1 /*======================================================================
3 A driver for PCMCIA serial devices
5 serial_cs.c 1.134 2002/05/04 05:48:53
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in which
23 case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
32 ======================================================================*/
34 #include <linux/module.h>
35 #include <linux/moduleparam.h>
36 #include <linux/kernel.h>
37 #include <linux/init.h>
38 #include <linux/ptrace.h>
39 #include <linux/slab.h>
40 #include <linux/string.h>
41 #include <linux/timer.h>
42 #include <linux/serial_core.h>
43 #include <linux/delay.h>
44 #include <linux/major.h>
46 #include <asm/system.h>
48 #include <pcmcia/cs_types.h>
49 #include <pcmcia/cs.h>
50 #include <pcmcia/cistpl.h>
51 #include <pcmcia/ciscode.h>
52 #include <pcmcia/ds.h>
53 #include <pcmcia/cisreg.h>
58 static int pc_debug = PCMCIA_DEBUG;
59 module_param(pc_debug, int, 0644);
60 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
61 static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
63 #define DEBUG(n, args...)
66 /*====================================================================*/
68 /* Parameters that can be set with 'insmod' */
70 /* Enable the speaker? */
71 static int do_sound = 1;
72 /* Skip strict UART tests? */
73 static int buggy_uart;
75 module_param(do_sound, int, 0444);
76 module_param(buggy_uart, int, 0444);
78 /*====================================================================*/
80 /* Table of multi-port card ID's */
85 int multi; /* 1 = multifunction, > 1 = # ports */
86 void (*config)(struct pcmcia_device *);
87 void (*setup)(struct pcmcia_device *, struct uart_port *);
88 void (*wakeup)(struct pcmcia_device *);
89 int (*post)(struct pcmcia_device *);
93 struct pcmcia_device *p_dev;
102 const struct serial_quirk *quirk;
105 struct serial_cfg_mem {
112 * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
113 * manfid 0x0160, 0x0104
114 * This card appears to have a 14.7456MHz clock.
116 static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
118 port->uartclk = 14745600;
121 static int quirk_post_ibm(struct pcmcia_device *link)
123 conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
124 int last_ret, last_fn;
126 last_ret = pcmcia_access_configuration_register(link, ®);
128 last_fn = AccessConfigurationRegister;
131 reg.Action = CS_WRITE;
132 reg.Value = reg.Value | 1;
133 last_ret = pcmcia_access_configuration_register(link, ®);
135 last_fn = AccessConfigurationRegister;
141 cs_error(link, last_fn, last_ret);
146 * Nokia cards are not really multiport cards. Shouldn't this
147 * be handled by setting the quirk entry .multi = 0 | 1 ?
149 static void quirk_config_nokia(struct pcmcia_device *link)
151 struct serial_info *info = link->priv;
157 static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
159 struct serial_info *info = link->priv;
161 outb(12, info->c950ctrl + 1);
164 /* request_region? oxsemi branch does no request_region too... */
166 * This sequence is needed to properly initialize MC45 attached to OXCF950.
167 * I tried decreasing these msleep()s, but it worked properly (survived
168 * 1000 stop/start operations) with these timeouts (or bigger).
170 static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
172 struct serial_info *info = link->priv;
173 unsigned int ctrl = info->c950ctrl;
191 * Socket Dual IO: this enables irq's for second port
193 static void quirk_config_socket(struct pcmcia_device *link)
195 struct serial_info *info = link->priv;
198 link->conf.Present |= PRESENT_EXT_STATUS;
199 link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
203 static const struct serial_quirk quirks[] = {
208 .setup = quirk_setup_brainboxes_0104,
210 .manfid = MANFID_IBM,
213 .post = quirk_post_ibm,
215 .manfid = MANFID_INTEL,
216 .prodid = PRODID_INTEL_DUAL_RS232,
219 .manfid = MANFID_NATINST,
220 .prodid = PRODID_NATINST_QUAD_RS232,
223 .manfid = MANFID_NOKIA,
226 .config = quirk_config_nokia,
228 .manfid = MANFID_OMEGA,
229 .prodid = PRODID_OMEGA_QSP_100,
232 .manfid = MANFID_OXSEMI,
235 .wakeup = quirk_wakeup_oxsemi,
237 .manfid = MANFID_POSSIO,
238 .prodid = PRODID_POSSIO_GCC,
240 .wakeup = quirk_wakeup_possio_gcc,
242 .manfid = MANFID_QUATECH,
243 .prodid = PRODID_QUATECH_DUAL_RS232,
246 .manfid = MANFID_QUATECH,
247 .prodid = PRODID_QUATECH_DUAL_RS232_D1,
250 .manfid = MANFID_QUATECH,
251 .prodid = PRODID_QUATECH_DUAL_RS232_G,
254 .manfid = MANFID_QUATECH,
255 .prodid = PRODID_QUATECH_QUAD_RS232,
258 .manfid = MANFID_SOCKET,
259 .prodid = PRODID_SOCKET_DUAL_RS232,
261 .config = quirk_config_socket,
263 .manfid = MANFID_SOCKET,
266 .config = quirk_config_socket,
271 static int serial_config(struct pcmcia_device * link);
274 /*======================================================================
276 After a card is removed, serial_remove() will unregister
277 the serial device(s), and release the PCMCIA configuration.
279 ======================================================================*/
281 static void serial_remove(struct pcmcia_device *link)
283 struct serial_info *info = link->priv;
286 DEBUG(0, "serial_release(0x%p)\n", link);
289 * Recheck to see if the device is still configured.
291 for (i = 0; i < info->ndev; i++)
292 serial8250_unregister_port(info->line[i]);
294 info->p_dev->dev_node = NULL;
297 pcmcia_disable_device(link);
300 static int serial_suspend(struct pcmcia_device *link)
302 struct serial_info *info = link->priv;
305 for (i = 0; i < info->ndev; i++)
306 serial8250_suspend_port(info->line[i]);
311 static int serial_resume(struct pcmcia_device *link)
313 struct serial_info *info = link->priv;
316 for (i = 0; i < info->ndev; i++)
317 serial8250_resume_port(info->line[i]);
319 if (info->quirk && info->quirk->wakeup)
320 info->quirk->wakeup(link);
325 /*======================================================================
327 serial_attach() creates an "instance" of the driver, allocating
328 local data structures for one device. The device is registered
331 ======================================================================*/
333 static int serial_probe(struct pcmcia_device *link)
335 struct serial_info *info;
337 DEBUG(0, "serial_attach()\n");
339 /* Create new serial device */
340 info = kzalloc(sizeof (*info), GFP_KERNEL);
346 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
347 link->io.NumPorts1 = 8;
348 link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
349 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
350 link->conf.Attributes = CONF_ENABLE_IRQ;
352 link->conf.Attributes |= CONF_ENABLE_SPKR;
353 link->conf.Status = CCSR_AUDIO_ENA;
355 link->conf.IntType = INT_MEMORY_AND_IO;
357 return serial_config(link);
360 /*======================================================================
362 This deletes a driver "instance". The device is de-registered
363 with Card Services. If it has been released, all local data
364 structures are freed. Otherwise, the structures will be freed
365 when the device is released.
367 ======================================================================*/
369 static void serial_detach(struct pcmcia_device *link)
371 struct serial_info *info = link->priv;
373 DEBUG(0, "serial_detach(0x%p)\n", link);
376 * Ensure any outstanding scheduled tasks are completed.
378 flush_scheduled_work();
381 * Ensure that the ports have been released.
389 /*====================================================================*/
391 static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
392 unsigned int iobase, int irq)
394 struct uart_port port;
397 memset(&port, 0, sizeof (struct uart_port));
398 port.iobase = iobase;
400 port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
401 port.uartclk = 1843200;
402 port.dev = &handle_to_dev(handle);
404 port.flags |= UPF_BUGGY_UART;
406 if (info->quirk && info->quirk->setup)
407 info->quirk->setup(handle, &port);
409 line = serial8250_register_port(&port);
411 printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
412 "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
416 info->line[info->ndev] = line;
417 sprintf(info->node[info->ndev].dev_name, "ttyS%d", line);
418 info->node[info->ndev].major = TTY_MAJOR;
419 info->node[info->ndev].minor = 0x40 + line;
421 info->node[info->ndev - 1].next = &info->node[info->ndev];
427 /*====================================================================*/
430 first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
433 i = pcmcia_get_first_tuple(handle, tuple);
435 return CS_NO_MORE_ITEMS;
436 i = pcmcia_get_tuple_data(handle, tuple);
439 return pcmcia_parse_tuple(handle, tuple, parse);
442 /*====================================================================*/
444 static int simple_config_check(struct pcmcia_device *p_dev,
445 cistpl_cftable_entry_t *cf,
448 static const int size_table[2] = { 8, 16 };
449 int *try = priv_data;
451 if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
453 cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
455 if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
456 && (cf->io.win[0].base != 0)) {
457 p_dev->conf.ConfigIndex = cf->index;
458 p_dev->io.BasePort1 = cf->io.win[0].base;
459 p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
460 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
461 if (!pcmcia_request_io(p_dev, &p_dev->io))
467 static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
468 cistpl_cftable_entry_t *cf,
471 static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
474 if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
475 p_dev->conf.ConfigIndex = cf->index;
476 for (j = 0; j < 5; j++) {
477 p_dev->io.BasePort1 = base[j];
478 p_dev->io.IOAddrLines = base[j] ? 16 : 3;
479 if (!pcmcia_request_io(p_dev, &p_dev->io))
486 static int simple_config(struct pcmcia_device *link)
488 struct serial_info *info = link->priv;
489 config_info_t config;
492 /* If the card is already configured, look up the port and irq */
493 i = pcmcia_get_configuration_info(link, &config);
494 if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
495 unsigned int port = 0;
496 if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
497 port = config.BasePort2;
499 } else if ((info->manfid == MANFID_OSITECH) &&
500 (config.NumPorts1 == 0x40)) {
501 port = config.BasePort1 + 0x28;
505 return setup_serial(link, info, port, config.AssignedIRQ);
509 /* First pass: look for a config entry that looks normal.
510 * Two tries: without IO aliases, then with aliases */
511 for (try = 0; try < 4; try++)
512 if (!pcmcia_loop_config(link, simple_config_check, &try))
515 /* Second pass: try to find an entry that isn't picky about
516 its base address, then try to grab any standard serial port
517 address, and finally try to get any free port. */
518 if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
522 "serial_cs: no usable port range found, giving up\n");
523 cs_error(link, RequestIO, i);
527 i = pcmcia_request_irq(link, &link->irq);
528 if (i != CS_SUCCESS) {
529 cs_error(link, RequestIRQ, i);
530 link->irq.AssignedIRQ = 0;
532 if (info->multi && (info->manfid == MANFID_3COM))
533 link->conf.ConfigIndex &= ~(0x08);
536 * Apply any configuration quirks.
538 if (info->quirk && info->quirk->config)
539 info->quirk->config(link);
541 i = pcmcia_request_configuration(link, &link->conf);
542 if (i != CS_SUCCESS) {
543 cs_error(link, RequestConfiguration, i);
546 return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
549 static int multi_config_check(struct pcmcia_device *p_dev,
550 cistpl_cftable_entry_t *cf,
553 int *base2 = priv_data;
555 /* The quad port cards have bad CIS's, so just look for a
556 window larger than 8 ports and assume it will be right */
557 if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
558 p_dev->conf.ConfigIndex = cf->index;
559 p_dev->io.BasePort1 = cf->io.win[0].base;
560 p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
561 if (!pcmcia_request_io(p_dev, &p_dev->io)) {
562 *base2 = p_dev->io.BasePort1 + 8;
569 static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
570 cistpl_cftable_entry_t *cf,
573 int *base2 = priv_data;
575 if (cf->io.nwin == 2) {
576 p_dev->conf.ConfigIndex = cf->index;
577 p_dev->io.BasePort1 = cf->io.win[0].base;
578 p_dev->io.BasePort2 = cf->io.win[1].base;
579 p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
580 if (!pcmcia_request_io(p_dev, &p_dev->io)) {
581 *base2 = p_dev->io.BasePort2;
588 static int multi_config(struct pcmcia_device *link)
590 struct serial_info *info = link->priv;
593 /* First, look for a generic full-sized window */
594 link->io.NumPorts1 = info->multi * 8;
595 if (pcmcia_loop_config(link, multi_config_check, &base2)) {
596 /* If that didn't work, look for two windows */
597 link->io.NumPorts1 = link->io.NumPorts2 = 8;
599 if (pcmcia_loop_config(link, multi_config_check_notpicky,
601 printk(KERN_NOTICE "serial_cs: no usable port range"
602 "found, giving up\n");
607 i = pcmcia_request_irq(link, &link->irq);
608 if (i != CS_SUCCESS) {
609 /* FIXME: comment does not fit, error handling does not fit */
611 "serial_cs: no usable port range found, giving up\n");
612 cs_error(link, RequestIRQ, i);
613 link->irq.AssignedIRQ = 0;
617 * Apply any configuration quirks.
619 if (info->quirk && info->quirk->config)
620 info->quirk->config(link);
622 i = pcmcia_request_configuration(link, &link->conf);
623 if (i != CS_SUCCESS) {
624 cs_error(link, RequestConfiguration, i);
628 /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
629 * 8 registers are for the UART, the others are extra registers.
630 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
632 if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
633 info->prodid == PRODID_POSSIO_GCC)) {
636 if (link->conf.ConfigIndex == 1 ||
637 link->conf.ConfigIndex == 3) {
638 err = setup_serial(link, info, base2,
639 link->irq.AssignedIRQ);
640 base2 = link->io.BasePort1;
642 err = setup_serial(link, info, link->io.BasePort1,
643 link->irq.AssignedIRQ);
645 info->c950ctrl = base2;
648 * FIXME: We really should wake up the port prior to
649 * handing it over to the serial layer.
651 if (info->quirk && info->quirk->wakeup)
652 info->quirk->wakeup(link);
657 setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
658 for (i = 0; i < info->multi - 1; i++)
659 setup_serial(link, info, base2 + (8 * i),
660 link->irq.AssignedIRQ);
664 /*======================================================================
666 serial_config() is scheduled to run after a CARD_INSERTION event
667 is received, to configure the PCMCIA socket, and to make the
668 serial device available to the system.
670 ======================================================================*/
672 static int serial_config(struct pcmcia_device * link)
674 struct serial_info *info = link->priv;
675 struct serial_cfg_mem *cfg_mem;
679 cistpl_cftable_entry_t *cf;
682 DEBUG(0, "serial_config(0x%p)\n", link);
684 cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
688 tuple = &cfg_mem->tuple;
689 parse = &cfg_mem->parse;
690 cf = &parse->cftable_entry;
693 tuple->TupleData = (cisdata_t *) buf;
694 tuple->TupleOffset = 0;
695 tuple->TupleDataMax = 255;
696 tuple->Attributes = 0;
698 /* Is this a compliant multifunction card? */
699 tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
700 tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
701 info->multi = (first_tuple(link, tuple, parse) == CS_SUCCESS);
703 /* Is this a multiport card? */
704 tuple->DesiredTuple = CISTPL_MANFID;
705 info->manfid = link->manf_id;
706 info->prodid = link->card_id;
708 for (i = 0; i < ARRAY_SIZE(quirks); i++)
709 if ((quirks[i].manfid == ~0 ||
710 quirks[i].manfid == info->manfid) &&
711 (quirks[i].prodid == ~0 ||
712 quirks[i].prodid == info->prodid)) {
713 info->quirk = &quirks[i];
717 /* Another check for dual-serial cards: look for either serial or
718 multifunction cards that ask for appropriate IO port ranges */
719 tuple->DesiredTuple = CISTPL_FUNCID;
720 if ((info->multi == 0) &&
721 (link->has_func_id) &&
722 ((link->func_id == CISTPL_FUNCID_MULTI) ||
723 (link->func_id == CISTPL_FUNCID_SERIAL))) {
724 tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
725 if (first_tuple(link, tuple, parse) == CS_SUCCESS) {
726 if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
727 info->multi = cf->io.win[0].len >> 3;
728 if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
729 (cf->io.win[1].len == 8))
735 * Apply any multi-port quirk.
737 if (info->quirk && info->quirk->multi != -1)
738 info->multi = info->quirk->multi;
749 * Apply any post-init quirk. FIXME: This should really happen
750 * before we register the port, since it might already be in use.
752 if (info->quirk && info->quirk->post)
753 if (info->quirk->post(link))
756 link->dev_node = &info->node[0];
766 static struct pcmcia_device_id serial_ids[] = {
767 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
768 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
769 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
770 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
771 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
772 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
773 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
774 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
775 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
776 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
777 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
778 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
779 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
780 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
781 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
782 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
783 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
784 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
785 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
786 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
787 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
788 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
789 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
790 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
791 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
792 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
793 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
794 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
795 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
796 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
797 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
798 PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
799 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
800 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
801 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
802 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
803 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
804 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
805 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
806 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
807 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
808 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
809 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
810 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
811 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
812 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
813 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
814 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
815 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
816 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
817 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
818 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
819 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
820 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
821 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
822 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
823 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
824 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
825 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
826 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
827 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
828 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
829 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
830 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
831 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
832 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
833 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
834 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
835 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
836 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
837 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
838 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
839 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
840 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
841 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
842 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
843 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
844 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
845 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
846 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
847 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
848 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
849 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
850 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
851 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
852 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
853 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
854 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
855 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"),
856 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"),
857 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"),
858 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"),
859 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"),
860 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
861 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
862 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "3CCFEM556.cis"),
863 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"),
864 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"),
865 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"),
866 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
867 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
868 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
869 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
870 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"),
871 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
872 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),
873 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "RS-COM-2P.cis"),
874 PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"),
875 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
876 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
877 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
878 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
879 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
880 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
881 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
882 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
883 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
884 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
885 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
886 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
887 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
888 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
889 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
890 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
891 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
892 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
893 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
894 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
895 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
896 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
897 PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
898 PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
899 PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
901 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
902 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
903 PCMCIA_DEVICE_FUNC_ID(2),
906 MODULE_DEVICE_TABLE(pcmcia, serial_ids);
908 static struct pcmcia_driver serial_cs_driver = {
909 .owner = THIS_MODULE,
913 .probe = serial_probe,
914 .remove = serial_detach,
915 .id_table = serial_ids,
916 .suspend = serial_suspend,
917 .resume = serial_resume,
920 static int __init init_serial_cs(void)
922 return pcmcia_register_driver(&serial_cs_driver);
925 static void __exit exit_serial_cs(void)
927 pcmcia_unregister_driver(&serial_cs_driver);
930 module_init(init_serial_cs);
931 module_exit(exit_serial_cs);
933 MODULE_LICENSE("GPL");