2 * pata_winbond.c - Winbond VLB ATA controllers
5 * Support for the Winbond 83759A when operating in advanced mode.
6 * Multichip mode is not currently supported.
9 #include <linux/kernel.h>
10 #include <linux/module.h>
11 #include <linux/init.h>
12 #include <linux/blkdev.h>
13 #include <linux/delay.h>
14 #include <scsi/scsi_host.h>
15 #include <linux/libata.h>
16 #include <linux/platform_device.h>
18 #define DRV_NAME "pata_winbond"
19 #define DRV_VERSION "0.0.3"
21 #define NR_HOST 4 /* Two winbond controllers, two channels each */
25 struct platform_device *platform_dev;
28 static struct ata_host *winbond_host[NR_HOST];
29 static struct winbond_data winbond_data[NR_HOST];
30 static int nr_winbond_host;
33 static int probe_winbond = 1;
35 static int probe_winbond;
38 static DEFINE_SPINLOCK(winbond_lock);
40 static void winbond_writecfg(unsigned long port, u8 reg, u8 val)
43 spin_lock_irqsave(&winbond_lock, flags);
44 outb(reg, port + 0x01);
45 outb(val, port + 0x02);
46 spin_unlock_irqrestore(&winbond_lock, flags);
49 static u8 winbond_readcfg(unsigned long port, u8 reg)
54 spin_lock_irqsave(&winbond_lock, flags);
55 outb(reg, port + 0x01);
56 val = inb(port + 0x02);
57 spin_unlock_irqrestore(&winbond_lock, flags);
62 static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
65 struct winbond_data *winbond = ap->host->private_data;
68 int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2);
70 reg = winbond_readcfg(winbond->config, 0x81);
72 /* Get the timing data in cycles */
73 if (reg & 0x40) /* Fast VLB bus, assume 50MHz */
74 ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
76 ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
78 active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
79 recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
80 timing = (active << 4) | recovery;
81 winbond_writecfg(winbond->config, timing, reg);
83 /* Load the setup timing */
86 if (adev->class != ATA_DEV_ATA)
87 reg |= 0x08; /* FIFO off */
88 if (!ata_pio_need_iordy(adev))
89 reg |= 0x02; /* IORDY off */
90 reg |= (clamp_val(t.setup, 0, 3) << 6);
91 winbond_writecfg(winbond->config, timing + 1, reg);
95 static unsigned int winbond_data_xfer(struct ata_device *dev,
96 unsigned char *buf, unsigned int buflen, int rw)
98 struct ata_port *ap = dev->link->ap;
99 int slop = buflen & 3;
101 if (ata_id_has_dword_io(dev->id)) {
103 ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
105 iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
107 if (unlikely(slop)) {
110 pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
111 memcpy(buf + buflen - slop, &pad, slop);
113 memcpy(&pad, buf + buflen - slop, slop);
114 iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
119 buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
124 static struct scsi_host_template winbond_sht = {
125 ATA_PIO_SHT(DRV_NAME),
128 static struct ata_port_operations winbond_port_ops = {
129 .inherits = &ata_sff_port_ops,
130 .sff_data_xfer = winbond_data_xfer,
131 .cable_detect = ata_cable_40wire,
132 .set_piomode = winbond_set_piomode,
136 * winbond_init_one - attach a winbond interface
137 * @type: Type to display
138 * @io: I/O port start
139 * @irq: interrupt line
140 * @fast: True if on a > 33Mhz VLB
142 * Register a VLB bus IDE interface. Such interfaces are PIO and we
143 * assume do not support IRQ sharing.
146 static __init int winbond_init_one(unsigned long port)
148 struct platform_device *pdev;
152 reg = winbond_readcfg(port, 0x81);
153 reg |= 0x80; /* jumpered mode off */
154 winbond_writecfg(port, 0x81, reg);
155 reg = winbond_readcfg(port, 0x83);
156 reg |= 0xF0; /* local control */
157 winbond_writecfg(port, 0x83, reg);
158 reg = winbond_readcfg(port, 0x85);
159 reg |= 0xF0; /* programmable timing */
160 winbond_writecfg(port, 0x85, reg);
162 reg = winbond_readcfg(port, 0x81);
164 if (!(reg & 0x03)) /* Disabled */
167 for (i = 0; i < 2 ; i ++) {
168 unsigned long cmd_port = 0x1F0 - (0x80 * i);
169 unsigned long ctl_port = cmd_port + 0x206;
170 struct ata_host *host;
172 void __iomem *cmd_addr, *ctl_addr;
174 if (!(reg & (1 << i)))
177 pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
179 return PTR_ERR(pdev);
182 host = ata_host_alloc(&pdev->dev, 1);
188 cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8);
189 ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1);
190 if (!cmd_addr || !ctl_addr)
193 ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port);
195 ap->ops = &winbond_port_ops;
197 ap->flags |= ATA_FLAG_SLAVE_POSS;
198 ap->ioaddr.cmd_addr = cmd_addr;
199 ap->ioaddr.altstatus_addr = ctl_addr;
200 ap->ioaddr.ctl_addr = ctl_addr;
201 ata_sff_std_ports(&ap->ioaddr);
203 /* hook in a private data structure per channel */
204 host->private_data = &winbond_data[nr_winbond_host];
205 winbond_data[nr_winbond_host].config = port;
206 winbond_data[nr_winbond_host].platform_dev = pdev;
209 rc = ata_host_activate(host, 14 + i, ata_sff_interrupt, 0,
214 winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev);
220 platform_device_unregister(pdev);
225 * winbond_init - attach winbond interfaces
227 * Attach winbond IDE interfaces by scanning the ports it may occupy.
230 static __init int winbond_init(void)
232 static const unsigned long config[2] = { 0x130, 0x1B0 };
237 if (probe_winbond == 0)
241 * Check both base addresses
244 for (i = 0; i < 2; i++) {
245 if (probe_winbond & (1<<i)) {
247 unsigned long port = config[i];
249 if (request_region(port, 2, "pata_winbond")) {
250 ret = winbond_init_one(port);
252 release_region(port, 2);
262 static __exit void winbond_exit(void)
266 for (i = 0; i < nr_winbond_host; i++) {
267 ata_host_detach(winbond_host[i]);
268 release_region(winbond_data[i].config, 2);
269 platform_device_unregister(winbond_data[i].platform_dev);
273 MODULE_AUTHOR("Alan Cox");
274 MODULE_DESCRIPTION("low-level driver for Winbond VL ATA");
275 MODULE_LICENSE("GPL");
276 MODULE_VERSION(DRV_VERSION);
278 module_init(winbond_init);
279 module_exit(winbond_exit);
281 module_param(probe_winbond, int, 0);