2 * drivers/usb/host/ehci-orion.c
4 * Tzachi Perelstein <tzachi@marvell.com>
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/platform_device.h>
14 #include <linux/mbus.h>
15 #include <asm/plat-orion/ehci-orion.h>
17 #define rdl(off) __raw_readl(hcd->regs + (off))
18 #define wrl(off, val) __raw_writel((val), hcd->regs + (off))
21 #define USB_MODE 0x1a8
22 #define USB_CAUSE 0x310
23 #define USB_MASK 0x314
24 #define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
25 #define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
27 #define USB_PHY_PWR_CTRL 0x400
28 #define USB_PHY_TX_CTRL 0x420
29 #define USB_PHY_RX_CTRL 0x430
30 #define USB_PHY_IVREF_CTRL 0x440
31 #define USB_PHY_TST_GRP_CTRL 0x450
34 * Implement Orion USB controller specification guidelines
36 static void orion_usb_setup(struct usb_hcd *hcd)
39 * Clear interrupt cause and mask
47 wrl(USB_CMD, rdl(USB_CMD) | 0x2);
48 while (rdl(USB_CMD) & 0x2);
51 * GL# USB-10: Set IPG for non start of frame packets
54 wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
57 * GL# USB-9: USB 2.0 Power Control
60 wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
63 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
64 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
66 wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
69 * GL# USB-3 GL# USB-9: USB PHY Rx Control
70 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
71 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
73 wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
76 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
77 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
79 wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
82 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
83 * REG_FIFO_SQ_RST[15]=0
85 wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
88 * Stop and reset controller
90 wrl(USB_CMD, rdl(USB_CMD) & ~0x1);
91 wrl(USB_CMD, rdl(USB_CMD) | 0x2);
92 while (rdl(USB_CMD) & 0x2);
95 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
96 * TBD: This need to be done after each reset!
97 * GL# USB-4 Setup USB Host mode
102 static int ehci_orion_setup(struct usb_hcd *hcd)
104 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
107 retval = ehci_halt(ehci);
112 * data structure init
114 retval = ehci_init(hcd);
121 ehci_port_power(ehci, 0);
126 static const struct hc_driver ehci_orion_hc_driver = {
127 .description = hcd_name,
128 .product_desc = "Marvell Orion EHCI",
129 .hcd_priv_size = sizeof(struct ehci_hcd),
132 * generic hardware linkage
135 .flags = HCD_MEMORY | HCD_USB2,
138 * basic lifecycle operations
140 .reset = ehci_orion_setup,
143 .shutdown = ehci_shutdown,
146 * managing i/o requests and associated device resources
148 .urb_enqueue = ehci_urb_enqueue,
149 .urb_dequeue = ehci_urb_dequeue,
150 .endpoint_disable = ehci_endpoint_disable,
155 .get_frame_number = ehci_get_frame,
160 .hub_status_data = ehci_hub_status_data,
161 .hub_control = ehci_hub_control,
162 .bus_suspend = ehci_bus_suspend,
163 .bus_resume = ehci_bus_resume,
164 .relinquish_port = ehci_relinquish_port,
165 .port_handed_over = ehci_port_handed_over,
169 ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
170 struct mbus_dram_target_info *dram)
174 for (i = 0; i < 4; i++) {
175 wrl(USB_WINDOW_CTRL(i), 0);
176 wrl(USB_WINDOW_BASE(i), 0);
179 for (i = 0; i < dram->num_cs; i++) {
180 struct mbus_dram_window *cs = dram->cs + i;
182 wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
183 (cs->mbus_attr << 8) |
184 (dram->mbus_dram_target_id << 4) | 1);
185 wrl(USB_WINDOW_BASE(i), cs->base);
189 static int __init ehci_orion_drv_probe(struct platform_device *pdev)
191 struct orion_ehci_data *pd = pdev->dev.platform_data;
192 struct resource *res;
194 struct ehci_hcd *ehci;
201 pr_debug("Initializing Orion-SoC USB Host Controller\n");
203 irq = platform_get_irq(pdev, 0);
206 "Found HC with no IRQ. Check %s setup!\n",
207 dev_name(&pdev->dev));
212 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
215 "Found HC with no register addr. Check %s setup!\n",
216 dev_name(&pdev->dev));
221 if (!request_mem_region(res->start, res->end - res->start + 1,
222 ehci_orion_hc_driver.description)) {
223 dev_dbg(&pdev->dev, "controller already in use\n");
228 regs = ioremap(res->start, res->end - res->start + 1);
230 dev_dbg(&pdev->dev, "error mapping memory\n");
235 hcd = usb_create_hcd(&ehci_orion_hc_driver,
236 &pdev->dev, dev_name(&pdev->dev));
242 hcd->rsrc_start = res->start;
243 hcd->rsrc_len = res->end - res->start + 1;
246 ehci = hcd_to_ehci(hcd);
247 ehci->caps = hcd->regs + 0x100;
248 ehci->regs = hcd->regs + 0x100 +
249 HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
250 ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
255 * (Re-)program MBUS remapping windows if we are asked to.
257 if (pd != NULL && pd->dram != NULL)
258 ehci_orion_conf_mbus_windows(hcd, pd->dram);
261 * setup Orion USB controller
263 orion_usb_setup(hcd);
265 err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
276 release_mem_region(res->start, res->end - res->start + 1);
278 dev_err(&pdev->dev, "init %s fail, %d\n",
279 dev_name(&pdev->dev), err);
284 static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
286 struct usb_hcd *hcd = platform_get_drvdata(pdev);
290 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
296 MODULE_ALIAS("platform:orion-ehci");
298 static struct platform_driver ehci_orion_driver = {
299 .probe = ehci_orion_drv_probe,
300 .remove = __exit_p(ehci_orion_drv_remove),
301 .shutdown = usb_hcd_platform_shutdown,
302 .driver.name = "orion-ehci",