git.oblomov.eu Git - linux-2.6/blob - drivers/media/video/saa7115.c

   1 /* saa711x - Philips SAA711x video decoder driver
   2  * This driver can work with saa7111, saa7111a, saa7113, saa7114,
   3  *                           saa7115 and saa7118.
   4  *
   5  * Based on saa7114 driver by Maxim Yevtyushkin, which is based on
   6  * the saa7111 driver by Dave Perks.
   7  *
   8  * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
   9  * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com>
  10  *
  11  * Slight changes for video timing and attachment output by
  12  * Wolfgang Scherr <scherr@net4you.net>
  13  *
  14  * Moved over to the linux >= 2.4.x i2c protocol (1/1/2003)
  15  * by Ronald Bultje <rbultje@ronald.bitfreak.net>
  16  *
  17  * Added saa7115 support by Kevin Thayer <nufan_wfk at yahoo.com>
  18  * (2/17/2003)
  19  *
  20  * VBI support (2004) and cleanups (2005) by Hans Verkuil <hverkuil@xs4all.nl>
  21  *
  22  * Copyright (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org>
  23  *      SAA7111, SAA7113 and SAA7118 support
  24  *
  25  * This program is free software; you can redistribute it and/or
  26  * modify it under the terms of the GNU General Public License
  27  * as published by the Free Software Foundation; either version 2
  28  * of the License, or (at your option) any later version.
  29  *
  30  * This program is distributed in the hope that it will be useful,
  31  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  32  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  33  * GNU General Public License for more details.
  34  *
  35  * You should have received a copy of the GNU General Public License
  36  * along with this program; if not, write to the Free Software
  37  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  38  */
  39
  40 #include "saa711x_regs.h"
  41
  42 #include <linux/kernel.h>
  43 #include <linux/module.h>
  44 #include <linux/slab.h>
  45 #include <linux/i2c.h>
  46 #include <linux/videodev2.h>
  47 #include <media/v4l2-common.h>
  48 #include <media/v4l2-chip-ident.h>
  49 #include <media/v4l2-i2c-drv-legacy.h>
  50 #include <media/saa7115.h>
  51 #include <asm/div64.h>
  52
  53 #define VRES_60HZ       (480+16)
  54
  55 MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver");
  56 MODULE_AUTHOR(  "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, "
  57                 "Hans Verkuil, Mauro Carvalho Chehab");
  58 MODULE_LICENSE("GPL");
  59
  60 static int debug = 0;
  61 module_param(debug, bool, 0644);
  62
  63 MODULE_PARM_DESC(debug, "Debug level (0-1)");
  64
  65 static unsigned short normal_i2c[] = {
  66                 0x4a >> 1, 0x48 >> 1,   /* SAA7111, SAA7111A and SAA7113 */
  67                 0x42 >> 1, 0x40 >> 1,   /* SAA7114, SAA7115 and SAA7118 */
  68                 I2C_CLIENT_END };
  69
  70
  71 I2C_CLIENT_INSMOD;
  72
  73 struct saa711x_state {
  74         v4l2_std_id std;
  75         int input;
  76         int output;
  77         int enable;
  78         int radio;
  79         int bright;
  80         int contrast;
  81         int hue;
  82         int sat;
  83         int width;
  84         int height;
  85         u32 ident;
  86         u32 audclk_freq;
  87         u32 crystal_freq;
  88         u8 ucgc;
  89         u8 cgcdiv;
  90         u8 apll;
  91 };
  92
  93 /* ----------------------------------------------------------------------- */
  94
  95 static inline int saa711x_write(struct i2c_client *client, u8 reg, u8 value)
  96 {
  97         return i2c_smbus_write_byte_data(client, reg, value);
  98 }
  99
 100 /* Sanity routine to check if a register is present */
 101 static int saa711x_has_reg(const int id, const u8 reg)
 102 {
 103         if (id == V4L2_IDENT_SAA7111)
 104                 return reg < 0x20 && reg != 0x01 && reg != 0x0f &&
 105                        (reg < 0x13 || reg > 0x19) && reg != 0x1d && reg != 0x1e;
 106
 107         /* common for saa7113/4/5/8 */
 108         if (unlikely((reg >= 0x3b && reg <= 0x3f) || reg == 0x5c || reg == 0x5f ||
 109             reg == 0xa3 || reg == 0xa7 || reg == 0xab || reg == 0xaf || (reg >= 0xb5 && reg <= 0xb7) ||
 110             reg == 0xd3 || reg == 0xd7 || reg == 0xdb || reg == 0xdf || (reg >= 0xe5 && reg <= 0xe7) ||
 111             reg == 0x82 || (reg >= 0x89 && reg <= 0x8e)))
 112                 return 0;
 113
 114         switch (id) {
 115         case V4L2_IDENT_SAA7113:
 116                 return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) &&
 117                        reg != 0x5d && reg < 0x63;
 118         case V4L2_IDENT_SAA7114:
 119                 return (reg < 0x1a || reg > 0x1e) && (reg < 0x20 || reg > 0x2f) &&
 120                        (reg < 0x63 || reg > 0x7f) && reg != 0x33 && reg != 0x37 &&
 121                        reg != 0x81 && reg < 0xf0;
 122         case V4L2_IDENT_SAA7115:
 123                 return (reg < 0x20 || reg > 0x2f) && reg != 0x65 && (reg < 0xfc || reg > 0xfe);
 124         case V4L2_IDENT_SAA7118:
 125                 return (reg < 0x1a || reg > 0x1d) && (reg < 0x20 || reg > 0x22) &&
 126                        (reg < 0x26 || reg > 0x28) && reg != 0x33 && reg != 0x37 &&
 127                        (reg < 0x63 || reg > 0x7f) && reg != 0x81 && reg < 0xf0;
 128         }
 129         return 1;
 130 }
 131
 132 static int saa711x_writeregs(struct i2c_client *client, const unsigned char *regs)
 133 {
 134         struct saa711x_state *state = i2c_get_clientdata(client);
 135         unsigned char reg, data;
 136
 137         while (*regs != 0x00) {
 138                 reg = *(regs++);
 139                 data = *(regs++);
 140
 141                 /* According with datasheets, reserved regs should be
 142                    filled with 0 - seems better not to touch on they */
 143                 if (saa711x_has_reg(state->ident,reg)) {
 144                         if (saa711x_write(client, reg, data) < 0)
 145                                 return -1;
 146                 } else {
 147                         v4l_dbg(1, debug, client, "tried to access reserved reg 0x%02x\n", reg);
 148                 }
 149         }
 150         return 0;
 151 }
 152
 153 static inline int saa711x_read(struct i2c_client *client, u8 reg)
 154 {
 155         return i2c_smbus_read_byte_data(client, reg);
 156 }
 157
 158 /* ----------------------------------------------------------------------- */
 159
 160 /* SAA7111 initialization table */
 161 static const unsigned char saa7111_init[] = {
 162         R_01_INC_DELAY, 0x00,           /* reserved */
 163
 164         /*front end */
 165         R_02_INPUT_CNTL_1, 0xd0,        /* FUSE=3, GUDL=2, MODE=0 */
 166         R_03_INPUT_CNTL_2, 0x23,        /* HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0,
 167                                          * GAFIX=0, GAI1=256, GAI2=256 */
 168         R_04_INPUT_CNTL_3, 0x00,        /* GAI1=256 */
 169         R_05_INPUT_CNTL_4, 0x00,        /* GAI2=256 */
 170
 171         /* decoder */
 172         R_06_H_SYNC_START, 0xf3,        /* HSB at  13(50Hz) /  17(60Hz)
 173                                          * pixels after end of last line */
 174         R_07_H_SYNC_STOP, 0xe8,         /* HSS seems to be needed to
 175                                          * work with NTSC, too */
 176         R_08_SYNC_CNTL, 0xc8,           /* AUFD=1, FSEL=1, EXFIL=0,
 177                                          * VTRC=1, HPLL=0, VNOI=0 */
 178         R_09_LUMA_CNTL, 0x01,           /* BYPS=0, PREF=0, BPSS=0,
 179                                          * VBLB=0, UPTCV=0, APER=1 */
 180         R_0A_LUMA_BRIGHT_CNTL, 0x80,
 181         R_0B_LUMA_CONTRAST_CNTL, 0x47,  /* 0b - CONT=1.109 */
 182         R_0C_CHROMA_SAT_CNTL, 0x40,
 183         R_0D_CHROMA_HUE_CNTL, 0x00,
 184         R_0E_CHROMA_CNTL_1, 0x01,       /* 0e - CDTO=0, CSTD=0, DCCF=0,
 185                                          * FCTC=0, CHBW=1 */
 186         R_0F_CHROMA_GAIN_CNTL, 0x00,    /* reserved */
 187         R_10_CHROMA_CNTL_2, 0x48,       /* 10 - OFTS=1, HDEL=0, VRLN=1, YDEL=0 */
 188         R_11_MODE_DELAY_CNTL, 0x1c,     /* 11 - GPSW=0, CM99=0, FECO=0, COMPO=1,
 189                                          * OEYC=1, OEHV=1, VIPB=0, COLO=0 */
 190         R_12_RT_SIGNAL_CNTL, 0x00,      /* 12 - output control 2 */
 191         R_13_RT_X_PORT_OUT_CNTL, 0x00,  /* 13 - output control 3 */
 192         R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
 193         R_15_VGATE_START_FID_CHG, 0x00,
 194         R_16_VGATE_STOP, 0x00,
 195         R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
 196
 197         0x00, 0x00
 198 };
 199
 200 /* SAA7113 init codes */
 201 static const unsigned char saa7113_init[] = {
 202         R_01_INC_DELAY, 0x08,
 203         R_02_INPUT_CNTL_1, 0xc2,
 204         R_03_INPUT_CNTL_2, 0x30,
 205         R_04_INPUT_CNTL_3, 0x00,
 206         R_05_INPUT_CNTL_4, 0x00,
 207         R_06_H_SYNC_START, 0x89,
 208         R_07_H_SYNC_STOP, 0x0d,
 209         R_08_SYNC_CNTL, 0x88,
 210         R_09_LUMA_CNTL, 0x01,
 211         R_0A_LUMA_BRIGHT_CNTL, 0x80,
 212         R_0B_LUMA_CONTRAST_CNTL, 0x47,
 213         R_0C_CHROMA_SAT_CNTL, 0x40,
 214         R_0D_CHROMA_HUE_CNTL, 0x00,
 215         R_0E_CHROMA_CNTL_1, 0x01,
 216         R_0F_CHROMA_GAIN_CNTL, 0x2a,
 217         R_10_CHROMA_CNTL_2, 0x08,
 218         R_11_MODE_DELAY_CNTL, 0x0c,
 219         R_12_RT_SIGNAL_CNTL, 0x07,
 220         R_13_RT_X_PORT_OUT_CNTL, 0x00,
 221         R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
 222         R_15_VGATE_START_FID_CHG, 0x00,
 223         R_16_VGATE_STOP, 0x00,
 224         R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
 225
 226         0x00, 0x00
 227 };
 228
 229 /* If a value differs from the Hauppauge driver values, then the comment starts with
 230    'was 0xXX' to denote the Hauppauge value. Otherwise the value is identical to what the
 231    Hauppauge driver sets. */
 232
 233 /* SAA7114 and SAA7115 initialization table */
 234 static const unsigned char saa7115_init_auto_input[] = {
 235                 /* Front-End Part */
 236         R_01_INC_DELAY, 0x48,                   /* white peak control disabled */
 237         R_03_INPUT_CNTL_2, 0x20,                /* was 0x30. 0x20: long vertical blanking */
 238         R_04_INPUT_CNTL_3, 0x90,                /* analog gain set to 0 */
 239         R_05_INPUT_CNTL_4, 0x90,                /* analog gain set to 0 */
 240                 /* Decoder Part */
 241         R_06_H_SYNC_START, 0xeb,                /* horiz sync begin = -21 */
 242         R_07_H_SYNC_STOP, 0xe0,                 /* horiz sync stop = -17 */
 243         R_09_LUMA_CNTL, 0x53,                   /* 0x53, was 0x56 for 60hz. luminance control */
 244         R_0A_LUMA_BRIGHT_CNTL, 0x80,            /* was 0x88. decoder brightness, 0x80 is itu standard */
 245         R_0B_LUMA_CONTRAST_CNTL, 0x44,          /* was 0x48. decoder contrast, 0x44 is itu standard */
 246         R_0C_CHROMA_SAT_CNTL, 0x40,             /* was 0x47. decoder saturation, 0x40 is itu standard */
 247         R_0D_CHROMA_HUE_CNTL, 0x00,
 248         R_0F_CHROMA_GAIN_CNTL, 0x00,            /* use automatic gain  */
 249         R_10_CHROMA_CNTL_2, 0x06,               /* chroma: active adaptive combfilter */
 250         R_11_MODE_DELAY_CNTL, 0x00,
 251         R_12_RT_SIGNAL_CNTL, 0x9d,              /* RTS0 output control: VGATE */
 252         R_13_RT_X_PORT_OUT_CNTL, 0x80,          /* ITU656 standard mode, RTCO output enable RTCE */
 253         R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
 254         R_18_RAW_DATA_GAIN_CNTL, 0x40,          /* gain 0x00 = nominal */
 255         R_19_RAW_DATA_OFF_CNTL, 0x80,
 256         R_1A_COLOR_KILL_LVL_CNTL, 0x77,         /* recommended value */
 257         R_1B_MISC_TVVCRDET, 0x42,               /* recommended value */
 258         R_1C_ENHAN_COMB_CTRL1, 0xa9,            /* recommended value */
 259         R_1D_ENHAN_COMB_CTRL2, 0x01,            /* recommended value */
 260
 261
 262         R_80_GLOBAL_CNTL_1, 0x0,                /* No tasks enabled at init */
 263
 264                 /* Power Device Control */
 265         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,    /* reset device */
 266         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,    /* set device programmed, all in operational mode */
 267         0x00, 0x00
 268 };
 269
 270 /* Used to reset saa7113, saa7114 and saa7115 */
 271 static const unsigned char saa7115_cfg_reset_scaler[] = {
 272         R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00,    /* disable I-port output */
 273         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,            /* reset scaler */
 274         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,            /* activate scaler */
 275         R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,    /* enable I-port output */
 276         0x00, 0x00
 277 };
 278
 279 /* ============== SAA7715 VIDEO templates =============  */
 280
 281 static const unsigned char saa7115_cfg_60hz_video[] = {
 282         R_80_GLOBAL_CNTL_1, 0x00,                       /* reset tasks */
 283         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,            /* reset scaler */
 284
 285         R_15_VGATE_START_FID_CHG, 0x03,
 286         R_16_VGATE_STOP, 0x11,
 287         R_17_MISC_VGATE_CONF_AND_MSB, 0x9c,
 288
 289         R_08_SYNC_CNTL, 0x68,                   /* 0xBO: auto detection, 0x68 = NTSC */
 290         R_0E_CHROMA_CNTL_1, 0x07,               /* video autodetection is on */
 291
 292         R_5A_V_OFF_FOR_SLICER, 0x06,            /* standard 60hz value for ITU656 line counting */
 293
 294         /* Task A */
 295         R_90_A_TASK_HANDLING_CNTL, 0x80,
 296         R_91_A_X_PORT_FORMATS_AND_CONF, 0x48,
 297         R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40,
 298         R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84,
 299
 300         /* hoffset low (input), 0x0002 is minimum */
 301         R_94_A_HORIZ_INPUT_WINDOW_START, 0x01,
 302         R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
 303
 304         /* hsize low (input), 0x02d0 = 720 */
 305         R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
 306         R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
 307
 308         R_98_A_VERT_INPUT_WINDOW_START, 0x05,
 309         R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00,
 310
 311         R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x0c,
 312         R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00,
 313
 314         R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0,
 315         R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05,
 316
 317         R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x0c,
 318         R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00,
 319
 320         /* Task B */
 321         R_C0_B_TASK_HANDLING_CNTL, 0x00,
 322         R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08,
 323         R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00,
 324         R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80,
 325
 326         /* 0x0002 is minimum */
 327         R_C4_B_HORIZ_INPUT_WINDOW_START, 0x02,
 328         R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
 329
 330         /* 0x02d0 = 720 */
 331         R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
 332         R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
 333
 334         /* vwindow start 0x12 = 18 */
 335         R_C8_B_VERT_INPUT_WINDOW_START, 0x12,
 336         R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00,
 337
 338         /* vwindow length 0xf8 = 248 */
 339         R_CA_B_VERT_INPUT_WINDOW_LENGTH, VRES_60HZ>>1,
 340         R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, VRES_60HZ>>9,
 341
 342         /* hwindow 0x02d0 = 720 */
 343         R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0,
 344         R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02,
 345
 346         R_F0_LFCO_PER_LINE, 0xad,               /* Set PLL Register. 60hz 525 lines per frame, 27 MHz */
 347         R_F1_P_I_PARAM_SELECT, 0x05,            /* low bit with 0xF0 */
 348         R_F5_PULSGEN_LINE_LENGTH, 0xad,
 349         R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01,
 350
 351         0x00, 0x00
 352 };
 353
 354 static const unsigned char saa7115_cfg_50hz_video[] = {
 355         R_80_GLOBAL_CNTL_1, 0x00,
 356         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,    /* reset scaler */
 357
 358         R_15_VGATE_START_FID_CHG, 0x37,         /* VGATE start */
 359         R_16_VGATE_STOP, 0x16,
 360         R_17_MISC_VGATE_CONF_AND_MSB, 0x99,
 361
 362         R_08_SYNC_CNTL, 0x28,                   /* 0x28 = PAL */
 363         R_0E_CHROMA_CNTL_1, 0x07,
 364
 365         R_5A_V_OFF_FOR_SLICER, 0x03,            /* standard 50hz value */
 366
 367         /* Task A */
 368         R_90_A_TASK_HANDLING_CNTL, 0x81,
 369         R_91_A_X_PORT_FORMATS_AND_CONF, 0x48,
 370         R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40,
 371         R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84,
 372
 373         /* This is weird: the datasheet says that you should use 2 as the minimum value, */
 374         /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */
 375         /* hoffset low (input), 0x0002 is minimum */
 376         R_94_A_HORIZ_INPUT_WINDOW_START, 0x00,
 377         R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
 378
 379         /* hsize low (input), 0x02d0 = 720 */
 380         R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
 381         R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
 382
 383         R_98_A_VERT_INPUT_WINDOW_START, 0x03,
 384         R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00,
 385
 386         /* vsize 0x12 = 18 */
 387         R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x12,
 388         R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00,
 389
 390         /* hsize 0x05a0 = 1440 */
 391         R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0,
 392         R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05,    /* hsize hi (output) */
 393         R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x12,         /* vsize low (output), 0x12 = 18 */
 394         R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00,     /* vsize hi (output) */
 395
 396         /* Task B */
 397         R_C0_B_TASK_HANDLING_CNTL, 0x00,
 398         R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08,
 399         R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00,
 400         R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80,
 401
 402         /* This is weird: the datasheet says that you should use 2 as the minimum value, */
 403         /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */
 404         /* hoffset low (input), 0x0002 is minimum. See comment above. */
 405         R_C4_B_HORIZ_INPUT_WINDOW_START, 0x00,
 406         R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
 407
 408         /* hsize 0x02d0 = 720 */
 409         R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
 410         R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
 411
 412         /* voffset 0x16 = 22 */
 413         R_C8_B_VERT_INPUT_WINDOW_START, 0x16,
 414         R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00,
 415
 416         /* vsize 0x0120 = 288 */
 417         R_CA_B_VERT_INPUT_WINDOW_LENGTH, 0x20,
 418         R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, 0x01,
 419
 420         /* hsize 0x02d0 = 720 */
 421         R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0,
 422         R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02,
 423
 424         R_F0_LFCO_PER_LINE, 0xb0,               /* Set PLL Register. 50hz 625 lines per frame, 27 MHz */
 425         R_F1_P_I_PARAM_SELECT, 0x05,            /* low bit with 0xF0, (was 0x05) */
 426         R_F5_PULSGEN_LINE_LENGTH, 0xb0,
 427         R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01,
 428
 429         0x00, 0x00
 430 };
 431
 432 /* ============== SAA7715 VIDEO templates (end) =======  */
 433
 434 static const unsigned char saa7115_cfg_vbi_on[] = {
 435         R_80_GLOBAL_CNTL_1, 0x00,                       /* reset tasks */
 436         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,            /* reset scaler */
 437         R_80_GLOBAL_CNTL_1, 0x30,                       /* Activate both tasks */
 438         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,            /* activate scaler */
 439         R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,    /* Enable I-port output */
 440
 441         0x00, 0x00
 442 };
 443
 444 static const unsigned char saa7115_cfg_vbi_off[] = {
 445         R_80_GLOBAL_CNTL_1, 0x00,                       /* reset tasks */
 446         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,            /* reset scaler */
 447         R_80_GLOBAL_CNTL_1, 0x20,                       /* Activate only task "B" */
 448         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,            /* activate scaler */
 449         R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,    /* Enable I-port output */
 450
 451         0x00, 0x00
 452 };
 453
 454
 455 static const unsigned char saa7115_init_misc[] = {
 456         R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F, 0x01,
 457         R_83_X_PORT_I_O_ENA_AND_OUT_CLK, 0x01,
 458         R_84_I_PORT_SIGNAL_DEF, 0x20,
 459         R_85_I_PORT_SIGNAL_POLAR, 0x21,
 460         R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT, 0xc5,
 461         R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,
 462
 463         /* Task A */
 464         R_A0_A_HORIZ_PRESCALING, 0x01,
 465         R_A1_A_ACCUMULATION_LENGTH, 0x00,
 466         R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00,
 467
 468         /* Configure controls at nominal value*/
 469         R_A4_A_LUMA_BRIGHTNESS_CNTL, 0x80,
 470         R_A5_A_LUMA_CONTRAST_CNTL, 0x40,
 471         R_A6_A_CHROMA_SATURATION_CNTL, 0x40,
 472
 473         /* note: 2 x zoom ensures that VBI lines have same length as video lines. */
 474         R_A8_A_HORIZ_LUMA_SCALING_INC, 0x00,
 475         R_A9_A_HORIZ_LUMA_SCALING_INC_MSB, 0x02,
 476
 477         R_AA_A_HORIZ_LUMA_PHASE_OFF, 0x00,
 478
 479         /* must be horiz lum scaling / 2 */
 480         R_AC_A_HORIZ_CHROMA_SCALING_INC, 0x00,
 481         R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB, 0x01,
 482
 483         /* must be offset luma / 2 */
 484         R_AE_A_HORIZ_CHROMA_PHASE_OFF, 0x00,
 485
 486         R_B0_A_VERT_LUMA_SCALING_INC, 0x00,
 487         R_B1_A_VERT_LUMA_SCALING_INC_MSB, 0x04,
 488
 489         R_B2_A_VERT_CHROMA_SCALING_INC, 0x00,
 490         R_B3_A_VERT_CHROMA_SCALING_INC_MSB, 0x04,
 491
 492         R_B4_A_VERT_SCALING_MODE_CNTL, 0x01,
 493
 494         R_B8_A_VERT_CHROMA_PHASE_OFF_00, 0x00,
 495         R_B9_A_VERT_CHROMA_PHASE_OFF_01, 0x00,
 496         R_BA_A_VERT_CHROMA_PHASE_OFF_10, 0x00,
 497         R_BB_A_VERT_CHROMA_PHASE_OFF_11, 0x00,
 498
 499         R_BC_A_VERT_LUMA_PHASE_OFF_00, 0x00,
 500         R_BD_A_VERT_LUMA_PHASE_OFF_01, 0x00,
 501         R_BE_A_VERT_LUMA_PHASE_OFF_10, 0x00,
 502         R_BF_A_VERT_LUMA_PHASE_OFF_11, 0x00,
 503
 504         /* Task B */
 505         R_D0_B_HORIZ_PRESCALING, 0x01,
 506         R_D1_B_ACCUMULATION_LENGTH, 0x00,
 507         R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00,
 508
 509         /* Configure controls at nominal value*/
 510         R_D4_B_LUMA_BRIGHTNESS_CNTL, 0x80,
 511         R_D5_B_LUMA_CONTRAST_CNTL, 0x40,
 512         R_D6_B_CHROMA_SATURATION_CNTL, 0x40,
 513
 514         /* hor lum scaling 0x0400 = 1 */
 515         R_D8_B_HORIZ_LUMA_SCALING_INC, 0x00,
 516         R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, 0x04,
 517
 518         R_DA_B_HORIZ_LUMA_PHASE_OFF, 0x00,
 519
 520         /* must be hor lum scaling / 2 */
 521         R_DC_B_HORIZ_CHROMA_SCALING, 0x00,
 522         R_DD_B_HORIZ_CHROMA_SCALING_MSB, 0x02,
 523
 524         /* must be offset luma / 2 */
 525         R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA, 0x00,
 526
 527         R_E0_B_VERT_LUMA_SCALING_INC, 0x00,
 528         R_E1_B_VERT_LUMA_SCALING_INC_MSB, 0x04,
 529
 530         R_E2_B_VERT_CHROMA_SCALING_INC, 0x00,
 531         R_E3_B_VERT_CHROMA_SCALING_INC_MSB, 0x04,
 532
 533         R_E4_B_VERT_SCALING_MODE_CNTL, 0x01,
 534
 535         R_E8_B_VERT_CHROMA_PHASE_OFF_00, 0x00,
 536         R_E9_B_VERT_CHROMA_PHASE_OFF_01, 0x00,
 537         R_EA_B_VERT_CHROMA_PHASE_OFF_10, 0x00,
 538         R_EB_B_VERT_CHROMA_PHASE_OFF_11, 0x00,
 539
 540         R_EC_B_VERT_LUMA_PHASE_OFF_00, 0x00,
 541         R_ED_B_VERT_LUMA_PHASE_OFF_01, 0x00,
 542         R_EE_B_VERT_LUMA_PHASE_OFF_10, 0x00,
 543         R_EF_B_VERT_LUMA_PHASE_OFF_11, 0x00,
 544
 545         R_F2_NOMINAL_PLL2_DTO, 0x50,            /* crystal clock = 24.576 MHz, target = 27MHz */
 546         R_F3_PLL_INCREMENT, 0x46,
 547         R_F4_PLL2_STATUS, 0x00,
 548         R_F7_PULSE_A_POS_MSB, 0x4b,             /* not the recommended settings! */
 549         R_F8_PULSE_B_POS, 0x00,
 550         R_F9_PULSE_B_POS_MSB, 0x4b,
 551         R_FA_PULSE_C_POS, 0x00,
 552         R_FB_PULSE_C_POS_MSB, 0x4b,
 553
 554         /* PLL2 lock detection settings: 71 lines 50% phase error */
 555         R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES, 0x88,
 556
 557         /* Turn off VBI */
 558         R_40_SLICER_CNTL_1, 0x20,             /* No framing code errors allowed. */
 559         R_41_LCR_BASE, 0xff,
 560         R_41_LCR_BASE+1, 0xff,
 561         R_41_LCR_BASE+2, 0xff,
 562         R_41_LCR_BASE+3, 0xff,
 563         R_41_LCR_BASE+4, 0xff,
 564         R_41_LCR_BASE+5, 0xff,
 565         R_41_LCR_BASE+6, 0xff,
 566         R_41_LCR_BASE+7, 0xff,
 567         R_41_LCR_BASE+8, 0xff,
 568         R_41_LCR_BASE+9, 0xff,
 569         R_41_LCR_BASE+10, 0xff,
 570         R_41_LCR_BASE+11, 0xff,
 571         R_41_LCR_BASE+12, 0xff,
 572         R_41_LCR_BASE+13, 0xff,
 573         R_41_LCR_BASE+14, 0xff,
 574         R_41_LCR_BASE+15, 0xff,
 575         R_41_LCR_BASE+16, 0xff,
 576         R_41_LCR_BASE+17, 0xff,
 577         R_41_LCR_BASE+18, 0xff,
 578         R_41_LCR_BASE+19, 0xff,
 579         R_41_LCR_BASE+20, 0xff,
 580         R_41_LCR_BASE+21, 0xff,
 581         R_41_LCR_BASE+22, 0xff,
 582         R_58_PROGRAM_FRAMING_CODE, 0x40,
 583         R_59_H_OFF_FOR_SLICER, 0x47,
 584         R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF, 0x83,
 585         R_5D_DID, 0xbd,
 586         R_5E_SDID, 0x35,
 587
 588         R_02_INPUT_CNTL_1, 0x84,                /* input tuner -> input 4, amplifier active */
 589
 590         R_80_GLOBAL_CNTL_1, 0x20,               /* enable task B */
 591         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,
 592         R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,
 593         0x00, 0x00
 594 };
 595
 596 static int saa711x_odd_parity(u8 c)
 597 {
 598         c ^= (c >> 4);
 599         c ^= (c >> 2);
 600         c ^= (c >> 1);
 601
 602         return c & 1;
 603 }
 604
 605 static int saa711x_decode_vps(u8 * dst, u8 * p)
 606 {
 607         static const u8 biphase_tbl[] = {
 608                 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
 609                 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
 610                 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
 611                 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
 612                 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
 613                 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
 614                 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
 615                 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
 616                 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
 617                 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
 618                 0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87,
 619                 0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3,
 620                 0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85,
 621                 0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1,
 622                 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
 623                 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
 624                 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
 625                 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
 626                 0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86,
 627                 0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2,
 628                 0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84,
 629                 0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0,
 630                 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
 631                 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
 632                 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
 633                 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
 634                 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
 635                 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
 636                 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
 637                 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
 638                 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
 639                 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
 640         };
 641         int i;
 642         u8 c, err = 0;
 643
 644         for (i = 0; i < 2 * 13; i += 2) {
 645                 err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]];
 646                 c = (biphase_tbl[p[i + 1]] & 0xf) | ((biphase_tbl[p[i]] & 0xf) << 4);
 647                 dst[i / 2] = c;
 648         }
 649         return err & 0xf0;
 650 }
 651
 652 static int saa711x_decode_wss(u8 * p)
 653 {
 654         static const int wss_bits[8] = {
 655                 0, 0, 0, 1, 0, 1, 1, 1
 656         };
 657         unsigned char parity;
 658         int wss = 0;
 659         int i;
 660
 661         for (i = 0; i < 16; i++) {
 662                 int b1 = wss_bits[p[i] & 7];
 663                 int b2 = wss_bits[(p[i] >> 3) & 7];
 664
 665                 if (b1 == b2)
 666                         return -1;
 667                 wss |= b2 << i;
 668         }
 669         parity = wss & 15;
 670         parity ^= parity >> 2;
 671         parity ^= parity >> 1;
 672
 673         if (!(parity & 1))
 674                 return -1;
 675
 676         return wss;
 677 }
 678
 679 static int saa711x_set_audio_clock_freq(struct i2c_client *client, u32 freq)
 680 {
 681         struct saa711x_state *state = i2c_get_clientdata(client);
 682         u32 acpf;
 683         u32 acni;
 684         u32 hz;
 685         u64 f;
 686         u8 acc = 0;     /* reg 0x3a, audio clock control */
 687
 688         /* Checks for chips that don't have audio clock (saa7111, saa7113) */
 689         if (!saa711x_has_reg(state->ident,R_30_AUD_MAST_CLK_CYCLES_PER_FIELD))
 690                 return 0;
 691
 692         v4l_dbg(1, debug, client, "set audio clock freq: %d\n", freq);
 693
 694         /* sanity check */
 695         if (freq < 32000 || freq > 48000)
 696                 return -EINVAL;
 697
 698         /* hz is the refresh rate times 100 */
 699         hz = (state->std & V4L2_STD_525_60) ? 5994 : 5000;
 700         /* acpf = (256 * freq) / field_frequency == (256 * 100 * freq) / hz */
 701         acpf = (25600 * freq) / hz;
 702         /* acni = (256 * freq * 2^23) / crystal_frequency =
 703                   (freq * 2^(8+23)) / crystal_frequency =
 704                   (freq << 31) / crystal_frequency */
 705         f = freq;
 706         f = f << 31;
 707         do_div(f, state->crystal_freq);
 708         acni = f;
 709         if (state->ucgc) {
 710                 acpf = acpf * state->cgcdiv / 16;
 711                 acni = acni * state->cgcdiv / 16;
 712                 acc = 0x80;
 713                 if (state->cgcdiv == 3)
 714                         acc |= 0x40;
 715         }
 716         if (state->apll)
 717                 acc |= 0x08;
 718
 719         saa711x_write(client, R_38_CLK_RATIO_AMXCLK_TO_ASCLK, 0x03);
 720         saa711x_write(client, R_39_CLK_RATIO_ASCLK_TO_ALRCLK, 0x10);
 721         saa711x_write(client, R_3A_AUD_CLK_GEN_BASIC_SETUP, acc);
 722
 723         saa711x_write(client, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD, acpf & 0xff);
 724         saa711x_write(client, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+1,
 725                                                         (acpf >> 8) & 0xff);
 726         saa711x_write(client, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+2,
 727                                                         (acpf >> 16) & 0x03);
 728
 729         saa711x_write(client, R_34_AUD_MAST_CLK_NOMINAL_INC, acni & 0xff);
 730         saa711x_write(client, R_34_AUD_MAST_CLK_NOMINAL_INC+1, (acni >> 8) & 0xff);
 731         saa711x_write(client, R_34_AUD_MAST_CLK_NOMINAL_INC+2, (acni >> 16) & 0x3f);
 732         state->audclk_freq = freq;
 733         return 0;
 734 }
 735
 736 static int saa711x_set_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl)
 737 {
 738         struct saa711x_state *state = i2c_get_clientdata(client);
 739
 740         switch (ctrl->id) {
 741         case V4L2_CID_BRIGHTNESS:
 742                 if (ctrl->value < 0 || ctrl->value > 255) {
 743                         v4l_err(client, "invalid brightness setting %d\n", ctrl->value);
 744                         return -ERANGE;
 745                 }
 746
 747                 state->bright = ctrl->value;
 748                 saa711x_write(client, R_0A_LUMA_BRIGHT_CNTL, state->bright);
 749                 break;
 750
 751         case V4L2_CID_CONTRAST:
 752                 if (ctrl->value < 0 || ctrl->value > 127) {
 753                         v4l_err(client, "invalid contrast setting %d\n", ctrl->value);
 754                         return -ERANGE;
 755                 }
 756
 757                 state->contrast = ctrl->value;
 758                 saa711x_write(client, R_0B_LUMA_CONTRAST_CNTL, state->contrast);
 759                 break;
 760
 761         case V4L2_CID_SATURATION:
 762                 if (ctrl->value < 0 || ctrl->value > 127) {
 763                         v4l_err(client, "invalid saturation setting %d\n", ctrl->value);
 764                         return -ERANGE;
 765                 }
 766
 767                 state->sat = ctrl->value;
 768                 saa711x_write(client, R_0C_CHROMA_SAT_CNTL, state->sat);
 769                 break;
 770
 771         case V4L2_CID_HUE:
 772                 if (ctrl->value < -127 || ctrl->value > 127) {
 773                         v4l_err(client, "invalid hue setting %d\n", ctrl->value);
 774                         return -ERANGE;
 775                 }
 776
 777                 state->hue = ctrl->value;
 778                 saa711x_write(client, R_0D_CHROMA_HUE_CNTL, state->hue);
 779                 break;
 780
 781         default:
 782                 return -EINVAL;
 783         }
 784
 785         return 0;
 786 }
 787
 788 static int saa711x_get_v4lctrl(struct i2c_client *client, struct v4l2_control *ctrl)
 789 {
 790         struct saa711x_state *state = i2c_get_clientdata(client);
 791
 792         switch (ctrl->id) {
 793         case V4L2_CID_BRIGHTNESS:
 794                 ctrl->value = state->bright;
 795                 break;
 796         case V4L2_CID_CONTRAST:
 797                 ctrl->value = state->contrast;
 798                 break;
 799         case V4L2_CID_SATURATION:
 800                 ctrl->value = state->sat;
 801                 break;
 802         case V4L2_CID_HUE:
 803                 ctrl->value = state->hue;
 804                 break;
 805         default:
 806                 return -EINVAL;
 807         }
 808
 809         return 0;
 810 }
 811
 812 static int saa711x_set_size(struct i2c_client *client, int width, int height)
 813 {
 814         struct saa711x_state *state = i2c_get_clientdata(client);
 815         int HPSC, HFSC;
 816         int VSCY;
 817         int res;
 818         int is_50hz = state->std & V4L2_STD_625_50;
 819         int Vsrc = is_50hz ? 576 : 480;
 820
 821         v4l_dbg(1, debug, client, "decoder set size to %ix%i\n",width,height);
 822
 823         /* FIXME need better bounds checking here */
 824         if ((width < 1) || (width > 1440))
 825                 return -EINVAL;
 826         if ((height < 1) || (height > Vsrc))
 827                 return -EINVAL;
 828
 829         if (!saa711x_has_reg(state->ident,R_D0_B_HORIZ_PRESCALING)) {
 830                 /* Decoder only supports 720 columns and 480 or 576 lines */
 831                 if (width != 720)
 832                         return -EINVAL;
 833                 if (height != Vsrc)
 834                         return -EINVAL;
 835         }
 836
 837         state->width = width;
 838         state->height = height;
 839
 840         if (!saa711x_has_reg(state->ident, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH))
 841                 return 0;
 842
 843         /* probably have a valid size, let's set it */
 844         /* Set output width/height */
 845         /* width */
 846
 847         saa711x_write(client, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,
 848                                         (u8) (width & 0xff));
 849         saa711x_write(client, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB,
 850                                         (u8) ((width >> 8) & 0xff));
 851
 852         /* Vertical Scaling uses height/2 */
 853         res=height/2;
 854
 855         /* On 60Hz, it is using a higher Vertical Output Size */
 856         if (!is_50hz)
 857                 res += (VRES_60HZ - 480) >> 1;
 858
 859                 /* height */
 860         saa711x_write(client, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,
 861                                         (u8) (res & 0xff));
 862         saa711x_write(client, R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB,
 863                                         (u8) ((res >> 8) & 0xff));
 864
 865         /* Scaling settings */
 866         /* Hprescaler is floor(inres/outres) */
 867         HPSC = (int)(720 / width);
 868         /* 0 is not allowed (div. by zero) */
 869         HPSC = HPSC ? HPSC : 1;
 870         HFSC = (int)((1024 * 720) / (HPSC * width));
 871         /* FIXME hardcodes to "Task B"
 872          * write H prescaler integer */
 873         saa711x_write(client, R_D0_B_HORIZ_PRESCALING,
 874                                 (u8) (HPSC & 0x3f));
 875
 876         v4l_dbg(1, debug, client, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC);
 877         /* write H fine-scaling (luminance) */
 878         saa711x_write(client, R_D8_B_HORIZ_LUMA_SCALING_INC,
 879                                 (u8) (HFSC & 0xff));
 880         saa711x_write(client, R_D9_B_HORIZ_LUMA_SCALING_INC_MSB,
 881                                 (u8) ((HFSC >> 8) & 0xff));
 882         /* write H fine-scaling (chrominance)
 883          * must be lum/2, so i'll just bitshift :) */
 884         saa711x_write(client, R_DC_B_HORIZ_CHROMA_SCALING,
 885                                 (u8) ((HFSC >> 1) & 0xff));
 886         saa711x_write(client, R_DD_B_HORIZ_CHROMA_SCALING_MSB,
 887                                 (u8) ((HFSC >> 9) & 0xff));
 888
 889         VSCY = (int)((1024 * Vsrc) / height);
 890         v4l_dbg(1, debug, client, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY);
 891
 892         /* Correct Contrast and Luminance */
 893         saa711x_write(client, R_D5_B_LUMA_CONTRAST_CNTL,
 894                                         (u8) (64 * 1024 / VSCY));
 895         saa711x_write(client, R_D6_B_CHROMA_SATURATION_CNTL,
 896                                         (u8) (64 * 1024 / VSCY));
 897
 898                 /* write V fine-scaling (luminance) */
 899         saa711x_write(client, R_E0_B_VERT_LUMA_SCALING_INC,
 900                                         (u8) (VSCY & 0xff));
 901         saa711x_write(client, R_E1_B_VERT_LUMA_SCALING_INC_MSB,
 902                                         (u8) ((VSCY >> 8) & 0xff));
 903                 /* write V fine-scaling (chrominance) */
 904         saa711x_write(client, R_E2_B_VERT_CHROMA_SCALING_INC,
 905                                         (u8) (VSCY & 0xff));
 906         saa711x_write(client, R_E3_B_VERT_CHROMA_SCALING_INC_MSB,
 907                                         (u8) ((VSCY >> 8) & 0xff));
 908
 909         saa711x_writeregs(client, saa7115_cfg_reset_scaler);
 910
 911         /* Activates task "B" */
 912         saa711x_write(client, R_80_GLOBAL_CNTL_1,
 913                                 saa711x_read(client,R_80_GLOBAL_CNTL_1) | 0x20);
 914
 915         return 0;
 916 }
 917
 918 static void saa711x_set_v4lstd(struct i2c_client *client, v4l2_std_id std)
 919 {
 920         struct saa711x_state *state = i2c_get_clientdata(client);
 921
 922         /* Prevent unnecessary standard changes. During a standard
 923            change the I-Port is temporarily disabled. Any devices
 924            reading from that port can get confused.
 925            Note that VIDIOC_S_STD is also used to switch from
 926            radio to TV mode, so if a VIDIOC_S_STD is broadcast to
 927            all I2C devices then you do not want to have an unwanted
 928            side-effect here. */
 929         if (std == state->std)
 930                 return;
 931
 932         state->std = std;
 933
 934         // This works for NTSC-M, SECAM-L and the 50Hz PAL variants.
 935         if (std & V4L2_STD_525_60) {
 936                 v4l_dbg(1, debug, client, "decoder set standard 60 Hz\n");
 937                 saa711x_writeregs(client, saa7115_cfg_60hz_video);
 938                 saa711x_set_size(client, 720, 480);
 939         } else {
 940                 v4l_dbg(1, debug, client, "decoder set standard 50 Hz\n");
 941                 saa711x_writeregs(client, saa7115_cfg_50hz_video);
 942                 saa711x_set_size(client, 720, 576);
 943         }
 944
 945         /* Register 0E - Bits D6-D4 on NO-AUTO mode
 946                 (SAA7111 and SAA7113 doesn't have auto mode)
 947             50 Hz / 625 lines           60 Hz / 525 lines
 948         000 PAL BGDHI (4.43Mhz)         NTSC M (3.58MHz)
 949         001 NTSC 4.43 (50 Hz)           PAL 4.43 (60 Hz)
 950         010 Combination-PAL N (3.58MHz) NTSC 4.43 (60 Hz)
 951         011 NTSC N (3.58MHz)            PAL M (3.58MHz)
 952         100 reserved                    NTSC-Japan (3.58MHz)
 953         */
 954         if (state->ident == V4L2_IDENT_SAA7111 ||
 955             state->ident == V4L2_IDENT_SAA7113) {
 956                 u8 reg = saa711x_read(client, R_0E_CHROMA_CNTL_1) & 0x8f;
 957
 958                 if (std == V4L2_STD_PAL_M) {
 959                         reg |= 0x30;
 960                 } else if (std == V4L2_STD_PAL_N) {
 961                         reg |= 0x20;
 962                 } else if (std == V4L2_STD_PAL_60) {
 963                         reg |= 0x10;
 964                 } else if (std == V4L2_STD_NTSC_M_JP) {
 965                         reg |= 0x40;
 966                 } else if (std & V4L2_STD_SECAM) {
 967                         reg |= 0x50;
 968                 }
 969                 saa711x_write(client, R_0E_CHROMA_CNTL_1, reg);
 970         } else {
 971                 /* restart task B if needed */
 972                 int taskb = saa711x_read(client, R_80_GLOBAL_CNTL_1) & 0x10;
 973
 974                 if (taskb && state->ident == V4L2_IDENT_SAA7114) {
 975                         saa711x_writeregs(client, saa7115_cfg_vbi_on);
 976                 }
 977
 978                 /* switch audio mode too! */
 979                 saa711x_set_audio_clock_freq(client, state->audclk_freq);
 980         }
 981 }
 982
 983 static v4l2_std_id saa711x_get_v4lstd(struct i2c_client *client)
 984 {
 985         struct saa711x_state *state = i2c_get_clientdata(client);
 986
 987         return state->std;
 988 }
 989
 990 static void saa711x_log_status(struct i2c_client *client)
 991 {
 992         struct saa711x_state *state = i2c_get_clientdata(client);
 993         int reg1e, reg1f;
 994         int signalOk;
 995         int vcr;
 996
 997         v4l_info(client, "Audio frequency: %d Hz\n", state->audclk_freq);
 998         if (state->ident != V4L2_IDENT_SAA7115) {
 999                 /* status for the saa7114 */
1000                 reg1f = saa711x_read(client, R_1F_STATUS_BYTE_2_VD_DEC);
1001                 signalOk = (reg1f & 0xc1) == 0x81;
1002                 v4l_info(client, "Video signal:    %s\n", signalOk ? "ok" : "bad");
1003                 v4l_info(client, "Frequency:       %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz");
1004                 return;
1005         }
1006
1007         /* status for the saa7115 */
1008         reg1e = saa711x_read(client, R_1E_STATUS_BYTE_1_VD_DEC);
1009         reg1f = saa711x_read(client, R_1F_STATUS_BYTE_2_VD_DEC);
1010
1011         signalOk = (reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80;
1012         vcr = !(reg1f & 0x10);
1013
1014         if (state->input >= 6) {
1015                 v4l_info(client, "Input:           S-Video %d\n", state->input - 6);
1016         } else {
1017                 v4l_info(client, "Input:           Composite %d\n", state->input);
1018         }
1019         v4l_info(client, "Video signal:    %s\n", signalOk ? (vcr ? "VCR" : "broadcast/DVD") : "bad");
1020         v4l_info(client, "Frequency:       %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz");
1021
1022         switch (reg1e & 0x03) {
1023                 case 1:
1024                         v4l_info(client, "Detected format: NTSC\n");
1025                         break;
1026                 case 2:
1027                         v4l_info(client, "Detected format: PAL\n");
1028                         break;
1029                 case 3:
1030                         v4l_info(client, "Detected format: SECAM\n");
1031                         break;
1032                 default:
1033                         v4l_info(client, "Detected format: BW/No color\n");
1034                         break;
1035         }
1036         v4l_info(client, "Width, Height:   %d, %d\n", state->width, state->height);
1037 }
1038
1039 /* setup the sliced VBI lcr registers according to the sliced VBI format */
1040 static void saa711x_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_format *fmt)
1041 {
1042         struct saa711x_state *state = i2c_get_clientdata(client);
1043         int is_50hz = (state->std & V4L2_STD_625_50);
1044         u8 lcr[24];
1045         int i, x;
1046
1047 #if 1
1048         /* saa7113/7114/7118 VBI support are experimental */
1049         if (!saa711x_has_reg(state->ident,R_41_LCR_BASE))
1050                 return;
1051
1052 #else
1053         /* SAA7113 and SAA7118 also should support VBI - Need testing */
1054         if (state->ident != V4L2_IDENT_SAA7115)
1055                 return;
1056 #endif
1057
1058         for (i = 0; i <= 23; i++)
1059                 lcr[i] = 0xff;
1060
1061         if (fmt->service_set == 0) {
1062                 /* raw VBI */
1063                 if (is_50hz)
1064                         for (i = 6; i <= 23; i++)
1065                                 lcr[i] = 0xdd;
1066                 else
1067                         for (i = 10; i <= 21; i++)
1068                                 lcr[i] = 0xdd;
1069         } else {
1070                 /* sliced VBI */
1071                 /* first clear lines that cannot be captured */
1072                 if (is_50hz) {
1073                         for (i = 0; i <= 5; i++)
1074                                 fmt->service_lines[0][i] =
1075                                         fmt->service_lines[1][i] = 0;
1076                 }
1077                 else {
1078                         for (i = 0; i <= 9; i++)
1079                                 fmt->service_lines[0][i] =
1080                                         fmt->service_lines[1][i] = 0;
1081                         for (i = 22; i <= 23; i++)
1082                                 fmt->service_lines[0][i] =
1083                                         fmt->service_lines[1][i] = 0;
1084                 }
1085
1086                 /* Now set the lcr values according to the specified service */
1087                 for (i = 6; i <= 23; i++) {
1088                         lcr[i] = 0;
1089                         for (x = 0; x <= 1; x++) {
1090                                 switch (fmt->service_lines[1-x][i]) {
1091                                         case 0:
1092                                                 lcr[i] |= 0xf << (4 * x);
1093                                                 break;
1094                                         case V4L2_SLICED_TELETEXT_B:
1095                                                 lcr[i] |= 1 << (4 * x);
1096                                                 break;
1097                                         case V4L2_SLICED_CAPTION_525:
1098                                                 lcr[i] |= 4 << (4 * x);
1099                                                 break;
1100                                         case V4L2_SLICED_WSS_625:
1101                                                 lcr[i] |= 5 << (4 * x);
1102                                                 break;
1103                                         case V4L2_SLICED_VPS:
1104                                                 lcr[i] |= 7 << (4 * x);
1105                                                 break;
1106                                 }
1107                         }
1108                 }
1109         }
1110
1111         /* write the lcr registers */
1112         for (i = 2; i <= 23; i++) {
1113                 saa711x_write(client, i - 2 + R_41_LCR_BASE, lcr[i]);
1114         }
1115
1116         /* enable/disable raw VBI capturing */
1117         saa711x_writeregs(client, fmt->service_set == 0 ?
1118                                 saa7115_cfg_vbi_on :
1119                                 saa7115_cfg_vbi_off);
1120 }
1121
1122 static int saa711x_get_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt)
1123 {
1124         static u16 lcr2vbi[] = {
1125                 0, V4L2_SLICED_TELETEXT_B, 0,   /* 1 */
1126                 0, V4L2_SLICED_CAPTION_525,     /* 4 */
1127                 V4L2_SLICED_WSS_625, 0,         /* 5 */
1128                 V4L2_SLICED_VPS, 0, 0, 0, 0,    /* 7 */
1129                 0, 0, 0, 0
1130         };
1131         struct v4l2_sliced_vbi_format *sliced = &fmt->fmt.sliced;
1132         int i;
1133
1134         if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
1135                 return -EINVAL;
1136         memset(sliced, 0, sizeof(*sliced));
1137         /* done if using raw VBI */
1138         if (saa711x_read(client, R_80_GLOBAL_CNTL_1) & 0x10)
1139                 return 0;
1140         for (i = 2; i <= 23; i++) {
1141                 u8 v = saa711x_read(client, i - 2 + R_41_LCR_BASE);
1142
1143                 sliced->service_lines[0][i] = lcr2vbi[v >> 4];
1144                 sliced->service_lines[1][i] = lcr2vbi[v & 0xf];
1145                 sliced->service_set |=
1146                         sliced->service_lines[0][i] | sliced->service_lines[1][i];
1147         }
1148         return 0;
1149 }
1150
1151 static int saa711x_set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt)
1152 {
1153         if (fmt->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) {
1154                 saa711x_set_lcr(client, &fmt->fmt.sliced);
1155                 return 0;
1156         }
1157         if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
1158                 return -EINVAL;
1159
1160         return saa711x_set_size(client,fmt->fmt.pix.width,fmt->fmt.pix.height);
1161 }
1162
1163 /* Decode the sliced VBI data stream as created by the saa7115.
1164    The format is described in the saa7115 datasheet in Tables 25 and 26
1165    and in Figure 33.
1166    The current implementation uses SAV/EAV codes and not the ancillary data
1167    headers. The vbi->p pointer points to the R_5E_SDID byte right after the SAV
1168    code. */
1169 static void saa711x_decode_vbi_line(struct i2c_client *client,
1170                                     struct v4l2_decode_vbi_line *vbi)
1171 {
1172         static const char vbi_no_data_pattern[] = {
1173                 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0
1174         };
1175         struct saa711x_state *state = i2c_get_clientdata(client);
1176         u8 *p = vbi->p;
1177         u32 wss;
1178         int id1, id2;   /* the ID1 and ID2 bytes from the internal header */
1179
1180         vbi->type = 0;  /* mark result as a failure */
1181         id1 = p[2];
1182         id2 = p[3];
1183         /* Note: the field bit is inverted for 60 Hz video */
1184         if (state->std & V4L2_STD_525_60)
1185                 id1 ^= 0x40;
1186
1187         /* Skip internal header, p now points to the start of the payload */
1188         p += 4;
1189         vbi->p = p;
1190
1191         /* calculate field and line number of the VBI packet (1-23) */
1192         vbi->is_second_field = ((id1 & 0x40) != 0);
1193         vbi->line = (id1 & 0x3f) << 3;
1194         vbi->line |= (id2 & 0x70) >> 4;
1195
1196         /* Obtain data type */
1197         id2 &= 0xf;
1198
1199         /* If the VBI slicer does not detect any signal it will fill up
1200            the payload buffer with 0xa0 bytes. */
1201         if (!memcmp(p, vbi_no_data_pattern, sizeof(vbi_no_data_pattern)))
1202                 return;
1203
1204         /* decode payloads */
1205         switch (id2) {
1206         case 1:
1207                 vbi->type = V4L2_SLICED_TELETEXT_B;
1208                 break;
1209         case 4:
1210                 if (!saa711x_odd_parity(p[0]) || !saa711x_odd_parity(p[1]))
1211                         return;
1212                 vbi->type = V4L2_SLICED_CAPTION_525;
1213                 break;
1214         case 5:
1215                 wss = saa711x_decode_wss(p);
1216                 if (wss == -1)
1217                         return;
1218                 p[0] = wss & 0xff;
1219                 p[1] = wss >> 8;
1220                 vbi->type = V4L2_SLICED_WSS_625;
1221                 break;
1222         case 7:
1223                 if (saa711x_decode_vps(p, p) != 0)
1224                         return;
1225                 vbi->type = V4L2_SLICED_VPS;
1226                 break;
1227         default:
1228                 return;
1229         }
1230 }
1231
1232 /* ============ SAA7115 AUDIO settings (end) ============= */
1233
1234 static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *arg)
1235 {
1236         struct saa711x_state *state = i2c_get_clientdata(client);
1237
1238         /* ioctls to allow direct access to the saa7115 registers for testing */
1239         switch (cmd) {
1240         case VIDIOC_S_FMT:
1241                 return saa711x_set_v4lfmt(client, (struct v4l2_format *)arg);
1242
1243         case VIDIOC_G_FMT:
1244                 return saa711x_get_v4lfmt(client, (struct v4l2_format *)arg);
1245
1246         case VIDIOC_INT_AUDIO_CLOCK_FREQ:
1247                 return saa711x_set_audio_clock_freq(client, *(u32 *)arg);
1248
1249         case VIDIOC_G_TUNER:
1250         {
1251                 struct v4l2_tuner *vt = arg;
1252                 int status;
1253
1254                 if (state->radio)
1255                         break;
1256                 status = saa711x_read(client, R_1F_STATUS_BYTE_2_VD_DEC);
1257
1258                 v4l_dbg(1, debug, client, "status: 0x%02x\n", status);
1259                 vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0;
1260                 break;
1261         }
1262
1263         case VIDIOC_LOG_STATUS:
1264                 saa711x_log_status(client);
1265                 break;
1266
1267         case VIDIOC_G_CTRL:
1268                 return saa711x_get_v4lctrl(client, (struct v4l2_control *)arg);
1269
1270         case VIDIOC_S_CTRL:
1271                 return saa711x_set_v4lctrl(client, (struct v4l2_control *)arg);
1272
1273         case VIDIOC_QUERYCTRL:
1274         {
1275                 struct v4l2_queryctrl *qc = arg;
1276
1277                 switch (qc->id) {
1278                         case V4L2_CID_BRIGHTNESS:
1279                         case V4L2_CID_CONTRAST:
1280                         case V4L2_CID_SATURATION:
1281                         case V4L2_CID_HUE:
1282                                 return v4l2_ctrl_query_fill_std(qc);
1283                         default:
1284                                 return -EINVAL;
1285                 }
1286         }
1287
1288         case VIDIOC_G_STD:
1289                 *(v4l2_std_id *)arg = saa711x_get_v4lstd(client);
1290                 break;
1291
1292         case VIDIOC_S_STD:
1293                 state->radio = 0;
1294                 saa711x_set_v4lstd(client, *(v4l2_std_id *)arg);
1295                 break;
1296
1297         case AUDC_SET_RADIO:
1298                 state->radio = 1;
1299                 break;
1300
1301         case VIDIOC_INT_G_VIDEO_ROUTING:
1302         {
1303                 struct v4l2_routing *route = arg;
1304
1305                 route->input = state->input;
1306                 route->output = state->output;
1307                 break;
1308         }
1309
1310         case VIDIOC_INT_S_VIDEO_ROUTING:
1311         {
1312                 struct v4l2_routing *route = arg;
1313
1314                 v4l_dbg(1, debug, client, "decoder set input %d output %d\n", route->input, route->output);
1315                 /* saa7113 does not have these inputs */
1316                 if (state->ident == V4L2_IDENT_SAA7113 &&
1317                     (route->input == SAA7115_COMPOSITE4 ||
1318                      route->input == SAA7115_COMPOSITE5)) {
1319                         return -EINVAL;
1320                 }
1321                 if (route->input > SAA7115_SVIDEO3)
1322                         return -EINVAL;
1323                 if (route->output > SAA7115_IPORT_ON)
1324                         return -EINVAL;
1325                 if (state->input == route->input && state->output == route->output)
1326                         break;
1327                 v4l_dbg(1, debug, client, "now setting %s input %s output\n",
1328                         (route->input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite", (route->output == SAA7115_IPORT_ON) ? "iport on" : "iport off");
1329                 state->input = route->input;
1330
1331                 /* select mode */
1332                 saa711x_write(client, R_02_INPUT_CNTL_1,
1333                               (saa711x_read(client, R_02_INPUT_CNTL_1) & 0xf0) |
1334                                state->input);
1335
1336                 /* bypass chrominance trap for S-Video modes */
1337                 saa711x_write(client, R_09_LUMA_CNTL,
1338                               (saa711x_read(client, R_09_LUMA_CNTL) & 0x7f) |
1339                                (state->input >= SAA7115_SVIDEO0 ? 0x80 : 0x0));
1340
1341                 state->output = route->output;
1342                 if (state->ident == V4L2_IDENT_SAA7114 ||
1343                         state->ident == V4L2_IDENT_SAA7115) {
1344                         saa711x_write(client, R_83_X_PORT_I_O_ENA_AND_OUT_CLK,
1345                               (saa711x_read(client, R_83_X_PORT_I_O_ENA_AND_OUT_CLK) & 0xfe) |
1346                                (state->output & 0x01));
1347                 }
1348                 break;
1349         }
1350
1351         case VIDIOC_STREAMON:
1352         case VIDIOC_STREAMOFF:
1353                 v4l_dbg(1, debug, client, "%s output\n",
1354                         (cmd == VIDIOC_STREAMON) ? "enable" : "disable");
1355
1356                 if (state->enable != (cmd == VIDIOC_STREAMON)) {
1357                         state->enable = (cmd == VIDIOC_STREAMON);
1358                         saa711x_write(client,
1359                                 R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED,
1360                                 state->enable);
1361                 }
1362                 break;
1363
1364         case VIDIOC_INT_S_CRYSTAL_FREQ:
1365         {
1366                 struct v4l2_crystal_freq *freq = arg;
1367
1368                 if (freq->freq != SAA7115_FREQ_32_11_MHZ &&
1369                     freq->freq != SAA7115_FREQ_24_576_MHZ)
1370                         return -EINVAL;
1371                 state->crystal_freq = freq->freq;
1372                 state->cgcdiv = (freq->flags & SAA7115_FREQ_FL_CGCDIV) ? 3 : 4;
1373                 state->ucgc = (freq->flags & SAA7115_FREQ_FL_UCGC) ? 1 : 0;
1374                 state->apll = (freq->flags & SAA7115_FREQ_FL_APLL) ? 1 : 0;
1375                 saa711x_set_audio_clock_freq(client, state->audclk_freq);
1376                 break;
1377         }
1378
1379         case VIDIOC_INT_DECODE_VBI_LINE:
1380                 saa711x_decode_vbi_line(client, arg);
1381                 break;
1382
1383         case VIDIOC_INT_RESET:
1384                 v4l_dbg(1, debug, client, "decoder RESET\n");
1385                 saa711x_writeregs(client, saa7115_cfg_reset_scaler);
1386                 break;
1387
1388         case VIDIOC_INT_G_VBI_DATA:
1389         {
1390                 struct v4l2_sliced_vbi_data *data = arg;
1391
1392                 /* Note: the internal field ID is inverted for NTSC,
1393                    so data->field 0 maps to the saa7115 even field,
1394                    whereas for PAL it maps to the saa7115 odd field. */
1395                 switch (data->id) {
1396                 case V4L2_SLICED_WSS_625:
1397                         if (saa711x_read(client, 0x6b) & 0xc0)
1398                                 return -EIO;
1399                         data->data[0] = saa711x_read(client, 0x6c);
1400                         data->data[1] = saa711x_read(client, 0x6d);
1401                         return 0;
1402                 case V4L2_SLICED_CAPTION_525:
1403                         if (data->field == 0) {
1404                                 /* CC */
1405                                 if (saa711x_read(client, 0x66) & 0x30)
1406                                         return -EIO;
1407                                 data->data[0] = saa711x_read(client, 0x69);
1408                                 data->data[1] = saa711x_read(client, 0x6a);
1409                                 return 0;
1410                         }
1411                         /* XDS */
1412                         if (saa711x_read(client, 0x66) & 0xc0)
1413                                 return -EIO;
1414                         data->data[0] = saa711x_read(client, 0x67);
1415                         data->data[1] = saa711x_read(client, 0x68);
1416                         return 0;
1417                 default:
1418                         return -EINVAL;
1419                 }
1420                 break;
1421         }
1422
1423 #ifdef CONFIG_VIDEO_ADV_DEBUG
1424         case VIDIOC_DBG_G_REGISTER:
1425         case VIDIOC_DBG_S_REGISTER:
1426         {
1427                 struct v4l2_register *reg = arg;
1428
1429                 if (!v4l2_chip_match_i2c_client(client, reg->match_type, reg->match_chip))
1430                         return -EINVAL;
1431                 if (!capable(CAP_SYS_ADMIN))
1432                         return -EPERM;
1433                 if (cmd == VIDIOC_DBG_G_REGISTER)
1434                         reg->val = saa711x_read(client, reg->reg & 0xff);
1435                 else
1436                         saa711x_write(client, reg->reg & 0xff, reg->val & 0xff);
1437                 break;
1438         }
1439 #endif
1440
1441         case VIDIOC_G_CHIP_IDENT:
1442                 return v4l2_chip_ident_i2c_client(client, arg, state->ident, 0);
1443
1444         default:
1445                 return -EINVAL;
1446         }
1447
1448         return 0;
1449 }
1450
1451 /* ----------------------------------------------------------------------- */
1452
1453 static int saa7115_probe(struct i2c_client *client)
1454 {
1455         struct saa711x_state *state;
1456         int     i;
1457         char    name[17];
1458         u8 chip_id;
1459
1460         /* Check if the adapter supports the needed features */
1461         if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1462                 return -EIO;
1463
1464         snprintf(client->name, sizeof(client->name) - 1, "saa7115");
1465
1466         for (i = 0; i < 0x0f; i++) {
1467                 saa711x_write(client, 0, i);
1468                 name[i] = (saa711x_read(client, 0) & 0x0f) + '0';
1469                 if (name[i] > '9')
1470                         name[i] += 'a' - '9' - 1;
1471         }
1472         name[i] = '\0';
1473
1474         saa711x_write(client, 0, 5);
1475         chip_id = saa711x_read(client, 0) & 0x0f;
1476
1477         /* Check whether this chip is part of the saa711x series */
1478         if (memcmp(name, "1f711", 5)) {
1479                 v4l_dbg(1, debug, client, "chip found @ 0x%x (ID %s) does not match a known saa711x chip.\n",
1480                         client->addr << 1, name);
1481                 return -ENODEV;
1482         }
1483
1484         snprintf(client->name, sizeof(client->name) - 1, "saa711%d",chip_id);
1485         v4l_info(client, "saa711%d found (%s) @ 0x%x (%s)\n", chip_id, name, client->addr << 1, client->adapter->name);
1486
1487         state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL);
1488         i2c_set_clientdata(client, state);
1489         if (state == NULL) {
1490                 return -ENOMEM;
1491         }
1492         state->input = -1;
1493         state->output = SAA7115_IPORT_ON;
1494         state->enable = 1;
1495         state->radio = 0;
1496         state->bright = 128;
1497         state->contrast = 64;
1498         state->hue = 0;
1499         state->sat = 64;
1500         switch (chip_id) {
1501         case 1:
1502                 state->ident = V4L2_IDENT_SAA7111;
1503                 break;
1504         case 3:
1505                 state->ident = V4L2_IDENT_SAA7113;
1506                 break;
1507         case 4:
1508                 state->ident = V4L2_IDENT_SAA7114;
1509                 break;
1510         case 5:
1511                 state->ident = V4L2_IDENT_SAA7115;
1512                 break;
1513         case 8:
1514                 state->ident = V4L2_IDENT_SAA7118;
1515                 break;
1516         default:
1517                 state->ident = V4L2_IDENT_SAA7111;
1518                 v4l_info(client, "WARNING: Chip is not known - Falling back to saa7111\n");
1519
1520         }
1521
1522         state->audclk_freq = 48000;
1523
1524         v4l_dbg(1, debug, client, "writing init values\n");
1525
1526         /* init to 60hz/48khz */
1527         state->crystal_freq = SAA7115_FREQ_24_576_MHZ;
1528         switch (state->ident) {
1529         case V4L2_IDENT_SAA7111:
1530                 saa711x_writeregs(client, saa7111_init);
1531                 break;
1532         case V4L2_IDENT_SAA7113:
1533                 saa711x_writeregs(client, saa7113_init);
1534                 break;
1535         default:
1536                 state->crystal_freq = SAA7115_FREQ_32_11_MHZ;
1537                 saa711x_writeregs(client, saa7115_init_auto_input);
1538         }
1539         saa711x_writeregs(client, saa7115_init_misc);
1540         saa711x_set_v4lstd(client, V4L2_STD_NTSC);
1541
1542         v4l_dbg(1, debug, client, "status: (1E) 0x%02x, (1F) 0x%02x\n",
1543                 saa711x_read(client, R_1E_STATUS_BYTE_1_VD_DEC), saa711x_read(client, R_1F_STATUS_BYTE_2_VD_DEC));
1544         return 0;
1545 }
1546
1547 /* ----------------------------------------------------------------------- */
1548
1549 static int saa7115_remove(struct i2c_client *client)
1550 {
1551         kfree(i2c_get_clientdata(client));
1552         return 0;
1553 }
1554
1555 static struct v4l2_i2c_driver_data v4l2_i2c_data = {
1556         .name = "saa7115",
1557         .driverid = I2C_DRIVERID_SAA711X,
1558         .command = saa7115_command,
1559         .probe = saa7115_probe,
1560         .remove = saa7115_remove,
1561         .legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL,
1562 };
1563