git.oblomov.eu Git - linux-2.6/blob - drivers/pci/hotplug/ibmphp_hpc.c

   1 /*
   2  * IBM Hot Plug Controller Driver
   3  *
   4  * Written By: Jyoti Shah, IBM Corporation
   5  *
   6  * Copyright (C) 2001-2003 IBM Corp.
   7  *
   8  * All rights reserved.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or (at
  13  * your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful, but
  16  * WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  18  * NON INFRINGEMENT.  See the GNU General Public License for more
  19  * details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  24  *
  25  * Send feedback to <gregkh@us.ibm.com>
  26  *                  <jshah@us.ibm.com>
  27  *
  28  */
  29
  30 #include <linux/wait.h>
  31 #include <linux/time.h>
  32 #include <linux/delay.h>
  33 #include <linux/module.h>
  34 #include <linux/pci.h>
  35 #include <linux/smp_lock.h>
  36 #include <linux/init.h>
  37 #include "ibmphp.h"
  38
  39 static int to_debug = FALSE;
  40 #define debug_polling(fmt, arg...)      do { if (to_debug) debug (fmt, arg); } while (0)
  41
  42 //----------------------------------------------------------------------------
  43 // timeout values
  44 //----------------------------------------------------------------------------
  45 #define CMD_COMPLETE_TOUT_SEC   60      // give HPC 60 sec to finish cmd
  46 #define HPC_CTLR_WORKING_TOUT   60      // give HPC 60 sec to finish cmd
  47 #define HPC_GETACCESS_TIMEOUT   60      // seconds
  48 #define POLL_INTERVAL_SEC       2       // poll HPC every 2 seconds
  49 #define POLL_LATCH_CNT          5       // poll latch 5 times, then poll slots
  50
  51 //----------------------------------------------------------------------------
  52 // Winnipeg Architected Register Offsets
  53 //----------------------------------------------------------------------------
  54 #define WPG_I2CMBUFL_OFFSET     0x08    // I2C Message Buffer Low
  55 #define WPG_I2CMOSUP_OFFSET     0x10    // I2C Master Operation Setup Reg
  56 #define WPG_I2CMCNTL_OFFSET     0x20    // I2C Master Control Register
  57 #define WPG_I2CPARM_OFFSET      0x40    // I2C Parameter Register
  58 #define WPG_I2CSTAT_OFFSET      0x70    // I2C Status Register
  59
  60 //----------------------------------------------------------------------------
  61 // Winnipeg Store Type commands (Add this commands to the register offset)
  62 //----------------------------------------------------------------------------
  63 #define WPG_I2C_AND             0x1000  // I2C AND operation
  64 #define WPG_I2C_OR              0x2000  // I2C OR operation
  65
  66 //----------------------------------------------------------------------------
  67 // Command set for I2C Master Operation Setup Register
  68 //----------------------------------------------------------------------------
  69 #define WPG_READATADDR_MASK     0x00010000      // read,bytes,I2C shifted,index
  70 #define WPG_WRITEATADDR_MASK    0x40010000      // write,bytes,I2C shifted,index
  71 #define WPG_READDIRECT_MASK     0x10010000
  72 #define WPG_WRITEDIRECT_MASK    0x60010000
  73
  74
  75 //----------------------------------------------------------------------------
  76 // bit masks for I2C Master Control Register
  77 //----------------------------------------------------------------------------
  78 #define WPG_I2CMCNTL_STARTOP_MASK       0x00000002      // Start the Operation
  79
  80 //----------------------------------------------------------------------------
  81 //
  82 //----------------------------------------------------------------------------
  83 #define WPG_I2C_IOREMAP_SIZE    0x2044  // size of linear address interval
  84
  85 //----------------------------------------------------------------------------
  86 // command index
  87 //----------------------------------------------------------------------------
  88 #define WPG_1ST_SLOT_INDEX      0x01    // index - 1st slot for ctlr
  89 #define WPG_CTLR_INDEX          0x0F    // index - ctlr
  90 #define WPG_1ST_EXTSLOT_INDEX   0x10    // index - 1st ext slot for ctlr
  91 #define WPG_1ST_BUS_INDEX       0x1F    // index - 1st bus for ctlr
  92
  93 //----------------------------------------------------------------------------
  94 // macro utilities
  95 //----------------------------------------------------------------------------
  96 // if bits 20,22,25,26,27,29,30 are OFF return TRUE
  97 #define HPC_I2CSTATUS_CHECK(s)  ((u8)((s & 0x00000A76) ? FALSE : TRUE))
  98
  99 //----------------------------------------------------------------------------
 100 // global variables
 101 //----------------------------------------------------------------------------
 102 static int ibmphp_shutdown;
 103 static int tid_poll;
 104 static struct semaphore sem_hpcaccess;  // lock access to HPC
 105 static struct semaphore semOperations;  // lock all operations and
 106                                         // access to data structures
 107 static struct semaphore sem_exit;       // make sure polling thread goes away
 108 //----------------------------------------------------------------------------
 109 // local function prototypes
 110 //----------------------------------------------------------------------------
 111 static u8 i2c_ctrl_read (struct controller *, void __iomem *, u8);
 112 static u8 i2c_ctrl_write (struct controller *, void __iomem *, u8, u8);
 113 static u8 hpc_writecmdtoindex (u8, u8);
 114 static u8 hpc_readcmdtoindex (u8, u8);
 115 static void get_hpc_access (void);
 116 static void free_hpc_access (void);
 117 static void poll_hpc (void);
 118 static int process_changeinstatus (struct slot *, struct slot *);
 119 static int process_changeinlatch (u8, u8, struct controller *);
 120 static int hpc_poll_thread (void *);
 121 static int hpc_wait_ctlr_notworking (int, struct controller *, void __iomem *, u8 *);
 122 //----------------------------------------------------------------------------
 123
 124
 125 /*----------------------------------------------------------------------
 126 * Name:    ibmphp_hpc_initvars
 127 *
 128 * Action:  initialize semaphores and variables
 129 *---------------------------------------------------------------------*/
 130 void __init ibmphp_hpc_initvars (void)
 131 {
 132         debug ("%s - Entry\n", __FUNCTION__);
 133
 134         init_MUTEX (&sem_hpcaccess);
 135         init_MUTEX (&semOperations);
 136         init_MUTEX_LOCKED (&sem_exit);
 137         to_debug = FALSE;
 138         ibmphp_shutdown = FALSE;
 139         tid_poll = 0;
 140
 141         debug ("%s - Exit\n", __FUNCTION__);
 142 }
 143
 144 /*----------------------------------------------------------------------
 145 * Name:    i2c_ctrl_read
 146 *
 147 * Action:  read from HPC over I2C
 148 *
 149 *---------------------------------------------------------------------*/
 150 static u8 i2c_ctrl_read (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index)
 151 {
 152         u8 status;
 153         int i;
 154         void __iomem *wpg_addr; // base addr + offset
 155         unsigned long wpg_data; // data to/from WPG LOHI format
 156         unsigned long ultemp;
 157         unsigned long data;     // actual data HILO format
 158
 159         debug_polling ("%s - Entry WPGBbar[%p] index[%x] \n", __FUNCTION__, WPGBbar, index);
 160
 161         //--------------------------------------------------------------------
 162         // READ - step 1
 163         // read at address, byte length, I2C address (shifted), index
 164         // or read direct, byte length, index
 165         if (ctlr_ptr->ctlr_type == 0x02) {
 166                 data = WPG_READATADDR_MASK;
 167                 // fill in I2C address
 168                 ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
 169                 ultemp = ultemp >> 1;
 170                 data |= (ultemp << 8);
 171
 172                 // fill in index
 173                 data |= (unsigned long)index;
 174         } else if (ctlr_ptr->ctlr_type == 0x04) {
 175                 data = WPG_READDIRECT_MASK;
 176
 177                 // fill in index
 178                 ultemp = (unsigned long)index;
 179                 ultemp = ultemp << 8;
 180                 data |= ultemp;
 181         } else {
 182                 err ("this controller type is not supported \n");
 183                 return HPC_ERROR;
 184         }
 185
 186         wpg_data = swab32 (data);       // swap data before writing
 187         wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
 188         writel (wpg_data, wpg_addr);
 189
 190         //--------------------------------------------------------------------
 191         // READ - step 2 : clear the message buffer
 192         data = 0x00000000;
 193         wpg_data = swab32 (data);
 194         wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
 195         writel (wpg_data, wpg_addr);
 196
 197         //--------------------------------------------------------------------
 198         // READ - step 3 : issue start operation, I2C master control bit 30:ON
 199         //                 2020 : [20] OR operation at [20] offset 0x20
 200         data = WPG_I2CMCNTL_STARTOP_MASK;
 201         wpg_data = swab32 (data);
 202         wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
 203         writel (wpg_data, wpg_addr);
 204
 205         //--------------------------------------------------------------------
 206         // READ - step 4 : wait until start operation bit clears
 207         i = CMD_COMPLETE_TOUT_SEC;
 208         while (i) {
 209                 msleep(10);
 210                 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
 211                 wpg_data = readl (wpg_addr);
 212                 data = swab32 (wpg_data);
 213                 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
 214                         break;
 215                 i--;
 216         }
 217         if (i == 0) {
 218                 debug ("%s - Error : WPG timeout\n", __FUNCTION__);
 219                 return HPC_ERROR;
 220         }
 221         //--------------------------------------------------------------------
 222         // READ - step 5 : read I2C status register
 223         i = CMD_COMPLETE_TOUT_SEC;
 224         while (i) {
 225                 msleep(10);
 226                 wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
 227                 wpg_data = readl (wpg_addr);
 228                 data = swab32 (wpg_data);
 229                 if (HPC_I2CSTATUS_CHECK (data))
 230                         break;
 231                 i--;
 232         }
 233         if (i == 0) {
 234                 debug ("ctrl_read - Exit Error:I2C timeout\n");
 235                 return HPC_ERROR;
 236         }
 237
 238         //--------------------------------------------------------------------
 239         // READ - step 6 : get DATA
 240         wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
 241         wpg_data = readl (wpg_addr);
 242         data = swab32 (wpg_data);
 243
 244         status = (u8) data;
 245
 246         debug_polling ("%s - Exit index[%x] status[%x]\n", __FUNCTION__, index, status);
 247
 248         return (status);
 249 }
 250
 251 /*----------------------------------------------------------------------
 252 * Name:    i2c_ctrl_write
 253 *
 254 * Action:  write to HPC over I2C
 255 *
 256 * Return   0 or error codes
 257 *---------------------------------------------------------------------*/
 258 static u8 i2c_ctrl_write (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index, u8 cmd)
 259 {
 260         u8 rc;
 261         void __iomem *wpg_addr; // base addr + offset
 262         unsigned long wpg_data; // data to/from WPG LOHI format
 263         unsigned long ultemp;
 264         unsigned long data;     // actual data HILO format
 265         int i;
 266
 267         debug_polling ("%s - Entry WPGBbar[%p] index[%x] cmd[%x]\n", __FUNCTION__, WPGBbar, index, cmd);
 268
 269         rc = 0;
 270         //--------------------------------------------------------------------
 271         // WRITE - step 1
 272         // write at address, byte length, I2C address (shifted), index
 273         // or write direct, byte length, index
 274         data = 0x00000000;
 275
 276         if (ctlr_ptr->ctlr_type == 0x02) {
 277                 data = WPG_WRITEATADDR_MASK;
 278                 // fill in I2C address
 279                 ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
 280                 ultemp = ultemp >> 1;
 281                 data |= (ultemp << 8);
 282
 283                 // fill in index
 284                 data |= (unsigned long)index;
 285         } else if (ctlr_ptr->ctlr_type == 0x04) {
 286                 data = WPG_WRITEDIRECT_MASK;
 287
 288                 // fill in index
 289                 ultemp = (unsigned long)index;
 290                 ultemp = ultemp << 8;
 291                 data |= ultemp;
 292         } else {
 293                 err ("this controller type is not supported \n");
 294                 return HPC_ERROR;
 295         }
 296
 297         wpg_data = swab32 (data);       // swap data before writing
 298         wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
 299         writel (wpg_data, wpg_addr);
 300
 301         //--------------------------------------------------------------------
 302         // WRITE - step 2 : clear the message buffer
 303         data = 0x00000000 | (unsigned long)cmd;
 304         wpg_data = swab32 (data);
 305         wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
 306         writel (wpg_data, wpg_addr);
 307
 308         //--------------------------------------------------------------------
 309         // WRITE - step 3 : issue start operation,I2C master control bit 30:ON
 310         //                 2020 : [20] OR operation at [20] offset 0x20
 311         data = WPG_I2CMCNTL_STARTOP_MASK;
 312         wpg_data = swab32 (data);
 313         wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
 314         writel (wpg_data, wpg_addr);
 315
 316         //--------------------------------------------------------------------
 317         // WRITE - step 4 : wait until start operation bit clears
 318         i = CMD_COMPLETE_TOUT_SEC;
 319         while (i) {
 320                 msleep(10);
 321                 wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
 322                 wpg_data = readl (wpg_addr);
 323                 data = swab32 (wpg_data);
 324                 if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
 325                         break;
 326                 i--;
 327         }
 328         if (i == 0) {
 329                 debug ("%s - Exit Error:WPG timeout\n", __FUNCTION__);
 330                 rc = HPC_ERROR;
 331         }
 332
 333         //--------------------------------------------------------------------
 334         // WRITE - step 5 : read I2C status register
 335         i = CMD_COMPLETE_TOUT_SEC;
 336         while (i) {
 337                 msleep(10);
 338                 wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
 339                 wpg_data = readl (wpg_addr);
 340                 data = swab32 (wpg_data);
 341                 if (HPC_I2CSTATUS_CHECK (data))
 342                         break;
 343                 i--;
 344         }
 345         if (i == 0) {
 346                 debug ("ctrl_read - Error : I2C timeout\n");
 347                 rc = HPC_ERROR;
 348         }
 349
 350         debug_polling ("%s Exit rc[%x]\n", __FUNCTION__, rc);
 351         return (rc);
 352 }
 353
 354 //------------------------------------------------------------
 355 //  Read from ISA type HPC
 356 //------------------------------------------------------------
 357 static u8 isa_ctrl_read (struct controller *ctlr_ptr, u8 offset)
 358 {
 359         u16 start_address;
 360         u16 end_address;
 361         u8 data;
 362
 363         start_address = ctlr_ptr->u.isa_ctlr.io_start;
 364         end_address = ctlr_ptr->u.isa_ctlr.io_end;
 365         data = inb (start_address + offset);
 366         return data;
 367 }
 368
 369 //--------------------------------------------------------------
 370 // Write to ISA type HPC
 371 //--------------------------------------------------------------
 372 static void isa_ctrl_write (struct controller *ctlr_ptr, u8 offset, u8 data)
 373 {
 374         u16 start_address;
 375         u16 port_address;
 376
 377         start_address = ctlr_ptr->u.isa_ctlr.io_start;
 378         port_address = start_address + (u16) offset;
 379         outb (data, port_address);
 380 }
 381
 382 static u8 pci_ctrl_read (struct controller *ctrl, u8 offset)
 383 {
 384         u8 data = 0x00;
 385         debug ("inside pci_ctrl_read\n");
 386         if (ctrl->ctrl_dev)
 387                 pci_read_config_byte (ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, &data);
 388         return data;
 389 }
 390
 391 static u8 pci_ctrl_write (struct controller *ctrl, u8 offset, u8 data)
 392 {
 393         u8 rc = -ENODEV;
 394         debug ("inside pci_ctrl_write\n");
 395         if (ctrl->ctrl_dev) {
 396                 pci_write_config_byte (ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, data);
 397                 rc = 0;
 398         }
 399         return rc;
 400 }
 401
 402 static u8 ctrl_read (struct controller *ctlr, void __iomem *base, u8 offset)
 403 {
 404         u8 rc;
 405         switch (ctlr->ctlr_type) {
 406         case 0:
 407                 rc = isa_ctrl_read (ctlr, offset);
 408                 break;
 409         case 1:
 410                 rc = pci_ctrl_read (ctlr, offset);
 411                 break;
 412         case 2:
 413         case 4:
 414                 rc = i2c_ctrl_read (ctlr, base, offset);
 415                 break;
 416         default:
 417                 return -ENODEV;
 418         }
 419         return rc;
 420 }
 421
 422 static u8 ctrl_write (struct controller *ctlr, void __iomem *base, u8 offset, u8 data)
 423 {
 424         u8 rc = 0;
 425         switch (ctlr->ctlr_type) {
 426         case 0:
 427                 isa_ctrl_write(ctlr, offset, data);
 428                 break;
 429         case 1:
 430                 rc = pci_ctrl_write (ctlr, offset, data);
 431                 break;
 432         case 2:
 433         case 4:
 434                 rc = i2c_ctrl_write(ctlr, base, offset, data);
 435                 break;
 436         default:
 437                 return -ENODEV;
 438         }
 439         return rc;
 440 }
 441 /*----------------------------------------------------------------------
 442 * Name:    hpc_writecmdtoindex()
 443 *
 444 * Action:  convert a write command to proper index within a controller
 445 *
 446 * Return   index, HPC_ERROR
 447 *---------------------------------------------------------------------*/
 448 static u8 hpc_writecmdtoindex (u8 cmd, u8 index)
 449 {
 450         u8 rc;
 451
 452         switch (cmd) {
 453         case HPC_CTLR_ENABLEIRQ:        // 0x00.N.15
 454         case HPC_CTLR_CLEARIRQ: // 0x06.N.15
 455         case HPC_CTLR_RESET:    // 0x07.N.15
 456         case HPC_CTLR_IRQSTEER: // 0x08.N.15
 457         case HPC_CTLR_DISABLEIRQ:       // 0x01.N.15
 458         case HPC_ALLSLOT_ON:    // 0x11.N.15
 459         case HPC_ALLSLOT_OFF:   // 0x12.N.15
 460                 rc = 0x0F;
 461                 break;
 462
 463         case HPC_SLOT_OFF:      // 0x02.Y.0-14
 464         case HPC_SLOT_ON:       // 0x03.Y.0-14
 465         case HPC_SLOT_ATTNOFF:  // 0x04.N.0-14
 466         case HPC_SLOT_ATTNON:   // 0x05.N.0-14
 467         case HPC_SLOT_BLINKLED: // 0x13.N.0-14
 468                 rc = index;
 469                 break;
 470
 471         case HPC_BUS_33CONVMODE:
 472         case HPC_BUS_66CONVMODE:
 473         case HPC_BUS_66PCIXMODE:
 474         case HPC_BUS_100PCIXMODE:
 475         case HPC_BUS_133PCIXMODE:
 476                 rc = index + WPG_1ST_BUS_INDEX - 1;
 477                 break;
 478
 479         default:
 480                 err ("hpc_writecmdtoindex - Error invalid cmd[%x]\n", cmd);
 481                 rc = HPC_ERROR;
 482         }
 483
 484         return rc;
 485 }
 486
 487 /*----------------------------------------------------------------------
 488 * Name:    hpc_readcmdtoindex()
 489 *
 490 * Action:  convert a read command to proper index within a controller
 491 *
 492 * Return   index, HPC_ERROR
 493 *---------------------------------------------------------------------*/
 494 static u8 hpc_readcmdtoindex (u8 cmd, u8 index)
 495 {
 496         u8 rc;
 497
 498         switch (cmd) {
 499         case READ_CTLRSTATUS:
 500                 rc = 0x0F;
 501                 break;
 502         case READ_SLOTSTATUS:
 503         case READ_ALLSTAT:
 504                 rc = index;
 505                 break;
 506         case READ_EXTSLOTSTATUS:
 507                 rc = index + WPG_1ST_EXTSLOT_INDEX;
 508                 break;
 509         case READ_BUSSTATUS:
 510                 rc = index + WPG_1ST_BUS_INDEX - 1;
 511                 break;
 512         case READ_SLOTLATCHLOWREG:
 513                 rc = 0x28;
 514                 break;
 515         case READ_REVLEVEL:
 516                 rc = 0x25;
 517                 break;
 518         case READ_HPCOPTIONS:
 519                 rc = 0x27;
 520                 break;
 521         default:
 522                 rc = HPC_ERROR;
 523         }
 524         return rc;
 525 }
 526
 527 /*----------------------------------------------------------------------
 528 * Name:    HPCreadslot()
 529 *
 530 * Action:  issue a READ command to HPC
 531 *
 532 * Input:   pslot   - can not be NULL for READ_ALLSTAT
 533 *          pstatus - can be NULL for READ_ALLSTAT
 534 *
 535 * Return   0 or error codes
 536 *---------------------------------------------------------------------*/
 537 int ibmphp_hpc_readslot (struct slot * pslot, u8 cmd, u8 * pstatus)
 538 {
 539         void __iomem *wpg_bbar = NULL;
 540         struct controller *ctlr_ptr;
 541         struct list_head *pslotlist;
 542         u8 index, status;
 543         int rc = 0;
 544         int busindex;
 545
 546         debug_polling ("%s - Entry pslot[%p] cmd[%x] pstatus[%p]\n", __FUNCTION__, pslot, cmd, pstatus);
 547
 548         if ((pslot == NULL)
 549             || ((pstatus == NULL) && (cmd != READ_ALLSTAT) && (cmd != READ_BUSSTATUS))) {
 550                 rc = -EINVAL;
 551                 err ("%s - Error invalid pointer, rc[%d]\n", __FUNCTION__, rc);
 552                 return rc;
 553         }
 554
 555         if (cmd == READ_BUSSTATUS) {
 556                 busindex = ibmphp_get_bus_index (pslot->bus);
 557                 if (busindex < 0) {
 558                         rc = -EINVAL;
 559                         err ("%s - Exit Error:invalid bus, rc[%d]\n", __FUNCTION__, rc);
 560                         return rc;
 561                 } else
 562                         index = (u8) busindex;
 563         } else
 564                 index = pslot->ctlr_index;
 565
 566         index = hpc_readcmdtoindex (cmd, index);
 567
 568         if (index == HPC_ERROR) {
 569                 rc = -EINVAL;
 570                 err ("%s - Exit Error:invalid index, rc[%d]\n", __FUNCTION__, rc);
 571                 return rc;
 572         }
 573
 574         ctlr_ptr = pslot->ctrl;
 575
 576         get_hpc_access ();
 577
 578         //--------------------------------------------------------------------
 579         // map physical address to logical address
 580         //--------------------------------------------------------------------
 581         if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
 582                 wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
 583
 584         //--------------------------------------------------------------------
 585         // check controller status before reading
 586         //--------------------------------------------------------------------
 587         rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
 588         if (!rc) {
 589                 switch (cmd) {
 590                 case READ_ALLSTAT:
 591                         // update the slot structure
 592                         pslot->ctrl->status = status;
 593                         pslot->status = ctrl_read (ctlr_ptr, wpg_bbar, index);
 594                         rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
 595                                                        &status);
 596                         if (!rc)
 597                                 pslot->ext_status = ctrl_read (ctlr_ptr, wpg_bbar, index + WPG_1ST_EXTSLOT_INDEX);
 598
 599                         break;
 600
 601                 case READ_SLOTSTATUS:
 602                         // DO NOT update the slot structure
 603                         *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 604                         break;
 605
 606                 case READ_EXTSLOTSTATUS:
 607                         // DO NOT update the slot structure
 608                         *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 609                         break;
 610
 611                 case READ_CTLRSTATUS:
 612                         // DO NOT update the slot structure
 613                         *pstatus = status;
 614                         break;
 615
 616                 case READ_BUSSTATUS:
 617                         pslot->busstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 618                         break;
 619                 case READ_REVLEVEL:
 620                         *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 621                         break;
 622                 case READ_HPCOPTIONS:
 623                         *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 624                         break;
 625                 case READ_SLOTLATCHLOWREG:
 626                         // DO NOT update the slot structure
 627                         *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
 628                         break;
 629
 630                         // Not used
 631                 case READ_ALLSLOT:
 632                         list_for_each (pslotlist, &ibmphp_slot_head) {
 633                                 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
 634                                 index = pslot->ctlr_index;
 635                                 rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr,
 636                                                                 wpg_bbar, &status);
 637                                 if (!rc) {
 638                                         pslot->status = ctrl_read (ctlr_ptr, wpg_bbar, index);
 639                                         rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT,
 640                                                                         ctlr_ptr, wpg_bbar, &status);
 641                                         if (!rc)
 642                                                 pslot->ext_status =
 643                                                     ctrl_read (ctlr_ptr, wpg_bbar,
 644                                                                 index + WPG_1ST_EXTSLOT_INDEX);
 645                                 } else {
 646                                         err ("%s - Error ctrl_read failed\n", __FUNCTION__);
 647                                         rc = -EINVAL;
 648                                         break;
 649                                 }
 650                         }
 651                         break;
 652                 default:
 653                         rc = -EINVAL;
 654                         break;
 655                 }
 656         }
 657         //--------------------------------------------------------------------
 658         // cleanup
 659         //--------------------------------------------------------------------
 660
 661         // remove physical to logical address mapping
 662         if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
 663                 iounmap (wpg_bbar);
 664
 665         free_hpc_access ();
 666
 667         debug_polling ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
 668         return rc;
 669 }
 670
 671 /*----------------------------------------------------------------------
 672 * Name:    ibmphp_hpc_writeslot()
 673 *
 674 * Action: issue a WRITE command to HPC
 675 *---------------------------------------------------------------------*/
 676 int ibmphp_hpc_writeslot (struct slot * pslot, u8 cmd)
 677 {
 678         void __iomem *wpg_bbar = NULL;
 679         struct controller *ctlr_ptr;
 680         u8 index, status;
 681         int busindex;
 682         u8 done;
 683         int rc = 0;
 684         int timeout;
 685
 686         debug_polling ("%s - Entry pslot[%p] cmd[%x]\n", __FUNCTION__, pslot, cmd);
 687         if (pslot == NULL) {
 688                 rc = -EINVAL;
 689                 err ("%s - Error Exit rc[%d]\n", __FUNCTION__, rc);
 690                 return rc;
 691         }
 692
 693         if ((cmd == HPC_BUS_33CONVMODE) || (cmd == HPC_BUS_66CONVMODE) ||
 694                 (cmd == HPC_BUS_66PCIXMODE) || (cmd == HPC_BUS_100PCIXMODE) ||
 695                 (cmd == HPC_BUS_133PCIXMODE)) {
 696                 busindex = ibmphp_get_bus_index (pslot->bus);
 697                 if (busindex < 0) {
 698                         rc = -EINVAL;
 699                         err ("%s - Exit Error:invalid bus, rc[%d]\n", __FUNCTION__, rc);
 700                         return rc;
 701                 } else
 702                         index = (u8) busindex;
 703         } else
 704                 index = pslot->ctlr_index;
 705
 706         index = hpc_writecmdtoindex (cmd, index);
 707
 708         if (index == HPC_ERROR) {
 709                 rc = -EINVAL;
 710                 err ("%s - Error Exit rc[%d]\n", __FUNCTION__, rc);
 711                 return rc;
 712         }
 713
 714         ctlr_ptr = pslot->ctrl;
 715
 716         get_hpc_access ();
 717
 718         //--------------------------------------------------------------------
 719         // map physical address to logical address
 720         //--------------------------------------------------------------------
 721         if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4)) {
 722                 wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
 723
 724                 debug ("%s - ctlr id[%x] physical[%lx] logical[%lx] i2c[%x]\n", __FUNCTION__,
 725                 ctlr_ptr->ctlr_id, (ulong) (ctlr_ptr->u.wpeg_ctlr.wpegbbar), (ulong) wpg_bbar,
 726                 ctlr_ptr->u.wpeg_ctlr.i2c_addr);
 727         }
 728         //--------------------------------------------------------------------
 729         // check controller status before writing
 730         //--------------------------------------------------------------------
 731         rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
 732         if (!rc) {
 733
 734                 ctrl_write (ctlr_ptr, wpg_bbar, index, cmd);
 735
 736                 //--------------------------------------------------------------------
 737                 // check controller is still not working on the command
 738                 //--------------------------------------------------------------------
 739                 timeout = CMD_COMPLETE_TOUT_SEC;
 740                 done = FALSE;
 741                 while (!done) {
 742                         rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
 743                                                         &status);
 744                         if (!rc) {
 745                                 if (NEEDTOCHECK_CMDSTATUS (cmd)) {
 746                                         if (CTLR_FINISHED (status) == HPC_CTLR_FINISHED_YES)
 747                                                 done = TRUE;
 748                                 } else
 749                                         done = TRUE;
 750                         }
 751                         if (!done) {
 752                                 msleep(1000);
 753                                 if (timeout < 1) {
 754                                         done = TRUE;
 755                                         err ("%s - Error command complete timeout\n", __FUNCTION__);
 756                                         rc = -EFAULT;
 757                                 } else
 758                                         timeout--;
 759                         }
 760                 }
 761                 ctlr_ptr->status = status;
 762         }
 763         // cleanup
 764
 765         // remove physical to logical address mapping
 766         if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
 767                 iounmap (wpg_bbar);
 768         free_hpc_access ();
 769
 770         debug_polling ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
 771         return rc;
 772 }
 773
 774 /*----------------------------------------------------------------------
 775 * Name:    get_hpc_access()
 776 *
 777 * Action: make sure only one process can access HPC at one time
 778 *---------------------------------------------------------------------*/
 779 static void get_hpc_access (void)
 780 {
 781         down (&sem_hpcaccess);
 782 }
 783
 784 /*----------------------------------------------------------------------
 785 * Name:    free_hpc_access()
 786 *---------------------------------------------------------------------*/
 787 void free_hpc_access (void)
 788 {
 789         up (&sem_hpcaccess);
 790 }
 791
 792 /*----------------------------------------------------------------------
 793 * Name:    ibmphp_lock_operations()
 794 *
 795 * Action: make sure only one process can change the data structure
 796 *---------------------------------------------------------------------*/
 797 void ibmphp_lock_operations (void)
 798 {
 799         down (&semOperations);
 800         to_debug = TRUE;
 801 }
 802
 803 /*----------------------------------------------------------------------
 804 * Name:    ibmphp_unlock_operations()
 805 *---------------------------------------------------------------------*/
 806 void ibmphp_unlock_operations (void)
 807 {
 808         debug ("%s - Entry\n", __FUNCTION__);
 809         up (&semOperations);
 810         to_debug = FALSE;
 811         debug ("%s - Exit\n", __FUNCTION__);
 812 }
 813
 814 /*----------------------------------------------------------------------
 815 * Name:    poll_hpc()
 816 *---------------------------------------------------------------------*/
 817 #define POLL_LATCH_REGISTER     0
 818 #define POLL_SLOTS              1
 819 #define POLL_SLEEP              2
 820 static void poll_hpc (void)
 821 {
 822         struct slot myslot;
 823         struct slot *pslot = NULL;
 824         struct list_head *pslotlist;
 825         int rc;
 826         int poll_state = POLL_LATCH_REGISTER;
 827         u8 oldlatchlow = 0x00;
 828         u8 curlatchlow = 0x00;
 829         int poll_count = 0;
 830         u8 ctrl_count = 0x00;
 831
 832         debug ("%s - Entry\n", __FUNCTION__);
 833
 834         while (!ibmphp_shutdown) {
 835                 if (ibmphp_shutdown)
 836                         break;
 837
 838                 /* try to get the lock to do some kind of hardware access */
 839                 down (&semOperations);
 840
 841                 switch (poll_state) {
 842                 case POLL_LATCH_REGISTER:
 843                         oldlatchlow = curlatchlow;
 844                         ctrl_count = 0x00;
 845                         list_for_each (pslotlist, &ibmphp_slot_head) {
 846                                 if (ctrl_count >= ibmphp_get_total_controllers())
 847                                         break;
 848                                 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
 849                                 if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
 850                                         ctrl_count++;
 851                                         if (READ_SLOT_LATCH (pslot->ctrl)) {
 852                                                 rc = ibmphp_hpc_readslot (pslot,
 853                                                                           READ_SLOTLATCHLOWREG,
 854                                                                           &curlatchlow);
 855                                                 if (oldlatchlow != curlatchlow)
 856                                                         process_changeinlatch (oldlatchlow,
 857                                                                                curlatchlow,
 858                                                                                pslot->ctrl);
 859                                         }
 860                                 }
 861                         }
 862                         ++poll_count;
 863                         poll_state = POLL_SLEEP;
 864                         break;
 865                 case POLL_SLOTS:
 866                         list_for_each (pslotlist, &ibmphp_slot_head) {
 867                                 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
 868                                 // make a copy of the old status
 869                                 memcpy ((void *) &myslot, (void *) pslot,
 870                                         sizeof (struct slot));
 871                                 rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
 872                                 if ((myslot.status != pslot->status)
 873                                     || (myslot.ext_status != pslot->ext_status))
 874                                         process_changeinstatus (pslot, &myslot);
 875                         }
 876                         ctrl_count = 0x00;
 877                         list_for_each (pslotlist, &ibmphp_slot_head) {
 878                                 if (ctrl_count >= ibmphp_get_total_controllers())
 879                                         break;
 880                                 pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
 881                                 if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
 882                                         ctrl_count++;
 883                                         if (READ_SLOT_LATCH (pslot->ctrl))
 884                                                 rc = ibmphp_hpc_readslot (pslot,
 885                                                                           READ_SLOTLATCHLOWREG,
 886                                                                           &curlatchlow);
 887                                 }
 888                         }
 889                         ++poll_count;
 890                         poll_state = POLL_SLEEP;
 891                         break;
 892                 case POLL_SLEEP:
 893                         /* don't sleep with a lock on the hardware */
 894                         up (&semOperations);
 895                         msleep(POLL_INTERVAL_SEC * 1000);
 896
 897                         if (ibmphp_shutdown)
 898                                 break;
 899
 900                         down (&semOperations);
 901
 902                         if (poll_count >= POLL_LATCH_CNT) {
 903                                 poll_count = 0;
 904                                 poll_state = POLL_SLOTS;
 905                         } else
 906                                 poll_state = POLL_LATCH_REGISTER;
 907                         break;
 908                 }
 909                 /* give up the hardware semaphore */
 910                 up (&semOperations);
 911                 /* sleep for a short time just for good measure */
 912                 msleep(100);
 913         }
 914         up (&sem_exit);
 915         debug ("%s - Exit\n", __FUNCTION__);
 916 }
 917
 918
 919 /*----------------------------------------------------------------------
 920 * Name:    process_changeinstatus
 921 *
 922 * Action:  compare old and new slot status, process the change in status
 923 *
 924 * Input:   pointer to slot struct, old slot struct
 925 *
 926 * Return   0 or error codes
 927 * Value:
 928 *
 929 * Side
 930 * Effects: None.
 931 *
 932 * Notes:
 933 *---------------------------------------------------------------------*/
 934 static int process_changeinstatus (struct slot *pslot, struct slot *poldslot)
 935 {
 936         u8 status;
 937         int rc = 0;
 938         u8 disable = FALSE;
 939         u8 update = FALSE;
 940
 941         debug ("process_changeinstatus - Entry pslot[%p], poldslot[%p]\n", pslot, poldslot);
 942
 943         // bit 0 - HPC_SLOT_POWER
 944         if ((pslot->status & 0x01) != (poldslot->status & 0x01))
 945                 update = TRUE;
 946
 947         // bit 1 - HPC_SLOT_CONNECT
 948         // ignore
 949
 950         // bit 2 - HPC_SLOT_ATTN
 951         if ((pslot->status & 0x04) != (poldslot->status & 0x04))
 952                 update = TRUE;
 953
 954         // bit 3 - HPC_SLOT_PRSNT2
 955         // bit 4 - HPC_SLOT_PRSNT1
 956         if (((pslot->status & 0x08) != (poldslot->status & 0x08))
 957                 || ((pslot->status & 0x10) != (poldslot->status & 0x10)))
 958                 update = TRUE;
 959
 960         // bit 5 - HPC_SLOT_PWRGD
 961         if ((pslot->status & 0x20) != (poldslot->status & 0x20))
 962                 // OFF -> ON: ignore, ON -> OFF: disable slot
 963                 if ((poldslot->status & 0x20) && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status)))
 964                         disable = TRUE;
 965
 966         // bit 6 - HPC_SLOT_BUS_SPEED
 967         // ignore
 968
 969         // bit 7 - HPC_SLOT_LATCH
 970         if ((pslot->status & 0x80) != (poldslot->status & 0x80)) {
 971                 update = TRUE;
 972                 // OPEN -> CLOSE
 973                 if (pslot->status & 0x80) {
 974                         if (SLOT_PWRGD (pslot->status)) {
 975                                 // power goes on and off after closing latch
 976                                 // check again to make sure power is still ON
 977                                 msleep(1000);
 978                                 rc = ibmphp_hpc_readslot (pslot, READ_SLOTSTATUS, &status);
 979                                 if (SLOT_PWRGD (status))
 980                                         update = TRUE;
 981                                 else    // overwrite power in pslot to OFF
 982                                         pslot->status &= ~HPC_SLOT_POWER;
 983                         }
 984                 }
 985                 // CLOSE -> OPEN
 986                 else if ((SLOT_PWRGD (poldslot->status) == HPC_SLOT_PWRGD_GOOD)
 987                         && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status))) {
 988                         disable = TRUE;
 989                 }
 990                 // else - ignore
 991         }
 992         // bit 4 - HPC_SLOT_BLINK_ATTN
 993         if ((pslot->ext_status & 0x08) != (poldslot->ext_status & 0x08))
 994                 update = TRUE;
 995
 996         if (disable) {
 997                 debug ("process_changeinstatus - disable slot\n");
 998                 pslot->flag = FALSE;
 999                 rc = ibmphp_do_disable_slot (pslot);
1000         }
1001
1002         if (update || disable) {
1003                 ibmphp_update_slot_info (pslot);
1004         }
1005
1006         debug ("%s - Exit rc[%d] disable[%x] update[%x]\n", __FUNCTION__, rc, disable, update);
1007
1008         return rc;
1009 }
1010
1011 /*----------------------------------------------------------------------
1012 * Name:    process_changeinlatch
1013 *
1014 * Action:  compare old and new latch reg status, process the change
1015 *
1016 * Input:   old and current latch register status
1017 *
1018 * Return   0 or error codes
1019 * Value:
1020 *---------------------------------------------------------------------*/
1021 static int process_changeinlatch (u8 old, u8 new, struct controller *ctrl)
1022 {
1023         struct slot myslot, *pslot;
1024         u8 i;
1025         u8 mask;
1026         int rc = 0;
1027
1028         debug ("%s - Entry old[%x], new[%x]\n", __FUNCTION__, old, new);
1029         // bit 0 reserved, 0 is LSB, check bit 1-6 for 6 slots
1030
1031         for (i = ctrl->starting_slot_num; i <= ctrl->ending_slot_num; i++) {
1032                 mask = 0x01 << i;
1033                 if ((mask & old) != (mask & new)) {
1034                         pslot = ibmphp_get_slot_from_physical_num (i);
1035                         if (pslot) {
1036                                 memcpy ((void *) &myslot, (void *) pslot, sizeof (struct slot));
1037                                 rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
1038                                 debug ("%s - call process_changeinstatus for slot[%d]\n", __FUNCTION__, i);
1039                                 process_changeinstatus (pslot, &myslot);
1040                         } else {
1041                                 rc = -EINVAL;
1042                                 err ("%s - Error bad pointer for slot[%d]\n", __FUNCTION__, i);
1043                         }
1044                 }
1045         }
1046         debug ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
1047         return rc;
1048 }
1049
1050 /*----------------------------------------------------------------------
1051 * Name:    hpc_poll_thread
1052 *
1053 * Action:  polling
1054 *
1055 * Return   0
1056 * Value:
1057 *---------------------------------------------------------------------*/
1058 static int hpc_poll_thread (void *data)
1059 {
1060         debug ("%s - Entry\n", __FUNCTION__);
1061
1062         daemonize("hpc_poll");
1063         allow_signal(SIGKILL);
1064
1065         poll_hpc ();
1066
1067         tid_poll = 0;
1068         debug ("%s - Exit\n", __FUNCTION__);
1069         return 0;
1070 }
1071
1072
1073 /*----------------------------------------------------------------------
1074 * Name:    ibmphp_hpc_start_poll_thread
1075 *
1076 * Action:  start polling thread
1077 *---------------------------------------------------------------------*/
1078 int __init ibmphp_hpc_start_poll_thread (void)
1079 {
1080         int rc = 0;
1081
1082         debug ("%s - Entry\n", __FUNCTION__);
1083
1084         tid_poll = kernel_thread (hpc_poll_thread, NULL, 0);
1085         if (tid_poll < 0) {
1086                 err ("%s - Error, thread not started\n", __FUNCTION__);
1087                 rc = -1;
1088         }
1089
1090         debug ("%s - Exit tid_poll[%d] rc[%d]\n", __FUNCTION__, tid_poll, rc);
1091         return rc;
1092 }
1093
1094 /*----------------------------------------------------------------------
1095 * Name:    ibmphp_hpc_stop_poll_thread
1096 *
1097 * Action:  stop polling thread and cleanup
1098 *---------------------------------------------------------------------*/
1099 void __exit ibmphp_hpc_stop_poll_thread (void)
1100 {
1101         debug ("%s - Entry\n", __FUNCTION__);
1102
1103         ibmphp_shutdown = TRUE;
1104         debug ("before locking operations \n");
1105         ibmphp_lock_operations ();
1106         debug ("after locking operations \n");
1107
1108         // wait for poll thread to exit
1109         debug ("before sem_exit down \n");
1110         down (&sem_exit);
1111         debug ("after sem_exit down \n");
1112
1113         // cleanup
1114         debug ("before free_hpc_access \n");
1115         free_hpc_access ();
1116         debug ("after free_hpc_access \n");
1117         ibmphp_unlock_operations ();
1118         debug ("after unlock operations \n");
1119         up (&sem_exit);
1120         debug ("after sem exit up\n");
1121
1122         debug ("%s - Exit\n", __FUNCTION__);
1123 }
1124
1125 /*----------------------------------------------------------------------
1126 * Name:    hpc_wait_ctlr_notworking
1127 *
1128 * Action:  wait until the controller is in a not working state
1129 *
1130 * Return   0, HPC_ERROR
1131 * Value:
1132 *---------------------------------------------------------------------*/
1133 static int hpc_wait_ctlr_notworking (int timeout, struct controller *ctlr_ptr, void __iomem *wpg_bbar,
1134                                     u8 * pstatus)
1135 {
1136         int rc = 0;
1137         u8 done = FALSE;
1138
1139         debug_polling ("hpc_wait_ctlr_notworking - Entry timeout[%d]\n", timeout);
1140
1141         while (!done) {
1142                 *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, WPG_CTLR_INDEX);
1143                 if (*pstatus == HPC_ERROR) {
1144                         rc = HPC_ERROR;
1145                         done = TRUE;
1146                 }
1147                 if (CTLR_WORKING (*pstatus) == HPC_CTLR_WORKING_NO)
1148                         done = TRUE;
1149                 if (!done) {
1150                         msleep(1000);
1151                         if (timeout < 1) {
1152                                 done = TRUE;
1153                                 err ("HPCreadslot - Error ctlr timeout\n");
1154                                 rc = HPC_ERROR;
1155                         } else
1156                                 timeout--;
1157                 }
1158         }
1159         debug_polling ("hpc_wait_ctlr_notworking - Exit rc[%x] status[%x]\n", rc, *pstatus);
1160         return rc;
1161 }