2 * Copyright (c) 2008-2009 Atheros Communications Inc.
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17 #include <linux/nl80211.h>
20 #define ATH_PCI_VERSION "0.1"
22 static char *dev_info = "ath9k";
24 MODULE_AUTHOR("Atheros Communications");
25 MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
26 MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
27 MODULE_LICENSE("Dual BSD/GPL");
29 static int modparam_nohwcrypt;
30 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
31 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
33 /* We use the hw_value as an index into our private channel structure */
35 #define CHAN2G(_freq, _idx) { \
36 .center_freq = (_freq), \
41 #define CHAN5G(_freq, _idx) { \
42 .band = IEEE80211_BAND_5GHZ, \
43 .center_freq = (_freq), \
48 /* Some 2 GHz radios are actually tunable on 2312-2732
49 * on 5 MHz steps, we support the channels which we know
50 * we have calibration data for all cards though to make
52 static struct ieee80211_channel ath9k_2ghz_chantable[] = {
53 CHAN2G(2412, 0), /* Channel 1 */
54 CHAN2G(2417, 1), /* Channel 2 */
55 CHAN2G(2422, 2), /* Channel 3 */
56 CHAN2G(2427, 3), /* Channel 4 */
57 CHAN2G(2432, 4), /* Channel 5 */
58 CHAN2G(2437, 5), /* Channel 6 */
59 CHAN2G(2442, 6), /* Channel 7 */
60 CHAN2G(2447, 7), /* Channel 8 */
61 CHAN2G(2452, 8), /* Channel 9 */
62 CHAN2G(2457, 9), /* Channel 10 */
63 CHAN2G(2462, 10), /* Channel 11 */
64 CHAN2G(2467, 11), /* Channel 12 */
65 CHAN2G(2472, 12), /* Channel 13 */
66 CHAN2G(2484, 13), /* Channel 14 */
69 /* Some 5 GHz radios are actually tunable on XXXX-YYYY
70 * on 5 MHz steps, we support the channels which we know
71 * we have calibration data for all cards though to make
73 static struct ieee80211_channel ath9k_5ghz_chantable[] = {
74 /* _We_ call this UNII 1 */
75 CHAN5G(5180, 14), /* Channel 36 */
76 CHAN5G(5200, 15), /* Channel 40 */
77 CHAN5G(5220, 16), /* Channel 44 */
78 CHAN5G(5240, 17), /* Channel 48 */
79 /* _We_ call this UNII 2 */
80 CHAN5G(5260, 18), /* Channel 52 */
81 CHAN5G(5280, 19), /* Channel 56 */
82 CHAN5G(5300, 20), /* Channel 60 */
83 CHAN5G(5320, 21), /* Channel 64 */
84 /* _We_ call this "Middle band" */
85 CHAN5G(5500, 22), /* Channel 100 */
86 CHAN5G(5520, 23), /* Channel 104 */
87 CHAN5G(5540, 24), /* Channel 108 */
88 CHAN5G(5560, 25), /* Channel 112 */
89 CHAN5G(5580, 26), /* Channel 116 */
90 CHAN5G(5600, 27), /* Channel 120 */
91 CHAN5G(5620, 28), /* Channel 124 */
92 CHAN5G(5640, 29), /* Channel 128 */
93 CHAN5G(5660, 30), /* Channel 132 */
94 CHAN5G(5680, 31), /* Channel 136 */
95 CHAN5G(5700, 32), /* Channel 140 */
96 /* _We_ call this UNII 3 */
97 CHAN5G(5745, 33), /* Channel 149 */
98 CHAN5G(5765, 34), /* Channel 153 */
99 CHAN5G(5785, 35), /* Channel 157 */
100 CHAN5G(5805, 36), /* Channel 161 */
101 CHAN5G(5825, 37), /* Channel 165 */
104 static void ath_cache_conf_rate(struct ath_softc *sc,
105 struct ieee80211_conf *conf)
107 switch (conf->channel->band) {
108 case IEEE80211_BAND_2GHZ:
109 if (conf_is_ht20(conf))
111 sc->hw_rate_table[ATH9K_MODE_11NG_HT20];
112 else if (conf_is_ht40_minus(conf))
114 sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS];
115 else if (conf_is_ht40_plus(conf))
117 sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS];
120 sc->hw_rate_table[ATH9K_MODE_11G];
122 case IEEE80211_BAND_5GHZ:
123 if (conf_is_ht20(conf))
125 sc->hw_rate_table[ATH9K_MODE_11NA_HT20];
126 else if (conf_is_ht40_minus(conf))
128 sc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS];
129 else if (conf_is_ht40_plus(conf))
131 sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS];
134 sc->hw_rate_table[ATH9K_MODE_11A];
142 static void ath_update_txpow(struct ath_softc *sc)
144 struct ath_hw *ah = sc->sc_ah;
147 if (sc->curtxpow != sc->config.txpowlimit) {
148 ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit);
149 /* read back in case value is clamped */
150 ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow);
151 sc->curtxpow = txpow;
155 static u8 parse_mpdudensity(u8 mpdudensity)
158 * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
159 * 0 for no restriction
168 switch (mpdudensity) {
174 /* Our lower layer calculations limit our precision to
190 static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
192 const struct ath_rate_table *rate_table = NULL;
193 struct ieee80211_supported_band *sband;
194 struct ieee80211_rate *rate;
198 case IEEE80211_BAND_2GHZ:
199 rate_table = sc->hw_rate_table[ATH9K_MODE_11G];
201 case IEEE80211_BAND_5GHZ:
202 rate_table = sc->hw_rate_table[ATH9K_MODE_11A];
208 if (rate_table == NULL)
211 sband = &sc->sbands[band];
212 rate = sc->rates[band];
214 if (rate_table->rate_cnt > ATH_RATE_MAX)
215 maxrates = ATH_RATE_MAX;
217 maxrates = rate_table->rate_cnt;
219 for (i = 0; i < maxrates; i++) {
220 rate[i].bitrate = rate_table->info[i].ratekbps / 100;
221 rate[i].hw_value = rate_table->info[i].ratecode;
222 if (rate_table->info[i].short_preamble) {
223 rate[i].hw_value_short = rate_table->info[i].ratecode |
224 rate_table->info[i].short_preamble;
225 rate[i].flags = IEEE80211_RATE_SHORT_PREAMBLE;
229 DPRINTF(sc, ATH_DBG_CONFIG, "Rate: %2dMbps, ratecode: %2d\n",
230 rate[i].bitrate / 10, rate[i].hw_value);
235 * Set/change channels. If the channel is really being changed, it's done
236 * by reseting the chip. To accomplish this we must first cleanup any pending
237 * DMA, then restart stuff.
239 int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
240 struct ath9k_channel *hchan)
242 struct ath_hw *ah = sc->sc_ah;
243 bool fastcc = true, stopped;
244 struct ieee80211_channel *channel = hw->conf.channel;
247 if (sc->sc_flags & SC_OP_INVALID)
253 * This is only performed if the channel settings have
256 * To switch channels clear any pending DMA operations;
257 * wait long enough for the RX fifo to drain, reset the
258 * hardware at the new frequency, and then re-enable
259 * the relevant bits of the h/w.
261 ath9k_hw_set_interrupts(ah, 0);
262 ath_drain_all_txq(sc, false);
263 stopped = ath_stoprecv(sc);
265 /* XXX: do not flush receive queue here. We don't want
266 * to flush data frames already in queue because of
267 * changing channel. */
269 if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET))
272 DPRINTF(sc, ATH_DBG_CONFIG,
273 "(%u MHz) -> (%u MHz), chanwidth: %d\n",
274 sc->sc_ah->curchan->channel,
275 channel->center_freq, sc->tx_chan_width);
277 spin_lock_bh(&sc->sc_resetlock);
279 r = ath9k_hw_reset(ah, hchan, fastcc);
281 DPRINTF(sc, ATH_DBG_FATAL,
282 "Unable to reset channel (%u Mhz) "
284 channel->center_freq, r);
285 spin_unlock_bh(&sc->sc_resetlock);
288 spin_unlock_bh(&sc->sc_resetlock);
290 sc->sc_flags &= ~SC_OP_FULL_RESET;
292 if (ath_startrecv(sc) != 0) {
293 DPRINTF(sc, ATH_DBG_FATAL,
294 "Unable to restart recv logic\n");
298 ath_cache_conf_rate(sc, &hw->conf);
299 ath_update_txpow(sc);
300 ath9k_hw_set_interrupts(ah, sc->imask);
301 ath9k_ps_restore(sc);
306 * This routine performs the periodic noise floor calibration function
307 * that is used to adjust and optimize the chip performance. This
308 * takes environmental changes (location, temperature) into account.
309 * When the task is complete, it reschedules itself depending on the
310 * appropriate interval that was calculated.
312 static void ath_ani_calibrate(unsigned long data)
314 struct ath_softc *sc = (struct ath_softc *)data;
315 struct ath_hw *ah = sc->sc_ah;
316 bool longcal = false;
317 bool shortcal = false;
318 bool aniflag = false;
319 unsigned int timestamp = jiffies_to_msecs(jiffies);
320 u32 cal_interval, short_cal_interval;
322 short_cal_interval = (ah->opmode == NL80211_IFTYPE_AP) ?
323 ATH_AP_SHORT_CALINTERVAL : ATH_STA_SHORT_CALINTERVAL;
326 * don't calibrate when we're scanning.
327 * we are most likely not on our home channel.
329 if (sc->sc_flags & SC_OP_SCANNING)
332 /* Only calibrate if awake */
333 if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE)
338 /* Long calibration runs independently of short calibration. */
339 if ((timestamp - sc->ani.longcal_timer) >= ATH_LONG_CALINTERVAL) {
341 DPRINTF(sc, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
342 sc->ani.longcal_timer = timestamp;
345 /* Short calibration applies only while caldone is false */
346 if (!sc->ani.caldone) {
347 if ((timestamp - sc->ani.shortcal_timer) >= short_cal_interval) {
349 DPRINTF(sc, ATH_DBG_ANI, "shortcal @%lu\n", jiffies);
350 sc->ani.shortcal_timer = timestamp;
351 sc->ani.resetcal_timer = timestamp;
354 if ((timestamp - sc->ani.resetcal_timer) >=
355 ATH_RESTART_CALINTERVAL) {
356 sc->ani.caldone = ath9k_hw_reset_calvalid(ah);
358 sc->ani.resetcal_timer = timestamp;
362 /* Verify whether we must check ANI */
363 if ((timestamp - sc->ani.checkani_timer) >= ATH_ANI_POLLINTERVAL) {
365 sc->ani.checkani_timer = timestamp;
368 /* Skip all processing if there's nothing to do. */
369 if (longcal || shortcal || aniflag) {
370 /* Call ANI routine if necessary */
372 ath9k_hw_ani_monitor(ah, &sc->nodestats, ah->curchan);
374 /* Perform calibration if necessary */
375 if (longcal || shortcal) {
376 sc->ani.caldone = ath9k_hw_calibrate(ah, ah->curchan,
377 sc->rx_chainmask, longcal);
380 sc->ani.noise_floor = ath9k_hw_getchan_noise(ah,
383 DPRINTF(sc, ATH_DBG_ANI," calibrate chan %u/%x nf: %d\n",
384 ah->curchan->channel, ah->curchan->channelFlags,
385 sc->ani.noise_floor);
389 ath9k_ps_restore(sc);
393 * Set timer interval based on previous results.
394 * The interval must be the shortest necessary to satisfy ANI,
395 * short calibration and long calibration.
397 cal_interval = ATH_LONG_CALINTERVAL;
398 if (sc->sc_ah->config.enable_ani)
399 cal_interval = min(cal_interval, (u32)ATH_ANI_POLLINTERVAL);
400 if (!sc->ani.caldone)
401 cal_interval = min(cal_interval, (u32)short_cal_interval);
403 mod_timer(&sc->ani.timer, jiffies + msecs_to_jiffies(cal_interval));
406 static void ath_start_ani(struct ath_softc *sc)
408 unsigned long timestamp = jiffies_to_msecs(jiffies);
410 sc->ani.longcal_timer = timestamp;
411 sc->ani.shortcal_timer = timestamp;
412 sc->ani.checkani_timer = timestamp;
414 mod_timer(&sc->ani.timer,
415 jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
419 * Update tx/rx chainmask. For legacy association,
420 * hard code chainmask to 1x1, for 11n association, use
421 * the chainmask configuration, for bt coexistence, use
422 * the chainmask configuration even in legacy mode.
424 void ath_update_chainmask(struct ath_softc *sc, int is_ht)
427 (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX)) {
428 sc->tx_chainmask = sc->sc_ah->caps.tx_chainmask;
429 sc->rx_chainmask = sc->sc_ah->caps.rx_chainmask;
431 sc->tx_chainmask = 1;
432 sc->rx_chainmask = 1;
435 DPRINTF(sc, ATH_DBG_CONFIG, "tx chmask: %d, rx chmask: %d\n",
436 sc->tx_chainmask, sc->rx_chainmask);
439 static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
443 an = (struct ath_node *)sta->drv_priv;
445 if (sc->sc_flags & SC_OP_TXAGGR) {
446 ath_tx_node_init(sc, an);
447 an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
448 sta->ht_cap.ampdu_factor);
449 an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
453 static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
455 struct ath_node *an = (struct ath_node *)sta->drv_priv;
457 if (sc->sc_flags & SC_OP_TXAGGR)
458 ath_tx_node_cleanup(sc, an);
461 static void ath9k_tasklet(unsigned long data)
463 struct ath_softc *sc = (struct ath_softc *)data;
464 u32 status = sc->intrstatus;
468 if (status & ATH9K_INT_FATAL) {
469 ath_reset(sc, false);
470 ath9k_ps_restore(sc);
474 if (status & (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) {
475 spin_lock_bh(&sc->rx.rxflushlock);
476 ath_rx_tasklet(sc, 0);
477 spin_unlock_bh(&sc->rx.rxflushlock);
480 if (status & ATH9K_INT_TX)
483 if ((status & ATH9K_INT_TSFOOR) &&
484 (sc->hw->conf.flags & IEEE80211_CONF_PS)) {
486 * TSF sync does not look correct; remain awake to sync with
489 DPRINTF(sc, ATH_DBG_PS, "TSFOOR - Sync with next Beacon\n");
490 sc->sc_flags |= SC_OP_WAIT_FOR_BEACON | SC_OP_BEACON_SYNC;
493 /* re-enable hardware interrupt */
494 ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
495 ath9k_ps_restore(sc);
498 irqreturn_t ath_isr(int irq, void *dev)
500 #define SCHED_INTR ( \
510 struct ath_softc *sc = dev;
511 struct ath_hw *ah = sc->sc_ah;
512 enum ath9k_int status;
516 * The hardware is not ready/present, don't
517 * touch anything. Note this can happen early
518 * on if the IRQ is shared.
520 if (sc->sc_flags & SC_OP_INVALID)
524 /* shared irq, not for us */
526 if (!ath9k_hw_intrpend(ah))
530 * Figure out the reason(s) for the interrupt. Note
531 * that the hal returns a pseudo-ISR that may include
532 * bits we haven't explicitly enabled so we mask the
533 * value to insure we only process bits we requested.
535 ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */
536 status &= sc->imask; /* discard unasked-for bits */
539 * If there are no status bits set, then this interrupt was not
540 * for me (should have been caught above).
545 /* Cache the status */
546 sc->intrstatus = status;
548 if (status & SCHED_INTR)
552 * If a FATAL or RXORN interrupt is received, we have to reset the
555 if (status & (ATH9K_INT_FATAL | ATH9K_INT_RXORN))
558 if (status & ATH9K_INT_SWBA)
559 tasklet_schedule(&sc->bcon_tasklet);
561 if (status & ATH9K_INT_TXURN)
562 ath9k_hw_updatetxtriglevel(ah, true);
564 if (status & ATH9K_INT_MIB) {
566 * Disable interrupts until we service the MIB
567 * interrupt; otherwise it will continue to
570 ath9k_hw_set_interrupts(ah, 0);
572 * Let the hal handle the event. We assume
573 * it will clear whatever condition caused
576 ath9k_hw_procmibevent(ah, &sc->nodestats);
577 ath9k_hw_set_interrupts(ah, sc->imask);
580 if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
581 if (status & ATH9K_INT_TIM_TIMER) {
582 /* Clear RxAbort bit so that we can
584 ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
585 ath9k_hw_setrxabort(sc->sc_ah, 0);
586 sc->sc_flags |= SC_OP_WAIT_FOR_BEACON;
591 ath_debug_stat_interrupt(sc, status);
594 /* turn off every interrupt except SWBA */
595 ath9k_hw_set_interrupts(ah, (sc->imask & ATH9K_INT_SWBA));
596 tasklet_schedule(&sc->intr_tq);
604 static u32 ath_get_extchanmode(struct ath_softc *sc,
605 struct ieee80211_channel *chan,
606 enum nl80211_channel_type channel_type)
610 switch (chan->band) {
611 case IEEE80211_BAND_2GHZ:
612 switch(channel_type) {
613 case NL80211_CHAN_NO_HT:
614 case NL80211_CHAN_HT20:
615 chanmode = CHANNEL_G_HT20;
617 case NL80211_CHAN_HT40PLUS:
618 chanmode = CHANNEL_G_HT40PLUS;
620 case NL80211_CHAN_HT40MINUS:
621 chanmode = CHANNEL_G_HT40MINUS;
625 case IEEE80211_BAND_5GHZ:
626 switch(channel_type) {
627 case NL80211_CHAN_NO_HT:
628 case NL80211_CHAN_HT20:
629 chanmode = CHANNEL_A_HT20;
631 case NL80211_CHAN_HT40PLUS:
632 chanmode = CHANNEL_A_HT40PLUS;
634 case NL80211_CHAN_HT40MINUS:
635 chanmode = CHANNEL_A_HT40MINUS;
646 static int ath_setkey_tkip(struct ath_softc *sc, u16 keyix, const u8 *key,
647 struct ath9k_keyval *hk, const u8 *addr,
653 key_txmic = key + NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY;
654 key_rxmic = key + NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY;
658 * Group key installation - only two key cache entries are used
659 * regardless of splitmic capability since group key is only
660 * used either for TX or RX.
663 memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
664 memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_mic));
666 memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
667 memcpy(hk->kv_txmic, key_rxmic, sizeof(hk->kv_mic));
669 return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, addr);
672 /* TX and RX keys share the same key cache entry. */
673 memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
674 memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_txmic));
675 return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, addr);
678 /* Separate key cache entries for TX and RX */
680 /* TX key goes at first index, RX key at +32. */
681 memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
682 if (!ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, NULL)) {
683 /* TX MIC entry failed. No need to proceed further */
684 DPRINTF(sc, ATH_DBG_FATAL,
685 "Setting TX MIC Key Failed\n");
689 memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
690 /* XXX delete tx key on failure? */
691 return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix + 32, hk, addr);
694 static int ath_reserve_key_cache_slot_tkip(struct ath_softc *sc)
698 for (i = IEEE80211_WEP_NKID; i < sc->keymax / 2; i++) {
699 if (test_bit(i, sc->keymap) ||
700 test_bit(i + 64, sc->keymap))
701 continue; /* At least one part of TKIP key allocated */
703 (test_bit(i + 32, sc->keymap) ||
704 test_bit(i + 64 + 32, sc->keymap)))
705 continue; /* At least one part of TKIP key allocated */
707 /* Found a free slot for a TKIP key */
713 static int ath_reserve_key_cache_slot(struct ath_softc *sc)
717 /* First, try to find slots that would not be available for TKIP. */
719 for (i = IEEE80211_WEP_NKID; i < sc->keymax / 4; i++) {
720 if (!test_bit(i, sc->keymap) &&
721 (test_bit(i + 32, sc->keymap) ||
722 test_bit(i + 64, sc->keymap) ||
723 test_bit(i + 64 + 32, sc->keymap)))
725 if (!test_bit(i + 32, sc->keymap) &&
726 (test_bit(i, sc->keymap) ||
727 test_bit(i + 64, sc->keymap) ||
728 test_bit(i + 64 + 32, sc->keymap)))
730 if (!test_bit(i + 64, sc->keymap) &&
731 (test_bit(i , sc->keymap) ||
732 test_bit(i + 32, sc->keymap) ||
733 test_bit(i + 64 + 32, sc->keymap)))
735 if (!test_bit(i + 64 + 32, sc->keymap) &&
736 (test_bit(i, sc->keymap) ||
737 test_bit(i + 32, sc->keymap) ||
738 test_bit(i + 64, sc->keymap)))
742 for (i = IEEE80211_WEP_NKID; i < sc->keymax / 2; i++) {
743 if (!test_bit(i, sc->keymap) &&
744 test_bit(i + 64, sc->keymap))
746 if (test_bit(i, sc->keymap) &&
747 !test_bit(i + 64, sc->keymap))
752 /* No partially used TKIP slots, pick any available slot */
753 for (i = IEEE80211_WEP_NKID; i < sc->keymax; i++) {
754 /* Do not allow slots that could be needed for TKIP group keys
755 * to be used. This limitation could be removed if we know that
756 * TKIP will not be used. */
757 if (i >= 64 && i < 64 + IEEE80211_WEP_NKID)
760 if (i >= 32 && i < 32 + IEEE80211_WEP_NKID)
762 if (i >= 64 + 32 && i < 64 + 32 + IEEE80211_WEP_NKID)
766 if (!test_bit(i, sc->keymap))
767 return i; /* Found a free slot for a key */
770 /* No free slot found */
774 static int ath_key_config(struct ath_softc *sc,
775 struct ieee80211_vif *vif,
776 struct ieee80211_sta *sta,
777 struct ieee80211_key_conf *key)
779 struct ath9k_keyval hk;
780 const u8 *mac = NULL;
784 memset(&hk, 0, sizeof(hk));
788 hk.kv_type = ATH9K_CIPHER_WEP;
791 hk.kv_type = ATH9K_CIPHER_TKIP;
794 hk.kv_type = ATH9K_CIPHER_AES_CCM;
800 hk.kv_len = key->keylen;
801 memcpy(hk.kv_val, key->key, key->keylen);
803 if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
804 /* For now, use the default keys for broadcast keys. This may
805 * need to change with virtual interfaces. */
807 } else if (key->keyidx) {
812 if (vif->type != NL80211_IFTYPE_AP) {
813 /* Only keyidx 0 should be used with unicast key, but
814 * allow this for client mode for now. */
823 if (key->alg == ALG_TKIP)
824 idx = ath_reserve_key_cache_slot_tkip(sc);
826 idx = ath_reserve_key_cache_slot(sc);
828 return -ENOSPC; /* no free key cache entries */
831 if (key->alg == ALG_TKIP)
832 ret = ath_setkey_tkip(sc, idx, key->key, &hk, mac,
833 vif->type == NL80211_IFTYPE_AP);
835 ret = ath9k_hw_set_keycache_entry(sc->sc_ah, idx, &hk, mac);
840 set_bit(idx, sc->keymap);
841 if (key->alg == ALG_TKIP) {
842 set_bit(idx + 64, sc->keymap);
844 set_bit(idx + 32, sc->keymap);
845 set_bit(idx + 64 + 32, sc->keymap);
852 static void ath_key_delete(struct ath_softc *sc, struct ieee80211_key_conf *key)
854 ath9k_hw_keyreset(sc->sc_ah, key->hw_key_idx);
855 if (key->hw_key_idx < IEEE80211_WEP_NKID)
858 clear_bit(key->hw_key_idx, sc->keymap);
859 if (key->alg != ALG_TKIP)
862 clear_bit(key->hw_key_idx + 64, sc->keymap);
864 clear_bit(key->hw_key_idx + 32, sc->keymap);
865 clear_bit(key->hw_key_idx + 64 + 32, sc->keymap);
869 static void setup_ht_cap(struct ath_softc *sc,
870 struct ieee80211_sta_ht_cap *ht_info)
872 #define ATH9K_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */
873 #define ATH9K_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */
875 ht_info->ht_supported = true;
876 ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
877 IEEE80211_HT_CAP_SM_PS |
878 IEEE80211_HT_CAP_SGI_40 |
879 IEEE80211_HT_CAP_DSSSCCK40;
881 ht_info->ampdu_factor = ATH9K_HT_CAP_MAXRXAMPDU_65536;
882 ht_info->ampdu_density = ATH9K_HT_CAP_MPDUDENSITY_8;
884 /* set up supported mcs set */
885 memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
887 switch(sc->rx_chainmask) {
889 ht_info->mcs.rx_mask[0] = 0xff;
895 ht_info->mcs.rx_mask[0] = 0xff;
896 ht_info->mcs.rx_mask[1] = 0xff;
900 ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
903 static void ath9k_bss_assoc_info(struct ath_softc *sc,
904 struct ieee80211_vif *vif,
905 struct ieee80211_bss_conf *bss_conf)
907 struct ath_vif *avp = (void *)vif->drv_priv;
909 if (bss_conf->assoc) {
910 DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d, bssid: %pM\n",
911 bss_conf->aid, sc->curbssid);
913 /* New association, store aid */
914 if (avp->av_opmode == NL80211_IFTYPE_STATION) {
915 sc->curaid = bss_conf->aid;
916 ath9k_hw_write_associd(sc);
919 * Request a re-configuration of Beacon related timers
920 * on the receipt of the first Beacon frame (i.e.,
921 * after time sync with the AP).
923 sc->sc_flags |= SC_OP_BEACON_SYNC;
926 /* Configure the beacon */
927 ath_beacon_config(sc, vif);
929 /* Reset rssi stats */
930 sc->nodestats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER;
931 sc->nodestats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER;
932 sc->nodestats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER;
933 sc->nodestats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER;
937 DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
942 /********************************/
944 /********************************/
946 static void ath_led_blink_work(struct work_struct *work)
948 struct ath_softc *sc = container_of(work, struct ath_softc,
949 ath_led_blink_work.work);
951 if (!(sc->sc_flags & SC_OP_LED_ASSOCIATED))
954 if ((sc->led_on_duration == ATH_LED_ON_DURATION_IDLE) ||
955 (sc->led_off_duration == ATH_LED_OFF_DURATION_IDLE))
956 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0);
958 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN,
959 (sc->sc_flags & SC_OP_LED_ON) ? 1 : 0);
961 queue_delayed_work(sc->hw->workqueue, &sc->ath_led_blink_work,
962 (sc->sc_flags & SC_OP_LED_ON) ?
963 msecs_to_jiffies(sc->led_off_duration) :
964 msecs_to_jiffies(sc->led_on_duration));
966 sc->led_on_duration = sc->led_on_cnt ?
967 max((ATH_LED_ON_DURATION_IDLE - sc->led_on_cnt), 25) :
968 ATH_LED_ON_DURATION_IDLE;
969 sc->led_off_duration = sc->led_off_cnt ?
970 max((ATH_LED_OFF_DURATION_IDLE - sc->led_off_cnt), 10) :
971 ATH_LED_OFF_DURATION_IDLE;
972 sc->led_on_cnt = sc->led_off_cnt = 0;
973 if (sc->sc_flags & SC_OP_LED_ON)
974 sc->sc_flags &= ~SC_OP_LED_ON;
976 sc->sc_flags |= SC_OP_LED_ON;
979 static void ath_led_brightness(struct led_classdev *led_cdev,
980 enum led_brightness brightness)
982 struct ath_led *led = container_of(led_cdev, struct ath_led, led_cdev);
983 struct ath_softc *sc = led->sc;
985 switch (brightness) {
987 if (led->led_type == ATH_LED_ASSOC ||
988 led->led_type == ATH_LED_RADIO) {
989 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN,
990 (led->led_type == ATH_LED_RADIO));
991 sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
992 if (led->led_type == ATH_LED_RADIO)
993 sc->sc_flags &= ~SC_OP_LED_ON;
999 if (led->led_type == ATH_LED_ASSOC) {
1000 sc->sc_flags |= SC_OP_LED_ASSOCIATED;
1001 queue_delayed_work(sc->hw->workqueue,
1002 &sc->ath_led_blink_work, 0);
1003 } else if (led->led_type == ATH_LED_RADIO) {
1004 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0);
1005 sc->sc_flags |= SC_OP_LED_ON;
1015 static int ath_register_led(struct ath_softc *sc, struct ath_led *led,
1021 led->led_cdev.name = led->name;
1022 led->led_cdev.default_trigger = trigger;
1023 led->led_cdev.brightness_set = ath_led_brightness;
1025 ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->led_cdev);
1027 DPRINTF(sc, ATH_DBG_FATAL,
1028 "Failed to register led:%s", led->name);
1030 led->registered = 1;
1034 static void ath_unregister_led(struct ath_led *led)
1036 if (led->registered) {
1037 led_classdev_unregister(&led->led_cdev);
1038 led->registered = 0;
1042 static void ath_deinit_leds(struct ath_softc *sc)
1044 cancel_delayed_work_sync(&sc->ath_led_blink_work);
1045 ath_unregister_led(&sc->assoc_led);
1046 sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
1047 ath_unregister_led(&sc->tx_led);
1048 ath_unregister_led(&sc->rx_led);
1049 ath_unregister_led(&sc->radio_led);
1050 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
1053 static void ath_init_leds(struct ath_softc *sc)
1058 /* Configure gpio 1 for output */
1059 ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
1060 AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
1061 /* LED off, active low */
1062 ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
1064 INIT_DELAYED_WORK(&sc->ath_led_blink_work, ath_led_blink_work);
1066 trigger = ieee80211_get_radio_led_name(sc->hw);
1067 snprintf(sc->radio_led.name, sizeof(sc->radio_led.name),
1068 "ath9k-%s::radio", wiphy_name(sc->hw->wiphy));
1069 ret = ath_register_led(sc, &sc->radio_led, trigger);
1070 sc->radio_led.led_type = ATH_LED_RADIO;
1074 trigger = ieee80211_get_assoc_led_name(sc->hw);
1075 snprintf(sc->assoc_led.name, sizeof(sc->assoc_led.name),
1076 "ath9k-%s::assoc", wiphy_name(sc->hw->wiphy));
1077 ret = ath_register_led(sc, &sc->assoc_led, trigger);
1078 sc->assoc_led.led_type = ATH_LED_ASSOC;
1082 trigger = ieee80211_get_tx_led_name(sc->hw);
1083 snprintf(sc->tx_led.name, sizeof(sc->tx_led.name),
1084 "ath9k-%s::tx", wiphy_name(sc->hw->wiphy));
1085 ret = ath_register_led(sc, &sc->tx_led, trigger);
1086 sc->tx_led.led_type = ATH_LED_TX;
1090 trigger = ieee80211_get_rx_led_name(sc->hw);
1091 snprintf(sc->rx_led.name, sizeof(sc->rx_led.name),
1092 "ath9k-%s::rx", wiphy_name(sc->hw->wiphy));
1093 ret = ath_register_led(sc, &sc->rx_led, trigger);
1094 sc->rx_led.led_type = ATH_LED_RX;
1101 ath_deinit_leds(sc);
1104 void ath_radio_enable(struct ath_softc *sc)
1106 struct ath_hw *ah = sc->sc_ah;
1107 struct ieee80211_channel *channel = sc->hw->conf.channel;
1110 ath9k_ps_wakeup(sc);
1111 ath9k_hw_configpcipowersave(ah, 0);
1113 spin_lock_bh(&sc->sc_resetlock);
1114 r = ath9k_hw_reset(ah, ah->curchan, false);
1116 DPRINTF(sc, ATH_DBG_FATAL,
1117 "Unable to reset channel %u (%uMhz) ",
1118 "reset status %d\n",
1119 channel->center_freq, r);
1121 spin_unlock_bh(&sc->sc_resetlock);
1123 ath_update_txpow(sc);
1124 if (ath_startrecv(sc) != 0) {
1125 DPRINTF(sc, ATH_DBG_FATAL,
1126 "Unable to restart recv logic\n");
1130 if (sc->sc_flags & SC_OP_BEACONS)
1131 ath_beacon_config(sc, NULL); /* restart beacons */
1133 /* Re-Enable interrupts */
1134 ath9k_hw_set_interrupts(ah, sc->imask);
1137 ath9k_hw_cfg_output(ah, ATH_LED_PIN,
1138 AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
1139 ath9k_hw_set_gpio(ah, ATH_LED_PIN, 0);
1141 ieee80211_wake_queues(sc->hw);
1142 ath9k_ps_restore(sc);
1145 void ath_radio_disable(struct ath_softc *sc)
1147 struct ath_hw *ah = sc->sc_ah;
1148 struct ieee80211_channel *channel = sc->hw->conf.channel;
1151 ath9k_ps_wakeup(sc);
1152 ieee80211_stop_queues(sc->hw);
1155 ath9k_hw_set_gpio(ah, ATH_LED_PIN, 1);
1156 ath9k_hw_cfg_gpio_input(ah, ATH_LED_PIN);
1158 /* Disable interrupts */
1159 ath9k_hw_set_interrupts(ah, 0);
1161 ath_drain_all_txq(sc, false); /* clear pending tx frames */
1162 ath_stoprecv(sc); /* turn off frame recv */
1163 ath_flushrecv(sc); /* flush recv queue */
1165 spin_lock_bh(&sc->sc_resetlock);
1166 r = ath9k_hw_reset(ah, ah->curchan, false);
1168 DPRINTF(sc, ATH_DBG_FATAL,
1169 "Unable to reset channel %u (%uMhz) "
1170 "reset status %d\n",
1171 channel->center_freq, r);
1173 spin_unlock_bh(&sc->sc_resetlock);
1175 ath9k_hw_phy_disable(ah);
1176 ath9k_hw_configpcipowersave(ah, 1);
1177 ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
1178 ath9k_ps_restore(sc);
1181 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
1183 /*******************/
1185 /*******************/
1187 static bool ath_is_rfkill_set(struct ath_softc *sc)
1189 struct ath_hw *ah = sc->sc_ah;
1191 return ath9k_hw_gpio_get(ah, ah->rfkill_gpio) ==
1192 ah->rfkill_polarity;
1195 /* s/w rfkill handlers */
1196 static int ath_rfkill_set_block(void *data, bool blocked)
1198 struct ath_softc *sc = data;
1201 ath_radio_disable(sc);
1203 ath_radio_enable(sc);
1208 static void ath_rfkill_poll_state(struct rfkill *rfkill, void *data)
1210 struct ath_softc *sc = data;
1211 bool blocked = !!ath_is_rfkill_set(sc);
1213 if (rfkill_set_hw_state(rfkill, blocked))
1214 ath_radio_disable(sc);
1216 ath_radio_enable(sc);
1219 /* Init s/w rfkill */
1220 static int ath_init_sw_rfkill(struct ath_softc *sc)
1222 sc->rf_kill.ops.set_block = ath_rfkill_set_block;
1223 if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
1224 sc->rf_kill.ops.poll = ath_rfkill_poll_state;
1226 snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name),
1227 "ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy));
1229 sc->rf_kill.rfkill = rfkill_alloc(sc->rf_kill.rfkill_name,
1230 wiphy_dev(sc->hw->wiphy),
1232 &sc->rf_kill.ops, sc);
1233 if (!sc->rf_kill.rfkill) {
1234 DPRINTF(sc, ATH_DBG_FATAL, "Failed to allocate rfkill\n");
1241 /* Deinitialize rfkill */
1242 static void ath_deinit_rfkill(struct ath_softc *sc)
1244 if (sc->sc_flags & SC_OP_RFKILL_REGISTERED) {
1245 rfkill_unregister(sc->rf_kill.rfkill);
1246 rfkill_destroy(sc->rf_kill.rfkill);
1247 sc->sc_flags &= ~SC_OP_RFKILL_REGISTERED;
1251 static int ath_start_rfkill_poll(struct ath_softc *sc)
1253 if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) {
1254 if (rfkill_register(sc->rf_kill.rfkill)) {
1255 DPRINTF(sc, ATH_DBG_FATAL,
1256 "Unable to register rfkill\n");
1257 rfkill_destroy(sc->rf_kill.rfkill);
1259 /* Deinitialize the device */
1263 sc->sc_flags |= SC_OP_RFKILL_REGISTERED;
1269 #endif /* CONFIG_RFKILL */
1271 void ath_cleanup(struct ath_softc *sc)
1274 free_irq(sc->irq, sc);
1275 ath_bus_cleanup(sc);
1276 kfree(sc->sec_wiphy);
1277 ieee80211_free_hw(sc->hw);
1280 void ath_detach(struct ath_softc *sc)
1282 struct ieee80211_hw *hw = sc->hw;
1285 ath9k_ps_wakeup(sc);
1287 DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n");
1289 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
1290 ath_deinit_rfkill(sc);
1292 ath_deinit_leds(sc);
1293 cancel_work_sync(&sc->chan_work);
1294 cancel_delayed_work_sync(&sc->wiphy_work);
1296 for (i = 0; i < sc->num_sec_wiphy; i++) {
1297 struct ath_wiphy *aphy = sc->sec_wiphy[i];
1300 sc->sec_wiphy[i] = NULL;
1301 ieee80211_unregister_hw(aphy->hw);
1302 ieee80211_free_hw(aphy->hw);
1304 ieee80211_unregister_hw(hw);
1308 tasklet_kill(&sc->intr_tq);
1309 tasklet_kill(&sc->bcon_tasklet);
1311 if (!(sc->sc_flags & SC_OP_INVALID))
1312 ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
1314 /* cleanup tx queues */
1315 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
1316 if (ATH_TXQ_SETUP(sc, i))
1317 ath_tx_cleanupq(sc, &sc->tx.txq[i]);
1319 ath9k_hw_detach(sc->sc_ah);
1320 ath9k_exit_debug(sc);
1321 ath9k_ps_restore(sc);
1324 static int ath9k_reg_notifier(struct wiphy *wiphy,
1325 struct regulatory_request *request)
1327 struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
1328 struct ath_wiphy *aphy = hw->priv;
1329 struct ath_softc *sc = aphy->sc;
1330 struct ath_regulatory *reg = &sc->sc_ah->regulatory;
1332 return ath_reg_notifier_apply(wiphy, request, reg);
1335 static int ath_init(u16 devid, struct ath_softc *sc)
1337 struct ath_hw *ah = NULL;
1342 /* XXX: hardware will not be ready until ath_open() being called */
1343 sc->sc_flags |= SC_OP_INVALID;
1345 if (ath9k_init_debug(sc) < 0)
1346 printk(KERN_ERR "Unable to create debugfs files\n");
1348 spin_lock_init(&sc->wiphy_lock);
1349 spin_lock_init(&sc->sc_resetlock);
1350 spin_lock_init(&sc->sc_serial_rw);
1351 mutex_init(&sc->mutex);
1352 tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
1353 tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet,
1357 * Cache line size is used to size and align various
1358 * structures used to communicate with the hardware.
1360 ath_read_cachesize(sc, &csz);
1361 /* XXX assert csz is non-zero */
1362 sc->cachelsz = csz << 2; /* convert to bytes */
1364 ah = ath9k_hw_attach(devid, sc, &status);
1366 DPRINTF(sc, ATH_DBG_FATAL,
1367 "Unable to attach hardware; HAL status %d\n", status);
1373 /* Get the hardware key cache size. */
1374 sc->keymax = ah->caps.keycache_size;
1375 if (sc->keymax > ATH_KEYMAX) {
1376 DPRINTF(sc, ATH_DBG_ANY,
1377 "Warning, using only %u entries in %u key cache\n",
1378 ATH_KEYMAX, sc->keymax);
1379 sc->keymax = ATH_KEYMAX;
1383 * Reset the key cache since some parts do not
1384 * reset the contents on initial power up.
1386 for (i = 0; i < sc->keymax; i++)
1387 ath9k_hw_keyreset(ah, (u16) i);
1392 /* default to MONITOR mode */
1393 sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
1395 /* Setup rate tables */
1397 ath_rate_attach(sc);
1398 ath_setup_rates(sc, IEEE80211_BAND_2GHZ);
1399 ath_setup_rates(sc, IEEE80211_BAND_5GHZ);
1402 * Allocate hardware transmit queues: one queue for
1403 * beacon frames and one data queue for each QoS
1404 * priority. Note that the hal handles reseting
1405 * these queues at the needed time.
1407 sc->beacon.beaconq = ath_beaconq_setup(ah);
1408 if (sc->beacon.beaconq == -1) {
1409 DPRINTF(sc, ATH_DBG_FATAL,
1410 "Unable to setup a beacon xmit queue\n");
1414 sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
1415 if (sc->beacon.cabq == NULL) {
1416 DPRINTF(sc, ATH_DBG_FATAL,
1417 "Unable to setup CAB xmit queue\n");
1422 sc->config.cabqReadytime = ATH_CABQ_READY_TIME;
1423 ath_cabq_update(sc);
1425 for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++)
1426 sc->tx.hwq_map[i] = -1;
1428 /* Setup data queues */
1429 /* NB: ensure BK queue is the lowest priority h/w queue */
1430 if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
1431 DPRINTF(sc, ATH_DBG_FATAL,
1432 "Unable to setup xmit queue for BK traffic\n");
1437 if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
1438 DPRINTF(sc, ATH_DBG_FATAL,
1439 "Unable to setup xmit queue for BE traffic\n");
1443 if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
1444 DPRINTF(sc, ATH_DBG_FATAL,
1445 "Unable to setup xmit queue for VI traffic\n");
1449 if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
1450 DPRINTF(sc, ATH_DBG_FATAL,
1451 "Unable to setup xmit queue for VO traffic\n");
1456 /* Initializes the noise floor to a reasonable default value.
1457 * Later on this will be updated during ANI processing. */
1459 sc->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR;
1460 setup_timer(&sc->ani.timer, ath_ani_calibrate, (unsigned long)sc);
1462 if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
1463 ATH9K_CIPHER_TKIP, NULL)) {
1465 * Whether we should enable h/w TKIP MIC.
1466 * XXX: if we don't support WME TKIP MIC, then we wouldn't
1467 * report WMM capable, so it's always safe to turn on
1468 * TKIP MIC in this case.
1470 ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
1475 * Check whether the separate key cache entries
1476 * are required to handle both tx+rx MIC keys.
1477 * With split mic keys the number of stations is limited
1478 * to 27 otherwise 59.
1480 if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
1481 ATH9K_CIPHER_TKIP, NULL)
1482 && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
1483 ATH9K_CIPHER_MIC, NULL)
1484 && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
1488 /* turn on mcast key search if possible */
1489 if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
1490 (void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
1493 sc->config.txpowlimit = ATH_TXPOWER_MAX;
1495 /* 11n Capabilities */
1496 if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
1497 sc->sc_flags |= SC_OP_TXAGGR;
1498 sc->sc_flags |= SC_OP_RXAGGR;
1501 sc->tx_chainmask = ah->caps.tx_chainmask;
1502 sc->rx_chainmask = ah->caps.rx_chainmask;
1504 ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
1505 sc->rx.defant = ath9k_hw_getdefantenna(ah);
1507 if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
1508 memcpy(sc->bssidmask, ath_bcast_mac, ETH_ALEN);
1510 sc->beacon.slottime = ATH9K_SLOT_TIME_9; /* default to short slot time */
1512 /* initialize beacon slots */
1513 for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
1514 sc->beacon.bslot[i] = NULL;
1515 sc->beacon.bslot_aphy[i] = NULL;
1518 /* setup channels and rates */
1520 sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
1521 sc->sbands[IEEE80211_BAND_2GHZ].bitrates =
1522 sc->rates[IEEE80211_BAND_2GHZ];
1523 sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
1524 sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
1525 ARRAY_SIZE(ath9k_2ghz_chantable);
1527 if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
1528 sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
1529 sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
1530 sc->rates[IEEE80211_BAND_5GHZ];
1531 sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
1532 sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
1533 ARRAY_SIZE(ath9k_5ghz_chantable);
1536 if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX)
1537 ath9k_hw_btcoex_enable(sc->sc_ah);
1541 /* cleanup tx queues */
1542 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
1543 if (ATH_TXQ_SETUP(sc, i))
1544 ath_tx_cleanupq(sc, &sc->tx.txq[i]);
1547 ath9k_hw_detach(ah);
1548 ath9k_exit_debug(sc);
1553 void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
1555 hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
1556 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1557 IEEE80211_HW_SIGNAL_DBM |
1558 IEEE80211_HW_AMPDU_AGGREGATION |
1559 IEEE80211_HW_SUPPORTS_PS |
1560 IEEE80211_HW_PS_NULLFUNC_STACK |
1561 IEEE80211_HW_SPECTRUM_MGMT;
1563 if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || modparam_nohwcrypt)
1564 hw->flags |= IEEE80211_HW_MFP_CAPABLE;
1566 hw->wiphy->interface_modes =
1567 BIT(NL80211_IFTYPE_AP) |
1568 BIT(NL80211_IFTYPE_STATION) |
1569 BIT(NL80211_IFTYPE_ADHOC) |
1570 BIT(NL80211_IFTYPE_MESH_POINT);
1574 hw->channel_change_time = 5000;
1575 hw->max_listen_interval = 10;
1576 hw->max_rate_tries = ATH_11N_TXMAXTRY;
1577 hw->sta_data_size = sizeof(struct ath_node);
1578 hw->vif_data_size = sizeof(struct ath_vif);
1580 hw->rate_control_algorithm = "ath9k_rate_control";
1582 hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
1583 &sc->sbands[IEEE80211_BAND_2GHZ];
1584 if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
1585 hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
1586 &sc->sbands[IEEE80211_BAND_5GHZ];
1589 int ath_attach(u16 devid, struct ath_softc *sc)
1591 struct ieee80211_hw *hw = sc->hw;
1593 struct ath_regulatory *reg;
1595 DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
1597 error = ath_init(devid, sc);
1601 /* get mac address from hardware and set in mac80211 */
1603 SET_IEEE80211_PERM_ADDR(hw, sc->sc_ah->macaddr);
1605 ath_set_hw_capab(sc, hw);
1607 error = ath_regd_init(&sc->sc_ah->regulatory, sc->hw->wiphy,
1608 ath9k_reg_notifier);
1612 reg = &sc->sc_ah->regulatory;
1614 if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
1615 setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
1616 if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
1617 setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
1620 /* initialize tx/rx engine */
1621 error = ath_tx_init(sc, ATH_TXBUF);
1625 error = ath_rx_init(sc, ATH_RXBUF);
1629 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
1630 /* Initialize s/w rfkill */
1631 error = ath_init_sw_rfkill(sc);
1636 INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
1637 INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
1638 sc->wiphy_scheduler_int = msecs_to_jiffies(500);
1640 error = ieee80211_register_hw(hw);
1642 if (!ath_is_world_regd(reg)) {
1643 error = regulatory_hint(hw->wiphy, reg->alpha2);
1648 /* Initialize LED control */
1655 /* cleanup tx queues */
1656 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
1657 if (ATH_TXQ_SETUP(sc, i))
1658 ath_tx_cleanupq(sc, &sc->tx.txq[i]);
1660 ath9k_hw_detach(sc->sc_ah);
1661 ath9k_exit_debug(sc);
1666 int ath_reset(struct ath_softc *sc, bool retry_tx)
1668 struct ath_hw *ah = sc->sc_ah;
1669 struct ieee80211_hw *hw = sc->hw;
1672 ath9k_hw_set_interrupts(ah, 0);
1673 ath_drain_all_txq(sc, retry_tx);
1677 spin_lock_bh(&sc->sc_resetlock);
1678 r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false);
1680 DPRINTF(sc, ATH_DBG_FATAL,
1681 "Unable to reset hardware; reset status %d\n", r);
1682 spin_unlock_bh(&sc->sc_resetlock);
1684 if (ath_startrecv(sc) != 0)
1685 DPRINTF(sc, ATH_DBG_FATAL, "Unable to start recv logic\n");
1688 * We may be doing a reset in response to a request
1689 * that changes the channel so update any state that
1690 * might change as a result.
1692 ath_cache_conf_rate(sc, &hw->conf);
1694 ath_update_txpow(sc);
1696 if (sc->sc_flags & SC_OP_BEACONS)
1697 ath_beacon_config(sc, NULL); /* restart beacons */
1699 ath9k_hw_set_interrupts(ah, sc->imask);
1703 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
1704 if (ATH_TXQ_SETUP(sc, i)) {
1705 spin_lock_bh(&sc->tx.txq[i].axq_lock);
1706 ath_txq_schedule(sc, &sc->tx.txq[i]);
1707 spin_unlock_bh(&sc->tx.txq[i].axq_lock);
1716 * This function will allocate both the DMA descriptor structure, and the
1717 * buffers it contains. These are used to contain the descriptors used
1720 int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
1721 struct list_head *head, const char *name,
1722 int nbuf, int ndesc)
1724 #define DS2PHYS(_dd, _ds) \
1725 ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
1726 #define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
1727 #define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
1729 struct ath_desc *ds;
1731 int i, bsize, error;
1733 DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
1736 INIT_LIST_HEAD(head);
1737 /* ath_desc must be a multiple of DWORDs */
1738 if ((sizeof(struct ath_desc) % 4) != 0) {
1739 DPRINTF(sc, ATH_DBG_FATAL, "ath_desc not DWORD aligned\n");
1740 ASSERT((sizeof(struct ath_desc) % 4) == 0);
1745 dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
1748 * Need additional DMA memory because we can't use
1749 * descriptors that cross the 4K page boundary. Assume
1750 * one skipped descriptor per 4K page.
1752 if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) {
1754 ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len);
1757 while (ndesc_skipped) {
1758 dma_len = ndesc_skipped * sizeof(struct ath_desc);
1759 dd->dd_desc_len += dma_len;
1761 ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len);
1765 /* allocate descriptors */
1766 dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len,
1767 &dd->dd_desc_paddr, GFP_KERNEL);
1768 if (dd->dd_desc == NULL) {
1773 DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
1774 name, ds, (u32) dd->dd_desc_len,
1775 ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
1777 /* allocate buffers */
1778 bsize = sizeof(struct ath_buf) * nbuf;
1779 bf = kzalloc(bsize, GFP_KERNEL);
1786 for (i = 0; i < nbuf; i++, bf++, ds += ndesc) {
1788 bf->bf_daddr = DS2PHYS(dd, ds);
1790 if (!(sc->sc_ah->caps.hw_caps &
1791 ATH9K_HW_CAP_4KB_SPLITTRANS)) {
1793 * Skip descriptor addresses which can cause 4KB
1794 * boundary crossing (addr + length) with a 32 dword
1797 while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
1798 ASSERT((caddr_t) bf->bf_desc <
1799 ((caddr_t) dd->dd_desc +
1804 bf->bf_daddr = DS2PHYS(dd, ds);
1807 list_add_tail(&bf->list, head);
1811 dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
1814 memset(dd, 0, sizeof(*dd));
1816 #undef ATH_DESC_4KB_BOUND_CHECK
1817 #undef ATH_DESC_4KB_BOUND_NUM_SKIPPED
1821 void ath_descdma_cleanup(struct ath_softc *sc,
1822 struct ath_descdma *dd,
1823 struct list_head *head)
1825 dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
1828 INIT_LIST_HEAD(head);
1829 kfree(dd->dd_bufptr);
1830 memset(dd, 0, sizeof(*dd));
1833 int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
1839 qnum = sc->tx.hwq_map[ATH9K_WME_AC_VO];
1842 qnum = sc->tx.hwq_map[ATH9K_WME_AC_VI];
1845 qnum = sc->tx.hwq_map[ATH9K_WME_AC_BE];
1848 qnum = sc->tx.hwq_map[ATH9K_WME_AC_BK];
1851 qnum = sc->tx.hwq_map[ATH9K_WME_AC_BE];
1858 int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc)
1863 case ATH9K_WME_AC_VO:
1866 case ATH9K_WME_AC_VI:
1869 case ATH9K_WME_AC_BE:
1872 case ATH9K_WME_AC_BK:
1883 /* XXX: Remove me once we don't depend on ath9k_channel for all
1884 * this redundant data */
1885 void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw,
1886 struct ath9k_channel *ichan)
1888 struct ieee80211_channel *chan = hw->conf.channel;
1889 struct ieee80211_conf *conf = &hw->conf;
1891 ichan->channel = chan->center_freq;
1894 if (chan->band == IEEE80211_BAND_2GHZ) {
1895 ichan->chanmode = CHANNEL_G;
1896 ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM;
1898 ichan->chanmode = CHANNEL_A;
1899 ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
1902 sc->tx_chan_width = ATH9K_HT_MACMODE_20;
1904 if (conf_is_ht(conf)) {
1905 if (conf_is_ht40(conf))
1906 sc->tx_chan_width = ATH9K_HT_MACMODE_2040;
1908 ichan->chanmode = ath_get_extchanmode(sc, chan,
1909 conf->channel_type);
1913 /**********************/
1914 /* mac80211 callbacks */
1915 /**********************/
1917 static int ath9k_start(struct ieee80211_hw *hw)
1919 struct ath_wiphy *aphy = hw->priv;
1920 struct ath_softc *sc = aphy->sc;
1921 struct ieee80211_channel *curchan = hw->conf.channel;
1922 struct ath9k_channel *init_channel;
1925 DPRINTF(sc, ATH_DBG_CONFIG, "Starting driver with "
1926 "initial channel: %d MHz\n", curchan->center_freq);
1928 mutex_lock(&sc->mutex);
1930 if (ath9k_wiphy_started(sc)) {
1931 if (sc->chan_idx == curchan->hw_value) {
1933 * Already on the operational channel, the new wiphy
1934 * can be marked active.
1936 aphy->state = ATH_WIPHY_ACTIVE;
1937 ieee80211_wake_queues(hw);
1940 * Another wiphy is on another channel, start the new
1941 * wiphy in paused state.
1943 aphy->state = ATH_WIPHY_PAUSED;
1944 ieee80211_stop_queues(hw);
1946 mutex_unlock(&sc->mutex);
1949 aphy->state = ATH_WIPHY_ACTIVE;
1951 /* setup initial channel */
1953 pos = curchan->hw_value;
1956 init_channel = &sc->sc_ah->channels[pos];
1957 ath9k_update_ichannel(sc, hw, init_channel);
1959 /* Reset SERDES registers */
1960 ath9k_hw_configpcipowersave(sc->sc_ah, 0);
1963 * The basic interface to setting the hardware in a good
1964 * state is ``reset''. On return the hardware is known to
1965 * be powered up and with interrupts disabled. This must
1966 * be followed by initialization of the appropriate bits
1967 * and then setup of the interrupt mask.
1969 spin_lock_bh(&sc->sc_resetlock);
1970 r = ath9k_hw_reset(sc->sc_ah, init_channel, false);
1972 DPRINTF(sc, ATH_DBG_FATAL,
1973 "Unable to reset hardware; reset status %d "
1974 "(freq %u MHz)\n", r,
1975 curchan->center_freq);
1976 spin_unlock_bh(&sc->sc_resetlock);
1979 spin_unlock_bh(&sc->sc_resetlock);
1982 * This is needed only to setup initial state
1983 * but it's best done after a reset.
1985 ath_update_txpow(sc);
1988 * Setup the hardware after reset:
1989 * The receive engine is set going.
1990 * Frame transmit is handled entirely
1991 * in the frame output path; there's nothing to do
1992 * here except setup the interrupt mask.
1994 if (ath_startrecv(sc) != 0) {
1995 DPRINTF(sc, ATH_DBG_FATAL, "Unable to start recv logic\n");
2000 /* Setup our intr mask. */
2001 sc->imask = ATH9K_INT_RX | ATH9K_INT_TX
2002 | ATH9K_INT_RXEOL | ATH9K_INT_RXORN
2003 | ATH9K_INT_FATAL | ATH9K_INT_GLOBAL;
2005 if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_GTT)
2006 sc->imask |= ATH9K_INT_GTT;
2008 if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT)
2009 sc->imask |= ATH9K_INT_CST;
2011 ath_cache_conf_rate(sc, &hw->conf);
2013 sc->sc_flags &= ~SC_OP_INVALID;
2015 /* Disable BMISS interrupt when we're not associated */
2016 sc->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
2017 ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
2019 ieee80211_wake_queues(hw);
2021 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
2022 r = ath_start_rfkill_poll(sc);
2026 mutex_unlock(&sc->mutex);
2031 static int ath9k_tx(struct ieee80211_hw *hw,
2032 struct sk_buff *skb)
2034 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
2035 struct ath_wiphy *aphy = hw->priv;
2036 struct ath_softc *sc = aphy->sc;
2037 struct ath_tx_control txctl;
2038 int hdrlen, padsize;
2040 if (aphy->state != ATH_WIPHY_ACTIVE && aphy->state != ATH_WIPHY_SCAN) {
2041 printk(KERN_DEBUG "ath9k: %s: TX in unexpected wiphy state "
2042 "%d\n", wiphy_name(hw->wiphy), aphy->state);
2046 if (sc->hw->conf.flags & IEEE80211_CONF_PS) {
2047 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
2049 * mac80211 does not set PM field for normal data frames, so we
2050 * need to update that based on the current PS mode.
2052 if (ieee80211_is_data(hdr->frame_control) &&
2053 !ieee80211_is_nullfunc(hdr->frame_control) &&
2054 !ieee80211_has_pm(hdr->frame_control)) {
2055 DPRINTF(sc, ATH_DBG_PS, "Add PM=1 for a TX frame "
2056 "while in PS mode\n");
2057 hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
2061 if (unlikely(sc->sc_ah->power_mode != ATH9K_PM_AWAKE)) {
2063 * We are using PS-Poll and mac80211 can request TX while in
2064 * power save mode. Need to wake up hardware for the TX to be
2065 * completed and if needed, also for RX of buffered frames.
2067 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
2068 ath9k_ps_wakeup(sc);
2069 ath9k_hw_setrxabort(sc->sc_ah, 0);
2070 if (ieee80211_is_pspoll(hdr->frame_control)) {
2071 DPRINTF(sc, ATH_DBG_PS, "Sending PS-Poll to pick a "
2072 "buffered frame\n");
2073 sc->sc_flags |= SC_OP_WAIT_FOR_PSPOLL_DATA;
2075 DPRINTF(sc, ATH_DBG_PS, "Wake up to complete TX\n");
2076 sc->sc_flags |= SC_OP_WAIT_FOR_TX_ACK;
2079 * The actual restore operation will happen only after
2080 * the sc_flags bit is cleared. We are just dropping
2081 * the ps_usecount here.
2083 ath9k_ps_restore(sc);
2086 memset(&txctl, 0, sizeof(struct ath_tx_control));
2089 * As a temporary workaround, assign seq# here; this will likely need
2090 * to be cleaned up to work better with Beacon transmission and virtual
2093 if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
2094 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
2095 if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
2096 sc->tx.seq_no += 0x10;
2097 hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
2098 hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
2101 /* Add the padding after the header if this is not already done */
2102 hdrlen = ieee80211_get_hdrlen_from_skb(skb);
2104 padsize = hdrlen % 4;
2105 if (skb_headroom(skb) < padsize)
2107 skb_push(skb, padsize);
2108 memmove(skb->data, skb->data + padsize, hdrlen);
2111 /* Check if a tx queue is available */
2113 txctl.txq = ath_test_get_txq(sc, skb);
2117 DPRINTF(sc, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
2119 if (ath_tx_start(hw, skb, &txctl) != 0) {
2120 DPRINTF(sc, ATH_DBG_XMIT, "TX failed\n");
2126 dev_kfree_skb_any(skb);
2130 static void ath9k_stop(struct ieee80211_hw *hw)
2132 struct ath_wiphy *aphy = hw->priv;
2133 struct ath_softc *sc = aphy->sc;
2135 aphy->state = ATH_WIPHY_INACTIVE;
2137 if (sc->sc_flags & SC_OP_INVALID) {
2138 DPRINTF(sc, ATH_DBG_ANY, "Device not present\n");
2142 mutex_lock(&sc->mutex);
2144 ieee80211_stop_queues(hw);
2146 if (ath9k_wiphy_started(sc)) {
2147 mutex_unlock(&sc->mutex);
2148 return; /* another wiphy still in use */
2151 /* make sure h/w will not generate any interrupt
2152 * before setting the invalid flag. */
2153 ath9k_hw_set_interrupts(sc->sc_ah, 0);
2155 if (!(sc->sc_flags & SC_OP_INVALID)) {
2156 ath_drain_all_txq(sc, false);
2158 ath9k_hw_phy_disable(sc->sc_ah);
2160 sc->rx.rxlink = NULL;
2162 rfkill_pause_polling(sc->rf_kill.rfkill);
2164 /* disable HAL and put h/w to sleep */
2165 ath9k_hw_disable(sc->sc_ah);
2166 ath9k_hw_configpcipowersave(sc->sc_ah, 1);
2168 sc->sc_flags |= SC_OP_INVALID;
2170 mutex_unlock(&sc->mutex);
2172 DPRINTF(sc, ATH_DBG_CONFIG, "Driver halt\n");
2175 static int ath9k_add_interface(struct ieee80211_hw *hw,
2176 struct ieee80211_if_init_conf *conf)
2178 struct ath_wiphy *aphy = hw->priv;
2179 struct ath_softc *sc = aphy->sc;
2180 struct ath_vif *avp = (void *)conf->vif->drv_priv;
2181 enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED;
2184 mutex_lock(&sc->mutex);
2186 if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) &&
2192 switch (conf->type) {
2193 case NL80211_IFTYPE_STATION:
2194 ic_opmode = NL80211_IFTYPE_STATION;
2196 case NL80211_IFTYPE_ADHOC:
2197 case NL80211_IFTYPE_AP:
2198 case NL80211_IFTYPE_MESH_POINT:
2199 if (sc->nbcnvifs >= ATH_BCBUF) {
2203 ic_opmode = conf->type;
2206 DPRINTF(sc, ATH_DBG_FATAL,
2207 "Interface type %d not yet supported\n", conf->type);
2212 DPRINTF(sc, ATH_DBG_CONFIG, "Attach a VIF of type: %d\n", ic_opmode);
2214 /* Set the VIF opmode */
2215 avp->av_opmode = ic_opmode;
2220 if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
2221 ath9k_set_bssid_mask(hw);
2224 goto out; /* skip global settings for secondary vif */
2226 if (ic_opmode == NL80211_IFTYPE_AP) {
2227 ath9k_hw_set_tsfadjust(sc->sc_ah, 1);
2228 sc->sc_flags |= SC_OP_TSF_RESET;
2231 /* Set the device opmode */
2232 sc->sc_ah->opmode = ic_opmode;
2235 * Enable MIB interrupts when there are hardware phy counters.
2236 * Note we only do this (at the moment) for station mode.
2238 if ((conf->type == NL80211_IFTYPE_STATION) ||
2239 (conf->type == NL80211_IFTYPE_ADHOC) ||
2240 (conf->type == NL80211_IFTYPE_MESH_POINT)) {
2241 if (ath9k_hw_phycounters(sc->sc_ah))
2242 sc->imask |= ATH9K_INT_MIB;
2243 sc->imask |= ATH9K_INT_TSFOOR;
2246 ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
2248 if (conf->type == NL80211_IFTYPE_AP)
2252 mutex_unlock(&sc->mutex);
2256 static void ath9k_remove_interface(struct ieee80211_hw *hw,
2257 struct ieee80211_if_init_conf *conf)
2259 struct ath_wiphy *aphy = hw->priv;
2260 struct ath_softc *sc = aphy->sc;
2261 struct ath_vif *avp = (void *)conf->vif->drv_priv;
2264 DPRINTF(sc, ATH_DBG_CONFIG, "Detach Interface\n");
2266 mutex_lock(&sc->mutex);
2269 del_timer_sync(&sc->ani.timer);
2271 /* Reclaim beacon resources */
2272 if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
2273 (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
2274 (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
2275 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
2276 ath_beacon_return(sc, avp);
2279 sc->sc_flags &= ~SC_OP_BEACONS;
2281 for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
2282 if (sc->beacon.bslot[i] == conf->vif) {
2283 printk(KERN_DEBUG "%s: vif had allocated beacon "
2284 "slot\n", __func__);
2285 sc->beacon.bslot[i] = NULL;
2286 sc->beacon.bslot_aphy[i] = NULL;
2292 mutex_unlock(&sc->mutex);
2295 static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
2297 struct ath_wiphy *aphy = hw->priv;
2298 struct ath_softc *sc = aphy->sc;
2299 struct ieee80211_conf *conf = &hw->conf;
2300 struct ath_hw *ah = sc->sc_ah;
2302 mutex_lock(&sc->mutex);
2304 if (changed & IEEE80211_CONF_CHANGE_PS) {
2305 if (conf->flags & IEEE80211_CONF_PS) {
2306 if (!(ah->caps.hw_caps &
2307 ATH9K_HW_CAP_AUTOSLEEP)) {
2308 if ((sc->imask & ATH9K_INT_TIM_TIMER) == 0) {
2309 sc->imask |= ATH9K_INT_TIM_TIMER;
2310 ath9k_hw_set_interrupts(sc->sc_ah,
2313 ath9k_hw_setrxabort(sc->sc_ah, 1);
2315 ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
2317 ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
2318 if (!(ah->caps.hw_caps &
2319 ATH9K_HW_CAP_AUTOSLEEP)) {
2320 ath9k_hw_setrxabort(sc->sc_ah, 0);
2321 sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON |
2322 SC_OP_WAIT_FOR_CAB |
2323 SC_OP_WAIT_FOR_PSPOLL_DATA |
2324 SC_OP_WAIT_FOR_TX_ACK);
2325 if (sc->imask & ATH9K_INT_TIM_TIMER) {
2326 sc->imask &= ~ATH9K_INT_TIM_TIMER;
2327 ath9k_hw_set_interrupts(sc->sc_ah,
2334 if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
2335 struct ieee80211_channel *curchan = hw->conf.channel;
2336 int pos = curchan->hw_value;
2338 aphy->chan_idx = pos;
2339 aphy->chan_is_ht = conf_is_ht(conf);
2341 if (aphy->state == ATH_WIPHY_SCAN ||
2342 aphy->state == ATH_WIPHY_ACTIVE)
2343 ath9k_wiphy_pause_all_forced(sc, aphy);
2346 * Do not change operational channel based on a paused
2349 goto skip_chan_change;
2352 DPRINTF(sc, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
2353 curchan->center_freq);
2355 /* XXX: remove me eventualy */
2356 ath9k_update_ichannel(sc, hw, &sc->sc_ah->channels[pos]);
2358 ath_update_chainmask(sc, conf_is_ht(conf));
2360 if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
2361 DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n");
2362 mutex_unlock(&sc->mutex);
2368 if (changed & IEEE80211_CONF_CHANGE_POWER)
2369 sc->config.txpowlimit = 2 * conf->power_level;
2371 mutex_unlock(&sc->mutex);
2376 #define SUPPORTED_FILTERS \
2377 (FIF_PROMISC_IN_BSS | \
2381 FIF_BCN_PRBRESP_PROMISC | \
2384 /* FIXME: sc->sc_full_reset ? */
2385 static void ath9k_configure_filter(struct ieee80211_hw *hw,
2386 unsigned int changed_flags,
2387 unsigned int *total_flags,
2389 struct dev_mc_list *mclist)
2391 struct ath_wiphy *aphy = hw->priv;
2392 struct ath_softc *sc = aphy->sc;
2395 changed_flags &= SUPPORTED_FILTERS;
2396 *total_flags &= SUPPORTED_FILTERS;
2398 sc->rx.rxfilter = *total_flags;
2399 ath9k_ps_wakeup(sc);
2400 rfilt = ath_calcrxfilter(sc);
2401 ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
2402 ath9k_ps_restore(sc);
2404 DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", sc->rx.rxfilter);
2407 static void ath9k_sta_notify(struct ieee80211_hw *hw,
2408 struct ieee80211_vif *vif,
2409 enum sta_notify_cmd cmd,
2410 struct ieee80211_sta *sta)
2412 struct ath_wiphy *aphy = hw->priv;
2413 struct ath_softc *sc = aphy->sc;
2416 case STA_NOTIFY_ADD:
2417 ath_node_attach(sc, sta);
2419 case STA_NOTIFY_REMOVE:
2420 ath_node_detach(sc, sta);
2427 static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
2428 const struct ieee80211_tx_queue_params *params)
2430 struct ath_wiphy *aphy = hw->priv;
2431 struct ath_softc *sc = aphy->sc;
2432 struct ath9k_tx_queue_info qi;
2435 if (queue >= WME_NUM_AC)
2438 mutex_lock(&sc->mutex);
2440 memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
2442 qi.tqi_aifs = params->aifs;
2443 qi.tqi_cwmin = params->cw_min;
2444 qi.tqi_cwmax = params->cw_max;
2445 qi.tqi_burstTime = params->txop;
2446 qnum = ath_get_hal_qnum(queue, sc);
2448 DPRINTF(sc, ATH_DBG_CONFIG,
2449 "Configure tx [queue/halq] [%d/%d], "
2450 "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
2451 queue, qnum, params->aifs, params->cw_min,
2452 params->cw_max, params->txop);
2454 ret = ath_txq_update(sc, qnum, &qi);
2456 DPRINTF(sc, ATH_DBG_FATAL, "TXQ Update failed\n");
2458 mutex_unlock(&sc->mutex);
2463 static int ath9k_set_key(struct ieee80211_hw *hw,
2464 enum set_key_cmd cmd,
2465 struct ieee80211_vif *vif,
2466 struct ieee80211_sta *sta,
2467 struct ieee80211_key_conf *key)
2469 struct ath_wiphy *aphy = hw->priv;
2470 struct ath_softc *sc = aphy->sc;
2473 if (modparam_nohwcrypt)
2476 mutex_lock(&sc->mutex);
2477 ath9k_ps_wakeup(sc);
2478 DPRINTF(sc, ATH_DBG_CONFIG, "Set HW Key\n");
2482 ret = ath_key_config(sc, vif, sta, key);
2484 key->hw_key_idx = ret;
2485 /* push IV and Michael MIC generation to stack */
2486 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
2487 if (key->alg == ALG_TKIP)
2488 key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
2489 if (sc->sc_ah->sw_mgmt_crypto && key->alg == ALG_CCMP)
2490 key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
2495 ath_key_delete(sc, key);
2501 ath9k_ps_restore(sc);
2502 mutex_unlock(&sc->mutex);
2507 static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
2508 struct ieee80211_vif *vif,
2509 struct ieee80211_bss_conf *bss_conf,
2512 struct ath_wiphy *aphy = hw->priv;
2513 struct ath_softc *sc = aphy->sc;
2514 struct ath_hw *ah = sc->sc_ah;
2515 struct ath_vif *avp = (void *)vif->drv_priv;
2519 mutex_lock(&sc->mutex);
2522 * TODO: Need to decide which hw opmode to use for
2523 * multi-interface cases
2524 * XXX: This belongs into add_interface!
2526 if (vif->type == NL80211_IFTYPE_AP &&
2527 ah->opmode != NL80211_IFTYPE_AP) {
2528 ah->opmode = NL80211_IFTYPE_STATION;
2529 ath9k_hw_setopmode(ah);
2530 memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN);
2532 ath9k_hw_write_associd(sc);
2533 /* Request full reset to get hw opmode changed properly */
2534 sc->sc_flags |= SC_OP_FULL_RESET;
2537 if ((changed & BSS_CHANGED_BSSID) &&
2538 !is_zero_ether_addr(bss_conf->bssid)) {
2539 switch (vif->type) {
2540 case NL80211_IFTYPE_STATION:
2541 case NL80211_IFTYPE_ADHOC:
2542 case NL80211_IFTYPE_MESH_POINT:
2544 memcpy(sc->curbssid, bss_conf->bssid, ETH_ALEN);
2545 memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
2547 ath9k_hw_write_associd(sc);
2549 /* Set aggregation protection mode parameters */
2550 sc->config.ath_aggr_prot = 0;
2552 DPRINTF(sc, ATH_DBG_CONFIG,
2553 "RX filter 0x%x bssid %pM aid 0x%x\n",
2554 rfilt, sc->curbssid, sc->curaid);
2556 /* need to reconfigure the beacon */
2557 sc->sc_flags &= ~SC_OP_BEACONS ;
2565 if ((vif->type == NL80211_IFTYPE_ADHOC) ||
2566 (vif->type == NL80211_IFTYPE_AP) ||
2567 (vif->type == NL80211_IFTYPE_MESH_POINT)) {
2568 if ((changed & BSS_CHANGED_BEACON) ||
2569 (changed & BSS_CHANGED_BEACON_ENABLED &&
2570 bss_conf->enable_beacon)) {
2572 * Allocate and setup the beacon frame.
2574 * Stop any previous beacon DMA. This may be
2575 * necessary, for example, when an ibss merge
2576 * causes reconfiguration; we may be called
2577 * with beacon transmission active.
2579 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
2581 error = ath_beacon_alloc(aphy, vif);
2583 ath_beacon_config(sc, vif);
2587 /* Check for WLAN_CAPABILITY_PRIVACY ? */
2588 if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
2589 for (i = 0; i < IEEE80211_WEP_NKID; i++)
2590 if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
2591 ath9k_hw_keysetmac(sc->sc_ah,
2596 /* Only legacy IBSS for now */
2597 if (vif->type == NL80211_IFTYPE_ADHOC)
2598 ath_update_chainmask(sc, 0);
2600 if (changed & BSS_CHANGED_ERP_PREAMBLE) {
2601 DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
2602 bss_conf->use_short_preamble);
2603 if (bss_conf->use_short_preamble)
2604 sc->sc_flags |= SC_OP_PREAMBLE_SHORT;
2606 sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT;
2609 if (changed & BSS_CHANGED_ERP_CTS_PROT) {
2610 DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
2611 bss_conf->use_cts_prot);
2612 if (bss_conf->use_cts_prot &&
2613 hw->conf.channel->band != IEEE80211_BAND_5GHZ)
2614 sc->sc_flags |= SC_OP_PROTECT_ENABLE;
2616 sc->sc_flags &= ~SC_OP_PROTECT_ENABLE;
2619 if (changed & BSS_CHANGED_ASSOC) {
2620 DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
2622 ath9k_bss_assoc_info(sc, vif, bss_conf);
2626 * The HW TSF has to be reset when the beacon interval changes.
2627 * We set the flag here, and ath_beacon_config_ap() would take this
2628 * into account when it gets called through the subsequent
2629 * config_interface() call - with IFCC_BEACON in the changed field.
2632 if (changed & BSS_CHANGED_BEACON_INT) {
2633 sc->sc_flags |= SC_OP_TSF_RESET;
2634 sc->beacon_interval = bss_conf->beacon_int;
2637 mutex_unlock(&sc->mutex);
2640 static u64 ath9k_get_tsf(struct ieee80211_hw *hw)
2643 struct ath_wiphy *aphy = hw->priv;
2644 struct ath_softc *sc = aphy->sc;
2646 mutex_lock(&sc->mutex);
2647 tsf = ath9k_hw_gettsf64(sc->sc_ah);
2648 mutex_unlock(&sc->mutex);
2653 static void ath9k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
2655 struct ath_wiphy *aphy = hw->priv;
2656 struct ath_softc *sc = aphy->sc;
2658 mutex_lock(&sc->mutex);
2659 ath9k_hw_settsf64(sc->sc_ah, tsf);
2660 mutex_unlock(&sc->mutex);
2663 static void ath9k_reset_tsf(struct ieee80211_hw *hw)
2665 struct ath_wiphy *aphy = hw->priv;
2666 struct ath_softc *sc = aphy->sc;
2668 mutex_lock(&sc->mutex);
2669 ath9k_hw_reset_tsf(sc->sc_ah);
2670 mutex_unlock(&sc->mutex);
2673 static int ath9k_ampdu_action(struct ieee80211_hw *hw,
2674 enum ieee80211_ampdu_mlme_action action,
2675 struct ieee80211_sta *sta,
2678 struct ath_wiphy *aphy = hw->priv;
2679 struct ath_softc *sc = aphy->sc;
2683 case IEEE80211_AMPDU_RX_START:
2684 if (!(sc->sc_flags & SC_OP_RXAGGR))
2687 case IEEE80211_AMPDU_RX_STOP:
2689 case IEEE80211_AMPDU_TX_START:
2690 ret = ath_tx_aggr_start(sc, sta, tid, ssn);
2692 DPRINTF(sc, ATH_DBG_FATAL,
2693 "Unable to start TX aggregation\n");
2695 ieee80211_start_tx_ba_cb_irqsafe(hw, sta->addr, tid);
2697 case IEEE80211_AMPDU_TX_STOP:
2698 ret = ath_tx_aggr_stop(sc, sta, tid);
2700 DPRINTF(sc, ATH_DBG_FATAL,
2701 "Unable to stop TX aggregation\n");
2703 ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid);
2705 case IEEE80211_AMPDU_TX_OPERATIONAL:
2706 ath_tx_aggr_resume(sc, sta, tid);
2709 DPRINTF(sc, ATH_DBG_FATAL, "Unknown AMPDU action\n");
2715 static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
2717 struct ath_wiphy *aphy = hw->priv;
2718 struct ath_softc *sc = aphy->sc;
2720 if (ath9k_wiphy_scanning(sc)) {
2721 printk(KERN_DEBUG "ath9k: Two wiphys trying to scan at the "
2724 * Do not allow the concurrent scanning state for now. This
2725 * could be improved with scanning control moved into ath9k.
2730 aphy->state = ATH_WIPHY_SCAN;
2731 ath9k_wiphy_pause_all_forced(sc, aphy);
2733 mutex_lock(&sc->mutex);
2734 sc->sc_flags |= SC_OP_SCANNING;
2735 mutex_unlock(&sc->mutex);
2738 static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
2740 struct ath_wiphy *aphy = hw->priv;
2741 struct ath_softc *sc = aphy->sc;
2743 mutex_lock(&sc->mutex);
2744 aphy->state = ATH_WIPHY_ACTIVE;
2745 sc->sc_flags &= ~SC_OP_SCANNING;
2746 sc->sc_flags |= SC_OP_FULL_RESET;
2747 mutex_unlock(&sc->mutex);
2750 struct ieee80211_ops ath9k_ops = {
2752 .start = ath9k_start,
2754 .add_interface = ath9k_add_interface,
2755 .remove_interface = ath9k_remove_interface,
2756 .config = ath9k_config,
2757 .configure_filter = ath9k_configure_filter,
2758 .sta_notify = ath9k_sta_notify,
2759 .conf_tx = ath9k_conf_tx,
2760 .bss_info_changed = ath9k_bss_info_changed,
2761 .set_key = ath9k_set_key,
2762 .get_tsf = ath9k_get_tsf,
2763 .set_tsf = ath9k_set_tsf,
2764 .reset_tsf = ath9k_reset_tsf,
2765 .ampdu_action = ath9k_ampdu_action,
2766 .sw_scan_start = ath9k_sw_scan_start,
2767 .sw_scan_complete = ath9k_sw_scan_complete,
2773 } ath_mac_bb_names[] = {
2774 { AR_SREV_VERSION_5416_PCI, "5416" },
2775 { AR_SREV_VERSION_5416_PCIE, "5418" },
2776 { AR_SREV_VERSION_9100, "9100" },
2777 { AR_SREV_VERSION_9160, "9160" },
2778 { AR_SREV_VERSION_9280, "9280" },
2779 { AR_SREV_VERSION_9285, "9285" }
2785 } ath_rf_names[] = {
2787 { AR_RAD5133_SREV_MAJOR, "5133" },
2788 { AR_RAD5122_SREV_MAJOR, "5122" },
2789 { AR_RAD2133_SREV_MAJOR, "2133" },
2790 { AR_RAD2122_SREV_MAJOR, "2122" }
2794 * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown.
2797 ath_mac_bb_name(u32 mac_bb_version)
2801 for (i=0; i<ARRAY_SIZE(ath_mac_bb_names); i++) {
2802 if (ath_mac_bb_names[i].version == mac_bb_version) {
2803 return ath_mac_bb_names[i].name;
2811 * Return the RF name. "????" is returned if the RF is unknown.
2814 ath_rf_name(u16 rf_version)
2818 for (i=0; i<ARRAY_SIZE(ath_rf_names); i++) {
2819 if (ath_rf_names[i].version == rf_version) {
2820 return ath_rf_names[i].name;
2827 static int __init ath9k_init(void)
2831 /* Register rate control algorithm */
2832 error = ath_rate_control_register();
2835 "ath9k: Unable to register rate control "
2841 error = ath9k_debug_create_root();
2844 "ath9k: Unable to create debugfs root: %d\n",
2846 goto err_rate_unregister;
2849 error = ath_pci_init();
2852 "ath9k: No PCI devices found, driver not installed.\n");
2854 goto err_remove_root;
2857 error = ath_ahb_init();
2869 ath9k_debug_remove_root();
2870 err_rate_unregister:
2871 ath_rate_control_unregister();
2875 module_init(ath9k_init);
2877 static void __exit ath9k_exit(void)
2881 ath9k_debug_remove_root();
2882 ath_rate_control_unregister();
2883 printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
2885 module_exit(ath9k_exit);