1 /****************************************************************************
2 * Driver for Solarflare Solarstorm network controllers and boards
3 * Copyright 2006-2008 Solarflare Communications Inc.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 as published
7 * by the Free Software Foundation, incorporated herein by reference.
10 #ifndef EFX_MDIO_10G_H
11 #define EFX_MDIO_10G_H
14 * Definitions needed for doing 10G MDIO as specified in clause 45
15 * MDIO, which do not appear in Linux yet. Also some helper functions.
21 /* Numbering of the MDIO Manageable Devices (MMDs) */
22 /* Physical Medium Attachment/ Physical Medium Dependent sublayer */
23 #define MDIO_MMD_PMAPMD (1)
24 /* WAN Interface Sublayer */
25 #define MDIO_MMD_WIS (2)
26 /* Physical Coding Sublayer */
27 #define MDIO_MMD_PCS (3)
28 /* PHY Extender Sublayer */
29 #define MDIO_MMD_PHYXS (4)
30 /* Extender Sublayer */
31 #define MDIO_MMD_DTEXS (5)
32 /* Transmission convergence */
33 #define MDIO_MMD_TC (6)
34 /* Auto negotiation */
35 #define MDIO_MMD_AN (7)
36 /* Clause 22 extension */
37 #define MDIO_MMD_C22EXT 29
39 /* Generic register locations */
40 #define MDIO_MMDREG_CTRL1 (0)
41 #define MDIO_MMDREG_STAT1 (1)
42 #define MDIO_MMDREG_IDHI (2)
43 #define MDIO_MMDREG_IDLOW (3)
44 #define MDIO_MMDREG_SPEED (4)
45 #define MDIO_MMDREG_DEVS0 (5)
46 #define MDIO_MMDREG_DEVS1 (6)
47 #define MDIO_MMDREG_CTRL2 (7)
48 #define MDIO_MMDREG_STAT2 (8)
49 #define MDIO_MMDREG_TXDIS (9)
51 /* Bits in MMDREG_CTRL1 */
53 #define MDIO_MMDREG_CTRL1_RESET_LBN (15)
54 #define MDIO_MMDREG_CTRL1_RESET_WIDTH (1)
56 /* Loopback bit for WIS, PCS, PHYSX and DTEXS */
57 #define MDIO_MMDREG_CTRL1_LBACK_LBN (14)
58 #define MDIO_MMDREG_CTRL1_LBACK_WIDTH (1)
60 #define MDIO_MMDREG_CTRL1_LPOWER_LBN (11)
61 #define MDIO_MMDREG_CTRL1_LPOWER_WIDTH (1)
63 /* Bits in MMDREG_STAT1 */
64 #define MDIO_MMDREG_STAT1_FAULT_LBN (7)
65 #define MDIO_MMDREG_STAT1_FAULT_WIDTH (1)
67 #define MDIO_MMDREG_STAT1_LINK_LBN (2)
68 #define MDIO_MMDREG_STAT1_LINK_WIDTH (1)
69 /* Low power ability */
70 #define MDIO_MMDREG_STAT1_LPABLE_LBN (1)
71 #define MDIO_MMDREG_STAT1_LPABLE_WIDTH (1)
73 /* Bits in combined ID regs */
74 static inline unsigned mdio_id_rev(u32 id) { return id & 0xf; }
75 static inline unsigned mdio_id_model(u32 id) { return (id >> 4) & 0x3f; }
76 extern unsigned mdio_id_oui(u32 id);
78 /* Bits in MMDREG_DEVS0/1. Someone thoughtfully layed things out
79 * so the 'bit present' bit number of an MMD is the number of
81 #define DEV_PRESENT_BIT(_b) (1 << _b)
83 #define MDIO_MMDREG_DEVS_PHYXS DEV_PRESENT_BIT(MDIO_MMD_PHYXS)
84 #define MDIO_MMDREG_DEVS_PCS DEV_PRESENT_BIT(MDIO_MMD_PCS)
85 #define MDIO_MMDREG_DEVS_PMAPMD DEV_PRESENT_BIT(MDIO_MMD_PMAPMD)
86 #define MDIO_MMDREG_DEVS_AN DEV_PRESENT_BIT(MDIO_MMD_AN)
87 #define MDIO_MMDREG_DEVS_C22EXT DEV_PRESENT_BIT(MDIO_MMD_C22EXT)
89 /* Bits in MMDREG_SPEED */
90 #define MDIO_MMDREG_SPEED_10G_LBN 0
91 #define MDIO_MMDREG_SPEED_10G_WIDTH 1
92 #define MDIO_MMDREG_SPEED_1000M_LBN 4
93 #define MDIO_MMDREG_SPEED_1000M_WIDTH 1
94 #define MDIO_MMDREG_SPEED_100M_LBN 5
95 #define MDIO_MMDREG_SPEED_100M_WIDTH 1
96 #define MDIO_MMDREG_SPEED_10M_LBN 6
97 #define MDIO_MMDREG_SPEED_10M_WIDTH 1
99 /* Bits in MMDREG_STAT2 */
100 #define MDIO_MMDREG_STAT2_PRESENT_VAL (2)
101 #define MDIO_MMDREG_STAT2_PRESENT_LBN (14)
102 #define MDIO_MMDREG_STAT2_PRESENT_WIDTH (2)
104 /* Bits in MMDREG_TXDIS */
105 #define MDIO_MMDREG_TXDIS_GLOBAL_LBN (0)
106 #define MDIO_MMDREG_TXDIS_GLOBAL_WIDTH (1)
108 /* MMD-specific bits, ordered by MMD, then register */
109 #define MDIO_PMAPMD_CTRL1_LBACK_LBN (0)
110 #define MDIO_PMAPMD_CTRL1_LBACK_WIDTH (1)
112 /* PMA type (4 bits) */
113 #define MDIO_PMAPMD_CTRL2_10G_CX4 (0x0)
114 #define MDIO_PMAPMD_CTRL2_10G_EW (0x1)
115 #define MDIO_PMAPMD_CTRL2_10G_LW (0x2)
116 #define MDIO_PMAPMD_CTRL2_10G_SW (0x3)
117 #define MDIO_PMAPMD_CTRL2_10G_LX4 (0x4)
118 #define MDIO_PMAPMD_CTRL2_10G_ER (0x5)
119 #define MDIO_PMAPMD_CTRL2_10G_LR (0x6)
120 #define MDIO_PMAPMD_CTRL2_10G_SR (0x7)
122 #define MDIO_PMAPMD_CTRL2_10G_BT (0x9)
125 #define MDIO_PMAPMD_CTRL2_1G_BT (0xc)
127 #define MDIO_PMAPMD_CTRL2_100_BT (0xe)
128 #define MDIO_PMAPMD_CTRL2_10_BT (0xf)
129 #define MDIO_PMAPMD_CTRL2_TYPE_MASK (0xf)
131 /* PMA 10GBT registers */
132 #define MDIO_PMAPMD_10GBT_TXPWR (131)
133 #define MDIO_PMAPMD_10GBT_TXPWR_SHORT_LBN (0)
134 #define MDIO_PMAPMD_10GBT_TXPWR_SHORT_WIDTH (1)
136 /* PHY XGXS Status 2 */
137 #define MDIO_PHYXS_STATUS2 (8)
138 #define MDIO_PHYXS_STATUS2_RX_FAULT_LBN 10
140 /* PHY XGXS lane state */
141 #define MDIO_PHYXS_LANE_STATE (0x18)
142 #define MDIO_PHYXS_LANE_ALIGNED_LBN (12)
145 #define MDIO_AN_CTRL_XNP_LBN 13
146 #define MDIO_AN_STATUS (1)
147 #define MDIO_AN_STATUS_XNP_LBN (7)
148 #define MDIO_AN_STATUS_PAGE_LBN (6)
149 #define MDIO_AN_STATUS_AN_DONE_LBN (5)
150 #define MDIO_AN_STATUS_LP_AN_CAP_LBN (0)
152 #define MDIO_AN_ADVERTISE 16
153 #define MDIO_AN_ADVERTISE_XNP_LBN 12
154 #define MDIO_AN_LPA 19
155 #define MDIO_AN_XNP 22
156 #define MDIO_AN_LPA_XNP 25
158 #define MDIO_AN_10GBT_CTRL 32
159 #define MDIO_AN_10GBT_CTRL_ADV_10G_LBN 12
160 #define MDIO_AN_10GBT_STATUS (33)
161 #define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */
162 #define MDIO_AN_10GBT_STATUS_MS_LBN (14) /* MASTER/SLAVE config */
163 #define MDIO_AN_10GBT_STATUS_LOC_OK_LBN (13) /* Local OK */
164 #define MDIO_AN_10GBT_STATUS_REM_OK_LBN (12) /* Remote OK */
165 #define MDIO_AN_10GBT_STATUS_LP_10G_LBN (11) /* Link partner is 10GBT capable */
166 #define MDIO_AN_10GBT_STATUS_LP_LTA_LBN (10) /* LP loop timing ability */
167 #define MDIO_AN_10GBT_STATUS_LP_TRR_LBN (9) /* LP Training Reset Request */
170 /* Packing of the prt and dev arguments of clause 45 style MDIO into a
171 * single int so they can be passed into the mdio_read/write functions
172 * that currently exist. Note that as Falcon is the only current user,
173 * the packed form is chosen to match what Falcon needs to write into
174 * a register. This is checked at compile-time so do not change it. If
175 * your target chip needs things layed out differently you will need
176 * to unpack the arguments in your chip-specific mdio functions.
178 /* These are defined by the standard. */
179 #define MDIO45_PRT_ID_WIDTH (5)
180 #define MDIO45_DEV_ID_WIDTH (5)
182 /* The prt ID is just packed in immediately to the left of the dev ID */
183 #define MDIO45_PRT_DEV_WIDTH (MDIO45_PRT_ID_WIDTH + MDIO45_DEV_ID_WIDTH)
185 #define MDIO45_PRT_ID_MASK ((1 << MDIO45_PRT_DEV_WIDTH) - 1)
186 /* This is the prt + dev extended by 1 bit to hold the 'is clause 45' flag. */
187 #define MDIO45_XPRT_ID_WIDTH (MDIO45_PRT_DEV_WIDTH + 1)
188 #define MDIO45_XPRT_ID_MASK ((1 << MDIO45_XPRT_ID_WIDTH) - 1)
189 #define MDIO45_XPRT_ID_IS10G (1 << (MDIO45_XPRT_ID_WIDTH - 1))
192 #define MDIO45_PRT_ID_COMP_LBN MDIO45_DEV_ID_WIDTH
193 #define MDIO45_PRT_ID_COMP_WIDTH MDIO45_PRT_ID_WIDTH
194 #define MDIO45_DEV_ID_COMP_LBN 0
195 #define MDIO45_DEV_ID_COMP_WIDTH MDIO45_DEV_ID_WIDTH
197 /* Compose port and device into a phy_id */
198 static inline int mdio_clause45_pack(u8 prt, u8 dev)
201 EFX_POPULATE_DWORD_2(phy_id, MDIO45_PRT_ID_COMP, prt,
202 MDIO45_DEV_ID_COMP, dev);
203 return MDIO45_XPRT_ID_IS10G | EFX_DWORD_VAL(phy_id);
206 static inline void mdio_clause45_unpack(u32 val, u8 *prt, u8 *dev)
209 EFX_POPULATE_DWORD_1(phy_id, EFX_DWORD_0, val);
210 *prt = EFX_DWORD_FIELD(phy_id, MDIO45_PRT_ID_COMP);
211 *dev = EFX_DWORD_FIELD(phy_id, MDIO45_DEV_ID_COMP);
214 static inline int mdio_clause45_read(struct efx_nic *efx,
215 u8 prt, u8 dev, u16 addr)
217 return efx->mii.mdio_read(efx->net_dev,
218 mdio_clause45_pack(prt, dev), addr);
221 static inline void mdio_clause45_write(struct efx_nic *efx,
222 u8 prt, u8 dev, u16 addr, int value)
224 efx->mii.mdio_write(efx->net_dev,
225 mdio_clause45_pack(prt, dev), addr, value);
229 static inline u32 mdio_clause45_read_id(struct efx_nic *efx, int mmd)
231 int phy_id = efx->mii.phy_id;
232 u16 id_low = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_IDLOW);
233 u16 id_hi = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_IDHI);
234 return (id_hi << 16) | (id_low);
237 static inline bool mdio_clause45_phyxgxs_lane_sync(struct efx_nic *efx)
242 for (i = 0; i < 2; ++i)
243 lane_status = mdio_clause45_read(efx, efx->mii.phy_id,
245 MDIO_PHYXS_LANE_STATE);
247 sync = !!(lane_status & (1 << MDIO_PHYXS_LANE_ALIGNED_LBN));
249 EFX_LOG(efx, "XGXS lane status: %x\n", lane_status);
253 extern const char *mdio_clause45_mmd_name(int mmd);
256 * Reset a specific MMD and wait for reset to clear.
257 * Return number of spins left (>0) on success, -%ETIMEDOUT on failure.
259 * This function will sleep
261 extern int mdio_clause45_reset_mmd(struct efx_nic *efx, int mmd,
262 int spins, int spintime);
264 /* As mdio_clause45_check_mmd but for multiple MMDs */
265 int mdio_clause45_check_mmds(struct efx_nic *efx,
266 unsigned int mmd_mask, unsigned int fatal_mask);
268 /* Check the link status of specified mmds in bit mask */
269 extern bool mdio_clause45_links_ok(struct efx_nic *efx,
270 unsigned int mmd_mask);
272 /* Generic transmit disable support though PMAPMD */
273 extern void mdio_clause45_transmit_disable(struct efx_nic *efx);
275 /* Generic part of reconfigure: set/clear loopback bits */
276 extern void mdio_clause45_phy_reconfigure(struct efx_nic *efx);
278 /* Set the power state of the specified MMDs */
279 extern void mdio_clause45_set_mmds_lpower(struct efx_nic *efx,
280 int low_power, unsigned int mmd_mask);
282 /* Read (some of) the PHY settings over MDIO */
283 extern void mdio_clause45_get_settings(struct efx_nic *efx,
284 struct ethtool_cmd *ecmd);
286 /* Read (some of) the PHY settings over MDIO */
288 mdio_clause45_get_settings_ext(struct efx_nic *efx, struct ethtool_cmd *ecmd,
289 u32 xnp, u32 xnp_lpa);
291 /* Set (some of) the PHY settings over MDIO */
292 extern int mdio_clause45_set_settings(struct efx_nic *efx,
293 struct ethtool_cmd *ecmd);
295 /* Set pause parameters to be advertised through AN (if available) */
296 extern void mdio_clause45_set_pause(struct efx_nic *efx);
298 /* Get pause parameters from AN if available (otherwise return
299 * requested pause parameters)
301 enum efx_fc_type mdio_clause45_get_pause(struct efx_nic *efx);
303 /* Wait for specified MMDs to exit reset within a timeout */
304 extern int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
305 unsigned int mmd_mask);
307 /* Set or clear flag, debouncing */
308 extern void mdio_clause45_set_flag(struct efx_nic *efx, u8 prt, u8 dev,
309 u16 addr, int bit, bool sense);
311 #endif /* EFX_MDIO_10G_H */