git.oblomov.eu Git - linux-2.6/blob - drivers/acpi/acpica/evregion.c

   1 /******************************************************************************
   2  *
   3  * Module Name: evregion - ACPI address_space (op_region) handler dispatch
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2008, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acevents.h"
  47 #include "acnamesp.h"
  48 #include "acinterp.h"
  49
  50 #define _COMPONENT          ACPI_EVENTS
  51 ACPI_MODULE_NAME("evregion")
  52
  53 /* Local prototypes */
  54 static acpi_status
  55 acpi_ev_reg_run(acpi_handle obj_handle,
  56                 u32 level, void *context, void **return_value);
  57
  58 static acpi_status
  59 acpi_ev_install_handler(acpi_handle obj_handle,
  60                         u32 level, void *context, void **return_value);
  61
  62 /* These are the address spaces that will get default handlers */
  63
  64 #define ACPI_NUM_DEFAULT_SPACES     4
  65
  66 static u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = {
  67         ACPI_ADR_SPACE_SYSTEM_MEMORY,
  68         ACPI_ADR_SPACE_SYSTEM_IO,
  69         ACPI_ADR_SPACE_PCI_CONFIG,
  70         ACPI_ADR_SPACE_DATA_TABLE
  71 };
  72
  73 /*******************************************************************************
  74  *
  75  * FUNCTION:    acpi_ev_install_region_handlers
  76  *
  77  * PARAMETERS:  None
  78  *
  79  * RETURN:      Status
  80  *
  81  * DESCRIPTION: Installs the core subsystem default address space handlers.
  82  *
  83  ******************************************************************************/
  84
  85 acpi_status acpi_ev_install_region_handlers(void)
  86 {
  87         acpi_status status;
  88         u32 i;
  89
  90         ACPI_FUNCTION_TRACE(ev_install_region_handlers);
  91
  92         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
  93         if (ACPI_FAILURE(status)) {
  94                 return_ACPI_STATUS(status);
  95         }
  96
  97         /*
  98          * All address spaces (PCI Config, EC, SMBus) are scope dependent and
  99          * registration must occur for a specific device.
 100          *
 101          * In the case of the system memory and IO address spaces there is
 102          * currently no device associated with the address space. For these we
 103          * use the root.
 104          *
 105          * We install the default PCI config space handler at the root so that
 106          * this space is immediately available even though the we have not
 107          * enumerated all the PCI Root Buses yet. This is to conform to the ACPI
 108          * specification which states that the PCI config space must be always
 109          * available -- even though we are nowhere near ready to find the PCI root
 110          * buses at this point.
 111          *
 112          * NOTE: We ignore AE_ALREADY_EXISTS because this means that a handler
 113          * has already been installed (via acpi_install_address_space_handler).
 114          * Similar for AE_SAME_HANDLER.
 115          */
 116         for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
 117                 status = acpi_ev_install_space_handler(acpi_gbl_root_node,
 118                                                        acpi_gbl_default_address_spaces
 119                                                        [i],
 120                                                        ACPI_DEFAULT_HANDLER,
 121                                                        NULL, NULL);
 122                 switch (status) {
 123                 case AE_OK:
 124                 case AE_SAME_HANDLER:
 125                 case AE_ALREADY_EXISTS:
 126
 127                         /* These exceptions are all OK */
 128
 129                         status = AE_OK;
 130                         break;
 131
 132                 default:
 133
 134                         goto unlock_and_exit;
 135                 }
 136         }
 137
 138       unlock_and_exit:
 139         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 140         return_ACPI_STATUS(status);
 141 }
 142
 143 /*******************************************************************************
 144  *
 145  * FUNCTION:    acpi_ev_initialize_op_regions
 146  *
 147  * PARAMETERS:  None
 148  *
 149  * RETURN:      Status
 150  *
 151  * DESCRIPTION: Execute _REG methods for all Operation Regions that have
 152  *              an installed default region handler.
 153  *
 154  ******************************************************************************/
 155
 156 acpi_status acpi_ev_initialize_op_regions(void)
 157 {
 158         acpi_status status;
 159         u32 i;
 160
 161         ACPI_FUNCTION_TRACE(ev_initialize_op_regions);
 162
 163         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 164         if (ACPI_FAILURE(status)) {
 165                 return_ACPI_STATUS(status);
 166         }
 167
 168         /* Run the _REG methods for op_regions in each default address space */
 169
 170         for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
 171                 /*
 172                  * TBD: Make sure handler is the DEFAULT handler, otherwise
 173                  * _REG will have already been run.
 174                  */
 175                 status = acpi_ev_execute_reg_methods(acpi_gbl_root_node,
 176                                                      acpi_gbl_default_address_spaces
 177                                                      [i]);
 178         }
 179
 180         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 181         return_ACPI_STATUS(status);
 182 }
 183
 184 /*******************************************************************************
 185  *
 186  * FUNCTION:    acpi_ev_execute_reg_method
 187  *
 188  * PARAMETERS:  region_obj          - Region object
 189  *              Function            - Passed to _REG: On (1) or Off (0)
 190  *
 191  * RETURN:      Status
 192  *
 193  * DESCRIPTION: Execute _REG method for a region
 194  *
 195  ******************************************************************************/
 196
 197 acpi_status
 198 acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function)
 199 {
 200         struct acpi_evaluate_info *info;
 201         union acpi_operand_object *args[3];
 202         union acpi_operand_object *region_obj2;
 203         acpi_status status;
 204
 205         ACPI_FUNCTION_TRACE(ev_execute_reg_method);
 206
 207         region_obj2 = acpi_ns_get_secondary_object(region_obj);
 208         if (!region_obj2) {
 209                 return_ACPI_STATUS(AE_NOT_EXIST);
 210         }
 211
 212         if (region_obj2->extra.method_REG == NULL) {
 213                 return_ACPI_STATUS(AE_OK);
 214         }
 215
 216         /* Allocate and initialize the evaluation information block */
 217
 218         info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
 219         if (!info) {
 220                 return_ACPI_STATUS(AE_NO_MEMORY);
 221         }
 222
 223         info->prefix_node = region_obj2->extra.method_REG;
 224         info->pathname = NULL;
 225         info->parameters = args;
 226         info->flags = ACPI_IGNORE_RETURN_VALUE;
 227
 228         /*
 229          * The _REG method has two arguments:
 230          *
 231          * Arg0 - Integer:
 232          *  Operation region space ID Same value as region_obj->Region.space_id
 233          *
 234          * Arg1 - Integer:
 235          *  connection status 1 for connecting the handler, 0 for disconnecting
 236          *  the handler (Passed as a parameter)
 237          */
 238         args[0] = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
 239         if (!args[0]) {
 240                 status = AE_NO_MEMORY;
 241                 goto cleanup1;
 242         }
 243
 244         args[1] = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
 245         if (!args[1]) {
 246                 status = AE_NO_MEMORY;
 247                 goto cleanup2;
 248         }
 249
 250         /* Setup the parameter objects */
 251
 252         args[0]->integer.value = region_obj->region.space_id;
 253         args[1]->integer.value = function;
 254         args[2] = NULL;
 255
 256         /* Execute the method, no return value */
 257
 258         ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
 259                         (ACPI_TYPE_METHOD, info->prefix_node, NULL));
 260
 261         status = acpi_ns_evaluate(info);
 262         acpi_ut_remove_reference(args[1]);
 263
 264       cleanup2:
 265         acpi_ut_remove_reference(args[0]);
 266
 267       cleanup1:
 268         ACPI_FREE(info);
 269         return_ACPI_STATUS(status);
 270 }
 271
 272 /*******************************************************************************
 273  *
 274  * FUNCTION:    acpi_ev_address_space_dispatch
 275  *
 276  * PARAMETERS:  region_obj          - Internal region object
 277  *              Function            - Read or Write operation
 278  *              region_offset       - Where in the region to read or write
 279  *              bit_width           - Field width in bits (8, 16, 32, or 64)
 280  *              Value               - Pointer to in or out value, must be
 281  *                                    full 64-bit acpi_integer
 282  *
 283  * RETURN:      Status
 284  *
 285  * DESCRIPTION: Dispatch an address space or operation region access to
 286  *              a previously installed handler.
 287  *
 288  ******************************************************************************/
 289
 290 acpi_status
 291 acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 292                                u32 function,
 293                                u32 region_offset,
 294                                u32 bit_width, acpi_integer * value)
 295 {
 296         acpi_status status;
 297         acpi_adr_space_handler handler;
 298         acpi_adr_space_setup region_setup;
 299         union acpi_operand_object *handler_desc;
 300         union acpi_operand_object *region_obj2;
 301         void *region_context = NULL;
 302
 303         ACPI_FUNCTION_TRACE(ev_address_space_dispatch);
 304
 305         region_obj2 = acpi_ns_get_secondary_object(region_obj);
 306         if (!region_obj2) {
 307                 return_ACPI_STATUS(AE_NOT_EXIST);
 308         }
 309
 310         /* Ensure that there is a handler associated with this region */
 311
 312         handler_desc = region_obj->region.handler;
 313         if (!handler_desc) {
 314                 ACPI_ERROR((AE_INFO,
 315                             "No handler for Region [%4.4s] (%p) [%s]",
 316                             acpi_ut_get_node_name(region_obj->region.node),
 317                             region_obj,
 318                             acpi_ut_get_region_name(region_obj->region.
 319                                                     space_id)));
 320
 321                 return_ACPI_STATUS(AE_NOT_EXIST);
 322         }
 323
 324         /*
 325          * It may be the case that the region has never been initialized.
 326          * Some types of regions require special init code
 327          */
 328         if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) {
 329
 330                 /* This region has not been initialized yet, do it */
 331
 332                 region_setup = handler_desc->address_space.setup;
 333                 if (!region_setup) {
 334
 335                         /* No initialization routine, exit with error */
 336
 337                         ACPI_ERROR((AE_INFO,
 338                                     "No init routine for region(%p) [%s]",
 339                                     region_obj,
 340                                     acpi_ut_get_region_name(region_obj->region.
 341                                                             space_id)));
 342                         return_ACPI_STATUS(AE_NOT_EXIST);
 343                 }
 344
 345                 /*
 346                  * We must exit the interpreter because the region setup will
 347                  * potentially execute control methods (for example, the _REG method
 348                  * for this region)
 349                  */
 350                 acpi_ex_exit_interpreter();
 351
 352                 status = region_setup(region_obj, ACPI_REGION_ACTIVATE,
 353                                       handler_desc->address_space.context,
 354                                       &region_context);
 355
 356                 /* Re-enter the interpreter */
 357
 358                 acpi_ex_enter_interpreter();
 359
 360                 /* Check for failure of the Region Setup */
 361
 362                 if (ACPI_FAILURE(status)) {
 363                         ACPI_EXCEPTION((AE_INFO, status,
 364                                         "During region initialization: [%s]",
 365                                         acpi_ut_get_region_name(region_obj->
 366                                                                 region.
 367                                                                 space_id)));
 368                         return_ACPI_STATUS(status);
 369                 }
 370
 371                 /* Region initialization may have been completed by region_setup */
 372
 373                 if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) {
 374                         region_obj->region.flags |= AOPOBJ_SETUP_COMPLETE;
 375
 376                         if (region_obj2->extra.region_context) {
 377
 378                                 /* The handler for this region was already installed */
 379
 380                                 ACPI_FREE(region_context);
 381                         } else {
 382                                 /*
 383                                  * Save the returned context for use in all accesses to
 384                                  * this particular region
 385                                  */
 386                                 region_obj2->extra.region_context =
 387                                     region_context;
 388                         }
 389                 }
 390         }
 391
 392         /* We have everything we need, we can invoke the address space handler */
 393
 394         handler = handler_desc->address_space.handler;
 395
 396         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 397                           "Handler %p (@%p) Address %8.8X%8.8X [%s]\n",
 398                           &region_obj->region.handler->address_space, handler,
 399                           ACPI_FORMAT_NATIVE_UINT(region_obj->region.address +
 400                                                   region_offset),
 401                           acpi_ut_get_region_name(region_obj->region.
 402                                                   space_id)));
 403
 404         if (!(handler_desc->address_space.handler_flags &
 405               ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) {
 406                 /*
 407                  * For handlers other than the default (supplied) handlers, we must
 408                  * exit the interpreter because the handler *might* block -- we don't
 409                  * know what it will do, so we can't hold the lock on the intepreter.
 410                  */
 411                 acpi_ex_exit_interpreter();
 412         }
 413
 414         /* Call the handler */
 415
 416         status = handler(function,
 417                          (region_obj->region.address + region_offset),
 418                          bit_width, value, handler_desc->address_space.context,
 419                          region_obj2->extra.region_context);
 420
 421         if (ACPI_FAILURE(status)) {
 422                 ACPI_EXCEPTION((AE_INFO, status, "Returned by Handler for [%s]",
 423                                 acpi_ut_get_region_name(region_obj->region.
 424                                                         space_id)));
 425         }
 426
 427         if (!(handler_desc->address_space.handler_flags &
 428               ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) {
 429                 /*
 430                  * We just returned from a non-default handler, we must re-enter the
 431                  * interpreter
 432                  */
 433                 acpi_ex_enter_interpreter();
 434         }
 435
 436         return_ACPI_STATUS(status);
 437 }
 438
 439 /*******************************************************************************
 440  *
 441  * FUNCTION:    acpi_ev_detach_region
 442  *
 443  * PARAMETERS:  region_obj          - Region Object
 444  *              acpi_ns_is_locked   - Namespace Region Already Locked?
 445  *
 446  * RETURN:      None
 447  *
 448  * DESCRIPTION: Break the association between the handler and the region
 449  *              this is a two way association.
 450  *
 451  ******************************************************************************/
 452
 453 void
 454 acpi_ev_detach_region(union acpi_operand_object *region_obj,
 455                       u8 acpi_ns_is_locked)
 456 {
 457         union acpi_operand_object *handler_obj;
 458         union acpi_operand_object *obj_desc;
 459         union acpi_operand_object **last_obj_ptr;
 460         acpi_adr_space_setup region_setup;
 461         void **region_context;
 462         union acpi_operand_object *region_obj2;
 463         acpi_status status;
 464
 465         ACPI_FUNCTION_TRACE(ev_detach_region);
 466
 467         region_obj2 = acpi_ns_get_secondary_object(region_obj);
 468         if (!region_obj2) {
 469                 return_VOID;
 470         }
 471         region_context = &region_obj2->extra.region_context;
 472
 473         /* Get the address handler from the region object */
 474
 475         handler_obj = region_obj->region.handler;
 476         if (!handler_obj) {
 477
 478                 /* This region has no handler, all done */
 479
 480                 return_VOID;
 481         }
 482
 483         /* Find this region in the handler's list */
 484
 485         obj_desc = handler_obj->address_space.region_list;
 486         last_obj_ptr = &handler_obj->address_space.region_list;
 487
 488         while (obj_desc) {
 489
 490                 /* Is this the correct Region? */
 491
 492                 if (obj_desc == region_obj) {
 493                         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 494                                           "Removing Region %p from address handler %p\n",
 495                                           region_obj, handler_obj));
 496
 497                         /* This is it, remove it from the handler's list */
 498
 499                         *last_obj_ptr = obj_desc->region.next;
 500                         obj_desc->region.next = NULL;   /* Must clear field */
 501
 502                         if (acpi_ns_is_locked) {
 503                                 status =
 504                                     acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 505                                 if (ACPI_FAILURE(status)) {
 506                                         return_VOID;
 507                                 }
 508                         }
 509
 510                         /* Now stop region accesses by executing the _REG method */
 511
 512                         status = acpi_ev_execute_reg_method(region_obj, 0);
 513                         if (ACPI_FAILURE(status)) {
 514                                 ACPI_EXCEPTION((AE_INFO, status,
 515                                                 "from region _REG, [%s]",
 516                                                 acpi_ut_get_region_name
 517                                                 (region_obj->region.space_id)));
 518                         }
 519
 520                         if (acpi_ns_is_locked) {
 521                                 status =
 522                                     acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 523                                 if (ACPI_FAILURE(status)) {
 524                                         return_VOID;
 525                                 }
 526                         }
 527
 528                         /*
 529                          * If the region has been activated, call the setup handler with
 530                          * the deactivate notification
 531                          */
 532                         if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) {
 533                                 region_setup = handler_obj->address_space.setup;
 534                                 status =
 535                                     region_setup(region_obj,
 536                                                  ACPI_REGION_DEACTIVATE,
 537                                                  handler_obj->address_space.
 538                                                  context, region_context);
 539
 540                                 /* Init routine may fail, Just ignore errors */
 541
 542                                 if (ACPI_FAILURE(status)) {
 543                                         ACPI_EXCEPTION((AE_INFO, status,
 544                                                         "from region handler - deactivate, [%s]",
 545                                                         acpi_ut_get_region_name
 546                                                         (region_obj->region.
 547                                                          space_id)));
 548                                 }
 549
 550                                 region_obj->region.flags &=
 551                                     ~(AOPOBJ_SETUP_COMPLETE);
 552                         }
 553
 554                         /*
 555                          * Remove handler reference in the region
 556                          *
 557                          * NOTE: this doesn't mean that the region goes away, the region
 558                          * is just inaccessible as indicated to the _REG method
 559                          *
 560                          * If the region is on the handler's list, this must be the
 561                          * region's handler
 562                          */
 563                         region_obj->region.handler = NULL;
 564                         acpi_ut_remove_reference(handler_obj);
 565
 566                         return_VOID;
 567                 }
 568
 569                 /* Walk the linked list of handlers */
 570
 571                 last_obj_ptr = &obj_desc->region.next;
 572                 obj_desc = obj_desc->region.next;
 573         }
 574
 575         /* If we get here, the region was not in the handler's region list */
 576
 577         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 578                           "Cannot remove region %p from address handler %p\n",
 579                           region_obj, handler_obj));
 580
 581         return_VOID;
 582 }
 583
 584 /*******************************************************************************
 585  *
 586  * FUNCTION:    acpi_ev_attach_region
 587  *
 588  * PARAMETERS:  handler_obj         - Handler Object
 589  *              region_obj          - Region Object
 590  *              acpi_ns_is_locked   - Namespace Region Already Locked?
 591  *
 592  * RETURN:      None
 593  *
 594  * DESCRIPTION: Create the association between the handler and the region
 595  *              this is a two way association.
 596  *
 597  ******************************************************************************/
 598
 599 acpi_status
 600 acpi_ev_attach_region(union acpi_operand_object *handler_obj,
 601                       union acpi_operand_object *region_obj,
 602                       u8 acpi_ns_is_locked)
 603 {
 604
 605         ACPI_FUNCTION_TRACE(ev_attach_region);
 606
 607         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 608                           "Adding Region [%4.4s] %p to address handler %p [%s]\n",
 609                           acpi_ut_get_node_name(region_obj->region.node),
 610                           region_obj, handler_obj,
 611                           acpi_ut_get_region_name(region_obj->region.
 612                                                   space_id)));
 613
 614         /* Link this region to the front of the handler's list */
 615
 616         region_obj->region.next = handler_obj->address_space.region_list;
 617         handler_obj->address_space.region_list = region_obj;
 618
 619         /* Install the region's handler */
 620
 621         if (region_obj->region.handler) {
 622                 return_ACPI_STATUS(AE_ALREADY_EXISTS);
 623         }
 624
 625         region_obj->region.handler = handler_obj;
 626         acpi_ut_add_reference(handler_obj);
 627
 628         return_ACPI_STATUS(AE_OK);
 629 }
 630
 631 /*******************************************************************************
 632  *
 633  * FUNCTION:    acpi_ev_install_handler
 634  *
 635  * PARAMETERS:  walk_namespace callback
 636  *
 637  * DESCRIPTION: This routine installs an address handler into objects that are
 638  *              of type Region or Device.
 639  *
 640  *              If the Object is a Device, and the device has a handler of
 641  *              the same type then the search is terminated in that branch.
 642  *
 643  *              This is because the existing handler is closer in proximity
 644  *              to any more regions than the one we are trying to install.
 645  *
 646  ******************************************************************************/
 647
 648 static acpi_status
 649 acpi_ev_install_handler(acpi_handle obj_handle,
 650                         u32 level, void *context, void **return_value)
 651 {
 652         union acpi_operand_object *handler_obj;
 653         union acpi_operand_object *next_handler_obj;
 654         union acpi_operand_object *obj_desc;
 655         struct acpi_namespace_node *node;
 656         acpi_status status;
 657
 658         ACPI_FUNCTION_NAME(ev_install_handler);
 659
 660         handler_obj = (union acpi_operand_object *)context;
 661
 662         /* Parameter validation */
 663
 664         if (!handler_obj) {
 665                 return (AE_OK);
 666         }
 667
 668         /* Convert and validate the device handle */
 669
 670         node = acpi_ns_map_handle_to_node(obj_handle);
 671         if (!node) {
 672                 return (AE_BAD_PARAMETER);
 673         }
 674
 675         /*
 676          * We only care about regions and objects that are allowed to have
 677          * address space handlers
 678          */
 679         if ((node->type != ACPI_TYPE_DEVICE) &&
 680             (node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
 681                 return (AE_OK);
 682         }
 683
 684         /* Check for an existing internal object */
 685
 686         obj_desc = acpi_ns_get_attached_object(node);
 687         if (!obj_desc) {
 688
 689                 /* No object, just exit */
 690
 691                 return (AE_OK);
 692         }
 693
 694         /* Devices are handled different than regions */
 695
 696         if (obj_desc->common.type == ACPI_TYPE_DEVICE) {
 697
 698                 /* Check if this Device already has a handler for this address space */
 699
 700                 next_handler_obj = obj_desc->device.handler;
 701                 while (next_handler_obj) {
 702
 703                         /* Found a handler, is it for the same address space? */
 704
 705                         if (next_handler_obj->address_space.space_id ==
 706                             handler_obj->address_space.space_id) {
 707                                 ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 708                                                   "Found handler for region [%s] in device %p(%p) "
 709                                                   "handler %p\n",
 710                                                   acpi_ut_get_region_name
 711                                                   (handler_obj->address_space.
 712                                                    space_id), obj_desc,
 713                                                   next_handler_obj,
 714                                                   handler_obj));
 715
 716                                 /*
 717                                  * Since the object we found it on was a device, then it
 718                                  * means that someone has already installed a handler for
 719                                  * the branch of the namespace from this device on. Just
 720                                  * bail out telling the walk routine to not traverse this
 721                                  * branch. This preserves the scoping rule for handlers.
 722                                  */
 723                                 return (AE_CTRL_DEPTH);
 724                         }
 725
 726                         /* Walk the linked list of handlers attached to this device */
 727
 728                         next_handler_obj = next_handler_obj->address_space.next;
 729                 }
 730
 731                 /*
 732                  * As long as the device didn't have a handler for this space we
 733                  * don't care about it. We just ignore it and proceed.
 734                  */
 735                 return (AE_OK);
 736         }
 737
 738         /* Object is a Region */
 739
 740         if (obj_desc->region.space_id != handler_obj->address_space.space_id) {
 741
 742                 /* This region is for a different address space, just ignore it */
 743
 744                 return (AE_OK);
 745         }
 746
 747         /*
 748          * Now we have a region and it is for the handler's address space type.
 749          *
 750          * First disconnect region for any previous handler (if any)
 751          */
 752         acpi_ev_detach_region(obj_desc, FALSE);
 753
 754         /* Connect the region to the new handler */
 755
 756         status = acpi_ev_attach_region(handler_obj, obj_desc, FALSE);
 757         return (status);
 758 }
 759
 760 /*******************************************************************************
 761  *
 762  * FUNCTION:    acpi_ev_install_space_handler
 763  *
 764  * PARAMETERS:  Node            - Namespace node for the device
 765  *              space_id        - The address space ID
 766  *              Handler         - Address of the handler
 767  *              Setup           - Address of the setup function
 768  *              Context         - Value passed to the handler on each access
 769  *
 770  * RETURN:      Status
 771  *
 772  * DESCRIPTION: Install a handler for all op_regions of a given space_id.
 773  *              Assumes namespace is locked
 774  *
 775  ******************************************************************************/
 776
 777 acpi_status
 778 acpi_ev_install_space_handler(struct acpi_namespace_node * node,
 779                               acpi_adr_space_type space_id,
 780                               acpi_adr_space_handler handler,
 781                               acpi_adr_space_setup setup, void *context)
 782 {
 783         union acpi_operand_object *obj_desc;
 784         union acpi_operand_object *handler_obj;
 785         acpi_status status;
 786         acpi_object_type type;
 787         u8 flags = 0;
 788
 789         ACPI_FUNCTION_TRACE(ev_install_space_handler);
 790
 791         /*
 792          * This registration is valid for only the types below and the root. This
 793          * is where the default handlers get placed.
 794          */
 795         if ((node->type != ACPI_TYPE_DEVICE) &&
 796             (node->type != ACPI_TYPE_PROCESSOR) &&
 797             (node->type != ACPI_TYPE_THERMAL) && (node != acpi_gbl_root_node)) {
 798                 status = AE_BAD_PARAMETER;
 799                 goto unlock_and_exit;
 800         }
 801
 802         if (handler == ACPI_DEFAULT_HANDLER) {
 803                 flags = ACPI_ADDR_HANDLER_DEFAULT_INSTALLED;
 804
 805                 switch (space_id) {
 806                 case ACPI_ADR_SPACE_SYSTEM_MEMORY:
 807                         handler = acpi_ex_system_memory_space_handler;
 808                         setup = acpi_ev_system_memory_region_setup;
 809                         break;
 810
 811                 case ACPI_ADR_SPACE_SYSTEM_IO:
 812                         handler = acpi_ex_system_io_space_handler;
 813                         setup = acpi_ev_io_space_region_setup;
 814                         break;
 815
 816                 case ACPI_ADR_SPACE_PCI_CONFIG:
 817                         handler = acpi_ex_pci_config_space_handler;
 818                         setup = acpi_ev_pci_config_region_setup;
 819                         break;
 820
 821                 case ACPI_ADR_SPACE_CMOS:
 822                         handler = acpi_ex_cmos_space_handler;
 823                         setup = acpi_ev_cmos_region_setup;
 824                         break;
 825
 826                 case ACPI_ADR_SPACE_PCI_BAR_TARGET:
 827                         handler = acpi_ex_pci_bar_space_handler;
 828                         setup = acpi_ev_pci_bar_region_setup;
 829                         break;
 830
 831                 case ACPI_ADR_SPACE_DATA_TABLE:
 832                         handler = acpi_ex_data_table_space_handler;
 833                         setup = NULL;
 834                         break;
 835
 836                 default:
 837                         status = AE_BAD_PARAMETER;
 838                         goto unlock_and_exit;
 839                 }
 840         }
 841
 842         /* If the caller hasn't specified a setup routine, use the default */
 843
 844         if (!setup) {
 845                 setup = acpi_ev_default_region_setup;
 846         }
 847
 848         /* Check for an existing internal object */
 849
 850         obj_desc = acpi_ns_get_attached_object(node);
 851         if (obj_desc) {
 852                 /*
 853                  * The attached device object already exists. Make sure the handler
 854                  * is not already installed.
 855                  */
 856                 handler_obj = obj_desc->device.handler;
 857
 858                 /* Walk the handler list for this device */
 859
 860                 while (handler_obj) {
 861
 862                         /* Same space_id indicates a handler already installed */
 863
 864                         if (handler_obj->address_space.space_id == space_id) {
 865                                 if (handler_obj->address_space.handler ==
 866                                     handler) {
 867                                         /*
 868                                          * It is (relatively) OK to attempt to install the SAME
 869                                          * handler twice. This can easily happen with the
 870                                          * PCI_Config space.
 871                                          */
 872                                         status = AE_SAME_HANDLER;
 873                                         goto unlock_and_exit;
 874                                 } else {
 875                                         /* A handler is already installed */
 876
 877                                         status = AE_ALREADY_EXISTS;
 878                                 }
 879                                 goto unlock_and_exit;
 880                         }
 881
 882                         /* Walk the linked list of handlers */
 883
 884                         handler_obj = handler_obj->address_space.next;
 885                 }
 886         } else {
 887                 ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 888                                   "Creating object on Device %p while installing handler\n",
 889                                   node));
 890
 891                 /* obj_desc does not exist, create one */
 892
 893                 if (node->type == ACPI_TYPE_ANY) {
 894                         type = ACPI_TYPE_DEVICE;
 895                 } else {
 896                         type = node->type;
 897                 }
 898
 899                 obj_desc = acpi_ut_create_internal_object(type);
 900                 if (!obj_desc) {
 901                         status = AE_NO_MEMORY;
 902                         goto unlock_and_exit;
 903                 }
 904
 905                 /* Init new descriptor */
 906
 907                 obj_desc->common.type = (u8) type;
 908
 909                 /* Attach the new object to the Node */
 910
 911                 status = acpi_ns_attach_object(node, obj_desc, type);
 912
 913                 /* Remove local reference to the object */
 914
 915                 acpi_ut_remove_reference(obj_desc);
 916
 917                 if (ACPI_FAILURE(status)) {
 918                         goto unlock_and_exit;
 919                 }
 920         }
 921
 922         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 923                           "Installing address handler for region %s(%X) on Device %4.4s %p(%p)\n",
 924                           acpi_ut_get_region_name(space_id), space_id,
 925                           acpi_ut_get_node_name(node), node, obj_desc));
 926
 927         /*
 928          * Install the handler
 929          *
 930          * At this point there is no existing handler. Just allocate the object
 931          * for the handler and link it into the list.
 932          */
 933         handler_obj =
 934             acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_ADDRESS_HANDLER);
 935         if (!handler_obj) {
 936                 status = AE_NO_MEMORY;
 937                 goto unlock_and_exit;
 938         }
 939
 940         /* Init handler obj */
 941
 942         handler_obj->address_space.space_id = (u8) space_id;
 943         handler_obj->address_space.handler_flags = flags;
 944         handler_obj->address_space.region_list = NULL;
 945         handler_obj->address_space.node = node;
 946         handler_obj->address_space.handler = handler;
 947         handler_obj->address_space.context = context;
 948         handler_obj->address_space.setup = setup;
 949
 950         /* Install at head of Device.address_space list */
 951
 952         handler_obj->address_space.next = obj_desc->device.handler;
 953
 954         /*
 955          * The Device object is the first reference on the handler_obj.
 956          * Each region that uses the handler adds a reference.
 957          */
 958         obj_desc->device.handler = handler_obj;
 959
 960         /*
 961          * Walk the namespace finding all of the regions this
 962          * handler will manage.
 963          *
 964          * Start at the device and search the branch toward
 965          * the leaf nodes until either the leaf is encountered or
 966          * a device is detected that has an address handler of the
 967          * same type.
 968          *
 969          * In either case, back up and search down the remainder
 970          * of the branch
 971          */
 972         status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX,
 973                                         ACPI_NS_WALK_UNLOCK,
 974                                         acpi_ev_install_handler, handler_obj,
 975                                         NULL);
 976
 977       unlock_and_exit:
 978         return_ACPI_STATUS(status);
 979 }
 980
 981 /*******************************************************************************
 982  *
 983  * FUNCTION:    acpi_ev_execute_reg_methods
 984  *
 985  * PARAMETERS:  Node            - Namespace node for the device
 986  *              space_id        - The address space ID
 987  *
 988  * RETURN:      Status
 989  *
 990  * DESCRIPTION: Run all _REG methods for the input Space ID;
 991  *              Note: assumes namespace is locked, or system init time.
 992  *
 993  ******************************************************************************/
 994
 995 acpi_status
 996 acpi_ev_execute_reg_methods(struct acpi_namespace_node *node,
 997                             acpi_adr_space_type space_id)
 998 {
 999         acpi_status status;
1000
1001         ACPI_FUNCTION_TRACE(ev_execute_reg_methods);
1002
1003         /*
1004          * Run all _REG methods for all Operation Regions for this space ID. This
1005          * is a separate walk in order to handle any interdependencies between
1006          * regions and _REG methods. (i.e. handlers must be installed for all
1007          * regions of this Space ID before we can run any _REG methods)
1008          */
1009         status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX,
1010                                         ACPI_NS_WALK_UNLOCK, acpi_ev_reg_run,
1011                                         &space_id, NULL);
1012
1013         return_ACPI_STATUS(status);
1014 }
1015
1016 /*******************************************************************************
1017  *
1018  * FUNCTION:    acpi_ev_reg_run
1019  *
1020  * PARAMETERS:  walk_namespace callback
1021  *
1022  * DESCRIPTION: Run _REG method for region objects of the requested space_iD
1023  *
1024  ******************************************************************************/
1025
1026 static acpi_status
1027 acpi_ev_reg_run(acpi_handle obj_handle,
1028                 u32 level, void *context, void **return_value)
1029 {
1030         union acpi_operand_object *obj_desc;
1031         struct acpi_namespace_node *node;
1032         acpi_adr_space_type space_id;
1033         acpi_status status;
1034
1035         space_id = *ACPI_CAST_PTR(acpi_adr_space_type, context);
1036
1037         /* Convert and validate the device handle */
1038
1039         node = acpi_ns_map_handle_to_node(obj_handle);
1040         if (!node) {
1041                 return (AE_BAD_PARAMETER);
1042         }
1043
1044         /*
1045          * We only care about regions.and objects that are allowed to have address
1046          * space handlers
1047          */
1048         if ((node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
1049                 return (AE_OK);
1050         }
1051
1052         /* Check for an existing internal object */
1053
1054         obj_desc = acpi_ns_get_attached_object(node);
1055         if (!obj_desc) {
1056
1057                 /* No object, just exit */
1058
1059                 return (AE_OK);
1060         }
1061
1062         /* Object is a Region */
1063
1064         if (obj_desc->region.space_id != space_id) {
1065
1066                 /* This region is for a different address space, just ignore it */
1067
1068                 return (AE_OK);
1069         }
1070
1071         status = acpi_ev_execute_reg_method(obj_desc, 1);
1072         return (status);
1073 }