Pull battery into release branch
[linux-2.6] / drivers / usb / serial / ti_usb_3410_5052.c
1 /* vi: ts=8 sw=8
2  *
3  * TI 3410/5052 USB Serial Driver
4  *
5  * Copyright (C) 2004 Texas Instruments
6  *
7  * This driver is based on the Linux io_ti driver, which is
8  *   Copyright (C) 2000-2002 Inside Out Networks
9  *   Copyright (C) 2001-2002 Greg Kroah-Hartman
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License as published by
13  * the Free Software Foundation; either version 2 of the License, or
14  * (at your option) any later version.
15  *
16  * For questions or problems with this driver, contact Texas Instruments
17  * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
18  * Peter Berger <pberger@brimson.com>.
19  * 
20  * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
21  * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
22  * configuration.
23  *
24  * #!/bin/bash
25  *
26  * BOOT_CONFIG=1
27  * ACTIVE_CONFIG=2
28  *
29  * if [[ "$ACTION" != "add" ]]
30  * then
31  *      exit
32  * fi
33  *
34  * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue
35  *
36  * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]]
37  * then
38  *      exit
39  * fi
40  *
41  * PRODUCT=${PRODUCT%/?*}               # delete version
42  * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}`
43  * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}`
44  *
45  * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters
46  *
47  * function scan() {
48  *      s=$1
49  *      shift
50  *      for i
51  *      do
52  *              if [[ $s -eq $i ]]
53  *              then
54  *                      return 0
55  *              fi
56  *      done
57  *      return 1
58  * }
59  *
60  * IFS=$IFS,
61  *
62  * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` &&
63  * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) ||
64  * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` &&
65  * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`)
66  * then
67  *      echo $ACTIVE_CONFIG > $CONFIG_PATH
68  * fi
69  */
70
71 #include <linux/kernel.h>
72 #include <linux/errno.h>
73 #include <linux/init.h>
74 #include <linux/slab.h>
75 #include <linux/tty.h>
76 #include <linux/tty_driver.h>
77 #include <linux/tty_flip.h>
78 #include <linux/module.h>
79 #include <linux/spinlock.h>
80 #include <linux/ioctl.h>
81 #include <linux/serial.h>
82 #include <linux/circ_buf.h>
83 #include <asm/uaccess.h>
84 #include <asm/semaphore.h>
85 #include <linux/usb.h>
86 #include <linux/usb/serial.h>
87
88 #include "ti_usb_3410_5052.h"
89 #include "ti_fw_3410.h"         /* firmware image for 3410 */
90 #include "ti_fw_5052.h"         /* firmware image for 5052 */
91
92
93 /* Defines */
94
95 #define TI_DRIVER_VERSION       "v0.9"
96 #define TI_DRIVER_AUTHOR        "Al Borchers <alborchers@steinerpoint.com>"
97 #define TI_DRIVER_DESC          "TI USB 3410/5052 Serial Driver"
98
99 #define TI_FIRMWARE_BUF_SIZE    16284
100
101 #define TI_WRITE_BUF_SIZE       1024
102
103 #define TI_TRANSFER_TIMEOUT     2
104
105 #define TI_DEFAULT_LOW_LATENCY  0
106 #define TI_DEFAULT_CLOSING_WAIT 4000            /* in .01 secs */
107
108 /* supported setserial flags */
109 #define TI_SET_SERIAL_FLAGS     (ASYNC_LOW_LATENCY)
110
111 /* read urb states */
112 #define TI_READ_URB_RUNNING     0
113 #define TI_READ_URB_STOPPING    1
114 #define TI_READ_URB_STOPPED     2
115
116 #define TI_EXTRA_VID_PID_COUNT  5
117
118
119 /* Structures */
120
121 struct ti_port {
122         int                     tp_is_open;
123         __u8                    tp_msr;
124         __u8                    tp_lsr;
125         __u8                    tp_shadow_mcr;
126         __u8                    tp_uart_mode;   /* 232 or 485 modes */
127         unsigned int            tp_uart_base_addr;
128         int                     tp_flags;
129         int                     tp_closing_wait;/* in .01 secs */
130         struct async_icount     tp_icount;
131         wait_queue_head_t       tp_msr_wait;    /* wait for msr change */
132         wait_queue_head_t       tp_write_wait;
133         struct ti_device        *tp_tdev;
134         struct usb_serial_port  *tp_port;
135         spinlock_t              tp_lock;
136         int                     tp_read_urb_state;
137         int                     tp_write_urb_in_use;
138         struct circ_buf         *tp_write_buf;
139 };
140
141 struct ti_device {
142         struct semaphore        td_open_close_sem;
143         int                     td_open_port_count;
144         struct usb_serial       *td_serial;
145         int                     td_is_3410;
146         int                     td_urb_error;
147 };
148
149
150 /* Function Declarations */
151
152 static int ti_startup(struct usb_serial *serial);
153 static void ti_shutdown(struct usb_serial *serial);
154 static int ti_open(struct usb_serial_port *port, struct file *file);
155 static void ti_close(struct usb_serial_port *port, struct file *file);
156 static int ti_write(struct usb_serial_port *port, const unsigned char *data,
157         int count);
158 static int ti_write_room(struct usb_serial_port *port);
159 static int ti_chars_in_buffer(struct usb_serial_port *port);
160 static void ti_throttle(struct usb_serial_port *port);
161 static void ti_unthrottle(struct usb_serial_port *port);
162 static int ti_ioctl(struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg);
163 static void ti_set_termios(struct usb_serial_port *port,
164         struct ktermios *old_termios);
165 static int ti_tiocmget(struct usb_serial_port *port, struct file *file);
166 static int ti_tiocmset(struct usb_serial_port *port, struct file *file,
167         unsigned int set, unsigned int clear);
168 static void ti_break(struct usb_serial_port *port, int break_state);
169 static void ti_interrupt_callback(struct urb *urb);
170 static void ti_bulk_in_callback(struct urb *urb);
171 static void ti_bulk_out_callback(struct urb *urb);
172
173 static void ti_recv(struct device *dev, struct tty_struct *tty,
174         unsigned char *data, int length);
175 static void ti_send(struct ti_port *tport);
176 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr);
177 static int ti_get_lsr(struct ti_port *tport);
178 static int ti_get_serial_info(struct ti_port *tport,
179         struct serial_struct __user *ret_arg);
180 static int ti_set_serial_info(struct ti_port *tport,
181         struct serial_struct __user *new_arg);
182 static void ti_handle_new_msr(struct ti_port *tport, __u8 msr);
183
184 static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush);
185
186 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty);
187 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty);
188
189 static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
190         __u16 moduleid, __u16 value, __u8 *data, int size);
191 static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
192         __u16 moduleid, __u16 value, __u8 *data, int size);
193
194 static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
195         __u8 mask, __u8 byte);
196
197 static int ti_download_firmware(struct ti_device *tdev,
198         unsigned char *firmware, unsigned int firmware_size);
199
200 /* circular buffer */
201 static struct circ_buf *ti_buf_alloc(void);
202 static void ti_buf_free(struct circ_buf *cb);
203 static void ti_buf_clear(struct circ_buf *cb);
204 static int ti_buf_data_avail(struct circ_buf *cb);
205 static int ti_buf_space_avail(struct circ_buf *cb);
206 static int ti_buf_put(struct circ_buf *cb, const char *buf, int count);
207 static int ti_buf_get(struct circ_buf *cb, char *buf, int count);
208
209
210 /* Data */
211
212 /* module parameters */
213 static int debug;
214 static int low_latency = TI_DEFAULT_LOW_LATENCY;
215 static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
216 static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT];
217 static int vendor_3410_count;
218 static ushort product_3410[TI_EXTRA_VID_PID_COUNT];
219 static int product_3410_count;
220 static ushort vendor_5052[TI_EXTRA_VID_PID_COUNT];
221 static int vendor_5052_count;
222 static ushort product_5052[TI_EXTRA_VID_PID_COUNT];
223 static int product_5052_count;
224
225 /* supported devices */
226 /* the array dimension is the number of default entries plus */
227 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
228 /* null entry */
229 static struct usb_device_id ti_id_table_3410[1+TI_EXTRA_VID_PID_COUNT+1] = {
230         { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
231         { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
232 };
233
234 static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
235         { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
236         { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
237         { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
238         { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
239 };
240
241 static struct usb_device_id ti_id_table_combined[] = {
242         { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
243         { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
244         { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
245         { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
246         { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
247         { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
248         { }
249 };
250
251 static struct usb_driver ti_usb_driver = {
252         .name                   = "ti_usb_3410_5052",
253         .probe                  = usb_serial_probe,
254         .disconnect             = usb_serial_disconnect,
255         .id_table               = ti_id_table_combined,
256         .no_dynamic_id =        1,
257 };
258
259 static struct usb_serial_driver ti_1port_device = {
260         .driver = {
261                 .owner          = THIS_MODULE,
262                 .name           = "ti_usb_3410_5052_1",
263         },
264         .description            = "TI USB 3410 1 port adapter",
265         .usb_driver             = &ti_usb_driver,
266         .id_table               = ti_id_table_3410,
267         .num_interrupt_in       = 1,
268         .num_bulk_in            = 1,
269         .num_bulk_out           = 1,
270         .num_ports              = 1,
271         .attach                 = ti_startup,
272         .shutdown               = ti_shutdown,
273         .open                   = ti_open,
274         .close                  = ti_close,
275         .write                  = ti_write,
276         .write_room             = ti_write_room,
277         .chars_in_buffer        = ti_chars_in_buffer,
278         .throttle               = ti_throttle,
279         .unthrottle             = ti_unthrottle,
280         .ioctl                  = ti_ioctl,
281         .set_termios            = ti_set_termios,
282         .tiocmget               = ti_tiocmget,
283         .tiocmset               = ti_tiocmset,
284         .break_ctl              = ti_break,
285         .read_int_callback      = ti_interrupt_callback,
286         .read_bulk_callback     = ti_bulk_in_callback,
287         .write_bulk_callback    = ti_bulk_out_callback,
288 };
289
290 static struct usb_serial_driver ti_2port_device = {
291         .driver = {
292                 .owner          = THIS_MODULE,
293                 .name           = "ti_usb_3410_5052_2",
294         },
295         .description            = "TI USB 5052 2 port adapter",
296         .usb_driver             = &ti_usb_driver,
297         .id_table               = ti_id_table_5052,
298         .num_interrupt_in       = 1,
299         .num_bulk_in            = 2,
300         .num_bulk_out           = 2,
301         .num_ports              = 2,
302         .attach                 = ti_startup,
303         .shutdown               = ti_shutdown,
304         .open                   = ti_open,
305         .close                  = ti_close,
306         .write                  = ti_write,
307         .write_room             = ti_write_room,
308         .chars_in_buffer        = ti_chars_in_buffer,
309         .throttle               = ti_throttle,
310         .unthrottle             = ti_unthrottle,
311         .ioctl                  = ti_ioctl,
312         .set_termios            = ti_set_termios,
313         .tiocmget               = ti_tiocmget,
314         .tiocmset               = ti_tiocmset,
315         .break_ctl              = ti_break,
316         .read_int_callback      = ti_interrupt_callback,
317         .read_bulk_callback     = ti_bulk_in_callback,
318         .write_bulk_callback    = ti_bulk_out_callback,
319 };
320
321
322 /* Module */
323
324 MODULE_AUTHOR(TI_DRIVER_AUTHOR);
325 MODULE_DESCRIPTION(TI_DRIVER_DESC);
326 MODULE_VERSION(TI_DRIVER_VERSION);
327 MODULE_LICENSE("GPL");
328
329 module_param(debug, bool, S_IRUGO | S_IWUSR);
330 MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
331
332 module_param(low_latency, bool, S_IRUGO | S_IWUSR);
333 MODULE_PARM_DESC(low_latency, "TTY low_latency flag, 0=off, 1=on, default is off");
334
335 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
336 MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain in close, in .01 secs, default is 4000");
337
338 module_param_array(vendor_3410, ushort, &vendor_3410_count, S_IRUGO);
339 MODULE_PARM_DESC(vendor_3410, "Vendor ids for 3410 based devices, 1-5 short integers");
340 module_param_array(product_3410, ushort, &product_3410_count, S_IRUGO);
341 MODULE_PARM_DESC(product_3410, "Product ids for 3410 based devices, 1-5 short integers");
342 module_param_array(vendor_5052, ushort, &vendor_5052_count, S_IRUGO);
343 MODULE_PARM_DESC(vendor_5052, "Vendor ids for 5052 based devices, 1-5 short integers");
344 module_param_array(product_5052, ushort, &product_5052_count, S_IRUGO);
345 MODULE_PARM_DESC(product_5052, "Product ids for 5052 based devices, 1-5 short integers");
346
347 MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
348
349
350 /* Functions */
351
352 static int __init ti_init(void)
353 {
354         int i,j;
355         int ret;
356
357         /* insert extra vendor and product ids */
358         j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1;
359         for (i=0; i<min(vendor_3410_count,product_3410_count); i++,j++) {
360                 ti_id_table_3410[j].idVendor = vendor_3410[i];
361                 ti_id_table_3410[j].idProduct = product_3410[i];
362                 ti_id_table_3410[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
363         }
364         j = ARRAY_SIZE(ti_id_table_5052) - TI_EXTRA_VID_PID_COUNT - 1;
365         for (i=0; i<min(vendor_5052_count,product_5052_count); i++,j++) {
366                 ti_id_table_5052[j].idVendor = vendor_5052[i];
367                 ti_id_table_5052[j].idProduct = product_5052[i];
368                 ti_id_table_5052[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
369         }
370
371         ret = usb_serial_register(&ti_1port_device);
372         if (ret)
373                 goto failed_1port;
374         ret = usb_serial_register(&ti_2port_device);
375         if (ret)
376                 goto failed_2port;
377
378         ret = usb_register(&ti_usb_driver);
379         if (ret)
380                 goto failed_usb;
381
382         info(TI_DRIVER_DESC " " TI_DRIVER_VERSION);
383
384         return 0;
385
386 failed_usb:
387         usb_serial_deregister(&ti_2port_device);
388 failed_2port:
389         usb_serial_deregister(&ti_1port_device);
390 failed_1port:
391         return ret;
392 }
393
394
395 static void __exit ti_exit(void)
396 {
397         usb_serial_deregister(&ti_1port_device);
398         usb_serial_deregister(&ti_2port_device);
399         usb_deregister(&ti_usb_driver);
400 }
401
402
403 module_init(ti_init);
404 module_exit(ti_exit);
405
406
407 static int ti_startup(struct usb_serial *serial)
408 {
409         struct ti_device *tdev;
410         struct ti_port *tport;
411         struct usb_device *dev = serial->dev;
412         int status;
413         int i;
414
415
416         dbg("%s - product 0x%4X, num configurations %d, configuration value %d",
417             __FUNCTION__, le16_to_cpu(dev->descriptor.idProduct),
418             dev->descriptor.bNumConfigurations,
419             dev->actconfig->desc.bConfigurationValue);
420
421         /* create device structure */
422         tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL);
423         if (tdev == NULL) {
424                 dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
425                 return -ENOMEM;
426         }
427         sema_init(&tdev->td_open_close_sem, 1);
428         tdev->td_serial = serial;
429         usb_set_serial_data(serial, tdev);
430
431         /* determine device type */
432         if (usb_match_id(serial->interface, ti_id_table_3410))
433                 tdev->td_is_3410 = 1;
434         dbg("%s - device type is %s", __FUNCTION__, tdev->td_is_3410 ? "3410" : "5052");
435
436         /* if we have only 1 configuration, download firmware */
437         if (dev->descriptor.bNumConfigurations == 1) {
438
439                 if (tdev->td_is_3410)
440                         status = ti_download_firmware(tdev, ti_fw_3410,
441                                 sizeof(ti_fw_3410));
442                 else
443                         status = ti_download_firmware(tdev, ti_fw_5052,
444                                 sizeof(ti_fw_5052));
445                 if (status)
446                         goto free_tdev;
447
448                 /* 3410 must be reset, 5052 resets itself */
449                 if (tdev->td_is_3410) {
450                         msleep_interruptible(100);
451                         usb_reset_device(dev);
452                 }
453
454                 status = -ENODEV;
455                 goto free_tdev;
456         } 
457
458         /* the second configuration must be set (in sysfs by hotplug script) */
459         if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
460                 status = -ENODEV;
461                 goto free_tdev;
462         }
463
464         /* set up port structures */
465         for (i = 0; i < serial->num_ports; ++i) {
466                 tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL);
467                 if (tport == NULL) {
468                         dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
469                         status = -ENOMEM;
470                         goto free_tports;
471                 }
472                 spin_lock_init(&tport->tp_lock);
473                 tport->tp_uart_base_addr = (i == 0 ? TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
474                 tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0;
475                 tport->tp_closing_wait = closing_wait;
476                 init_waitqueue_head(&tport->tp_msr_wait);
477                 init_waitqueue_head(&tport->tp_write_wait);
478                 tport->tp_write_buf = ti_buf_alloc();
479                 if (tport->tp_write_buf == NULL) {
480                         dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
481                         kfree(tport);
482                         status = -ENOMEM;
483                         goto free_tports;
484                 }
485                 tport->tp_port = serial->port[i];
486                 tport->tp_tdev = tdev;
487                 usb_set_serial_port_data(serial->port[i], tport);
488                 tport->tp_uart_mode = 0;        /* default is RS232 */
489         }
490         
491         return 0;
492
493 free_tports:
494         for (--i; i>=0; --i) {
495                 tport = usb_get_serial_port_data(serial->port[i]);
496                 ti_buf_free(tport->tp_write_buf);
497                 kfree(tport);
498                 usb_set_serial_port_data(serial->port[i], NULL);
499         }
500 free_tdev:
501         kfree(tdev);
502         usb_set_serial_data(serial, NULL);
503         return status;
504 }
505
506
507 static void ti_shutdown(struct usb_serial *serial)
508 {
509         int i;
510         struct ti_device *tdev = usb_get_serial_data(serial);
511         struct ti_port *tport;
512
513         dbg("%s", __FUNCTION__);
514
515         for (i=0; i < serial->num_ports; ++i) {
516                 tport = usb_get_serial_port_data(serial->port[i]);
517                 if (tport) {
518                         ti_buf_free(tport->tp_write_buf);
519                         kfree(tport);
520                         usb_set_serial_port_data(serial->port[i], NULL);
521                 }
522         }
523
524         kfree(tdev);
525         usb_set_serial_data(serial, NULL);
526 }
527
528
529 static int ti_open(struct usb_serial_port *port, struct file *file)
530 {
531         struct ti_port *tport = usb_get_serial_port_data(port);
532         struct ti_device *tdev;
533         struct usb_device *dev;
534         struct urb *urb;
535         int port_number;
536         int status;
537         __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINOUS | 
538                              TI_PIPE_TIMEOUT_ENABLE | 
539                              (TI_TRANSFER_TIMEOUT << 2));
540
541         dbg("%s - port %d", __FUNCTION__, port->number);
542
543         if (tport == NULL)
544                 return -ENODEV;
545
546         dev = port->serial->dev;
547         tdev = tport->tp_tdev;
548
549         /* only one open on any port on a device at a time */
550         if (down_interruptible(&tdev->td_open_close_sem))
551                 return -ERESTARTSYS;
552
553         if (port->tty)
554                 port->tty->low_latency = 
555                         (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
556
557         port_number = port->number - port->serial->minor;
558
559         memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount));
560
561         tport->tp_msr = 0;
562         tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR);
563
564         /* start interrupt urb the first time a port is opened on this device */
565         if (tdev->td_open_port_count == 0) {
566                 dbg("%s - start interrupt in urb", __FUNCTION__);
567                 urb = tdev->td_serial->port[0]->interrupt_in_urb;
568                 if (!urb) {
569                         dev_err(&port->dev, "%s - no interrupt urb\n", __FUNCTION__);
570                         status = -EINVAL;
571                         goto up_sem;
572                 }
573                 urb->complete = ti_interrupt_callback;
574                 urb->context = tdev;
575                 urb->dev = dev;
576                 status = usb_submit_urb(urb, GFP_KERNEL);
577                 if (status) {
578                         dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __FUNCTION__, status);
579                         goto up_sem;
580                 }
581         }
582
583         ti_set_termios(port, NULL);
584
585         dbg("%s - sending TI_OPEN_PORT", __FUNCTION__);
586         status = ti_command_out_sync(tdev, TI_OPEN_PORT,
587                 (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
588         if (status) {
589                 dev_err(&port->dev, "%s - cannot send open command, %d\n", __FUNCTION__, status);
590                 goto unlink_int_urb;
591         }
592
593         dbg("%s - sending TI_START_PORT", __FUNCTION__);
594         status = ti_command_out_sync(tdev, TI_START_PORT,
595                 (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
596         if (status) {
597                 dev_err(&port->dev, "%s - cannot send start command, %d\n", __FUNCTION__, status);
598                 goto unlink_int_urb;
599         }
600
601         dbg("%s - sending TI_PURGE_PORT", __FUNCTION__);
602         status = ti_command_out_sync(tdev, TI_PURGE_PORT,
603                 (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0);
604         if (status) {
605                 dev_err(&port->dev, "%s - cannot clear input buffers, %d\n", __FUNCTION__, status);
606                 goto unlink_int_urb;
607         }
608         status = ti_command_out_sync(tdev, TI_PURGE_PORT,
609                 (__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0);
610         if (status) {
611                 dev_err(&port->dev, "%s - cannot clear output buffers, %d\n", __FUNCTION__, status);
612                 goto unlink_int_urb;
613         }
614
615         /* reset the data toggle on the bulk endpoints to work around bug in
616          * host controllers where things get out of sync some times */
617         usb_clear_halt(dev, port->write_urb->pipe);
618         usb_clear_halt(dev, port->read_urb->pipe);
619
620         ti_set_termios(port, NULL);
621
622         dbg("%s - sending TI_OPEN_PORT (2)", __FUNCTION__);
623         status = ti_command_out_sync(tdev, TI_OPEN_PORT,
624                 (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
625         if (status) {
626                 dev_err(&port->dev, "%s - cannot send open command (2), %d\n", __FUNCTION__, status);
627                 goto unlink_int_urb;
628         }
629
630         dbg("%s - sending TI_START_PORT (2)", __FUNCTION__);
631         status = ti_command_out_sync(tdev, TI_START_PORT,
632                 (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
633         if (status) {
634                 dev_err(&port->dev, "%s - cannot send start command (2), %d\n", __FUNCTION__, status);
635                 goto unlink_int_urb;
636         }
637
638         /* start read urb */
639         dbg("%s - start read urb", __FUNCTION__);
640         urb = port->read_urb;
641         if (!urb) {
642                 dev_err(&port->dev, "%s - no read urb\n", __FUNCTION__);
643                 status = -EINVAL;
644                 goto unlink_int_urb;
645         }
646         tport->tp_read_urb_state = TI_READ_URB_RUNNING;
647         urb->complete = ti_bulk_in_callback;
648         urb->context = tport;
649         urb->dev = dev;
650         status = usb_submit_urb(urb, GFP_KERNEL);
651         if (status) {
652                 dev_err(&port->dev, "%s - submit read urb failed, %d\n", __FUNCTION__, status);
653                 goto unlink_int_urb;
654         }
655
656         tport->tp_is_open = 1;
657         ++tdev->td_open_port_count;
658
659         goto up_sem;
660
661 unlink_int_urb:
662         if (tdev->td_open_port_count == 0)
663                 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
664 up_sem:
665         up(&tdev->td_open_close_sem);
666         dbg("%s - exit %d", __FUNCTION__, status);
667         return status;
668 }
669
670
671 static void ti_close(struct usb_serial_port *port, struct file *file)
672 {
673         struct ti_device *tdev;
674         struct ti_port *tport;
675         int port_number;
676         int status;
677         int do_up;
678
679         dbg("%s - port %d", __FUNCTION__, port->number);
680                          
681         tdev = usb_get_serial_data(port->serial);
682         tport = usb_get_serial_port_data(port);
683         if (tdev == NULL || tport == NULL)
684                 return;
685
686         tport->tp_is_open = 0;
687
688         ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 1);
689
690         usb_kill_urb(port->read_urb);
691         usb_kill_urb(port->write_urb);
692         tport->tp_write_urb_in_use = 0;
693
694         port_number = port->number - port->serial->minor;
695
696         dbg("%s - sending TI_CLOSE_PORT", __FUNCTION__);
697         status = ti_command_out_sync(tdev, TI_CLOSE_PORT,
698                      (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
699         if (status)
700                 dev_err(&port->dev, "%s - cannot send close port command, %d\n" , __FUNCTION__, status);
701
702         /* if down is interrupted, continue anyway */
703         do_up = !down_interruptible(&tdev->td_open_close_sem);
704         --tport->tp_tdev->td_open_port_count;
705         if (tport->tp_tdev->td_open_port_count <= 0) {
706                 /* last port is closed, shut down interrupt urb */
707                 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
708                 tport->tp_tdev->td_open_port_count = 0;
709         }
710         if (do_up)
711                 up(&tdev->td_open_close_sem);
712
713         dbg("%s - exit", __FUNCTION__);
714 }
715
716
717 static int ti_write(struct usb_serial_port *port, const unsigned char *data,
718         int count)
719 {
720         struct ti_port *tport = usb_get_serial_port_data(port);
721         unsigned long flags;
722
723         dbg("%s - port %d", __FUNCTION__, port->number);
724
725         if (count == 0) {
726                 dbg("%s - write request of 0 bytes", __FUNCTION__);
727                 return 0;
728         }
729
730         if (tport == NULL || !tport->tp_is_open)
731                 return -ENODEV;
732
733         spin_lock_irqsave(&tport->tp_lock, flags);
734         count = ti_buf_put(tport->tp_write_buf, data, count);
735         spin_unlock_irqrestore(&tport->tp_lock, flags);
736
737         ti_send(tport);
738
739         return count;
740 }
741
742
743 static int ti_write_room(struct usb_serial_port *port)
744 {
745         struct ti_port *tport = usb_get_serial_port_data(port);
746         int room = 0;
747         unsigned long flags;
748
749         dbg("%s - port %d", __FUNCTION__, port->number);
750
751         if (tport == NULL)
752                 return -ENODEV;
753         
754         spin_lock_irqsave(&tport->tp_lock, flags);
755         room = ti_buf_space_avail(tport->tp_write_buf);
756         spin_unlock_irqrestore(&tport->tp_lock, flags);
757
758         dbg("%s - returns %d", __FUNCTION__, room);
759         return room;
760 }
761
762
763 static int ti_chars_in_buffer(struct usb_serial_port *port)
764 {
765         struct ti_port *tport = usb_get_serial_port_data(port);
766         int chars = 0;
767         unsigned long flags;
768
769         dbg("%s - port %d", __FUNCTION__, port->number);
770
771         if (tport == NULL)
772                 return -ENODEV;
773
774         spin_lock_irqsave(&tport->tp_lock, flags);
775         chars = ti_buf_data_avail(tport->tp_write_buf);
776         spin_unlock_irqrestore(&tport->tp_lock, flags);
777
778         dbg("%s - returns %d", __FUNCTION__, chars);
779         return chars;
780 }
781
782
783 static void ti_throttle(struct usb_serial_port *port)
784 {
785         struct ti_port *tport = usb_get_serial_port_data(port);
786         struct tty_struct *tty;
787
788         dbg("%s - port %d", __FUNCTION__, port->number);
789
790         if (tport == NULL)
791                 return;
792
793         tty = port->tty;
794         if (!tty) {
795                 dbg("%s - no tty", __FUNCTION__);
796                 return;
797         }
798
799         if (I_IXOFF(tty) || C_CRTSCTS(tty))
800                 ti_stop_read(tport, tty);
801
802 }
803
804
805 static void ti_unthrottle(struct usb_serial_port *port)
806 {
807         struct ti_port *tport = usb_get_serial_port_data(port);
808         struct tty_struct *tty;
809         int status;
810
811         dbg("%s - port %d", __FUNCTION__, port->number);
812
813         if (tport == NULL)
814                 return;
815
816         tty = port->tty;
817         if (!tty) {
818                 dbg("%s - no tty", __FUNCTION__);
819                 return;
820         }
821
822         if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
823                 status = ti_restart_read(tport, tty);
824                 if (status)
825                         dev_err(&port->dev, "%s - cannot restart read, %d\n", __FUNCTION__, status);
826         }
827 }
828
829
830 static int ti_ioctl(struct usb_serial_port *port, struct file *file,
831         unsigned int cmd, unsigned long arg)
832 {
833         struct ti_port *tport = usb_get_serial_port_data(port);
834         struct async_icount cnow;
835         struct async_icount cprev;
836
837         dbg("%s - port %d, cmd = 0x%04X", __FUNCTION__, port->number, cmd);
838
839         if (tport == NULL)
840                 return -ENODEV;
841
842         switch (cmd) {
843                 case TIOCGSERIAL:
844                         dbg("%s - (%d) TIOCGSERIAL", __FUNCTION__, port->number);
845                         return ti_get_serial_info(tport, (struct serial_struct __user *)arg);
846                         break;
847
848                 case TIOCSSERIAL:
849                         dbg("%s - (%d) TIOCSSERIAL", __FUNCTION__, port->number);
850                         return ti_set_serial_info(tport, (struct serial_struct __user *)arg);
851                         break;
852
853                 case TIOCMIWAIT:
854                         dbg("%s - (%d) TIOCMIWAIT", __FUNCTION__, port->number);
855                         cprev = tport->tp_icount;
856                         while (1) {
857                                 interruptible_sleep_on(&tport->tp_msr_wait);
858                                 if (signal_pending(current))
859                                         return -ERESTARTSYS;
860                                 cnow = tport->tp_icount;
861                                 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
862                                     cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
863                                         return -EIO; /* no change => error */
864                                 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
865                                     ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
866                                     ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
867                                     ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
868                                         return 0;
869                                 }
870                                 cprev = cnow;
871                         }
872                         break;
873
874                 case TIOCGICOUNT:
875                         dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, port->number, tport->tp_icount.rx, tport->tp_icount.tx);
876                         if (copy_to_user((void __user *)arg, &tport->tp_icount, sizeof(tport->tp_icount)))
877                                 return -EFAULT;
878                         return 0;
879         }
880
881         return -ENOIOCTLCMD;
882 }
883
884
885 static void ti_set_termios(struct usb_serial_port *port,
886         struct ktermios *old_termios)
887 {
888         struct ti_port *tport = usb_get_serial_port_data(port);
889         struct tty_struct *tty = port->tty;
890         struct ti_uart_config *config;
891         tcflag_t cflag,iflag;
892         int baud;
893         int status;
894         int port_number = port->number - port->serial->minor;
895         unsigned int mcr;
896
897         dbg("%s - port %d", __FUNCTION__, port->number);
898
899         if (!tty || !tty->termios) {
900                 dbg("%s - no tty or termios", __FUNCTION__);
901                 return;
902         }
903
904         cflag = tty->termios->c_cflag;
905         iflag = tty->termios->c_iflag;
906
907         if (old_termios && cflag == old_termios->c_cflag
908         && iflag == old_termios->c_iflag) {
909                 dbg("%s - nothing to change", __FUNCTION__);
910                 return;
911         }
912
913         dbg("%s - clfag %08x, iflag %08x", __FUNCTION__, cflag, iflag);
914
915         if (old_termios)
916                 dbg("%s - old clfag %08x, old iflag %08x", __FUNCTION__, old_termios->c_cflag, old_termios->c_iflag);
917
918         if (tport == NULL)
919                 return;
920
921         config = kmalloc(sizeof(*config), GFP_KERNEL);
922         if (!config) {
923                 dev_err(&port->dev, "%s - out of memory\n", __FUNCTION__);
924                 return;
925         }
926
927         config->wFlags = 0;
928
929         /* these flags must be set */
930         config->wFlags |= TI_UART_ENABLE_MS_INTS;
931         config->wFlags |= TI_UART_ENABLE_AUTO_START_DMA;
932         config->bUartMode = (__u8)(tport->tp_uart_mode);
933
934         switch (cflag & CSIZE) {
935                 case CS5:
936                             config->bDataBits = TI_UART_5_DATA_BITS;
937                             break;
938                 case CS6:
939                             config->bDataBits = TI_UART_6_DATA_BITS;
940                             break;
941                 case CS7:
942                             config->bDataBits = TI_UART_7_DATA_BITS;
943                             break;
944                 default:
945                 case CS8:
946                             config->bDataBits = TI_UART_8_DATA_BITS;
947                             break;
948         }
949
950         if (cflag & PARENB) {
951                 if (cflag & PARODD) {
952                         config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING;
953                         config->bParity = TI_UART_ODD_PARITY;
954                 } else {
955                         config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING;
956                         config->bParity = TI_UART_EVEN_PARITY;
957                 }
958         } else {
959                 config->wFlags &= ~TI_UART_ENABLE_PARITY_CHECKING;
960                 config->bParity = TI_UART_NO_PARITY;    
961         }
962
963         if (cflag & CSTOPB)
964                 config->bStopBits = TI_UART_2_STOP_BITS;
965         else
966                 config->bStopBits = TI_UART_1_STOP_BITS;
967
968         if (cflag & CRTSCTS) {
969                 /* RTS flow control must be off to drop RTS for baud rate B0 */
970                 if ((cflag & CBAUD) != B0)
971                         config->wFlags |= TI_UART_ENABLE_RTS_IN;
972                 config->wFlags |= TI_UART_ENABLE_CTS_OUT;
973         } else {
974                 tty->hw_stopped = 0;
975                 ti_restart_read(tport, tty);
976         }
977
978         if (I_IXOFF(tty) || I_IXON(tty)) {
979                 config->cXon  = START_CHAR(tty);
980                 config->cXoff = STOP_CHAR(tty);
981
982                 if (I_IXOFF(tty))
983                         config->wFlags |= TI_UART_ENABLE_X_IN;
984                 else
985                         ti_restart_read(tport, tty);
986
987                 if (I_IXON(tty))
988                         config->wFlags |= TI_UART_ENABLE_X_OUT;
989         }
990
991         baud = tty_get_baud_rate(tty);
992         if (!baud) baud = 9600;
993         if (tport->tp_tdev->td_is_3410)
994                 config->wBaudRate = (__u16)((923077 + baud/2) / baud);
995         else
996                 config->wBaudRate = (__u16)((461538 + baud/2) / baud);
997
998         dbg("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d",
999         __FUNCTION__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode);
1000
1001         cpu_to_be16s(&config->wBaudRate);
1002         cpu_to_be16s(&config->wFlags);
1003
1004         status = ti_command_out_sync(tport->tp_tdev, TI_SET_CONFIG,
1005                 (__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config,
1006                 sizeof(*config));
1007         if (status)
1008                 dev_err(&port->dev, "%s - cannot set config on port %d, %d\n", __FUNCTION__, port_number, status);
1009
1010         /* SET_CONFIG asserts RTS and DTR, reset them correctly */
1011         mcr = tport->tp_shadow_mcr;
1012         /* if baud rate is B0, clear RTS and DTR */
1013         if ((cflag & CBAUD) == B0)
1014                 mcr &= ~(TI_MCR_DTR | TI_MCR_RTS);
1015         status = ti_set_mcr(tport, mcr);
1016         if (status)
1017                 dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n", __FUNCTION__, port_number, status);
1018
1019         kfree(config);
1020 }
1021
1022
1023 static int ti_tiocmget(struct usb_serial_port *port, struct file *file)
1024 {
1025         struct ti_port *tport = usb_get_serial_port_data(port);
1026         unsigned int result;
1027         unsigned int msr;
1028         unsigned int mcr;
1029
1030         dbg("%s - port %d", __FUNCTION__, port->number);
1031
1032         if (tport == NULL)
1033                 return -ENODEV;
1034
1035         msr = tport->tp_msr;
1036         mcr = tport->tp_shadow_mcr;
1037
1038         result = ((mcr & TI_MCR_DTR) ? TIOCM_DTR : 0)
1039                 | ((mcr & TI_MCR_RTS) ? TIOCM_RTS : 0)
1040                 | ((mcr & TI_MCR_LOOP) ? TIOCM_LOOP : 0)
1041                 | ((msr & TI_MSR_CTS) ? TIOCM_CTS : 0)
1042                 | ((msr & TI_MSR_CD) ? TIOCM_CAR : 0)
1043                 | ((msr & TI_MSR_RI) ? TIOCM_RI : 0)
1044                 | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0);
1045
1046         dbg("%s - 0x%04X", __FUNCTION__, result);
1047
1048         return result;
1049 }
1050
1051
1052 static int ti_tiocmset(struct usb_serial_port *port, struct file *file,
1053         unsigned int set, unsigned int clear)
1054 {
1055         struct ti_port *tport = usb_get_serial_port_data(port);
1056         unsigned int mcr;
1057
1058         dbg("%s - port %d", __FUNCTION__, port->number);
1059
1060         if (tport == NULL)
1061                 return -ENODEV;
1062
1063         mcr = tport->tp_shadow_mcr;
1064
1065         if (set & TIOCM_RTS)
1066                 mcr |= TI_MCR_RTS;
1067         if (set & TIOCM_DTR)
1068                 mcr |= TI_MCR_DTR;
1069         if (set & TIOCM_LOOP)
1070                 mcr |= TI_MCR_LOOP;
1071
1072         if (clear & TIOCM_RTS)
1073                 mcr &= ~TI_MCR_RTS;
1074         if (clear & TIOCM_DTR)
1075                 mcr &= ~TI_MCR_DTR;
1076         if (clear & TIOCM_LOOP)
1077                 mcr &= ~TI_MCR_LOOP;
1078
1079         return ti_set_mcr(tport, mcr);
1080 }
1081
1082
1083 static void ti_break(struct usb_serial_port *port, int break_state)
1084 {
1085         struct ti_port *tport = usb_get_serial_port_data(port);
1086         int status;
1087
1088         dbg("%s - state = %d", __FUNCTION__, break_state);
1089
1090         if (tport == NULL)
1091                 return;
1092
1093         ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 0);
1094
1095         status = ti_write_byte(tport->tp_tdev,
1096                 tport->tp_uart_base_addr + TI_UART_OFFSET_LCR,
1097                 TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
1098
1099         if (status)
1100                 dbg("%s - error setting break, %d", __FUNCTION__, status);
1101 }
1102
1103
1104 static void ti_interrupt_callback(struct urb *urb)
1105 {
1106         struct ti_device *tdev = (struct ti_device *)urb->context;
1107         struct usb_serial_port *port;
1108         struct usb_serial *serial = tdev->td_serial;
1109         struct ti_port *tport;
1110         struct device *dev = &urb->dev->dev;
1111         unsigned char *data = urb->transfer_buffer;
1112         int length = urb->actual_length;
1113         int port_number;
1114         int function;
1115         int status = urb->status;
1116         int retval;
1117         __u8 msr;
1118
1119         dbg("%s", __FUNCTION__);
1120
1121         switch (status) {
1122         case 0:
1123                 break;
1124         case -ECONNRESET:
1125         case -ENOENT:
1126         case -ESHUTDOWN:
1127                 dbg("%s - urb shutting down, %d", __FUNCTION__, status);
1128                 tdev->td_urb_error = 1;
1129                 return;
1130         default:
1131                 dev_err(dev, "%s - nonzero urb status, %d\n",
1132                         __FUNCTION__, status);
1133                 tdev->td_urb_error = 1;
1134                 goto exit;
1135         }
1136
1137         if (length != 2) {
1138                 dbg("%s - bad packet size, %d", __FUNCTION__, length);
1139                 goto exit;
1140         }
1141
1142         if (data[0] == TI_CODE_HARDWARE_ERROR) {
1143                 dev_err(dev, "%s - hardware error, %d\n", __FUNCTION__, data[1]);
1144                 goto exit;
1145         }
1146
1147         port_number = TI_GET_PORT_FROM_CODE(data[0]);
1148         function = TI_GET_FUNC_FROM_CODE(data[0]);
1149
1150         dbg("%s - port_number %d, function %d, data 0x%02X", __FUNCTION__, port_number, function, data[1]);
1151
1152         if (port_number >= serial->num_ports) {
1153                 dev_err(dev, "%s - bad port number, %d\n", __FUNCTION__, port_number);
1154                 goto exit;
1155         }
1156
1157         port = serial->port[port_number];
1158
1159         tport = usb_get_serial_port_data(port);
1160         if (!tport)
1161                 goto exit;
1162
1163         switch (function) {
1164         case TI_CODE_DATA_ERROR:
1165                 dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", __FUNCTION__, port_number, data[1]);
1166                 break;
1167
1168         case TI_CODE_MODEM_STATUS:
1169                 msr = data[1];
1170                 dbg("%s - port %d, msr 0x%02X", __FUNCTION__, port_number, msr);
1171                 ti_handle_new_msr(tport, msr);
1172                 break;
1173
1174         default:
1175                 dev_err(dev, "%s - unknown interrupt code, 0x%02X\n", __FUNCTION__, data[1]);
1176                 break;
1177         }
1178
1179 exit:
1180         retval = usb_submit_urb(urb, GFP_ATOMIC);
1181         if (retval)
1182                 dev_err(dev, "%s - resubmit interrupt urb failed, %d\n",
1183                         __FUNCTION__, retval);
1184 }
1185
1186
1187 static void ti_bulk_in_callback(struct urb *urb)
1188 {
1189         struct ti_port *tport = (struct ti_port *)urb->context;
1190         struct usb_serial_port *port = tport->tp_port;
1191         struct device *dev = &urb->dev->dev;
1192         int status = urb->status;
1193         int retval = 0;
1194
1195         dbg("%s", __FUNCTION__);
1196
1197         switch (status) {
1198         case 0:
1199                 break;
1200         case -ECONNRESET:
1201         case -ENOENT:
1202         case -ESHUTDOWN:
1203                 dbg("%s - urb shutting down, %d", __FUNCTION__, status);
1204                 tport->tp_tdev->td_urb_error = 1;
1205                 wake_up_interruptible(&tport->tp_write_wait);
1206                 return;
1207         default:
1208                 dev_err(dev, "%s - nonzero urb status, %d\n",
1209                         __FUNCTION__, status );
1210                 tport->tp_tdev->td_urb_error = 1;
1211                 wake_up_interruptible(&tport->tp_write_wait);
1212         }
1213
1214         if (status == -EPIPE)
1215                 goto exit;
1216
1217         if (status) {
1218                 dev_err(dev, "%s - stopping read!\n", __FUNCTION__);
1219                 return;
1220         }
1221
1222         if (port->tty && urb->actual_length) {
1223                 usb_serial_debug_data(debug, dev, __FUNCTION__,
1224                         urb->actual_length, urb->transfer_buffer);
1225
1226                 if (!tport->tp_is_open)
1227                         dbg("%s - port closed, dropping data", __FUNCTION__);
1228                 else
1229                         ti_recv(&urb->dev->dev, port->tty, urb->transfer_buffer,
1230                                 urb->actual_length);
1231
1232                 spin_lock(&tport->tp_lock);
1233                 tport->tp_icount.rx += urb->actual_length;
1234                 spin_unlock(&tport->tp_lock);
1235         }
1236
1237 exit:
1238         /* continue to read unless stopping */
1239         spin_lock(&tport->tp_lock);
1240         if (tport->tp_read_urb_state == TI_READ_URB_RUNNING) {
1241                 urb->dev = port->serial->dev;
1242                 retval = usb_submit_urb(urb, GFP_ATOMIC);
1243         } else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING) {
1244                 tport->tp_read_urb_state = TI_READ_URB_STOPPED;
1245         }
1246         spin_unlock(&tport->tp_lock);
1247         if (retval)
1248                 dev_err(dev, "%s - resubmit read urb failed, %d\n",
1249                         __FUNCTION__, retval);
1250 }
1251
1252
1253 static void ti_bulk_out_callback(struct urb *urb)
1254 {
1255         struct ti_port *tport = (struct ti_port *)urb->context;
1256         struct usb_serial_port *port = tport->tp_port;
1257         struct device *dev = &urb->dev->dev;
1258         int status = urb->status;
1259
1260         dbg("%s - port %d", __FUNCTION__, port->number);
1261
1262         tport->tp_write_urb_in_use = 0;
1263
1264         switch (status) {
1265         case 0:
1266                 break;
1267         case -ECONNRESET:
1268         case -ENOENT:
1269         case -ESHUTDOWN:
1270                 dbg("%s - urb shutting down, %d", __FUNCTION__, status);
1271                 tport->tp_tdev->td_urb_error = 1;
1272                 wake_up_interruptible(&tport->tp_write_wait);
1273                 return;
1274         default:
1275                 dev_err(dev, "%s - nonzero urb status, %d\n",
1276                         __FUNCTION__, status);
1277                 tport->tp_tdev->td_urb_error = 1;
1278                 wake_up_interruptible(&tport->tp_write_wait);
1279         }
1280
1281         /* send any buffered data */
1282         ti_send(tport);
1283 }
1284
1285
1286 static void ti_recv(struct device *dev, struct tty_struct *tty,
1287         unsigned char *data, int length)
1288 {
1289         int cnt;
1290
1291         do {
1292                 cnt = tty_buffer_request_room(tty, length);
1293                 if (cnt < length) {
1294                         dev_err(dev, "%s - dropping data, %d bytes lost\n", __FUNCTION__, length - cnt);
1295                         if(cnt == 0)
1296                                 break;
1297                 }
1298                 tty_insert_flip_string(tty, data, cnt);
1299                 tty_flip_buffer_push(tty);
1300                 data += cnt;
1301                 length -= cnt;
1302         } while (length > 0);
1303
1304 }
1305
1306
1307 static void ti_send(struct ti_port *tport)
1308 {
1309         int count, result;
1310         struct usb_serial_port *port = tport->tp_port;
1311         struct tty_struct *tty = port->tty;
1312         unsigned long flags;
1313
1314
1315         dbg("%s - port %d", __FUNCTION__, port->number);
1316
1317         spin_lock_irqsave(&tport->tp_lock, flags);
1318
1319         if (tport->tp_write_urb_in_use) {
1320                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1321                 return;
1322         }
1323
1324         count = ti_buf_get(tport->tp_write_buf,
1325                                 port->write_urb->transfer_buffer,
1326                                 port->bulk_out_size);
1327
1328         if (count == 0) {
1329                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1330                 return;
1331         }
1332
1333         tport->tp_write_urb_in_use = 1;
1334
1335         spin_unlock_irqrestore(&tport->tp_lock, flags);
1336
1337         usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer);
1338
1339         usb_fill_bulk_urb(port->write_urb, port->serial->dev,
1340                            usb_sndbulkpipe(port->serial->dev,
1341                                             port->bulk_out_endpointAddress),
1342                            port->write_urb->transfer_buffer, count,
1343                            ti_bulk_out_callback, tport);
1344
1345         result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1346         if (result) {
1347                 dev_err(&port->dev, "%s - submit write urb failed, %d\n", __FUNCTION__, result);
1348                 tport->tp_write_urb_in_use = 0; 
1349                 /* TODO: reschedule ti_send */
1350         } else {
1351                 spin_lock_irqsave(&tport->tp_lock, flags);
1352                 tport->tp_icount.tx += count;
1353                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1354         }
1355
1356         /* more room in the buffer for new writes, wakeup */
1357         if (tty)
1358                 tty_wakeup(tty);
1359         wake_up_interruptible(&tport->tp_write_wait);
1360 }
1361
1362
1363 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr)
1364 {
1365         int status;
1366
1367         status = ti_write_byte(tport->tp_tdev,
1368                 tport->tp_uart_base_addr + TI_UART_OFFSET_MCR,
1369                 TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr);
1370
1371         if (!status)
1372                 tport->tp_shadow_mcr = mcr;
1373
1374         return status;
1375 }
1376
1377
1378 static int ti_get_lsr(struct ti_port *tport)
1379 {
1380         int size,status;
1381         struct ti_device *tdev = tport->tp_tdev;
1382         struct usb_serial_port *port = tport->tp_port;
1383         int port_number = port->number - port->serial->minor;
1384         struct ti_port_status *data;
1385
1386         dbg("%s - port %d", __FUNCTION__, port->number);
1387
1388         size = sizeof(struct ti_port_status);
1389         data = kmalloc(size, GFP_KERNEL);
1390         if (!data) {
1391                 dev_err(&port->dev, "%s - out of memory\n", __FUNCTION__);
1392                 return -ENOMEM;
1393         }
1394
1395         status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS,
1396                 (__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size);
1397         if (status) {
1398                 dev_err(&port->dev, "%s - get port status command failed, %d\n", __FUNCTION__, status);
1399                 goto free_data;
1400         }
1401
1402         dbg("%s - lsr 0x%02X", __FUNCTION__, data->bLSR);
1403
1404         tport->tp_lsr = data->bLSR;
1405
1406 free_data:
1407         kfree(data);
1408         return status;
1409 }
1410
1411
1412 static int ti_get_serial_info(struct ti_port *tport,
1413         struct serial_struct __user *ret_arg)
1414 {
1415         struct usb_serial_port *port = tport->tp_port;
1416         struct serial_struct ret_serial;
1417
1418         if (!ret_arg)
1419                 return -EFAULT;
1420
1421         memset(&ret_serial, 0, sizeof(ret_serial));
1422
1423         ret_serial.type = PORT_16550A;
1424         ret_serial.line = port->serial->minor;
1425         ret_serial.port = port->number - port->serial->minor;
1426         ret_serial.flags = tport->tp_flags;
1427         ret_serial.xmit_fifo_size = TI_WRITE_BUF_SIZE;
1428         ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800;
1429         ret_serial.closing_wait = tport->tp_closing_wait;
1430
1431         if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg)))
1432                 return -EFAULT;
1433
1434         return 0;
1435 }
1436
1437
1438 static int ti_set_serial_info(struct ti_port *tport,
1439         struct serial_struct __user *new_arg)
1440 {
1441         struct usb_serial_port *port = tport->tp_port;
1442         struct serial_struct new_serial;
1443
1444         if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
1445                 return -EFAULT;
1446
1447         tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
1448         if (port->tty)
1449                 port->tty->low_latency =
1450                         (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
1451         tport->tp_closing_wait = new_serial.closing_wait;
1452
1453         return 0;
1454 }
1455
1456
1457 static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
1458 {
1459         struct async_icount *icount;
1460         struct tty_struct *tty;
1461         unsigned long flags;
1462
1463         dbg("%s - msr 0x%02X", __FUNCTION__, msr);
1464
1465         if (msr & TI_MSR_DELTA_MASK) {
1466                 spin_lock_irqsave(&tport->tp_lock, flags);
1467                 icount = &tport->tp_icount;
1468                 if (msr & TI_MSR_DELTA_CTS)
1469                         icount->cts++;
1470                 if (msr & TI_MSR_DELTA_DSR)
1471                         icount->dsr++;
1472                 if (msr & TI_MSR_DELTA_CD)
1473                         icount->dcd++;
1474                 if (msr & TI_MSR_DELTA_RI)
1475                         icount->rng++;
1476                 wake_up_interruptible(&tport->tp_msr_wait);
1477                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1478         }
1479
1480         tport->tp_msr = msr & TI_MSR_MASK;
1481
1482         /* handle CTS flow control */
1483         tty = tport->tp_port->tty;
1484         if (tty && C_CRTSCTS(tty)) {
1485                 if (msr & TI_MSR_CTS) {
1486                         tty->hw_stopped = 0;
1487                         tty_wakeup(tty);
1488                 } else {
1489                         tty->hw_stopped = 1;
1490                 }
1491         }
1492 }
1493
1494
1495 static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush)
1496 {
1497         struct ti_device *tdev = tport->tp_tdev;
1498         struct usb_serial_port *port = tport->tp_port;
1499         wait_queue_t wait;
1500         unsigned long flags;
1501
1502         dbg("%s - port %d", __FUNCTION__, port->number);
1503
1504         spin_lock_irqsave(&tport->tp_lock, flags);
1505
1506         /* wait for data to drain from the buffer */
1507         tdev->td_urb_error = 0;
1508         init_waitqueue_entry(&wait, current);
1509         add_wait_queue(&tport->tp_write_wait, &wait);
1510         for (;;) {
1511                 set_current_state(TASK_INTERRUPTIBLE);
1512                 if (ti_buf_data_avail(tport->tp_write_buf) == 0
1513                 || timeout == 0 || signal_pending(current)
1514                 || tdev->td_urb_error
1515                 || !usb_get_intfdata(port->serial->interface))  /* disconnect */
1516                         break;
1517                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1518                 timeout = schedule_timeout(timeout);
1519                 spin_lock_irqsave(&tport->tp_lock, flags);
1520         }
1521         set_current_state(TASK_RUNNING);
1522         remove_wait_queue(&tport->tp_write_wait, &wait);
1523
1524         /* flush any remaining data in the buffer */
1525         if (flush)
1526                 ti_buf_clear(tport->tp_write_buf);
1527
1528         spin_unlock_irqrestore(&tport->tp_lock, flags);
1529
1530         /* wait for data to drain from the device */
1531         /* wait for empty tx register, plus 20 ms */
1532         timeout += jiffies;
1533         tport->tp_lsr &= ~TI_LSR_TX_EMPTY;
1534         while ((long)(jiffies - timeout) < 0 && !signal_pending(current)
1535         && !(tport->tp_lsr&TI_LSR_TX_EMPTY) && !tdev->td_urb_error
1536         && usb_get_intfdata(port->serial->interface)) {  /* not disconnected */
1537                 if (ti_get_lsr(tport))
1538                         break;
1539                 msleep_interruptible(20);
1540         }
1541 }
1542
1543
1544 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty)
1545 {
1546         unsigned long flags;
1547
1548         spin_lock_irqsave(&tport->tp_lock, flags);
1549
1550         if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
1551                 tport->tp_read_urb_state = TI_READ_URB_STOPPING;
1552
1553         spin_unlock_irqrestore(&tport->tp_lock, flags);
1554 }
1555
1556
1557 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty)
1558 {
1559         struct urb *urb;
1560         int status = 0;
1561         unsigned long flags;
1562
1563         spin_lock_irqsave(&tport->tp_lock, flags);
1564
1565         if (tport->tp_read_urb_state == TI_READ_URB_STOPPED) {
1566                 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1567                 urb = tport->tp_port->read_urb;
1568                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1569                 urb->complete = ti_bulk_in_callback;
1570                 urb->context = tport;
1571                 urb->dev = tport->tp_port->serial->dev;
1572                 status = usb_submit_urb(urb, GFP_KERNEL);
1573         } else  {
1574                 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1575                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1576         }
1577
1578         return status;
1579 }
1580
1581
1582 static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
1583         __u16 moduleid, __u16 value, __u8 *data, int size)
1584 {
1585         int status;
1586
1587         status = usb_control_msg(tdev->td_serial->dev,
1588                 usb_sndctrlpipe(tdev->td_serial->dev, 0), command,
1589                 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
1590                 value, moduleid, data, size, 1000);
1591
1592         if (status == size)
1593                 status = 0;
1594
1595         if (status > 0)
1596                 status = -ECOMM;
1597
1598         return status;
1599 }
1600
1601
1602 static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
1603         __u16 moduleid, __u16 value, __u8 *data, int size)
1604 {
1605         int status;
1606
1607         status = usb_control_msg(tdev->td_serial->dev,
1608                 usb_rcvctrlpipe(tdev->td_serial->dev, 0), command,
1609                 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN),
1610                 value, moduleid, data, size, 1000);
1611
1612         if (status == size)
1613                 status = 0;
1614
1615         if (status > 0)
1616                 status = -ECOMM;
1617
1618         return status;
1619 }
1620
1621
1622 static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
1623         __u8 mask, __u8 byte)
1624 {
1625         int status;
1626         unsigned int size;
1627         struct ti_write_data_bytes *data;
1628         struct device *dev = &tdev->td_serial->dev->dev;
1629
1630         dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", __FUNCTION__, addr, mask, byte);
1631
1632         size = sizeof(struct ti_write_data_bytes) + 2;
1633         data = kmalloc(size, GFP_KERNEL);
1634         if (!data) {
1635                 dev_err(dev, "%s - out of memory\n", __FUNCTION__);
1636                 return -ENOMEM;
1637         }
1638
1639         data->bAddrType = TI_RW_DATA_ADDR_XDATA;
1640         data->bDataType = TI_RW_DATA_BYTE;
1641         data->bDataCounter = 1;
1642         data->wBaseAddrHi = cpu_to_be16(addr>>16);
1643         data->wBaseAddrLo = cpu_to_be16(addr);
1644         data->bData[0] = mask;
1645         data->bData[1] = byte;
1646
1647         status = ti_command_out_sync(tdev, TI_WRITE_DATA, TI_RAM_PORT, 0,
1648                 (__u8 *)data, size);
1649
1650         if (status < 0)
1651                 dev_err(dev, "%s - failed, %d\n", __FUNCTION__, status);
1652
1653         kfree(data);
1654
1655         return status;
1656 }
1657
1658
1659 static int ti_download_firmware(struct ti_device *tdev,
1660         unsigned char *firmware, unsigned int firmware_size)
1661 {
1662         int status = 0;
1663         int buffer_size;
1664         int pos;
1665         int len;
1666         int done;
1667         __u8 cs = 0;
1668         __u8 *buffer;
1669         struct usb_device *dev = tdev->td_serial->dev;
1670         struct ti_firmware_header *header;
1671         unsigned int pipe = usb_sndbulkpipe(dev,
1672                 tdev->td_serial->port[0]->bulk_out_endpointAddress);
1673
1674
1675         buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
1676         buffer = kmalloc(buffer_size, GFP_KERNEL);
1677         if (!buffer) {
1678                 dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
1679                 return -ENOMEM;
1680         }
1681
1682         memcpy(buffer, firmware, firmware_size);
1683         memset(buffer+firmware_size, 0xff, buffer_size-firmware_size);
1684
1685         for(pos = sizeof(struct ti_firmware_header); pos < buffer_size; pos++)
1686                 cs = (__u8)(cs + buffer[pos]);
1687
1688         header = (struct ti_firmware_header *)buffer;
1689         header->wLength = cpu_to_le16((__u16)(buffer_size - sizeof(struct ti_firmware_header)));
1690         header->bCheckSum = cs;
1691
1692         dbg("%s - downloading firmware", __FUNCTION__);
1693         for (pos = 0; pos < buffer_size; pos += done) {
1694                 len = min(buffer_size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
1695                 status = usb_bulk_msg(dev, pipe, buffer+pos, len, &done, 1000);
1696                 if (status)
1697                         break;
1698         }
1699
1700         kfree(buffer);
1701
1702         if (status) {
1703                 dev_err(&dev->dev, "%s - error downloading firmware, %d\n", __FUNCTION__, status);
1704                 return status;
1705         }
1706
1707         dbg("%s - download successful", __FUNCTION__);
1708
1709         return 0;
1710 }
1711
1712
1713 /* Circular Buffer Functions */
1714
1715 /*
1716  * ti_buf_alloc
1717  *
1718  * Allocate a circular buffer and all associated memory.
1719  */
1720
1721 static struct circ_buf *ti_buf_alloc(void)
1722 {
1723         struct circ_buf *cb;
1724
1725         cb = kmalloc(sizeof(struct circ_buf), GFP_KERNEL);
1726         if (cb == NULL)
1727                 return NULL;
1728
1729         cb->buf = kmalloc(TI_WRITE_BUF_SIZE, GFP_KERNEL);
1730         if (cb->buf == NULL) {
1731                 kfree(cb);
1732                 return NULL;
1733         }
1734
1735         ti_buf_clear(cb);
1736
1737         return cb;
1738 }
1739
1740
1741 /*
1742  * ti_buf_free
1743  *
1744  * Free the buffer and all associated memory.
1745  */
1746
1747 static void ti_buf_free(struct circ_buf *cb)
1748 {
1749         kfree(cb->buf);
1750         kfree(cb);
1751 }
1752
1753
1754 /*
1755  * ti_buf_clear
1756  *
1757  * Clear out all data in the circular buffer.
1758  */
1759
1760 static void ti_buf_clear(struct circ_buf *cb)
1761 {
1762         cb->head = cb->tail = 0;
1763 }
1764
1765
1766 /*
1767  * ti_buf_data_avail
1768  *
1769  * Return the number of bytes of data available in the circular
1770  * buffer.
1771  */
1772
1773 static int ti_buf_data_avail(struct circ_buf *cb)
1774 {
1775         return CIRC_CNT(cb->head,cb->tail,TI_WRITE_BUF_SIZE);
1776 }
1777
1778
1779 /*
1780  * ti_buf_space_avail
1781  *
1782  * Return the number of bytes of space available in the circular
1783  * buffer.
1784  */
1785
1786 static int ti_buf_space_avail(struct circ_buf *cb)
1787 {
1788         return CIRC_SPACE(cb->head,cb->tail,TI_WRITE_BUF_SIZE);
1789 }
1790
1791
1792 /*
1793  * ti_buf_put
1794  *
1795  * Copy data data from a user buffer and put it into the circular buffer.
1796  * Restrict to the amount of space available.
1797  *
1798  * Return the number of bytes copied.
1799  */
1800
1801 static int ti_buf_put(struct circ_buf *cb, const char *buf, int count)
1802 {
1803         int c, ret = 0;
1804
1805         while (1) {
1806                 c = CIRC_SPACE_TO_END(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
1807                 if (count < c)
1808                         c = count;
1809                 if (c <= 0)
1810                         break;
1811                 memcpy(cb->buf + cb->head, buf, c);
1812                 cb->head = (cb->head + c) & (TI_WRITE_BUF_SIZE-1);
1813                 buf += c;
1814                 count -= c;
1815                 ret += c;
1816         }
1817
1818         return ret;
1819 }
1820
1821
1822 /*
1823  * ti_buf_get
1824  *
1825  * Get data from the circular buffer and copy to the given buffer.
1826  * Restrict to the amount of data available.
1827  *
1828  * Return the number of bytes copied.
1829  */
1830
1831 static int ti_buf_get(struct circ_buf *cb, char *buf, int count)
1832 {
1833         int c, ret = 0;
1834
1835         while (1) {
1836                 c = CIRC_CNT_TO_END(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
1837                 if (count < c)
1838                         c = count;
1839                 if (c <= 0)
1840                         break;
1841                 memcpy(buf, cb->buf + cb->tail, c);
1842                 cb->tail = (cb->tail + c) & (TI_WRITE_BUF_SIZE-1);
1843                 buf += c;
1844                 count -= c;
1845                 ret += c;
1846         }
1847
1848         return ret;
1849 }