2 * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
4 * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
6 * see flexcop.c for copyright information.
8 #include <media/tuner.h>
20 #include "tuner-simple.h"
32 static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
34 struct flexcop_device *fc = fe->dvb->priv;
36 deb_tuner("polarity/voltage = %u\n", voltage);
38 v = fc->read_ibi_reg(fc, misc_204);
41 v.misc_204.ACPI1_sig = 1;
44 v.misc_204.ACPI1_sig = 0;
45 v.misc_204.LNB_L_H_sig = 0;
48 v.misc_204.ACPI1_sig = 0;
49 v.misc_204.LNB_L_H_sig = 1;
52 err("unknown SEC_VOLTAGE value");
55 return fc->write_ibi_reg(fc, misc_204, v);
58 static int flexcop_sleep(struct dvb_frontend* fe)
60 struct flexcop_device *fc = fe->dvb->priv;
61 /* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
64 return fc->fe_sleep(fe);
66 /* v.misc_204.ACPI3_sig = 1;
67 fc->write_ibi_reg(fc,misc_204,v);*/
72 static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
74 /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
75 struct flexcop_device *fc = fe->dvb->priv;
80 deb_tuner("tone = %u\n",tone);
90 err("unknown SEC_TONE value");
94 v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
96 v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax;
97 v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax;
99 return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
102 static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
104 flexcop_set_tone(fe, SEC_TONE_ON);
105 udelay(data ? 500 : 1000);
106 flexcop_set_tone(fe, SEC_TONE_OFF);
107 udelay(data ? 1000 : 500);
110 static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
114 for (i = 7; i >= 0; i--) {
117 flexcop_diseqc_send_bit(fe, d);
120 flexcop_diseqc_send_bit(fe, par);
123 static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst)
127 flexcop_set_tone(fe, SEC_TONE_OFF);
130 for (i = 0; i < len; i++)
131 flexcop_diseqc_send_byte(fe,msg[i]);
137 flexcop_diseqc_send_byte(fe, 0xff);
139 flexcop_set_tone(fe, SEC_TONE_ON);
142 flexcop_set_tone(fe, SEC_TONE_OFF);
149 static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
151 return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
154 static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
156 return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
160 static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
165 if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
166 else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
167 else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
168 else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
169 else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
170 else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
172 stv0299_writereg (fe, 0x13, aclk);
173 stv0299_writereg (fe, 0x14, bclk);
174 stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
175 stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
176 stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
181 static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
185 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
186 struct flexcop_device *fc = fe->dvb->priv;
188 div = params->frequency / 125;
190 buf[0] = (div >> 8) & 0x7f;
192 buf[2] = 0x84; /* 0xC4 */
195 if (params->frequency < 1500000)
198 if (fe->ops.i2c_gate_ctrl)
199 fe->ops.i2c_gate_ctrl(fe, 1);
200 if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
205 static u8 samsung_tbmu24112_inittab[] = {
250 static struct stv0299_config samsung_tbmu24112_config = {
251 .demod_address = 0x68,
252 .inittab = samsung_tbmu24112_inittab,
256 .lock_output = STV0299_LOCKOUTPUT_LK,
257 .volt13_op0_op1 = STV0299_VOLT13_OP1,
259 .set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
263 static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
265 static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
266 static u8 mt352_reset [] = { 0x50, 0x80 };
267 static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
268 static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
269 static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
271 mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
273 mt352_write(fe, mt352_reset, sizeof(mt352_reset));
274 mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
276 mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
277 mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
282 static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend* fe, struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
285 unsigned char bs = 0;
290 #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
291 div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
293 if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
294 if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
295 if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
298 pllbuf[1] = div >> 8;
299 pllbuf[2] = div & 0xff;
306 static struct mt352_config samsung_tdtc9251dh0_config = {
307 .demod_address = 0x0f,
308 .demod_init = samsung_tdtc9251dh0_demod_init,
311 static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
313 struct flexcop_device *fc = fe->dvb->priv;
314 return request_firmware(fw, name, fc->dev);
317 static struct lgdt330x_config air2pc_atsc_hd5000_config = {
318 .demod_address = 0x59,
319 .demod_chip = LGDT3303,
321 .clock_polarity_flip = 1,
324 static struct nxt200x_config samsung_tbmv_config = {
325 .demod_address = 0x0a,
328 static struct bcm3510_config air2pc_atsc_first_gen_config = {
329 .demod_address = 0x0f,
330 .request_firmware = flexcop_fe_request_firmware,
333 static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
337 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
338 struct flexcop_device *fc = fe->dvb->priv;
340 div = (params->frequency + (125/2)) / 125;
342 buf[0] = (div >> 8) & 0x7f;
343 buf[1] = (div >> 0) & 0xff;
344 buf[2] = 0x84 | ((div >> 10) & 0x60);
347 if (params->frequency < 1550000)
350 if (fe->ops.i2c_gate_ctrl)
351 fe->ops.i2c_gate_ctrl(fe, 1);
352 if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
357 static struct mt312_config skystar23_samsung_tbdu18132_config = {
359 .demod_address = 0x0e,
362 static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
363 struct dvb_frontend_parameters *fep)
365 struct flexcop_device *fc = fe->dvb->priv;
372 #define FREQ_OFFSET 36125
374 div = ((fep->frequency/1000 + FREQ_OFFSET ) * 10) / REF_FREQ; // 4 MHz = 4000 KHz
376 buf[0] = (u8)( div >> 8) & 0x7f;
377 buf[1] = (u8) div & 0xff;
379 /* F(osc) = N * Reference Freq. (62.5 kHz)
380 * byte 2 : 0 N14 N13 N12 N11 N10 N9 N8
381 * byte 3 : N7 N6 N5 N4 N3 N2 N1 N0
382 * byte 4 : 1 * * AGD R3 R2 R1 R0
383 * byte 5 : C1 * RE RTS BS4 BS3 BS2 BS1
384 * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */
387 // Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5
388 // 47 - 153 0 * 0 0 0 0 0 1 0x01
389 // 153 - 430 0 * 0 0 0 0 1 0 0x02
390 // 430 - 822 0 * 0 0 1 0 0 0 0x08
391 // 822 - 862 1 * 0 0 1 0 0 0 0x88
393 if (fep->frequency <= 153000000) buf[3] = 0x01;
394 else if (fep->frequency <= 430000000) buf[3] = 0x02;
395 else if (fep->frequency <= 822000000) buf[3] = 0x08;
398 if (fe->ops.i2c_gate_ctrl)
399 fe->ops.i2c_gate_ctrl(fe, 0);
400 deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n",fep->frequency, buf[0],buf[1],buf[2],buf[3]);
401 ret = fc->i2c_request(&fc->fc_i2c_adap[2],
402 FC_WRITE, 0x61, buf[0], &buf[1], 3);
403 deb_tuner("tuner write returned: %d\n",ret);
408 static u8 alps_tdee4_stv0297_inittab[] = {
481 static struct stv0297_config alps_tdee4_stv0297_config = {
482 .demod_address = 0x1c,
483 .inittab = alps_tdee4_stv0297_inittab,
485 // .pll_set = alps_tdee4_stv0297_pll_set,
489 /* SkyStar2 rev2.7 (a/u) */
490 static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
491 .demod_address = 0x53,
493 .repeated_start_workaround = 1,
497 static struct itd1000_config skystar2_rev2_7_itd1000_config = {
501 /* SkyStar2 rev2.8 */
502 static struct cx24123_config skystar2_rev2_8_cx24123_config = {
503 .demod_address = 0x55,
505 .agc_callback = cx24113_agc_callback,
508 static const struct cx24113_config skystar2_rev2_8_cx24113_config = {
513 /* try to figure out the frontend, each card/box can have on of the following list */
514 int flexcop_frontend_init(struct flexcop_device *fc)
516 struct dvb_frontend_ops *ops;
517 struct i2c_adapter *i2c = &fc->fc_i2c_adap[0].i2c_adap;
518 struct i2c_adapter *i2c_tuner;
520 /* enable no_base_addr - no repeated start when reading */
521 fc->fc_i2c_adap[0].no_base_addr = 1;
522 fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, i2c);
523 if (fc->fe != NULL) {
524 flexcop_ibi_value r108;
525 i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe);
528 fc->fe_sleep = ops->sleep;
529 ops->sleep = flexcop_sleep;
531 fc->dev_type = FC_SKY_REV27;
533 /* enable no_base_addr - no repeated start when reading */
534 fc->fc_i2c_adap[2].no_base_addr = 1;
535 if (dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL)
536 err("ISL6421 could NOT be attached");
538 info("ISL6421 successfully attached");
540 /* the ITD1000 requires a lower i2c clock - it slows down the stuff for everyone - but is it a problem ? */
541 r108.raw = 0x00000506;
542 fc->write_ibi_reg(fc, tw_sm_c_108, r108);
544 if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner, &skystar2_rev2_7_itd1000_config) == NULL)
545 err("ITD1000 could NOT be attached");
547 info("ITD1000 successfully attached");
551 fc->fc_i2c_adap[0].no_base_addr = 0; /* for the next devices we need it again */
553 /* try the sky v2.8 (cx24123, isl6421) */
554 fc->fe = dvb_attach(cx24123_attach,
555 &skystar2_rev2_8_cx24123_config, i2c);
556 if (fc->fe != NULL) {
557 i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe);
558 if (i2c_tuner != NULL) {
559 if (dvb_attach(cx24113_attach, fc->fe,
560 &skystar2_rev2_8_cx24113_config,
562 err("CX24113 could NOT be attached");
564 info("CX24113 successfully attached");
567 fc->dev_type = FC_SKY_REV28;
569 fc->fc_i2c_adap[2].no_base_addr = 1;
570 if (dvb_attach(isl6421_attach, fc->fe,
571 &fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL)
572 err("ISL6421 could NOT be attached");
574 info("ISL6421 successfully attached");
576 /* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an
577 * IR-receiver (PIC16F818) - but the card has no input for
583 /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
584 fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
585 if (fc->fe != NULL) {
588 ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
590 ops->set_voltage = flexcop_set_voltage;
592 fc->fe_sleep = ops->sleep;
593 ops->sleep = flexcop_sleep;
595 fc->dev_type = FC_SKY;
599 /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
600 fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
601 if (fc->fe != NULL) {
602 fc->dev_type = FC_AIR_DVB;
603 fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
607 /* try the air atsc 2nd generation (nxt2002) */
608 fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c);
609 if (fc->fe != NULL) {
610 fc->dev_type = FC_AIR_ATSC2;
611 dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, DVB_PLL_SAMSUNG_TBMV);
615 fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c);
616 if (fc->fe != NULL) {
617 fc->dev_type = FC_AIR_ATSC3;
618 dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
619 TUNER_LG_TDVS_H06XF);
623 /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
624 fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
625 if (fc->fe != NULL) {
626 fc->dev_type = FC_AIR_ATSC1;
630 /* try the cable dvb (stv0297) */
631 fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
632 if (fc->fe != NULL) {
633 fc->dev_type = FC_CABLE;
634 fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
638 /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
639 fc->fe = dvb_attach(mt312_attach,
640 &skystar23_samsung_tbdu18132_config, i2c);
641 if (fc->fe != NULL) {
644 ops->tuner_ops.set_params = skystar23_samsung_tbdu18132_tuner_set_params;
646 ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
647 ops->diseqc_send_burst = flexcop_diseqc_send_burst;
648 ops->set_tone = flexcop_set_tone;
649 ops->set_voltage = flexcop_set_voltage;
651 fc->fe_sleep = ops->sleep;
652 ops->sleep = flexcop_sleep;
654 fc->dev_type = FC_SKY_OLD;
658 err("no frontend driver found for this B2C2/FlexCop adapter");
662 info("found '%s' .", fc->fe->ops.info.name);
663 if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
664 err("frontend registration failed!");
666 if (ops->release != NULL)
667 ops->release(fc->fe);
671 fc->init_state |= FC_STATE_FE_INIT;
675 void flexcop_frontend_exit(struct flexcop_device *fc)
677 if (fc->init_state & FC_STATE_FE_INIT) {
678 dvb_unregister_frontend(fc->fe);
679 dvb_frontend_detach(fc->fe);
682 fc->init_state &= ~FC_STATE_FE_INIT;