2 * Copyright (C) 2000-2003 Axis Communications AB
4 * Authors: Bjorn Wesen (bjornw@axis.com)
5 * Mikael Starvik (starvik@axis.com)
6 * Tobias Anderberg (tobiasa@axis.com), CRISv32 port.
8 * This file handles the architecture-dependent parts of process handling..
11 #include <linux/config.h>
12 #include <linux/sched.h>
13 #include <linux/err.h>
15 #include <linux/slab.h>
16 #include <asm/arch/hwregs/reg_rdwr.h>
17 #include <asm/arch/hwregs/reg_map.h>
18 #include <asm/arch/hwregs/timer_defs.h>
19 #include <asm/arch/hwregs/intr_vect_defs.h>
21 extern void stop_watchdog(void);
23 #ifdef CONFIG_ETRAX_GPIO
24 extern void etrax_gpio_wake_up_check(void); /* Defined in drivers/gpio.c. */
27 extern int cris_hlt_counter;
29 /* We use this if we don't have any better idle routine. */
30 void default_idle(void)
33 if (!need_resched() && !cris_hlt_counter) {
34 /* Halt until exception. */
35 __asm__ volatile("ei \n\t"
42 * Free current thread data structures etc..
45 extern void deconfigure_bp(long pid);
46 void exit_thread(void)
48 deconfigure_bp(current->pid);
52 * If the watchdog is enabled, disable interrupts and enter an infinite loop.
53 * The watchdog will reset the CPU after 0.1s. If the watchdog isn't enabled
54 * then enable it and wait.
56 extern void arch_enable_nmi(void);
62 * Don't declare this variable elsewhere. We don't want any other
63 * code to know about it than the watchdog handler in entry.S and
64 * this code, implementing hard reset through the watchdog.
66 #if defined(CONFIG_ETRAX_WATCHDOG)
67 extern int cause_of_death;
70 printk("*** HARD RESET ***\n");
73 #if defined(CONFIG_ETRAX_WATCHDOG)
74 cause_of_death = 0xbedead;
77 reg_timer_rw_wd_ctrl wd_ctrl = {0};
81 wd_ctrl.key = 16; /* Arbitrary key. */
82 wd_ctrl.cnt = 1; /* Minimum time. */
83 wd_ctrl.cmd = regk_timer_start;
86 REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl);
91 ; /* Wait for reset. */
95 * Return saved PC of a blocked thread.
97 unsigned long thread_saved_pc(struct task_struct *t)
99 return (unsigned long)user_regs(t->thread_info)->erp;
103 kernel_thread_helper(void* dummy, int (*fn)(void *), void * arg)
106 do_exit(-1); /* Should never be called, return bad exit value. */
109 /* Create a kernel thread. */
111 kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
115 memset(®s, 0, sizeof(regs));
117 /* Don't use r10 since that is set to 0 in copy_thread. */
118 regs.r11 = (unsigned long) fn;
119 regs.r12 = (unsigned long) arg;
120 regs.erp = (unsigned long) kernel_thread_helper;
121 regs.ccs = 1 << (I_CCS_BITNR + CCS_SHIFT);
123 /* Create the new process. */
124 return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL);
128 * Setup the child's kernel stack with a pt_regs and call switch_stack() on it.
129 * It will be unnested during _resume and _ret_from_sys_call when the new thread
132 * Also setup the thread switching structure which is used to keep
133 * thread-specific data during _resumes.
136 extern asmlinkage void ret_from_fork(void);
139 copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
140 unsigned long unused,
141 struct task_struct *p, struct pt_regs *regs)
143 struct pt_regs *childregs;
144 struct switch_stack *swstack;
147 * Put the pt_regs structure at the end of the new kernel stack page and
148 * fix it up. Note: the task_struct doubles as the kernel stack for the
151 childregs = user_regs(p->thread_info);
152 *childregs = *regs; /* Struct copy of pt_regs. */
153 p->set_child_tid = p->clear_child_tid = NULL;
154 childregs->r10 = 0; /* Child returns 0 after a fork/clone. */
157 * The TLS is in $mof beacuse it is the 5th argument to sys_clone.
159 if (p->mm && (clone_flags & CLONE_SETTLS)) {
160 p->thread_info->tls = regs->mof;
163 /* Put the switch stack right below the pt_regs. */
164 swstack = ((struct switch_stack *) childregs) - 1;
166 /* Paramater to ret_from_sys_call. 0 is don't restart the syscall. */
170 * We want to return into ret_from_sys_call after the _resume.
171 * ret_from_fork will call ret_from_sys_call.
173 swstack->return_ip = (unsigned long) ret_from_fork;
175 /* Fix the user-mode and kernel-mode stackpointer. */
177 p->thread.ksp = (unsigned long) swstack;
183 * Be aware of the "magic" 7th argument in the four system-calls below.
184 * They need the latest stackframe, which is put as the 7th argument by
185 * entry.S. The previous arguments are dummies or actually used, but need
186 * to be defined to reach the 7th argument.
188 * N.B.: Another method to get the stackframe is to use current_regs(). But
189 * it returns the latest stack-frame stacked when going from _user mode_ and
190 * some of these (at least sys_clone) are called from kernel-mode sometimes
191 * (for example during kernel_thread, above) and thus cannot use it. Thus,
192 * to be sure not to get any surprises, we use the method for the other calls
196 sys_fork(long r10, long r11, long r12, long r13, long mof, long srp,
197 struct pt_regs *regs)
199 return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL);
202 /* FIXME: Is parent_tid/child_tid really third/fourth argument? Update lib? */
204 sys_clone(unsigned long newusp, unsigned long flags, int *parent_tid, int *child_tid,
205 unsigned long tls, long srp, struct pt_regs *regs)
210 return do_fork(flags, newusp, regs, 0, parent_tid, child_tid);
214 * vfork is a system call in i386 because of register-pressure - maybe
215 * we can remove it and handle it in libc but we put it here until then.
218 sys_vfork(long r10, long r11, long r12, long r13, long mof, long srp,
219 struct pt_regs *regs)
221 return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, NULL);
224 /* sys_execve() executes a new program. */
226 sys_execve(const char *fname, char **argv, char **envp, long r13, long mof, long srp,
227 struct pt_regs *regs)
232 filename = getname(fname);
233 error = PTR_ERR(filename);
235 if (IS_ERR(filename))
238 error = do_execve(filename, argv, envp, regs);
245 get_wchan(struct task_struct *p)
253 void show_regs(struct pt_regs * regs)
255 unsigned long usp = rdusp();
256 printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n",
257 regs->erp, regs->srp, regs->ccs, usp, regs->mof);
259 printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
260 regs->r0, regs->r1, regs->r2, regs->r3);
262 printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
263 regs->r4, regs->r5, regs->r6, regs->r7);
265 printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
266 regs->r8, regs->r9, regs->r10, regs->r11);
268 printk("r12: %08lx r13: %08lx oR10: %08lx\n",
269 regs->r12, regs->r13, regs->orig_r10);