git.oblomov.eu Git - linux-2.6/blob - drivers/acpi/parser/psloop.c

   1 /******************************************************************************
   2  *
   3  * Module Name: psloop - Main AML parse loop
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2008, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 /*
  45  * Parse the AML and build an operation tree as most interpreters, (such as
  46  * Perl) do. Parsing is done by hand rather than with a YACC generated parser
  47  * to tightly constrain stack and dynamic memory usage. Parsing is kept
  48  * flexible and the code fairly compact by parsing based on a list of AML
  49  * opcode templates in aml_op_info[].
  50  */
  51
  52 #include <acpi/acpi.h>
  53 #include <acpi/acparser.h>
  54 #include <acpi/acdispat.h>
  55 #include <acpi/amlcode.h>
  56
  57 #define _COMPONENT          ACPI_PARSER
  58 ACPI_MODULE_NAME("psloop")
  59
  60 static u32 acpi_gbl_depth = 0;
  61
  62 /* Local prototypes */
  63
  64 static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state);
  65
  66 static acpi_status
  67 acpi_ps_build_named_op(struct acpi_walk_state *walk_state,
  68                        u8 * aml_op_start,
  69                        union acpi_parse_object *unnamed_op,
  70                        union acpi_parse_object **op);
  71
  72 static acpi_status
  73 acpi_ps_create_op(struct acpi_walk_state *walk_state,
  74                   u8 * aml_op_start, union acpi_parse_object **new_op);
  75
  76 static acpi_status
  77 acpi_ps_get_arguments(struct acpi_walk_state *walk_state,
  78                       u8 * aml_op_start, union acpi_parse_object *op);
  79
  80 static acpi_status
  81 acpi_ps_complete_op(struct acpi_walk_state *walk_state,
  82                     union acpi_parse_object **op, acpi_status status);
  83
  84 static acpi_status
  85 acpi_ps_complete_final_op(struct acpi_walk_state *walk_state,
  86                           union acpi_parse_object *op, acpi_status status);
  87
  88 /*******************************************************************************
  89  *
  90  * FUNCTION:    acpi_ps_get_aml_opcode
  91  *
  92  * PARAMETERS:  walk_state          - Current state
  93  *
  94  * RETURN:      Status
  95  *
  96  * DESCRIPTION: Extract the next AML opcode from the input stream.
  97  *
  98  ******************************************************************************/
  99
 100 static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state)
 101 {
 102
 103         ACPI_FUNCTION_TRACE_PTR(ps_get_aml_opcode, walk_state);
 104
 105         walk_state->aml_offset =
 106             (u32) ACPI_PTR_DIFF(walk_state->parser_state.aml,
 107                                 walk_state->parser_state.aml_start);
 108         walk_state->opcode = acpi_ps_peek_opcode(&(walk_state->parser_state));
 109
 110         /*
 111          * First cut to determine what we have found:
 112          * 1) A valid AML opcode
 113          * 2) A name string
 114          * 3) An unknown/invalid opcode
 115          */
 116         walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
 117
 118         switch (walk_state->op_info->class) {
 119         case AML_CLASS_ASCII:
 120         case AML_CLASS_PREFIX:
 121                 /*
 122                  * Starts with a valid prefix or ASCII char, this is a name
 123                  * string. Convert the bare name string to a namepath.
 124                  */
 125                 walk_state->opcode = AML_INT_NAMEPATH_OP;
 126                 walk_state->arg_types = ARGP_NAMESTRING;
 127                 break;
 128
 129         case AML_CLASS_UNKNOWN:
 130
 131                 /* The opcode is unrecognized. Just skip unknown opcodes */
 132
 133                 ACPI_ERROR((AE_INFO,
 134                             "Found unknown opcode %X at AML address %p offset %X, ignoring",
 135                             walk_state->opcode, walk_state->parser_state.aml,
 136                             walk_state->aml_offset));
 137
 138                 ACPI_DUMP_BUFFER(walk_state->parser_state.aml, 128);
 139
 140                 /* Assume one-byte bad opcode */
 141
 142                 walk_state->parser_state.aml++;
 143                 return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
 144
 145         default:
 146
 147                 /* Found opcode info, this is a normal opcode */
 148
 149                 walk_state->parser_state.aml +=
 150                     acpi_ps_get_opcode_size(walk_state->opcode);
 151                 walk_state->arg_types = walk_state->op_info->parse_args;
 152                 break;
 153         }
 154
 155         return_ACPI_STATUS(AE_OK);
 156 }
 157
 158 /*******************************************************************************
 159  *
 160  * FUNCTION:    acpi_ps_build_named_op
 161  *
 162  * PARAMETERS:  walk_state          - Current state
 163  *              aml_op_start        - Begin of named Op in AML
 164  *              unnamed_op          - Early Op (not a named Op)
 165  *              Op                  - Returned Op
 166  *
 167  * RETURN:      Status
 168  *
 169  * DESCRIPTION: Parse a named Op
 170  *
 171  ******************************************************************************/
 172
 173 static acpi_status
 174 acpi_ps_build_named_op(struct acpi_walk_state *walk_state,
 175                        u8 * aml_op_start,
 176                        union acpi_parse_object *unnamed_op,
 177                        union acpi_parse_object **op)
 178 {
 179         acpi_status status = AE_OK;
 180         union acpi_parse_object *arg = NULL;
 181
 182         ACPI_FUNCTION_TRACE_PTR(ps_build_named_op, walk_state);
 183
 184         unnamed_op->common.value.arg = NULL;
 185         unnamed_op->common.arg_list_length = 0;
 186         unnamed_op->common.aml_opcode = walk_state->opcode;
 187
 188         /*
 189          * Get and append arguments until we find the node that contains
 190          * the name (the type ARGP_NAME).
 191          */
 192         while (GET_CURRENT_ARG_TYPE(walk_state->arg_types) &&
 193                (GET_CURRENT_ARG_TYPE(walk_state->arg_types) != ARGP_NAME)) {
 194                 status =
 195                     acpi_ps_get_next_arg(walk_state,
 196                                          &(walk_state->parser_state),
 197                                          GET_CURRENT_ARG_TYPE(walk_state->
 198                                                               arg_types), &arg);
 199                 if (ACPI_FAILURE(status)) {
 200                         return_ACPI_STATUS(status);
 201                 }
 202
 203                 acpi_ps_append_arg(unnamed_op, arg);
 204                 INCREMENT_ARG_LIST(walk_state->arg_types);
 205         }
 206
 207         /*
 208          * Make sure that we found a NAME and didn't run out of arguments
 209          */
 210         if (!GET_CURRENT_ARG_TYPE(walk_state->arg_types)) {
 211                 return_ACPI_STATUS(AE_AML_NO_OPERAND);
 212         }
 213
 214         /* We know that this arg is a name, move to next arg */
 215
 216         INCREMENT_ARG_LIST(walk_state->arg_types);
 217
 218         /*
 219          * Find the object. This will either insert the object into
 220          * the namespace or simply look it up
 221          */
 222         walk_state->op = NULL;
 223
 224         status = walk_state->descending_callback(walk_state, op);
 225         if (ACPI_FAILURE(status)) {
 226                 ACPI_EXCEPTION((AE_INFO, status, "During name lookup/catalog"));
 227                 return_ACPI_STATUS(status);
 228         }
 229
 230         if (!*op) {
 231                 return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
 232         }
 233
 234         status = acpi_ps_next_parse_state(walk_state, *op, status);
 235         if (ACPI_FAILURE(status)) {
 236                 if (status == AE_CTRL_PENDING) {
 237                         return_ACPI_STATUS(AE_CTRL_PARSE_PENDING);
 238                 }
 239                 return_ACPI_STATUS(status);
 240         }
 241
 242         acpi_ps_append_arg(*op, unnamed_op->common.value.arg);
 243         acpi_gbl_depth++;
 244
 245         if ((*op)->common.aml_opcode == AML_REGION_OP ||
 246             (*op)->common.aml_opcode == AML_DATA_REGION_OP) {
 247                 /*
 248                  * Defer final parsing of an operation_region body, because we don't
 249                  * have enough info in the first pass to parse it correctly (i.e.,
 250                  * there may be method calls within the term_arg elements of the body.)
 251                  *
 252                  * However, we must continue parsing because the opregion is not a
 253                  * standalone package -- we don't know where the end is at this point.
 254                  *
 255                  * (Length is unknown until parse of the body complete)
 256                  */
 257                 (*op)->named.data = aml_op_start;
 258                 (*op)->named.length = 0;
 259         }
 260
 261         return_ACPI_STATUS(AE_OK);
 262 }
 263
 264 /*******************************************************************************
 265  *
 266  * FUNCTION:    acpi_ps_create_op
 267  *
 268  * PARAMETERS:  walk_state          - Current state
 269  *              aml_op_start        - Op start in AML
 270  *              new_op              - Returned Op
 271  *
 272  * RETURN:      Status
 273  *
 274  * DESCRIPTION: Get Op from AML
 275  *
 276  ******************************************************************************/
 277
 278 static acpi_status
 279 acpi_ps_create_op(struct acpi_walk_state *walk_state,
 280                   u8 * aml_op_start, union acpi_parse_object **new_op)
 281 {
 282         acpi_status status = AE_OK;
 283         union acpi_parse_object *op;
 284         union acpi_parse_object *named_op = NULL;
 285         union acpi_parse_object *parent_scope;
 286         u8 argument_count;
 287         const struct acpi_opcode_info *op_info;
 288
 289         ACPI_FUNCTION_TRACE_PTR(ps_create_op, walk_state);
 290
 291         status = acpi_ps_get_aml_opcode(walk_state);
 292         if (status == AE_CTRL_PARSE_CONTINUE) {
 293                 return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
 294         }
 295
 296         /* Create Op structure and append to parent's argument list */
 297
 298         walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
 299         op = acpi_ps_alloc_op(walk_state->opcode);
 300         if (!op) {
 301                 return_ACPI_STATUS(AE_NO_MEMORY);
 302         }
 303
 304         if (walk_state->op_info->flags & AML_NAMED) {
 305                 status =
 306                     acpi_ps_build_named_op(walk_state, aml_op_start, op,
 307                                            &named_op);
 308                 acpi_ps_free_op(op);
 309                 if (ACPI_FAILURE(status)) {
 310                         return_ACPI_STATUS(status);
 311                 }
 312
 313                 *new_op = named_op;
 314                 return_ACPI_STATUS(AE_OK);
 315         }
 316
 317         /* Not a named opcode, just allocate Op and append to parent */
 318
 319         if (walk_state->op_info->flags & AML_CREATE) {
 320                 /*
 321                  * Backup to beginning of create_xXXfield declaration
 322                  * body_length is unknown until we parse the body
 323                  */
 324                 op->named.data = aml_op_start;
 325                 op->named.length = 0;
 326         }
 327
 328         if (walk_state->opcode == AML_BANK_FIELD_OP) {
 329                 /*
 330                  * Backup to beginning of bank_field declaration
 331                  * body_length is unknown until we parse the body
 332                  */
 333                 op->named.data = aml_op_start;
 334                 op->named.length = 0;
 335         }
 336
 337         parent_scope = acpi_ps_get_parent_scope(&(walk_state->parser_state));
 338         acpi_ps_append_arg(parent_scope, op);
 339
 340         if (parent_scope) {
 341                 op_info =
 342                     acpi_ps_get_opcode_info(parent_scope->common.aml_opcode);
 343                 if (op_info->flags & AML_HAS_TARGET) {
 344                         argument_count =
 345                             acpi_ps_get_argument_count(op_info->type);
 346                         if (parent_scope->common.arg_list_length >
 347                             argument_count) {
 348                                 op->common.flags |= ACPI_PARSEOP_TARGET;
 349                         }
 350                 } else if (parent_scope->common.aml_opcode == AML_INCREMENT_OP) {
 351                         op->common.flags |= ACPI_PARSEOP_TARGET;
 352                 }
 353         }
 354
 355         if (walk_state->descending_callback != NULL) {
 356                 /*
 357                  * Find the object. This will either insert the object into
 358                  * the namespace or simply look it up
 359                  */
 360                 walk_state->op = *new_op = op;
 361
 362                 status = walk_state->descending_callback(walk_state, &op);
 363                 status = acpi_ps_next_parse_state(walk_state, op, status);
 364                 if (status == AE_CTRL_PENDING) {
 365                         status = AE_CTRL_PARSE_PENDING;
 366                 }
 367         }
 368
 369         return_ACPI_STATUS(status);
 370 }
 371
 372 /*******************************************************************************
 373  *
 374  * FUNCTION:    acpi_ps_get_arguments
 375  *
 376  * PARAMETERS:  walk_state          - Current state
 377  *              aml_op_start        - Op start in AML
 378  *              Op                  - Current Op
 379  *
 380  * RETURN:      Status
 381  *
 382  * DESCRIPTION: Get arguments for passed Op.
 383  *
 384  ******************************************************************************/
 385
 386 static acpi_status
 387 acpi_ps_get_arguments(struct acpi_walk_state *walk_state,
 388                       u8 * aml_op_start, union acpi_parse_object *op)
 389 {
 390         acpi_status status = AE_OK;
 391         union acpi_parse_object *arg = NULL;
 392
 393         ACPI_FUNCTION_TRACE_PTR(ps_get_arguments, walk_state);
 394
 395         switch (op->common.aml_opcode) {
 396         case AML_BYTE_OP:       /* AML_BYTEDATA_ARG */
 397         case AML_WORD_OP:       /* AML_WORDDATA_ARG */
 398         case AML_DWORD_OP:      /* AML_DWORDATA_ARG */
 399         case AML_QWORD_OP:      /* AML_QWORDATA_ARG */
 400         case AML_STRING_OP:     /* AML_ASCIICHARLIST_ARG */
 401
 402                 /* Fill in constant or string argument directly */
 403
 404                 acpi_ps_get_next_simple_arg(&(walk_state->parser_state),
 405                                             GET_CURRENT_ARG_TYPE(walk_state->
 406                                                                  arg_types),
 407                                             op);
 408                 break;
 409
 410         case AML_INT_NAMEPATH_OP:       /* AML_NAMESTRING_ARG */
 411
 412                 status =
 413                     acpi_ps_get_next_namepath(walk_state,
 414                                               &(walk_state->parser_state), op,
 415                                               1);
 416                 if (ACPI_FAILURE(status)) {
 417                         return_ACPI_STATUS(status);
 418                 }
 419
 420                 walk_state->arg_types = 0;
 421                 break;
 422
 423         default:
 424                 /*
 425                  * Op is not a constant or string, append each argument to the Op
 426                  */
 427                 while (GET_CURRENT_ARG_TYPE(walk_state->arg_types)
 428                        && !walk_state->arg_count) {
 429                         walk_state->aml_offset =
 430                             (u32) ACPI_PTR_DIFF(walk_state->parser_state.aml,
 431                                                 walk_state->parser_state.
 432                                                 aml_start);
 433
 434                         status =
 435                             acpi_ps_get_next_arg(walk_state,
 436                                                  &(walk_state->parser_state),
 437                                                  GET_CURRENT_ARG_TYPE
 438                                                  (walk_state->arg_types), &arg);
 439                         if (ACPI_FAILURE(status)) {
 440                                 return_ACPI_STATUS(status);
 441                         }
 442
 443                         if (arg) {
 444                                 arg->common.aml_offset = walk_state->aml_offset;
 445                                 acpi_ps_append_arg(op, arg);
 446                         }
 447
 448                         INCREMENT_ARG_LIST(walk_state->arg_types);
 449                 }
 450
 451                 /* Special processing for certain opcodes */
 452
 453                 /* TBD (remove): Temporary mechanism to disable this code if needed */
 454
 455 #ifdef ACPI_ENABLE_MODULE_LEVEL_CODE
 456
 457                 if ((walk_state->pass_number <= ACPI_IMODE_LOAD_PASS1) &&
 458                     ((walk_state->parse_flags & ACPI_PARSE_DISASSEMBLE) == 0)) {
 459                         /*
 460                          * We want to skip If/Else/While constructs during Pass1 because we
 461                          * want to actually conditionally execute the code during Pass2.
 462                          *
 463                          * Except for disassembly, where we always want to walk the
 464                          * If/Else/While packages
 465                          */
 466                         switch (op->common.aml_opcode) {
 467                         case AML_IF_OP:
 468                         case AML_ELSE_OP:
 469                         case AML_WHILE_OP:
 470
 471                                 ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
 472                                                   "Pass1: Skipping an If/Else/While body\n"));
 473
 474                                 /* Skip body of if/else/while in pass 1 */
 475
 476                                 walk_state->parser_state.aml =
 477                                     walk_state->parser_state.pkg_end;
 478                                 walk_state->arg_count = 0;
 479                                 break;
 480
 481                         default:
 482                                 break;
 483                         }
 484                 }
 485 #endif
 486
 487                 switch (op->common.aml_opcode) {
 488                 case AML_METHOD_OP:
 489                         /*
 490                          * Skip parsing of control method because we don't have enough
 491                          * info in the first pass to parse it correctly.
 492                          *
 493                          * Save the length and address of the body
 494                          */
 495                         op->named.data = walk_state->parser_state.aml;
 496                         op->named.length = (u32)
 497                             (walk_state->parser_state.pkg_end -
 498                              walk_state->parser_state.aml);
 499
 500                         /* Skip body of method */
 501
 502                         walk_state->parser_state.aml =
 503                             walk_state->parser_state.pkg_end;
 504                         walk_state->arg_count = 0;
 505                         break;
 506
 507                 case AML_BUFFER_OP:
 508                 case AML_PACKAGE_OP:
 509                 case AML_VAR_PACKAGE_OP:
 510
 511                         if ((op->common.parent) &&
 512                             (op->common.parent->common.aml_opcode ==
 513                              AML_NAME_OP)
 514                             && (walk_state->pass_number <=
 515                                 ACPI_IMODE_LOAD_PASS2)) {
 516                                 /*
 517                                  * Skip parsing of Buffers and Packages because we don't have
 518                                  * enough info in the first pass to parse them correctly.
 519                                  */
 520                                 op->named.data = aml_op_start;
 521                                 op->named.length = (u32)
 522                                     (walk_state->parser_state.pkg_end -
 523                                      aml_op_start);
 524
 525                                 /* Skip body */
 526
 527                                 walk_state->parser_state.aml =
 528                                     walk_state->parser_state.pkg_end;
 529                                 walk_state->arg_count = 0;
 530                         }
 531                         break;
 532
 533                 case AML_WHILE_OP:
 534
 535                         if (walk_state->control_state) {
 536                                 walk_state->control_state->control.package_end =
 537                                     walk_state->parser_state.pkg_end;
 538                         }
 539                         break;
 540
 541                 default:
 542
 543                         /* No action for all other opcodes */
 544                         break;
 545                 }
 546
 547                 break;
 548         }
 549
 550         return_ACPI_STATUS(AE_OK);
 551 }
 552
 553 /*******************************************************************************
 554  *
 555  * FUNCTION:    acpi_ps_complete_op
 556  *
 557  * PARAMETERS:  walk_state          - Current state
 558  *              Op                  - Returned Op
 559  *              Status              - Parse status before complete Op
 560  *
 561  * RETURN:      Status
 562  *
 563  * DESCRIPTION: Complete Op
 564  *
 565  ******************************************************************************/
 566
 567 static acpi_status
 568 acpi_ps_complete_op(struct acpi_walk_state *walk_state,
 569                     union acpi_parse_object **op, acpi_status status)
 570 {
 571         acpi_status status2;
 572
 573         ACPI_FUNCTION_TRACE_PTR(ps_complete_op, walk_state);
 574
 575         /*
 576          * Finished one argument of the containing scope
 577          */
 578         walk_state->parser_state.scope->parse_scope.arg_count--;
 579
 580         /* Close this Op (will result in parse subtree deletion) */
 581
 582         status2 = acpi_ps_complete_this_op(walk_state, *op);
 583         if (ACPI_FAILURE(status2)) {
 584                 return_ACPI_STATUS(status2);
 585         }
 586
 587         *op = NULL;
 588
 589         switch (status) {
 590         case AE_OK:
 591                 break;
 592
 593         case AE_CTRL_TRANSFER:
 594
 595                 /* We are about to transfer to a called method */
 596
 597                 walk_state->prev_op = NULL;
 598                 walk_state->prev_arg_types = walk_state->arg_types;
 599                 return_ACPI_STATUS(status);
 600
 601         case AE_CTRL_END:
 602
 603                 acpi_ps_pop_scope(&(walk_state->parser_state), op,
 604                                   &walk_state->arg_types,
 605                                   &walk_state->arg_count);
 606
 607                 if (*op) {
 608                         walk_state->op = *op;
 609                         walk_state->op_info =
 610                             acpi_ps_get_opcode_info((*op)->common.aml_opcode);
 611                         walk_state->opcode = (*op)->common.aml_opcode;
 612
 613                         status = walk_state->ascending_callback(walk_state);
 614                         status =
 615                             acpi_ps_next_parse_state(walk_state, *op, status);
 616
 617                         status2 = acpi_ps_complete_this_op(walk_state, *op);
 618                         if (ACPI_FAILURE(status2)) {
 619                                 return_ACPI_STATUS(status2);
 620                         }
 621                 }
 622
 623                 status = AE_OK;
 624                 break;
 625
 626         case AE_CTRL_BREAK:
 627         case AE_CTRL_CONTINUE:
 628
 629                 /* Pop off scopes until we find the While */
 630
 631                 while (!(*op) || ((*op)->common.aml_opcode != AML_WHILE_OP)) {
 632                         acpi_ps_pop_scope(&(walk_state->parser_state), op,
 633                                           &walk_state->arg_types,
 634                                           &walk_state->arg_count);
 635                 }
 636
 637                 /* Close this iteration of the While loop */
 638
 639                 walk_state->op = *op;
 640                 walk_state->op_info =
 641                     acpi_ps_get_opcode_info((*op)->common.aml_opcode);
 642                 walk_state->opcode = (*op)->common.aml_opcode;
 643
 644                 status = walk_state->ascending_callback(walk_state);
 645                 status = acpi_ps_next_parse_state(walk_state, *op, status);
 646
 647                 status2 = acpi_ps_complete_this_op(walk_state, *op);
 648                 if (ACPI_FAILURE(status2)) {
 649                         return_ACPI_STATUS(status2);
 650                 }
 651
 652                 status = AE_OK;
 653                 break;
 654
 655         case AE_CTRL_TERMINATE:
 656
 657                 /* Clean up */
 658                 do {
 659                         if (*op) {
 660                                 status2 =
 661                                     acpi_ps_complete_this_op(walk_state, *op);
 662                                 if (ACPI_FAILURE(status2)) {
 663                                         return_ACPI_STATUS(status2);
 664                                 }
 665
 666                                 acpi_ut_delete_generic_state
 667                                     (acpi_ut_pop_generic_state
 668                                      (&walk_state->control_state));
 669                         }
 670
 671                         acpi_ps_pop_scope(&(walk_state->parser_state), op,
 672                                           &walk_state->arg_types,
 673                                           &walk_state->arg_count);
 674
 675                 } while (*op);
 676
 677                 return_ACPI_STATUS(AE_OK);
 678
 679         default:                /* All other non-AE_OK status */
 680
 681                 do {
 682                         if (*op) {
 683                                 status2 =
 684                                     acpi_ps_complete_this_op(walk_state, *op);
 685                                 if (ACPI_FAILURE(status2)) {
 686                                         return_ACPI_STATUS(status2);
 687                                 }
 688                         }
 689
 690                         acpi_ps_pop_scope(&(walk_state->parser_state), op,
 691                                           &walk_state->arg_types,
 692                                           &walk_state->arg_count);
 693
 694                 } while (*op);
 695
 696 #if 0
 697                 /*
 698                  * TBD: Cleanup parse ops on error
 699                  */
 700                 if (*op == NULL) {
 701                         acpi_ps_pop_scope(parser_state, op,
 702                                           &walk_state->arg_types,
 703                                           &walk_state->arg_count);
 704                 }
 705 #endif
 706                 walk_state->prev_op = NULL;
 707                 walk_state->prev_arg_types = walk_state->arg_types;
 708                 return_ACPI_STATUS(status);
 709         }
 710
 711         /* This scope complete? */
 712
 713         if (acpi_ps_has_completed_scope(&(walk_state->parser_state))) {
 714                 acpi_ps_pop_scope(&(walk_state->parser_state), op,
 715                                   &walk_state->arg_types,
 716                                   &walk_state->arg_count);
 717                 ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "Popped scope, Op=%p\n", *op));
 718         } else {
 719                 *op = NULL;
 720         }
 721
 722         ACPI_PREEMPTION_POINT();
 723
 724         return_ACPI_STATUS(AE_OK);
 725 }
 726
 727 /*******************************************************************************
 728  *
 729  * FUNCTION:    acpi_ps_complete_final_op
 730  *
 731  * PARAMETERS:  walk_state          - Current state
 732  *              Op                  - Current Op
 733  *              Status              - Current parse status before complete last
 734  *                                    Op
 735  *
 736  * RETURN:      Status
 737  *
 738  * DESCRIPTION: Complete last Op.
 739  *
 740  ******************************************************************************/
 741
 742 static acpi_status
 743 acpi_ps_complete_final_op(struct acpi_walk_state *walk_state,
 744                           union acpi_parse_object *op, acpi_status status)
 745 {
 746         acpi_status status2;
 747
 748         ACPI_FUNCTION_TRACE_PTR(ps_complete_final_op, walk_state);
 749
 750         /*
 751          * Complete the last Op (if not completed), and clear the scope stack.
 752          * It is easily possible to end an AML "package" with an unbounded number
 753          * of open scopes (such as when several ASL blocks are closed with
 754          * sequential closing braces). We want to terminate each one cleanly.
 755          */
 756         ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "AML package complete at Op %p\n",
 757                           op));
 758         do {
 759                 if (op) {
 760                         if (walk_state->ascending_callback != NULL) {
 761                                 walk_state->op = op;
 762                                 walk_state->op_info =
 763                                     acpi_ps_get_opcode_info(op->common.
 764                                                             aml_opcode);
 765                                 walk_state->opcode = op->common.aml_opcode;
 766
 767                                 status =
 768                                     walk_state->ascending_callback(walk_state);
 769                                 status =
 770                                     acpi_ps_next_parse_state(walk_state, op,
 771                                                              status);
 772                                 if (status == AE_CTRL_PENDING) {
 773                                         status =
 774                                             acpi_ps_complete_op(walk_state, &op,
 775                                                                 AE_OK);
 776                                         if (ACPI_FAILURE(status)) {
 777                                                 return_ACPI_STATUS(status);
 778                                         }
 779                                 }
 780
 781                                 if (status == AE_CTRL_TERMINATE) {
 782                                         status = AE_OK;
 783
 784                                         /* Clean up */
 785                                         do {
 786                                                 if (op) {
 787                                                         status2 =
 788                                                             acpi_ps_complete_this_op
 789                                                             (walk_state, op);
 790                                                         if (ACPI_FAILURE
 791                                                             (status2)) {
 792                                                                 return_ACPI_STATUS
 793                                                                     (status2);
 794                                                         }
 795                                                 }
 796
 797                                                 acpi_ps_pop_scope(&
 798                                                                   (walk_state->
 799                                                                    parser_state),
 800                                                                   &op,
 801                                                                   &walk_state->
 802                                                                   arg_types,
 803                                                                   &walk_state->
 804                                                                   arg_count);
 805
 806                                         } while (op);
 807
 808                                         return_ACPI_STATUS(status);
 809                                 }
 810
 811                                 else if (ACPI_FAILURE(status)) {
 812
 813                                         /* First error is most important */
 814
 815                                         (void)
 816                                             acpi_ps_complete_this_op(walk_state,
 817                                                                      op);
 818                                         return_ACPI_STATUS(status);
 819                                 }
 820                         }
 821
 822                         status2 = acpi_ps_complete_this_op(walk_state, op);
 823                         if (ACPI_FAILURE(status2)) {
 824                                 return_ACPI_STATUS(status2);
 825                         }
 826                 }
 827
 828                 acpi_ps_pop_scope(&(walk_state->parser_state), &op,
 829                                   &walk_state->arg_types,
 830                                   &walk_state->arg_count);
 831
 832         } while (op);
 833
 834         return_ACPI_STATUS(status);
 835 }
 836
 837 /*******************************************************************************
 838  *
 839  * FUNCTION:    acpi_ps_parse_loop
 840  *
 841  * PARAMETERS:  walk_state          - Current state
 842  *
 843  * RETURN:      Status
 844  *
 845  * DESCRIPTION: Parse AML (pointed to by the current parser state) and return
 846  *              a tree of ops.
 847  *
 848  ******************************************************************************/
 849
 850 acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state)
 851 {
 852         acpi_status status = AE_OK;
 853         union acpi_parse_object *op = NULL;     /* current op */
 854         struct acpi_parse_state *parser_state;
 855         u8 *aml_op_start = NULL;
 856
 857         ACPI_FUNCTION_TRACE_PTR(ps_parse_loop, walk_state);
 858
 859         if (walk_state->descending_callback == NULL) {
 860                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 861         }
 862
 863         parser_state = &walk_state->parser_state;
 864         walk_state->arg_types = 0;
 865
 866 #if (!defined (ACPI_NO_METHOD_EXECUTION) && !defined (ACPI_CONSTANT_EVAL_ONLY))
 867
 868         if (walk_state->walk_type & ACPI_WALK_METHOD_RESTART) {
 869
 870                 /* We are restarting a preempted control method */
 871
 872                 if (acpi_ps_has_completed_scope(parser_state)) {
 873                         /*
 874                          * We must check if a predicate to an IF or WHILE statement
 875                          * was just completed
 876                          */
 877                         if ((parser_state->scope->parse_scope.op) &&
 878                             ((parser_state->scope->parse_scope.op->common.
 879                               aml_opcode == AML_IF_OP)
 880                              || (parser_state->scope->parse_scope.op->common.
 881                                  aml_opcode == AML_WHILE_OP))
 882                             && (walk_state->control_state)
 883                             && (walk_state->control_state->common.state ==
 884                                 ACPI_CONTROL_PREDICATE_EXECUTING)) {
 885                                 /*
 886                                  * A predicate was just completed, get the value of the
 887                                  * predicate and branch based on that value
 888                                  */
 889                                 walk_state->op = NULL;
 890                                 status =
 891                                     acpi_ds_get_predicate_value(walk_state,
 892                                                                 ACPI_TO_POINTER
 893                                                                 (TRUE));
 894                                 if (ACPI_FAILURE(status)
 895                                     && ((status & AE_CODE_MASK) !=
 896                                         AE_CODE_CONTROL)) {
 897                                         if (status == AE_AML_NO_RETURN_VALUE) {
 898                                                 ACPI_EXCEPTION((AE_INFO, status,
 899                                                                 "Invoked method did not return a value"));
 900
 901                                         }
 902
 903                                         ACPI_EXCEPTION((AE_INFO, status,
 904                                                         "GetPredicate Failed"));
 905                                         return_ACPI_STATUS(status);
 906                                 }
 907
 908                                 status =
 909                                     acpi_ps_next_parse_state(walk_state, op,
 910                                                              status);
 911                         }
 912
 913                         acpi_ps_pop_scope(parser_state, &op,
 914                                           &walk_state->arg_types,
 915                                           &walk_state->arg_count);
 916                         ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
 917                                           "Popped scope, Op=%p\n", op));
 918                 } else if (walk_state->prev_op) {
 919
 920                         /* We were in the middle of an op */
 921
 922                         op = walk_state->prev_op;
 923                         walk_state->arg_types = walk_state->prev_arg_types;
 924                 }
 925         }
 926 #endif
 927
 928         /* Iterative parsing loop, while there is more AML to process: */
 929
 930         while ((parser_state->aml < parser_state->aml_end) || (op)) {
 931                 aml_op_start = parser_state->aml;
 932                 if (!op) {
 933                         status =
 934                             acpi_ps_create_op(walk_state, aml_op_start, &op);
 935                         if (ACPI_FAILURE(status)) {
 936                                 if (status == AE_CTRL_PARSE_CONTINUE) {
 937                                         continue;
 938                                 }
 939
 940                                 if (status == AE_CTRL_PARSE_PENDING) {
 941                                         status = AE_OK;
 942                                 }
 943
 944                                 status =
 945                                     acpi_ps_complete_op(walk_state, &op,
 946                                                         status);
 947                                 if (ACPI_FAILURE(status)) {
 948                                         return_ACPI_STATUS(status);
 949                                 }
 950
 951                                 continue;
 952                         }
 953
 954                         op->common.aml_offset = walk_state->aml_offset;
 955
 956                         if (walk_state->op_info) {
 957                                 ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
 958                                                   "Opcode %4.4X [%s] Op %p Aml %p AmlOffset %5.5X\n",
 959                                                   (u32) op->common.aml_opcode,
 960                                                   walk_state->op_info->name, op,
 961                                                   parser_state->aml,
 962                                                   op->common.aml_offset));
 963                         }
 964                 }
 965
 966                 /*
 967                  * Start arg_count at zero because we don't know if there are
 968                  * any args yet
 969                  */
 970                 walk_state->arg_count = 0;
 971
 972                 /* Are there any arguments that must be processed? */
 973
 974                 if (walk_state->arg_types) {
 975
 976                         /* Get arguments */
 977
 978                         status =
 979                             acpi_ps_get_arguments(walk_state, aml_op_start, op);
 980                         if (ACPI_FAILURE(status)) {
 981                                 status =
 982                                     acpi_ps_complete_op(walk_state, &op,
 983                                                         status);
 984                                 if (ACPI_FAILURE(status)) {
 985                                         return_ACPI_STATUS(status);
 986                                 }
 987
 988                                 continue;
 989                         }
 990                 }
 991
 992                 /* Check for arguments that need to be processed */
 993
 994                 if (walk_state->arg_count) {
 995                         /*
 996                          * There are arguments (complex ones), push Op and
 997                          * prepare for argument
 998                          */
 999                         status = acpi_ps_push_scope(parser_state, op,
1000                                                     walk_state->arg_types,
1001                                                     walk_state->arg_count);
1002                         if (ACPI_FAILURE(status)) {
1003                                 status =
1004                                     acpi_ps_complete_op(walk_state, &op,
1005                                                         status);
1006                                 if (ACPI_FAILURE(status)) {
1007                                         return_ACPI_STATUS(status);
1008                                 }
1009
1010                                 continue;
1011                         }
1012
1013                         op = NULL;
1014                         continue;
1015                 }
1016
1017                 /*
1018                  * All arguments have been processed -- Op is complete,
1019                  * prepare for next
1020                  */
1021                 walk_state->op_info =
1022                     acpi_ps_get_opcode_info(op->common.aml_opcode);
1023                 if (walk_state->op_info->flags & AML_NAMED) {
1024                         if (acpi_gbl_depth) {
1025                                 acpi_gbl_depth--;
1026                         }
1027
1028                         if (op->common.aml_opcode == AML_REGION_OP ||
1029                             op->common.aml_opcode == AML_DATA_REGION_OP) {
1030                                 /*
1031                                  * Skip parsing of control method or opregion body,
1032                                  * because we don't have enough info in the first pass
1033                                  * to parse them correctly.
1034                                  *
1035                                  * Completed parsing an op_region declaration, we now
1036                                  * know the length.
1037                                  */
1038                                 op->named.length =
1039                                     (u32) (parser_state->aml - op->named.data);
1040                         }
1041                 }
1042
1043                 if (walk_state->op_info->flags & AML_CREATE) {
1044                         /*
1045                          * Backup to beginning of create_xXXfield declaration (1 for
1046                          * Opcode)
1047                          *
1048                          * body_length is unknown until we parse the body
1049                          */
1050                         op->named.length =
1051                             (u32) (parser_state->aml - op->named.data);
1052                 }
1053
1054                 if (op->common.aml_opcode == AML_BANK_FIELD_OP) {
1055                         /*
1056                          * Backup to beginning of bank_field declaration
1057                          *
1058                          * body_length is unknown until we parse the body
1059                          */
1060                         op->named.length =
1061                             (u32) (parser_state->aml - op->named.data);
1062                 }
1063
1064                 /* This op complete, notify the dispatcher */
1065
1066                 if (walk_state->ascending_callback != NULL) {
1067                         walk_state->op = op;
1068                         walk_state->opcode = op->common.aml_opcode;
1069
1070                         status = walk_state->ascending_callback(walk_state);
1071                         status =
1072                             acpi_ps_next_parse_state(walk_state, op, status);
1073                         if (status == AE_CTRL_PENDING) {
1074                                 status = AE_OK;
1075                         }
1076                 }
1077
1078                 status = acpi_ps_complete_op(walk_state, &op, status);
1079                 if (ACPI_FAILURE(status)) {
1080                         return_ACPI_STATUS(status);
1081                 }
1082
1083         }                       /* while parser_state->Aml */
1084
1085         status = acpi_ps_complete_final_op(walk_state, op, status);
1086         return_ACPI_STATUS(status);
1087 }