Merge git://oss.sgi.com:8090/oss/git/xfs-2.6
[linux-2.6] / drivers / net / gianfar_phy.c
1 /* 
2  * drivers/net/gianfar_phy.c
3  *
4  * Gianfar Ethernet Driver -- PHY handling
5  * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
6  * Based on 8260_io/fcc_enet.c
7  *
8  * Author: Andy Fleming
9  * Maintainer: Kumar Gala (kumar.gala@freescale.com)
10  *
11  * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
12  *
13  * This program is free software; you can redistribute  it and/or modify it
14  * under  the terms of  the GNU General  Public License as published by the
15  * Free Software Foundation;  either version 2 of the  License, or (at your
16  * option) any later version.
17  *
18  */
19
20 #include <linux/config.h>
21 #include <linux/kernel.h>
22 #include <linux/sched.h>
23 #include <linux/string.h>
24 #include <linux/errno.h>
25 #include <linux/slab.h>
26 #include <linux/interrupt.h>
27 #include <linux/init.h>
28 #include <linux/delay.h>
29 #include <linux/netdevice.h>
30 #include <linux/etherdevice.h>
31 #include <linux/skbuff.h>
32 #include <linux/spinlock.h>
33 #include <linux/mm.h>
34
35 #include <asm/io.h>
36 #include <asm/irq.h>
37 #include <asm/uaccess.h>
38 #include <linux/module.h>
39 #include <linux/version.h>
40 #include <linux/crc32.h>
41 #include <linux/mii.h>
42
43 #include "gianfar.h"
44 #include "gianfar_phy.h"
45
46 static void config_genmii_advert(struct gfar_mii_info *mii_info);
47 static void genmii_setup_forced(struct gfar_mii_info *mii_info);
48 static void genmii_restart_aneg(struct gfar_mii_info *mii_info);
49 static int gbit_config_aneg(struct gfar_mii_info *mii_info);
50 static int genmii_config_aneg(struct gfar_mii_info *mii_info);
51 static int genmii_update_link(struct gfar_mii_info *mii_info);
52 static int genmii_read_status(struct gfar_mii_info *mii_info);
53 u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum);
54 void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val);
55
56 /* Write value to the PHY for this device to the register at regnum, */
57 /* waiting until the write is done before it returns.  All PHY */
58 /* configuration has to be done through the TSEC1 MIIM regs */
59 void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value)
60 {
61         struct gfar_private *priv = netdev_priv(dev);
62         struct gfar *regbase = priv->phyregs;
63
64         /* Set the PHY address and the register address we want to write */
65         gfar_write(&regbase->miimadd, (mii_id << 8) | regnum);
66
67         /* Write out the value we want */
68         gfar_write(&regbase->miimcon, value);
69
70         /* Wait for the transaction to finish */
71         while (gfar_read(&regbase->miimind) & MIIMIND_BUSY)
72                 cpu_relax();
73 }
74
75 /* Reads from register regnum in the PHY for device dev, */
76 /* returning the value.  Clears miimcom first.  All PHY */
77 /* configuration has to be done through the TSEC1 MIIM regs */
78 int read_phy_reg(struct net_device *dev, int mii_id, int regnum)
79 {
80         struct gfar_private *priv = netdev_priv(dev);
81         struct gfar *regbase = priv->phyregs;
82         u16 value;
83
84         /* Set the PHY address and the register address we want to read */
85         gfar_write(&regbase->miimadd, (mii_id << 8) | regnum);
86
87         /* Clear miimcom, and then initiate a read */
88         gfar_write(&regbase->miimcom, 0);
89         gfar_write(&regbase->miimcom, MII_READ_COMMAND);
90
91         /* Wait for the transaction to finish */
92         while (gfar_read(&regbase->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
93                 cpu_relax();
94
95         /* Grab the value of the register from miimstat */
96         value = gfar_read(&regbase->miimstat);
97
98         return value;
99 }
100
101 void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info)
102 {
103         if(mii_info->phyinfo->ack_interrupt)
104                 mii_info->phyinfo->ack_interrupt(mii_info);
105 }
106
107
108 void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts)
109 {
110         mii_info->interrupts = interrupts;
111         if(mii_info->phyinfo->config_intr)
112                 mii_info->phyinfo->config_intr(mii_info);
113 }
114
115
116 /* Writes MII_ADVERTISE with the appropriate values, after
117  * sanitizing advertise to make sure only supported features
118  * are advertised 
119  */
120 static void config_genmii_advert(struct gfar_mii_info *mii_info)
121 {
122         u32 advertise;
123         u16 adv;
124
125         /* Only allow advertising what this PHY supports */
126         mii_info->advertising &= mii_info->phyinfo->features;
127         advertise = mii_info->advertising;
128
129         /* Setup standard advertisement */
130         adv = phy_read(mii_info, MII_ADVERTISE);
131         adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
132         if (advertise & ADVERTISED_10baseT_Half)
133                 adv |= ADVERTISE_10HALF;
134         if (advertise & ADVERTISED_10baseT_Full)
135                 adv |= ADVERTISE_10FULL;
136         if (advertise & ADVERTISED_100baseT_Half)
137                 adv |= ADVERTISE_100HALF;
138         if (advertise & ADVERTISED_100baseT_Full)
139                 adv |= ADVERTISE_100FULL;
140         phy_write(mii_info, MII_ADVERTISE, adv);
141 }
142
143 static void genmii_setup_forced(struct gfar_mii_info *mii_info)
144 {
145         u16 ctrl;
146         u32 features = mii_info->phyinfo->features;
147         
148         ctrl = phy_read(mii_info, MII_BMCR);
149
150         ctrl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPEED1000|BMCR_ANENABLE);
151         ctrl |= BMCR_RESET;
152
153         switch(mii_info->speed) {
154                 case SPEED_1000:
155                         if(features & (SUPPORTED_1000baseT_Half
156                                                 | SUPPORTED_1000baseT_Full)) {
157                                 ctrl |= BMCR_SPEED1000;
158                                 break;
159                         }
160                         mii_info->speed = SPEED_100;
161                 case SPEED_100:
162                         if (features & (SUPPORTED_100baseT_Half
163                                                 | SUPPORTED_100baseT_Full)) {
164                                 ctrl |= BMCR_SPEED100;
165                                 break;
166                         }
167                         mii_info->speed = SPEED_10;
168                 case SPEED_10:
169                         if (features & (SUPPORTED_10baseT_Half
170                                                 | SUPPORTED_10baseT_Full))
171                                 break;
172                 default: /* Unsupported speed! */
173                         printk(KERN_ERR "%s: Bad speed!\n", 
174                                         mii_info->dev->name);
175                         break;
176         }
177
178         phy_write(mii_info, MII_BMCR, ctrl);
179 }
180
181
182 /* Enable and Restart Autonegotiation */
183 static void genmii_restart_aneg(struct gfar_mii_info *mii_info)
184 {
185         u16 ctl;
186
187         ctl = phy_read(mii_info, MII_BMCR);
188         ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
189         phy_write(mii_info, MII_BMCR, ctl);
190 }
191
192
193 static int gbit_config_aneg(struct gfar_mii_info *mii_info)
194 {
195         u16 adv;
196         u32 advertise;
197
198         if(mii_info->autoneg) {
199                 /* Configure the ADVERTISE register */
200                 config_genmii_advert(mii_info);
201                 advertise = mii_info->advertising;
202
203                 adv = phy_read(mii_info, MII_1000BASETCONTROL);
204                 adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
205                                 MII_1000BASETCONTROL_HALFDUPLEXCAP);
206                 if (advertise & SUPPORTED_1000baseT_Half)
207                         adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
208                 if (advertise & SUPPORTED_1000baseT_Full)
209                         adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
210                 phy_write(mii_info, MII_1000BASETCONTROL, adv);
211
212                 /* Start/Restart aneg */
213                 genmii_restart_aneg(mii_info);
214         } else
215                 genmii_setup_forced(mii_info);
216
217         return 0;
218 }
219
220 static int marvell_config_aneg(struct gfar_mii_info *mii_info)
221 {
222         /* The Marvell PHY has an errata which requires
223          * that certain registers get written in order
224          * to restart autonegotiation */
225         phy_write(mii_info, MII_BMCR, BMCR_RESET);
226
227         phy_write(mii_info, 0x1d, 0x1f);
228         phy_write(mii_info, 0x1e, 0x200c);
229         phy_write(mii_info, 0x1d, 0x5);
230         phy_write(mii_info, 0x1e, 0);
231         phy_write(mii_info, 0x1e, 0x100);
232
233         gbit_config_aneg(mii_info);
234
235         return 0;
236 }
237 static int genmii_config_aneg(struct gfar_mii_info *mii_info)
238 {
239         if (mii_info->autoneg) {
240                 config_genmii_advert(mii_info);
241                 genmii_restart_aneg(mii_info);
242         } else
243                 genmii_setup_forced(mii_info);
244
245         return 0;
246 }
247
248
249 static int genmii_update_link(struct gfar_mii_info *mii_info)
250 {
251         u16 status;
252
253         /* Do a fake read */
254         phy_read(mii_info, MII_BMSR);
255
256         /* Read link and autonegotiation status */
257         status = phy_read(mii_info, MII_BMSR);
258         if ((status & BMSR_LSTATUS) == 0)
259                 mii_info->link = 0;
260         else
261                 mii_info->link = 1;
262
263         /* If we are autonegotiating, and not done, 
264          * return an error */
265         if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE))
266                 return -EAGAIN;
267
268         return 0;
269 }
270
271 static int genmii_read_status(struct gfar_mii_info *mii_info)
272 {
273         u16 status;
274         int err;
275
276         /* Update the link, but return if there
277          * was an error */
278         err = genmii_update_link(mii_info);
279         if (err)
280                 return err;
281
282         if (mii_info->autoneg) {
283                 status = phy_read(mii_info, MII_LPA);
284
285                 if (status & (LPA_10FULL | LPA_100FULL))
286                         mii_info->duplex = DUPLEX_FULL;
287                 else
288                         mii_info->duplex = DUPLEX_HALF;
289                 if (status & (LPA_100FULL | LPA_100HALF))
290                         mii_info->speed = SPEED_100;
291                 else
292                         mii_info->speed = SPEED_10;
293                 mii_info->pause = 0;
294         }
295         /* On non-aneg, we assume what we put in BMCR is the speed,
296          * though magic-aneg shouldn't prevent this case from occurring
297          */
298
299         return 0;
300 }
301 static int marvell_read_status(struct gfar_mii_info *mii_info)
302 {
303         u16 status;
304         int err;
305
306         /* Update the link, but return if there
307          * was an error */
308         err = genmii_update_link(mii_info);
309         if (err)
310                 return err;
311
312         /* If the link is up, read the speed and duplex */
313         /* If we aren't autonegotiating, assume speeds 
314          * are as set */
315         if (mii_info->autoneg && mii_info->link) {
316                 int speed;
317                 status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
318
319 #if 0
320                 /* If speed and duplex aren't resolved,
321                  * return an error.  Isn't this handled
322                  * by checking aneg?
323                  */
324                 if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0)
325                         return -EAGAIN;
326 #endif
327
328                 /* Get the duplexity */
329                 if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
330                         mii_info->duplex = DUPLEX_FULL;
331                 else
332                         mii_info->duplex = DUPLEX_HALF;
333
334                 /* Get the speed */
335                 speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK;
336                 switch(speed) {
337                         case MII_M1011_PHY_SPEC_STATUS_1000:
338                                 mii_info->speed = SPEED_1000;
339                                 break;
340                         case MII_M1011_PHY_SPEC_STATUS_100:
341                                 mii_info->speed = SPEED_100;
342                                 break;
343                         default:
344                                 mii_info->speed = SPEED_10;
345                                 break;
346                 }
347                 mii_info->pause = 0;
348         }
349
350         return 0;
351 }
352
353
354 static int cis820x_read_status(struct gfar_mii_info *mii_info)
355 {
356         u16 status;
357         int err;
358
359         /* Update the link, but return if there
360          * was an error */
361         err = genmii_update_link(mii_info);
362         if (err)
363                 return err;
364
365         /* If the link is up, read the speed and duplex */
366         /* If we aren't autonegotiating, assume speeds 
367          * are as set */
368         if (mii_info->autoneg && mii_info->link) {
369                 int speed;
370
371                 status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT);
372                 if (status & MII_CIS8201_AUXCONSTAT_DUPLEX)
373                         mii_info->duplex = DUPLEX_FULL;
374                 else
375                         mii_info->duplex = DUPLEX_HALF;
376
377                 speed = status & MII_CIS8201_AUXCONSTAT_SPEED;
378
379                 switch (speed) {
380                 case MII_CIS8201_AUXCONSTAT_GBIT:
381                         mii_info->speed = SPEED_1000;
382                         break;
383                 case MII_CIS8201_AUXCONSTAT_100:
384                         mii_info->speed = SPEED_100;
385                         break;
386                 default:
387                         mii_info->speed = SPEED_10;
388                         break;
389                 }
390         }
391
392         return 0;
393 }
394
395 static int marvell_ack_interrupt(struct gfar_mii_info *mii_info)
396 {
397         /* Clear the interrupts by reading the reg */
398         phy_read(mii_info, MII_M1011_IEVENT);
399
400         return 0;
401 }
402
403 static int marvell_config_intr(struct gfar_mii_info *mii_info)
404 {
405         if(mii_info->interrupts == MII_INTERRUPT_ENABLED)
406                 phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
407         else
408                 phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
409
410         return 0;
411 }
412
413 static int cis820x_init(struct gfar_mii_info *mii_info)
414 {
415         phy_write(mii_info, MII_CIS8201_AUX_CONSTAT, 
416                         MII_CIS8201_AUXCONSTAT_INIT);
417         phy_write(mii_info, MII_CIS8201_EXT_CON1,
418                         MII_CIS8201_EXTCON1_INIT);
419
420         return 0;
421 }
422
423 static int cis820x_ack_interrupt(struct gfar_mii_info *mii_info)
424 {
425         phy_read(mii_info, MII_CIS8201_ISTAT);
426
427         return 0;
428 }
429
430 static int cis820x_config_intr(struct gfar_mii_info *mii_info)
431 {
432         if(mii_info->interrupts == MII_INTERRUPT_ENABLED)
433                 phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK);
434         else
435                 phy_write(mii_info, MII_CIS8201_IMASK, 0);
436
437         return 0;
438 }
439
440 #define DM9161_DELAY 10
441
442 static int dm9161_read_status(struct gfar_mii_info *mii_info)
443 {
444         u16 status;
445         int err;
446
447         /* Update the link, but return if there
448          * was an error */
449         err = genmii_update_link(mii_info);
450         if (err)
451                 return err;
452
453         /* If the link is up, read the speed and duplex */
454         /* If we aren't autonegotiating, assume speeds 
455          * are as set */
456         if (mii_info->autoneg && mii_info->link) {
457                 status = phy_read(mii_info, MII_DM9161_SCSR);
458                 if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
459                         mii_info->speed = SPEED_100;
460                 else
461                         mii_info->speed = SPEED_10;
462
463                 if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F))
464                         mii_info->duplex = DUPLEX_FULL;
465                 else
466                         mii_info->duplex = DUPLEX_HALF;
467         }
468
469         return 0;
470 }
471
472
473 static int dm9161_config_aneg(struct gfar_mii_info *mii_info)
474 {
475         struct dm9161_private *priv = mii_info->priv;
476
477         if(0 == priv->resetdone)
478                 return -EAGAIN;
479
480         return 0;
481 }
482
483 static void dm9161_timer(unsigned long data)
484 {
485         struct gfar_mii_info *mii_info = (struct gfar_mii_info *)data;
486         struct dm9161_private *priv = mii_info->priv;
487         u16 status = phy_read(mii_info, MII_BMSR);
488
489         if (status & BMSR_ANEGCOMPLETE) {
490                 priv->resetdone = 1;
491         } else
492                 mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
493 }
494
495 static int dm9161_init(struct gfar_mii_info *mii_info)
496 {
497         struct dm9161_private *priv;
498
499         /* Allocate the private data structure */
500         priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL);
501
502         if (NULL == priv)
503                 return -ENOMEM;
504
505         mii_info->priv = priv;
506
507         /* Reset is not done yet */
508         priv->resetdone = 0;
509
510         /* Isolate the PHY */
511         phy_write(mii_info, MII_BMCR, BMCR_ISOLATE);
512
513         /* Do not bypass the scrambler/descrambler */
514         phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
515
516         /* Clear 10BTCSR to default */
517         phy_write(mii_info, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT);
518
519         /* Reconnect the PHY, and enable Autonegotiation */
520         phy_write(mii_info, MII_BMCR, BMCR_ANENABLE);
521
522         /* Start a timer for DM9161_DELAY seconds to wait
523          * for the PHY to be ready */
524         init_timer(&priv->timer);
525         priv->timer.function = &dm9161_timer;
526         priv->timer.data = (unsigned long) mii_info;
527         mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
528
529         return 0;
530 }
531
532 static void dm9161_close(struct gfar_mii_info *mii_info)
533 {
534         struct dm9161_private *priv = mii_info->priv;
535
536         del_timer_sync(&priv->timer);
537         kfree(priv);
538 }
539
540 #if 0
541 static int dm9161_ack_interrupt(struct gfar_mii_info *mii_info)
542 {
543         phy_read(mii_info, MII_DM9161_INTR);
544
545         return 0;
546 }
547 #endif
548
549 /* Cicada 820x */
550 static struct phy_info phy_info_cis820x = {
551         0x000fc440,
552         "Cicada Cis8204",
553         0x000fffc0,
554         .features       = MII_GBIT_FEATURES,
555         .init           = &cis820x_init,
556         .config_aneg    = &gbit_config_aneg,
557         .read_status    = &cis820x_read_status,
558         .ack_interrupt  = &cis820x_ack_interrupt,
559         .config_intr    = &cis820x_config_intr,
560 };
561
562 static struct phy_info phy_info_dm9161 = {
563         .phy_id         = 0x0181b880,
564         .name           = "Davicom DM9161E",
565         .phy_id_mask    = 0x0ffffff0,
566         .init           = dm9161_init,
567         .config_aneg    = dm9161_config_aneg,
568         .read_status    = dm9161_read_status,
569         .close          = dm9161_close,
570 };
571
572 static struct phy_info phy_info_marvell = {
573         .phy_id         = 0x01410c00,
574         .phy_id_mask    = 0xffffff00,
575         .name           = "Marvell 88E1101/88E1111",
576         .features       = MII_GBIT_FEATURES,
577         .config_aneg    = &marvell_config_aneg,
578         .read_status    = &marvell_read_status,
579         .ack_interrupt  = &marvell_ack_interrupt,
580         .config_intr    = &marvell_config_intr,
581 };
582
583 static struct phy_info phy_info_genmii= {
584         .phy_id         = 0x00000000,
585         .phy_id_mask    = 0x00000000,
586         .name           = "Generic MII",
587         .features       = MII_BASIC_FEATURES,
588         .config_aneg    = genmii_config_aneg,
589         .read_status    = genmii_read_status,
590 };
591
592 static struct phy_info *phy_info[] = {
593         &phy_info_cis820x,
594         &phy_info_marvell,
595         &phy_info_dm9161,
596         &phy_info_genmii,
597         NULL
598 };
599
600 u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum)
601 {
602         u16 retval;
603         unsigned long flags;
604
605         spin_lock_irqsave(&mii_info->mdio_lock, flags);
606         retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum);
607         spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
608
609         return retval;
610 }
611
612 void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val)
613 {
614         unsigned long flags;
615
616         spin_lock_irqsave(&mii_info->mdio_lock, flags);
617         mii_info->mdio_write(mii_info->dev, 
618                         mii_info->mii_id, 
619                         regnum, val);
620         spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
621 }
622
623 /* Use the PHY ID registers to determine what type of PHY is attached
624  * to device dev.  return a struct phy_info structure describing that PHY
625  */
626 struct phy_info * get_phy_info(struct gfar_mii_info *mii_info)
627 {
628         u16 phy_reg;
629         u32 phy_ID;
630         int i;
631         struct phy_info *theInfo = NULL;
632         struct net_device *dev = mii_info->dev;
633
634         /* Grab the bits from PHYIR1, and put them in the upper half */
635         phy_reg = phy_read(mii_info, MII_PHYSID1);
636         phy_ID = (phy_reg & 0xffff) << 16;
637
638         /* Grab the bits from PHYIR2, and put them in the lower half */
639         phy_reg = phy_read(mii_info, MII_PHYSID2);
640         phy_ID |= (phy_reg & 0xffff);
641
642         /* loop through all the known PHY types, and find one that */
643         /* matches the ID we read from the PHY. */
644         for (i = 0; phy_info[i]; i++)
645                 if (phy_info[i]->phy_id == 
646                                 (phy_ID & phy_info[i]->phy_id_mask)) {
647                         theInfo = phy_info[i];
648                         break;
649                 }
650
651         /* This shouldn't happen, as we have generic PHY support */
652         if (theInfo == NULL) {
653                 printk("%s: PHY id %x is not supported!\n", dev->name, phy_ID);
654                 return NULL;
655         } else {
656                 printk("%s: PHY is %s (%x)\n", dev->name, theInfo->name,
657                        phy_ID);
658         }
659
660         return theInfo;
661 }