git.oblomov.eu Git - linux-2.6/blob - arch/arm/mach-omap2/clock.c

   1 /*
   2  *  linux/arch/arm/mach-omap2/clock.c
   3  *
   4  *  Copyright (C) 2005 Texas Instruments Inc.
   5  *  Richard Woodruff <r-woodruff2@ti.com>
   6  *  Created for OMAP2.
   7  *
   8  *  Cleaned up and modified to use omap shared clock framework by
   9  *  Tony Lindgren <tony@atomide.com>
  10  *
  11  *  Based on omap1 clock.c, Copyright (C) 2004 - 2005 Nokia corporation
  12  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License version 2 as
  16  * published by the Free Software Foundation.
  17  */
  18 #include <linux/module.h>
  19 #include <linux/kernel.h>
  20 #include <linux/device.h>
  21 #include <linux/list.h>
  22 #include <linux/errno.h>
  23 #include <linux/delay.h>
  24 #include <linux/clk.h>
  25
  26 #include <asm/io.h>
  27
  28 #include <asm/arch/clock.h>
  29 #include <asm/arch/sram.h>
  30
  31 #include "prcm-regs.h"
  32 #include "memory.h"
  33 #include "clock.h"
  34
  35 #undef DEBUG
  36
  37 //#define DOWN_VARIABLE_DPLL 1                  /* Experimental */
  38
  39 static struct prcm_config *curr_prcm_set;
  40 static u32 curr_perf_level = PRCM_FULL_SPEED;
  41 static struct clk *vclk;
  42 static struct clk *sclk;
  43
  44 /*-------------------------------------------------------------------------
  45  * Omap2 specific clock functions
  46  *-------------------------------------------------------------------------*/
  47
  48 /* Recalculate SYST_CLK */
  49 static void omap2_sys_clk_recalc(struct clk * clk)
  50 {
  51         u32 div = PRCM_CLKSRC_CTRL;
  52         div &= (1 << 7) | (1 << 6);     /* Test if ext clk divided by 1 or 2 */
  53         div >>= clk->rate_offset;
  54         clk->rate = (clk->parent->rate / div);
  55         propagate_rate(clk);
  56 }
  57
  58 static u32 omap2_get_dpll_rate(struct clk * tclk)
  59 {
  60         long long dpll_clk;
  61         int dpll_mult, dpll_div, amult;
  62
  63         dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff;    /* 10 bits */
  64         dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f;        /* 4 bits */
  65         dpll_clk = (long long)tclk->parent->rate * dpll_mult;
  66         do_div(dpll_clk, dpll_div + 1);
  67         amult = CM_CLKSEL2_PLL & 0x3;
  68         dpll_clk *= amult;
  69
  70         return dpll_clk;
  71 }
  72
  73 static void omap2_followparent_recalc(struct clk *clk)
  74 {
  75         followparent_recalc(clk);
  76 }
  77
  78 static void omap2_propagate_rate(struct clk * clk)
  79 {
  80         if (!(clk->flags & RATE_FIXED))
  81                 clk->rate = clk->parent->rate;
  82
  83         propagate_rate(clk);
  84 }
  85
  86 static void omap2_set_osc_ck(int enable)
  87 {
  88         if (enable)
  89                 PRCM_CLKSRC_CTRL &= ~(0x3 << 3);
  90         else
  91                 PRCM_CLKSRC_CTRL |= 0x3 << 3;
  92 }
  93
  94 /* Enable an APLL if off */
  95 static void omap2_clk_fixed_enable(struct clk *clk)
  96 {
  97         u32 cval, i=0;
  98
  99         if (clk->enable_bit == 0xff)                    /* Parent will do it */
 100                 return;
 101
 102         cval = CM_CLKEN_PLL;
 103
 104         if ((cval & (0x3 << clk->enable_bit)) == (0x3 << clk->enable_bit))
 105                 return;
 106
 107         cval &= ~(0x3 << clk->enable_bit);
 108         cval |= (0x3 << clk->enable_bit);
 109         CM_CLKEN_PLL = cval;
 110
 111         if (clk == &apll96_ck)
 112                 cval = (1 << 8);
 113         else if (clk == &apll54_ck)
 114                 cval = (1 << 6);
 115
 116         while (!(CM_IDLEST_CKGEN & cval)) {             /* Wait for lock */
 117                 ++i;
 118                 udelay(1);
 119                 if (i == 100000) {
 120                         printk(KERN_ERR "Clock %s didn't lock\n", clk->name);
 121                         break;
 122                 }
 123         }
 124 }
 125
 126 static void omap2_clk_wait_ready(struct clk *clk)
 127 {
 128         unsigned long reg, other_reg, st_reg;
 129         u32 bit;
 130         int i;
 131
 132         reg = (unsigned long) clk->enable_reg;
 133         if (reg == (unsigned long) &CM_FCLKEN1_CORE ||
 134             reg == (unsigned long) &CM_FCLKEN2_CORE)
 135                 other_reg = (reg & ~0xf0) | 0x10;
 136         else if (reg == (unsigned long) &CM_ICLKEN1_CORE ||
 137                  reg == (unsigned long) &CM_ICLKEN2_CORE)
 138                 other_reg = (reg & ~0xf0) | 0x00;
 139         else
 140                 return;
 141
 142         /* No check for DSS or cam clocks */
 143         if ((reg & 0x0f) == 0) {
 144                 if (clk->enable_bit <= 1 || clk->enable_bit == 31)
 145                         return;
 146         }
 147
 148         /* Check if both functional and interface clocks
 149          * are running. */
 150         bit = 1 << clk->enable_bit;
 151         if (!(__raw_readl(other_reg) & bit))
 152                 return;
 153         st_reg = (other_reg & ~0xf0) | 0x20;
 154         i = 0;
 155         while (!(__raw_readl(st_reg) & bit)) {
 156                 i++;
 157                 if (i == 100000) {
 158                         printk(KERN_ERR "Timeout enabling clock %s\n", clk->name);
 159                         break;
 160                 }
 161         }
 162         if (i)
 163                 pr_debug("Clock %s stable after %d loops\n", clk->name, i);
 164 }
 165
 166 /* Enables clock without considering parent dependencies or use count
 167  * REVISIT: Maybe change this to use clk->enable like on omap1?
 168  */
 169 static int _omap2_clk_enable(struct clk * clk)
 170 {
 171         u32 regval32;
 172
 173         if (clk->flags & ALWAYS_ENABLED)
 174                 return 0;
 175
 176         if (unlikely(clk == &osc_ck)) {
 177                 omap2_set_osc_ck(1);
 178                 return 0;
 179         }
 180
 181         if (unlikely(clk->enable_reg == 0)) {
 182                 printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
 183                        clk->name);
 184                 return 0;
 185         }
 186
 187         if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
 188                 omap2_clk_fixed_enable(clk);
 189                 return 0;
 190         }
 191
 192         regval32 = __raw_readl(clk->enable_reg);
 193         regval32 |= (1 << clk->enable_bit);
 194         __raw_writel(regval32, clk->enable_reg);
 195         wmb();
 196
 197         omap2_clk_wait_ready(clk);
 198
 199         return 0;
 200 }
 201
 202 /* Stop APLL */
 203 static void omap2_clk_fixed_disable(struct clk *clk)
 204 {
 205         u32 cval;
 206
 207         if(clk->enable_bit == 0xff)             /* let parent off do it */
 208                 return;
 209
 210         cval = CM_CLKEN_PLL;
 211         cval &= ~(0x3 << clk->enable_bit);
 212         CM_CLKEN_PLL = cval;
 213 }
 214
 215 /* Disables clock without considering parent dependencies or use count */
 216 static void _omap2_clk_disable(struct clk *clk)
 217 {
 218         u32 regval32;
 219
 220         if (unlikely(clk == &osc_ck)) {
 221                 omap2_set_osc_ck(0);
 222                 return;
 223         }
 224
 225         if (clk->enable_reg == 0)
 226                 return;
 227
 228         if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
 229                 omap2_clk_fixed_disable(clk);
 230                 return;
 231         }
 232
 233         regval32 = __raw_readl(clk->enable_reg);
 234         regval32 &= ~(1 << clk->enable_bit);
 235         __raw_writel(regval32, clk->enable_reg);
 236         wmb();
 237 }
 238
 239 static int omap2_clk_enable(struct clk *clk)
 240 {
 241         int ret = 0;
 242
 243         if (clk->usecount++ == 0) {
 244                 if (likely((u32)clk->parent))
 245                         ret = omap2_clk_enable(clk->parent);
 246
 247                 if (unlikely(ret != 0)) {
 248                         clk->usecount--;
 249                         return ret;
 250                 }
 251
 252                 ret = _omap2_clk_enable(clk);
 253
 254                 if (unlikely(ret != 0) && clk->parent) {
 255                         omap2_clk_disable(clk->parent);
 256                         clk->usecount--;
 257                 }
 258         }
 259
 260         return ret;
 261 }
 262
 263 static void omap2_clk_disable(struct clk *clk)
 264 {
 265         if (clk->usecount > 0 && !(--clk->usecount)) {
 266                 _omap2_clk_disable(clk);
 267                 if (likely((u32)clk->parent))
 268                         omap2_clk_disable(clk->parent);
 269         }
 270 }
 271
 272 /*
 273  * Uses the current prcm set to tell if a rate is valid.
 274  * You can go slower, but not faster within a given rate set.
 275  */
 276 static u32 omap2_dpll_round_rate(unsigned long target_rate)
 277 {
 278         u32 high, low;
 279
 280         if ((CM_CLKSEL2_PLL & 0x3) == 1) {      /* DPLL clockout */
 281                 high = curr_prcm_set->dpll_speed * 2;
 282                 low = curr_prcm_set->dpll_speed;
 283         } else {                                /* DPLL clockout x 2 */
 284                 high = curr_prcm_set->dpll_speed;
 285                 low = curr_prcm_set->dpll_speed / 2;
 286         }
 287
 288 #ifdef DOWN_VARIABLE_DPLL
 289         if (target_rate > high)
 290                 return high;
 291         else
 292                 return target_rate;
 293 #else
 294         if (target_rate > low)
 295                 return high;
 296         else
 297                 return low;
 298 #endif
 299
 300 }
 301
 302 /*
 303  * Used for clocks that are part of CLKSEL_xyz governed clocks.
 304  * REVISIT: Maybe change to use clk->enable() functions like on omap1?
 305  */
 306 static void omap2_clksel_recalc(struct clk * clk)
 307 {
 308         u32 fixed = 0, div = 0;
 309
 310         if (clk == &dpll_ck) {
 311                 clk->rate = omap2_get_dpll_rate(clk);
 312                 fixed = 1;
 313                 div = 0;
 314         }
 315
 316         if (clk == &iva1_mpu_int_ifck) {
 317                 div = 2;
 318                 fixed = 1;
 319         }
 320
 321         if ((clk == &dss1_fck) && ((CM_CLKSEL1_CORE & (0x1f << 8)) == 0)) {
 322                 clk->rate = sys_ck.rate;
 323                 return;
 324         }
 325
 326         if (!fixed) {
 327                 div = omap2_clksel_get_divisor(clk);
 328                 if (div == 0)
 329                         return;
 330         }
 331
 332         if (div != 0) {
 333                 if (unlikely(clk->rate == clk->parent->rate / div))
 334                         return;
 335                 clk->rate = clk->parent->rate / div;
 336         }
 337
 338         if (unlikely(clk->flags & RATE_PROPAGATES))
 339                 propagate_rate(clk);
 340 }
 341
 342 /*
 343  * Finds best divider value in an array based on the source and target
 344  * rates. The divider array must be sorted with smallest divider first.
 345  */
 346 static inline u32 omap2_divider_from_table(u32 size, u32 *div_array,
 347                                            u32 src_rate, u32 tgt_rate)
 348 {
 349         int i, test_rate;
 350
 351         if (div_array == NULL)
 352                 return ~1;
 353
 354         for (i=0; i < size; i++) {
 355                 test_rate = src_rate / *div_array;
 356                 if (test_rate <= tgt_rate)
 357                         return *div_array;
 358                 ++div_array;
 359         }
 360
 361         return ~0;      /* No acceptable divider */
 362 }
 363
 364 /*
 365  * Find divisor for the given clock and target rate.
 366  *
 367  * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
 368  * they are only settable as part of virtual_prcm set.
 369  */
 370 static u32 omap2_clksel_round_rate(struct clk *tclk, u32 target_rate,
 371         u32 *new_div)
 372 {
 373         u32 gfx_div[] = {2, 3, 4};
 374         u32 sysclkout_div[] = {1, 2, 4, 8, 16};
 375         u32 dss1_div[] = {1, 2, 3, 4, 5, 6, 8, 9, 12, 16};
 376         u32 vylnq_div[] = {1, 2, 3, 4, 6, 8, 9, 12, 16, 18};
 377         u32 best_div = ~0, asize = 0;
 378         u32 *div_array = NULL;
 379
 380         switch (tclk->flags & SRC_RATE_SEL_MASK) {
 381         case CM_GFX_SEL1:
 382                 asize = 3;
 383                 div_array = gfx_div;
 384                 break;
 385         case CM_PLL_SEL1:
 386                 return omap2_dpll_round_rate(target_rate);
 387         case CM_SYSCLKOUT_SEL1:
 388                 asize = 5;
 389                 div_array = sysclkout_div;
 390                 break;
 391         case CM_CORE_SEL1:
 392                 if(tclk == &dss1_fck){
 393                         if(tclk->parent == &core_ck){
 394                                 asize = 10;
 395                                 div_array = dss1_div;
 396                         } else {
 397                                 *new_div = 0; /* fixed clk */
 398                                 return(tclk->parent->rate);
 399                         }
 400                 } else if((tclk == &vlynq_fck) && cpu_is_omap2420()){
 401                         if(tclk->parent == &core_ck){
 402                                 asize = 10;
 403                                 div_array = vylnq_div;
 404                         } else {
 405                                 *new_div = 0; /* fixed clk */
 406                                 return(tclk->parent->rate);
 407                         }
 408                 }
 409                 break;
 410         }
 411
 412         best_div = omap2_divider_from_table(asize, div_array,
 413          tclk->parent->rate, target_rate);
 414         if (best_div == ~0){
 415                 *new_div = 1;
 416                 return best_div; /* signal error */
 417         }
 418
 419         *new_div = best_div;
 420         return (tclk->parent->rate / best_div);
 421 }
 422
 423 /* Given a clock and a rate apply a clock specific rounding function */
 424 static long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
 425 {
 426         u32 new_div = 0;
 427         int valid_rate;
 428
 429         if (clk->flags & RATE_FIXED)
 430                 return clk->rate;
 431
 432         if (clk->flags & RATE_CKCTL) {
 433                 valid_rate = omap2_clksel_round_rate(clk, rate, &new_div);
 434                 return valid_rate;
 435         }
 436
 437         if (clk->round_rate != 0)
 438                 return clk->round_rate(clk, rate);
 439
 440         return clk->rate;
 441 }
 442
 443 /*
 444  * Check the DLL lock state, and return tue if running in unlock mode.
 445  * This is needed to compenste for the shifted DLL value in unlock mode.
 446  */
 447 static u32 omap2_dll_force_needed(void)
 448 {
 449         u32 dll_state = SDRC_DLLA_CTRL;         /* dlla and dllb are a set */
 450
 451         if ((dll_state & (1 << 2)) == (1 << 2))
 452                 return 1;
 453         else
 454                 return 0;
 455 }
 456
 457 static u32 omap2_reprogram_sdrc(u32 level, u32 force)
 458 {
 459         u32 slow_dll_ctrl, fast_dll_ctrl, m_type;
 460         u32 prev = curr_perf_level, flags;
 461
 462         if ((curr_perf_level == level) && !force)
 463                 return prev;
 464
 465         m_type = omap2_memory_get_type();
 466         slow_dll_ctrl = omap2_memory_get_slow_dll_ctrl();
 467         fast_dll_ctrl = omap2_memory_get_fast_dll_ctrl();
 468
 469         if (level == PRCM_HALF_SPEED) {
 470                 local_irq_save(flags);
 471                 PRCM_VOLTSETUP = 0xffff;
 472                 omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED,
 473                                           slow_dll_ctrl, m_type);
 474                 curr_perf_level = PRCM_HALF_SPEED;
 475                 local_irq_restore(flags);
 476         }
 477         if (level == PRCM_FULL_SPEED) {
 478                 local_irq_save(flags);
 479                 PRCM_VOLTSETUP = 0xffff;
 480                 omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED,
 481                                           fast_dll_ctrl, m_type);
 482                 curr_perf_level = PRCM_FULL_SPEED;
 483                 local_irq_restore(flags);
 484         }
 485
 486         return prev;
 487 }
 488
 489 static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate)
 490 {
 491         u32 flags, cur_rate, low, mult, div, valid_rate, done_rate;
 492         u32 bypass = 0;
 493         struct prcm_config tmpset;
 494         int ret = -EINVAL;
 495
 496         local_irq_save(flags);
 497         cur_rate = omap2_get_dpll_rate(&dpll_ck);
 498         mult = CM_CLKSEL2_PLL & 0x3;
 499
 500         if ((rate == (cur_rate / 2)) && (mult == 2)) {
 501                 omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
 502         } else if ((rate == (cur_rate * 2)) && (mult == 1)) {
 503                 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
 504         } else if (rate != cur_rate) {
 505                 valid_rate = omap2_dpll_round_rate(rate);
 506                 if (valid_rate != rate)
 507                         goto dpll_exit;
 508
 509                 if ((CM_CLKSEL2_PLL & 0x3) == 1)
 510                         low = curr_prcm_set->dpll_speed;
 511                 else
 512                         low = curr_prcm_set->dpll_speed / 2;
 513
 514                 tmpset.cm_clksel1_pll = CM_CLKSEL1_PLL;
 515                 tmpset.cm_clksel1_pll &= ~(0x3FFF << 8);
 516                 div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
 517                 tmpset.cm_clksel2_pll = CM_CLKSEL2_PLL;
 518                 tmpset.cm_clksel2_pll &= ~0x3;
 519                 if (rate > low) {
 520                         tmpset.cm_clksel2_pll |= 0x2;
 521                         mult = ((rate / 2) / 1000000);
 522                         done_rate = PRCM_FULL_SPEED;
 523                 } else {
 524                         tmpset.cm_clksel2_pll |= 0x1;
 525                         mult = (rate / 1000000);
 526                         done_rate = PRCM_HALF_SPEED;
 527                 }
 528                 tmpset.cm_clksel1_pll |= ((div << 8) | (mult << 12));
 529
 530                 /* Worst case */
 531                 tmpset.base_sdrc_rfr = V24XX_SDRC_RFR_CTRL_BYPASS;
 532
 533                 if (rate == curr_prcm_set->xtal_speed)  /* If asking for 1-1 */
 534                         bypass = 1;
 535
 536                 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); /* For init_mem */
 537
 538                 /* Force dll lock mode */
 539                 omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
 540                                bypass);
 541
 542                 /* Errata: ret dll entry state */
 543                 omap2_init_memory_params(omap2_dll_force_needed());
 544                 omap2_reprogram_sdrc(done_rate, 0);
 545         }
 546         omap2_clksel_recalc(&dpll_ck);
 547         ret = 0;
 548
 549 dpll_exit:
 550         local_irq_restore(flags);
 551         return(ret);
 552 }
 553
 554 /* Just return the MPU speed */
 555 static void omap2_mpu_recalc(struct clk * clk)
 556 {
 557         clk->rate = curr_prcm_set->mpu_speed;
 558 }
 559
 560 /*
 561  * Look for a rate equal or less than the target rate given a configuration set.
 562  *
 563  * What's not entirely clear is "which" field represents the key field.
 564  * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
 565  * just uses the ARM rates.
 566  */
 567 static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate)
 568 {
 569         struct prcm_config * ptr;
 570         long highest_rate;
 571
 572         if (clk != &virt_prcm_set)
 573                 return -EINVAL;
 574
 575         highest_rate = -EINVAL;
 576
 577         for (ptr = rate_table; ptr->mpu_speed; ptr++) {
 578                 if (ptr->xtal_speed != sys_ck.rate)
 579                         continue;
 580
 581                 highest_rate = ptr->mpu_speed;
 582
 583                 /* Can check only after xtal frequency check */
 584                 if (ptr->mpu_speed <= rate)
 585                         break;
 586         }
 587         return highest_rate;
 588 }
 589
 590 /*
 591  * omap2_convert_field_to_div() - turn field value into integer divider
 592  */
 593 static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val)
 594 {
 595         u32 i;
 596         u32 clkout_array[] = {1, 2, 4, 8, 16};
 597
 598         if ((div_sel & SRC_RATE_SEL_MASK) == CM_SYSCLKOUT_SEL1) {
 599                 for (i = 0; i < 5; i++) {
 600                         if (field_val == i)
 601                                 return clkout_array[i];
 602                 }
 603                 return ~0;
 604         } else
 605                 return field_val;
 606 }
 607
 608 /*
 609  * Returns the CLKSEL divider register value
 610  * REVISIT: This should be cleaned up to work nicely with void __iomem *
 611  */
 612 static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask,
 613                             struct clk *clk)
 614 {
 615         int ret = ~0;
 616         u32 reg_val, div_off;
 617         u32 div_addr = 0;
 618         u32 mask = ~0;
 619
 620         div_off = clk->rate_offset;
 621
 622         switch ((*div_sel & SRC_RATE_SEL_MASK)) {
 623         case CM_MPU_SEL1:
 624                 div_addr = (u32)&CM_CLKSEL_MPU;
 625                 mask = 0x1f;
 626                 break;
 627         case CM_DSP_SEL1:
 628                 div_addr = (u32)&CM_CLKSEL_DSP;
 629                 if (cpu_is_omap2420()) {
 630                         if ((div_off == 0) || (div_off == 8))
 631                                 mask = 0x1f;
 632                         else if (div_off == 5)
 633                                 mask = 0x3;
 634                 } else if (cpu_is_omap2430()) {
 635                         if (div_off == 0)
 636                                 mask = 0x1f;
 637                         else if (div_off == 5)
 638                                 mask = 0x3;
 639                 }
 640                 break;
 641         case CM_GFX_SEL1:
 642                 div_addr = (u32)&CM_CLKSEL_GFX;
 643                 if (div_off == 0)
 644                         mask = 0x7;
 645                 break;
 646         case CM_MODEM_SEL1:
 647                 div_addr = (u32)&CM_CLKSEL_MDM;
 648                 if (div_off == 0)
 649                         mask = 0xf;
 650                 break;
 651         case CM_SYSCLKOUT_SEL1:
 652                 div_addr = (u32)&PRCM_CLKOUT_CTRL;
 653                 if ((div_off == 3) || (div_off = 11))
 654                         mask= 0x3;
 655                 break;
 656         case CM_CORE_SEL1:
 657                 div_addr = (u32)&CM_CLKSEL1_CORE;
 658                 switch (div_off) {
 659                 case 0:                                 /* l3 */
 660                 case 8:                                 /* dss1 */
 661                 case 15:                                /* vylnc-2420 */
 662                 case 20:                                /* ssi */
 663                         mask = 0x1f; break;
 664                 case 5:                                 /* l4 */
 665                         mask = 0x3; break;
 666                 case 13:                                /* dss2 */
 667                         mask = 0x1; break;
 668                 case 25:                                /* usb */
 669                         mask = 0x7; break;
 670                 }
 671         }
 672
 673         *field_mask = mask;
 674
 675         if (unlikely(mask == ~0))
 676                 div_addr = 0;
 677
 678         *div_sel = div_addr;
 679
 680         if (unlikely(div_addr == 0))
 681                 return ret;
 682
 683         /* Isolate field */
 684         reg_val = __raw_readl((void __iomem *)div_addr) & (mask << div_off);
 685
 686         /* Normalize back to divider value */
 687         reg_val >>= div_off;
 688
 689         return reg_val;
 690 }
 691
 692 /*
 693  * Return divider to be applied to parent clock.
 694  * Return 0 on error.
 695  */
 696 static u32 omap2_clksel_get_divisor(struct clk *clk)
 697 {
 698         int ret = 0;
 699         u32 div, div_sel, div_off, field_mask, field_val;
 700
 701         /* isolate control register */
 702         div_sel = (SRC_RATE_SEL_MASK & clk->flags);
 703
 704         div_off = clk->rate_offset;
 705         field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
 706         if (div_sel == 0)
 707                 return ret;
 708
 709         div_sel = (SRC_RATE_SEL_MASK & clk->flags);
 710         div = omap2_clksel_to_divisor(div_sel, field_val);
 711
 712         return div;
 713 }
 714
 715 /* Set the clock rate for a clock source */
 716 static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 717
 718 {
 719         int ret = -EINVAL;
 720         void __iomem * reg;
 721         u32 div_sel, div_off, field_mask, field_val, reg_val, validrate;
 722         u32 new_div = 0;
 723
 724         if (!(clk->flags & CONFIG_PARTICIPANT) && (clk->flags & RATE_CKCTL)) {
 725                 if (clk == &dpll_ck)
 726                         return omap2_reprogram_dpll(clk, rate);
 727
 728                 /* Isolate control register */
 729                 div_sel = (SRC_RATE_SEL_MASK & clk->flags);
 730                 div_off = clk->rate_offset;
 731
 732                 validrate = omap2_clksel_round_rate(clk, rate, &new_div);
 733                 if (validrate != rate)
 734                         return(ret);
 735
 736                 field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
 737                 if (div_sel == 0)
 738                         return ret;
 739
 740                 if (clk->flags & CM_SYSCLKOUT_SEL1) {
 741                         switch (new_div) {
 742                         case 16:
 743                                 field_val = 4;
 744                                 break;
 745                         case 8:
 746                                 field_val = 3;
 747                                 break;
 748                         case 4:
 749                                 field_val = 2;
 750                                 break;
 751                         case 2:
 752                                 field_val = 1;
 753                                 break;
 754                         case 1:
 755                                 field_val = 0;
 756                                 break;
 757                         }
 758                 } else
 759                         field_val = new_div;
 760
 761                 reg = (void __iomem *)div_sel;
 762
 763                 reg_val = __raw_readl(reg);
 764                 reg_val &= ~(field_mask << div_off);
 765                 reg_val |= (field_val << div_off);
 766                 __raw_writel(reg_val, reg);
 767                 wmb();
 768                 clk->rate = clk->parent->rate / field_val;
 769
 770                 if (clk->flags & DELAYED_APP) {
 771                         __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
 772                         wmb();
 773                 }
 774                 ret = 0;
 775         } else if (clk->set_rate != 0)
 776                 ret = clk->set_rate(clk, rate);
 777
 778         if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
 779                 propagate_rate(clk);
 780
 781         return ret;
 782 }
 783
 784 /* Converts encoded control register address into a full address */
 785 static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
 786                                struct clk *src_clk, u32 *field_mask)
 787 {
 788         u32 val = ~0, src_reg_addr = 0, mask = 0;
 789
 790         /* Find target control register.*/
 791         switch ((*type_to_addr & SRC_RATE_SEL_MASK)) {
 792         case CM_CORE_SEL1:
 793                 src_reg_addr = (u32)&CM_CLKSEL1_CORE;
 794                 if (reg_offset == 13) {                 /* DSS2_fclk */
 795                         mask = 0x1;
 796                         if (src_clk == &sys_ck)
 797                                 val = 0;
 798                         if (src_clk == &func_48m_ck)
 799                                 val = 1;
 800                 } else if (reg_offset == 8) {           /* DSS1_fclk */
 801                         mask = 0x1f;
 802                         if (src_clk == &sys_ck)
 803                                 val = 0;
 804                         else if (src_clk == &core_ck)   /* divided clock */
 805                                 val = 0x10;             /* rate needs fixing */
 806                 } else if ((reg_offset == 15) && cpu_is_omap2420()){ /*vlnyq*/
 807                         mask = 0x1F;
 808                         if(src_clk == &func_96m_ck)
 809                                 val = 0;
 810                         else if (src_clk == &core_ck)
 811                                 val = 0x10;
 812                 }
 813                 break;
 814         case CM_CORE_SEL2:
 815                 src_reg_addr = (u32)&CM_CLKSEL2_CORE;
 816                 mask = 0x3;
 817                 if (src_clk == &func_32k_ck)
 818                         val = 0x0;
 819                 if (src_clk == &sys_ck)
 820                         val = 0x1;
 821                 if (src_clk == &alt_ck)
 822                         val = 0x2;
 823                 break;
 824         case CM_WKUP_SEL1:
 825                 src_reg_addr = (u32)&CM_CLKSEL_WKUP;
 826                 mask = 0x3;
 827                 if (src_clk == &func_32k_ck)
 828                         val = 0x0;
 829                 if (src_clk == &sys_ck)
 830                         val = 0x1;
 831                 if (src_clk == &alt_ck)
 832                         val = 0x2;
 833                 break;
 834         case CM_PLL_SEL1:
 835                 src_reg_addr = (u32)&CM_CLKSEL1_PLL;
 836                 mask = 0x1;
 837                 if (reg_offset == 0x3) {
 838                         if (src_clk == &apll96_ck)
 839                                 val = 0;
 840                         if (src_clk == &alt_ck)
 841                                 val = 1;
 842                 }
 843                 else if (reg_offset == 0x5) {
 844                         if (src_clk == &apll54_ck)
 845                                 val = 0;
 846                         if (src_clk == &alt_ck)
 847                                 val = 1;
 848                 }
 849                 break;
 850         case CM_PLL_SEL2:
 851                 src_reg_addr = (u32)&CM_CLKSEL2_PLL;
 852                 mask = 0x3;
 853                 if (src_clk == &func_32k_ck)
 854                         val = 0x0;
 855                 if (src_clk == &dpll_ck)
 856                         val = 0x2;
 857                 break;
 858         case CM_SYSCLKOUT_SEL1:
 859                 src_reg_addr = (u32)&PRCM_CLKOUT_CTRL;
 860                 mask = 0x3;
 861                 if (src_clk == &dpll_ck)
 862                         val = 0;
 863                 if (src_clk == &sys_ck)
 864                         val = 1;
 865                 if (src_clk == &func_96m_ck)
 866                         val = 2;
 867                 if (src_clk == &func_54m_ck)
 868                         val = 3;
 869                 break;
 870         }
 871
 872         if (val == ~0)                  /* Catch errors in offset */
 873                 *type_to_addr = 0;
 874         else
 875                 *type_to_addr = src_reg_addr;
 876         *field_mask = mask;
 877
 878         return val;
 879 }
 880
 881 static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 882 {
 883         void __iomem * reg;
 884         u32 src_sel, src_off, field_val, field_mask, reg_val, rate;
 885         int ret = -EINVAL;
 886
 887         if (unlikely(clk->flags & CONFIG_PARTICIPANT))
 888                 return ret;
 889
 890         if (clk->flags & SRC_SEL_MASK) {        /* On-chip SEL collection */
 891                 src_sel = (SRC_RATE_SEL_MASK & clk->flags);
 892                 src_off = clk->src_offset;
 893
 894                 if (src_sel == 0)
 895                         goto set_parent_error;
 896
 897                 field_val = omap2_get_src_field(&src_sel, src_off, new_parent,
 898                                                 &field_mask);
 899
 900                 reg = (void __iomem *)src_sel;
 901
 902                 if (clk->usecount > 0)
 903                         _omap2_clk_disable(clk);
 904
 905                 /* Set new source value (previous dividers if any in effect) */
 906                 reg_val = __raw_readl(reg) & ~(field_mask << src_off);
 907                 reg_val |= (field_val << src_off);
 908                 __raw_writel(reg_val, reg);
 909                 wmb();
 910
 911                 if (clk->flags & DELAYED_APP) {
 912                         __raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
 913                         wmb();
 914                 }
 915                 if (clk->usecount > 0)
 916                         _omap2_clk_enable(clk);
 917
 918                 clk->parent = new_parent;
 919
 920                 /* SRC_RATE_SEL_MASK clocks follow their parents rates.*/
 921                 if ((new_parent == &core_ck) && (clk == &dss1_fck))
 922                         clk->rate = new_parent->rate / 0x10;
 923                 else
 924                         clk->rate = new_parent->rate;
 925
 926                 if (unlikely(clk->flags & RATE_PROPAGATES))
 927                         propagate_rate(clk);
 928
 929                 return 0;
 930         } else {
 931                 clk->parent = new_parent;
 932                 rate = new_parent->rate;
 933                 omap2_clk_set_rate(clk, rate);
 934                 ret = 0;
 935         }
 936
 937  set_parent_error:
 938         return ret;
 939 }
 940
 941 /* Sets basic clocks based on the specified rate */
 942 static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
 943 {
 944         u32 flags, cur_rate, done_rate, bypass = 0;
 945         u8 cpu_mask = 0;
 946         struct prcm_config *prcm;
 947         unsigned long found_speed = 0;
 948
 949         if (clk != &virt_prcm_set)
 950                 return -EINVAL;
 951
 952         /* FIXME: Change cpu_is_omap2420() to cpu_is_omap242x() */
 953         if (cpu_is_omap2420())
 954                 cpu_mask = RATE_IN_242X;
 955         else if (cpu_is_omap2430())
 956                 cpu_mask = RATE_IN_243X;
 957
 958         for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 959                 if (!(prcm->flags & cpu_mask))
 960                         continue;
 961
 962                 if (prcm->xtal_speed != sys_ck.rate)
 963                         continue;
 964
 965                 if (prcm->mpu_speed <= rate) {
 966                         found_speed = prcm->mpu_speed;
 967                         break;
 968                 }
 969         }
 970
 971         if (!found_speed) {
 972                 printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
 973          rate / 1000000);
 974                 return -EINVAL;
 975         }
 976
 977         curr_prcm_set = prcm;
 978         cur_rate = omap2_get_dpll_rate(&dpll_ck);
 979
 980         if (prcm->dpll_speed == cur_rate / 2) {
 981                 omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
 982         } else if (prcm->dpll_speed == cur_rate * 2) {
 983                 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
 984         } else if (prcm->dpll_speed != cur_rate) {
 985                 local_irq_save(flags);
 986
 987                 if (prcm->dpll_speed == prcm->xtal_speed)
 988                         bypass = 1;
 989
 990                 if ((prcm->cm_clksel2_pll & 0x3) == 2)
 991                         done_rate = PRCM_FULL_SPEED;
 992                 else
 993                         done_rate = PRCM_HALF_SPEED;
 994
 995                 /* MPU divider */
 996                 CM_CLKSEL_MPU = prcm->cm_clksel_mpu;
 997
 998                 /* dsp + iva1 div(2420), iva2.1(2430) */
 999                 CM_CLKSEL_DSP = prcm->cm_clksel_dsp;
1000
1001                 CM_CLKSEL_GFX = prcm->cm_clksel_gfx;
1002
1003                 /* Major subsystem dividers */
1004                 CM_CLKSEL1_CORE = prcm->cm_clksel1_core;
1005                 if (cpu_is_omap2430())
1006                         CM_CLKSEL_MDM = prcm->cm_clksel_mdm;
1007
1008                 /* x2 to enter init_mem */
1009                 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
1010
1011                 omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
1012                                bypass);
1013
1014                 omap2_init_memory_params(omap2_dll_force_needed());
1015                 omap2_reprogram_sdrc(done_rate, 0);
1016
1017                 local_irq_restore(flags);
1018         }
1019         omap2_clksel_recalc(&dpll_ck);
1020
1021         return 0;
1022 }
1023
1024 /*-------------------------------------------------------------------------
1025  * Omap2 clock reset and init functions
1026  *-------------------------------------------------------------------------*/
1027
1028 #ifdef CONFIG_OMAP_RESET_CLOCKS
1029 static void __init omap2_clk_disable_unused(struct clk *clk)
1030 {
1031         u32 regval32;
1032
1033         regval32 = __raw_readl(clk->enable_reg);
1034         if ((regval32 & (1 << clk->enable_bit)) == 0)
1035                 return;
1036
1037         printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
1038         _omap2_clk_disable(clk);
1039 }
1040 #else
1041 #define omap2_clk_disable_unused        NULL
1042 #endif
1043
1044 static struct clk_functions omap2_clk_functions = {
1045         .clk_enable             = omap2_clk_enable,
1046         .clk_disable            = omap2_clk_disable,
1047         .clk_round_rate         = omap2_clk_round_rate,
1048         .clk_set_rate           = omap2_clk_set_rate,
1049         .clk_set_parent         = omap2_clk_set_parent,
1050         .clk_disable_unused     = omap2_clk_disable_unused,
1051 };
1052
1053 static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys)
1054 {
1055         u32 div, aplls, sclk = 13000000;
1056
1057         aplls = CM_CLKSEL1_PLL;
1058         aplls &= ((1 << 23) | (1 << 24) | (1 << 25));
1059         aplls >>= 23;                   /* Isolate field, 0,2,3 */
1060
1061         if (aplls == 0)
1062                 sclk = 19200000;
1063         else if (aplls == 2)
1064                 sclk = 13000000;
1065         else if (aplls == 3)
1066                 sclk = 12000000;
1067
1068         div = PRCM_CLKSRC_CTRL;
1069         div &= ((1 << 7) | (1 << 6));
1070         div >>= sys->rate_offset;
1071
1072         osc->rate = sclk * div;
1073         sys->rate = sclk;
1074 }
1075
1076 /*
1077  * Set clocks for bypass mode for reboot to work.
1078  */
1079 void omap2_clk_prepare_for_reboot(void)
1080 {
1081         u32 rate;
1082
1083         if (vclk == NULL || sclk == NULL)
1084                 return;
1085
1086         rate = clk_get_rate(sclk);
1087         clk_set_rate(vclk, rate);
1088 }
1089
1090 /*
1091  * Switch the MPU rate if specified on cmdline.
1092  * We cannot do this early until cmdline is parsed.
1093  */
1094 static int __init omap2_clk_arch_init(void)
1095 {
1096         if (!mpurate)
1097                 return -EINVAL;
1098
1099         if (omap2_select_table_rate(&virt_prcm_set, mpurate))
1100                 printk(KERN_ERR "Could not find matching MPU rate\n");
1101
1102         propagate_rate(&osc_ck);                /* update main root fast */
1103         propagate_rate(&func_32k_ck);           /* update main root slow */
1104
1105         printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
1106                "%ld.%01ld/%ld/%ld MHz\n",
1107                (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
1108                (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
1109
1110         return 0;
1111 }
1112 arch_initcall(omap2_clk_arch_init);
1113
1114 int __init omap2_clk_init(void)
1115 {
1116         struct prcm_config *prcm;
1117         struct clk ** clkp;
1118         u32 clkrate;
1119
1120         clk_init(&omap2_clk_functions);
1121         omap2_get_crystal_rate(&osc_ck, &sys_ck);
1122
1123         for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
1124              clkp++) {
1125
1126                 if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
1127                         clk_register(*clkp);
1128                         continue;
1129                 }
1130
1131                 if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
1132                         clk_register(*clkp);
1133                         continue;
1134                 }
1135         }
1136
1137         /* Check the MPU rate set by bootloader */
1138         clkrate = omap2_get_dpll_rate(&dpll_ck);
1139         for (prcm = rate_table; prcm->mpu_speed; prcm++) {
1140                 if (prcm->xtal_speed != sys_ck.rate)
1141                         continue;
1142                 if (prcm->dpll_speed <= clkrate)
1143                          break;
1144         }
1145         curr_prcm_set = prcm;
1146
1147         propagate_rate(&osc_ck);                /* update main root fast */
1148         propagate_rate(&func_32k_ck);           /* update main root slow */
1149
1150         printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
1151                "%ld.%01ld/%ld/%ld MHz\n",
1152                (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
1153                (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
1154
1155         /*
1156          * Only enable those clocks we will need, let the drivers
1157          * enable other clocks as necessary
1158          */
1159         clk_enable(&sync_32k_ick);
1160         clk_enable(&omapctrl_ick);
1161
1162         /* Force the APLLs active during bootup to avoid disabling and
1163          * enabling them unnecessarily. */
1164         clk_enable(&apll96_ck);
1165         clk_enable(&apll54_ck);
1166
1167         if (cpu_is_omap2430())
1168                 clk_enable(&sdrc_ick);
1169
1170         /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
1171         vclk = clk_get(NULL, "virt_prcm_set");
1172         sclk = clk_get(NULL, "sys_ck");
1173
1174         return 0;
1175 }
1176
1177 static int __init omap2_disable_aplls(void)
1178 {
1179         clk_disable(&apll96_ck);
1180         clk_disable(&apll54_ck);
1181
1182         return 0;
1183 }
1184 late_initcall(omap2_disable_aplls);