[PATCH] libertas: convert libertas_mpp into anycast_mask
[linux-2.6] / drivers / net / saa9730.h
1 /*
2  * Copyright (C) 2000, 2005  MIPS Technologies, Inc.  All rights reserved.
3  *      Authors: Carsten Langgaard <carstenl@mips.com>
4  *               Maciej W. Rozycki <macro@mips.com>
5  *
6  * ########################################################################
7  *
8  *  This program is free software; you can distribute it and/or modify it
9  *  under the terms of the GNU General Public License (Version 2) as
10  *  published by the Free Software Foundation.
11  *
12  *  This program is distributed in the hope it will be useful, but WITHOUT
13  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14  *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
15  *  for more details.
16  *
17  *  You should have received a copy of the GNU General Public License along
18  *  with this program; if not, write to the Free Software Foundation, Inc.,
19  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
20  *
21  * ########################################################################
22  *
23  * SAA9730 ethernet driver description.
24  *
25  */
26 #ifndef _SAA9730_H
27 #define _SAA9730_H
28
29
30 /* Number of 6-byte entries in the CAM. */
31 #define LAN_SAA9730_CAM_ENTRIES              10
32 #define LAN_SAA9730_CAM_DWORDS               ((LAN_SAA9730_CAM_ENTRIES*6)/4)
33
34 /* TX and RX packet size: fixed to 2048 bytes, according to HW requirements. */
35 #define LAN_SAA9730_PACKET_SIZE                       2048
36
37 /*
38  * Number of TX buffers = number of RX buffers = 2, which is fixed according
39  * to HW requirements.
40  */
41 #define LAN_SAA9730_BUFFERS                           2
42
43 /* Number of RX packets per RX buffer. */
44 #define LAN_SAA9730_RCV_Q_SIZE                        15
45
46 /* Number of TX packets per TX buffer. */
47 #define LAN_SAA9730_TXM_Q_SIZE                        15
48
49 /*
50  * We get an interrupt for each LAN_SAA9730_DEFAULT_RCV_Q_INT_THRESHOLD
51  * packets received.
52  * If however we receive less than  LAN_SAA9730_DEFAULT_RCV_Q_INT_THRESHOLD
53  * packets, the hardware can timeout after a certain time and still tell
54  * us packets have arrived.
55  * The timeout value in unit of 32 PCI clocks (33Mhz).
56  * The value 200 approximates 0.0002 seconds.
57  */
58 #define LAN_SAA9730_RCV_Q_INT_THRESHOLD               1
59 #define LAN_SAA9730_DEFAULT_TIME_OUT_CNT              10
60
61 #define RXSF_NDIS                       0
62 #define RXSF_READY                      2
63 #define RXSF_HWDONE                     3
64
65 #define TXSF_EMPTY                      0
66 #define TXSF_READY                      2
67 #define TXSF_HWDONE                     3
68
69 #define LANEND_LITTLE                   0
70 #define LANEND_BIG_2143                 1
71 #define LANEND_BIG_4321                 2
72
73 #define LANMB_ANY                       0
74 #define LANMB_8                         1
75 #define LANMB_32                        2
76 #define LANMB_64                        3
77
78 #define MACCM_AUTOMATIC                 0
79 #define MACCM_10MB                      1
80 #define MACCM_MII                       2
81
82 /*
83  * PHY definitions for Basic registers of QS6612 (used on MIPS ATLAS board)
84  */
85 #define PHY_CONTROL                     0x0
86 #define PHY_STATUS                      0x1
87 #define PHY_STATUS_LINK_UP              0x4
88 #define PHY_CONTROL_RESET               0x8000
89 #define PHY_CONTROL_AUTO_NEG            0x1000
90 #define PHY_CONTROL_RESTART_AUTO_NEG    0x0200
91 #define PHY_ADDRESS                     0x0
92
93 /* PK_COUNT register. */
94 #define PK_COUNT_TX_A_SHF               24
95 #define PK_COUNT_TX_A_MSK               (0xff << PK_COUNT_TX_A_SHF)
96 #define PK_COUNT_TX_B_SHF               16
97 #define PK_COUNT_TX_B_MSK               (0xff << PK_COUNT_TX_B_SHF)
98 #define PK_COUNT_RX_A_SHF               8
99 #define PK_COUNT_RX_A_MSK               (0xff << PK_COUNT_RX_A_SHF)
100 #define PK_COUNT_RX_B_SHF               0
101 #define PK_COUNT_RX_B_MSK               (0xff << PK_COUNT_RX_B_SHF)
102
103 /* OK2USE register. */
104 #define OK2USE_TX_A                     0x8
105 #define OK2USE_TX_B                     0x4
106 #define OK2USE_RX_A                     0x2
107 #define OK2USE_RX_B                     0x1
108
109 /* LAN DMA CONTROL register. */
110 #define DMA_CTL_BLK_INT                 0x80000000
111 #define DMA_CTL_MAX_XFER_SHF            18
112 #define DMA_CTL_MAX_XFER_MSK            (0x3 << LAN_DMA_CTL_MAX_XFER_SHF)
113 #define DMA_CTL_ENDIAN_SHF              16
114 #define DMA_CTL_ENDIAN_MSK              (0x3 << LAN_DMA_CTL_ENDIAN_SHF)
115 #define DMA_CTL_RX_INT_COUNT_SHF        8
116 #define DMA_CTL_RX_INT_COUNT_MSK        (0xff << LAN_DMA_CTL_RX_INT_COUNT_SHF)
117 #define DMA_CTL_EN_TX_DMA               0x00000080
118 #define DMA_CTL_EN_RX_DMA               0x00000040
119 #define DMA_CTL_RX_INT_BUFFUL_EN        0x00000020
120 #define DMA_CTL_RX_INT_TO_EN            0x00000010
121 #define DMA_CTL_RX_INT_EN               0x00000008
122 #define DMA_CTL_TX_INT_EN               0x00000004
123 #define DMA_CTL_MAC_TX_INT_EN           0x00000002
124 #define DMA_CTL_MAC_RX_INT_EN           0x00000001
125
126 /* DMA STATUS register. */
127 #define DMA_STATUS_BAD_ADDR_SHF         16
128 #define DMA_STATUS_BAD_ADDR_MSK         (0xf << DMA_STATUS_BAD_ADDR_SHF)
129 #define DMA_STATUS_RX_PKTS_RECEIVED_SHF 8
130 #define DMA_STATUS_RX_PKTS_RECEIVED_MSK (0xff << DMA_STATUS_RX_PKTS_RECEIVED_SHF)
131 #define DMA_STATUS_TX_EN_SYNC           0x00000080
132 #define DMA_STATUS_RX_BUF_A_FUL         0x00000040
133 #define DMA_STATUS_RX_BUF_B_FUL         0x00000020
134 #define DMA_STATUS_RX_TO_INT            0x00000010
135 #define DMA_STATUS_RX_INT               0x00000008
136 #define DMA_STATUS_TX_INT               0x00000004
137 #define DMA_STATUS_MAC_TX_INT           0x00000002
138 #define DMA_STATUS_MAC_RX_INT           0x00000001
139
140 /* DMA TEST/PANIC SWITHES register. */
141 #define DMA_TEST_LOOPBACK               0x01000000
142 #define DMA_TEST_SW_RESET               0x00000001
143
144 /* MAC CONTROL register. */
145 #define MAC_CONTROL_EN_MISS_ROLL        0x00002000
146 #define MAC_CONTROL_MISS_ROLL           0x00000400
147 #define MAC_CONTROL_LOOP10              0x00000080
148 #define MAC_CONTROL_CONN_SHF            5
149 #define MAC_CONTROL_CONN_MSK            (0x3 << MAC_CONTROL_CONN_SHF)
150 #define MAC_CONTROL_MAC_LOOP            0x00000010
151 #define MAC_CONTROL_FULL_DUP            0x00000008
152 #define MAC_CONTROL_RESET               0x00000004
153 #define MAC_CONTROL_HALT_IMM            0x00000002
154 #define MAC_CONTROL_HALT_REQ            0x00000001
155
156 /* CAM CONTROL register. */
157 #define CAM_CONTROL_COMP_EN             0x00000010
158 #define CAM_CONTROL_NEG_CAM             0x00000008
159 #define CAM_CONTROL_BROAD_ACC           0x00000004
160 #define CAM_CONTROL_GROUP_ACC           0x00000002
161 #define CAM_CONTROL_STATION_ACC         0x00000001
162
163 /* TRANSMIT CONTROL register. */
164 #define TX_CTL_EN_COMP                  0x00004000
165 #define TX_CTL_EN_TX_PAR                0x00002000
166 #define TX_CTL_EN_LATE_COLL             0x00001000
167 #define TX_CTL_EN_EX_COLL               0x00000800
168 #define TX_CTL_EN_L_CARR                0x00000400
169 #define TX_CTL_EN_EX_DEFER              0x00000200
170 #define TX_CTL_EN_UNDER                 0x00000100
171 #define TX_CTL_MII10                    0x00000080
172 #define TX_CTL_SD_PAUSE                 0x00000040
173 #define TX_CTL_NO_EX_DEF0               0x00000020
174 #define TX_CTL_F_BACK                   0x00000010
175 #define TX_CTL_NO_CRC                   0x00000008
176 #define TX_CTL_NO_PAD                   0x00000004
177 #define TX_CTL_TX_HALT                  0x00000002
178 #define TX_CTL_TX_EN                    0x00000001
179
180 /* TRANSMIT STATUS register. */
181 #define TX_STATUS_SQ_ERR                0x00010000
182 #define TX_STATUS_TX_HALTED             0x00008000
183 #define TX_STATUS_COMP                  0x00004000
184 #define TX_STATUS_TX_PAR                0x00002000
185 #define TX_STATUS_LATE_COLL             0x00001000
186 #define TX_STATUS_TX10_STAT             0x00000800
187 #define TX_STATUS_L_CARR                0x00000400
188 #define TX_STATUS_EX_DEFER              0x00000200
189 #define TX_STATUS_UNDER                 0x00000100
190 #define TX_STATUS_IN_TX                 0x00000080
191 #define TX_STATUS_PAUSED                0x00000040
192 #define TX_STATUS_TX_DEFERRED           0x00000020
193 #define TX_STATUS_EX_COLL               0x00000010
194 #define TX_STATUS_TX_COLL_SHF           0
195 #define TX_STATUS_TX_COLL_MSK           (0xf << TX_STATUS_TX_COLL_SHF)
196
197 /* RECEIVE CONTROL register. */
198 #define RX_CTL_EN_GOOD                  0x00004000
199 #define RX_CTL_EN_RX_PAR                0x00002000
200 #define RX_CTL_EN_LONG_ERR              0x00000800
201 #define RX_CTL_EN_OVER                  0x00000400
202 #define RX_CTL_EN_CRC_ERR               0x00000200
203 #define RX_CTL_EN_ALIGN                 0x00000100
204 #define RX_CTL_IGNORE_CRC               0x00000040
205 #define RX_CTL_PASS_CTL                 0x00000020
206 #define RX_CTL_STRIP_CRC                0x00000010
207 #define RX_CTL_SHORT_EN                 0x00000008
208 #define RX_CTL_LONG_EN                  0x00000004
209 #define RX_CTL_RX_HALT                  0x00000002
210 #define RX_CTL_RX_EN                    0x00000001
211
212 /* RECEIVE STATUS register. */
213 #define RX_STATUS_RX_HALTED             0x00008000
214 #define RX_STATUS_GOOD                  0x00004000
215 #define RX_STATUS_RX_PAR                0x00002000
216 #define RX_STATUS_LONG_ERR              0x00000800
217 #define RX_STATUS_OVERFLOW              0x00000400
218 #define RX_STATUS_CRC_ERR               0x00000200
219 #define RX_STATUS_ALIGN_ERR             0x00000100
220 #define RX_STATUS_RX10_STAT             0x00000080
221 #define RX_STATUS_INT_RX                0x00000040
222 #define RX_STATUS_CTL_RECD              0x00000020
223
224 /* MD_CA register. */
225 #define MD_CA_PRE_SUP                   0x00001000
226 #define MD_CA_BUSY                      0x00000800
227 #define MD_CA_WR                        0x00000400
228 #define MD_CA_PHY_SHF                   5
229 #define MD_CA_PHY_MSK                   (0x1f << MD_CA_PHY_SHF)
230 #define MD_CA_ADDR_SHF                  0
231 #define MD_CA_ADDR_MSK                  (0x1f << MD_CA_ADDR_SHF)
232
233 /* Tx Status/Control. */
234 #define TX_STAT_CTL_OWNER_SHF           30
235 #define TX_STAT_CTL_OWNER_MSK           (0x3 << TX_STAT_CTL_OWNER_SHF)
236 #define TX_STAT_CTL_FRAME_SHF           27
237 #define TX_STAT_CTL_FRAME_MSK           (0x7 << TX_STAT_CTL_FRAME_SHF)
238 #define TX_STAT_CTL_STATUS_SHF          11
239 #define TX_STAT_CTL_STATUS_MSK          (0x1ffff << TX_STAT_CTL_STATUS_SHF)
240 #define TX_STAT_CTL_LENGTH_SHF          0
241 #define TX_STAT_CTL_LENGTH_MSK          (0x7ff << TX_STAT_CTL_LENGTH_SHF)
242
243 #define TX_STAT_CTL_ERROR_MSK           ((TX_STATUS_SQ_ERR      |     \
244                                           TX_STATUS_TX_HALTED   |     \
245                                           TX_STATUS_TX_PAR      |     \
246                                           TX_STATUS_LATE_COLL   |     \
247                                           TX_STATUS_L_CARR      |     \
248                                           TX_STATUS_EX_DEFER    |     \
249                                           TX_STATUS_UNDER       |     \
250                                           TX_STATUS_PAUSED      |     \
251                                           TX_STATUS_TX_DEFERRED |     \
252                                           TX_STATUS_EX_COLL     |     \
253                                           TX_STATUS_TX_COLL_MSK)      \
254                                                     << TX_STAT_CTL_STATUS_SHF)
255 #define TX_STAT_CTL_INT_AFTER_TX        0x4
256
257 /* Rx Status/Control. */
258 #define RX_STAT_CTL_OWNER_SHF           30
259 #define RX_STAT_CTL_OWNER_MSK           (0x3 << RX_STAT_CTL_OWNER_SHF)
260 #define RX_STAT_CTL_STATUS_SHF          11
261 #define RX_STAT_CTL_STATUS_MSK          (0xffff << RX_STAT_CTL_STATUS_SHF)
262 #define RX_STAT_CTL_LENGTH_SHF          0
263 #define RX_STAT_CTL_LENGTH_MSK          (0x7ff << RX_STAT_CTL_LENGTH_SHF)
264
265
266
267 /* The SAA9730 (LAN) controller register map, as seen via the PCI-bus. */
268 #define SAA9730_LAN_REGS_ADDR   0x20400
269 #define SAA9730_LAN_REGS_SIZE   0x00400
270
271 struct lan_saa9730_regmap {
272         volatile unsigned int TxBuffA;                  /* 0x20400 */
273         volatile unsigned int TxBuffB;                  /* 0x20404 */
274         volatile unsigned int RxBuffA;                  /* 0x20408 */
275         volatile unsigned int RxBuffB;                  /* 0x2040c */
276         volatile unsigned int PacketCount;              /* 0x20410 */
277         volatile unsigned int Ok2Use;                   /* 0x20414 */
278         volatile unsigned int LanDmaCtl;                /* 0x20418 */
279         volatile unsigned int Timeout;                  /* 0x2041c */
280         volatile unsigned int DmaStatus;                /* 0x20420 */
281         volatile unsigned int DmaTest;                  /* 0x20424 */
282         volatile unsigned char filler20428[0x20430 - 0x20428];
283         volatile unsigned int PauseCount;               /* 0x20430 */
284         volatile unsigned int RemotePauseCount;         /* 0x20434 */
285         volatile unsigned char filler20438[0x20440 - 0x20438];
286         volatile unsigned int MacCtl;                   /* 0x20440 */
287         volatile unsigned int CamCtl;                   /* 0x20444 */
288         volatile unsigned int TxCtl;                    /* 0x20448 */
289         volatile unsigned int TxStatus;                 /* 0x2044c */
290         volatile unsigned int RxCtl;                    /* 0x20450 */
291         volatile unsigned int RxStatus;                 /* 0x20454 */
292         volatile unsigned int StationMgmtData;          /* 0x20458 */
293         volatile unsigned int StationMgmtCtl;           /* 0x2045c */
294         volatile unsigned int CamAddress;               /* 0x20460 */
295         volatile unsigned int CamData;                  /* 0x20464 */
296         volatile unsigned int CamEnable;                /* 0x20468 */
297         volatile unsigned char filler2046c[0x20500 - 0x2046c];
298         volatile unsigned int DebugPCIMasterAddr;       /* 0x20500 */
299         volatile unsigned int DebugLanTxStateMachine;   /* 0x20504 */
300         volatile unsigned int DebugLanRxStateMachine;   /* 0x20508 */
301         volatile unsigned int DebugLanTxFifoPointers;   /* 0x2050c */
302         volatile unsigned int DebugLanRxFifoPointers;   /* 0x20510 */
303         volatile unsigned int DebugLanCtlStateMachine;  /* 0x20514 */
304 };
305 typedef volatile struct lan_saa9730_regmap t_lan_saa9730_regmap;
306
307
308 /* EVM interrupt control registers. */
309 #define EVM_LAN_INT                     0x00010000
310 #define EVM_MASTER_EN                   0x00000001
311
312 /* The SAA9730 (EVM) controller register map, as seen via the PCI-bus. */
313 #define SAA9730_EVM_REGS_ADDR   0x02000
314 #define SAA9730_EVM_REGS_SIZE   0x00400
315
316 struct evm_saa9730_regmap {
317         volatile unsigned int InterruptStatus1;         /* 0x2000 */
318         volatile unsigned int InterruptEnable1;         /* 0x2004 */
319         volatile unsigned int InterruptMonitor1;        /* 0x2008 */
320         volatile unsigned int Counter;                  /* 0x200c */
321         volatile unsigned int CounterThreshold;         /* 0x2010 */
322         volatile unsigned int CounterControl;           /* 0x2014 */
323         volatile unsigned int GpioControl1;             /* 0x2018 */
324         volatile unsigned int InterruptStatus2;         /* 0x201c */
325         volatile unsigned int InterruptEnable2;         /* 0x2020 */
326         volatile unsigned int InterruptMonitor2;        /* 0x2024 */
327         volatile unsigned int GpioControl2;             /* 0x2028 */
328         volatile unsigned int InterruptBlock1;          /* 0x202c */
329         volatile unsigned int InterruptBlock2;          /* 0x2030 */
330 };
331 typedef volatile struct evm_saa9730_regmap t_evm_saa9730_regmap;
332
333
334 struct lan_saa9730_private {
335         /*
336          * Rx/Tx packet buffers.
337          * The Rx and Tx packets must be PACKET_SIZE aligned.
338          */
339         void            *buffer_start;
340         unsigned int    buffer_size;
341
342         /*
343          * DMA address of beginning of this object, returned
344          * by pci_alloc_consistent().
345          */
346         dma_addr_t      dma_addr;
347
348         /* Pointer to the associated pci device structure */
349         struct pci_dev  *pci_dev;
350
351         /* Pointer for the SAA9730 LAN controller register set. */
352         t_lan_saa9730_regmap *lan_saa9730_regs;
353
354         /* Pointer to the SAA9730 EVM register. */
355         t_evm_saa9730_regmap *evm_saa9730_regs;
356
357         /* Rcv buffer Index. */
358         unsigned char NextRcvPacketIndex;
359         /* Next buffer index. */
360         unsigned char NextRcvBufferIndex;
361
362         /* Index of next packet to use in that buffer. */
363         unsigned char NextTxmPacketIndex;
364         /* Next buffer index. */
365         unsigned char NextTxmBufferIndex;
366
367         /* Index of first pending packet ready to send. */
368         unsigned char PendingTxmPacketIndex;
369         /* Pending buffer index. */
370         unsigned char PendingTxmBufferIndex;
371
372         unsigned char DmaRcvPackets;
373         unsigned char DmaTxmPackets;
374
375         void          *TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE];
376         void          *RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE];
377         unsigned int TxBufferFree[LAN_SAA9730_BUFFERS];
378
379         unsigned char PhysicalAddress[LAN_SAA9730_CAM_ENTRIES][6];
380
381         struct net_device_stats stats;
382         spinlock_t lock;
383 };
384
385 #endif /* _SAA9730_H */