git.oblomov.eu Git - linux-2.6/blob - drivers/usb/core/hcd-pci.c

   1 /*
   2  * (C) Copyright David Brownell 2000-2002
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License as published by the
   6  * Free Software Foundation; either version 2 of the License, or (at your
   7  * option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful, but
  10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  * for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software Foundation,
  16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  17  */
  18
  19 #include <linux/kernel.h>
  20 #include <linux/module.h>
  21 #include <linux/pci.h>
  22 #include <linux/usb.h>
  23
  24 #include <asm/io.h>
  25 #include <asm/irq.h>
  26
  27 #ifdef CONFIG_PPC_PMAC
  28 #include <asm/machdep.h>
  29 #include <asm/pmac_feature.h>
  30 #include <asm/pci-bridge.h>
  31 #include <asm/prom.h>
  32 #endif
  33
  34 #include "usb.h"
  35 #include "hcd.h"
  36
  37
  38 /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
  39
  40
  41 /*-------------------------------------------------------------------------*/
  42
  43 /* configure so an HC device and id are always provided */
  44 /* always called with process context; sleeping is OK */
  45
  46 /**
  47  * usb_hcd_pci_probe - initialize PCI-based HCDs
  48  * @dev: USB Host Controller being probed
  49  * @id: pci hotplug id connecting controller to HCD framework
  50  * Context: !in_interrupt()
  51  *
  52  * Allocates basic PCI resources for this USB host controller, and
  53  * then invokes the start() method for the HCD associated with it
  54  * through the hotplug entry's driver_data.
  55  *
  56  * Store this function in the HCD's struct pci_driver as probe().
  57  */
  58 int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
  59 {
  60         struct hc_driver        *driver;
  61         struct usb_hcd          *hcd;
  62         int                     retval;
  63
  64         if (usb_disabled())
  65                 return -ENODEV;
  66
  67         if (!id)
  68                 return -EINVAL;
  69         driver = (struct hc_driver *)id->driver_data;
  70         if (!driver)
  71                 return -EINVAL;
  72
  73         if (pci_enable_device(dev) < 0)
  74                 return -ENODEV;
  75         dev->current_state = PCI_D0;
  76
  77         if (!dev->irq) {
  78                 dev_err(&dev->dev,
  79                         "Found HC with no IRQ.  Check BIOS/PCI %s setup!\n",
  80                         pci_name(dev));
  81                 retval = -ENODEV;
  82                 goto err1;
  83         }
  84
  85         hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
  86         if (!hcd) {
  87                 retval = -ENOMEM;
  88                 goto err1;
  89         }
  90
  91         if (driver->flags & HCD_MEMORY) {
  92                 /* EHCI, OHCI */
  93                 hcd->rsrc_start = pci_resource_start(dev, 0);
  94                 hcd->rsrc_len = pci_resource_len(dev, 0);
  95                 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
  96                                 driver->description)) {
  97                         dev_dbg(&dev->dev, "controller already in use\n");
  98                         retval = -EBUSY;
  99                         goto err2;
 100                 }
 101                 hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
 102                 if (hcd->regs == NULL) {
 103                         dev_dbg(&dev->dev, "error mapping memory\n");
 104                         retval = -EFAULT;
 105                         goto err3;
 106                 }
 107
 108         } else {
 109                 /* UHCI */
 110                 int     region;
 111
 112                 for (region = 0; region < PCI_ROM_RESOURCE; region++) {
 113                         if (!(pci_resource_flags(dev, region) &
 114                                         IORESOURCE_IO))
 115                                 continue;
 116
 117                         hcd->rsrc_start = pci_resource_start(dev, region);
 118                         hcd->rsrc_len = pci_resource_len(dev, region);
 119                         if (request_region(hcd->rsrc_start, hcd->rsrc_len,
 120                                         driver->description))
 121                                 break;
 122                 }
 123                 if (region == PCI_ROM_RESOURCE) {
 124                         dev_dbg(&dev->dev, "no i/o regions available\n");
 125                         retval = -EBUSY;
 126                         goto err1;
 127                 }
 128         }
 129
 130         pci_set_master(dev);
 131
 132         retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
 133         if (retval != 0)
 134                 goto err4;
 135         return retval;
 136
 137  err4:
 138         if (driver->flags & HCD_MEMORY) {
 139                 iounmap(hcd->regs);
 140  err3:
 141                 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 142         } else
 143                 release_region(hcd->rsrc_start, hcd->rsrc_len);
 144  err2:
 145         usb_put_hcd(hcd);
 146  err1:
 147         pci_disable_device(dev);
 148         dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
 149         return retval;
 150 }
 151 EXPORT_SYMBOL_GPL(usb_hcd_pci_probe);
 152
 153
 154 /* may be called without controller electrically present */
 155 /* may be called with controller, bus, and devices active */
 156
 157 /**
 158  * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
 159  * @dev: USB Host Controller being removed
 160  * Context: !in_interrupt()
 161  *
 162  * Reverses the effect of usb_hcd_pci_probe(), first invoking
 163  * the HCD's stop() method.  It is always called from a thread
 164  * context, normally "rmmod", "apmd", or something similar.
 165  *
 166  * Store this function in the HCD's struct pci_driver as remove().
 167  */
 168 void usb_hcd_pci_remove(struct pci_dev *dev)
 169 {
 170         struct usb_hcd          *hcd;
 171
 172         hcd = pci_get_drvdata(dev);
 173         if (!hcd)
 174                 return;
 175
 176         usb_remove_hcd(hcd);
 177         if (hcd->driver->flags & HCD_MEMORY) {
 178                 iounmap(hcd->regs);
 179                 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 180         } else {
 181                 release_region(hcd->rsrc_start, hcd->rsrc_len);
 182         }
 183         usb_put_hcd(hcd);
 184         pci_disable_device(dev);
 185 }
 186 EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
 187
 188
 189 #ifdef  CONFIG_PM
 190
 191 /**
 192  * usb_hcd_pci_suspend - power management suspend of a PCI-based HCD
 193  * @dev: USB Host Controller being suspended
 194  * @message: semantics in flux
 195  *
 196  * Store this function in the HCD's struct pci_driver as suspend().
 197  */
 198 int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
 199 {
 200         struct usb_hcd          *hcd;
 201         int                     retval = 0;
 202         int                     has_pci_pm;
 203
 204         hcd = pci_get_drvdata(dev);
 205
 206         /* Root hub suspend should have stopped all downstream traffic,
 207          * and all bus master traffic.  And done so for both the interface
 208          * and the stub usb_device (which we check here).  But maybe it
 209          * didn't; writing sysfs power/state files ignores such rules...
 210          *
 211          * We must ignore the FREEZE vs SUSPEND distinction here, because
 212          * otherwise the swsusp will save (and restore) garbage state.
 213          */
 214         if (!(hcd->state == HC_STATE_SUSPENDED ||
 215                         hcd->state == HC_STATE_HALT))
 216                 return -EBUSY;
 217
 218         if (hcd->driver->pci_suspend) {
 219                 retval = hcd->driver->pci_suspend(hcd, message);
 220                 suspend_report_result(hcd->driver->pci_suspend, retval);
 221                 if (retval)
 222                         goto done;
 223         }
 224         synchronize_irq(dev->irq);
 225
 226         /* FIXME until the generic PM interfaces change a lot more, this
 227          * can't use PCI D1 and D2 states.  For example, the confusion
 228          * between messages and states will need to vanish, and messages
 229          * will need to provide a target system state again.
 230          *
 231          * It'll be important to learn characteristics of the target state,
 232          * especially on embedded hardware where the HCD will often be in
 233          * charge of an external VBUS power supply and one or more clocks.
 234          * Some target system states will leave them active; others won't.
 235          * (With PCI, that's often handled by platform BIOS code.)
 236          */
 237
 238         /* even when the PCI layer rejects some of the PCI calls
 239          * below, HCs can try global suspend and reduce DMA traffic.
 240          * PM-sensitive HCDs may already have done this.
 241          */
 242         has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
 243
 244         /* Downstream ports from this root hub should already be quiesced, so
 245          * there will be no DMA activity.  Now we can shut down the upstream
 246          * link (except maybe for PME# resume signaling) and enter some PCI
 247          * low power state, if the hardware allows.
 248          */
 249         if (hcd->state == HC_STATE_SUSPENDED) {
 250
 251                 /* no DMA or IRQs except when HC is active */
 252                 if (dev->current_state == PCI_D0) {
 253                         pci_save_state(dev);
 254                         pci_disable_device(dev);
 255                 }
 256
 257                 if (message.event == PM_EVENT_FREEZE ||
 258                                 message.event == PM_EVENT_PRETHAW) {
 259                         dev_dbg(hcd->self.controller, "--> no state change\n");
 260                         goto done;
 261                 }
 262
 263                 if (!has_pci_pm) {
 264                         dev_dbg(hcd->self.controller, "--> PCI D0/legacy\n");
 265                         goto done;
 266                 }
 267
 268                 /* NOTE:  dev->current_state becomes nonzero only here, and
 269                  * only for devices that support PCI PM.  Also, exiting
 270                  * PCI_D3 (but not PCI_D1 or PCI_D2) is allowed to reset
 271                  * some device state (e.g. as part of clock reinit).
 272                  */
 273                 retval = pci_set_power_state(dev, PCI_D3hot);
 274                 suspend_report_result(pci_set_power_state, retval);
 275                 if (retval == 0) {
 276                         int wake = device_can_wakeup(&hcd->self.root_hub->dev);
 277
 278                         wake = wake && device_may_wakeup(hcd->self.controller);
 279
 280                         dev_dbg(hcd->self.controller, "--> PCI D3%s\n",
 281                                         wake ? "/wakeup" : "");
 282
 283                         /* Ignore these return values.  We rely on pci code to
 284                          * reject requests the hardware can't implement, rather
 285                          * than coding the same thing.
 286                          */
 287                         (void) pci_enable_wake(dev, PCI_D3hot, wake);
 288                         (void) pci_enable_wake(dev, PCI_D3cold, wake);
 289                 } else {
 290                         dev_dbg(&dev->dev, "PCI D3 suspend fail, %d\n",
 291                                         retval);
 292                         (void) usb_hcd_pci_resume(dev);
 293                 }
 294
 295         } else if (hcd->state != HC_STATE_HALT) {
 296                 dev_dbg(hcd->self.controller, "hcd state %d; not suspended\n",
 297                         hcd->state);
 298                 WARN_ON(1);
 299                 retval = -EINVAL;
 300         }
 301
 302 done:
 303         if (retval == 0) {
 304 #ifdef CONFIG_PPC_PMAC
 305                 /* Disable ASIC clocks for USB */
 306                 if (machine_is(powermac)) {
 307                         struct device_node      *of_node;
 308
 309                         of_node = pci_device_to_OF_node(dev);
 310                         if (of_node)
 311                                 pmac_call_feature(PMAC_FTR_USB_ENABLE,
 312                                                         of_node, 0, 0);
 313                 }
 314 #endif
 315         }
 316
 317         return retval;
 318 }
 319 EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
 320
 321 /**
 322  * usb_hcd_pci_resume - power management resume of a PCI-based HCD
 323  * @dev: USB Host Controller being resumed
 324  *
 325  * Store this function in the HCD's struct pci_driver as resume().
 326  */
 327 int usb_hcd_pci_resume(struct pci_dev *dev)
 328 {
 329         struct usb_hcd          *hcd;
 330         int                     retval;
 331
 332         hcd = pci_get_drvdata(dev);
 333         if (hcd->state != HC_STATE_SUSPENDED) {
 334                 dev_dbg(hcd->self.controller,
 335                                 "can't resume, not suspended!\n");
 336                 return 0;
 337         }
 338
 339 #ifdef CONFIG_PPC_PMAC
 340         /* Reenable ASIC clocks for USB */
 341         if (machine_is(powermac)) {
 342                 struct device_node *of_node;
 343
 344                 of_node = pci_device_to_OF_node(dev);
 345                 if (of_node)
 346                         pmac_call_feature(PMAC_FTR_USB_ENABLE,
 347                                                 of_node, 0, 1);
 348         }
 349 #endif
 350
 351         /* NOTE:  chip docs cover clean "real suspend" cases (what Linux
 352          * calls "standby", "suspend to RAM", and so on).  There are also
 353          * dirty cases when swsusp fakes a suspend in "shutdown" mode.
 354          */
 355         if (dev->current_state != PCI_D0) {
 356 #ifdef  DEBUG
 357                 int     pci_pm;
 358                 u16     pmcr;
 359
 360                 pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
 361                 pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr);
 362                 pmcr &= PCI_PM_CTRL_STATE_MASK;
 363                 if (pmcr) {
 364                         /* Clean case:  power to USB and to HC registers was
 365                          * maintained; remote wakeup is easy.
 366                          */
 367                         dev_dbg(hcd->self.controller, "resume from PCI D%d\n",
 368                                         pmcr);
 369                 } else {
 370                         /* Clean:  HC lost Vcc power, D0 uninitialized
 371                          *   + Vaux may have preserved port and transceiver
 372                          *     state ... for remote wakeup from D3cold
 373                          *   + or not; HCD must reinit + re-enumerate
 374                          *
 375                          * Dirty: D0 semi-initialized cases with swsusp
 376                          *   + after BIOS init
 377                          *   + after Linux init (HCD statically linked)
 378                          */
 379                         dev_dbg(hcd->self.controller,
 380                                 "PCI D0, from previous PCI D%d\n",
 381                                 dev->current_state);
 382                 }
 383 #endif
 384                 /* yes, ignore these results too... */
 385                 (void) pci_enable_wake(dev, dev->current_state, 0);
 386                 (void) pci_enable_wake(dev, PCI_D3cold, 0);
 387         } else {
 388                 /* Same basic cases: clean (powered/not), dirty */
 389                 dev_dbg(hcd->self.controller, "PCI legacy resume\n");
 390         }
 391
 392         /* NOTE:  the PCI API itself is asymmetric here.  We don't need to
 393          * pci_set_power_state(PCI_D0) since that's part of re-enabling;
 394          * but that won't re-enable bus mastering.  Yet pci_disable_device()
 395          * explicitly disables bus mastering...
 396          */
 397         retval = pci_enable_device(dev);
 398         if (retval < 0) {
 399                 dev_err(hcd->self.controller,
 400                         "can't re-enable after resume, %d!\n", retval);
 401                 return retval;
 402         }
 403         pci_set_master(dev);
 404         pci_restore_state(dev);
 405
 406         clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
 407
 408         if (hcd->driver->pci_resume) {
 409                 retval = hcd->driver->pci_resume(hcd);
 410                 if (retval) {
 411                         dev_err(hcd->self.controller,
 412                                 "PCI post-resume error %d!\n", retval);
 413                         usb_hc_died(hcd);
 414                 }
 415         }
 416
 417         return retval;
 418 }
 419 EXPORT_SYMBOL_GPL(usb_hcd_pci_resume);
 420
 421 #endif  /* CONFIG_PM */
 422
 423 /**
 424  * usb_hcd_pci_shutdown - shutdown host controller
 425  * @dev: USB Host Controller being shutdown
 426  */
 427 void usb_hcd_pci_shutdown(struct pci_dev *dev)
 428 {
 429         struct usb_hcd          *hcd;
 430
 431         hcd = pci_get_drvdata(dev);
 432         if (!hcd)
 433                 return;
 434
 435         if (hcd->driver->shutdown)
 436                 hcd->driver->shutdown(hcd);
 437 }
 438 EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
 439