[PATCH] libata: add back ->data_xfer to ata_piix.c
[linux-2.6] / drivers / scsi / sun3_scsi.c
1 /*
2  * Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
3  *
4  * Sun3 DMA routines added by Sam Creasey (sammy@sammy.net)
5  *
6  * Adapted from mac_scsinew.c:
7  */
8 /*
9  * Generic Macintosh NCR5380 driver
10  *
11  * Copyright 1998, Michael Schmitz <mschmitz@lbl.gov>
12  *
13  * derived in part from:
14  */
15 /*
16  * Generic Generic NCR5380 driver
17  *
18  * Copyright 1995, Russell King
19  *
20  * ALPHA RELEASE 1.
21  *
22  * For more information, please consult
23  *
24  * NCR 5380 Family
25  * SCSI Protocol Controller
26  * Databook
27  *
28  * NCR Microelectronics
29  * 1635 Aeroplaza Drive
30  * Colorado Springs, CO 80916
31  * 1+ (719) 578-3400
32  * 1+ (800) 334-5454
33  */
34
35
36 /*
37  * This is from mac_scsi.h, but hey, maybe this is useful for Sun3 too! :)
38  *
39  * Options :
40  *
41  * PARITY - enable parity checking.  Not supported.
42  *
43  * SCSI2 - enable support for SCSI-II tagged queueing.  Untested.
44  *
45  * USLEEP - enable support for devices that don't disconnect.  Untested.
46  */
47
48 /*
49  * $Log: sun3_NCR5380.c,v $
50  */
51
52 #define AUTOSENSE
53
54 #include <linux/types.h>
55 #include <linux/stddef.h>
56 #include <linux/ctype.h>
57 #include <linux/delay.h>
58
59 #include <linux/module.h>
60 #include <linux/signal.h>
61 #include <linux/sched.h>
62 #include <linux/ioport.h>
63 #include <linux/init.h>
64 #include <linux/blkdev.h>
65
66 #include <asm/io.h>
67 #include <asm/system.h>
68
69 #include <asm/sun3ints.h>
70 #include <asm/dvma.h>
71 #include <asm/idprom.h>
72 #include <asm/machines.h>
73
74 /* dma on! */
75 #define REAL_DMA
76
77 #include "scsi.h"
78 #include <scsi/scsi_host.h>
79 #include "sun3_scsi.h"
80 #include "NCR5380.h"
81
82 static void NCR5380_print(struct Scsi_Host *instance);
83
84 /* #define OLDDMA */
85
86 #define USE_WRAPPER
87 /*#define RESET_BOOT */
88 #define DRIVER_SETUP
89
90 #define NDEBUG 0
91
92 /*
93  * BUG can be used to trigger a strange code-size related hang on 2.1 kernels
94  */
95 #ifdef BUG
96 #undef RESET_BOOT
97 #undef DRIVER_SETUP
98 #endif
99
100 /* #define SUPPORT_TAGS */
101
102 #define ENABLE_IRQ()    enable_irq( IRQ_SUN3_SCSI ); 
103
104
105 static irqreturn_t scsi_sun3_intr(int irq, void *dummy, struct pt_regs *fp);
106 static inline unsigned char sun3scsi_read(int reg);
107 static inline void sun3scsi_write(int reg, int value);
108
109 static int setup_can_queue = -1;
110 module_param(setup_can_queue, int, 0);
111 static int setup_cmd_per_lun = -1;
112 module_param(setup_cmd_per_lun, int, 0);
113 static int setup_sg_tablesize = -1;
114 module_param(setup_sg_tablesize, int, 0);
115 #ifdef SUPPORT_TAGS
116 static int setup_use_tagged_queuing = -1;
117 module_param(setup_use_tagged_queuing, int, 0);
118 #endif
119 static int setup_hostid = -1;
120 module_param(setup_hostid, int, 0);
121
122 static Scsi_Cmnd *sun3_dma_setup_done = NULL;
123
124 #define AFTER_RESET_DELAY       (HZ/2)
125
126 /* ms to wait after hitting dma regs */
127 #define SUN3_DMA_DELAY 10
128
129 /* dvma buffer to allocate -- 32k should hopefully be more than sufficient */
130 #define SUN3_DVMA_BUFSIZE 0xe000
131
132 /* minimum number of bytes to do dma on */
133 #define SUN3_DMA_MINSIZE 128
134
135 static volatile unsigned char *sun3_scsi_regp;
136 static volatile struct sun3_dma_regs *dregs;
137 #ifdef OLDDMA
138 static unsigned char *dmabuf = NULL; /* dma memory buffer */
139 #endif
140 static struct sun3_udc_regs *udc_regs = NULL;
141 static unsigned char *sun3_dma_orig_addr = NULL;
142 static unsigned long sun3_dma_orig_count = 0;
143 static int sun3_dma_active = 0;
144 static unsigned long last_residual = 0;
145
146 /*
147  * NCR 5380 register access functions
148  */
149
150 static inline unsigned char sun3scsi_read(int reg)
151 {
152         return( sun3_scsi_regp[reg] );
153 }
154
155 static inline void sun3scsi_write(int reg, int value)
156 {
157         sun3_scsi_regp[reg] = value;
158 }
159
160 /* dma controller register access functions */
161
162 static inline unsigned short sun3_udc_read(unsigned char reg)
163 {
164         unsigned short ret;
165
166         dregs->udc_addr = UDC_CSR;
167         udelay(SUN3_DMA_DELAY);
168         ret = dregs->udc_data;
169         udelay(SUN3_DMA_DELAY);
170         
171         return ret;
172 }
173
174 static inline void sun3_udc_write(unsigned short val, unsigned char reg)
175 {
176         dregs->udc_addr = reg;
177         udelay(SUN3_DMA_DELAY);
178         dregs->udc_data = val;
179         udelay(SUN3_DMA_DELAY);
180 }
181
182 /*
183  * XXX: status debug
184  */
185 static struct Scsi_Host *default_instance;
186
187 /*
188  * Function : int sun3scsi_detect(struct scsi_host_template * tpnt)
189  *
190  * Purpose : initializes mac NCR5380 driver based on the
191  *      command line / compile time port and irq definitions.
192  *
193  * Inputs : tpnt - template for this SCSI adapter.
194  *
195  * Returns : 1 if a host adapter was found, 0 if not.
196  *
197  */
198  
199 int sun3scsi_detect(struct scsi_host_template * tpnt)
200 {
201         unsigned long ioaddr;
202         static int called = 0;
203         struct Scsi_Host *instance;
204
205         /* check that this machine has an onboard 5380 */
206         switch(idprom->id_machtype) {
207         case SM_SUN3|SM_3_50:
208         case SM_SUN3|SM_3_60:
209                 break;
210
211         default:
212                 return 0;
213         }
214
215         if(called)
216                 return 0;
217
218         tpnt->proc_name = "Sun3 5380 SCSI";
219
220         /* setup variables */
221         tpnt->can_queue =
222                 (setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
223         tpnt->cmd_per_lun =
224                 (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
225         tpnt->sg_tablesize = 
226                 (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
227
228         if (setup_hostid >= 0)
229                 tpnt->this_id = setup_hostid;
230         else {
231                 /* use 7 as default */
232                 tpnt->this_id = 7;
233         }
234
235         ioaddr = (unsigned long)ioremap(IOBASE_SUN3_SCSI, PAGE_SIZE);
236         sun3_scsi_regp = (unsigned char *)ioaddr;
237
238         dregs = (struct sun3_dma_regs *)(((unsigned char *)ioaddr) + 8);
239
240         if((udc_regs = dvma_malloc(sizeof(struct sun3_udc_regs)))
241            == NULL) {
242              printk("SUN3 Scsi couldn't allocate DVMA memory!\n");
243              return 0;
244         }
245 #ifdef OLDDMA
246         if((dmabuf = dvma_malloc_align(SUN3_DVMA_BUFSIZE, 0x10000)) == NULL) {
247              printk("SUN3 Scsi couldn't allocate DVMA memory!\n");
248              return 0;
249         }
250 #endif
251 #ifdef SUPPORT_TAGS
252         if (setup_use_tagged_queuing < 0)
253                 setup_use_tagged_queuing = USE_TAGGED_QUEUING;
254 #endif
255
256         instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
257         if(instance == NULL)
258                 return 0;
259                 
260         default_instance = instance;
261
262         instance->io_port = (unsigned long) ioaddr;
263         instance->irq = IRQ_SUN3_SCSI;
264
265         NCR5380_init(instance, 0);
266
267         instance->n_io_port = 32;
268
269         ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
270
271         if (request_irq(instance->irq, scsi_sun3_intr,
272                              0, "Sun3SCSI-5380", NULL)) {
273 #ifndef REAL_DMA
274                 printk("scsi%d: IRQ%d not free, interrupts disabled\n",
275                        instance->host_no, instance->irq);
276                 instance->irq = SCSI_IRQ_NONE;
277 #else
278                 printk("scsi%d: IRQ%d not free, bailing out\n",
279                        instance->host_no, instance->irq);
280                 return 0;
281 #endif
282         }
283         
284         printk("scsi%d: Sun3 5380 at port %lX irq", instance->host_no, instance->io_port);
285         if (instance->irq == SCSI_IRQ_NONE)
286                 printk ("s disabled");
287         else
288                 printk (" %d", instance->irq);
289         printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
290                instance->can_queue, instance->cmd_per_lun,
291                SUN3SCSI_PUBLIC_RELEASE);
292         printk("\nscsi%d:", instance->host_no);
293         NCR5380_print_options(instance);
294         printk("\n");
295
296         dregs->csr = 0;
297         udelay(SUN3_DMA_DELAY);
298         dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
299         udelay(SUN3_DMA_DELAY);
300         dregs->fifo_count = 0;
301
302         called = 1;
303
304 #ifdef RESET_BOOT
305         sun3_scsi_reset_boot(instance);
306 #endif
307
308         return 1;
309 }
310
311 int sun3scsi_release (struct Scsi_Host *shpnt)
312 {
313         if (shpnt->irq != SCSI_IRQ_NONE)
314                 free_irq (shpnt->irq, NULL);
315
316         iounmap((void *)sun3_scsi_regp);
317
318         return 0;
319 }
320
321 #ifdef RESET_BOOT
322 /*
323  * Our 'bus reset on boot' function
324  */
325
326 static void sun3_scsi_reset_boot(struct Scsi_Host *instance)
327 {
328         unsigned long end;
329
330         NCR5380_local_declare();
331         NCR5380_setup(instance);
332         
333         /*
334          * Do a SCSI reset to clean up the bus during initialization. No
335          * messing with the queues, interrupts, or locks necessary here.
336          */
337
338         printk( "Sun3 SCSI: resetting the SCSI bus..." );
339
340         /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */
341 //              sun3_disable_irq( IRQ_SUN3_SCSI );
342
343         /* get in phase */
344         NCR5380_write( TARGET_COMMAND_REG,
345                       PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
346
347         /* assert RST */
348         NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
349
350         /* The min. reset hold time is 25us, so 40us should be enough */
351         udelay( 50 );
352
353         /* reset RST and interrupt */
354         NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
355         NCR5380_read( RESET_PARITY_INTERRUPT_REG );
356
357         for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
358                 barrier();
359
360         /* switch on SCSI IRQ again */
361 //              sun3_enable_irq( IRQ_SUN3_SCSI );
362
363         printk( " done\n" );
364 }
365 #endif
366
367 const char * sun3scsi_info (struct Scsi_Host *spnt) {
368     return "";
369 }
370
371 // safe bits for the CSR
372 #define CSR_GOOD 0x060f
373
374 static irqreturn_t scsi_sun3_intr(int irq, void *dummy, struct pt_regs *fp)
375 {
376         unsigned short csr = dregs->csr;
377         int handled = 0;
378
379         if(csr & ~CSR_GOOD) {
380                 if(csr & CSR_DMA_BUSERR) {
381                         printk("scsi%d: bus error in dma\n", default_instance->host_no);
382                 }
383
384                 if(csr & CSR_DMA_CONFLICT) {
385                         printk("scsi%d: dma conflict\n", default_instance->host_no);
386                 }
387                 handled = 1;
388         }
389
390         if(csr & (CSR_SDB_INT | CSR_DMA_INT)) {
391                 NCR5380_intr(irq, dummy, fp);
392                 handled = 1;
393         }
394
395         return IRQ_RETVAL(handled);
396 }
397
398 /*
399  * Debug stuff - to be called on NMI, or sysrq key. Use at your own risk; 
400  * reentering NCR5380_print_status seems to have ugly side effects
401  */
402
403 /* this doesn't seem to get used at all -- sam */
404 #if 0
405 void sun3_sun3_debug (void)
406 {
407         unsigned long flags;
408         NCR5380_local_declare();
409
410         if (default_instance) {
411                         local_irq_save(flags);
412                         NCR5380_print_status(default_instance);
413                         local_irq_restore(flags);
414         }
415 }
416 #endif
417
418
419 /* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */
420 static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag)
421 {
422 #ifdef OLDDMA
423         if(write_flag) 
424                 memcpy(dmabuf, data, count);
425         else {
426                 sun3_dma_orig_addr = data;
427                 sun3_dma_orig_count = count;
428         }
429 #else
430         void *addr;
431
432         if(sun3_dma_orig_addr != NULL)
433                 dvma_unmap(sun3_dma_orig_addr);
434
435 //      addr = sun3_dvma_page((unsigned long)data, (unsigned long)dmabuf);
436         addr = (void *)dvma_map((unsigned long) data, count);
437                 
438         sun3_dma_orig_addr = addr;
439         sun3_dma_orig_count = count;
440 #endif
441         dregs->fifo_count = 0;
442         sun3_udc_write(UDC_RESET, UDC_CSR);
443         
444         /* reset fifo */
445         dregs->csr &= ~CSR_FIFO;
446         dregs->csr |= CSR_FIFO;
447         
448         /* set direction */
449         if(write_flag)
450                 dregs->csr |= CSR_SEND;
451         else
452                 dregs->csr &= ~CSR_SEND;
453         
454         /* byte count for fifo */
455         dregs->fifo_count = count;
456
457         sun3_udc_write(UDC_RESET, UDC_CSR);
458         
459         /* reset fifo */
460         dregs->csr &= ~CSR_FIFO;
461         dregs->csr |= CSR_FIFO;
462         
463         if(dregs->fifo_count != count) { 
464                 printk("scsi%d: fifo_mismatch %04x not %04x\n",
465                        default_instance->host_no, dregs->fifo_count,
466                        (unsigned int) count);
467                 NCR5380_print(default_instance);
468         }
469
470         /* setup udc */
471 #ifdef OLDDMA
472         udc_regs->addr_hi = ((dvma_vtob(dmabuf) & 0xff0000) >> 8);
473         udc_regs->addr_lo = (dvma_vtob(dmabuf) & 0xffff);
474 #else
475         udc_regs->addr_hi = (((unsigned long)(addr) & 0xff0000) >> 8);
476         udc_regs->addr_lo = ((unsigned long)(addr) & 0xffff);
477 #endif
478         udc_regs->count = count/2; /* count in words */
479         udc_regs->mode_hi = UDC_MODE_HIWORD;
480         if(write_flag) {
481                 if(count & 1)
482                         udc_regs->count++;
483                 udc_regs->mode_lo = UDC_MODE_LSEND;
484                 udc_regs->rsel = UDC_RSEL_SEND;
485         } else {
486                 udc_regs->mode_lo = UDC_MODE_LRECV;
487                 udc_regs->rsel = UDC_RSEL_RECV;
488         }
489         
490         /* announce location of regs block */
491         sun3_udc_write(((dvma_vtob(udc_regs) & 0xff0000) >> 8),
492                        UDC_CHN_HI); 
493
494         sun3_udc_write((dvma_vtob(udc_regs) & 0xffff), UDC_CHN_LO);
495
496         /* set dma master on */
497         sun3_udc_write(0xd, UDC_MODE);
498
499         /* interrupt enable */
500         sun3_udc_write(UDC_INT_ENABLE, UDC_CSR);
501         
502         return count;
503
504 }
505
506 static inline unsigned long sun3scsi_dma_count(struct Scsi_Host *instance)
507 {
508         unsigned short resid;
509
510         dregs->udc_addr = 0x32; 
511         udelay(SUN3_DMA_DELAY);
512         resid = dregs->udc_data;
513         udelay(SUN3_DMA_DELAY);
514         resid *= 2;
515
516         return (unsigned long) resid;
517 }
518
519 static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance)
520 {
521         return last_residual;
522 }
523
524 static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted, Scsi_Cmnd *cmd,
525                                     int write_flag)
526 {
527         if(cmd->request->flags & REQ_CMD)
528                 return wanted;
529         else
530                 return 0;
531 }
532
533 static inline int sun3scsi_dma_start(unsigned long count, unsigned char *data)
534 {
535
536     sun3_udc_write(UDC_CHN_START, UDC_CSR);
537     
538     return 0;
539 }
540
541 /* clean up after our dma is done */
542 static int sun3scsi_dma_finish(int write_flag)
543 {
544         unsigned short count;
545         unsigned short fifo;
546         int ret = 0;
547         
548         sun3_dma_active = 0;
549 #if 1
550         // check to empty the fifo on a read
551         if(!write_flag) {
552                 int tmo = 20000; /* .2 sec */
553                 
554                 while(1) {
555                         if(dregs->csr & CSR_FIFO_EMPTY)
556                                 break;
557
558                         if(--tmo <= 0) {
559                                 printk("sun3scsi: fifo failed to empty!\n");
560                                 return 1;
561                         }
562                         udelay(10);
563                 }
564         }
565                 
566 #endif
567
568         count = sun3scsi_dma_count(default_instance);
569 #ifdef OLDDMA
570
571         /* if we've finished a read, copy out the data we read */
572         if(sun3_dma_orig_addr) {
573                 /* check for residual bytes after dma end */
574                 if(count && (NCR5380_read(BUS_AND_STATUS_REG) &
575                              (BASR_PHASE_MATCH | BASR_ACK))) {
576                         printk("scsi%d: sun3_scsi_finish: read overrun baby... ", default_instance->host_no);
577                         printk("basr now %02x\n", NCR5380_read(BUS_AND_STATUS_REG));
578                         ret = count;
579                 }
580                 
581                 /* copy in what we dma'd no matter what */
582                 memcpy(sun3_dma_orig_addr, dmabuf, sun3_dma_orig_count);
583                 sun3_dma_orig_addr = NULL;
584
585         }
586 #else
587
588         fifo = dregs->fifo_count;
589         last_residual = fifo;
590
591         /* empty bytes from the fifo which didn't make it */
592         if((!write_flag) && (count - fifo) == 2) {
593                 unsigned short data;
594                 unsigned char *vaddr;
595
596                 data = dregs->fifo_data;
597                 vaddr = (unsigned char *)dvma_btov(sun3_dma_orig_addr);
598                 
599                 vaddr += (sun3_dma_orig_count - fifo);
600
601                 vaddr[-2] = (data & 0xff00) >> 8;
602                 vaddr[-1] = (data & 0xff);
603         }
604
605         dvma_unmap(sun3_dma_orig_addr);
606         sun3_dma_orig_addr = NULL;
607 #endif
608         sun3_udc_write(UDC_RESET, UDC_CSR);
609         dregs->fifo_count = 0;
610         dregs->csr &= ~CSR_SEND;
611
612         /* reset fifo */
613         dregs->csr &= ~CSR_FIFO;
614         dregs->csr |= CSR_FIFO;
615         
616         sun3_dma_setup_done = NULL;
617
618         return ret;
619
620 }
621         
622 #include "sun3_NCR5380.c"
623
624 static struct scsi_host_template driver_template = {
625         .name                   = SUN3_SCSI_NAME,
626         .detect                 = sun3scsi_detect,
627         .release                = sun3scsi_release,
628         .info                   = sun3scsi_info,
629         .queuecommand           = sun3scsi_queue_command,
630         .eh_abort_handler       = sun3scsi_abort,
631         .eh_bus_reset_handler   = sun3scsi_bus_reset,
632         .can_queue              = CAN_QUEUE,
633         .this_id                = 7,
634         .sg_tablesize           = SG_TABLESIZE,
635         .cmd_per_lun            = CMD_PER_LUN,
636         .use_clustering         = DISABLE_CLUSTERING
637 };
638
639
640 #include "scsi_module.c"
641
642 MODULE_LICENSE("GPL");