git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/ohci-hub.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
   6  *
   7  * This file is licenced under GPL
   8  */
   9
  10 /*-------------------------------------------------------------------------*/
  11
  12 /*
  13  * OHCI Root Hub ... the nonsharable stuff
  14  */
  15
  16 #define dbg_port(hc,label,num,value) \
  17         ohci_dbg (hc, \
  18                 "%s roothub.portstatus [%d] " \
  19                 "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
  20                 label, num, temp, \
  21                 (temp & RH_PS_PRSC) ? " PRSC" : "", \
  22                 (temp & RH_PS_OCIC) ? " OCIC" : "", \
  23                 (temp & RH_PS_PSSC) ? " PSSC" : "", \
  24                 (temp & RH_PS_PESC) ? " PESC" : "", \
  25                 (temp & RH_PS_CSC) ? " CSC" : "", \
  26                 \
  27                 (temp & RH_PS_LSDA) ? " LSDA" : "", \
  28                 (temp & RH_PS_PPS) ? " PPS" : "", \
  29                 (temp & RH_PS_PRS) ? " PRS" : "", \
  30                 (temp & RH_PS_POCI) ? " POCI" : "", \
  31                 (temp & RH_PS_PSS) ? " PSS" : "", \
  32                 \
  33                 (temp & RH_PS_PES) ? " PES" : "", \
  34                 (temp & RH_PS_CCS) ? " CCS" : "" \
  35                 );
  36
  37 /*-------------------------------------------------------------------------*/
  38
  39 /* hcd->hub_irq_enable() */
  40 static void ohci_rhsc_enable (struct usb_hcd *hcd)
  41 {
  42         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
  43
  44         spin_lock_irq(&ohci->lock);
  45         if (!ohci->autostop)
  46                 del_timer(&hcd->rh_timer);      /* Prevent next poll */
  47         ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
  48         spin_unlock_irq(&ohci->lock);
  49 }
  50
  51 #define OHCI_SCHED_ENABLES \
  52         (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
  53
  54 static void dl_done_list (struct ohci_hcd *);
  55 static void finish_unlinks (struct ohci_hcd *, u16);
  56
  57 #ifdef  CONFIG_PM
  58 static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop)
  59 __releases(ohci->lock)
  60 __acquires(ohci->lock)
  61 {
  62         int                     status = 0;
  63
  64         ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
  65         switch (ohci->hc_control & OHCI_CTRL_HCFS) {
  66         case OHCI_USB_RESUME:
  67                 ohci_dbg (ohci, "resume/suspend?\n");
  68                 ohci->hc_control &= ~OHCI_CTRL_HCFS;
  69                 ohci->hc_control |= OHCI_USB_RESET;
  70                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
  71                 (void) ohci_readl (ohci, &ohci->regs->control);
  72                 /* FALL THROUGH */
  73         case OHCI_USB_RESET:
  74                 status = -EBUSY;
  75                 ohci_dbg (ohci, "needs reinit!\n");
  76                 goto done;
  77         case OHCI_USB_SUSPEND:
  78                 if (!ohci->autostop) {
  79                         ohci_dbg (ohci, "already suspended\n");
  80                         goto done;
  81                 }
  82         }
  83         ohci_dbg (ohci, "%s root hub\n",
  84                         autostop ? "auto-stop" : "suspend");
  85
  86         /* First stop any processing */
  87         if (!autostop && (ohci->hc_control & OHCI_SCHED_ENABLES)) {
  88                 ohci->hc_control &= ~OHCI_SCHED_ENABLES;
  89                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
  90                 ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
  91                 ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrstatus);
  92
  93                 /* sched disables take effect on the next frame,
  94                  * then the last WDH could take 6+ msec
  95                  */
  96                 ohci_dbg (ohci, "stopping schedules ...\n");
  97                 ohci->autostop = 0;
  98                 spin_unlock_irq (&ohci->lock);
  99                 msleep (8);
 100                 spin_lock_irq (&ohci->lock);
 101         }
 102         dl_done_list (ohci);
 103         finish_unlinks (ohci, ohci_frame_no(ohci));
 104
 105         /* maybe resume can wake root hub */
 106         if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) {
 107                 ohci->hc_control |= OHCI_CTRL_RWE;
 108         } else {
 109                 ohci_writel(ohci, OHCI_INTR_RHSC | OHCI_INTR_RD,
 110                                 &ohci->regs->intrdisable);
 111                 ohci->hc_control &= ~OHCI_CTRL_RWE;
 112         }
 113
 114         /* Suspend hub ... this is the "global (to this bus) suspend" mode,
 115          * which doesn't imply ports will first be individually suspended.
 116          */
 117         ohci->hc_control &= ~OHCI_CTRL_HCFS;
 118         ohci->hc_control |= OHCI_USB_SUSPEND;
 119         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 120         (void) ohci_readl (ohci, &ohci->regs->control);
 121
 122         /* no resumes until devices finish suspending */
 123         if (!autostop) {
 124                 ohci->next_statechange = jiffies + msecs_to_jiffies (5);
 125                 ohci->autostop = 0;
 126         }
 127
 128 done:
 129         return status;
 130 }
 131
 132 static inline struct ed *find_head (struct ed *ed)
 133 {
 134         /* for bulk and control lists */
 135         while (ed->ed_prev)
 136                 ed = ed->ed_prev;
 137         return ed;
 138 }
 139
 140 /* caller has locked the root hub */
 141 static int ohci_rh_resume (struct ohci_hcd *ohci)
 142 __releases(ohci->lock)
 143 __acquires(ohci->lock)
 144 {
 145         struct usb_hcd          *hcd = ohci_to_hcd (ohci);
 146         u32                     temp, enables;
 147         int                     status = -EINPROGRESS;
 148         int                     autostopped = ohci->autostop;
 149
 150         ohci->autostop = 0;
 151         ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
 152
 153         if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
 154                 /* this can happen after resuming a swsusp snapshot */
 155                 if (hcd->state == HC_STATE_RESUMING) {
 156                         ohci_dbg (ohci, "BIOS/SMM active, control %03x\n",
 157                                         ohci->hc_control);
 158                         status = -EBUSY;
 159                 /* this happens when pmcore resumes HC then root */
 160                 } else {
 161                         ohci_dbg (ohci, "duplicate resume\n");
 162                         status = 0;
 163                 }
 164         } else switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 165         case OHCI_USB_SUSPEND:
 166                 ohci->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
 167                 ohci->hc_control |= OHCI_USB_RESUME;
 168                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 169                 (void) ohci_readl (ohci, &ohci->regs->control);
 170                 ohci_dbg (ohci, "%s root hub\n",
 171                                 autostopped ? "auto-start" : "resume");
 172                 break;
 173         case OHCI_USB_RESUME:
 174                 /* HCFS changes sometime after INTR_RD */
 175                 ohci_dbg(ohci, "%swakeup root hub\n",
 176                                 autostopped ? "auto-" : "");
 177                 break;
 178         case OHCI_USB_OPER:
 179                 /* this can happen after resuming a swsusp snapshot */
 180                 ohci_dbg (ohci, "snapshot resume? reinit\n");
 181                 status = -EBUSY;
 182                 break;
 183         default:                /* RESET, we lost power */
 184                 ohci_dbg (ohci, "lost power\n");
 185                 status = -EBUSY;
 186         }
 187         if (status == -EBUSY) {
 188                 if (!autostopped) {
 189                         spin_unlock_irq (&ohci->lock);
 190                         (void) ohci_init (ohci);
 191                         status = ohci_restart (ohci);
 192
 193                         usb_root_hub_lost_power(hcd->self.root_hub);
 194
 195                         spin_lock_irq (&ohci->lock);
 196                 }
 197                 return status;
 198         }
 199         if (status != -EINPROGRESS)
 200                 return status;
 201         if (autostopped)
 202                 goto skip_resume;
 203         spin_unlock_irq (&ohci->lock);
 204
 205         /* Some controllers (lucent erratum) need extra-long delays */
 206         msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
 207
 208         temp = ohci_readl (ohci, &ohci->regs->control);
 209         temp &= OHCI_CTRL_HCFS;
 210         if (temp != OHCI_USB_RESUME) {
 211                 ohci_err (ohci, "controller won't resume\n");
 212                 spin_lock_irq(&ohci->lock);
 213                 return -EBUSY;
 214         }
 215
 216         /* disable old schedule state, reinit from scratch */
 217         ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
 218         ohci_writel (ohci, 0, &ohci->regs->ed_controlcurrent);
 219         ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
 220         ohci_writel (ohci, 0, &ohci->regs->ed_bulkcurrent);
 221         ohci_writel (ohci, 0, &ohci->regs->ed_periodcurrent);
 222         ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
 223
 224         /* Sometimes PCI D3 suspend trashes frame timings ... */
 225         periodic_reinit (ohci);
 226
 227         /* the following code is executed with ohci->lock held and
 228          * irqs disabled if and only if autostopped is true
 229          */
 230
 231 skip_resume:
 232         /* interrupts might have been disabled */
 233         ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable);
 234         if (ohci->ed_rm_list)
 235                 ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable);
 236
 237         /* Then re-enable operations */
 238         ohci_writel (ohci, OHCI_USB_OPER, &ohci->regs->control);
 239         (void) ohci_readl (ohci, &ohci->regs->control);
 240         if (!autostopped)
 241                 msleep (3);
 242
 243         temp = ohci->hc_control;
 244         temp &= OHCI_CTRL_RWC;
 245         temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
 246         ohci->hc_control = temp;
 247         ohci_writel (ohci, temp, &ohci->regs->control);
 248         (void) ohci_readl (ohci, &ohci->regs->control);
 249
 250         /* TRSMRCY */
 251         if (!autostopped) {
 252                 msleep (10);
 253                 spin_lock_irq (&ohci->lock);
 254         }
 255         /* now ohci->lock is always held and irqs are always disabled */
 256
 257         /* keep it alive for more than ~5x suspend + resume costs */
 258         ohci->next_statechange = jiffies + STATECHANGE_DELAY;
 259
 260         /* maybe turn schedules back on */
 261         enables = 0;
 262         temp = 0;
 263         if (!ohci->ed_rm_list) {
 264                 if (ohci->ed_controltail) {
 265                         ohci_writel (ohci,
 266                                         find_head (ohci->ed_controltail)->dma,
 267                                         &ohci->regs->ed_controlhead);
 268                         enables |= OHCI_CTRL_CLE;
 269                         temp |= OHCI_CLF;
 270                 }
 271                 if (ohci->ed_bulktail) {
 272                         ohci_writel (ohci, find_head (ohci->ed_bulktail)->dma,
 273                                 &ohci->regs->ed_bulkhead);
 274                         enables |= OHCI_CTRL_BLE;
 275                         temp |= OHCI_BLF;
 276                 }
 277         }
 278         if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs)
 279                 enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
 280         if (enables) {
 281                 ohci_dbg (ohci, "restarting schedules ... %08x\n", enables);
 282                 ohci->hc_control |= enables;
 283                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
 284                 if (temp)
 285                         ohci_writel (ohci, temp, &ohci->regs->cmdstatus);
 286                 (void) ohci_readl (ohci, &ohci->regs->control);
 287         }
 288
 289         return 0;
 290 }
 291
 292 static int ohci_bus_suspend (struct usb_hcd *hcd)
 293 {
 294         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 295         int                     rc;
 296
 297         spin_lock_irq (&ohci->lock);
 298
 299         if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
 300                 rc = -ESHUTDOWN;
 301         else
 302                 rc = ohci_rh_suspend (ohci, 0);
 303         spin_unlock_irq (&ohci->lock);
 304         return rc;
 305 }
 306
 307 static int ohci_bus_resume (struct usb_hcd *hcd)
 308 {
 309         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 310         int                     rc;
 311
 312         if (time_before (jiffies, ohci->next_statechange))
 313                 msleep(5);
 314
 315         spin_lock_irq (&ohci->lock);
 316
 317         if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
 318                 rc = -ESHUTDOWN;
 319         else
 320                 rc = ohci_rh_resume (ohci);
 321         spin_unlock_irq (&ohci->lock);
 322
 323         /* poll until we know a device is connected or we autostop */
 324         if (rc == 0)
 325                 usb_hcd_poll_rh_status(hcd);
 326         return rc;
 327 }
 328
 329 /* Carry out the final steps of resuming the controller device */
 330 static void ohci_finish_controller_resume(struct usb_hcd *hcd)
 331 {
 332         struct ohci_hcd         *ohci = hcd_to_ohci(hcd);
 333         int                     port;
 334         bool                    need_reinit = false;
 335
 336         /* See if the controller is already running or has been reset */
 337         ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
 338         if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
 339                 need_reinit = true;
 340         } else {
 341                 switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 342                 case OHCI_USB_OPER:
 343                 case OHCI_USB_RESET:
 344                         need_reinit = true;
 345                 }
 346         }
 347
 348         /* If needed, reinitialize and suspend the root hub */
 349         if (need_reinit) {
 350                 spin_lock_irq(&ohci->lock);
 351                 hcd->state = HC_STATE_RESUMING;
 352                 ohci_rh_resume(ohci);
 353                 hcd->state = HC_STATE_QUIESCING;
 354                 ohci_rh_suspend(ohci, 0);
 355                 hcd->state = HC_STATE_SUSPENDED;
 356                 spin_unlock_irq(&ohci->lock);
 357         }
 358
 359         /* Normally just turn on port power and enable interrupts */
 360         else {
 361                 ohci_dbg(ohci, "powerup ports\n");
 362                 for (port = 0; port < ohci->num_ports; port++)
 363                         ohci_writel(ohci, RH_PS_PPS,
 364                                         &ohci->regs->roothub.portstatus[port]);
 365
 366                 ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable);
 367                 ohci_readl(ohci, &ohci->regs->intrenable);
 368                 msleep(20);
 369         }
 370 }
 371
 372 /* Carry out polling-, autostop-, and autoresume-related state changes */
 373 static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 374                 int any_connected)
 375 {
 376         int     poll_rh = 1;
 377
 378         switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 379
 380         case OHCI_USB_OPER:
 381                 /* keep on polling until we know a device is connected
 382                  * and RHSC is enabled */
 383                 if (!ohci->autostop) {
 384                         if (any_connected ||
 385                                         !device_may_wakeup(&ohci_to_hcd(ohci)
 386                                                 ->self.root_hub->dev)) {
 387                                 if (ohci_readl(ohci, &ohci->regs->intrenable) &
 388                                                 OHCI_INTR_RHSC)
 389                                         poll_rh = 0;
 390                         } else {
 391                                 ohci->autostop = 1;
 392                                 ohci->next_statechange = jiffies + HZ;
 393                         }
 394
 395                 /* if no devices have been attached for one second, autostop */
 396                 } else {
 397                         if (changed || any_connected) {
 398                                 ohci->autostop = 0;
 399                                 ohci->next_statechange = jiffies +
 400                                                 STATECHANGE_DELAY;
 401                         } else if (time_after_eq(jiffies,
 402                                                 ohci->next_statechange)
 403                                         && !ohci->ed_rm_list
 404                                         && !(ohci->hc_control &
 405                                                 OHCI_SCHED_ENABLES)) {
 406                                 ohci_rh_suspend(ohci, 1);
 407                         }
 408                 }
 409                 break;
 410
 411         /* if there is a port change, autostart or ask to be resumed */
 412         case OHCI_USB_SUSPEND:
 413         case OHCI_USB_RESUME:
 414                 if (changed) {
 415                         if (ohci->autostop)
 416                                 ohci_rh_resume(ohci);
 417                         else
 418                                 usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
 419                 } else {
 420                         /* everything is idle, no need for polling */
 421                         poll_rh = 0;
 422                 }
 423                 break;
 424         }
 425         return poll_rh;
 426 }
 427
 428 #else   /* CONFIG_PM */
 429
 430 static inline int ohci_rh_resume(struct ohci_hcd *ohci)
 431 {
 432         return 0;
 433 }
 434
 435 /* Carry out polling-related state changes.
 436  * autostop isn't used when CONFIG_PM is turned off.
 437  */
 438 static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 439                 int any_connected)
 440 {
 441         int     poll_rh = 1;
 442
 443         /* keep on polling until RHSC is enabled */
 444         if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
 445                 poll_rh = 0;
 446         return poll_rh;
 447 }
 448
 449 #endif  /* CONFIG_PM */
 450
 451 /*-------------------------------------------------------------------------*/
 452
 453 /* build "status change" packet (one or two bytes) from HC registers */
 454
 455 static int
 456 ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
 457 {
 458         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 459         int             i, changed = 0, length = 1;
 460         int             any_connected = 0;
 461         unsigned long   flags;
 462
 463         spin_lock_irqsave (&ohci->lock, flags);
 464         if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
 465                 goto done;
 466
 467         /* undocumented erratum seen on at least rev D */
 468         if ((ohci->flags & OHCI_QUIRK_AMD756)
 469                         && (roothub_a (ohci) & RH_A_NDP) > MAX_ROOT_PORTS) {
 470                 ohci_warn (ohci, "bogus NDP, rereads as NDP=%d\n",
 471                           ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP);
 472                 /* retry later; "should not happen" */
 473                 goto done;
 474         }
 475
 476         /* init status */
 477         if (roothub_status (ohci) & (RH_HS_LPSC | RH_HS_OCIC))
 478                 buf [0] = changed = 1;
 479         else
 480                 buf [0] = 0;
 481         if (ohci->num_ports > 7) {
 482                 buf [1] = 0;
 483                 length++;
 484         }
 485
 486         /* Some broken controllers never turn off RHCS in the interrupt
 487          * status register.  For their sake we won't re-enable RHSC
 488          * interrupts if the flag is already set.
 489          */
 490         if (ohci_readl(ohci, &ohci->regs->intrstatus) & OHCI_INTR_RHSC)
 491                 changed = 1;
 492
 493         /* look at each port */
 494         for (i = 0; i < ohci->num_ports; i++) {
 495                 u32     status = roothub_portstatus (ohci, i);
 496
 497                 /* can't autostop if ports are connected */
 498                 any_connected |= (status & RH_PS_CCS);
 499
 500                 if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
 501                                 | RH_PS_OCIC | RH_PS_PRSC)) {
 502                         changed = 1;
 503                         if (i < 7)
 504                             buf [0] |= 1 << (i + 1);
 505                         else
 506                             buf [1] |= 1 << (i - 7);
 507                 }
 508         }
 509
 510         hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed,
 511                         any_connected);
 512
 513 done:
 514         spin_unlock_irqrestore (&ohci->lock, flags);
 515
 516         return changed ? length : 0;
 517 }
 518
 519 /*-------------------------------------------------------------------------*/
 520
 521 static void
 522 ohci_hub_descriptor (
 523         struct ohci_hcd                 *ohci,
 524         struct usb_hub_descriptor       *desc
 525 ) {
 526         u32             rh = roothub_a (ohci);
 527         u16             temp;
 528
 529         desc->bDescriptorType = 0x29;
 530         desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24;
 531         desc->bHubContrCurrent = 0;
 532
 533         desc->bNbrPorts = ohci->num_ports;
 534         temp = 1 + (ohci->num_ports / 8);
 535         desc->bDescLength = 7 + 2 * temp;
 536
 537         temp = 0;
 538         if (rh & RH_A_NPS)              /* no power switching? */
 539             temp |= 0x0002;
 540         if (rh & RH_A_PSM)              /* per-port power switching? */
 541             temp |= 0x0001;
 542         if (rh & RH_A_NOCP)             /* no overcurrent reporting? */
 543             temp |= 0x0010;
 544         else if (rh & RH_A_OCPM)        /* per-port overcurrent reporting? */
 545             temp |= 0x0008;
 546         desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ohci, temp);
 547
 548         /* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
 549         rh = roothub_b (ohci);
 550         memset(desc->bitmap, 0xff, sizeof(desc->bitmap));
 551         desc->bitmap [0] = rh & RH_B_DR;
 552         if (ohci->num_ports > 7) {
 553                 desc->bitmap [1] = (rh & RH_B_DR) >> 8;
 554                 desc->bitmap [2] = 0xff;
 555         } else
 556                 desc->bitmap [1] = 0xff;
 557 }
 558
 559 /*-------------------------------------------------------------------------*/
 560
 561 #ifdef  CONFIG_USB_OTG
 562
 563 static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port)
 564 {
 565         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 566         u32                     status;
 567
 568         if (!port)
 569                 return -EINVAL;
 570         port--;
 571
 572         /* start port reset before HNP protocol times out */
 573         status = ohci_readl(ohci, &ohci->regs->roothub.portstatus [port]);
 574         if (!(status & RH_PS_CCS))
 575                 return -ENODEV;
 576
 577         /* khubd will finish the reset later */
 578         ohci_writel(ohci, RH_PS_PRS, &ohci->regs->roothub.portstatus [port]);
 579         return 0;
 580 }
 581
 582 #else
 583
 584 #define ohci_start_port_reset           NULL
 585
 586 #endif
 587
 588 /*-------------------------------------------------------------------------*/
 589
 590
 591 /* See usb 7.1.7.5:  root hubs must issue at least 50 msec reset signaling,
 592  * not necessarily continuous ... to guard against resume signaling.
 593  * The short timeout is safe for non-root hubs, and is backward-compatible
 594  * with earlier Linux hosts.
 595  */
 596 #ifdef  CONFIG_USB_SUSPEND
 597 #define PORT_RESET_MSEC         50
 598 #else
 599 #define PORT_RESET_MSEC         10
 600 #endif
 601
 602 /* this timer value might be vendor-specific ... */
 603 #define PORT_RESET_HW_MSEC      10
 604
 605 /* wrap-aware logic morphed from <linux/jiffies.h> */
 606 #define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
 607
 608 /* called from some task, normally khubd */
 609 static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
 610 {
 611         __hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
 612         u32     temp = 0;
 613         u16     now = ohci_readl(ohci, &ohci->regs->fmnumber);
 614         u16     reset_done = now + PORT_RESET_MSEC;
 615         int     limit_1 = DIV_ROUND_UP(PORT_RESET_MSEC, PORT_RESET_HW_MSEC);
 616
 617         /* build a "continuous enough" reset signal, with up to
 618          * 3msec gap between pulses.  scheduler HZ==100 must work;
 619          * this might need to be deadline-scheduled.
 620          */
 621         do {
 622                 int limit_2;
 623
 624                 /* spin until any current reset finishes */
 625                 limit_2 = PORT_RESET_HW_MSEC * 2;
 626                 while (--limit_2 >= 0) {
 627                         temp = ohci_readl (ohci, portstat);
 628                         /* handle e.g. CardBus eject */
 629                         if (temp == ~(u32)0)
 630                                 return -ESHUTDOWN;
 631                         if (!(temp & RH_PS_PRS))
 632                                 break;
 633                         udelay (500);
 634                 }
 635
 636                 /* timeout (a hardware error) has been observed when
 637                  * EHCI sets CF while this driver is resetting a port;
 638                  * presumably other disconnect paths might do it too.
 639                  */
 640                 if (limit_2 < 0) {
 641                         ohci_dbg(ohci,
 642                                 "port[%d] reset timeout, stat %08x\n",
 643                                 port, temp);
 644                         break;
 645                 }
 646
 647                 if (!(temp & RH_PS_CCS))
 648                         break;
 649                 if (temp & RH_PS_PRSC)
 650                         ohci_writel (ohci, RH_PS_PRSC, portstat);
 651
 652                 /* start the next reset, sleep till it's probably done */
 653                 ohci_writel (ohci, RH_PS_PRS, portstat);
 654                 msleep(PORT_RESET_HW_MSEC);
 655                 now = ohci_readl(ohci, &ohci->regs->fmnumber);
 656         } while (tick_before(now, reset_done) && --limit_1 >= 0);
 657
 658         /* caller synchronizes using PRSC ... and handles PRS
 659          * still being set when this returns.
 660          */
 661
 662         return 0;
 663 }
 664
 665 static int ohci_hub_control (
 666         struct usb_hcd  *hcd,
 667         u16             typeReq,
 668         u16             wValue,
 669         u16             wIndex,
 670         char            *buf,
 671         u16             wLength
 672 ) {
 673         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 674         int             ports = hcd_to_bus (hcd)->root_hub->maxchild;
 675         u32             temp;
 676         int             retval = 0;
 677
 678         if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
 679                 return -ESHUTDOWN;
 680
 681         switch (typeReq) {
 682         case ClearHubFeature:
 683                 switch (wValue) {
 684                 case C_HUB_OVER_CURRENT:
 685                         ohci_writel (ohci, RH_HS_OCIC,
 686                                         &ohci->regs->roothub.status);
 687                 case C_HUB_LOCAL_POWER:
 688                         break;
 689                 default:
 690                         goto error;
 691                 }
 692                 break;
 693         case ClearPortFeature:
 694                 if (!wIndex || wIndex > ports)
 695                         goto error;
 696                 wIndex--;
 697
 698                 switch (wValue) {
 699                 case USB_PORT_FEAT_ENABLE:
 700                         temp = RH_PS_CCS;
 701                         break;
 702                 case USB_PORT_FEAT_C_ENABLE:
 703                         temp = RH_PS_PESC;
 704                         break;
 705                 case USB_PORT_FEAT_SUSPEND:
 706                         temp = RH_PS_POCI;
 707                         break;
 708                 case USB_PORT_FEAT_C_SUSPEND:
 709                         temp = RH_PS_PSSC;
 710                         break;
 711                 case USB_PORT_FEAT_POWER:
 712                         temp = RH_PS_LSDA;
 713                         break;
 714                 case USB_PORT_FEAT_C_CONNECTION:
 715                         temp = RH_PS_CSC;
 716                         break;
 717                 case USB_PORT_FEAT_C_OVER_CURRENT:
 718                         temp = RH_PS_OCIC;
 719                         break;
 720                 case USB_PORT_FEAT_C_RESET:
 721                         temp = RH_PS_PRSC;
 722                         break;
 723                 default:
 724                         goto error;
 725                 }
 726                 ohci_writel (ohci, temp,
 727                                 &ohci->regs->roothub.portstatus [wIndex]);
 728                 // ohci_readl (ohci, &ohci->regs->roothub.portstatus [wIndex]);
 729                 break;
 730         case GetHubDescriptor:
 731                 ohci_hub_descriptor (ohci, (struct usb_hub_descriptor *) buf);
 732                 break;
 733         case GetHubStatus:
 734                 temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE);
 735                 put_unaligned_le32(temp, buf);
 736                 break;
 737         case GetPortStatus:
 738                 if (!wIndex || wIndex > ports)
 739                         goto error;
 740                 wIndex--;
 741                 temp = roothub_portstatus (ohci, wIndex);
 742                 put_unaligned_le32(temp, buf);
 743
 744 #ifndef OHCI_VERBOSE_DEBUG
 745         if (*(u16*)(buf+2))     /* only if wPortChange is interesting */
 746 #endif
 747                 dbg_port (ohci, "GetStatus", wIndex, temp);
 748                 break;
 749         case SetHubFeature:
 750                 switch (wValue) {
 751                 case C_HUB_OVER_CURRENT:
 752                         // FIXME:  this can be cleared, yes?
 753                 case C_HUB_LOCAL_POWER:
 754                         break;
 755                 default:
 756                         goto error;
 757                 }
 758                 break;
 759         case SetPortFeature:
 760                 if (!wIndex || wIndex > ports)
 761                         goto error;
 762                 wIndex--;
 763                 switch (wValue) {
 764                 case USB_PORT_FEAT_SUSPEND:
 765 #ifdef  CONFIG_USB_OTG
 766                         if (hcd->self.otg_port == (wIndex + 1)
 767                                         && hcd->self.b_hnp_enable)
 768                                 ohci->start_hnp(ohci);
 769                         else
 770 #endif
 771                         ohci_writel (ohci, RH_PS_PSS,
 772                                 &ohci->regs->roothub.portstatus [wIndex]);
 773                         break;
 774                 case USB_PORT_FEAT_POWER:
 775                         ohci_writel (ohci, RH_PS_PPS,
 776                                 &ohci->regs->roothub.portstatus [wIndex]);
 777                         break;
 778                 case USB_PORT_FEAT_RESET:
 779                         retval = root_port_reset (ohci, wIndex);
 780                         break;
 781                 default:
 782                         goto error;
 783                 }
 784                 break;
 785
 786         default:
 787 error:
 788                 /* "protocol stall" on error */
 789                 retval = -EPIPE;
 790         }
 791         return retval;
 792 }
 793