git.oblomov.eu Git - linux-2.6/blob - drivers/serial/8250_pci.c

   1 /*
   2  *  linux/drivers/char/8250_pci.c
   3  *
   4  *  Probe module for 8250/16550-type PCI serial ports.
   5  *
   6  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
   7  *
   8  *  Copyright (C) 2001 Russell King, All Rights Reserved.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License.
  13  *
  14  *  $Id: 8250_pci.c,v 1.28 2002/11/02 11:14:18 rmk Exp $
  15  */
  16 #include <linux/module.h>
  17 #include <linux/init.h>
  18 #include <linux/pci.h>
  19 #include <linux/string.h>
  20 #include <linux/kernel.h>
  21 #include <linux/slab.h>
  22 #include <linux/delay.h>
  23 #include <linux/tty.h>
  24 #include <linux/serial_core.h>
  25 #include <linux/8250_pci.h>
  26 #include <linux/bitops.h>
  27
  28 #include <asm/byteorder.h>
  29 #include <asm/io.h>
  30
  31 #include "8250.h"
  32
  33 #undef SERIAL_DEBUG_PCI
  34
  35 /*
  36  * init function returns:
  37  *  > 0 - number of ports
  38  *  = 0 - use board->num_ports
  39  *  < 0 - error
  40  */
  41 struct pci_serial_quirk {
  42         u32     vendor;
  43         u32     device;
  44         u32     subvendor;
  45         u32     subdevice;
  46         int     (*init)(struct pci_dev *dev);
  47         int     (*setup)(struct serial_private *, struct pciserial_board *,
  48                          struct uart_port *, int);
  49         void    (*exit)(struct pci_dev *dev);
  50 };
  51
  52 #define PCI_NUM_BAR_RESOURCES   6
  53
  54 struct serial_private {
  55         struct pci_dev          *dev;
  56         unsigned int            nr;
  57         void __iomem            *remapped_bar[PCI_NUM_BAR_RESOURCES];
  58         struct pci_serial_quirk *quirk;
  59         int                     line[0];
  60 };
  61
  62 static void moan_device(const char *str, struct pci_dev *dev)
  63 {
  64         printk(KERN_WARNING "%s: %s\n"
  65                KERN_WARNING "Please send the output of lspci -vv, this\n"
  66                KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
  67                KERN_WARNING "manufacturer and name of serial board or\n"
  68                KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n",
  69                pci_name(dev), str, dev->vendor, dev->device,
  70                dev->subsystem_vendor, dev->subsystem_device);
  71 }
  72
  73 static int
  74 setup_port(struct serial_private *priv, struct uart_port *port,
  75            int bar, int offset, int regshift)
  76 {
  77         struct pci_dev *dev = priv->dev;
  78         unsigned long base, len;
  79
  80         if (bar >= PCI_NUM_BAR_RESOURCES)
  81                 return -EINVAL;
  82
  83         base = pci_resource_start(dev, bar);
  84
  85         if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
  86                 len =  pci_resource_len(dev, bar);
  87
  88                 if (!priv->remapped_bar[bar])
  89                         priv->remapped_bar[bar] = ioremap(base, len);
  90                 if (!priv->remapped_bar[bar])
  91                         return -ENOMEM;
  92
  93                 port->iotype = UPIO_MEM;
  94                 port->iobase = 0;
  95                 port->mapbase = base + offset;
  96                 port->membase = priv->remapped_bar[bar] + offset;
  97                 port->regshift = regshift;
  98         } else {
  99                 port->iotype = UPIO_PORT;
 100                 port->iobase = base + offset;
 101                 port->mapbase = 0;
 102                 port->membase = NULL;
 103                 port->regshift = 0;
 104         }
 105         return 0;
 106 }
 107
 108 /*
 109  * ADDI-DATA GmbH communication cards <info@addi-data.com>
 110  */
 111 static int addidata_apci7800_setup(struct serial_private *priv,
 112                                 struct pciserial_board *board,
 113                                 struct uart_port *port, int idx)
 114 {
 115         unsigned int bar = 0, offset = board->first_offset;
 116         bar = FL_GET_BASE(board->flags);
 117
 118         if (idx < 2) {
 119                 offset += idx * board->uart_offset;
 120         } else if ((idx >= 2) && (idx < 4)) {
 121                 bar += 1;
 122                 offset += ((idx - 2) * board->uart_offset);
 123         } else if ((idx >= 4) && (idx < 6)) {
 124                 bar += 2;
 125                 offset += ((idx - 4) * board->uart_offset);
 126         } else if (idx >= 6) {
 127                 bar += 3;
 128                 offset += ((idx - 6) * board->uart_offset);
 129         }
 130
 131         return setup_port(priv, port, bar, offset, board->reg_shift);
 132 }
 133
 134 /*
 135  * AFAVLAB uses a different mixture of BARs and offsets
 136  * Not that ugly ;) -- HW
 137  */
 138 static int
 139 afavlab_setup(struct serial_private *priv, struct pciserial_board *board,
 140               struct uart_port *port, int idx)
 141 {
 142         unsigned int bar, offset = board->first_offset;
 143
 144         bar = FL_GET_BASE(board->flags);
 145         if (idx < 4)
 146                 bar += idx;
 147         else {
 148                 bar = 4;
 149                 offset += (idx - 4) * board->uart_offset;
 150         }
 151
 152         return setup_port(priv, port, bar, offset, board->reg_shift);
 153 }
 154
 155 /*
 156  * HP's Remote Management Console.  The Diva chip came in several
 157  * different versions.  N-class, L2000 and A500 have two Diva chips, each
 158  * with 3 UARTs (the third UART on the second chip is unused).  Superdome
 159  * and Keystone have one Diva chip with 3 UARTs.  Some later machines have
 160  * one Diva chip, but it has been expanded to 5 UARTs.
 161  */
 162 static int pci_hp_diva_init(struct pci_dev *dev)
 163 {
 164         int rc = 0;
 165
 166         switch (dev->subsystem_device) {
 167         case PCI_DEVICE_ID_HP_DIVA_TOSCA1:
 168         case PCI_DEVICE_ID_HP_DIVA_HALFDOME:
 169         case PCI_DEVICE_ID_HP_DIVA_KEYSTONE:
 170         case PCI_DEVICE_ID_HP_DIVA_EVEREST:
 171                 rc = 3;
 172                 break;
 173         case PCI_DEVICE_ID_HP_DIVA_TOSCA2:
 174                 rc = 2;
 175                 break;
 176         case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
 177                 rc = 4;
 178                 break;
 179         case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
 180         case PCI_DEVICE_ID_HP_DIVA_HURRICANE:
 181                 rc = 1;
 182                 break;
 183         }
 184
 185         return rc;
 186 }
 187
 188 /*
 189  * HP's Diva chip puts the 4th/5th serial port further out, and
 190  * some serial ports are supposed to be hidden on certain models.
 191  */
 192 static int
 193 pci_hp_diva_setup(struct serial_private *priv, struct pciserial_board *board,
 194               struct uart_port *port, int idx)
 195 {
 196         unsigned int offset = board->first_offset;
 197         unsigned int bar = FL_GET_BASE(board->flags);
 198
 199         switch (priv->dev->subsystem_device) {
 200         case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
 201                 if (idx == 3)
 202                         idx++;
 203                 break;
 204         case PCI_DEVICE_ID_HP_DIVA_EVEREST:
 205                 if (idx > 0)
 206                         idx++;
 207                 if (idx > 2)
 208                         idx++;
 209                 break;
 210         }
 211         if (idx > 2)
 212                 offset = 0x18;
 213
 214         offset += idx * board->uart_offset;
 215
 216         return setup_port(priv, port, bar, offset, board->reg_shift);
 217 }
 218
 219 /*
 220  * Added for EKF Intel i960 serial boards
 221  */
 222 static int pci_inteli960ni_init(struct pci_dev *dev)
 223 {
 224         unsigned long oldval;
 225
 226         if (!(dev->subsystem_device & 0x1000))
 227                 return -ENODEV;
 228
 229         /* is firmware started? */
 230         pci_read_config_dword(dev, 0x44, (void *)&oldval);
 231         if (oldval == 0x00001000L) { /* RESET value */
 232                 printk(KERN_DEBUG "Local i960 firmware missing");
 233                 return -ENODEV;
 234         }
 235         return 0;
 236 }
 237
 238 /*
 239  * Some PCI serial cards using the PLX 9050 PCI interface chip require
 240  * that the card interrupt be explicitly enabled or disabled.  This
 241  * seems to be mainly needed on card using the PLX which also use I/O
 242  * mapped memory.
 243  */
 244 static int pci_plx9050_init(struct pci_dev *dev)
 245 {
 246         u8 irq_config;
 247         void __iomem *p;
 248
 249         if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) {
 250                 moan_device("no memory in bar 0", dev);
 251                 return 0;
 252         }
 253
 254         irq_config = 0x41;
 255         if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
 256             dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS)
 257                 irq_config = 0x43;
 258
 259         if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
 260             (dev->device == PCI_DEVICE_ID_PLX_ROMULUS))
 261                 /*
 262                  * As the megawolf cards have the int pins active
 263                  * high, and have 2 UART chips, both ints must be
 264                  * enabled on the 9050. Also, the UARTS are set in
 265                  * 16450 mode by default, so we have to enable the
 266                  * 16C950 'enhanced' mode so that we can use the
 267                  * deep FIFOs
 268                  */
 269                 irq_config = 0x5b;
 270         /*
 271          * enable/disable interrupts
 272          */
 273         p = ioremap(pci_resource_start(dev, 0), 0x80);
 274         if (p == NULL)
 275                 return -ENOMEM;
 276         writel(irq_config, p + 0x4c);
 277
 278         /*
 279          * Read the register back to ensure that it took effect.
 280          */
 281         readl(p + 0x4c);
 282         iounmap(p);
 283
 284         return 0;
 285 }
 286
 287 static void __devexit pci_plx9050_exit(struct pci_dev *dev)
 288 {
 289         u8 __iomem *p;
 290
 291         if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0)
 292                 return;
 293
 294         /*
 295          * disable interrupts
 296          */
 297         p = ioremap(pci_resource_start(dev, 0), 0x80);
 298         if (p != NULL) {
 299                 writel(0, p + 0x4c);
 300
 301                 /*
 302                  * Read the register back to ensure that it took effect.
 303                  */
 304                 readl(p + 0x4c);
 305                 iounmap(p);
 306         }
 307 }
 308
 309 /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
 310 static int
 311 sbs_setup(struct serial_private *priv, struct pciserial_board *board,
 312                 struct uart_port *port, int idx)
 313 {
 314         unsigned int bar, offset = board->first_offset;
 315
 316         bar = 0;
 317
 318         if (idx < 4) {
 319                 /* first four channels map to 0, 0x100, 0x200, 0x300 */
 320                 offset += idx * board->uart_offset;
 321         } else if (idx < 8) {
 322                 /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */
 323                 offset += idx * board->uart_offset + 0xC00;
 324         } else /* we have only 8 ports on PMC-OCTALPRO */
 325                 return 1;
 326
 327         return setup_port(priv, port, bar, offset, board->reg_shift);
 328 }
 329
 330 /*
 331 * This does initialization for PMC OCTALPRO cards:
 332 * maps the device memory, resets the UARTs (needed, bc
 333 * if the module is removed and inserted again, the card
 334 * is in the sleep mode) and enables global interrupt.
 335 */
 336
 337 /* global control register offset for SBS PMC-OctalPro */
 338 #define OCT_REG_CR_OFF          0x500
 339
 340 static int sbs_init(struct pci_dev *dev)
 341 {
 342         u8 __iomem *p;
 343
 344         p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0));
 345
 346         if (p == NULL)
 347                 return -ENOMEM;
 348         /* Set bit-4 Control Register (UART RESET) in to reset the uarts */
 349         writeb(0x10, p + OCT_REG_CR_OFF);
 350         udelay(50);
 351         writeb(0x0, p + OCT_REG_CR_OFF);
 352
 353         /* Set bit-2 (INTENABLE) of Control Register */
 354         writeb(0x4, p + OCT_REG_CR_OFF);
 355         iounmap(p);
 356
 357         return 0;
 358 }
 359
 360 /*
 361  * Disables the global interrupt of PMC-OctalPro
 362  */
 363
 364 static void __devexit sbs_exit(struct pci_dev *dev)
 365 {
 366         u8 __iomem *p;
 367
 368         p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0));
 369         /* FIXME: What if resource_len < OCT_REG_CR_OFF */
 370         if (p != NULL)
 371                 writeb(0, p + OCT_REG_CR_OFF);
 372         iounmap(p);
 373 }
 374
 375 /*
 376  * SIIG serial cards have an PCI interface chip which also controls
 377  * the UART clocking frequency. Each UART can be clocked independently
 378  * (except cards equiped with 4 UARTs) and initial clocking settings
 379  * are stored in the EEPROM chip. It can cause problems because this
 380  * version of serial driver doesn't support differently clocked UART's
 381  * on single PCI card. To prevent this, initialization functions set
 382  * high frequency clocking for all UART's on given card. It is safe (I
 383  * hope) because it doesn't touch EEPROM settings to prevent conflicts
 384  * with other OSes (like M$ DOS).
 385  *
 386  *  SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
 387  *
 388  * There is two family of SIIG serial cards with different PCI
 389  * interface chip and different configuration methods:
 390  *     - 10x cards have control registers in IO and/or memory space;
 391  *     - 20x cards have control registers in standard PCI configuration space.
 392  *
 393  * Note: all 10x cards have PCI device ids 0x10..
 394  *       all 20x cards have PCI device ids 0x20..
 395  *
 396  * There are also Quartet Serial cards which use Oxford Semiconductor
 397  * 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
 398  *
 399  * Note: some SIIG cards are probed by the parport_serial object.
 400  */
 401
 402 #define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
 403 #define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
 404
 405 static int pci_siig10x_init(struct pci_dev *dev)
 406 {
 407         u16 data;
 408         void __iomem *p;
 409
 410         switch (dev->device & 0xfff8) {
 411         case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
 412                 data = 0xffdf;
 413                 break;
 414         case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
 415                 data = 0xf7ff;
 416                 break;
 417         default:                        /* 1S1P, 4S */
 418                 data = 0xfffb;
 419                 break;
 420         }
 421
 422         p = ioremap(pci_resource_start(dev, 0), 0x80);
 423         if (p == NULL)
 424                 return -ENOMEM;
 425
 426         writew(readw(p + 0x28) & data, p + 0x28);
 427         readw(p + 0x28);
 428         iounmap(p);
 429         return 0;
 430 }
 431
 432 #define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
 433 #define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
 434
 435 static int pci_siig20x_init(struct pci_dev *dev)
 436 {
 437         u8 data;
 438
 439         /* Change clock frequency for the first UART. */
 440         pci_read_config_byte(dev, 0x6f, &data);
 441         pci_write_config_byte(dev, 0x6f, data & 0xef);
 442
 443         /* If this card has 2 UART, we have to do the same with second UART. */
 444         if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
 445             ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
 446                 pci_read_config_byte(dev, 0x73, &data);
 447                 pci_write_config_byte(dev, 0x73, data & 0xef);
 448         }
 449         return 0;
 450 }
 451
 452 static int pci_siig_init(struct pci_dev *dev)
 453 {
 454         unsigned int type = dev->device & 0xff00;
 455
 456         if (type == 0x1000)
 457                 return pci_siig10x_init(dev);
 458         else if (type == 0x2000)
 459                 return pci_siig20x_init(dev);
 460
 461         moan_device("Unknown SIIG card", dev);
 462         return -ENODEV;
 463 }
 464
 465 static int pci_siig_setup(struct serial_private *priv,
 466                           struct pciserial_board *board,
 467                           struct uart_port *port, int idx)
 468 {
 469         unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
 470
 471         if (idx > 3) {
 472                 bar = 4;
 473                 offset = (idx - 4) * 8;
 474         }
 475
 476         return setup_port(priv, port, bar, offset, 0);
 477 }
 478
 479 /*
 480  * Timedia has an explosion of boards, and to avoid the PCI table from
 481  * growing *huge*, we use this function to collapse some 70 entries
 482  * in the PCI table into one, for sanity's and compactness's sake.
 483  */
 484 static const unsigned short timedia_single_port[] = {
 485         0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
 486 };
 487
 488 static const unsigned short timedia_dual_port[] = {
 489         0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
 490         0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
 491         0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
 492         0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
 493         0xD079, 0
 494 };
 495
 496 static const unsigned short timedia_quad_port[] = {
 497         0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
 498         0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
 499         0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
 500         0xB157, 0
 501 };
 502
 503 static const unsigned short timedia_eight_port[] = {
 504         0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
 505         0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
 506 };
 507
 508 static const struct timedia_struct {
 509         int num;
 510         const unsigned short *ids;
 511 } timedia_data[] = {
 512         { 1, timedia_single_port },
 513         { 2, timedia_dual_port },
 514         { 4, timedia_quad_port },
 515         { 8, timedia_eight_port }
 516 };
 517
 518 static int pci_timedia_init(struct pci_dev *dev)
 519 {
 520         const unsigned short *ids;
 521         int i, j;
 522
 523         for (i = 0; i < ARRAY_SIZE(timedia_data); i++) {
 524                 ids = timedia_data[i].ids;
 525                 for (j = 0; ids[j]; j++)
 526                         if (dev->subsystem_device == ids[j])
 527                                 return timedia_data[i].num;
 528         }
 529         return 0;
 530 }
 531
 532 /*
 533  * Timedia/SUNIX uses a mixture of BARs and offsets
 534  * Ugh, this is ugly as all hell --- TYT
 535  */
 536 static int
 537 pci_timedia_setup(struct serial_private *priv, struct pciserial_board *board,
 538                   struct uart_port *port, int idx)
 539 {
 540         unsigned int bar = 0, offset = board->first_offset;
 541
 542         switch (idx) {
 543         case 0:
 544                 bar = 0;
 545                 break;
 546         case 1:
 547                 offset = board->uart_offset;
 548                 bar = 0;
 549                 break;
 550         case 2:
 551                 bar = 1;
 552                 break;
 553         case 3:
 554                 offset = board->uart_offset;
 555                 /* FALLTHROUGH */
 556         case 4: /* BAR 2 */
 557         case 5: /* BAR 3 */
 558         case 6: /* BAR 4 */
 559         case 7: /* BAR 5 */
 560                 bar = idx - 2;
 561         }
 562
 563         return setup_port(priv, port, bar, offset, board->reg_shift);
 564 }
 565
 566 /*
 567  * Some Titan cards are also a little weird
 568  */
 569 static int
 570 titan_400l_800l_setup(struct serial_private *priv,
 571                       struct pciserial_board *board,
 572                       struct uart_port *port, int idx)
 573 {
 574         unsigned int bar, offset = board->first_offset;
 575
 576         switch (idx) {
 577         case 0:
 578                 bar = 1;
 579                 break;
 580         case 1:
 581                 bar = 2;
 582                 break;
 583         default:
 584                 bar = 4;
 585                 offset = (idx - 2) * board->uart_offset;
 586         }
 587
 588         return setup_port(priv, port, bar, offset, board->reg_shift);
 589 }
 590
 591 static int pci_xircom_init(struct pci_dev *dev)
 592 {
 593         msleep(100);
 594         return 0;
 595 }
 596
 597 static int pci_netmos_init(struct pci_dev *dev)
 598 {
 599         /* subdevice 0x00PS means <P> parallel, <S> serial */
 600         unsigned int num_serial = dev->subsystem_device & 0xf;
 601
 602         if (num_serial == 0)
 603                 return -ENODEV;
 604         return num_serial;
 605 }
 606
 607 /*
 608  * ITE support by Niels de Vos <niels.devos@wincor-nixdorf.com>
 609  *
 610  * These chips are available with optionally one parallel port and up to
 611  * two serial ports. Unfortunately they all have the same product id.
 612  *
 613  * Basic configuration is done over a region of 32 I/O ports. The base
 614  * ioport is called INTA or INTC, depending on docs/other drivers.
 615  *
 616  * The region of the 32 I/O ports is configured in POSIO0R...
 617  */
 618
 619 /* registers */
 620 #define ITE_887x_MISCR          0x9c
 621 #define ITE_887x_INTCBAR        0x78
 622 #define ITE_887x_UARTBAR        0x7c
 623 #define ITE_887x_PS0BAR         0x10
 624 #define ITE_887x_POSIO0         0x60
 625
 626 /* I/O space size */
 627 #define ITE_887x_IOSIZE         32
 628 /* I/O space size (bits 26-24; 8 bytes = 011b) */
 629 #define ITE_887x_POSIO_IOSIZE_8         (3 << 24)
 630 /* I/O space size (bits 26-24; 32 bytes = 101b) */
 631 #define ITE_887x_POSIO_IOSIZE_32        (5 << 24)
 632 /* Decoding speed (1 = slow, 2 = medium, 3 = fast) */
 633 #define ITE_887x_POSIO_SPEED            (3 << 29)
 634 /* enable IO_Space bit */
 635 #define ITE_887x_POSIO_ENABLE           (1 << 31)
 636
 637 static int pci_ite887x_init(struct pci_dev *dev)
 638 {
 639         /* inta_addr are the configuration addresses of the ITE */
 640         static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0,
 641                                                         0x200, 0x280, 0 };
 642         int ret, i, type;
 643         struct resource *iobase = NULL;
 644         u32 miscr, uartbar, ioport;
 645
 646         /* search for the base-ioport */
 647         i = 0;
 648         while (inta_addr[i] && iobase == NULL) {
 649                 iobase = request_region(inta_addr[i], ITE_887x_IOSIZE,
 650                                                                 "ite887x");
 651                 if (iobase != NULL) {
 652                         /* write POSIO0R - speed | size | ioport */
 653                         pci_write_config_dword(dev, ITE_887x_POSIO0,
 654                                 ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
 655                                 ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
 656                         /* write INTCBAR - ioport */
 657                         pci_write_config_dword(dev, ITE_887x_INTCBAR,
 658                                                                 inta_addr[i]);
 659                         ret = inb(inta_addr[i]);
 660                         if (ret != 0xff) {
 661                                 /* ioport connected */
 662                                 break;
 663                         }
 664                         release_region(iobase->start, ITE_887x_IOSIZE);
 665                         iobase = NULL;
 666                 }
 667                 i++;
 668         }
 669
 670         if (!inta_addr[i]) {
 671                 printk(KERN_ERR "ite887x: could not find iobase\n");
 672                 return -ENODEV;
 673         }
 674
 675         /* start of undocumented type checking (see parport_pc.c) */
 676         type = inb(iobase->start + 0x18) & 0x0f;
 677
 678         switch (type) {
 679         case 0x2:       /* ITE8871 (1P) */
 680         case 0xa:       /* ITE8875 (1P) */
 681                 ret = 0;
 682                 break;
 683         case 0xe:       /* ITE8872 (2S1P) */
 684                 ret = 2;
 685                 break;
 686         case 0x6:       /* ITE8873 (1S) */
 687                 ret = 1;
 688                 break;
 689         case 0x8:       /* ITE8874 (2S) */
 690                 ret = 2;
 691                 break;
 692         default:
 693                 moan_device("Unknown ITE887x", dev);
 694                 ret = -ENODEV;
 695         }
 696
 697         /* configure all serial ports */
 698         for (i = 0; i < ret; i++) {
 699                 /* read the I/O port from the device */
 700                 pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)),
 701                                                                 &ioport);
 702                 ioport &= 0x0000FF00;   /* the actual base address */
 703                 pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)),
 704                         ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
 705                         ITE_887x_POSIO_IOSIZE_8 | ioport);
 706
 707                 /* write the ioport to the UARTBAR */
 708                 pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar);
 709                 uartbar &= ~(0xffff << (16 * i));       /* clear half the reg */
 710                 uartbar |= (ioport << (16 * i));        /* set the ioport */
 711                 pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar);
 712
 713                 /* get current config */
 714                 pci_read_config_dword(dev, ITE_887x_MISCR, &miscr);
 715                 /* disable interrupts (UARTx_Routing[3:0]) */
 716                 miscr &= ~(0xf << (12 - 4 * i));
 717                 /* activate the UART (UARTx_En) */
 718                 miscr |= 1 << (23 - i);
 719                 /* write new config with activated UART */
 720                 pci_write_config_dword(dev, ITE_887x_MISCR, miscr);
 721         }
 722
 723         if (ret <= 0) {
 724                 /* the device has no UARTs if we get here */
 725                 release_region(iobase->start, ITE_887x_IOSIZE);
 726         }
 727
 728         return ret;
 729 }
 730
 731 static void __devexit pci_ite887x_exit(struct pci_dev *dev)
 732 {
 733         u32 ioport;
 734         /* the ioport is bit 0-15 in POSIO0R */
 735         pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport);
 736         ioport &= 0xffff;
 737         release_region(ioport, ITE_887x_IOSIZE);
 738 }
 739
 740 static int
 741 pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
 742                   struct uart_port *port, int idx)
 743 {
 744         unsigned int bar, offset = board->first_offset, maxnr;
 745
 746         bar = FL_GET_BASE(board->flags);
 747         if (board->flags & FL_BASE_BARS)
 748                 bar += idx;
 749         else
 750                 offset += idx * board->uart_offset;
 751
 752         maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
 753                 (board->reg_shift + 3);
 754
 755         if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
 756                 return 1;
 757
 758         return setup_port(priv, port, bar, offset, board->reg_shift);
 759 }
 760
 761 /* This should be in linux/pci_ids.h */
 762 #define PCI_VENDOR_ID_SBSMODULARIO      0x124B
 763 #define PCI_SUBVENDOR_ID_SBSMODULARIO   0x124B
 764 #define PCI_DEVICE_ID_OCTPRO            0x0001
 765 #define PCI_SUBDEVICE_ID_OCTPRO232      0x0108
 766 #define PCI_SUBDEVICE_ID_OCTPRO422      0x0208
 767 #define PCI_SUBDEVICE_ID_POCTAL232      0x0308
 768 #define PCI_SUBDEVICE_ID_POCTAL422      0x0408
 769
 770 /*
 771  * Master list of serial port init/setup/exit quirks.
 772  * This does not describe the general nature of the port.
 773  * (ie, baud base, number and location of ports, etc)
 774  *
 775  * This list is ordered alphabetically by vendor then device.
 776  * Specific entries must come before more generic entries.
 777  */
 778 static struct pci_serial_quirk pci_serial_quirks[] = {
 779         /*
 780         * ADDI-DATA GmbH communication cards <info@addi-data.com>
 781         */
 782         {
 783                 .vendor         = PCI_VENDOR_ID_ADDIDATA_OLD,
 784                 .device         = PCI_DEVICE_ID_ADDIDATA_APCI7800,
 785                 .subvendor      = PCI_ANY_ID,
 786                 .subdevice      = PCI_ANY_ID,
 787                 .setup          = addidata_apci7800_setup,
 788         },
 789         /*
 790          * AFAVLAB cards - these may be called via parport_serial
 791          *  It is not clear whether this applies to all products.
 792          */
 793         {
 794                 .vendor         = PCI_VENDOR_ID_AFAVLAB,
 795                 .device         = PCI_ANY_ID,
 796                 .subvendor      = PCI_ANY_ID,
 797                 .subdevice      = PCI_ANY_ID,
 798                 .setup          = afavlab_setup,
 799         },
 800         /*
 801          * HP Diva
 802          */
 803         {
 804                 .vendor         = PCI_VENDOR_ID_HP,
 805                 .device         = PCI_DEVICE_ID_HP_DIVA,
 806                 .subvendor      = PCI_ANY_ID,
 807                 .subdevice      = PCI_ANY_ID,
 808                 .init           = pci_hp_diva_init,
 809                 .setup          = pci_hp_diva_setup,
 810         },
 811         /*
 812          * Intel
 813          */
 814         {
 815                 .vendor         = PCI_VENDOR_ID_INTEL,
 816                 .device         = PCI_DEVICE_ID_INTEL_80960_RP,
 817                 .subvendor      = 0xe4bf,
 818                 .subdevice      = PCI_ANY_ID,
 819                 .init           = pci_inteli960ni_init,
 820                 .setup          = pci_default_setup,
 821         },
 822         /*
 823          * ITE
 824          */
 825         {
 826                 .vendor         = PCI_VENDOR_ID_ITE,
 827                 .device         = PCI_DEVICE_ID_ITE_8872,
 828                 .subvendor      = PCI_ANY_ID,
 829                 .subdevice      = PCI_ANY_ID,
 830                 .init           = pci_ite887x_init,
 831                 .setup          = pci_default_setup,
 832                 .exit           = __devexit_p(pci_ite887x_exit),
 833         },
 834         /*
 835          * Panacom
 836          */
 837         {
 838                 .vendor         = PCI_VENDOR_ID_PANACOM,
 839                 .device         = PCI_DEVICE_ID_PANACOM_QUADMODEM,
 840                 .subvendor      = PCI_ANY_ID,
 841                 .subdevice      = PCI_ANY_ID,
 842                 .init           = pci_plx9050_init,
 843                 .setup          = pci_default_setup,
 844                 .exit           = __devexit_p(pci_plx9050_exit),
 845         },
 846         {
 847                 .vendor         = PCI_VENDOR_ID_PANACOM,
 848                 .device         = PCI_DEVICE_ID_PANACOM_DUALMODEM,
 849                 .subvendor      = PCI_ANY_ID,
 850                 .subdevice      = PCI_ANY_ID,
 851                 .init           = pci_plx9050_init,
 852                 .setup          = pci_default_setup,
 853                 .exit           = __devexit_p(pci_plx9050_exit),
 854         },
 855         /*
 856          * PLX
 857          */
 858         {
 859                 .vendor         = PCI_VENDOR_ID_PLX,
 860                 .device         = PCI_DEVICE_ID_PLX_9030,
 861                 .subvendor      = PCI_SUBVENDOR_ID_PERLE,
 862                 .subdevice      = PCI_ANY_ID,
 863                 .setup          = pci_default_setup,
 864         },
 865         {
 866                 .vendor         = PCI_VENDOR_ID_PLX,
 867                 .device         = PCI_DEVICE_ID_PLX_9050,
 868                 .subvendor      = PCI_SUBVENDOR_ID_EXSYS,
 869                 .subdevice      = PCI_SUBDEVICE_ID_EXSYS_4055,
 870                 .init           = pci_plx9050_init,
 871                 .setup          = pci_default_setup,
 872                 .exit           = __devexit_p(pci_plx9050_exit),
 873         },
 874         {
 875                 .vendor         = PCI_VENDOR_ID_PLX,
 876                 .device         = PCI_DEVICE_ID_PLX_9050,
 877                 .subvendor      = PCI_SUBVENDOR_ID_KEYSPAN,
 878                 .subdevice      = PCI_SUBDEVICE_ID_KEYSPAN_SX2,
 879                 .init           = pci_plx9050_init,
 880                 .setup          = pci_default_setup,
 881                 .exit           = __devexit_p(pci_plx9050_exit),
 882         },
 883         {
 884                 .vendor         = PCI_VENDOR_ID_PLX,
 885                 .device         = PCI_DEVICE_ID_PLX_ROMULUS,
 886                 .subvendor      = PCI_VENDOR_ID_PLX,
 887                 .subdevice      = PCI_DEVICE_ID_PLX_ROMULUS,
 888                 .init           = pci_plx9050_init,
 889                 .setup          = pci_default_setup,
 890                 .exit           = __devexit_p(pci_plx9050_exit),
 891         },
 892         /*
 893          * SBS Technologies, Inc., PMC-OCTALPRO 232
 894          */
 895         {
 896                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 897                 .device         = PCI_DEVICE_ID_OCTPRO,
 898                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 899                 .subdevice      = PCI_SUBDEVICE_ID_OCTPRO232,
 900                 .init           = sbs_init,
 901                 .setup          = sbs_setup,
 902                 .exit           = __devexit_p(sbs_exit),
 903         },
 904         /*
 905          * SBS Technologies, Inc., PMC-OCTALPRO 422
 906          */
 907         {
 908                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 909                 .device         = PCI_DEVICE_ID_OCTPRO,
 910                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 911                 .subdevice      = PCI_SUBDEVICE_ID_OCTPRO422,
 912                 .init           = sbs_init,
 913                 .setup          = sbs_setup,
 914                 .exit           = __devexit_p(sbs_exit),
 915         },
 916         /*
 917          * SBS Technologies, Inc., P-Octal 232
 918          */
 919         {
 920                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 921                 .device         = PCI_DEVICE_ID_OCTPRO,
 922                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 923                 .subdevice      = PCI_SUBDEVICE_ID_POCTAL232,
 924                 .init           = sbs_init,
 925                 .setup          = sbs_setup,
 926                 .exit           = __devexit_p(sbs_exit),
 927         },
 928         /*
 929          * SBS Technologies, Inc., P-Octal 422
 930          */
 931         {
 932                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 933                 .device         = PCI_DEVICE_ID_OCTPRO,
 934                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 935                 .subdevice      = PCI_SUBDEVICE_ID_POCTAL422,
 936                 .init           = sbs_init,
 937                 .setup          = sbs_setup,
 938                 .exit           = __devexit_p(sbs_exit),
 939         },
 940         /*
 941          * SIIG cards - these may be called via parport_serial
 942          */
 943         {
 944                 .vendor         = PCI_VENDOR_ID_SIIG,
 945                 .device         = PCI_ANY_ID,
 946                 .subvendor      = PCI_ANY_ID,
 947                 .subdevice      = PCI_ANY_ID,
 948                 .init           = pci_siig_init,
 949                 .setup          = pci_siig_setup,
 950         },
 951         /*
 952          * Titan cards
 953          */
 954         {
 955                 .vendor         = PCI_VENDOR_ID_TITAN,
 956                 .device         = PCI_DEVICE_ID_TITAN_400L,
 957                 .subvendor      = PCI_ANY_ID,
 958                 .subdevice      = PCI_ANY_ID,
 959                 .setup          = titan_400l_800l_setup,
 960         },
 961         {
 962                 .vendor         = PCI_VENDOR_ID_TITAN,
 963                 .device         = PCI_DEVICE_ID_TITAN_800L,
 964                 .subvendor      = PCI_ANY_ID,
 965                 .subdevice      = PCI_ANY_ID,
 966                 .setup          = titan_400l_800l_setup,
 967         },
 968         /*
 969          * Timedia cards
 970          */
 971         {
 972                 .vendor         = PCI_VENDOR_ID_TIMEDIA,
 973                 .device         = PCI_DEVICE_ID_TIMEDIA_1889,
 974                 .subvendor      = PCI_VENDOR_ID_TIMEDIA,
 975                 .subdevice      = PCI_ANY_ID,
 976                 .init           = pci_timedia_init,
 977                 .setup          = pci_timedia_setup,
 978         },
 979         {
 980                 .vendor         = PCI_VENDOR_ID_TIMEDIA,
 981                 .device         = PCI_ANY_ID,
 982                 .subvendor      = PCI_ANY_ID,
 983                 .subdevice      = PCI_ANY_ID,
 984                 .setup          = pci_timedia_setup,
 985         },
 986         /*
 987          * Xircom cards
 988          */
 989         {
 990                 .vendor         = PCI_VENDOR_ID_XIRCOM,
 991                 .device         = PCI_DEVICE_ID_XIRCOM_X3201_MDM,
 992                 .subvendor      = PCI_ANY_ID,
 993                 .subdevice      = PCI_ANY_ID,
 994                 .init           = pci_xircom_init,
 995                 .setup          = pci_default_setup,
 996         },
 997         /*
 998          * Netmos cards - these may be called via parport_serial
 999          */
1000         {
1001                 .vendor         = PCI_VENDOR_ID_NETMOS,
1002                 .device         = PCI_ANY_ID,
1003                 .subvendor      = PCI_ANY_ID,
1004                 .subdevice      = PCI_ANY_ID,
1005                 .init           = pci_netmos_init,
1006                 .setup          = pci_default_setup,
1007         },
1008         /*
1009          * Default "match everything" terminator entry
1010          */
1011         {
1012                 .vendor         = PCI_ANY_ID,
1013                 .device         = PCI_ANY_ID,
1014                 .subvendor      = PCI_ANY_ID,
1015                 .subdevice      = PCI_ANY_ID,
1016                 .setup          = pci_default_setup,
1017         }
1018 };
1019
1020 static inline int quirk_id_matches(u32 quirk_id, u32 dev_id)
1021 {
1022         return quirk_id == PCI_ANY_ID || quirk_id == dev_id;
1023 }
1024
1025 static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
1026 {
1027         struct pci_serial_quirk *quirk;
1028
1029         for (quirk = pci_serial_quirks; ; quirk++)
1030                 if (quirk_id_matches(quirk->vendor, dev->vendor) &&
1031                     quirk_id_matches(quirk->device, dev->device) &&
1032                     quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
1033                     quirk_id_matches(quirk->subdevice, dev->subsystem_device))
1034                         break;
1035         return quirk;
1036 }
1037
1038 static inline int get_pci_irq(struct pci_dev *dev,
1039                                 struct pciserial_board *board)
1040 {
1041         if (board->flags & FL_NOIRQ)
1042                 return 0;
1043         else
1044                 return dev->irq;
1045 }
1046
1047 /*
1048  * This is the configuration table for all of the PCI serial boards
1049  * which we support.  It is directly indexed by the pci_board_num_t enum
1050  * value, which is encoded in the pci_device_id PCI probe table's
1051  * driver_data member.
1052  *
1053  * The makeup of these names are:
1054  *  pbn_bn{_bt}_n_baud{_offsetinhex}
1055  *
1056  *  bn          = PCI BAR number
1057  *  bt          = Index using PCI BARs
1058  *  n           = number of serial ports
1059  *  baud        = baud rate
1060  *  offsetinhex = offset for each sequential port (in hex)
1061  *
1062  * This table is sorted by (in order): bn, bt, baud, offsetindex, n.
1063  *
1064  * Please note: in theory if n = 1, _bt infix should make no difference.
1065  * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200
1066  */
1067 enum pci_board_num_t {
1068         pbn_default = 0,
1069
1070         pbn_b0_1_115200,
1071         pbn_b0_2_115200,
1072         pbn_b0_4_115200,
1073         pbn_b0_5_115200,
1074         pbn_b0_8_115200,
1075
1076         pbn_b0_1_921600,
1077         pbn_b0_2_921600,
1078         pbn_b0_4_921600,
1079
1080         pbn_b0_2_1130000,
1081
1082         pbn_b0_4_1152000,
1083
1084         pbn_b0_2_1843200,
1085         pbn_b0_4_1843200,
1086
1087         pbn_b0_2_1843200_200,
1088         pbn_b0_4_1843200_200,
1089         pbn_b0_8_1843200_200,
1090
1091         pbn_b0_bt_1_115200,
1092         pbn_b0_bt_2_115200,
1093         pbn_b0_bt_8_115200,
1094
1095         pbn_b0_bt_1_460800,
1096         pbn_b0_bt_2_460800,
1097         pbn_b0_bt_4_460800,
1098
1099         pbn_b0_bt_1_921600,
1100         pbn_b0_bt_2_921600,
1101         pbn_b0_bt_4_921600,
1102         pbn_b0_bt_8_921600,
1103
1104         pbn_b1_1_115200,
1105         pbn_b1_2_115200,
1106         pbn_b1_4_115200,
1107         pbn_b1_8_115200,
1108
1109         pbn_b1_1_921600,
1110         pbn_b1_2_921600,
1111         pbn_b1_4_921600,
1112         pbn_b1_8_921600,
1113
1114         pbn_b1_2_1250000,
1115
1116         pbn_b1_bt_1_115200,
1117         pbn_b1_bt_2_921600,
1118
1119         pbn_b1_1_1382400,
1120         pbn_b1_2_1382400,
1121         pbn_b1_4_1382400,
1122         pbn_b1_8_1382400,
1123
1124         pbn_b2_1_115200,
1125         pbn_b2_2_115200,
1126         pbn_b2_4_115200,
1127         pbn_b2_8_115200,
1128
1129         pbn_b2_1_460800,
1130         pbn_b2_4_460800,
1131         pbn_b2_8_460800,
1132         pbn_b2_16_460800,
1133
1134         pbn_b2_1_921600,
1135         pbn_b2_4_921600,
1136         pbn_b2_8_921600,
1137
1138         pbn_b2_bt_1_115200,
1139         pbn_b2_bt_2_115200,
1140         pbn_b2_bt_4_115200,
1141
1142         pbn_b2_bt_2_921600,
1143         pbn_b2_bt_4_921600,
1144
1145         pbn_b3_2_115200,
1146         pbn_b3_4_115200,
1147         pbn_b3_8_115200,
1148
1149         /*
1150          * Board-specific versions.
1151          */
1152         pbn_panacom,
1153         pbn_panacom2,
1154         pbn_panacom4,
1155         pbn_exsys_4055,
1156         pbn_plx_romulus,
1157         pbn_oxsemi,
1158         pbn_intel_i960,
1159         pbn_sgi_ioc3,
1160         pbn_computone_4,
1161         pbn_computone_6,
1162         pbn_computone_8,
1163         pbn_sbsxrsio,
1164         pbn_exar_XR17C152,
1165         pbn_exar_XR17C154,
1166         pbn_exar_XR17C158,
1167         pbn_pasemi_1682M,
1168 };
1169
1170 /*
1171  * uart_offset - the space between channels
1172  * reg_shift   - describes how the UART registers are mapped
1173  *               to PCI memory by the card.
1174  * For example IER register on SBS, Inc. PMC-OctPro is located at
1175  * offset 0x10 from the UART base, while UART_IER is defined as 1
1176  * in include/linux/serial_reg.h,
1177  * see first lines of serial_in() and serial_out() in 8250.c
1178 */
1179
1180 static struct pciserial_board pci_boards[] __devinitdata = {
1181         [pbn_default] = {
1182                 .flags          = FL_BASE0,
1183                 .num_ports      = 1,
1184                 .base_baud      = 115200,
1185                 .uart_offset    = 8,
1186         },
1187         [pbn_b0_1_115200] = {
1188                 .flags          = FL_BASE0,
1189                 .num_ports      = 1,
1190                 .base_baud      = 115200,
1191                 .uart_offset    = 8,
1192         },
1193         [pbn_b0_2_115200] = {
1194                 .flags          = FL_BASE0,
1195                 .num_ports      = 2,
1196                 .base_baud      = 115200,
1197                 .uart_offset    = 8,
1198         },
1199         [pbn_b0_4_115200] = {
1200                 .flags          = FL_BASE0,
1201                 .num_ports      = 4,
1202                 .base_baud      = 115200,
1203                 .uart_offset    = 8,
1204         },
1205         [pbn_b0_5_115200] = {
1206                 .flags          = FL_BASE0,
1207                 .num_ports      = 5,
1208                 .base_baud      = 115200,
1209                 .uart_offset    = 8,
1210         },
1211         [pbn_b0_8_115200] = {
1212                 .flags          = FL_BASE0,
1213                 .num_ports      = 8,
1214                 .base_baud      = 115200,
1215                 .uart_offset    = 8,
1216         },
1217         [pbn_b0_1_921600] = {
1218                 .flags          = FL_BASE0,
1219                 .num_ports      = 1,
1220                 .base_baud      = 921600,
1221                 .uart_offset    = 8,
1222         },
1223         [pbn_b0_2_921600] = {
1224                 .flags          = FL_BASE0,
1225                 .num_ports      = 2,
1226                 .base_baud      = 921600,
1227                 .uart_offset    = 8,
1228         },
1229         [pbn_b0_4_921600] = {
1230                 .flags          = FL_BASE0,
1231                 .num_ports      = 4,
1232                 .base_baud      = 921600,
1233                 .uart_offset    = 8,
1234         },
1235
1236         [pbn_b0_2_1130000] = {
1237                 .flags          = FL_BASE0,
1238                 .num_ports      = 2,
1239                 .base_baud      = 1130000,
1240                 .uart_offset    = 8,
1241         },
1242
1243         [pbn_b0_4_1152000] = {
1244                 .flags          = FL_BASE0,
1245                 .num_ports      = 4,
1246                 .base_baud      = 1152000,
1247                 .uart_offset    = 8,
1248         },
1249
1250         [pbn_b0_2_1843200] = {
1251                 .flags          = FL_BASE0,
1252                 .num_ports      = 2,
1253                 .base_baud      = 1843200,
1254                 .uart_offset    = 8,
1255         },
1256         [pbn_b0_4_1843200] = {
1257                 .flags          = FL_BASE0,
1258                 .num_ports      = 4,
1259                 .base_baud      = 1843200,
1260                 .uart_offset    = 8,
1261         },
1262
1263         [pbn_b0_2_1843200_200] = {
1264                 .flags          = FL_BASE0,
1265                 .num_ports      = 2,
1266                 .base_baud      = 1843200,
1267                 .uart_offset    = 0x200,
1268         },
1269         [pbn_b0_4_1843200_200] = {
1270                 .flags          = FL_BASE0,
1271                 .num_ports      = 4,
1272                 .base_baud      = 1843200,
1273                 .uart_offset    = 0x200,
1274         },
1275         [pbn_b0_8_1843200_200] = {
1276                 .flags          = FL_BASE0,
1277                 .num_ports      = 8,
1278                 .base_baud      = 1843200,
1279                 .uart_offset    = 0x200,
1280         },
1281
1282         [pbn_b0_bt_1_115200] = {
1283                 .flags          = FL_BASE0|FL_BASE_BARS,
1284                 .num_ports      = 1,
1285                 .base_baud      = 115200,
1286                 .uart_offset    = 8,
1287         },
1288         [pbn_b0_bt_2_115200] = {
1289                 .flags          = FL_BASE0|FL_BASE_BARS,
1290                 .num_ports      = 2,
1291                 .base_baud      = 115200,
1292                 .uart_offset    = 8,
1293         },
1294         [pbn_b0_bt_8_115200] = {
1295                 .flags          = FL_BASE0|FL_BASE_BARS,
1296                 .num_ports      = 8,
1297                 .base_baud      = 115200,
1298                 .uart_offset    = 8,
1299         },
1300
1301         [pbn_b0_bt_1_460800] = {
1302                 .flags          = FL_BASE0|FL_BASE_BARS,
1303                 .num_ports      = 1,
1304                 .base_baud      = 460800,
1305                 .uart_offset    = 8,
1306         },
1307         [pbn_b0_bt_2_460800] = {
1308                 .flags          = FL_BASE0|FL_BASE_BARS,
1309                 .num_ports      = 2,
1310                 .base_baud      = 460800,
1311                 .uart_offset    = 8,
1312         },
1313         [pbn_b0_bt_4_460800] = {
1314                 .flags          = FL_BASE0|FL_BASE_BARS,
1315                 .num_ports      = 4,
1316                 .base_baud      = 460800,
1317                 .uart_offset    = 8,
1318         },
1319
1320         [pbn_b0_bt_1_921600] = {
1321                 .flags          = FL_BASE0|FL_BASE_BARS,
1322                 .num_ports      = 1,
1323                 .base_baud      = 921600,
1324                 .uart_offset    = 8,
1325         },
1326         [pbn_b0_bt_2_921600] = {
1327                 .flags          = FL_BASE0|FL_BASE_BARS,
1328                 .num_ports      = 2,
1329                 .base_baud      = 921600,
1330                 .uart_offset    = 8,
1331         },
1332         [pbn_b0_bt_4_921600] = {
1333                 .flags          = FL_BASE0|FL_BASE_BARS,
1334                 .num_ports      = 4,
1335                 .base_baud      = 921600,
1336                 .uart_offset    = 8,
1337         },
1338         [pbn_b0_bt_8_921600] = {
1339                 .flags          = FL_BASE0|FL_BASE_BARS,
1340                 .num_ports      = 8,
1341                 .base_baud      = 921600,
1342                 .uart_offset    = 8,
1343         },
1344
1345         [pbn_b1_1_115200] = {
1346                 .flags          = FL_BASE1,
1347                 .num_ports      = 1,
1348                 .base_baud      = 115200,
1349                 .uart_offset    = 8,
1350         },
1351         [pbn_b1_2_115200] = {
1352                 .flags          = FL_BASE1,
1353                 .num_ports      = 2,
1354                 .base_baud      = 115200,
1355                 .uart_offset    = 8,
1356         },
1357         [pbn_b1_4_115200] = {
1358                 .flags          = FL_BASE1,
1359                 .num_ports      = 4,
1360                 .base_baud      = 115200,
1361                 .uart_offset    = 8,
1362         },
1363         [pbn_b1_8_115200] = {
1364                 .flags          = FL_BASE1,
1365                 .num_ports      = 8,
1366                 .base_baud      = 115200,
1367                 .uart_offset    = 8,
1368         },
1369
1370         [pbn_b1_1_921600] = {
1371                 .flags          = FL_BASE1,
1372                 .num_ports      = 1,
1373                 .base_baud      = 921600,
1374                 .uart_offset    = 8,
1375         },
1376         [pbn_b1_2_921600] = {
1377                 .flags          = FL_BASE1,
1378                 .num_ports      = 2,
1379                 .base_baud      = 921600,
1380                 .uart_offset    = 8,
1381         },
1382         [pbn_b1_4_921600] = {
1383                 .flags          = FL_BASE1,
1384                 .num_ports      = 4,
1385                 .base_baud      = 921600,
1386                 .uart_offset    = 8,
1387         },
1388         [pbn_b1_8_921600] = {
1389                 .flags          = FL_BASE1,
1390                 .num_ports      = 8,
1391                 .base_baud      = 921600,
1392                 .uart_offset    = 8,
1393         },
1394         [pbn_b1_2_1250000] = {
1395                 .flags          = FL_BASE1,
1396                 .num_ports      = 2,
1397                 .base_baud      = 1250000,
1398                 .uart_offset    = 8,
1399         },
1400
1401         [pbn_b1_bt_1_115200] = {
1402                 .flags          = FL_BASE1|FL_BASE_BARS,
1403                 .num_ports      = 1,
1404                 .base_baud      = 115200,
1405                 .uart_offset    = 8,
1406         },
1407
1408         [pbn_b1_bt_2_921600] = {
1409                 .flags          = FL_BASE1|FL_BASE_BARS,
1410                 .num_ports      = 2,
1411                 .base_baud      = 921600,
1412                 .uart_offset    = 8,
1413         },
1414
1415         [pbn_b1_1_1382400] = {
1416                 .flags          = FL_BASE1,
1417                 .num_ports      = 1,
1418                 .base_baud      = 1382400,
1419                 .uart_offset    = 8,
1420         },
1421         [pbn_b1_2_1382400] = {
1422                 .flags          = FL_BASE1,
1423                 .num_ports      = 2,
1424                 .base_baud      = 1382400,
1425                 .uart_offset    = 8,
1426         },
1427         [pbn_b1_4_1382400] = {
1428                 .flags          = FL_BASE1,
1429                 .num_ports      = 4,
1430                 .base_baud      = 1382400,
1431                 .uart_offset    = 8,
1432         },
1433         [pbn_b1_8_1382400] = {
1434                 .flags          = FL_BASE1,
1435                 .num_ports      = 8,
1436                 .base_baud      = 1382400,
1437                 .uart_offset    = 8,
1438         },
1439
1440         [pbn_b2_1_115200] = {
1441                 .flags          = FL_BASE2,
1442                 .num_ports      = 1,
1443                 .base_baud      = 115200,
1444                 .uart_offset    = 8,
1445         },
1446         [pbn_b2_2_115200] = {
1447                 .flags          = FL_BASE2,
1448                 .num_ports      = 2,
1449                 .base_baud      = 115200,
1450                 .uart_offset    = 8,
1451         },
1452         [pbn_b2_4_115200] = {
1453                 .flags          = FL_BASE2,
1454                 .num_ports      = 4,
1455                 .base_baud      = 115200,
1456                 .uart_offset    = 8,
1457         },
1458         [pbn_b2_8_115200] = {
1459                 .flags          = FL_BASE2,
1460                 .num_ports      = 8,
1461                 .base_baud      = 115200,
1462                 .uart_offset    = 8,
1463         },
1464
1465         [pbn_b2_1_460800] = {
1466                 .flags          = FL_BASE2,
1467                 .num_ports      = 1,
1468                 .base_baud      = 460800,
1469                 .uart_offset    = 8,
1470         },
1471         [pbn_b2_4_460800] = {
1472                 .flags          = FL_BASE2,
1473                 .num_ports      = 4,
1474                 .base_baud      = 460800,
1475                 .uart_offset    = 8,
1476         },
1477         [pbn_b2_8_460800] = {
1478                 .flags          = FL_BASE2,
1479                 .num_ports      = 8,
1480                 .base_baud      = 460800,
1481                 .uart_offset    = 8,
1482         },
1483         [pbn_b2_16_460800] = {
1484                 .flags          = FL_BASE2,
1485                 .num_ports      = 16,
1486                 .base_baud      = 460800,
1487                 .uart_offset    = 8,
1488          },
1489
1490         [pbn_b2_1_921600] = {
1491                 .flags          = FL_BASE2,
1492                 .num_ports      = 1,
1493                 .base_baud      = 921600,
1494                 .uart_offset    = 8,
1495         },
1496         [pbn_b2_4_921600] = {
1497                 .flags          = FL_BASE2,
1498                 .num_ports      = 4,
1499                 .base_baud      = 921600,
1500                 .uart_offset    = 8,
1501         },
1502         [pbn_b2_8_921600] = {
1503                 .flags          = FL_BASE2,
1504                 .num_ports      = 8,
1505                 .base_baud      = 921600,
1506                 .uart_offset    = 8,
1507         },
1508
1509         [pbn_b2_bt_1_115200] = {
1510                 .flags          = FL_BASE2|FL_BASE_BARS,
1511                 .num_ports      = 1,
1512                 .base_baud      = 115200,
1513                 .uart_offset    = 8,
1514         },
1515         [pbn_b2_bt_2_115200] = {
1516                 .flags          = FL_BASE2|FL_BASE_BARS,
1517                 .num_ports      = 2,
1518                 .base_baud      = 115200,
1519                 .uart_offset    = 8,
1520         },
1521         [pbn_b2_bt_4_115200] = {
1522                 .flags          = FL_BASE2|FL_BASE_BARS,
1523                 .num_ports      = 4,
1524                 .base_baud      = 115200,
1525                 .uart_offset    = 8,
1526         },
1527
1528         [pbn_b2_bt_2_921600] = {
1529                 .flags          = FL_BASE2|FL_BASE_BARS,
1530                 .num_ports      = 2,
1531                 .base_baud      = 921600,
1532                 .uart_offset    = 8,
1533         },
1534         [pbn_b2_bt_4_921600] = {
1535                 .flags          = FL_BASE2|FL_BASE_BARS,
1536                 .num_ports      = 4,
1537                 .base_baud      = 921600,
1538                 .uart_offset    = 8,
1539         },
1540
1541         [pbn_b3_2_115200] = {
1542                 .flags          = FL_BASE3,
1543                 .num_ports      = 2,
1544                 .base_baud      = 115200,
1545                 .uart_offset    = 8,
1546         },
1547         [pbn_b3_4_115200] = {
1548                 .flags          = FL_BASE3,
1549                 .num_ports      = 4,
1550                 .base_baud      = 115200,
1551                 .uart_offset    = 8,
1552         },
1553         [pbn_b3_8_115200] = {
1554                 .flags          = FL_BASE3,
1555                 .num_ports      = 8,
1556                 .base_baud      = 115200,
1557                 .uart_offset    = 8,
1558         },
1559
1560         /*
1561          * Entries following this are board-specific.
1562          */
1563
1564         /*
1565          * Panacom - IOMEM
1566          */
1567         [pbn_panacom] = {
1568                 .flags          = FL_BASE2,
1569                 .num_ports      = 2,
1570                 .base_baud      = 921600,
1571                 .uart_offset    = 0x400,
1572                 .reg_shift      = 7,
1573         },
1574         [pbn_panacom2] = {
1575                 .flags          = FL_BASE2|FL_BASE_BARS,
1576                 .num_ports      = 2,
1577                 .base_baud      = 921600,
1578                 .uart_offset    = 0x400,
1579                 .reg_shift      = 7,
1580         },
1581         [pbn_panacom4] = {
1582                 .flags          = FL_BASE2|FL_BASE_BARS,
1583                 .num_ports      = 4,
1584                 .base_baud      = 921600,
1585                 .uart_offset    = 0x400,
1586                 .reg_shift      = 7,
1587         },
1588
1589         [pbn_exsys_4055] = {
1590                 .flags          = FL_BASE2,
1591                 .num_ports      = 4,
1592                 .base_baud      = 115200,
1593                 .uart_offset    = 8,
1594         },
1595
1596         /* I think this entry is broken - the first_offset looks wrong --rmk */
1597         [pbn_plx_romulus] = {
1598                 .flags          = FL_BASE2,
1599                 .num_ports      = 4,
1600                 .base_baud      = 921600,
1601                 .uart_offset    = 8 << 2,
1602                 .reg_shift      = 2,
1603                 .first_offset   = 0x03,
1604         },
1605
1606         /*
1607          * This board uses the size of PCI Base region 0 to
1608          * signal now many ports are available
1609          */
1610         [pbn_oxsemi] = {
1611                 .flags          = FL_BASE0|FL_REGION_SZ_CAP,
1612                 .num_ports      = 32,
1613                 .base_baud      = 115200,
1614                 .uart_offset    = 8,
1615         },
1616
1617         /*
1618          * EKF addition for i960 Boards form EKF with serial port.
1619          * Max 256 ports.
1620          */
1621         [pbn_intel_i960] = {
1622                 .flags          = FL_BASE0,
1623                 .num_ports      = 32,
1624                 .base_baud      = 921600,
1625                 .uart_offset    = 8 << 2,
1626                 .reg_shift      = 2,
1627                 .first_offset   = 0x10000,
1628         },
1629         [pbn_sgi_ioc3] = {
1630                 .flags          = FL_BASE0|FL_NOIRQ,
1631                 .num_ports      = 1,
1632                 .base_baud      = 458333,
1633                 .uart_offset    = 8,
1634                 .reg_shift      = 0,
1635                 .first_offset   = 0x20178,
1636         },
1637
1638         /*
1639          * Computone - uses IOMEM.
1640          */
1641         [pbn_computone_4] = {
1642                 .flags          = FL_BASE0,
1643                 .num_ports      = 4,
1644                 .base_baud      = 921600,
1645                 .uart_offset    = 0x40,
1646                 .reg_shift      = 2,
1647                 .first_offset   = 0x200,
1648         },
1649         [pbn_computone_6] = {
1650                 .flags          = FL_BASE0,
1651                 .num_ports      = 6,
1652                 .base_baud      = 921600,
1653                 .uart_offset    = 0x40,
1654                 .reg_shift      = 2,
1655                 .first_offset   = 0x200,
1656         },
1657         [pbn_computone_8] = {
1658                 .flags          = FL_BASE0,
1659                 .num_ports      = 8,
1660                 .base_baud      = 921600,
1661                 .uart_offset    = 0x40,
1662                 .reg_shift      = 2,
1663                 .first_offset   = 0x200,
1664         },
1665         [pbn_sbsxrsio] = {
1666                 .flags          = FL_BASE0,
1667                 .num_ports      = 8,
1668                 .base_baud      = 460800,
1669                 .uart_offset    = 256,
1670                 .reg_shift      = 4,
1671         },
1672         /*
1673          * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
1674          *  Only basic 16550A support.
1675          *  XR17C15[24] are not tested, but they should work.
1676          */
1677         [pbn_exar_XR17C152] = {
1678                 .flags          = FL_BASE0,
1679                 .num_ports      = 2,
1680                 .base_baud      = 921600,
1681                 .uart_offset    = 0x200,
1682         },
1683         [pbn_exar_XR17C154] = {
1684                 .flags          = FL_BASE0,
1685                 .num_ports      = 4,
1686                 .base_baud      = 921600,
1687                 .uart_offset    = 0x200,
1688         },
1689         [pbn_exar_XR17C158] = {
1690                 .flags          = FL_BASE0,
1691                 .num_ports      = 8,
1692                 .base_baud      = 921600,
1693                 .uart_offset    = 0x200,
1694         },
1695         /*
1696          * PA Semi PWRficient PA6T-1682M on-chip UART
1697          */
1698         [pbn_pasemi_1682M] = {
1699                 .flags          = FL_BASE0,
1700                 .num_ports      = 1,
1701                 .base_baud      = 8333333,
1702         },
1703 };
1704
1705 static const struct pci_device_id softmodem_blacklist[] = {
1706         { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
1707 };
1708
1709 /*
1710  * Given a complete unknown PCI device, try to use some heuristics to
1711  * guess what the configuration might be, based on the pitiful PCI
1712  * serial specs.  Returns 0 on success, 1 on failure.
1713  */
1714 static int __devinit
1715 serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
1716 {
1717         const struct pci_device_id *blacklist;
1718         int num_iomem, num_port, first_port = -1, i;
1719
1720         /*
1721          * If it is not a communications device or the programming
1722          * interface is greater than 6, give up.
1723          *
1724          * (Should we try to make guesses for multiport serial devices
1725          * later?)
1726          */
1727         if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
1728              ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
1729             (dev->class & 0xff) > 6)
1730                 return -ENODEV;
1731
1732         /*
1733          * Do not access blacklisted devices that are known not to
1734          * feature serial ports.
1735          */
1736         for (blacklist = softmodem_blacklist;
1737              blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist);
1738              blacklist++) {
1739                 if (dev->vendor == blacklist->vendor &&
1740                     dev->device == blacklist->device)
1741                         return -ENODEV;
1742         }
1743
1744         num_iomem = num_port = 0;
1745         for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1746                 if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
1747                         num_port++;
1748                         if (first_port == -1)
1749                                 first_port = i;
1750                 }
1751                 if (pci_resource_flags(dev, i) & IORESOURCE_MEM)
1752                         num_iomem++;
1753         }
1754
1755         /*
1756          * If there is 1 or 0 iomem regions, and exactly one port,
1757          * use it.  We guess the number of ports based on the IO
1758          * region size.
1759          */
1760         if (num_iomem <= 1 && num_port == 1) {
1761                 board->flags = first_port;
1762                 board->num_ports = pci_resource_len(dev, first_port) / 8;
1763                 return 0;
1764         }
1765
1766         /*
1767          * Now guess if we've got a board which indexes by BARs.
1768          * Each IO BAR should be 8 bytes, and they should follow
1769          * consecutively.
1770          */
1771         first_port = -1;
1772         num_port = 0;
1773         for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1774                 if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
1775                     pci_resource_len(dev, i) == 8 &&
1776                     (first_port == -1 || (first_port + num_port) == i)) {
1777                         num_port++;
1778                         if (first_port == -1)
1779                                 first_port = i;
1780                 }
1781         }
1782
1783         if (num_port > 1) {
1784                 board->flags = first_port | FL_BASE_BARS;
1785                 board->num_ports = num_port;
1786                 return 0;
1787         }
1788
1789         return -ENODEV;
1790 }
1791
1792 static inline int
1793 serial_pci_matches(struct pciserial_board *board,
1794                    struct pciserial_board *guessed)
1795 {
1796         return
1797             board->num_ports == guessed->num_ports &&
1798             board->base_baud == guessed->base_baud &&
1799             board->uart_offset == guessed->uart_offset &&
1800             board->reg_shift == guessed->reg_shift &&
1801             board->first_offset == guessed->first_offset;
1802 }
1803
1804 struct serial_private *
1805 pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board)
1806 {
1807         struct uart_port serial_port;
1808         struct serial_private *priv;
1809         struct pci_serial_quirk *quirk;
1810         int rc, nr_ports, i;
1811
1812         nr_ports = board->num_ports;
1813
1814         /*
1815          * Find an init and setup quirks.
1816          */
1817         quirk = find_quirk(dev);
1818
1819         /*
1820          * Run the new-style initialization function.
1821          * The initialization function returns:
1822          *  <0  - error
1823          *   0  - use board->num_ports
1824          *  >0  - number of ports
1825          */
1826         if (quirk->init) {
1827                 rc = quirk->init(dev);
1828                 if (rc < 0) {
1829                         priv = ERR_PTR(rc);
1830                         goto err_out;
1831                 }
1832                 if (rc)
1833                         nr_ports = rc;
1834         }
1835
1836         priv = kzalloc(sizeof(struct serial_private) +
1837                        sizeof(unsigned int) * nr_ports,
1838                        GFP_KERNEL);
1839         if (!priv) {
1840                 priv = ERR_PTR(-ENOMEM);
1841                 goto err_deinit;
1842         }
1843
1844         priv->dev = dev;
1845         priv->quirk = quirk;
1846
1847         memset(&serial_port, 0, sizeof(struct uart_port));
1848         serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
1849         serial_port.uartclk = board->base_baud * 16;
1850         serial_port.irq = get_pci_irq(dev, board);
1851         serial_port.dev = &dev->dev;
1852
1853         for (i = 0; i < nr_ports; i++) {
1854                 if (quirk->setup(priv, board, &serial_port, i))
1855                         break;
1856
1857 #ifdef SERIAL_DEBUG_PCI
1858                 printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n",
1859                        serial_port.iobase, serial_port.irq, serial_port.iotype);
1860 #endif
1861
1862                 priv->line[i] = serial8250_register_port(&serial_port);
1863                 if (priv->line[i] < 0) {
1864                         printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
1865                         break;
1866                 }
1867         }
1868         priv->nr = i;
1869         return priv;
1870
1871 err_deinit:
1872         if (quirk->exit)
1873                 quirk->exit(dev);
1874 err_out:
1875         return priv;
1876 }
1877 EXPORT_SYMBOL_GPL(pciserial_init_ports);
1878
1879 void pciserial_remove_ports(struct serial_private *priv)
1880 {
1881         struct pci_serial_quirk *quirk;
1882         int i;
1883
1884         for (i = 0; i < priv->nr; i++)
1885                 serial8250_unregister_port(priv->line[i]);
1886
1887         for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1888                 if (priv->remapped_bar[i])
1889                         iounmap(priv->remapped_bar[i]);
1890                 priv->remapped_bar[i] = NULL;
1891         }
1892
1893         /*
1894          * Find the exit quirks.
1895          */
1896         quirk = find_quirk(priv->dev);
1897         if (quirk->exit)
1898                 quirk->exit(priv->dev);
1899
1900         kfree(priv);
1901 }
1902 EXPORT_SYMBOL_GPL(pciserial_remove_ports);
1903
1904 void pciserial_suspend_ports(struct serial_private *priv)
1905 {
1906         int i;
1907
1908         for (i = 0; i < priv->nr; i++)
1909                 if (priv->line[i] >= 0)
1910                         serial8250_suspend_port(priv->line[i]);
1911 }
1912 EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
1913
1914 void pciserial_resume_ports(struct serial_private *priv)
1915 {
1916         int i;
1917
1918         /*
1919          * Ensure that the board is correctly configured.
1920          */
1921         if (priv->quirk->init)
1922                 priv->quirk->init(priv->dev);
1923
1924         for (i = 0; i < priv->nr; i++)
1925                 if (priv->line[i] >= 0)
1926                         serial8250_resume_port(priv->line[i]);
1927 }
1928 EXPORT_SYMBOL_GPL(pciserial_resume_ports);
1929
1930 /*
1931  * Probe one serial board.  Unfortunately, there is no rhyme nor reason
1932  * to the arrangement of serial ports on a PCI card.
1933  */
1934 static int __devinit
1935 pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
1936 {
1937         struct serial_private *priv;
1938         struct pciserial_board *board, tmp;
1939         int rc;
1940
1941         if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
1942                 printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
1943                         ent->driver_data);
1944                 return -EINVAL;
1945         }
1946
1947         board = &pci_boards[ent->driver_data];
1948
1949         rc = pci_enable_device(dev);
1950         if (rc)
1951                 return rc;
1952
1953         if (ent->driver_data == pbn_default) {
1954                 /*
1955                  * Use a copy of the pci_board entry for this;
1956                  * avoid changing entries in the table.
1957                  */
1958                 memcpy(&tmp, board, sizeof(struct pciserial_board));
1959                 board = &tmp;
1960
1961                 /*
1962                  * We matched one of our class entries.  Try to
1963                  * determine the parameters of this board.
1964                  */
1965                 rc = serial_pci_guess_board(dev, board);
1966                 if (rc)
1967                         goto disable;
1968         } else {
1969                 /*
1970                  * We matched an explicit entry.  If we are able to
1971                  * detect this boards settings with our heuristic,
1972                  * then we no longer need this entry.
1973                  */
1974                 memcpy(&tmp, &pci_boards[pbn_default],
1975                        sizeof(struct pciserial_board));
1976                 rc = serial_pci_guess_board(dev, &tmp);
1977                 if (rc == 0 && serial_pci_matches(board, &tmp))
1978                         moan_device("Redundant entry in serial pci_table.",
1979                                     dev);
1980         }
1981
1982         priv = pciserial_init_ports(dev, board);
1983         if (!IS_ERR(priv)) {
1984                 pci_set_drvdata(dev, priv);
1985                 return 0;
1986         }
1987
1988         rc = PTR_ERR(priv);
1989
1990  disable:
1991         pci_disable_device(dev);
1992         return rc;
1993 }
1994
1995 static void __devexit pciserial_remove_one(struct pci_dev *dev)
1996 {
1997         struct serial_private *priv = pci_get_drvdata(dev);
1998
1999         pci_set_drvdata(dev, NULL);
2000
2001         pciserial_remove_ports(priv);
2002
2003         pci_disable_device(dev);
2004 }
2005
2006 #ifdef CONFIG_PM
2007 static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
2008 {
2009         struct serial_private *priv = pci_get_drvdata(dev);
2010
2011         if (priv)
2012                 pciserial_suspend_ports(priv);
2013
2014         pci_save_state(dev);
2015         pci_set_power_state(dev, pci_choose_state(dev, state));
2016         return 0;
2017 }
2018
2019 static int pciserial_resume_one(struct pci_dev *dev)
2020 {
2021         int err;
2022         struct serial_private *priv = pci_get_drvdata(dev);
2023
2024         pci_set_power_state(dev, PCI_D0);
2025         pci_restore_state(dev);
2026
2027         if (priv) {
2028                 /*
2029                  * The device may have been disabled.  Re-enable it.
2030                  */
2031                 err = pci_enable_device(dev);
2032                 if (err)
2033                         return err;
2034
2035                 pciserial_resume_ports(priv);
2036         }
2037         return 0;
2038 }
2039 #endif
2040
2041 static struct pci_device_id serial_pci_tbl[] = {
2042         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
2043                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2044                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
2045                 pbn_b1_8_1382400 },
2046         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
2047                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2048                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
2049                 pbn_b1_4_1382400 },
2050         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
2051                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2052                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
2053                 pbn_b1_2_1382400 },
2054         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2055                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2056                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
2057                 pbn_b1_8_1382400 },
2058         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2059                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2060                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
2061                 pbn_b1_4_1382400 },
2062         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2063                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2064                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
2065                 pbn_b1_2_1382400 },
2066         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2067                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2068                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
2069                 pbn_b1_8_921600 },
2070         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2071                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2072                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
2073                 pbn_b1_8_921600 },
2074         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2075                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2076                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
2077                 pbn_b1_4_921600 },
2078         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2079                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2080                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
2081                 pbn_b1_4_921600 },
2082         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2083                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2084                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
2085                 pbn_b1_2_921600 },
2086         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2087                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2088                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
2089                 pbn_b1_8_921600 },
2090         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2091                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2092                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
2093                 pbn_b1_8_921600 },
2094         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2095                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2096                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
2097                 pbn_b1_4_921600 },
2098         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2099                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2100                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0,
2101                 pbn_b1_2_1250000 },
2102         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
2103                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2104                 PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0,
2105                 pbn_b0_2_1843200 },
2106         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
2107                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2108                 PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0,
2109                 pbn_b0_4_1843200 },
2110         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
2111                 PCI_VENDOR_ID_AFAVLAB,
2112                 PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0,
2113                 pbn_b0_4_1152000 },
2114         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2115                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2116                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0,
2117                 pbn_b0_2_1843200_200 },
2118         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2119                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2120                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232, 0, 0,
2121                 pbn_b0_4_1843200_200 },
2122         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2123                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2124                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232, 0, 0,
2125                 pbn_b0_8_1843200_200 },
2126         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2127                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2128                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1, 0, 0,
2129                 pbn_b0_2_1843200_200 },
2130         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2131                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2132                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2, 0, 0,
2133                 pbn_b0_4_1843200_200 },
2134         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2135                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2136                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4, 0, 0,
2137                 pbn_b0_8_1843200_200 },
2138         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2139                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2140                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2, 0, 0,
2141                 pbn_b0_2_1843200_200 },
2142         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2143                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2144                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4, 0, 0,
2145                 pbn_b0_4_1843200_200 },
2146         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2147                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2148                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8, 0, 0,
2149                 pbn_b0_8_1843200_200 },
2150         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2151                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2152                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485, 0, 0,
2153                 pbn_b0_2_1843200_200 },
2154         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2155                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2156                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485, 0, 0,
2157                 pbn_b0_4_1843200_200 },
2158         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2159                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2160                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0,
2161                 pbn_b0_8_1843200_200 },
2162
2163         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
2164                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2165                 pbn_b2_bt_1_115200 },
2166         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
2167                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2168                 pbn_b2_bt_2_115200 },
2169         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
2170                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2171                 pbn_b2_bt_4_115200 },
2172         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
2173                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2174                 pbn_b2_bt_2_115200 },
2175         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
2176                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2177                 pbn_b2_bt_4_115200 },
2178         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
2179                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2180                 pbn_b2_8_115200 },
2181         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
2182                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2183                 pbn_b2_8_115200 },
2184
2185         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
2186                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2187                 pbn_b2_bt_2_115200 },
2188         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
2189                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2190                 pbn_b2_bt_2_921600 },
2191         /*
2192          * VScom SPCOM800, from sl@s.pl
2193          */
2194         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
2195                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2196                 pbn_b2_8_921600 },
2197         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
2198                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2199                 pbn_b2_4_921600 },
2200         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2201                 PCI_SUBVENDOR_ID_KEYSPAN,
2202                 PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
2203                 pbn_panacom },
2204         {       PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
2205                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2206                 pbn_panacom4 },
2207         {       PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
2208                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2209                 pbn_panacom2 },
2210         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
2211                 PCI_VENDOR_ID_ESDGMBH,
2212                 PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0,
2213                 pbn_b2_4_115200 },
2214         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2215                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
2216                 PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
2217                 pbn_b2_4_460800 },
2218         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2219                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
2220                 PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
2221                 pbn_b2_8_460800 },
2222         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2223                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
2224                 PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
2225                 pbn_b2_16_460800 },
2226         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2227                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
2228                 PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
2229                 pbn_b2_16_460800 },
2230         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2231                 PCI_SUBVENDOR_ID_CHASE_PCIRAS,
2232                 PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
2233                 pbn_b2_4_460800 },
2234         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2235                 PCI_SUBVENDOR_ID_CHASE_PCIRAS,
2236                 PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
2237                 pbn_b2_8_460800 },
2238         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2239                 PCI_SUBVENDOR_ID_EXSYS,
2240                 PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
2241                 pbn_exsys_4055 },
2242         /*
2243          * Megawolf Romulus PCI Serial Card, from Mike Hudson
2244          * (Exoray@isys.ca)
2245          */
2246         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
2247                 0x10b5, 0x106a, 0, 0,
2248                 pbn_plx_romulus },
2249         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
2250                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2251                 pbn_b1_4_115200 },
2252         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
2253                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2254                 pbn_b1_2_115200 },
2255         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
2256                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2257                 pbn_b1_8_115200 },
2258         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
2259                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2260                 pbn_b1_8_115200 },
2261         {       PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
2262                 PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4,
2263                 0, 0,
2264                 pbn_b0_4_921600 },
2265         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
2266                 PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
2267                 0, 0,
2268                 pbn_b0_4_1152000 },
2269
2270                 /*
2271                  * The below card is a little controversial since it is the
2272                  * subject of a PCI vendor/device ID clash.  (See
2273                  * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
2274                  * For now just used the hex ID 0x950a.
2275                  */
2276         {       PCI_VENDOR_ID_OXSEMI, 0x950a,
2277                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2278                 pbn_b0_2_1130000 },
2279         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
2280                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2281                 pbn_b0_4_115200 },
2282         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
2283                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2284                 pbn_b0_bt_2_921600 },
2285
2286         /*
2287          * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
2288          * from skokodyn@yahoo.com
2289          */
2290         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
2291                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0,
2292                 pbn_sbsxrsio },
2293         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
2294                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0,
2295                 pbn_sbsxrsio },
2296         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
2297                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0,
2298                 pbn_sbsxrsio },
2299         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
2300                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0,
2301                 pbn_sbsxrsio },
2302
2303         /*
2304          * Digitan DS560-558, from jimd@esoft.com
2305          */
2306         {       PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
2307                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2308                 pbn_b1_1_115200 },
2309
2310         /*
2311          * Titan Electronic cards
2312          *  The 400L and 800L have a custom setup quirk.
2313          */
2314         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
2315                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2316                 pbn_b0_1_921600 },
2317         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
2318                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2319                 pbn_b0_2_921600 },
2320         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
2321                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2322                 pbn_b0_4_921600 },
2323         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
2324                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2325                 pbn_b0_4_921600 },
2326         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
2327                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2328                 pbn_b1_1_921600 },
2329         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
2330                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2331                 pbn_b1_bt_2_921600 },
2332         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
2333                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2334                 pbn_b0_bt_4_921600 },
2335         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
2336                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2337                 pbn_b0_bt_8_921600 },
2338
2339         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
2340                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2341                 pbn_b2_1_460800 },
2342         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
2343                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2344                 pbn_b2_1_460800 },
2345         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
2346                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2347                 pbn_b2_1_460800 },
2348         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
2349                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2350                 pbn_b2_bt_2_921600 },
2351         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
2352                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2353                 pbn_b2_bt_2_921600 },
2354         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
2355                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2356                 pbn_b2_bt_2_921600 },
2357         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
2358                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2359                 pbn_b2_bt_4_921600 },
2360         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
2361                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2362                 pbn_b2_bt_4_921600 },
2363         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
2364                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2365                 pbn_b2_bt_4_921600 },
2366         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
2367                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2368                 pbn_b0_1_921600 },
2369         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
2370                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2371                 pbn_b0_1_921600 },
2372         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
2373                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2374                 pbn_b0_1_921600 },
2375         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
2376                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2377                 pbn_b0_bt_2_921600 },
2378         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
2379                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2380                 pbn_b0_bt_2_921600 },
2381         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
2382                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2383                 pbn_b0_bt_2_921600 },
2384         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
2385                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2386                 pbn_b0_bt_4_921600 },
2387         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
2388                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2389                 pbn_b0_bt_4_921600 },
2390         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
2391                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2392                 pbn_b0_bt_4_921600 },
2393         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550,
2394                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2395                 pbn_b0_bt_8_921600 },
2396         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650,
2397                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2398                 pbn_b0_bt_8_921600 },
2399         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850,
2400                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2401                 pbn_b0_bt_8_921600 },
2402
2403         /*
2404          * Computone devices submitted by Doug McNash dmcnash@computone.com
2405          */
2406         {       PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2407                 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
2408                 0, 0, pbn_computone_4 },
2409         {       PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2410                 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
2411                 0, 0, pbn_computone_8 },
2412         {       PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2413                 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
2414                 0, 0, pbn_computone_6 },
2415
2416         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
2417                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2418                 pbn_oxsemi },
2419         {       PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
2420                 PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
2421                 pbn_b0_bt_1_921600 },
2422
2423         /*
2424          * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
2425          */
2426         {       PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028,
2427                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2428                 pbn_b0_bt_8_115200 },
2429         {       PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030,
2430                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2431                 pbn_b0_bt_8_115200 },
2432
2433         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
2434                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2435                 pbn_b0_bt_2_115200 },
2436         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
2437                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2438                 pbn_b0_bt_2_115200 },
2439         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
2440                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2441                 pbn_b0_bt_2_115200 },
2442         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
2443                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2444                 pbn_b0_bt_4_460800 },
2445         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B,
2446                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2447                 pbn_b0_bt_4_460800 },
2448         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
2449                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2450                 pbn_b0_bt_2_460800 },
2451         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
2452                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2453                 pbn_b0_bt_2_460800 },
2454         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
2455                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2456                 pbn_b0_bt_2_460800 },
2457         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
2458                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2459                 pbn_b0_bt_1_115200 },
2460         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
2461                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2462                 pbn_b0_bt_1_460800 },
2463
2464         /*
2465          * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408).
2466          * Cards are identified by their subsystem vendor IDs, which
2467          * (in hex) match the model number.
2468          *
2469          * Note that JC140x are RS422/485 cards which require ox950
2470          * ACR = 0x10, and as such are not currently fully supported.
2471          */
2472         {       PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
2473                 0x1204, 0x0004, 0, 0,
2474                 pbn_b0_4_921600 },
2475         {       PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
2476                 0x1208, 0x0004, 0, 0,
2477                 pbn_b0_4_921600 },
2478 /*      {       PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
2479                 0x1402, 0x0002, 0, 0,
2480                 pbn_b0_2_921600 }, */
2481 /*      {       PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
2482                 0x1404, 0x0004, 0, 0,
2483                 pbn_b0_4_921600 }, */
2484         {       PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1,
2485                 0x1208, 0x0004, 0, 0,
2486                 pbn_b0_4_921600 },
2487
2488         /*
2489          * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
2490          */
2491         {       PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4,
2492                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2493                 pbn_b1_1_1382400 },
2494
2495         /*
2496          * Dell Remote Access Card III - Tim_T_Murphy@Dell.com
2497          */
2498         {       PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII,
2499                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2500                 pbn_b1_1_1382400 },
2501
2502         /*
2503          * RAStel 2 port modem, gerg@moreton.com.au
2504          */
2505         {       PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
2506                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2507                 pbn_b2_bt_2_115200 },
2508
2509         /*
2510          * EKF addition for i960 Boards form EKF with serial port
2511          */
2512         {       PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP,
2513                 0xE4BF, PCI_ANY_ID, 0, 0,
2514                 pbn_intel_i960 },
2515
2516         /*
2517          * Xircom Cardbus/Ethernet combos
2518          */
2519         {       PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
2520                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2521                 pbn_b0_1_115200 },
2522         /*
2523          * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry)
2524          */
2525         {       PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G,
2526                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2527                 pbn_b0_1_115200 },
2528
2529         /*
2530          * Untested PCI modems, sent in from various folks...
2531          */
2532
2533         /*
2534          * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de>
2535          */
2536         {       PCI_VENDOR_ID_ROCKWELL, 0x1004,
2537                 0x1048, 0x1500, 0, 0,
2538                 pbn_b1_1_115200 },
2539
2540         {       PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
2541                 0xFF00, 0, 0, 0,
2542                 pbn_sgi_ioc3 },
2543
2544         /*
2545          * HP Diva card
2546          */
2547         {       PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
2548                 PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0,
2549                 pbn_b1_1_115200 },
2550         {       PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
2551                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2552                 pbn_b0_5_115200 },
2553         {       PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
2554                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2555                 pbn_b2_1_115200 },
2556
2557         {       PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2,
2558                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2559                 pbn_b3_2_115200 },
2560         {       PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
2561                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2562                 pbn_b3_4_115200 },
2563         {       PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
2564                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2565                 pbn_b3_8_115200 },
2566
2567         /*
2568          * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
2569          */
2570         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2571                 PCI_ANY_ID, PCI_ANY_ID,
2572                 0,
2573                 0, pbn_exar_XR17C152 },
2574         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2575                 PCI_ANY_ID, PCI_ANY_ID,
2576                 0,
2577                 0, pbn_exar_XR17C154 },
2578         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2579                 PCI_ANY_ID, PCI_ANY_ID,
2580                 0,
2581                 0, pbn_exar_XR17C158 },
2582
2583         /*
2584          * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
2585          */
2586         {       PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
2587                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2588                 pbn_b0_1_115200 },
2589         /*
2590          * ITE
2591          */
2592         {       PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
2593                 PCI_ANY_ID, PCI_ANY_ID,
2594                 0, 0,
2595                 pbn_b1_bt_1_115200 },
2596
2597         /*
2598          * IntaShield IS-200
2599          */
2600         {       PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
2601                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,   /* 135a.0811 */
2602                 pbn_b2_2_115200 },
2603
2604         /*
2605          * Perle PCI-RAS cards
2606          */
2607         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
2608                 PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4,
2609                 0, 0, pbn_b2_4_921600 },
2610         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
2611                 PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8,
2612                 0, 0, pbn_b2_8_921600 },
2613
2614         /*
2615          * Mainpine series cards: Fairly standard layout but fools
2616          * parts of the autodetect in some cases and uses otherwise
2617          * unmatched communications subclasses in the PCI Express case
2618          */
2619
2620         {       /* RockForceDUO */
2621                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2622                 PCI_VENDOR_ID_MAINPINE, 0x0200,
2623                 0, 0, pbn_b0_2_115200 },
2624         {       /* RockForceQUATRO */
2625                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2626                 PCI_VENDOR_ID_MAINPINE, 0x0300,
2627                 0, 0, pbn_b0_4_115200 },
2628         {       /* RockForceDUO+ */
2629                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2630                 PCI_VENDOR_ID_MAINPINE, 0x0400,
2631                 0, 0, pbn_b0_2_115200 },
2632         {       /* RockForceQUATRO+ */
2633                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2634                 PCI_VENDOR_ID_MAINPINE, 0x0500,
2635                 0, 0, pbn_b0_4_115200 },
2636         {       /* RockForce+ */
2637                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2638                 PCI_VENDOR_ID_MAINPINE, 0x0600,
2639                 0, 0, pbn_b0_2_115200 },
2640         {       /* RockForce+ */
2641                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2642                 PCI_VENDOR_ID_MAINPINE, 0x0700,
2643                 0, 0, pbn_b0_4_115200 },
2644         {       /* RockForceOCTO+ */
2645                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2646                 PCI_VENDOR_ID_MAINPINE, 0x0800,
2647                 0, 0, pbn_b0_8_115200 },
2648         {       /* RockForceDUO+ */
2649                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2650                 PCI_VENDOR_ID_MAINPINE, 0x0C00,
2651                 0, 0, pbn_b0_2_115200 },
2652         {       /* RockForceQUARTRO+ */
2653                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2654                 PCI_VENDOR_ID_MAINPINE, 0x0D00,
2655                 0, 0, pbn_b0_4_115200 },
2656         {       /* RockForceOCTO+ */
2657                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2658                 PCI_VENDOR_ID_MAINPINE, 0x1D00,
2659                 0, 0, pbn_b0_8_115200 },
2660         {       /* RockForceD1 */
2661                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2662                 PCI_VENDOR_ID_MAINPINE, 0x2000,
2663                 0, 0, pbn_b0_1_115200 },
2664         {       /* RockForceF1 */
2665                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2666                 PCI_VENDOR_ID_MAINPINE, 0x2100,
2667                 0, 0, pbn_b0_1_115200 },
2668         {       /* RockForceD2 */
2669                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2670                 PCI_VENDOR_ID_MAINPINE, 0x2200,
2671                 0, 0, pbn_b0_2_115200 },
2672         {       /* RockForceF2 */
2673                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2674                 PCI_VENDOR_ID_MAINPINE, 0x2300,
2675                 0, 0, pbn_b0_2_115200 },
2676         {       /* RockForceD4 */
2677                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2678                 PCI_VENDOR_ID_MAINPINE, 0x2400,
2679                 0, 0, pbn_b0_4_115200 },
2680         {       /* RockForceF4 */
2681                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2682                 PCI_VENDOR_ID_MAINPINE, 0x2500,
2683                 0, 0, pbn_b0_4_115200 },
2684         {       /* RockForceD8 */
2685                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2686                 PCI_VENDOR_ID_MAINPINE, 0x2600,
2687                 0, 0, pbn_b0_8_115200 },
2688         {       /* RockForceF8 */
2689                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2690                 PCI_VENDOR_ID_MAINPINE, 0x2700,
2691                 0, 0, pbn_b0_8_115200 },
2692         {       /* IQ Express D1 */
2693                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2694                 PCI_VENDOR_ID_MAINPINE, 0x3000,
2695                 0, 0, pbn_b0_1_115200 },
2696         {       /* IQ Express F1 */
2697                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2698                 PCI_VENDOR_ID_MAINPINE, 0x3100,
2699                 0, 0, pbn_b0_1_115200 },
2700         {       /* IQ Express D2 */
2701                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2702                 PCI_VENDOR_ID_MAINPINE, 0x3200,
2703                 0, 0, pbn_b0_2_115200 },
2704         {       /* IQ Express F2 */
2705                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2706                 PCI_VENDOR_ID_MAINPINE, 0x3300,
2707                 0, 0, pbn_b0_2_115200 },
2708         {       /* IQ Express D4 */
2709                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2710                 PCI_VENDOR_ID_MAINPINE, 0x3400,
2711                 0, 0, pbn_b0_4_115200 },
2712         {       /* IQ Express F4 */
2713                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2714                 PCI_VENDOR_ID_MAINPINE, 0x3500,
2715                 0, 0, pbn_b0_4_115200 },
2716         {       /* IQ Express D8 */
2717                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2718                 PCI_VENDOR_ID_MAINPINE, 0x3C00,
2719                 0, 0, pbn_b0_8_115200 },
2720         {       /* IQ Express F8 */
2721                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2722                 PCI_VENDOR_ID_MAINPINE, 0x3D00,
2723                 0, 0, pbn_b0_8_115200 },
2724
2725
2726         /*
2727          * PA Semi PA6T-1682M on-chip UART
2728          */
2729         {       PCI_VENDOR_ID_PASEMI, 0xa004,
2730                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2731                 pbn_pasemi_1682M },
2732
2733         /*
2734         * ADDI-DATA GmbH communication cards <info@addi-data.com>
2735         */
2736         {       PCI_VENDOR_ID_ADDIDATA,
2737                 PCI_DEVICE_ID_ADDIDATA_APCI7500,
2738                 PCI_ANY_ID,
2739                 PCI_ANY_ID,
2740                 0,
2741                 0,
2742                 pbn_b0_4_115200 },
2743
2744         {       PCI_VENDOR_ID_ADDIDATA,
2745                 PCI_DEVICE_ID_ADDIDATA_APCI7420,
2746                 PCI_ANY_ID,
2747                 PCI_ANY_ID,
2748                 0,
2749                 0,
2750                 pbn_b0_2_115200 },
2751
2752         {       PCI_VENDOR_ID_ADDIDATA,
2753                 PCI_DEVICE_ID_ADDIDATA_APCI7300,
2754                 PCI_ANY_ID,
2755                 PCI_ANY_ID,
2756                 0,
2757                 0,
2758                 pbn_b0_1_115200 },
2759
2760         {       PCI_VENDOR_ID_ADDIDATA_OLD,
2761                 PCI_DEVICE_ID_ADDIDATA_APCI7800,
2762                 PCI_ANY_ID,
2763                 PCI_ANY_ID,
2764                 0,
2765                 0,
2766                 pbn_b1_8_115200 },
2767
2768         {       PCI_VENDOR_ID_ADDIDATA,
2769                 PCI_DEVICE_ID_ADDIDATA_APCI7500_2,
2770                 PCI_ANY_ID,
2771                 PCI_ANY_ID,
2772                 0,
2773                 0,
2774                 pbn_b0_4_115200 },
2775
2776         {       PCI_VENDOR_ID_ADDIDATA,
2777                 PCI_DEVICE_ID_ADDIDATA_APCI7420_2,
2778                 PCI_ANY_ID,
2779                 PCI_ANY_ID,
2780                 0,
2781                 0,
2782                 pbn_b0_2_115200 },
2783
2784         {       PCI_VENDOR_ID_ADDIDATA,
2785                 PCI_DEVICE_ID_ADDIDATA_APCI7300_2,
2786                 PCI_ANY_ID,
2787                 PCI_ANY_ID,
2788                 0,
2789                 0,
2790                 pbn_b0_1_115200 },
2791
2792         {       PCI_VENDOR_ID_ADDIDATA,
2793                 PCI_DEVICE_ID_ADDIDATA_APCI7500_3,
2794                 PCI_ANY_ID,
2795                 PCI_ANY_ID,
2796                 0,
2797                 0,
2798                 pbn_b0_4_115200 },
2799
2800         {       PCI_VENDOR_ID_ADDIDATA,
2801                 PCI_DEVICE_ID_ADDIDATA_APCI7420_3,
2802                 PCI_ANY_ID,
2803                 PCI_ANY_ID,
2804                 0,
2805                 0,
2806                 pbn_b0_2_115200 },
2807
2808         {       PCI_VENDOR_ID_ADDIDATA,
2809                 PCI_DEVICE_ID_ADDIDATA_APCI7300_3,
2810                 PCI_ANY_ID,
2811                 PCI_ANY_ID,
2812                 0,
2813                 0,
2814                 pbn_b0_1_115200 },
2815
2816         {       PCI_VENDOR_ID_ADDIDATA,
2817                 PCI_DEVICE_ID_ADDIDATA_APCI7800_3,
2818                 PCI_ANY_ID,
2819                 PCI_ANY_ID,
2820                 0,
2821                 0,
2822                 pbn_b0_8_115200 },
2823
2824         /*
2825          * These entries match devices with class COMMUNICATION_SERIAL,
2826          * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
2827          */
2828         {       PCI_ANY_ID, PCI_ANY_ID,
2829                 PCI_ANY_ID, PCI_ANY_ID,
2830                 PCI_CLASS_COMMUNICATION_SERIAL << 8,
2831                 0xffff00, pbn_default },
2832         {       PCI_ANY_ID, PCI_ANY_ID,
2833                 PCI_ANY_ID, PCI_ANY_ID,
2834                 PCI_CLASS_COMMUNICATION_MODEM << 8,
2835                 0xffff00, pbn_default },
2836         {       PCI_ANY_ID, PCI_ANY_ID,
2837                 PCI_ANY_ID, PCI_ANY_ID,
2838                 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8,
2839                 0xffff00, pbn_default },
2840         { 0, }
2841 };
2842
2843 static struct pci_driver serial_pci_driver = {
2844         .name           = "serial",
2845         .probe          = pciserial_init_one,
2846         .remove         = __devexit_p(pciserial_remove_one),
2847 #ifdef CONFIG_PM
2848         .suspend        = pciserial_suspend_one,
2849         .resume         = pciserial_resume_one,
2850 #endif
2851         .id_table       = serial_pci_tbl,
2852 };
2853
2854 static int __init serial8250_pci_init(void)
2855 {
2856         return pci_register_driver(&serial_pci_driver);
2857 }
2858
2859 static void __exit serial8250_pci_exit(void)
2860 {
2861         pci_unregister_driver(&serial_pci_driver);
2862 }
2863
2864 module_init(serial8250_pci_init);
2865 module_exit(serial8250_pci_exit);
2866
2867 MODULE_LICENSE("GPL");
2868 MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
2869 MODULE_DEVICE_TABLE(pci, serial_pci_tbl);