2 * QLogic qlge NIC HBA Driver
3 * Copyright (c) 2003-2008 QLogic Corporation
4 * See LICENSE.qlge for copyright and licensing details.
5 * Author: Linux qlge network device driver by
6 * Ron Mercer <ron.mercer@qlogic.com>
8 #include <linux/kernel.h>
9 #include <linux/init.h>
10 #include <linux/types.h>
11 #include <linux/module.h>
12 #include <linux/list.h>
13 #include <linux/pci.h>
14 #include <linux/dma-mapping.h>
15 #include <linux/pagemap.h>
16 #include <linux/sched.h>
17 #include <linux/slab.h>
18 #include <linux/dmapool.h>
19 #include <linux/mempool.h>
20 #include <linux/spinlock.h>
21 #include <linux/kthread.h>
22 #include <linux/interrupt.h>
23 #include <linux/errno.h>
24 #include <linux/ioport.h>
27 #include <linux/ipv6.h>
29 #include <linux/tcp.h>
30 #include <linux/udp.h>
31 #include <linux/if_arp.h>
32 #include <linux/if_ether.h>
33 #include <linux/netdevice.h>
34 #include <linux/etherdevice.h>
35 #include <linux/ethtool.h>
36 #include <linux/skbuff.h>
37 #include <linux/rtnetlink.h>
38 #include <linux/if_vlan.h>
39 #include <linux/delay.h>
41 #include <linux/vmalloc.h>
42 #include <net/ip6_checksum.h>
46 char qlge_driver_name[] = DRV_NAME;
47 const char qlge_driver_version[] = DRV_VERSION;
49 MODULE_AUTHOR("Ron Mercer <ron.mercer@qlogic.com>");
50 MODULE_DESCRIPTION(DRV_STRING " ");
51 MODULE_LICENSE("GPL");
52 MODULE_VERSION(DRV_VERSION);
54 static const u32 default_msg =
55 NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK |
56 /* NETIF_MSG_TIMER | */
61 /* NETIF_MSG_TX_QUEUED | */
62 /* NETIF_MSG_INTR | NETIF_MSG_TX_DONE | NETIF_MSG_RX_STATUS | */
63 /* NETIF_MSG_PKTDATA | */
64 NETIF_MSG_HW | NETIF_MSG_WOL | 0;
66 static int debug = 0x00007fff; /* defaults above */
67 module_param(debug, int, 0);
68 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
73 static int irq_type = MSIX_IRQ;
74 module_param(irq_type, int, MSIX_IRQ);
75 MODULE_PARM_DESC(irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy.");
77 static struct pci_device_id qlge_pci_tbl[] __devinitdata = {
78 {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8012)},
79 {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8000)},
80 /* required last entry */
84 MODULE_DEVICE_TABLE(pci, qlge_pci_tbl);
86 /* This hardware semaphore causes exclusive access to
87 * resources shared between the NIC driver, MPI firmware,
88 * FCOE firmware and the FC driver.
90 static int ql_sem_trylock(struct ql_adapter *qdev, u32 sem_mask)
96 sem_bits = SEM_SET << SEM_XGMAC0_SHIFT;
99 sem_bits = SEM_SET << SEM_XGMAC1_SHIFT;
102 sem_bits = SEM_SET << SEM_ICB_SHIFT;
104 case SEM_MAC_ADDR_MASK:
105 sem_bits = SEM_SET << SEM_MAC_ADDR_SHIFT;
108 sem_bits = SEM_SET << SEM_FLASH_SHIFT;
111 sem_bits = SEM_SET << SEM_PROBE_SHIFT;
113 case SEM_RT_IDX_MASK:
114 sem_bits = SEM_SET << SEM_RT_IDX_SHIFT;
116 case SEM_PROC_REG_MASK:
117 sem_bits = SEM_SET << SEM_PROC_REG_SHIFT;
120 QPRINTK(qdev, PROBE, ALERT, "Bad Semaphore mask!.\n");
124 ql_write32(qdev, SEM, sem_bits | sem_mask);
125 return !(ql_read32(qdev, SEM) & sem_bits);
128 int ql_sem_spinlock(struct ql_adapter *qdev, u32 sem_mask)
130 unsigned int wait_count = 30;
132 if (!ql_sem_trylock(qdev, sem_mask))
135 } while (--wait_count);
139 void ql_sem_unlock(struct ql_adapter *qdev, u32 sem_mask)
141 ql_write32(qdev, SEM, sem_mask);
142 ql_read32(qdev, SEM); /* flush */
145 /* This function waits for a specific bit to come ready
146 * in a given register. It is used mostly by the initialize
147 * process, but is also used in kernel thread API such as
148 * netdev->set_multi, netdev->set_mac_address, netdev->vlan_rx_add_vid.
150 int ql_wait_reg_rdy(struct ql_adapter *qdev, u32 reg, u32 bit, u32 err_bit)
153 int count = UDELAY_COUNT;
156 temp = ql_read32(qdev, reg);
158 /* check for errors */
159 if (temp & err_bit) {
160 QPRINTK(qdev, PROBE, ALERT,
161 "register 0x%.08x access error, value = 0x%.08x!.\n",
164 } else if (temp & bit)
166 udelay(UDELAY_DELAY);
169 QPRINTK(qdev, PROBE, ALERT,
170 "Timed out waiting for reg %x to come ready.\n", reg);
174 /* The CFG register is used to download TX and RX control blocks
175 * to the chip. This function waits for an operation to complete.
177 static int ql_wait_cfg(struct ql_adapter *qdev, u32 bit)
179 int count = UDELAY_COUNT;
183 temp = ql_read32(qdev, CFG);
188 udelay(UDELAY_DELAY);
195 /* Used to issue init control blocks to hw. Maps control block,
196 * sets address, triggers download, waits for completion.
198 int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit,
208 (bit & (CFG_LRQ | CFG_LR | CFG_LCQ)) ? PCI_DMA_TODEVICE :
211 map = pci_map_single(qdev->pdev, ptr, size, direction);
212 if (pci_dma_mapping_error(qdev->pdev, map)) {
213 QPRINTK(qdev, IFUP, ERR, "Couldn't map DMA area.\n");
217 status = ql_wait_cfg(qdev, bit);
219 QPRINTK(qdev, IFUP, ERR,
220 "Timed out waiting for CFG to come ready.\n");
224 status = ql_sem_spinlock(qdev, SEM_ICB_MASK);
227 ql_write32(qdev, ICB_L, (u32) map);
228 ql_write32(qdev, ICB_H, (u32) (map >> 32));
229 ql_sem_unlock(qdev, SEM_ICB_MASK); /* does flush too */
231 mask = CFG_Q_MASK | (bit << 16);
232 value = bit | (q_id << CFG_Q_SHIFT);
233 ql_write32(qdev, CFG, (mask | value));
236 * Wait for the bit to clear after signaling hw.
238 status = ql_wait_cfg(qdev, bit);
240 pci_unmap_single(qdev->pdev, map, size, direction);
244 /* Get a specific MAC address from the CAM. Used for debug and reg dump. */
245 int ql_get_mac_addr_reg(struct ql_adapter *qdev, u32 type, u16 index,
252 case MAC_ADDR_TYPE_MULTI_MAC:
253 case MAC_ADDR_TYPE_CAM_MAC:
256 ql_wait_reg_rdy(qdev,
257 MAC_ADDR_IDX, MAC_ADDR_MW, 0);
260 ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */
261 (index << MAC_ADDR_IDX_SHIFT) | /* index */
262 MAC_ADDR_ADR | MAC_ADDR_RS | type); /* type */
264 ql_wait_reg_rdy(qdev,
265 MAC_ADDR_IDX, MAC_ADDR_MR, 0);
268 *value++ = ql_read32(qdev, MAC_ADDR_DATA);
270 ql_wait_reg_rdy(qdev,
271 MAC_ADDR_IDX, MAC_ADDR_MW, 0);
274 ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */
275 (index << MAC_ADDR_IDX_SHIFT) | /* index */
276 MAC_ADDR_ADR | MAC_ADDR_RS | type); /* type */
278 ql_wait_reg_rdy(qdev,
279 MAC_ADDR_IDX, MAC_ADDR_MR, 0);
282 *value++ = ql_read32(qdev, MAC_ADDR_DATA);
283 if (type == MAC_ADDR_TYPE_CAM_MAC) {
285 ql_wait_reg_rdy(qdev,
286 MAC_ADDR_IDX, MAC_ADDR_MW, 0);
289 ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */
290 (index << MAC_ADDR_IDX_SHIFT) | /* index */
291 MAC_ADDR_ADR | MAC_ADDR_RS | type); /* type */
293 ql_wait_reg_rdy(qdev, MAC_ADDR_IDX,
297 *value++ = ql_read32(qdev, MAC_ADDR_DATA);
301 case MAC_ADDR_TYPE_VLAN:
302 case MAC_ADDR_TYPE_MULTI_FLTR:
304 QPRINTK(qdev, IFUP, CRIT,
305 "Address type %d not yet supported.\n", type);
312 /* Set up a MAC, multicast or VLAN address for the
313 * inbound frame matching.
315 static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type,
322 case MAC_ADDR_TYPE_MULTI_MAC:
323 case MAC_ADDR_TYPE_CAM_MAC:
326 u32 upper = (addr[0] << 8) | addr[1];
328 (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) |
331 QPRINTK(qdev, IFUP, DEBUG,
332 "Adding %s address %pM"
333 " at index %d in the CAM.\n",
335 MAC_ADDR_TYPE_MULTI_MAC) ? "MULTICAST" :
336 "UNICAST"), addr, index);
339 ql_wait_reg_rdy(qdev,
340 MAC_ADDR_IDX, MAC_ADDR_MW, 0);
343 ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */
344 (index << MAC_ADDR_IDX_SHIFT) | /* index */
346 ql_write32(qdev, MAC_ADDR_DATA, lower);
348 ql_wait_reg_rdy(qdev,
349 MAC_ADDR_IDX, MAC_ADDR_MW, 0);
352 ql_write32(qdev, MAC_ADDR_IDX, (offset++) | /* offset */
353 (index << MAC_ADDR_IDX_SHIFT) | /* index */
355 ql_write32(qdev, MAC_ADDR_DATA, upper);
357 ql_wait_reg_rdy(qdev,
358 MAC_ADDR_IDX, MAC_ADDR_MW, 0);
361 ql_write32(qdev, MAC_ADDR_IDX, (offset) | /* offset */
362 (index << MAC_ADDR_IDX_SHIFT) | /* index */
364 /* This field should also include the queue id
365 and possibly the function id. Right now we hardcode
366 the route field to NIC core.
368 if (type == MAC_ADDR_TYPE_CAM_MAC) {
369 cam_output = (CAM_OUT_ROUTE_NIC |
371 func << CAM_OUT_FUNC_SHIFT) |
373 rss_ring_first_cq_id <<
374 CAM_OUT_CQ_ID_SHIFT));
376 cam_output |= CAM_OUT_RV;
377 /* route to NIC core */
378 ql_write32(qdev, MAC_ADDR_DATA, cam_output);
382 case MAC_ADDR_TYPE_VLAN:
384 u32 enable_bit = *((u32 *) &addr[0]);
385 /* For VLAN, the addr actually holds a bit that
386 * either enables or disables the vlan id we are
387 * addressing. It's either MAC_ADDR_E on or off.
388 * That's bit-27 we're talking about.
390 QPRINTK(qdev, IFUP, INFO, "%s VLAN ID %d %s the CAM.\n",
391 (enable_bit ? "Adding" : "Removing"),
392 index, (enable_bit ? "to" : "from"));
395 ql_wait_reg_rdy(qdev,
396 MAC_ADDR_IDX, MAC_ADDR_MW, 0);
399 ql_write32(qdev, MAC_ADDR_IDX, offset | /* offset */
400 (index << MAC_ADDR_IDX_SHIFT) | /* index */
402 enable_bit); /* enable/disable */
405 case MAC_ADDR_TYPE_MULTI_FLTR:
407 QPRINTK(qdev, IFUP, CRIT,
408 "Address type %d not yet supported.\n", type);
415 /* Get a specific frame routing value from the CAM.
416 * Used for debug and reg dump.
418 int ql_get_routing_reg(struct ql_adapter *qdev, u32 index, u32 *value)
422 status = ql_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MW, 0);
426 ql_write32(qdev, RT_IDX,
427 RT_IDX_TYPE_NICQ | RT_IDX_RS | (index << RT_IDX_IDX_SHIFT));
428 status = ql_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MR, 0);
431 *value = ql_read32(qdev, RT_DATA);
436 /* The NIC function for this chip has 16 routing indexes. Each one can be used
437 * to route different frame types to various inbound queues. We send broadcast/
438 * multicast/error frames to the default queue for slow handling,
439 * and CAM hit/RSS frames to the fast handling queues.
441 static int ql_set_routing_reg(struct ql_adapter *qdev, u32 index, u32 mask,
444 int status = -EINVAL; /* Return error if no mask match. */
447 QPRINTK(qdev, IFUP, DEBUG,
448 "%s %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s mask %s the routing reg.\n",
449 (enable ? "Adding" : "Removing"),
450 ((index == RT_IDX_ALL_ERR_SLOT) ? "MAC ERROR/ALL ERROR" : ""),
451 ((index == RT_IDX_IP_CSUM_ERR_SLOT) ? "IP CSUM ERROR" : ""),
453 RT_IDX_TCP_UDP_CSUM_ERR_SLOT) ? "TCP/UDP CSUM ERROR" : ""),
454 ((index == RT_IDX_BCAST_SLOT) ? "BROADCAST" : ""),
455 ((index == RT_IDX_MCAST_MATCH_SLOT) ? "MULTICAST MATCH" : ""),
456 ((index == RT_IDX_ALLMULTI_SLOT) ? "ALL MULTICAST MATCH" : ""),
457 ((index == RT_IDX_UNUSED6_SLOT) ? "UNUSED6" : ""),
458 ((index == RT_IDX_UNUSED7_SLOT) ? "UNUSED7" : ""),
459 ((index == RT_IDX_RSS_MATCH_SLOT) ? "RSS ALL/IPV4 MATCH" : ""),
460 ((index == RT_IDX_RSS_IPV6_SLOT) ? "RSS IPV6" : ""),
461 ((index == RT_IDX_RSS_TCP4_SLOT) ? "RSS TCP4" : ""),
462 ((index == RT_IDX_RSS_TCP6_SLOT) ? "RSS TCP6" : ""),
463 ((index == RT_IDX_CAM_HIT_SLOT) ? "CAM HIT" : ""),
464 ((index == RT_IDX_UNUSED013) ? "UNUSED13" : ""),
465 ((index == RT_IDX_UNUSED014) ? "UNUSED14" : ""),
466 ((index == RT_IDX_PROMISCUOUS_SLOT) ? "PROMISCUOUS" : ""),
467 (enable ? "to" : "from"));
472 value = RT_IDX_DST_CAM_Q | /* dest */
473 RT_IDX_TYPE_NICQ | /* type */
474 (RT_IDX_CAM_HIT_SLOT << RT_IDX_IDX_SHIFT);/* index */
477 case RT_IDX_VALID: /* Promiscuous Mode frames. */
479 value = RT_IDX_DST_DFLT_Q | /* dest */
480 RT_IDX_TYPE_NICQ | /* type */
481 (RT_IDX_PROMISCUOUS_SLOT << RT_IDX_IDX_SHIFT);/* index */
484 case RT_IDX_ERR: /* Pass up MAC,IP,TCP/UDP error frames. */
486 value = RT_IDX_DST_DFLT_Q | /* dest */
487 RT_IDX_TYPE_NICQ | /* type */
488 (RT_IDX_ALL_ERR_SLOT << RT_IDX_IDX_SHIFT);/* index */
491 case RT_IDX_BCAST: /* Pass up Broadcast frames to default Q. */
493 value = RT_IDX_DST_DFLT_Q | /* dest */
494 RT_IDX_TYPE_NICQ | /* type */
495 (RT_IDX_BCAST_SLOT << RT_IDX_IDX_SHIFT);/* index */
498 case RT_IDX_MCAST: /* Pass up All Multicast frames. */
500 value = RT_IDX_DST_CAM_Q | /* dest */
501 RT_IDX_TYPE_NICQ | /* type */
502 (RT_IDX_ALLMULTI_SLOT << RT_IDX_IDX_SHIFT);/* index */
505 case RT_IDX_MCAST_MATCH: /* Pass up matched Multicast frames. */
507 value = RT_IDX_DST_CAM_Q | /* dest */
508 RT_IDX_TYPE_NICQ | /* type */
509 (RT_IDX_MCAST_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */
512 case RT_IDX_RSS_MATCH: /* Pass up matched RSS frames. */
514 value = RT_IDX_DST_RSS | /* dest */
515 RT_IDX_TYPE_NICQ | /* type */
516 (RT_IDX_RSS_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */
519 case 0: /* Clear the E-bit on an entry. */
521 value = RT_IDX_DST_DFLT_Q | /* dest */
522 RT_IDX_TYPE_NICQ | /* type */
523 (index << RT_IDX_IDX_SHIFT);/* index */
527 QPRINTK(qdev, IFUP, ERR, "Mask type %d not yet supported.\n",
534 status = ql_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MW, 0);
537 value |= (enable ? RT_IDX_E : 0);
538 ql_write32(qdev, RT_IDX, value);
539 ql_write32(qdev, RT_DATA, enable ? mask : 0);
545 static void ql_enable_interrupts(struct ql_adapter *qdev)
547 ql_write32(qdev, INTR_EN, (INTR_EN_EI << 16) | INTR_EN_EI);
550 static void ql_disable_interrupts(struct ql_adapter *qdev)
552 ql_write32(qdev, INTR_EN, (INTR_EN_EI << 16));
555 /* If we're running with multiple MSI-X vectors then we enable on the fly.
556 * Otherwise, we may have multiple outstanding workers and don't want to
557 * enable until the last one finishes. In this case, the irq_cnt gets
558 * incremented everytime we queue a worker and decremented everytime
559 * a worker finishes. Once it hits zero we enable the interrupt.
561 u32 ql_enable_completion_interrupt(struct ql_adapter *qdev, u32 intr)
564 unsigned long hw_flags = 0;
565 struct intr_context *ctx = qdev->intr_context + intr;
567 if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags) && intr)) {
568 /* Always enable if we're MSIX multi interrupts and
569 * it's not the default (zeroeth) interrupt.
571 ql_write32(qdev, INTR_EN,
573 var = ql_read32(qdev, STS);
577 spin_lock_irqsave(&qdev->hw_lock, hw_flags);
578 if (atomic_dec_and_test(&ctx->irq_cnt)) {
579 ql_write32(qdev, INTR_EN,
581 var = ql_read32(qdev, STS);
583 spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
587 static u32 ql_disable_completion_interrupt(struct ql_adapter *qdev, u32 intr)
590 struct intr_context *ctx;
592 /* HW disables for us if we're MSIX multi interrupts and
593 * it's not the default (zeroeth) interrupt.
595 if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags) && intr))
598 ctx = qdev->intr_context + intr;
599 spin_lock(&qdev->hw_lock);
600 if (!atomic_read(&ctx->irq_cnt)) {
601 ql_write32(qdev, INTR_EN,
603 var = ql_read32(qdev, STS);
605 atomic_inc(&ctx->irq_cnt);
606 spin_unlock(&qdev->hw_lock);
610 static void ql_enable_all_completion_interrupts(struct ql_adapter *qdev)
613 for (i = 0; i < qdev->intr_count; i++) {
614 /* The enable call does a atomic_dec_and_test
615 * and enables only if the result is zero.
616 * So we precharge it here.
618 if (unlikely(!test_bit(QL_MSIX_ENABLED, &qdev->flags) ||
620 atomic_set(&qdev->intr_context[i].irq_cnt, 1);
621 ql_enable_completion_interrupt(qdev, i);
626 static int ql_validate_flash(struct ql_adapter *qdev, u32 size, const char *str)
630 __le16 *flash = (__le16 *)&qdev->flash;
632 status = strncmp((char *)&qdev->flash, str, 4);
634 QPRINTK(qdev, IFUP, ERR, "Invalid flash signature.\n");
638 for (i = 0; i < size; i++)
639 csum += le16_to_cpu(*flash++);
642 QPRINTK(qdev, IFUP, ERR,
643 "Invalid flash checksum, csum = 0x%.04x.\n", csum);
648 static int ql_read_flash_word(struct ql_adapter *qdev, int offset, __le32 *data)
651 /* wait for reg to come ready */
652 status = ql_wait_reg_rdy(qdev,
653 FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR);
656 /* set up for reg read */
657 ql_write32(qdev, FLASH_ADDR, FLASH_ADDR_R | offset);
658 /* wait for reg to come ready */
659 status = ql_wait_reg_rdy(qdev,
660 FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR);
663 /* This data is stored on flash as an array of
664 * __le32. Since ql_read32() returns cpu endian
665 * we need to swap it back.
667 *data = cpu_to_le32(ql_read32(qdev, FLASH_DATA));
672 static int ql_get_8000_flash_params(struct ql_adapter *qdev)
676 __le32 *p = (__le32 *)&qdev->flash;
680 /* Get flash offset for function and adjust
684 offset = FUNC0_FLASH_OFFSET / sizeof(u32);
686 offset = FUNC1_FLASH_OFFSET / sizeof(u32);
688 if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
691 size = sizeof(struct flash_params_8000) / sizeof(u32);
692 for (i = 0; i < size; i++, p++) {
693 status = ql_read_flash_word(qdev, i+offset, p);
695 QPRINTK(qdev, IFUP, ERR, "Error reading flash.\n");
700 status = ql_validate_flash(qdev,
701 sizeof(struct flash_params_8000) / sizeof(u16),
704 QPRINTK(qdev, IFUP, ERR, "Invalid flash.\n");
709 /* Extract either manufacturer or BOFM modified
712 if (qdev->flash.flash_params_8000.data_type1 == 2)
714 qdev->flash.flash_params_8000.mac_addr1,
715 qdev->ndev->addr_len);
718 qdev->flash.flash_params_8000.mac_addr,
719 qdev->ndev->addr_len);
721 if (!is_valid_ether_addr(mac_addr)) {
722 QPRINTK(qdev, IFUP, ERR, "Invalid MAC address.\n");
727 memcpy(qdev->ndev->dev_addr,
729 qdev->ndev->addr_len);
732 ql_sem_unlock(qdev, SEM_FLASH_MASK);
736 static int ql_get_8012_flash_params(struct ql_adapter *qdev)
740 __le32 *p = (__le32 *)&qdev->flash;
742 u32 size = sizeof(struct flash_params_8012) / sizeof(u32);
744 /* Second function's parameters follow the first
750 if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
753 for (i = 0; i < size; i++, p++) {
754 status = ql_read_flash_word(qdev, i+offset, p);
756 QPRINTK(qdev, IFUP, ERR, "Error reading flash.\n");
762 status = ql_validate_flash(qdev,
763 sizeof(struct flash_params_8012) / sizeof(u16),
766 QPRINTK(qdev, IFUP, ERR, "Invalid flash.\n");
771 if (!is_valid_ether_addr(qdev->flash.flash_params_8012.mac_addr)) {
776 memcpy(qdev->ndev->dev_addr,
777 qdev->flash.flash_params_8012.mac_addr,
778 qdev->ndev->addr_len);
781 ql_sem_unlock(qdev, SEM_FLASH_MASK);
785 /* xgmac register are located behind the xgmac_addr and xgmac_data
786 * register pair. Each read/write requires us to wait for the ready
787 * bit before reading/writing the data.
789 static int ql_write_xgmac_reg(struct ql_adapter *qdev, u32 reg, u32 data)
792 /* wait for reg to come ready */
793 status = ql_wait_reg_rdy(qdev,
794 XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
797 /* write the data to the data reg */
798 ql_write32(qdev, XGMAC_DATA, data);
799 /* trigger the write */
800 ql_write32(qdev, XGMAC_ADDR, reg);
804 /* xgmac register are located behind the xgmac_addr and xgmac_data
805 * register pair. Each read/write requires us to wait for the ready
806 * bit before reading/writing the data.
808 int ql_read_xgmac_reg(struct ql_adapter *qdev, u32 reg, u32 *data)
811 /* wait for reg to come ready */
812 status = ql_wait_reg_rdy(qdev,
813 XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
816 /* set up for reg read */
817 ql_write32(qdev, XGMAC_ADDR, reg | XGMAC_ADDR_R);
818 /* wait for reg to come ready */
819 status = ql_wait_reg_rdy(qdev,
820 XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
824 *data = ql_read32(qdev, XGMAC_DATA);
829 /* This is used for reading the 64-bit statistics regs. */
830 int ql_read_xgmac_reg64(struct ql_adapter *qdev, u32 reg, u64 *data)
836 status = ql_read_xgmac_reg(qdev, reg, &lo);
840 status = ql_read_xgmac_reg(qdev, reg + 4, &hi);
844 *data = (u64) lo | ((u64) hi << 32);
850 static int ql_8000_port_initialize(struct ql_adapter *qdev)
854 * Get MPI firmware version for driver banner
857 status = ql_mb_about_fw(qdev);
860 status = ql_mb_get_fw_state(qdev);
863 /* Wake up a worker to get/set the TX/RX frame sizes. */
864 queue_delayed_work(qdev->workqueue, &qdev->mpi_port_cfg_work, 0);
869 /* Take the MAC Core out of reset.
870 * Enable statistics counting.
871 * Take the transmitter/receiver out of reset.
872 * This functionality may be done in the MPI firmware at a
875 static int ql_8012_port_initialize(struct ql_adapter *qdev)
880 if (ql_sem_trylock(qdev, qdev->xg_sem_mask)) {
881 /* Another function has the semaphore, so
882 * wait for the port init bit to come ready.
884 QPRINTK(qdev, LINK, INFO,
885 "Another function has the semaphore, so wait for the port init bit to come ready.\n");
886 status = ql_wait_reg_rdy(qdev, STS, qdev->port_init, 0);
888 QPRINTK(qdev, LINK, CRIT,
889 "Port initialize timed out.\n");
894 QPRINTK(qdev, LINK, INFO, "Got xgmac semaphore!.\n");
895 /* Set the core reset. */
896 status = ql_read_xgmac_reg(qdev, GLOBAL_CFG, &data);
899 data |= GLOBAL_CFG_RESET;
900 status = ql_write_xgmac_reg(qdev, GLOBAL_CFG, data);
904 /* Clear the core reset and turn on jumbo for receiver. */
905 data &= ~GLOBAL_CFG_RESET; /* Clear core reset. */
906 data |= GLOBAL_CFG_JUMBO; /* Turn on jumbo. */
907 data |= GLOBAL_CFG_TX_STAT_EN;
908 data |= GLOBAL_CFG_RX_STAT_EN;
909 status = ql_write_xgmac_reg(qdev, GLOBAL_CFG, data);
913 /* Enable transmitter, and clear it's reset. */
914 status = ql_read_xgmac_reg(qdev, TX_CFG, &data);
917 data &= ~TX_CFG_RESET; /* Clear the TX MAC reset. */
918 data |= TX_CFG_EN; /* Enable the transmitter. */
919 status = ql_write_xgmac_reg(qdev, TX_CFG, data);
923 /* Enable receiver and clear it's reset. */
924 status = ql_read_xgmac_reg(qdev, RX_CFG, &data);
927 data &= ~RX_CFG_RESET; /* Clear the RX MAC reset. */
928 data |= RX_CFG_EN; /* Enable the receiver. */
929 status = ql_write_xgmac_reg(qdev, RX_CFG, data);
935 ql_write_xgmac_reg(qdev, MAC_TX_PARAMS, MAC_TX_PARAMS_JUMBO | (0x2580 << 16));
939 ql_write_xgmac_reg(qdev, MAC_RX_PARAMS, 0x2580);
943 /* Signal to the world that the port is enabled. */
944 ql_write32(qdev, STS, ((qdev->port_init << 16) | qdev->port_init));
946 ql_sem_unlock(qdev, qdev->xg_sem_mask);
950 /* Get the next large buffer. */
951 static struct bq_desc *ql_get_curr_lbuf(struct rx_ring *rx_ring)
953 struct bq_desc *lbq_desc = &rx_ring->lbq[rx_ring->lbq_curr_idx];
954 rx_ring->lbq_curr_idx++;
955 if (rx_ring->lbq_curr_idx == rx_ring->lbq_len)
956 rx_ring->lbq_curr_idx = 0;
957 rx_ring->lbq_free_cnt++;
961 /* Get the next small buffer. */
962 static struct bq_desc *ql_get_curr_sbuf(struct rx_ring *rx_ring)
964 struct bq_desc *sbq_desc = &rx_ring->sbq[rx_ring->sbq_curr_idx];
965 rx_ring->sbq_curr_idx++;
966 if (rx_ring->sbq_curr_idx == rx_ring->sbq_len)
967 rx_ring->sbq_curr_idx = 0;
968 rx_ring->sbq_free_cnt++;
972 /* Update an rx ring index. */
973 static void ql_update_cq(struct rx_ring *rx_ring)
975 rx_ring->cnsmr_idx++;
976 rx_ring->curr_entry++;
977 if (unlikely(rx_ring->cnsmr_idx == rx_ring->cq_len)) {
978 rx_ring->cnsmr_idx = 0;
979 rx_ring->curr_entry = rx_ring->cq_base;
983 static void ql_write_cq_idx(struct rx_ring *rx_ring)
985 ql_write_db_reg(rx_ring->cnsmr_idx, rx_ring->cnsmr_idx_db_reg);
988 /* Process (refill) a large buffer queue. */
989 static void ql_update_lbq(struct ql_adapter *qdev, struct rx_ring *rx_ring)
991 u32 clean_idx = rx_ring->lbq_clean_idx;
992 u32 start_idx = clean_idx;
993 struct bq_desc *lbq_desc;
997 while (rx_ring->lbq_free_cnt > 16) {
998 for (i = 0; i < 16; i++) {
999 QPRINTK(qdev, RX_STATUS, DEBUG,
1000 "lbq: try cleaning clean_idx = %d.\n",
1002 lbq_desc = &rx_ring->lbq[clean_idx];
1003 if (lbq_desc->p.lbq_page == NULL) {
1004 QPRINTK(qdev, RX_STATUS, DEBUG,
1005 "lbq: getting new page for index %d.\n",
1007 lbq_desc->p.lbq_page = alloc_page(GFP_ATOMIC);
1008 if (lbq_desc->p.lbq_page == NULL) {
1009 rx_ring->lbq_clean_idx = clean_idx;
1010 QPRINTK(qdev, RX_STATUS, ERR,
1011 "Couldn't get a page.\n");
1014 map = pci_map_page(qdev->pdev,
1015 lbq_desc->p.lbq_page,
1017 PCI_DMA_FROMDEVICE);
1018 if (pci_dma_mapping_error(qdev->pdev, map)) {
1019 rx_ring->lbq_clean_idx = clean_idx;
1020 put_page(lbq_desc->p.lbq_page);
1021 lbq_desc->p.lbq_page = NULL;
1022 QPRINTK(qdev, RX_STATUS, ERR,
1023 "PCI mapping failed.\n");
1026 pci_unmap_addr_set(lbq_desc, mapaddr, map);
1027 pci_unmap_len_set(lbq_desc, maplen, PAGE_SIZE);
1028 *lbq_desc->addr = cpu_to_le64(map);
1031 if (clean_idx == rx_ring->lbq_len)
1035 rx_ring->lbq_clean_idx = clean_idx;
1036 rx_ring->lbq_prod_idx += 16;
1037 if (rx_ring->lbq_prod_idx == rx_ring->lbq_len)
1038 rx_ring->lbq_prod_idx = 0;
1039 rx_ring->lbq_free_cnt -= 16;
1042 if (start_idx != clean_idx) {
1043 QPRINTK(qdev, RX_STATUS, DEBUG,
1044 "lbq: updating prod idx = %d.\n",
1045 rx_ring->lbq_prod_idx);
1046 ql_write_db_reg(rx_ring->lbq_prod_idx,
1047 rx_ring->lbq_prod_idx_db_reg);
1051 /* Process (refill) a small buffer queue. */
1052 static void ql_update_sbq(struct ql_adapter *qdev, struct rx_ring *rx_ring)
1054 u32 clean_idx = rx_ring->sbq_clean_idx;
1055 u32 start_idx = clean_idx;
1056 struct bq_desc *sbq_desc;
1060 while (rx_ring->sbq_free_cnt > 16) {
1061 for (i = 0; i < 16; i++) {
1062 sbq_desc = &rx_ring->sbq[clean_idx];
1063 QPRINTK(qdev, RX_STATUS, DEBUG,
1064 "sbq: try cleaning clean_idx = %d.\n",
1066 if (sbq_desc->p.skb == NULL) {
1067 QPRINTK(qdev, RX_STATUS, DEBUG,
1068 "sbq: getting new skb for index %d.\n",
1071 netdev_alloc_skb(qdev->ndev,
1072 rx_ring->sbq_buf_size);
1073 if (sbq_desc->p.skb == NULL) {
1074 QPRINTK(qdev, PROBE, ERR,
1075 "Couldn't get an skb.\n");
1076 rx_ring->sbq_clean_idx = clean_idx;
1079 skb_reserve(sbq_desc->p.skb, QLGE_SB_PAD);
1080 map = pci_map_single(qdev->pdev,
1081 sbq_desc->p.skb->data,
1082 rx_ring->sbq_buf_size /
1083 2, PCI_DMA_FROMDEVICE);
1084 if (pci_dma_mapping_error(qdev->pdev, map)) {
1085 QPRINTK(qdev, IFUP, ERR, "PCI mapping failed.\n");
1086 rx_ring->sbq_clean_idx = clean_idx;
1087 dev_kfree_skb_any(sbq_desc->p.skb);
1088 sbq_desc->p.skb = NULL;
1091 pci_unmap_addr_set(sbq_desc, mapaddr, map);
1092 pci_unmap_len_set(sbq_desc, maplen,
1093 rx_ring->sbq_buf_size / 2);
1094 *sbq_desc->addr = cpu_to_le64(map);
1098 if (clean_idx == rx_ring->sbq_len)
1101 rx_ring->sbq_clean_idx = clean_idx;
1102 rx_ring->sbq_prod_idx += 16;
1103 if (rx_ring->sbq_prod_idx == rx_ring->sbq_len)
1104 rx_ring->sbq_prod_idx = 0;
1105 rx_ring->sbq_free_cnt -= 16;
1108 if (start_idx != clean_idx) {
1109 QPRINTK(qdev, RX_STATUS, DEBUG,
1110 "sbq: updating prod idx = %d.\n",
1111 rx_ring->sbq_prod_idx);
1112 ql_write_db_reg(rx_ring->sbq_prod_idx,
1113 rx_ring->sbq_prod_idx_db_reg);
1117 static void ql_update_buffer_queues(struct ql_adapter *qdev,
1118 struct rx_ring *rx_ring)
1120 ql_update_sbq(qdev, rx_ring);
1121 ql_update_lbq(qdev, rx_ring);
1124 /* Unmaps tx buffers. Can be called from send() if a pci mapping
1125 * fails at some stage, or from the interrupt when a tx completes.
1127 static void ql_unmap_send(struct ql_adapter *qdev,
1128 struct tx_ring_desc *tx_ring_desc, int mapped)
1131 for (i = 0; i < mapped; i++) {
1132 if (i == 0 || (i == 7 && mapped > 7)) {
1134 * Unmap the skb->data area, or the
1135 * external sglist (AKA the Outbound
1136 * Address List (OAL)).
1137 * If its the zeroeth element, then it's
1138 * the skb->data area. If it's the 7th
1139 * element and there is more than 6 frags,
1143 QPRINTK(qdev, TX_DONE, DEBUG,
1144 "unmapping OAL area.\n");
1146 pci_unmap_single(qdev->pdev,
1147 pci_unmap_addr(&tx_ring_desc->map[i],
1149 pci_unmap_len(&tx_ring_desc->map[i],
1153 QPRINTK(qdev, TX_DONE, DEBUG, "unmapping frag %d.\n",
1155 pci_unmap_page(qdev->pdev,
1156 pci_unmap_addr(&tx_ring_desc->map[i],
1158 pci_unmap_len(&tx_ring_desc->map[i],
1159 maplen), PCI_DMA_TODEVICE);
1165 /* Map the buffers for this transmit. This will return
1166 * NETDEV_TX_BUSY or NETDEV_TX_OK based on success.
1168 static int ql_map_send(struct ql_adapter *qdev,
1169 struct ob_mac_iocb_req *mac_iocb_ptr,
1170 struct sk_buff *skb, struct tx_ring_desc *tx_ring_desc)
1172 int len = skb_headlen(skb);
1174 int frag_idx, err, map_idx = 0;
1175 struct tx_buf_desc *tbd = mac_iocb_ptr->tbd;
1176 int frag_cnt = skb_shinfo(skb)->nr_frags;
1179 QPRINTK(qdev, TX_QUEUED, DEBUG, "frag_cnt = %d.\n", frag_cnt);
1182 * Map the skb buffer first.
1184 map = pci_map_single(qdev->pdev, skb->data, len, PCI_DMA_TODEVICE);
1186 err = pci_dma_mapping_error(qdev->pdev, map);
1188 QPRINTK(qdev, TX_QUEUED, ERR,
1189 "PCI mapping failed with error: %d\n", err);
1191 return NETDEV_TX_BUSY;
1194 tbd->len = cpu_to_le32(len);
1195 tbd->addr = cpu_to_le64(map);
1196 pci_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr, map);
1197 pci_unmap_len_set(&tx_ring_desc->map[map_idx], maplen, len);
1201 * This loop fills the remainder of the 8 address descriptors
1202 * in the IOCB. If there are more than 7 fragments, then the
1203 * eighth address desc will point to an external list (OAL).
1204 * When this happens, the remainder of the frags will be stored
1207 for (frag_idx = 0; frag_idx < frag_cnt; frag_idx++, map_idx++) {
1208 skb_frag_t *frag = &skb_shinfo(skb)->frags[frag_idx];
1210 if (frag_idx == 6 && frag_cnt > 7) {
1211 /* Let's tack on an sglist.
1212 * Our control block will now
1214 * iocb->seg[0] = skb->data
1215 * iocb->seg[1] = frag[0]
1216 * iocb->seg[2] = frag[1]
1217 * iocb->seg[3] = frag[2]
1218 * iocb->seg[4] = frag[3]
1219 * iocb->seg[5] = frag[4]
1220 * iocb->seg[6] = frag[5]
1221 * iocb->seg[7] = ptr to OAL (external sglist)
1222 * oal->seg[0] = frag[6]
1223 * oal->seg[1] = frag[7]
1224 * oal->seg[2] = frag[8]
1225 * oal->seg[3] = frag[9]
1226 * oal->seg[4] = frag[10]
1229 /* Tack on the OAL in the eighth segment of IOCB. */
1230 map = pci_map_single(qdev->pdev, &tx_ring_desc->oal,
1233 err = pci_dma_mapping_error(qdev->pdev, map);
1235 QPRINTK(qdev, TX_QUEUED, ERR,
1236 "PCI mapping outbound address list with error: %d\n",
1241 tbd->addr = cpu_to_le64(map);
1243 * The length is the number of fragments
1244 * that remain to be mapped times the length
1245 * of our sglist (OAL).
1248 cpu_to_le32((sizeof(struct tx_buf_desc) *
1249 (frag_cnt - frag_idx)) | TX_DESC_C);
1250 pci_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr,
1252 pci_unmap_len_set(&tx_ring_desc->map[map_idx], maplen,
1253 sizeof(struct oal));
1254 tbd = (struct tx_buf_desc *)&tx_ring_desc->oal;
1259 pci_map_page(qdev->pdev, frag->page,
1260 frag->page_offset, frag->size,
1263 err = pci_dma_mapping_error(qdev->pdev, map);
1265 QPRINTK(qdev, TX_QUEUED, ERR,
1266 "PCI mapping frags failed with error: %d.\n",
1271 tbd->addr = cpu_to_le64(map);
1272 tbd->len = cpu_to_le32(frag->size);
1273 pci_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr, map);
1274 pci_unmap_len_set(&tx_ring_desc->map[map_idx], maplen,
1278 /* Save the number of segments we've mapped. */
1279 tx_ring_desc->map_cnt = map_idx;
1280 /* Terminate the last segment. */
1281 tbd->len = cpu_to_le32(le32_to_cpu(tbd->len) | TX_DESC_E);
1282 return NETDEV_TX_OK;
1286 * If the first frag mapping failed, then i will be zero.
1287 * This causes the unmap of the skb->data area. Otherwise
1288 * we pass in the number of frags that mapped successfully
1289 * so they can be umapped.
1291 ql_unmap_send(qdev, tx_ring_desc, map_idx);
1292 return NETDEV_TX_BUSY;
1295 static void ql_realign_skb(struct sk_buff *skb, int len)
1297 void *temp_addr = skb->data;
1299 /* Undo the skb_reserve(skb,32) we did before
1300 * giving to hardware, and realign data on
1301 * a 2-byte boundary.
1303 skb->data -= QLGE_SB_PAD - NET_IP_ALIGN;
1304 skb->tail -= QLGE_SB_PAD - NET_IP_ALIGN;
1305 skb_copy_to_linear_data(skb, temp_addr,
1310 * This function builds an skb for the given inbound
1311 * completion. It will be rewritten for readability in the near
1312 * future, but for not it works well.
1314 static struct sk_buff *ql_build_rx_skb(struct ql_adapter *qdev,
1315 struct rx_ring *rx_ring,
1316 struct ib_mac_iocb_rsp *ib_mac_rsp)
1318 struct bq_desc *lbq_desc;
1319 struct bq_desc *sbq_desc;
1320 struct sk_buff *skb = NULL;
1321 u32 length = le32_to_cpu(ib_mac_rsp->data_len);
1322 u32 hdr_len = le32_to_cpu(ib_mac_rsp->hdr_len);
1325 * Handle the header buffer if present.
1327 if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HV &&
1328 ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) {
1329 QPRINTK(qdev, RX_STATUS, DEBUG, "Header of %d bytes in small buffer.\n", hdr_len);
1331 * Headers fit nicely into a small buffer.
1333 sbq_desc = ql_get_curr_sbuf(rx_ring);
1334 pci_unmap_single(qdev->pdev,
1335 pci_unmap_addr(sbq_desc, mapaddr),
1336 pci_unmap_len(sbq_desc, maplen),
1337 PCI_DMA_FROMDEVICE);
1338 skb = sbq_desc->p.skb;
1339 ql_realign_skb(skb, hdr_len);
1340 skb_put(skb, hdr_len);
1341 sbq_desc->p.skb = NULL;
1345 * Handle the data buffer(s).
1347 if (unlikely(!length)) { /* Is there data too? */
1348 QPRINTK(qdev, RX_STATUS, DEBUG,
1349 "No Data buffer in this packet.\n");
1353 if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DS) {
1354 if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) {
1355 QPRINTK(qdev, RX_STATUS, DEBUG,
1356 "Headers in small, data of %d bytes in small, combine them.\n", length);
1358 * Data is less than small buffer size so it's
1359 * stuffed in a small buffer.
1360 * For this case we append the data
1361 * from the "data" small buffer to the "header" small
1364 sbq_desc = ql_get_curr_sbuf(rx_ring);
1365 pci_dma_sync_single_for_cpu(qdev->pdev,
1367 (sbq_desc, mapaddr),
1370 PCI_DMA_FROMDEVICE);
1371 memcpy(skb_put(skb, length),
1372 sbq_desc->p.skb->data, length);
1373 pci_dma_sync_single_for_device(qdev->pdev,
1380 PCI_DMA_FROMDEVICE);
1382 QPRINTK(qdev, RX_STATUS, DEBUG,
1383 "%d bytes in a single small buffer.\n", length);
1384 sbq_desc = ql_get_curr_sbuf(rx_ring);
1385 skb = sbq_desc->p.skb;
1386 ql_realign_skb(skb, length);
1387 skb_put(skb, length);
1388 pci_unmap_single(qdev->pdev,
1389 pci_unmap_addr(sbq_desc,
1391 pci_unmap_len(sbq_desc,
1393 PCI_DMA_FROMDEVICE);
1394 sbq_desc->p.skb = NULL;
1396 } else if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DL) {
1397 if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) {
1398 QPRINTK(qdev, RX_STATUS, DEBUG,
1399 "Header in small, %d bytes in large. Chain large to small!\n", length);
1401 * The data is in a single large buffer. We
1402 * chain it to the header buffer's skb and let
1405 lbq_desc = ql_get_curr_lbuf(rx_ring);
1406 pci_unmap_page(qdev->pdev,
1407 pci_unmap_addr(lbq_desc,
1409 pci_unmap_len(lbq_desc, maplen),
1410 PCI_DMA_FROMDEVICE);
1411 QPRINTK(qdev, RX_STATUS, DEBUG,
1412 "Chaining page to skb.\n");
1413 skb_fill_page_desc(skb, 0, lbq_desc->p.lbq_page,
1416 skb->data_len += length;
1417 skb->truesize += length;
1418 lbq_desc->p.lbq_page = NULL;
1421 * The headers and data are in a single large buffer. We
1422 * copy it to a new skb and let it go. This can happen with
1423 * jumbo mtu on a non-TCP/UDP frame.
1425 lbq_desc = ql_get_curr_lbuf(rx_ring);
1426 skb = netdev_alloc_skb(qdev->ndev, length);
1428 QPRINTK(qdev, PROBE, DEBUG,
1429 "No skb available, drop the packet.\n");
1432 pci_unmap_page(qdev->pdev,
1433 pci_unmap_addr(lbq_desc,
1435 pci_unmap_len(lbq_desc, maplen),
1436 PCI_DMA_FROMDEVICE);
1437 skb_reserve(skb, NET_IP_ALIGN);
1438 QPRINTK(qdev, RX_STATUS, DEBUG,
1439 "%d bytes of headers and data in large. Chain page to new skb and pull tail.\n", length);
1440 skb_fill_page_desc(skb, 0, lbq_desc->p.lbq_page,
1443 skb->data_len += length;
1444 skb->truesize += length;
1446 lbq_desc->p.lbq_page = NULL;
1447 __pskb_pull_tail(skb,
1448 (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) ?
1449 VLAN_ETH_HLEN : ETH_HLEN);
1453 * The data is in a chain of large buffers
1454 * pointed to by a small buffer. We loop
1455 * thru and chain them to the our small header
1457 * frags: There are 18 max frags and our small
1458 * buffer will hold 32 of them. The thing is,
1459 * we'll use 3 max for our 9000 byte jumbo
1460 * frames. If the MTU goes up we could
1461 * eventually be in trouble.
1463 int size, offset, i = 0;
1464 __le64 *bq, bq_array[8];
1465 sbq_desc = ql_get_curr_sbuf(rx_ring);
1466 pci_unmap_single(qdev->pdev,
1467 pci_unmap_addr(sbq_desc, mapaddr),
1468 pci_unmap_len(sbq_desc, maplen),
1469 PCI_DMA_FROMDEVICE);
1470 if (!(ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS)) {
1472 * This is an non TCP/UDP IP frame, so
1473 * the headers aren't split into a small
1474 * buffer. We have to use the small buffer
1475 * that contains our sg list as our skb to
1476 * send upstairs. Copy the sg list here to
1477 * a local buffer and use it to find the
1480 QPRINTK(qdev, RX_STATUS, DEBUG,
1481 "%d bytes of headers & data in chain of large.\n", length);
1482 skb = sbq_desc->p.skb;
1484 memcpy(bq, skb->data, sizeof(bq_array));
1485 sbq_desc->p.skb = NULL;
1486 skb_reserve(skb, NET_IP_ALIGN);
1488 QPRINTK(qdev, RX_STATUS, DEBUG,
1489 "Headers in small, %d bytes of data in chain of large.\n", length);
1490 bq = (__le64 *)sbq_desc->p.skb->data;
1492 while (length > 0) {
1493 lbq_desc = ql_get_curr_lbuf(rx_ring);
1494 pci_unmap_page(qdev->pdev,
1495 pci_unmap_addr(lbq_desc,
1497 pci_unmap_len(lbq_desc,
1499 PCI_DMA_FROMDEVICE);
1500 size = (length < PAGE_SIZE) ? length : PAGE_SIZE;
1503 QPRINTK(qdev, RX_STATUS, DEBUG,
1504 "Adding page %d to skb for %d bytes.\n",
1506 skb_fill_page_desc(skb, i, lbq_desc->p.lbq_page,
1509 skb->data_len += size;
1510 skb->truesize += size;
1512 lbq_desc->p.lbq_page = NULL;
1516 __pskb_pull_tail(skb, (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) ?
1517 VLAN_ETH_HLEN : ETH_HLEN);
1522 /* Process an inbound completion from an rx ring. */
1523 static void ql_process_mac_rx_intr(struct ql_adapter *qdev,
1524 struct rx_ring *rx_ring,
1525 struct ib_mac_iocb_rsp *ib_mac_rsp)
1527 struct net_device *ndev = qdev->ndev;
1528 struct sk_buff *skb = NULL;
1529 u16 vlan_id = (le16_to_cpu(ib_mac_rsp->vlan_id) &
1530 IB_MAC_IOCB_RSP_VLAN_MASK)
1532 QL_DUMP_IB_MAC_RSP(ib_mac_rsp);
1534 skb = ql_build_rx_skb(qdev, rx_ring, ib_mac_rsp);
1535 if (unlikely(!skb)) {
1536 QPRINTK(qdev, RX_STATUS, DEBUG,
1537 "No skb available, drop packet.\n");
1541 /* Frame error, so drop the packet. */
1542 if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
1543 QPRINTK(qdev, DRV, ERR, "Receive error, flags2 = 0x%x\n",
1544 ib_mac_rsp->flags2);
1545 dev_kfree_skb_any(skb);
1549 /* The max framesize filter on this chip is set higher than
1550 * MTU since FCoE uses 2k frames.
1552 if (skb->len > ndev->mtu + ETH_HLEN) {
1553 dev_kfree_skb_any(skb);
1557 prefetch(skb->data);
1559 if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) {
1560 QPRINTK(qdev, RX_STATUS, DEBUG, "%s%s%s Multicast.\n",
1561 (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
1562 IB_MAC_IOCB_RSP_M_HASH ? "Hash" : "",
1563 (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
1564 IB_MAC_IOCB_RSP_M_REG ? "Registered" : "",
1565 (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
1566 IB_MAC_IOCB_RSP_M_PROM ? "Promiscuous" : "");
1568 if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P) {
1569 QPRINTK(qdev, RX_STATUS, DEBUG, "Promiscuous Packet.\n");
1572 skb->protocol = eth_type_trans(skb, ndev);
1573 skb->ip_summed = CHECKSUM_NONE;
1575 /* If rx checksum is on, and there are no
1576 * csum or frame errors.
1578 if (qdev->rx_csum &&
1579 !(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
1581 if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
1582 QPRINTK(qdev, RX_STATUS, DEBUG,
1583 "TCP checksum done!\n");
1584 skb->ip_summed = CHECKSUM_UNNECESSARY;
1585 } else if ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
1586 (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_V4)) {
1587 /* Unfragmented ipv4 UDP frame. */
1588 struct iphdr *iph = (struct iphdr *) skb->data;
1589 if (!(iph->frag_off &
1590 cpu_to_be16(IP_MF|IP_OFFSET))) {
1591 skb->ip_summed = CHECKSUM_UNNECESSARY;
1592 QPRINTK(qdev, RX_STATUS, DEBUG,
1593 "TCP checksum done!\n");
1598 qdev->stats.rx_packets++;
1599 qdev->stats.rx_bytes += skb->len;
1600 skb_record_rx_queue(skb,
1601 rx_ring->cq_id - qdev->rss_ring_first_cq_id);
1602 if (skb->ip_summed == CHECKSUM_UNNECESSARY) {
1604 (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) &&
1606 vlan_gro_receive(&rx_ring->napi, qdev->vlgrp,
1609 napi_gro_receive(&rx_ring->napi, skb);
1612 (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) &&
1614 vlan_hwaccel_receive_skb(skb, qdev->vlgrp, vlan_id);
1616 netif_receive_skb(skb);
1620 /* Process an outbound completion from an rx ring. */
1621 static void ql_process_mac_tx_intr(struct ql_adapter *qdev,
1622 struct ob_mac_iocb_rsp *mac_rsp)
1624 struct tx_ring *tx_ring;
1625 struct tx_ring_desc *tx_ring_desc;
1627 QL_DUMP_OB_MAC_RSP(mac_rsp);
1628 tx_ring = &qdev->tx_ring[mac_rsp->txq_idx];
1629 tx_ring_desc = &tx_ring->q[mac_rsp->tid];
1630 ql_unmap_send(qdev, tx_ring_desc, tx_ring_desc->map_cnt);
1631 qdev->stats.tx_bytes += tx_ring_desc->map_cnt;
1632 qdev->stats.tx_packets++;
1633 dev_kfree_skb(tx_ring_desc->skb);
1634 tx_ring_desc->skb = NULL;
1636 if (unlikely(mac_rsp->flags1 & (OB_MAC_IOCB_RSP_E |
1639 OB_MAC_IOCB_RSP_P | OB_MAC_IOCB_RSP_B))) {
1640 if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_E) {
1641 QPRINTK(qdev, TX_DONE, WARNING,
1642 "Total descriptor length did not match transfer length.\n");
1644 if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_S) {
1645 QPRINTK(qdev, TX_DONE, WARNING,
1646 "Frame too short to be legal, not sent.\n");
1648 if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_L) {
1649 QPRINTK(qdev, TX_DONE, WARNING,
1650 "Frame too long, but sent anyway.\n");
1652 if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_B) {
1653 QPRINTK(qdev, TX_DONE, WARNING,
1654 "PCI backplane error. Frame not sent.\n");
1657 atomic_inc(&tx_ring->tx_count);
1660 /* Fire up a handler to reset the MPI processor. */
1661 void ql_queue_fw_error(struct ql_adapter *qdev)
1663 netif_carrier_off(qdev->ndev);
1664 queue_delayed_work(qdev->workqueue, &qdev->mpi_reset_work, 0);
1667 void ql_queue_asic_error(struct ql_adapter *qdev)
1669 netif_carrier_off(qdev->ndev);
1670 ql_disable_interrupts(qdev);
1671 /* Clear adapter up bit to signal the recovery
1672 * process that it shouldn't kill the reset worker
1675 clear_bit(QL_ADAPTER_UP, &qdev->flags);
1676 queue_delayed_work(qdev->workqueue, &qdev->asic_reset_work, 0);
1679 static void ql_process_chip_ae_intr(struct ql_adapter *qdev,
1680 struct ib_ae_iocb_rsp *ib_ae_rsp)
1682 switch (ib_ae_rsp->event) {
1683 case MGMT_ERR_EVENT:
1684 QPRINTK(qdev, RX_ERR, ERR,
1685 "Management Processor Fatal Error.\n");
1686 ql_queue_fw_error(qdev);
1689 case CAM_LOOKUP_ERR_EVENT:
1690 QPRINTK(qdev, LINK, ERR,
1691 "Multiple CAM hits lookup occurred.\n");
1692 QPRINTK(qdev, DRV, ERR, "This event shouldn't occur.\n");
1693 ql_queue_asic_error(qdev);
1696 case SOFT_ECC_ERROR_EVENT:
1697 QPRINTK(qdev, RX_ERR, ERR, "Soft ECC error detected.\n");
1698 ql_queue_asic_error(qdev);
1701 case PCI_ERR_ANON_BUF_RD:
1702 QPRINTK(qdev, RX_ERR, ERR,
1703 "PCI error occurred when reading anonymous buffers from rx_ring %d.\n",
1705 ql_queue_asic_error(qdev);
1709 QPRINTK(qdev, DRV, ERR, "Unexpected event %d.\n",
1711 ql_queue_asic_error(qdev);
1716 static int ql_clean_outbound_rx_ring(struct rx_ring *rx_ring)
1718 struct ql_adapter *qdev = rx_ring->qdev;
1719 u32 prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg);
1720 struct ob_mac_iocb_rsp *net_rsp = NULL;
1723 struct tx_ring *tx_ring;
1724 /* While there are entries in the completion queue. */
1725 while (prod != rx_ring->cnsmr_idx) {
1727 QPRINTK(qdev, RX_STATUS, DEBUG,
1728 "cq_id = %d, prod = %d, cnsmr = %d.\n.", rx_ring->cq_id,
1729 prod, rx_ring->cnsmr_idx);
1731 net_rsp = (struct ob_mac_iocb_rsp *)rx_ring->curr_entry;
1733 switch (net_rsp->opcode) {
1735 case OPCODE_OB_MAC_TSO_IOCB:
1736 case OPCODE_OB_MAC_IOCB:
1737 ql_process_mac_tx_intr(qdev, net_rsp);
1740 QPRINTK(qdev, RX_STATUS, DEBUG,
1741 "Hit default case, not handled! dropping the packet, opcode = %x.\n",
1745 ql_update_cq(rx_ring);
1746 prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg);
1748 ql_write_cq_idx(rx_ring);
1749 tx_ring = &qdev->tx_ring[net_rsp->txq_idx];
1750 if (__netif_subqueue_stopped(qdev->ndev, tx_ring->wq_id) &&
1752 if (atomic_read(&tx_ring->queue_stopped) &&
1753 (atomic_read(&tx_ring->tx_count) > (tx_ring->wq_len / 4)))
1755 * The queue got stopped because the tx_ring was full.
1756 * Wake it up, because it's now at least 25% empty.
1758 netif_wake_subqueue(qdev->ndev, tx_ring->wq_id);
1764 static int ql_clean_inbound_rx_ring(struct rx_ring *rx_ring, int budget)
1766 struct ql_adapter *qdev = rx_ring->qdev;
1767 u32 prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg);
1768 struct ql_net_rsp_iocb *net_rsp;
1771 /* While there are entries in the completion queue. */
1772 while (prod != rx_ring->cnsmr_idx) {
1774 QPRINTK(qdev, RX_STATUS, DEBUG,
1775 "cq_id = %d, prod = %d, cnsmr = %d.\n.", rx_ring->cq_id,
1776 prod, rx_ring->cnsmr_idx);
1778 net_rsp = rx_ring->curr_entry;
1780 switch (net_rsp->opcode) {
1781 case OPCODE_IB_MAC_IOCB:
1782 ql_process_mac_rx_intr(qdev, rx_ring,
1783 (struct ib_mac_iocb_rsp *)
1787 case OPCODE_IB_AE_IOCB:
1788 ql_process_chip_ae_intr(qdev, (struct ib_ae_iocb_rsp *)
1793 QPRINTK(qdev, RX_STATUS, DEBUG,
1794 "Hit default case, not handled! dropping the packet, opcode = %x.\n",
1799 ql_update_cq(rx_ring);
1800 prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg);
1801 if (count == budget)
1804 ql_update_buffer_queues(qdev, rx_ring);
1805 ql_write_cq_idx(rx_ring);
1809 static int ql_napi_poll_msix(struct napi_struct *napi, int budget)
1811 struct rx_ring *rx_ring = container_of(napi, struct rx_ring, napi);
1812 struct ql_adapter *qdev = rx_ring->qdev;
1813 int work_done = ql_clean_inbound_rx_ring(rx_ring, budget);
1815 QPRINTK(qdev, RX_STATUS, DEBUG, "Enter, NAPI POLL cq_id = %d.\n",
1818 if (work_done < budget) {
1819 napi_complete(napi);
1820 ql_enable_completion_interrupt(qdev, rx_ring->irq);
1825 static void ql_vlan_rx_register(struct net_device *ndev, struct vlan_group *grp)
1827 struct ql_adapter *qdev = netdev_priv(ndev);
1831 QPRINTK(qdev, IFUP, DEBUG, "Turning on VLAN in NIC_RCV_CFG.\n");
1832 ql_write32(qdev, NIC_RCV_CFG, NIC_RCV_CFG_VLAN_MASK |
1833 NIC_RCV_CFG_VLAN_MATCH_AND_NON);
1835 QPRINTK(qdev, IFUP, DEBUG,
1836 "Turning off VLAN in NIC_RCV_CFG.\n");
1837 ql_write32(qdev, NIC_RCV_CFG, NIC_RCV_CFG_VLAN_MASK);
1841 static void ql_vlan_rx_add_vid(struct net_device *ndev, u16 vid)
1843 struct ql_adapter *qdev = netdev_priv(ndev);
1844 u32 enable_bit = MAC_ADDR_E;
1847 status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
1850 spin_lock(&qdev->hw_lock);
1851 if (ql_set_mac_addr_reg
1852 (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) {
1853 QPRINTK(qdev, IFUP, ERR, "Failed to init vlan address.\n");
1855 spin_unlock(&qdev->hw_lock);
1856 ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
1859 static void ql_vlan_rx_kill_vid(struct net_device *ndev, u16 vid)
1861 struct ql_adapter *qdev = netdev_priv(ndev);
1865 status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
1869 spin_lock(&qdev->hw_lock);
1870 if (ql_set_mac_addr_reg
1871 (qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) {
1872 QPRINTK(qdev, IFUP, ERR, "Failed to clear vlan address.\n");
1874 spin_unlock(&qdev->hw_lock);
1875 ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
1879 /* Worker thread to process a given rx_ring that is dedicated
1880 * to outbound completions.
1882 static void ql_tx_clean(struct work_struct *work)
1884 struct rx_ring *rx_ring =
1885 container_of(work, struct rx_ring, rx_work.work);
1886 ql_clean_outbound_rx_ring(rx_ring);
1887 ql_enable_completion_interrupt(rx_ring->qdev, rx_ring->irq);
1891 /* Worker thread to process a given rx_ring that is dedicated
1892 * to inbound completions.
1894 static void ql_rx_clean(struct work_struct *work)
1896 struct rx_ring *rx_ring =
1897 container_of(work, struct rx_ring, rx_work.work);
1898 ql_clean_inbound_rx_ring(rx_ring, 64);
1899 ql_enable_completion_interrupt(rx_ring->qdev, rx_ring->irq);
1902 /* MSI-X Multiple Vector Interrupt Handler for outbound completions. */
1903 static irqreturn_t qlge_msix_tx_isr(int irq, void *dev_id)
1905 struct rx_ring *rx_ring = dev_id;
1906 queue_delayed_work_on(rx_ring->cpu, rx_ring->qdev->q_workqueue,
1907 &rx_ring->rx_work, 0);
1911 /* MSI-X Multiple Vector Interrupt Handler for inbound completions. */
1912 static irqreturn_t qlge_msix_rx_isr(int irq, void *dev_id)
1914 struct rx_ring *rx_ring = dev_id;
1915 napi_schedule(&rx_ring->napi);
1919 /* This handles a fatal error, MPI activity, and the default
1920 * rx_ring in an MSI-X multiple vector environment.
1921 * In MSI/Legacy environment it also process the rest of
1924 static irqreturn_t qlge_isr(int irq, void *dev_id)
1926 struct rx_ring *rx_ring = dev_id;
1927 struct ql_adapter *qdev = rx_ring->qdev;
1928 struct intr_context *intr_context = &qdev->intr_context[0];
1933 spin_lock(&qdev->hw_lock);
1934 if (atomic_read(&qdev->intr_context[0].irq_cnt)) {
1935 QPRINTK(qdev, INTR, DEBUG, "Shared Interrupt, Not ours!\n");
1936 spin_unlock(&qdev->hw_lock);
1939 spin_unlock(&qdev->hw_lock);
1941 var = ql_disable_completion_interrupt(qdev, intr_context->intr);
1944 * Check for fatal error.
1947 ql_queue_asic_error(qdev);
1948 QPRINTK(qdev, INTR, ERR, "Got fatal error, STS = %x.\n", var);
1949 var = ql_read32(qdev, ERR_STS);
1950 QPRINTK(qdev, INTR, ERR,
1951 "Resetting chip. Error Status Register = 0x%x\n", var);
1956 * Check MPI processor activity.
1960 * We've got an async event or mailbox completion.
1961 * Handle it and clear the source of the interrupt.
1963 QPRINTK(qdev, INTR, ERR, "Got MPI processor interrupt.\n");
1964 ql_disable_completion_interrupt(qdev, intr_context->intr);
1965 queue_delayed_work_on(smp_processor_id(), qdev->workqueue,
1966 &qdev->mpi_work, 0);
1971 * Check the default queue and wake handler if active.
1973 rx_ring = &qdev->rx_ring[0];
1974 if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) != rx_ring->cnsmr_idx) {
1975 QPRINTK(qdev, INTR, INFO, "Waking handler for rx_ring[0].\n");
1976 ql_disable_completion_interrupt(qdev, intr_context->intr);
1977 queue_delayed_work_on(smp_processor_id(), qdev->q_workqueue,
1978 &rx_ring->rx_work, 0);
1982 if (!test_bit(QL_MSIX_ENABLED, &qdev->flags)) {
1984 * Start the DPC for each active queue.
1986 for (i = 1; i < qdev->rx_ring_count; i++) {
1987 rx_ring = &qdev->rx_ring[i];
1988 if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) !=
1989 rx_ring->cnsmr_idx) {
1990 QPRINTK(qdev, INTR, INFO,
1991 "Waking handler for rx_ring[%d].\n", i);
1992 ql_disable_completion_interrupt(qdev,
1995 if (i < qdev->rss_ring_first_cq_id)
1996 queue_delayed_work_on(rx_ring->cpu,
2001 napi_schedule(&rx_ring->napi);
2006 ql_enable_completion_interrupt(qdev, intr_context->intr);
2007 return work_done ? IRQ_HANDLED : IRQ_NONE;
2010 static int ql_tso(struct sk_buff *skb, struct ob_mac_tso_iocb_req *mac_iocb_ptr)
2013 if (skb_is_gso(skb)) {
2015 if (skb_header_cloned(skb)) {
2016 err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
2021 mac_iocb_ptr->opcode = OPCODE_OB_MAC_TSO_IOCB;
2022 mac_iocb_ptr->flags3 |= OB_MAC_TSO_IOCB_IC;
2023 mac_iocb_ptr->frame_len = cpu_to_le32((u32) skb->len);
2024 mac_iocb_ptr->total_hdrs_len =
2025 cpu_to_le16(skb_transport_offset(skb) + tcp_hdrlen(skb));
2026 mac_iocb_ptr->net_trans_offset =
2027 cpu_to_le16(skb_network_offset(skb) |
2028 skb_transport_offset(skb)
2029 << OB_MAC_TRANSPORT_HDR_SHIFT);
2030 mac_iocb_ptr->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
2031 mac_iocb_ptr->flags2 |= OB_MAC_TSO_IOCB_LSO;
2032 if (likely(skb->protocol == htons(ETH_P_IP))) {
2033 struct iphdr *iph = ip_hdr(skb);
2035 mac_iocb_ptr->flags1 |= OB_MAC_TSO_IOCB_IP4;
2036 tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
2040 } else if (skb->protocol == htons(ETH_P_IPV6)) {
2041 mac_iocb_ptr->flags1 |= OB_MAC_TSO_IOCB_IP6;
2042 tcp_hdr(skb)->check =
2043 ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
2044 &ipv6_hdr(skb)->daddr,
2052 static void ql_hw_csum_setup(struct sk_buff *skb,
2053 struct ob_mac_tso_iocb_req *mac_iocb_ptr)
2056 struct iphdr *iph = ip_hdr(skb);
2058 mac_iocb_ptr->opcode = OPCODE_OB_MAC_TSO_IOCB;
2059 mac_iocb_ptr->frame_len = cpu_to_le32((u32) skb->len);
2060 mac_iocb_ptr->net_trans_offset =
2061 cpu_to_le16(skb_network_offset(skb) |
2062 skb_transport_offset(skb) << OB_MAC_TRANSPORT_HDR_SHIFT);
2064 mac_iocb_ptr->flags1 |= OB_MAC_TSO_IOCB_IP4;
2065 len = (ntohs(iph->tot_len) - (iph->ihl << 2));
2066 if (likely(iph->protocol == IPPROTO_TCP)) {
2067 check = &(tcp_hdr(skb)->check);
2068 mac_iocb_ptr->flags2 |= OB_MAC_TSO_IOCB_TC;
2069 mac_iocb_ptr->total_hdrs_len =
2070 cpu_to_le16(skb_transport_offset(skb) +
2071 (tcp_hdr(skb)->doff << 2));
2073 check = &(udp_hdr(skb)->check);
2074 mac_iocb_ptr->flags2 |= OB_MAC_TSO_IOCB_UC;
2075 mac_iocb_ptr->total_hdrs_len =
2076 cpu_to_le16(skb_transport_offset(skb) +
2077 sizeof(struct udphdr));
2079 *check = ~csum_tcpudp_magic(iph->saddr,
2080 iph->daddr, len, iph->protocol, 0);
2083 static int qlge_send(struct sk_buff *skb, struct net_device *ndev)
2085 struct tx_ring_desc *tx_ring_desc;
2086 struct ob_mac_iocb_req *mac_iocb_ptr;
2087 struct ql_adapter *qdev = netdev_priv(ndev);
2089 struct tx_ring *tx_ring;
2090 u32 tx_ring_idx = (u32) skb->queue_mapping;
2092 tx_ring = &qdev->tx_ring[tx_ring_idx];
2094 if (skb_padto(skb, ETH_ZLEN))
2095 return NETDEV_TX_OK;
2097 if (unlikely(atomic_read(&tx_ring->tx_count) < 2)) {
2098 QPRINTK(qdev, TX_QUEUED, INFO,
2099 "%s: shutting down tx queue %d du to lack of resources.\n",
2100 __func__, tx_ring_idx);
2101 netif_stop_subqueue(ndev, tx_ring->wq_id);
2102 atomic_inc(&tx_ring->queue_stopped);
2103 return NETDEV_TX_BUSY;
2105 tx_ring_desc = &tx_ring->q[tx_ring->prod_idx];
2106 mac_iocb_ptr = tx_ring_desc->queue_entry;
2107 memset((void *)mac_iocb_ptr, 0, sizeof(mac_iocb_ptr));
2109 mac_iocb_ptr->opcode = OPCODE_OB_MAC_IOCB;
2110 mac_iocb_ptr->tid = tx_ring_desc->index;
2111 /* We use the upper 32-bits to store the tx queue for this IO.
2112 * When we get the completion we can use it to establish the context.
2114 mac_iocb_ptr->txq_idx = tx_ring_idx;
2115 tx_ring_desc->skb = skb;
2117 mac_iocb_ptr->frame_len = cpu_to_le16((u16) skb->len);
2119 if (qdev->vlgrp && vlan_tx_tag_present(skb)) {
2120 QPRINTK(qdev, TX_QUEUED, DEBUG, "Adding a vlan tag %d.\n",
2121 vlan_tx_tag_get(skb));
2122 mac_iocb_ptr->flags3 |= OB_MAC_IOCB_V;
2123 mac_iocb_ptr->vlan_tci = cpu_to_le16(vlan_tx_tag_get(skb));
2125 tso = ql_tso(skb, (struct ob_mac_tso_iocb_req *)mac_iocb_ptr);
2127 dev_kfree_skb_any(skb);
2128 return NETDEV_TX_OK;
2129 } else if (unlikely(!tso) && (skb->ip_summed == CHECKSUM_PARTIAL)) {
2130 ql_hw_csum_setup(skb,
2131 (struct ob_mac_tso_iocb_req *)mac_iocb_ptr);
2133 if (ql_map_send(qdev, mac_iocb_ptr, skb, tx_ring_desc) !=
2135 QPRINTK(qdev, TX_QUEUED, ERR,
2136 "Could not map the segments.\n");
2137 return NETDEV_TX_BUSY;
2139 QL_DUMP_OB_MAC_IOCB(mac_iocb_ptr);
2140 tx_ring->prod_idx++;
2141 if (tx_ring->prod_idx == tx_ring->wq_len)
2142 tx_ring->prod_idx = 0;
2145 ql_write_db_reg(tx_ring->prod_idx, tx_ring->prod_idx_db_reg);
2146 QPRINTK(qdev, TX_QUEUED, DEBUG, "tx queued, slot %d, len %d\n",
2147 tx_ring->prod_idx, skb->len);
2149 atomic_dec(&tx_ring->tx_count);
2150 return NETDEV_TX_OK;
2153 static void ql_free_shadow_space(struct ql_adapter *qdev)
2155 if (qdev->rx_ring_shadow_reg_area) {
2156 pci_free_consistent(qdev->pdev,
2158 qdev->rx_ring_shadow_reg_area,
2159 qdev->rx_ring_shadow_reg_dma);
2160 qdev->rx_ring_shadow_reg_area = NULL;
2162 if (qdev->tx_ring_shadow_reg_area) {
2163 pci_free_consistent(qdev->pdev,
2165 qdev->tx_ring_shadow_reg_area,
2166 qdev->tx_ring_shadow_reg_dma);
2167 qdev->tx_ring_shadow_reg_area = NULL;
2171 static int ql_alloc_shadow_space(struct ql_adapter *qdev)
2173 qdev->rx_ring_shadow_reg_area =
2174 pci_alloc_consistent(qdev->pdev,
2175 PAGE_SIZE, &qdev->rx_ring_shadow_reg_dma);
2176 if (qdev->rx_ring_shadow_reg_area == NULL) {
2177 QPRINTK(qdev, IFUP, ERR,
2178 "Allocation of RX shadow space failed.\n");
2181 memset(qdev->rx_ring_shadow_reg_area, 0, PAGE_SIZE);
2182 qdev->tx_ring_shadow_reg_area =
2183 pci_alloc_consistent(qdev->pdev, PAGE_SIZE,
2184 &qdev->tx_ring_shadow_reg_dma);
2185 if (qdev->tx_ring_shadow_reg_area == NULL) {
2186 QPRINTK(qdev, IFUP, ERR,
2187 "Allocation of TX shadow space failed.\n");
2188 goto err_wqp_sh_area;
2190 memset(qdev->tx_ring_shadow_reg_area, 0, PAGE_SIZE);
2194 pci_free_consistent(qdev->pdev,
2196 qdev->rx_ring_shadow_reg_area,
2197 qdev->rx_ring_shadow_reg_dma);
2201 static void ql_init_tx_ring(struct ql_adapter *qdev, struct tx_ring *tx_ring)
2203 struct tx_ring_desc *tx_ring_desc;
2205 struct ob_mac_iocb_req *mac_iocb_ptr;
2207 mac_iocb_ptr = tx_ring->wq_base;
2208 tx_ring_desc = tx_ring->q;
2209 for (i = 0; i < tx_ring->wq_len; i++) {
2210 tx_ring_desc->index = i;
2211 tx_ring_desc->skb = NULL;
2212 tx_ring_desc->queue_entry = mac_iocb_ptr;
2216 atomic_set(&tx_ring->tx_count, tx_ring->wq_len);
2217 atomic_set(&tx_ring->queue_stopped, 0);
2220 static void ql_free_tx_resources(struct ql_adapter *qdev,
2221 struct tx_ring *tx_ring)
2223 if (tx_ring->wq_base) {
2224 pci_free_consistent(qdev->pdev, tx_ring->wq_size,
2225 tx_ring->wq_base, tx_ring->wq_base_dma);
2226 tx_ring->wq_base = NULL;
2232 static int ql_alloc_tx_resources(struct ql_adapter *qdev,
2233 struct tx_ring *tx_ring)
2236 pci_alloc_consistent(qdev->pdev, tx_ring->wq_size,
2237 &tx_ring->wq_base_dma);
2239 if ((tx_ring->wq_base == NULL)
2240 || tx_ring->wq_base_dma & (tx_ring->wq_size - 1)) {
2241 QPRINTK(qdev, IFUP, ERR, "tx_ring alloc failed.\n");
2245 kmalloc(tx_ring->wq_len * sizeof(struct tx_ring_desc), GFP_KERNEL);
2246 if (tx_ring->q == NULL)
2251 pci_free_consistent(qdev->pdev, tx_ring->wq_size,
2252 tx_ring->wq_base, tx_ring->wq_base_dma);
2256 static void ql_free_lbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring)
2259 struct bq_desc *lbq_desc;
2261 for (i = 0; i < rx_ring->lbq_len; i++) {
2262 lbq_desc = &rx_ring->lbq[i];
2263 if (lbq_desc->p.lbq_page) {
2264 pci_unmap_page(qdev->pdev,
2265 pci_unmap_addr(lbq_desc, mapaddr),
2266 pci_unmap_len(lbq_desc, maplen),
2267 PCI_DMA_FROMDEVICE);
2269 put_page(lbq_desc->p.lbq_page);
2270 lbq_desc->p.lbq_page = NULL;
2275 static void ql_free_sbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring)
2278 struct bq_desc *sbq_desc;
2280 for (i = 0; i < rx_ring->sbq_len; i++) {
2281 sbq_desc = &rx_ring->sbq[i];
2282 if (sbq_desc == NULL) {
2283 QPRINTK(qdev, IFUP, ERR, "sbq_desc %d is NULL.\n", i);
2286 if (sbq_desc->p.skb) {
2287 pci_unmap_single(qdev->pdev,
2288 pci_unmap_addr(sbq_desc, mapaddr),
2289 pci_unmap_len(sbq_desc, maplen),
2290 PCI_DMA_FROMDEVICE);
2291 dev_kfree_skb(sbq_desc->p.skb);
2292 sbq_desc->p.skb = NULL;
2297 /* Free all large and small rx buffers associated
2298 * with the completion queues for this device.
2300 static void ql_free_rx_buffers(struct ql_adapter *qdev)
2303 struct rx_ring *rx_ring;
2305 for (i = 0; i < qdev->rx_ring_count; i++) {
2306 rx_ring = &qdev->rx_ring[i];
2308 ql_free_lbq_buffers(qdev, rx_ring);
2310 ql_free_sbq_buffers(qdev, rx_ring);
2314 static void ql_alloc_rx_buffers(struct ql_adapter *qdev)
2316 struct rx_ring *rx_ring;
2319 for (i = 0; i < qdev->rx_ring_count; i++) {
2320 rx_ring = &qdev->rx_ring[i];
2321 if (rx_ring->type != TX_Q)
2322 ql_update_buffer_queues(qdev, rx_ring);
2326 static void ql_init_lbq_ring(struct ql_adapter *qdev,
2327 struct rx_ring *rx_ring)
2330 struct bq_desc *lbq_desc;
2331 __le64 *bq = rx_ring->lbq_base;
2333 memset(rx_ring->lbq, 0, rx_ring->lbq_len * sizeof(struct bq_desc));
2334 for (i = 0; i < rx_ring->lbq_len; i++) {
2335 lbq_desc = &rx_ring->lbq[i];
2336 memset(lbq_desc, 0, sizeof(*lbq_desc));
2337 lbq_desc->index = i;
2338 lbq_desc->addr = bq;
2343 static void ql_init_sbq_ring(struct ql_adapter *qdev,
2344 struct rx_ring *rx_ring)
2347 struct bq_desc *sbq_desc;
2348 __le64 *bq = rx_ring->sbq_base;
2350 memset(rx_ring->sbq, 0, rx_ring->sbq_len * sizeof(struct bq_desc));
2351 for (i = 0; i < rx_ring->sbq_len; i++) {
2352 sbq_desc = &rx_ring->sbq[i];
2353 memset(sbq_desc, 0, sizeof(*sbq_desc));
2354 sbq_desc->index = i;
2355 sbq_desc->addr = bq;
2360 static void ql_free_rx_resources(struct ql_adapter *qdev,
2361 struct rx_ring *rx_ring)
2363 /* Free the small buffer queue. */
2364 if (rx_ring->sbq_base) {
2365 pci_free_consistent(qdev->pdev,
2367 rx_ring->sbq_base, rx_ring->sbq_base_dma);
2368 rx_ring->sbq_base = NULL;
2371 /* Free the small buffer queue control blocks. */
2372 kfree(rx_ring->sbq);
2373 rx_ring->sbq = NULL;
2375 /* Free the large buffer queue. */
2376 if (rx_ring->lbq_base) {
2377 pci_free_consistent(qdev->pdev,
2379 rx_ring->lbq_base, rx_ring->lbq_base_dma);
2380 rx_ring->lbq_base = NULL;
2383 /* Free the large buffer queue control blocks. */
2384 kfree(rx_ring->lbq);
2385 rx_ring->lbq = NULL;
2387 /* Free the rx queue. */
2388 if (rx_ring->cq_base) {
2389 pci_free_consistent(qdev->pdev,
2391 rx_ring->cq_base, rx_ring->cq_base_dma);
2392 rx_ring->cq_base = NULL;
2396 /* Allocate queues and buffers for this completions queue based
2397 * on the values in the parameter structure. */
2398 static int ql_alloc_rx_resources(struct ql_adapter *qdev,
2399 struct rx_ring *rx_ring)
2403 * Allocate the completion queue for this rx_ring.
2406 pci_alloc_consistent(qdev->pdev, rx_ring->cq_size,
2407 &rx_ring->cq_base_dma);
2409 if (rx_ring->cq_base == NULL) {
2410 QPRINTK(qdev, IFUP, ERR, "rx_ring alloc failed.\n");
2414 if (rx_ring->sbq_len) {
2416 * Allocate small buffer queue.
2419 pci_alloc_consistent(qdev->pdev, rx_ring->sbq_size,
2420 &rx_ring->sbq_base_dma);
2422 if (rx_ring->sbq_base == NULL) {
2423 QPRINTK(qdev, IFUP, ERR,
2424 "Small buffer queue allocation failed.\n");
2429 * Allocate small buffer queue control blocks.
2432 kmalloc(rx_ring->sbq_len * sizeof(struct bq_desc),
2434 if (rx_ring->sbq == NULL) {
2435 QPRINTK(qdev, IFUP, ERR,
2436 "Small buffer queue control block allocation failed.\n");
2440 ql_init_sbq_ring(qdev, rx_ring);
2443 if (rx_ring->lbq_len) {
2445 * Allocate large buffer queue.
2448 pci_alloc_consistent(qdev->pdev, rx_ring->lbq_size,
2449 &rx_ring->lbq_base_dma);
2451 if (rx_ring->lbq_base == NULL) {
2452 QPRINTK(qdev, IFUP, ERR,
2453 "Large buffer queue allocation failed.\n");
2457 * Allocate large buffer queue control blocks.
2460 kmalloc(rx_ring->lbq_len * sizeof(struct bq_desc),
2462 if (rx_ring->lbq == NULL) {
2463 QPRINTK(qdev, IFUP, ERR,
2464 "Large buffer queue control block allocation failed.\n");
2468 ql_init_lbq_ring(qdev, rx_ring);
2474 ql_free_rx_resources(qdev, rx_ring);
2478 static void ql_tx_ring_clean(struct ql_adapter *qdev)
2480 struct tx_ring *tx_ring;
2481 struct tx_ring_desc *tx_ring_desc;
2485 * Loop through all queues and free
2488 for (j = 0; j < qdev->tx_ring_count; j++) {
2489 tx_ring = &qdev->tx_ring[j];
2490 for (i = 0; i < tx_ring->wq_len; i++) {
2491 tx_ring_desc = &tx_ring->q[i];
2492 if (tx_ring_desc && tx_ring_desc->skb) {
2493 QPRINTK(qdev, IFDOWN, ERR,
2494 "Freeing lost SKB %p, from queue %d, index %d.\n",
2495 tx_ring_desc->skb, j,
2496 tx_ring_desc->index);
2497 ql_unmap_send(qdev, tx_ring_desc,
2498 tx_ring_desc->map_cnt);
2499 dev_kfree_skb(tx_ring_desc->skb);
2500 tx_ring_desc->skb = NULL;
2506 static void ql_free_mem_resources(struct ql_adapter *qdev)
2510 for (i = 0; i < qdev->tx_ring_count; i++)
2511 ql_free_tx_resources(qdev, &qdev->tx_ring[i]);
2512 for (i = 0; i < qdev->rx_ring_count; i++)
2513 ql_free_rx_resources(qdev, &qdev->rx_ring[i]);
2514 ql_free_shadow_space(qdev);
2517 static int ql_alloc_mem_resources(struct ql_adapter *qdev)
2521 /* Allocate space for our shadow registers and such. */
2522 if (ql_alloc_shadow_space(qdev))
2525 for (i = 0; i < qdev->rx_ring_count; i++) {
2526 if (ql_alloc_rx_resources(qdev, &qdev->rx_ring[i]) != 0) {
2527 QPRINTK(qdev, IFUP, ERR,
2528 "RX resource allocation failed.\n");
2532 /* Allocate tx queue resources */
2533 for (i = 0; i < qdev->tx_ring_count; i++) {
2534 if (ql_alloc_tx_resources(qdev, &qdev->tx_ring[i]) != 0) {
2535 QPRINTK(qdev, IFUP, ERR,
2536 "TX resource allocation failed.\n");
2543 ql_free_mem_resources(qdev);
2547 /* Set up the rx ring control block and pass it to the chip.
2548 * The control block is defined as
2549 * "Completion Queue Initialization Control Block", or cqicb.
2551 static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
2553 struct cqicb *cqicb = &rx_ring->cqicb;
2554 void *shadow_reg = qdev->rx_ring_shadow_reg_area +
2555 (rx_ring->cq_id * sizeof(u64) * 4);
2556 u64 shadow_reg_dma = qdev->rx_ring_shadow_reg_dma +
2557 (rx_ring->cq_id * sizeof(u64) * 4);
2558 void __iomem *doorbell_area =
2559 qdev->doorbell_area + (DB_PAGE_SIZE * (128 + rx_ring->cq_id));
2564 /* Set up the shadow registers for this ring. */
2565 rx_ring->prod_idx_sh_reg = shadow_reg;
2566 rx_ring->prod_idx_sh_reg_dma = shadow_reg_dma;
2567 shadow_reg += sizeof(u64);
2568 shadow_reg_dma += sizeof(u64);
2569 rx_ring->lbq_base_indirect = shadow_reg;
2570 rx_ring->lbq_base_indirect_dma = shadow_reg_dma;
2571 shadow_reg += sizeof(u64);
2572 shadow_reg_dma += sizeof(u64);
2573 rx_ring->sbq_base_indirect = shadow_reg;
2574 rx_ring->sbq_base_indirect_dma = shadow_reg_dma;
2576 /* PCI doorbell mem area + 0x00 for consumer index register */
2577 rx_ring->cnsmr_idx_db_reg = (u32 __iomem *) doorbell_area;
2578 rx_ring->cnsmr_idx = 0;
2579 rx_ring->curr_entry = rx_ring->cq_base;
2581 /* PCI doorbell mem area + 0x04 for valid register */
2582 rx_ring->valid_db_reg = doorbell_area + 0x04;
2584 /* PCI doorbell mem area + 0x18 for large buffer consumer */
2585 rx_ring->lbq_prod_idx_db_reg = (u32 __iomem *) (doorbell_area + 0x18);
2587 /* PCI doorbell mem area + 0x1c */
2588 rx_ring->sbq_prod_idx_db_reg = (u32 __iomem *) (doorbell_area + 0x1c);
2590 memset((void *)cqicb, 0, sizeof(struct cqicb));
2591 cqicb->msix_vect = rx_ring->irq;
2593 bq_len = (rx_ring->cq_len == 65536) ? 0 : (u16) rx_ring->cq_len;
2594 cqicb->len = cpu_to_le16(bq_len | LEN_V | LEN_CPP_CONT);
2596 cqicb->addr = cpu_to_le64(rx_ring->cq_base_dma);
2598 cqicb->prod_idx_addr = cpu_to_le64(rx_ring->prod_idx_sh_reg_dma);
2601 * Set up the control block load flags.
2603 cqicb->flags = FLAGS_LC | /* Load queue base address */
2604 FLAGS_LV | /* Load MSI-X vector */
2605 FLAGS_LI; /* Load irq delay values */
2606 if (rx_ring->lbq_len) {
2607 cqicb->flags |= FLAGS_LL; /* Load lbq values */
2608 tmp = (u64)rx_ring->lbq_base_dma;;
2609 *((__le64 *) rx_ring->lbq_base_indirect) = cpu_to_le64(tmp);
2611 cpu_to_le64(rx_ring->lbq_base_indirect_dma);
2612 bq_len = (rx_ring->lbq_buf_size == 65536) ? 0 :
2613 (u16) rx_ring->lbq_buf_size;
2614 cqicb->lbq_buf_size = cpu_to_le16(bq_len);
2615 bq_len = (rx_ring->lbq_len == 65536) ? 0 :
2616 (u16) rx_ring->lbq_len;
2617 cqicb->lbq_len = cpu_to_le16(bq_len);
2618 rx_ring->lbq_prod_idx = 0;
2619 rx_ring->lbq_curr_idx = 0;
2620 rx_ring->lbq_clean_idx = 0;
2621 rx_ring->lbq_free_cnt = rx_ring->lbq_len;
2623 if (rx_ring->sbq_len) {
2624 cqicb->flags |= FLAGS_LS; /* Load sbq values */
2625 tmp = (u64)rx_ring->sbq_base_dma;;
2626 *((__le64 *) rx_ring->sbq_base_indirect) = cpu_to_le64(tmp);
2628 cpu_to_le64(rx_ring->sbq_base_indirect_dma);
2629 cqicb->sbq_buf_size =
2630 cpu_to_le16((u16)(rx_ring->sbq_buf_size/2));
2631 bq_len = (rx_ring->sbq_len == 65536) ? 0 :
2632 (u16) rx_ring->sbq_len;
2633 cqicb->sbq_len = cpu_to_le16(bq_len);
2634 rx_ring->sbq_prod_idx = 0;
2635 rx_ring->sbq_curr_idx = 0;
2636 rx_ring->sbq_clean_idx = 0;
2637 rx_ring->sbq_free_cnt = rx_ring->sbq_len;
2639 switch (rx_ring->type) {
2641 /* If there's only one interrupt, then we use
2642 * worker threads to process the outbound
2643 * completion handling rx_rings. We do this so
2644 * they can be run on multiple CPUs. There is
2645 * room to play with this more where we would only
2646 * run in a worker if there are more than x number
2647 * of outbound completions on the queue and more
2648 * than one queue active. Some threshold that
2649 * would indicate a benefit in spite of the cost
2650 * of a context switch.
2651 * If there's more than one interrupt, then the
2652 * outbound completions are processed in the ISR.
2654 if (!test_bit(QL_MSIX_ENABLED, &qdev->flags))
2655 INIT_DELAYED_WORK(&rx_ring->rx_work, ql_tx_clean);
2657 /* With all debug warnings on we see a WARN_ON message
2658 * when we free the skb in the interrupt context.
2660 INIT_DELAYED_WORK(&rx_ring->rx_work, ql_tx_clean);
2662 cqicb->irq_delay = cpu_to_le16(qdev->tx_coalesce_usecs);
2663 cqicb->pkt_delay = cpu_to_le16(qdev->tx_max_coalesced_frames);
2666 INIT_DELAYED_WORK(&rx_ring->rx_work, ql_rx_clean);
2667 cqicb->irq_delay = 0;
2668 cqicb->pkt_delay = 0;
2671 /* Inbound completion handling rx_rings run in
2672 * separate NAPI contexts.
2674 netif_napi_add(qdev->ndev, &rx_ring->napi, ql_napi_poll_msix,
2676 cqicb->irq_delay = cpu_to_le16(qdev->rx_coalesce_usecs);
2677 cqicb->pkt_delay = cpu_to_le16(qdev->rx_max_coalesced_frames);
2680 QPRINTK(qdev, IFUP, DEBUG, "Invalid rx_ring->type = %d.\n",
2683 QPRINTK(qdev, IFUP, DEBUG, "Initializing rx work queue.\n");
2684 err = ql_write_cfg(qdev, cqicb, sizeof(struct cqicb),
2685 CFG_LCQ, rx_ring->cq_id);
2687 QPRINTK(qdev, IFUP, ERR, "Failed to load CQICB.\n");
2693 static int ql_start_tx_ring(struct ql_adapter *qdev, struct tx_ring *tx_ring)
2695 struct wqicb *wqicb = (struct wqicb *)tx_ring;
2696 void __iomem *doorbell_area =
2697 qdev->doorbell_area + (DB_PAGE_SIZE * tx_ring->wq_id);
2698 void *shadow_reg = qdev->tx_ring_shadow_reg_area +
2699 (tx_ring->wq_id * sizeof(u64));
2700 u64 shadow_reg_dma = qdev->tx_ring_shadow_reg_dma +
2701 (tx_ring->wq_id * sizeof(u64));
2705 * Assign doorbell registers for this tx_ring.
2707 /* TX PCI doorbell mem area for tx producer index */
2708 tx_ring->prod_idx_db_reg = (u32 __iomem *) doorbell_area;
2709 tx_ring->prod_idx = 0;
2710 /* TX PCI doorbell mem area + 0x04 */
2711 tx_ring->valid_db_reg = doorbell_area + 0x04;
2714 * Assign shadow registers for this tx_ring.
2716 tx_ring->cnsmr_idx_sh_reg = shadow_reg;
2717 tx_ring->cnsmr_idx_sh_reg_dma = shadow_reg_dma;
2719 wqicb->len = cpu_to_le16(tx_ring->wq_len | Q_LEN_V | Q_LEN_CPP_CONT);
2720 wqicb->flags = cpu_to_le16(Q_FLAGS_LC |
2721 Q_FLAGS_LB | Q_FLAGS_LI | Q_FLAGS_LO);
2722 wqicb->cq_id_rss = cpu_to_le16(tx_ring->cq_id);
2724 wqicb->addr = cpu_to_le64(tx_ring->wq_base_dma);
2726 wqicb->cnsmr_idx_addr = cpu_to_le64(tx_ring->cnsmr_idx_sh_reg_dma);
2728 ql_init_tx_ring(qdev, tx_ring);
2730 err = ql_write_cfg(qdev, wqicb, sizeof(wqicb), CFG_LRQ,
2731 (u16) tx_ring->wq_id);
2733 QPRINTK(qdev, IFUP, ERR, "Failed to load tx_ring.\n");
2736 QPRINTK(qdev, IFUP, DEBUG, "Successfully loaded WQICB.\n");
2740 static void ql_disable_msix(struct ql_adapter *qdev)
2742 if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) {
2743 pci_disable_msix(qdev->pdev);
2744 clear_bit(QL_MSIX_ENABLED, &qdev->flags);
2745 kfree(qdev->msi_x_entry);
2746 qdev->msi_x_entry = NULL;
2747 } else if (test_bit(QL_MSI_ENABLED, &qdev->flags)) {
2748 pci_disable_msi(qdev->pdev);
2749 clear_bit(QL_MSI_ENABLED, &qdev->flags);
2753 static void ql_enable_msix(struct ql_adapter *qdev)
2757 qdev->intr_count = 1;
2758 /* Get the MSIX vectors. */
2759 if (irq_type == MSIX_IRQ) {
2760 /* Try to alloc space for the msix struct,
2761 * if it fails then go to MSI/legacy.
2763 qdev->msi_x_entry = kcalloc(qdev->rx_ring_count,
2764 sizeof(struct msix_entry),
2766 if (!qdev->msi_x_entry) {
2771 for (i = 0; i < qdev->rx_ring_count; i++)
2772 qdev->msi_x_entry[i].entry = i;
2774 if (!pci_enable_msix
2775 (qdev->pdev, qdev->msi_x_entry, qdev->rx_ring_count)) {
2776 set_bit(QL_MSIX_ENABLED, &qdev->flags);
2777 qdev->intr_count = qdev->rx_ring_count;
2778 QPRINTK(qdev, IFUP, DEBUG,
2779 "MSI-X Enabled, got %d vectors.\n",
2783 kfree(qdev->msi_x_entry);
2784 qdev->msi_x_entry = NULL;
2785 QPRINTK(qdev, IFUP, WARNING,
2786 "MSI-X Enable failed, trying MSI.\n");
2791 if (irq_type == MSI_IRQ) {
2792 if (!pci_enable_msi(qdev->pdev)) {
2793 set_bit(QL_MSI_ENABLED, &qdev->flags);
2794 QPRINTK(qdev, IFUP, INFO,
2795 "Running with MSI interrupts.\n");
2800 QPRINTK(qdev, IFUP, DEBUG, "Running with legacy interrupts.\n");
2804 * Here we build the intr_context structures based on
2805 * our rx_ring count and intr vector count.
2806 * The intr_context structure is used to hook each vector
2807 * to possibly different handlers.
2809 static void ql_resolve_queues_to_irqs(struct ql_adapter *qdev)
2812 struct intr_context *intr_context = &qdev->intr_context[0];
2814 ql_enable_msix(qdev);
2816 if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) {
2817 /* Each rx_ring has it's
2818 * own intr_context since we have separate
2819 * vectors for each queue.
2820 * This only true when MSI-X is enabled.
2822 for (i = 0; i < qdev->intr_count; i++, intr_context++) {
2823 qdev->rx_ring[i].irq = i;
2824 intr_context->intr = i;
2825 intr_context->qdev = qdev;
2827 * We set up each vectors enable/disable/read bits so
2828 * there's no bit/mask calculations in the critical path.
2830 intr_context->intr_en_mask =
2831 INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK |
2832 INTR_EN_TYPE_ENABLE | INTR_EN_IHD_MASK | INTR_EN_IHD
2834 intr_context->intr_dis_mask =
2835 INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK |
2836 INTR_EN_TYPE_DISABLE | INTR_EN_IHD_MASK |
2838 intr_context->intr_read_mask =
2839 INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK |
2840 INTR_EN_TYPE_READ | INTR_EN_IHD_MASK | INTR_EN_IHD |
2845 * Default queue handles bcast/mcast plus
2846 * async events. Needs buffers.
2848 intr_context->handler = qlge_isr;
2849 sprintf(intr_context->name, "%s-default-queue",
2851 } else if (i < qdev->rss_ring_first_cq_id) {
2853 * Outbound queue is for outbound completions only.
2855 intr_context->handler = qlge_msix_tx_isr;
2856 sprintf(intr_context->name, "%s-tx-%d",
2857 qdev->ndev->name, i);
2860 * Inbound queues handle unicast frames only.
2862 intr_context->handler = qlge_msix_rx_isr;
2863 sprintf(intr_context->name, "%s-rx-%d",
2864 qdev->ndev->name, i);
2869 * All rx_rings use the same intr_context since
2870 * there is only one vector.
2872 intr_context->intr = 0;
2873 intr_context->qdev = qdev;
2875 * We set up each vectors enable/disable/read bits so
2876 * there's no bit/mask calculations in the critical path.
2878 intr_context->intr_en_mask =
2879 INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | INTR_EN_TYPE_ENABLE;
2880 intr_context->intr_dis_mask =
2881 INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK |
2882 INTR_EN_TYPE_DISABLE;
2883 intr_context->intr_read_mask =
2884 INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | INTR_EN_TYPE_READ;
2886 * Single interrupt means one handler for all rings.
2888 intr_context->handler = qlge_isr;
2889 sprintf(intr_context->name, "%s-single_irq", qdev->ndev->name);
2890 for (i = 0; i < qdev->rx_ring_count; i++)
2891 qdev->rx_ring[i].irq = 0;
2895 static void ql_free_irq(struct ql_adapter *qdev)
2898 struct intr_context *intr_context = &qdev->intr_context[0];
2900 for (i = 0; i < qdev->intr_count; i++, intr_context++) {
2901 if (intr_context->hooked) {
2902 if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) {
2903 free_irq(qdev->msi_x_entry[i].vector,
2905 QPRINTK(qdev, IFDOWN, DEBUG,
2906 "freeing msix interrupt %d.\n", i);
2908 free_irq(qdev->pdev->irq, &qdev->rx_ring[0]);
2909 QPRINTK(qdev, IFDOWN, DEBUG,
2910 "freeing msi interrupt %d.\n", i);
2914 ql_disable_msix(qdev);
2917 static int ql_request_irq(struct ql_adapter *qdev)
2921 struct pci_dev *pdev = qdev->pdev;
2922 struct intr_context *intr_context = &qdev->intr_context[0];
2924 ql_resolve_queues_to_irqs(qdev);
2926 for (i = 0; i < qdev->intr_count; i++, intr_context++) {
2927 atomic_set(&intr_context->irq_cnt, 0);
2928 if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) {
2929 status = request_irq(qdev->msi_x_entry[i].vector,
2930 intr_context->handler,
2935 QPRINTK(qdev, IFUP, ERR,
2936 "Failed request for MSIX interrupt %d.\n",
2940 QPRINTK(qdev, IFUP, DEBUG,
2941 "Hooked intr %d, queue type %s%s%s, with name %s.\n",
2943 qdev->rx_ring[i].type ==
2944 DEFAULT_Q ? "DEFAULT_Q" : "",
2945 qdev->rx_ring[i].type ==
2947 qdev->rx_ring[i].type ==
2948 RX_Q ? "RX_Q" : "", intr_context->name);
2951 QPRINTK(qdev, IFUP, DEBUG,
2952 "trying msi or legacy interrupts.\n");
2953 QPRINTK(qdev, IFUP, DEBUG,
2954 "%s: irq = %d.\n", __func__, pdev->irq);
2955 QPRINTK(qdev, IFUP, DEBUG,
2956 "%s: context->name = %s.\n", __func__,
2957 intr_context->name);
2958 QPRINTK(qdev, IFUP, DEBUG,
2959 "%s: dev_id = 0x%p.\n", __func__,
2962 request_irq(pdev->irq, qlge_isr,
2963 test_bit(QL_MSI_ENABLED,
2965 flags) ? 0 : IRQF_SHARED,
2966 intr_context->name, &qdev->rx_ring[0]);
2970 QPRINTK(qdev, IFUP, ERR,
2971 "Hooked intr %d, queue type %s%s%s, with name %s.\n",
2973 qdev->rx_ring[0].type ==
2974 DEFAULT_Q ? "DEFAULT_Q" : "",
2975 qdev->rx_ring[0].type == TX_Q ? "TX_Q" : "",
2976 qdev->rx_ring[0].type == RX_Q ? "RX_Q" : "",
2977 intr_context->name);
2979 intr_context->hooked = 1;
2983 QPRINTK(qdev, IFUP, ERR, "Failed to get the interrupts!!!/n");
2988 static int ql_start_rss(struct ql_adapter *qdev)
2990 struct ricb *ricb = &qdev->ricb;
2993 u8 *hash_id = (u8 *) ricb->hash_cq_id;
2995 memset((void *)ricb, 0, sizeof(ricb));
2997 ricb->base_cq = qdev->rss_ring_first_cq_id | RSS_L4K;
2999 (RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RI4 | RSS_RI6 | RSS_RT4 |
3001 ricb->mask = cpu_to_le16(qdev->rss_ring_count - 1);
3004 * Fill out the Indirection Table.
3006 for (i = 0; i < 256; i++)
3007 hash_id[i] = i & (qdev->rss_ring_count - 1);
3010 * Random values for the IPv6 and IPv4 Hash Keys.
3012 get_random_bytes((void *)&ricb->ipv6_hash_key[0], 40);
3013 get_random_bytes((void *)&ricb->ipv4_hash_key[0], 16);
3015 QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n");
3017 status = ql_write_cfg(qdev, ricb, sizeof(ricb), CFG_LR, 0);
3019 QPRINTK(qdev, IFUP, ERR, "Failed to load RICB.\n");
3022 QPRINTK(qdev, IFUP, DEBUG, "Successfully loaded RICB.\n");
3026 /* Initialize the frame-to-queue routing. */
3027 static int ql_route_initialize(struct ql_adapter *qdev)
3032 status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
3036 /* Clear all the entries in the routing table. */
3037 for (i = 0; i < 16; i++) {
3038 status = ql_set_routing_reg(qdev, i, 0, 0);
3040 QPRINTK(qdev, IFUP, ERR,
3041 "Failed to init routing register for CAM packets.\n");
3046 status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1);
3048 QPRINTK(qdev, IFUP, ERR,
3049 "Failed to init routing register for error packets.\n");
3052 status = ql_set_routing_reg(qdev, RT_IDX_BCAST_SLOT, RT_IDX_BCAST, 1);
3054 QPRINTK(qdev, IFUP, ERR,
3055 "Failed to init routing register for broadcast packets.\n");
3058 /* If we have more than one inbound queue, then turn on RSS in the
3061 if (qdev->rss_ring_count > 1) {
3062 status = ql_set_routing_reg(qdev, RT_IDX_RSS_MATCH_SLOT,
3063 RT_IDX_RSS_MATCH, 1);
3065 QPRINTK(qdev, IFUP, ERR,
3066 "Failed to init routing register for MATCH RSS packets.\n");
3071 status = ql_set_routing_reg(qdev, RT_IDX_CAM_HIT_SLOT,
3074 QPRINTK(qdev, IFUP, ERR,
3075 "Failed to init routing register for CAM packets.\n");
3077 ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
3081 int ql_cam_route_initialize(struct ql_adapter *qdev)
3085 status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
3088 status = ql_set_mac_addr_reg(qdev, (u8 *) qdev->ndev->perm_addr,
3089 MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
3090 ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
3092 QPRINTK(qdev, IFUP, ERR, "Failed to init mac address.\n");
3096 status = ql_route_initialize(qdev);
3098 QPRINTK(qdev, IFUP, ERR, "Failed to init routing table.\n");
3103 static int ql_adapter_initialize(struct ql_adapter *qdev)
3110 * Set up the System register to halt on errors.
3112 value = SYS_EFE | SYS_FAE;
3114 ql_write32(qdev, SYS, mask | value);
3116 /* Set the default queue, and VLAN behavior. */
3117 value = NIC_RCV_CFG_DFQ | NIC_RCV_CFG_RV;
3118 mask = NIC_RCV_CFG_DFQ_MASK | (NIC_RCV_CFG_RV << 16);
3119 ql_write32(qdev, NIC_RCV_CFG, (mask | value));
3121 /* Set the MPI interrupt to enabled. */
3122 ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
3124 /* Enable the function, set pagesize, enable error checking. */
3125 value = FSC_FE | FSC_EPC_INBOUND | FSC_EPC_OUTBOUND |
3126 FSC_EC | FSC_VM_PAGE_4K | FSC_SH;
3128 /* Set/clear header splitting. */
3129 mask = FSC_VM_PAGESIZE_MASK |
3130 FSC_DBL_MASK | FSC_DBRST_MASK | (value << 16);
3131 ql_write32(qdev, FSC, mask | value);
3133 ql_write32(qdev, SPLT_HDR, SPLT_HDR_EP |
3134 min(SMALL_BUFFER_SIZE, MAX_SPLIT_SIZE));
3136 /* Start up the rx queues. */
3137 for (i = 0; i < qdev->rx_ring_count; i++) {
3138 status = ql_start_rx_ring(qdev, &qdev->rx_ring[i]);
3140 QPRINTK(qdev, IFUP, ERR,
3141 "Failed to start rx ring[%d].\n", i);
3146 /* If there is more than one inbound completion queue
3147 * then download a RICB to configure RSS.
3149 if (qdev->rss_ring_count > 1) {
3150 status = ql_start_rss(qdev);
3152 QPRINTK(qdev, IFUP, ERR, "Failed to start RSS.\n");
3157 /* Start up the tx queues. */
3158 for (i = 0; i < qdev->tx_ring_count; i++) {
3159 status = ql_start_tx_ring(qdev, &qdev->tx_ring[i]);
3161 QPRINTK(qdev, IFUP, ERR,
3162 "Failed to start tx ring[%d].\n", i);
3167 /* Initialize the port and set the max framesize. */
3168 status = qdev->nic_ops->port_initialize(qdev);
3170 QPRINTK(qdev, IFUP, ERR, "Failed to start port.\n");
3174 /* Set up the MAC address and frame routing filter. */
3175 status = ql_cam_route_initialize(qdev);
3177 QPRINTK(qdev, IFUP, ERR,
3178 "Failed to init CAM/Routing tables.\n");
3182 /* Start NAPI for the RSS queues. */
3183 for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++) {
3184 QPRINTK(qdev, IFUP, DEBUG, "Enabling NAPI for rx_ring[%d].\n",
3186 napi_enable(&qdev->rx_ring[i].napi);
3192 /* Issue soft reset to chip. */
3193 static int ql_adapter_reset(struct ql_adapter *qdev)
3197 unsigned long end_jiffies = jiffies +
3198 max((unsigned long)1, usecs_to_jiffies(30));
3200 ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
3203 value = ql_read32(qdev, RST_FO);
3204 if ((value & RST_FO_FR) == 0)
3207 } while (time_before(jiffies, end_jiffies));
3209 if (value & RST_FO_FR) {
3210 QPRINTK(qdev, IFDOWN, ERR,
3211 "ETIMEOUT!!! errored out of resetting the chip!\n");
3212 status = -ETIMEDOUT;
3218 static void ql_display_dev_info(struct net_device *ndev)
3220 struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
3222 QPRINTK(qdev, PROBE, INFO,
3223 "Function #%d, Port %d, NIC Roll %d, NIC Rev = %d, "
3224 "XG Roll = %d, XG Rev = %d.\n",
3227 qdev->chip_rev_id & 0x0000000f,
3228 qdev->chip_rev_id >> 4 & 0x0000000f,
3229 qdev->chip_rev_id >> 8 & 0x0000000f,
3230 qdev->chip_rev_id >> 12 & 0x0000000f);
3231 QPRINTK(qdev, PROBE, INFO, "MAC address %pM\n", ndev->dev_addr);
3234 static int ql_adapter_down(struct ql_adapter *qdev)
3237 struct rx_ring *rx_ring;
3239 netif_carrier_off(qdev->ndev);
3241 /* Don't kill the reset worker thread if we
3242 * are in the process of recovery.
3244 if (test_bit(QL_ADAPTER_UP, &qdev->flags))
3245 cancel_delayed_work_sync(&qdev->asic_reset_work);
3246 cancel_delayed_work_sync(&qdev->mpi_reset_work);
3247 cancel_delayed_work_sync(&qdev->mpi_work);
3248 cancel_delayed_work_sync(&qdev->mpi_idc_work);
3249 cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
3251 /* The default queue at index 0 is always processed in
3254 cancel_delayed_work_sync(&qdev->rx_ring[0].rx_work);
3256 /* The rest of the rx_rings are processed in
3257 * a workqueue only if it's a single interrupt
3258 * environment (MSI/Legacy).
3260 for (i = 1; i < qdev->rx_ring_count; i++) {
3261 rx_ring = &qdev->rx_ring[i];
3262 /* Only the RSS rings use NAPI on multi irq
3263 * environment. Outbound completion processing
3264 * is done in interrupt context.
3266 if (i >= qdev->rss_ring_first_cq_id) {
3267 napi_disable(&rx_ring->napi);
3269 cancel_delayed_work_sync(&rx_ring->rx_work);
3273 clear_bit(QL_ADAPTER_UP, &qdev->flags);
3275 ql_disable_interrupts(qdev);
3277 ql_tx_ring_clean(qdev);
3279 /* Call netif_napi_del() from common point.
3281 for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++)
3282 netif_napi_del(&qdev->rx_ring[i].napi);
3284 ql_free_rx_buffers(qdev);
3286 spin_lock(&qdev->hw_lock);
3287 status = ql_adapter_reset(qdev);
3289 QPRINTK(qdev, IFDOWN, ERR, "reset(func #%d) FAILED!\n",
3291 spin_unlock(&qdev->hw_lock);
3295 static int ql_adapter_up(struct ql_adapter *qdev)
3299 err = ql_adapter_initialize(qdev);
3301 QPRINTK(qdev, IFUP, INFO, "Unable to initialize adapter.\n");
3304 set_bit(QL_ADAPTER_UP, &qdev->flags);
3305 ql_alloc_rx_buffers(qdev);
3306 if ((ql_read32(qdev, STS) & qdev->port_init))
3307 netif_carrier_on(qdev->ndev);
3308 ql_enable_interrupts(qdev);
3309 ql_enable_all_completion_interrupts(qdev);
3310 netif_tx_start_all_queues(qdev->ndev);
3314 ql_adapter_reset(qdev);
3318 static void ql_release_adapter_resources(struct ql_adapter *qdev)
3320 ql_free_mem_resources(qdev);
3324 static int ql_get_adapter_resources(struct ql_adapter *qdev)
3328 if (ql_alloc_mem_resources(qdev)) {
3329 QPRINTK(qdev, IFUP, ERR, "Unable to allocate memory.\n");
3332 status = ql_request_irq(qdev);
3337 ql_free_mem_resources(qdev);
3341 static int qlge_close(struct net_device *ndev)
3343 struct ql_adapter *qdev = netdev_priv(ndev);
3346 * Wait for device to recover from a reset.
3347 * (Rarely happens, but possible.)
3349 while (!test_bit(QL_ADAPTER_UP, &qdev->flags))
3351 ql_adapter_down(qdev);
3352 ql_release_adapter_resources(qdev);
3356 static int ql_configure_rings(struct ql_adapter *qdev)
3359 struct rx_ring *rx_ring;
3360 struct tx_ring *tx_ring;
3361 int cpu_cnt = num_online_cpus();
3364 * For each processor present we allocate one
3365 * rx_ring for outbound completions, and one
3366 * rx_ring for inbound completions. Plus there is
3367 * always the one default queue. For the CPU
3368 * counts we end up with the following rx_rings:
3370 * one default queue +
3371 * (CPU count * outbound completion rx_ring) +
3372 * (CPU count * inbound (RSS) completion rx_ring)
3373 * To keep it simple we limit the total number of
3374 * queues to < 32, so we truncate CPU to 8.
3375 * This limitation can be removed when requested.
3378 if (cpu_cnt > MAX_CPUS)
3382 * rx_ring[0] is always the default queue.
3384 /* Allocate outbound completion ring for each CPU. */
3385 qdev->tx_ring_count = cpu_cnt;
3386 /* Allocate inbound completion (RSS) ring for each CPU. */
3387 qdev->rss_ring_count = cpu_cnt;
3388 /* cq_id for the first inbound ring handler. */
3389 qdev->rss_ring_first_cq_id = cpu_cnt + 1;
3391 * qdev->rx_ring_count:
3392 * Total number of rx_rings. This includes the one
3393 * default queue, a number of outbound completion
3394 * handler rx_rings, and the number of inbound
3395 * completion handler rx_rings.
3397 qdev->rx_ring_count = qdev->tx_ring_count + qdev->rss_ring_count + 1;
3399 for (i = 0; i < qdev->tx_ring_count; i++) {
3400 tx_ring = &qdev->tx_ring[i];
3401 memset((void *)tx_ring, 0, sizeof(tx_ring));
3402 tx_ring->qdev = qdev;
3404 tx_ring->wq_len = qdev->tx_ring_size;
3406 tx_ring->wq_len * sizeof(struct ob_mac_iocb_req);
3409 * The completion queue ID for the tx rings start
3410 * immediately after the default Q ID, which is zero.
3412 tx_ring->cq_id = i + 1;
3415 for (i = 0; i < qdev->rx_ring_count; i++) {
3416 rx_ring = &qdev->rx_ring[i];
3417 memset((void *)rx_ring, 0, sizeof(rx_ring));
3418 rx_ring->qdev = qdev;
3420 rx_ring->cpu = i % cpu_cnt; /* CPU to run handler on. */
3421 if (i == 0) { /* Default queue at index 0. */
3423 * Default queue handles bcast/mcast plus
3424 * async events. Needs buffers.
3426 rx_ring->cq_len = qdev->rx_ring_size;
3428 rx_ring->cq_len * sizeof(struct ql_net_rsp_iocb);
3429 rx_ring->lbq_len = NUM_LARGE_BUFFERS;
3431 rx_ring->lbq_len * sizeof(__le64);
3432 rx_ring->lbq_buf_size = LARGE_BUFFER_SIZE;
3433 rx_ring->sbq_len = NUM_SMALL_BUFFERS;
3435 rx_ring->sbq_len * sizeof(__le64);
3436 rx_ring->sbq_buf_size = SMALL_BUFFER_SIZE * 2;
3437 rx_ring->type = DEFAULT_Q;
3438 } else if (i < qdev->rss_ring_first_cq_id) {
3440 * Outbound queue handles outbound completions only.
3442 /* outbound cq is same size as tx_ring it services. */
3443 rx_ring->cq_len = qdev->tx_ring_size;
3445 rx_ring->cq_len * sizeof(struct ql_net_rsp_iocb);
3446 rx_ring->lbq_len = 0;
3447 rx_ring->lbq_size = 0;
3448 rx_ring->lbq_buf_size = 0;
3449 rx_ring->sbq_len = 0;
3450 rx_ring->sbq_size = 0;
3451 rx_ring->sbq_buf_size = 0;
3452 rx_ring->type = TX_Q;
3453 } else { /* Inbound completions (RSS) queues */
3455 * Inbound queues handle unicast frames only.
3457 rx_ring->cq_len = qdev->rx_ring_size;
3459 rx_ring->cq_len * sizeof(struct ql_net_rsp_iocb);
3460 rx_ring->lbq_len = NUM_LARGE_BUFFERS;
3462 rx_ring->lbq_len * sizeof(__le64);
3463 rx_ring->lbq_buf_size = LARGE_BUFFER_SIZE;
3464 rx_ring->sbq_len = NUM_SMALL_BUFFERS;
3466 rx_ring->sbq_len * sizeof(__le64);
3467 rx_ring->sbq_buf_size = SMALL_BUFFER_SIZE * 2;
3468 rx_ring->type = RX_Q;
3474 static int qlge_open(struct net_device *ndev)
3477 struct ql_adapter *qdev = netdev_priv(ndev);
3479 err = ql_configure_rings(qdev);
3483 err = ql_get_adapter_resources(qdev);
3487 err = ql_adapter_up(qdev);
3494 ql_release_adapter_resources(qdev);
3498 static int qlge_change_mtu(struct net_device *ndev, int new_mtu)
3500 struct ql_adapter *qdev = netdev_priv(ndev);
3502 if (ndev->mtu == 1500 && new_mtu == 9000) {
3503 QPRINTK(qdev, IFUP, ERR, "Changing to jumbo MTU.\n");
3504 queue_delayed_work(qdev->workqueue,
3505 &qdev->mpi_port_cfg_work, 0);
3506 } else if (ndev->mtu == 9000 && new_mtu == 1500) {
3507 QPRINTK(qdev, IFUP, ERR, "Changing to normal MTU.\n");
3508 } else if ((ndev->mtu == 1500 && new_mtu == 1500) ||
3509 (ndev->mtu == 9000 && new_mtu == 9000)) {
3513 ndev->mtu = new_mtu;
3517 static struct net_device_stats *qlge_get_stats(struct net_device
3520 struct ql_adapter *qdev = netdev_priv(ndev);
3521 return &qdev->stats;
3524 static void qlge_set_multicast_list(struct net_device *ndev)
3526 struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
3527 struct dev_mc_list *mc_ptr;
3530 status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
3533 spin_lock(&qdev->hw_lock);
3535 * Set or clear promiscuous mode if a
3536 * transition is taking place.
3538 if (ndev->flags & IFF_PROMISC) {
3539 if (!test_bit(QL_PROMISCUOUS, &qdev->flags)) {
3540 if (ql_set_routing_reg
3541 (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 1)) {
3542 QPRINTK(qdev, HW, ERR,
3543 "Failed to set promiscous mode.\n");
3545 set_bit(QL_PROMISCUOUS, &qdev->flags);
3549 if (test_bit(QL_PROMISCUOUS, &qdev->flags)) {
3550 if (ql_set_routing_reg
3551 (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 0)) {
3552 QPRINTK(qdev, HW, ERR,
3553 "Failed to clear promiscous mode.\n");
3555 clear_bit(QL_PROMISCUOUS, &qdev->flags);
3561 * Set or clear all multicast mode if a
3562 * transition is taking place.
3564 if ((ndev->flags & IFF_ALLMULTI) ||
3565 (ndev->mc_count > MAX_MULTICAST_ENTRIES)) {
3566 if (!test_bit(QL_ALLMULTI, &qdev->flags)) {
3567 if (ql_set_routing_reg
3568 (qdev, RT_IDX_ALLMULTI_SLOT, RT_IDX_MCAST, 1)) {
3569 QPRINTK(qdev, HW, ERR,
3570 "Failed to set all-multi mode.\n");
3572 set_bit(QL_ALLMULTI, &qdev->flags);
3576 if (test_bit(QL_ALLMULTI, &qdev->flags)) {
3577 if (ql_set_routing_reg
3578 (qdev, RT_IDX_ALLMULTI_SLOT, RT_IDX_MCAST, 0)) {
3579 QPRINTK(qdev, HW, ERR,
3580 "Failed to clear all-multi mode.\n");
3582 clear_bit(QL_ALLMULTI, &qdev->flags);
3587 if (ndev->mc_count) {
3588 status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
3591 for (i = 0, mc_ptr = ndev->mc_list; mc_ptr;
3592 i++, mc_ptr = mc_ptr->next)
3593 if (ql_set_mac_addr_reg(qdev, (u8 *) mc_ptr->dmi_addr,
3594 MAC_ADDR_TYPE_MULTI_MAC, i)) {
3595 QPRINTK(qdev, HW, ERR,
3596 "Failed to loadmulticast address.\n");
3597 ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
3600 ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
3601 if (ql_set_routing_reg
3602 (qdev, RT_IDX_MCAST_MATCH_SLOT, RT_IDX_MCAST_MATCH, 1)) {
3603 QPRINTK(qdev, HW, ERR,
3604 "Failed to set multicast match mode.\n");
3606 set_bit(QL_ALLMULTI, &qdev->flags);
3610 spin_unlock(&qdev->hw_lock);
3611 ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
3614 static int qlge_set_mac_address(struct net_device *ndev, void *p)
3616 struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
3617 struct sockaddr *addr = p;
3620 if (netif_running(ndev))
3623 if (!is_valid_ether_addr(addr->sa_data))
3624 return -EADDRNOTAVAIL;
3625 memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
3627 status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
3630 spin_lock(&qdev->hw_lock);
3631 status = ql_set_mac_addr_reg(qdev, (u8 *) ndev->dev_addr,
3632 MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
3633 spin_unlock(&qdev->hw_lock);
3635 QPRINTK(qdev, HW, ERR, "Failed to load MAC address.\n");
3636 ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
3640 static void qlge_tx_timeout(struct net_device *ndev)
3642 struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
3643 ql_queue_asic_error(qdev);
3646 static void ql_asic_reset_work(struct work_struct *work)
3648 struct ql_adapter *qdev =
3649 container_of(work, struct ql_adapter, asic_reset_work.work);
3652 status = ql_adapter_down(qdev);
3656 status = ql_adapter_up(qdev);
3662 QPRINTK(qdev, IFUP, ALERT,
3663 "Driver up/down cycle failed, closing device\n");
3665 set_bit(QL_ADAPTER_UP, &qdev->flags);
3666 dev_close(qdev->ndev);
3670 static struct nic_operations qla8012_nic_ops = {
3671 .get_flash = ql_get_8012_flash_params,
3672 .port_initialize = ql_8012_port_initialize,
3675 static struct nic_operations qla8000_nic_ops = {
3676 .get_flash = ql_get_8000_flash_params,
3677 .port_initialize = ql_8000_port_initialize,
3680 /* Find the pcie function number for the other NIC
3681 * on this chip. Since both NIC functions share a
3682 * common firmware we have the lowest enabled function
3683 * do any common work. Examples would be resetting
3684 * after a fatal firmware error, or doing a firmware
3687 static int ql_get_alt_pcie_func(struct ql_adapter *qdev)
3691 u32 nic_func1, nic_func2;
3693 status = ql_read_mpi_reg(qdev, MPI_TEST_FUNC_PORT_CFG,
3698 nic_func1 = ((temp >> MPI_TEST_NIC1_FUNC_SHIFT) &
3699 MPI_TEST_NIC_FUNC_MASK);
3700 nic_func2 = ((temp >> MPI_TEST_NIC2_FUNC_SHIFT) &
3701 MPI_TEST_NIC_FUNC_MASK);
3703 if (qdev->func == nic_func1)
3704 qdev->alt_func = nic_func2;
3705 else if (qdev->func == nic_func2)
3706 qdev->alt_func = nic_func1;
3713 static int ql_get_board_info(struct ql_adapter *qdev)
3717 (ql_read32(qdev, STS) & STS_FUNC_ID_MASK) >> STS_FUNC_ID_SHIFT;
3721 status = ql_get_alt_pcie_func(qdev);
3725 qdev->port = (qdev->func < qdev->alt_func) ? 0 : 1;
3727 qdev->xg_sem_mask = SEM_XGMAC1_MASK;
3728 qdev->port_link_up = STS_PL1;
3729 qdev->port_init = STS_PI1;
3730 qdev->mailbox_in = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC2_MBI;
3731 qdev->mailbox_out = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC2_MBO;
3733 qdev->xg_sem_mask = SEM_XGMAC0_MASK;
3734 qdev->port_link_up = STS_PL0;
3735 qdev->port_init = STS_PI0;
3736 qdev->mailbox_in = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC0_MBI;
3737 qdev->mailbox_out = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC0_MBO;
3739 qdev->chip_rev_id = ql_read32(qdev, REV_ID);
3740 qdev->device_id = qdev->pdev->device;
3741 if (qdev->device_id == QLGE_DEVICE_ID_8012)
3742 qdev->nic_ops = &qla8012_nic_ops;
3743 else if (qdev->device_id == QLGE_DEVICE_ID_8000)
3744 qdev->nic_ops = &qla8000_nic_ops;
3748 static void ql_release_all(struct pci_dev *pdev)
3750 struct net_device *ndev = pci_get_drvdata(pdev);
3751 struct ql_adapter *qdev = netdev_priv(ndev);
3753 if (qdev->workqueue) {
3754 destroy_workqueue(qdev->workqueue);
3755 qdev->workqueue = NULL;
3757 if (qdev->q_workqueue) {
3758 destroy_workqueue(qdev->q_workqueue);
3759 qdev->q_workqueue = NULL;
3762 iounmap(qdev->reg_base);
3763 if (qdev->doorbell_area)
3764 iounmap(qdev->doorbell_area);
3765 pci_release_regions(pdev);
3766 pci_set_drvdata(pdev, NULL);
3769 static int __devinit ql_init_device(struct pci_dev *pdev,
3770 struct net_device *ndev, int cards_found)
3772 struct ql_adapter *qdev = netdev_priv(ndev);
3776 memset((void *)qdev, 0, sizeof(qdev));
3777 err = pci_enable_device(pdev);
3779 dev_err(&pdev->dev, "PCI device enable failed.\n");
3783 pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
3785 dev_err(&pdev->dev, PFX "Cannot find PCI Express capability, "
3789 pci_read_config_word(pdev, pos + PCI_EXP_DEVCTL, &val16);
3790 val16 &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
3791 val16 |= (PCI_EXP_DEVCTL_CERE |
3792 PCI_EXP_DEVCTL_NFERE |
3793 PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE);
3794 pci_write_config_word(pdev, pos + PCI_EXP_DEVCTL, val16);
3797 err = pci_request_regions(pdev, DRV_NAME);
3799 dev_err(&pdev->dev, "PCI region request failed.\n");
3803 pci_set_master(pdev);
3804 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
3805 set_bit(QL_DMA64, &qdev->flags);
3806 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
3808 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3810 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
3814 dev_err(&pdev->dev, "No usable DMA configuration.\n");
3818 pci_set_drvdata(pdev, ndev);
3820 ioremap_nocache(pci_resource_start(pdev, 1),
3821 pci_resource_len(pdev, 1));
3822 if (!qdev->reg_base) {
3823 dev_err(&pdev->dev, "Register mapping failed.\n");
3828 qdev->doorbell_area_size = pci_resource_len(pdev, 3);
3829 qdev->doorbell_area =
3830 ioremap_nocache(pci_resource_start(pdev, 3),
3831 pci_resource_len(pdev, 3));
3832 if (!qdev->doorbell_area) {
3833 dev_err(&pdev->dev, "Doorbell register mapping failed.\n");
3840 err = ql_get_board_info(qdev);
3842 dev_err(&pdev->dev, "Register access failed.\n");
3846 qdev->msg_enable = netif_msg_init(debug, default_msg);
3847 spin_lock_init(&qdev->hw_lock);
3848 spin_lock_init(&qdev->stats_lock);
3850 /* make sure the EEPROM is good */
3851 err = qdev->nic_ops->get_flash(qdev);
3853 dev_err(&pdev->dev, "Invalid FLASH.\n");
3857 memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
3859 /* Set up the default ring sizes. */
3860 qdev->tx_ring_size = NUM_TX_RING_ENTRIES;
3861 qdev->rx_ring_size = NUM_RX_RING_ENTRIES;
3863 /* Set up the coalescing parameters. */
3864 qdev->rx_coalesce_usecs = DFLT_COALESCE_WAIT;
3865 qdev->tx_coalesce_usecs = DFLT_COALESCE_WAIT;
3866 qdev->rx_max_coalesced_frames = DFLT_INTER_FRAME_WAIT;
3867 qdev->tx_max_coalesced_frames = DFLT_INTER_FRAME_WAIT;
3870 * Set up the operating parameters.
3874 qdev->q_workqueue = create_workqueue(ndev->name);
3875 qdev->workqueue = create_singlethread_workqueue(ndev->name);
3876 INIT_DELAYED_WORK(&qdev->asic_reset_work, ql_asic_reset_work);
3877 INIT_DELAYED_WORK(&qdev->mpi_reset_work, ql_mpi_reset_work);
3878 INIT_DELAYED_WORK(&qdev->mpi_work, ql_mpi_work);
3879 INIT_DELAYED_WORK(&qdev->mpi_port_cfg_work, ql_mpi_port_cfg_work);
3880 INIT_DELAYED_WORK(&qdev->mpi_idc_work, ql_mpi_idc_work);
3881 mutex_init(&qdev->mpi_mutex);
3882 init_completion(&qdev->ide_completion);
3885 dev_info(&pdev->dev, "%s\n", DRV_STRING);
3886 dev_info(&pdev->dev, "Driver name: %s, Version: %s.\n",
3887 DRV_NAME, DRV_VERSION);
3891 ql_release_all(pdev);
3892 pci_disable_device(pdev);
3897 static const struct net_device_ops qlge_netdev_ops = {
3898 .ndo_open = qlge_open,
3899 .ndo_stop = qlge_close,
3900 .ndo_start_xmit = qlge_send,
3901 .ndo_change_mtu = qlge_change_mtu,
3902 .ndo_get_stats = qlge_get_stats,
3903 .ndo_set_multicast_list = qlge_set_multicast_list,
3904 .ndo_set_mac_address = qlge_set_mac_address,
3905 .ndo_validate_addr = eth_validate_addr,
3906 .ndo_tx_timeout = qlge_tx_timeout,
3907 .ndo_vlan_rx_register = ql_vlan_rx_register,
3908 .ndo_vlan_rx_add_vid = ql_vlan_rx_add_vid,
3909 .ndo_vlan_rx_kill_vid = ql_vlan_rx_kill_vid,
3912 static int __devinit qlge_probe(struct pci_dev *pdev,
3913 const struct pci_device_id *pci_entry)
3915 struct net_device *ndev = NULL;
3916 struct ql_adapter *qdev = NULL;
3917 static int cards_found = 0;
3920 ndev = alloc_etherdev_mq(sizeof(struct ql_adapter),
3921 min(MAX_CPUS, (int)num_online_cpus()));
3925 err = ql_init_device(pdev, ndev, cards_found);
3931 qdev = netdev_priv(ndev);
3932 SET_NETDEV_DEV(ndev, &pdev->dev);
3939 | NETIF_F_HW_VLAN_TX
3940 | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER);
3941 ndev->features |= NETIF_F_GRO;
3943 if (test_bit(QL_DMA64, &qdev->flags))
3944 ndev->features |= NETIF_F_HIGHDMA;
3947 * Set up net_device structure.
3949 ndev->tx_queue_len = qdev->tx_ring_size;
3950 ndev->irq = pdev->irq;
3952 ndev->netdev_ops = &qlge_netdev_ops;
3953 SET_ETHTOOL_OPS(ndev, &qlge_ethtool_ops);
3954 ndev->watchdog_timeo = 10 * HZ;
3956 err = register_netdev(ndev);
3958 dev_err(&pdev->dev, "net device registration failed.\n");
3959 ql_release_all(pdev);
3960 pci_disable_device(pdev);
3963 netif_carrier_off(ndev);
3964 ql_display_dev_info(ndev);
3969 static void __devexit qlge_remove(struct pci_dev *pdev)
3971 struct net_device *ndev = pci_get_drvdata(pdev);
3972 unregister_netdev(ndev);
3973 ql_release_all(pdev);
3974 pci_disable_device(pdev);
3979 * This callback is called by the PCI subsystem whenever
3980 * a PCI bus error is detected.
3982 static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev,
3983 enum pci_channel_state state)
3985 struct net_device *ndev = pci_get_drvdata(pdev);
3986 struct ql_adapter *qdev = netdev_priv(ndev);
3988 if (netif_running(ndev))
3989 ql_adapter_down(qdev);
3991 pci_disable_device(pdev);
3993 /* Request a slot reset. */
3994 return PCI_ERS_RESULT_NEED_RESET;
3998 * This callback is called after the PCI buss has been reset.
3999 * Basically, this tries to restart the card from scratch.
4000 * This is a shortened version of the device probe/discovery code,
4001 * it resembles the first-half of the () routine.
4003 static pci_ers_result_t qlge_io_slot_reset(struct pci_dev *pdev)
4005 struct net_device *ndev = pci_get_drvdata(pdev);
4006 struct ql_adapter *qdev = netdev_priv(ndev);
4008 if (pci_enable_device(pdev)) {
4009 QPRINTK(qdev, IFUP, ERR,
4010 "Cannot re-enable PCI device after reset.\n");
4011 return PCI_ERS_RESULT_DISCONNECT;
4014 pci_set_master(pdev);
4016 netif_carrier_off(ndev);
4017 ql_adapter_reset(qdev);
4019 /* Make sure the EEPROM is good */
4020 memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
4022 if (!is_valid_ether_addr(ndev->perm_addr)) {
4023 QPRINTK(qdev, IFUP, ERR, "After reset, invalid MAC address.\n");
4024 return PCI_ERS_RESULT_DISCONNECT;
4027 return PCI_ERS_RESULT_RECOVERED;
4030 static void qlge_io_resume(struct pci_dev *pdev)
4032 struct net_device *ndev = pci_get_drvdata(pdev);
4033 struct ql_adapter *qdev = netdev_priv(ndev);
4035 pci_set_master(pdev);
4037 if (netif_running(ndev)) {
4038 if (ql_adapter_up(qdev)) {
4039 QPRINTK(qdev, IFUP, ERR,
4040 "Device initialization failed after reset.\n");
4045 netif_device_attach(ndev);
4048 static struct pci_error_handlers qlge_err_handler = {
4049 .error_detected = qlge_io_error_detected,
4050 .slot_reset = qlge_io_slot_reset,
4051 .resume = qlge_io_resume,
4054 static int qlge_suspend(struct pci_dev *pdev, pm_message_t state)
4056 struct net_device *ndev = pci_get_drvdata(pdev);
4057 struct ql_adapter *qdev = netdev_priv(ndev);
4060 netif_device_detach(ndev);
4062 if (netif_running(ndev)) {
4063 err = ql_adapter_down(qdev);
4068 err = pci_save_state(pdev);
4072 pci_disable_device(pdev);
4074 pci_set_power_state(pdev, pci_choose_state(pdev, state));
4080 static int qlge_resume(struct pci_dev *pdev)
4082 struct net_device *ndev = pci_get_drvdata(pdev);
4083 struct ql_adapter *qdev = netdev_priv(ndev);
4086 pci_set_power_state(pdev, PCI_D0);
4087 pci_restore_state(pdev);
4088 err = pci_enable_device(pdev);
4090 QPRINTK(qdev, IFUP, ERR, "Cannot enable PCI device from suspend\n");
4093 pci_set_master(pdev);
4095 pci_enable_wake(pdev, PCI_D3hot, 0);
4096 pci_enable_wake(pdev, PCI_D3cold, 0);
4098 if (netif_running(ndev)) {
4099 err = ql_adapter_up(qdev);
4104 netif_device_attach(ndev);
4108 #endif /* CONFIG_PM */
4110 static void qlge_shutdown(struct pci_dev *pdev)
4112 qlge_suspend(pdev, PMSG_SUSPEND);
4115 static struct pci_driver qlge_driver = {
4117 .id_table = qlge_pci_tbl,
4118 .probe = qlge_probe,
4119 .remove = __devexit_p(qlge_remove),
4121 .suspend = qlge_suspend,
4122 .resume = qlge_resume,
4124 .shutdown = qlge_shutdown,
4125 .err_handler = &qlge_err_handler
4128 static int __init qlge_init_module(void)
4130 return pci_register_driver(&qlge_driver);
4133 static void __exit qlge_exit(void)
4135 pci_unregister_driver(&qlge_driver);
4138 module_init(qlge_init_module);
4139 module_exit(qlge_exit);