESC(debug, "debug output mask");
8366 module_param_named(disable_hw_scan, iwl3945_param_disable_hw_scan, int, 0444);
8367 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
8369 module_param_named(queues_num, iwl3945_param_queues_num, int, 0444);
8370 MODULE_PARM_DESC(queues_num, "number of hw queues.");
8373 module_param_named(qos_enable, iwl3945_param_qos_enable, int, 0444);
8374 MODULE_PARM_DESC(qos_enable, "enable all QoS functionality");
8376 module_exit(iwl3945_exit);
8377 module_init(iwl3945_init);