2 * Universal Interface for Intel High Definition Audio Codec
4 * HD audio interface patch for ALC 260/880/882 codecs
6 * Copyright (c) 2004 Kailang Yang <kailang@realtek.com.tw>
7 * PeiSen Hou <pshou@realtek.com.tw>
8 * Takashi Iwai <tiwai@suse.de>
9 * Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
11 * This driver is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
16 * This driver is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
26 #include <sound/driver.h>
27 #include <linux/init.h>
28 #include <linux/delay.h>
29 #include <linux/slab.h>
30 #include <linux/pci.h>
31 #include <sound/core.h>
32 #include "hda_codec.h"
33 #include "hda_local.h"
36 /* ALC880 board config type */
56 #ifdef CONFIG_SND_DEBUG
60 ALC880_MODEL_LAST /* last tag */
70 #ifdef CONFIG_SND_DEBUG
74 ALC260_MODEL_LAST /* last tag */
82 ALC262_MODEL_LAST /* last tag */
103 #define GPIO_MASK 0x03
106 /* codec parameterization */
107 struct snd_kcontrol_new *mixers[5]; /* mixer arrays */
108 unsigned int num_mixers;
110 const struct hda_verb *init_verbs[5]; /* initialization verbs
111 * don't forget NULL termination!
113 unsigned int num_init_verbs;
115 char *stream_name_analog; /* analog PCM stream */
116 struct hda_pcm_stream *stream_analog_playback;
117 struct hda_pcm_stream *stream_analog_capture;
119 char *stream_name_digital; /* digital PCM stream */
120 struct hda_pcm_stream *stream_digital_playback;
121 struct hda_pcm_stream *stream_digital_capture;
124 struct hda_multi_out multiout; /* playback set-up
125 * max_channels, dacs must be set
126 * dig_out_nid and hp_nid are optional
130 unsigned int num_adc_nids;
132 hda_nid_t dig_in_nid; /* digital-in NID; optional */
135 unsigned int num_mux_defs;
136 const struct hda_input_mux *input_mux;
137 unsigned int cur_mux[3];
140 const struct hda_channel_mode *channel_mode;
141 int num_channel_mode;
143 /* PCM information */
144 struct hda_pcm pcm_rec[3]; /* used in alc_build_pcms() */
146 /* dynamic controls, init_verbs and input_mux */
147 struct auto_pin_cfg autocfg;
148 unsigned int num_kctl_alloc, num_kctl_used;
149 struct snd_kcontrol_new *kctl_alloc;
150 struct hda_input_mux private_imux;
151 hda_nid_t private_dac_nids[5];
154 void (*init_hook)(struct hda_codec *codec);
155 void (*unsol_event)(struct hda_codec *codec, unsigned int res);
157 /* for pin sensing */
158 unsigned int sense_updated: 1;
159 unsigned int jack_present: 1;
163 * configuration template - to be copied to the spec instance
165 struct alc_config_preset {
166 struct snd_kcontrol_new *mixers[5]; /* should be identical size with spec */
167 const struct hda_verb *init_verbs[5];
168 unsigned int num_dacs;
170 hda_nid_t dig_out_nid; /* optional */
171 hda_nid_t hp_nid; /* optional */
172 unsigned int num_adc_nids;
174 hda_nid_t dig_in_nid;
175 unsigned int num_channel_mode;
176 const struct hda_channel_mode *channel_mode;
177 unsigned int num_mux_defs;
178 const struct hda_input_mux *input_mux;
179 void (*unsol_event)(struct hda_codec *, unsigned int);
180 void (*init_hook)(struct hda_codec *);
187 static int alc_mux_enum_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
189 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
190 struct alc_spec *spec = codec->spec;
191 unsigned int mux_idx = snd_ctl_get_ioffidx(kcontrol, &uinfo->id);
192 if (mux_idx >= spec->num_mux_defs)
194 return snd_hda_input_mux_info(&spec->input_mux[mux_idx], uinfo);
197 static int alc_mux_enum_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
199 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
200 struct alc_spec *spec = codec->spec;
201 unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
203 ucontrol->value.enumerated.item[0] = spec->cur_mux[adc_idx];
207 static int alc_mux_enum_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
209 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
210 struct alc_spec *spec = codec->spec;
211 unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
212 unsigned int mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx;
213 return snd_hda_input_mux_put(codec, &spec->input_mux[mux_idx], ucontrol,
214 spec->adc_nids[adc_idx], &spec->cur_mux[adc_idx]);
219 * channel mode setting
221 static int alc_ch_mode_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
223 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
224 struct alc_spec *spec = codec->spec;
225 return snd_hda_ch_mode_info(codec, uinfo, spec->channel_mode,
226 spec->num_channel_mode);
229 static int alc_ch_mode_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
231 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
232 struct alc_spec *spec = codec->spec;
233 return snd_hda_ch_mode_get(codec, ucontrol, spec->channel_mode,
234 spec->num_channel_mode, spec->multiout.max_channels);
237 static int alc_ch_mode_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
239 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
240 struct alc_spec *spec = codec->spec;
241 return snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode,
242 spec->num_channel_mode, &spec->multiout.max_channels);
246 * Control the mode of pin widget settings via the mixer. "pc" is used
247 * instead of "%" to avoid consequences of accidently treating the % as
248 * being part of a format specifier. Maximum allowed length of a value is
249 * 63 characters plus NULL terminator.
251 * Note: some retasking pin complexes seem to ignore requests for input
252 * states other than HiZ (eg: PIN_VREFxx) and revert to HiZ if any of these
253 * are requested. Therefore order this list so that this behaviour will not
254 * cause problems when mixer clients move through the enum sequentially.
255 * NIDs 0x0f and 0x10 have been observed to have this behaviour as of
258 static char *alc_pin_mode_names[] = {
259 "Mic 50pc bias", "Mic 80pc bias",
260 "Line in", "Line out", "Headphone out",
262 static unsigned char alc_pin_mode_values[] = {
263 PIN_VREF50, PIN_VREF80, PIN_IN, PIN_OUT, PIN_HP,
265 /* The control can present all 5 options, or it can limit the options based
266 * in the pin being assumed to be exclusively an input or an output pin. In
267 * addition, "input" pins may or may not process the mic bias option
268 * depending on actual widget capability (NIDs 0x0f and 0x10 don't seem to
269 * accept requests for bias as of chip versions up to March 2006) and/or
270 * wiring in the computer.
272 #define ALC_PIN_DIR_IN 0x00
273 #define ALC_PIN_DIR_OUT 0x01
274 #define ALC_PIN_DIR_INOUT 0x02
275 #define ALC_PIN_DIR_IN_NOMICBIAS 0x03
276 #define ALC_PIN_DIR_INOUT_NOMICBIAS 0x04
278 /* Info about the pin modes supported by the different pin direction modes.
279 * For each direction the minimum and maximum values are given.
281 static signed char alc_pin_mode_dir_info[5][2] = {
282 { 0, 2 }, /* ALC_PIN_DIR_IN */
283 { 3, 4 }, /* ALC_PIN_DIR_OUT */
284 { 0, 4 }, /* ALC_PIN_DIR_INOUT */
285 { 2, 2 }, /* ALC_PIN_DIR_IN_NOMICBIAS */
286 { 2, 4 }, /* ALC_PIN_DIR_INOUT_NOMICBIAS */
288 #define alc_pin_mode_min(_dir) (alc_pin_mode_dir_info[_dir][0])
289 #define alc_pin_mode_max(_dir) (alc_pin_mode_dir_info[_dir][1])
290 #define alc_pin_mode_n_items(_dir) \
291 (alc_pin_mode_max(_dir)-alc_pin_mode_min(_dir)+1)
293 static int alc_pin_mode_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
295 unsigned int item_num = uinfo->value.enumerated.item;
296 unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
298 uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
300 uinfo->value.enumerated.items = alc_pin_mode_n_items(dir);
302 if (item_num<alc_pin_mode_min(dir) || item_num>alc_pin_mode_max(dir))
303 item_num = alc_pin_mode_min(dir);
304 strcpy(uinfo->value.enumerated.name, alc_pin_mode_names[item_num]);
308 static int alc_pin_mode_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
311 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
312 hda_nid_t nid = kcontrol->private_value & 0xffff;
313 unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
314 long *valp = ucontrol->value.integer.value;
315 unsigned int pinctl = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_PIN_WIDGET_CONTROL,0x00);
317 /* Find enumerated value for current pinctl setting */
318 i = alc_pin_mode_min(dir);
319 while (alc_pin_mode_values[i]!=pinctl && i<=alc_pin_mode_max(dir))
321 *valp = i<=alc_pin_mode_max(dir)?i:alc_pin_mode_min(dir);
325 static int alc_pin_mode_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
328 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
329 hda_nid_t nid = kcontrol->private_value & 0xffff;
330 unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
331 long val = *ucontrol->value.integer.value;
332 unsigned int pinctl = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_PIN_WIDGET_CONTROL,0x00);
334 if (val<alc_pin_mode_min(dir) || val>alc_pin_mode_max(dir))
335 val = alc_pin_mode_min(dir);
337 change = pinctl != alc_pin_mode_values[val];
339 /* Set pin mode to that requested */
340 snd_hda_codec_write(codec,nid,0,AC_VERB_SET_PIN_WIDGET_CONTROL,
341 alc_pin_mode_values[val]);
343 /* Also enable the retasking pin's input/output as required
344 * for the requested pin mode. Enum values of 2 or less are
347 * Dynamically switching the input/output buffers probably
348 * reduces noise slightly (particularly on input) so we'll
349 * do it. However, having both input and output buffers
350 * enabled simultaneously doesn't seem to be problematic if
351 * this turns out to be necessary in the future.
354 snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
356 snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
359 snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
361 snd_hda_codec_write(codec,nid,0,AC_VERB_SET_AMP_GAIN_MUTE,
368 #define ALC_PIN_MODE(xname, nid, dir) \
369 { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
370 .info = alc_pin_mode_info, \
371 .get = alc_pin_mode_get, \
372 .put = alc_pin_mode_put, \
373 .private_value = nid | (dir<<16) }
375 /* A switch control for ALC260 GPIO pins. Multiple GPIOs can be ganged
376 * together using a mask with more than one bit set. This control is
377 * currently used only by the ALC260 test model. At this stage they are not
378 * needed for any "production" models.
380 #ifdef CONFIG_SND_DEBUG
381 static int alc_gpio_data_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
383 uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
385 uinfo->value.integer.min = 0;
386 uinfo->value.integer.max = 1;
389 static int alc_gpio_data_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
391 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
392 hda_nid_t nid = kcontrol->private_value & 0xffff;
393 unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
394 long *valp = ucontrol->value.integer.value;
395 unsigned int val = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_GPIO_DATA,0x00);
397 *valp = (val & mask) != 0;
400 static int alc_gpio_data_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
403 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
404 hda_nid_t nid = kcontrol->private_value & 0xffff;
405 unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
406 long val = *ucontrol->value.integer.value;
407 unsigned int gpio_data = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_GPIO_DATA,0x00);
409 /* Set/unset the masked GPIO bit(s) as needed */
410 change = (val==0?0:mask) != (gpio_data & mask);
415 snd_hda_codec_write(codec,nid,0,AC_VERB_SET_GPIO_DATA,gpio_data);
419 #define ALC_GPIO_DATA_SWITCH(xname, nid, mask) \
420 { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
421 .info = alc_gpio_data_info, \
422 .get = alc_gpio_data_get, \
423 .put = alc_gpio_data_put, \
424 .private_value = nid | (mask<<16) }
425 #endif /* CONFIG_SND_DEBUG */
427 /* A switch control to allow the enabling of the digital IO pins on the
428 * ALC260. This is incredibly simplistic; the intention of this control is
429 * to provide something in the test model allowing digital outputs to be
430 * identified if present. If models are found which can utilise these
431 * outputs a more complete mixer control can be devised for those models if
434 #ifdef CONFIG_SND_DEBUG
435 static int alc_spdif_ctrl_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
437 uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
439 uinfo->value.integer.min = 0;
440 uinfo->value.integer.max = 1;
443 static int alc_spdif_ctrl_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
445 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
446 hda_nid_t nid = kcontrol->private_value & 0xffff;
447 unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
448 long *valp = ucontrol->value.integer.value;
449 unsigned int val = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_DIGI_CONVERT,0x00);
451 *valp = (val & mask) != 0;
454 static int alc_spdif_ctrl_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
457 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
458 hda_nid_t nid = kcontrol->private_value & 0xffff;
459 unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
460 long val = *ucontrol->value.integer.value;
461 unsigned int ctrl_data = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_DIGI_CONVERT,0x00);
463 /* Set/unset the masked control bit(s) as needed */
464 change = (val==0?0:mask) != (ctrl_data & mask);
469 snd_hda_codec_write(codec,nid,0,AC_VERB_SET_DIGI_CONVERT_1,ctrl_data);
473 #define ALC_SPDIF_CTRL_SWITCH(xname, nid, mask) \
474 { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
475 .info = alc_spdif_ctrl_info, \
476 .get = alc_spdif_ctrl_get, \
477 .put = alc_spdif_ctrl_put, \
478 .private_value = nid | (mask<<16) }
479 #endif /* CONFIG_SND_DEBUG */
482 * set up from the preset table
484 static void setup_preset(struct alc_spec *spec, const struct alc_config_preset *preset)
488 for (i = 0; i < ARRAY_SIZE(preset->mixers) && preset->mixers[i]; i++)
489 spec->mixers[spec->num_mixers++] = preset->mixers[i];
490 for (i = 0; i < ARRAY_SIZE(preset->init_verbs) && preset->init_verbs[i]; i++)
491 spec->init_verbs[spec->num_init_verbs++] = preset->init_verbs[i];
493 spec->channel_mode = preset->channel_mode;
494 spec->num_channel_mode = preset->num_channel_mode;
496 spec->multiout.max_channels = spec->channel_mode[0].channels;
498 spec->multiout.num_dacs = preset->num_dacs;
499 spec->multiout.dac_nids = preset->dac_nids;
500 spec->multiout.dig_out_nid = preset->dig_out_nid;
501 spec->multiout.hp_nid = preset->hp_nid;
503 spec->num_mux_defs = preset->num_mux_defs;
504 if (! spec->num_mux_defs)
505 spec->num_mux_defs = 1;
506 spec->input_mux = preset->input_mux;
508 spec->num_adc_nids = preset->num_adc_nids;
509 spec->adc_nids = preset->adc_nids;
510 spec->dig_in_nid = preset->dig_in_nid;
512 spec->unsol_event = preset->unsol_event;
513 spec->init_hook = preset->init_hook;
517 * ALC880 3-stack model
519 * DAC: Front = 0x02 (0x0c), Surr = 0x05 (0x0f), CLFE = 0x04 (0x0e)
520 * Pin assignment: Front = 0x14, Line-In/Surr = 0x1a, Mic/CLFE = 0x18, F-Mic = 0x1b
524 static hda_nid_t alc880_dac_nids[4] = {
525 /* front, rear, clfe, rear_surr */
526 0x02, 0x05, 0x04, 0x03
529 static hda_nid_t alc880_adc_nids[3] = {
534 /* The datasheet says the node 0x07 is connected from inputs,
535 * but it shows zero connection in the real implementation on some devices.
536 * Note: this is a 915GAV bug, fixed on 915GLV
538 static hda_nid_t alc880_adc_nids_alt[2] = {
543 #define ALC880_DIGOUT_NID 0x06
544 #define ALC880_DIGIN_NID 0x0a
546 static struct hda_input_mux alc880_capture_source = {
550 { "Front Mic", 0x3 },
556 /* channel source setting (2/6 channel selection for 3-stack) */
558 static struct hda_verb alc880_threestack_ch2_init[] = {
559 /* set line-in to input, mute it */
560 { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
561 { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
562 /* set mic-in to input vref 80%, mute it */
563 { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
564 { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
569 static struct hda_verb alc880_threestack_ch6_init[] = {
570 /* set line-in to output, unmute it */
571 { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
572 { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
573 /* set mic-in to output, unmute it */
574 { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
575 { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
579 static struct hda_channel_mode alc880_threestack_modes[2] = {
580 { 2, alc880_threestack_ch2_init },
581 { 6, alc880_threestack_ch6_init },
584 static struct snd_kcontrol_new alc880_three_stack_mixer[] = {
585 HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
586 HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
587 HDA_CODEC_VOLUME("Surround Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
588 HDA_BIND_MUTE("Surround Playback Switch", 0x0f, 2, HDA_INPUT),
589 HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
590 HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
591 HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
592 HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
593 HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
594 HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
595 HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
596 HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
597 HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
598 HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
599 HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x3, HDA_INPUT),
600 HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x3, HDA_INPUT),
601 HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
602 HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
603 HDA_CODEC_MUTE("Headphone Playback Switch", 0x19, 0x0, HDA_OUTPUT),
605 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
606 .name = "Channel Mode",
607 .info = alc_ch_mode_info,
608 .get = alc_ch_mode_get,
609 .put = alc_ch_mode_put,
614 /* capture mixer elements */
615 static struct snd_kcontrol_new alc880_capture_mixer[] = {
616 HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
617 HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
618 HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
619 HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
620 HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
621 HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
623 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
624 /* The multiple "Capture Source" controls confuse alsamixer
625 * So call somewhat different..
626 * FIXME: the controls appear in the "playback" view!
628 /* .name = "Capture Source", */
629 .name = "Input Source",
631 .info = alc_mux_enum_info,
632 .get = alc_mux_enum_get,
633 .put = alc_mux_enum_put,
638 /* capture mixer elements (in case NID 0x07 not available) */
639 static struct snd_kcontrol_new alc880_capture_alt_mixer[] = {
640 HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
641 HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
642 HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
643 HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
645 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
646 /* The multiple "Capture Source" controls confuse alsamixer
647 * So call somewhat different..
648 * FIXME: the controls appear in the "playback" view!
650 /* .name = "Capture Source", */
651 .name = "Input Source",
653 .info = alc_mux_enum_info,
654 .get = alc_mux_enum_get,
655 .put = alc_mux_enum_put,
663 * ALC880 5-stack model
665 * DAC: Front = 0x02 (0x0c), Surr = 0x05 (0x0f), CLFE = 0x04 (0x0d), Side = 0x02 (0xd)
666 * Pin assignment: Front = 0x14, Surr = 0x17, CLFE = 0x16
667 * Line-In/Side = 0x1a, Mic = 0x18, F-Mic = 0x1b, HP = 0x19
670 /* additional mixers to alc880_three_stack_mixer */
671 static struct snd_kcontrol_new alc880_five_stack_mixer[] = {
672 HDA_CODEC_VOLUME("Side Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
673 HDA_BIND_MUTE("Side Playback Switch", 0x0d, 2, HDA_INPUT),
677 /* channel source setting (6/8 channel selection for 5-stack) */
679 static struct hda_verb alc880_fivestack_ch6_init[] = {
680 /* set line-in to input, mute it */
681 { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
682 { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
687 static struct hda_verb alc880_fivestack_ch8_init[] = {
688 /* set line-in to output, unmute it */
689 { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
690 { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
694 static struct hda_channel_mode alc880_fivestack_modes[2] = {
695 { 6, alc880_fivestack_ch6_init },
696 { 8, alc880_fivestack_ch8_init },
701 * ALC880 6-stack model
703 * DAC: Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e), Side = 0x05 (0x0f)
704 * Pin assignment: Front = 0x14, Surr = 0x15, CLFE = 0x16, Side = 0x17,
705 * Mic = 0x18, F-Mic = 0x19, Line = 0x1a, HP = 0x1b
708 static hda_nid_t alc880_6st_dac_nids[4] = {
709 /* front, rear, clfe, rear_surr */
710 0x02, 0x03, 0x04, 0x05
713 static struct hda_input_mux alc880_6stack_capture_source = {
717 { "Front Mic", 0x1 },
723 /* fixed 8-channels */
724 static struct hda_channel_mode alc880_sixstack_modes[1] = {
728 static struct snd_kcontrol_new alc880_six_stack_mixer[] = {
729 HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
730 HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
731 HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
732 HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
733 HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
734 HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
735 HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
736 HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
737 HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
738 HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
739 HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
740 HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
741 HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
742 HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
743 HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
744 HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
745 HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
746 HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
747 HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
748 HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
750 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
751 .name = "Channel Mode",
752 .info = alc_ch_mode_info,
753 .get = alc_ch_mode_get,
754 .put = alc_ch_mode_put,
763 * W810 has rear IO for:
766 * Center/LFE (DAC 04)
769 * The system also has a pair of internal speakers, and a headphone jack.
770 * These are both connected to Line2 on the codec, hence to DAC 02.
772 * There is a variable resistor to control the speaker or headphone
773 * volume. This is a hardware-only device without a software API.
775 * Plugging headphones in will disable the internal speakers. This is
776 * implemented in hardware, not via the driver using jack sense. In
777 * a similar fashion, plugging into the rear socket marked "front" will
778 * disable both the speakers and headphones.
780 * For input, there's a microphone jack, and an "audio in" jack.
781 * These may not do anything useful with this driver yet, because I
782 * haven't setup any initialization verbs for these yet...
785 static hda_nid_t alc880_w810_dac_nids[3] = {
786 /* front, rear/surround, clfe */
790 /* fixed 6 channels */
791 static struct hda_channel_mode alc880_w810_modes[1] = {
795 /* Pin assignment: Front = 0x14, Surr = 0x15, CLFE = 0x16, HP = 0x1b */
796 static struct snd_kcontrol_new alc880_w810_base_mixer[] = {
797 HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
798 HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
799 HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
800 HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
801 HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
802 HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
803 HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
804 HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
805 HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
813 * DAC: Front = 0x02 (0x0c), HP = 0x03 (0x0d)
814 * Pin assignment: Front = 0x14, HP = 0x15, Mic = 0x18, Mic2 = 0x19(?), Line = 0x1a
817 static hda_nid_t alc880_z71v_dac_nids[1] = {
820 #define ALC880_Z71V_HP_DAC 0x03
822 /* fixed 2 channels */
823 static struct hda_channel_mode alc880_2_jack_modes[1] = {
827 static struct snd_kcontrol_new alc880_z71v_mixer[] = {
828 HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
829 HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
830 HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
831 HDA_BIND_MUTE("Headphone Playback Switch", 0x0d, 2, HDA_INPUT),
832 HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
833 HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
834 HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
835 HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
844 * DAC: HP = 0x02 (0x0c), Front = 0x03 (0x0d)
845 * Pin assignment: HP = 0x14, Front = 0x15, Mic = 0x18
848 static hda_nid_t alc880_f1734_dac_nids[1] = {
851 #define ALC880_F1734_HP_DAC 0x02
853 static struct snd_kcontrol_new alc880_f1734_mixer[] = {
854 HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
855 HDA_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT),
856 HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
857 HDA_BIND_MUTE("Internal Speaker Playback Switch", 0x0d, 2, HDA_INPUT),
858 HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
859 HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
860 HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
861 HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
870 * DAC: HP/Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e)
871 * Pin assignment: HP/Front = 0x14, Surr = 0x15, CLFE = 0x16,
872 * Mic = 0x18, Line = 0x1a
875 #define alc880_asus_dac_nids alc880_w810_dac_nids /* identical with w810 */
876 #define alc880_asus_modes alc880_threestack_modes /* 2/6 channel mode */
878 static struct snd_kcontrol_new alc880_asus_mixer[] = {
879 HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
880 HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
881 HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
882 HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
883 HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
884 HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
885 HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
886 HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
887 HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
888 HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
889 HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
890 HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
891 HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
892 HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
894 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
895 .name = "Channel Mode",
896 .info = alc_ch_mode_info,
897 .get = alc_ch_mode_get,
898 .put = alc_ch_mode_put,
905 * ALC880 ASUS W1V model
907 * DAC: HP/Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e)
908 * Pin assignment: HP/Front = 0x14, Surr = 0x15, CLFE = 0x16,
909 * Mic = 0x18, Line = 0x1a, Line2 = 0x1b
912 /* additional mixers to alc880_asus_mixer */
913 static struct snd_kcontrol_new alc880_asus_w1v_mixer[] = {
914 HDA_CODEC_VOLUME("Line2 Playback Volume", 0x0b, 0x03, HDA_INPUT),
915 HDA_CODEC_MUTE("Line2 Playback Switch", 0x0b, 0x03, HDA_INPUT),
919 /* additional mixers to alc880_asus_mixer */
920 static struct snd_kcontrol_new alc880_pcbeep_mixer[] = {
921 HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
922 HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
927 static struct snd_kcontrol_new alc880_tcl_s700_mixer[] = {
928 HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
929 HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
930 HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT),
931 HDA_CODEC_VOLUME("CD Playback Volume", 0x0B, 0x04, HDA_INPUT),
932 HDA_CODEC_MUTE("CD Playback Switch", 0x0B, 0x04, HDA_INPUT),
933 HDA_CODEC_VOLUME("Mic Playback Volume", 0x0B, 0x0, HDA_INPUT),
934 HDA_CODEC_MUTE("Mic Playback Switch", 0x0B, 0x0, HDA_INPUT),
935 HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
936 HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
938 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
939 /* The multiple "Capture Source" controls confuse alsamixer
940 * So call somewhat different..
941 * FIXME: the controls appear in the "playback" view!
943 /* .name = "Capture Source", */
944 .name = "Input Source",
946 .info = alc_mux_enum_info,
947 .get = alc_mux_enum_get,
948 .put = alc_mux_enum_put,
954 * build control elements
956 static int alc_build_controls(struct hda_codec *codec)
958 struct alc_spec *spec = codec->spec;
962 for (i = 0; i < spec->num_mixers; i++) {
963 err = snd_hda_add_new_ctls(codec, spec->mixers[i]);
968 if (spec->multiout.dig_out_nid) {
969 err = snd_hda_create_spdif_out_ctls(codec, spec->multiout.dig_out_nid);
973 if (spec->dig_in_nid) {
974 err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in_nid);
983 * initialize the codec volumes, etc
987 * generic initialization of ADC, input mixers and output mixers
989 static struct hda_verb alc880_volume_init_verbs[] = {
991 * Unmute ADC0-2 and set the default input to mic-in
993 {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
994 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
995 {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
996 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
997 {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
998 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
1000 /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
1002 * Note: PASD motherboards uses the Line In 2 as the input for front panel
1005 /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
1006 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
1007 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
1008 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
1009 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
1010 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
1013 * Set up output mixers (0x0c - 0x0f)
1015 /* set vol=0 to output mixers */
1016 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
1017 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
1018 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
1019 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
1020 /* set up input amps for analog loopback */
1021 /* Amp Indices: DAC = 0, mixer = 1 */
1022 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
1023 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
1024 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
1025 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
1026 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
1027 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
1028 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
1029 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
1035 * 3-stack pin configuration:
1036 * front = 0x14, mic/clfe = 0x18, HP = 0x19, line/surr = 0x1a, f-mic = 0x1b
1038 static struct hda_verb alc880_pin_3stack_init_verbs[] = {
1040 * preset connection lists of input pins
1041 * 0 = front, 1 = rear_surr, 2 = CLFE, 3 = surround
1043 {0x10, AC_VERB_SET_CONNECT_SEL, 0x02}, /* mic/clfe */
1044 {0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
1045 {0x12, AC_VERB_SET_CONNECT_SEL, 0x03}, /* line/surround */
1048 * Set pin mode and muting
1050 /* set front pin widgets 0x14 for output */
1051 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1052 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1053 /* Mic1 (rear panel) pin widget for input and vref at 80% */
1054 {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1055 {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
1056 /* Mic2 (as headphone out) for HP output */
1057 {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
1058 {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1059 /* Line In pin widget for input */
1060 {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1061 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
1062 /* Line2 (as front mic) pin widget for input and vref at 80% */
1063 {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1064 {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
1065 /* CD pin widget for input */
1066 {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1072 * 5-stack pin configuration:
1073 * front = 0x14, surround = 0x17, clfe = 0x16, mic = 0x18, HP = 0x19,
1074 * line-in/side = 0x1a, f-mic = 0x1b
1076 static struct hda_verb alc880_pin_5stack_init_verbs[] = {
1078 * preset connection lists of input pins
1079 * 0 = front, 1 = rear_surr, 2 = CLFE, 3 = surround
1081 {0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
1082 {0x12, AC_VERB_SET_CONNECT_SEL, 0x01}, /* line/side */
1085 * Set pin mode and muting
1087 /* set pin widgets 0x14-0x17 for output */
1088 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1089 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1090 {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1091 {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1092 /* unmute pins for output (no gain on this amp) */
1093 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1094 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1095 {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1096 {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1098 /* Mic1 (rear panel) pin widget for input and vref at 80% */
1099 {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1100 {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
1101 /* Mic2 (as headphone out) for HP output */
1102 {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
1103 {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1104 /* Line In pin widget for input */
1105 {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1106 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
1107 /* Line2 (as front mic) pin widget for input and vref at 80% */
1108 {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1109 {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
1110 /* CD pin widget for input */
1111 {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1117 * W810 pin configuration:
1118 * front = 0x14, surround = 0x15, clfe = 0x16, HP = 0x1b
1120 static struct hda_verb alc880_pin_w810_init_verbs[] = {
1121 /* hphone/speaker input selector: front DAC */
1122 {0x13, AC_VERB_SET_CONNECT_SEL, 0x0},
1124 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1125 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1126 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1127 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1128 {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1129 {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1131 {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
1132 {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
1138 * Z71V pin configuration:
1139 * Speaker-out = 0x14, HP = 0x15, Mic = 0x18, Line-in = 0x1a, Mic2 = 0x1b (?)
1141 static struct hda_verb alc880_pin_z71v_init_verbs[] = {
1142 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1143 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1144 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
1145 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1147 {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1148 {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1149 {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1150 {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1156 * 6-stack pin configuration:
1157 * front = 0x14, surr = 0x15, clfe = 0x16, side = 0x17, mic = 0x18, f-mic = 0x19,
1158 * line = 0x1a, HP = 0x1b
1160 static struct hda_verb alc880_pin_6stack_init_verbs[] = {
1161 {0x13, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
1163 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1164 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1165 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1166 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1167 {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1168 {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1169 {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1170 {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1172 {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1173 {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
1174 {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1175 {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
1176 {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1177 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
1178 {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
1179 {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1180 {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1187 * F1734 pin configuration:
1188 * HP = 0x14, speaker-out = 0x15, mic = 0x18
1190 static struct hda_verb alc880_pin_f1734_init_verbs[] = {
1191 {0x10, AC_VERB_SET_CONNECT_SEL, 0x02},
1192 {0x11, AC_VERB_SET_CONNECT_SEL, 0x00},
1193 {0x12, AC_VERB_SET_CONNECT_SEL, 0x01},
1194 {0x13, AC_VERB_SET_CONNECT_SEL, 0x00},
1196 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
1197 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1198 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1199 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1201 {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1202 {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
1203 {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1204 {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
1205 {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1206 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1207 {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1208 {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1209 {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1216 * ASUS pin configuration:
1217 * HP/front = 0x14, surr = 0x15, clfe = 0x16, mic = 0x18, line = 0x1a
1219 static struct hda_verb alc880_pin_asus_init_verbs[] = {
1220 {0x10, AC_VERB_SET_CONNECT_SEL, 0x02},
1221 {0x11, AC_VERB_SET_CONNECT_SEL, 0x00},
1222 {0x12, AC_VERB_SET_CONNECT_SEL, 0x01},
1223 {0x13, AC_VERB_SET_CONNECT_SEL, 0x00},
1225 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
1226 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1227 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1228 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1229 {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1230 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1231 {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1232 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1234 {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1235 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
1236 {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1237 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
1238 {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1239 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
1240 {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1241 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1242 {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1247 /* Enable GPIO mask and set output */
1248 static struct hda_verb alc880_gpio1_init_verbs[] = {
1249 {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
1250 {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
1251 {0x01, AC_VERB_SET_GPIO_DATA, 0x01},
1256 /* Enable GPIO mask and set output */
1257 static struct hda_verb alc880_gpio2_init_verbs[] = {
1258 {0x01, AC_VERB_SET_GPIO_MASK, 0x02},
1259 {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
1260 {0x01, AC_VERB_SET_GPIO_DATA, 0x02},
1265 /* Clevo m520g init */
1266 static struct hda_verb alc880_pin_clevo_init_verbs[] = {
1267 /* headphone output */
1268 {0x11, AC_VERB_SET_CONNECT_SEL, 0x01},
1270 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1271 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1273 {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1274 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1276 {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1277 {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1278 /* Mic1 (rear panel) */
1279 {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1280 {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1281 /* Mic2 (front panel) */
1282 {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1283 {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1285 {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
1286 {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1287 /* change to EAPD mode */
1288 {0x20, AC_VERB_SET_COEF_INDEX, 0x07},
1289 {0x20, AC_VERB_SET_PROC_COEF, 0x3060},
1294 static struct hda_verb alc880_pin_tcl_S700_init_verbs[] = {
1295 /* Headphone output */
1296 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
1298 {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
1299 {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
1301 /* Line In pin widget for input */
1302 {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1303 /* CD pin widget for input */
1304 {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1305 /* Mic1 (rear panel) pin widget for input and vref at 80% */
1306 {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1308 /* change to EAPD mode */
1309 {0x20, AC_VERB_SET_COEF_INDEX, 0x07},
1310 {0x20, AC_VERB_SET_PROC_COEF, 0x3070},
1316 * LG m1 express dual
1319 * Rear Line-In/Out (blue): 0x14
1320 * Build-in Mic-In: 0x15
1322 * HP-Out (green): 0x1b
1323 * Mic-In/Out (red): 0x19
1327 /* To make 5.1 output working (green=Front, blue=Surr, red=CLFE) */
1328 static hda_nid_t alc880_lg_dac_nids[3] = {
1332 /* seems analog CD is not working */
1333 static struct hda_input_mux alc880_lg_capture_source = {
1338 { "Internal Mic", 0x6 },
1342 /* 2,4,6 channel modes */
1343 static struct hda_verb alc880_lg_ch2_init[] = {
1344 /* set line-in and mic-in to input */
1345 { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
1346 { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
1350 static struct hda_verb alc880_lg_ch4_init[] = {
1351 /* set line-in to out and mic-in to input */
1352 { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
1353 { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
1357 static struct hda_verb alc880_lg_ch6_init[] = {
1358 /* set line-in and mic-in to output */
1359 { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
1360 { 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
1364 static struct hda_channel_mode alc880_lg_ch_modes[3] = {
1365 { 2, alc880_lg_ch2_init },
1366 { 4, alc880_lg_ch4_init },
1367 { 6, alc880_lg_ch6_init },
1370 static struct snd_kcontrol_new alc880_lg_mixer[] = {
1371 /* FIXME: it's not really "master" but front channels */
1372 HDA_CODEC_VOLUME("Master Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
1373 HDA_BIND_MUTE("Master Playback Switch", 0x0f, 2, HDA_INPUT),
1374 HDA_CODEC_VOLUME("Surround Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
1375 HDA_BIND_MUTE("Surround Playback Switch", 0x0c, 2, HDA_INPUT),
1376 HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0d, 1, 0x0, HDA_OUTPUT),
1377 HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0d, 2, 0x0, HDA_OUTPUT),
1378 HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0d, 1, 2, HDA_INPUT),
1379 HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0d, 2, 2, HDA_INPUT),
1380 HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
1381 HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
1382 HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x06, HDA_INPUT),
1383 HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x06, HDA_INPUT),
1384 HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x07, HDA_INPUT),
1385 HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x07, HDA_INPUT),
1387 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
1388 .name = "Channel Mode",
1389 .info = alc_ch_mode_info,
1390 .get = alc_ch_mode_get,
1391 .put = alc_ch_mode_put,
1396 static struct hda_verb alc880_lg_init_verbs[] = {
1397 /* set capture source to mic-in */
1398 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
1399 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
1400 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
1401 /* mute all amp mixer inputs */
1402 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(5)},
1403 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(6)},
1404 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(7)},
1405 /* line-in to input */
1406 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
1407 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1409 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1410 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1412 {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
1413 {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1414 /* mic-in to input */
1415 {0x11, AC_VERB_SET_CONNECT_SEL, 0x01},
1416 {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1417 {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1419 {0x13, AC_VERB_SET_CONNECT_SEL, 0x03},
1420 {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
1421 {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1423 {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | 0x1},
1427 /* toggle speaker-output according to the hp-jack state */
1428 static void alc880_lg_automute(struct hda_codec *codec)
1430 unsigned int present;
1432 present = snd_hda_codec_read(codec, 0x1b, 0,
1433 AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
1434 snd_hda_codec_amp_update(codec, 0x17, 0, HDA_OUTPUT, 0,
1435 0x80, present ? 0x80 : 0);
1436 snd_hda_codec_amp_update(codec, 0x17, 1, HDA_OUTPUT, 0,
1437 0x80, present ? 0x80 : 0);
1440 static void alc880_lg_unsol_event(struct hda_codec *codec, unsigned int res)
1442 /* Looks like the unsol event is incompatible with the standard
1443 * definition. 4bit tag is placed at 28 bit!
1445 if ((res >> 28) == 0x01)
1446 alc880_lg_automute(codec);
1455 * Built-in Mic-In: 0x19 (?)
1460 /* seems analog CD is not working */
1461 static struct hda_input_mux alc880_lg_lw_capture_source = {
1465 { "Internal Mic", 0x1 },
1469 static struct snd_kcontrol_new alc880_lg_lw_mixer[] = {
1470 HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
1471 HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT),
1472 HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
1473 HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
1474 HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
1475 HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
1479 static struct hda_verb alc880_lg_lw_init_verbs[] = {
1480 /* set capture source to mic-in */
1481 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
1482 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
1483 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
1484 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(7)},
1486 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
1487 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1489 {0x13, AC_VERB_SET_CONNECT_SEL, 0x00},
1490 {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
1491 {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1492 /* mic-in to input */
1493 {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1494 {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1496 {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
1497 {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
1499 {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | 0x1},
1503 /* toggle speaker-output according to the hp-jack state */
1504 static void alc880_lg_lw_automute(struct hda_codec *codec)
1506 unsigned int present;
1508 present = snd_hda_codec_read(codec, 0x1b, 0,
1509 AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
1510 snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0,
1511 0x80, present ? 0x80 : 0);
1512 snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0,
1513 0x80, present ? 0x80 : 0);
1516 static void alc880_lg_lw_unsol_event(struct hda_codec *codec, unsigned int res)
1518 /* Looks like the unsol event is incompatible with the standard
1519 * definition. 4bit tag is placed at 28 bit!
1521 if ((res >> 28) == 0x01)
1522 alc880_lg_lw_automute(codec);
1529 static int alc_init(struct hda_codec *codec)
1531 struct alc_spec *spec = codec->spec;
1534 for (i = 0; i < spec->num_init_verbs; i++)
1535 snd_hda_sequence_write(codec, spec->init_verbs[i]);
1537 if (spec->init_hook)
1538 spec->init_hook(codec);
1543 static void alc_unsol_event(struct hda_codec *codec, unsigned int res)
1545 struct alc_spec *spec = codec->spec;
1547 if (spec->unsol_event)
1548 spec->unsol_event(codec, res);
1555 static int alc_resume(struct hda_codec *codec)
1557 struct alc_spec *spec = codec->spec;
1561 for (i = 0; i < spec->num_mixers; i++)
1562 snd_hda_resume_ctls(codec, spec->mixers[i]);
1563 if (spec->multiout.dig_out_nid)
1564 snd_hda_resume_spdif_out(codec);
1565 if (spec->dig_in_nid)
1566 snd_hda_resume_spdif_in(codec);
1573 * Analog playback callbacks
1575 static int alc880_playback_pcm_open(struct hda_pcm_stream *hinfo,
1576 struct hda_codec *codec,
1577 struct snd_pcm_substream *substream)
1579 struct alc_spec *spec = codec->spec;
1580 return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream);
1583 static int alc880_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
1584 struct hda_codec *codec,
1585 unsigned int stream_tag,
1586 unsigned int format,
1587 struct snd_pcm_substream *substream)
1589 struct alc_spec *spec = codec->spec;
1590 return snd_hda_multi_out_analog_prepare(codec, &spec->multiout, stream_tag,
1594 static int alc880_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
1595 struct hda_codec *codec,
1596 struct snd_pcm_substream *substream)
1598 struct alc_spec *spec = codec->spec;
1599 return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout);
1605 static int alc880_dig_playback_pcm_open(struct hda_pcm_stream *hinfo,
1606 struct hda_codec *codec,
1607 struct snd_pcm_substream *substream)
1609 struct alc_spec *spec = codec->spec;
1610 return snd_hda_multi_out_dig_open(codec, &spec->multiout);
1613 static int alc880_dig_playback_pcm_close(struct hda_pcm_stream *hinfo,
1614 struct hda_codec *codec,
1615 struct snd_pcm_substream *substream)
1617 struct alc_spec *spec = codec->spec;
1618 return snd_hda_multi_out_dig_close(codec, &spec->multiout);
1624 static int alc880_capture_pcm_prepare(struct hda_pcm_stream *hinfo,
1625 struct hda_codec *codec,
1626 unsigned int stream_tag,
1627 unsigned int format,
1628 struct snd_pcm_substream *substream)
1630 struct alc_spec *spec = codec->spec;
1632 snd_hda_codec_setup_stream(codec, spec->adc_nids[substream->number],
1633 stream_tag, 0, format);
1637 static int alc880_capture_pcm_cleanup(struct hda_pcm_stream *hinfo,
1638 struct hda_codec *codec,
1639 struct snd_pcm_substream *substream)
1641 struct alc_spec *spec = codec->spec;
1643 snd_hda_codec_setup_stream(codec, spec->adc_nids[substream->number], 0, 0, 0);
1650 static struct hda_pcm_stream alc880_pcm_analog_playback = {
1654 /* NID is set in alc_build_pcms */
1656 .open = alc880_playback_pcm_open,
1657 .prepare = alc880_playback_pcm_prepare,
1658 .cleanup = alc880_playback_pcm_cleanup
1662 static struct hda_pcm_stream alc880_pcm_analog_capture = {
1666 /* NID is set in alc_build_pcms */
1668 .prepare = alc880_capture_pcm_prepare,
1669 .cleanup = alc880_capture_pcm_cleanup
1673 static struct hda_pcm_stream alc880_pcm_digital_playback = {
1677 /* NID is set in alc_build_pcms */
1679 .open = alc880_dig_playback_pcm_open,
1680 .close = alc880_dig_playback_pcm_close
1684 static struct hda_pcm_stream alc880_pcm_digital_capture = {
1688 /* NID is set in alc_build_pcms */
1691 /* Used by alc_build_pcms to flag that a PCM has no playback stream */
1692 static struct hda_pcm_stream alc_pcm_null_playback = {
1698 static int alc_build_pcms(struct hda_codec *codec)
1700 struct alc_spec *spec = codec->spec;
1701 struct hda_pcm *info = spec->pcm_rec;
1704 codec->num_pcms = 1;
1705 codec->pcm_info = info;
1707 info->name = spec->stream_name_analog;
1708 if (spec->stream_analog_playback) {
1709 snd_assert(spec->multiout.dac_nids, return -EINVAL);
1710 info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_analog_playback);
1711 info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dac_nids[0];
1713 if (spec->stream_analog_capture) {
1714 snd_assert(spec->adc_nids, return -EINVAL);
1715 info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture);
1716 info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[0];
1719 if (spec->channel_mode) {
1720 info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = 0;
1721 for (i = 0; i < spec->num_channel_mode; i++) {
1722 if (spec->channel_mode[i].channels > info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max) {
1723 info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = spec->channel_mode[i].channels;
1728 /* If the use of more than one ADC is requested for the current
1729 * model, configure a second analog capture-only PCM.
1731 if (spec->num_adc_nids > 1) {
1734 info->name = spec->stream_name_analog;
1735 /* No playback stream for second PCM */
1736 info->stream[SNDRV_PCM_STREAM_PLAYBACK] = alc_pcm_null_playback;
1737 info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = 0;
1738 if (spec->stream_analog_capture) {
1739 snd_assert(spec->adc_nids, return -EINVAL);
1740 info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture);
1741 info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[1];
1745 if (spec->multiout.dig_out_nid || spec->dig_in_nid) {
1748 info->name = spec->stream_name_digital;
1749 if (spec->multiout.dig_out_nid &&
1750 spec->stream_digital_playback) {
1751 info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_digital_playback);
1752 info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dig_out_nid;
1754 if (spec->dig_in_nid &&
1755 spec->stream_digital_capture) {
1756 info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_digital_capture);
1757 info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in_nid;
1764 static void alc_free(struct hda_codec *codec)
1766 struct alc_spec *spec = codec->spec;
1772 if (spec->kctl_alloc) {
1773 for (i = 0; i < spec->num_kctl_used; i++)
1774 kfree(spec->kctl_alloc[i].name);
1775 kfree(spec->kctl_alloc);
1782 static struct hda_codec_ops alc_patch_ops = {
1783 .build_controls = alc_build_controls,
1784 .build_pcms = alc_build_pcms,
1787 .unsol_event = alc_unsol_event,
1789 .resume = alc_resume,
1795 * Test configuration for debugging
1797 * Almost all inputs/outputs are enabled. I/O pins can be configured via
1800 #ifdef CONFIG_SND_DEBUG
1801 static hda_nid_t alc880_test_dac_nids[4] = {
1802 0x02, 0x03, 0x04, 0x05
1805 static struct hda_input_mux alc880_test_capture_source = {
1814 { "Surround", 0x6 },
1818 static struct hda_channel_mode alc880_test_modes[4] = {
1825 static int alc_test_pin_ctl_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
1827 static char *texts[] = {
1828 "N/A", "Line Out", "HP Out",
1829 "In Hi-Z", "In 50%", "In Grd", "In 80%", "In 100%"
1831 uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
1833 uinfo->value.enumerated.items = 8;
1834 if (uinfo->value.enumerated.item >= 8)
1835 uinfo->value.enumerated.item = 7;
1836 strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
1840 static int alc_test_pin_ctl_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
1842 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
1843 hda_nid_t nid = (hda_nid_t)kcontrol->private_value;
1844 unsigned int pin_ctl, item = 0;
1846 pin_ctl = snd_hda_codec_read(codec, nid, 0,
1847 AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
1848 if (pin_ctl & AC_PINCTL_OUT_EN) {
1849 if (pin_ctl & AC_PINCTL_HP_EN)
1853 } else if (pin_ctl & AC_PINCTL_IN_EN) {
1854 switch (pin_ctl & AC_PINCTL_VREFEN) {
1855 case AC_PINCTL_VREF_HIZ: item = 3; break;
1856 case AC_PINCTL_VREF_50: item = 4; break;
1857 case AC_PINCTL_VREF_GRD: item = 5; break;
1858 case AC_PINCTL_VREF_80: item = 6; break;
1859 case AC_PINCTL_VREF_100: item = 7; break;
1862 ucontrol->value.enumerated.item[0] = item;
1866 static int alc_test_pin_ctl_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
1868 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
1869 hda_nid_t nid = (hda_nid_t)kcontrol->private_value;
1870 static unsigned int ctls[] = {
1871 0, AC_PINCTL_OUT_EN, AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN,
1872 AC_PINCTL_IN_EN | AC_PINCTL_VREF_HIZ,
1873 AC_PINCTL_IN_EN | AC_PINCTL_VREF_50,
1874 AC_PINCTL_IN_EN | AC_PINCTL_VREF_GRD,
1875 AC_PINCTL_IN_EN | AC_PINCTL_VREF_80,
1876 AC_PINCTL_IN_EN | AC_PINCTL_VREF_100,
1878 unsigned int old_ctl, new_ctl;
1880 old_ctl = snd_hda_codec_read(codec, nid, 0,
1881 AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
1882 new_ctl = ctls[ucontrol->value.enumerated.item[0]];
1883 if (old_ctl != new_ctl) {
1884 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, new_ctl);
1885 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
1886 ucontrol->value.enumerated.item[0] >= 3 ? 0xb080 : 0xb000);
1892 static int alc_test_pin_src_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
1894 static char *texts[] = {
1895 "Front", "Surround", "CLFE", "Side"
1897 uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
1899 uinfo->value.enumerated.items = 4;
1900 if (uinfo->value.enumerated.item >= 4)
1901 uinfo->value.enumerated.item = 3;
1902 strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
1906 static int alc_test_pin_src_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
1908 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
1909 hda_nid_t nid = (hda_nid_t)kcontrol->private_value;
1912 sel = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONNECT_SEL, 0);
1913 ucontrol->value.enumerated.item[0] = sel & 3;
1917 static int alc_test_pin_src_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
1919 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
1920 hda_nid_t nid = (hda_nid_t)kcontrol->private_value;
1923 sel = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONNECT_SEL, 0) & 3;
1924 if (ucontrol->value.enumerated.item[0] != sel) {
1925 sel = ucontrol->value.enumerated.item[0] & 3;
1926 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, sel);
1932 #define PIN_CTL_TEST(xname,nid) { \
1933 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
1935 .info = alc_test_pin_ctl_info, \
1936 .get = alc_test_pin_ctl_get, \
1937 .put = alc_test_pin_ctl_put, \
1938 .private_value = nid \
1941 #define PIN_SRC_TEST(xname,nid) { \
1942 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
1944 .info = alc_test_pin_src_info, \
1945 .get = alc_test_pin_src_get, \
1946 .put = alc_test_pin_src_put, \
1947 .private_value = nid \
1950 static struct snd_kcontrol_new alc880_test_mixer[] = {
1951 HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
1952 HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
1953 HDA_CODEC_VOLUME("CLFE Playback Volume", 0x0e, 0x0, HDA_OUTPUT),
1954 HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
1955 HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
1956 HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
1957 HDA_BIND_MUTE("CLFE Playback Switch", 0x0e, 2, HDA_INPUT),
1958 HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
1959 PIN_CTL_TEST("Front Pin Mode", 0x14),
1960 PIN_CTL_TEST("Surround Pin Mode", 0x15),
1961 PIN_CTL_TEST("CLFE Pin Mode", 0x16),
1962 PIN_CTL_TEST("Side Pin Mode", 0x17),
1963 PIN_CTL_TEST("In-1 Pin Mode", 0x18),
1964 PIN_CTL_TEST("In-2 Pin Mode", 0x19),
1965 PIN_CTL_TEST("In-3 Pin Mode", 0x1a),
1966 PIN_CTL_TEST("In-4 Pin Mode", 0x1b),
1967 PIN_SRC_TEST("In-1 Pin Source", 0x18),
1968 PIN_SRC_TEST("In-2 Pin Source", 0x19),
1969 PIN_SRC_TEST("In-3 Pin Source", 0x1a),
1970 PIN_SRC_TEST("In-4 Pin Source", 0x1b),
1971 HDA_CODEC_VOLUME("In-1 Playback Volume", 0x0b, 0x0, HDA_INPUT),
1972 HDA_CODEC_MUTE("In-1 Playback Switch", 0x0b, 0x0, HDA_INPUT),
1973 HDA_CODEC_VOLUME("In-2 Playback Volume", 0x0b, 0x1, HDA_INPUT),
1974 HDA_CODEC_MUTE("In-2 Playback Switch", 0x0b, 0x1, HDA_INPUT),
1975 HDA_CODEC_VOLUME("In-3 Playback Volume", 0x0b, 0x2, HDA_INPUT),
1976 HDA_CODEC_MUTE("In-3 Playback Switch", 0x0b, 0x2, HDA_INPUT),
1977 HDA_CODEC_VOLUME("In-4 Playback Volume", 0x0b, 0x3, HDA_INPUT),
1978 HDA_CODEC_MUTE("In-4 Playback Switch", 0x0b, 0x3, HDA_INPUT),
1979 HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x4, HDA_INPUT),
1980 HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x4, HDA_INPUT),
1982 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
1983 .name = "Channel Mode",
1984 .info = alc_ch_mode_info,
1985 .get = alc_ch_mode_get,
1986 .put = alc_ch_mode_put,
1991 static struct hda_verb alc880_test_init_verbs[] = {
1992 /* Unmute inputs of 0x0c - 0x0f */
1993 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
1994 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
1995 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
1996 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
1997 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
1998 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
1999 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
2000 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
2001 /* Vol output for 0x0c-0x0f */
2002 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
2003 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
2004 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
2005 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
2006 /* Set output pins 0x14-0x17 */
2007 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
2008 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
2009 {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
2010 {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
2011 /* Unmute output pins 0x14-0x17 */
2012 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
2013 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
2014 {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
2015 {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
2016 /* Set input pins 0x18-0x1c */
2017 {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
2018 {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
2019 {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
2020 {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
2021 {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
2022 /* Mute input pins 0x18-0x1b */
2023 {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
2024 {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
2025 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
2026 {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
2028 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
2029 {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
2030 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
2031 {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
2032 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
2033 {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
2034 /* Analog input/passthru */
2035 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
2036 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
2037 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
2038 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
2039 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
2047 static struct hda_board_config alc880_cfg_tbl[] = {
2048 /* Back 3 jack, front 2 jack */
2049 { .modelname = "3stack", .config = ALC880_3ST },
2050 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe200, .config = ALC880_3ST },
2051 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe201, .config = ALC880_3ST },
2052 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe202, .config = ALC880_3ST },
2053 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe203, .config = ALC880_3ST },
2054 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe204, .config = ALC880_3ST },
2055 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe205, .config = ALC880_3ST },
2056 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe206, .config = ALC880_3ST },
2057 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe207, .config = ALC880_3ST },
2058 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe208, .config = ALC880_3ST },
2059 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe209, .config = ALC880_3ST },
2060 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe20a, .config = ALC880_3ST },
2061 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe20b, .config = ALC880_3ST },
2062 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe20c, .config = ALC880_3ST },
2063 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe20d, .config = ALC880_3ST },
2064 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe20e, .config = ALC880_3ST },
2065 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe20f, .config = ALC880_3ST },
2066 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe210, .config = ALC880_3ST },
2067 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe211, .config = ALC880_3ST },
2068 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe214, .config = ALC880_3ST },
2069 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe302, .config = ALC880_3ST },
2070 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe303, .config = ALC880_3ST },
2071 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe304, .config = ALC880_3ST },
2072 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe306, .config = ALC880_3ST },
2073 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe307, .config = ALC880_3ST },
2074 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe404, .config = ALC880_3ST },
2075 { .pci_subvendor = 0x8086, .pci_subdevice = 0xa101, .config = ALC880_3ST },
2076 { .pci_subvendor = 0x107b, .pci_subdevice = 0x3031, .config = ALC880_3ST },
2077 { .pci_subvendor = 0x107b, .pci_subdevice = 0x4036, .config = ALC880_3ST },
2078 { .pci_subvendor = 0x107b, .pci_subdevice = 0x4037, .config = ALC880_3ST },
2079 { .pci_subvendor = 0x107b, .pci_subdevice = 0x4038, .config = ALC880_3ST },
2080 { .pci_subvendor = 0x107b, .pci_subdevice = 0x4040, .config = ALC880_3ST },
2081 { .pci_subvendor = 0x107b, .pci_subdevice = 0x4041, .config = ALC880_3ST },
2083 { .pci_subvendor = 0x19db, .pci_subdevice = 0x4188, .config = ALC880_TCL_S700 },
2085 /* Back 3 jack, front 2 jack (Internal add Aux-In) */
2086 { .pci_subvendor = 0x1025, .pci_subdevice = 0xe310, .config = ALC880_3ST },
2087 { .pci_subvendor = 0x104d, .pci_subdevice = 0x81d6, .config = ALC880_3ST },
2088 { .pci_subvendor = 0x104d, .pci_subdevice = 0x81a0, .config = ALC880_3ST },
2090 /* Back 3 jack plus 1 SPDIF out jack, front 2 jack */
2091 { .modelname = "3stack-digout", .config = ALC880_3ST_DIG },
2092 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe308, .config = ALC880_3ST_DIG },
2093 { .pci_subvendor = 0x1025, .pci_subdevice = 0x0070, .config = ALC880_3ST_DIG },
2094 /* Clevo m520G NB */
2095 { .pci_subvendor = 0x1558, .pci_subdevice = 0x0520, .config = ALC880_CLEVO },
2097 /* Back 3 jack plus 1 SPDIF out jack, front 2 jack (Internal add Aux-In)*/
2098 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe305, .config = ALC880_3ST_DIG },
2099 { .pci_subvendor = 0x8086, .pci_subdevice = 0xd402, .config = ALC880_3ST_DIG },
2100 { .pci_subvendor = 0x1025, .pci_subdevice = 0xe309, .config = ALC880_3ST_DIG },
2102 /* Back 5 jack, front 2 jack */
2103 { .modelname = "5stack", .config = ALC880_5ST },
2104 { .pci_subvendor = 0x107b, .pci_subdevice = 0x3033, .config = ALC880_5ST },
2105 { .pci_subvendor = 0x107b, .pci_subdevice = 0x4039, .config = ALC880_5ST },
2106 { .pci_subvendor = 0x107b, .pci_subdevice = 0x3032, .config = ALC880_5ST },
2107 { .pci_subvendor = 0x103c, .pci_subdevice = 0x2a09, .config = ALC880_5ST },
2108 { .pci_subvendor = 0x1043, .pci_subdevice = 0x814e, .config = ALC880_5ST },
2110 /* Back 5 jack plus 1 SPDIF out jack, front 2 jack */
2111 { .modelname = "5stack-digout", .config = ALC880_5ST_DIG },
2112 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe224, .config = ALC880_5ST_DIG },
2113 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe400, .config = ALC880_5ST_DIG },
2114 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe401, .config = ALC880_5ST_DIG },
2115 { .pci_subvendor = 0x8086, .pci_subdevice = 0xe402, .config = ALC880_5ST_DIG },
2116 { .pci_subvendor = 0x8086, .pci_subdevice = 0xd400, .config = ALC880_5ST_DIG },
2117 { .pci_subvendor = 0x8086, .pci_subdevice = 0xd401, .config = ALC880_5ST_DIG },
2118 { .pci_subvendor = 0x8086, .pci_subdevice = 0xa100, .config = ALC880_5ST_DIG },
2119 { .pci_subvendor = 0x1565, .pci_subdevice = 0x8202, .config = ALC880_5ST_DIG },
2120 { .pci_subvendor = 0x1019, .pci_subdevice = 0xa880, .config = ALC880_5ST_DIG },
2121 { .pci_subvendor = 0xa0a0, .pci_subdevice = 0x0560,
2122 .config = ALC880_5ST_DIG }, /* Aopen i915GMm-HFS */
2123 /* { .pci_subvendor = 0x1019, .pci_subdevice = 0xa884, .config = ALC880_5ST_DIG }, */ /* conflict with 6stack */
2124 { .pci_subvendor = 0x1695, .pci_subdevice = 0x400d, .config = ALC880_5ST_DIG },
2125 /* note subvendor = 0 below */
2126 /* { .pci_subvendor = 0x0000, .pci_subdevice = 0x8086, .config = ALC880_5ST_DIG }, */
2128 { .modelname = "w810", .config = ALC880_W810 },
2129 { .pci_subvendor = 0x161f, .pci_subdevice = 0x203d, .config = ALC880_W810 },
2131 { .modelname = "z71v", .config = ALC880_Z71V },
2132 { .pci_subvendor = 0x1043, .pci_subdevice = 0x1964, .config = ALC880_Z71V },
2134 { .modelname = "6stack", .config = ALC880_6ST },
2135 { .pci_subvendor = 0x1043, .pci_subdevice = 0x8196, .config = ALC880_6ST }, /* ASUS P5GD1-HVM */
2136 { .pci_subvendor = 0x1043, .pci_subdevice = 0x81b4, .config = ALC880_6ST },
2137 { .pci_subvendor = 0x1019, .pci_subdevice = 0xa884, .config = ALC880_6ST }, /* Acer APFV */
2138 { .pci_subvendor = 0x1458, .pci_subdevice = 0xa102, .config = ALC880_6ST }, /* Gigabyte K8N51 */
2140 { .modelname = "6stack-digout", .config = ALC880_6ST_DIG },
2141 { .pci_subvendor = 0x2668, .pci_subdevice = 0x8086, .config = ALC880_6ST_DIG },
2142 { .pci_subvendor = 0x8086, .pci_subdevice = 0x2668, .config = ALC880_6ST_DIG },
2143 { .pci_subvendor = 0x1462, .pci_subdevice = 0x1150, .config = ALC880_6ST_DIG },
2144 { .pci_subvendor = 0xe803, .pci_subdevice = 0x1019, .config = ALC880_6ST_DIG },
2145 { .pci_subvendor = 0x1039, .pci_subdevice = 0x1234, .config = ALC880_6ST_DIG },
2146 { .pci_subvendor = 0x1025, .pci_subdevice = 0x0077, .config = ALC880_6ST_DIG },
2147 { .pci_subvendor = 0x1025, .pci_subdevice = 0x0078, .config = ALC880_6ST_DIG },
2148 { .pci_subvendor = 0x1025, .pci_subdevice = 0x0087, .config = ALC880_6ST_DIG },
2149 { .pci_subvendor = 0x1297, .pci_subdevice = 0xc790, .config = ALC880_6ST_DIG }, /* Shuttle ST20G5 */
2150 { .pci_subvendor = 0x1509, .pci_subdevice = 0x925d, .config = ALC880_6ST_DIG }, /* FIC P4M-915GD1 */
2152 { .modelname = "asus", .config = ALC880_ASUS },
2153 { .pci_subvendor = 0x1043, .pci_subdevice = 0x1964, .config = ALC880_ASUS_DIG },
2154 { .pci_subvendor = 0x1043, .pci_subdevice = 0x1973, .config = ALC880_ASUS_DIG },
2155 { .pci_subvendor = 0x1043, .pci_subdevice = 0x19b3, .config = ALC880_ASUS_DIG },
2156 { .pci_subvendor = 0x1043, .pci_subdevice = 0x1113, .config = ALC880_ASUS_DIG },
2157 { .pci_subvendor = 0x1043, .pci_subdevice = 0x1173, .config = ALC880_ASUS_DIG },
2158 { .pci_subvendor = 0x1043, .pci_subdevice = 0x1993, .config = ALC880_ASUS },
2159 { .pci_subvendor = 0x1043, .pci_subdevice = 0x10c3, .config = ALC880_ASUS_DIG },
2160 { .pci_subvendor = 0x1043, .pci_subdevice = 0x1133, .config = ALC880_ASUS },
2161 { .pci_subvendor = 0x1043, .pci_subdevice = 0x1123, .config = ALC880_ASUS_DIG },
2162 { .pci_subvendor = 0x1043, .pci_subdevice = 0x1143, .config = ALC880_ASUS },
2163 { .pci_subvendor = 0x1043, .pci_subdevice = 0x10b3, .config = ALC880_ASUS_W1V },
2164 { .pci_subvendor = 0x1043, .pci_subdevice = 0x8181, .config = ALC880_ASUS_DIG }, /* ASUS P4GPL-X */
2165 { .pci_subvendor = 0x1558, .pci_subdevice = 0x5401, .config = ALC880_ASUS_DIG2 },
2167 { .modelname = "uniwill", .config = ALC880_UNIWILL_DIG },
2168 { .pci_subvendor = 0x1584, .pci_subdevice = 0x9050, .config = ALC880_UNIWILL_DIG },
2170 { .modelname = "F1734", .config = ALC880_F1734 },
2171 { .pci_subvendor = 0x1734, .pci_subdevice = 0x107c, .config = ALC880_F1734 },
2172 { .pci_subvendor = 0x1584, .pci_subdevice = 0x9054, .config = ALC880_F1734 },
2174 { .modelname = "lg", .config = ALC880_LG },
2175 { .pci_subvendor = 0x1854, .pci_subdevice = 0x003b, .config = ALC880_LG },
2177 { .modelname = "lg-lw", .config = ALC880_LG_LW },
2178 { .pci_subvendor = 0x1854, .pci_subdevice = 0x0018, .config = ALC880_LG_LW },
2180 #ifdef CONFIG_SND_DEBUG
2181 { .modelname = "test", .config = ALC880_TEST },
2183 { .modelname = "auto", .config = ALC880_AUTO },
2189 * ALC880 codec presets
2191 static struct alc_config_preset alc880_presets[] = {
2193 .mixers = { alc880_three_stack_mixer },
2194 .init_verbs = { alc880_volume_init_verbs, alc880_pin_3stack_init_verbs },
2195 .num_dacs = ARRAY_SIZE(alc880_dac_nids),
2196 .dac_nids = alc880_dac_nids,
2197 .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
2198 .channel_mode = alc880_threestack_modes,
2199 .input_mux = &alc880_capture_source,
2201 [ALC880_3ST_DIG] = {
2202 .mixers = { alc880_three_stack_mixer },
2203 .init_verbs = { alc880_volume_init_verbs, alc880_pin_3stack_init_verbs },
2204 .num_dacs = ARRAY_SIZE(alc880_dac_nids),
2205 .dac_nids = alc880_dac_nids,
2206 .dig_out_nid = ALC880_DIGOUT_NID,
2207 .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
2208 .channel_mode = alc880_threestack_modes,
2209 .input_mux = &alc880_capture_source,
2211 [ALC880_TCL_S700] = {
2212 .mixers = { alc880_tcl_s700_mixer },
2213 .init_verbs = { alc880_volume_init_verbs,
2214 alc880_pin_tcl_S700_init_verbs,
2215 alc880_gpio2_init_verbs },
2216 .num_dacs = ARRAY_SIZE(alc880_dac_nids),
2217 .dac_nids = alc880_dac_nids,
2219 .num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
2220 .channel_mode = alc880_2_jack_modes,
2221 .input_mux = &alc880_capture_source,
2224 .mixers = { alc880_three_stack_mixer, alc880_five_stack_mixer},
2225 .init_verbs = { alc880_volume_init_verbs, alc880_pin_5stack_init_verbs },
2226 .num_dacs = ARRAY_SIZE(alc880_dac_nids),
2227 .dac_nids = alc880_dac_nids,
2228 .num_channel_mode = ARRAY_SIZE(alc880_fivestack_modes),
2229 .channel_mode = alc880_fivestack_modes,
2230 .input_mux = &alc880_capture_source,
2232 [ALC880_5ST_DIG] = {
2233 .mixers = { alc880_three_stack_mixer, alc880_five_stack_mixer },
2234 .init_verbs = { alc880_volume_init_verbs, alc880_pin_5stack_init_verbs },
2235 .num_dacs = ARRAY_SIZE(alc880_dac_nids),
2236 .dac_nids = alc880_dac_nids,
2237 .dig_out_nid = ALC880_DIGOUT_NID,
2238 .num_channel_mode = ARRAY_SIZE(alc880_fivestack_modes),
2239 .channel_mode = alc880_fivestack_modes,
2240 .input_mux = &alc880_capture_source,
2243 .mixers = { alc880_six_stack_mixer },
2244 .init_verbs = { alc880_volume_init_verbs, alc880_pin_6stack_init_verbs },
2245 .num_dacs = ARRAY_SIZE(alc880_6st_dac_nids),
2246 .dac_nids = alc880_6st_dac_nids,
2247 .num_channel_mode = ARRAY_SIZE(alc880_sixstack_modes),
2248 .channel_mode = alc880_sixstack_modes,
2249 .input_mux = &alc880_6stack_capture_source,
2251 [ALC880_6ST_DIG] = {
2252 .mixers = { alc880_six_stack_mixer },
2253 .init_verbs = { alc880_volume_init_verbs, alc880_pin_6stack_init_verbs },
2254 .num_dacs = ARRAY_SIZE(alc880_6st_dac_nids),
2255 .dac_nids = alc880_6st_dac_nids,
2256 .dig_out_nid = ALC880_DIGOUT_NID,
2257 .num_channel_mode = ARRAY_SIZE(alc880_sixstack_modes),
2258 .channel_mode = alc880_sixstack_modes,
2259 .input_mux = &alc880_6stack_capture_source,
2262 .mixers = { alc880_w810_base_mixer },
2263 .init_verbs = { alc880_volume_init_verbs, alc880_pin_w810_init_verbs,
2264 alc880_gpio2_init_verbs },
2265 .num_dacs = ARRAY_SIZE(alc880_w810_dac_nids),
2266 .dac_nids = alc880_w810_dac_nids,
2267 .dig_out_nid = ALC880_DIGOUT_NID,
2268 .num_channel_mode = ARRAY_SIZE(alc880_w810_modes),
2269 .channel_mode = alc880_w810_modes,
2270 .input_mux = &alc880_capture_source,
2273 .mixers = { alc880_z71v_mixer },
2274 .init_verbs = { alc880_volume_init_verbs, alc880_pin_z71v_init_verbs },
2275 .num_dacs = ARRAY_SIZE(alc880_z71v_dac_nids),
2276 .dac_nids = alc880_z71v_dac_nids,
2277 .dig_out_nid = ALC880_DIGOUT_NID,
2279 .num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
2280 .channel_mode = alc880_2_jack_modes,
2281 .input_mux = &alc880_capture_source,
2284 .mixers = { alc880_f1734_mixer },
2285 .init_verbs = { alc880_volume_init_verbs, alc880_pin_f1734_init_verbs },
2286 .num_dacs = ARRAY_SIZE(alc880_f1734_dac_nids),
2287 .dac_nids = alc880_f1734_dac_nids,
2289 .num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
2290 .channel_mode = alc880_2_jack_modes,
2291 .input_mux = &alc880_capture_source,
2294 .mixers = { alc880_asus_mixer },
2295 .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
2296 alc880_gpio1_init_verbs },
2297 .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
2298 .dac_nids = alc880_asus_dac_nids,
2299 .num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
2300 .channel_mode = alc880_asus_modes,
2301 .input_mux = &alc880_capture_source,
2303 [ALC880_ASUS_DIG] = {
2304 .mixers = { alc880_asus_mixer },
2305 .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
2306 alc880_gpio1_init_verbs },
2307 .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
2308 .dac_nids = alc880_asus_dac_nids,
2309 .dig_out_nid = ALC880_DIGOUT_NID,
2310 .num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
2311 .channel_mode = alc880_asus_modes,
2312 .input_mux = &alc880_capture_source,
2314 [ALC880_ASUS_DIG2] = {
2315 .mixers = { alc880_asus_mixer },
2316 .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
2317 alc880_gpio2_init_verbs }, /* use GPIO2 */
2318 .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
2319 .dac_nids = alc880_asus_dac_nids,
2320 .dig_out_nid = ALC880_DIGOUT_NID,
2321 .num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
2322 .channel_mode = alc880_asus_modes,
2323 .input_mux = &alc880_capture_source,
2325 [ALC880_ASUS_W1V] = {
2326 .mixers = { alc880_asus_mixer, alc880_asus_w1v_mixer },
2327 .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
2328 alc880_gpio1_init_verbs },
2329 .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
2330 .dac_nids = alc880_asus_dac_nids,
2331 .dig_out_nid = ALC880_DIGOUT_NID,
2332 .num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
2333 .channel_mode = alc880_asus_modes,
2334 .input_mux = &alc880_capture_source,
2336 [ALC880_UNIWILL_DIG] = {
2337 .mixers = { alc880_asus_mixer, alc880_pcbeep_mixer },
2338 .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs },
2339 .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
2340 .dac_nids = alc880_asus_dac_nids,
2341 .dig_out_nid = ALC880_DIGOUT_NID,
2342 .num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
2343 .channel_mode = alc880_asus_modes,
2344 .input_mux = &alc880_capture_source,
2347 .mixers = { alc880_three_stack_mixer },
2348 .init_verbs = { alc880_volume_init_verbs,
2349 alc880_pin_clevo_init_verbs },
2350 .num_dacs = ARRAY_SIZE(alc880_dac_nids),
2351 .dac_nids = alc880_dac_nids,
2353 .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
2354 .channel_mode = alc880_threestack_modes,
2355 .input_mux = &alc880_capture_source,
2358 .mixers = { alc880_lg_mixer },
2359 .init_verbs = { alc880_volume_init_verbs,
2360 alc880_lg_init_verbs },
2361 .num_dacs = ARRAY_SIZE(alc880_lg_dac_nids),
2362 .dac_nids = alc880_lg_dac_nids,
2363 .dig_out_nid = ALC880_DIGOUT_NID,
2364 .num_channel_mode = ARRAY_SIZE(alc880_lg_ch_modes),
2365 .channel_mode = alc880_lg_ch_modes,
2366 .input_mux = &alc880_lg_capture_source,
2367 .unsol_event = alc880_lg_unsol_event,
2368 .init_hook = alc880_lg_automute,
2371 .mixers = { alc880_lg_lw_mixer },
2372 .init_verbs = { alc880_volume_init_verbs,
2373 alc880_lg_lw_init_verbs },
2375 .dac_nids = alc880_dac_nids,
2376 .dig_out_nid = ALC880_DIGOUT_NID,
2377 .num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
2378 .channel_mode = alc880_2_jack_modes,
2379 .input_mux = &alc880_lg_lw_capture_source,
2380 .unsol_event = alc880_lg_lw_unsol_event,
2381 .init_hook = alc880_lg_lw_automute,
2383 #ifdef CONFIG_SND_DEBUG
2385 .mixers = { alc880_test_mixer },
2386 .init_verbs = { alc880_test_init_verbs },
2387 .num_dacs = ARRAY_SIZE(alc880_test_dac_nids),
2388 .dac_nids = alc880_test_dac_nids,
2389 .dig_out_nid = ALC880_DIGOUT_NID,
2390 .num_channel_mode = ARRAY_SIZE(alc880_test_modes),
2391 .channel_mode = alc880_test_modes,
2392 .input_mux = &alc880_test_capture_source,
2398 * Automatic parse of I/O pins from the BIOS configuration
2401 #define NUM_CONTROL_ALLOC 32
2402 #define NUM_VERB_ALLOC 32
2406 ALC_CTL_WIDGET_MUTE,
2409 static struct snd_kcontrol_new alc880_control_templates[] = {
2410 HDA_CODEC_VOLUME(NULL, 0, 0, 0),
2411 HDA_CODEC_MUTE(NULL, 0, 0, 0),
2412 HDA_BIND_MUTE(NULL, 0, 0, 0),
2415 /* add dynamic controls */
2416 static int add_control(struct alc_spec *spec, int type, const char *name, unsigned long val)
2418 struct snd_kcontrol_new *knew;
2420 if (spec->num_kctl_used >= spec->num_kctl_alloc) {
2421 int num = spec->num_kctl_alloc + NUM_CONTROL_ALLOC;
2423 knew = kcalloc(num + 1, sizeof(*knew), GFP_KERNEL); /* array + terminator */
2426 if (spec->kctl_alloc) {
2427 memcpy(knew, spec->kctl_alloc, sizeof(*knew) * spec->num_kctl_alloc);
2428 kfree(spec->kctl_alloc);
2430 spec->kctl_alloc = knew;
2431 spec->num_kctl_alloc = num;
2434 knew = &spec->kctl_alloc[spec->num_kctl_used];
2435 *knew = alc880_control_templates[type];
2436 knew->name = kstrdup(name, GFP_KERNEL);
2439 knew->private_value = val;
2440 spec->num_kctl_used++;
2444 #define alc880_is_fixed_pin(nid) ((nid) >= 0x14 && (nid) <= 0x17)
2445 #define alc880_fixed_pin_idx(nid) ((nid) - 0x14)
2446 #define alc880_is_multi_pin(nid) ((nid) >= 0x18)
2447 #define alc880_multi_pin_idx(nid) ((nid) - 0x18)
2448 #define alc880_is_input_pin(nid) ((nid) >= 0x18)
2449 #define alc880_input_pin_idx(nid) ((nid) - 0x18)
2450 #define alc880_idx_to_dac(nid) ((nid) + 0x02)
2451 #define alc880_dac_to_idx(nid) ((nid) - 0x02)
2452 #define alc880_idx_to_mixer(nid) ((nid) + 0x0c)
2453 #define alc880_idx_to_selector(nid) ((nid) + 0x10)
2454 #define ALC880_PIN_CD_NID 0x1c
2456 /* fill in the dac_nids table from the parsed pin configuration */
2457 static int alc880_auto_fill_dac_nids(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
2463 memset(assigned, 0, sizeof(assigned));
2464 spec->multiout.dac_nids = spec->private_dac_nids;
2466 /* check the pins hardwired to audio widget */
2467 for (i = 0; i < cfg->line_outs; i++) {
2468 nid = cfg->line_out_pins[i];
2469 if (alc880_is_fixed_pin(nid)) {
2470 int idx = alc880_fixed_pin_idx(nid);
2471 spec->multiout.dac_nids[i] = alc880_idx_to_dac(idx);
2475 /* left pins can be connect to any audio widget */
2476 for (i = 0; i < cfg->line_outs; i++) {
2477 nid = cfg->line_out_pins[i];
2478 if (alc880_is_fixed_pin(nid))
2480 /* search for an empty channel */
2481 for (j = 0; j < cfg->line_outs; j++) {
2482 if (! assigned[j]) {
2483 spec->multiout.dac_nids[i] = alc880_idx_to_dac(j);
2489 spec->multiout.num_dacs = cfg->line_outs;
2493 /* add playback controls from the parsed DAC table */
2494 static int alc880_auto_create_multi_out_ctls(struct alc_spec *spec,
2495 const struct auto_pin_cfg *cfg)
2498 static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" };
2502 for (i = 0; i < cfg->line_outs; i++) {
2503 if (! spec->multiout.dac_nids[i])
2505 nid = alc880_idx_to_mixer(alc880_dac_to_idx(spec->multiout.dac_nids[i]));
2508 if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Center Playback Volume",
2509 HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT))) < 0)
2511 if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "LFE Playback Volume",
2512 HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
2514 if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Center Playback Switch",
2515 HDA_COMPOSE_AMP_VAL(nid, 1, 2, HDA_INPUT))) < 0)
2517 if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "LFE Playback Switch",
2518 HDA_COMPOSE_AMP_VAL(nid, 2, 2, HDA_INPUT))) < 0)
2521 sprintf(name, "%s Playback Volume", chname[i]);
2522 if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
2523 HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
2525 sprintf(name, "%s Playback Switch", chname[i]);
2526 if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name,
2527 HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT))) < 0)
2534 /* add playback controls for speaker and HP outputs */
2535 static int alc880_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin,
2545 if (alc880_is_fixed_pin(pin)) {
2546 nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
2547 /* specify the DAC as the extra output */
2548 if (! spec->multiout.hp_nid)
2549 spec->multiout.hp_nid = nid;
2551 spec->multiout.extra_out_nid[0] = nid;
2552 /* control HP volume/switch on the output mixer amp */
2553 nid = alc880_idx_to_mixer(alc880_fixed_pin_idx(pin));
2554 sprintf(name, "%s Playback Volume", pfx);
2555 if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
2556 HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
2558 sprintf(name, "%s Playback Switch", pfx);
2559 if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name,
2560 HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT))) < 0)
2562 } else if (alc880_is_multi_pin(pin)) {
2563 /* set manual connection */
2564 /* we have only a switch on HP-out PIN */
2565 sprintf(name, "%s Playback Switch", pfx);
2566 if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
2567 HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT))) < 0)
2573 /* create input playback/capture controls for the given pin */
2574 static int new_analog_input(struct alc_spec *spec, hda_nid_t pin, const char *ctlname,
2575 int idx, hda_nid_t mix_nid)
2580 sprintf(name, "%s Playback Volume", ctlname);
2581 if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
2582 HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT))) < 0)
2584 sprintf(name, "%s Playback Switch", ctlname);
2585 if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
2586 HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT))) < 0)
2591 /* create playback/capture controls for input pins */
2592 static int alc880_auto_create_analog_input_ctls(struct alc_spec *spec,
2593 const struct auto_pin_cfg *cfg)
2595 struct hda_input_mux *imux = &spec->private_imux;
2598 for (i = 0; i < AUTO_PIN_LAST; i++) {
2599 if (alc880_is_input_pin(cfg->input_pins[i])) {
2600 idx = alc880_input_pin_idx(cfg->input_pins[i]);
2601 err = new_analog_input(spec, cfg->input_pins[i],
2602 auto_pin_cfg_labels[i],
2606 imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
2607 imux->items[imux->num_items].index = alc880_input_pin_idx(cfg->input_pins[i]);
2614 static void alc880_auto_set_output_and_unmute(struct hda_codec *codec,
2615 hda_nid_t nid, int pin_type,
2619 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
2620 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
2621 /* need the manual connection? */
2622 if (alc880_is_multi_pin(nid)) {
2623 struct alc_spec *spec = codec->spec;
2624 int idx = alc880_multi_pin_idx(nid);
2625 snd_hda_codec_write(codec, alc880_idx_to_selector(idx), 0,
2626 AC_VERB_SET_CONNECT_SEL,
2627 alc880_dac_to_idx(spec->multiout.dac_nids[dac_idx]));
2631 static void alc880_auto_init_multi_out(struct hda_codec *codec)
2633 struct alc_spec *spec = codec->spec;
2636 for (i = 0; i < spec->autocfg.line_outs; i++) {
2637 hda_nid_t nid = spec->autocfg.line_out_pins[i];
2638 alc880_auto_set_output_and_unmute(codec, nid, PIN_OUT, i);
2642 static void alc880_auto_init_extra_out(struct hda_codec *codec)
2644 struct alc_spec *spec = codec->spec;
2647 pin = spec->autocfg.speaker_pins[0];
2648 if (pin) /* connect to front */
2649 alc880_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
2650 pin = spec->autocfg.hp_pin;
2651 if (pin) /* connect to front */
2652 alc880_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
2655 static void alc880_auto_init_analog_input(struct hda_codec *codec)
2657 struct alc_spec *spec = codec->spec;
2660 for (i = 0; i < AUTO_PIN_LAST; i++) {
2661 hda_nid_t nid = spec->autocfg.input_pins[i];
2662 if (alc880_is_input_pin(nid)) {
2663 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
2664 i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
2665 if (nid != ALC880_PIN_CD_NID)
2666 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
2672 /* parse the BIOS configuration and set up the alc_spec */
2673 /* return 1 if successful, 0 if the proper config is not found, or a negative error code */
2674 static int alc880_parse_auto_config(struct hda_codec *codec)
2676 struct alc_spec *spec = codec->spec;
2678 static hda_nid_t alc880_ignore[] = { 0x1d, 0 };
2680 if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
2681 alc880_ignore)) < 0)
2683 if (! spec->autocfg.line_outs)
2684 return 0; /* can't find valid BIOS pin config */
2686 if ((err = alc880_auto_fill_dac_nids(spec, &spec->autocfg)) < 0 ||
2687 (err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
2688 (err = alc880_auto_create_extra_out(spec,
2689 spec->autocfg.speaker_pins[0],
2691 (err = alc880_auto_create_extra_out(spec, spec->autocfg.hp_pin,
2692 "Headphone")) < 0 ||
2693 (err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
2696 spec->multiout.max_channels = spec->multiout.num_dacs * 2;
2698 if (spec->autocfg.dig_out_pin)
2699 spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
2700 if (spec->autocfg.dig_in_pin)
2701 spec->dig_in_nid = ALC880_DIGIN_NID;
2703 if (spec->kctl_alloc)
2704 spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
2706 spec->init_verbs[spec->num_init_verbs++] = alc880_volume_init_verbs;
2708 spec->num_mux_defs = 1;
2709 spec->input_mux = &spec->private_imux;
2714 /* additional initialization for auto-configuration model */
2715 static void alc880_auto_init(struct hda_codec *codec)
2717 alc880_auto_init_multi_out(codec);
2718 alc880_auto_init_extra_out(codec);
2719 alc880_auto_init_analog_input(codec);
2723 * OK, here we have finally the patch for ALC880
2726 static int patch_alc880(struct hda_codec *codec)
2728 struct alc_spec *spec;
2732 spec = kzalloc(sizeof(*spec), GFP_KERNEL);
2738 board_config = snd_hda_check_board_config(codec, alc880_cfg_tbl);
2739 if (board_config < 0 || board_config >= ALC880_MODEL_LAST) {
2740 printk(KERN_INFO "hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...\n");
2741 board_config = ALC880_AUTO;
2744 if (board_config == ALC880_AUTO) {
2745 /* automatic parse from the BIOS config */
2746 err = alc880_parse_auto_config(codec);
2751 printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using 3-stack mode...\n");
2752 board_config = ALC880_3ST;
2756 if (board_config != ALC880_AUTO)
2757 setup_preset(spec, &alc880_presets[board_config]);
2759 spec->stream_name_analog = "ALC880 Analog";
2760 spec->stream_analog_playback = &alc880_pcm_analog_playback;
2761 spec->stream_analog_capture = &alc880_pcm_analog_capture;
2763 spec->stream_name_digital = "ALC880 Digital";
2764 spec->stream_digital_playback = &alc880_pcm_digital_playback;
2765 spec->stream_digital_capture = &alc880_pcm_digital_capture;
2767 if (! spec->adc_nids && spec->input_mux) {
2768 /* check whether NID 0x07 is valid */
2769 unsigned int wcap = get_wcaps(codec, alc880_adc_nids[0]);
2770 wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
2771 if (wcap != AC_WID_AUD_IN) {
2772 spec->adc_nids = alc880_adc_nids_alt;
2773 spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids_alt);
2774 spec->mixers[spec->num_mixers] = alc880_capture_alt_mixer;
2777 spec->adc_nids = alc880_adc_nids;
2778 spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids);
2779 spec->mixers[spec->num_mixers] = alc880_capture_mixer;
2784 codec->patch_ops = alc_patch_ops;
2785 if (board_config == ALC880_AUTO)
2786 spec->init_hook = alc880_auto_init;
2796 static hda_nid_t alc260_dac_nids[1] = {
2801 static hda_nid_t alc260_adc_nids[1] = {
2806 static hda_nid_t alc260_adc_nids_alt[1] = {
2811 static hda_nid_t alc260_hp_adc_nids[2] = {
2816 /* NIDs used when simultaneous access to both ADCs makes sense. Note that
2817 * alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC.
2819 static hda_nid_t alc260_dual_adc_nids[2] = {
2824 #define ALC260_DIGOUT_NID 0x03
2825 #define ALC260_DIGIN_NID 0x06
2827 static struct hda_input_mux alc260_capture_source = {
2831 { "Front Mic", 0x1 },
2837 /* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack,
2838 * headphone jack and the internal CD lines since these are the only pins at
2839 * which audio can appear. For flexibility, also allow the option of
2840 * recording the mixer output on the second ADC (ADC0 doesn't have a
2841 * connection to the mixer output).
2843 static struct hda_input_mux alc260_fujitsu_capture_sources[2] = {
2847 { "Mic/Line", 0x0 },
2849 { "Headphone", 0x2 },
2855 { "Mic/Line", 0x0 },
2857 { "Headphone", 0x2 },
2864 /* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to
2865 * the Fujitsu S702x, but jacks are marked differently.
2867 static struct hda_input_mux alc260_acer_capture_sources[2] = {
2874 { "Headphone", 0x5 },
2883 { "Headphone", 0x6 },
2889 * This is just place-holder, so there's something for alc_build_pcms to look
2890 * at when it calculates the maximum number of channels. ALC260 has no mixer
2891 * element which allows changing the channel mode, so the verb list is
2894 static struct hda_channel_mode alc260_modes[1] = {
2899 /* Mixer combinations
2901 * basic: base_output + input + pc_beep + capture
2902 * HP: base_output + input + capture_alt
2903 * HP_3013: hp_3013 + input + capture
2904 * fujitsu: fujitsu + capture
2905 * acer: acer + capture
2908 static struct snd_kcontrol_new alc260_base_output_mixer[] = {
2909 HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
2910 HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
2911 HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
2912 HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
2913 HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
2914 HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
2918 static struct snd_kcontrol_new alc260_input_mixer[] = {
2919 HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
2920 HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
2921 HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
2922 HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
2923 HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
2924 HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
2925 HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
2926 HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
2930 static struct snd_kcontrol_new alc260_pc_beep_mixer[] = {
2931 HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x07, 0x05, HDA_INPUT),
2932 HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x07, 0x05, HDA_INPUT),
2936 static struct snd_kcontrol_new alc260_hp_3013_mixer[] = {
2937 HDA_CODEC_VOLUME("Front Playback Volume", 0x09, 0x0, HDA_OUTPUT),
2938 HDA_CODEC_MUTE("Front Playback Switch", 0x10, 0x0, HDA_OUTPUT),
2939 HDA_CODEC_VOLUME("Aux-In Playback Volume", 0x07, 0x06, HDA_INPUT),
2940 HDA_CODEC_MUTE("Aux-In Playback Switch", 0x07, 0x06, HDA_INPUT),
2941 HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
2942 HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
2943 HDA_CODEC_VOLUME_MONO("iSpeaker Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
2944 HDA_CODEC_MUTE_MONO("iSpeaker Playback Switch", 0x11, 1, 0x0, HDA_OUTPUT),
2948 /* Fujitsu S702x series laptops. ALC260 pin usage: Mic/Line jack = 0x12,
2949 * HP jack = 0x14, CD audio = 0x16, internal speaker = 0x10.
2951 static struct snd_kcontrol_new alc260_fujitsu_mixer[] = {
2952 HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
2953 HDA_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT),
2954 ALC_PIN_MODE("Headphone Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
2955 HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
2956 HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
2957 HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT),
2958 HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT),
2959 ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN),
2960 HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT),
2961 HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT),
2962 HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
2963 HDA_BIND_MUTE("Internal Speaker Playback Switch", 0x09, 2, HDA_INPUT),
2967 /* Mixer for Acer TravelMate(/Extensa/Aspire) notebooks. Note that current
2968 * versions of the ALC260 don't act on requests to enable mic bias from NID
2969 * 0x0f (used to drive the headphone jack in these laptops). The ALC260
2970 * datasheet doesn't mention this restriction. At this stage it's not clear
2971 * whether this behaviour is intentional or is a hardware bug in chip
2972 * revisions available in early 2006. Therefore for now allow the
2973 * "Headphone Jack Mode" control to span all choices, but if it turns out
2974 * that the lack of mic bias for this NID is intentional we could change the
2975 * mode from ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
2977 * In addition, Acer TravelMate(/Extensa/Aspire) notebooks in early 2006
2978 * don't appear to make the mic bias available from the "line" jack, even
2979 * though the NID used for this jack (0x14) can supply it. The theory is
2980 * that perhaps Acer have included blocking capacitors between the ALC260
2981 * and the output jack. If this turns out to be the case for all such
2982 * models the "Line Jack Mode" mode could be changed from ALC_PIN_DIR_INOUT
2983 * to ALC_PIN_DIR_INOUT_NOMICBIAS.
2985 static struct snd_kcontrol_new alc260_acer_mixer[] = {
2986 HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
2987 HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
2988 ALC_PIN_MODE("Headphone Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
2989 HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
2990 HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
2991 HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
2992 HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
2993 ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
2994 HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
2995 HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
2996 ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
2997 HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT),
2998 HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT),
3002 /* capture mixer elements */
3003 static struct snd_kcontrol_new alc260_capture_mixer[] = {
3004 HDA_CODEC_VOLUME("Capture Volume", 0x04, 0x0, HDA_INPUT),
3005 HDA_CODEC_MUTE("Capture Switch", 0x04, 0x0, HDA_INPUT),
3006 HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x05, 0x0, HDA_INPUT),
3007 HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x05, 0x0, HDA_INPUT),
3009 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
3010 /* The multiple "Capture Source" controls confuse alsamixer
3011 * So call somewhat different..
3012 * FIXME: the controls appear in the "playback" view!
3014 /* .name = "Capture Source", */
3015 .name = "Input Source",
3017 .info = alc_mux_enum_info,
3018 .get = alc_mux_enum_get,
3019 .put = alc_mux_enum_put,
3024 static struct snd_kcontrol_new alc260_capture_alt_mixer[] = {
3025 HDA_CODEC_VOLUME("Capture Volume", 0x05, 0x0, HDA_INPUT),
3026 HDA_CODEC_MUTE("Capture Switch", 0x05, 0x0, HDA_INPUT),
3028 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
3029 /* The multiple "Capture Source" controls confuse alsamixer
3030 * So call somewhat different..
3031 * FIXME: the controls appear in the "playback" view!
3033 /* .name = "Capture Source", */
3034 .name = "Input Source",
3036 .info = alc_mux_enum_info,
3037 .get = alc_mux_enum_get,
3038 .put = alc_mux_enum_put,
3044 * initialization verbs
3046 static struct hda_verb alc260_init_verbs[] = {
3047 /* Line In pin widget for input */
3048 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
3049 /* CD pin widget for input */
3050 {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
3051 /* Mic1 (rear panel) pin widget for input and vref at 80% */
3052 {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
3053 /* Mic2 (front panel) pin widget for input and vref at 80% */
3054 {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
3055 /* LINE-2 is used for line-out in rear */
3056 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
3057 /* select line-out */
3058 {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
3060 {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
3062 {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
3064 {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
3065 /* mute capture amp left and right */
3066 {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
3067 /* set connection select to line in (default select for this ADC) */
3068 {0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
3069 /* mute capture amp left and right */
3070 {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
3071 /* set connection select to line in (default select for this ADC) */
3072 {0x05, AC_VERB_SET_CONNECT_SEL, 0x02},
3073 /* set vol=0 Line-Out mixer amp left and right */
3074 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
3075 /* unmute pin widget amp left and right (no gain on this amp) */
3076 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
3077 /* set vol=0 HP mixer amp left and right */
3078 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
3079 /* unmute pin widget amp left and right (no gain on this amp) */
3080 {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
3081 /* set vol=0 Mono mixer amp left and right */
3082 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
3083 /* unmute pin widget amp left and right (no gain on this amp) */
3084 {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
3085 /* unmute LINE-2 out pin */
3086 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
3087 /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
3089 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
3091 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
3093 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
3094 /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
3095 /* mute Front out path */
3096 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3097 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
3098 /* mute Headphone out path */
3099 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3100 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
3101 /* mute Mono out path */
3102 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3103 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
3107 static struct hda_verb alc260_hp_init_verbs[] = {
3108 /* Headphone and output */
3109 {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
3111 {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
3112 /* Mic1 (rear panel) pin widget for input and vref at 80% */
3113 {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
3114 /* Mic2 (front panel) pin widget for input and vref at 80% */
3115 {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
3116 /* Line In pin widget for input */
3117 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
3118 /* Line-2 pin widget for output */
3119 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
3120 /* CD pin widget for input */
3121 {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
3122 /* unmute amp left and right */
3123 {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
3124 /* set connection select to line in (default select for this ADC) */
3125 {0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
3126 /* unmute Line-Out mixer amp left and right (volume = 0) */
3127 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
3128 /* mute pin widget amp left and right (no gain on this amp) */
3129 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
3130 /* unmute HP mixer amp left and right (volume = 0) */
3131 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
3132 /* mute pin widget amp left and right (no gain on this amp) */
3133 {0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
3134 /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
3136 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
3137 /* unmute Line In */
3138 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
3140 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
3141 /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
3142 /* Unmute Front out path */
3143 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
3144 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
3145 /* Unmute Headphone out path */
3146 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
3147 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
3148 /* Unmute Mono out path */
3149 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
3150 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
3154 static struct hda_verb alc260_hp_3013_init_verbs[] = {
3155 /* Line out and output */
3156 {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
3158 {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
3159 /* Mic1 (rear panel) pin widget for input and vref at 80% */
3160 {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
3161 /* Mic2 (front panel) pin widget for input and vref at 80% */
3162 {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
3163 /* Line In pin widget for input */
3164 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
3165 /* Headphone pin widget for output */
3166 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
3167 /* CD pin widget for input */
3168 {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
3169 /* unmute amp left and right */
3170 {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000},
3171 /* set connection select to line in (default select for this ADC) */
3172 {0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
3173 /* unmute Line-Out mixer amp left and right (volume = 0) */
3174 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
3175 /* mute pin widget amp left and right (no gain on this amp) */
3176 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
3177 /* unmute HP mixer amp left and right (volume = 0) */
3178 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
3179 /* mute pin widget amp left and right (no gain on this amp) */
3180 {0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
3181 /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
3183 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
3184 /* unmute Line In */
3185 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
3187 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
3188 /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
3189 /* Unmute Front out path */
3190 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
3191 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
3192 /* Unmute Headphone out path */
3193 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
3194 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
3195 /* Unmute Mono out path */
3196 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
3197 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
3201 /* Initialisation sequence for ALC260 as configured in Fujitsu S702x
3202 * laptops. ALC260 pin usage: Mic/Line jack = 0x12, HP jack = 0x14, CD
3203 * audio = 0x16, internal speaker = 0x10.
3205 static struct hda_verb alc260_fujitsu_init_verbs[] = {
3206 /* Disable all GPIOs */
3207 {0x01, AC_VERB_SET_GPIO_MASK, 0},
3208 /* Internal speaker is connected to headphone pin */
3209 {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
3210 /* Headphone/Line-out jack connects to Line1 pin; make it an output */
3211 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
3212 /* Mic/Line-in jack is connected to mic1 pin, so make it an input */
3213 {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
3214 /* Ensure all other unused pins are disabled and muted. */
3215 {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
3216 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3217 {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
3218 {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3219 {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
3220 {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3221 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
3222 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3224 /* Disable digital (SPDIF) pins */
3225 {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
3226 {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
3228 /* Ensure Line1 pin widget takes its input from the OUT1 sum bus
3229 * when acting as an output.
3231 {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
3233 /* Start with output sum widgets muted and their output gains at min */
3234 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3235 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
3236 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
3237 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3238 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
3239 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
3240 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3241 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
3242 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
3244 /* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */
3245 {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
3246 /* Unmute Line1 pin widget output buffer since it starts as an output.
3247 * If the pin mode is changed by the user the pin mode control will
3248 * take care of enabling the pin's input/output buffers as needed.
3249 * Therefore there's no need to enable the input buffer at this
3252 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
3253 /* Unmute input buffer of pin widget used for Line-in (no equiv
3256 {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
3258 /* Mute capture amp left and right */
3259 {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3260 /* Set ADC connection select to match default mixer setting - line
3263 {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
3265 /* Do the same for the second ADC: mute capture input amp and
3266 * set ADC connection to line in (on mic1 pin)
3268 {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3269 {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
3271 /* Mute all inputs to mixer widget (even unconnected ones) */
3272 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
3273 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
3274 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
3275 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
3276 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
3277 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
3278 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
3279 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
3284 /* Initialisation sequence for ALC260 as configured in Acer TravelMate and
3285 * similar laptops (adapted from Fujitsu init verbs).
3287 static struct hda_verb alc260_acer_init_verbs[] = {
3288 /* On TravelMate laptops, GPIO 0 enables the internal speaker and
3289 * the headphone jack. Turn this on and rely on the standard mute
3290 * methods whenever the user wants to turn these outputs off.
3292 {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
3293 {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
3294 {0x01, AC_VERB_SET_GPIO_DATA, 0x01},
3295 /* Internal speaker/Headphone jack is connected to Line-out pin */
3296 {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
3297 /* Internal microphone/Mic jack is connected to Mic1 pin */
3298 {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
3299 /* Line In jack is connected to Line1 pin */
3300 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
3301 /* Ensure all other unused pins are disabled and muted. */
3302 {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
3303 {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3304 {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
3305 {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3306 {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
3307 {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3308 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
3309 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3310 /* Disable digital (SPDIF) pins */
3311 {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
3312 {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
3314 /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
3315 * bus when acting as outputs.
3317 {0x0b, AC_VERB_SET_CONNECT_SEL, 0},
3318 {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
3320 /* Start with output sum widgets muted and their output gains at min */
3321 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3322 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
3323 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
3324 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3325 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
3326 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
3327 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3328 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
3329 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
3331 /* Unmute Line-out pin widget amp left and right (no equiv mixer ctrl) */
3332 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
3333 /* Unmute Mic1 and Line1 pin widget input buffers since they start as
3334 * inputs. If the pin mode is changed by the user the pin mode control
3335 * will take care of enabling the pin's input/output buffers as needed.
3336 * Therefore there's no need to enable the input buffer at this
3339 {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
3340 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
3342 /* Mute capture amp left and right */
3343 {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3344 /* Set ADC connection select to match default mixer setting - mic
3347 {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
3349 /* Do similar with the second ADC: mute capture input amp and
3350 * set ADC connection to mic to match ALSA's default state.
3352 {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3353 {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
3355 /* Mute all inputs to mixer widget (even unconnected ones) */
3356 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
3357 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
3358 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
3359 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
3360 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
3361 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
3362 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
3363 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
3368 /* Test configuration for debugging, modelled after the ALC880 test
3371 #ifdef CONFIG_SND_DEBUG
3372 static hda_nid_t alc260_test_dac_nids[1] = {
3375 static hda_nid_t alc260_test_adc_nids[2] = {
3378 /* For testing the ALC260, each input MUX needs its own definition since
3379 * the signal assignments are different. This assumes that the first ADC
3382 static struct hda_input_mux alc260_test_capture_sources[2] = {
3386 { "MIC1 pin", 0x0 },
3387 { "MIC2 pin", 0x1 },
3388 { "LINE1 pin", 0x2 },
3389 { "LINE2 pin", 0x3 },
3391 { "LINE-OUT pin", 0x5 },
3392 { "HP-OUT pin", 0x6 },
3398 { "MIC1 pin", 0x0 },
3399 { "MIC2 pin", 0x1 },
3400 { "LINE1 pin", 0x2 },
3401 { "LINE2 pin", 0x3 },
3404 { "LINE-OUT pin", 0x6 },
3405 { "HP-OUT pin", 0x7 },
3409 static struct snd_kcontrol_new alc260_test_mixer[] = {
3410 /* Output driver widgets */
3411 HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
3412 HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
3413 HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x09, 0x0, HDA_OUTPUT),
3414 HDA_BIND_MUTE("LOUT2 Playback Switch", 0x09, 2, HDA_INPUT),
3415 HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x08, 0x0, HDA_OUTPUT),
3416 HDA_BIND_MUTE("LOUT1 Playback Switch", 0x08, 2, HDA_INPUT),
3418 /* Modes for retasking pin widgets
3419 * Note: the ALC260 doesn't seem to act on requests to enable mic
3420 * bias from NIDs 0x0f and 0x10. The ALC260 datasheet doesn't
3421 * mention this restriction. At this stage it's not clear whether
3422 * this behaviour is intentional or is a hardware bug in chip
3423 * revisions available at least up until early 2006. Therefore for
3424 * now allow the "HP-OUT" and "LINE-OUT" Mode controls to span all
3425 * choices, but if it turns out that the lack of mic bias for these
3426 * NIDs is intentional we could change their modes from
3427 * ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
3429 ALC_PIN_MODE("HP-OUT pin mode", 0x10, ALC_PIN_DIR_INOUT),
3430 ALC_PIN_MODE("LINE-OUT pin mode", 0x0f, ALC_PIN_DIR_INOUT),
3431 ALC_PIN_MODE("LINE2 pin mode", 0x15, ALC_PIN_DIR_INOUT),
3432 ALC_PIN_MODE("LINE1 pin mode", 0x14, ALC_PIN_DIR_INOUT),
3433 ALC_PIN_MODE("MIC2 pin mode", 0x13, ALC_PIN_DIR_INOUT),
3434 ALC_PIN_MODE("MIC1 pin mode", 0x12, ALC_PIN_DIR_INOUT),
3436 /* Loopback mixer controls */
3437 HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x07, 0x00, HDA_INPUT),
3438 HDA_CODEC_MUTE("MIC1 Playback Switch", 0x07, 0x00, HDA_INPUT),
3439 HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x07, 0x01, HDA_INPUT),
3440 HDA_CODEC_MUTE("MIC2 Playback Switch", 0x07, 0x01, HDA_INPUT),
3441 HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x07, 0x02, HDA_INPUT),
3442 HDA_CODEC_MUTE("LINE1 Playback Switch", 0x07, 0x02, HDA_INPUT),
3443 HDA_CODEC_VOLUME("LINE2 Playback Volume", 0x07, 0x03, HDA_INPUT),
3444 HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT),
3445 HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
3446 HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
3447 HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT),
3448 HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT),
3449 HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT),
3450 HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT),
3451 HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT),
3452 HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT),
3454 /* Controls for GPIO pins, assuming they are configured as outputs */
3455 ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01),
3456 ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02),
3457 ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04),
3458 ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08),
3460 /* Switches to allow the digital IO pins to be enabled. The datasheet
3461 * is ambigious as to which NID is which; testing on laptops which
3462 * make this output available should provide clarification.
3464 ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01),
3465 ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01),
3469 static struct hda_verb alc260_test_init_verbs[] = {
3470 /* Enable all GPIOs as outputs with an initial value of 0 */
3471 {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f},
3472 {0x01, AC_VERB_SET_GPIO_DATA, 0x00},
3473 {0x01, AC_VERB_SET_GPIO_MASK, 0x0f},
3475 /* Enable retasking pins as output, initially without power amp */
3476 {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
3477 {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
3478 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
3479 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
3480 {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
3481 {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
3483 /* Disable digital (SPDIF) pins initially, but users can enable
3484 * them via a mixer switch. In the case of SPDIF-out, this initverb
3485 * payload also sets the generation to 0, output to be in "consumer"
3486 * PCM format, copyright asserted, no pre-emphasis and no validity
3489 {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
3490 {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
3492 /* Ensure mic1, mic2, line1 and line2 pin widgets take input from the
3493 * OUT1 sum bus when acting as an output.
3495 {0x0b, AC_VERB_SET_CONNECT_SEL, 0},
3496 {0x0c, AC_VERB_SET_CONNECT_SEL, 0},
3497 {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
3498 {0x0e, AC_VERB_SET_CONNECT_SEL, 0},
3500 /* Start with output sum widgets muted and their output gains at min */
3501 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3502 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
3503 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
3504 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3505 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
3506 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
3507 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3508 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
3509 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
3511 /* Unmute retasking pin widget output buffers since the default
3512 * state appears to be output. As the pin mode is changed by the
3513 * user the pin mode control will take care of enabling the pin's
3514 * input/output buffers as needed.
3516 {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
3517 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
3518 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
3519 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
3520 {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
3521 {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
3522 /* Also unmute the mono-out pin widget */
3523 {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
3525 /* Mute capture amp left and right */
3526 {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3527 /* Set ADC connection select to match default mixer setting (mic1
3530 {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
3532 /* Do the same for the second ADC: mute capture input amp and
3533 * set ADC connection to mic1 pin
3535 {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
3536 {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
3538 /* Mute all inputs to mixer widget (even unconnected ones) */
3539 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
3540 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
3541 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
3542 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
3543 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
3544 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
3545 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
3546 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
3552 static struct hda_pcm_stream alc260_pcm_analog_playback = {
3558 static struct hda_pcm_stream alc260_pcm_analog_capture = {
3564 #define alc260_pcm_digital_playback alc880_pcm_digital_playback
3565 #define alc260_pcm_digital_capture alc880_pcm_digital_capture
3568 * for BIOS auto-configuration
3571 static int alc260_add_playback_controls(struct alc_spec *spec, hda_nid_t nid,
3575 unsigned long vol_val, sw_val;
3579 if (nid >= 0x0f && nid < 0x11) {
3580 nid_vol = nid - 0x7;
3581 vol_val = HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0, HDA_OUTPUT);
3582 sw_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
3583 } else if (nid == 0x11) {
3584 nid_vol = nid - 0x7;
3585 vol_val = HDA_COMPOSE_AMP_VAL(nid_vol, 2, 0, HDA_OUTPUT);
3586 sw_val = HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT);
3587 } else if (nid >= 0x12 && nid <= 0x15) {
3589 vol_val = HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0, HDA_OUTPUT);
3590 sw_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
3594 snprintf(name, sizeof(name), "%s Playback Volume", pfx);
3595 if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name, vol_val)) < 0)
3597 snprintf(name, sizeof(name), "%s Playback Switch", pfx);
3598 if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name, sw_val)) < 0)
3603 /* add playback controls from the parsed DAC table */
3604 static int alc260_auto_create_multi_out_ctls(struct alc_spec *spec,
3605 const struct auto_pin_cfg *cfg)
3610 spec->multiout.num_dacs = 1;
3611 spec->multiout.dac_nids = spec->private_dac_nids;
3612 spec->multiout.dac_nids[0] = 0x02;
3614 nid = cfg->line_out_pins[0];
3616 err = alc260_add_playback_controls(spec, nid, "Front");
3621 nid = cfg->speaker_pins[0];
3623 err = alc260_add_playback_controls(spec, nid, "Speaker");
3630 err = alc260_add_playback_controls(spec, nid, "Headphone");
3637 /* create playback/capture controls for input pins */
3638 static int alc260_auto_create_analog_input_ctls(struct alc_spec *spec,
3639 const struct auto_pin_cfg *cfg)
3641 struct hda_input_mux *imux = &spec->private_imux;
3644 for (i = 0; i < AUTO_PIN_LAST; i++) {
3645 if (cfg->input_pins[i] >= 0x12) {
3646 idx = cfg->input_pins[i] - 0x12;
3647 err = new_analog_input(spec, cfg->input_pins[i],
3648 auto_pin_cfg_labels[i], idx, 0x07);
3651 imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
3652 imux->items[imux->num_items].index = idx;
3655 if ((cfg->input_pins[i] >= 0x0f) && (cfg->input_pins[i] <= 0x10)){
3656 idx = cfg->input_pins[i] - 0x09;
3657 err = new_analog_input(spec, cfg->input_pins[i],
3658 auto_pin_cfg_labels[i], idx, 0x07);
3661 imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
3662 imux->items[imux->num_items].index = idx;
3669 static void alc260_auto_set_output_and_unmute(struct hda_codec *codec,
3670 hda_nid_t nid, int pin_type,
3674 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
3675 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
3676 /* need the manual connection? */
3678 int idx = nid - 0x12;
3679 snd_hda_codec_write(codec, idx + 0x0b, 0,
3680 AC_VERB_SET_CONNECT_SEL, sel_idx);
3685 static void alc260_auto_init_multi_out(struct hda_codec *codec)
3687 struct alc_spec *spec = codec->spec;
3690 nid = spec->autocfg.line_out_pins[0];
3692 alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0);
3694 nid = spec->autocfg.speaker_pins[0];
3696 alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0);
3698 nid = spec->autocfg.hp_pin;
3700 alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0);
3703 #define ALC260_PIN_CD_NID 0x16
3704 static void alc260_auto_init_analog_input(struct hda_codec *codec)
3706 struct alc_spec *spec = codec->spec;
3709 for (i = 0; i < AUTO_PIN_LAST; i++) {
3710 hda_nid_t nid = spec->autocfg.input_pins[i];
3712 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
3713 i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
3714 if (nid != ALC260_PIN_CD_NID)
3715 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
3722 * generic initialization of ADC, input mixers and output mixers
3724 static struct hda_verb alc260_volume_init_verbs[] = {
3726 * Unmute ADC0-1 and set the default input to mic-in
3728 {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
3729 {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
3730 {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
3731 {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
3733 /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
3735 * Note: PASD motherboards uses the Line In 2 as the input for front panel
3738 /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
3739 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
3740 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
3741 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
3742 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
3743 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
3746 * Set up output mixers (0x08 - 0x0a)
3748 /* set vol=0 to output mixers */
3749 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
3750 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
3751 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
3752 /* set up input amps for analog loopback */
3753 /* Amp Indices: DAC = 0, mixer = 1 */
3754 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
3755 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
3756 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
3757 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
3758 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
3759 {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
3764 static int alc260_parse_auto_config(struct hda_codec *codec)
3766 struct alc_spec *spec = codec->spec;
3769 static hda_nid_t alc260_ignore[] = { 0x17, 0 };
3771 if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
3772 alc260_ignore)) < 0)
3774 if ((err = alc260_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0)
3776 if (! spec->kctl_alloc)
3777 return 0; /* can't find valid BIOS pin config */
3778 if ((err = alc260_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
3781 spec->multiout.max_channels = 2;
3783 if (spec->autocfg.dig_out_pin)
3784 spec->multiout.dig_out_nid = ALC260_DIGOUT_NID;
3785 if (spec->kctl_alloc)
3786 spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
3788 spec->init_verbs[spec->num_init_verbs++] = alc260_volume_init_verbs;
3790 spec->num_mux_defs = 1;
3791 spec->input_mux = &spec->private_imux;
3793 /* check whether NID 0x04 is valid */
3794 wcap = get_wcaps(codec, 0x04);
3795 wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
3796 if (wcap != AC_WID_AUD_IN) {
3797 spec->adc_nids = alc260_adc_nids_alt;
3798 spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt);
3799 spec->mixers[spec->num_mixers] = alc260_capture_alt_mixer;
3801 spec->adc_nids = alc260_adc_nids;
3802 spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids);
3803 spec->mixers[spec->num_mixers] = alc260_capture_mixer;
3810 /* additional initialization for auto-configuration model */
3811 static void alc260_auto_init(struct hda_codec *codec)
3813 alc260_auto_init_multi_out(codec);
3814 alc260_auto_init_analog_input(codec);
3818 * ALC260 configurations
3820 static struct hda_board_config alc260_cfg_tbl[] = {
3821 { .modelname = "basic", .config = ALC260_BASIC },
3822 { .pci_subvendor = 0x104d, .pci_subdevice = 0x81bb,
3823 .config = ALC260_BASIC }, /* Sony VAIO */
3824 { .pci_subvendor = 0x152d, .pci_subdevice = 0x0729,
3825 .config = ALC260_BASIC }, /* CTL Travel Master U553W */
3826 { .modelname = "hp", .config = ALC260_HP },
3827 { .pci_subvendor = 0x103c, .pci_subdevice = 0x3010, .config = ALC260_HP },
3828 { .pci_subvendor = 0x103c, .pci_subdevice = 0x3011, .config = ALC260_HP },
3829 { .pci_subvendor = 0x103c, .pci_subdevice = 0x3012, .config = ALC260_HP },
3830 { .pci_subvendor = 0x103c, .pci_subdevice = 0x3013, .config = ALC260_HP_3013 },
3831 { .pci_subvendor = 0x103c, .pci_subdevice = 0x3014, .config = ALC260_HP },
3832 { .pci_subvendor = 0x103c, .pci_subdevice = 0x3015, .config = ALC260_HP },
3833 { .pci_subvendor = 0x103c, .pci_subdevice = 0x3016, .config = ALC260_HP },
3834 { .modelname = "fujitsu", .config = ALC260_FUJITSU_S702X },
3835 { .pci_subvendor = 0x10cf, .pci_subdevice = 0x1326, .config = ALC260_FUJITSU_S702X },
3836 { .modelname = "acer", .config = ALC260_ACER },
3837 { .pci_subvendor = 0x1025, .pci_subdevice = 0x008f, .config = ALC260_ACER },
3838 #ifdef CONFIG_SND_DEBUG
3839 { .modelname = "test", .config = ALC260_TEST },
3841 { .modelname = "auto", .config = ALC260_AUTO },
3845 static struct alc_config_preset alc260_presets[] = {
3847 .mixers = { alc260_base_output_mixer,
3849 alc260_pc_beep_mixer,
3850 alc260_capture_mixer },
3851 .init_verbs = { alc260_init_verbs },
3852 .num_dacs = ARRAY_SIZE(alc260_dac_nids),
3853 .dac_nids = alc260_dac_nids,
3854 .num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
3855 .adc_nids = alc260_adc_nids,
3856 .num_channel_mode = ARRAY_SIZE(alc260_modes),
3857 .channel_mode = alc260_modes,
3858 .input_mux = &alc260_capture_source,
3861 .mixers = { alc260_base_output_mixer,
3863 alc260_capture_alt_mixer },
3864 .init_verbs = { alc260_hp_init_verbs },
3865 .num_dacs = ARRAY_SIZE(alc260_dac_nids),
3866 .dac_nids = alc260_dac_nids,
3867 .num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids),
3868 .adc_nids = alc260_hp_adc_nids,
3869 .num_channel_mode = ARRAY_SIZE(alc260_modes),
3870 .channel_mode = alc260_modes,
3871 .input_mux = &alc260_capture_source,
3873 [ALC260_HP_3013] = {
3874 .mixers = { alc260_hp_3013_mixer,
3876 alc260_capture_alt_mixer },
3877 .init_verbs = { alc260_hp_3013_init_verbs },
3878 .num_dacs = ARRAY_SIZE(alc260_dac_nids),
3879 .dac_nids = alc260_dac_nids,
3880 .num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids),
3881 .adc_nids = alc260_hp_adc_nids,
3882 .num_channel_mode = ARRAY_SIZE(alc260_modes),
3883 .channel_mode = alc260_modes,
3884 .input_mux = &alc260_capture_source,
3886 [ALC260_FUJITSU_S702X] = {
3887 .mixers = { alc260_fujitsu_mixer,
3888 alc260_capture_mixer },
3889 .init_verbs = { alc260_fujitsu_init_verbs },
3890 .num_dacs = ARRAY_SIZE(alc260_dac_nids),
3891 .dac_nids = alc260_dac_nids,
3892 .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
3893 .adc_nids = alc260_dual_adc_nids,
3894 .num_channel_mode = ARRAY_SIZE(alc260_modes),
3895 .channel_mode = alc260_modes,
3896 .num_mux_defs = ARRAY_SIZE(alc260_fujitsu_capture_sources),
3897 .input_mux = alc260_fujitsu_capture_sources,
3900 .mixers = { alc260_acer_mixer,
3901 alc260_capture_mixer },
3902 .init_verbs = { alc260_acer_init_verbs },
3903 .num_dacs = ARRAY_SIZE(alc260_dac_nids),
3904 .dac_nids = alc260_dac_nids,
3905 .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
3906 .adc_nids = alc260_dual_adc_nids,
3907 .num_channel_mode = ARRAY_SIZE(alc260_modes),
3908 .channel_mode = alc260_modes,
3909 .num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources),
3910 .input_mux = alc260_acer_capture_sources,
3912 #ifdef CONFIG_SND_DEBUG
3914 .mixers = { alc260_test_mixer,
3915 alc260_capture_mixer },
3916 .init_verbs = { alc260_test_init_verbs },
3917 .num_dacs = ARRAY_SIZE(alc260_test_dac_nids),
3918 .dac_nids = alc260_test_dac_nids,
3919 .num_adc_nids = ARRAY_SIZE(alc260_test_adc_nids),
3920 .adc_nids = alc260_test_adc_nids,
3921 .num_channel_mode = ARRAY_SIZE(alc260_modes),
3922 .channel_mode = alc260_modes,
3923 .num_mux_defs = ARRAY_SIZE(alc260_test_capture_sources),
3924 .input_mux = alc260_test_capture_sources,
3929 static int patch_alc260(struct hda_codec *codec)
3931 struct alc_spec *spec;
3932 int err, board_config;
3934 spec = kzalloc(sizeof(*spec), GFP_KERNEL);
3940 board_config = snd_hda_check_board_config(codec, alc260_cfg_tbl);
3941 if (board_config < 0 || board_config >= ALC260_MODEL_LAST) {
3942 snd_printd(KERN_INFO "hda_codec: Unknown model for ALC260\n");
3943 board_config = ALC260_AUTO;
3946 if (board_config == ALC260_AUTO) {
3947 /* automatic parse from the BIOS config */
3948 err = alc260_parse_auto_config(codec);
3953 printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
3954 board_config = ALC260_BASIC;
3958 if (board_config != ALC260_AUTO)
3959 setup_preset(spec, &alc260_presets[board_config]);
3961 spec->stream_name_analog = "ALC260 Analog";
3962 spec->stream_analog_playback = &alc260_pcm_analog_playback;
3963 spec->stream_analog_capture = &alc260_pcm_analog_capture;
3965 spec->stream_name_digital = "ALC260 Digital";
3966 spec->stream_digital_playback = &alc260_pcm_digital_playback;
3967 spec->stream_digital_capture = &alc260_pcm_digital_capture;
3969 codec->patch_ops = alc_patch_ops;
3970 if (board_config == ALC260_AUTO)
3971 spec->init_hook = alc260_auto_init;
3980 * ALC882 is almost identical with ALC880 but has cleaner and more flexible
3981 * configuration. Each pin widget can choose any input DACs and a mixer.
3982 * Each ADC is connected from a mixer of all inputs. This makes possible
3983 * 6-channel independent captures.
3985 * In addition, an independent DAC for the multi-playback (not used in this
3988 #define ALC882_DIGOUT_NID 0x06
3989 #define ALC882_DIGIN_NID 0x0a
3991 static struct hda_channel_mode alc882_ch_modes[1] = {
3995 static hda_nid_t alc882_dac_nids[4] = {
3996 /* front, rear, clfe, rear_surr */
3997 0x02, 0x03, 0x04, 0x05
4000 /* identical with ALC880 */
4001 #define alc882_adc_nids alc880_adc_nids
4002 #define alc882_adc_nids_alt alc880_adc_nids_alt
4005 /* FIXME: should be a matrix-type input source selection */
4007 static struct hda_input_mux alc882_capture_source = {
4011 { "Front Mic", 0x1 },
4016 #define alc882_mux_enum_info alc_mux_enum_info
4017 #define alc882_mux_enum_get alc_mux_enum_get
4019 static int alc882_mux_enum_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
4021 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
4022 struct alc_spec *spec = codec->spec;
4023 const struct hda_input_mux *imux = spec->input_mux;
4024 unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
4025 static hda_nid_t capture_mixers[3] = { 0x24, 0x23, 0x22 };
4026 hda_nid_t nid = capture_mixers[adc_idx];
4027 unsigned int *cur_val = &spec->cur_mux[adc_idx];
4028 unsigned int i, idx;
4030 idx = ucontrol->value.enumerated.item[0];
4031 if (idx >= imux->num_items)
4032 idx = imux->num_items - 1;
4033 if (*cur_val == idx && ! codec->in_resume)
4035 for (i = 0; i < imux->num_items; i++) {
4036 unsigned int v = (i == idx) ? 0x7000 : 0x7080;
4037 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
4038 v | (imux->items[i].index << 8));
4047 static struct hda_verb alc882_sixstack_ch6_init[] = {
4048 { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
4049 { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
4050 { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
4051 { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
4058 static struct hda_verb alc882_sixstack_ch8_init[] = {
4059 { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
4060 { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
4061 { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
4062 { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
4066 static struct hda_channel_mode alc882_sixstack_modes[2] = {
4067 { 6, alc882_sixstack_ch6_init },
4068 { 8, alc882_sixstack_ch8_init },
4071 /* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
4072 * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
4074 static struct snd_kcontrol_new alc882_base_mixer[] = {
4075 HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
4076 HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
4077 HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
4078 HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
4079 HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
4080 HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
4081 HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
4082 HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
4083 HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
4084 HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
4085 HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
4086 HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
4087 HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
4088 HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
4089 HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
4090 HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
4091 HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
4092 HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
4093 HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
4094 HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
4095 HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
4096 HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
4097 HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
4098 HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
4099 HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
4100 HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
4101 HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
4103 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
4104 /* .name = "Capture Source", */
4105 .name = "Input Source",
4107 .info = alc882_mux_enum_info,
4108 .get = alc882_mux_enum_get,
4109 .put = alc882_mux_enum_put,
4114 static struct snd_kcontrol_new alc882_chmode_mixer[] = {
4116 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
4117 .name = "Channel Mode",
4118 .info = alc_ch_mode_info,
4119 .get = alc_ch_mode_get,
4120 .put = alc_ch_mode_put,
4125 static struct hda_verb alc882_init_verbs[] = {
4126 /* Front mixer: unmute input/output amp left and right (volume = 0) */
4127 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
4128 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
4129 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
4131 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
4132 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
4133 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
4135 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
4136 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
4137 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
4139 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
4140 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
4141 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
4143 /* Front Pin: output 0 (0x0c) */
4144 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
4145 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
4146 {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
4147 /* Rear Pin: output 1 (0x0d) */
4148 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
4149 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
4150 {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
4151 /* CLFE Pin: output 2 (0x0e) */
4152 {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
4153 {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
4154 {0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
4155 /* Side Pin: output 3 (0x0f) */
4156 {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
4157 {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
4158 {0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
4159 /* Mic (rear) pin: input vref at 80% */
4160 {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
4161 {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
4162 /* Front Mic pin: input vref at 80% */
4163 {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
4164 {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
4165 /* Line In pin: input */
4166 {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
4167 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
4168 /* Line-2 In: Headphone output (output 0 - 0x0c) */
4169 {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
4170 {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
4171 {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
4172 /* CD pin widget for input */
4173 {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
4175 /* FIXME: use matrix-type input source selection */
4176 /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
4177 /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
4178 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4179 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
4180 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
4181 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
4183 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4184 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
4185 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
4186 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
4188 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4189 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
4190 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
4191 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
4192 /* ADC1: mute amp left and right */
4193 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
4194 {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
4195 /* ADC2: mute amp left and right */
4196 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
4197 {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
4198 /* ADC3: mute amp left and right */
4199 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
4200 {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
4206 * generic initialization of ADC, input mixers and output mixers
4208 static struct hda_verb alc882_auto_init_verbs[] = {
4210 * Unmute ADC0-2 and set the default input to mic-in
4212 {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
4213 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4214 {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
4215 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4216 {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
4217 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4219 /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
4221 * Note: PASD motherboards uses the Line In 2 as the input for front panel
4224 /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
4225 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4226 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
4227 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
4228 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
4229 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
4232 * Set up output mixers (0x0c - 0x0f)
4234 /* set vol=0 to output mixers */
4235 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
4236 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
4237 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
4238 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
4239 /* set up input amps for analog loopback */
4240 /* Amp Indices: DAC = 0, mixer = 1 */
4241 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4242 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
4243 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4244 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
4245 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4246 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
4247 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4248 {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
4249 {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4250 {0x26, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
4252 /* FIXME: use matrix-type input source selection */
4253 /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
4254 /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
4255 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
4256 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
4257 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
4258 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
4260 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
4261 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
4262 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
4263 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
4265 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
4266 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
4267 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
4268 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
4273 /* capture mixer elements */
4274 static struct snd_kcontrol_new alc882_capture_alt_mixer[] = {
4275 HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
4276 HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
4277 HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
4278 HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
4280 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
4281 /* The multiple "Capture Source" controls confuse alsamixer
4282 * So call somewhat different..
4283 * FIXME: the controls appear in the "playback" view!
4285 /* .name = "Capture Source", */
4286 .name = "Input Source",
4288 .info = alc882_mux_enum_info,
4289 .get = alc882_mux_enum_get,
4290 .put = alc882_mux_enum_put,
4295 static struct snd_kcontrol_new alc882_capture_mixer[] = {
4296 HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
4297 HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
4298 HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
4299 HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
4300 HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
4301 HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
4303 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
4304 /* The multiple "Capture Source" controls confuse alsamixer
4305 * So call somewhat different..
4306 * FIXME: the controls appear in the "playback" view!
4308 /* .name = "Capture Source", */
4309 .name = "Input Source",
4311 .info = alc882_mux_enum_info,
4312 .get = alc882_mux_enum_get,
4313 .put = alc882_mux_enum_put,
4318 /* pcm configuration: identiacal with ALC880 */
4319 #define alc882_pcm_analog_playback alc880_pcm_analog_playback
4320 #define alc882_pcm_analog_capture alc880_pcm_analog_capture
4321 #define alc882_pcm_digital_playback alc880_pcm_digital_playback
4322 #define alc882_pcm_digital_capture alc880_pcm_digital_capture
4325 * configuration and preset
4327 static struct hda_board_config alc882_cfg_tbl[] = {
4328 { .modelname = "3stack-dig", .config = ALC882_3ST_DIG },
4329 { .modelname = "6stack-dig", .config = ALC882_6ST_DIG },
4330 { .pci_subvendor = 0x1462, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* MSI */
4331 { .pci_subvendor = 0x105b, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* Foxconn */
4332 { .pci_subvendor = 0x1019, .pci_subdevice = 0x6668, .config = ALC882_6ST_DIG }, /* ECS */
4333 { .modelname = "auto", .config = ALC882_AUTO },
4337 static struct alc_config_preset alc882_presets[] = {
4338 [ALC882_3ST_DIG] = {
4339 .mixers = { alc882_base_mixer },
4340 .init_verbs = { alc882_init_verbs },
4341 .num_dacs = ARRAY_SIZE(alc882_dac_nids),
4342 .dac_nids = alc882_dac_nids,
4343 .dig_out_nid = ALC882_DIGOUT_NID,
4344 .num_adc_nids = ARRAY_SIZE(alc882_adc_nids),
4345 .adc_nids = alc882_adc_nids,
4346 .dig_in_nid = ALC882_DIGIN_NID,
4347 .num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
4348 .channel_mode = alc882_ch_modes,
4349 .input_mux = &alc882_capture_source,
4351 [ALC882_6ST_DIG] = {
4352 .mixers = { alc882_base_mixer, alc882_chmode_mixer },
4353 .init_verbs = { alc882_init_verbs },
4354 .num_dacs = ARRAY_SIZE(alc882_dac_nids),
4355 .dac_nids = alc882_dac_nids,
4356 .dig_out_nid = ALC882_DIGOUT_NID,
4357 .num_adc_nids = ARRAY_SIZE(alc882_adc_nids),
4358 .adc_nids = alc882_adc_nids,
4359 .dig_in_nid = ALC882_DIGIN_NID,
4360 .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes),
4361 .channel_mode = alc882_sixstack_modes,
4362 .input_mux = &alc882_capture_source,
4368 * BIOS auto configuration
4370 static void alc882_auto_set_output_and_unmute(struct hda_codec *codec,
4371 hda_nid_t nid, int pin_type,
4375 struct alc_spec *spec = codec->spec;
4378 if (spec->multiout.dac_nids[dac_idx] == 0x25)
4381 idx = spec->multiout.dac_nids[dac_idx] - 2;
4383 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
4384 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
4385 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, idx);
4389 static void alc882_auto_init_multi_out(struct hda_codec *codec)
4391 struct alc_spec *spec = codec->spec;
4394 for (i = 0; i <= HDA_SIDE; i++) {
4395 hda_nid_t nid = spec->autocfg.line_out_pins[i];
4397 alc882_auto_set_output_and_unmute(codec, nid, PIN_OUT, i);
4401 static void alc882_auto_init_hp_out(struct hda_codec *codec)
4403 struct alc_spec *spec = codec->spec;
4406 pin = spec->autocfg.hp_pin;
4407 if (pin) /* connect to front */
4408 alc882_auto_set_output_and_unmute(codec, pin, PIN_HP, 0); /* use dac 0 */
4411 #define alc882_is_input_pin(nid) alc880_is_input_pin(nid)
4412 #define ALC882_PIN_CD_NID ALC880_PIN_CD_NID
4414 static void alc882_auto_init_analog_input(struct hda_codec *codec)
4416 struct alc_spec *spec = codec->spec;
4419 for (i = 0; i < AUTO_PIN_LAST; i++) {
4420 hda_nid_t nid = spec->autocfg.input_pins[i];
4421 if (alc882_is_input_pin(nid)) {
4422 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
4423 i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
4424 if (nid != ALC882_PIN_CD_NID)
4425 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
4431 /* almost identical with ALC880 parser... */
4432 static int alc882_parse_auto_config(struct hda_codec *codec)
4434 struct alc_spec *spec = codec->spec;
4435 int err = alc880_parse_auto_config(codec);
4440 /* hack - override the init verbs */
4441 spec->init_verbs[0] = alc882_auto_init_verbs;
4445 /* additional initialization for auto-configuration model */
4446 static void alc882_auto_init(struct hda_codec *codec)
4448 alc882_auto_init_multi_out(codec);
4449 alc882_auto_init_hp_out(codec);
4450 alc882_auto_init_analog_input(codec);
4454 * ALC882 Headphone poll in 3.5.1a or 3.5.2
4457 static int patch_alc882(struct hda_codec *codec)
4459 struct alc_spec *spec;
4460 int err, board_config;
4462 spec = kzalloc(sizeof(*spec), GFP_KERNEL);
4468 board_config = snd_hda_check_board_config(codec, alc882_cfg_tbl);
4470 if (board_config < 0 || board_config >= ALC882_MODEL_LAST) {
4471 printk(KERN_INFO "hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...\n");
4472 board_config = ALC882_AUTO;
4475 if (board_config == ALC882_AUTO) {
4476 /* automatic parse from the BIOS config */
4477 err = alc882_parse_auto_config(codec);
4482 printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
4483 board_config = ALC882_3ST_DIG;
4487 if (board_config != ALC882_AUTO)
4488 setup_preset(spec, &alc882_presets[board_config]);
4490 spec->stream_name_analog = "ALC882 Analog";
4491 spec->stream_analog_playback = &alc882_pcm_analog_playback;
4492 spec->stream_analog_capture = &alc882_pcm_analog_capture;
4494 spec->stream_name_digital = "ALC882 Digital";
4495 spec->stream_digital_playback = &alc882_pcm_digital_playback;
4496 spec->stream_digital_capture = &alc882_pcm_digital_capture;
4498 if (! spec->adc_nids && spec->input_mux) {
4499 /* check whether NID 0x07 is valid */
4500 unsigned int wcap = get_wcaps(codec, 0x07);
4501 wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
4502 if (wcap != AC_WID_AUD_IN) {
4503 spec->adc_nids = alc882_adc_nids_alt;
4504 spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids_alt);
4505 spec->mixers[spec->num_mixers] = alc882_capture_alt_mixer;
4508 spec->adc_nids = alc882_adc_nids;
4509 spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids);
4510 spec->mixers[spec->num_mixers] = alc882_capture_mixer;
4515 codec->patch_ops = alc_patch_ops;
4516 if (board_config == ALC882_AUTO)
4517 spec->init_hook = alc882_auto_init;
4526 #define ALC262_DIGOUT_NID ALC880_DIGOUT_NID
4527 #define ALC262_DIGIN_NID ALC880_DIGIN_NID
4529 #define alc262_dac_nids alc260_dac_nids
4530 #define alc262_adc_nids alc882_adc_nids
4531 #define alc262_adc_nids_alt alc882_adc_nids_alt
4533 #define alc262_modes alc260_modes
4534 #define alc262_capture_source alc882_capture_source
4536 static struct snd_kcontrol_new alc262_base_mixer[] = {
4537 HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
4538 HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
4539 HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
4540 HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
4541 HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
4542 HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
4543 HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
4544 HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
4545 HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
4546 HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
4547 /* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT),
4548 HDA_CODEC_MUTE("PC Beelp Playback Switch", 0x0b, 0x05, HDA_INPUT), */
4549 HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),
4550 HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
4551 HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
4552 HDA_CODEC_MUTE_MONO("Mono Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT),
4556 #define alc262_capture_mixer alc882_capture_mixer
4557 #define alc262_capture_alt_mixer alc882_capture_alt_mixer
4560 * generic initialization of ADC, input mixers and output mixers
4562 static struct hda_verb alc262_init_verbs[] = {
4564 * Unmute ADC0-2 and set the default input to mic-in
4566 {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
4567 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4568 {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
4569 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4570 {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
4571 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4573 /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
4575 * Note: PASD motherboards uses the Line In 2 as the input for front panel
4578 /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
4579 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4580 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
4581 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
4582 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
4583 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
4586 * Set up output mixers (0x0c - 0x0e)
4588 /* set vol=0 to output mixers */
4589 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
4590 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
4591 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
4592 /* set up input amps for analog loopback */
4593 /* Amp Indices: DAC = 0, mixer = 1 */
4594 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4595 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
4596 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4597 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
4598 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4599 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
4601 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
4602 {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
4603 {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
4604 {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
4605 {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
4606 {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
4608 {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
4609 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
4610 {0x16, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
4611 {0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
4612 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
4614 {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
4615 {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
4617 /* FIXME: use matrix-type input source selection */
4618 /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
4619 /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
4620 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
4621 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
4622 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
4623 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
4625 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
4626 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
4627 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
4628 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
4630 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
4631 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
4632 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
4633 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
4640 * 0x14 = headphone/spdif-out, 0x15 = internal speaker
4643 #define ALC_HP_EVENT 0x37
4645 static struct hda_verb alc262_fujitsu_unsol_verbs[] = {
4646 {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
4647 {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
4651 static struct hda_input_mux alc262_fujitsu_capture_source = {
4659 /* mute/unmute internal speaker according to the hp jack and mute state */
4660 static void alc262_fujitsu_automute(struct hda_codec *codec, int force)
4662 struct alc_spec *spec = codec->spec;
4665 if (force || ! spec->sense_updated) {
4666 unsigned int present;
4667 /* need to execute and sync at first */
4668 snd_hda_codec_read(codec, 0x14, 0, AC_VERB_SET_PIN_SENSE, 0);
4669 present = snd_hda_codec_read(codec, 0x14, 0,
4670 AC_VERB_GET_PIN_SENSE, 0);
4671 spec->jack_present = (present & 0x80000000) != 0;
4672 spec->sense_updated = 1;
4674 if (spec->jack_present) {
4675 /* mute internal speaker */
4676 snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0,
4678 snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0,
4681 /* unmute internal speaker if necessary */
4682 mute = snd_hda_codec_amp_read(codec, 0x14, 0, HDA_OUTPUT, 0);
4683 snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0,
4685 mute = snd_hda_codec_amp_read(codec, 0x14, 1, HDA_OUTPUT, 0);
4686 snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0,
4691 /* unsolicited event for HP jack sensing */
4692 static void alc262_fujitsu_unsol_event(struct hda_codec *codec,
4695 if ((res >> 26) != ALC_HP_EVENT)
4697 alc262_fujitsu_automute(codec, 1);
4700 /* bind volumes of both NID 0x0c and 0x0d */
4701 static int alc262_fujitsu_master_vol_put(struct snd_kcontrol *kcontrol,
4702 struct snd_ctl_elem_value *ucontrol)
4704 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
4705 long *valp = ucontrol->value.integer.value;
4708 change = snd_hda_codec_amp_update(codec, 0x0c, 0, HDA_OUTPUT, 0,
4709 0x7f, valp[0] & 0x7f);
4710 change |= snd_hda_codec_amp_update(codec, 0x0c, 1, HDA_OUTPUT, 0,
4711 0x7f, valp[1] & 0x7f);
4712 snd_hda_codec_amp_update(codec, 0x0d, 0, HDA_OUTPUT, 0,
4713 0x7f, valp[0] & 0x7f);
4714 snd_hda_codec_amp_update(codec, 0x0d, 1, HDA_OUTPUT, 0,
4715 0x7f, valp[1] & 0x7f);
4719 /* bind hp and internal speaker mute (with plug check) */
4720 static int alc262_fujitsu_master_sw_put(struct snd_kcontrol *kcontrol,
4721 struct snd_ctl_elem_value *ucontrol)
4723 struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
4724 long *valp = ucontrol->value.integer.value;
4727 change = snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0,
4728 0x80, valp[0] ? 0 : 0x80);
4729 change |= snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0,
4730 0x80, valp[1] ? 0 : 0x80);
4731 if (change || codec->in_resume)
4732 alc262_fujitsu_automute(codec, codec->in_resume);
4736 static struct snd_kcontrol_new alc262_fujitsu_mixer[] = {
4738 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
4739 .name = "Master Playback Volume",
4740 .info = snd_hda_mixer_amp_volume_info,
4741 .get = snd_hda_mixer_amp_volume_get,
4742 .put = alc262_fujitsu_master_vol_put,
4743 .private_value = HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT),
4746 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
4747 .name = "Master Playback Switch",
4748 .info = snd_hda_mixer_amp_switch_info,
4749 .get = snd_hda_mixer_amp_switch_get,
4750 .put = alc262_fujitsu_master_sw_put,
4751 .private_value = HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
4753 HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
4754 HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
4755 HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
4756 HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
4757 HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
4761 /* add playback controls from the parsed DAC table */
4762 static int alc262_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
4767 spec->multiout.num_dacs = 1; /* only use one dac */
4768 spec->multiout.dac_nids = spec->private_dac_nids;
4769 spec->multiout.dac_nids[0] = 2;
4771 nid = cfg->line_out_pins[0];
4773 if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Front Playback Volume",
4774 HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT))) < 0)
4776 if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Front Playback Switch",
4777 HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
4781 nid = cfg->speaker_pins[0];
4784 if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Speaker Playback Volume",
4785 HDA_COMPOSE_AMP_VAL(0x0e, 2, 0, HDA_OUTPUT))) < 0)
4787 if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Speaker Playback Switch",
4788 HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
4791 if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Speaker Playback Switch",
4792 HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
4798 /* spec->multiout.hp_nid = 2; */
4800 if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Headphone Playback Volume",
4801 HDA_COMPOSE_AMP_VAL(0x0e, 2, 0, HDA_OUTPUT))) < 0)
4803 if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
4804 HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
4807 if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
4808 HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
4815 /* identical with ALC880 */
4816 #define alc262_auto_create_analog_input_ctls alc880_auto_create_analog_input_ctls
4819 * generic initialization of ADC, input mixers and output mixers
4821 static struct hda_verb alc262_volume_init_verbs[] = {
4823 * Unmute ADC0-2 and set the default input to mic-in
4825 {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
4826 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4827 {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
4828 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4829 {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
4830 {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4832 /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
4834 * Note: PASD motherboards uses the Line In 2 as the input for front panel
4837 /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
4838 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4839 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
4840 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
4841 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
4842 {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
4845 * Set up output mixers (0x0c - 0x0f)
4847 /* set vol=0 to output mixers */
4848 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
4849 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
4850 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
4852 /* set up input amps for analog loopback */
4853 /* Amp Indices: DAC = 0, mixer = 1 */
4854 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4855 {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
4856 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4857 {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
4858 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
4859 {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
4861 /* FIXME: use matrix-type input source selection */
4862 /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
4863 /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
4864 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
4865 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
4866 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
4867 {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
4869 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
4870 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
4871 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
4872 {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
4874 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
4875 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
4876 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
4877 {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
4882 /* pcm configuration: identiacal with ALC880 */
4883 #define alc262_pcm_analog_playback alc880_pcm_analog_playback
4884 #define alc262_pcm_analog_capture alc880_pcm_analog_capture
4885 #define alc262_pcm_digital_playback alc880_pcm_digital_playback
4886 #define alc262_pcm_digital_capture alc880_pcm_digital_capture
4889 * BIOS auto configuration
4891 static int alc262_parse_auto_config(struct hda_codec *codec)
4893 struct alc_spec *spec = codec->spec;
4895 static hda_nid_t alc262_ignore[] = { 0x1d, 0 };
4897 if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
4898 alc262_ignore)) < 0)
4900 if (! spec->autocfg.line_outs)
4901 return 0; /* can't find valid BIOS pin config */
4902 if ((err = alc262_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
4903 (err = alc262_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
4906 spec->multiout.max_channels = spec->multiout.num_dacs * 2;
4908 if (spec->autocfg.dig_out_pin)
4909 spec->multiout.dig_out_nid = ALC262_DIGOUT_NID;
4910 if (spec->autocfg.dig_in_pin)
4911 spec->dig_in_nid = ALC262_DIGIN_NID;
4913 if (spec->kctl_alloc)
4914 spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
4916 spec->init_verbs[spec->num_init_verbs++] = alc262_volume_init_verbs;
4917 spec->num_mux_defs = 1;
4918 spec->input_mux = &spec->private_imux;
4923 #define alc262_auto_init_multi_out alc882_auto_init_multi_out
4924 #define alc262_auto_init_hp_out alc882_auto_init_hp_out
4925 #define alc262_auto_init_analog_input alc882_auto_init_analog_input
4928 /* init callback for auto-configuration model -- overriding the default init */
4929 static void alc262_auto_init(struct hda_codec *codec)
4931 alc262_auto_init_multi_out(codec);
4932 alc262_auto_init_hp_out(codec);
4933 alc262_auto_init_analog_input(codec);
4937 * configuration and preset
4939 static struct hda_board_config alc262_cfg_tbl[] = {
4940 { .modelname = "basic", .config = ALC262_BASIC },
4941 { .modelname = "fujitsu", .config = ALC262_FUJITSU },
4942 { .pci_subvendor = 0x10cf, .pci_subdevice = 0x1397, .config = ALC262_FUJITSU },
4943 { .modelname = "auto", .config = ALC262_AUTO },
4947 static struct alc_config_preset alc262_presets[] = {
4949 .mixers = { alc262_base_mixer },
4950 .init_verbs = { alc262_init_verbs },
4951 .num_dacs = ARRAY_SIZE(alc262_dac_nids),
4952 .dac_nids = alc262_dac_nids,
4954 .num_channel_mode = ARRAY_SIZE(alc262_modes),
4955 .channel_mode = alc262_modes,
4956 .input_mux = &alc262_capture_source,
4958 [ALC262_FUJITSU] = {
4959 .mixers = { alc262_fujitsu_mixer },
4960 .init_verbs = { alc262_init_verbs, alc262_fujitsu_unsol_verbs },
4961 .num_dacs = ARRAY_SIZE(alc262_dac_nids),
4962 .dac_nids = alc262_dac_nids,
4964 .dig_out_nid = ALC262_DIGOUT_NID,
4965 .num_channel_mode = ARRAY_SIZE(alc262_modes),
4966 .channel_mode = alc262_modes,
4967 .input_mux = &alc262_fujitsu_capture_source,
4968 .unsol_event = alc262_fujitsu_unsol_event,
4972 static int patch_alc262(struct hda_codec *codec)
4974 struct alc_spec *spec;
4978 spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
4984 /* pshou 07/11/05 set a zero PCM sample to DAC when FIFO is under-run */
4987 snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_COEF_INDEX, 7);
4988 tmp = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_PROC_COEF, 0);
4989 snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_COEF_INDEX, 7);
4990 snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_PROC_COEF, tmp | 0x80);
4994 board_config = snd_hda_check_board_config(codec, alc262_cfg_tbl);
4995 if (board_config < 0 || board_config >= ALC262_MODEL_LAST) {
4996 printk(KERN_INFO "hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...\n");
4997 board_config = ALC262_AUTO;
5000 if (board_config == ALC262_AUTO) {
5001 /* automatic parse from the BIOS config */
5002 err = alc262_parse_auto_config(codec);
5007 printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
5008 board_config = ALC262_BASIC;
5012 if (board_config != ALC262_AUTO)
5013 setup_preset(spec, &alc262_presets[board_config]);
5015 spec->stream_name_analog = "ALC262 Analog";
5016 spec->stream_analog_playback = &alc262_pcm_analog_playback;
5017 spec->stream_analog_capture = &alc262_pcm_analog_capture;
5019 spec->stream_name_digital = "ALC262 Digital";
5020 spec->stream_digital_playback = &alc262_pcm_digital_playback;
5021 spec->stream_digital_capture = &alc262_pcm_digital_capture;
5023 if (! spec->adc_nids && spec->input_mux) {
5024 /* check whether NID 0x07 is valid */
5025 unsigned int wcap = get_wcaps(codec, 0x07);
5027 wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
5028 if (wcap != AC_WID_AUD_IN) {
5029 spec->adc_nids = alc262_adc_nids_alt;
5030 spec->num_adc_nids = ARRAY_SIZE(alc262_adc_nids_alt);
5031 spec->mixers[spec->num_mixers] = alc262_capture_alt_mixer;
5034 spec->adc_nids = alc262_adc_nids;
5035 spec->num_adc_nids = ARRAY_SIZE(alc262_adc_nids);
5036 spec->mixers[spec->num_mixers] = alc262_capture_mixer;
5041 codec->patch_ops = alc_patch_ops;
5042 if (board_config == ALC262_AUTO)
5043 spec->init_hook = alc262_auto_init;
5050 * ALC861 channel source setting (2/6 channel selection for 3-stack)
5054 * set the path ways for 2 channel output
5055 * need to set the codec line out and mic 1 pin widgets to inputs
5057 static struct hda_verb alc861_threestack_ch2_init[] = {
5058 /* set pin widget 1Ah (line in) for input */
5059 { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
5060 /* set pin widget 18h (mic1/2) for input, for mic also enable the vref */
5061 { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
5063 { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c },
5064 { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, //mic
5065 { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8)) }, //line in
5070 * need to set the codec line out and mic 1 pin widgets to outputs
5072 static struct hda_verb alc861_threestack_ch6_init[] = {
5073 /* set pin widget 1Ah (line in) for output (Back Surround)*/
5074 { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
5075 /* set pin widget 18h (mic1) for output (CLFE)*/
5076 { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
5078 { 0x0c, AC_VERB_SET_CONNECT_SEL, 0x00 },
5079 { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00 },
5081 { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
5082 { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, //mic
5083 { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8)) }, //line in
5087 static struct hda_channel_mode alc861_threestack_modes[2] = {
5088 { 2, alc861_threestack_ch2_init },
5089 { 6, alc861_threestack_ch6_init },
5094 static struct snd_kcontrol_new alc861_base_mixer[] = {
5095 /* output mixer control */
5096 HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
5097 HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
5098 HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
5099 HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
5100 HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT),
5102 /*Input mixer control */
5103 /* HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
5104 HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT), */
5105 HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
5106 HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
5107 HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
5108 HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
5109 HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
5110 HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
5111 HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
5112 HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
5114 /* Capture mixer control */
5115 HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
5116 HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
5118 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
5119 .name = "Capture Source",
5121 .info = alc_mux_enum_info,
5122 .get = alc_mux_enum_get,
5123 .put = alc_mux_enum_put,
5128 static struct snd_kcontrol_new alc861_3ST_mixer[] = {
5129 /* output mixer control */
5130 HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
5131 HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
5132 HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
5133 HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
5134 /*HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT), */
5136 /* Input mixer control */
5137 /* HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
5138 HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT), */
5139 HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
5140 HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
5141 HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
5142 HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
5143 HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
5144 HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
5145 HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
5146 HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
5148 /* Capture mixer control */
5149 HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
5150 HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
5152 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
5153 .name = "Capture Source",
5155 .info = alc_mux_enum_info,
5156 .get = alc_mux_enum_get,
5157 .put = alc_mux_enum_put,
5160 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
5161 .name = "Channel Mode",
5162 .info = alc_ch_mode_info,
5163 .get = alc_ch_mode_get,
5164 .put = alc_ch_mode_put,
5165 .private_value = ARRAY_SIZE(alc861_threestack_modes),
5171 * generic initialization of ADC, input mixers and output mixers
5173 static struct hda_verb alc861_base_init_verbs[] = {
5175 * Unmute ADC0 and set the default input to mic-in
5177 /* port-A for surround (rear panel) */
5178 { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
5179 { 0x0e, AC_VERB_SET_CONNECT_SEL, 0x00 },
5180 /* port-B for mic-in (rear panel) with vref */
5181 { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
5182 /* port-C for line-in (rear panel) */
5183 { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
5184 /* port-D for Front */
5185 { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
5186 { 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
5187 /* port-E for HP out (front panel) */
5188 { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
5189 /* route front PCM to HP */
5190 { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 },
5191 /* port-F for mic-in (front panel) with vref */
5192 { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
5193 /* port-G for CLFE (rear panel) */
5194 { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
5195 { 0x1f, AC_VERB_SET_CONNECT_SEL, 0x00 },
5196 /* port-H for side (rear panel) */
5197 { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
5198 { 0x20, AC_VERB_SET_CONNECT_SEL, 0x00 },
5200 { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
5201 /* route front mic to ADC1*/
5202 {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
5203 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5205 /* Unmute DAC0~3 & spdif out*/
5206 {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
5207 {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
5208 {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
5209 {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
5210 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
5212 /* Unmute Mixer 14 (mic) 1c (Line in)*/
5213 {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5214 {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5215 {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5216 {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5218 /* Unmute Stereo Mixer 15 */
5219 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5220 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5221 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
5222 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, //Output 0~12 step
5224 {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5225 {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5226 {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5227 {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5228 {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5229 {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5230 {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5231 {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5232 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, // hp used DAC 3 (Front)
5233 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
5238 static struct hda_verb alc861_threestack_init_verbs[] = {
5240 * Unmute ADC0 and set the default input to mic-in
5242 /* port-A for surround (rear panel) */
5243 { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
5244 /* port-B for mic-in (rear panel) with vref */
5245 { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
5246 /* port-C for line-in (rear panel) */
5247 { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
5248 /* port-D for Front */
5249 { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
5250 { 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
5251 /* port-E for HP out (front panel) */
5252 { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
5253 /* route front PCM to HP */
5254 { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 },
5255 /* port-F for mic-in (front panel) with vref */
5256 { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
5257 /* port-G for CLFE (rear panel) */
5258 { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
5259 /* port-H for side (rear panel) */
5260 { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
5262 { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
5263 /* route front mic to ADC1*/
5264 {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
5265 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5266 /* Unmute DAC0~3 & spdif out*/
5267 {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
5268 {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
5269 {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
5270 {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
5271 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
5273 /* Unmute Mixer 14 (mic) 1c (Line in)*/
5274 {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5275 {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5276 {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5277 {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5279 /* Unmute Stereo Mixer 15 */
5280 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5281 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5282 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
5283 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, //Output 0~12 step
5285 {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5286 {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5287 {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5288 {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5289 {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5290 {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5291 {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5292 {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5293 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, // hp used DAC 3 (Front)
5294 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
5298 * generic initialization of ADC, input mixers and output mixers
5300 static struct hda_verb alc861_auto_init_verbs[] = {
5302 * Unmute ADC0 and set the default input to mic-in
5304 // {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
5305 {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5307 /* Unmute DAC0~3 & spdif out*/
5308 {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
5309 {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
5310 {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
5311 {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
5312 {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
5314 /* Unmute Mixer 14 (mic) 1c (Line in)*/
5315 {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5316 {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5317 {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5318 {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5320 /* Unmute Stereo Mixer 15 */
5321 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5322 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5323 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
5324 {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c},
5326 {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5327 {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5328 {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5329 {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5330 {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5331 {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5332 {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
5333 {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
5335 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
5336 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
5337 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
5338 {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
5339 {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
5340 {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
5341 {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
5342 {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
5344 {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, // set Mic 1
5349 /* pcm configuration: identiacal with ALC880 */
5350 #define alc861_pcm_analog_playback alc880_pcm_analog_playback
5351 #define alc861_pcm_analog_capture alc880_pcm_analog_capture
5352 #define alc861_pcm_digital_playback alc880_pcm_digital_playback
5353 #define alc861_pcm_digital_capture alc880_pcm_digital_capture
5356 #define ALC861_DIGOUT_NID 0x07
5358 static struct hda_channel_mode alc861_8ch_modes[1] = {
5362 static hda_nid_t alc861_dac_nids[4] = {
5363 /* front, surround, clfe, side */
5364 0x03, 0x06, 0x05, 0x04
5367 static hda_nid_t alc861_adc_nids[1] = {
5372 static struct hda_input_mux alc861_capture_source = {
5376 { "Front Mic", 0x3 },
5383 /* fill in the dac_nids table from the parsed pin configuration */
5384 static int alc861_auto_fill_dac_nids(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
5389 spec->multiout.dac_nids = spec->private_dac_nids;
5390 for (i = 0; i < cfg->line_outs; i++) {
5391 nid = cfg->line_out_pins[i];
5393 if (i >= ARRAY_SIZE(alc861_dac_nids))
5395 spec->multiout.dac_nids[i] = alc861_dac_nids[i];
5398 spec->multiout.num_dacs = cfg->line_outs;
5402 /* add playback controls from the parsed DAC table */
5403 static int alc861_auto_create_multi_out_ctls(struct alc_spec *spec,
5404 const struct auto_pin_cfg *cfg)
5407 static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" };
5411 for (i = 0; i < cfg->line_outs; i++) {
5412 nid = spec->multiout.dac_nids[i];
5417 if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Center Playback Switch",
5418 HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT))) < 0)
5420 if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "LFE Playback Switch",
5421 HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
5424 for (idx = 0; idx < ARRAY_SIZE(alc861_dac_nids) - 1; idx++)
5425 if (nid == alc861_dac_nids[idx])
5427 sprintf(name, "%s Playback Switch", chname[idx]);
5428 if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name,
5429 HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
5436 static int alc861_auto_create_hp_ctls(struct alc_spec *spec, hda_nid_t pin)
5444 if ((pin >= 0x0b && pin <= 0x10) || pin == 0x1f || pin == 0x20) {
5446 if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
5447 HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
5449 spec->multiout.hp_nid = nid;
5454 /* create playback/capture controls for input pins */
5455 static int alc861_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
5457 struct hda_input_mux *imux = &spec->private_imux;
5458 int i, err, idx, idx1;
5460 for (i = 0; i < AUTO_PIN_LAST; i++) {
5461 switch(cfg->input_pins[i]) {
5486 err = new_analog_input(spec, cfg->input_pins[i],
5487 auto_pin_cfg_labels[i], idx, 0x15);
5491 imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
5492 imux->items[imux->num_items].index = idx1;
5498 static struct snd_kcontrol_new alc861_capture_mixer[] = {
5499 HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
5500 HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
5503 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
5504 /* The multiple "Capture Source" controls confuse alsamixer
5505 * So call somewhat different..
5506 *FIXME: the controls appear in the "playback" view!
5508 /* .name = "Capture Source", */
5509 .name = "Input Source",
5511 .info = alc_mux_enum_info,
5512 .get = alc_mux_enum_get,
5513 .put = alc_mux_enum_put,
5518 static void alc861_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid,
5519 int pin_type, int dac_idx)
5523 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
5524 snd_hda_codec_write(codec, dac_idx, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
5528 static void alc861_auto_init_multi_out(struct hda_codec *codec)
5530 struct alc_spec *spec = codec->spec;
5533 for (i = 0; i < spec->autocfg.line_outs; i++) {
5534 hda_nid_t nid = spec->autocfg.line_out_pins[i];
5536 alc861_auto_set_output_and_unmute(codec, nid, PIN_OUT, spec->multiout.dac_nids[i]);
5540 static void alc861_auto_init_hp_out(struct hda_codec *codec)
5542 struct alc_spec *spec = codec->spec;
5545 pin = spec->autocfg.hp_pin;
5546 if (pin) /* connect to front */
5547 alc861_auto_set_output_and_unmute(codec, pin, PIN_HP, spec->multiout.dac_nids[0]);
5550 static void alc861_auto_init_analog_input(struct hda_codec *codec)
5552 struct alc_spec *spec = codec->spec;
5555 for (i = 0; i < AUTO_PIN_LAST; i++) {
5556 hda_nid_t nid = spec->autocfg.input_pins[i];
5557 if ((nid>=0x0c) && (nid <=0x11)) {
5558 snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
5559 i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
5564 /* parse the BIOS configuration and set up the alc_spec */
5565 /* return 1 if successful, 0 if the proper config is not found, or a negative error code */
5566 static int alc861_parse_auto_config(struct hda_codec *codec)
5568 struct alc_spec *spec = codec->spec;
5570 static hda_nid_t alc861_ignore[] = { 0x1d, 0 };
5572 if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
5573 alc861_ignore)) < 0)
5575 if (! spec->autocfg.line_outs)
5576 return 0; /* can't find valid BIOS pin config */
5578 if ((err = alc861_auto_fill_dac_nids(spec, &spec->autocfg)) < 0 ||
5579 (err = alc861_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
5580 (err = alc861_auto_create_hp_ctls(spec, spec->autocfg.hp_pin)) < 0 ||
5581 (err = alc861_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
5584 spec->multiout.max_channels = spec->multiout.num_dacs * 2;
5586 if (spec->autocfg.dig_out_pin)
5587 spec->multiout.dig_out_nid = ALC861_DIGOUT_NID;
5589 if (spec->kctl_alloc)
5590 spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
5592 spec->init_verbs[spec->num_init_verbs++] = alc861_auto_init_verbs;
5594 spec->num_mux_defs = 1;
5595 spec->input_mux = &spec->private_imux;
5597 spec->adc_nids = alc861_adc_nids;
5598 spec->num_adc_nids = ARRAY_SIZE(alc861_adc_nids);
5599 spec->mixers[spec->num_mixers] = alc861_capture_mixer;
5605 /* additional initialization for auto-configuration model */
5606 static void alc861_auto_init(struct hda_codec *codec)
5608 alc861_auto_init_multi_out(codec);
5609 alc861_auto_init_hp_out(codec);
5610 alc861_auto_init_analog_input(codec);
5615 * configuration and preset
5617 static struct hda_board_config alc861_cfg_tbl[] = {
5618 { .modelname = "3stack", .config = ALC861_3ST },
5619 { .pci_subvendor = 0x8086, .pci_subdevice = 0xd600, .config = ALC861_3ST },
5620 { .modelname = "3stack-dig", .config = ALC861_3ST_DIG },
5621 { .modelname = "6stack-dig", .config = ALC861_6ST_DIG },
5622 { .modelname = "auto", .config = ALC861_AUTO },
5626 static struct alc_config_preset alc861_presets[] = {
5628 .mixers = { alc861_3ST_mixer },
5629 .init_verbs = { alc861_threestack_init_verbs },
5630 .num_dacs = ARRAY_SIZE(alc861_dac_nids),
5631 .dac_nids = alc861_dac_nids,
5632 .num_channel_mode = ARRAY_SIZE(alc861_threestack_modes),
5633 .channel_mode = alc861_threestack_modes,
5634 .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
5635 .adc_nids = alc861_adc_nids,
5636 .input_mux = &alc861_capture_source,
5638 [ALC861_3ST_DIG] = {
5639 .mixers = { alc861_base_mixer },
5640 .init_verbs = { alc861_threestack_init_verbs },
5641 .num_dacs = ARRAY_SIZE(alc861_dac_nids),
5642 .dac_nids = alc861_dac_nids,
5643 .dig_out_nid = ALC861_DIGOUT_NID,
5644 .num_channel_mode = ARRAY_SIZE(alc861_threestack_modes),
5645 .channel_mode = alc861_threestack_modes,
5646 .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
5647 .adc_nids = alc861_adc_nids,
5648 .input_mux = &alc861_capture_source,
5650 [ALC861_6ST_DIG] = {
5651 .mixers = { alc861_base_mixer },
5652 .init_verbs = { alc861_base_init_verbs },
5653 .num_dacs = ARRAY_SIZE(alc861_dac_nids),
5654 .dac_nids = alc861_dac_nids,
5655 .dig_out_nid = ALC861_DIGOUT_NID,
5656 .num_channel_mode = ARRAY_SIZE(alc861_8ch_modes),
5657 .channel_mode = alc861_8ch_modes,
5658 .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
5659 .adc_nids = alc861_adc_nids,
5660 .input_mux = &alc861_capture_source,
5665 static int patch_alc861(struct hda_codec *codec)
5667 struct alc_spec *spec;
5671 spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
5677 board_config = snd_hda_check_board_config(codec, alc861_cfg_tbl);
5678 if (board_config < 0 || board_config >= ALC861_MODEL_LAST) {
5679 printk(KERN_INFO "hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...\n");
5680 board_config = ALC861_AUTO;
5683 if (board_config == ALC861_AUTO) {
5684 /* automatic parse from the BIOS config */
5685 err = alc861_parse_auto_config(codec);
5690 printk(KERN_INFO "hda_codec: Cannot set up configuration from BIOS. Using base mode...\n");
5691 board_config = ALC861_3ST_DIG;
5695 if (board_config != ALC861_AUTO)
5696 setup_preset(spec, &alc861_presets[board_config]);
5698 spec->stream_name_analog = "ALC861 Analog";
5699 spec->stream_analog_playback = &alc861_pcm_analog_playback;
5700 spec->stream_analog_capture = &alc861_pcm_analog_capture;
5702 spec->stream_name_digital = "ALC861 Digital";
5703 spec->stream_digital_playback = &alc861_pcm_digital_playback;
5704 spec->stream_digital_capture = &alc861_pcm_digital_capture;
5706 codec->patch_ops = alc_patch_ops;
5707 if (board_config == ALC861_AUTO)
5708 spec->init_hook = alc861_auto_init;
5716 struct hda_codec_preset snd_hda_preset_realtek[] = {
5717 { .id = 0x10ec0260, .name = "ALC260", .patch = patch_alc260 },
5718 { .id = 0x10ec0262, .name = "ALC262", .patch = patch_alc262 },
5719 { .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
5720 { .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
5721 { .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc882 },
5722 { .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 },
5723 { .id = 0x10ec0861, .name = "ALC861", .patch = patch_alc861 },