git.oblomov.eu Git - linux-2.6/blob - arch/arm/mach-omap1/board-palmte.c

   1 /*
   2  * linux/arch/arm/mach-omap1/board-palmte.c
   3  *
   4  * Modified from board-generic.c
   5  *
   6  * Support for the Palm Tungsten E PDA.
   7  *
   8  * Original version : Laurent Gonzalez
   9  *
  10  * Maintainers : http://palmtelinux.sf.net
  11  *                palmtelinux-developpers@lists.sf.net
  12  *
  13  * Copyright (c) 2006 Andrzej Zaborowski  <balrog@zabor.org>
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License version 2 as
  17  * published by the Free Software Foundation.
  18  */
  19
  20 #include <linux/kernel.h>
  21 #include <linux/init.h>
  22 #include <linux/input.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/mtd/mtd.h>
  25 #include <linux/mtd/partitions.h>
  26 #include <linux/spi/spi.h>
  27 #include <linux/interrupt.h>
  28 #include <linux/apm-emulation.h>
  29
  30 #include <mach/hardware.h>
  31 #include <asm/mach-types.h>
  32 #include <asm/mach/arch.h>
  33 #include <asm/mach/map.h>
  34 #include <asm/mach/flash.h>
  35
  36 #include <mach/gpio.h>
  37 #include <mach/mux.h>
  38 #include <mach/usb.h>
  39 #include <mach/tc.h>
  40 #include <mach/dma.h>
  41 #include <mach/board.h>
  42 #include <mach/irda.h>
  43 #include <mach/keypad.h>
  44 #include <mach/common.h>
  45 #include <mach/mcbsp.h>
  46 #include <mach/omap-alsa.h>
  47
  48 static void __init omap_palmte_init_irq(void)
  49 {
  50         omap1_init_common_hw();
  51         omap_init_irq();
  52         omap_gpio_init();
  53 }
  54
  55 static const int palmte_keymap[] = {
  56         KEY(0, 0, KEY_F1),              /* Calendar */
  57         KEY(0, 1, KEY_F2),              /* Contacts */
  58         KEY(0, 2, KEY_F3),              /* Tasks List */
  59         KEY(0, 3, KEY_F4),              /* Note Pad */
  60         KEY(0, 4, KEY_POWER),
  61         KEY(1, 0, KEY_LEFT),
  62         KEY(1, 1, KEY_DOWN),
  63         KEY(1, 2, KEY_UP),
  64         KEY(1, 3, KEY_RIGHT),
  65         KEY(1, 4, KEY_ENTER),
  66         0,
  67 };
  68
  69 static struct omap_kp_platform_data palmte_kp_data = {
  70         .rows   = 8,
  71         .cols   = 8,
  72         .keymap = (int *) palmte_keymap,
  73         .rep    = 1,
  74         .delay  = 12,
  75 };
  76
  77 static struct resource palmte_kp_resources[] = {
  78         [0]     = {
  79                 .start  = INT_KEYBOARD,
  80                 .end    = INT_KEYBOARD,
  81                 .flags  = IORESOURCE_IRQ,
  82         },
  83 };
  84
  85 static struct platform_device palmte_kp_device = {
  86         .name           = "omap-keypad",
  87         .id             = -1,
  88         .dev            = {
  89                 .platform_data  = &palmte_kp_data,
  90         },
  91         .num_resources  = ARRAY_SIZE(palmte_kp_resources),
  92         .resource       = palmte_kp_resources,
  93 };
  94
  95 static struct mtd_partition palmte_rom_partitions[] = {
  96         /* PalmOS "Small ROM", contains the bootloader and the debugger */
  97         {
  98                 .name           = "smallrom",
  99                 .offset         = 0,
 100                 .size           = 0xa000,
 101                 .mask_flags     = MTD_WRITEABLE,
 102         },
 103         /* PalmOS "Big ROM", a filesystem with all the OS code and data */
 104         {
 105                 .name           = "bigrom",
 106                 .offset         = SZ_128K,
 107                 /*
 108                  * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
 109                  * 0x7b0000 bytes in the English-only ("enUS") version.
 110                  */
 111                 .size           = 0x7b0000,
 112                 .mask_flags     = MTD_WRITEABLE,
 113         },
 114 };
 115
 116 static struct flash_platform_data palmte_rom_data = {
 117         .map_name       = "map_rom",
 118         .width          = 2,
 119         .parts          = palmte_rom_partitions,
 120         .nr_parts       = ARRAY_SIZE(palmte_rom_partitions),
 121 };
 122
 123 static struct resource palmte_rom_resource = {
 124         .start          = OMAP_CS0_PHYS,
 125         .end            = OMAP_CS0_PHYS + SZ_8M - 1,
 126         .flags          = IORESOURCE_MEM,
 127 };
 128
 129 static struct platform_device palmte_rom_device = {
 130         .name           = "omapflash",
 131         .id             = -1,
 132         .dev            = {
 133                 .platform_data  = &palmte_rom_data,
 134         },
 135         .num_resources  = 1,
 136         .resource       = &palmte_rom_resource,
 137 };
 138
 139 static struct platform_device palmte_lcd_device = {
 140         .name           = "lcd_palmte",
 141         .id             = -1,
 142 };
 143
 144 static struct omap_backlight_config palmte_backlight_config = {
 145         .default_intensity      = 0xa0,
 146 };
 147
 148 static struct platform_device palmte_backlight_device = {
 149         .name           = "omap-bl",
 150         .id             = -1,
 151         .dev            = {
 152                 .platform_data  = &palmte_backlight_config,
 153         },
 154 };
 155
 156 static struct omap_irda_config palmte_irda_config = {
 157         .transceiver_cap        = IR_SIRMODE,
 158         .rx_channel             = OMAP_DMA_UART3_RX,
 159         .tx_channel             = OMAP_DMA_UART3_TX,
 160         .dest_start             = UART3_THR,
 161         .src_start              = UART3_RHR,
 162         .tx_trigger             = 0,
 163         .rx_trigger             = 0,
 164 };
 165
 166 static struct resource palmte_irda_resources[] = {
 167         [0]     = {
 168                 .start  = INT_UART3,
 169                 .end    = INT_UART3,
 170                 .flags  = IORESOURCE_IRQ,
 171         },
 172 };
 173
 174 static struct platform_device palmte_irda_device = {
 175         .name           = "omapirda",
 176         .id             = -1,
 177         .dev            = {
 178                 .platform_data  = &palmte_irda_config,
 179         },
 180         .num_resources  = ARRAY_SIZE(palmte_irda_resources),
 181         .resource       = palmte_irda_resources,
 182 };
 183
 184 static struct platform_device *palmte_devices[] __initdata = {
 185         &palmte_rom_device,
 186         &palmte_kp_device,
 187         &palmte_lcd_device,
 188         &palmte_backlight_device,
 189         &palmte_irda_device,
 190 };
 191
 192 static struct omap_usb_config palmte_usb_config __initdata = {
 193         .register_dev   = 1,    /* Mini-B only receptacle */
 194         .hmc_mode       = 0,
 195         .pins[0]        = 2,
 196 };
 197
 198 static struct omap_mmc_config palmte_mmc_config __initdata = {
 199         .mmc[0]         = {
 200                 .enabled        = 1,
 201                 .wp_pin         = PALMTE_MMC_WP_GPIO,
 202                 .power_pin      = PALMTE_MMC_POWER_GPIO,
 203                 .switch_pin     = PALMTE_MMC_SWITCH_GPIO,
 204         },
 205 };
 206
 207 static struct omap_lcd_config palmte_lcd_config __initdata = {
 208         .ctrl_name      = "internal",
 209 };
 210
 211 static struct omap_uart_config palmte_uart_config __initdata = {
 212         .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
 213 };
 214
 215 static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {
 216         .spcr2  = FRST | GRST | XRST | XINTM(3),
 217         .xcr2   = XDATDLY(1) | XFIG,
 218         .xcr1   = XWDLEN1(OMAP_MCBSP_WORD_32),
 219         .pcr0   = SCLKME | FSXP | CLKXP,
 220 };
 221
 222 static struct omap_alsa_codec_config palmte_alsa_config = {
 223         .name                   = "TSC2102 audio",
 224         .mcbsp_regs_alsa        = &palmte_mcbsp1_regs,
 225         .codec_configure_dev    = NULL, /* tsc2102_configure, */
 226         .codec_set_samplerate   = NULL, /* tsc2102_set_samplerate, */
 227         .codec_clock_setup      = NULL, /* tsc2102_clock_setup, */
 228         .codec_clock_on         = NULL, /* tsc2102_clock_on, */
 229         .codec_clock_off        = NULL, /* tsc2102_clock_off, */
 230         .get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */
 231 };
 232
 233 #ifdef CONFIG_APM
 234 /*
 235  * Values measured in 10 minute intervals averaged over 10 samples.
 236  * May differ slightly from device to device but should be accurate
 237  * enough to give basic idea of battery life left and trigger
 238  * potential alerts.
 239  */
 240 static const int palmte_battery_sample[] = {
 241         2194, 2157, 2138, 2120,
 242         2104, 2089, 2075, 2061,
 243         2048, 2038, 2026, 2016,
 244         2008, 1998, 1989, 1980,
 245         1970, 1958, 1945, 1928,
 246         1910, 1888, 1860, 1827,
 247         1791, 1751, 1709, 1656,
 248 };
 249
 250 #define INTERVAL                10
 251 #define BATTERY_HIGH_TRESHOLD   66
 252 #define BATTERY_LOW_TRESHOLD    33
 253
 254 static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 255 {
 256         int charging, batt, hi, lo, mid;
 257
 258         charging = !omap_get_gpio_datain(PALMTE_DC_GPIO);
 259         batt = battery[0];
 260         if (charging)
 261                 batt -= 60;
 262
 263         hi = ARRAY_SIZE(palmte_battery_sample);
 264         lo = 0;
 265
 266         info->battery_flag = 0;
 267         info->units = APM_UNITS_MINS;
 268
 269         if (batt > palmte_battery_sample[lo]) {
 270                 info->battery_life = 100;
 271                 info->time = INTERVAL * ARRAY_SIZE(palmte_battery_sample);
 272         } else if (batt <= palmte_battery_sample[hi - 1]) {
 273                 info->battery_life = 0;
 274                 info->time = 0;
 275         } else {
 276                 while (hi > lo + 1) {
 277                         mid = (hi + lo) >> 1;
 278                         if (batt <= palmte_battery_sample[mid])
 279                                 lo = mid;
 280                         else
 281                                 hi = mid;
 282                 }
 283
 284                 mid = palmte_battery_sample[lo] - palmte_battery_sample[hi];
 285                 hi = palmte_battery_sample[lo] - batt;
 286                 info->battery_life = 100 - (100 * lo + 100 * hi / mid) /
 287                         ARRAY_SIZE(palmte_battery_sample);
 288                 info->time = INTERVAL * (ARRAY_SIZE(palmte_battery_sample) -
 289                                 lo) - INTERVAL * hi / mid;
 290         }
 291
 292         if (charging) {
 293                 info->ac_line_status = APM_AC_ONLINE;
 294                 info->battery_status = APM_BATTERY_STATUS_CHARGING;
 295                 info->battery_flag |= APM_BATTERY_FLAG_CHARGING;
 296         } else {
 297                 info->ac_line_status = APM_AC_OFFLINE;
 298                 if (info->battery_life > BATTERY_HIGH_TRESHOLD)
 299                         info->battery_status = APM_BATTERY_STATUS_HIGH;
 300                 else if (info->battery_life > BATTERY_LOW_TRESHOLD)
 301                         info->battery_status = APM_BATTERY_STATUS_LOW;
 302                 else
 303                         info->battery_status = APM_BATTERY_STATUS_CRITICAL;
 304         }
 305
 306         if (info->battery_life > BATTERY_HIGH_TRESHOLD)
 307                 info->battery_flag |= APM_BATTERY_FLAG_HIGH;
 308         else if (info->battery_life > BATTERY_LOW_TRESHOLD)
 309                 info->battery_flag |= APM_BATTERY_FLAG_LOW;
 310         else
 311                 info->battery_flag |= APM_BATTERY_FLAG_CRITICAL;
 312 }
 313 #else
 314 #define palmte_get_power_status NULL
 315 #endif
 316
 317 static struct omap_board_config_kernel palmte_config[] __initdata = {
 318         { OMAP_TAG_USB,         &palmte_usb_config },
 319         { OMAP_TAG_MMC,         &palmte_mmc_config },
 320         { OMAP_TAG_LCD,         &palmte_lcd_config },
 321         { OMAP_TAG_UART,        &palmte_uart_config },
 322 };
 323
 324 static struct spi_board_info palmte_spi_info[] __initdata = {
 325         {
 326                 .modalias       = "tsc2102",
 327                 .bus_num        = 2,    /* uWire (officially) */
 328                 .chip_select    = 0,    /* As opposed to 3 */
 329                 .irq            = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
 330                 .max_speed_hz   = 8000000,
 331         },
 332 };
 333
 334 static void palmte_headphones_detect(void *data, int state)
 335 {
 336         if (state) {
 337                 /* Headphones connected, disable speaker */
 338                 omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0);
 339                 printk(KERN_INFO "PM: speaker off\n");
 340         } else {
 341                 /* Headphones unplugged, re-enable speaker */
 342                 omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1);
 343                 printk(KERN_INFO "PM: speaker on\n");
 344         }
 345 }
 346
 347 static void __init palmte_misc_gpio_setup(void)
 348 {
 349         /* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */
 350         if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) {
 351                 printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
 352                 return;
 353         }
 354         omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1);
 355
 356         /* Set USB-or-DC-IN pin as input (unused) */
 357         if (omap_request_gpio(PALMTE_USB_OR_DC_GPIO)) {
 358                 printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
 359                 return;
 360         }
 361         omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1);
 362 }
 363
 364 static void __init omap_palmte_init(void)
 365 {
 366         omap_board_config = palmte_config;
 367         omap_board_config_size = ARRAY_SIZE(palmte_config);
 368
 369         platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
 370
 371         spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
 372         palmte_misc_gpio_setup();
 373         omap_serial_init();
 374         omap_register_i2c_bus(1, 100, NULL, 0);
 375 }
 376
 377 static void __init omap_palmte_map_io(void)
 378 {
 379         omap1_map_common_io();
 380 }
 381
 382 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 383         .phys_io        = 0xfff00000,
 384         .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
 385         .boot_params    = 0x10000100,
 386         .map_io         = omap_palmte_map_io,
 387         .init_irq       = omap_palmte_init_irq,
 388         .init_machine   = omap_palmte_init,
 389         .timer          = &omap_timer,
 390 MACHINE_END